/*
 *  linux/include/asm-arm/arch-omap/irqs.h
 *
 *  Copyright (C) Greg Lonnon 2001
 *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
 *	 are different.
 */

#ifndef __ASM_ARCH_OMAP1510_IRQS_H
#define __ASM_ARCH_OMAP1510_IRQS_H

/*
 * IRQ numbers for interrupt handler 1
 *
 * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
 *
 */
#define INT_IH2_IRQ		0
#define INT_CAMERA		1
#define INT_FIQ			3
#define INT_RTDX		6
#define INT_DSP_MMU_ABORT	7
#define INT_HOST		8
#define INT_ABORT		9
#define INT_DSP_MAILBOX1	10
#define INT_DSP_MAILBOX2	11
#define INT_BRIDGE_PRIV		13
#define INT_GPIO_BANK1		14
#define INT_UART3		15
#define INT_TIMER3		16
#define INT_DMA_CH0_6		19
#define INT_DMA_CH1_7		20
#define INT_DMA_CH2_8		21
#define INT_DMA_CH3		22
#define INT_DMA_CH4		23
#define INT_DMA_CH5		24
#define INT_DMA_LCD		25
#define INT_TIMER1		26
#define INT_WD_TIMER		27
#define INT_BRIDGE_PUB		28
#define INT_TIMER2		30
#define INT_LCD_CTRL		31

/*
 * OMAP-1510 specific IRQ numbers for interrupt handler 1
 */
#define INT_1510_RES2		2
#define INT_1510_SPI_TX		4
#define INT_1510_SPI_RX		5
#define INT_1510_RES12		12
#define INT_1510_LB_MMU		17
#define INT_1510_RES18		18
#define INT_1510_LOCAL_BUS	29

/*
 * OMAP-1610 specific IRQ numbers for interrupt handler 1
 */
#define INT_1610_IH2_FIQ	2
#define INT_1610_McBSP2_TX	4
#define INT_1610_McBSP2_RX	5
#define INT_1610_LCD_LINE	12
#define INT_1610_GPTIMER1	17
#define INT_1610_GPTIMER2	18
#define INT_1610_SSR_FIFO_0	29

/*
 * OMAP-730 specific IRQ numbers for interrupt handler 1
 */
#define INT_730_IH2_FIQ		0
#define INT_730_IH2_IRQ		1
#define INT_730_USB_NON_ISO	2
#define INT_730_USB_ISO		3
#define INT_730_ICR		4
#define INT_730_EAC		5
#define INT_730_GPIO_BANK1	6
#define INT_730_GPIO_BANK2	7
#define INT_730_GPIO_BANK3	8
#define INT_730_McBSP2TX	10
#define INT_730_McBSP2RX	11
#define INT_730_McBSP2RX_OVF	12
#define INT_730_LCD_LINE	14
#define INT_730_GSM_PROTECT	15
#define INT_730_TIMER3		16
#define INT_730_GPIO_BANK5	17
#define INT_730_GPIO_BANK6	18
#define INT_730_SPGIO_WR	29

/*
 * IRQ numbers for interrupt handler 2
 *
 * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
 */
#define IH2_BASE		32

#define INT_KEYBOARD		(1 + IH2_BASE)
#define INT_uWireTX		(2 + IH2_BASE)
#define INT_uWireRX		(3 + IH2_BASE)
#define INT_I2C			(4 + IH2_BASE)
#define INT_MPUIO		(5 + IH2_BASE)
#define INT_USB_HHC_1		(6 + IH2_BASE)
#define INT_McBSP3TX		(10 + IH2_BASE)
#define INT_McBSP3RX		(11 + IH2_BASE)
#define INT_McBSP1TX		(12 + IH2_BASE)
#define INT_McBSP1RX		(13 + IH2_BASE)
#define INT_UART1		(14 + IH2_BASE)
#define INT_UART2		(15 + IH2_BASE)
#define INT_BT_MCSI1TX		(16 + IH2_BASE)
#define INT_BT_MCSI1RX		(17 + IH2_BASE)
#define INT_USB_W2FC		(20 + IH2_BASE)
#define INT_1WIRE		(21 + IH2_BASE)
#define INT_OS_TIMER		(22 + IH2_BASE)
#define INT_MMC			(23 + IH2_BASE)
#define INT_GAUGE_32K		(24 + IH2_BASE)
#define INT_RTC_TIMER		(25 + IH2_BASE)
#define INT_RTC_ALARM		(26 + IH2_BASE)
#define INT_MEM_STICK		(27 + IH2_BASE)
#define INT_DSP_MMU		(28 + IH2_BASE)

/*
 * OMAP-1510 specific IRQ numbers for interrupt handler 2
 */
#define INT_1510_OS_32kHz_TIMER (22 + IH2_BASE)
#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)

/*
 * OMAP-1610 specific IRQ numbers for interrupt handler 2
 */
#define INT_1610_FAC		(0 + IH2_BASE)
#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
#define INT_1610_USB_OTG	(8 + IH2_BASE)
#define INT_1610_SoSSI		(9 + IH2_BASE)
#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
#define INT_1610_STI		(32 + IH2_BASE)
#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
#define INT_1610_GPTIMER3	(34 + IH2_BASE)
#define INT_1610_GPTIMER4	(35 + IH2_BASE)
#define INT_1610_GPTIMER5	(36 + IH2_BASE)
#define INT_1610_GPTIMER6	(37 + IH2_BASE)
#define INT_1610_GPTIMER7	(38 + IH2_BASE)
#define INT_1610_GPTIMER8	(39 + IH2_BASE)
#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
#define INT_1610_MMC2		(42 + IH2_BASE)
#define INT_1610_CF		(43 + IH2_BASE)
#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
#define INT_1610_SPI		(49 + IH2_BASE)
#define INT_1610_DMA_CH6	(53 + IH2_BASE)
#define INT_1610_DMA_CH7	(54 + IH2_BASE)
#define INT_1610_DMA_CH8	(55 + IH2_BASE)
#define INT_1610_DMA_CH9	(56 + IH2_BASE)
#define INT_1610_DMA_CH10	(57 + IH2_BASE)
#define INT_1610_DMA_CH11	(58 + IH2_BASE)
#define INT_1610_DMA_CH12	(59 + IH2_BASE)
#define INT_1610_DMA_CH13	(60 + IH2_BASE)
#define INT_1610_DMA_CH14	(61 + IH2_BASE)
#define INT_1610_DMA_CH15	(62 + IH2_BASE)
#define INT_1610_NAND		(63 + IH2_BASE)

/*
 * OMAP-730 specific IRQ numbers for interrupt handler 2
 */
#define INT_730_HW_ERRORS	(0 + IH2_BASE)
#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
#define INT_730_CFCD		(2 + IH2_BASE)
#define INT_730_CFIREQ		(3 + IH2_BASE)
#define INT_730_I2C		(4 + IH2_BASE)
#define INT_730_PCC		(5 + IH2_BASE)
#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
#define INT_730_SPI_100K_1	(7 + IH2_BASE)
#define INT_730_SYREN_SPI	(8 + IH2_BASE)
#define INT_730_VLYNQ		(9 + IH2_BASE)
#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
#define INT_730_McBSP1TX	(11 + IH2_BASE)
#define INT_730_McBSP1RX	(12 + IH2_BASE)
#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
#define INT_730_MCSI		(16 + IH2_BASE)
#define INT_730_uWireTX		(17 + IH2_BASE)
#define INT_730_uWireRX		(18 + IH2_BASE)
#define INT_730_SMC_CD		(19 + IH2_BASE)
#define INT_730_SMC_IREQ	(20 + IH2_BASE)
#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
#define INT_730_TIMER32K	(22 + IH2_BASE)
#define INT_730_MMC_SDIO	(23 + IH2_BASE)
#define INT_730_UPLD		(24 + IH2_BASE)
#define INT_730_USB_HHC_1	(27 + IH2_BASE)
#define INT_730_USB_HHC_2	(28 + IH2_BASE)
#define INT_730_USB_GENI	(29 + IH2_BASE)
#define INT_730_USB_OTG		(30 + IH2_BASE)
#define INT_730_CAMERA_IF	(31 + IH2_BASE)
#define INT_730_RNG		(32 + IH2_BASE)
#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
#define INT_730_SHA1_MD5	(36 + IH2_BASE)
#define INT_730_SPI_100K_2	(37 + IH2_BASE)
#define INT_730_RNG_IDLE	(38 + IH2_BASE)
#define INT_730_MPUIO		(39 + IH2_BASE)
#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
#define INT_730_DMA_CH6		(53 + IH2_BASE)
#define INT_730_DMA_CH7		(54 + IH2_BASE)
#define INT_730_DMA_CH8		(55 + IH2_BASE)
#define INT_730_DMA_CH9		(56 + IH2_BASE)
#define INT_730_DMA_CH10	(57 + IH2_BASE)
#define INT_730_DMA_CH11	(58 + IH2_BASE)
#define INT_730_DMA_CH12	(59 + IH2_BASE)
#define INT_730_DMA_CH13	(60 + IH2_BASE)
#define INT_730_DMA_CH14	(61 + IH2_BASE)
#define INT_730_DMA_CH15	(62 + IH2_BASE)
#define INT_730_NAND		(63 + IH2_BASE)

/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
 * 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES	192
#define IH_GPIO_BASE		(128 + IH2_BASE)
#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
#define IH_BOARD_BASE		(16 + IH_MPUIO_BASE)

#ifndef __ASSEMBLY__
extern void omap_init_irq(void);
#endif

/*
 * The definition of NR_IRQS is in board-specific header file, which is
 * included via hardware.h
 */
#include <asm/arch/hardware.h>

#ifndef NR_IRQS
#define NR_IRQS                 IH_BOARD_BASE
#endif

#endif