Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull scsi target fixes from Nicholas Bellinger:
"These are the current target pending fixes headed for v3.7-rc4 code.
This includes the following highlights:
- Fix long-standing qla2xxx target bug where certain fc_port_t state
transitions could cause the internal session b-tree list to become
out-of-sync. (Roland)
- Fix task management double free of se_cmd descriptor in exception
path for users of target_submit_tmr(). (nab)
- Re-introduce simple NOP emulation of REZERO_UNIT, SEEK_6, and
SEEK_10 SCSI-2 commands in order to support legacy initiators that
still require them. (Bernhard)
Note these three patches are also CC'ed to stable.
Also, there a couple of outstanding (external) regressions that are
still being tracked down for tcm_fc(FCoE) and tcm_vhost fabrics for
v3.7.0 code, so please expect another PULL as these issues identified
-> resolved."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: reintroduce some obsolete SCSI-2 commands
target: Fix double-free of se_cmd in target_complete_tmr_failure
qla2xxx: Update target lookup session tables when a target session changes
tcm_qla2xxx: Format VPD page 83h SCSI name string according to SPC
qla2xxx: Add missing ->vport_slock while calling qlt_update_vp_map
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index bd4708a..20fd974 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -149,6 +149,7 @@
int
qla24xx_disable_vp(scsi_qla_host_t *vha)
{
+ unsigned long flags;
int ret;
ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
@@ -156,7 +157,9 @@
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
/* Remove port id from vp target map */
+ spin_lock_irqsave(&vha->hw->vport_slock, flags);
qlt_update_vp_map(vha, RESET_AL_PA);
+ spin_unlock_irqrestore(&vha->hw->vport_slock, flags);
qla2x00_mark_vp_devices_dead(vha);
atomic_set(&vha->vp_state, VP_FAILED);
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 0e09d8f..62aa558 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -557,6 +557,7 @@
int pmap_len;
fc_port_t *fcport;
int global_resets;
+ unsigned long flags;
retry:
global_resets = atomic_read(&ha->tgt.qla_tgt->tgt_global_resets_count);
@@ -625,10 +626,10 @@
sess->s_id.b.area, sess->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.al_pa, fcport->d_id.b.area, fcport->loop_id);
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
res = true;
@@ -740,10 +741,9 @@
qlt_undelete_sess(sess);
kref_get(&sess->se_sess->sess_kref);
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
+
if (sess->local && !local)
sess->local = 0;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -796,8 +796,7 @@
*/
kref_get(&sess->se_sess->sess_kref);
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ sess->conf_compl_supported = (fcport->flags & FCF_CONF_COMP_SUPPORTED);
BUILD_BUG_ON(sizeof(sess->port_name) != sizeof(fcport->port_name));
memcpy(sess->port_name, fcport->port_name, sizeof(sess->port_name));
@@ -869,10 +868,8 @@
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf007,
"Reappeared sess %p\n", sess);
}
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
}
if (sess && sess->local) {
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 170af15..bad7495 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -648,6 +648,7 @@
int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *,
void *, uint8_t *, uint16_t);
+ void (*update_sess)(struct qla_tgt_sess *, port_id_t, uint16_t, bool);
struct qla_tgt_sess *(*find_sess_by_loop_id)(struct scsi_qla_host *,
const uint16_t);
struct qla_tgt_sess *(*find_sess_by_s_id)(struct scsi_qla_host *,
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 2358c16..3d74f2f 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -237,7 +237,7 @@
struct tcm_qla2xxx_tpg, se_tpg);
struct tcm_qla2xxx_lport *lport = tpg->lport;
- return &lport->lport_name[0];
+ return lport->lport_naa_name;
}
static char *tcm_qla2xxx_npiv_get_fabric_wwn(struct se_portal_group *se_tpg)
@@ -1457,6 +1457,78 @@
return 0;
}
+static void tcm_qla2xxx_update_sess(struct qla_tgt_sess *sess, port_id_t s_id,
+ uint16_t loop_id, bool conf_compl_supported)
+{
+ struct qla_tgt *tgt = sess->tgt;
+ struct qla_hw_data *ha = tgt->ha;
+ struct tcm_qla2xxx_lport *lport = ha->tgt.target_lport_ptr;
+ struct se_node_acl *se_nacl = sess->se_sess->se_node_acl;
+ struct tcm_qla2xxx_nacl *nacl = container_of(se_nacl,
+ struct tcm_qla2xxx_nacl, se_node_acl);
+ u32 key;
+
+
+ if (sess->loop_id != loop_id || sess->s_id.b24 != s_id.b24)
+ pr_info("Updating session %p from port %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x loop_id %d -> %d s_id %x:%x:%x -> %x:%x:%x\n",
+ sess,
+ sess->port_name[0], sess->port_name[1],
+ sess->port_name[2], sess->port_name[3],
+ sess->port_name[4], sess->port_name[5],
+ sess->port_name[6], sess->port_name[7],
+ sess->loop_id, loop_id,
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa,
+ s_id.b.domain, s_id.b.area, s_id.b.al_pa);
+
+ if (sess->loop_id != loop_id) {
+ /*
+ * Because we can shuffle loop IDs around and we
+ * update different sessions non-atomically, we might
+ * have overwritten this session's old loop ID
+ * already, and we might end up overwriting some other
+ * session that will be updated later. So we have to
+ * be extra careful and we can't warn about those things...
+ */
+ if (lport->lport_loopid_map[sess->loop_id].se_nacl == se_nacl)
+ lport->lport_loopid_map[sess->loop_id].se_nacl = NULL;
+
+ lport->lport_loopid_map[loop_id].se_nacl = se_nacl;
+
+ sess->loop_id = loop_id;
+ }
+
+ if (sess->s_id.b24 != s_id.b24) {
+ key = (((u32) sess->s_id.b.domain << 16) |
+ ((u32) sess->s_id.b.area << 8) |
+ ((u32) sess->s_id.b.al_pa));
+
+ if (btree_lookup32(&lport->lport_fcport_map, key))
+ WARN(btree_remove32(&lport->lport_fcport_map, key) != se_nacl,
+ "Found wrong se_nacl when updating s_id %x:%x:%x\n",
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa);
+ else
+ WARN(1, "No lport_fcport_map entry for s_id %x:%x:%x\n",
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa);
+
+ key = (((u32) s_id.b.domain << 16) |
+ ((u32) s_id.b.area << 8) |
+ ((u32) s_id.b.al_pa));
+
+ if (btree_lookup32(&lport->lport_fcport_map, key)) {
+ WARN(1, "Already have lport_fcport_map entry for s_id %x:%x:%x\n",
+ s_id.b.domain, s_id.b.area, s_id.b.al_pa);
+ btree_update32(&lport->lport_fcport_map, key, se_nacl);
+ } else {
+ btree_insert32(&lport->lport_fcport_map, key, se_nacl, GFP_ATOMIC);
+ }
+
+ sess->s_id = s_id;
+ nacl->nport_id = key;
+ }
+
+ sess->conf_compl_supported = conf_compl_supported;
+}
+
/*
* Calls into tcm_qla2xxx used by qla2xxx LLD I/O path.
*/
@@ -1467,6 +1539,7 @@
.free_cmd = tcm_qla2xxx_free_cmd,
.free_mcmd = tcm_qla2xxx_free_mcmd,
.free_session = tcm_qla2xxx_free_session,
+ .update_sess = tcm_qla2xxx_update_sess,
.check_initiator_node_acl = tcm_qla2xxx_check_initiator_node_acl,
.find_sess_by_s_id = tcm_qla2xxx_find_sess_by_s_id,
.find_sess_by_loop_id = tcm_qla2xxx_find_sess_by_loop_id,
@@ -1534,6 +1607,7 @@
lport->lport_wwpn = wwpn;
tcm_qla2xxx_format_wwn(&lport->lport_name[0], TCM_QLA2XXX_NAMELEN,
wwpn);
+ sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) wwpn);
ret = tcm_qla2xxx_init_lport(lport);
if (ret != 0)
@@ -1601,6 +1675,7 @@
lport->lport_npiv_wwnn = npiv_wwnn;
tcm_qla2xxx_npiv_format_wwn(&lport->lport_npiv_name[0],
TCM_QLA2XXX_NAMELEN, npiv_wwpn, npiv_wwnn);
+ sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) npiv_wwpn);
/* FIXME: tcm_qla2xxx_npiv_make_lport */
ret = -ENOSYS;
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
index 8254981..9ba075f 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
@@ -61,6 +61,8 @@
u64 lport_npiv_wwnn;
/* ASCII formatted WWPN for FC Target Lport */
char lport_name[TCM_QLA2XXX_NAMELEN];
+ /* ASCII formatted naa WWPN for VPD page 83 etc */
+ char lport_naa_name[TCM_QLA2XXX_NAMELEN];
/* ASCII formatted WWPN+WWNN for NPIV FC Target Lport */
char lport_npiv_name[TCM_QLA2XXX_NPIV_NAMELEN];
/* map for fc_port pointers in 24-bit FC Port ID space */
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 868f8aa..a6e27d9 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -135,6 +135,12 @@
return 0;
}
+static int sbc_emulate_noop(struct se_cmd *cmd)
+{
+ target_complete_cmd(cmd, GOOD);
+ return 0;
+}
+
static inline u32 sbc_get_size(struct se_cmd *cmd, u32 sectors)
{
return cmd->se_dev->se_sub_dev->se_dev_attrib.block_size * sectors;
@@ -531,6 +537,18 @@
size = 0;
cmd->execute_cmd = sbc_emulate_verify;
break;
+ case REZERO_UNIT:
+ case SEEK_6:
+ case SEEK_10:
+ /*
+ * There are still clients out there which use these old SCSI-2
+ * commands. This mainly happens when running VMs with legacy
+ * guest systems, connected via SCSI command pass-through to
+ * iSCSI targets. Make them happy and return status GOOD.
+ */
+ size = 0;
+ cmd->execute_cmd = sbc_emulate_noop;
+ break;
default:
ret = spc_parse_cdb(cmd, &size);
if (ret)
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index c33baff..9097155 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1616,7 +1616,6 @@
se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST;
se_cmd->se_tfo->queue_tm_rsp(se_cmd);
- transport_generic_free_cmd(se_cmd, 0);
}
/**
