/*
 * arch/v850/kernel/irq.c -- High-level interrupt handling
 *
 *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
 *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
 *  Copyright (C) 1994-2000  Ralf Baechle
 *  Copyright (C) 1992  Linus Torvalds
 *
 * This file is subject to the terms and conditions of the GNU General
 * Public License.  See the file COPYING in the main directory of this
 * archive for more details.
 *
 * This file was was derived from the mips version, arch/mips/kernel/irq.c
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/seq_file.h>

#include <asm/system.h>

/*
 * Controller mappings for all interrupt sources:
 */
irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
	[0 ... NR_IRQS-1] = {
		.handler = &no_irq_type,
		.lock = SPIN_LOCK_UNLOCKED
	}
};

/*
 * Special irq handlers.
 */

irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs)
{
	return IRQ_NONE;
}

/*
 * Generic no controller code
 */

static void enable_none(unsigned int irq) { }
static unsigned int startup_none(unsigned int irq) { return 0; }
static void disable_none(unsigned int irq) { }
static void ack_none(unsigned int irq)
{
	/*
	 * 'what should we do if we get a hw irq event on an illegal vector'.
	 * each architecture has to answer this themselves, it doesn't deserve
	 * a generic callback i think.
	 */
	printk("received IRQ %d with unknown interrupt type\n", irq);
}

/* startup is the same as "enable", shutdown is same as "disable" */
#define shutdown_none	disable_none
#define end_none	enable_none

struct hw_interrupt_type no_irq_type = {
	"none",
	startup_none,
	shutdown_none,
	enable_none,
	disable_none,
	ack_none,
	end_none
};

volatile unsigned long irq_err_count, spurious_count;

/*
 * Generic, controller-independent functions:
 */

int show_interrupts(struct seq_file *p, void *v)
{
	int i = *(loff_t *) v;
	struct irqaction * action;
	unsigned long flags;

	if (i == 0) {
		seq_puts(p, "           ");
		for (i=0; i < 1 /*smp_num_cpus*/; i++)
			seq_printf(p, "CPU%d       ", i);
		seq_putc(p, '\n');
	}

	if (i < NR_IRQS) {
		int j, count, num;
		const char *type_name = irq_desc[i].handler->typename;
		spin_lock_irqsave(&irq_desc[j].lock, flags);
		action = irq_desc[i].action;
		if (!action) 
			goto skip;

		count = 0;
		num = -1;
		for (j = 0; j < NR_IRQS; j++)
			if (irq_desc[j].handler->typename == type_name) {
				if (i == j)
					num = count;
				count++;
			}

		seq_printf(p, "%3d: ",i);
		seq_printf(p, "%10u ", kstat_irqs(i));
		if (count > 1) {
			int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
			seq_printf(p, " %*s%d", 14 - prec, type_name, num);
		} else
			seq_printf(p, " %14s", type_name);
		
		seq_printf(p, "  %s", action->name);
		for (action=action->next; action; action = action->next)
			seq_printf(p, ", %s", action->name);
		seq_putc(p, '\n');
skip:
		spin_unlock_irqrestore(&irq_desc[j].lock, flags);
	} else if (i == NR_IRQS)
		seq_printf(p, "ERR: %10lu\n", irq_err_count);
	return 0;
}

/*
 * This should really return information about whether
 * we should do bottom half handling etc. Right now we
 * end up _always_ checking the bottom half, which is a
 * waste of time and is not what some drivers would
 * prefer.
 */
int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action)
{
	int status = 1; /* Force the "do bottom halves" bit */
	int ret;

	if (!(action->flags & SA_INTERRUPT))
		local_irq_enable();

	do {
		ret = action->handler(irq, action->dev_id, regs);
		if (ret == IRQ_HANDLED)
			status |= action->flags;
		action = action->next;
	} while (action);
	if (status & SA_SAMPLE_RANDOM)
		add_interrupt_randomness(irq);
	local_irq_disable();

	return status;
}

/*
 * Generic enable/disable code: this just calls
 * down into the PIC-specific version for the actual
 * hardware disable after having gotten the irq
 * controller lock. 
 */
 
/**
 *	disable_irq_nosync - disable an irq without waiting
 *	@irq: Interrupt to disable
 *
 *	Disable the selected interrupt line. Disables of an interrupt
 *	stack. Unlike disable_irq(), this function does not ensure existing
 *	instances of the IRQ handler have completed before returning.
 *
 *	This function may be called from IRQ context.
 */
 
void inline disable_irq_nosync(unsigned int irq)
{
	irq_desc_t *desc = irq_desc + irq;
	unsigned long flags;

	spin_lock_irqsave(&desc->lock, flags);
	if (!desc->depth++) {
		desc->status |= IRQ_DISABLED;
		desc->handler->disable(irq);
	}
	spin_unlock_irqrestore(&desc->lock, flags);
}

/**
 *	disable_irq - disable an irq and wait for completion
 *	@irq: Interrupt to disable
 *
 *	Disable the selected interrupt line. Disables of an interrupt
 *	stack. That is for two disables you need two enables. This
 *	function waits for any pending IRQ handlers for this interrupt
 *	to complete before returning. If you use this function while
 *	holding a resource the IRQ handler may need you will deadlock.
 *
 *	This function may be called - with care - from IRQ context.
 */
 
void disable_irq(unsigned int irq)
{
	disable_irq_nosync(irq);
	synchronize_irq(irq);
}

/**
 *	enable_irq - enable interrupt handling on an irq
 *	@irq: Interrupt to enable
 *
 *	Re-enables the processing of interrupts on this IRQ line
 *	providing no disable_irq calls are now in effect.
 *
 *	This function may be called from IRQ context.
 */
 
void enable_irq(unsigned int irq)
{
	irq_desc_t *desc = irq_desc + irq;
	unsigned long flags;

	spin_lock_irqsave(&desc->lock, flags);
	switch (desc->depth) {
	case 1: {
		unsigned int status = desc->status & ~IRQ_DISABLED;
		desc->status = status;
		if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
			desc->status = status | IRQ_REPLAY;
			hw_resend_irq(desc->handler,irq);
		}
		desc->handler->enable(irq);
		/* fall-through */
	}
	default:
		desc->depth--;
		break;
	case 0:
		printk("enable_irq(%u) unbalanced from %p\n", irq,
		       __builtin_return_address(0));
	}
	spin_unlock_irqrestore(&desc->lock, flags);
}

/* Handle interrupt IRQ.  REGS are the registers at the time of ther
   interrupt.  */
unsigned int handle_irq (int irq, struct pt_regs *regs)
{
	/* 
	 * We ack quickly, we don't want the irq controller
	 * thinking we're snobs just because some other CPU has
	 * disabled global interrupts (we have already done the
	 * INT_ACK cycles, it's too late to try to pretend to the
	 * controller that we aren't taking the interrupt).
	 *
	 * 0 return value means that this irq is already being
	 * handled by some other CPU. (or is disabled)
	 */
	int cpu = smp_processor_id();
	irq_desc_t *desc = irq_desc + irq;
	struct irqaction * action;
	unsigned int status;

	irq_enter();
	kstat_cpu(cpu).irqs[irq]++;
	spin_lock(&desc->lock);
	desc->handler->ack(irq);
	/*
	   REPLAY is when Linux resends an IRQ that was dropped earlier
	   WAITING is used by probe to mark irqs that are being tested
	   */
	status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
	status |= IRQ_PENDING; /* we _want_ to handle it */

	/*
	 * If the IRQ is disabled for whatever reason, we cannot
	 * use the action we have.
	 */
	action = NULL;
	if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
		action = desc->action;
		status &= ~IRQ_PENDING; /* we commit to handling */
		status |= IRQ_INPROGRESS; /* we are handling it */
	}
	desc->status = status;

	/*
	 * If there is no IRQ handler or it was disabled, exit early.
	   Since we set PENDING, if another processor is handling
	   a different instance of this same irq, the other processor
	   will take care of it.
	 */
	if (unlikely(!action))
		goto out;

	/*
	 * Edge triggered interrupts need to remember
	 * pending events.
	 * This applies to any hw interrupts that allow a second
	 * instance of the same irq to arrive while we are in handle_irq
	 * or in the handler. But the code here only handles the _second_
	 * instance of the irq, not the third or fourth. So it is mostly
	 * useful for irq hardware that does not mask cleanly in an
	 * SMP environment.
	 */
	for (;;) {
		spin_unlock(&desc->lock);
		handle_IRQ_event(irq, regs, action);
		spin_lock(&desc->lock);
		
		if (likely(!(desc->status & IRQ_PENDING)))
			break;
		desc->status &= ~IRQ_PENDING;
	}
	desc->status &= ~IRQ_INPROGRESS;

out:
	/*
	 * The ->end() handler has to deal with interrupts which got
	 * disabled while the handler was running.
	 */
	desc->handler->end(irq);
	spin_unlock(&desc->lock);

	irq_exit();

	return 1;
}

/**
 *	request_irq - allocate an interrupt line
 *	@irq: Interrupt line to allocate
 *	@handler: Function to be called when the IRQ occurs
 *	@irqflags: Interrupt type flags
 *	@devname: An ascii name for the claiming device
 *	@dev_id: A cookie passed back to the handler function
 *
 *	This call allocates interrupt resources and enables the
 *	interrupt line and IRQ handling. From the point this
 *	call is made your handler function may be invoked. Since
 *	your handler function must clear any interrupt the board 
 *	raises, you must take care both to initialise your hardware
 *	and to set up the interrupt handler in the right order.
 *
 *	Dev_id must be globally unique. Normally the address of the
 *	device data structure is used as the cookie. Since the handler
 *	receives this value it makes sense to use it.
 *
 *	If your interrupt is shared you must pass a non NULL dev_id
 *	as this is required when freeing the interrupt.
 *
 *	Flags:
 *
 *	SA_SHIRQ		Interrupt is shared
 *
 *	SA_INTERRUPT		Disable local interrupts while processing
 *
 *	SA_SAMPLE_RANDOM	The interrupt can be used for entropy
 *
 */
 
int request_irq(unsigned int irq, 
		irqreturn_t (*handler)(int, void *, struct pt_regs *),
		unsigned long irqflags, 
		const char * devname,
		void *dev_id)
{
	int retval;
	struct irqaction * action;

#if 1
	/*
	 * Sanity-check: shared interrupts should REALLY pass in
	 * a real dev-ID, otherwise we'll have trouble later trying
	 * to figure out which interrupt is which (messes up the
	 * interrupt freeing logic etc).
	 */
	if (irqflags & SA_SHIRQ) {
		if (!dev_id)
			printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]);
	}
#endif

	if (irq >= NR_IRQS)
		return -EINVAL;
	if (!handler)
		return -EINVAL;

	action = (struct irqaction *)
			kmalloc(sizeof(struct irqaction), GFP_KERNEL);
	if (!action)
		return -ENOMEM;

	action->handler = handler;
	action->flags = irqflags;
	cpus_clear(action->mask);
	action->name = devname;
	action->next = NULL;
	action->dev_id = dev_id;

	retval = setup_irq(irq, action);
	if (retval)
		kfree(action);
	return retval;
}

EXPORT_SYMBOL(request_irq);

/**
 *	free_irq - free an interrupt
 *	@irq: Interrupt line to free
 *	@dev_id: Device identity to free
 *
 *	Remove an interrupt handler. The handler is removed and if the
 *	interrupt line is no longer in use by any driver it is disabled.
 *	On a shared IRQ the caller must ensure the interrupt is disabled
 *	on the card it drives before calling this function. The function
 *	does not return until any executing interrupts for this IRQ
 *	have completed.
 *
 *	This function may be called from interrupt context. 
 *
 *	Bugs: Attempting to free an irq in a handler for the same irq hangs
 *	      the machine.
 */
 
void free_irq(unsigned int irq, void *dev_id)
{
	irq_desc_t *desc;
	struct irqaction **p;
	unsigned long flags;

	if (irq >= NR_IRQS)
		return;

	desc = irq_desc + irq;
	spin_lock_irqsave(&desc->lock,flags);
	p = &desc->action;
	for (;;) {
		struct irqaction * action = *p;
		if (action) {
			struct irqaction **pp = p;
			p = &action->next;
			if (action->dev_id != dev_id)
				continue;

			/* Found it - now remove it from the list of entries */
			*pp = action->next;
			if (!desc->action) {
				desc->status |= IRQ_DISABLED;
				desc->handler->shutdown(irq);
			}
			spin_unlock_irqrestore(&desc->lock,flags);

			synchronize_irq(irq);
			kfree(action);
			return;
		}
		printk("Trying to free free IRQ%d\n",irq);
		spin_unlock_irqrestore(&desc->lock,flags);
		return;
	}
}

EXPORT_SYMBOL(free_irq);

/*
 * IRQ autodetection code..
 *
 * This depends on the fact that any interrupt that
 * comes in on to an unassigned handler will get stuck
 * with "IRQ_WAITING" cleared and the interrupt
 * disabled.
 */

static DECLARE_MUTEX(probe_sem);

/**
 *	probe_irq_on	- begin an interrupt autodetect
 *
 *	Commence probing for an interrupt. The interrupts are scanned
 *	and a mask of potential interrupt lines is returned.
 *
 */
 
unsigned long probe_irq_on(void)
{
	unsigned int i;
	irq_desc_t *desc;
	unsigned long val;
	unsigned long delay;

	down(&probe_sem);
	/* 
	 * something may have generated an irq long ago and we want to
	 * flush such a longstanding irq before considering it as spurious. 
	 */
	for (i = NR_IRQS-1; i > 0; i--)  {
		desc = irq_desc + i;

		spin_lock_irq(&desc->lock);
		if (!irq_desc[i].action) 
			irq_desc[i].handler->startup(i);
		spin_unlock_irq(&desc->lock);
	}

	/* Wait for longstanding interrupts to trigger. */
	for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
		/* about 20ms delay */ barrier();

	/*
	 * enable any unassigned irqs
	 * (we must startup again here because if a longstanding irq
	 * happened in the previous stage, it may have masked itself)
	 */
	for (i = NR_IRQS-1; i > 0; i--) {
		desc = irq_desc + i;

		spin_lock_irq(&desc->lock);
		if (!desc->action) {
			desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
			if (desc->handler->startup(i))
				desc->status |= IRQ_PENDING;
		}
		spin_unlock_irq(&desc->lock);
	}

	/*
	 * Wait for spurious interrupts to trigger
	 */
	for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
		/* about 100ms delay */ barrier();

	/*
	 * Now filter out any obviously spurious interrupts
	 */
	val = 0;
	for (i = 0; i < NR_IRQS; i++) {
		irq_desc_t *desc = irq_desc + i;
		unsigned int status;

		spin_lock_irq(&desc->lock);
		status = desc->status;

		if (status & IRQ_AUTODETECT) {
			/* It triggered already - consider it spurious. */
			if (!(status & IRQ_WAITING)) {
				desc->status = status & ~IRQ_AUTODETECT;
				desc->handler->shutdown(i);
			} else
				if (i < 32)
					val |= 1 << i;
		}
		spin_unlock_irq(&desc->lock);
	}

	return val;
}

EXPORT_SYMBOL(probe_irq_on);

/*
 * Return a mask of triggered interrupts (this
 * can handle only legacy ISA interrupts).
 */
 
/**
 *	probe_irq_mask - scan a bitmap of interrupt lines
 *	@val:	mask of interrupts to consider
 *
 *	Scan the ISA bus interrupt lines and return a bitmap of
 *	active interrupts. The interrupt probe logic state is then
 *	returned to its previous value.
 *
 *	Note: we need to scan all the irq's even though we will
 *	only return ISA irq numbers - just so that we reset them
 *	all to a known state.
 */
unsigned int probe_irq_mask(unsigned long val)
{
	int i;
	unsigned int mask;

	mask = 0;
	for (i = 0; i < NR_IRQS; i++) {
		irq_desc_t *desc = irq_desc + i;
		unsigned int status;

		spin_lock_irq(&desc->lock);
		status = desc->status;

		if (status & IRQ_AUTODETECT) {
			if (i < 16 && !(status & IRQ_WAITING))
				mask |= 1 << i;

			desc->status = status & ~IRQ_AUTODETECT;
			desc->handler->shutdown(i);
		}
		spin_unlock_irq(&desc->lock);
	}
	up(&probe_sem);

	return mask & val;
}

/*
 * Return the one interrupt that triggered (this can
 * handle any interrupt source).
 */

/**
 *	probe_irq_off	- end an interrupt autodetect
 *	@val: mask of potential interrupts (unused)
 *
 *	Scans the unused interrupt lines and returns the line which
 *	appears to have triggered the interrupt. If no interrupt was
 *	found then zero is returned. If more than one interrupt is
 *	found then minus the first candidate is returned to indicate
 *	their is doubt.
 *
 *	The interrupt probe logic state is returned to its previous
 *	value.
 *
 *	BUGS: When used in a module (which arguably shouldnt happen)
 *	nothing prevents two IRQ probe callers from overlapping. The
 *	results of this are non-optimal.
 */
 
int probe_irq_off(unsigned long val)
{
	int i, irq_found, nr_irqs;

	nr_irqs = 0;
	irq_found = 0;
	for (i = 0; i < NR_IRQS; i++) {
		irq_desc_t *desc = irq_desc + i;
		unsigned int status;

		spin_lock_irq(&desc->lock);
		status = desc->status;

		if (status & IRQ_AUTODETECT) {
			if (!(status & IRQ_WAITING)) {
				if (!nr_irqs)
					irq_found = i;
				nr_irqs++;
			}
			desc->status = status & ~IRQ_AUTODETECT;
			desc->handler->shutdown(i);
		}
		spin_unlock_irq(&desc->lock);
	}
	up(&probe_sem);

	if (nr_irqs > 1)
		irq_found = -irq_found;
	return irq_found;
}

EXPORT_SYMBOL(probe_irq_off);

/* this was setup_x86_irq but it seems pretty generic */
int setup_irq(unsigned int irq, struct irqaction * new)
{
	int shared = 0;
	unsigned long flags;
	struct irqaction *old, **p;
	irq_desc_t *desc = irq_desc + irq;

	/*
	 * Some drivers like serial.c use request_irq() heavily,
	 * so we have to be careful not to interfere with a
	 * running system.
	 */
	if (new->flags & SA_SAMPLE_RANDOM) {
		/*
		 * This function might sleep, we want to call it first,
		 * outside of the atomic block.
		 * Yes, this might clear the entropy pool if the wrong
		 * driver is attempted to be loaded, without actually
		 * installing a new handler, but is this really a problem,
		 * only the sysadmin is able to do this.
		 */
		rand_initialize_irq(irq);
	}

	/*
	 * The following block of code has to be executed atomically
	 */
	spin_lock_irqsave(&desc->lock,flags);
	p = &desc->action;
	if ((old = *p) != NULL) {
		/* Can't share interrupts unless both agree to */
		if (!(old->flags & new->flags & SA_SHIRQ)) {
			spin_unlock_irqrestore(&desc->lock,flags);
			return -EBUSY;
		}

		/* add new interrupt at end of irq queue */
		do {
			p = &old->next;
			old = *p;
		} while (old);
		shared = 1;
	}

	*p = new;

	if (!shared) {
		desc->depth = 0;
		desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
		desc->handler->startup(irq);
	}
	spin_unlock_irqrestore(&desc->lock,flags);

	/* register_irq_proc(irq); */
	return 0;
}

/* Initialize irq handling for IRQs.
   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
void __init
init_irq_handlers (int base_irq, int num, int interval,
		   struct hw_interrupt_type *irq_type)
{
	while (num-- > 0) {
		irq_desc[base_irq].status  = IRQ_DISABLED;
		irq_desc[base_irq].action  = NULL;
		irq_desc[base_irq].depth   = 1;
		irq_desc[base_irq].handler = irq_type;
		base_irq += interval;
	}
}

#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
void init_irq_proc(void)
{
}
#endif /* CONFIG_PROC_FS && CONFIG_SYSCTL */