/******************************************************************************
 *
 * Module Name: dsmethod - Parser/Interpreter interface - control method parsing
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2005, R. Byron Moore
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */


#include <acpi/acpi.h>
#include <acpi/acparser.h>
#include <acpi/amlcode.h>
#include <acpi/acdispat.h>
#include <acpi/acinterp.h>
#include <acpi/acnamesp.h>


#define _COMPONENT          ACPI_DISPATCHER
	 ACPI_MODULE_NAME    ("dsmethod")


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_parse_method
 *
 * PARAMETERS:  obj_handle      - Method node
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Call the parser and parse the AML that is associated with the
 *              method.
 *
 * MUTEX:       Assumes parser is locked
 *
 ******************************************************************************/

acpi_status
acpi_ds_parse_method (
	acpi_handle                     obj_handle)
{
	acpi_status                     status;
	union acpi_operand_object       *obj_desc;
	union acpi_parse_object         *op;
	struct acpi_namespace_node      *node;
	acpi_owner_id                   owner_id;
	struct acpi_walk_state          *walk_state;


	ACPI_FUNCTION_TRACE_PTR ("ds_parse_method", obj_handle);


	/* Parameter Validation */

	if (!obj_handle) {
		return_ACPI_STATUS (AE_NULL_ENTRY);
	}

	ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "**** Parsing [%4.4s] **** named_obj=%p\n",
		acpi_ut_get_node_name (obj_handle), obj_handle));

	/* Extract the method object from the method Node */

	node = (struct acpi_namespace_node *) obj_handle;
	obj_desc = acpi_ns_get_attached_object (node);
	if (!obj_desc) {
		return_ACPI_STATUS (AE_NULL_OBJECT);
	}

	/* Create a mutex for the method if there is a concurrency limit */

	if ((obj_desc->method.concurrency != ACPI_INFINITE_CONCURRENCY) &&
		(!obj_desc->method.semaphore)) {
		status = acpi_os_create_semaphore (obj_desc->method.concurrency,
				   obj_desc->method.concurrency,
				   &obj_desc->method.semaphore);
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}
	}

	/*
	 * Allocate a new parser op to be the root of the parsed
	 * method tree
	 */
	op = acpi_ps_alloc_op (AML_METHOD_OP);
	if (!op) {
		return_ACPI_STATUS (AE_NO_MEMORY);
	}

	/* Init new op with the method name and pointer back to the Node */

	acpi_ps_set_name (op, node->name.integer);
	op->common.node = node;

	/*
	 * Get a new owner_id for objects created by this method. Namespace
	 * objects (such as Operation Regions) can be created during the
	 * first pass parse.
	 */
	owner_id = acpi_ut_allocate_owner_id (ACPI_OWNER_TYPE_METHOD);
	obj_desc->method.owning_id = owner_id;

	/* Create and initialize a new walk state */

	walk_state = acpi_ds_create_walk_state (owner_id, NULL, NULL, NULL);
	if (!walk_state) {
		return_ACPI_STATUS (AE_NO_MEMORY);
	}

	status = acpi_ds_init_aml_walk (walk_state, op, node,
			  obj_desc->method.aml_start,
			  obj_desc->method.aml_length, NULL, 1);
	if (ACPI_FAILURE (status)) {
		acpi_ds_delete_walk_state (walk_state);
		return_ACPI_STATUS (status);
	}

	/*
	 * Parse the method, first pass
	 *
	 * The first pass load is where newly declared named objects are
	 * added into the namespace.  Actual evaluation of
	 * the named objects (what would be called a "second
	 * pass") happens during the actual execution of the
	 * method so that operands to the named objects can
	 * take on dynamic run-time values.
	 */
	status = acpi_ps_parse_aml (walk_state);
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
		"**** [%4.4s] Parsed **** named_obj=%p Op=%p\n",
		acpi_ut_get_node_name (obj_handle), obj_handle, op));

	acpi_ps_delete_parse_tree (op);
	return_ACPI_STATUS (status);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_begin_method_execution
 *
 * PARAMETERS:  method_node         - Node of the method
 *              obj_desc            - The method object
 *              calling_method_node - Caller of this method (if non-null)
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Prepare a method for execution.  Parses the method if necessary,
 *              increments the thread count, and waits at the method semaphore
 *              for clearance to execute.
 *
 ******************************************************************************/

acpi_status
acpi_ds_begin_method_execution (
	struct acpi_namespace_node      *method_node,
	union acpi_operand_object       *obj_desc,
	struct acpi_namespace_node      *calling_method_node)
{
	acpi_status                     status = AE_OK;


	ACPI_FUNCTION_TRACE_PTR ("ds_begin_method_execution", method_node);


	if (!method_node) {
		return_ACPI_STATUS (AE_NULL_ENTRY);
	}

	/*
	 * If there is a concurrency limit on this method, we need to
	 * obtain a unit from the method semaphore.
	 */
	if (obj_desc->method.semaphore) {
		/*
		 * Allow recursive method calls, up to the reentrancy/concurrency
		 * limit imposed by the SERIALIZED rule and the sync_level method
		 * parameter.
		 *
		 * The point of this code is to avoid permanently blocking a
		 * thread that is making recursive method calls.
		 */
		if (method_node == calling_method_node) {
			if (obj_desc->method.thread_count >= obj_desc->method.concurrency) {
				return_ACPI_STATUS (AE_AML_METHOD_LIMIT);
			}
		}

		/*
		 * Get a unit from the method semaphore. This releases the
		 * interpreter if we block
		 */
		status = acpi_ex_system_wait_semaphore (obj_desc->method.semaphore,
				 ACPI_WAIT_FOREVER);
	}

	/*
	 * Increment the method parse tree thread count since it has been
	 * reentered one more time (even if it is the same thread)
	 */
	obj_desc->method.thread_count++;
	return_ACPI_STATUS (status);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_call_control_method
 *
 * PARAMETERS:  Thread              - Info for this thread
 *              this_walk_state     - Current walk state
 *              Op                  - Current Op to be walked
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Transfer execution to a called control method
 *
 ******************************************************************************/

acpi_status
acpi_ds_call_control_method (
	struct acpi_thread_state        *thread,
	struct acpi_walk_state          *this_walk_state,
	union acpi_parse_object         *op)
{
	acpi_status                     status;
	struct acpi_namespace_node      *method_node;
	struct acpi_walk_state          *next_walk_state;
	union acpi_operand_object       *obj_desc;
	struct acpi_parameter_info      info;
	u32                             i;


	ACPI_FUNCTION_TRACE_PTR ("ds_call_control_method", this_walk_state);

	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Execute method %p, currentstate=%p\n",
		this_walk_state->prev_op, this_walk_state));

	/*
	 * Get the namespace entry for the control method we are about to call
	 */
	method_node = this_walk_state->method_call_node;
	if (!method_node) {
		return_ACPI_STATUS (AE_NULL_ENTRY);
	}

	obj_desc = acpi_ns_get_attached_object (method_node);
	if (!obj_desc) {
		return_ACPI_STATUS (AE_NULL_OBJECT);
	}

	obj_desc->method.owning_id = acpi_ut_allocate_owner_id (ACPI_OWNER_TYPE_METHOD);

	/* Init for new method, wait on concurrency semaphore */

	status = acpi_ds_begin_method_execution (method_node, obj_desc,
			  this_walk_state->method_node);
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	if (!(obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY)) {
		/* 1) Parse: Create a new walk state for the preempting walk */

		next_walk_state = acpi_ds_create_walk_state (obj_desc->method.owning_id,
				  op, obj_desc, NULL);
		if (!next_walk_state) {
			return_ACPI_STATUS (AE_NO_MEMORY);
		}

		/* Create and init a Root Node */

		op = acpi_ps_create_scope_op ();
		if (!op) {
			status = AE_NO_MEMORY;
			goto cleanup;
		}

		status = acpi_ds_init_aml_walk (next_walk_state, op, method_node,
				  obj_desc->method.aml_start, obj_desc->method.aml_length,
				  NULL, 1);
		if (ACPI_FAILURE (status)) {
			acpi_ds_delete_walk_state (next_walk_state);
			goto cleanup;
		}

		/* Begin AML parse */

		status = acpi_ps_parse_aml (next_walk_state);
		acpi_ps_delete_parse_tree (op);
	}

	/* 2) Execute: Create a new state for the preempting walk */

	next_walk_state = acpi_ds_create_walk_state (obj_desc->method.owning_id,
			  NULL, obj_desc, thread);
	if (!next_walk_state) {
		status = AE_NO_MEMORY;
		goto cleanup;
	}
	/*
	 * The resolved arguments were put on the previous walk state's operand
	 * stack.  Operands on the previous walk state stack always
	 * start at index 0.
	 * Null terminate the list of arguments
	 */
	this_walk_state->operands [this_walk_state->num_operands] = NULL;

	info.parameters = &this_walk_state->operands[0];
	info.parameter_type = ACPI_PARAM_ARGS;

	status = acpi_ds_init_aml_walk (next_walk_state, NULL, method_node,
			  obj_desc->method.aml_start, obj_desc->method.aml_length,
			  &info, 3);
	if (ACPI_FAILURE (status)) {
		goto cleanup;
	}

	/*
	 * Delete the operands on the previous walkstate operand stack
	 * (they were copied to new objects)
	 */
	for (i = 0; i < obj_desc->method.param_count; i++) {
		acpi_ut_remove_reference (this_walk_state->operands [i]);
		this_walk_state->operands [i] = NULL;
	}

	/* Clear the operand stack */

	this_walk_state->num_operands = 0;

	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
		"Starting nested execution, newstate=%p\n", next_walk_state));

	if (obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY) {
		status = obj_desc->method.implementation (next_walk_state);
		return_ACPI_STATUS (status);
	}

	return_ACPI_STATUS (AE_OK);


	/* On error, we must delete the new walk state */

cleanup:
	if (next_walk_state && (next_walk_state->method_desc)) {
		/* Decrement the thread count on the method parse tree */

	   next_walk_state->method_desc->method.thread_count--;
	}
	(void) acpi_ds_terminate_control_method (next_walk_state);
	acpi_ds_delete_walk_state (next_walk_state);
	return_ACPI_STATUS (status);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_restart_control_method
 *
 * PARAMETERS:  walk_state          - State for preempted method (caller)
 *              return_desc         - Return value from the called method
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Restart a method that was preempted by another (nested) method
 *              invocation.  Handle the return value (if any) from the callee.
 *
 ******************************************************************************/

acpi_status
acpi_ds_restart_control_method (
	struct acpi_walk_state          *walk_state,
	union acpi_operand_object       *return_desc)
{
	acpi_status                     status;


	ACPI_FUNCTION_TRACE_PTR ("ds_restart_control_method", walk_state);


	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
		"****Restart [%4.4s] Op %p return_value_from_callee %p\n",
		(char *) &walk_state->method_node->name, walk_state->method_call_op,
		return_desc));

	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
		"    return_from_this_method_used?=%X res_stack %p Walk %p\n",
		walk_state->return_used,
		walk_state->results, walk_state));

	/* Did the called method return a value? */

	if (return_desc) {
		/* Are we actually going to use the return value? */

		if (walk_state->return_used) {
			/* Save the return value from the previous method */

			status = acpi_ds_result_push (return_desc, walk_state);
			if (ACPI_FAILURE (status)) {
				acpi_ut_remove_reference (return_desc);
				return_ACPI_STATUS (status);
			}

			/*
			 * Save as THIS method's return value in case it is returned
			 * immediately to yet another method
			 */
			walk_state->return_desc = return_desc;
		}

		/*
		 * The following code is the
		 * optional support for a so-called "implicit return". Some AML code
		 * assumes that the last value of the method is "implicitly" returned
		 * to the caller. Just save the last result as the return value.
		 * NOTE: this is optional because the ASL language does not actually
		 * support this behavior.
		 */
		else if (!acpi_ds_do_implicit_return (return_desc, walk_state, FALSE)) {
			/*
			 * Delete the return value if it will not be used by the
			 * calling method
			 */
			acpi_ut_remove_reference (return_desc);
		}
	}

	return_ACPI_STATUS (AE_OK);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_terminate_control_method
 *
 * PARAMETERS:  walk_state          - State of the method
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Terminate a control method.  Delete everything that the method
 *              created, delete all locals and arguments, and delete the parse
 *              tree if requested.
 *
 ******************************************************************************/

acpi_status
acpi_ds_terminate_control_method (
	struct acpi_walk_state          *walk_state)
{
	union acpi_operand_object       *obj_desc;
	struct acpi_namespace_node      *method_node;
	acpi_status                     status;


	ACPI_FUNCTION_TRACE_PTR ("ds_terminate_control_method", walk_state);


	if (!walk_state) {
		return (AE_BAD_PARAMETER);
	}

	/* The current method object was saved in the walk state */

	obj_desc = walk_state->method_desc;
	if (!obj_desc) {
		return_ACPI_STATUS (AE_OK);
	}

	/* Delete all arguments and locals */

	acpi_ds_method_data_delete_all (walk_state);

	/*
	 * Lock the parser while we terminate this method.
	 * If this is the last thread executing the method,
	 * we have additional cleanup to perform
	 */
	status = acpi_ut_acquire_mutex (ACPI_MTX_PARSER);
	if (ACPI_FAILURE (status)) {
		return_ACPI_STATUS (status);
	}

	/* Signal completion of the execution of this method if necessary */

	if (walk_state->method_desc->method.semaphore) {
		status = acpi_os_signal_semaphore (
				  walk_state->method_desc->method.semaphore, 1);
		if (ACPI_FAILURE (status)) {
			ACPI_REPORT_ERROR (("Could not signal method semaphore\n"));
			status = AE_OK;

			/* Ignore error and continue cleanup */
		}
	}

	if (walk_state->method_desc->method.thread_count) {
		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
			"*** Not deleting method namespace, there are still %d threads\n",
			walk_state->method_desc->method.thread_count));
	}

	if (!walk_state->method_desc->method.thread_count) {
		/*
		 * Support to dynamically change a method from not_serialized to
		 * Serialized if it appears that the method is written foolishly and
		 * does not support multiple thread execution.  The best example of this
		 * is if such a method creates namespace objects and blocks.  A second
		 * thread will fail with an AE_ALREADY_EXISTS exception
		 *
		 * This code is here because we must wait until the last thread exits
		 * before creating the synchronization semaphore.
		 */
		if ((walk_state->method_desc->method.concurrency == 1) &&
			(!walk_state->method_desc->method.semaphore)) {
			status = acpi_os_create_semaphore (1,
					 1,
					 &walk_state->method_desc->method.semaphore);
		}

		/*
		 * There are no more threads executing this method.  Perform
		 * additional cleanup.
		 *
		 * The method Node is stored in the walk state
		 */
		method_node = walk_state->method_node;

		/*
		 * Delete any namespace entries created immediately underneath
		 * the method
		 */
		status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}

		if (method_node->child) {
			acpi_ns_delete_namespace_subtree (method_node);
		}

		/*
		 * Delete any namespace entries created anywhere else within
		 * the namespace
		 */
		acpi_ns_delete_namespace_by_owner (walk_state->method_desc->method.owning_id);
		status = acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}
	}

	status = acpi_ut_release_mutex (ACPI_MTX_PARSER);
	return_ACPI_STATUS (status);
}