hwmon: Add tempX_emergency attribute to sysfs ABI
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 48ceabe..6456990 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -309,6 +309,20 @@
from the critical value.
RW
+temp[1-*]_emergency
+ Temperature emergency max value, for chips supporting more than
+ two upper temperature limits. Must be equal or greater than
+ corresponding temp_crit values.
+ Unit: millidegree Celsius
+ RW
+
+temp[1-*]_emergency_hyst
+ Temperature hysteresis value for emergency limit.
+ Unit: millidegree Celsius
+ Must be reported as an absolute temperature, NOT a delta
+ from the emergency value.
+ RW
+
temp[1-*]_lcrit Temperature critical min value, typically lower than
corresponding temp_min values.
Unit: millidegree Celsius
@@ -505,6 +519,7 @@
temp[1-*]_min_alarm
temp[1-*]_max_alarm
temp[1-*]_crit_alarm
+temp[1-*]_emergency_alarm
Limit alarm
0: no alarm
1: alarm
