Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e2fea58..3ed3ff0 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -201,7 +201,7 @@
as clock request handshaking.
This driver uses board-specific data to initialize the resources
- and load scripts controling which resources are switched off/on
+ and load scripts controlling which resources are switched off/on
or reset when a sleep, wakeup or warm reset event occurs.
config TWL4030_CODEC
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index bc93b2e..6421ad1 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -314,7 +314,7 @@
/* wait for completion of conversion */
if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) {
dev_err(gpadc->dev,
- "timeout: didnt recieve GPADC conversion interrupt\n");
+ "timeout: didn't receive GPADC conversion interrupt\n");
ret = -EINVAL;
goto out;
}
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index f2f4029..43a76c4 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -185,7 +185,7 @@
ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
- /* We cant service/ack irqs that are assigned to port 2 */
+ /* We can't service/ack irqs that are assigned to port 2 */
if (!(pdata->config & PCAP_SECOND_PORT)) {
ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
isr &= ~int_sel;
@@ -457,7 +457,7 @@
pcap->workqueue = create_singlethread_workqueue("pcapd");
if (!pcap->workqueue) {
ret = -ENOMEM;
- dev_err(&spi->dev, "cant create pcap thread\n");
+ dev_err(&spi->dev, "can't create pcap thread\n");
goto free_pcap;
}
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index cb01209..53450f4 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -332,7 +332,7 @@
int i;
if (!pdata) {
- dev_err(dev, "Missing platfrom data\n");
+ dev_err(dev, "Missing platform data\n");
ret = -ENOMEM;
goto end_probe;
}
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index c7687f6..57868416 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -51,7 +51,7 @@
}
-/* Read a block of upto 32 regs */
+/* Read a block of up to 32 regs */
int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
int nr_regs, u8 *data)
{
@@ -65,7 +65,7 @@
}
EXPORT_SYMBOL_GPL(pcf50633_read_block);
-/* Write a block of upto 32 regs */
+/* Write a block of up to 32 regs */
int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
int nr_regs, u8 *data)
{
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index fa93705..dfbae34 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -229,7 +229,7 @@
twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
REG_INT_MSK_STS_B);
/*
- * Intially Configuring MMC_CTRL for receving interrupts &
+ * Initially Configuring MMC_CTRL for receiving interrupts &
* Card status on TWL6030 for MMC1
*/
ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL);
@@ -275,7 +275,7 @@
/* TWL6030 provide's Card detect support for
* only MMC1 controller.
*/
- pr_err("Unkown MMC controller %d in %s\n", pdev->id, __func__);
+ pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
return ret;
}
/*
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index d73f84b..daf6952 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -8,7 +8,7 @@
* Copyright: MontaVista Software, Inc.
*
* Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesnt work and it worked before spliting, e-mail me,
+ * If something doesn't work and it worked before spliting, e-mail me,
* dont bother Nicolas please ;-)
*
* This program is free software; you can redistribute it and/or modify
