diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 837dc82..a06dfb1 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -128,9 +128,9 @@
 int acpi_request_vector (u32 int_type);
 int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
 
-/* routines for saving/restoring kernel state */
-extern int acpi_save_state_mem(void);
-extern void acpi_restore_state_mem(void);
+/* Low-level suspend routine. */
+extern int acpi_suspend_lowlevel(void);
+
 extern unsigned long acpi_wakeup_address;
 
 /*
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 90ebceb..a54d054 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -1034,18 +1034,8 @@
 EXPORT_SYMBOL(acpi_unregister_ioapic);
 
 /*
- * acpi_save_state_mem() - save kernel state
+ * acpi_suspend_lowlevel() - save kernel state and suspend.
  *
  * TBD when when IA64 starts to support suspend...
  */
-int acpi_save_state_mem(void) { return 0; } 
-
-/*
- * acpi_restore_state()
- */
-void acpi_restore_state_mem(void) {}
-
-/*
- * do_suspend_lowlevel()
- */
-void do_suspend_lowlevel(void) {}
+int acpi_suspend_lowlevel(void) { return 0; }
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 4ea15ca..ef14da1 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -113,9 +113,8 @@
 	acpi_noirq_set();
 }
 
-/* routines for saving/restoring kernel state */
-extern int acpi_save_state_mem(void);
-extern void acpi_restore_state_mem(void);
+/* Low-level suspend routine. */
+extern int acpi_suspend_lowlevel(void);
 
 extern unsigned long acpi_wakeup_address;
 
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 68d1537..5f1b747 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -29,14 +29,14 @@
 #endif
 
 /**
- * acpi_save_state_mem - save kernel state
+ * acpi_suspend_lowlevel - save kernel state
  *
  * Create an identity mapped page table and copy the wakeup routine to
  * low memory.
  *
  * Note that this is too late to change acpi_wakeup_address.
  */
-int acpi_save_state_mem(void)
+int acpi_suspend_lowlevel(void)
 {
 	struct wakeup_header *header;
 
@@ -107,17 +107,10 @@
        saved_magic = 0x123456789abcdef0L;
 #endif /* CONFIG_64BIT */
 
+	do_suspend_lowlevel();
 	return 0;
 }
 
-/*
- * acpi_restore_state - undo effects of acpi_save_state_mem
- */
-void acpi_restore_state_mem(void)
-{
-}
-
-
 /**
  * acpi_reserve_wakeup_memory - do _very_ early ACPI initialisation
  *
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
index adbcbaa..31ce13f 100644
--- a/arch/x86/kernel/acpi/sleep.h
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -14,3 +14,5 @@
 
 extern unsigned long acpi_copy_wakeup_routine(unsigned long);
 extern void wakeup_long64(void);
+
+extern void do_suspend_lowlevel(void);
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index eec2ead..a122471 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -10,7 +10,7 @@
 
 acpi-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
 	 dsmethod.o  dsobject.o  dsutils.o   dswload.o  dswstate.o \
-	 dsinit.o
+	 dsinit.o dsargs.o dscontrol.o dswload2.o
 
 acpi-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
 	 evmisc.o   evrgnini.o  evxface.o  evxfregn.o \
@@ -45,4 +45,4 @@
 acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
 		utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
 		utstate.o utmutex.o utobject.o utresrc.o utlock.o utids.o \
-		utosi.o utxferror.o
+		utosi.o utxferror.o utdecode.o
diff --git a/drivers/acpi/acpica/acdispat.h b/drivers/acpi/acpica/acdispat.h
index 666271b..2d1b7ff 100644
--- a/drivers/acpi/acpica/acdispat.h
+++ b/drivers/acpi/acpica/acdispat.h
@@ -48,7 +48,7 @@
 #define NAMEOF_ARG_NTE      "__A0"
 
 /*
- * dsopcode - support for late evaluation
+ * dsargs - execution of dynamic arguments for static objects
  */
 acpi_status
 acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc);
@@ -62,6 +62,20 @@
 
 acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc);
 
+/*
+ * dscontrol - support for execution control opcodes
+ */
+acpi_status
+acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
+			      union acpi_parse_object *op);
+
+acpi_status
+acpi_ds_exec_end_control_op(struct acpi_walk_state *walk_state,
+			    union acpi_parse_object *op);
+
+/*
+ * dsopcode - support for late operand evaluation
+ */
 acpi_status
 acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
 				   union acpi_parse_object *op);
@@ -86,17 +100,6 @@
 acpi_status acpi_ds_initialize_region(acpi_handle obj_handle);
 
 /*
- * dsctrl - Parser/Interpreter interface, control stack routines
- */
-acpi_status
-acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
-			      union acpi_parse_object *op);
-
-acpi_status
-acpi_ds_exec_end_control_op(struct acpi_walk_state *walk_state,
-			    union acpi_parse_object *op);
-
-/*
  * dsexec - Parser/Interpreter interface, method execution callbacks
  */
 acpi_status
@@ -136,23 +139,26 @@
 			   struct acpi_walk_state *walk_state);
 
 /*
- * dsload - Parser/Interpreter interface, namespace load callbacks
+ * dsload - Parser/Interpreter interface, pass 1 namespace load callbacks
  */
 acpi_status
+acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number);
+
+acpi_status
 acpi_ds_load1_begin_op(struct acpi_walk_state *walk_state,
 		       union acpi_parse_object **out_op);
 
 acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state);
 
+/*
+ * dsload - Parser/Interpreter interface, pass 2 namespace load callbacks
+ */
 acpi_status
 acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
 		       union acpi_parse_object **out_op);
 
 acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state);
 
-acpi_status
-acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number);
-
 /*
  * dsmthdat - method data (locals/args)
  */
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 82a1bd2..d69750b 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -273,6 +273,10 @@
 ACPI_EXTERN u8 acpi_gbl_last_owner_id_index;
 ACPI_EXTERN u8 acpi_gbl_next_owner_id_offset;
 
+/* Initialization sequencing */
+
+ACPI_EXTERN u8 acpi_gbl_reg_methods_executed;
+
 /* Misc */
 
 ACPI_EXTERN u32 acpi_gbl_original_mode;
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 54784bb..c7f743c 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -89,25 +89,6 @@
 #define ACPI_MAX_MUTEX                  7
 #define ACPI_NUM_MUTEX                  ACPI_MAX_MUTEX+1
 
-#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
-#ifdef DEFINE_ACPI_GLOBALS
-
-/* Debug names for the mutexes above */
-
-static char *acpi_gbl_mutex_names[ACPI_NUM_MUTEX] = {
-	"ACPI_MTX_Interpreter",
-	"ACPI_MTX_Namespace",
-	"ACPI_MTX_Tables",
-	"ACPI_MTX_Events",
-	"ACPI_MTX_Caches",
-	"ACPI_MTX_Memory",
-	"ACPI_MTX_CommandComplete",
-	"ACPI_MTX_CommandReady"
-};
-
-#endif
-#endif
-
 /* Lock structure for reader/writer interfaces */
 
 struct acpi_rw_lock {
@@ -416,10 +397,15 @@
 	u8 originally_enabled;  /* True if GPE was originally enabled */
 };
 
+struct acpi_gpe_notify_object {
+	struct acpi_namespace_node *node;
+	struct acpi_gpe_notify_object *next;
+};
+
 union acpi_gpe_dispatch_info {
 	struct acpi_namespace_node *method_node;	/* Method node for this GPE level */
 	struct acpi_gpe_handler_info *handler;  /* Installed GPE handler */
-	struct acpi_namespace_node *device_node;        /* Parent _PRW device for implicit notify */
+	struct acpi_gpe_notify_object device;   /* List of _PRW devices for implicit notify */
 };
 
 /*
diff --git a/drivers/acpi/acpica/dsargs.c b/drivers/acpi/acpica/dsargs.c
new file mode 100644
index 0000000..8c7b997
--- /dev/null
+++ b/drivers/acpi/acpica/dsargs.c
@@ -0,0 +1,391 @@
+/******************************************************************************
+ *
+ * Module Name: dsargs - Support for execution of dynamic arguments for static
+ *                       objects (regions, fields, buffer fields, etc.)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acparser.h"
+#include "amlcode.h"
+#include "acdispat.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_DISPATCHER
+ACPI_MODULE_NAME("dsargs")
+
+/* Local prototypes */
+static acpi_status
+acpi_ds_execute_arguments(struct acpi_namespace_node *node,
+			  struct acpi_namespace_node *scope_node,
+			  u32 aml_length, u8 *aml_start);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_execute_arguments
+ *
+ * PARAMETERS:  Node                - Object NS node
+ *              scope_node          - Parent NS node
+ *              aml_length          - Length of executable AML
+ *              aml_start           - Pointer to the AML
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Late (deferred) execution of region or field arguments
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ds_execute_arguments(struct acpi_namespace_node *node,
+			  struct acpi_namespace_node *scope_node,
+			  u32 aml_length, u8 *aml_start)
+{
+	acpi_status status;
+	union acpi_parse_object *op;
+	struct acpi_walk_state *walk_state;
+
+	ACPI_FUNCTION_TRACE(ds_execute_arguments);
+
+	/* Allocate a new parser op to be the root of the parsed tree */
+
+	op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
+	if (!op) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	/* Save the Node for use in acpi_ps_parse_aml */
+
+	op->common.node = scope_node;
+
+	/* Create and initialize a new parser state */
+
+	walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
+	if (!walk_state) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
+				       aml_length, NULL, ACPI_IMODE_LOAD_PASS1);
+	if (ACPI_FAILURE(status)) {
+		acpi_ds_delete_walk_state(walk_state);
+		goto cleanup;
+	}
+
+	/* Mark this parse as a deferred opcode */
+
+	walk_state->parse_flags = ACPI_PARSE_DEFERRED_OP;
+	walk_state->deferred_node = node;
+
+	/* Pass1: Parse the entire declaration */
+
+	status = acpi_ps_parse_aml(walk_state);
+	if (ACPI_FAILURE(status)) {
+		goto cleanup;
+	}
+
+	/* Get and init the Op created above */
+
+	op->common.node = node;
+	acpi_ps_delete_parse_tree(op);
+
+	/* Evaluate the deferred arguments */
+
+	op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
+	if (!op) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	op->common.node = scope_node;
+
+	/* Create and initialize a new parser state */
+
+	walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
+	if (!walk_state) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	/* Execute the opcode and arguments */
+
+	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
+				       aml_length, NULL, ACPI_IMODE_EXECUTE);
+	if (ACPI_FAILURE(status)) {
+		acpi_ds_delete_walk_state(walk_state);
+		goto cleanup;
+	}
+
+	/* Mark this execution as a deferred opcode */
+
+	walk_state->deferred_node = node;
+	status = acpi_ps_parse_aml(walk_state);
+
+      cleanup:
+	acpi_ps_delete_parse_tree(op);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_buffer_field_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid buffer_field object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get buffer_field Buffer and Index. This implements the late
+ *              evaluation of these field attributes.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc)
+{
+	union acpi_operand_object *extra_desc;
+	struct acpi_namespace_node *node;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_field_arguments, obj_desc);
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Get the AML pointer (method object) and buffer_field node */
+
+	extra_desc = acpi_ns_get_secondary_object(obj_desc);
+	node = obj_desc->buffer_field.node;
+
+	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname(ACPI_TYPE_BUFFER_FIELD,
+						      node, NULL));
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n",
+			  acpi_ut_get_node_name(node)));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments(node, node->parent,
+					   extra_desc->extra.aml_length,
+					   extra_desc->extra.aml_start);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_bank_field_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid bank_field object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get bank_field bank_value. This implements the late
+ *              evaluation of these field attributes.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_get_bank_field_arguments(union acpi_operand_object *obj_desc)
+{
+	union acpi_operand_object *extra_desc;
+	struct acpi_namespace_node *node;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_bank_field_arguments, obj_desc);
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Get the AML pointer (method object) and bank_field node */
+
+	extra_desc = acpi_ns_get_secondary_object(obj_desc);
+	node = obj_desc->bank_field.node;
+
+	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
+			(ACPI_TYPE_LOCAL_BANK_FIELD, node, NULL));
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BankField Arg Init\n",
+			  acpi_ut_get_node_name(node)));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments(node, node->parent,
+					   extra_desc->extra.aml_length,
+					   extra_desc->extra.aml_start);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_buffer_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid Buffer object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get Buffer length and initializer byte list. This implements
+ *              the late evaluation of these attributes.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc)
+{
+	struct acpi_namespace_node *node;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_arguments, obj_desc);
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Get the Buffer node */
+
+	node = obj_desc->buffer.node;
+	if (!node) {
+		ACPI_ERROR((AE_INFO,
+			    "No pointer back to namespace node in buffer object %p",
+			    obj_desc));
+		return_ACPI_STATUS(AE_AML_INTERNAL);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Buffer Arg Init\n"));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments(node, node,
+					   obj_desc->buffer.aml_length,
+					   obj_desc->buffer.aml_start);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_package_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid Package object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get Package length and initializer byte list. This implements
+ *              the late evaluation of these attributes.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc)
+{
+	struct acpi_namespace_node *node;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_package_arguments, obj_desc);
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Get the Package node */
+
+	node = obj_desc->package.node;
+	if (!node) {
+		ACPI_ERROR((AE_INFO,
+			    "No pointer back to namespace node in package %p",
+			    obj_desc));
+		return_ACPI_STATUS(AE_AML_INTERNAL);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Package Arg Init\n"));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments(node, node,
+					   obj_desc->package.aml_length,
+					   obj_desc->package.aml_start);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_region_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid region object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get region address and length. This implements the late
+ *              evaluation of these region attributes.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
+{
+	struct acpi_namespace_node *node;
+	acpi_status status;
+	union acpi_operand_object *extra_desc;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_region_arguments, obj_desc);
+
+	if (obj_desc->region.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	extra_desc = acpi_ns_get_secondary_object(obj_desc);
+	if (!extra_desc) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
+	/* Get the Region node */
+
+	node = obj_desc->region.node;
+
+	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
+			(ACPI_TYPE_REGION, node, NULL));
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n",
+			  acpi_ut_get_node_name(node),
+			  extra_desc->extra.aml_start));
+
+	/* Execute the argument AML */
+
+	status = acpi_ds_execute_arguments(node, node->parent,
+					   extra_desc->extra.aml_length,
+					   extra_desc->extra.aml_start);
+	return_ACPI_STATUS(status);
+}
diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c
new file mode 100644
index 0000000..26c49ff
--- /dev/null
+++ b/drivers/acpi/acpica/dscontrol.c
@@ -0,0 +1,410 @@
+/******************************************************************************
+ *
+ * Module Name: dscontrol - Support for execution control opcodes -
+ *                          if/else/while/return
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "amlcode.h"
+#include "acdispat.h"
+#include "acinterp.h"
+
+#define _COMPONENT          ACPI_DISPATCHER
+ACPI_MODULE_NAME("dscontrol")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_begin_control_op
+ *
+ * PARAMETERS:  walk_list       - The list that owns the walk stack
+ *              Op              - The control Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handles all control ops encountered during control method
+ *              execution.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
+			      union acpi_parse_object *op)
+{
+	acpi_status status = AE_OK;
+	union acpi_generic_state *control_state;
+
+	ACPI_FUNCTION_NAME(ds_exec_begin_control_op);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n",
+			  op, op->common.aml_opcode, walk_state));
+
+	switch (op->common.aml_opcode) {
+	case AML_WHILE_OP:
+
+		/*
+		 * If this is an additional iteration of a while loop, continue.
+		 * There is no need to allocate a new control state.
+		 */
+		if (walk_state->control_state) {
+			if (walk_state->control_state->control.
+			    aml_predicate_start ==
+			    (walk_state->parser_state.aml - 1)) {
+
+				/* Reset the state to start-of-loop */
+
+				walk_state->control_state->common.state =
+				    ACPI_CONTROL_CONDITIONAL_EXECUTING;
+				break;
+			}
+		}
+
+		/*lint -fallthrough */
+
+	case AML_IF_OP:
+
+		/*
+		 * IF/WHILE: Create a new control state to manage these
+		 * constructs. We need to manage these as a stack, in order
+		 * to handle nesting.
+		 */
+		control_state = acpi_ut_create_control_state();
+		if (!control_state) {
+			status = AE_NO_MEMORY;
+			break;
+		}
+		/*
+		 * Save a pointer to the predicate for multiple executions
+		 * of a loop
+		 */
+		control_state->control.aml_predicate_start =
+		    walk_state->parser_state.aml - 1;
+		control_state->control.package_end =
+		    walk_state->parser_state.pkg_end;
+		control_state->control.opcode = op->common.aml_opcode;
+
+		/* Push the control state on this walk's control stack */
+
+		acpi_ut_push_generic_state(&walk_state->control_state,
+					   control_state);
+		break;
+
+	case AML_ELSE_OP:
+
+		/* Predicate is in the state object */
+		/* If predicate is true, the IF was executed, ignore ELSE part */
+
+		if (walk_state->last_predicate) {
+			status = AE_CTRL_TRUE;
+		}
+
+		break;
+
+	case AML_RETURN_OP:
+
+		break;
+
+	default:
+		break;
+	}
+
+	return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_end_control_op
+ *
+ * PARAMETERS:  walk_list       - The list that owns the walk stack
+ *              Op              - The control Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handles all control ops encountered during control method
+ *              execution.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
+			    union acpi_parse_object * op)
+{
+	acpi_status status = AE_OK;
+	union acpi_generic_state *control_state;
+
+	ACPI_FUNCTION_NAME(ds_exec_end_control_op);
+
+	switch (op->common.aml_opcode) {
+	case AML_IF_OP:
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op));
+
+		/*
+		 * Save the result of the predicate in case there is an
+		 * ELSE to come
+		 */
+		walk_state->last_predicate =
+		    (u8)walk_state->control_state->common.value;
+
+		/*
+		 * Pop the control state that was created at the start
+		 * of the IF and free it
+		 */
+		control_state =
+		    acpi_ut_pop_generic_state(&walk_state->control_state);
+		acpi_ut_delete_generic_state(control_state);
+		break;
+
+	case AML_ELSE_OP:
+
+		break;
+
+	case AML_WHILE_OP:
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op));
+
+		control_state = walk_state->control_state;
+		if (control_state->common.value) {
+
+			/* Predicate was true, the body of the loop was just executed */
+
+			/*
+			 * This loop counter mechanism allows the interpreter to escape
+			 * possibly infinite loops. This can occur in poorly written AML
+			 * when the hardware does not respond within a while loop and the
+			 * loop does not implement a timeout.
+			 */
+			control_state->control.loop_count++;
+			if (control_state->control.loop_count >
+			    ACPI_MAX_LOOP_ITERATIONS) {
+				status = AE_AML_INFINITE_LOOP;
+				break;
+			}
+
+			/*
+			 * Go back and evaluate the predicate and maybe execute the loop
+			 * another time
+			 */
+			status = AE_CTRL_PENDING;
+			walk_state->aml_last_while =
+			    control_state->control.aml_predicate_start;
+			break;
+		}
+
+		/* Predicate was false, terminate this while loop */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "[WHILE_OP] termination! Op=%p\n", op));
+
+		/* Pop this control state and free it */
+
+		control_state =
+		    acpi_ut_pop_generic_state(&walk_state->control_state);
+		acpi_ut_delete_generic_state(control_state);
+		break;
+
+	case AML_RETURN_OP:
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "[RETURN_OP] Op=%p Arg=%p\n", op,
+				  op->common.value.arg));
+
+		/*
+		 * One optional operand -- the return value
+		 * It can be either an immediate operand or a result that
+		 * has been bubbled up the tree
+		 */
+		if (op->common.value.arg) {
+
+			/* Since we have a real Return(), delete any implicit return */
+
+			acpi_ds_clear_implicit_return(walk_state);
+
+			/* Return statement has an immediate operand */
+
+			status =
+			    acpi_ds_create_operands(walk_state,
+						    op->common.value.arg);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+
+			/*
+			 * If value being returned is a Reference (such as
+			 * an arg or local), resolve it now because it may
+			 * cease to exist at the end of the method.
+			 */
+			status =
+			    acpi_ex_resolve_to_value(&walk_state->operands[0],
+						     walk_state);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+
+			/*
+			 * Get the return value and save as the last result
+			 * value.  This is the only place where walk_state->return_desc
+			 * is set to anything other than zero!
+			 */
+			walk_state->return_desc = walk_state->operands[0];
+		} else if (walk_state->result_count) {
+
+			/* Since we have a real Return(), delete any implicit return */
+
+			acpi_ds_clear_implicit_return(walk_state);
+
+			/*
+			 * The return value has come from a previous calculation.
+			 *
+			 * If value being returned is a Reference (such as
+			 * an arg or local), resolve it now because it may
+			 * cease to exist at the end of the method.
+			 *
+			 * Allow references created by the Index operator to return
+			 * unchanged.
+			 */
+			if ((ACPI_GET_DESCRIPTOR_TYPE
+			     (walk_state->results->results.obj_desc[0]) ==
+			     ACPI_DESC_TYPE_OPERAND)
+			    && ((walk_state->results->results.obj_desc[0])->
+				common.type == ACPI_TYPE_LOCAL_REFERENCE)
+			    && ((walk_state->results->results.obj_desc[0])->
+				reference.class != ACPI_REFCLASS_INDEX)) {
+				status =
+				    acpi_ex_resolve_to_value(&walk_state->
+							     results->results.
+							     obj_desc[0],
+							     walk_state);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+			}
+
+			walk_state->return_desc =
+			    walk_state->results->results.obj_desc[0];
+		} else {
+			/* No return operand */
+
+			if (walk_state->num_operands) {
+				acpi_ut_remove_reference(walk_state->
+							 operands[0]);
+			}
+
+			walk_state->operands[0] = NULL;
+			walk_state->num_operands = 0;
+			walk_state->return_desc = NULL;
+		}
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "Completed RETURN_OP State=%p, RetVal=%p\n",
+				  walk_state, walk_state->return_desc));
+
+		/* End the control method execution right now */
+
+		status = AE_CTRL_TERMINATE;
+		break;
+
+	case AML_NOOP_OP:
+
+		/* Just do nothing! */
+		break;
+
+	case AML_BREAK_POINT_OP:
+
+		/*
+		 * Set the single-step flag. This will cause the debugger (if present)
+		 * to break to the console within the AML debugger at the start of the
+		 * next AML instruction.
+		 */
+		ACPI_DEBUGGER_EXEC(acpi_gbl_cm_single_step = TRUE);
+		ACPI_DEBUGGER_EXEC(acpi_os_printf
+				   ("**break** Executed AML BreakPoint opcode\n"));
+
+		/* Call to the OSL in case OS wants a piece of the action */
+
+		status = acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
+					"Executed AML Breakpoint opcode");
+		break;
+
+	case AML_BREAK_OP:
+	case AML_CONTINUE_OP:	/* ACPI 2.0 */
+
+		/* Pop and delete control states until we find a while */
+
+		while (walk_state->control_state &&
+		       (walk_state->control_state->control.opcode !=
+			AML_WHILE_OP)) {
+			control_state =
+			    acpi_ut_pop_generic_state(&walk_state->
+						      control_state);
+			acpi_ut_delete_generic_state(control_state);
+		}
+
+		/* No while found? */
+
+		if (!walk_state->control_state) {
+			return (AE_AML_NO_WHILE);
+		}
+
+		/* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */
+
+		walk_state->aml_last_while =
+		    walk_state->control_state->control.package_end;
+
+		/* Return status depending on opcode */
+
+		if (op->common.aml_opcode == AML_BREAK_OP) {
+			status = AE_CTRL_BREAK;
+		} else {
+			status = AE_CTRL_CONTINUE;
+		}
+		break;
+
+	default:
+
+		ACPI_ERROR((AE_INFO, "Unknown control opcode=0x%X Op=%p",
+			    op->common.aml_opcode, op));
+
+		status = AE_AML_BAD_OPCODE;
+		break;
+	}
+
+	return (status);
+}
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index bbecf29..c627a28 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -1,7 +1,6 @@
 /******************************************************************************
  *
- * Module Name: dsopcode - Dispatcher Op Region support and handling of
- *                         "control" opcodes
+ * Module Name: dsopcode - Dispatcher suport for regions and fields
  *
  *****************************************************************************/
 
@@ -57,11 +56,6 @@
 
 /* Local prototypes */
 static acpi_status
-acpi_ds_execute_arguments(struct acpi_namespace_node *node,
-			  struct acpi_namespace_node *scope_node,
-			  u32 aml_length, u8 * aml_start);
-
-static acpi_status
 acpi_ds_init_buffer_field(u16 aml_opcode,
 			  union acpi_operand_object *obj_desc,
 			  union acpi_operand_object *buffer_desc,
@@ -71,361 +65,6 @@
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ds_execute_arguments
- *
- * PARAMETERS:  Node                - Object NS node
- *              scope_node          - Parent NS node
- *              aml_length          - Length of executable AML
- *              aml_start           - Pointer to the AML
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Late (deferred) execution of region or field arguments
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ds_execute_arguments(struct acpi_namespace_node *node,
-			  struct acpi_namespace_node *scope_node,
-			  u32 aml_length, u8 * aml_start)
-{
-	acpi_status status;
-	union acpi_parse_object *op;
-	struct acpi_walk_state *walk_state;
-
-	ACPI_FUNCTION_TRACE(ds_execute_arguments);
-
-	/*
-	 * Allocate a new parser op to be the root of the parsed tree
-	 */
-	op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
-	if (!op) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	/* Save the Node for use in acpi_ps_parse_aml */
-
-	op->common.node = scope_node;
-
-	/* Create and initialize a new parser state */
-
-	walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
-	if (!walk_state) {
-		status = AE_NO_MEMORY;
-		goto cleanup;
-	}
-
-	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
-				       aml_length, NULL, ACPI_IMODE_LOAD_PASS1);
-	if (ACPI_FAILURE(status)) {
-		acpi_ds_delete_walk_state(walk_state);
-		goto cleanup;
-	}
-
-	/* Mark this parse as a deferred opcode */
-
-	walk_state->parse_flags = ACPI_PARSE_DEFERRED_OP;
-	walk_state->deferred_node = node;
-
-	/* Pass1: Parse the entire declaration */
-
-	status = acpi_ps_parse_aml(walk_state);
-	if (ACPI_FAILURE(status)) {
-		goto cleanup;
-	}
-
-	/* Get and init the Op created above */
-
-	op->common.node = node;
-	acpi_ps_delete_parse_tree(op);
-
-	/* Evaluate the deferred arguments */
-
-	op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
-	if (!op) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	op->common.node = scope_node;
-
-	/* Create and initialize a new parser state */
-
-	walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
-	if (!walk_state) {
-		status = AE_NO_MEMORY;
-		goto cleanup;
-	}
-
-	/* Execute the opcode and arguments */
-
-	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
-				       aml_length, NULL, ACPI_IMODE_EXECUTE);
-	if (ACPI_FAILURE(status)) {
-		acpi_ds_delete_walk_state(walk_state);
-		goto cleanup;
-	}
-
-	/* Mark this execution as a deferred opcode */
-
-	walk_state->deferred_node = node;
-	status = acpi_ps_parse_aml(walk_state);
-
-      cleanup:
-	acpi_ps_delete_parse_tree(op);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_get_buffer_field_arguments
- *
- * PARAMETERS:  obj_desc        - A valid buffer_field object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get buffer_field Buffer and Index. This implements the late
- *              evaluation of these field attributes.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc)
-{
-	union acpi_operand_object *extra_desc;
-	struct acpi_namespace_node *node;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_field_arguments, obj_desc);
-
-	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Get the AML pointer (method object) and buffer_field node */
-
-	extra_desc = acpi_ns_get_secondary_object(obj_desc);
-	node = obj_desc->buffer_field.node;
-
-	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
-			(ACPI_TYPE_BUFFER_FIELD, node, NULL));
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n",
-			  acpi_ut_get_node_name(node)));
-
-	/* Execute the AML code for the term_arg arguments */
-
-	status = acpi_ds_execute_arguments(node, node->parent,
-					   extra_desc->extra.aml_length,
-					   extra_desc->extra.aml_start);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_get_bank_field_arguments
- *
- * PARAMETERS:  obj_desc        - A valid bank_field object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get bank_field bank_value. This implements the late
- *              evaluation of these field attributes.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_get_bank_field_arguments(union acpi_operand_object *obj_desc)
-{
-	union acpi_operand_object *extra_desc;
-	struct acpi_namespace_node *node;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_bank_field_arguments, obj_desc);
-
-	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Get the AML pointer (method object) and bank_field node */
-
-	extra_desc = acpi_ns_get_secondary_object(obj_desc);
-	node = obj_desc->bank_field.node;
-
-	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
-			(ACPI_TYPE_LOCAL_BANK_FIELD, node, NULL));
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BankField Arg Init\n",
-			  acpi_ut_get_node_name(node)));
-
-	/* Execute the AML code for the term_arg arguments */
-
-	status = acpi_ds_execute_arguments(node, node->parent,
-					   extra_desc->extra.aml_length,
-					   extra_desc->extra.aml_start);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_get_buffer_arguments
- *
- * PARAMETERS:  obj_desc        - A valid Buffer object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get Buffer length and initializer byte list.  This implements
- *              the late evaluation of these attributes.
- *
- ******************************************************************************/
-
-acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc)
-{
-	struct acpi_namespace_node *node;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_arguments, obj_desc);
-
-	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Get the Buffer node */
-
-	node = obj_desc->buffer.node;
-	if (!node) {
-		ACPI_ERROR((AE_INFO,
-			    "No pointer back to namespace node in buffer object %p",
-			    obj_desc));
-		return_ACPI_STATUS(AE_AML_INTERNAL);
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Buffer Arg Init\n"));
-
-	/* Execute the AML code for the term_arg arguments */
-
-	status = acpi_ds_execute_arguments(node, node,
-					   obj_desc->buffer.aml_length,
-					   obj_desc->buffer.aml_start);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_get_package_arguments
- *
- * PARAMETERS:  obj_desc        - A valid Package object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get Package length and initializer byte list.  This implements
- *              the late evaluation of these attributes.
- *
- ******************************************************************************/
-
-acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc)
-{
-	struct acpi_namespace_node *node;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_package_arguments, obj_desc);
-
-	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Get the Package node */
-
-	node = obj_desc->package.node;
-	if (!node) {
-		ACPI_ERROR((AE_INFO,
-			    "No pointer back to namespace node in package %p",
-			    obj_desc));
-		return_ACPI_STATUS(AE_AML_INTERNAL);
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Package Arg Init\n"));
-
-	/* Execute the AML code for the term_arg arguments */
-
-	status = acpi_ds_execute_arguments(node, node,
-					   obj_desc->package.aml_length,
-					   obj_desc->package.aml_start);
-	return_ACPI_STATUS(status);
-}
-
-/*****************************************************************************
- *
- * FUNCTION:    acpi_ds_get_region_arguments
- *
- * PARAMETERS:  obj_desc        - A valid region object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get region address and length.  This implements the late
- *              evaluation of these region attributes.
- *
- ****************************************************************************/
-
-acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
-{
-	struct acpi_namespace_node *node;
-	acpi_status status;
-	union acpi_operand_object *extra_desc;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_region_arguments, obj_desc);
-
-	if (obj_desc->region.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	extra_desc = acpi_ns_get_secondary_object(obj_desc);
-	if (!extra_desc) {
-		return_ACPI_STATUS(AE_NOT_EXIST);
-	}
-
-	/* Get the Region node */
-
-	node = obj_desc->region.node;
-
-	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
-			(ACPI_TYPE_REGION, node, NULL));
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n",
-			  acpi_ut_get_node_name(node),
-			  extra_desc->extra.aml_start));
-
-	/* Execute the argument AML */
-
-	status = acpi_ds_execute_arguments(node, node->parent,
-					   extra_desc->extra.aml_length,
-					   extra_desc->extra.aml_start);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Validate the region address/length via the host OS */
-
-	status = acpi_os_validate_address(obj_desc->region.space_id,
-					  obj_desc->region.address,
-					  (acpi_size) obj_desc->region.length,
-					  acpi_ut_get_node_name(node));
-
-	if (ACPI_FAILURE(status)) {
-		/*
-		 * Invalid address/length. We will emit an error message and mark
-		 * the region as invalid, so that it will cause an additional error if
-		 * it is ever used. Then return AE_OK.
-		 */
-		ACPI_EXCEPTION((AE_INFO, status,
-				"During address validation of OpRegion [%4.4s]",
-				node->name.ascii));
-		obj_desc->common.flags |= AOPOBJ_INVALID;
-		status = AE_OK;
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
  * FUNCTION:    acpi_ds_initialize_region
  *
  * PARAMETERS:  obj_handle      - Region namespace node
@@ -826,8 +465,9 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Get region address and length
- *              Called from acpi_ds_exec_end_op during data_table_region parse tree walk
+ * DESCRIPTION: Get region address and length.
+ *              Called from acpi_ds_exec_end_op during data_table_region parse
+ *              tree walk.
  *
  ******************************************************************************/
 
@@ -1114,360 +754,3 @@
 	acpi_ut_remove_reference(operand_desc);
 	return_ACPI_STATUS(status);
 }
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_exec_begin_control_op
- *
- * PARAMETERS:  walk_list       - The list that owns the walk stack
- *              Op              - The control Op
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Handles all control ops encountered during control method
- *              execution.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
-			      union acpi_parse_object *op)
-{
-	acpi_status status = AE_OK;
-	union acpi_generic_state *control_state;
-
-	ACPI_FUNCTION_NAME(ds_exec_begin_control_op);
-
-	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", op,
-			  op->common.aml_opcode, walk_state));
-
-	switch (op->common.aml_opcode) {
-	case AML_WHILE_OP:
-
-		/*
-		 * If this is an additional iteration of a while loop, continue.
-		 * There is no need to allocate a new control state.
-		 */
-		if (walk_state->control_state) {
-			if (walk_state->control_state->control.aml_predicate_start
-				== (walk_state->parser_state.aml - 1)) {
-
-				/* Reset the state to start-of-loop */
-
-				walk_state->control_state->common.state =
-				    ACPI_CONTROL_CONDITIONAL_EXECUTING;
-				break;
-			}
-		}
-
-		/*lint -fallthrough */
-
-	case AML_IF_OP:
-
-		/*
-		 * IF/WHILE: Create a new control state to manage these
-		 * constructs. We need to manage these as a stack, in order
-		 * to handle nesting.
-		 */
-		control_state = acpi_ut_create_control_state();
-		if (!control_state) {
-			status = AE_NO_MEMORY;
-			break;
-		}
-		/*
-		 * Save a pointer to the predicate for multiple executions
-		 * of a loop
-		 */
-		control_state->control.aml_predicate_start =
-		    walk_state->parser_state.aml - 1;
-		control_state->control.package_end =
-		    walk_state->parser_state.pkg_end;
-		control_state->control.opcode = op->common.aml_opcode;
-
-		/* Push the control state on this walk's control stack */
-
-		acpi_ut_push_generic_state(&walk_state->control_state,
-					   control_state);
-		break;
-
-	case AML_ELSE_OP:
-
-		/* Predicate is in the state object */
-		/* If predicate is true, the IF was executed, ignore ELSE part */
-
-		if (walk_state->last_predicate) {
-			status = AE_CTRL_TRUE;
-		}
-
-		break;
-
-	case AML_RETURN_OP:
-
-		break;
-
-	default:
-		break;
-	}
-
-	return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_exec_end_control_op
- *
- * PARAMETERS:  walk_list       - The list that owns the walk stack
- *              Op              - The control Op
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Handles all control ops encountered during control method
- *              execution.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
-			    union acpi_parse_object * op)
-{
-	acpi_status status = AE_OK;
-	union acpi_generic_state *control_state;
-
-	ACPI_FUNCTION_NAME(ds_exec_end_control_op);
-
-	switch (op->common.aml_opcode) {
-	case AML_IF_OP:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op));
-
-		/*
-		 * Save the result of the predicate in case there is an
-		 * ELSE to come
-		 */
-		walk_state->last_predicate =
-		    (u8) walk_state->control_state->common.value;
-
-		/*
-		 * Pop the control state that was created at the start
-		 * of the IF and free it
-		 */
-		control_state =
-		    acpi_ut_pop_generic_state(&walk_state->control_state);
-		acpi_ut_delete_generic_state(control_state);
-		break;
-
-	case AML_ELSE_OP:
-
-		break;
-
-	case AML_WHILE_OP:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op));
-
-		control_state = walk_state->control_state;
-		if (control_state->common.value) {
-
-			/* Predicate was true, the body of the loop was just executed */
-
-			/*
-			 * This loop counter mechanism allows the interpreter to escape
-			 * possibly infinite loops. This can occur in poorly written AML
-			 * when the hardware does not respond within a while loop and the
-			 * loop does not implement a timeout.
-			 */
-			control_state->control.loop_count++;
-			if (control_state->control.loop_count >
-				ACPI_MAX_LOOP_ITERATIONS) {
-				status = AE_AML_INFINITE_LOOP;
-				break;
-			}
-
-			/*
-			 * Go back and evaluate the predicate and maybe execute the loop
-			 * another time
-			 */
-			status = AE_CTRL_PENDING;
-			walk_state->aml_last_while =
-			    control_state->control.aml_predicate_start;
-			break;
-		}
-
-		/* Predicate was false, terminate this while loop */
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "[WHILE_OP] termination! Op=%p\n", op));
-
-		/* Pop this control state and free it */
-
-		control_state =
-		    acpi_ut_pop_generic_state(&walk_state->control_state);
-		acpi_ut_delete_generic_state(control_state);
-		break;
-
-	case AML_RETURN_OP:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "[RETURN_OP] Op=%p Arg=%p\n", op,
-				  op->common.value.arg));
-
-		/*
-		 * One optional operand -- the return value
-		 * It can be either an immediate operand or a result that
-		 * has been bubbled up the tree
-		 */
-		if (op->common.value.arg) {
-
-			/* Since we have a real Return(), delete any implicit return */
-
-			acpi_ds_clear_implicit_return(walk_state);
-
-			/* Return statement has an immediate operand */
-
-			status =
-			    acpi_ds_create_operands(walk_state,
-						    op->common.value.arg);
-			if (ACPI_FAILURE(status)) {
-				return (status);
-			}
-
-			/*
-			 * If value being returned is a Reference (such as
-			 * an arg or local), resolve it now because it may
-			 * cease to exist at the end of the method.
-			 */
-			status =
-			    acpi_ex_resolve_to_value(&walk_state->operands[0],
-						     walk_state);
-			if (ACPI_FAILURE(status)) {
-				return (status);
-			}
-
-			/*
-			 * Get the return value and save as the last result
-			 * value.  This is the only place where walk_state->return_desc
-			 * is set to anything other than zero!
-			 */
-			walk_state->return_desc = walk_state->operands[0];
-		} else if (walk_state->result_count) {
-
-			/* Since we have a real Return(), delete any implicit return */
-
-			acpi_ds_clear_implicit_return(walk_state);
-
-			/*
-			 * The return value has come from a previous calculation.
-			 *
-			 * If value being returned is a Reference (such as
-			 * an arg or local), resolve it now because it may
-			 * cease to exist at the end of the method.
-			 *
-			 * Allow references created by the Index operator to return unchanged.
-			 */
-			if ((ACPI_GET_DESCRIPTOR_TYPE
-			     (walk_state->results->results.obj_desc[0]) ==
-			     ACPI_DESC_TYPE_OPERAND)
-			    && ((walk_state->results->results.obj_desc[0])->
-				common.type == ACPI_TYPE_LOCAL_REFERENCE)
-			    && ((walk_state->results->results.obj_desc[0])->
-				reference.class != ACPI_REFCLASS_INDEX)) {
-				status =
-				    acpi_ex_resolve_to_value(&walk_state->
-							     results->results.
-							     obj_desc[0],
-							     walk_state);
-				if (ACPI_FAILURE(status)) {
-					return (status);
-				}
-			}
-
-			walk_state->return_desc =
-			    walk_state->results->results.obj_desc[0];
-		} else {
-			/* No return operand */
-
-			if (walk_state->num_operands) {
-				acpi_ut_remove_reference(walk_state->
-							 operands[0]);
-			}
-
-			walk_state->operands[0] = NULL;
-			walk_state->num_operands = 0;
-			walk_state->return_desc = NULL;
-		}
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "Completed RETURN_OP State=%p, RetVal=%p\n",
-				  walk_state, walk_state->return_desc));
-
-		/* End the control method execution right now */
-
-		status = AE_CTRL_TERMINATE;
-		break;
-
-	case AML_NOOP_OP:
-
-		/* Just do nothing! */
-		break;
-
-	case AML_BREAK_POINT_OP:
-
-		/*
-		 * Set the single-step flag. This will cause the debugger (if present)
-		 * to break to the console within the AML debugger at the start of the
-		 * next AML instruction.
-		 */
-		ACPI_DEBUGGER_EXEC(acpi_gbl_cm_single_step = TRUE);
-		ACPI_DEBUGGER_EXEC(acpi_os_printf
-				   ("**break** Executed AML BreakPoint opcode\n"));
-
-		/* Call to the OSL in case OS wants a piece of the action */
-
-		status = acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
-					"Executed AML Breakpoint opcode");
-		break;
-
-	case AML_BREAK_OP:
-	case AML_CONTINUE_OP:	/* ACPI 2.0 */
-
-		/* Pop and delete control states until we find a while */
-
-		while (walk_state->control_state &&
-		       (walk_state->control_state->control.opcode !=
-			AML_WHILE_OP)) {
-			control_state =
-			    acpi_ut_pop_generic_state(&walk_state->
-						      control_state);
-			acpi_ut_delete_generic_state(control_state);
-		}
-
-		/* No while found? */
-
-		if (!walk_state->control_state) {
-			return (AE_AML_NO_WHILE);
-		}
-
-		/* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */
-
-		walk_state->aml_last_while =
-		    walk_state->control_state->control.package_end;
-
-		/* Return status depending on opcode */
-
-		if (op->common.aml_opcode == AML_BREAK_OP) {
-			status = AE_CTRL_BREAK;
-		} else {
-			status = AE_CTRL_CONTINUE;
-		}
-		break;
-
-	default:
-
-		ACPI_ERROR((AE_INFO, "Unknown control opcode=0x%X Op=%p",
-			    op->common.aml_opcode, op));
-
-		status = AE_AML_BAD_OPCODE;
-		break;
-	}
-
-	return (status);
-}
diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c
index 52566ff..23a3b1a 100644
--- a/drivers/acpi/acpica/dswload.c
+++ b/drivers/acpi/acpica/dswload.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Module Name: dswload - Dispatcher namespace load callbacks
+ * Module Name: dswload - Dispatcher first pass namespace load callbacks
  *
  *****************************************************************************/
 
@@ -48,7 +48,6 @@
 #include "acdispat.h"
 #include "acinterp.h"
 #include "acnamesp.h"
-#include "acevents.h"
 
 #ifdef ACPI_ASL_COMPILER
 #include <acpi/acdisasm.h>
@@ -537,670 +536,3 @@
 
 	return_ACPI_STATUS(status);
 }
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_load2_begin_op
- *
- * PARAMETERS:  walk_state      - Current state of the parse tree walk
- *              out_op          - Wher to return op if a new one is created
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Descending callback used during the loading of ACPI tables.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
-		       union acpi_parse_object **out_op)
-{
-	union acpi_parse_object *op;
-	struct acpi_namespace_node *node;
-	acpi_status status;
-	acpi_object_type object_type;
-	char *buffer_ptr;
-	u32 flags;
-
-	ACPI_FUNCTION_TRACE(ds_load2_begin_op);
-
-	op = walk_state->op;
-	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
-			  walk_state));
-
-	if (op) {
-		if ((walk_state->control_state) &&
-		    (walk_state->control_state->common.state ==
-		     ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
-
-			/* We are executing a while loop outside of a method */
-
-			status = acpi_ds_exec_begin_op(walk_state, out_op);
-			return_ACPI_STATUS(status);
-		}
-
-		/* We only care about Namespace opcodes here */
-
-		if ((!(walk_state->op_info->flags & AML_NSOPCODE) &&
-		     (walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
-		    (!(walk_state->op_info->flags & AML_NAMED))) {
-			return_ACPI_STATUS(AE_OK);
-		}
-
-		/* Get the name we are going to enter or lookup in the namespace */
-
-		if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
-
-			/* For Namepath op, get the path string */
-
-			buffer_ptr = op->common.value.string;
-			if (!buffer_ptr) {
-
-				/* No name, just exit */
-
-				return_ACPI_STATUS(AE_OK);
-			}
-		} else {
-			/* Get name from the op */
-
-			buffer_ptr = ACPI_CAST_PTR(char, &op->named.name);
-		}
-	} else {
-		/* Get the namestring from the raw AML */
-
-		buffer_ptr =
-		    acpi_ps_get_next_namestring(&walk_state->parser_state);
-	}
-
-	/* Map the opcode into an internal object type */
-
-	object_type = walk_state->op_info->object_type;
-
-	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-			  "State=%p Op=%p Type=%X\n", walk_state, op,
-			  object_type));
-
-	switch (walk_state->opcode) {
-	case AML_FIELD_OP:
-	case AML_BANK_FIELD_OP:
-	case AML_INDEX_FIELD_OP:
-
-		node = NULL;
-		status = AE_OK;
-		break;
-
-	case AML_INT_NAMEPATH_OP:
-		/*
-		 * The name_path is an object reference to an existing object.
-		 * Don't enter the name into the namespace, but look it up
-		 * for use later.
-		 */
-		status =
-		    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
-				   object_type, ACPI_IMODE_EXECUTE,
-				   ACPI_NS_SEARCH_PARENT, walk_state, &(node));
-		break;
-
-	case AML_SCOPE_OP:
-
-		/* Special case for Scope(\) -> refers to the Root node */
-
-		if (op && (op->named.node == acpi_gbl_root_node)) {
-			node = op->named.node;
-
-			status =
-			    acpi_ds_scope_stack_push(node, object_type,
-						     walk_state);
-			if (ACPI_FAILURE(status)) {
-				return_ACPI_STATUS(status);
-			}
-		} else {
-			/*
-			 * The Path is an object reference to an existing object.
-			 * Don't enter the name into the namespace, but look it up
-			 * for use later.
-			 */
-			status =
-			    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
-					   object_type, ACPI_IMODE_EXECUTE,
-					   ACPI_NS_SEARCH_PARENT, walk_state,
-					   &(node));
-			if (ACPI_FAILURE(status)) {
-#ifdef ACPI_ASL_COMPILER
-				if (status == AE_NOT_FOUND) {
-					status = AE_OK;
-				} else {
-					ACPI_ERROR_NAMESPACE(buffer_ptr,
-							     status);
-				}
-#else
-				ACPI_ERROR_NAMESPACE(buffer_ptr, status);
-#endif
-				return_ACPI_STATUS(status);
-			}
-		}
-
-		/*
-		 * We must check to make sure that the target is
-		 * one of the opcodes that actually opens a scope
-		 */
-		switch (node->type) {
-		case ACPI_TYPE_ANY:
-		case ACPI_TYPE_LOCAL_SCOPE:	/* Scope */
-		case ACPI_TYPE_DEVICE:
-		case ACPI_TYPE_POWER:
-		case ACPI_TYPE_PROCESSOR:
-		case ACPI_TYPE_THERMAL:
-
-			/* These are acceptable types */
-			break;
-
-		case ACPI_TYPE_INTEGER:
-		case ACPI_TYPE_STRING:
-		case ACPI_TYPE_BUFFER:
-
-			/*
-			 * These types we will allow, but we will change the type.
-			 * This enables some existing code of the form:
-			 *
-			 *  Name (DEB, 0)
-			 *  Scope (DEB) { ... }
-			 */
-			ACPI_WARNING((AE_INFO,
-				      "Type override - [%4.4s] had invalid type (%s) "
-				      "for Scope operator, changed to type ANY\n",
-				      acpi_ut_get_node_name(node),
-				      acpi_ut_get_type_name(node->type)));
-
-			node->type = ACPI_TYPE_ANY;
-			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
-			break;
-
-		default:
-
-			/* All other types are an error */
-
-			ACPI_ERROR((AE_INFO,
-				    "Invalid type (%s) for target of "
-				    "Scope operator [%4.4s] (Cannot override)",
-				    acpi_ut_get_type_name(node->type),
-				    acpi_ut_get_node_name(node)));
-
-			return (AE_AML_OPERAND_TYPE);
-		}
-		break;
-
-	default:
-
-		/* All other opcodes */
-
-		if (op && op->common.node) {
-
-			/* This op/node was previously entered into the namespace */
-
-			node = op->common.node;
-
-			if (acpi_ns_opens_scope(object_type)) {
-				status =
-				    acpi_ds_scope_stack_push(node, object_type,
-							     walk_state);
-				if (ACPI_FAILURE(status)) {
-					return_ACPI_STATUS(status);
-				}
-			}
-
-			return_ACPI_STATUS(AE_OK);
-		}
-
-		/*
-		 * Enter the named type into the internal namespace. We enter the name
-		 * as we go downward in the parse tree. Any necessary subobjects that
-		 * involve arguments to the opcode must be created as we go back up the
-		 * parse tree later.
-		 *
-		 * Note: Name may already exist if we are executing a deferred opcode.
-		 */
-		if (walk_state->deferred_node) {
-
-			/* This name is already in the namespace, get the node */
-
-			node = walk_state->deferred_node;
-			status = AE_OK;
-			break;
-		}
-
-		flags = ACPI_NS_NO_UPSEARCH;
-		if (walk_state->pass_number == ACPI_IMODE_EXECUTE) {
-
-			/* Execution mode, node cannot already exist, node is temporary */
-
-			flags |= ACPI_NS_ERROR_IF_FOUND;
-
-			if (!
-			    (walk_state->
-			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
-				flags |= ACPI_NS_TEMPORARY;
-			}
-		}
-
-		/* Add new entry or lookup existing entry */
-
-		status =
-		    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
-				   object_type, ACPI_IMODE_LOAD_PASS2, flags,
-				   walk_state, &node);
-
-		if (ACPI_SUCCESS(status) && (flags & ACPI_NS_TEMPORARY)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-					  "***New Node [%4.4s] %p is temporary\n",
-					  acpi_ut_get_node_name(node), node));
-		}
-		break;
-	}
-
-	if (ACPI_FAILURE(status)) {
-		ACPI_ERROR_NAMESPACE(buffer_ptr, status);
-		return_ACPI_STATUS(status);
-	}
-
-	if (!op) {
-
-		/* Create a new op */
-
-		op = acpi_ps_alloc_op(walk_state->opcode);
-		if (!op) {
-			return_ACPI_STATUS(AE_NO_MEMORY);
-		}
-
-		/* Initialize the new op */
-
-		if (node) {
-			op->named.name = node->name.integer;
-		}
-		*out_op = op;
-	}
-
-	/*
-	 * Put the Node in the "op" object that the parser uses, so we
-	 * can get it again quickly when this scope is closed
-	 */
-	op->common.node = node;
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_load2_end_op
- *
- * PARAMETERS:  walk_state      - Current state of the parse tree walk
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Ascending callback used during the loading of the namespace,
- *              both control methods and everything else.
- *
- ******************************************************************************/
-
-acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
-{
-	union acpi_parse_object *op;
-	acpi_status status = AE_OK;
-	acpi_object_type object_type;
-	struct acpi_namespace_node *node;
-	union acpi_parse_object *arg;
-	struct acpi_namespace_node *new_node;
-#ifndef ACPI_NO_METHOD_EXECUTION
-	u32 i;
-	u8 region_space;
-#endif
-
-	ACPI_FUNCTION_TRACE(ds_load2_end_op);
-
-	op = walk_state->op;
-	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
-			  walk_state->op_info->name, op, walk_state));
-
-	/* Check if opcode had an associated namespace object */
-
-	if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	if (op->common.aml_opcode == AML_SCOPE_OP) {
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "Ending scope Op=%p State=%p\n", op,
-				  walk_state));
-	}
-
-	object_type = walk_state->op_info->object_type;
-
-	/*
-	 * Get the Node/name from the earlier lookup
-	 * (It was saved in the *op structure)
-	 */
-	node = op->common.node;
-
-	/*
-	 * Put the Node on the object stack (Contains the ACPI Name of
-	 * this object)
-	 */
-	walk_state->operands[0] = (void *)node;
-	walk_state->num_operands = 1;
-
-	/* Pop the scope stack */
-
-	if (acpi_ns_opens_scope(object_type) &&
-	    (op->common.aml_opcode != AML_INT_METHODCALL_OP)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "(%s) Popping scope for Op %p\n",
-				  acpi_ut_get_type_name(object_type), op));
-
-		status = acpi_ds_scope_stack_pop(walk_state);
-		if (ACPI_FAILURE(status)) {
-			goto cleanup;
-		}
-	}
-
-	/*
-	 * Named operations are as follows:
-	 *
-	 * AML_ALIAS
-	 * AML_BANKFIELD
-	 * AML_CREATEBITFIELD
-	 * AML_CREATEBYTEFIELD
-	 * AML_CREATEDWORDFIELD
-	 * AML_CREATEFIELD
-	 * AML_CREATEQWORDFIELD
-	 * AML_CREATEWORDFIELD
-	 * AML_DATA_REGION
-	 * AML_DEVICE
-	 * AML_EVENT
-	 * AML_FIELD
-	 * AML_INDEXFIELD
-	 * AML_METHOD
-	 * AML_METHODCALL
-	 * AML_MUTEX
-	 * AML_NAME
-	 * AML_NAMEDFIELD
-	 * AML_OPREGION
-	 * AML_POWERRES
-	 * AML_PROCESSOR
-	 * AML_SCOPE
-	 * AML_THERMALZONE
-	 */
-
-	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-			  "Create-Load [%s] State=%p Op=%p NamedObj=%p\n",
-			  acpi_ps_get_opcode_name(op->common.aml_opcode),
-			  walk_state, op, node));
-
-	/* Decode the opcode */
-
-	arg = op->common.value.arg;
-
-	switch (walk_state->op_info->type) {
-#ifndef ACPI_NO_METHOD_EXECUTION
-
-	case AML_TYPE_CREATE_FIELD:
-		/*
-		 * Create the field object, but the field buffer and index must
-		 * be evaluated later during the execution phase
-		 */
-		status = acpi_ds_create_buffer_field(op, walk_state);
-		break;
-
-	case AML_TYPE_NAMED_FIELD:
-		/*
-		 * If we are executing a method, initialize the field
-		 */
-		if (walk_state->method_node) {
-			status = acpi_ds_init_field_objects(op, walk_state);
-		}
-
-		switch (op->common.aml_opcode) {
-		case AML_INDEX_FIELD_OP:
-
-			status =
-			    acpi_ds_create_index_field(op,
-						       (acpi_handle) arg->
-						       common.node, walk_state);
-			break;
-
-		case AML_BANK_FIELD_OP:
-
-			status =
-			    acpi_ds_create_bank_field(op, arg->common.node,
-						      walk_state);
-			break;
-
-		case AML_FIELD_OP:
-
-			status =
-			    acpi_ds_create_field(op, arg->common.node,
-						 walk_state);
-			break;
-
-		default:
-			/* All NAMED_FIELD opcodes must be handled above */
-			break;
-		}
-		break;
-
-	case AML_TYPE_NAMED_SIMPLE:
-
-		status = acpi_ds_create_operands(walk_state, arg);
-		if (ACPI_FAILURE(status)) {
-			goto cleanup;
-		}
-
-		switch (op->common.aml_opcode) {
-		case AML_PROCESSOR_OP:
-
-			status = acpi_ex_create_processor(walk_state);
-			break;
-
-		case AML_POWER_RES_OP:
-
-			status = acpi_ex_create_power_resource(walk_state);
-			break;
-
-		case AML_MUTEX_OP:
-
-			status = acpi_ex_create_mutex(walk_state);
-			break;
-
-		case AML_EVENT_OP:
-
-			status = acpi_ex_create_event(walk_state);
-			break;
-
-		case AML_ALIAS_OP:
-
-			status = acpi_ex_create_alias(walk_state);
-			break;
-
-		default:
-			/* Unknown opcode */
-
-			status = AE_OK;
-			goto cleanup;
-		}
-
-		/* Delete operands */
-
-		for (i = 1; i < walk_state->num_operands; i++) {
-			acpi_ut_remove_reference(walk_state->operands[i]);
-			walk_state->operands[i] = NULL;
-		}
-
-		break;
-#endif				/* ACPI_NO_METHOD_EXECUTION */
-
-	case AML_TYPE_NAMED_COMPLEX:
-
-		switch (op->common.aml_opcode) {
-#ifndef ACPI_NO_METHOD_EXECUTION
-		case AML_REGION_OP:
-		case AML_DATA_REGION_OP:
-
-			if (op->common.aml_opcode == AML_REGION_OP) {
-				region_space = (acpi_adr_space_type)
-				    ((op->common.value.arg)->common.value.
-				     integer);
-			} else {
-				region_space = REGION_DATA_TABLE;
-			}
-
-			/*
-			 * The op_region is not fully parsed at this time. The only valid
-			 * argument is the space_id. (We must save the address of the
-			 * AML of the address and length operands)
-			 *
-			 * If we have a valid region, initialize it. The namespace is
-			 * unlocked at this point.
-			 *
-			 * Need to unlock interpreter if it is locked (if we are running
-			 * a control method), in order to allow _REG methods to be run
-			 * during acpi_ev_initialize_region.
-			 */
-			if (walk_state->method_node) {
-				/*
-				 * Executing a method: initialize the region and unlock
-				 * the interpreter
-				 */
-				status =
-				    acpi_ex_create_region(op->named.data,
-							  op->named.length,
-							  region_space,
-							  walk_state);
-				if (ACPI_FAILURE(status)) {
-					return (status);
-				}
-
-				acpi_ex_exit_interpreter();
-			}
-
-			status =
-			    acpi_ev_initialize_region
-			    (acpi_ns_get_attached_object(node), FALSE);
-			if (walk_state->method_node) {
-				acpi_ex_enter_interpreter();
-			}
-
-			if (ACPI_FAILURE(status)) {
-				/*
-				 *  If AE_NOT_EXIST is returned, it is not fatal
-				 *  because many regions get created before a handler
-				 *  is installed for said region.
-				 */
-				if (AE_NOT_EXIST == status) {
-					status = AE_OK;
-				}
-			}
-			break;
-
-		case AML_NAME_OP:
-
-			status = acpi_ds_create_node(walk_state, node, op);
-			break;
-
-		case AML_METHOD_OP:
-			/*
-			 * method_op pkg_length name_string method_flags term_list
-			 *
-			 * Note: We must create the method node/object pair as soon as we
-			 * see the method declaration. This allows later pass1 parsing
-			 * of invocations of the method (need to know the number of
-			 * arguments.)
-			 */
-			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-					  "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
-					  walk_state, op, op->named.node));
-
-			if (!acpi_ns_get_attached_object(op->named.node)) {
-				walk_state->operands[0] =
-				    ACPI_CAST_PTR(void, op->named.node);
-				walk_state->num_operands = 1;
-
-				status =
-				    acpi_ds_create_operands(walk_state,
-							    op->common.value.
-							    arg);
-				if (ACPI_SUCCESS(status)) {
-					status =
-					    acpi_ex_create_method(op->named.
-								  data,
-								  op->named.
-								  length,
-								  walk_state);
-				}
-				walk_state->operands[0] = NULL;
-				walk_state->num_operands = 0;
-
-				if (ACPI_FAILURE(status)) {
-					return_ACPI_STATUS(status);
-				}
-			}
-			break;
-
-#endif				/* ACPI_NO_METHOD_EXECUTION */
-
-		default:
-			/* All NAMED_COMPLEX opcodes must be handled above */
-			break;
-		}
-		break;
-
-	case AML_CLASS_INTERNAL:
-
-		/* case AML_INT_NAMEPATH_OP: */
-		break;
-
-	case AML_CLASS_METHOD_CALL:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "RESOLVING-MethodCall: State=%p Op=%p NamedObj=%p\n",
-				  walk_state, op, node));
-
-		/*
-		 * Lookup the method name and save the Node
-		 */
-		status =
-		    acpi_ns_lookup(walk_state->scope_info,
-				   arg->common.value.string, ACPI_TYPE_ANY,
-				   ACPI_IMODE_LOAD_PASS2,
-				   ACPI_NS_SEARCH_PARENT |
-				   ACPI_NS_DONT_OPEN_SCOPE, walk_state,
-				   &(new_node));
-		if (ACPI_SUCCESS(status)) {
-			/*
-			 * Make sure that what we found is indeed a method
-			 * We didn't search for a method on purpose, to see if the name
-			 * would resolve
-			 */
-			if (new_node->type != ACPI_TYPE_METHOD) {
-				status = AE_AML_OPERAND_TYPE;
-			}
-
-			/* We could put the returned object (Node) on the object stack for
-			 * later, but for now, we will put it in the "op" object that the
-			 * parser uses, so we can get it again at the end of this scope
-			 */
-			op->common.node = new_node;
-		} else {
-			ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
-		}
-		break;
-
-	default:
-		break;
-	}
-
-      cleanup:
-
-	/* Remove the Node pushed at the very beginning */
-
-	walk_state->operands[0] = NULL;
-	walk_state->num_operands = 0;
-	return_ACPI_STATUS(status);
-}
diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c
new file mode 100644
index 0000000..4be4e92
--- /dev/null
+++ b/drivers/acpi/acpica/dswload2.c
@@ -0,0 +1,720 @@
+/******************************************************************************
+ *
+ * Module Name: dswload2 - Dispatcher second pass namespace load callbacks
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acparser.h"
+#include "amlcode.h"
+#include "acdispat.h"
+#include "acinterp.h"
+#include "acnamesp.h"
+#include "acevents.h"
+
+#define _COMPONENT          ACPI_DISPATCHER
+ACPI_MODULE_NAME("dswload2")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load2_begin_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              out_op          - Wher to return op if a new one is created
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Descending callback used during the loading of ACPI tables.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
+		       union acpi_parse_object **out_op)
+{
+	union acpi_parse_object *op;
+	struct acpi_namespace_node *node;
+	acpi_status status;
+	acpi_object_type object_type;
+	char *buffer_ptr;
+	u32 flags;
+
+	ACPI_FUNCTION_TRACE(ds_load2_begin_op);
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
+			  walk_state));
+
+	if (op) {
+		if ((walk_state->control_state) &&
+		    (walk_state->control_state->common.state ==
+		     ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
+
+			/* We are executing a while loop outside of a method */
+
+			status = acpi_ds_exec_begin_op(walk_state, out_op);
+			return_ACPI_STATUS(status);
+		}
+
+		/* We only care about Namespace opcodes here */
+
+		if ((!(walk_state->op_info->flags & AML_NSOPCODE) &&
+		     (walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
+		    (!(walk_state->op_info->flags & AML_NAMED))) {
+			return_ACPI_STATUS(AE_OK);
+		}
+
+		/* Get the name we are going to enter or lookup in the namespace */
+
+		if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
+
+			/* For Namepath op, get the path string */
+
+			buffer_ptr = op->common.value.string;
+			if (!buffer_ptr) {
+
+				/* No name, just exit */
+
+				return_ACPI_STATUS(AE_OK);
+			}
+		} else {
+			/* Get name from the op */
+
+			buffer_ptr = ACPI_CAST_PTR(char, &op->named.name);
+		}
+	} else {
+		/* Get the namestring from the raw AML */
+
+		buffer_ptr =
+		    acpi_ps_get_next_namestring(&walk_state->parser_state);
+	}
+
+	/* Map the opcode into an internal object type */
+
+	object_type = walk_state->op_info->object_type;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+			  "State=%p Op=%p Type=%X\n", walk_state, op,
+			  object_type));
+
+	switch (walk_state->opcode) {
+	case AML_FIELD_OP:
+	case AML_BANK_FIELD_OP:
+	case AML_INDEX_FIELD_OP:
+
+		node = NULL;
+		status = AE_OK;
+		break;
+
+	case AML_INT_NAMEPATH_OP:
+		/*
+		 * The name_path is an object reference to an existing object.
+		 * Don't enter the name into the namespace, but look it up
+		 * for use later.
+		 */
+		status =
+		    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
+				   object_type, ACPI_IMODE_EXECUTE,
+				   ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+		break;
+
+	case AML_SCOPE_OP:
+
+		/* Special case for Scope(\) -> refers to the Root node */
+
+		if (op && (op->named.node == acpi_gbl_root_node)) {
+			node = op->named.node;
+
+			status =
+			    acpi_ds_scope_stack_push(node, object_type,
+						     walk_state);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+		} else {
+			/*
+			 * The Path is an object reference to an existing object.
+			 * Don't enter the name into the namespace, but look it up
+			 * for use later.
+			 */
+			status =
+			    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
+					   object_type, ACPI_IMODE_EXECUTE,
+					   ACPI_NS_SEARCH_PARENT, walk_state,
+					   &(node));
+			if (ACPI_FAILURE(status)) {
+#ifdef ACPI_ASL_COMPILER
+				if (status == AE_NOT_FOUND) {
+					status = AE_OK;
+				} else {
+					ACPI_ERROR_NAMESPACE(buffer_ptr,
+							     status);
+				}
+#else
+				ACPI_ERROR_NAMESPACE(buffer_ptr, status);
+#endif
+				return_ACPI_STATUS(status);
+			}
+		}
+
+		/*
+		 * We must check to make sure that the target is
+		 * one of the opcodes that actually opens a scope
+		 */
+		switch (node->type) {
+		case ACPI_TYPE_ANY:
+		case ACPI_TYPE_LOCAL_SCOPE:	/* Scope */
+		case ACPI_TYPE_DEVICE:
+		case ACPI_TYPE_POWER:
+		case ACPI_TYPE_PROCESSOR:
+		case ACPI_TYPE_THERMAL:
+
+			/* These are acceptable types */
+			break;
+
+		case ACPI_TYPE_INTEGER:
+		case ACPI_TYPE_STRING:
+		case ACPI_TYPE_BUFFER:
+
+			/*
+			 * These types we will allow, but we will change the type.
+			 * This enables some existing code of the form:
+			 *
+			 *  Name (DEB, 0)
+			 *  Scope (DEB) { ... }
+			 */
+			ACPI_WARNING((AE_INFO,
+				      "Type override - [%4.4s] had invalid type (%s) "
+				      "for Scope operator, changed to type ANY\n",
+				      acpi_ut_get_node_name(node),
+				      acpi_ut_get_type_name(node->type)));
+
+			node->type = ACPI_TYPE_ANY;
+			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+			break;
+
+		default:
+
+			/* All other types are an error */
+
+			ACPI_ERROR((AE_INFO,
+				    "Invalid type (%s) for target of "
+				    "Scope operator [%4.4s] (Cannot override)",
+				    acpi_ut_get_type_name(node->type),
+				    acpi_ut_get_node_name(node)));
+
+			return (AE_AML_OPERAND_TYPE);
+		}
+		break;
+
+	default:
+
+		/* All other opcodes */
+
+		if (op && op->common.node) {
+
+			/* This op/node was previously entered into the namespace */
+
+			node = op->common.node;
+
+			if (acpi_ns_opens_scope(object_type)) {
+				status =
+				    acpi_ds_scope_stack_push(node, object_type,
+							     walk_state);
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+			}
+
+			return_ACPI_STATUS(AE_OK);
+		}
+
+		/*
+		 * Enter the named type into the internal namespace. We enter the name
+		 * as we go downward in the parse tree. Any necessary subobjects that
+		 * involve arguments to the opcode must be created as we go back up the
+		 * parse tree later.
+		 *
+		 * Note: Name may already exist if we are executing a deferred opcode.
+		 */
+		if (walk_state->deferred_node) {
+
+			/* This name is already in the namespace, get the node */
+
+			node = walk_state->deferred_node;
+			status = AE_OK;
+			break;
+		}
+
+		flags = ACPI_NS_NO_UPSEARCH;
+		if (walk_state->pass_number == ACPI_IMODE_EXECUTE) {
+
+			/* Execution mode, node cannot already exist, node is temporary */
+
+			flags |= ACPI_NS_ERROR_IF_FOUND;
+
+			if (!
+			    (walk_state->
+			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
+				flags |= ACPI_NS_TEMPORARY;
+			}
+		}
+
+		/* Add new entry or lookup existing entry */
+
+		status =
+		    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
+				   object_type, ACPI_IMODE_LOAD_PASS2, flags,
+				   walk_state, &node);
+
+		if (ACPI_SUCCESS(status) && (flags & ACPI_NS_TEMPORARY)) {
+			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+					  "***New Node [%4.4s] %p is temporary\n",
+					  acpi_ut_get_node_name(node), node));
+		}
+		break;
+	}
+
+	if (ACPI_FAILURE(status)) {
+		ACPI_ERROR_NAMESPACE(buffer_ptr, status);
+		return_ACPI_STATUS(status);
+	}
+
+	if (!op) {
+
+		/* Create a new op */
+
+		op = acpi_ps_alloc_op(walk_state->opcode);
+		if (!op) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+
+		/* Initialize the new op */
+
+		if (node) {
+			op->named.name = node->name.integer;
+		}
+		*out_op = op;
+	}
+
+	/*
+	 * Put the Node in the "op" object that the parser uses, so we
+	 * can get it again quickly when this scope is closed
+	 */
+	op->common.node = node;
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load2_end_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Ascending callback used during the loading of the namespace,
+ *              both control methods and everything else.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
+{
+	union acpi_parse_object *op;
+	acpi_status status = AE_OK;
+	acpi_object_type object_type;
+	struct acpi_namespace_node *node;
+	union acpi_parse_object *arg;
+	struct acpi_namespace_node *new_node;
+#ifndef ACPI_NO_METHOD_EXECUTION
+	u32 i;
+	u8 region_space;
+#endif
+
+	ACPI_FUNCTION_TRACE(ds_load2_end_op);
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
+			  walk_state->op_info->name, op, walk_state));
+
+	/* Check if opcode had an associated namespace object */
+
+	if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	if (op->common.aml_opcode == AML_SCOPE_OP) {
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "Ending scope Op=%p State=%p\n", op,
+				  walk_state));
+	}
+
+	object_type = walk_state->op_info->object_type;
+
+	/*
+	 * Get the Node/name from the earlier lookup
+	 * (It was saved in the *op structure)
+	 */
+	node = op->common.node;
+
+	/*
+	 * Put the Node on the object stack (Contains the ACPI Name of
+	 * this object)
+	 */
+	walk_state->operands[0] = (void *)node;
+	walk_state->num_operands = 1;
+
+	/* Pop the scope stack */
+
+	if (acpi_ns_opens_scope(object_type) &&
+	    (op->common.aml_opcode != AML_INT_METHODCALL_OP)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "(%s) Popping scope for Op %p\n",
+				  acpi_ut_get_type_name(object_type), op));
+
+		status = acpi_ds_scope_stack_pop(walk_state);
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+	}
+
+	/*
+	 * Named operations are as follows:
+	 *
+	 * AML_ALIAS
+	 * AML_BANKFIELD
+	 * AML_CREATEBITFIELD
+	 * AML_CREATEBYTEFIELD
+	 * AML_CREATEDWORDFIELD
+	 * AML_CREATEFIELD
+	 * AML_CREATEQWORDFIELD
+	 * AML_CREATEWORDFIELD
+	 * AML_DATA_REGION
+	 * AML_DEVICE
+	 * AML_EVENT
+	 * AML_FIELD
+	 * AML_INDEXFIELD
+	 * AML_METHOD
+	 * AML_METHODCALL
+	 * AML_MUTEX
+	 * AML_NAME
+	 * AML_NAMEDFIELD
+	 * AML_OPREGION
+	 * AML_POWERRES
+	 * AML_PROCESSOR
+	 * AML_SCOPE
+	 * AML_THERMALZONE
+	 */
+
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+			  "Create-Load [%s] State=%p Op=%p NamedObj=%p\n",
+			  acpi_ps_get_opcode_name(op->common.aml_opcode),
+			  walk_state, op, node));
+
+	/* Decode the opcode */
+
+	arg = op->common.value.arg;
+
+	switch (walk_state->op_info->type) {
+#ifndef ACPI_NO_METHOD_EXECUTION
+
+	case AML_TYPE_CREATE_FIELD:
+		/*
+		 * Create the field object, but the field buffer and index must
+		 * be evaluated later during the execution phase
+		 */
+		status = acpi_ds_create_buffer_field(op, walk_state);
+		break;
+
+	case AML_TYPE_NAMED_FIELD:
+		/*
+		 * If we are executing a method, initialize the field
+		 */
+		if (walk_state->method_node) {
+			status = acpi_ds_init_field_objects(op, walk_state);
+		}
+
+		switch (op->common.aml_opcode) {
+		case AML_INDEX_FIELD_OP:
+
+			status =
+			    acpi_ds_create_index_field(op,
+						       (acpi_handle) arg->
+						       common.node, walk_state);
+			break;
+
+		case AML_BANK_FIELD_OP:
+
+			status =
+			    acpi_ds_create_bank_field(op, arg->common.node,
+						      walk_state);
+			break;
+
+		case AML_FIELD_OP:
+
+			status =
+			    acpi_ds_create_field(op, arg->common.node,
+						 walk_state);
+			break;
+
+		default:
+			/* All NAMED_FIELD opcodes must be handled above */
+			break;
+		}
+		break;
+
+	case AML_TYPE_NAMED_SIMPLE:
+
+		status = acpi_ds_create_operands(walk_state, arg);
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+
+		switch (op->common.aml_opcode) {
+		case AML_PROCESSOR_OP:
+
+			status = acpi_ex_create_processor(walk_state);
+			break;
+
+		case AML_POWER_RES_OP:
+
+			status = acpi_ex_create_power_resource(walk_state);
+			break;
+
+		case AML_MUTEX_OP:
+
+			status = acpi_ex_create_mutex(walk_state);
+			break;
+
+		case AML_EVENT_OP:
+
+			status = acpi_ex_create_event(walk_state);
+			break;
+
+		case AML_ALIAS_OP:
+
+			status = acpi_ex_create_alias(walk_state);
+			break;
+
+		default:
+			/* Unknown opcode */
+
+			status = AE_OK;
+			goto cleanup;
+		}
+
+		/* Delete operands */
+
+		for (i = 1; i < walk_state->num_operands; i++) {
+			acpi_ut_remove_reference(walk_state->operands[i]);
+			walk_state->operands[i] = NULL;
+		}
+
+		break;
+#endif				/* ACPI_NO_METHOD_EXECUTION */
+
+	case AML_TYPE_NAMED_COMPLEX:
+
+		switch (op->common.aml_opcode) {
+#ifndef ACPI_NO_METHOD_EXECUTION
+		case AML_REGION_OP:
+		case AML_DATA_REGION_OP:
+
+			if (op->common.aml_opcode == AML_REGION_OP) {
+				region_space = (acpi_adr_space_type)
+				    ((op->common.value.arg)->common.value.
+				     integer);
+			} else {
+				region_space = REGION_DATA_TABLE;
+			}
+
+			/*
+			 * The op_region is not fully parsed at this time. The only valid
+			 * argument is the space_id. (We must save the address of the
+			 * AML of the address and length operands)
+			 *
+			 * If we have a valid region, initialize it. The namespace is
+			 * unlocked at this point.
+			 *
+			 * Need to unlock interpreter if it is locked (if we are running
+			 * a control method), in order to allow _REG methods to be run
+			 * during acpi_ev_initialize_region.
+			 */
+			if (walk_state->method_node) {
+				/*
+				 * Executing a method: initialize the region and unlock
+				 * the interpreter
+				 */
+				status =
+				    acpi_ex_create_region(op->named.data,
+							  op->named.length,
+							  region_space,
+							  walk_state);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+
+				acpi_ex_exit_interpreter();
+			}
+
+			status =
+			    acpi_ev_initialize_region
+			    (acpi_ns_get_attached_object(node), FALSE);
+			if (walk_state->method_node) {
+				acpi_ex_enter_interpreter();
+			}
+
+			if (ACPI_FAILURE(status)) {
+				/*
+				 *  If AE_NOT_EXIST is returned, it is not fatal
+				 *  because many regions get created before a handler
+				 *  is installed for said region.
+				 */
+				if (AE_NOT_EXIST == status) {
+					status = AE_OK;
+				}
+			}
+			break;
+
+		case AML_NAME_OP:
+
+			status = acpi_ds_create_node(walk_state, node, op);
+			break;
+
+		case AML_METHOD_OP:
+			/*
+			 * method_op pkg_length name_string method_flags term_list
+			 *
+			 * Note: We must create the method node/object pair as soon as we
+			 * see the method declaration. This allows later pass1 parsing
+			 * of invocations of the method (need to know the number of
+			 * arguments.)
+			 */
+			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+					  "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
+					  walk_state, op, op->named.node));
+
+			if (!acpi_ns_get_attached_object(op->named.node)) {
+				walk_state->operands[0] =
+				    ACPI_CAST_PTR(void, op->named.node);
+				walk_state->num_operands = 1;
+
+				status =
+				    acpi_ds_create_operands(walk_state,
+							    op->common.value.
+							    arg);
+				if (ACPI_SUCCESS(status)) {
+					status =
+					    acpi_ex_create_method(op->named.
+								  data,
+								  op->named.
+								  length,
+								  walk_state);
+				}
+				walk_state->operands[0] = NULL;
+				walk_state->num_operands = 0;
+
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+			}
+			break;
+
+#endif				/* ACPI_NO_METHOD_EXECUTION */
+
+		default:
+			/* All NAMED_COMPLEX opcodes must be handled above */
+			break;
+		}
+		break;
+
+	case AML_CLASS_INTERNAL:
+
+		/* case AML_INT_NAMEPATH_OP: */
+		break;
+
+	case AML_CLASS_METHOD_CALL:
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "RESOLVING-MethodCall: State=%p Op=%p NamedObj=%p\n",
+				  walk_state, op, node));
+
+		/*
+		 * Lookup the method name and save the Node
+		 */
+		status =
+		    acpi_ns_lookup(walk_state->scope_info,
+				   arg->common.value.string, ACPI_TYPE_ANY,
+				   ACPI_IMODE_LOAD_PASS2,
+				   ACPI_NS_SEARCH_PARENT |
+				   ACPI_NS_DONT_OPEN_SCOPE, walk_state,
+				   &(new_node));
+		if (ACPI_SUCCESS(status)) {
+			/*
+			 * Make sure that what we found is indeed a method
+			 * We didn't search for a method on purpose, to see if the name
+			 * would resolve
+			 */
+			if (new_node->type != ACPI_TYPE_METHOD) {
+				status = AE_AML_OPERAND_TYPE;
+			}
+
+			/* We could put the returned object (Node) on the object stack for
+			 * later, but for now, we will put it in the "op" object that the
+			 * parser uses, so we can get it again at the end of this scope
+			 */
+			op->common.node = new_node;
+		} else {
+			ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
+		}
+		break;
+
+	default:
+		break;
+	}
+
+      cleanup:
+
+	/* Remove the Node pushed at the very beginning */
+
+	walk_state->operands[0] = NULL;
+	walk_state->num_operands = 0;
+	return_ACPI_STATUS(status);
+}
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 14988a8..65c79ad 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -373,6 +373,15 @@
 
 			gpe_register_info = &gpe_block->register_info[i];
 
+			/*
+			 * Optimization: If there are no GPEs enabled within this
+			 * register, we can safely ignore the entire register.
+			 */
+			if (!(gpe_register_info->enable_for_run |
+			      gpe_register_info->enable_for_wake)) {
+				continue;
+			}
+
 			/* Read the Status Register */
 
 			status =
@@ -457,6 +466,7 @@
 	acpi_status status;
 	struct acpi_gpe_event_info *local_gpe_event_info;
 	struct acpi_evaluate_info *info;
+	struct acpi_gpe_notify_object *notify_object;
 
 	ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
 
@@ -508,10 +518,18 @@
 		 * from this thread -- because handlers may in turn run other
 		 * control methods.
 		 */
-		status =
-		    acpi_ev_queue_notify_request(local_gpe_event_info->dispatch.
-						 device_node,
-						 ACPI_NOTIFY_DEVICE_WAKE);
+		status = acpi_ev_queue_notify_request(
+				local_gpe_event_info->dispatch.device.node,
+				ACPI_NOTIFY_DEVICE_WAKE);
+
+		notify_object = local_gpe_event_info->dispatch.device.next;
+		while (ACPI_SUCCESS(status) && notify_object) {
+			status = acpi_ev_queue_notify_request(
+					notify_object->node,
+					ACPI_NOTIFY_DEVICE_WAKE);
+			notify_object = notify_object->next;
+		}
+
 		break;
 
 	case ACPI_GPE_DISPATCH_METHOD:
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 785a5ee..bea7223 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -231,6 +231,8 @@
 		}
 	}
 
+	acpi_gbl_reg_methods_executed = TRUE;
+
 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 	return_ACPI_STATUS(status);
 }
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 3b20a34..52aaff3 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -198,7 +198,9 @@
 	acpi_status status = AE_BAD_PARAMETER;
 	struct acpi_gpe_event_info *gpe_event_info;
 	struct acpi_namespace_node *device_node;
+	struct acpi_gpe_notify_object *notify_object;
 	acpi_cpu_flags flags;
+	u8 gpe_dispatch_mask;
 
 	ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake);
 
@@ -221,27 +223,49 @@
 		goto unlock_and_exit;
 	}
 
+	if (wake_device == ACPI_ROOT_OBJECT) {
+		goto out;
+	}
+
 	/*
 	 * If there is no method or handler for this GPE, then the
 	 * wake_device will be notified whenever this GPE fires (aka
 	 * "implicit notify") Note: The GPE is assumed to be
 	 * level-triggered (for windows compatibility).
 	 */
-	if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
-	      ACPI_GPE_DISPATCH_NONE) && (wake_device != ACPI_ROOT_OBJECT)) {
-
-		/* Validate wake_device is of type Device */
-
-		device_node = ACPI_CAST_PTR(struct acpi_namespace_node,
-					    wake_device);
-		if (device_node->type != ACPI_TYPE_DEVICE) {
-			goto unlock_and_exit;
-		}
-		gpe_event_info->flags = (ACPI_GPE_DISPATCH_NOTIFY |
-					 ACPI_GPE_LEVEL_TRIGGERED);
-		gpe_event_info->dispatch.device_node = device_node;
+	gpe_dispatch_mask = gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK;
+	if (gpe_dispatch_mask != ACPI_GPE_DISPATCH_NONE
+	    && gpe_dispatch_mask != ACPI_GPE_DISPATCH_NOTIFY) {
+		goto out;
 	}
 
+	/* Validate wake_device is of type Device */
+
+	device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
+	if (device_node->type != ACPI_TYPE_DEVICE) {
+		goto unlock_and_exit;
+	}
+
+	if (gpe_dispatch_mask == ACPI_GPE_DISPATCH_NONE) {
+		gpe_event_info->flags = (ACPI_GPE_DISPATCH_NOTIFY |
+					 ACPI_GPE_LEVEL_TRIGGERED);
+		gpe_event_info->dispatch.device.node = device_node;
+		gpe_event_info->dispatch.device.next = NULL;
+	} else {
+		/* There are multiple devices to notify implicitly. */
+
+		notify_object = ACPI_ALLOCATE_ZEROED(sizeof(*notify_object));
+		if (!notify_object) {
+			status = AE_NO_MEMORY;
+			goto unlock_and_exit;
+		}
+
+		notify_object->node = device_node;
+		notify_object->next = gpe_event_info->dispatch.device.next;
+		gpe_event_info->dispatch.device.next = notify_object;
+	}
+
+ out:
 	gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
 	status = AE_OK;
 
diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c
index eb73867..c85c8c4 100644
--- a/drivers/acpi/acpica/evxfregn.c
+++ b/drivers/acpi/acpica/evxfregn.c
@@ -110,9 +110,39 @@
 		goto unlock_and_exit;
 	}
 
-	/* Run all _REG methods for this address space */
+	/*
+	 * For the default space_iDs, (the IDs for which there are default region handlers
+	 * installed) Only execute the _REG methods if the global initialization _REG
+	 * methods have already been run (via acpi_initialize_objects). In other words,
+	 * we will defer the execution of the _REG methods for these space_iDs until
+	 * execution of acpi_initialize_objects. This is done because we need the handlers
+	 * for the default spaces (mem/io/pci/table) to be installed before we can run
+	 * any control methods (or _REG methods). There is known BIOS code that depends
+	 * on this.
+	 *
+	 * For all other space_iDs, we can safely execute the _REG methods immediately.
+	 * This means that for IDs like embedded_controller, this function should be called
+	 * only after acpi_enable_subsystem has been called.
+	 */
+	switch (space_id) {
+	case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+	case ACPI_ADR_SPACE_SYSTEM_IO:
+	case ACPI_ADR_SPACE_PCI_CONFIG:
+	case ACPI_ADR_SPACE_DATA_TABLE:
 
-	status = acpi_ev_execute_reg_methods(node, space_id);
+		if (acpi_gbl_reg_methods_executed) {
+
+			/* Run all _REG methods for this address space */
+
+			status = acpi_ev_execute_reg_methods(node, space_id);
+		}
+		break;
+
+	default:
+
+		status = acpi_ev_execute_reg_methods(node, space_id);
+		break;
+	}
 
       unlock_and_exit:
 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index 6c79c29..f915a7f 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -280,13 +280,13 @@
 	if (ACPI_FAILURE(status)) {
 		if (status == AE_NOT_IMPLEMENTED) {
 			ACPI_ERROR((AE_INFO,
-				    "Region %s(0x%X) not implemented",
+				    "Region %s (ID=%u) not implemented",
 				    acpi_ut_get_region_name(rgn_desc->region.
 							    space_id),
 				    rgn_desc->region.space_id));
 		} else if (status == AE_NOT_EXIST) {
 			ACPI_ERROR((AE_INFO,
-				    "Region %s(0x%X) has no handler",
+				    "Region %s (ID=%u) has no handler",
 				    acpi_ut_get_region_name(rgn_desc->region.
 							    space_id),
 				    rgn_desc->region.space_id));
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 428d44e..6f5588e 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -384,8 +384,11 @@
 	 *
 	 * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at
 	 * offset 45, 55, 95, and the word located at offset 109, 110.
+	 *
+	 * Note: The FADT revision value is unreliable. Only the length can be
+	 * trusted.
 	 */
-	if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) {
+	if (acpi_gbl_FADT.header.length <= ACPI_FADT_V2_SIZE) {
 		acpi_gbl_FADT.preferred_profile = 0;
 		acpi_gbl_FADT.pstate_control = 0;
 		acpi_gbl_FADT.cst_control = 0;
diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c
new file mode 100644
index 0000000..136a814
--- /dev/null
+++ b/drivers/acpi/acpica/utdecode.c
@@ -0,0 +1,548 @@
+/******************************************************************************
+ *
+ * Module Name: utdecode - Utility decoding routines (value-to-string)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utdecode")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_format_exception
+ *
+ * PARAMETERS:  Status       - The acpi_status code to be formatted
+ *
+ * RETURN:      A string containing the exception text. A valid pointer is
+ *              always returned.
+ *
+ * DESCRIPTION: This function translates an ACPI exception into an ASCII string
+ *              It is here instead of utxface.c so it is always present.
+ *
+ ******************************************************************************/
+const char *acpi_format_exception(acpi_status status)
+{
+	const char *exception = NULL;
+
+	ACPI_FUNCTION_ENTRY();
+
+	exception = acpi_ut_validate_exception(status);
+	if (!exception) {
+
+		/* Exception code was not recognized */
+
+		ACPI_ERROR((AE_INFO,
+			    "Unknown exception code: 0x%8.8X", status));
+
+		exception = "UNKNOWN_STATUS_CODE";
+	}
+
+	return (ACPI_CAST_PTR(const char, exception));
+}
+
+ACPI_EXPORT_SYMBOL(acpi_format_exception)
+
+/*
+ * Properties of the ACPI Object Types, both internal and external.
+ * The table is indexed by values of acpi_object_type
+ */
+const u8 acpi_gbl_ns_properties[ACPI_NUM_NS_TYPES] = {
+	ACPI_NS_NORMAL,		/* 00 Any              */
+	ACPI_NS_NORMAL,		/* 01 Number           */
+	ACPI_NS_NORMAL,		/* 02 String           */
+	ACPI_NS_NORMAL,		/* 03 Buffer           */
+	ACPI_NS_NORMAL,		/* 04 Package          */
+	ACPI_NS_NORMAL,		/* 05 field_unit       */
+	ACPI_NS_NEWSCOPE,	/* 06 Device           */
+	ACPI_NS_NORMAL,		/* 07 Event            */
+	ACPI_NS_NEWSCOPE,	/* 08 Method           */
+	ACPI_NS_NORMAL,		/* 09 Mutex            */
+	ACPI_NS_NORMAL,		/* 10 Region           */
+	ACPI_NS_NEWSCOPE,	/* 11 Power            */
+	ACPI_NS_NEWSCOPE,	/* 12 Processor        */
+	ACPI_NS_NEWSCOPE,	/* 13 Thermal          */
+	ACPI_NS_NORMAL,		/* 14 buffer_field     */
+	ACPI_NS_NORMAL,		/* 15 ddb_handle       */
+	ACPI_NS_NORMAL,		/* 16 Debug Object     */
+	ACPI_NS_NORMAL,		/* 17 def_field        */
+	ACPI_NS_NORMAL,		/* 18 bank_field       */
+	ACPI_NS_NORMAL,		/* 19 index_field      */
+	ACPI_NS_NORMAL,		/* 20 Reference        */
+	ACPI_NS_NORMAL,		/* 21 Alias            */
+	ACPI_NS_NORMAL,		/* 22 method_alias     */
+	ACPI_NS_NORMAL,		/* 23 Notify           */
+	ACPI_NS_NORMAL,		/* 24 Address Handler  */
+	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,	/* 25 Resource Desc    */
+	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,	/* 26 Resource Field   */
+	ACPI_NS_NEWSCOPE,	/* 27 Scope            */
+	ACPI_NS_NORMAL,		/* 28 Extra            */
+	ACPI_NS_NORMAL,		/* 29 Data             */
+	ACPI_NS_NORMAL		/* 30 Invalid          */
+};
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_hex_to_ascii_char
+ *
+ * PARAMETERS:  Integer             - Contains the hex digit
+ *              Position            - bit position of the digit within the
+ *                                    integer (multiple of 4)
+ *
+ * RETURN:      The converted Ascii character
+ *
+ * DESCRIPTION: Convert a hex digit to an Ascii character
+ *
+ ******************************************************************************/
+
+/* Hex to ASCII conversion table */
+
+static const char acpi_gbl_hex_to_ascii[] = {
+	'0', '1', '2', '3', '4', '5', '6', '7',
+	'8', '9', 'A', 'B', 'C', 'D', 'E', 'F'
+};
+
+char acpi_ut_hex_to_ascii_char(u64 integer, u32 position)
+{
+
+	return (acpi_gbl_hex_to_ascii[(integer >> position) & 0xF]);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_get_region_name
+ *
+ * PARAMETERS:  Space ID            - ID for the region
+ *
+ * RETURN:      Decoded region space_id name
+ *
+ * DESCRIPTION: Translate a Space ID into a name string (Debug only)
+ *
+ ******************************************************************************/
+
+/* Region type decoding */
+
+const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = {
+	"SystemMemory",
+	"SystemIO",
+	"PCI_Config",
+	"EmbeddedControl",
+	"SMBus",
+	"SystemCMOS",
+	"PCIBARTarget",
+	"IPMI",
+	"DataTable"
+};
+
+char *acpi_ut_get_region_name(u8 space_id)
+{
+
+	if (space_id >= ACPI_USER_REGION_BEGIN) {
+		return ("UserDefinedRegion");
+	} else if (space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) {
+		return ("FunctionalFixedHW");
+	} else if (space_id >= ACPI_NUM_PREDEFINED_REGIONS) {
+		return ("InvalidSpaceId");
+	}
+
+	return (ACPI_CAST_PTR(char, acpi_gbl_region_types[space_id]));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_get_event_name
+ *
+ * PARAMETERS:  event_id            - Fixed event ID
+ *
+ * RETURN:      Decoded event ID name
+ *
+ * DESCRIPTION: Translate a Event ID into a name string (Debug only)
+ *
+ ******************************************************************************/
+
+/* Event type decoding */
+
+static const char *acpi_gbl_event_types[ACPI_NUM_FIXED_EVENTS] = {
+	"PM_Timer",
+	"GlobalLock",
+	"PowerButton",
+	"SleepButton",
+	"RealTimeClock",
+};
+
+char *acpi_ut_get_event_name(u32 event_id)
+{
+
+	if (event_id > ACPI_EVENT_MAX) {
+		return ("InvalidEventID");
+	}
+
+	return (ACPI_CAST_PTR(char, acpi_gbl_event_types[event_id]));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_get_type_name
+ *
+ * PARAMETERS:  Type                - An ACPI object type
+ *
+ * RETURN:      Decoded ACPI object type name
+ *
+ * DESCRIPTION: Translate a Type ID into a name string (Debug only)
+ *
+ ******************************************************************************/
+
+/*
+ * Elements of acpi_gbl_ns_type_names below must match
+ * one-to-one with values of acpi_object_type
+ *
+ * The type ACPI_TYPE_ANY (Untyped) is used as a "don't care" when searching;
+ * when stored in a table it really means that we have thus far seen no
+ * evidence to indicate what type is actually going to be stored for this entry.
+ */
+static const char acpi_gbl_bad_type[] = "UNDEFINED";
+
+/* Printable names of the ACPI object types */
+
+static const char *acpi_gbl_ns_type_names[] = {
+	/* 00 */ "Untyped",
+	/* 01 */ "Integer",
+	/* 02 */ "String",
+	/* 03 */ "Buffer",
+	/* 04 */ "Package",
+	/* 05 */ "FieldUnit",
+	/* 06 */ "Device",
+	/* 07 */ "Event",
+	/* 08 */ "Method",
+	/* 09 */ "Mutex",
+	/* 10 */ "Region",
+	/* 11 */ "Power",
+	/* 12 */ "Processor",
+	/* 13 */ "Thermal",
+	/* 14 */ "BufferField",
+	/* 15 */ "DdbHandle",
+	/* 16 */ "DebugObject",
+	/* 17 */ "RegionField",
+	/* 18 */ "BankField",
+	/* 19 */ "IndexField",
+	/* 20 */ "Reference",
+	/* 21 */ "Alias",
+	/* 22 */ "MethodAlias",
+	/* 23 */ "Notify",
+	/* 24 */ "AddrHandler",
+	/* 25 */ "ResourceDesc",
+	/* 26 */ "ResourceFld",
+	/* 27 */ "Scope",
+	/* 28 */ "Extra",
+	/* 29 */ "Data",
+	/* 30 */ "Invalid"
+};
+
+char *acpi_ut_get_type_name(acpi_object_type type)
+{
+
+	if (type > ACPI_TYPE_INVALID) {
+		return (ACPI_CAST_PTR(char, acpi_gbl_bad_type));
+	}
+
+	return (ACPI_CAST_PTR(char, acpi_gbl_ns_type_names[type]));
+}
+
+char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc)
+{
+
+	if (!obj_desc) {
+		return ("[NULL Object Descriptor]");
+	}
+
+	return (acpi_ut_get_type_name(obj_desc->common.type));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_get_node_name
+ *
+ * PARAMETERS:  Object               - A namespace node
+ *
+ * RETURN:      ASCII name of the node
+ *
+ * DESCRIPTION: Validate the node and return the node's ACPI name.
+ *
+ ******************************************************************************/
+
+char *acpi_ut_get_node_name(void *object)
+{
+	struct acpi_namespace_node *node = (struct acpi_namespace_node *)object;
+
+	/* Must return a string of exactly 4 characters == ACPI_NAME_SIZE */
+
+	if (!object) {
+		return ("NULL");
+	}
+
+	/* Check for Root node */
+
+	if ((object == ACPI_ROOT_OBJECT) || (object == acpi_gbl_root_node)) {
+		return ("\"\\\" ");
+	}
+
+	/* Descriptor must be a namespace node */
+
+	if (ACPI_GET_DESCRIPTOR_TYPE(node) != ACPI_DESC_TYPE_NAMED) {
+		return ("####");
+	}
+
+	/*
+	 * Ensure name is valid. The name was validated/repaired when the node
+	 * was created, but make sure it has not been corrupted.
+	 */
+	acpi_ut_repair_name(node->name.ascii);
+
+	/* Return the name */
+
+	return (node->name.ascii);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_get_descriptor_name
+ *
+ * PARAMETERS:  Object               - An ACPI object
+ *
+ * RETURN:      Decoded name of the descriptor type
+ *
+ * DESCRIPTION: Validate object and return the descriptor type
+ *
+ ******************************************************************************/
+
+/* Printable names of object descriptor types */
+
+static const char *acpi_gbl_desc_type_names[] = {
+	/* 00 */ "Not a Descriptor",
+	/* 01 */ "Cached",
+	/* 02 */ "State-Generic",
+	/* 03 */ "State-Update",
+	/* 04 */ "State-Package",
+	/* 05 */ "State-Control",
+	/* 06 */ "State-RootParseScope",
+	/* 07 */ "State-ParseScope",
+	/* 08 */ "State-WalkScope",
+	/* 09 */ "State-Result",
+	/* 10 */ "State-Notify",
+	/* 11 */ "State-Thread",
+	/* 12 */ "Walk",
+	/* 13 */ "Parser",
+	/* 14 */ "Operand",
+	/* 15 */ "Node"
+};
+
+char *acpi_ut_get_descriptor_name(void *object)
+{
+
+	if (!object) {
+		return ("NULL OBJECT");
+	}
+
+	if (ACPI_GET_DESCRIPTOR_TYPE(object) > ACPI_DESC_TYPE_MAX) {
+		return ("Not a Descriptor");
+	}
+
+	return (ACPI_CAST_PTR(char,
+			      acpi_gbl_desc_type_names[ACPI_GET_DESCRIPTOR_TYPE
+						       (object)]));
+
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_get_reference_name
+ *
+ * PARAMETERS:  Object               - An ACPI reference object
+ *
+ * RETURN:      Decoded name of the type of reference
+ *
+ * DESCRIPTION: Decode a reference object sub-type to a string.
+ *
+ ******************************************************************************/
+
+/* Printable names of reference object sub-types */
+
+static const char *acpi_gbl_ref_class_names[] = {
+	/* 00 */ "Local",
+	/* 01 */ "Argument",
+	/* 02 */ "RefOf",
+	/* 03 */ "Index",
+	/* 04 */ "DdbHandle",
+	/* 05 */ "Named Object",
+	/* 06 */ "Debug"
+};
+
+const char *acpi_ut_get_reference_name(union acpi_operand_object *object)
+{
+
+	if (!object) {
+		return ("NULL Object");
+	}
+
+	if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
+		return ("Not an Operand object");
+	}
+
+	if (object->common.type != ACPI_TYPE_LOCAL_REFERENCE) {
+		return ("Not a Reference object");
+	}
+
+	if (object->reference.class > ACPI_REFCLASS_MAX) {
+		return ("Unknown Reference class");
+	}
+
+	return (acpi_gbl_ref_class_names[object->reference.class]);
+}
+
+#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
+/*
+ * Strings and procedures used for debug only
+ */
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_get_mutex_name
+ *
+ * PARAMETERS:  mutex_id        - The predefined ID for this mutex.
+ *
+ * RETURN:      Decoded name of the internal mutex
+ *
+ * DESCRIPTION: Translate a mutex ID into a name string (Debug only)
+ *
+ ******************************************************************************/
+
+/* Names for internal mutex objects, used for debug output */
+
+static char *acpi_gbl_mutex_names[ACPI_NUM_MUTEX] = {
+	"ACPI_MTX_Interpreter",
+	"ACPI_MTX_Namespace",
+	"ACPI_MTX_Tables",
+	"ACPI_MTX_Events",
+	"ACPI_MTX_Caches",
+	"ACPI_MTX_Memory",
+	"ACPI_MTX_CommandComplete",
+	"ACPI_MTX_CommandReady"
+};
+
+char *acpi_ut_get_mutex_name(u32 mutex_id)
+{
+
+	if (mutex_id > ACPI_MAX_MUTEX) {
+		return ("Invalid Mutex ID");
+	}
+
+	return (acpi_gbl_mutex_names[mutex_id]);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_get_notify_name
+ *
+ * PARAMETERS:  notify_value    - Value from the Notify() request
+ *
+ * RETURN:      Decoded name for the notify value
+ *
+ * DESCRIPTION: Translate a Notify Value to a notify namestring.
+ *
+ ******************************************************************************/
+
+/* Names for Notify() values, used for debug output */
+
+static const char *acpi_gbl_notify_value_names[] = {
+	"Bus Check",
+	"Device Check",
+	"Device Wake",
+	"Eject Request",
+	"Device Check Light",
+	"Frequency Mismatch",
+	"Bus Mode Mismatch",
+	"Power Fault",
+	"Capabilities Check",
+	"Device PLD Check",
+	"Reserved",
+	"System Locality Update"
+};
+
+const char *acpi_ut_get_notify_name(u32 notify_value)
+{
+
+	if (notify_value <= ACPI_NOTIFY_MAX) {
+		return (acpi_gbl_notify_value_names[notify_value]);
+	} else if (notify_value <= ACPI_MAX_SYS_NOTIFY) {
+		return ("Reserved");
+	} else {		/* Greater or equal to 0x80 */
+
+		return ("**Device Specific**");
+	}
+}
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_valid_object_type
+ *
+ * PARAMETERS:  Type            - Object type to be validated
+ *
+ * RETURN:      TRUE if valid object type, FALSE otherwise
+ *
+ * DESCRIPTION: Validate an object type
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_valid_object_type(acpi_object_type type)
+{
+
+	if (type > ACPI_TYPE_LOCAL_MAX) {
+
+		/* Note: Assumes all TYPEs are contiguous (external/local) */
+
+		return (FALSE);
+	}
+
+	return (TRUE);
+}
diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c
index 97dd9bb..833a38a 100644
--- a/drivers/acpi/acpica/utglobal.c
+++ b/drivers/acpi/acpica/utglobal.c
@@ -45,7 +45,6 @@
 
 #include <acpi/acpi.h>
 #include "accommon.h"
-#include "acnamesp.h"
 
 #define _COMPONENT          ACPI_UTILITIES
 ACPI_MODULE_NAME("utglobal")
@@ -107,43 +106,6 @@
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_format_exception
- *
- * PARAMETERS:  Status       - The acpi_status code to be formatted
- *
- * RETURN:      A string containing the exception text. A valid pointer is
- *              always returned.
- *
- * DESCRIPTION: This function translates an ACPI exception into an ASCII string
- *              It is here instead of utxface.c so it is always present.
- *
- ******************************************************************************/
-
-const char *acpi_format_exception(acpi_status status)
-{
-	const char *exception = NULL;
-
-	ACPI_FUNCTION_ENTRY();
-
-	exception = acpi_ut_validate_exception(status);
-	if (!exception) {
-
-		/* Exception code was not recognized */
-
-		ACPI_ERROR((AE_INFO,
-			    "Unknown exception code: 0x%8.8X", status));
-
-		exception = "UNKNOWN_STATUS_CODE";
-		dump_stack();
-	}
-
-	return (ACPI_CAST_PTR(const char, exception));
-}
-
-ACPI_EXPORT_SYMBOL(acpi_format_exception)
-
-/*******************************************************************************
- *
  * Namespace globals
  *
  ******************************************************************************/
@@ -177,71 +139,6 @@
 	{NULL, ACPI_TYPE_ANY, NULL}
 };
 
-/*
- * Properties of the ACPI Object Types, both internal and external.
- * The table is indexed by values of acpi_object_type
- */
-const u8 acpi_gbl_ns_properties[] = {
-	ACPI_NS_NORMAL,		/* 00 Any              */
-	ACPI_NS_NORMAL,		/* 01 Number           */
-	ACPI_NS_NORMAL,		/* 02 String           */
-	ACPI_NS_NORMAL,		/* 03 Buffer           */
-	ACPI_NS_NORMAL,		/* 04 Package          */
-	ACPI_NS_NORMAL,		/* 05 field_unit       */
-	ACPI_NS_NEWSCOPE,	/* 06 Device           */
-	ACPI_NS_NORMAL,		/* 07 Event            */
-	ACPI_NS_NEWSCOPE,	/* 08 Method           */
-	ACPI_NS_NORMAL,		/* 09 Mutex            */
-	ACPI_NS_NORMAL,		/* 10 Region           */
-	ACPI_NS_NEWSCOPE,	/* 11 Power            */
-	ACPI_NS_NEWSCOPE,	/* 12 Processor        */
-	ACPI_NS_NEWSCOPE,	/* 13 Thermal          */
-	ACPI_NS_NORMAL,		/* 14 buffer_field     */
-	ACPI_NS_NORMAL,		/* 15 ddb_handle       */
-	ACPI_NS_NORMAL,		/* 16 Debug Object     */
-	ACPI_NS_NORMAL,		/* 17 def_field        */
-	ACPI_NS_NORMAL,		/* 18 bank_field       */
-	ACPI_NS_NORMAL,		/* 19 index_field      */
-	ACPI_NS_NORMAL,		/* 20 Reference        */
-	ACPI_NS_NORMAL,		/* 21 Alias            */
-	ACPI_NS_NORMAL,		/* 22 method_alias     */
-	ACPI_NS_NORMAL,		/* 23 Notify           */
-	ACPI_NS_NORMAL,		/* 24 Address Handler  */
-	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,	/* 25 Resource Desc    */
-	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,	/* 26 Resource Field   */
-	ACPI_NS_NEWSCOPE,	/* 27 Scope            */
-	ACPI_NS_NORMAL,		/* 28 Extra            */
-	ACPI_NS_NORMAL,		/* 29 Data             */
-	ACPI_NS_NORMAL		/* 30 Invalid          */
-};
-
-/* Hex to ASCII conversion table */
-
-static const char acpi_gbl_hex_to_ascii[] = {
-	'0', '1', '2', '3', '4', '5', '6', '7',
-	'8', '9', 'A', 'B', 'C', 'D', 'E', 'F'
-};
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_hex_to_ascii_char
- *
- * PARAMETERS:  Integer             - Contains the hex digit
- *              Position            - bit position of the digit within the
- *                                    integer (multiple of 4)
- *
- * RETURN:      The converted Ascii character
- *
- * DESCRIPTION: Convert a hex digit to an Ascii character
- *
- ******************************************************************************/
-
-char acpi_ut_hex_to_ascii_char(u64 integer, u32 position)
-{
-
-	return (acpi_gbl_hex_to_ascii[(integer >> position) & 0xF]);
-}
-
 /******************************************************************************
  *
  * Event and Hardware globals
@@ -341,386 +238,6 @@
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ut_get_region_name
- *
- * PARAMETERS:  None.
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Translate a Space ID into a name string (Debug only)
- *
- ******************************************************************************/
-
-/* Region type decoding */
-
-const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = {
-	"SystemMemory",
-	"SystemIO",
-	"PCI_Config",
-	"EmbeddedControl",
-	"SMBus",
-	"SystemCMOS",
-	"PCIBARTarget",
-	"IPMI",
-	"DataTable"
-};
-
-char *acpi_ut_get_region_name(u8 space_id)
-{
-
-	if (space_id >= ACPI_USER_REGION_BEGIN) {
-		return ("UserDefinedRegion");
-	} else if (space_id >= ACPI_NUM_PREDEFINED_REGIONS) {
-		return ("InvalidSpaceId");
-	}
-
-	return (ACPI_CAST_PTR(char, acpi_gbl_region_types[space_id]));
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_event_name
- *
- * PARAMETERS:  None.
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Translate a Event ID into a name string (Debug only)
- *
- ******************************************************************************/
-
-/* Event type decoding */
-
-static const char *acpi_gbl_event_types[ACPI_NUM_FIXED_EVENTS] = {
-	"PM_Timer",
-	"GlobalLock",
-	"PowerButton",
-	"SleepButton",
-	"RealTimeClock",
-};
-
-char *acpi_ut_get_event_name(u32 event_id)
-{
-
-	if (event_id > ACPI_EVENT_MAX) {
-		return ("InvalidEventID");
-	}
-
-	return (ACPI_CAST_PTR(char, acpi_gbl_event_types[event_id]));
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_type_name
- *
- * PARAMETERS:  None.
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Translate a Type ID into a name string (Debug only)
- *
- ******************************************************************************/
-
-/*
- * Elements of acpi_gbl_ns_type_names below must match
- * one-to-one with values of acpi_object_type
- *
- * The type ACPI_TYPE_ANY (Untyped) is used as a "don't care" when searching;
- * when stored in a table it really means that we have thus far seen no
- * evidence to indicate what type is actually going to be stored for this entry.
- */
-static const char acpi_gbl_bad_type[] = "UNDEFINED";
-
-/* Printable names of the ACPI object types */
-
-static const char *acpi_gbl_ns_type_names[] = {
-	/* 00 */ "Untyped",
-	/* 01 */ "Integer",
-	/* 02 */ "String",
-	/* 03 */ "Buffer",
-	/* 04 */ "Package",
-	/* 05 */ "FieldUnit",
-	/* 06 */ "Device",
-	/* 07 */ "Event",
-	/* 08 */ "Method",
-	/* 09 */ "Mutex",
-	/* 10 */ "Region",
-	/* 11 */ "Power",
-	/* 12 */ "Processor",
-	/* 13 */ "Thermal",
-	/* 14 */ "BufferField",
-	/* 15 */ "DdbHandle",
-	/* 16 */ "DebugObject",
-	/* 17 */ "RegionField",
-	/* 18 */ "BankField",
-	/* 19 */ "IndexField",
-	/* 20 */ "Reference",
-	/* 21 */ "Alias",
-	/* 22 */ "MethodAlias",
-	/* 23 */ "Notify",
-	/* 24 */ "AddrHandler",
-	/* 25 */ "ResourceDesc",
-	/* 26 */ "ResourceFld",
-	/* 27 */ "Scope",
-	/* 28 */ "Extra",
-	/* 29 */ "Data",
-	/* 30 */ "Invalid"
-};
-
-char *acpi_ut_get_type_name(acpi_object_type type)
-{
-
-	if (type > ACPI_TYPE_INVALID) {
-		return (ACPI_CAST_PTR(char, acpi_gbl_bad_type));
-	}
-
-	return (ACPI_CAST_PTR(char, acpi_gbl_ns_type_names[type]));
-}
-
-char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc)
-{
-
-	if (!obj_desc) {
-		return ("[NULL Object Descriptor]");
-	}
-
-	return (acpi_ut_get_type_name(obj_desc->common.type));
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_node_name
- *
- * PARAMETERS:  Object               - A namespace node
- *
- * RETURN:      Pointer to a string
- *
- * DESCRIPTION: Validate the node and return the node's ACPI name.
- *
- ******************************************************************************/
-
-char *acpi_ut_get_node_name(void *object)
-{
-	struct acpi_namespace_node *node = (struct acpi_namespace_node *)object;
-
-	/* Must return a string of exactly 4 characters == ACPI_NAME_SIZE */
-
-	if (!object) {
-		return ("NULL");
-	}
-
-	/* Check for Root node */
-
-	if ((object == ACPI_ROOT_OBJECT) || (object == acpi_gbl_root_node)) {
-		return ("\"\\\" ");
-	}
-
-	/* Descriptor must be a namespace node */
-
-	if (ACPI_GET_DESCRIPTOR_TYPE(node) != ACPI_DESC_TYPE_NAMED) {
-		return ("####");
-	}
-
-	/* Name must be a valid ACPI name */
-
-	if (!acpi_ut_valid_acpi_name(node->name.integer)) {
-		node->name.integer = acpi_ut_repair_name(node->name.ascii);
-	}
-
-	/* Return the name */
-
-	return (node->name.ascii);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_descriptor_name
- *
- * PARAMETERS:  Object               - An ACPI object
- *
- * RETURN:      Pointer to a string
- *
- * DESCRIPTION: Validate object and return the descriptor type
- *
- ******************************************************************************/
-
-/* Printable names of object descriptor types */
-
-static const char *acpi_gbl_desc_type_names[] = {
-	/* 00 */ "Invalid",
-	/* 01 */ "Cached",
-	/* 02 */ "State-Generic",
-	/* 03 */ "State-Update",
-	/* 04 */ "State-Package",
-	/* 05 */ "State-Control",
-	/* 06 */ "State-RootParseScope",
-	/* 07 */ "State-ParseScope",
-	/* 08 */ "State-WalkScope",
-	/* 09 */ "State-Result",
-	/* 10 */ "State-Notify",
-	/* 11 */ "State-Thread",
-	/* 12 */ "Walk",
-	/* 13 */ "Parser",
-	/* 14 */ "Operand",
-	/* 15 */ "Node"
-};
-
-char *acpi_ut_get_descriptor_name(void *object)
-{
-
-	if (!object) {
-		return ("NULL OBJECT");
-	}
-
-	if (ACPI_GET_DESCRIPTOR_TYPE(object) > ACPI_DESC_TYPE_MAX) {
-		return (ACPI_CAST_PTR(char, acpi_gbl_bad_type));
-	}
-
-	return (ACPI_CAST_PTR(char,
-			      acpi_gbl_desc_type_names[ACPI_GET_DESCRIPTOR_TYPE
-						       (object)]));
-
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_reference_name
- *
- * PARAMETERS:  Object               - An ACPI reference object
- *
- * RETURN:      Pointer to a string
- *
- * DESCRIPTION: Decode a reference object sub-type to a string.
- *
- ******************************************************************************/
-
-/* Printable names of reference object sub-types */
-
-static const char *acpi_gbl_ref_class_names[] = {
-	/* 00 */ "Local",
-	/* 01 */ "Argument",
-	/* 02 */ "RefOf",
-	/* 03 */ "Index",
-	/* 04 */ "DdbHandle",
-	/* 05 */ "Named Object",
-	/* 06 */ "Debug"
-};
-
-const char *acpi_ut_get_reference_name(union acpi_operand_object *object)
-{
-	if (!object)
-		return "NULL Object";
-
-	if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND)
-		return "Not an Operand object";
-
-	if (object->common.type != ACPI_TYPE_LOCAL_REFERENCE)
-		return "Not a Reference object";
-
-	if (object->reference.class > ACPI_REFCLASS_MAX)
-		return "Unknown Reference class";
-
-	return acpi_gbl_ref_class_names[object->reference.class];
-}
-
-#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
-/*
- * Strings and procedures used for debug only
- */
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_mutex_name
- *
- * PARAMETERS:  mutex_id        - The predefined ID for this mutex.
- *
- * RETURN:      String containing the name of the mutex. Always returns a valid
- *              pointer.
- *
- * DESCRIPTION: Translate a mutex ID into a name string (Debug only)
- *
- ******************************************************************************/
-
-char *acpi_ut_get_mutex_name(u32 mutex_id)
-{
-
-	if (mutex_id > ACPI_MAX_MUTEX) {
-		return ("Invalid Mutex ID");
-	}
-
-	return (acpi_gbl_mutex_names[mutex_id]);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_notify_name
- *
- * PARAMETERS:  notify_value    - Value from the Notify() request
- *
- * RETURN:      String corresponding to the Notify Value.
- *
- * DESCRIPTION: Translate a Notify Value to a notify namestring.
- *
- ******************************************************************************/
-
-/* Names for Notify() values, used for debug output */
-
-static const char *acpi_gbl_notify_value_names[] = {
-	"Bus Check",
-	"Device Check",
-	"Device Wake",
-	"Eject Request",
-	"Device Check Light",
-	"Frequency Mismatch",
-	"Bus Mode Mismatch",
-	"Power Fault",
-	"Capabilities Check",
-	"Device PLD Check",
-	"Reserved",
-	"System Locality Update"
-};
-
-const char *acpi_ut_get_notify_name(u32 notify_value)
-{
-
-	if (notify_value <= ACPI_NOTIFY_MAX) {
-		return (acpi_gbl_notify_value_names[notify_value]);
-	} else if (notify_value <= ACPI_MAX_SYS_NOTIFY) {
-		return ("Reserved");
-	} else {		/* Greater or equal to 0x80 */
-
-		return ("**Device Specific**");
-	}
-}
-#endif
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_valid_object_type
- *
- * PARAMETERS:  Type            - Object type to be validated
- *
- * RETURN:      TRUE if valid object type, FALSE otherwise
- *
- * DESCRIPTION: Validate an object type
- *
- ******************************************************************************/
-
-u8 acpi_ut_valid_object_type(acpi_object_type type)
-{
-
-	if (type > ACPI_TYPE_LOCAL_MAX) {
-
-		/* Note: Assumes all TYPEs are contiguous (external/local) */
-
-		return (FALSE);
-	}
-
-	return (TRUE);
-}
-
-/*******************************************************************************
- *
  * FUNCTION:    acpi_ut_init_globals
  *
  * PARAMETERS:  None
@@ -806,6 +323,7 @@
 	acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT;
 	acpi_gbl_osi_data = 0;
 	acpi_gbl_osi_mutex = NULL;
+	acpi_gbl_reg_methods_executed = FALSE;
 
 	/* Hardware oriented */
 
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 76bbb78..12c28f4 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -98,6 +98,7 @@
 	struct input_dev *input;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
+	bool wakeup_enabled;
 };
 
 static const struct file_operations acpi_button_info_fops = {
@@ -430,8 +431,10 @@
 		/* Button's GPE is run-wake GPE */
 		acpi_enable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number);
-		device->wakeup.run_wake_count++;
-		device_set_wakeup_enable(&device->dev, true);
+		if (!device_may_wakeup(&device->dev)) {
+			device_set_wakeup_enable(&device->dev, true);
+			button->wakeup_enabled = true;
+		}
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
@@ -453,8 +456,8 @@
 	if (device->wakeup.flags.valid) {
 		acpi_disable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number);
-		device->wakeup.run_wake_count--;
-		device_set_wakeup_enable(&device->dev, false);
+		if (button->wakeup_enabled)
+			device_set_wakeup_enable(&device->dev, false);
 	}
 
 	acpi_button_remove_fs(device);
diff --git a/drivers/acpi/debugfs.c b/drivers/acpi/debugfs.c
index 5df67f1..384f7ab 100644
--- a/drivers/acpi/debugfs.c
+++ b/drivers/acpi/debugfs.c
@@ -26,7 +26,9 @@
 			size_t count, loff_t *ppos)
 {
 	static char *buf;
-	static int uncopied_bytes;
+	static u32 max_size;
+	static u32 uncopied_bytes;
+
 	struct acpi_table_header table;
 	acpi_status status;
 
@@ -37,19 +39,24 @@
 		if (copy_from_user(&table, user_buf,
 				   sizeof(struct acpi_table_header)))
 			return -EFAULT;
-		uncopied_bytes = table.length;
-		buf = kzalloc(uncopied_bytes, GFP_KERNEL);
+		uncopied_bytes = max_size = table.length;
+		buf = kzalloc(max_size, GFP_KERNEL);
 		if (!buf)
 			return -ENOMEM;
 	}
 
-	if (uncopied_bytes < count) {
-		kfree(buf);
+	if (buf == NULL)
 		return -EINVAL;
-	}
+
+	if ((*ppos > max_size) ||
+	    (*ppos + count > max_size) ||
+	    (*ppos + count < count) ||
+	    (count > uncopied_bytes))
+		return -EINVAL;
 
 	if (copy_from_user(buf + (*ppos), user_buf, count)) {
 		kfree(buf);
+		buf = NULL;
 		return -EFAULT;
 	}
 
@@ -59,6 +66,7 @@
 	if (!uncopied_bytes) {
 		status = acpi_install_method(buf);
 		kfree(buf);
+		buf = NULL;
 		if (ACPI_FAILURE(status))
 			return -EINVAL;
 		add_taint(TAINT_OVERRIDDEN_ACPI_TABLE);
diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c
index fa5a1df..096787b 100644
--- a/drivers/acpi/nvs.c
+++ b/drivers/acpi/nvs.c
@@ -26,6 +26,7 @@
 	unsigned int size;
 	void *kaddr;
 	void *data;
+	bool unmap;
 	struct list_head node;
 };
 
@@ -44,6 +45,9 @@
 {
 	struct nvs_page *entry, *next;
 
+	pr_info("PM: Registering ACPI NVS region at %lx (%ld bytes)\n",
+		start, size);
+
 	while (size > 0) {
 		unsigned int nr_bytes;
 
@@ -81,7 +85,13 @@
 			free_page((unsigned long)entry->data);
 			entry->data = NULL;
 			if (entry->kaddr) {
-				iounmap(entry->kaddr);
+				if (entry->unmap) {
+					iounmap(entry->kaddr);
+					entry->unmap = false;
+				} else {
+					acpi_os_unmap_memory(entry->kaddr,
+							     entry->size);
+				}
 				entry->kaddr = NULL;
 			}
 		}
@@ -115,8 +125,14 @@
 
 	list_for_each_entry(entry, &nvs_list, node)
 		if (entry->data) {
-			entry->kaddr = acpi_os_ioremap(entry->phys_start,
-						    entry->size);
+			unsigned long phys = entry->phys_start;
+			unsigned int size = entry->size;
+
+			entry->kaddr = acpi_os_get_iomem(phys, size);
+			if (!entry->kaddr) {
+				entry->kaddr = acpi_os_ioremap(phys, size);
+				entry->unmap = !!entry->kaddr;
+			}
 			if (!entry->kaddr) {
 				suspend_nvs_free();
 				return -ENOMEM;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index c90c76a..45c6ac8 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -76,7 +76,6 @@
 extern char line_buf[80];
 #endif				/*ENABLE_DEBUGGER */
 
-static unsigned int acpi_irq_irq;
 static acpi_osd_handler acpi_irq_handler;
 static void *acpi_irq_context;
 static struct workqueue_struct *kacpid_wq;
@@ -105,11 +104,11 @@
 	void __iomem *virt;
 	acpi_physical_address phys;
 	acpi_size size;
-	struct kref ref;
+	unsigned long refcount;
 };
 
 static LIST_HEAD(acpi_ioremaps);
-static DEFINE_SPINLOCK(acpi_ioremap_lock);
+static DEFINE_MUTEX(acpi_ioremap_lock);
 
 static void __init acpi_osi_setup_late(void);
 
@@ -285,6 +284,22 @@
 	return NULL;
 }
 
+void __iomem *acpi_os_get_iomem(acpi_physical_address phys, unsigned int size)
+{
+	struct acpi_ioremap *map;
+	void __iomem *virt = NULL;
+
+	mutex_lock(&acpi_ioremap_lock);
+	map = acpi_map_lookup(phys, size);
+	if (map) {
+		virt = map->virt + (phys - map->phys);
+		map->refcount++;
+	}
+	mutex_unlock(&acpi_ioremap_lock);
+	return virt;
+}
+EXPORT_SYMBOL_GPL(acpi_os_get_iomem);
+
 /* Must be called with 'acpi_ioremap_lock' or RCU read lock held. */
 static struct acpi_ioremap *
 acpi_map_lookup_virt(void __iomem *virt, acpi_size size)
@@ -302,8 +317,7 @@
 void __iomem *__init_refok
 acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
 {
-	struct acpi_ioremap *map, *tmp_map;
-	unsigned long flags;
+	struct acpi_ioremap *map;
 	void __iomem *virt;
 	acpi_physical_address pg_off;
 	acpi_size pg_sz;
@@ -316,14 +330,25 @@
 	if (!acpi_gbl_permanent_mmap)
 		return __acpi_map_table((unsigned long)phys, size);
 
+	mutex_lock(&acpi_ioremap_lock);
+	/* Check if there's a suitable mapping already. */
+	map = acpi_map_lookup(phys, size);
+	if (map) {
+		map->refcount++;
+		goto out;
+	}
+
 	map = kzalloc(sizeof(*map), GFP_KERNEL);
-	if (!map)
+	if (!map) {
+		mutex_unlock(&acpi_ioremap_lock);
 		return NULL;
+	}
 
 	pg_off = round_down(phys, PAGE_SIZE);
 	pg_sz = round_up(phys + size, PAGE_SIZE) - pg_off;
 	virt = acpi_os_ioremap(pg_off, pg_sz);
 	if (!virt) {
+		mutex_unlock(&acpi_ioremap_lock);
 		kfree(map);
 		return NULL;
 	}
@@ -332,62 +357,51 @@
 	map->virt = virt;
 	map->phys = pg_off;
 	map->size = pg_sz;
-	kref_init(&map->ref);
+	map->refcount = 1;
 
-	spin_lock_irqsave(&acpi_ioremap_lock, flags);
-	/* Check if page has already been mapped. */
-	tmp_map = acpi_map_lookup(phys, size);
-	if (tmp_map) {
-		kref_get(&tmp_map->ref);
-		spin_unlock_irqrestore(&acpi_ioremap_lock, flags);
-		iounmap(map->virt);
-		kfree(map);
-		return tmp_map->virt + (phys - tmp_map->phys);
-	}
 	list_add_tail_rcu(&map->list, &acpi_ioremaps);
-	spin_unlock_irqrestore(&acpi_ioremap_lock, flags);
 
+ out:
+	mutex_unlock(&acpi_ioremap_lock);
 	return map->virt + (phys - map->phys);
 }
 EXPORT_SYMBOL_GPL(acpi_os_map_memory);
 
-static void acpi_kref_del_iomap(struct kref *ref)
+static void acpi_os_drop_map_ref(struct acpi_ioremap *map)
 {
-	struct acpi_ioremap *map;
+	if (!--map->refcount)
+		list_del_rcu(&map->list);
+}
 
-	map = container_of(ref, struct acpi_ioremap, ref);
-	list_del_rcu(&map->list);
+static void acpi_os_map_cleanup(struct acpi_ioremap *map)
+{
+	if (!map->refcount) {
+		synchronize_rcu();
+		iounmap(map->virt);
+		kfree(map);
+	}
 }
 
 void __ref acpi_os_unmap_memory(void __iomem *virt, acpi_size size)
 {
 	struct acpi_ioremap *map;
-	unsigned long flags;
-	int del;
 
 	if (!acpi_gbl_permanent_mmap) {
 		__acpi_unmap_table(virt, size);
 		return;
 	}
 
-	spin_lock_irqsave(&acpi_ioremap_lock, flags);
+	mutex_lock(&acpi_ioremap_lock);
 	map = acpi_map_lookup_virt(virt, size);
 	if (!map) {
-		spin_unlock_irqrestore(&acpi_ioremap_lock, flags);
-		printk(KERN_ERR PREFIX "%s: bad address %p\n", __func__, virt);
-		dump_stack();
+		mutex_unlock(&acpi_ioremap_lock);
+		WARN(true, PREFIX "%s: bad address %p\n", __func__, virt);
 		return;
 	}
+	acpi_os_drop_map_ref(map);
+	mutex_unlock(&acpi_ioremap_lock);
 
-	del = kref_put(&map->ref, acpi_kref_del_iomap);
-	spin_unlock_irqrestore(&acpi_ioremap_lock, flags);
-
-	if (!del)
-		return;
-
-	synchronize_rcu();
-	iounmap(map->virt);
-	kfree(map);
+	acpi_os_map_cleanup(map);
 }
 EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
 
@@ -397,7 +411,7 @@
 		__acpi_unmap_table(virt, size);
 }
 
-int acpi_os_map_generic_address(struct acpi_generic_address *addr)
+static int acpi_os_map_generic_address(struct acpi_generic_address *addr)
 {
 	void __iomem *virt;
 
@@ -413,13 +427,10 @@
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(acpi_os_map_generic_address);
 
-void acpi_os_unmap_generic_address(struct acpi_generic_address *addr)
+static void acpi_os_unmap_generic_address(struct acpi_generic_address *addr)
 {
-	void __iomem *virt;
-	unsigned long flags;
-	acpi_size size = addr->bit_width / 8;
+	struct acpi_ioremap *map;
 
 	if (addr->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY)
 		return;
@@ -427,13 +438,17 @@
 	if (!addr->address || !addr->bit_width)
 		return;
 
-	spin_lock_irqsave(&acpi_ioremap_lock, flags);
-	virt = acpi_map_vaddr_lookup(addr->address, size);
-	spin_unlock_irqrestore(&acpi_ioremap_lock, flags);
+	mutex_lock(&acpi_ioremap_lock);
+	map = acpi_map_lookup(addr->address, addr->bit_width / 8);
+	if (!map) {
+		mutex_unlock(&acpi_ioremap_lock);
+		return;
+	}
+	acpi_os_drop_map_ref(map);
+	mutex_unlock(&acpi_ioremap_lock);
 
-	acpi_os_unmap_memory(virt, size);
+	acpi_os_map_cleanup(map);
 }
-EXPORT_SYMBOL_GPL(acpi_os_unmap_generic_address);
 
 #ifdef ACPI_FUTURE_USAGE
 acpi_status
@@ -516,11 +531,15 @@
 	acpi_irq_stats_init();
 
 	/*
-	 * Ignore the GSI from the core, and use the value in our copy of the
-	 * FADT. It may not be the same if an interrupt source override exists
-	 * for the SCI.
+	 * ACPI interrupts different from the SCI in our copy of the FADT are
+	 * not supported.
 	 */
-	gsi = acpi_gbl_FADT.sci_interrupt;
+	if (gsi != acpi_gbl_FADT.sci_interrupt)
+		return AE_BAD_PARAMETER;
+
+	if (acpi_irq_handler)
+		return AE_ALREADY_ACQUIRED;
+
 	if (acpi_gsi_to_irq(gsi, &irq) < 0) {
 		printk(KERN_ERR PREFIX "SCI (ACPI GSI %d) not registered\n",
 		       gsi);
@@ -531,20 +550,20 @@
 	acpi_irq_context = context;
 	if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) {
 		printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
+		acpi_irq_handler = NULL;
 		return AE_NOT_ACQUIRED;
 	}
-	acpi_irq_irq = irq;
 
 	return AE_OK;
 }
 
 acpi_status acpi_os_remove_interrupt_handler(u32 irq, acpi_osd_handler handler)
 {
-	if (irq) {
-		free_irq(irq, acpi_irq);
-		acpi_irq_handler = NULL;
-		acpi_irq_irq = 0;
-	}
+	if (irq != acpi_gbl_FADT.sci_interrupt)
+		return AE_BAD_PARAMETER;
+
+	free_irq(irq, acpi_irq);
+	acpi_irq_handler = NULL;
 
 	return AE_OK;
 }
@@ -1603,7 +1622,7 @@
 acpi_status acpi_os_terminate(void)
 {
 	if (acpi_irq_handler) {
-		acpi_os_remove_interrupt_handler(acpi_irq_irq,
+		acpi_os_remove_interrupt_handler(acpi_gbl_FADT.sci_interrupt,
 						 acpi_irq_handler);
 	}
 
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index b99e624..b136c9c 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -797,7 +797,6 @@
 	acpi_status status;
 	acpi_event_status event_status;
 
-	device->wakeup.run_wake_count = 0;
 	device->wakeup.flags.notifier_present = 0;
 
 	/* Power button, Lid switch always enable wakeup */
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index d6a8cd1..84f5714 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -199,8 +199,6 @@
 #endif /* CONFIG_ACPI_SLEEP */
 
 #ifdef CONFIG_SUSPEND
-extern void do_suspend_lowlevel(void);
-
 static u32 acpi_suspend_states[] = {
 	[PM_SUSPEND_ON] = ACPI_STATE_S0,
 	[PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
@@ -243,20 +241,11 @@
 static int acpi_suspend_enter(suspend_state_t pm_state)
 {
 	acpi_status status = AE_OK;
-	unsigned long flags = 0;
 	u32 acpi_state = acpi_target_sleep_state;
+	int error;
 
 	ACPI_FLUSH_CPU_CACHE();
 
-	/* Do arch specific saving of state. */
-	if (acpi_state == ACPI_STATE_S3) {
-		int error = acpi_save_state_mem();
-
-		if (error)
-			return error;
-	}
-
-	local_irq_save(flags);
 	switch (acpi_state) {
 	case ACPI_STATE_S1:
 		barrier();
@@ -264,7 +253,10 @@
 		break;
 
 	case ACPI_STATE_S3:
-		do_suspend_lowlevel();
+		error = acpi_suspend_lowlevel();
+		if (error)
+			return error;
+		pr_info(PREFIX "Low-level resume complete\n");
 		break;
 	}
 
@@ -290,13 +282,6 @@
 	/* Allow EC transactions to happen. */
 	acpi_ec_unblock_transactions_early();
 
-	local_irq_restore(flags);
-	printk(KERN_DEBUG "Back to C!\n");
-
-	/* restore processor state */
-	if (acpi_state == ACPI_STATE_S3)
-		acpi_restore_state_mem();
-
 	suspend_nvs_restore();
 
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
@@ -472,16 +457,13 @@
 static int acpi_hibernation_enter(void)
 {
 	acpi_status status = AE_OK;
-	unsigned long flags = 0;
 
 	ACPI_FLUSH_CPU_CACHE();
 
-	local_irq_save(flags);
 	/* This shouldn't return.  If it returns, we have a problem */
 	status = acpi_enter_sleep_state(ACPI_STATE_S4);
 	/* Reprogram control registers and execute _BFS */
 	acpi_leave_sleep_state_prep(ACPI_STATE_S4);
-	local_irq_restore(flags);
 
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 6fe0772..7c3b18e 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -293,19 +293,11 @@
 	}
 
 	if (enable) {
-		if (!dev->wakeup.run_wake_count++) {
-			acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
-			acpi_enable_gpe(dev->wakeup.gpe_device,
-					dev->wakeup.gpe_number);
-		}
-	} else if (dev->wakeup.run_wake_count > 0) {
-		if (!--dev->wakeup.run_wake_count) {
-			acpi_disable_gpe(dev->wakeup.gpe_device,
-					 dev->wakeup.gpe_number);
-			acpi_disable_wakeup_device_power(dev);
-		}
+		acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
+		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
 	} else {
-		error = -EALREADY;
+		acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
+		acpi_disable_wakeup_device_power(dev);
 	}
 
 	return error;
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index ef1cef7..d7bd661 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -183,13 +183,19 @@
 
 #if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
 /*
- * Module name is included in both debug and non-debug versions primarily for
- * error messages. The __FILE__ macro is not very useful for this, because it
- * often includes the entire pathname to the module
+ * The module name is used primarily for error and debug messages.
+ * The __FILE__ macro is not very useful for this, because it
+ * usually includes the entire pathname to the module making the
+ * debug output difficult to read.
  */
 #define ACPI_MODULE_NAME(name)          static const char ACPI_UNUSED_VAR _acpi_module_name[] = name;
 #else
+/*
+ * For the no-debug and no-error-msg cases, we must at least define
+ * a null module name.
+ */
 #define ACPI_MODULE_NAME(name)
+#define _acpi_module_name ""
 #endif
 
 /*
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 78ca429..f50ebb9 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -250,7 +250,6 @@
 	struct acpi_handle_list resources;
 	struct acpi_device_wakeup_flags flags;
 	int prepare_count;
-	int run_wake_count;
 };
 
 /* Device */
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index e46ec95..ec90854 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,7 +47,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20110112
+#define ACPI_CA_VERSION                 0x20110211
 
 #include "actypes.h"
 #include "actbl.h"
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 7e42bfe..d41c948 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -343,4 +343,20 @@
 #include <acpi/actbl1.h>
 #include <acpi/actbl2.h>
 
+/*
+ * Sizes of the various flavors of FADT. We need to look closely
+ * at the FADT length because the version number essentially tells
+ * us nothing because of many BIOS bugs where the version does not
+ * match the expected length. In other words, the length of the
+ * FADT is the bottom line as to what the version really is.
+ *
+ * For reference, the values below are as follows:
+ *     FADT V1  size: 0x74
+ *     FADT V2  size: 0x84
+ *     FADT V3+ size: 0xF4
+ */
+#define ACPI_FADT_V1_SIZE       (u32) (ACPI_FADT_OFFSET (flags) + 4)
+#define ACPI_FADT_V2_SIZE       (u32) (ACPI_FADT_OFFSET (reserved4[0]) + 3)
+#define ACPI_FADT_V3_SIZE       (u32) (sizeof (struct acpi_table_fadt))
+
 #endif				/* __ACTBL_H__ */
diff --git a/include/linux/acpi_io.h b/include/linux/acpi_io.h
index 7180013..4afd710 100644
--- a/include/linux/acpi_io.h
+++ b/include/linux/acpi_io.h
@@ -10,7 +10,6 @@
        return ioremap_cache(phys, size);
 }
 
-int acpi_os_map_generic_address(struct acpi_generic_address *addr);
-void acpi_os_unmap_generic_address(struct acpi_generic_address *addr);
+void __iomem *acpi_os_get_iomem(acpi_physical_address phys, unsigned int size);
 
 #endif