[SCSI] aacraid: add user initiated reset
Add the ability for an application to issue a hardware reset to the
adapter via sysfs. Typical uses include restarting the adapter after it
has been flashed. Bumped revision number for the driver and added a
feature to periodically check the adapter's health (check_interval),
update the adapter's concept of time (update_interval) and block
checking/resetting of the adapter (check_reset).
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 6f92d07..f8c2aaf 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -39,10 +39,8 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
#include <linux/syscalls.h>
#include <linux/delay.h>
-#include <linux/smp_lock.h>
#include <linux/kthread.h>
#include <asm/semaphore.h>
@@ -581,6 +579,14 @@
ssleep(1);
}
printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
+ /*
+ * This adapter needs a blind reset, only do so for Adapters that
+ * support a register, instead of a commanded, reset.
+ */
+ if ((aac->supplement_adapter_info.SupportedOptions2 &
+ le32_to_cpu(AAC_OPTION_MU_RESET|AAC_OPTION_IGNORE_RESET)) ==
+ le32_to_cpu(AAC_OPTION_MU_RESET))
+ aac_reset_adapter(aac, 2); /* Bypass wait for command quiesce */
return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */
}
@@ -788,6 +794,31 @@
class_to_shost(class_dev)->max_id);
}
+static ssize_t aac_store_reset_adapter(struct class_device *class_dev,
+ const char *buf, size_t count)
+{
+ int retval = -EACCES;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return retval;
+ retval = aac_reset_adapter((struct aac_dev*)class_to_shost(class_dev)->hostdata, buf[0] == '!');
+ if (retval >= 0)
+ retval = count;
+ return retval;
+}
+
+static ssize_t aac_show_reset_adapter(struct class_device *class_dev,
+ char *buf)
+{
+ struct aac_dev *dev = (struct aac_dev*)class_to_shost(class_dev)->hostdata;
+ int len, tmp;
+
+ tmp = aac_adapter_check_health(dev);
+ if ((tmp == 0) && dev->in_reset)
+ tmp = -EBUSY;
+ len = snprintf(buf, PAGE_SIZE, "0x%x", tmp);
+ return len;
+}
static struct class_device_attribute aac_model = {
.attr = {
@@ -845,6 +876,14 @@
},
.show = aac_show_max_id,
};
+static struct class_device_attribute aac_reset = {
+ .attr = {
+ .name = "reset_host",
+ .mode = S_IWUSR|S_IRUGO,
+ },
+ .store = aac_store_reset_adapter,
+ .show = aac_show_reset_adapter,
+};
static struct class_device_attribute *aac_attrs[] = {
&aac_model,
@@ -855,6 +894,7 @@
&aac_serial_number,
&aac_max_channel,
&aac_max_id,
+ &aac_reset,
NULL
};
@@ -1118,7 +1158,7 @@
{
int error;
- printk(KERN_INFO "Adaptec %s driver (%s)\n",
+ printk(KERN_INFO "Adaptec %s driver %s\n",
AAC_DRIVERNAME, aac_driver_version);
error = pci_register_driver(&aac_pci_driver);
