Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-ppc/8253pit.h b/include/asm-ppc/8253pit.h
new file mode 100644
index 0000000..285f784
--- /dev/null
+++ b/include/asm-ppc/8253pit.h
@@ -0,0 +1,10 @@
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#ifndef _8253PIT_H
+#define _8253PIT_H
+
+#define PIT_TICK_RATE 1193182UL
+
+#endif
diff --git a/include/asm-ppc/8xx_immap.h b/include/asm-ppc/8xx_immap.h
new file mode 100644
index 0000000..1311cef
--- /dev/null
+++ b/include/asm-ppc/8xx_immap.h
@@ -0,0 +1,564 @@
+/*
+ * MPC8xx Internal Memory Map
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * The I/O on the MPC860 is comprised of blocks of special registers
+ * and the dual port ram for the Communication Processor Module.
+ * Within this space are functional units such as the SIU, memory
+ * controller, system timers, and other control functions. It is
+ * a combination that I found difficult to separate into logical
+ * functional files.....but anyone else is welcome to try. -- Dan
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_8XX__
+#define __IMMAP_8XX__
+
+/* System configuration registers.
+*/
+typedef struct sys_conf {
+ uint sc_siumcr;
+ uint sc_sypcr;
+ uint sc_swt;
+ char res1[2];
+ ushort sc_swsr;
+ uint sc_sipend;
+ uint sc_simask;
+ uint sc_siel;
+ uint sc_sivec;
+ uint sc_tesr;
+ char res2[0xc];
+ uint sc_sdcr;
+ char res3[0x4c];
+} sysconf8xx_t;
+
+/* PCMCIA configuration registers.
+*/
+typedef struct pcmcia_conf {
+ uint pcmc_pbr0;
+ uint pcmc_por0;
+ uint pcmc_pbr1;
+ uint pcmc_por1;
+ uint pcmc_pbr2;
+ uint pcmc_por2;
+ uint pcmc_pbr3;
+ uint pcmc_por3;
+ uint pcmc_pbr4;
+ uint pcmc_por4;
+ uint pcmc_pbr5;
+ uint pcmc_por5;
+ uint pcmc_pbr6;
+ uint pcmc_por6;
+ uint pcmc_pbr7;
+ uint pcmc_por7;
+ char res1[0x20];
+ uint pcmc_pgcra;
+ uint pcmc_pgcrb;
+ uint pcmc_pscr;
+ char res2[4];
+ uint pcmc_pipr;
+ char res3[4];
+ uint pcmc_per;
+ char res4[4];
+} pcmconf8xx_t;
+
+/* Memory controller registers.
+*/
+typedef struct mem_ctlr {
+ uint memc_br0;
+ uint memc_or0;
+ uint memc_br1;
+ uint memc_or1;
+ uint memc_br2;
+ uint memc_or2;
+ uint memc_br3;
+ uint memc_or3;
+ uint memc_br4;
+ uint memc_or4;
+ uint memc_br5;
+ uint memc_or5;
+ uint memc_br6;
+ uint memc_or6;
+ uint memc_br7;
+ uint memc_or7;
+ char res1[0x24];
+ uint memc_mar;
+ uint memc_mcr;
+ char res2[4];
+ uint memc_mamr;
+ uint memc_mbmr;
+ ushort memc_mstat;
+ ushort memc_mptpr;
+ uint memc_mdr;
+ char res3[0x80];
+} memctl8xx_t;
+
+/*-----------------------------------------------------------------------
+ * BR - Memory Controler: Base Register 16-9
+ */
+#define BR_BA_MSK 0xffff8000 /* Base Address Mask */
+#define BR_AT_MSK 0x00007000 /* Address Type Mask */
+#define BR_PS_MSK 0x00000c00 /* Port Size Mask */
+#define BR_PS_32 0x00000000 /* 32 bit port size */
+#define BR_PS_16 0x00000800 /* 16 bit port size */
+#define BR_PS_8 0x00000400 /* 8 bit port size */
+#define BR_PARE 0x00000200 /* Parity Enable */
+#define BR_WP 0x00000100 /* Write Protect */
+#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */
+#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */
+#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */
+#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */
+#define BR_V 0x00000001 /* Bank Valid */
+
+/*-----------------------------------------------------------------------
+ * OR - Memory Controler: Option Register 16-11
+ */
+#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */
+#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */
+#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */
+ /* Address Multiplex */
+#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */
+#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */
+#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */
+#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */
+#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */
+#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/
+#define OR_BI 0x00000100 /* Burst inhibit */
+#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */
+#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */
+#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */
+#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */
+#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */
+#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */
+#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */
+#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */
+#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */
+#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */
+#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */
+#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */
+#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */
+#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */
+#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */
+#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */
+#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */
+#define OR_SETA 0x00000008 /* External Transfer Acknowledge */
+#define OR_TRLX 0x00000004 /* Timing Relaxed */
+#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */
+
+/* System Integration Timers.
+*/
+typedef struct sys_int_timers {
+ ushort sit_tbscr;
+ char res0[0x02];
+ uint sit_tbreff0;
+ uint sit_tbreff1;
+ char res1[0x14];
+ ushort sit_rtcsc;
+ char res2[0x02];
+ uint sit_rtc;
+ uint sit_rtsec;
+ uint sit_rtcal;
+ char res3[0x10];
+ ushort sit_piscr;
+ char res4[2];
+ uint sit_pitc;
+ uint sit_pitr;
+ char res5[0x34];
+} sit8xx_t;
+
+#define TBSCR_TBIRQ_MASK ((ushort)0xff00)
+#define TBSCR_REFA ((ushort)0x0080)
+#define TBSCR_REFB ((ushort)0x0040)
+#define TBSCR_REFAE ((ushort)0x0008)
+#define TBSCR_REFBE ((ushort)0x0004)
+#define TBSCR_TBF ((ushort)0x0002)
+#define TBSCR_TBE ((ushort)0x0001)
+
+#define RTCSC_RTCIRQ_MASK ((ushort)0xff00)
+#define RTCSC_SEC ((ushort)0x0080)
+#define RTCSC_ALR ((ushort)0x0040)
+#define RTCSC_38K ((ushort)0x0010)
+#define RTCSC_SIE ((ushort)0x0008)
+#define RTCSC_ALE ((ushort)0x0004)
+#define RTCSC_RTF ((ushort)0x0002)
+#define RTCSC_RTE ((ushort)0x0001)
+
+#define PISCR_PIRQ_MASK ((ushort)0xff00)
+#define PISCR_PS ((ushort)0x0080)
+#define PISCR_PIE ((ushort)0x0004)
+#define PISCR_PTF ((ushort)0x0002)
+#define PISCR_PTE ((ushort)0x0001)
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+ uint car_sccr;
+ uint car_plprcr;
+ uint car_rsr;
+ char res[0x74]; /* Reserved area */
+} car8xx_t;
+
+/* System Integration Timers keys.
+*/
+typedef struct sitk {
+ uint sitk_tbscrk;
+ uint sitk_tbreff0k;
+ uint sitk_tbreff1k;
+ uint sitk_tbk;
+ char res1[0x10];
+ uint sitk_rtcsck;
+ uint sitk_rtck;
+ uint sitk_rtseck;
+ uint sitk_rtcalk;
+ char res2[0x10];
+ uint sitk_piscrk;
+ uint sitk_pitck;
+ char res3[0x38];
+} sitk8xx_t;
+
+/* Clocks and reset keys.
+*/
+typedef struct cark {
+ uint cark_sccrk;
+ uint cark_plprcrk;
+ uint cark_rsrk;
+ char res[0x474];
+} cark8xx_t;
+
+/* The key to unlock registers maintained by keep-alive power.
+*/
+#define KAPWR_KEY ((unsigned int)0x55ccaa33)
+
+/* Video interface. MPC823 Only.
+*/
+typedef struct vid823 {
+ ushort vid_vccr;
+ ushort res1;
+ u_char vid_vsr;
+ u_char res2;
+ u_char vid_vcmr;
+ u_char res3;
+ uint vid_vbcb;
+ uint res4;
+ uint vid_vfcr0;
+ uint vid_vfaa0;
+ uint vid_vfba0;
+ uint vid_vfcr1;
+ uint vid_vfaa1;
+ uint vid_vfba1;
+ u_char res5[0x18];
+} vid823_t;
+
+/* LCD interface. 823 Only.
+*/
+typedef struct lcd {
+ uint lcd_lccr;
+ uint lcd_lchcr;
+ uint lcd_lcvcr;
+ char res1[4];
+ uint lcd_lcfaa;
+ uint lcd_lcfba;
+ char lcd_lcsr;
+ char res2[0x7];
+} lcd823_t;
+
+/* I2C
+*/
+typedef struct i2c {
+ u_char i2c_i2mod;
+ char res1[3];
+ u_char i2c_i2add;
+ char res2[3];
+ u_char i2c_i2brg;
+ char res3[3];
+ u_char i2c_i2com;
+ char res4[3];
+ u_char i2c_i2cer;
+ char res5[3];
+ u_char i2c_i2cmr;
+ char res6[0x8b];
+} i2c8xx_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+ char res1[4];
+ uint sdma_sdar;
+ u_char sdma_sdsr;
+ char res3[3];
+ u_char sdma_sdmr;
+ char res4[3];
+ u_char sdma_idsr1;
+ char res5[3];
+ u_char sdma_idmr1;
+ char res6[3];
+ u_char sdma_idsr2;
+ char res7[3];
+ u_char sdma_idmr2;
+ char res8[0x13];
+} sdma8xx_t;
+
+/* Communication Processor Module Interrupt Controller.
+*/
+typedef struct cpm_ic {
+ ushort cpic_civr;
+ char res[0xe];
+ uint cpic_cicr;
+ uint cpic_cipr;
+ uint cpic_cimr;
+ uint cpic_cisr;
+} cpic8xx_t;
+
+/* Input/Output Port control/status registers.
+*/
+typedef struct io_port {
+ ushort iop_padir;
+ ushort iop_papar;
+ ushort iop_paodr;
+ ushort iop_padat;
+ char res1[8];
+ ushort iop_pcdir;
+ ushort iop_pcpar;
+ ushort iop_pcso;
+ ushort iop_pcdat;
+ ushort iop_pcint;
+ char res2[6];
+ ushort iop_pddir;
+ ushort iop_pdpar;
+ char res3[2];
+ ushort iop_pddat;
+ uint utmode;
+ char res4[4];
+} iop8xx_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+ ushort cpmt_tgcr;
+ char res1[0xe];
+ ushort cpmt_tmr1;
+ ushort cpmt_tmr2;
+ ushort cpmt_trr1;
+ ushort cpmt_trr2;
+ ushort cpmt_tcr1;
+ ushort cpmt_tcr2;
+ ushort cpmt_tcn1;
+ ushort cpmt_tcn2;
+ ushort cpmt_tmr3;
+ ushort cpmt_tmr4;
+ ushort cpmt_trr3;
+ ushort cpmt_trr4;
+ ushort cpmt_tcr3;
+ ushort cpmt_tcr4;
+ ushort cpmt_tcn3;
+ ushort cpmt_tcn4;
+ ushort cpmt_ter1;
+ ushort cpmt_ter2;
+ ushort cpmt_ter3;
+ ushort cpmt_ter4;
+ char res2[8];
+} cpmtimer8xx_t;
+
+/* Finally, the Communication Processor stuff.....
+*/
+typedef struct scc { /* Serial communication channels */
+ uint scc_gsmrl;
+ uint scc_gsmrh;
+ ushort scc_psmr;
+ char res1[2];
+ ushort scc_todr;
+ ushort scc_dsr;
+ ushort scc_scce;
+ char res2[2];
+ ushort scc_sccm;
+ char res3;
+ u_char scc_sccs;
+ char res4[8];
+} scc_t;
+
+typedef struct smc { /* Serial management channels */
+ char res1[2];
+ ushort smc_smcmr;
+ char res2[2];
+ u_char smc_smce;
+ char res3[3];
+ u_char smc_smcm;
+ char res4[5];
+} smc_t;
+
+/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but
+ * it fits within the address space.
+ */
+
+typedef struct fec {
+ uint fec_addr_low; /* lower 32 bits of station address */
+ ushort fec_addr_high; /* upper 16 bits of station address */
+ ushort res1; /* reserved */
+ uint fec_hash_table_high; /* upper 32-bits of hash table */
+ uint fec_hash_table_low; /* lower 32-bits of hash table */
+ uint fec_r_des_start; /* beginning of Rx descriptor ring */
+ uint fec_x_des_start; /* beginning of Tx descriptor ring */
+ uint fec_r_buff_size; /* Rx buffer size */
+ uint res2[9]; /* reserved */
+ uint fec_ecntrl; /* ethernet control register */
+ uint fec_ievent; /* interrupt event register */
+ uint fec_imask; /* interrupt mask register */
+ uint fec_ivec; /* interrupt level and vector status */
+ uint fec_r_des_active; /* Rx ring updated flag */
+ uint fec_x_des_active; /* Tx ring updated flag */
+ uint res3[10]; /* reserved */
+ uint fec_mii_data; /* MII data register */
+ uint fec_mii_speed; /* MII speed control register */
+ uint res4[17]; /* reserved */
+ uint fec_r_bound; /* end of RAM (read-only) */
+ uint fec_r_fstart; /* Rx FIFO start address */
+ uint res5[6]; /* reserved */
+ uint fec_x_fstart; /* Tx FIFO start address */
+ uint res6[17]; /* reserved */
+ uint fec_fun_code; /* fec SDMA function code */
+ uint res7[3]; /* reserved */
+ uint fec_r_cntrl; /* Rx control register */
+ uint fec_r_hash; /* Rx hash register */
+ uint res8[14]; /* reserved */
+ uint fec_x_cntrl; /* Tx control register */
+ uint res9[0x1e]; /* reserved */
+} fec_t;
+
+/* The FEC and LCD color map share the same address space....
+ * I guess we will never see an 823T :-).
+ */
+union fec_lcd {
+ fec_t fl_un_fec;
+ u_char fl_un_cmap[0x200];
+};
+
+typedef struct comm_proc {
+ /* General control and status registers.
+ */
+ ushort cp_cpcr;
+ u_char res1[2];
+ ushort cp_rccr;
+ u_char res2;
+ u_char cp_rmds;
+ u_char res3[4];
+ ushort cp_cpmcr1;
+ ushort cp_cpmcr2;
+ ushort cp_cpmcr3;
+ ushort cp_cpmcr4;
+ u_char res4[2];
+ ushort cp_rter;
+ u_char res5[2];
+ ushort cp_rtmr;
+ u_char res6[0x14];
+
+ /* Baud rate generators.
+ */
+ uint cp_brgc1;
+ uint cp_brgc2;
+ uint cp_brgc3;
+ uint cp_brgc4;
+
+ /* Serial Communication Channels.
+ */
+ scc_t cp_scc[4];
+
+ /* Serial Management Channels.
+ */
+ smc_t cp_smc[2];
+
+ /* Serial Peripheral Interface.
+ */
+ ushort cp_spmode;
+ u_char res7[4];
+ u_char cp_spie;
+ u_char res8[3];
+ u_char cp_spim;
+ u_char res9[2];
+ u_char cp_spcom;
+ u_char res10[2];
+
+ /* Parallel Interface Port.
+ */
+ u_char res11[2];
+ ushort cp_pipc;
+ u_char res12[2];
+ ushort cp_ptpr;
+ uint cp_pbdir;
+ uint cp_pbpar;
+ u_char res13[2];
+ ushort cp_pbodr;
+ uint cp_pbdat;
+
+ /* Port E - MPC87x/88x only.
+ */
+ uint cp_pedir;
+ uint cp_pepar;
+ uint cp_peso;
+ uint cp_peodr;
+ uint cp_pedat;
+
+ /* Communications Processor Timing Register -
+ Contains RMII Timing for the FECs on MPC87x/88x only.
+ */
+ uint cp_cptr;
+
+ /* Serial Interface and Time Slot Assignment.
+ */
+ uint cp_simode;
+ u_char cp_sigmr;
+ u_char res15;
+ u_char cp_sistr;
+ u_char cp_sicmr;
+ u_char res16[4];
+ uint cp_sicr;
+ uint cp_sirp;
+ u_char res17[0xc];
+
+ /* 256 bytes of MPC823 video controller RAM array.
+ */
+ u_char cp_vcram[0x100];
+ u_char cp_siram[0x200];
+
+ /* The fast ethernet controller is not really part of the CPM,
+ * but it resides in the address space.
+ * The LCD color map is also here.
+ */
+ union fec_lcd fl_un;
+#define cp_fec fl_un.fl_un_fec
+#define lcd_cmap fl_un.fl_un_cmap
+ char res18[0xE00];
+
+ /* The DUET family has a second FEC here */
+ fec_t cp_fec2;
+#define cp_fec1 cp_fec /* consistency macro */
+
+ /* Dual Ported RAM follows.
+ * There are many different formats for this memory area
+ * depending upon the devices used and options chosen.
+ * Some processors don't have all of it populated.
+ */
+ u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */
+ u_char cp_dparam[0x400]; /* Parameter RAM */
+} cpm8xx_t;
+
+/* Internal memory map.
+*/
+typedef struct immap {
+ sysconf8xx_t im_siu_conf; /* SIU Configuration */
+ pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */
+ memctl8xx_t im_memctl; /* Memory Controller */
+ sit8xx_t im_sit; /* System integration timers */
+ car8xx_t im_clkrst; /* Clocks and reset */
+ sitk8xx_t im_sitk; /* Sys int timer keys */
+ cark8xx_t im_clkrstk; /* Clocks and reset keys */
+ vid823_t im_vid; /* Video (823 only) */
+ lcd823_t im_lcd; /* LCD (823 only) */
+ i2c8xx_t im_i2c; /* I2C control/status */
+ sdma8xx_t im_sdma; /* SDMA control/status */
+ cpic8xx_t im_cpic; /* CPM Interrupt Controller */
+ iop8xx_t im_ioport; /* IO Port control/status */
+ cpmtimer8xx_t im_cpmtimer; /* CPM timers */
+ cpm8xx_t im_cpm; /* Communication processor */
+} immap_t;
+
+#endif /* __IMMAP_8XX__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/a.out.h b/include/asm-ppc/a.out.h
new file mode 100644
index 0000000..8979a94
--- /dev/null
+++ b/include/asm-ppc/a.out.h
@@ -0,0 +1,26 @@
+#ifndef __PPC_A_OUT_H__
+#define __PPC_A_OUT_H__
+
+/* grabbed from the intel stuff */
+#define STACK_TOP TASK_SIZE
+
+
+struct exec
+{
+ unsigned long a_info; /* Use macros N_MAGIC, etc for access */
+ unsigned a_text; /* length of text, in bytes */
+ unsigned a_data; /* length of data, in bytes */
+ unsigned a_bss; /* length of uninitialized data area for file, in bytes */
+ unsigned a_syms; /* length of symbol table data in file, in bytes */
+ unsigned a_entry; /* start address */
+ unsigned a_trsize; /* length of relocation info for text, in bytes */
+ unsigned a_drsize; /* length of relocation info for data, in bytes */
+};
+
+
+#define N_TRSIZE(a) ((a).a_trsize)
+#define N_DRSIZE(a) ((a).a_drsize)
+#define N_SYMSIZE(a) ((a).a_syms)
+
+
+#endif
diff --git a/include/asm-ppc/agp.h b/include/asm-ppc/agp.h
new file mode 100644
index 0000000..be27cfa8
--- /dev/null
+++ b/include/asm-ppc/agp.h
@@ -0,0 +1,13 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+#include <asm/io.h>
+
+/* nothing much needed here */
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_mappings()
+#define flush_agp_cache() mb()
+
+#endif
diff --git a/include/asm-ppc/amigahw.h b/include/asm-ppc/amigahw.h
new file mode 100644
index 0000000..8c98945
--- /dev/null
+++ b/include/asm-ppc/amigahw.h
@@ -0,0 +1,17 @@
+#ifdef __KERNEL__
+#ifndef __ASMPPC_AMIGAHW_H
+#define __ASMPPC_AMIGAHW_H
+
+#include <linux/config.h>
+#include <asm-m68k/amigahw.h>
+
+#undef CHIP_PHYSADDR
+#ifdef CONFIG_APUS_FAST_EXCEPT
+#define CHIP_PHYSADDR (0x000000)
+#else
+#define CHIP_PHYSADDR (0x004000)
+#endif
+
+
+#endif /* __ASMPPC_AMIGAHW_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigaints.h b/include/asm-ppc/amigaints.h
new file mode 100644
index 0000000..aa3ff63
--- /dev/null
+++ b/include/asm-ppc/amigaints.h
@@ -0,0 +1,133 @@
+/*
+** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 10/2/92 by Greg Harp
+*/
+
+#ifdef __KERNEL__
+#ifndef _ASMm68k_AMIGAINTS_H_
+#define _ASMm68k_AMIGAINTS_H_
+
+/*
+** Amiga Interrupt sources.
+**
+*/
+
+#define AUTO_IRQS (8)
+#define AMI_STD_IRQS (14)
+#define CIA_IRQS (5)
+#define AMI_IRQS (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
+
+/* vertical blanking interrupt */
+#define IRQ_AMIGA_VERTB 0
+
+/* copper interrupt */
+#define IRQ_AMIGA_COPPER 1
+
+/* Audio interrupts */
+#define IRQ_AMIGA_AUD0 2
+#define IRQ_AMIGA_AUD1 3
+#define IRQ_AMIGA_AUD2 4
+#define IRQ_AMIGA_AUD3 5
+
+/* Blitter done interrupt */
+#define IRQ_AMIGA_BLIT 6
+
+/* floppy disk interrupts */
+#define IRQ_AMIGA_DSKSYN 7
+#define IRQ_AMIGA_DSKBLK 8
+
+/* builtin serial port interrupts */
+#define IRQ_AMIGA_RBF 9
+#define IRQ_AMIGA_TBE 10
+
+/* software interrupts */
+#define IRQ_AMIGA_SOFT 11
+
+/* interrupts from external hardware */
+#define IRQ_AMIGA_PORTS 12
+#define IRQ_AMIGA_EXTER 13
+
+/* CIA interrupt sources */
+#define IRQ_AMIGA_CIAA 14
+#define IRQ_AMIGA_CIAA_TA 14
+#define IRQ_AMIGA_CIAA_TB 15
+#define IRQ_AMIGA_CIAA_ALRM 16
+#define IRQ_AMIGA_CIAA_SP 17
+#define IRQ_AMIGA_CIAA_FLG 18
+#define IRQ_AMIGA_CIAB 19
+#define IRQ_AMIGA_CIAB_TA 19
+#define IRQ_AMIGA_CIAB_TB 20
+#define IRQ_AMIGA_CIAB_ALRM 21
+#define IRQ_AMIGA_CIAB_SP 22
+#define IRQ_AMIGA_CIAB_FLG 23
+
+/* auto-vector interrupts */
+#define IRQ_AMIGA_AUTO 24
+#define IRQ_AMIGA_AUTO_0 24 /* This is just a dummy */
+#define IRQ_AMIGA_AUTO_1 25
+#define IRQ_AMIGA_AUTO_2 26
+#define IRQ_AMIGA_AUTO_3 27
+#define IRQ_AMIGA_AUTO_4 28
+#define IRQ_AMIGA_AUTO_5 29
+#define IRQ_AMIGA_AUTO_6 30
+#define IRQ_AMIGA_AUTO_7 31
+
+#define IRQ_FLOPPY IRQ_AMIGA_DSKBLK
+
+/* INTREQR masks */
+#define IRQ1_MASK 0x0007 /* INTREQR mask for IRQ 1 */
+#define IRQ2_MASK 0x0008 /* INTREQR mask for IRQ 2 */
+#define IRQ3_MASK 0x0070 /* INTREQR mask for IRQ 3 */
+#define IRQ4_MASK 0x0780 /* INTREQR mask for IRQ 4 */
+#define IRQ5_MASK 0x1800 /* INTREQR mask for IRQ 5 */
+#define IRQ6_MASK 0x2000 /* INTREQR mask for IRQ 6 */
+#define IRQ7_MASK 0x4000 /* INTREQR mask for IRQ 7 */
+
+#define IF_SETCLR 0x8000 /* set/clr bit */
+#define IF_INTEN 0x4000 /* master interrupt bit in INT* registers */
+#define IF_EXTER 0x2000 /* external level 6 and CIA B interrupt */
+#define IF_DSKSYN 0x1000 /* disk sync interrupt */
+#define IF_RBF 0x0800 /* serial receive buffer full interrupt */
+#define IF_AUD3 0x0400 /* audio channel 3 done interrupt */
+#define IF_AUD2 0x0200 /* audio channel 2 done interrupt */
+#define IF_AUD1 0x0100 /* audio channel 1 done interrupt */
+#define IF_AUD0 0x0080 /* audio channel 0 done interrupt */
+#define IF_BLIT 0x0040 /* blitter done interrupt */
+#define IF_VERTB 0x0020 /* vertical blanking interrupt */
+#define IF_COPER 0x0010 /* copper interrupt */
+#define IF_PORTS 0x0008 /* external level 2 and CIA A interrupt */
+#define IF_SOFT 0x0004 /* software initiated interrupt */
+#define IF_DSKBLK 0x0002 /* diskblock DMA finished */
+#define IF_TBE 0x0001 /* serial transmit buffer empty interrupt */
+
+extern void amiga_do_irq(int irq, struct pt_regs *fp);
+extern void amiga_do_irq_list(int irq, struct pt_regs *fp);
+
+/* CIA interrupt control register bits */
+
+#define CIA_ICR_TA 0x01
+#define CIA_ICR_TB 0x02
+#define CIA_ICR_ALRM 0x04
+#define CIA_ICR_SP 0x08
+#define CIA_ICR_FLG 0x10
+#define CIA_ICR_ALL 0x1f
+#define CIA_ICR_SETCLR 0x80
+
+/* to access the interrupt control registers of CIA's use only
+** these functions, they behave exactly like the amiga os routines
+*/
+
+extern struct ciabase ciaa_base, ciab_base;
+
+extern unsigned char cia_set_irq(unsigned int irq, int set);
+extern unsigned char cia_able_irq(unsigned int irq, int enable);
+
+#endif /* asm-m68k/amigaints.h */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigappc.h b/include/asm-ppc/amigappc.h
new file mode 100644
index 0000000..35114ce
--- /dev/null
+++ b/include/asm-ppc/amigappc.h
@@ -0,0 +1,85 @@
+/*
+** asm-ppc/amigappc.h -- This header defines some values and pointers for
+** the Phase 5 PowerUp card.
+**
+** Copyright 1997, 1998 by Phase5, Germany.
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 7/22/97 by Jesper Skov
+*/
+
+#ifdef __KERNEL__
+#ifndef _M68K_AMIGAPPC_H
+#define _M68K_AMIGAPPC_H
+
+#ifndef __ASSEMBLY__
+
+/* #include <asm/system.h> */
+#define mb() __asm__ __volatile__ ("sync" : : : "memory")
+
+#define APUS_WRITE(_a_, _v_) \
+do { \
+ (*((volatile unsigned char *)(_a_)) = (_v_)); \
+ mb(); \
+} while (0)
+
+#define APUS_READ(_a_, _v_) \
+do { \
+ (_v_) = (*((volatile unsigned char *)(_a_))); \
+ mb(); \
+} while (0)
+#endif /* ndef __ASSEMBLY__ */
+
+/* Maybe add a [#ifdef WANT_ZTWOBASE] condition to amigahw.h? */
+#define zTwoBase (0x80000000)
+
+#define APUS_IPL_BASE (zTwoBase + 0x00f60000)
+#define APUS_REG_RESET (APUS_IPL_BASE + 0x00)
+#define APUS_REG_WAITSTATE (APUS_IPL_BASE + 0x10)
+#define APUS_REG_SHADOW (APUS_IPL_BASE + 0x18)
+#define APUS_REG_LOCK (APUS_IPL_BASE + 0x20)
+#define APUS_REG_INT (APUS_IPL_BASE + 0x28)
+#define APUS_IPL_EMU (APUS_IPL_BASE + 0x30)
+#define APUS_INT_LVL (APUS_IPL_BASE + 0x38)
+
+#define REGSHADOW_SETRESET (0x80)
+#define REGSHADOW_SELFRESET (0x40)
+
+#define REGLOCK_SETRESET (0x80)
+#define REGLOCK_BLACKMAGICK1 (0x40)
+#define REGLOCK_BLACKMAGICK2 (0x20)
+#define REGLOCK_BLACKMAGICK3 (0x10)
+
+#define REGWAITSTATE_SETRESET (0x80)
+#define REGWAITSTATE_PPCW (0x08)
+#define REGWAITSTATE_PPCR (0x04)
+
+#define REGRESET_SETRESET (0x80)
+#define REGRESET_PPCRESET (0x10)
+#define REGRESET_M68KRESET (0x08)
+#define REGRESET_AMIGARESET (0x04)
+#define REGRESET_AUXRESET (0x02)
+#define REGRESET_SCSIRESET (0x01)
+
+#define REGINT_SETRESET (0x80)
+#define REGINT_ENABLEIPL (0x02)
+#define REGINT_INTMASTER (0x01)
+
+#define IPLEMU_SETRESET (0x80)
+#define IPLEMU_DISABLEINT (0x40)
+#define IPLEMU_IPL2 (0x20)
+#define IPLEMU_IPL1 (0x10)
+#define IPLEMU_IPL0 (0x08)
+#define IPLEMU_PPCIPL2 (0x04)
+#define IPLEMU_PPCIPL1 (0x02)
+#define IPLEMU_PPCIPL0 (0x01)
+#define IPLEMU_IPLMASK (IPLEMU_PPCIPL2|IPLEMU_PPCIPL1|IPLEMU_PPCIPL0)
+
+#define INTLVL_SETRESET (0x80)
+#define INTLVL_MASK (0x7f)
+
+#endif /* _M68k_AMIGAPPC_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigayle.h b/include/asm-ppc/amigayle.h
new file mode 100644
index 0000000..1fe0b87
--- /dev/null
+++ b/include/asm-ppc/amigayle.h
@@ -0,0 +1 @@
+#include <asm-m68k/amigayle.h>
diff --git a/include/asm-ppc/amipcmcia.h b/include/asm-ppc/amipcmcia.h
new file mode 100644
index 0000000..3f65f63
--- /dev/null
+++ b/include/asm-ppc/amipcmcia.h
@@ -0,0 +1 @@
+#include <asm-m68k/amipcmcia.h>
diff --git a/include/asm-ppc/ans-lcd.h b/include/asm-ppc/ans-lcd.h
new file mode 100644
index 0000000..d795b9f
--- /dev/null
+++ b/include/asm-ppc/ans-lcd.h
@@ -0,0 +1,11 @@
+#ifndef _PPC_ANS_LCD_H
+#define _PPC_ANS_LCD_H
+
+#define ANSLCD_MINOR 156
+
+#define ANSLCD_CLEAR 0x01
+#define ANSLCD_SENDCTRL 0x02
+#define ANSLCD_SETSHORTDELAY 0x03
+#define ANSLCD_SETLONGDELAY 0x04
+
+#endif
diff --git a/include/asm-ppc/atomic.h b/include/asm-ppc/atomic.h
new file mode 100644
index 0000000..eeafd50
--- /dev/null
+++ b/include/asm-ppc/atomic.h
@@ -0,0 +1,214 @@
+/*
+ * PowerPC atomic operations
+ */
+
+#ifndef _ASM_PPC_ATOMIC_H_
+#define _ASM_PPC_ATOMIC_H_
+
+typedef struct { volatile int counter; } atomic_t;
+
+#ifdef __KERNEL__
+
+#define ATOMIC_INIT(i) { (i) }
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v,i) (((v)->counter) = (i))
+
+extern void atomic_clear_mask(unsigned long mask, unsigned long *addr);
+
+#ifdef CONFIG_SMP
+#define SMP_SYNC "sync"
+#define SMP_ISYNC "\n\tisync"
+#else
+#define SMP_SYNC ""
+#define SMP_ISYNC
+#endif
+
+/* Erratum #77 on the 405 means we need a sync or dcbt before every stwcx.
+ * The old ATOMIC_SYNC_FIX covered some but not all of this.
+ */
+#ifdef CONFIG_IBM405_ERR77
+#define PPC405_ERR77(ra,rb) "dcbt " #ra "," #rb ";"
+#else
+#define PPC405_ERR77(ra,rb)
+#endif
+
+static __inline__ void atomic_add(int a, atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%3 # atomic_add\n\
+ add %0,%2,%0\n"
+ PPC405_ERR77(0,%3)
+" stwcx. %0,0,%3 \n\
+ bne- 1b"
+ : "=&r" (t), "=m" (v->counter)
+ : "r" (a), "r" (&v->counter), "m" (v->counter)
+ : "cc");
+}
+
+static __inline__ int atomic_add_return(int a, atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%2 # atomic_add_return\n\
+ add %0,%1,%0\n"
+ PPC405_ERR77(0,%2)
+" stwcx. %0,0,%2 \n\
+ bne- 1b"
+ SMP_ISYNC
+ : "=&r" (t)
+ : "r" (a), "r" (&v->counter)
+ : "cc", "memory");
+
+ return t;
+}
+
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+
+static __inline__ void atomic_sub(int a, atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%3 # atomic_sub\n\
+ subf %0,%2,%0\n"
+ PPC405_ERR77(0,%3)
+" stwcx. %0,0,%3 \n\
+ bne- 1b"
+ : "=&r" (t), "=m" (v->counter)
+ : "r" (a), "r" (&v->counter), "m" (v->counter)
+ : "cc");
+}
+
+static __inline__ int atomic_sub_return(int a, atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%2 # atomic_sub_return\n\
+ subf %0,%1,%0\n"
+ PPC405_ERR77(0,%2)
+" stwcx. %0,0,%2 \n\
+ bne- 1b"
+ SMP_ISYNC
+ : "=&r" (t)
+ : "r" (a), "r" (&v->counter)
+ : "cc", "memory");
+
+ return t;
+}
+
+static __inline__ void atomic_inc(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%2 # atomic_inc\n\
+ addic %0,%0,1\n"
+ PPC405_ERR77(0,%2)
+" stwcx. %0,0,%2 \n\
+ bne- 1b"
+ : "=&r" (t), "=m" (v->counter)
+ : "r" (&v->counter), "m" (v->counter)
+ : "cc");
+}
+
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%1 # atomic_inc_return\n\
+ addic %0,%0,1\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %0,0,%1 \n\
+ bne- 1b"
+ SMP_ISYNC
+ : "=&r" (t)
+ : "r" (&v->counter)
+ : "cc", "memory");
+
+ return t;
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static __inline__ void atomic_dec(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%2 # atomic_dec\n\
+ addic %0,%0,-1\n"
+ PPC405_ERR77(0,%2)\
+" stwcx. %0,0,%2\n\
+ bne- 1b"
+ : "=&r" (t), "=m" (v->counter)
+ : "r" (&v->counter), "m" (v->counter)
+ : "cc");
+}
+
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%1 # atomic_dec_return\n\
+ addic %0,%0,-1\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %0,0,%1\n\
+ bne- 1b"
+ SMP_ISYNC
+ : "=&r" (t)
+ : "r" (&v->counter)
+ : "cc", "memory");
+
+ return t;
+}
+
+#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0)
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1.
+ */
+static __inline__ int atomic_dec_if_positive(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\
+ addic. %0,%0,-1\n\
+ blt- 2f\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %0,0,%1\n\
+ bne- 1b"
+ SMP_ISYNC
+ "\n\
+2:" : "=&r" (t)
+ : "r" (&v->counter)
+ : "cc", "memory");
+
+ return t;
+}
+
+#define __MB __asm__ __volatile__ (SMP_SYNC : : : "memory")
+#define smp_mb__before_atomic_dec() __MB
+#define smp_mb__after_atomic_dec() __MB
+#define smp_mb__before_atomic_inc() __MB
+#define smp_mb__after_atomic_inc() __MB
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_PPC_ATOMIC_H_ */
diff --git a/include/asm-ppc/backlight.h b/include/asm-ppc/backlight.h
new file mode 100644
index 0000000..3a1c3de
--- /dev/null
+++ b/include/asm-ppc/backlight.h
@@ -0,0 +1,30 @@
+/*
+ * Routines for handling backlight control on PowerBooks
+ *
+ * For now, implementation resides in arch/ppc/kernel/pmac_support.c
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_BACKLIGHT_H
+#define __ASM_PPC_BACKLIGHT_H
+
+/* Abstract values */
+#define BACKLIGHT_OFF 0
+#define BACKLIGHT_MIN 1
+#define BACKLIGHT_MAX 0xf
+
+struct backlight_controller {
+ int (*set_enable)(int enable, int level, void *data);
+ int (*set_level)(int level, void *data);
+};
+
+extern void register_backlight_controller(struct backlight_controller *ctrler, void *data, char *type);
+extern void unregister_backlight_controller(struct backlight_controller *ctrler, void *data);
+
+extern int set_backlight_enable(int enable);
+extern int get_backlight_enable(void);
+extern int set_backlight_level(int level);
+extern int get_backlight_level(void);
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/bitops.h b/include/asm-ppc/bitops.h
new file mode 100644
index 0000000..e30f536
--- /dev/null
+++ b/include/asm-ppc/bitops.h
@@ -0,0 +1,460 @@
+/*
+ * bitops.h: Bit string operations on the ppc
+ */
+
+#ifdef __KERNEL__
+#ifndef _PPC_BITOPS_H
+#define _PPC_BITOPS_H
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+
+/*
+ * The test_and_*_bit operations are taken to imply a memory barrier
+ * on SMP systems.
+ */
+#ifdef CONFIG_SMP
+#define SMP_WMB "eieio\n"
+#define SMP_MB "\nsync"
+#else
+#define SMP_WMB
+#define SMP_MB
+#endif /* CONFIG_SMP */
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+ unsigned long old;
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%3 \n\
+ or %0,%0,%2 \n"
+ PPC405_ERR77(0,%3)
+" stwcx. %0,0,%3 \n\
+ bne- 1b"
+ : "=&r" (old), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc" );
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ void __set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ *p |= mask;
+}
+
+/*
+ * clear_bit doesn't imply a memory barrier
+ */
+#define smp_mb__before_clear_bit() smp_mb()
+#define smp_mb__after_clear_bit() smp_mb()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long old;
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%3 \n\
+ andc %0,%0,%2 \n"
+ PPC405_ERR77(0,%3)
+" stwcx. %0,0,%3 \n\
+ bne- 1b"
+ : "=&r" (old), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc");
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ void __clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ *p &= ~mask;
+}
+
+static __inline__ void change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long old;
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%3 \n\
+ xor %0,%0,%2 \n"
+ PPC405_ERR77(0,%3)
+" stwcx. %0,0,%3 \n\
+ bne- 1b"
+ : "=&r" (old), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc");
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ void __change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ *p ^= mask;
+}
+
+/*
+ * test_and_*_bit do imply a memory barrier (?)
+ */
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned int old, t;
+ unsigned int mask = 1 << (nr & 0x1f);
+ volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+ __asm__ __volatile__(SMP_WMB "\n\
+1: lwarx %0,0,%4 \n\
+ or %1,%0,%3 \n"
+ PPC405_ERR77(0,%4)
+" stwcx. %1,0,%4 \n\
+ bne 1b"
+ SMP_MB
+ : "=&r" (old), "=&r" (t), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc", "memory");
+
+ return (old & mask) != 0;
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+ unsigned long old = *p;
+
+ *p = old | mask;
+ return (old & mask) != 0;
+}
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned int old, t;
+ unsigned int mask = 1 << (nr & 0x1f);
+ volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+ __asm__ __volatile__(SMP_WMB "\n\
+1: lwarx %0,0,%4 \n\
+ andc %1,%0,%3 \n"
+ PPC405_ERR77(0,%4)
+" stwcx. %1,0,%4 \n\
+ bne 1b"
+ SMP_MB
+ : "=&r" (old), "=&r" (t), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc", "memory");
+
+ return (old & mask) != 0;
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+ unsigned long old = *p;
+
+ *p = old & ~mask;
+ return (old & mask) != 0;
+}
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned int old, t;
+ unsigned int mask = 1 << (nr & 0x1f);
+ volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+ __asm__ __volatile__(SMP_WMB "\n\
+1: lwarx %0,0,%4 \n\
+ xor %1,%0,%3 \n"
+ PPC405_ERR77(0,%4)
+" stwcx. %1,0,%4 \n\
+ bne 1b"
+ SMP_MB
+ : "=&r" (old), "=&r" (t), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc", "memory");
+
+ return (old & mask) != 0;
+}
+
+/*
+ * non-atomic version
+ */
+static __inline__ int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+ unsigned long old = *p;
+
+ *p = old ^ mask;
+ return (old & mask) != 0;
+}
+
+static __inline__ int test_bit(int nr, __const__ volatile unsigned long *addr)
+{
+ return ((addr[nr >> 5] >> (nr & 0x1f)) & 1) != 0;
+}
+
+/* Return the bit position of the most significant 1 bit in a word */
+static __inline__ int __ilog2(unsigned long x)
+{
+ int lz;
+
+ asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+ return 31 - lz;
+}
+
+static __inline__ int ffz(unsigned long x)
+{
+ if ((x = ~x) == 0)
+ return 32;
+ return __ilog2(x & -x);
+}
+
+static inline int __ffs(unsigned long x)
+{
+ return __ilog2(x & -x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+ return __ilog2(x & -x) + 1;
+}
+
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+static __inline__ int fls(unsigned int x)
+{
+ int lz;
+
+ asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+ return 32 - lz;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/*
+ * Find the first bit set in a 140-bit bitmap.
+ * The first 100 bits are unlikely to be set.
+ */
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+ if (unlikely(b[0]))
+ return __ffs(b[0]);
+ if (unlikely(b[1]))
+ return __ffs(b[1]) + 32;
+ if (unlikely(b[2]))
+ return __ffs(b[2]) + 64;
+ if (b[3])
+ return __ffs(b[3]) + 96;
+ return __ffs(b[4]) + 128;
+}
+
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static __inline__ unsigned long find_next_bit(const unsigned long *addr,
+ unsigned long size, unsigned long offset)
+{
+ unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+ unsigned int result = offset & ~31UL;
+ unsigned int tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset &= 31UL;
+ if (offset) {
+ tmp = *p++;
+ tmp &= ~0UL << offset;
+ if (size < 32)
+ goto found_first;
+ if (tmp)
+ goto found_middle;
+ size -= 32;
+ result += 32;
+ }
+ while (size >= 32) {
+ if ((tmp = *p++) != 0)
+ goto found_middle;
+ result += 32;
+ size -= 32;
+ }
+ if (!size)
+ return result;
+ tmp = *p;
+
+found_first:
+ tmp &= ~0UL >> (32 - size);
+ if (tmp == 0UL) /* Are any bits set? */
+ return result + size; /* Nope. */
+found_middle:
+ return result + __ffs(tmp);
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+#define find_first_bit(addr, size) \
+ find_next_bit((addr), (size), 0)
+
+/*
+ * This implementation of find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h.
+ */
+#define find_first_zero_bit(addr, size) \
+ find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long find_next_zero_bit(const unsigned long *addr,
+ unsigned long size, unsigned long offset)
+{
+ unsigned int * p = ((unsigned int *) addr) + (offset >> 5);
+ unsigned int result = offset & ~31UL;
+ unsigned int tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset &= 31UL;
+ if (offset) {
+ tmp = *p++;
+ tmp |= ~0UL >> (32-offset);
+ if (size < 32)
+ goto found_first;
+ if (tmp != ~0U)
+ goto found_middle;
+ size -= 32;
+ result += 32;
+ }
+ while (size >= 32) {
+ if ((tmp = *p++) != ~0U)
+ goto found_middle;
+ result += 32;
+ size -= 32;
+ }
+ if (!size)
+ return result;
+ tmp = *p;
+found_first:
+ tmp |= ~0UL << size;
+ if (tmp == ~0UL) /* Are any bits zero? */
+ return result + size; /* Nope. */
+found_middle:
+ return result + ffz(tmp);
+}
+
+
+#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x18, (unsigned long *)(addr))
+#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 0x18, (unsigned long *)(addr))
+#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x18, (unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)(addr))
+
+static __inline__ int ext2_test_bit(int nr, __const__ void * addr)
+{
+ __const__ unsigned char *ADDR = (__const__ unsigned char *) addr;
+
+ return (ADDR[nr >> 3] >> (nr & 7)) & 1;
+}
+
+/*
+ * This implementation of ext2_find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h and modified for a big-endian machine.
+ */
+
+#define ext2_find_first_zero_bit(addr, size) \
+ ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(const void *addr,
+ unsigned long size, unsigned long offset)
+{
+ unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+ unsigned int result = offset & ~31UL;
+ unsigned int tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset &= 31UL;
+ if (offset) {
+ tmp = cpu_to_le32p(p++);
+ tmp |= ~0UL >> (32-offset);
+ if (size < 32)
+ goto found_first;
+ if (tmp != ~0U)
+ goto found_middle;
+ size -= 32;
+ result += 32;
+ }
+ while (size >= 32) {
+ if ((tmp = cpu_to_le32p(p++)) != ~0U)
+ goto found_middle;
+ result += 32;
+ size -= 32;
+ }
+ if (!size)
+ return result;
+ tmp = cpu_to_le32p(p);
+found_first:
+ tmp |= ~0U << size;
+ if (tmp == ~0UL) /* Are any bits zero? */
+ return result + size; /* Nope. */
+found_middle:
+ return result + ffz(tmp);
+}
+
+/* Bitmap functions for the minix filesystem. */
+#define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr))
+#define minix_test_and_clear_bit(nr,addr) ext2_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) ext2_test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) ext2_find_first_zero_bit(addr,size)
+
+#endif /* _PPC_BITOPS_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/bootinfo.h b/include/asm-ppc/bootinfo.h
new file mode 100644
index 0000000..93d955c
--- /dev/null
+++ b/include/asm-ppc/bootinfo.h
@@ -0,0 +1,52 @@
+/*
+ * Non-machine dependent bootinfo structure. Basic idea
+ * borrowed from the m68k.
+ *
+ * Copyright (C) 1999 Cort Dougan <cort@ppc.kernel.org>
+ */
+
+#ifdef __KERNEL__
+#ifndef _PPC_BOOTINFO_H
+#define _PPC_BOOTINFO_H
+
+#include <linux/config.h>
+#include <asm/page.h>
+
+#if defined(CONFIG_APUS) && !defined(__BOOTER__)
+#include <asm-m68k/bootinfo.h>
+#else
+
+struct bi_record {
+ unsigned long tag; /* tag ID */
+ unsigned long size; /* size of record (in bytes) */
+ unsigned long data[0]; /* data */
+};
+
+#define BI_FIRST 0x1010 /* first record - marker */
+#define BI_LAST 0x1011 /* last record - marker */
+#define BI_CMD_LINE 0x1012
+#define BI_BOOTLOADER_ID 0x1013
+#define BI_INITRD 0x1014
+#define BI_SYSMAP 0x1015
+#define BI_MACHTYPE 0x1016
+#define BI_MEMSIZE 0x1017
+#define BI_BOARD_INFO 0x1018
+
+extern struct bi_record *find_bootinfo(void);
+extern void bootinfo_init(struct bi_record *rec);
+extern void bootinfo_append(unsigned long tag, unsigned long size, void * data);
+extern void parse_bootinfo(struct bi_record *rec);
+extern unsigned long boot_mem_size;
+
+static inline struct bi_record *
+bootinfo_addr(unsigned long offset)
+{
+
+ return (struct bi_record *)_ALIGN((offset) + (1 << 20) - 1,
+ (1 << 20));
+}
+#endif /* CONFIG_APUS */
+
+
+#endif /* _PPC_BOOTINFO_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/bootx.h b/include/asm-ppc/bootx.h
new file mode 100644
index 0000000..b0c51b4
--- /dev/null
+++ b/include/asm-ppc/bootx.h
@@ -0,0 +1,135 @@
+/*
+ * This file describes the structure passed from the BootX application
+ * (for MacOS) when it is used to boot Linux.
+ *
+ * Written by Benjamin Herrenschmidt.
+ */
+
+
+#ifndef __ASM_BOOTX_H__
+#define __ASM_BOOTX_H__
+
+#ifdef macintosh
+#include <Types.h>
+#include "linux_type_defs.h"
+#endif
+
+#ifdef macintosh
+/* All this requires PowerPC alignment */
+#pragma options align=power
+#endif
+
+/* On kernel entry:
+ *
+ * r3 = 0x426f6f58 ('BooX')
+ * r4 = pointer to boot_infos
+ * r5 = NULL
+ *
+ * Data and instruction translation disabled, interrupts
+ * disabled, kernel loaded at physical 0x00000000 on PCI
+ * machines (will be different on NuBus).
+ */
+
+#define BOOT_INFO_VERSION 5
+#define BOOT_INFO_COMPATIBLE_VERSION 1
+
+/* Bit in the architecture flag mask. More to be defined in
+ future versions. Note that either BOOT_ARCH_PCI or
+ BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
+ set additionally when BOOT_ARCH_NUBUS is set.
+ */
+#define BOOT_ARCH_PCI 0x00000001UL
+#define BOOT_ARCH_NUBUS 0x00000002UL
+#define BOOT_ARCH_NUBUS_PDM 0x00000010UL
+#define BOOT_ARCH_NUBUS_PERFORMA 0x00000020UL
+#define BOOT_ARCH_NUBUS_POWERBOOK 0x00000040UL
+
+/* Maximum number of ranges in phys memory map */
+#define MAX_MEM_MAP_SIZE 26
+
+/* This is the format of an element in the physical memory map. Note that
+ the map is optional and current BootX will only build it for pre-PCI
+ machines */
+typedef struct boot_info_map_entry
+{
+ __u32 physAddr; /* Physical starting address */
+ __u32 size; /* Size in bytes */
+} boot_info_map_entry_t;
+
+
+/* Here are the boot informations that are passed to the bootstrap
+ * Note that the kernel arguments and the device tree are appended
+ * at the end of this structure. */
+typedef struct boot_infos
+{
+ /* Version of this structure */
+ __u32 version;
+ /* backward compatible down to version: */
+ __u32 compatible_version;
+
+ /* NEW (vers. 2) this holds the current _logical_ base addr of
+ the frame buffer (for use by early boot message) */
+ __u8* logicalDisplayBase;
+
+ /* NEW (vers. 4) Apple's machine identification */
+ __u32 machineID;
+
+ /* NEW (vers. 4) Detected hw architecture */
+ __u32 architecture;
+
+ /* The device tree (internal addresses relative to the beginning of the tree,
+ * device tree offset relative to the beginning of this structure).
+ * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
+ * field is 0.
+ */
+ __u32 deviceTreeOffset; /* Device tree offset */
+ __u32 deviceTreeSize; /* Size of the device tree */
+
+ /* Some infos about the current MacOS display */
+ __u32 dispDeviceRect[4]; /* left,top,right,bottom */
+ __u32 dispDeviceDepth; /* (8, 16 or 32) */
+ __u8* dispDeviceBase; /* base address (physical) */
+ __u32 dispDeviceRowBytes; /* rowbytes (in bytes) */
+ __u32 dispDeviceColorsOffset; /* Colormap (8 bits only) or 0 (*) */
+ /* Optional offset in the registry to the current
+ * MacOS display. (Can be 0 when not detected) */
+ __u32 dispDeviceRegEntryOffset;
+
+ /* Optional pointer to boot ramdisk (offset from this structure) */
+ __u32 ramDisk;
+ __u32 ramDiskSize; /* size of ramdisk image */
+
+ /* Kernel command line arguments (offset from this structure) */
+ __u32 kernelParamsOffset;
+
+ /* ALL BELOW NEW (vers. 4) */
+
+ /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
+ (non-PCI) only. On PCI, memory is contiguous and it's size is in the
+ device-tree. */
+ boot_info_map_entry_t
+ physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
+ __u32 physMemoryMapSize; /* How many entries in map */
+
+
+ /* The framebuffer size (optional, currently 0) */
+ __u32 frameBufferSize; /* Represents a max size, can be 0. */
+
+ /* NEW (vers. 5) */
+
+ /* Total params size (args + colormap + device tree + ramdisk) */
+ __u32 totalParamsSize;
+
+} boot_infos_t;
+
+/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index is represented
+ * by 3 short words containing a 16 bits (unsigned) color component.
+ * Later versions may contain the gamma table for direct-color devices here.
+ */
+#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL)
+
+#ifdef macintosh
+#pragma options align=reset
+#endif
+
+#endif
diff --git a/include/asm-ppc/bseip.h b/include/asm-ppc/bseip.h
new file mode 100644
index 0000000..691f4a5
--- /dev/null
+++ b/include/asm-ppc/bseip.h
@@ -0,0 +1,38 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Bright Star Engineering ip-Engine board. Copied from the MBX stuff.
+ *
+ * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+ */
+#ifndef __MACH_BSEIP_DEFS
+#define __MACH_BSEIP_DEFS
+
+#ifndef __ASSEMBLY__
+/* A Board Information structure that is given to a program when
+ * prom starts it up.
+ */
+typedef struct bd_info {
+ unsigned int bi_memstart; /* Memory start address */
+ unsigned int bi_memsize; /* Memory (end) size in bytes */
+ unsigned int bi_intfreq; /* Internal Freq, in Hz */
+ unsigned int bi_busfreq; /* Bus Freq, in Hz */
+ unsigned char bi_enetaddr[6];
+ unsigned int bi_baudrate;
+} bd_t;
+
+extern bd_t m8xx_board_info;
+
+/* Memory map is configured by the PROM startup.
+ * All we need to get started is the IMMR.
+ */
+#define IMAP_ADDR ((uint)0xff000000)
+#define IMAP_SIZE ((uint)(64 * 1024))
+#define PCMCIA_MEM_ADDR ((uint)0x04000000)
+#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
+#endif /* !__ASSEMBLY__ */
+
+/* We don't use the 8259.
+*/
+#define NR_8259_INTS 0
+
+#endif
diff --git a/include/asm-ppc/btext.h b/include/asm-ppc/btext.h
new file mode 100644
index 0000000..36c7640
--- /dev/null
+++ b/include/asm-ppc/btext.h
@@ -0,0 +1,34 @@
+/*
+ * Definitions for using the procedures in btext.c.
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ */
+#ifndef __PPC_BTEXT_H
+#define __PPC_BTEXT_H
+#ifdef __KERNEL__
+
+#include <asm/bootx.h>
+
+extern void btext_clearscreen(void);
+extern void btext_flushscreen(void);
+
+extern unsigned long disp_BAT[2];
+
+extern boot_infos_t disp_bi;
+extern int boot_text_mapped;
+
+void btext_init(boot_infos_t *bi);
+void btext_welcome(void);
+void btext_prepare_BAT(void);
+void btext_setup_display(int width, int height, int depth, int pitch,
+ unsigned long address);
+void map_boot_text(void);
+void btext_update_display(unsigned long phys, int width, int height,
+ int depth, int pitch);
+
+void btext_drawchar(char c);
+void btext_drawstring(const char *str);
+void btext_drawhex(unsigned long v);
+
+#endif /* __KERNEL__ */
+#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-ppc/bug.h b/include/asm-ppc/bug.h
new file mode 100644
index 0000000..e99c6cb
--- /dev/null
+++ b/include/asm-ppc/bug.h
@@ -0,0 +1,55 @@
+#ifndef _PPC_BUG_H
+#define _PPC_BUG_H
+
+struct bug_entry {
+ unsigned long bug_addr;
+ int line;
+ const char *file;
+ const char *function;
+};
+
+/*
+ * If this bit is set in the line number it means that the trap
+ * is for WARN_ON rather than BUG or BUG_ON.
+ */
+#define BUG_WARNING_TRAP 0x1000000
+
+#define BUG() do { \
+ __asm__ __volatile__( \
+ "1: twi 31,0,0\n" \
+ ".section __bug_table,\"a\"\n\t" \
+ " .long 1b,%0,%1,%2\n" \
+ ".previous" \
+ : : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \
+} while (0)
+
+#define BUG_ON(x) do { \
+ if (!__builtin_constant_p(x) || (x)) { \
+ __asm__ __volatile__( \
+ "1: twnei %0,0\n" \
+ ".section __bug_table,\"a\"\n\t" \
+ " .long 1b,%1,%2,%3\n" \
+ ".previous" \
+ : : "r" (x), "i" (__LINE__), "i" (__FILE__), \
+ "i" (__FUNCTION__)); \
+ } \
+} while (0)
+
+#define WARN_ON(x) do { \
+ if (!__builtin_constant_p(x) || (x)) { \
+ __asm__ __volatile__( \
+ "1: twnei %0,0\n" \
+ ".section __bug_table,\"a\"\n\t" \
+ " .long 1b,%1,%2,%3\n" \
+ ".previous" \
+ : : "r" (x), "i" (__LINE__ + BUG_WARNING_TRAP), \
+ "i" (__FILE__), "i" (__FUNCTION__)); \
+ } \
+} while (0)
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_BUG_ON
+#define HAVE_ARCH_WARN_ON
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-ppc/bugs.h b/include/asm-ppc/bugs.h
new file mode 100644
index 0000000..8dce1e2
--- /dev/null
+++ b/include/asm-ppc/bugs.h
@@ -0,0 +1,6 @@
+/*
+ * This file is included by 'init/main.c'
+ */
+
+extern void
+check_bugs(void);
diff --git a/include/asm-ppc/byteorder.h b/include/asm-ppc/byteorder.h
new file mode 100644
index 0000000..c63c81e
--- /dev/null
+++ b/include/asm-ppc/byteorder.h
@@ -0,0 +1,76 @@
+#ifndef _PPC_BYTEORDER_H
+#define _PPC_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+#ifdef __KERNEL__
+
+extern __inline__ unsigned ld_le16(const volatile unsigned short *addr)
+{
+ unsigned val;
+
+ __asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+ return val;
+}
+
+extern __inline__ void st_le16(volatile unsigned short *addr, const unsigned val)
+{
+ __asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+extern __inline__ unsigned ld_le32(const volatile unsigned *addr)
+{
+ unsigned val;
+
+ __asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+ return val;
+}
+
+extern __inline__ void st_le32(volatile unsigned *addr, const unsigned val)
+{
+ __asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
+{
+ __u16 result;
+
+ __asm__("rlwimi %0,%2,8,16,23" : "=&r" (result) : "0" (value >> 8), "r" (value));
+ return result;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
+{
+ __u32 result;
+
+ __asm__("rlwimi %0,%2,24,16,23" : "=&r" (result) : "0" (value>>24), "r" (value));
+ __asm__("rlwimi %0,%2,8,8,15" : "=&r" (result) : "0" (result), "r" (value));
+ __asm__("rlwimi %0,%2,24,0,7" : "=&r" (result) : "0" (result), "r" (value));
+
+ return result;
+}
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+/* The same, but returns converted value from the location pointer by addr. */
+#define __arch__swab16p(addr) ld_le16(addr)
+#define __arch__swab32p(addr) ld_le32(addr)
+
+/* The same, but do the conversion in situ, ie. put the value back to addr. */
+#define __arch__swab16s(addr) st_le16(addr,*addr)
+#define __arch__swab32s(addr) st_le32(addr,*addr)
+
+#endif /* __KERNEL__ */
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _PPC_BYTEORDER_H */
diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h
new file mode 100644
index 0000000..38f2f1b
--- /dev/null
+++ b/include/asm-ppc/cache.h
@@ -0,0 +1,87 @@
+/*
+ * include/asm-ppc/cache.h
+ */
+#ifdef __KERNEL__
+#ifndef __ARCH_PPC_CACHE_H
+#define __ARCH_PPC_CACHE_H
+
+#include <linux/config.h>
+
+/* bytes per L1 cache line */
+#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
+#define L1_CACHE_LINE_SIZE 16
+#define LG_L1_CACHE_LINE_SIZE 4
+#define MAX_COPY_PREFETCH 1
+#elif defined(CONFIG_PPC64BRIDGE)
+#define L1_CACHE_LINE_SIZE 128
+#define LG_L1_CACHE_LINE_SIZE 7
+#define MAX_COPY_PREFETCH 1
+#else
+#define L1_CACHE_LINE_SIZE 32
+#define LG_L1_CACHE_LINE_SIZE 5
+#define MAX_COPY_PREFETCH 4
+#endif
+
+#define L1_CACHE_BYTES L1_CACHE_LINE_SIZE
+#define L1_CACHE_SHIFT LG_L1_CACHE_LINE_SIZE
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
+
+#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define L1_CACHE_PAGES 8
+
+#ifndef __ASSEMBLY__
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_all(void);
+#endif /* __ASSEMBLY__ */
+
+/* prep registers for L2 */
+#define CACHECRBA 0x80000823 /* Cache configuration register address */
+#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */
+#define L2CACHE_512KB 0x00 /* 512KB */
+#define L2CACHE_256KB 0x01 /* 256KB */
+#define L2CACHE_1MB 0x02 /* 1MB */
+#define L2CACHE_NONE 0x03 /* NONE */
+#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */
+
+#ifdef CONFIG_8xx
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST 560 /* Instruction cache control/status */
+#define SPRN_IC_ADR 561 /* Address needed for some commands */
+#define SPRN_IC_DAT 562 /* Read-only data register */
+#define SPRN_DC_CST 568 /* Data cache control/status */
+#define SPRN_DC_ADR 569 /* Address needed for some commands */
+#define SPRN_DC_DAT 570 /* Read-only data register */
+
+/* Commands. Only the first few are available to the instruction cache.
+*/
+#define IDC_ENABLE 0x02000000 /* Cache enable */
+#define IDC_DISABLE 0x04000000 /* Cache disable */
+#define IDC_LDLCK 0x06000000 /* Load and lock */
+#define IDC_UNLINE 0x08000000 /* Unlock line */
+#define IDC_UNALL 0x0a000000 /* Unlock all */
+#define IDC_INVALL 0x0c000000 /* Invalidate all */
+
+#define DC_FLINE 0x0e000000 /* Flush data cache line */
+#define DC_SFWT 0x01000000 /* Set forced writethrough mode */
+#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
+#define DC_SLES 0x05000000 /* Set little endian swap mode */
+#define DC_CLES 0x07000000 /* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED 0x80000000 /* Cache is enabled */
+#define IDC_CERR1 0x00200000 /* Cache error 1 */
+#define IDC_CERR2 0x00100000 /* Cache error 2 */
+#define IDC_CERR3 0x00080000 /* Cache error 3 */
+
+#define DC_DFWT 0x40000000 /* Data cache is forced write through */
+#define DC_LES 0x20000000 /* Caches are little endian mode */
+#endif /* CONFIG_8xx */
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/cacheflush.h b/include/asm-ppc/cacheflush.h
new file mode 100644
index 0000000..6a243ef
--- /dev/null
+++ b/include/asm-ppc/cacheflush.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-ppc/cacheflush.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_CACHEFLUSH_H
+#define _PPC_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * No cache flushing is required when address mappings are
+ * changed, because the caches on PowerPCs are physically
+ * addressed. -- paulus
+ * Also, when SMP we use the coherency (M) bit of the
+ * BATs and PTEs. -- Cort
+ */
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_range(vma, a, b) do { } while (0)
+#define flush_cache_page(vma, p, pfn) do { } while (0)
+#define flush_icache_page(vma, page) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+extern void flush_dcache_page(struct page *page);
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+extern void flush_icache_range(unsigned long, unsigned long);
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+ struct page *page, unsigned long addr, int len);
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+ flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+extern void __flush_dcache_icache(void *page_va);
+extern void __flush_dcache_icache_phys(unsigned long physaddr);
+extern void flush_dcache_icache_page(struct page *page);
+#endif /* _PPC_CACHEFLUSH_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/checksum.h b/include/asm-ppc/checksum.h
new file mode 100644
index 0000000..cf953a9
--- /dev/null
+++ b/include/asm-ppc/checksum.h
@@ -0,0 +1,107 @@
+#ifdef __KERNEL__
+#ifndef _PPC_CHECKSUM_H
+#define _PPC_CHECKSUM_H
+
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial(const unsigned char * buff, int len,
+ unsigned int sum);
+
+/*
+ * Computes the checksum of a memory block at src, length len,
+ * and adds in "sum" (32-bit), while copying the block to dst.
+ * If an access exception occurs on src or dst, it stores -EFAULT
+ * to *src_err or *dst_err respectively (if that pointer is not
+ * NULL), and, for an error on src, zeroes the rest of dst.
+ *
+ * Like csum_partial, this must be called with even lengths,
+ * except for the last fragment.
+ */
+extern unsigned int csum_partial_copy_generic(const char *src, char *dst,
+ int len, unsigned int sum,
+ int *src_err, int *dst_err);
+
+#define csum_partial_copy_from_user(src, dst, len, sum, errp) \
+ csum_partial_copy_generic((__force void *)(src), (dst), (len), (sum), (errp), NULL)
+
+/* FIXME: this needs to be written to really do no check -- Cort */
+#define csum_partial_copy_nocheck(src, dst, len, sum) \
+ csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
+
+/*
+ * turns a 32-bit partial checksum (e.g. from csum_partial) into a
+ * 1's complement 16-bit checksum.
+ */
+static inline unsigned int csum_fold(unsigned int sum)
+{
+ unsigned int tmp;
+
+ /* swap the two 16-bit halves of sum */
+ __asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum));
+ /* if there is a carry from adding the two 16-bit halves,
+ it will carry from the lower half into the upper half,
+ giving us the correct sum in the upper half. */
+ sum = ~(sum + tmp) >> 16;
+ return sum;
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
+{
+ return csum_fold(csum_partial(buff, len, 0));
+}
+
+/*
+ * FIXME: I swiped this one from the sparc and made minor modifications.
+ * It may not be correct. -- Cort
+ */
+static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ unsigned int sum)
+{
+ __asm__("\n\
+ addc %0,%0,%1 \n\
+ adde %0,%0,%2 \n\
+ adde %0,%0,%3 \n\
+ addze %0,%0 \n\
+ "
+ : "=r" (sum)
+ : "r" (daddr), "r"(saddr), "r"((proto<<16)+len), "0"(sum));
+ return sum;
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries. ihl is the number
+ * of 32-bit words and is always >= 5.
+ */
+extern unsigned short ip_fast_csum(unsigned char * iph, unsigned int ihl);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern unsigned short csum_tcpudp_magic(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ unsigned int sum);
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h
new file mode 100644
index 0000000..5bbb8e2
--- /dev/null
+++ b/include/asm-ppc/commproc.h
@@ -0,0 +1,695 @@
+/*
+ * MPC8xx Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels. Some CPM control and status is available
+ * throught the MPC8xx internal memory map. See immap.h for details.
+ * This file only contains what I need for the moment, not the total
+ * CPM capabilities. I (or someone else) will add definitions as they
+ * are needed. -- Dan
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space. The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_8XX__
+#define __CPM_8XX__
+
+#include <linux/config.h>
+#include <asm/8xx_immap.h>
+#include <asm/ptrace.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST ((ushort)0x8000)
+#define CPM_CR_OPCODE ((ushort)0x0f00)
+#define CPM_CR_CHAN ((ushort)0x00f0)
+#define CPM_CR_FLG ((ushort)0x0001)
+
+/* Some commands (there are more...later)
+*/
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+#define CPM_CR_SET_TIMER CPM_CR_SET_GADDR
+
+/* Channel numbers.
+*/
+#define CPM_CR_CH_SCC1 ((ushort)0x0000)
+#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
+#define CPM_CR_CH_SCC2 ((ushort)0x0004)
+#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */
+#define CPM_CR_CH_TIMER CPM_CR_CH_SPI
+#define CPM_CR_CH_SCC3 ((ushort)0x0008)
+#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
+#define CPM_CR_CH_SCC4 ((ushort)0x000c)
+#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
+
+#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
+
+/* The dual ported RAM is multi-functional. Some areas can be (and are
+ * being) used for microcode. There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+#define CPM_DATAONLY_BASE ((uint)0x0800)
+#define CPM_DATAONLY_SIZE ((uint)0x0700)
+#define CPM_DP_NOSPACE ((uint)0x7fffffff)
+
+static inline long IS_DPERR(const uint offset)
+{
+ return (uint)offset > (uint)-1000L;
+}
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm8xx_t *cpmp; /* Pointer to comm processor */
+extern uint cpm_dpalloc(uint size, uint align);
+extern int cpm_dpfree(uint offset);
+extern uint cpm_dpalloc_fixed(uint offset, uint size, uint align);
+extern void cpm_dpdump(void);
+extern void *cpm_dpram_addr(uint offset);
+extern void cpm_setbrg(uint brg, uint rate);
+
+extern uint m8xx_cpm_hostalloc(uint size);
+extern int m8xx_cpm_hostfree(uint start);
+extern void m8xx_cpm_hostdump(void);
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
+#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
+#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_NAK ((ushort)0x0004) /* NAK - did not respond */
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_UN ((ushort)0x0002) /* Underrun */
+#define BD_SC_CD ((ushort)0x0001) /* ?? */
+#define BD_SC_CL ((ushort)0x0001) /* Collision */
+
+/* Parameter RAM offsets.
+*/
+#define PROFF_SCC1 ((uint)0x0000)
+#define PROFF_IIC ((uint)0x0080)
+#define PROFF_SCC2 ((uint)0x0100)
+#define PROFF_SPI ((uint)0x0180)
+#define PROFF_SCC3 ((uint)0x0200)
+#define PROFF_SMC1 ((uint)0x0280)
+#define PROFF_SCC4 ((uint)0x0300)
+#define PROFF_SMC2 ((uint)0x0380)
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+ ushort smc_rbase; /* Rx Buffer descriptor base address */
+ ushort smc_tbase; /* Tx Buffer descriptor base address */
+ u_char smc_rfcr; /* Rx function code */
+ u_char smc_tfcr; /* Tx function code */
+ ushort smc_mrblr; /* Max receive buffer length */
+ uint smc_rstate; /* Internal */
+ uint smc_idp; /* Internal */
+ ushort smc_rbptr; /* Internal */
+ ushort smc_ibc; /* Internal */
+ uint smc_rxtmp; /* Internal */
+ uint smc_tstate; /* Internal */
+ uint smc_tdp; /* Internal */
+ ushort smc_tbptr; /* Internal */
+ ushort smc_tbc; /* Internal */
+ uint smc_txtmp; /* Internal */
+ ushort smc_maxidl; /* Maximum idle characters */
+ ushort smc_tmpidl; /* Temporary idle counter */
+ ushort smc_brklen; /* Last received break length */
+ ushort smc_brkec; /* rcv'd break condition counter */
+ ushort smc_brkcr; /* xmt break count register */
+ ushort smc_rmask; /* Temporary bit mask */
+ char res1[8]; /* Reserved */
+ ushort smc_rpbase; /* Relocation pointer */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define SMCMR_REN ((ushort)0x0001)
+#define SMCMR_TEN ((ushort)0x0002)
+#define SMCMR_DM ((ushort)0x000c)
+#define SMCMR_SM_GCI ((ushort)0x0000)
+#define SMCMR_SM_UART ((ushort)0x0020)
+#define SMCMR_SM_TRANS ((ushort)0x0030)
+#define SMCMR_SM_MASK ((ushort)0x0030)
+#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
+#define SMCMR_REVD SMCMR_PM_EVEN
+#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
+#define SMCMR_BS SMCMR_PEN
+#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
+#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer. It is half duplex, in that
+ * it can only receive or transmit. The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+ ushort scent_rbase;
+ ushort scent_tbase;
+ u_char scent_cfcr;
+ u_char scent_smask;
+ ushort scent_mrblr;
+ uint scent_rstate;
+ uint scent_r_ptr;
+ ushort scent_rbptr;
+ ushort scent_r_cnt;
+ uint scent_rtemp;
+ uint scent_tstate;
+ uint scent_t_ptr;
+ ushort scent_tbptr;
+ ushort scent_t_cnt;
+ uint scent_ttemp;
+ ushort scent_max_sl;
+ ushort scent_sl_cnt;
+ ushort scent_character1;
+ ushort scent_character2;
+ ushort scent_character3;
+ ushort scent_character4;
+ ushort scent_character5;
+ ushort scent_character6;
+ ushort scent_character7;
+ ushort scent_character8;
+ ushort scent_rccm;
+ ushort scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F ((u_char)0x08)
+#define SMC_CENT_PE ((u_char)0x04)
+#define SMC_CENT_S ((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
+#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
+#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
+#define SMCM_BSY ((unsigned char)0x04)
+#define SMCM_TX ((unsigned char)0x02)
+#define SMCM_RX ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+/* SI Clock Route Register
+*/
+#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
+#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
+#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
+#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
+#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
+#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
+#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
+#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP ((uint)0x00040000)
+#define SCC_GSMRH_GDE ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
+#define SCC_GSMRH_REVD ((uint)0x00002000)
+#define SCC_GSMRH_TRX ((uint)0x00001000)
+#define SCC_GSMRH_TTX ((uint)0x00000800)
+#define SCC_GSMRH_CDP ((uint)0x00000400)
+#define SCC_GSMRH_CTSP ((uint)0x00000200)
+#define SCC_GSMRH_CDS ((uint)0x00000100)
+#define SCC_GSMRH_CTSS ((uint)0x00000080)
+#define SCC_GSMRH_TFL ((uint)0x00000040)
+#define SCC_GSMRH_RFW ((uint)0x00000020)
+#define SCC_GSMRH_TXSY ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
+#define SCC_GSMRH_RTSM ((uint)0x00000002)
+#define SCC_GSMRH_RSYN ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
+#define SCC_GSMRL_TCI ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
+#define SCC_GSMRL_RINV ((uint)0x02000000)
+#define SCC_GSMRL_TINV ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
+#define SCC_GSMRL_TEND ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
+#define SCC_GSMRL_ENR ((uint)0x00000020)
+#define SCC_GSMRL_ENT ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a)
+#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
+
+#define SCC_TODR_TOD ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE ((unsigned char)0x10)
+#define SCCM_BSY ((unsigned char)0x04)
+#define SCCM_TX ((unsigned char)0x02)
+#define SCCM_RX ((unsigned char)0x01)
+
+typedef struct scc_param {
+ ushort scc_rbase; /* Rx Buffer descriptor base address */
+ ushort scc_tbase; /* Tx Buffer descriptor base address */
+ u_char scc_rfcr; /* Rx function code */
+ u_char scc_tfcr; /* Tx function code */
+ ushort scc_mrblr; /* Max receive buffer length */
+ uint scc_rstate; /* Internal */
+ uint scc_idp; /* Internal */
+ ushort scc_rbptr; /* Internal */
+ ushort scc_ibc; /* Internal */
+ uint scc_rxtmp; /* Internal */
+ uint scc_tstate; /* Internal */
+ uint scc_tdp; /* Internal */
+ ushort scc_tbptr; /* Internal */
+ ushort scc_tbc; /* Internal */
+ uint scc_txtmp; /* Internal */
+ uint scc_rcrc; /* Internal */
+ uint scc_tcrc; /* Internal */
+} sccp_t;
+
+/* Function code bits.
+*/
+#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
+
+/* CPM Ethernet through SCCx.
+ */
+typedef struct scc_enet {
+ sccp_t sen_genscc;
+ uint sen_cpres; /* Preset CRC */
+ uint sen_cmask; /* Constant mask for CRC */
+ uint sen_crcec; /* CRC Error counter */
+ uint sen_alec; /* alignment error counter */
+ uint sen_disfc; /* discard frame counter */
+ ushort sen_pads; /* Tx short frame pad character */
+ ushort sen_retlim; /* Retry limit threshold */
+ ushort sen_retcnt; /* Retry limit counter */
+ ushort sen_maxflr; /* maximum frame length register */
+ ushort sen_minflr; /* minimum frame length register */
+ ushort sen_maxd1; /* maximum DMA1 length */
+ ushort sen_maxd2; /* maximum DMA2 length */
+ ushort sen_maxd; /* Rx max DMA */
+ ushort sen_dmacnt; /* Rx DMA counter */
+ ushort sen_maxb; /* Max BD byte count */
+ ushort sen_gaddr1; /* Group address filter */
+ ushort sen_gaddr2;
+ ushort sen_gaddr3;
+ ushort sen_gaddr4;
+ uint sen_tbuf0data0; /* Save area 0 - current frame */
+ uint sen_tbuf0data1; /* Save area 1 - current frame */
+ uint sen_tbuf0rba; /* Internal */
+ uint sen_tbuf0crc; /* Internal */
+ ushort sen_tbuf0bcnt; /* Internal */
+ ushort sen_paddrh; /* physical address (MSB) */
+ ushort sen_paddrm;
+ ushort sen_paddrl; /* physical address (LSB) */
+ ushort sen_pper; /* persistence */
+ ushort sen_rfbdptr; /* Rx first BD pointer */
+ ushort sen_tfbdptr; /* Tx first BD pointer */
+ ushort sen_tlbdptr; /* Tx last BD pointer */
+ uint sen_tbuf1data0; /* Save area 0 - current frame */
+ uint sen_tbuf1data1; /* Save area 1 - current frame */
+ uint sen_tbuf1rba; /* Internal */
+ uint sen_tbuf1crc; /* Internal */
+ ushort sen_tbuf1bcnt; /* Internal */
+ ushort sen_txlen; /* Tx Frame length counter */
+ ushort sen_iaddr1; /* Individual address filter */
+ ushort sen_iaddr2;
+ ushort sen_iaddr3;
+ ushort sen_iaddr4;
+ ushort sen_boffcnt; /* Backoff counter */
+
+ /* NOTE: Some versions of the manual have the following items
+ * incorrectly documented. Below is the proper order.
+ */
+ ushort sen_taddrh; /* temp address (MSB) */
+ ushort sen_taddrm;
+ ushort sen_taddrl; /* temp address (LSB) */
+} scc_enet_t;
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
+#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
+#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
+#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
+#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
+#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
+#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
+#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
+#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
+#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
+#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
+#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
+#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
+#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY ((ushort)0x8000)
+#define BD_ENET_RX_WRAP ((ushort)0x2000)
+#define BD_ENET_RX_INTR ((ushort)0x1000)
+#define BD_ENET_RX_LAST ((ushort)0x0800)
+#define BD_ENET_RX_FIRST ((ushort)0x0400)
+#define BD_ENET_RX_MISS ((ushort)0x0100)
+#define BD_ENET_RX_LG ((ushort)0x0020)
+#define BD_ENET_RX_NO ((ushort)0x0010)
+#define BD_ENET_RX_SH ((ushort)0x0008)
+#define BD_ENET_RX_CR ((ushort)0x0004)
+#define BD_ENET_RX_OV ((ushort)0x0002)
+#define BD_ENET_RX_CL ((ushort)0x0001)
+#define BD_ENET_RX_BC ((ushort)0x0080) /* DA is Broadcast */
+#define BD_ENET_RX_MC ((ushort)0x0040) /* DA is Multicast */
+#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY ((ushort)0x8000)
+#define BD_ENET_TX_PAD ((ushort)0x4000)
+#define BD_ENET_TX_WRAP ((ushort)0x2000)
+#define BD_ENET_TX_INTR ((ushort)0x1000)
+#define BD_ENET_TX_LAST ((ushort)0x0800)
+#define BD_ENET_TX_TC ((ushort)0x0400)
+#define BD_ENET_TX_DEF ((ushort)0x0200)
+#define BD_ENET_TX_HB ((ushort)0x0100)
+#define BD_ENET_TX_LC ((ushort)0x0080)
+#define BD_ENET_TX_RL ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK ((ushort)0x003c)
+#define BD_ENET_TX_UN ((ushort)0x0002)
+#define BD_ENET_TX_CSL ((ushort)0x0001)
+#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+ sccp_t scc_genscc;
+ char res1[8]; /* Reserved */
+ ushort scc_maxidl; /* Maximum idle chars */
+ ushort scc_idlc; /* temp idle counter */
+ ushort scc_brkcr; /* Break count register */
+ ushort scc_parec; /* receive parity error counter */
+ ushort scc_frmec; /* receive framing error counter */
+ ushort scc_nosec; /* receive noise counter */
+ ushort scc_brkec; /* receive break condition counter */
+ ushort scc_brkln; /* last received break length */
+ ushort scc_uaddr1; /* UART address character 1 */
+ ushort scc_uaddr2; /* UART address character 2 */
+ ushort scc_rtemp; /* Temp storage */
+ ushort scc_toseq; /* Transmit out of sequence char */
+ ushort scc_char1; /* control character 1 */
+ ushort scc_char2; /* control character 2 */
+ ushort scc_char3; /* control character 3 */
+ ushort scc_char4; /* control character 4 */
+ ushort scc_char5; /* control character 5 */
+ ushort scc_char6; /* control character 6 */
+ ushort scc_char7; /* control character 7 */
+ ushort scc_char8; /* control character 8 */
+ ushort scc_rccm; /* receive control character mask */
+ ushort scc_rccr; /* receive control character register */
+ ushort scc_rlbc; /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR ((ushort)0x1000)
+#define UART_SCCM_GLT ((ushort)0x0800)
+#define UART_SCCM_AB ((ushort)0x0200)
+#define UART_SCCM_IDL ((ushort)0x0100)
+#define UART_SCCM_GRA ((ushort)0x0080)
+#define UART_SCCM_BRKE ((ushort)0x0040)
+#define UART_SCCM_BRKS ((ushort)0x0020)
+#define UART_SCCM_CCR ((ushort)0x0008)
+#define UART_SCCM_BSY ((ushort)0x0004)
+#define UART_SCCM_TX ((ushort)0x0002)
+#define UART_SCCM_RX ((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PSMR_FLC ((ushort)0x8000)
+#define SCU_PSMR_SL ((ushort)0x4000)
+#define SCU_PSMR_CL ((ushort)0x3000)
+#define SCU_PSMR_UM ((ushort)0x0c00)
+#define SCU_PSMR_FRZ ((ushort)0x0200)
+#define SCU_PSMR_RZS ((ushort)0x0100)
+#define SCU_PSMR_SYN ((ushort)0x0080)
+#define SCU_PSMR_DRT ((ushort)0x0040)
+#define SCU_PSMR_PEN ((ushort)0x0010)
+#define SCU_PSMR_RPM ((ushort)0x000c)
+#define SCU_PSMR_REVP ((ushort)0x0008)
+#define SCU_PSMR_TPM ((ushort)0x0003)
+#define SCU_PSMR_TEVP ((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+ sccp_t st_genscc;
+ uint st_cpres; /* Preset CRC */
+ uint st_cmask; /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST ((ushort)0x0800)
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+ ushort iic_rbase; /* Rx Buffer descriptor base address */
+ ushort iic_tbase; /* Tx Buffer descriptor base address */
+ u_char iic_rfcr; /* Rx function code */
+ u_char iic_tfcr; /* Tx function code */
+ ushort iic_mrblr; /* Max receive buffer length */
+ uint iic_rstate; /* Internal */
+ uint iic_rdp; /* Internal */
+ ushort iic_rbptr; /* Internal */
+ ushort iic_rbc; /* Internal */
+ uint iic_rxtmp; /* Internal */
+ uint iic_tstate; /* Internal */
+ uint iic_tdp; /* Internal */
+ ushort iic_tbptr; /* Internal */
+ ushort iic_tbc; /* Internal */
+ uint iic_txtmp; /* Internal */
+ char res1[4]; /* Reserved */
+ ushort iic_rpbase; /* Relocation pointer */
+ char res2[2]; /* Reserved */
+} iic_t;
+
+#define BD_IIC_START ((ushort)0x0400)
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+ ushort spi_rbase; /* Rx Buffer descriptor base address */
+ ushort spi_tbase; /* Tx Buffer descriptor base address */
+ u_char spi_rfcr; /* Rx function code */
+ u_char spi_tfcr; /* Tx function code */
+ ushort spi_mrblr; /* Max receive buffer length */
+ uint spi_rstate; /* Internal */
+ uint spi_rdp; /* Internal */
+ ushort spi_rbptr; /* Internal */
+ ushort spi_rbc; /* Internal */
+ uint spi_rxtmp; /* Internal */
+ uint spi_tstate; /* Internal */
+ uint spi_tdp; /* Internal */
+ ushort spi_tbptr; /* Internal */
+ ushort spi_tbc; /* Internal */
+ uint spi_txtmp; /* Internal */
+ uint spi_res;
+ ushort spi_rpbase; /* Relocation pointer */
+ ushort spi_res2;
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
+#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
+#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
+#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
+#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
+#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
+#define SPMODE_EN ((ushort)0x0100) /* Enable */
+#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
+#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */
+#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */
+#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */
+#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
+
+/* SPIE fields */
+#define SPIE_MME 0x20
+#define SPIE_TXE 0x10
+#define SPIE_BSY 0x04
+#define SPIE_TXB 0x02
+#define SPIE_RXB 0x01
+
+/*
+ * RISC Controller Configuration Register definitons
+ */
+#define RCCR_TIME 0x8000 /* RISC Timer Enable */
+#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */
+#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */
+
+/* RISC Timer Parameter RAM offset */
+#define PROFF_RTMR ((uint)0x01B0)
+
+typedef struct risc_timer_pram {
+ unsigned short tm_base; /* RISC Timer Table Base Address */
+ unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */
+ unsigned short r_tmr; /* RISC Timer Mode Register */
+ unsigned short r_tmv; /* RISC Timer Valid Register */
+ unsigned long tm_cmd; /* RISC Timer Command Register */
+ unsigned long tm_cnt; /* RISC Timer Internal Count */
+} rt_pram_t;
+
+/* Bits in RISC Timer Command Register */
+#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */
+#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */
+#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */
+#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */
+#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */
+
+/* CPM interrupts. There are nearly 32 interrupts generated by CPM
+ * channels or devices. All of these are presented to the PPC core
+ * as a single interrupt. The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler. We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+#define CPMVEC_NR 32
+#define CPMVEC_PIO_PC15 ((ushort)0x1f)
+#define CPMVEC_SCC1 ((ushort)0x1e)
+#define CPMVEC_SCC2 ((ushort)0x1d)
+#define CPMVEC_SCC3 ((ushort)0x1c)
+#define CPMVEC_SCC4 ((ushort)0x1b)
+#define CPMVEC_PIO_PC14 ((ushort)0x1a)
+#define CPMVEC_TIMER1 ((ushort)0x19)
+#define CPMVEC_PIO_PC13 ((ushort)0x18)
+#define CPMVEC_PIO_PC12 ((ushort)0x17)
+#define CPMVEC_SDMA_CB_ERR ((ushort)0x16)
+#define CPMVEC_IDMA1 ((ushort)0x15)
+#define CPMVEC_IDMA2 ((ushort)0x14)
+#define CPMVEC_TIMER2 ((ushort)0x12)
+#define CPMVEC_RISCTIMER ((ushort)0x11)
+#define CPMVEC_I2C ((ushort)0x10)
+#define CPMVEC_PIO_PC11 ((ushort)0x0f)
+#define CPMVEC_PIO_PC10 ((ushort)0x0e)
+#define CPMVEC_TIMER3 ((ushort)0x0c)
+#define CPMVEC_PIO_PC9 ((ushort)0x0b)
+#define CPMVEC_PIO_PC8 ((ushort)0x0a)
+#define CPMVEC_PIO_PC7 ((ushort)0x09)
+#define CPMVEC_TIMER4 ((ushort)0x07)
+#define CPMVEC_PIO_PC6 ((ushort)0x06)
+#define CPMVEC_SPI ((ushort)0x05)
+#define CPMVEC_SMC1 ((ushort)0x04)
+#define CPMVEC_SMC2 ((ushort)0x03)
+#define CPMVEC_PIO_PC5 ((ushort)0x02)
+#define CPMVEC_PIO_PC4 ((ushort)0x01)
+#define CPMVEC_ERROR ((ushort)0x00)
+
+/* CPM interrupt configuration vector.
+*/
+#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
+#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
+#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
+#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
+#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
+#define CICR_IEN ((uint)0x00000080) /* Int. enable */
+#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
+
+extern void cpm_install_handler(int vec,
+ void (*handler)(void *, struct pt_regs *regs), void *dev_id);
+extern void cpm_free_handler(int vec);
+
+#endif /* __CPM_8XX__ */
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
new file mode 100644
index 0000000..42fd106
--- /dev/null
+++ b/include/asm-ppc/cpm2.h
@@ -0,0 +1,1045 @@
+/*
+ * Communication Processor Module v2.
+ *
+ * This file contains structures and information for the communication
+ * processor channels found in the dual port RAM or parameter RAM.
+ * All CPM control and status is available through the CPM2 internal
+ * memory map. See immap_cpm2.h for details.
+ */
+#ifdef __KERNEL__
+#ifndef __CPM2__
+#define __CPM2__
+
+#include <asm/immap_cpm2.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST ((uint)0x80000000)
+#define CPM_CR_PAGE ((uint)0x7c000000)
+#define CPM_CR_SBLOCK ((uint)0x03e00000)
+#define CPM_CR_FLG ((uint)0x00010000)
+#define CPM_CR_MCN ((uint)0x00003fc0)
+#define CPM_CR_OPCODE ((uint)0x0000000f)
+
+/* Device sub-block and page codes.
+*/
+#define CPM_CR_SCC1_SBLOCK (0x04)
+#define CPM_CR_SCC2_SBLOCK (0x05)
+#define CPM_CR_SCC3_SBLOCK (0x06)
+#define CPM_CR_SCC4_SBLOCK (0x07)
+#define CPM_CR_SMC1_SBLOCK (0x08)
+#define CPM_CR_SMC2_SBLOCK (0x09)
+#define CPM_CR_SPI_SBLOCK (0x0a)
+#define CPM_CR_I2C_SBLOCK (0x0b)
+#define CPM_CR_TIMER_SBLOCK (0x0f)
+#define CPM_CR_RAND_SBLOCK (0x0e)
+#define CPM_CR_FCC1_SBLOCK (0x10)
+#define CPM_CR_FCC2_SBLOCK (0x11)
+#define CPM_CR_FCC3_SBLOCK (0x12)
+#define CPM_CR_IDMA1_SBLOCK (0x14)
+#define CPM_CR_IDMA2_SBLOCK (0x15)
+#define CPM_CR_IDMA3_SBLOCK (0x16)
+#define CPM_CR_IDMA4_SBLOCK (0x17)
+#define CPM_CR_MCC1_SBLOCK (0x1c)
+
+#define CPM_CR_SCC1_PAGE (0x00)
+#define CPM_CR_SCC2_PAGE (0x01)
+#define CPM_CR_SCC3_PAGE (0x02)
+#define CPM_CR_SCC4_PAGE (0x03)
+#define CPM_CR_SMC1_PAGE (0x07)
+#define CPM_CR_SMC2_PAGE (0x08)
+#define CPM_CR_SPI_PAGE (0x09)
+#define CPM_CR_I2C_PAGE (0x0a)
+#define CPM_CR_TIMER_PAGE (0x0a)
+#define CPM_CR_RAND_PAGE (0x0a)
+#define CPM_CR_FCC1_PAGE (0x04)
+#define CPM_CR_FCC2_PAGE (0x05)
+#define CPM_CR_FCC3_PAGE (0x06)
+#define CPM_CR_IDMA1_PAGE (0x07)
+#define CPM_CR_IDMA2_PAGE (0x08)
+#define CPM_CR_IDMA3_PAGE (0x09)
+#define CPM_CR_IDMA4_PAGE (0x0a)
+#define CPM_CR_MCC1_PAGE (0x07)
+#define CPM_CR_MCC2_PAGE (0x08)
+
+/* Some opcodes (there are more...later)
+*/
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+#define CPM_CR_START_IDMA ((ushort)0x0009)
+#define CPM_CR_STOP_IDMA ((ushort)0x000b)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+ ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+/* Dual Port RAM addresses. The first 16K is available for almost
+ * any CPM use, so we put the BDs there. The first 128 bytes are
+ * used for SMC1 and SMC2 parameter RAM, so we start allocating
+ * BDs above that. All of this must change when we start
+ * downloading RAM microcode.
+ */
+#define CPM_DATAONLY_BASE ((uint)128)
+#define CPM_DP_NOSPACE ((uint)0x7fffffff)
+#if defined(CONFIG_8272) || defined(CONFIG_MPC8555)
+#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000)
+#else
+#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000)
+#endif
+
+/* The number of pages of host memory we allocate for CPM. This is
+ * done early in kernel initialization to get physically contiguous
+ * pages.
+ */
+#define NUM_CPM_HOST_PAGES 2
+
+static inline long IS_DPERR(const uint offset)
+{
+ return (uint)offset > (uint)-1000L;
+}
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm_cpm2_t *cpmp; /* Pointer to comm processor */
+extern uint cpm_dpalloc(uint size, uint align);
+extern int cpm_dpfree(uint offset);
+extern uint cpm_dpalloc_fixed(uint offset, uint size, uint align);
+extern void cpm_dpdump(void);
+extern void *cpm_dpram_addr(uint offset);
+extern void cpm_setbrg(uint brg, uint rate);
+extern void cpm2_fastbrg(uint brg, uint rate, int div16);
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
+#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_CD ((ushort)0x0001) /* ?? */
+
+/* Function code bits, usually generic to devices.
+*/
+#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
+#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
+#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
+#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
+#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
+
+/* Parameter RAM offsets from the base.
+*/
+#define PROFF_SCC1 ((uint)0x8000)
+#define PROFF_SCC2 ((uint)0x8100)
+#define PROFF_SCC3 ((uint)0x8200)
+#define PROFF_SCC4 ((uint)0x8300)
+#define PROFF_FCC1 ((uint)0x8400)
+#define PROFF_FCC2 ((uint)0x8500)
+#define PROFF_FCC3 ((uint)0x8600)
+#define PROFF_MCC1 ((uint)0x8700)
+#define PROFF_SMC1_BASE ((uint)0x87fc)
+#define PROFF_IDMA1_BASE ((uint)0x87fe)
+#define PROFF_MCC2 ((uint)0x8800)
+#define PROFF_SMC2_BASE ((uint)0x88fc)
+#define PROFF_IDMA2_BASE ((uint)0x88fe)
+#define PROFF_SPI_BASE ((uint)0x89fc)
+#define PROFF_IDMA3_BASE ((uint)0x89fe)
+#define PROFF_TIMERS ((uint)0x8ae0)
+#define PROFF_REVNUM ((uint)0x8af0)
+#define PROFF_RAND ((uint)0x8af8)
+#define PROFF_I2C_BASE ((uint)0x8afc)
+#define PROFF_IDMA4_BASE ((uint)0x8afe)
+
+/* The SMCs are relocated to any of the first eight DPRAM pages.
+ * We will fix these at the first locations of DPRAM, until we
+ * get some microcode patches :-).
+ * The parameter ram space for the SMCs is fifty-some bytes, and
+ * they are required to start on a 64 byte boundary.
+ */
+#define PROFF_SMC1 (0)
+#define PROFF_SMC2 (64)
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ */
+typedef struct smc_uart {
+ ushort smc_rbase; /* Rx Buffer descriptor base address */
+ ushort smc_tbase; /* Tx Buffer descriptor base address */
+ u_char smc_rfcr; /* Rx function code */
+ u_char smc_tfcr; /* Tx function code */
+ ushort smc_mrblr; /* Max receive buffer length */
+ uint smc_rstate; /* Internal */
+ uint smc_idp; /* Internal */
+ ushort smc_rbptr; /* Internal */
+ ushort smc_ibc; /* Internal */
+ uint smc_rxtmp; /* Internal */
+ uint smc_tstate; /* Internal */
+ uint smc_tdp; /* Internal */
+ ushort smc_tbptr; /* Internal */
+ ushort smc_tbc; /* Internal */
+ uint smc_txtmp; /* Internal */
+ ushort smc_maxidl; /* Maximum idle characters */
+ ushort smc_tmpidl; /* Temporary idle counter */
+ ushort smc_brklen; /* Last received break length */
+ ushort smc_brkec; /* rcv'd break condition counter */
+ ushort smc_brkcr; /* xmt break count register */
+ ushort smc_rmask; /* Temporary bit mask */
+ uint smc_stmp; /* SDMA Temp */
+} smc_uart_t;
+
+/* SMC uart mode register (Internal memory map).
+*/
+#define SMCMR_REN ((ushort)0x0001)
+#define SMCMR_TEN ((ushort)0x0002)
+#define SMCMR_DM ((ushort)0x000c)
+#define SMCMR_SM_GCI ((ushort)0x0000)
+#define SMCMR_SM_UART ((ushort)0x0020)
+#define SMCMR_SM_TRANS ((ushort)0x0030)
+#define SMCMR_SM_MASK ((ushort)0x0030)
+#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
+#define SMCMR_REVD SMCMR_PM_EVEN
+#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
+#define SMCMR_BS SMCMR_PEN
+#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
+#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
+#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
+#define SMCM_TXE ((unsigned char)0x10)
+#define SMCM_BSY ((unsigned char)0x04)
+#define SMCM_TX ((unsigned char)0x02)
+#define SMCM_RX ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP ((uint)0x00040000)
+#define SCC_GSMRH_GDE ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
+#define SCC_GSMRH_REVD ((uint)0x00002000)
+#define SCC_GSMRH_TRX ((uint)0x00001000)
+#define SCC_GSMRH_TTX ((uint)0x00000800)
+#define SCC_GSMRH_CDP ((uint)0x00000400)
+#define SCC_GSMRH_CTSP ((uint)0x00000200)
+#define SCC_GSMRH_CDS ((uint)0x00000100)
+#define SCC_GSMRH_CTSS ((uint)0x00000080)
+#define SCC_GSMRH_TFL ((uint)0x00000040)
+#define SCC_GSMRH_RFW ((uint)0x00000020)
+#define SCC_GSMRH_TXSY ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
+#define SCC_GSMRH_RTSM ((uint)0x00000002)
+#define SCC_GSMRH_RSYN ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
+#define SCC_GSMRL_TCI ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
+#define SCC_GSMRL_RINV ((uint)0x02000000)
+#define SCC_GSMRL_TINV ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
+#define SCC_GSMRL_TEND ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
+#define SCC_GSMRL_ENR ((uint)0x00000020)
+#define SCC_GSMRL_ENT ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
+
+#define SCC_TODR_TOD ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE ((unsigned char)0x10)
+#define SCCM_BSY ((unsigned char)0x04)
+#define SCCM_TX ((unsigned char)0x02)
+#define SCCM_RX ((unsigned char)0x01)
+
+typedef struct scc_param {
+ ushort scc_rbase; /* Rx Buffer descriptor base address */
+ ushort scc_tbase; /* Tx Buffer descriptor base address */
+ u_char scc_rfcr; /* Rx function code */
+ u_char scc_tfcr; /* Tx function code */
+ ushort scc_mrblr; /* Max receive buffer length */
+ uint scc_rstate; /* Internal */
+ uint scc_idp; /* Internal */
+ ushort scc_rbptr; /* Internal */
+ ushort scc_ibc; /* Internal */
+ uint scc_rxtmp; /* Internal */
+ uint scc_tstate; /* Internal */
+ uint scc_tdp; /* Internal */
+ ushort scc_tbptr; /* Internal */
+ ushort scc_tbc; /* Internal */
+ uint scc_txtmp; /* Internal */
+ uint scc_rcrc; /* Internal */
+ uint scc_tcrc; /* Internal */
+} sccp_t;
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+ sccp_t sen_genscc;
+ uint sen_cpres; /* Preset CRC */
+ uint sen_cmask; /* Constant mask for CRC */
+ uint sen_crcec; /* CRC Error counter */
+ uint sen_alec; /* alignment error counter */
+ uint sen_disfc; /* discard frame counter */
+ ushort sen_pads; /* Tx short frame pad character */
+ ushort sen_retlim; /* Retry limit threshold */
+ ushort sen_retcnt; /* Retry limit counter */
+ ushort sen_maxflr; /* maximum frame length register */
+ ushort sen_minflr; /* minimum frame length register */
+ ushort sen_maxd1; /* maximum DMA1 length */
+ ushort sen_maxd2; /* maximum DMA2 length */
+ ushort sen_maxd; /* Rx max DMA */
+ ushort sen_dmacnt; /* Rx DMA counter */
+ ushort sen_maxb; /* Max BD byte count */
+ ushort sen_gaddr1; /* Group address filter */
+ ushort sen_gaddr2;
+ ushort sen_gaddr3;
+ ushort sen_gaddr4;
+ uint sen_tbuf0data0; /* Save area 0 - current frame */
+ uint sen_tbuf0data1; /* Save area 1 - current frame */
+ uint sen_tbuf0rba; /* Internal */
+ uint sen_tbuf0crc; /* Internal */
+ ushort sen_tbuf0bcnt; /* Internal */
+ ushort sen_paddrh; /* physical address (MSB) */
+ ushort sen_paddrm;
+ ushort sen_paddrl; /* physical address (LSB) */
+ ushort sen_pper; /* persistence */
+ ushort sen_rfbdptr; /* Rx first BD pointer */
+ ushort sen_tfbdptr; /* Tx first BD pointer */
+ ushort sen_tlbdptr; /* Tx last BD pointer */
+ uint sen_tbuf1data0; /* Save area 0 - current frame */
+ uint sen_tbuf1data1; /* Save area 1 - current frame */
+ uint sen_tbuf1rba; /* Internal */
+ uint sen_tbuf1crc; /* Internal */
+ ushort sen_tbuf1bcnt; /* Internal */
+ ushort sen_txlen; /* Tx Frame length counter */
+ ushort sen_iaddr1; /* Individual address filter */
+ ushort sen_iaddr2;
+ ushort sen_iaddr3;
+ ushort sen_iaddr4;
+ ushort sen_boffcnt; /* Backoff counter */
+
+ /* NOTE: Some versions of the manual have the following items
+ * incorrectly documented. Below is the proper order.
+ */
+ ushort sen_taddrh; /* temp address (MSB) */
+ ushort sen_taddrm;
+ ushort sen_taddrl; /* temp address (LSB) */
+} scc_enet_t;
+
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
+#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
+#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
+#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
+#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
+#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
+#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
+#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
+#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
+#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
+#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
+#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
+#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
+#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY ((ushort)0x8000)
+#define BD_ENET_RX_WRAP ((ushort)0x2000)
+#define BD_ENET_RX_INTR ((ushort)0x1000)
+#define BD_ENET_RX_LAST ((ushort)0x0800)
+#define BD_ENET_RX_FIRST ((ushort)0x0400)
+#define BD_ENET_RX_MISS ((ushort)0x0100)
+#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
+#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
+#define BD_ENET_RX_LG ((ushort)0x0020)
+#define BD_ENET_RX_NO ((ushort)0x0010)
+#define BD_ENET_RX_SH ((ushort)0x0008)
+#define BD_ENET_RX_CR ((ushort)0x0004)
+#define BD_ENET_RX_OV ((ushort)0x0002)
+#define BD_ENET_RX_CL ((ushort)0x0001)
+#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY ((ushort)0x8000)
+#define BD_ENET_TX_PAD ((ushort)0x4000)
+#define BD_ENET_TX_WRAP ((ushort)0x2000)
+#define BD_ENET_TX_INTR ((ushort)0x1000)
+#define BD_ENET_TX_LAST ((ushort)0x0800)
+#define BD_ENET_TX_TC ((ushort)0x0400)
+#define BD_ENET_TX_DEF ((ushort)0x0200)
+#define BD_ENET_TX_HB ((ushort)0x0100)
+#define BD_ENET_TX_LC ((ushort)0x0080)
+#define BD_ENET_TX_RL ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK ((ushort)0x003c)
+#define BD_ENET_TX_UN ((ushort)0x0002)
+#define BD_ENET_TX_CSL ((ushort)0x0001)
+#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+ sccp_t scc_genscc;
+ uint scc_res1; /* Reserved */
+ uint scc_res2; /* Reserved */
+ ushort scc_maxidl; /* Maximum idle chars */
+ ushort scc_idlc; /* temp idle counter */
+ ushort scc_brkcr; /* Break count register */
+ ushort scc_parec; /* receive parity error counter */
+ ushort scc_frmec; /* receive framing error counter */
+ ushort scc_nosec; /* receive noise counter */
+ ushort scc_brkec; /* receive break condition counter */
+ ushort scc_brkln; /* last received break length */
+ ushort scc_uaddr1; /* UART address character 1 */
+ ushort scc_uaddr2; /* UART address character 2 */
+ ushort scc_rtemp; /* Temp storage */
+ ushort scc_toseq; /* Transmit out of sequence char */
+ ushort scc_char1; /* control character 1 */
+ ushort scc_char2; /* control character 2 */
+ ushort scc_char3; /* control character 3 */
+ ushort scc_char4; /* control character 4 */
+ ushort scc_char5; /* control character 5 */
+ ushort scc_char6; /* control character 6 */
+ ushort scc_char7; /* control character 7 */
+ ushort scc_char8; /* control character 8 */
+ ushort scc_rccm; /* receive control character mask */
+ ushort scc_rccr; /* receive control character register */
+ ushort scc_rlbc; /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR ((ushort)0x1000)
+#define UART_SCCM_GLT ((ushort)0x0800)
+#define UART_SCCM_AB ((ushort)0x0200)
+#define UART_SCCM_IDL ((ushort)0x0100)
+#define UART_SCCM_GRA ((ushort)0x0080)
+#define UART_SCCM_BRKE ((ushort)0x0040)
+#define UART_SCCM_BRKS ((ushort)0x0020)
+#define UART_SCCM_CCR ((ushort)0x0008)
+#define UART_SCCM_BSY ((ushort)0x0004)
+#define UART_SCCM_TX ((ushort)0x0002)
+#define UART_SCCM_RX ((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC ((ushort)0x8000)
+#define SCU_PSMR_SL ((ushort)0x4000)
+#define SCU_PSMR_CL ((ushort)0x3000)
+#define SCU_PSMR_UM ((ushort)0x0c00)
+#define SCU_PSMR_FRZ ((ushort)0x0200)
+#define SCU_PSMR_RZS ((ushort)0x0100)
+#define SCU_PSMR_SYN ((ushort)0x0080)
+#define SCU_PSMR_DRT ((ushort)0x0040)
+#define SCU_PSMR_PEN ((ushort)0x0010)
+#define SCU_PSMR_RPM ((ushort)0x000c)
+#define SCU_PSMR_REVP ((ushort)0x0008)
+#define SCU_PSMR_TPM ((ushort)0x0003)
+#define SCU_PSMR_TEVP ((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+ sccp_t st_genscc;
+ uint st_cpres; /* Preset CRC */
+ uint st_cmask; /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST ((ushort)0x0800)
+
+/* How about some FCCs.....
+*/
+#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
+#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
+#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
+#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
+#define FCC_GFMR_TCI ((uint)0x20000000)
+#define FCC_GFMR_TRX ((uint)0x10000000)
+#define FCC_GFMR_TTX ((uint)0x08000000)
+#define FCC_GFMR_TTX ((uint)0x08000000)
+#define FCC_GFMR_CDP ((uint)0x04000000)
+#define FCC_GFMR_CTSP ((uint)0x02000000)
+#define FCC_GFMR_CDS ((uint)0x01000000)
+#define FCC_GFMR_CTSS ((uint)0x00800000)
+#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
+#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
+#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
+#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
+#define FCC_GFMR_RTSM ((uint)0x00002000)
+#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
+#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
+#define FCC_GFMR_REVD ((uint)0x00000400)
+#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
+#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
+#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
+#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
+#define FCC_GFMR_ENR ((uint)0x00000020)
+#define FCC_GFMR_ENT ((uint)0x00000010)
+#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
+#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
+#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
+
+/* Generic FCC parameter ram.
+*/
+typedef struct fcc_param {
+ ushort fcc_riptr; /* Rx Internal temp pointer */
+ ushort fcc_tiptr; /* Tx Internal temp pointer */
+ ushort fcc_res1;
+ ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
+ uint fcc_rstate; /* Upper byte is Func code, must be set */
+ uint fcc_rbase; /* Receive BD base */
+ ushort fcc_rbdstat; /* RxBD status */
+ ushort fcc_rbdlen; /* RxBD down counter */
+ uint fcc_rdptr; /* RxBD internal data pointer */
+ uint fcc_tstate; /* Upper byte is Func code, must be set */
+ uint fcc_tbase; /* Transmit BD base */
+ ushort fcc_tbdstat; /* TxBD status */
+ ushort fcc_tbdlen; /* TxBD down counter */
+ uint fcc_tdptr; /* TxBD internal data pointer */
+ uint fcc_rbptr; /* Rx BD Internal buf pointer */
+ uint fcc_tbptr; /* Tx BD Internal buf pointer */
+ uint fcc_rcrc; /* Rx temp CRC */
+ uint fcc_res2;
+ uint fcc_tcrc; /* Tx temp CRC */
+} fccp_t;
+
+
+/* Ethernet controller through FCC.
+*/
+typedef struct fcc_enet {
+ fccp_t fen_genfcc;
+ uint fen_statbuf; /* Internal status buffer */
+ uint fen_camptr; /* CAM address */
+ uint fen_cmask; /* Constant mask for CRC */
+ uint fen_cpres; /* Preset CRC */
+ uint fen_crcec; /* CRC Error counter */
+ uint fen_alec; /* alignment error counter */
+ uint fen_disfc; /* discard frame counter */
+ ushort fen_retlim; /* Retry limit */
+ ushort fen_retcnt; /* Retry counter */
+ ushort fen_pper; /* Persistence */
+ ushort fen_boffcnt; /* backoff counter */
+ uint fen_gaddrh; /* Group address filter, high 32-bits */
+ uint fen_gaddrl; /* Group address filter, low 32-bits */
+ ushort fen_tfcstat; /* out of sequence TxBD */
+ ushort fen_tfclen;
+ uint fen_tfcptr;
+ ushort fen_mflr; /* Maximum frame length (1518) */
+ ushort fen_paddrh; /* MAC address */
+ ushort fen_paddrm;
+ ushort fen_paddrl;
+ ushort fen_ibdcount; /* Internal BD counter */
+ ushort fen_ibdstart; /* Internal BD start pointer */
+ ushort fen_ibdend; /* Internal BD end pointer */
+ ushort fen_txlen; /* Internal Tx frame length counter */
+ uint fen_ibdbase[8]; /* Internal use */
+ uint fen_iaddrh; /* Individual address filter */
+ uint fen_iaddrl;
+ ushort fen_minflr; /* Minimum frame length (64) */
+ ushort fen_taddrh; /* Filter transfer MAC address */
+ ushort fen_taddrm;
+ ushort fen_taddrl;
+ ushort fen_padptr; /* Pointer to pad byte buffer */
+ ushort fen_cftype; /* control frame type */
+ ushort fen_cfrange; /* control frame range */
+ ushort fen_maxb; /* maximum BD count */
+ ushort fen_maxd1; /* Max DMA1 length (1520) */
+ ushort fen_maxd2; /* Max DMA2 length (1520) */
+ ushort fen_maxd; /* internal max DMA count */
+ ushort fen_dmacnt; /* internal DMA counter */
+ uint fen_octc; /* Total octect counter */
+ uint fen_colc; /* Total collision counter */
+ uint fen_broc; /* Total broadcast packet counter */
+ uint fen_mulc; /* Total multicast packet count */
+ uint fen_uspc; /* Total packets < 64 bytes */
+ uint fen_frgc; /* Total packets < 64 bytes with errors */
+ uint fen_ospc; /* Total packets > 1518 */
+ uint fen_jbrc; /* Total packets > 1518 with errors */
+ uint fen_p64c; /* Total packets == 64 bytes */
+ uint fen_p65c; /* Total packets 64 < bytes <= 127 */
+ uint fen_p128c; /* Total packets 127 < bytes <= 255 */
+ uint fen_p256c; /* Total packets 256 < bytes <= 511 */
+ uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
+ uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
+ uint fen_cambuf; /* Internal CAM buffer poiner */
+ ushort fen_rfthr; /* Received frames threshold */
+ ushort fen_rfcnt; /* Received frames count */
+} fcc_enet_t;
+
+/* FCC Event/Mask register as used by Ethernet.
+*/
+#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
+#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
+#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
+#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* FCC Mode Register (FPSMR) as used by Ethernet.
+*/
+#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
+#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
+#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
+#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
+#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
+#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
+#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
+#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
+#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
+#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
+#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
+#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
+#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+ ushort iic_rbase; /* Rx Buffer descriptor base address */
+ ushort iic_tbase; /* Tx Buffer descriptor base address */
+ u_char iic_rfcr; /* Rx function code */
+ u_char iic_tfcr; /* Tx function code */
+ ushort iic_mrblr; /* Max receive buffer length */
+ uint iic_rstate; /* Internal */
+ uint iic_rdp; /* Internal */
+ ushort iic_rbptr; /* Internal */
+ ushort iic_rbc; /* Internal */
+ uint iic_rxtmp; /* Internal */
+ uint iic_tstate; /* Internal */
+ uint iic_tdp; /* Internal */
+ ushort iic_tbptr; /* Internal */
+ ushort iic_tbc; /* Internal */
+ uint iic_txtmp; /* Internal */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+ ushort spi_rbase; /* Rx Buffer descriptor base address */
+ ushort spi_tbase; /* Tx Buffer descriptor base address */
+ u_char spi_rfcr; /* Rx function code */
+ u_char spi_tfcr; /* Tx function code */
+ ushort spi_mrblr; /* Max receive buffer length */
+ uint spi_rstate; /* Internal */
+ uint spi_rdp; /* Internal */
+ ushort spi_rbptr; /* Internal */
+ ushort spi_rbc; /* Internal */
+ uint spi_rxtmp; /* Internal */
+ uint spi_tstate; /* Internal */
+ uint spi_tdp; /* Internal */
+ ushort spi_tbptr; /* Internal */
+ ushort spi_tbc; /* Internal */
+ uint spi_txtmp; /* Internal */
+ uint spi_res; /* Tx temp. */
+ uint spi_res1[4]; /* SDMA temp. */
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
+#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
+#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
+#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
+#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
+#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
+#define SPMODE_EN ((ushort)0x0100) /* Enable */
+#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
+#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
+
+#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x) ((x) &0xF)
+
+#define SPI_EB ((u_char)0x10) /* big endian byte order */
+
+#define BD_IIC_START ((ushort)0x0400)
+
+/* IDMA parameter RAM
+*/
+typedef struct idma {
+ ushort ibase; /* IDMA buffer descriptor table base address */
+ ushort dcm; /* DMA channel mode */
+ ushort ibdptr; /* IDMA current buffer descriptor pointer */
+ ushort dpr_buf; /* IDMA transfer buffer base address */
+ ushort buf_inv; /* internal buffer inventory */
+ ushort ss_max; /* steady-state maximum transfer size */
+ ushort dpr_in_ptr; /* write pointer inside the internal buffer */
+ ushort sts; /* source transfer size */
+ ushort dpr_out_ptr; /* read pointer inside the internal buffer */
+ ushort seob; /* source end of burst */
+ ushort deob; /* destination end of burst */
+ ushort dts; /* destination transfer size */
+ ushort ret_add; /* return address when working in ERM=1 mode */
+ ushort res0; /* reserved */
+ uint bd_cnt; /* internal byte count */
+ uint s_ptr; /* source internal data pointer */
+ uint d_ptr; /* destination internal data pointer */
+ uint istate; /* internal state */
+ u_char res1[20]; /* pad to 64-byte length */
+} idma_t;
+
+/* DMA channel mode bit fields
+*/
+#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */
+#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */
+#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */
+#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */
+#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */
+#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */
+#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */
+#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */
+#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */
+#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */
+#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */
+#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */
+#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */
+
+/* IDMA Buffer Descriptors
+*/
+typedef struct idma_bd {
+ uint flags;
+ uint len; /* data length */
+ uint src; /* source data buffer pointer */
+ uint dst; /* destination data buffer pointer */
+} idma_bd_t;
+
+/* IDMA buffer descriptor flag bit fields
+*/
+#define IDMA_BD_V ((uint)0x80000000) /* valid */
+#define IDMA_BD_W ((uint)0x20000000) /* wrap */
+#define IDMA_BD_I ((uint)0x10000000) /* interrupt */
+#define IDMA_BD_L ((uint)0x08000000) /* last */
+#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */
+#define IDMA_BD_SDN ((uint)0x00400000) /* source done */
+#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */
+#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */
+#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */
+#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */
+#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */
+#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */
+#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */
+#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */
+#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */
+
+/* per-channel IDMA registers
+*/
+typedef struct im_idma {
+ u_char idsr; /* IDMAn event status register */
+ u_char res0[3];
+ u_char idmr; /* IDMAn event mask register */
+ u_char res1[3];
+} im_idma_t;
+
+/* IDMA event register bit fields
+*/
+#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */
+#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */
+#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */
+#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */
+
+/* RISC Controller Configuration Register (RCCR) bit fields
+*/
+#define RCCR_TIME ((uint)0x80000000) /* timer enable */
+#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */
+#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */
+#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */
+#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */
+#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */
+#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */
+#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
+#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */
+#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */
+#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */
+#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
+#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */
+#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */
+#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */
+#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
+#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */
+#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */
+#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */
+#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
+#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */
+#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */
+#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */
+#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */
+#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */
+#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */
+#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */
+#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */
+#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */
+#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */
+#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */
+#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */
+#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */
+#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */
+#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */
+#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */
+#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
+#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
+
+/*-----------------------------------------------------------------------
+ * CMXFCR - CMX FCC Clock Route Register
+ */
+#define CMXFCR_FC1 0x40000000 /* FCC1 connection */
+#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */
+#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */
+#define CMXFCR_FC2 0x00400000 /* FCC2 connection */
+#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */
+#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */
+#define CMXFCR_FC3 0x00004000 /* FCC3 connection */
+#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */
+#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */
+
+#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */
+#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */
+#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */
+#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */
+#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */
+#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */
+#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */
+#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */
+#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */
+#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */
+#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */
+#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */
+#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */
+#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */
+#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */
+#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */
+#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */
+#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */
+#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */
+#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */
+#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */
+#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */
+#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */
+#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */
+#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */
+#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */
+#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */
+#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */
+#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */
+#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */
+#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */
+#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */
+#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */
+#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */
+#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */
+#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */
+
+#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */
+#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */
+#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */
+#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */
+#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */
+#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */
+#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */
+#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */
+
+/*-----------------------------------------------------------------------
+ * CMXSCR - CMX SCC Clock Route Register
+ */
+#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */
+#define CMXSCR_SC1 0x40000000 /* SCC1 connection */
+#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */
+#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */
+#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */
+#define CMXSCR_SC2 0x00400000 /* SCC2 connection */
+#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */
+#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */
+#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */
+#define CMXSCR_SC3 0x00004000 /* SCC3 connection */
+#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */
+#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */
+#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */
+#define CMXSCR_SC4 0x00000040 /* SCC4 connection */
+#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */
+#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */
+
+#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */
+#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */
+#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */
+#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */
+#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */
+#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */
+#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */
+#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */
+#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */
+#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */
+#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */
+#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */
+#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */
+#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */
+#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */
+#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */
+#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */
+#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */
+#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */
+#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */
+#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */
+#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */
+#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */
+#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */
+#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */
+#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */
+#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */
+#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */
+#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */
+#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */
+#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */
+#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */
+#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */
+#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */
+#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */
+#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */
+#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */
+#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */
+#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */
+#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */
+#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */
+#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */
+#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */
+
+#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */
+#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */
+#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */
+#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */
+#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */
+#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */
+#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */
+#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */
+#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */
+#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */
+#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */
+#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */
+#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */
+#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */
+#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */
+
+#endif /* __CPM2__ */
+#endif /* __KERNEL__ */
+
+
diff --git a/include/asm-ppc/cputable.h b/include/asm-ppc/cputable.h
new file mode 100644
index 0000000..22de04f
--- /dev/null
+++ b/include/asm-ppc/cputable.h
@@ -0,0 +1,127 @@
+/*
+ * include/asm-ppc/cputable.h
+ *
+ * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_PPC_CPUTABLE_H
+#define __ASM_PPC_CPUTABLE_H
+
+/* Exposed to userland CPU features */
+#define PPC_FEATURE_32 0x80000000
+#define PPC_FEATURE_64 0x40000000
+#define PPC_FEATURE_601_INSTR 0x20000000
+#define PPC_FEATURE_HAS_ALTIVEC 0x10000000
+#define PPC_FEATURE_HAS_FPU 0x08000000
+#define PPC_FEATURE_HAS_MMU 0x04000000
+#define PPC_FEATURE_HAS_4xxMAC 0x02000000
+#define PPC_FEATURE_UNIFIED_CACHE 0x01000000
+#define PPC_FEATURE_HAS_SPE 0x00800000
+#define PPC_FEATURE_HAS_EFP_SINGLE 0x00400000
+#define PPC_FEATURE_HAS_EFP_DOUBLE 0x00200000
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/* This structure can grow, it's real size is used by head.S code
+ * via the mkdefs mecanism.
+ */
+struct cpu_spec;
+
+typedef void (*cpu_setup_t)(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+
+struct cpu_spec {
+ /* CPU is matched via (PVR & pvr_mask) == pvr_value */
+ unsigned int pvr_mask;
+ unsigned int pvr_value;
+
+ char *cpu_name;
+ unsigned int cpu_features; /* Kernel features */
+ unsigned int cpu_user_features; /* Userland features */
+
+ /* cache line sizes */
+ unsigned int icache_bsize;
+ unsigned int dcache_bsize;
+
+ /* number of performance monitor counters */
+ unsigned int num_pmcs;
+
+ /* this is called to initialize various CPU bits like L1 cache,
+ * BHT, SPD, etc... from head.S before branching to identify_machine
+ */
+ cpu_setup_t cpu_setup;
+};
+
+extern struct cpu_spec cpu_specs[];
+extern struct cpu_spec *cur_cpu_spec[];
+
+static inline unsigned int cpu_has_feature(unsigned int feature)
+{
+ return cur_cpu_spec[0]->cpu_features & feature;
+}
+
+#endif /* __ASSEMBLY__ */
+
+/* CPU kernel features */
+#define CPU_FTR_SPLIT_ID_CACHE 0x00000001
+#define CPU_FTR_L2CR 0x00000002
+#define CPU_FTR_SPEC7450 0x00000004
+#define CPU_FTR_ALTIVEC 0x00000008
+#define CPU_FTR_TAU 0x00000010
+#define CPU_FTR_CAN_DOZE 0x00000020
+#define CPU_FTR_USE_TB 0x00000040
+#define CPU_FTR_604_PERF_MON 0x00000080
+#define CPU_FTR_601 0x00000100
+#define CPU_FTR_HPTE_TABLE 0x00000200
+#define CPU_FTR_CAN_NAP 0x00000400
+#define CPU_FTR_L3CR 0x00000800
+#define CPU_FTR_L3_DISABLE_NAP 0x00001000
+#define CPU_FTR_NAP_DISABLE_L2_PR 0x00002000
+#define CPU_FTR_DUAL_PLL_750FX 0x00004000
+#define CPU_FTR_NO_DPM 0x00008000
+#define CPU_FTR_HAS_HIGH_BATS 0x00010000
+#define CPU_FTR_NEED_COHERENT 0x00020000
+#define CPU_FTR_NO_BTIC 0x00040000
+
+#ifdef __ASSEMBLY__
+
+#define BEGIN_FTR_SECTION 98:
+
+#define END_FTR_SECTION(msk, val) \
+99: \
+ .section __ftr_fixup,"a"; \
+ .align 2; \
+ .long msk; \
+ .long val; \
+ .long 98b; \
+ .long 99b; \
+ .previous
+
+#else
+
+#define BEGIN_FTR_SECTION "98:\n"
+#define END_FTR_SECTION(msk, val) \
+"99:\n" \
+" .section __ftr_fixup,\"a\";\n" \
+" .align 2;\n" \
+" .long "#msk";\n" \
+" .long "#val";\n" \
+" .long 98b;\n" \
+" .long 99b;\n" \
+" .previous\n"
+
+
+#endif /* __ASSEMBLY__ */
+
+#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk))
+#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0)
+
+#endif /* __ASM_PPC_CPUTABLE_H */
+#endif /* __KERNEL__ */
+
diff --git a/include/asm-ppc/cputime.h b/include/asm-ppc/cputime.h
new file mode 100644
index 0000000..8e9faf5
--- /dev/null
+++ b/include/asm-ppc/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __PPC_CPUTIME_H
+#define __PPC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __PPC_CPUTIME_H */
diff --git a/include/asm-ppc/current.h b/include/asm-ppc/current.h
new file mode 100644
index 0000000..8d41501
--- /dev/null
+++ b/include/asm-ppc/current.h
@@ -0,0 +1,11 @@
+#ifdef __KERNEL__
+#ifndef _PPC_CURRENT_H
+#define _PPC_CURRENT_H
+
+/*
+ * We keep `current' in r2 for speed.
+ */
+register struct task_struct *current asm ("r2");
+
+#endif /* !(_PPC_CURRENT_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/dbdma.h b/include/asm-ppc/dbdma.h
new file mode 100644
index 0000000..6047f28
--- /dev/null
+++ b/include/asm-ppc/dbdma.h
@@ -0,0 +1,102 @@
+/*
+ * Definitions for using the Apple Descriptor-Based DMA controller
+ * in Power Macintosh computers.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifdef __KERNEL__
+#ifndef _ASM_DBDMA_H_
+#define _ASM_DBDMA_H_
+/*
+ * DBDMA control/status registers. All little-endian.
+ */
+struct dbdma_regs {
+ unsigned int control; /* lets you change bits in status */
+ unsigned int status; /* DMA and device status bits (see below) */
+ unsigned int cmdptr_hi; /* upper 32 bits of command address */
+ unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */
+ unsigned int intr_sel; /* select interrupt condition bit */
+ unsigned int br_sel; /* select branch condition bit */
+ unsigned int wait_sel; /* select wait condition bit */
+ unsigned int xfer_mode;
+ unsigned int data2ptr_hi;
+ unsigned int data2ptr;
+ unsigned int res1;
+ unsigned int address_hi;
+ unsigned int br_addr_hi;
+ unsigned int res2[3];
+};
+
+/* Bits in control and status registers */
+#define RUN 0x8000
+#define PAUSE 0x4000
+#define FLUSH 0x2000
+#define WAKE 0x1000
+#define DEAD 0x0800
+#define ACTIVE 0x0400
+#define BT 0x0100
+#define DEVSTAT 0x00ff
+
+/*
+ * DBDMA command structure. These fields are all little-endian!
+ */
+struct dbdma_cmd {
+ unsigned short req_count; /* requested byte transfer count */
+ unsigned short command; /* command word (has bit-fields) */
+ unsigned int phy_addr; /* physical data address */
+ unsigned int cmd_dep; /* command-dependent field */
+ unsigned short res_count; /* residual count after completion */
+ unsigned short xfer_status; /* transfer status */
+};
+
+/* DBDMA command values in command field */
+#define OUTPUT_MORE 0 /* transfer memory data to stream */
+#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */
+#define INPUT_MORE 0x2000 /* transfer stream data to memory */
+#define INPUT_LAST 0x3000 /* ditto, expect end marker */
+#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */
+#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */
+#define DBDMA_NOP 0x6000 /* do nothing */
+#define DBDMA_STOP 0x7000 /* suspend processing */
+
+/* Key values in command field */
+#define KEY_STREAM0 0 /* usual data stream */
+#define KEY_STREAM1 0x100 /* control/status stream */
+#define KEY_STREAM2 0x200 /* device-dependent stream */
+#define KEY_STREAM3 0x300 /* device-dependent stream */
+#define KEY_REGS 0x500 /* device register space */
+#define KEY_SYSTEM 0x600 /* system memory-mapped space */
+#define KEY_DEVICE 0x700 /* device memory-mapped space */
+
+/* Interrupt control values in command field */
+#define INTR_NEVER 0 /* don't interrupt */
+#define INTR_IFSET 0x10 /* intr if condition bit is 1 */
+#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */
+#define INTR_ALWAYS 0x30 /* always interrupt */
+
+/* Branch control values in command field */
+#define BR_NEVER 0 /* don't branch */
+#define BR_IFSET 0x4 /* branch if condition bit is 1 */
+#define BR_IFCLR 0x8 /* branch if condition bit is 0 */
+#define BR_ALWAYS 0xc /* always branch */
+
+/* Wait control values in command field */
+#define WAIT_NEVER 0 /* don't wait */
+#define WAIT_IFSET 1 /* wait if condition bit is 1 */
+#define WAIT_IFCLR 2 /* wait if condition bit is 0 */
+#define WAIT_ALWAYS 3 /* always wait */
+
+/* Align an address for a DBDMA command structure */
+#define DBDMA_ALIGN(x) (((unsigned)(x) + sizeof(struct dbdma_cmd) - 1) \
+ & -sizeof(struct dbdma_cmd))
+
+/* Useful macros */
+#define DBDMA_DO_STOP(regs) do { \
+ out_le32(&((regs)->control), (RUN|FLUSH)<<16); \
+ while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \
+ ; \
+} while(0)
+
+#endif /* _ASM_DBDMA_H_ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/delay.h b/include/asm-ppc/delay.h
new file mode 100644
index 0000000..badde68
--- /dev/null
+++ b/include/asm-ppc/delay.h
@@ -0,0 +1,66 @@
+#ifdef __KERNEL__
+#ifndef _PPC_DELAY_H
+#define _PPC_DELAY_H
+
+#include <asm/param.h>
+
+/*
+ * Copyright 1996, Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+extern unsigned long loops_per_jiffy;
+
+extern void __delay(unsigned int loops);
+
+/*
+ * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so
+ * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32.
+ *
+ * The mulhwu instruction gives us loops = (a * b) / 2^32.
+ * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226
+ * because this lets us support a wide range of HZ and
+ * loops_per_jiffy values without either a or b overflowing 2^32.
+ * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and
+ * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280
+ * (which corresponds to ~3800 bogomips at HZ = 100).
+ * -- paulus
+ */
+#define __MAX_UDELAY (226050910UL/HZ) /* maximum udelay argument */
+#define __MAX_NDELAY (4294967295UL/HZ) /* maximum ndelay argument */
+
+extern __inline__ void __udelay(unsigned int x)
+{
+ unsigned int loops;
+
+ __asm__("mulhwu %0,%1,%2" : "=r" (loops) :
+ "r" (x), "r" (loops_per_jiffy * 226));
+ __delay(loops);
+}
+
+extern __inline__ void __ndelay(unsigned int x)
+{
+ unsigned int loops;
+
+ __asm__("mulhwu %0,%1,%2" : "=r" (loops) :
+ "r" (x), "r" (loops_per_jiffy * 5));
+ __delay(loops);
+}
+
+extern void __bad_udelay(void); /* deliberately undefined */
+extern void __bad_ndelay(void); /* deliberately undefined */
+
+#define udelay(n) (__builtin_constant_p(n)? \
+ ((n) > __MAX_UDELAY? __bad_udelay(): __udelay((n) * (19 * HZ))) : \
+ __udelay((n) * (19 * HZ)))
+
+#define ndelay(n) (__builtin_constant_p(n)? \
+ ((n) > __MAX_NDELAY? __bad_ndelay(): __ndelay((n) * HZ)) : \
+ __ndelay((n) * HZ))
+
+#endif /* defined(_PPC_DELAY_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/div64.h b/include/asm-ppc/div64.h
new file mode 100644
index 0000000..6cd978c
--- /dev/null
+++ b/include/asm-ppc/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-ppc/dma-mapping.h b/include/asm-ppc/dma-mapping.h
new file mode 100644
index 0000000..7f0487a
--- /dev/null
+++ b/include/asm-ppc/dma-mapping.h
@@ -0,0 +1,236 @@
+/*
+ * This is based on both include/asm-sh/dma-mapping.h and
+ * include/asm-ppc/pci.h
+ */
+#ifndef __ASM_PPC_DMA_MAPPING_H
+#define __ASM_PPC_DMA_MAPPING_H
+
+#include <linux/config.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * DMA-consistent mapping functions for PowerPCs that don't support
+ * cache snooping. These allocate/free a region of uncached mapped
+ * memory space for use with DMA devices. Alternatively, you could
+ * allocate the space "normally" and use the cache management functions
+ * to ensure it is consistent.
+ */
+extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp);
+extern void __dma_free_coherent(size_t size, void *vaddr);
+extern void __dma_sync(void *vaddr, size_t size, int direction);
+extern void __dma_sync_page(struct page *page, unsigned long offset,
+ size_t size, int direction);
+#define dma_cache_inv(_start,_size) \
+ invalidate_dcache_range(_start, (_start + _size))
+#define dma_cache_wback(_start,_size) \
+ clean_dcache_range(_start, (_start + _size))
+#define dma_cache_wback_inv(_start,_size) \
+ flush_dcache_range(_start, (_start + _size))
+
+#else /* ! CONFIG_NOT_COHERENT_CACHE */
+/*
+ * Cache coherent cores.
+ */
+
+#define dma_cache_inv(_start,_size) do { } while (0)
+#define dma_cache_wback(_start,_size) do { } while (0)
+#define dma_cache_wback_inv(_start,_size) do { } while (0)
+
+#define __dma_alloc_coherent(gfp, size, handle) NULL
+#define __dma_free_coherent(size, addr) do { } while (0)
+#define __dma_sync(addr, size, rw) do { } while (0)
+#define __dma_sync_page(pg, off, sz, rw) do { } while (0)
+
+#endif /* ! CONFIG_NOT_COHERENT_CACHE */
+
+#define dma_supported(dev, mask) (1)
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+
+ *dev->dma_mask = dma_mask;
+
+ return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t * dma_handle, int gfp)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ return __dma_alloc_coherent(size, dma_handle, gfp);
+#else
+ void *ret;
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+ gfp |= GFP_DMA;
+
+ ret = (void *)__get_free_pages(gfp, get_order(size));
+
+ if (ret != NULL) {
+ memset(ret, 0, size);
+ *dma_handle = virt_to_bus(ret);
+ }
+
+ return ret;
+#endif
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ __dma_free_coherent(size, vaddr);
+#else
+ free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+
+ __dma_sync(ptr, size, direction);
+
+ return virt_to_bus(ptr);
+}
+
+/* We do nothing. */
+#define dma_unmap_single(dev, addr, size, dir) do { } while (0)
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+
+ __dma_sync_page(page, offset, size, direction);
+
+ return (page - mem_map) * PAGE_SIZE + PCI_DRAM_OFFSET + offset;
+}
+
+/* We do nothing. */
+#define dma_unmap_page(dev, handle, size, dir) do { } while (0)
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ int i;
+
+ BUG_ON(direction == DMA_NONE);
+
+ for (i = 0; i < nents; i++, sg++) {
+ BUG_ON(!sg->page);
+ __dma_sync_page(sg->page, sg->offset, sg->length, direction);
+ sg->dma_address = page_to_bus(sg->page) + sg->offset;
+ }
+
+ return nents;
+}
+
+/* We don't do anything here. */
+#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0)
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+
+ __dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+
+ __dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ int i;
+
+ BUG_ON(direction == DMA_NONE);
+
+ for (i = 0; i < nents; i++, sg++)
+ __dma_sync_page(sg->page, sg->offset, sg->length, direction);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ int i;
+
+ BUG_ON(direction == DMA_NONE);
+
+ for (i = 0; i < nents; i++, sg++)
+ __dma_sync_page(sg->page, sg->offset, sg->length, direction);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define dma_is_consistent(d) (0)
+#else
+#define dma_is_consistent(d) (1)
+#endif
+
+static inline int dma_get_cache_alignment(void)
+{
+ /*
+ * Each processor family will define its own L1_CACHE_SHIFT,
+ * L1_CACHE_BYTES wraps to this, so this is always safe.
+ */
+ return L1_CACHE_BYTES;
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ /* just sync everything for now */
+ dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ /* just sync everything for now */
+ dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_cache_sync(void *vaddr, size_t size,
+ enum dma_data_direction direction)
+{
+ __dma_sync(vaddr, size, (int)direction);
+}
+
+static inline int dma_mapping_error(dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+#endif /* __ASM_PPC_DMA_MAPPING_H */
diff --git a/include/asm-ppc/dma.h b/include/asm-ppc/dma.h
new file mode 100644
index 0000000..cc8e5cd
--- /dev/null
+++ b/include/asm-ppc/dma.h
@@ -0,0 +1,371 @@
+/*
+ * include/asm-ppc/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ * Changes for ppc sound by Christoph Nadig
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+
+/*
+ * Note: Adapted for PowerPC by Gary Thomas
+ * Modified by Cort Dougan <cort@cs.nmt.edu>
+ *
+ * None of this really applies for Power Macintoshes. There is
+ * basically just enough here to get kernel/dma.c to compile.
+ *
+ * There may be some comments or restrictions made here which are
+ * not valid for the PReP platform. Take what you read
+ * with a grain of salt.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#ifndef MAX_DMA_CHANNELS
+#define MAX_DMA_CHANNELS 8
+#endif
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Doesn't really apply... */
+#define MAX_DMA_ADDRESS 0xFFFFFFFF
+
+/* in arch/ppc/kernel/setup.c -- Cort */
+extern unsigned long DMA_MODE_WRITE, DMA_MODE_READ;
+extern unsigned long ISA_DMA_THRESHOLD;
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb outb_p
+#else
+#define dma_outb outb
+#endif
+
+#define dma_inb inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ * controller 1: channels 0-3, byte operations, ports 00-1F
+ * controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ * - ALL registers are 8 bits only, regardless of transfer size
+ * - channel 4 is not used - cascades 1 into 2.
+ * - channels 0-3 are byte - addresses/counts are for physical bytes
+ * - channels 5-7 are word - addresses/counts are for physical words
+ * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ * - transfer count loaded to registers is 1 less than actual count
+ * - controller 2 offsets are all even (2x offsets for controller 1)
+ * - page registers for 5-7 don't use data bit 0, represent 128K pages
+ * - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ * Address mapping for channels 0-3:
+ *
+ * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * P7 ... P0 A7 ... A0 A7 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Address mapping for channels 5-7:
+ *
+ * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
+ * | ... | \ \ ... \ \ \ ... \ \
+ * | ... | \ \ ... \ \ \ ... \ (not used)
+ * | ... | \ \ ... \ \ \ ... \
+ * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+/* see prep_setup_arch() for detailed informations */
+#if defined(CONFIG_SOUND_CS4232) && defined(CONFIG_PPC_PREP)
+extern long ppc_cs4232_dma, ppc_cs4232_dma2;
+#define SND_DMA1 ppc_cs4232_dma
+#define SND_DMA2 ppc_cs4232_dma2
+#else
+#define SND_DMA1 -1
+#define SND_DMA2 -1
+#endif
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG 0x08 /* command register (w) */
+#define DMA1_STAT_REG 0x08 /* status register (r) */
+#define DMA1_REQ_REG 0x09 /* request register (w) */
+#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
+#define DMA1_MODE_REG 0x0B /* mode register (w) */
+#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
+#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
+#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
+#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
+
+#define DMA2_CMD_REG 0xD0 /* command register (w) */
+#define DMA2_STAT_REG 0xD0 /* status register (r) */
+#define DMA2_REQ_REG 0xD2 /* request register (w) */
+#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
+#define DMA2_MODE_REG 0xD6 /* mode register (w) */
+#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
+#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
+#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
+#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
+
+#define DMA_ADDR_0 0x00 /* DMA address registers */
+#define DMA_ADDR_1 0x02
+#define DMA_ADDR_2 0x04
+#define DMA_ADDR_3 0x06
+#define DMA_ADDR_4 0xC0
+#define DMA_ADDR_5 0xC4
+#define DMA_ADDR_6 0xC8
+#define DMA_ADDR_7 0xCC
+
+#define DMA_CNT_0 0x01 /* DMA count registers */
+#define DMA_CNT_1 0x03
+#define DMA_CNT_2 0x05
+#define DMA_CNT_3 0x07
+#define DMA_CNT_4 0xC2
+#define DMA_CNT_5 0xC6
+#define DMA_CNT_6 0xCA
+#define DMA_CNT_7 0xCE
+
+#define DMA_LO_PAGE_0 0x87 /* DMA page registers */
+#define DMA_LO_PAGE_1 0x83
+#define DMA_LO_PAGE_2 0x81
+#define DMA_LO_PAGE_3 0x82
+#define DMA_LO_PAGE_5 0x8B
+#define DMA_LO_PAGE_6 0x89
+#define DMA_LO_PAGE_7 0x8A
+
+#define DMA_HI_PAGE_0 0x487 /* DMA page registers */
+#define DMA_HI_PAGE_1 0x483
+#define DMA_HI_PAGE_2 0x481
+#define DMA_HI_PAGE_3 0x482
+#define DMA_HI_PAGE_5 0x48B
+#define DMA_HI_PAGE_6 0x489
+#define DMA_HI_PAGE_7 0x48A
+
+#define DMA1_EXT_REG 0x40B
+#define DMA2_EXT_REG 0x4D6
+
+#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
+#define DMA_AUTOINIT 0x10
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ unsigned char ucDmaCmd = 0x00;
+
+ if (dmanr != 4) {
+ dma_outb(0, DMA2_MASK_REG); /* This may not be enabled */
+ dma_outb(ucDmaCmd, DMA2_CMD_REG); /* Enable group */
+ }
+ if (dmanr <= 3) {
+ dma_outb(dmanr, DMA1_MASK_REG);
+ dma_outb(ucDmaCmd, DMA1_CMD_REG); /* Enable group */
+ } else
+ dma_outb(dmanr & 3, DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ if (dmanr <= 3)
+ dma_outb(dmanr | 4, DMA1_MASK_REG);
+ else
+ dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+ if (dmanr <= 3)
+ dma_outb(0, DMA1_CLEAR_FF_REG);
+ else
+ dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+ if (dmanr <= 3)
+ dma_outb(mode | dmanr, DMA1_MODE_REG);
+ else
+ dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
+{
+ switch (dmanr) {
+ case 0:
+ dma_outb(pagenr, DMA_LO_PAGE_0);
+ dma_outb(pagenr >> 8, DMA_HI_PAGE_0);
+ break;
+ case 1:
+ dma_outb(pagenr, DMA_LO_PAGE_1);
+ dma_outb(pagenr >> 8, DMA_HI_PAGE_1);
+ break;
+ case 2:
+ dma_outb(pagenr, DMA_LO_PAGE_2);
+ dma_outb(pagenr >> 8, DMA_HI_PAGE_2);
+ break;
+ case 3:
+ dma_outb(pagenr, DMA_LO_PAGE_3);
+ dma_outb(pagenr >> 8, DMA_HI_PAGE_3);
+ break;
+ case 5:
+ if (SND_DMA1 == 5 || SND_DMA2 == 5)
+ dma_outb(pagenr, DMA_LO_PAGE_5);
+ else
+ dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
+ dma_outb(pagenr >> 8, DMA_HI_PAGE_5);
+ break;
+ case 6:
+ if (SND_DMA1 == 6 || SND_DMA2 == 6)
+ dma_outb(pagenr, DMA_LO_PAGE_6);
+ else
+ dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
+ dma_outb(pagenr >> 8, DMA_HI_PAGE_6);
+ break;
+ case 7:
+ if (SND_DMA1 == 7 || SND_DMA2 == 7)
+ dma_outb(pagenr, DMA_LO_PAGE_7);
+ else
+ dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
+ dma_outb(pagenr >> 8, DMA_HI_PAGE_7);
+ break;
+ }
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
+{
+ if (dmanr <= 3) {
+ dma_outb(phys & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
+ dma_outb((phys >> 8) & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
+ } else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) {
+ dma_outb(phys & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+ dma_outb((phys >> 8) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+ dma_outb((dmanr & 3), DMA2_EXT_REG);
+ } else {
+ dma_outb((phys >> 1) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+ dma_outb((phys >> 9) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+ }
+ set_dma_page(dmanr, phys >> 16);
+}
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ count--;
+ if (dmanr <= 3) {
+ dma_outb(count & 0xff, ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+ dma_outb((count >> 8) & 0xff, ((dmanr & 3) << 1) + 1 +
+ IO_DMA1_BASE);
+ } else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) {
+ dma_outb(count & 0xff, ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+ dma_outb((count >> 8) & 0xff, ((dmanr & 3) << 2) + 2 +
+ IO_DMA2_BASE);
+ } else {
+ dma_outb((count >> 1) & 0xff, ((dmanr & 3) << 2) + 2 +
+ IO_DMA2_BASE);
+ dma_outb((count >> 9) & 0xff, ((dmanr & 3) << 2) + 2 +
+ IO_DMA2_BASE);
+ }
+}
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ unsigned int io_port = (dmanr <= 3) ?
+ ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
+ : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
+
+ /* using short to get 16-bit wrap around */
+ unsigned short count;
+
+ count = 1 + dma_inb(io_port);
+ count += dma_inb(io_port) << 8;
+
+ return (dmanr <= 3 || dmanr == SND_DMA1 || dmanr == SND_DMA2)
+ ? count : (count << 1);
+
+}
+
+/* These are in kernel/dma.c: */
+
+/* reserve a DMA channel */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+/* release it again */
+extern void free_dma(unsigned int dmanr);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+#endif /* _ASM_DMA_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/elf.h b/include/asm-ppc/elf.h
new file mode 100644
index 0000000..2c05696
--- /dev/null
+++ b/include/asm-ppc/elf.h
@@ -0,0 +1,160 @@
+#ifndef __PPC_ELF_H
+#define __PPC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE 0
+#define R_PPC_ADDR32 1 /* 32bit absolute address */
+#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */
+#define R_PPC_ADDR16 3 /* 16bit absolute address */
+#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */
+#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN 8
+#define R_PPC_ADDR14_BRNTAKEN 9
+#define R_PPC_REL24 10 /* PC relative 26 bit */
+#define R_PPC_REL14 11 /* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN 12
+#define R_PPC_REL14_BRNTAKEN 13
+#define R_PPC_GOT16 14
+#define R_PPC_GOT16_LO 15
+#define R_PPC_GOT16_HI 16
+#define R_PPC_GOT16_HA 17
+#define R_PPC_PLTREL24 18
+#define R_PPC_COPY 19
+#define R_PPC_GLOB_DAT 20
+#define R_PPC_JMP_SLOT 21
+#define R_PPC_RELATIVE 22
+#define R_PPC_LOCAL24PC 23
+#define R_PPC_UADDR32 24
+#define R_PPC_UADDR16 25
+#define R_PPC_REL32 26
+#define R_PPC_PLT32 27
+#define R_PPC_PLTREL32 28
+#define R_PPC_PLT16_LO 29
+#define R_PPC_PLT16_HI 30
+#define R_PPC_PLT16_HA 31
+#define R_PPC_SDAREL16 32
+#define R_PPC_SECTOFF 33
+#define R_PPC_SECTOFF_LO 34
+#define R_PPC_SECTOFF_HI 35
+#define R_PPC_SECTOFF_HA 36
+/* Keep this the last entry. */
+#define R_PPC_NUM 37
+
+#define ELF_NGREG 48 /* includes nip, msr, lr, etc. */
+#define ELF_NFPREG 33 /* includes fpscr */
+#define ELF_NVRREG 33 /* includes vscr */
+#define ELF_NEVRREG 34 /* includes acc (as 2) */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH EM_PPC
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+
+/* General registers */
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+
+#define elf_check_arch(x) ((x)->e_machine == EM_PPC)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE (0x08000000)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+#define ELF_CORE_COPY_REGS(gregs, regs) \
+ memcpy((gregs), (regs), sizeof(struct pt_regs)); \
+ memset((char *)(gregs) + sizeof(struct pt_regs), 0, \
+ sizeof(elf_gregset_t) - sizeof(struct pt_regs));
+
+#define ELF_CORE_COPY_TASK_REGS(t, elfregs) \
+ ((t)->thread.regs? \
+ ({ ELF_CORE_COPY_REGS((elfregs), (t)->thread.regs); 1; }): 0)
+
+extern int dump_task_fpu(struct task_struct *t, elf_fpregset_t *fpu);
+#define ELF_CORE_COPY_FPREGS(t, fpu) dump_task_fpu((t), (fpu))
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. This could be done in userspace,
+ but it's not easy, and we've already done it here. */
+
+#define ELF_HWCAP (cur_cpu_spec[0]->cpu_user_features)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo.
+
+ For the moment, we have only optimizations for the Intel generations,
+ but that could change... */
+
+#define ELF_PLATFORM (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE 19
+#define AT_ICACHEBSIZE 20
+#define AT_UCACHEBSIZE 21
+/* A special ignored type value for PPC, for glibc compatibility. */
+#define AT_IGNOREPPC 22
+
+extern int dcache_bsize;
+extern int icache_bsize;
+extern int ucache_bsize;
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ * AUXV is greater than 16 for glibc compatibility.
+ * AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ * even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ */
+#define ARCH_DLINFO \
+do { \
+ /* Handle glibc compatibility. */ \
+ NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \
+ NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \
+ /* Cache size items */ \
+ NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize); \
+ NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \
+ NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \
+ } while (0)
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/asm-ppc/errno.h b/include/asm-ppc/errno.h
new file mode 100644
index 0000000..19f20bd
--- /dev/null
+++ b/include/asm-ppc/errno.h
@@ -0,0 +1,11 @@
+#ifndef _PPC_ERRNO_H
+#define _PPC_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#undef EDEADLOCK
+#define EDEADLOCK 58 /* File locking deadlock error */
+
+#define _LAST_ERRNO 516
+
+#endif
diff --git a/include/asm-ppc/fcntl.h b/include/asm-ppc/fcntl.h
new file mode 100644
index 0000000..5e28e41
--- /dev/null
+++ b/include/asm-ppc/fcntl.h
@@ -0,0 +1,93 @@
+#ifndef _PPC_FCNTL_H
+#define _PPC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+ located on an ext2 file system */
+#define O_ACCMODE 0003
+#define O_RDONLY 00
+#define O_WRONLY 01
+#define O_RDWR 02
+#define O_CREAT 0100 /* not fcntl */
+#define O_EXCL 0200 /* not fcntl */
+#define O_NOCTTY 0400 /* not fcntl */
+#define O_TRUNC 01000 /* not fcntl */
+#define O_APPEND 02000
+#define O_NONBLOCK 04000
+#define O_NDELAY O_NONBLOCK
+#define O_SYNC 010000
+#define FASYNC 020000 /* fcntl, for BSD compatibility */
+#define O_DIRECTORY 040000 /* must be a directory */
+#define O_NOFOLLOW 0100000 /* don't follow links */
+#define O_LARGEFILE 0200000
+#define O_DIRECT 0400000 /* direct disk access hint */
+#define O_NOATIME 01000000
+
+#define F_DUPFD 0 /* dup */
+#define F_GETFD 1 /* get close_on_exec */
+#define F_SETFD 2 /* set/clear close_on_exec */
+#define F_GETFL 3 /* get file->f_flags */
+#define F_SETFL 4 /* set file->f_flags */
+#define F_GETLK 5
+#define F_SETLK 6
+#define F_SETLKW 7
+
+#define F_SETOWN 8 /* for sockets. */
+#define F_GETOWN 9 /* for sockets. */
+#define F_SETSIG 10 /* for sockets. */
+#define F_GETSIG 11 /* for sockets. */
+
+#define F_GETLK64 12 /* using 'struct flock64' */
+#define F_SETLK64 13
+#define F_SETLKW64 14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK 0
+#define F_WRLCK 1
+#define F_UNLCK 2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK 4 /* or 3 */
+#define F_SHLCK 8 /* or 4 */
+
+/* for leases */
+#define F_INPROGRESS 16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH 1 /* shared lock */
+#define LOCK_EX 2 /* exclusive lock */
+#define LOCK_NB 4 /* or'd with one of the above to prevent
+ blocking */
+#define LOCK_UN 8 /* remove lock */
+
+#define LOCK_MAND 32 /* This is a mandatory flock */
+#define LOCK_READ 64 /* ... Which allows concurrent read operations */
+#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */
+#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */
+
+#ifdef __KERNEL__
+#define F_POSIX 1
+#define F_FLOCK 2
+#define F_BROKEN 4 /* broken flock() emulation */
+#endif /* __KERNEL__ */
+
+struct flock {
+ short l_type;
+ short l_whence;
+ off_t l_start;
+ off_t l_len;
+ pid_t l_pid;
+};
+
+struct flock64 {
+ short l_type;
+ short l_whence;
+ loff_t l_start;
+ loff_t l_len;
+ pid_t l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE 1024
+#endif
diff --git a/include/asm-ppc/floppy.h b/include/asm-ppc/floppy.h
new file mode 100644
index 0000000..8ccd4a2
--- /dev/null
+++ b/include/asm-ppc/floppy.h
@@ -0,0 +1,182 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_FLOPPY_H
+#define __ASM_PPC_FLOPPY_H
+
+#define fd_inb(port) inb_p(port)
+#define fd_outb(value,port) outb_p(value,port)
+
+#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA)
+#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA)
+#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA)
+#define fd_dma_setup(addr, size, mode, io) fd_ops->_dma_setup(addr, size, mode, io)
+#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
+#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
+
+static int fd_request_dma(void);
+
+struct fd_dma_ops {
+ void (*_disable_dma)(unsigned int dmanr);
+ void (*_free_dma)(unsigned int dmanr);
+ int (*_get_dma_residue)(unsigned int dummy);
+ int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+};
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_vdma;
+static struct fd_dma_ops *fd_ops;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
+{
+ unsigned char st;
+ int lcount;
+ char *lptr;
+
+ if (!doing_vdma)
+ return floppy_interrupt(irq, dev_id, regs);
+
+
+ st = 1;
+ for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
+ lcount; lcount--, lptr++) {
+ st=inb(virtual_dma_port+4) & 0xa0 ;
+ if (st != 0xa0)
+ break;
+ if (virtual_dma_mode)
+ outb_p(*lptr, virtual_dma_port+5);
+ else
+ *lptr = inb_p(virtual_dma_port+5);
+ }
+ virtual_dma_count = lcount;
+ virtual_dma_addr = lptr;
+ st = inb(virtual_dma_port+4);
+
+ if (st == 0x20)
+ return IRQ_HANDLED;
+ if (!(st & 0x20)) {
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+ doing_vdma = 0;
+ floppy_interrupt(irq, dev_id, regs);
+ return IRQ_HANDLED;
+ }
+ return IRQ_HANDLED;
+}
+
+static void vdma_disable_dma(unsigned int dummy)
+{
+ doing_vdma = 0;
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+ return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+ if (can_use_virtual_dma)
+ return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
+ "floppy", NULL);
+ else
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ SA_INTERRUPT|SA_SAMPLE_RANDOM,
+ "floppy", NULL);
+
+}
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+ doing_vdma = 1;
+ virtual_dma_port = io;
+ virtual_dma_mode = (mode == DMA_MODE_WRITE);
+ virtual_dma_addr = addr;
+ virtual_dma_count = size;
+ virtual_dma_residue = 0;
+ return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+ /* actual, physical DMA */
+ doing_vdma = 0;
+ clear_dma_ff(FLOPPY_DMA);
+ set_dma_mode(FLOPPY_DMA,mode);
+ set_dma_addr(FLOPPY_DMA,(unsigned int)virt_to_bus(addr));
+ set_dma_count(FLOPPY_DMA,size);
+ enable_dma(FLOPPY_DMA);
+ return 0;
+}
+
+static struct fd_dma_ops real_dma_ops =
+{
+ ._disable_dma = disable_dma,
+ ._free_dma = free_dma,
+ ._get_dma_residue = get_dma_residue,
+ ._dma_setup = hard_dma_setup
+};
+
+static struct fd_dma_ops virt_dma_ops =
+{
+ ._disable_dma = vdma_disable_dma,
+ ._free_dma = vdma_nop,
+ ._get_dma_residue = vdma_get_dma_residue,
+ ._dma_setup = vdma_dma_setup
+};
+
+static int fd_request_dma()
+{
+ if (can_use_virtual_dma & 1) {
+ fd_ops = &virt_dma_ops;
+ return 0;
+ }
+ else {
+ fd_ops = &real_dma_ops;
+ return request_dma(FLOPPY_DMA, "floppy");
+ }
+}
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Again, the CMOS information not available
+ */
+#define FLOPPY0_TYPE 6
+#define FLOPPY1_TYPE 0
+
+#define N_FDC 2 /* Don't change this! */
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+/*
+ * The PowerPC has no problems with floppy DMA crossing 64k borders.
+ */
+#define CROSS_64KB(a,s) (0)
+
+#endif /* __ASM_PPC_FLOPPY_H */
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/fsl_ocp.h b/include/asm-ppc/fsl_ocp.h
new file mode 100644
index 0000000..050fbba
--- /dev/null
+++ b/include/asm-ppc/fsl_ocp.h
@@ -0,0 +1,54 @@
+/*
+ * include/asm-ppc/fsl_ocp.h
+ *
+ * Definitions for the on-chip peripherals on Freescale PPC processors
+ *
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_FS_OCP_H__
+#define __ASM_FS_OCP_H__
+
+/* A table of information for supporting the Gianfar Ethernet Controller
+ * This helps identify which enet controller we are dealing with,
+ * and what type of enet controller it is
+ */
+struct ocp_gfar_data {
+ uint interruptTransmit;
+ uint interruptError;
+ uint interruptReceive;
+ uint interruptPHY;
+ uint flags;
+ uint phyid;
+ uint phyregidx;
+ unsigned char mac_addr[6];
+};
+
+/* Flags in the flags field */
+#define GFAR_HAS_COALESCE 0x20
+#define GFAR_HAS_RMON 0x10
+#define GFAR_HAS_MULTI_INTR 0x08
+#define GFAR_FIRM_SET_MACADDR 0x04
+#define GFAR_HAS_PHY_INTR 0x02 /* if not set use a timer */
+#define GFAR_HAS_GIGABIT 0x01
+
+/* Data structure for I2C support. Just contains a couple flags
+ * to distinguish various I2C implementations*/
+struct ocp_fs_i2c_data {
+ uint flags;
+};
+
+/* Flags for I2C */
+#define FS_I2C_SEPARATE_DFSRR 0x02
+#define FS_I2C_CLOCK_5200 0x01
+
+#endif /* __ASM_FS_OCP_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/gg2.h b/include/asm-ppc/gg2.h
new file mode 100644
index 0000000..341ae55
--- /dev/null
+++ b/include/asm-ppc/gg2.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions
+ *
+ * Copyright (C) 1997 Geert Uytterhoeven
+ *
+ * This file is based on the following documentation:
+ *
+ * The VAS96011/12 Chipset, Data Book, Edition 1.0
+ * VLSI Technology, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASMPPC_GG2_H
+#define _ASMPPC_GG2_H
+
+ /*
+ * Memory Map (CHRP mode)
+ */
+
+#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */
+#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */
+#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */
+#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */
+#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */
+ /* special PCI cycles */
+#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */
+#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */
+
+
+ /*
+ * GG2 specific PCI Registers
+ */
+
+extern void __iomem *gg2_pci_config_base; /* kernel virtual address */
+
+#define GG2_PCI_BUSNO 0x40 /* Bus number */
+#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */
+#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */
+#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */
+#define GG2_PCI_ADDR_MAP 0x5c /* Address map */
+#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */
+#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */
+#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */
+#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */
+#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */
+#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */
+#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */
+#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */
+#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */
+#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */
+#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */
+#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */
+#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */
+#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */
+#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */
+ /* Cleared when read */
+
+#endif /* _ASMPPC_GG2_H */
diff --git a/include/asm-ppc/gt64260.h b/include/asm-ppc/gt64260.h
new file mode 100644
index 0000000..cd0ef64
--- /dev/null
+++ b/include/asm-ppc/gt64260.h
@@ -0,0 +1,322 @@
+/*
+ * include/asm-ppc/gt64260.h
+ *
+ * Prototypes, etc. for the Marvell/Galileo GT64260 host bridge routines.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASMPPC_GT64260_H
+#define __ASMPPC_GT64260_H
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/gt64260_defs.h>
+
+
+extern u32 gt64260_base;
+extern u32 gt64260_irq_base; /* We handle the next 96 IRQs from here */
+extern u32 gt64260_revision;
+extern u8 gt64260_pci_exclude_bridge;
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/* IRQs defined by the 64260 */
+#define GT64260_IRQ_MPSC0 40
+#define GT64260_IRQ_MPSC1 42
+#define GT64260_IRQ_SDMA 36
+
+/*
+ * Define a default physical memory map to be set up on the bridge.
+ * Also define a struct to pass that info from board-specific routines to
+ * GT64260 generic set up routines. By passing this info in, the board
+ * support developer can modify it at will.
+ */
+
+/*
+ * This is the default memory map:
+ * CPU PCI
+ * --- ---
+ * PCI 0 I/O: 0xfa000000-0xfaffffff 0x00000000-0x00ffffff
+ * PCI 1 I/O: 0xfb000000-0xfbffffff 0x01000000-0x01ffffff
+ * PCI 0 MEM: 0x80000000-0x8fffffff 0x80000000-0x8fffffff
+ * PCI 1 MEM: 0x90000000-0x9fffffff 0x90000000-0x9fffffff
+ */
+
+/* Default physical memory map for the GT64260 bridge */
+
+/*
+ * PCI Bus 0 Definitions
+ */
+#define GT64260_PCI_0_IO_SIZE 0x01000000U
+#define GT64260_PCI_0_MEM_SIZE 0x10000000U
+
+/* Processor Physical addresses */
+#define GT64260_PCI_0_IO_START_PROC 0xfa000000U
+#define GT64260_PCI_0_IO_END_PROC (GT64260_PCI_0_IO_START_PROC + \
+ GT64260_PCI_0_IO_SIZE - 1)
+
+/* PCI 0 addresses */
+#define GT64260_PCI_0_IO_START 0x00000000U
+#define GT64260_PCI_0_IO_END (GT64260_PCI_0_IO_START + \
+ GT64260_PCI_0_IO_SIZE - 1)
+
+/* Processor Physical addresses */
+#define GT64260_PCI_0_MEM_START_PROC 0x80000000U
+#define GT64260_PCI_0_MEM_END_PROC (GT64260_PCI_0_MEM_START_PROC + \
+ GT64260_PCI_0_MEM_SIZE - 1)
+
+/* PCI 0 addresses */
+#define GT64260_PCI_0_MEM_START 0x80000000U
+#define GT64260_PCI_0_MEM_END (GT64260_PCI_0_MEM_START + \
+ GT64260_PCI_0_MEM_SIZE - 1)
+
+/*
+ * PCI Bus 1 Definitions
+ */
+#define GT64260_PCI_1_IO_SIZE 0x01000000U
+#define GT64260_PCI_1_MEM_SIZE 0x10000000U
+
+/* PCI 1 addresses */
+#define GT64260_PCI_1_IO_START 0x01000000U
+#define GT64260_PCI_1_IO_END (GT64260_PCI_1_IO_START + \
+ GT64260_PCI_1_IO_SIZE - 1)
+
+/* Processor Physical addresses */
+#define GT64260_PCI_1_IO_START_PROC 0xfb000000U
+#define GT64260_PCI_1_IO_END_PROC (GT64260_PCI_1_IO_START_PROC + \
+ GT64260_PCI_1_IO_SIZE - 1)
+
+/* PCI 1 addresses */
+#define GT64260_PCI_1_MEM_START 0x90000000U
+#define GT64260_PCI_1_MEM_END (GT64260_PCI_1_MEM_START + \
+ GT64260_PCI_1_MEM_SIZE - 1)
+
+/* Processor Physical addresses */
+#define GT64260_PCI_1_MEM_START_PROC 0x90000000U
+#define GT64260_PCI_1_MEM_END_PROC (GT64260_PCI_1_MEM_START_PROC + \
+ GT64260_PCI_1_MEM_SIZE - 1)
+
+/* Define struct to pass mem-map info into gt64260_common.c code */
+typedef struct {
+ struct pci_controller *hose_a;
+ struct pci_controller *hose_b;
+
+ u32 mem_size;
+
+ u32 pci_0_io_start_proc;
+ u32 pci_0_io_start_pci;
+ u32 pci_0_io_size;
+ u32 pci_0_io_swap;
+
+ u32 pci_0_mem_start_proc;
+ u32 pci_0_mem_start_pci_hi;
+ u32 pci_0_mem_start_pci_lo;
+ u32 pci_0_mem_size;
+ u32 pci_0_mem_swap;
+
+ u32 pci_1_io_start_proc;
+ u32 pci_1_io_start_pci;
+ u32 pci_1_io_size;
+ u32 pci_1_io_swap;
+
+ u32 pci_1_mem_start_proc;
+ u32 pci_1_mem_start_pci_hi;
+ u32 pci_1_mem_start_pci_lo;
+ u32 pci_1_mem_size;
+ u32 pci_1_mem_swap;
+} gt64260_bridge_info_t;
+
+#define GT64260_BRIDGE_INFO_DEFAULT(ip, ms) { \
+ (ip)->mem_size = (ms); \
+ \
+ (ip)->pci_0_io_start_proc = GT64260_PCI_0_IO_START_PROC; \
+ (ip)->pci_0_io_start_pci = GT64260_PCI_0_IO_START; \
+ (ip)->pci_0_io_size = GT64260_PCI_0_IO_SIZE; \
+ (ip)->pci_0_io_swap = GT64260_CPU_PCI_SWAP_NONE; \
+ \
+ (ip)->pci_0_mem_start_proc = GT64260_PCI_0_MEM_START_PROC; \
+ (ip)->pci_0_mem_start_pci_hi = 0x00000000; \
+ (ip)->pci_0_mem_start_pci_lo = GT64260_PCI_0_MEM_START; \
+ (ip)->pci_0_mem_size = GT64260_PCI_0_MEM_SIZE; \
+ (ip)->pci_0_mem_swap = GT64260_CPU_PCI_SWAP_NONE; \
+ \
+ (ip)->pci_1_io_start_proc = GT64260_PCI_1_IO_START_PROC; \
+ (ip)->pci_1_io_start_pci = GT64260_PCI_1_IO_START; \
+ (ip)->pci_1_io_size = GT64260_PCI_1_IO_SIZE; \
+ (ip)->pci_1_io_swap = GT64260_CPU_PCI_SWAP_NONE; \
+ \
+ (ip)->pci_1_mem_start_proc = GT64260_PCI_1_MEM_START_PROC; \
+ (ip)->pci_1_mem_start_pci_hi = 0x00000000; \
+ (ip)->pci_1_mem_start_pci_lo = GT64260_PCI_1_MEM_START; \
+ (ip)->pci_1_mem_size = GT64260_PCI_1_MEM_SIZE; \
+ (ip)->pci_1_mem_swap = GT64260_CPU_PCI_SWAP_NONE; \
+}
+
+/*
+ *****************************************************************************
+ *
+ * I/O macros to access the 64260's registers
+ *
+ *****************************************************************************
+ */
+
+extern inline uint32_t gt_read(uint32_t offs){
+ return (in_le32((volatile uint *)(gt64260_base + offs)));
+}
+extern inline void gt_write(uint32_t offs, uint32_t d){
+ out_le32((volatile uint *)(gt64260_base + offs), d);
+}
+
+#if 0 /* paranoid SMP version */
+extern inline void gt_modify(u32 offs, u32 data, u32 mask) \
+{
+ uint32_t reg;
+ spin_lock(>64260_lock);
+ reg = gt_read(offs) & (~mask); /* zero any bits we care about*/
+ reg |= data & mask; /* set bits from the data */
+ gt_write(offs, reg);
+ spin_unlock(>64260_lock);
+}
+#else
+extern inline void gt_modify(uint32_t offs, uint32_t data, uint32_t mask)
+{
+ uint32_t reg;
+ reg = gt_read(offs) & (~(mask)); /* zero any bits we care about*/
+ reg |= (data) & (mask); /* set bits from the data */
+ gt_write(offs, reg);
+}
+#endif
+#define gt_set_bits(offs, bits) gt_modify(offs, ~0, bits)
+
+#define gt_clr_bits(offs, bits) gt_modify(offs, 0, bits)
+
+
+/*
+ *****************************************************************************
+ *
+ * Function Prototypes
+ *
+ *****************************************************************************
+ */
+
+int gt64260_find_bridges(u32 phys_base_addr, gt64260_bridge_info_t *info,
+ int ((*map_irq)(struct pci_dev *, unsigned char, unsigned char)));
+int gt64260_bridge_init(gt64260_bridge_info_t *info);
+int gt64260_cpu_scs_set_window(u32 window,
+ u32 base_addr,
+ u32 size);
+int gt64260_cpu_cs_set_window(u32 window,
+ u32 base_addr,
+ u32 size);
+int gt64260_cpu_boot_set_window(u32 base_addr,
+ u32 size);
+int gt64260_cpu_set_pci_io_window(u32 pci_bus,
+ u32 cpu_base_addr,
+ u32 pci_base_addr,
+ u32 size,
+ u32 swap);
+int gt64260_cpu_set_pci_mem_window(u32 pci_bus,
+ u32 window,
+ u32 cpu_base_addr,
+ u32 pci_base_addr_hi,
+ u32 pci_base_addr_lo,
+ u32 size,
+ u32 swap_64bit);
+int gt64260_cpu_prot_set_window(u32 window,
+ u32 base_addr,
+ u32 size,
+ u32 access_bits);
+int gt64260_cpu_snoop_set_window(u32 window,
+ u32 base_addr,
+ u32 size,
+ u32 snoop_type);
+void gt64260_cpu_disable_all_windows(void);
+int gt64260_pci_bar_enable(u32 pci_bus, u32 enable_bits);
+int gt64260_pci_slave_scs_set_window(struct pci_controller *hose,
+ u32 window,
+ u32 pci_base_addr,
+ u32 cpu_base_addr,
+ u32 size);
+int gt64260_pci_slave_cs_set_window(struct pci_controller *hose,
+ u32 window,
+ u32 pci_base_addr,
+ u32 cpu_base_addr,
+ u32 size);
+int gt64260_pci_slave_boot_set_window(struct pci_controller *hose,
+ u32 pci_base_addr,
+ u32 cpu_base_addr,
+ u32 size);
+int gt64260_pci_slave_p2p_mem_set_window(struct pci_controller *hose,
+ u32 window,
+ u32 pci_base_addr,
+ u32 other_bus_base_addr,
+ u32 size);
+int gt64260_pci_slave_p2p_io_set_window(struct pci_controller *hose,
+ u32 pci_base_addr,
+ u32 other_bus_base_addr,
+ u32 size);
+int gt64260_pci_slave_dac_scs_set_window(struct pci_controller *hose,
+ u32 window,
+ u32 pci_base_addr_hi,
+ u32 pci_base_addr_lo,
+ u32 cpu_base_addr,
+ u32 size);
+int gt64260_pci_slave_dac_cs_set_window(struct pci_controller *hose,
+ u32 window,
+ u32 pci_base_addr_hi,
+ u32 pci_base_addr_lo,
+ u32 cpu_base_addr,
+ u32 size);
+int gt64260_pci_slave_dac_boot_set_window(struct pci_controller *hose,
+ u32 pci_base_addr_hi,
+ u32 pci_base_addr_lo,
+ u32 cpu_base_addr,
+ u32 size);
+int gt64260_pci_slave_dac_p2p_mem_set_window(struct pci_controller *hose,
+ u32 window,
+ u32 pci_base_addr_hi,
+ u32 pci_base_addr_lo,
+ u32 other_bus_base_addr,
+ u32 size);
+int gt64260_pci_acc_cntl_set_window(u32 pci_bus,
+ u32 window,
+ u32 base_addr_hi,
+ u32 base_addr_lo,
+ u32 size,
+ u32 features);
+int gt64260_pci_snoop_set_window(u32 pci_bus,
+ u32 window,
+ u32 base_addr_hi,
+ u32 base_addr_lo,
+ u32 size,
+ u32 snoop_type);
+int gt64260_set_base(u32 new_base);
+int gt64260_get_base(u32 *base);
+int gt64260_pci_exclude_device(u8 bus, u8 devfn);
+
+void gt64260_init_irq(void);
+int gt64260_get_irq(struct pt_regs *regs);
+
+void gt64260_mpsc_progress(char *s, unsigned short hex);
+
+#endif /* __ASMPPC_GT64260_H */
diff --git a/include/asm-ppc/gt64260_defs.h b/include/asm-ppc/gt64260_defs.h
new file mode 100644
index 0000000..6ffd01a
--- /dev/null
+++ b/include/asm-ppc/gt64260_defs.h
@@ -0,0 +1,1010 @@
+/*
+ * include/asm-ppc/gt64260_defs.h
+ *
+ * Register definitions for the Marvell/Galileo GT64260 host bridge.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASMPPC_GT64260_DEFS_H
+#define __ASMPPC_GT64260_DEFS_H
+
+/*
+ * Define a macro to represent the supported version of the 64260.
+ */
+#define GT64260 0x01
+#define GT64260A 0x10
+
+/*
+ *****************************************************************************
+ *
+ * CPU Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* CPU physical address of 64260's registers */
+#define GT64260_INTERNAL_SPACE_DECODE 0x0068
+#define GT64260_INTERNAL_SPACE_SIZE 0x10000
+#define GT64260_INTERNAL_SPACE_DEFAULT_ADDR 0x14000000
+
+/* CPU Memory Controller Window Registers (4 windows) */
+#define GT64260_CPU_SCS_DECODE_WINDOWS 4
+
+#define GT64260_CPU_SCS_DECODE_0_BOT 0x0008
+#define GT64260_CPU_SCS_DECODE_0_TOP 0x0010
+#define GT64260_CPU_SCS_DECODE_1_BOT 0x0208
+#define GT64260_CPU_SCS_DECODE_1_TOP 0x0210
+#define GT64260_CPU_SCS_DECODE_2_BOT 0x0018
+#define GT64260_CPU_SCS_DECODE_2_TOP 0x0020
+#define GT64260_CPU_SCS_DECODE_3_BOT 0x0218
+#define GT64260_CPU_SCS_DECODE_3_TOP 0x0220
+
+/* CPU Device Controller Window Registers (4 windows) */
+#define GT64260_CPU_CS_DECODE_WINDOWS 4
+
+#define GT64260_CPU_CS_DECODE_0_BOT 0x0028
+#define GT64260_CPU_CS_DECODE_0_TOP 0x0030
+#define GT64260_CPU_CS_DECODE_1_BOT 0x0228
+#define GT64260_CPU_CS_DECODE_1_TOP 0x0230
+#define GT64260_CPU_CS_DECODE_2_BOT 0x0248
+#define GT64260_CPU_CS_DECODE_2_TOP 0x0250
+#define GT64260_CPU_CS_DECODE_3_BOT 0x0038
+#define GT64260_CPU_CS_DECODE_3_TOP 0x0040
+
+#define GT64260_CPU_BOOT_CS_DECODE_0_BOT 0x0238
+#define GT64260_CPU_BOOT_CS_DECODE_0_TOP 0x0240
+
+/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */
+#define GT64260_PCI_BUSES 2
+#define GT64260_PCI_IO_WINDOWS_PER_BUS 1
+#define GT64260_PCI_MEM_WINDOWS_PER_BUS 4
+
+#define GT64260_CPU_PCI_SWAP_BYTE 0x00000000
+#define GT64260_CPU_PCI_SWAP_NONE 0x01000000
+#define GT64260_CPU_PCI_SWAP_BYTE_WORD 0x02000000
+#define GT64260_CPU_PCI_SWAP_WORD 0x03000000
+#define GT64260_CPU_PCI_SWAP_MASK 0x07000000
+
+#define GT64260_CPU_PCI_MEM_REQ64 (1<<27)
+
+#define GT64260_CPU_PCI_0_IO_DECODE_BOT 0x0048
+#define GT64260_CPU_PCI_0_IO_DECODE_TOP 0x0050
+#define GT64260_CPU_PCI_0_MEM_0_DECODE_BOT 0x0058
+#define GT64260_CPU_PCI_0_MEM_0_DECODE_TOP 0x0060
+#define GT64260_CPU_PCI_0_MEM_1_DECODE_BOT 0x0080
+#define GT64260_CPU_PCI_0_MEM_1_DECODE_TOP 0x0088
+#define GT64260_CPU_PCI_0_MEM_2_DECODE_BOT 0x0258
+#define GT64260_CPU_PCI_0_MEM_2_DECODE_TOP 0x0260
+#define GT64260_CPU_PCI_0_MEM_3_DECODE_BOT 0x0280
+#define GT64260_CPU_PCI_0_MEM_3_DECODE_TOP 0x0288
+
+#define GT64260_CPU_PCI_0_IO_REMAP 0x00f0
+#define GT64260_CPU_PCI_0_MEM_0_REMAP_LO 0x00f8
+#define GT64260_CPU_PCI_0_MEM_0_REMAP_HI 0x0320
+#define GT64260_CPU_PCI_0_MEM_1_REMAP_LO 0x0100
+#define GT64260_CPU_PCI_0_MEM_1_REMAP_HI 0x0328
+#define GT64260_CPU_PCI_0_MEM_2_REMAP_LO 0x02f8
+#define GT64260_CPU_PCI_0_MEM_2_REMAP_HI 0x0330
+#define GT64260_CPU_PCI_0_MEM_3_REMAP_LO 0x0300
+#define GT64260_CPU_PCI_0_MEM_3_REMAP_HI 0x0338
+
+#define GT64260_CPU_PCI_1_IO_DECODE_BOT 0x0090
+#define GT64260_CPU_PCI_1_IO_DECODE_TOP 0x0098
+#define GT64260_CPU_PCI_1_MEM_0_DECODE_BOT 0x00a0
+#define GT64260_CPU_PCI_1_MEM_0_DECODE_TOP 0x00a8
+#define GT64260_CPU_PCI_1_MEM_1_DECODE_BOT 0x00b0
+#define GT64260_CPU_PCI_1_MEM_1_DECODE_TOP 0x00b8
+#define GT64260_CPU_PCI_1_MEM_2_DECODE_BOT 0x02a0
+#define GT64260_CPU_PCI_1_MEM_2_DECODE_TOP 0x02a8
+#define GT64260_CPU_PCI_1_MEM_3_DECODE_BOT 0x02b0
+#define GT64260_CPU_PCI_1_MEM_3_DECODE_TOP 0x02b8
+
+#define GT64260_CPU_PCI_1_IO_REMAP 0x0108
+#define GT64260_CPU_PCI_1_MEM_0_REMAP_LO 0x0110
+#define GT64260_CPU_PCI_1_MEM_0_REMAP_HI 0x0340
+#define GT64260_CPU_PCI_1_MEM_1_REMAP_LO 0x0118
+#define GT64260_CPU_PCI_1_MEM_1_REMAP_HI 0x0348
+#define GT64260_CPU_PCI_1_MEM_2_REMAP_LO 0x0310
+#define GT64260_CPU_PCI_1_MEM_2_REMAP_HI 0x0350
+#define GT64260_CPU_PCI_1_MEM_3_REMAP_LO 0x0318
+#define GT64260_CPU_PCI_1_MEM_3_REMAP_HI 0x0358
+
+/* CPU Control Registers */
+#define GT64260_CPU_CONFIG 0x0000
+#define GT64260_CPU_MODE 0x0120
+#define GT64260_CPU_MASTER_CNTL 0x0160
+#define GT64260_CPU_XBAR_CNTL_LO 0x0150
+#define GT64260_CPU_XBAR_CNTL_HI 0x0158
+#define GT64260_CPU_XBAR_TO 0x0168
+#define GT64260_CPU_RR_XBAR_CNTL_LO 0x0170
+#define GT64260_CPU_RR_XBAR_CNTL_HI 0x0178
+
+/* CPU Sync Barrier Registers */
+#define GT64260_CPU_SYNC_BARRIER_PCI_0 0x00c0
+#define GT64260_CPU_SYNC_BARRIER_PCI_1 0x00c8
+
+/* CPU Access Protection Registers */
+#define GT64260_CPU_PROT_WINDOWS 8
+
+#define GT64260_CPU_PROT_ACCPROTECT (1<<16)
+#define GT64260_CPU_PROT_WRPROTECT (1<<17)
+#define GT64260_CPU_PROT_CACHEPROTECT (1<<18)
+
+#define GT64260_CPU_PROT_BASE_0 0x0180
+#define GT64260_CPU_PROT_TOP_0 0x0188
+#define GT64260_CPU_PROT_BASE_1 0x0190
+#define GT64260_CPU_PROT_TOP_1 0x0198
+#define GT64260_CPU_PROT_BASE_2 0x01a0
+#define GT64260_CPU_PROT_TOP_2 0x01a8
+#define GT64260_CPU_PROT_BASE_3 0x01b0
+#define GT64260_CPU_PROT_TOP_3 0x01b8
+#define GT64260_CPU_PROT_BASE_4 0x01c0
+#define GT64260_CPU_PROT_TOP_4 0x01c8
+#define GT64260_CPU_PROT_BASE_5 0x01d0
+#define GT64260_CPU_PROT_TOP_5 0x01d8
+#define GT64260_CPU_PROT_BASE_6 0x01e0
+#define GT64260_CPU_PROT_TOP_6 0x01e8
+#define GT64260_CPU_PROT_BASE_7 0x01f0
+#define GT64260_CPU_PROT_TOP_7 0x01f8
+
+/* CPU Snoop Control Registers */
+#define GT64260_CPU_SNOOP_WINDOWS 4
+
+#define GT64260_CPU_SNOOP_NONE 0x00000000
+#define GT64260_CPU_SNOOP_WT 0x00010000
+#define GT64260_CPU_SNOOP_WB 0x00020000
+#define GT64260_CPU_SNOOP_MASK 0x00030000
+#define GT64260_CPU_SNOOP_ALL_BITS GT64260_CPU_SNOOP_MASK
+
+#define GT64260_CPU_SNOOP_BASE_0 0x0380
+#define GT64260_CPU_SNOOP_TOP_0 0x0388
+#define GT64260_CPU_SNOOP_BASE_1 0x0390
+#define GT64260_CPU_SNOOP_TOP_1 0x0398
+#define GT64260_CPU_SNOOP_BASE_2 0x03a0
+#define GT64260_CPU_SNOOP_TOP_2 0x03a8
+#define GT64260_CPU_SNOOP_BASE_3 0x03b0
+#define GT64260_CPU_SNOOP_TOP_3 0x03b8
+
+/* CPU Error Report Registers */
+#define GT64260_CPU_ERR_ADDR_LO 0x0070
+#define GT64260_CPU_ERR_ADDR_HI 0x0078
+#define GT64260_CPU_ERR_DATA_LO 0x0128
+#define GT64260_CPU_ERR_DATA_HI 0x0130
+#define GT64260_CPU_ERR_PARITY 0x0138
+#define GT64260_CPU_ERR_CAUSE 0x0140
+#define GT64260_CPU_ERR_MASK 0x0148
+
+
+/*
+ *****************************************************************************
+ *
+ * SDRAM Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+/* SDRAM Config Registers */
+#define GT64260_SDRAM_CONFIG 0x0448
+#define GT64260_SDRAM_OPERATION_MODE 0x0474
+#define GT64260_SDRAM_ADDR_CNTL 0x047c
+#define GT64260_SDRAM_TIMING_PARAMS 0x04b4
+#define GT64260_SDRAM_UMA_CNTL 0x04a4
+#define GT64260_SDRAM_XBAR_CNTL_LO 0x04a8
+#define GT64260_SDRAM_XBAR_CNTL_HI 0x04ac
+#define GT64260_SDRAM_XBAR_CNTL_TO 0x04b0
+
+/* SDRAM Banks Parameters Registers */
+#define GT64260_SDRAM_BANK_PARAMS_0 0x044c
+#define GT64260_SDRAM_BANK_PARAMS_1 0x0450
+#define GT64260_SDRAM_BANK_PARAMS_2 0x0454
+#define GT64260_SDRAM_BANK_PARAMS_3 0x0458
+
+/* SDRAM Error Report Registers */
+#define GT64260_SDRAM_ERR_DATA_LO 0x0484
+#define GT64260_SDRAM_ERR_DATA_HI 0x0480
+#define GT64260_SDRAM_ERR_ADDR 0x0490
+#define GT64260_SDRAM_ERR_ECC_RCVD 0x0488
+#define GT64260_SDRAM_ERR_ECC_CALC 0x048c
+#define GT64260_SDRAM_ERR_ECC_CNTL 0x0494
+#define GT64260_SDRAM_ERR_ECC_ERR_CNT 0x0498
+
+
+/*
+ *****************************************************************************
+ *
+ * Device/BOOT Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+/* Device Control Registers */
+#define GT64260_DEV_BANK_PARAMS_0 0x045c
+#define GT64260_DEV_BANK_PARAMS_1 0x0460
+#define GT64260_DEV_BANK_PARAMS_2 0x0464
+#define GT64260_DEV_BANK_PARAMS_3 0x0468
+#define GT64260_DEV_BOOT_PARAMS 0x046c
+#define GT64260_DEV_IF_CNTL 0x04c0
+#define GT64260_DEV_IF_XBAR_CNTL_LO 0x04c8
+#define GT64260_DEV_IF_XBAR_CNTL_HI 0x04cc
+#define GT64260_DEV_IF_XBAR_CNTL_TO 0x04c4
+
+/* Device Interrupt Registers */
+#define GT64260_DEV_INTR_CAUSE 0x04d0
+#define GT64260_DEV_INTR_MASK 0x04d4
+#define GT64260_DEV_INTR_ERR_ADDR 0x04d8
+
+
+/*
+ *****************************************************************************
+ *
+ * PCI Bridge Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* PCI Configuration Access Registers */
+#define GT64260_PCI_0_CONFIG_ADDR 0x0cf8
+#define GT64260_PCI_0_CONFIG_DATA 0x0cfc
+#define GT64260_PCI_0_IACK 0x0c34
+
+#define GT64260_PCI_1_CONFIG_ADDR 0x0c78
+#define GT64260_PCI_1_CONFIG_DATA 0x0c7c
+#define GT64260_PCI_1_IACK 0x0cb4
+
+/* PCI Control Registers */
+#define GT64260_PCI_0_CMD 0x0c00
+#define GT64260_PCI_0_MODE 0x0d00
+#define GT64260_PCI_0_TO_RETRY 0x0c04
+#define GT64260_PCI_0_RD_BUF_DISCARD_TIMER 0x0d04
+#define GT64260_PCI_0_MSI_TRIGGER_TIMER 0x0c38
+#define GT64260_PCI_0_ARBITER_CNTL 0x1d00
+#define GT64260_PCI_0_XBAR_CNTL_LO 0x1d08
+#define GT64260_PCI_0_XBAR_CNTL_HI 0x1d0c
+#define GT64260_PCI_0_XBAR_CNTL_TO 0x1d04
+#define GT64260_PCI_0_RD_RESP_XBAR_CNTL_LO 0x1d18
+#define GT64260_PCI_0_RD_RESP_XBAR_CNTL_HI 0x1d1c
+#define GT64260_PCI_0_SYNC_BARRIER 0x1d10
+#define GT64260_PCI_0_P2P_CONFIG 0x1d14
+#define GT64260_PCI_0_P2P_SWAP_CNTL 0x1d54
+
+#define GT64260_PCI_1_CMD 0x0c80
+#define GT64260_PCI_1_MODE 0x0d80
+#define GT64260_PCI_1_TO_RETRY 0x0c84
+#define GT64260_PCI_1_RD_BUF_DISCARD_TIMER 0x0d84
+#define GT64260_PCI_1_MSI_TRIGGER_TIMER 0x0cb8
+#define GT64260_PCI_1_ARBITER_CNTL 0x1d80
+#define GT64260_PCI_1_XBAR_CNTL_LO 0x1d88
+#define GT64260_PCI_1_XBAR_CNTL_HI 0x1d8c
+#define GT64260_PCI_1_XBAR_CNTL_TO 0x1d84
+#define GT64260_PCI_1_RD_RESP_XBAR_CNTL_LO 0x1d98
+#define GT64260_PCI_1_RD_RESP_XBAR_CNTL_HI 0x1d9c
+#define GT64260_PCI_1_SYNC_BARRIER 0x1d90
+#define GT64260_PCI_1_P2P_CONFIG 0x1d94
+#define GT64260_PCI_1_P2P_SWAP_CNTL 0x1dd4
+
+/* PCI Access Control Regions Registers */
+#define GT64260_PCI_ACC_CNTL_WINDOWS 8
+
+#define GT64260_PCI_ACC_CNTL_PREFETCHEN (1<<12)
+#define GT64260_PCI_ACC_CNTL_DREADEN (1<<13)
+#define GT64260_PCI_ACC_CNTL_RDPREFETCH (1<<16)
+#define GT64260_PCI_ACC_CNTL_RDLINEPREFETCH (1<<17)
+#define GT64260_PCI_ACC_CNTL_RDMULPREFETCH (1<<18)
+#define GT64260_PCI_ACC_CNTL_MBURST_4_WORDS 0x00000000
+#define GT64260_PCI_ACC_CNTL_MBURST_8_WORDS 0x00100000
+#define GT64260_PCI_ACC_CNTL_MBURST_16_WORDS 0x00200000
+#define GT64260_PCI_ACC_CNTL_MBURST_MASK 0x00300000
+#define GT64260_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
+#define GT64260_PCI_ACC_CNTL_SWAP_NONE 0x01000000
+#define GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x02000000
+#define GT64260_PCI_ACC_CNTL_SWAP_WORD 0x03000000
+#define GT64260_PCI_ACC_CNTL_SWAP_MASK 0x03000000
+#define GT64260_PCI_ACC_CNTL_ACCPROT (1<<28)
+#define GT64260_PCI_ACC_CNTL_WRPROT (1<<29)
+
+#define GT64260_PCI_ACC_CNTL_ALL_BITS (GT64260_PCI_ACC_CNTL_PREFETCHEN | \
+ GT64260_PCI_ACC_CNTL_DREADEN | \
+ GT64260_PCI_ACC_CNTL_RDPREFETCH | \
+ GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\
+ GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \
+ GT64260_PCI_ACC_CNTL_MBURST_MASK | \
+ GT64260_PCI_ACC_CNTL_SWAP_MASK | \
+ GT64260_PCI_ACC_CNTL_ACCPROT| \
+ GT64260_PCI_ACC_CNTL_WRPROT)
+
+#define GT64260_PCI_0_ACC_CNTL_0_BASE_LO 0x1e00
+#define GT64260_PCI_0_ACC_CNTL_0_BASE_HI 0x1e04
+#define GT64260_PCI_0_ACC_CNTL_0_TOP 0x1e08
+#define GT64260_PCI_0_ACC_CNTL_1_BASE_LO 0x1e10
+#define GT64260_PCI_0_ACC_CNTL_1_BASE_HI 0x1e14
+#define GT64260_PCI_0_ACC_CNTL_1_TOP 0x1e18
+#define GT64260_PCI_0_ACC_CNTL_2_BASE_LO 0x1e20
+#define GT64260_PCI_0_ACC_CNTL_2_BASE_HI 0x1e24
+#define GT64260_PCI_0_ACC_CNTL_2_TOP 0x1e28
+#define GT64260_PCI_0_ACC_CNTL_3_BASE_LO 0x1e30
+#define GT64260_PCI_0_ACC_CNTL_3_BASE_HI 0x1e34
+#define GT64260_PCI_0_ACC_CNTL_3_TOP 0x1e38
+#define GT64260_PCI_0_ACC_CNTL_4_BASE_LO 0x1e40
+#define GT64260_PCI_0_ACC_CNTL_4_BASE_HI 0x1e44
+#define GT64260_PCI_0_ACC_CNTL_4_TOP 0x1e48
+#define GT64260_PCI_0_ACC_CNTL_5_BASE_LO 0x1e50
+#define GT64260_PCI_0_ACC_CNTL_5_BASE_HI 0x1e54
+#define GT64260_PCI_0_ACC_CNTL_5_TOP 0x1e58
+#define GT64260_PCI_0_ACC_CNTL_6_BASE_LO 0x1e60
+#define GT64260_PCI_0_ACC_CNTL_6_BASE_HI 0x1e64
+#define GT64260_PCI_0_ACC_CNTL_6_TOP 0x1e68
+#define GT64260_PCI_0_ACC_CNTL_7_BASE_LO 0x1e70
+#define GT64260_PCI_0_ACC_CNTL_7_BASE_HI 0x1e74
+#define GT64260_PCI_0_ACC_CNTL_7_TOP 0x1e78
+
+#define GT64260_PCI_1_ACC_CNTL_0_BASE_LO 0x1e80
+#define GT64260_PCI_1_ACC_CNTL_0_BASE_HI 0x1e84
+#define GT64260_PCI_1_ACC_CNTL_0_TOP 0x1e88
+#define GT64260_PCI_1_ACC_CNTL_1_BASE_LO 0x1e90
+#define GT64260_PCI_1_ACC_CNTL_1_BASE_HI 0x1e94
+#define GT64260_PCI_1_ACC_CNTL_1_TOP 0x1e98
+#define GT64260_PCI_1_ACC_CNTL_2_BASE_LO 0x1ea0
+#define GT64260_PCI_1_ACC_CNTL_2_BASE_HI 0x1ea4
+#define GT64260_PCI_1_ACC_CNTL_2_TOP 0x1ea8
+#define GT64260_PCI_1_ACC_CNTL_3_BASE_LO 0x1eb0
+#define GT64260_PCI_1_ACC_CNTL_3_BASE_HI 0x1eb4
+#define GT64260_PCI_1_ACC_CNTL_3_TOP 0x1eb8
+#define GT64260_PCI_1_ACC_CNTL_4_BASE_LO 0x1ec0
+#define GT64260_PCI_1_ACC_CNTL_4_BASE_HI 0x1ec4
+#define GT64260_PCI_1_ACC_CNTL_4_TOP 0x1ec8
+#define GT64260_PCI_1_ACC_CNTL_5_BASE_LO 0x1ed0
+#define GT64260_PCI_1_ACC_CNTL_5_BASE_HI 0x1ed4
+#define GT64260_PCI_1_ACC_CNTL_5_TOP 0x1ed8
+#define GT64260_PCI_1_ACC_CNTL_6_BASE_LO 0x1ee0
+#define GT64260_PCI_1_ACC_CNTL_6_BASE_HI 0x1ee4
+#define GT64260_PCI_1_ACC_CNTL_6_TOP 0x1ee8
+#define GT64260_PCI_1_ACC_CNTL_7_BASE_LO 0x1ef0
+#define GT64260_PCI_1_ACC_CNTL_7_BASE_HI 0x1ef4
+#define GT64260_PCI_1_ACC_CNTL_7_TOP 0x1ef8
+
+/* PCI Snoop Control Registers */
+#define GT64260_PCI_SNOOP_WINDOWS 4
+
+#define GT64260_PCI_SNOOP_NONE 0x00000000
+#define GT64260_PCI_SNOOP_WT 0x00001000
+#define GT64260_PCI_SNOOP_WB 0x00002000
+
+#define GT64260_PCI_0_SNOOP_0_BASE_LO 0x1f00
+#define GT64260_PCI_0_SNOOP_0_BASE_HI 0x1f04
+#define GT64260_PCI_0_SNOOP_0_TOP 0x1f08
+#define GT64260_PCI_0_SNOOP_1_BASE_LO 0x1f10
+#define GT64260_PCI_0_SNOOP_1_BASE_HI 0x1f14
+#define GT64260_PCI_0_SNOOP_1_TOP 0x1f18
+#define GT64260_PCI_0_SNOOP_2_BASE_LO 0x1f20
+#define GT64260_PCI_0_SNOOP_2_BASE_HI 0x1f24
+#define GT64260_PCI_0_SNOOP_2_TOP 0x1f28
+#define GT64260_PCI_0_SNOOP_3_BASE_LO 0x1f30
+#define GT64260_PCI_0_SNOOP_3_BASE_HI 0x1f34
+#define GT64260_PCI_0_SNOOP_3_TOP 0x1f38
+
+#define GT64260_PCI_1_SNOOP_0_BASE_LO 0x1f80
+#define GT64260_PCI_1_SNOOP_0_BASE_HI 0x1f84
+#define GT64260_PCI_1_SNOOP_0_TOP 0x1f88
+#define GT64260_PCI_1_SNOOP_1_BASE_LO 0x1f90
+#define GT64260_PCI_1_SNOOP_1_BASE_HI 0x1f94
+#define GT64260_PCI_1_SNOOP_1_TOP 0x1f98
+#define GT64260_PCI_1_SNOOP_2_BASE_LO 0x1fa0
+#define GT64260_PCI_1_SNOOP_2_BASE_HI 0x1fa4
+#define GT64260_PCI_1_SNOOP_2_TOP 0x1fa8
+#define GT64260_PCI_1_SNOOP_3_BASE_LO 0x1fb0
+#define GT64260_PCI_1_SNOOP_3_BASE_HI 0x1fb4
+#define GT64260_PCI_1_SNOOP_3_TOP 0x1fb8
+
+/* PCI Error Report Registers */
+#define GT64260_PCI_0_ERR_SERR_MASK 0x0c28
+#define GT64260_PCI_0_ERR_ADDR_LO 0x1d40
+#define GT64260_PCI_0_ERR_ADDR_HI 0x1d44
+#define GT64260_PCI_0_ERR_DATA_LO 0x1d48
+#define GT64260_PCI_0_ERR_DATA_HI 0x1d4c
+#define GT64260_PCI_0_ERR_CMD 0x1d50
+#define GT64260_PCI_0_ERR_CAUSE 0x1d58
+#define GT64260_PCI_0_ERR_MASK 0x1d5c
+
+#define GT64260_PCI_1_ERR_SERR_MASK 0x0ca8
+#define GT64260_PCI_1_ERR_ADDR_LO 0x1dc0
+#define GT64260_PCI_1_ERR_ADDR_HI 0x1dc4
+#define GT64260_PCI_1_ERR_DATA_LO 0x1dc8
+#define GT64260_PCI_1_ERR_DATA_HI 0x1dcc
+#define GT64260_PCI_1_ERR_CMD 0x1dd0
+#define GT64260_PCI_1_ERR_CAUSE 0x1dd8
+#define GT64260_PCI_1_ERR_MASK 0x1ddc
+
+/* PCI Slave Address Decoding Registers */
+#define GT64260_PCI_SCS_WINDOWS 4
+#define GT64260_PCI_CS_WINDOWS 4
+#define GT64260_PCI_BOOT_WINDOWS 1
+#define GT64260_PCI_P2P_MEM_WINDOWS 2
+#define GT64260_PCI_P2P_IO_WINDOWS 1
+#define GT64260_PCI_DAC_SCS_WINDOWS 4
+#define GT64260_PCI_DAC_CS_WINDOWS 4
+#define GT64260_PCI_DAC_BOOT_WINDOWS 1
+#define GT64260_PCI_DAC_P2P_MEM_WINDOWS 2
+
+#define GT64260_PCI_0_SLAVE_SCS_0_SIZE 0x0c08
+#define GT64260_PCI_0_SLAVE_SCS_1_SIZE 0x0d08
+#define GT64260_PCI_0_SLAVE_SCS_2_SIZE 0x0c0c
+#define GT64260_PCI_0_SLAVE_SCS_3_SIZE 0x0d0c
+#define GT64260_PCI_0_SLAVE_CS_0_SIZE 0x0c10
+#define GT64260_PCI_0_SLAVE_CS_1_SIZE 0x0d10
+#define GT64260_PCI_0_SLAVE_CS_2_SIZE 0x0d18
+#define GT64260_PCI_0_SLAVE_CS_3_SIZE 0x0c14
+#define GT64260_PCI_0_SLAVE_BOOT_SIZE 0x0d14
+#define GT64260_PCI_0_SLAVE_P2P_MEM_0_SIZE 0x0d1c
+#define GT64260_PCI_0_SLAVE_P2P_MEM_1_SIZE 0x0d20
+#define GT64260_PCI_0_SLAVE_P2P_IO_SIZE 0x0d24
+#define GT64260_PCI_0_SLAVE_CPU_SIZE 0x0d28
+
+#define GT64260_PCI_0_SLAVE_DAC_SCS_0_SIZE 0x0e00
+#define GT64260_PCI_0_SLAVE_DAC_SCS_1_SIZE 0x0e04
+#define GT64260_PCI_0_SLAVE_DAC_SCS_2_SIZE 0x0e08
+#define GT64260_PCI_0_SLAVE_DAC_SCS_3_SIZE 0x0e0c
+#define GT64260_PCI_0_SLAVE_DAC_CS_0_SIZE 0x0e10
+#define GT64260_PCI_0_SLAVE_DAC_CS_1_SIZE 0x0e14
+#define GT64260_PCI_0_SLAVE_DAC_CS_2_SIZE 0x0e18
+#define GT64260_PCI_0_SLAVE_DAC_CS_3_SIZE 0x0e1c
+#define GT64260_PCI_0_SLAVE_DAC_BOOT_SIZE 0x0e20
+#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_SIZE 0x0e24
+#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_SIZE 0x0e28
+#define GT64260_PCI_0_SLAVE_DAC_CPU_SIZE 0x0e2c
+
+#define GT64260_PCI_0_SLAVE_EXP_ROM_SIZE 0x0d2c
+
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_0 (1<<0)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_1 (1<<1)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_2 (1<<2)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_3 (1<<3)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_0 (1<<4)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_1 (1<<5)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_2 (1<<6)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_3 (1<<7)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_BOOT (1<<8)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_MEM (1<<9)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_IO (1<<10)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_0 (1<<11)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_1 (1<<12)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_IO (1<<13)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CPU (1<<14)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_0 (1<<15)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_1 (1<<16)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_2 (1<<17)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_3 (1<<18)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_0 (1<<19)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_1 (1<<20)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_2 (1<<21)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_3 (1<<22)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_BOOT (1<<23)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_0 (1<<24)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_1 (1<<25)
+#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CPU (1<<26)
+
+#define GT64260_PCI_0_SLAVE_BAR_REG_ENABLES 0x0c3c
+#define GT64260_PCI_0_SLAVE_SCS_0_REMAP 0x0c48
+#define GT64260_PCI_0_SLAVE_SCS_1_REMAP 0x0d48
+#define GT64260_PCI_0_SLAVE_SCS_2_REMAP 0x0c4c
+#define GT64260_PCI_0_SLAVE_SCS_3_REMAP 0x0d4c
+#define GT64260_PCI_0_SLAVE_CS_0_REMAP 0x0c50
+#define GT64260_PCI_0_SLAVE_CS_1_REMAP 0x0d50
+#define GT64260_PCI_0_SLAVE_CS_2_REMAP 0x0d58
+#define GT64260_PCI_0_SLAVE_CS_3_REMAP 0x0c54
+#define GT64260_PCI_0_SLAVE_BOOT_REMAP 0x0d54
+#define GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_LO 0x0d5c
+#define GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_HI 0x0d60
+#define GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_LO 0x0d64
+#define GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_HI 0x0d68
+#define GT64260_PCI_0_SLAVE_P2P_IO_REMAP 0x0d6c
+#define GT64260_PCI_0_SLAVE_CPU_REMAP 0x0d70
+
+#define GT64260_PCI_0_SLAVE_DAC_SCS_0_REMAP 0x0f00
+#define GT64260_PCI_0_SLAVE_DAC_SCS_1_REMAP 0x0f04
+#define GT64260_PCI_0_SLAVE_DAC_SCS_2_REMAP 0x0f08
+#define GT64260_PCI_0_SLAVE_DAC_SCS_3_REMAP 0x0f0c
+#define GT64260_PCI_0_SLAVE_DAC_CS_0_REMAP 0x0f10
+#define GT64260_PCI_0_SLAVE_DAC_CS_1_REMAP 0x0f14
+#define GT64260_PCI_0_SLAVE_DAC_CS_2_REMAP 0x0f18
+#define GT64260_PCI_0_SLAVE_DAC_CS_3_REMAP 0x0f1c
+#define GT64260_PCI_0_SLAVE_DAC_BOOT_REMAP 0x0f20
+#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_LO 0x0f24
+#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_HI 0x0f28
+#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_LO 0x0f2c
+#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_HI 0x0f30
+#define GT64260_PCI_0_SLAVE_DAC_CPU_REMAP 0x0f34
+
+#define GT64260_PCI_0_SLAVE_EXP_ROM_REMAP 0x0f38
+#define GT64260_PCI_0_SLAVE_PCI_DECODE_CNTL 0x0d3c
+
+#define GT64260_PCI_1_SLAVE_SCS_0_SIZE 0x0c88
+#define GT64260_PCI_1_SLAVE_SCS_1_SIZE 0x0d88
+#define GT64260_PCI_1_SLAVE_SCS_2_SIZE 0x0c8c
+#define GT64260_PCI_1_SLAVE_SCS_3_SIZE 0x0d8c
+#define GT64260_PCI_1_SLAVE_CS_0_SIZE 0x0c90
+#define GT64260_PCI_1_SLAVE_CS_1_SIZE 0x0d90
+#define GT64260_PCI_1_SLAVE_CS_2_SIZE 0x0d98
+#define GT64260_PCI_1_SLAVE_CS_3_SIZE 0x0c94
+#define GT64260_PCI_1_SLAVE_BOOT_SIZE 0x0d94
+#define GT64260_PCI_1_SLAVE_P2P_MEM_0_SIZE 0x0d9c
+#define GT64260_PCI_1_SLAVE_P2P_MEM_1_SIZE 0x0da0
+#define GT64260_PCI_1_SLAVE_P2P_IO_SIZE 0x0da4
+#define GT64260_PCI_1_SLAVE_CPU_SIZE 0x0da8
+
+#define GT64260_PCI_1_SLAVE_DAC_SCS_0_SIZE 0x0e80
+#define GT64260_PCI_1_SLAVE_DAC_SCS_1_SIZE 0x0e84
+#define GT64260_PCI_1_SLAVE_DAC_SCS_2_SIZE 0x0e88
+#define GT64260_PCI_1_SLAVE_DAC_SCS_3_SIZE 0x0e8c
+#define GT64260_PCI_1_SLAVE_DAC_CS_0_SIZE 0x0e90
+#define GT64260_PCI_1_SLAVE_DAC_CS_1_SIZE 0x0e94
+#define GT64260_PCI_1_SLAVE_DAC_CS_2_SIZE 0x0e98
+#define GT64260_PCI_1_SLAVE_DAC_CS_3_SIZE 0x0e9c
+#define GT64260_PCI_1_SLAVE_DAC_BOOT_SIZE 0x0ea0
+#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_SIZE 0x0ea4
+#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_SIZE 0x0ea8
+#define GT64260_PCI_1_SLAVE_DAC_CPU_SIZE 0x0eac
+
+#define GT64260_PCI_1_SLAVE_EXP_ROM_SIZE 0x0dac
+
+#define GT64260_PCI_1_SLAVE_BAR_REG_ENABLES 0x0cbc
+#define GT64260_PCI_1_SLAVE_SCS_0_REMAP 0x0cc8
+#define GT64260_PCI_1_SLAVE_SCS_1_REMAP 0x0dc8
+#define GT64260_PCI_1_SLAVE_SCS_2_REMAP 0x0ccc
+#define GT64260_PCI_1_SLAVE_SCS_3_REMAP 0x0dcc
+#define GT64260_PCI_1_SLAVE_CS_0_REMAP 0x0cd0
+#define GT64260_PCI_1_SLAVE_CS_1_REMAP 0x0dd0
+#define GT64260_PCI_1_SLAVE_CS_2_REMAP 0x0dd8
+#define GT64260_PCI_1_SLAVE_CS_3_REMAP 0x0cd4
+#define GT64260_PCI_1_SLAVE_BOOT_REMAP 0x0dd4
+#define GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_LO 0x0ddc
+#define GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_HI 0x0de0
+#define GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_LO 0x0de4
+#define GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_HI 0x0de8
+#define GT64260_PCI_1_SLAVE_P2P_IO_REMAP 0x0dec
+#define GT64260_PCI_1_SLAVE_CPU_REMAP 0x0df0
+
+#define GT64260_PCI_1_SLAVE_DAC_SCS_0_REMAP 0x0f80
+#define GT64260_PCI_1_SLAVE_DAC_SCS_1_REMAP 0x0f84
+#define GT64260_PCI_1_SLAVE_DAC_SCS_2_REMAP 0x0f88
+#define GT64260_PCI_1_SLAVE_DAC_SCS_3_REMAP 0x0f8c
+#define GT64260_PCI_1_SLAVE_DAC_CS_0_REMAP 0x0f90
+#define GT64260_PCI_1_SLAVE_DAC_CS_1_REMAP 0x0f94
+#define GT64260_PCI_1_SLAVE_DAC_CS_2_REMAP 0x0f98
+#define GT64260_PCI_1_SLAVE_DAC_CS_3_REMAP 0x0f9c
+#define GT64260_PCI_1_SLAVE_DAC_BOOT_REMAP 0x0fa0
+#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_LO 0x0fa4
+#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_HI 0x0fa8
+#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_LO 0x0fac
+#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_HI 0x0fb0
+#define GT64260_PCI_1_SLAVE_DAC_CPU_REMAP 0x0fb4
+
+#define GT64260_PCI_1_SLAVE_EXP_ROM_REMAP 0x0fb8
+#define GT64260_PCI_1_SLAVE_PCI_DECODE_CNTL 0x0dbc
+
+
+/*
+ *****************************************************************************
+ *
+ * I2O Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* FIXME: fill in */
+
+
+
+/*
+ *****************************************************************************
+ *
+ * DMA Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* FIXME: fill in */
+
+
+/*
+ *****************************************************************************
+ *
+ * Timer/Counter Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* FIXME: fill in */
+
+
+/*
+ *****************************************************************************
+ *
+ * Communications Controller (Enet, Serial, etc.) Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_ENET_0_CNTL_LO 0xf200
+#define GT64260_ENET_0_CNTL_HI 0xf204
+#define GT64260_ENET_0_RX_BUF_PCI_ADDR_HI 0xf208
+#define GT64260_ENET_0_TX_BUF_PCI_ADDR_HI 0xf20c
+#define GT64260_ENET_0_RX_DESC_ADDR_HI 0xf210
+#define GT64260_ENET_0_TX_DESC_ADDR_HI 0xf214
+#define GT64260_ENET_0_HASH_TAB_PCI_ADDR_HI 0xf218
+#define GT64260_ENET_1_CNTL_LO 0xf220
+#define GT64260_ENET_1_CNTL_HI 0xf224
+#define GT64260_ENET_1_RX_BUF_PCI_ADDR_HI 0xf228
+#define GT64260_ENET_1_TX_BUF_PCI_ADDR_HI 0xf22c
+#define GT64260_ENET_1_RX_DESC_ADDR_HI 0xf230
+#define GT64260_ENET_1_TX_DESC_ADDR_HI 0xf234
+#define GT64260_ENET_1_HASH_TAB_PCI_ADDR_HI 0xf238
+#define GT64260_ENET_2_CNTL_LO 0xf240
+#define GT64260_ENET_2_CNTL_HI 0xf244
+#define GT64260_ENET_2_RX_BUF_PCI_ADDR_HI 0xf248
+#define GT64260_ENET_2_TX_BUF_PCI_ADDR_HI 0xf24c
+#define GT64260_ENET_2_RX_DESC_ADDR_HI 0xf250
+#define GT64260_ENET_2_TX_DESC_ADDR_HI 0xf254
+#define GT64260_ENET_2_HASH_TAB_PCI_ADDR_HI 0xf258
+
+#define GT64260_MPSC_0_CNTL_LO 0xf280
+#define GT64260_MPSC_0_CNTL_HI 0xf284
+#define GT64260_MPSC_0_RX_BUF_PCI_ADDR_HI 0xf288
+#define GT64260_MPSC_0_TX_BUF_PCI_ADDR_HI 0xf28c
+#define GT64260_MPSC_0_RX_DESC_ADDR_HI 0xf290
+#define GT64260_MPSC_0_TX_DESC_ADDR_HI 0xf294
+#define GT64260_MPSC_1_CNTL_LO 0xf2c0
+#define GT64260_MPSC_1_CNTL_HI 0xf2c4
+#define GT64260_MPSC_1_RX_BUF_PCI_ADDR_HI 0xf2c8
+#define GT64260_MPSC_1_TX_BUF_PCI_ADDR_HI 0xf2cc
+#define GT64260_MPSC_1_RX_DESC_ADDR_HI 0xf2d0
+#define GT64260_MPSC_1_TX_DESC_ADDR_HI 0xf2d4
+
+#define GT64260_SER_INIT_PCI_ADDR_HI 0xf320
+#define GT64260_SER_INIT_LAST_DATA 0xf324
+#define GT64260_SER_INIT_CONTROL 0xf328
+#define GT64260_SER_INIT_STATUS 0xf32c
+
+#define GT64260_COMM_ARBITER_CNTL 0xf300
+#define GT64260_COMM_CONFIG 0xb40c
+#define GT64260_COMM_XBAR_TO 0xf304
+#define GT64260_COMM_INTR_CAUSE 0xf310
+#define GT64260_COMM_INTR_MASK 0xf314
+#define GT64260_COMM_ERR_ADDR 0xf318
+
+
+/*
+ *****************************************************************************
+ *
+ * Fast Ethernet Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_ENET_PHY_ADDR 0x2000
+#define GT64260_ENET_ESMIR 0x2010
+
+#define GT64260_ENET_E0PCR 0x2400
+#define GT64260_ENET_E0PCXR 0x2408
+#define GT64260_ENET_E0PCMR 0x2410
+#define GT64260_ENET_E0PSR 0x2418
+#define GT64260_ENET_E0SPR 0x2420
+#define GT64260_ENET_E0HTPR 0x2428
+#define GT64260_ENET_E0FCSAL 0x2430
+#define GT64260_ENET_E0FCSAH 0x2438
+#define GT64260_ENET_E0SDCR 0x2440
+#define GT64260_ENET_E0SDCMR 0x2448
+#define GT64260_ENET_E0ICR 0x2450
+#define GT64260_ENET_E0IMR 0x2458
+#define GT64260_ENET_E0FRDP0 0x2480
+#define GT64260_ENET_E0FRDP1 0x2484
+#define GT64260_ENET_E0FRDP2 0x2488
+#define GT64260_ENET_E0FRDP3 0x248c
+#define GT64260_ENET_E0CRDP0 0x24a0
+#define GT64260_ENET_E0CRDP1 0x24a4
+#define GT64260_ENET_E0CRDP2 0x24a8
+#define GT64260_ENET_E0CRDP3 0x24ac
+#define GT64260_ENET_E0CTDP0 0x24e0
+#define GT64260_ENET_E0CTDP1 0x24e4
+#define GT64260_ENET_0_DSCP2P0L 0x2460
+#define GT64260_ENET_0_DSCP2P0H 0x2464
+#define GT64260_ENET_0_DSCP2P1L 0x2468
+#define GT64260_ENET_0_DSCP2P1H 0x246c
+#define GT64260_ENET_0_VPT2P 0x2470
+#define GT64260_ENET_0_MIB_CTRS 0x2500
+
+#define GT64260_ENET_E1PCR 0x2800
+#define GT64260_ENET_E1PCXR 0x2808
+#define GT64260_ENET_E1PCMR 0x2810
+#define GT64260_ENET_E1PSR 0x2818
+#define GT64260_ENET_E1SPR 0x2820
+#define GT64260_ENET_E1HTPR 0x2828
+#define GT64260_ENET_E1FCSAL 0x2830
+#define GT64260_ENET_E1FCSAH 0x2838
+#define GT64260_ENET_E1SDCR 0x2840
+#define GT64260_ENET_E1SDCMR 0x2848
+#define GT64260_ENET_E1ICR 0x2850
+#define GT64260_ENET_E1IMR 0x2858
+#define GT64260_ENET_E1FRDP0 0x2880
+#define GT64260_ENET_E1FRDP1 0x2884
+#define GT64260_ENET_E1FRDP2 0x2888
+#define GT64260_ENET_E1FRDP3 0x288c
+#define GT64260_ENET_E1CRDP0 0x28a0
+#define GT64260_ENET_E1CRDP1 0x28a4
+#define GT64260_ENET_E1CRDP2 0x28a8
+#define GT64260_ENET_E1CRDP3 0x28ac
+#define GT64260_ENET_E1CTDP0 0x28e0
+#define GT64260_ENET_E1CTDP1 0x28e4
+#define GT64260_ENET_1_DSCP2P0L 0x2860
+#define GT64260_ENET_1_DSCP2P0H 0x2864
+#define GT64260_ENET_1_DSCP2P1L 0x2868
+#define GT64260_ENET_1_DSCP2P1H 0x286c
+#define GT64260_ENET_1_VPT2P 0x2870
+#define GT64260_ENET_1_MIB_CTRS 0x2900
+
+#define GT64260_ENET_E2PCR 0x2c00
+#define GT64260_ENET_E2PCXR 0x2c08
+#define GT64260_ENET_E2PCMR 0x2c10
+#define GT64260_ENET_E2PSR 0x2c18
+#define GT64260_ENET_E2SPR 0x2c20
+#define GT64260_ENET_E2HTPR 0x2c28
+#define GT64260_ENET_E2FCSAL 0x2c30
+#define GT64260_ENET_E2FCSAH 0x2c38
+#define GT64260_ENET_E2SDCR 0x2c40
+#define GT64260_ENET_E2SDCMR 0x2c48
+#define GT64260_ENET_E2ICR 0x2c50
+#define GT64260_ENET_E2IMR 0x2c58
+#define GT64260_ENET_E2FRDP0 0x2c80
+#define GT64260_ENET_E2FRDP1 0x2c84
+#define GT64260_ENET_E2FRDP2 0x2c88
+#define GT64260_ENET_E2FRDP3 0x2c8c
+#define GT64260_ENET_E2CRDP0 0x2ca0
+#define GT64260_ENET_E2CRDP1 0x2ca4
+#define GT64260_ENET_E2CRDP2 0x2ca8
+#define GT64260_ENET_E2CRDP3 0x2cac
+#define GT64260_ENET_E2CTDP0 0x2ce0
+#define GT64260_ENET_E2CTDP1 0x2ce4
+#define GT64260_ENET_2_DSCP2P0L 0x2c60
+#define GT64260_ENET_2_DSCP2P0H 0x2c64
+#define GT64260_ENET_2_DSCP2P1L 0x2c68
+#define GT64260_ENET_2_DSCP2P1H 0x2c6c
+#define GT64260_ENET_2_VPT2P 0x2c70
+#define GT64260_ENET_2_MIB_CTRS 0x2d00
+
+
+/*
+ *****************************************************************************
+ *
+ * Multi-Protocol Serial Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* Signal Routing */
+#define GT64260_MPSC_MRR 0xb400
+#define GT64260_MPSC_RCRR 0xb404
+#define GT64260_MPSC_TCRR 0xb408
+
+/* Main Configuratino Registers */
+#define GT64260_MPSC_0_MMCRL 0x8000
+#define GT64260_MPSC_0_MMCRH 0x8004
+#define GT64260_MPSC_0_MPCR 0x8008
+#define GT64260_MPSC_0_CHR_1 0x800c
+#define GT64260_MPSC_0_CHR_2 0x8010
+#define GT64260_MPSC_0_CHR_3 0x8014
+#define GT64260_MPSC_0_CHR_4 0x8018
+#define GT64260_MPSC_0_CHR_5 0x801c
+#define GT64260_MPSC_0_CHR_6 0x8020
+#define GT64260_MPSC_0_CHR_7 0x8024
+#define GT64260_MPSC_0_CHR_8 0x8028
+#define GT64260_MPSC_0_CHR_9 0x802c
+#define GT64260_MPSC_0_CHR_10 0x8030
+#define GT64260_MPSC_0_CHR_11 0x8034
+
+#define GT64260_MPSC_1_MMCRL 0x9000
+#define GT64260_MPSC_1_MMCRH 0x9004
+#define GT64260_MPSC_1_MPCR 0x9008
+#define GT64260_MPSC_1_CHR_1 0x900c
+#define GT64260_MPSC_1_CHR_2 0x9010
+#define GT64260_MPSC_1_CHR_3 0x9014
+#define GT64260_MPSC_1_CHR_4 0x9018
+#define GT64260_MPSC_1_CHR_5 0x901c
+#define GT64260_MPSC_1_CHR_6 0x9020
+#define GT64260_MPSC_1_CHR_7 0x9024
+#define GT64260_MPSC_1_CHR_8 0x9028
+#define GT64260_MPSC_1_CHR_9 0x902c
+#define GT64260_MPSC_1_CHR_10 0x9030
+#define GT64260_MPSC_1_CHR_11 0x9034
+
+#define GT64260_MPSC_0_INTR_CAUSE 0xb804
+#define GT64260_MPSC_0_INTR_MASK 0xb884
+#define GT64260_MPSC_1_INTR_CAUSE 0xb80c
+#define GT64260_MPSC_1_INTR_MASK 0xb88c
+
+#define GT64260_MPSC_UART_CR_TEV (1<<1)
+#define GT64260_MPSC_UART_CR_TA (1<<7)
+#define GT64260_MPSC_UART_CR_TTCS (1<<9)
+#define GT64260_MPSC_UART_CR_REV (1<<17)
+#define GT64260_MPSC_UART_CR_RA (1<<23)
+#define GT64260_MPSC_UART_CR_CRD (1<<25)
+#define GT64260_MPSC_UART_CR_EH (1<<31)
+
+#define GT64260_MPSC_UART_ESR_CTS (1<<0)
+#define GT64260_MPSC_UART_ESR_CD (1<<1)
+#define GT64260_MPSC_UART_ESR_TIDLE (1<<3)
+#define GT64260_MPSC_UART_ESR_RHS (1<<5)
+#define GT64260_MPSC_UART_ESR_RLS (1<<7)
+#define GT64260_MPSC_UART_ESR_RLIDL (1<<11)
+
+
+/*
+ *****************************************************************************
+ *
+ * Serial DMA Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_SDMA_0_SDC 0x4000
+#define GT64260_SDMA_0_SDCM 0x4008
+#define GT64260_SDMA_0_RX_DESC 0x4800
+#define GT64260_SDMA_0_RX_BUF_PTR 0x4808
+#define GT64260_SDMA_0_SCRDP 0x4810
+#define GT64260_SDMA_0_TX_DESC 0x4c00
+#define GT64260_SDMA_0_SCTDP 0x4c10
+#define GT64260_SDMA_0_SFTDP 0x4c14
+
+#define GT64260_SDMA_1_SDC 0x6000
+#define GT64260_SDMA_1_SDCM 0x6008
+#define GT64260_SDMA_1_RX_DESC 0x6800
+#define GT64260_SDMA_1_RX_BUF_PTR 0x6808
+#define GT64260_SDMA_1_SCRDP 0x6810
+#define GT64260_SDMA_1_TX_DESC 0x6c00
+#define GT64260_SDMA_1_SCTDP 0x6c10
+#define GT64260_SDMA_1_SFTDP 0x6c14
+
+#define GT64260_SDMA_INTR_CAUSE 0xb800
+#define GT64260_SDMA_INTR_MASK 0xb880
+
+#define GT64260_SDMA_DESC_CMDSTAT_PE (1<<0)
+#define GT64260_SDMA_DESC_CMDSTAT_CDL (1<<1)
+#define GT64260_SDMA_DESC_CMDSTAT_FR (1<<3)
+#define GT64260_SDMA_DESC_CMDSTAT_OR (1<<6)
+#define GT64260_SDMA_DESC_CMDSTAT_BR (1<<9)
+#define GT64260_SDMA_DESC_CMDSTAT_MI (1<<10)
+#define GT64260_SDMA_DESC_CMDSTAT_A (1<<11)
+#define GT64260_SDMA_DESC_CMDSTAT_AM (1<<12)
+#define GT64260_SDMA_DESC_CMDSTAT_CT (1<<13)
+#define GT64260_SDMA_DESC_CMDSTAT_C (1<<14)
+#define GT64260_SDMA_DESC_CMDSTAT_ES (1<<15)
+#define GT64260_SDMA_DESC_CMDSTAT_L (1<<16)
+#define GT64260_SDMA_DESC_CMDSTAT_F (1<<17)
+#define GT64260_SDMA_DESC_CMDSTAT_P (1<<18)
+#define GT64260_SDMA_DESC_CMDSTAT_EI (1<<23)
+#define GT64260_SDMA_DESC_CMDSTAT_O (1<<31)
+
+#define GT64260_SDMA_SDC_RFT (1<<0)
+#define GT64260_SDMA_SDC_SFM (1<<1)
+#define GT64260_SDMA_SDC_BLMR (1<<6)
+#define GT64260_SDMA_SDC_BLMT (1<<7)
+#define GT64260_SDMA_SDC_POVR (1<<8)
+#define GT64260_SDMA_SDC_RIFB (1<<9)
+
+#define GT64260_SDMA_SDCM_ERD (1<<7)
+#define GT64260_SDMA_SDCM_AR (1<<15)
+#define GT64260_SDMA_SDCM_STD (1<<16)
+#define GT64260_SDMA_SDCM_TXD (1<<23)
+#define GT64260_SDMA_SDCM_AT (1<<31)
+
+#define GT64260_SDMA_0_CAUSE_RXBUF (1<<0)
+#define GT64260_SDMA_0_CAUSE_RXERR (1<<1)
+#define GT64260_SDMA_0_CAUSE_TXBUF (1<<2)
+#define GT64260_SDMA_0_CAUSE_TXEND (1<<3)
+#define GT64260_SDMA_1_CAUSE_RXBUF (1<<8)
+#define GT64260_SDMA_1_CAUSE_RXERR (1<<9)
+#define GT64260_SDMA_1_CAUSE_TXBUF (1<<10)
+#define GT64260_SDMA_1_CAUSE_TXEND (1<<11)
+
+
+/*
+ *****************************************************************************
+ *
+ * Baud Rate Generator Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_BRG_0_BCR 0xb200
+#define GT64260_BRG_0_BTR 0xb204
+#define GT64260_BRG_1_BCR 0xb208
+#define GT64260_BRG_1_BTR 0xb20c
+#define GT64260_BRG_2_BCR 0xb210
+#define GT64260_BRG_2_BTR 0xb214
+
+#define GT64260_BRG_INTR_CAUSE 0xb834
+#define GT64260_BRG_INTR_MASK 0xb8b4
+
+
+/*
+ *****************************************************************************
+ *
+ * Watchdog Timer Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_WDT_WDC 0xb410
+#define GT64260_WDT_WDV 0xb414
+
+
+/*
+ *****************************************************************************
+ *
+ * General Purpose Pins Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_GPP_IO_CNTL 0xf100
+#define GT64260_GPP_LEVEL_CNTL 0xf110
+#define GT64260_GPP_VALUE 0xf104
+#define GT64260_GPP_INTR_CAUSE 0xf108
+#define GT64260_GPP_INTR_MASK 0xf10c
+
+
+/*
+ *****************************************************************************
+ *
+ * Multi-Purpose Pins Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_MPP_CNTL_0 0xf000
+#define GT64260_MPP_CNTL_1 0xf004
+#define GT64260_MPP_CNTL_2 0xf008
+#define GT64260_MPP_CNTL_3 0xf00c
+#define GT64260_MPP_SERIAL_PORTS_MULTIPLEX 0xf010
+
+
+/*
+ *****************************************************************************
+ *
+ * I2C Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* FIXME: fill in */
+
+
+/*
+ *****************************************************************************
+ *
+ * Interrupt Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_IC_MAIN_CAUSE_LO 0x0c18
+#define GT64260_IC_MAIN_CAUSE_HI 0x0c68
+#define GT64260_IC_CPU_INTR_MASK_LO 0x0c1c
+#define GT64260_IC_CPU_INTR_MASK_HI 0x0c6c
+#define GT64260_IC_CPU_SELECT_CAUSE 0x0c70
+#define GT64260_IC_PCI_0_INTR_MASK_LO 0x0c24
+#define GT64260_IC_PCI_0_INTR_MASK_HI 0x0c64
+#define GT64260_IC_PCI_0_SELECT_CAUSE 0x0c74
+#define GT64260_IC_PCI_1_INTR_MASK_LO 0x0ca4
+#define GT64260_IC_PCI_1_INTR_MASK_HI 0x0ce4
+#define GT64260_IC_PCI_1_SELECT_CAUSE 0x0cf4
+#define GT64260_IC_CPU_INT_0_MASK 0x0e60
+#define GT64260_IC_CPU_INT_1_MASK 0x0e64
+#define GT64260_IC_CPU_INT_2_MASK 0x0e68
+#define GT64260_IC_CPU_INT_3_MASK 0x0e6c
+
+
+#endif /* __ASMPPC_GT64260_DEFS_H */
diff --git a/include/asm-ppc/hardirq.h b/include/asm-ppc/hardirq.h
new file mode 100644
index 0000000..94f1411
--- /dev/null
+++ b/include/asm-ppc/hardirq.h
@@ -0,0 +1,31 @@
+#ifdef __KERNEL__
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/cache.h>
+#include <linux/smp_lock.h>
+#include <asm/irq.h>
+
+/* The __last_jiffy_stamp field is needed to ensure that no decrementer
+ * interrupt is lost on SMP machines. Since on most CPUs it is in the same
+ * cache line as local_irq_count, it is cheap to access and is also used on UP
+ * for uniformity.
+ */
+typedef struct {
+ unsigned long __softirq_pending; /* set_bit is used on this */
+ unsigned int __last_jiffy_stamp;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
+
+static inline void ack_bad_irq(int irq)
+{
+ printk(KERN_CRIT "illegal vector %d received!\n", irq);
+ BUG();
+}
+
+#endif /* __ASM_HARDIRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/harrier.h b/include/asm-ppc/harrier.h
new file mode 100644
index 0000000..36c73ab
--- /dev/null
+++ b/include/asm-ppc/harrier.h
@@ -0,0 +1,45 @@
+/*
+ * arch/ppc/kernel/harrier.h
+ *
+ * Definitions for Motorola MCG Harrier North Bridge & Memory controller
+ *
+ * Author: Dale Farnsworth
+ * dale.farnsworth@mvista.com
+ *
+ * Modified by: Randy Vinson
+ * rvinson@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASMPPC_HARRIER_H
+#define __ASMPPC_HARRIER_H
+
+#include <linux/types.h>
+#include <asm/pci-bridge.h>
+
+struct pci_controller;
+int harrier_init(struct pci_controller *hose,
+ uint ppc_reg_base,
+ ulong processor_pci_mem_start,
+ ulong processor_pci_mem_end,
+ ulong processor_pci_io_start,
+ ulong processor_pci_io_end,
+ ulong processor_mpic_base);
+
+unsigned long harrier_get_mem_size(uint smc_base);
+
+int harrier_mpic_init(unsigned int pci_mem_offset);
+
+void harrier_setup_nonmonarch(uint ppc_reg_base,
+ uint in0_size);
+void harrier_release_eready(uint ppc_reg_base);
+
+void harrier_wait_eready(uint ppc_reg_base);
+
+#endif /* __ASMPPC_HARRIER_H */
diff --git a/include/asm-ppc/hawk.h b/include/asm-ppc/hawk.h
new file mode 100644
index 0000000..f347007
--- /dev/null
+++ b/include/asm-ppc/hawk.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-ppc/hawk.h
+ *
+ * Support functions for MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
+ *
+ * Author: Mark A. Greer
+ * mgreer@mvista.com
+ *
+ * Modified by Randy Vinson (rvinson@mvista.com)
+ *
+ * 2001,2004 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASMPPC_HAWK_H
+#define __ASMPPC_HAWK_H
+
+#include <asm/pci-bridge.h>
+#include <asm/hawk_defs.h>
+
+extern int hawk_init(struct pci_controller *hose,
+ unsigned int ppc_reg_base, unsigned long processor_pci_mem_start,
+ unsigned long processor_pci_mem_end,
+ unsigned long processor_pci_io_start,
+ unsigned long processor_pci_io_end,
+ unsigned long processor_mpic_base);
+extern unsigned long hawk_get_mem_size(unsigned int smc_base);
+extern int hawk_mpic_init(unsigned int pci_mem_offset);
+
+#endif /* __ASMPPC_HAWK_H */
diff --git a/include/asm-ppc/hawk_defs.h b/include/asm-ppc/hawk_defs.h
new file mode 100644
index 0000000..6d1d2ba
--- /dev/null
+++ b/include/asm-ppc/hawk_defs.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-ppc/hawk_defs.h
+ *
+ * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
+ *
+ * Author: Mark A. Greer
+ * mgreer@mvista.com
+ *
+ * Modified by Randy Vinson (rvinson@mvista.com)
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASMPPC_HAWK_DEFS_H
+#define __ASMPPC_HAWK_DEFS_H
+
+#include <asm/pci-bridge.h>
+
+/*
+ * The Falcon/Raven and HAWK have 4 sets of registers:
+ * 1) PPC Registers which define the mappings from PPC bus to PCI bus,
+ * etc.
+ * 2) PCI Registers which define the mappings from PCI bus to PPC bus and the
+ * MPIC base address.
+ * 3) MPIC registers
+ * 4) System Memory Controller (SMC) registers.
+ */
+
+#define HAWK_PCI_CONFIG_ADDR_OFF 0x00000cf8
+#define HAWK_PCI_CONFIG_DATA_OFF 0x00000cfc
+
+#define HAWK_MPIC_SIZE 0x00040000U
+#define HAWK_SMC_SIZE 0x00001000U
+
+/*
+ * Define PPC register offsets.
+ */
+#define HAWK_PPC_XSADD0_OFF 0x40
+#define HAWK_PPC_XSOFF0_OFF 0x44
+#define HAWK_PPC_XSADD1_OFF 0x48
+#define HAWK_PPC_XSOFF1_OFF 0x4c
+#define HAWK_PPC_XSADD2_OFF 0x50
+#define HAWK_PPC_XSOFF2_OFF 0x54
+#define HAWK_PPC_XSADD3_OFF 0x58
+#define HAWK_PPC_XSOFF3_OFF 0x5c
+
+/*
+ * Define PCI register offsets.
+ */
+#define HAWK_PCI_PSADD0_OFF 0x80
+#define HAWK_PCI_PSOFF0_OFF 0x84
+#define HAWK_PCI_PSADD1_OFF 0x88
+#define HAWK_PCI_PSOFF1_OFF 0x8c
+#define HAWK_PCI_PSADD2_OFF 0x90
+#define HAWK_PCI_PSOFF2_OFF 0x94
+#define HAWK_PCI_PSADD3_OFF 0x98
+#define HAWK_PCI_PSOFF3_OFF 0x9c
+
+/*
+ * Define the System Memory Controller (SMC) register offsets.
+ */
+#define HAWK_SMC_RAM_A_SIZE_REG_OFF 0x10
+#define HAWK_SMC_RAM_B_SIZE_REG_OFF 0x11
+#define HAWK_SMC_RAM_C_SIZE_REG_OFF 0x12
+#define HAWK_SMC_RAM_D_SIZE_REG_OFF 0x13
+#define HAWK_SMC_RAM_E_SIZE_REG_OFF 0xc0 /* HAWK Only */
+#define HAWK_SMC_RAM_F_SIZE_REG_OFF 0xc1 /* HAWK Only */
+#define HAWK_SMC_RAM_G_SIZE_REG_OFF 0xc2 /* HAWK Only */
+#define HAWK_SMC_RAM_H_SIZE_REG_OFF 0xc3 /* HAWK Only */
+
+#define FALCON_SMC_REG_COUNT 4
+#define HAWK_SMC_REG_COUNT 8
+#endif /* __ASMPPC_HAWK_DEFS_H */
diff --git a/include/asm-ppc/hdreg.h b/include/asm-ppc/hdreg.h
new file mode 100644
index 0000000..7f7fd1a
--- /dev/null
+++ b/include/asm-ppc/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-ppc/heathrow.h b/include/asm-ppc/heathrow.h
new file mode 100644
index 0000000..22ac179
--- /dev/null
+++ b/include/asm-ppc/heathrow.h
@@ -0,0 +1,62 @@
+/*
+ * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
+ *
+ * Grabbed from Open Firmware definitions on a PowerBook G3 Series
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+
+/* Front light color on Yikes/B&W G3. 32 bits */
+#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */
+
+/* Brightness/contrast (gossamer iMac ?). 8 bits */
+#define HEATHROW_BRIGHTNESS_CNTL 0x32
+#define HEATHROW_CONTRAST_CNTL 0x33
+
+/* offset from ohare base for feature control register */
+#define HEATHROW_MBCR 0x34 /* Media bay control */
+#define HEATHROW_FCR 0x38 /* Feature control */
+#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */
+
+/*
+ * Bits in feature control register.
+ * Bits postfixed with a _N are in inverse logic
+ */
+#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */
+#define HRW_BAY_POWER_N 0x00000002
+#define HRW_BAY_PCI_ENABLE 0x00000004
+#define HRW_BAY_IDE_ENABLE 0x00000008
+#define HRW_BAY_FLOPPY_ENABLE 0x00000010
+#define HRW_IDE0_ENABLE 0x00000020
+#define HRW_IDE0_RESET_N 0x00000040
+#define HRW_BAY_DEV_MASK 0x0000001c
+#define HRW_BAY_RESET_N 0x00000080
+#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */
+#define HRW_SCC_ENABLE 0x00000200
+#define HRW_MESH_ENABLE 0x00000400
+#define HRW_SWIM_ENABLE 0x00000800
+#define HRW_SOUND_POWER_N 0x00001000
+#define HRW_SOUND_CLK_ENABLE 0x00002000
+#define HRW_SCCA_IO 0x00004000
+#define HRW_SCCB_IO 0x00008000
+#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */
+#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */
+#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */
+#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */
+#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */
+#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */
+#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */
+#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */
+#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */
+#define HRW_RESET_SCC 0x02000000
+#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */
+#define HRW_USE_MFDC 0x08000000 /* ??? (0) */
+#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */
+#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */
+
+/* We OR those features at boot on desktop G3s */
+#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
+
+/* Looks like Heathrow has some sort of GPIOs as well... */
+#define HRW_GPIO_MODEM_RESET 0x6d
+
diff --git a/include/asm-ppc/highmem.h b/include/asm-ppc/highmem.h
new file mode 100644
index 0000000..1d2c4ef
--- /dev/null
+++ b/include/asm-ppc/highmem.h
@@ -0,0 +1,137 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+
+/* undef for production */
+#define HIGHMEM_DEBUG 1
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE CONFIG_HIGHMEM_START
+#define LAST_PKMAP (1 << PTE_SHIFT)
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define KMAP_FIX_BEGIN (PKMAP_BASE + 0x00400000UL)
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+ might_sleep();
+ if (!PageHighMem(page))
+ return page_address(page);
+ return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+ BUG_ON(in_interrupt());
+ if (!PageHighMem(page))
+ return;
+ kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+ inc_preempt_count();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE;
+#ifdef HIGHMEM_DEBUG
+ BUG_ON(!pte_none(*(kmap_pte+idx)));
+#endif
+ set_pte_at(&init_mm, vaddr, kmap_pte+idx, mk_pte(page, kmap_prot));
+ flush_tlb_page(NULL, vaddr);
+
+ return (void*) vaddr;
+}
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef HIGHMEM_DEBUG
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ unsigned int idx = type + KM_TYPE_NR*smp_processor_id();
+
+ if (vaddr < KMAP_FIX_BEGIN) { // FIXME
+ dec_preempt_count();
+ preempt_check_resched();
+ return;
+ }
+
+ BUG_ON(vaddr != KMAP_FIX_BEGIN + idx * PAGE_SIZE);
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(&init_mm, vaddr, kmap_pte+idx);
+ flush_tlb_page(NULL, vaddr);
+#endif
+ dec_preempt_count();
+ preempt_check_resched();
+}
+
+static inline struct page *kmap_atomic_to_page(void *ptr)
+{
+ unsigned long idx, vaddr = (unsigned long) ptr;
+
+ if (vaddr < KMAP_FIX_BEGIN)
+ return virt_to_page(ptr);
+
+ idx = (vaddr - KMAP_FIX_BEGIN) >> PAGE_SHIFT;
+ return pte_page(kmap_pte[idx]);
+}
+
+#define flush_cache_kmaps() flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-ppc/hw_irq.h b/include/asm-ppc/hw_irq.h
new file mode 100644
index 0000000..47dc799
--- /dev/null
+++ b/include/asm-ppc/hw_irq.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_HW_IRQ_H
+#define _PPC_HW_IRQ_H
+
+#include <asm/ptrace.h>
+#include <asm/reg.h>
+
+extern void timer_interrupt(struct pt_regs *);
+
+#define INLINE_IRQS
+
+#define irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+
+#ifdef INLINE_IRQS
+
+static inline void local_irq_disable(void)
+{
+ unsigned long msr;
+ msr = mfmsr();
+ mtmsr(msr & ~MSR_EE);
+ __asm__ __volatile__("": : :"memory");
+}
+
+static inline void local_irq_enable(void)
+{
+ unsigned long msr;
+ __asm__ __volatile__("": : :"memory");
+ msr = mfmsr();
+ mtmsr(msr | MSR_EE);
+}
+
+static inline void local_irq_save_ptr(unsigned long *flags)
+{
+ unsigned long msr;
+ msr = mfmsr();
+ *flags = msr;
+ mtmsr(msr & ~MSR_EE);
+ __asm__ __volatile__("": : :"memory");
+}
+
+#define local_save_flags(flags) ((flags) = mfmsr())
+#define local_irq_save(flags) local_irq_save_ptr(&flags)
+#define local_irq_restore(flags) mtmsr(flags)
+
+#else
+
+extern void local_irq_enable(void);
+extern void local_irq_disable(void);
+extern void local_irq_restore(unsigned long);
+extern void local_save_flags_ptr(unsigned long *);
+
+#define local_save_flags(flags) local_save_flags_ptr(&flags)
+#define local_irq_save(flags) ({local_save_flags(flags);local_irq_disable();})
+
+#endif
+
+extern void do_lost_interrupts(unsigned long);
+
+#define mask_irq(irq) ({if (irq_desc[irq].handler && irq_desc[irq].handler->disable) irq_desc[irq].handler->disable(irq);})
+#define unmask_irq(irq) ({if (irq_desc[irq].handler && irq_desc[irq].handler->enable) irq_desc[irq].handler->enable(irq);})
+#define ack_irq(irq) ({if (irq_desc[irq].handler && irq_desc[irq].handler->ack) irq_desc[irq].handler->ack(irq);})
+
+/* Should we handle this via lost interrupts and IPIs or should we don't care like
+ * we do now ? --BenH.
+ */
+struct hw_interrupt_type;
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {}
+
+
+#endif /* _PPC_HW_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/hydra.h b/include/asm-ppc/hydra.h
new file mode 100644
index 0000000..1134431
--- /dev/null
+++ b/include/asm-ppc/hydra.h
@@ -0,0 +1,102 @@
+/*
+ * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
+ *
+ * Copyright (C) 1997 Geert Uytterhoeven
+ *
+ * This file is based on the following documentation:
+ *
+ * Macintosh Technology in the Common Hardware Reference Platform
+ * Apple Computer, Inc.
+ *
+ * © Copyright 1995 Apple Computer, Inc. All rights reserved.
+ *
+ * It's available online from http://chrp.apple.com/MacTech.pdf.
+ * You can obtain paper copies of this book from computer bookstores or by
+ * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
+ * Francisco, CA 94104. Reference ISBN 1-55860-393-X.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASMPPC_HYDRA_H
+#define _ASMPPC_HYDRA_H
+
+#ifdef __KERNEL__
+
+struct Hydra {
+ /* DBDMA Controller Register Space */
+ char Pad1[0x30];
+ u_int CachePD;
+ u_int IDs;
+ u_int Feature_Control;
+ char Pad2[0x7fc4];
+ /* DBDMA Channel Register Space */
+ char SCSI_DMA[0x100];
+ char Pad3[0x300];
+ char SCCA_Tx_DMA[0x100];
+ char SCCA_Rx_DMA[0x100];
+ char SCCB_Tx_DMA[0x100];
+ char SCCB_Rx_DMA[0x100];
+ char Pad4[0x7800];
+ /* Device Register Space */
+ char SCSI[0x1000];
+ char ADB[0x1000];
+ char SCC_Legacy[0x1000];
+ char SCC[0x1000];
+ char Pad9[0x2000];
+ char VIA[0x2000];
+ char Pad10[0x28000];
+ char OpenPIC[0x40000];
+};
+
+extern volatile struct Hydra *Hydra;
+
+
+ /*
+ * Feature Control Register
+ */
+
+#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */
+#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */
+#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */
+#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */
+#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */
+#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */
+#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */
+#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */
+#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */
+
+
+ /*
+ * OpenPIC Interrupt Sources
+ */
+
+#define HYDRA_INT_SIO 0
+#define HYDRA_INT_SCSI_DMA 1
+#define HYDRA_INT_SCCA_TX_DMA 2
+#define HYDRA_INT_SCCA_RX_DMA 3
+#define HYDRA_INT_SCCB_TX_DMA 4
+#define HYDRA_INT_SCCB_RX_DMA 5
+#define HYDRA_INT_SCSI 6
+#define HYDRA_INT_SCCA 7
+#define HYDRA_INT_SCCB 8
+#define HYDRA_INT_VIA 9
+#define HYDRA_INT_ADB 10
+#define HYDRA_INT_ADB_NMI 11
+#define HYDRA_INT_EXT1 12 /* PCI IRQW */
+#define HYDRA_INT_EXT2 13 /* PCI IRQX */
+#define HYDRA_INT_EXT3 14 /* PCI IRQY */
+#define HYDRA_INT_EXT4 15 /* PCI IRQZ */
+#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */
+#define HYDRA_INT_EXT6 17 /* IDE Secondary */
+#define HYDRA_INT_EXT7 18 /* Power Off Request */
+#define HYDRA_INT_SPARE 19
+
+extern int hydra_init(void);
+extern void macio_adb_init(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASMPPC_HYDRA_H */
diff --git a/include/asm-ppc/i8259.h b/include/asm-ppc/i8259.h
new file mode 100644
index 0000000..091b712
--- /dev/null
+++ b/include/asm-ppc/i8259.h
@@ -0,0 +1,11 @@
+#ifndef _PPC_KERNEL_i8259_H
+#define _PPC_KERNEL_i8259_H
+
+#include <linux/irq.h>
+
+extern struct hw_interrupt_type i8259_pic;
+
+extern void i8259_init(long intack_addr);
+extern int i8259_irq(struct pt_regs *regs);
+
+#endif /* _PPC_KERNEL_i8259_H */
diff --git a/include/asm-ppc/ibm403.h b/include/asm-ppc/ibm403.h
new file mode 100644
index 0000000..bf6efa0
--- /dev/null
+++ b/include/asm-ppc/ibm403.h
@@ -0,0 +1,479 @@
+/*
+ * Authors: Armin Kuster <akuster@mvista.com> and Tom Rini <trini@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM403_H__
+#define __ASM_IBM403_H__
+
+#include <linux/config.h>
+
+#if defined(CONFIG_403GCX)
+
+#define DCRN_BE_BASE 0x090
+#define DCRN_DMA0_BASE 0x0C0
+#define DCRN_DMA1_BASE 0x0C8
+#define DCRN_DMA2_BASE 0x0D0
+#define DCRN_DMA3_BASE 0x0D8
+#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */
+#define DCRN_DMASR_BASE 0x0E0
+
+#define DCRN_EXIER_BASE 0x042
+#define DCRN_EXISR_BASE 0x040
+#define DCRN_IOCR_BASE 0x0A0
+
+
+/* ------------------------------------------------------------------------- */
+#endif
+
+
+
+#ifdef DCRN_BE_BASE
+#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
+#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register*/
+#endif
+/* DCRN_BESR */
+#define BESR_DSES 0x80000000 /* Data-Side Error Status */
+#define BESR_DMES 0x40000000 /* DMA Error Status */
+#define BESR_RWS 0x20000000 /* Read/Write Status */
+#define BESR_ETMASK 0x1C000000 /* Error Type */
+#define ET_PROT 0
+#define ET_PARITY 1
+#define ET_NCFG 2
+#define ET_BUSERR 4
+#define ET_BUSTO 6
+
+#ifdef DCRN_CHCR_BASE
+#define DCRN_CHCR0 (DCRN_CHCR_BASE + 0x0) /* Chip Control Register 1 */
+#define DCRN_CHCR1 (DCRN_CHCR_BASE + 0x1) /* Chip Control Register 2 */
+#endif
+#define CHR1_CETE 0x00800000 /* CPU external timer enable */
+#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
+
+#ifdef DCRN_CHPSR_BASE
+#define DCRN_CHPSR (DCRN_CHPSR_BASE + 0x0) /* Chip Pin Strapping */
+#endif
+
+#ifdef DCRN_CIC_BASE
+#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */
+#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */
+#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */
+#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */
+#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */
+#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */
+#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */
+#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */
+#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */
+#endif
+
+#ifdef DCRN_CPMFR_BASE
+#define DCRN_CPMFR (DCRN_CPMFR_BASE + 0x0) /* CPM Force */
+#endif
+
+#ifndef CPM_AUD
+#define CPM_AUD 0x00000000
+#endif
+#ifndef CPM_BRG
+#define CPM_BRG 0x00000000
+#endif
+#ifndef CPM_CBS
+#define CPM_CBS 0x00000000
+#endif
+#ifndef CPM_CPU
+#define CPM_CPU 0x00000000
+#endif
+#ifndef CPM_DCP
+#define CPM_DCP 0x00000000
+#endif
+#ifndef CPM_DCRX
+#define CPM_DCRX 0x00000000
+#endif
+#ifndef CPM_DENC
+#define CPM_DENC 0x00000000
+#endif
+#ifndef CPM_DMA
+#define CPM_DMA 0x00000000
+#endif
+#ifndef CPM_DSCR
+#define CPM_DSCR 0x00000000
+#endif
+#ifndef CPM_EBC
+#define CPM_EBC 0x00000000
+#endif
+#ifndef CPM_EBIU
+#define CPM_EBIU 0x00000000
+#endif
+#ifndef CPM_EMAC_MM
+#define CPM_EMAC_MM 0x00000000
+#endif
+#ifndef CPM_EMAC_RM
+#define CPM_EMAC_RM 0x00000000
+#endif
+#ifndef CPM_EMAC_TM
+#define CPM_EMAC_TM 0x00000000
+#endif
+#ifndef CPM_GPIO0
+#define CPM_GPIO0 0x00000000
+#endif
+#ifndef CPM_GPT
+#define CPM_GPT 0x00000000
+#endif
+#ifndef CPM_I1284
+#define CPM_I1284 0x00000000
+#endif
+#ifndef CPM_IIC0
+#define CPM_IIC0 0x00000000
+#endif
+#ifndef CPM_IIC1
+#define CPM_IIC1 0x00000000
+#endif
+#ifndef CPM_MSI
+#define CPM_MSI 0x00000000
+#endif
+#ifndef CPM_PCI
+#define CPM_PCI 0x00000000
+#endif
+#ifndef CPM_PLB
+#define CPM_PLB 0x00000000
+#endif
+#ifndef CPM_SC0
+#define CPM_SC0 0x00000000
+#endif
+#ifndef CPM_SC1
+#define CPM_SC1 0x00000000
+#endif
+#ifndef CPM_SDRAM0
+#define CPM_SDRAM0 0x00000000
+#endif
+#ifndef CPM_SDRAM1
+#define CPM_SDRAM1 0x00000000
+#endif
+#ifndef CPM_TMRCLK
+#define CPM_TMRCLK 0x00000000
+#endif
+#ifndef CPM_UART0
+#define CPM_UART0 0x00000000
+#endif
+#ifndef CPM_UART1
+#define CPM_UART1 0x00000000
+#endif
+#ifndef CPM_UART2
+#define CPM_UART2 0x00000000
+#endif
+#ifndef CPM_UIC
+#define CPM_UIC 0x00000000
+#endif
+#ifndef CPM_VID2
+#define CPM_VID2 0x00000000
+#endif
+#ifndef CPM_XPT27
+#define CPM_XPT27 0x00000000
+#endif
+#ifndef CPM_XPT54
+#define CPM_XPT54 0x00000000
+#endif
+
+#ifdef DCRN_CPMSR_BASE
+#define DCRN_CPMSR (DCRN_CPMSR_BASE + 0x0) /* CPM Status */
+#define DCRN_CPMER (DCRN_CPMSR_BASE + 0x1) /* CPM Enable */
+#endif
+
+#ifdef DCRN_DCP0_BASE
+#define DCRN_DCP0_CFGADDR (DCRN_DCP0_BASE + 0x0) /* Decompression Controller Address */
+#define DCRN_DCP0_CFGDATA (DCRN_DCP0_BASE + 0x1) /* Decompression Controller Data */
+#endif
+
+#ifdef DCRN_DCRX_BASE
+#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */
+#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */
+#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */
+#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */
+#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */
+#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */
+#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */
+#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */
+#endif
+
+#ifdef DCRN_DMA0_BASE
+#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control Register 0 */
+#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count Register 0 */
+#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x2) /* DMA Destination Address Register 0 */
+#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Source Address Register 0 */
+#ifdef DCRNCAP_DMA_CC
+#define DCRN_DMACC0 (DCRN_DMA0_BASE + 0x4) /* DMA Chained Count Register 0 */
+#endif
+
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 0 */
+#endif
+#endif
+
+#ifdef DCRN_DMA1_BASE
+#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) /* DMA Channel Control Register 1 */
+#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count Register 1 */
+#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x2) /* DMA Destination Address Register 1 */
+#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Source Address Register 1 */
+
+#ifdef DCRNCAP_DMA_CC
+#define DCRN_DMACC1 (DCRN_DMA1_BASE + 0x4) /* DMA Chained Count Register 1 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 1 */
+#endif
+#endif
+
+#ifdef DCRN_DMA2_BASE
+#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control Register 2 */
+#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count Register 2 */
+#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x2) /* DMA Destination Address Register 2 */
+#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Source Address Register 2 */
+#ifdef DCRNCAP_DMA_CC
+#define DCRN_DMACC2 (DCRN_DMA2_BASE + 0x4) /* DMA Chained Count Register 2 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 2 */
+#endif
+#endif
+
+#ifdef DCRN_DMA3_BASE
+#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control Register 3 */
+#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count Register 3 */
+#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x2) /* DMA Destination Address Register 3 */
+#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Source Address Register 3 */
+#ifdef DCRNCAP_DMA_CC
+#define DCRN_DMACC3 (DCRN_DMA3_BASE + 0x4) /* DMA Chained Count Register 3 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 3 */
+#endif
+#endif
+
+#ifdef DCRN_DMASR_BASE
+#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
+/* don't know if these two registers always exist if scatter/gather exists */
+#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
+#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
+#endif
+#endif
+
+#ifdef DCRN_EBC_BASE
+#define DCRN_EBCCFGADR (DCRN_EBC_BASE + 0x0) /* Peripheral Controller Address */
+#define DCRN_EBCCFGDATA (DCRN_EBC_BASE + 0x1) /* Peripheral Controller Data */
+#endif
+
+#ifdef DCRN_EXIER_BASE
+#define DCRN_EXIER (DCRN_EXIER_BASE + 0x0) /* External Interrupt Enable Register */
+#endif
+
+#ifdef DCRN_EBIMC_BASE
+#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */
+#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */
+#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */
+#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */
+#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */
+#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */
+#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */
+#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */
+#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10)/* BRC 0 */
+#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11)/* BRC 1 */
+#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12)/* BRC 2 */
+#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13)/* BRC 3 */
+#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14)/* BRC 4 */
+#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15)/* BRC 5 */
+#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16)/* BRC 6 */
+#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17)/* BRC 7 */
+#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20)/* Bus Error Address Register */
+#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21)/* Bus Error Status Register */
+#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A)/* Bus Interfac Unit Ctrl Reg */
+#endif
+
+#ifdef DCRN_EXISR_BASE
+#define DCRN_EXISR (DCRN_EXISR_BASE + 0x0) /* External Interrupt Status Register */
+#endif
+#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
+#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
+#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
+#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
+#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
+#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
+#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
+#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
+#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
+#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
+#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
+#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
+#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
+#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
+
+#ifdef DCRN_IOCR_BASE
+#define DCRN_IOCR (DCRN_IOCR_BASE + 0x0) /* Input/Output Configuration Register */
+#endif
+#define IOCR_E0TE 0x80000000
+#define IOCR_E0LP 0x40000000
+#define IOCR_E1TE 0x20000000
+#define IOCR_E1LP 0x10000000
+#define IOCR_E2TE 0x08000000
+#define IOCR_E2LP 0x04000000
+#define IOCR_E3TE 0x02000000
+#define IOCR_E3LP 0x01000000
+#define IOCR_E4TE 0x00800000
+#define IOCR_E4LP 0x00400000
+#define IOCR_EDT 0x00080000
+#define IOCR_SOR 0x00040000
+#define IOCR_EDO 0x00008000
+#define IOCR_2XC 0x00004000
+#define IOCR_ATC 0x00002000
+#define IOCR_SPD 0x00001000
+#define IOCR_BEM 0x00000800
+#define IOCR_PTD 0x00000400
+#define IOCR_ARE 0x00000080
+#define IOCR_DRC 0x00000020
+#define IOCR_RDM(x) (((x) & 0x3) << 3)
+#define IOCR_TCS 0x00000004
+#define IOCR_SCS 0x00000002
+#define IOCR_SPC 0x00000001
+
+#ifdef DCRN_MAL_BASE
+#define DCRN_MALCR (DCRN_MAL_BASE + 0x0) /* MAL Configuration */
+#define DCRN_MALDBR (DCRN_MAL_BASE + 0x3) /* Debug Register */
+#define DCRN_MALESR (DCRN_MAL_BASE + 0x1) /* Error Status */
+#define DCRN_MALIER (DCRN_MAL_BASE + 0x2) /* Interrupt Enable */
+#define DCRN_MALTXCARR (DCRN_MAL_BASE + 0x5) /* TX Channed Active Reset Register */
+#define DCRN_MALTXCASR (DCRN_MAL_BASE + 0x4) /* TX Channel Active Set Register */
+#define DCRN_MALTXDEIR (DCRN_MAL_BASE + 0x7) /* Tx Descriptor Error Interrupt */
+#define DCRN_MALTXEOBISR (DCRN_MAL_BASE + 0x6) /* Tx End of Buffer Interrupt Status */
+#define DCRN_MALRXCARR (DCRN_MAL_BASE + 0x11) /* RX Channed Active Reset Register */
+#define DCRN_MALRXCASR (DCRN_MAL_BASE + 0x10) /* RX Channel Active Set Register */
+#define DCRN_MALRXDEIR (DCRN_MAL_BASE + 0x13) /* Rx Descriptor Error Interrupt */
+#define DCRN_MALRXEOBISR (DCRN_MAL_BASE + 0x12) /* Rx End of Buffer Interrupt Status */
+#define DCRN_MALRXCTP0R (DCRN_MAL_BASE + 0x40) /* Channel Rx 0 Channel Table Pointer */
+#define DCRN_MALTXCTP0R (DCRN_MAL_BASE + 0x20) /* Channel Tx 0 Channel Table Pointer */
+#define DCRN_MALTXCTP1R (DCRN_MAL_BASE + 0x21) /* Channel Tx 1 Channel Table Pointer */
+#define DCRN_MALRCBS0 (DCRN_MAL_BASE + 0x60) /* Channel Rx 0 Channel Buffer Size */
+#endif
+/* DCRN_MALCR */
+#define MALCR_MMSR 0x80000000/* MAL Software reset */
+#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
+#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
+#define MALCR_PLBP_3 0x00C00000 /* highest */
+#define MALCR_GA 0x00200000 /* Guarded Active Bit */
+#define MALCR_OA 0x00100000 /* Ordered Active Bit */
+#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
+#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
+#define MALCR_PLBLT_2 0x00020000
+#define MALCR_PLBLT_3 0x00010000
+#define MALCR_PLBLT_4 0x00008000
+#define MALCR_PLBLT_DEFAULT 0x00078000 /* JSP: Is this a valid default?? */
+#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
+#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
+#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
+#define MALCR_LEA 0x00000002 /* Locked Error Active */
+#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
+/* DCRN_MALESR */
+#define MALESR_EVB 0x80000000 /* Error Valid Bit */
+#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
+#define MALESR_DE 0x00100000 /* Descriptor Error */
+#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
+#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
+#define MALESR_OSE 0x00020000 /* OPB Slave Error */
+#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
+#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
+#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
+#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
+#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
+#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
+/* DCRN_MALIER */
+#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
+#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
+#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
+#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
+#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
+/* DCRN_MALTXEOBISR */
+#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
+#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
+
+#ifdef DCRN_OCM0_BASE
+#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
+#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
+#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
+#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
+#endif
+
+#ifdef DCRN_PLB0_BASE
+#define DCRN_PLB0_BESR (DCRN_PLB0_BASE + 0x0)
+#define DCRN_PLB0_BEAR (DCRN_PLB0_BASE + 0x2)
+/* doesn't exist on stb03xxx? */
+#define DCRN_PLB0_ACR (DCRN_PLB0_BASE + 0x3)
+#endif
+
+#ifdef DCRN_PLB1_BASE
+#define DCRN_PLB1_BESR (DCRN_PLB1_BASE + 0x0)
+#define DCRN_PLB1_BEAR (DCRN_PLB1_BASE + 0x1)
+/* doesn't exist on stb03xxx? */
+#define DCRN_PLB1_ACR (DCRN_PLB1_BASE + 0x2)
+#endif
+
+#ifdef DCRN_PLLMR_BASE
+#define DCRN_PLLMR (DCRN_PLLMR_BASE + 0x0) /* PL1 Mode */
+#endif
+
+#ifdef DCRN_POB0_BASE
+#define DCRN_POB0_BESR0 (DCRN_POB0_BASE + 0x0)
+#define DCRN_POB0_BEAR (DCRN_POB0_BASE + 0x2)
+#define DCRN_POB0_BESR1 (DCRN_POB0_BASE + 0x4)
+#endif
+
+#ifdef DCRN_SCCR_BASE
+#define DCRN_SCCR (DCRN_SCCR_BASE + 0x0)
+#endif
+
+#ifdef DCRN_SDRAM0_BASE
+#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Mem Ctrlr Address */
+#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Mem Ctrlr Data */
+#endif
+
+#ifdef DCRN_UIC0_BASE
+#define DCRN_UIC0_SR (DCRN_UIC0_BASE + 0x0)
+#define DCRN_UIC0_ER (DCRN_UIC0_BASE + 0x2)
+#define DCRN_UIC0_CR (DCRN_UIC0_BASE + 0x3)
+#define DCRN_UIC0_PR (DCRN_UIC0_BASE + 0x4)
+#define DCRN_UIC0_TR (DCRN_UIC0_BASE + 0x5)
+#define DCRN_UIC0_MSR (DCRN_UIC0_BASE + 0x6)
+#define DCRN_UIC0_VR (DCRN_UIC0_BASE + 0x7)
+#define DCRN_UIC0_VCR (DCRN_UIC0_BASE + 0x8)
+#endif
+
+#ifdef DCRN_UIC1_BASE
+#define DCRN_UIC1_SR (DCRN_UIC1_BASE + 0x0)
+#define DCRN_UIC1_SRS (DCRN_UIC1_BASE + 0x1)
+#define DCRN_UIC1_ER (DCRN_UIC1_BASE + 0x2)
+#define DCRN_UIC1_CR (DCRN_UIC1_BASE + 0x3)
+#define DCRN_UIC1_PR (DCRN_UIC1_BASE + 0x4)
+#define DCRN_UIC1_TR (DCRN_UIC1_BASE + 0x5)
+#define DCRN_UIC1_MSR (DCRN_UIC1_BASE + 0x6)
+#define DCRN_UIC1_VR (DCRN_UIC1_BASE + 0x7)
+#define DCRN_UIC1_VCR (DCRN_UIC1_BASE + 0x8)
+#endif
+
+#ifdef DCRN_SDRAM0_BASE
+#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Memory Controller Address */
+#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Memory Controller Data */
+#endif
+
+#ifdef DCRN_OCM0_BASE
+#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
+#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
+#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
+#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
+#endif
+
+#endif /* __ASM_IBM403_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm405.h b/include/asm-ppc/ibm405.h
new file mode 100644
index 0000000..4e5be9e
--- /dev/null
+++ b/include/asm-ppc/ibm405.h
@@ -0,0 +1,299 @@
+/*
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM405_H__
+#define __ASM_IBM405_H__
+
+#ifdef DCRN_BE_BASE
+#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
+#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */
+#endif
+/* DCRN_BESR */
+#define BESR_DSES 0x80000000 /* Data-Side Error Status */
+#define BESR_DMES 0x40000000 /* DMA Error Status */
+#define BESR_RWS 0x20000000 /* Read/Write Status */
+#define BESR_ETMASK 0x1C000000 /* Error Type */
+#define ET_PROT 0
+#define ET_PARITY 1
+#define ET_NCFG 2
+#define ET_BUSERR 4
+#define ET_BUSTO 6
+
+/* Clock and power management shifts for emacs */
+#define IBM_CPM_EMMII 0 /* Shift value for MII */
+#define IBM_CPM_EMRX 1 /* Shift value for recv */
+#define IBM_CPM_EMTX 2 /* Shift value for MAC */
+
+#ifdef DCRN_CHCR_BASE
+#define DCRN_CHCR0 (DCRN_CHCR_BASE + 0x0) /* Chip Control Register 1 */
+#define DCRN_CHCR1 (DCRN_CHCR_BASE + 0x1) /* Chip Control Register 2 */
+#endif
+#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
+
+#ifdef DCRN_CHPSR_BASE
+#define DCRN_CHPSR (DCRN_CHPSR_BASE + 0x0) /* Chip Pin Strapping */
+#endif
+
+#ifdef DCRN_CPMFR_BASE
+#define DCRN_CPMFR (DCRN_CPMFR_BASE + 0x0) /* CPM Force */
+#endif
+
+#ifdef DCRN_CPMSR_BASE
+#define DCRN_CPMSR (DCRN_CPMSR_BASE + 0x0) /* CPM Status */
+#define DCRN_CPMER (DCRN_CPMSR_BASE + 0x1) /* CPM Enable */
+#endif
+
+#ifdef DCRN_DCP0_BASE
+/* Decompression Controller Address */
+#define DCRN_DCP0_CFGADDR (DCRN_DCP0_BASE + 0x0)
+/* Decompression Controller Data */
+#define DCRN_DCP0_CFGDATA (DCRN_DCP0_BASE + 0x1)
+#else
+#define DCRN_DCP0_CFGADDR 0x0
+#define DCRN_DCP0_CFGDATA 0x0
+#endif
+
+#ifdef DCRN_DMA0_BASE
+/* DMA Channel Control Register 0 */
+#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0)
+#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count Register 0 */
+/* DMA Destination Address Register 0 */
+#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x2)
+/* DMA Source Address Register 0 */
+#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3)
+#ifdef DCRNCAP_DMA_CC
+/* DMA Chained Count Register 0 */
+#define DCRN_DMACC0 (DCRN_DMA0_BASE + 0x4)
+#endif
+#ifdef DCRNCAP_DMA_SG
+/* DMA Scatter/Gather Descriptor Addr 0 */
+#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x4)
+#endif
+#endif
+
+#ifdef DCRN_DMA1_BASE
+/* DMA Channel Control Register 1 */
+#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0)
+#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count Register 1 */
+/* DMA Destination Address Register 1 */
+#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x2)
+/* DMA Source Address Register 1 */
+#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Source Address Register 1 */
+#ifdef DCRNCAP_DMA_CC
+/* DMA Chained Count Register 1 */
+#define DCRN_DMACC1 (DCRN_DMA1_BASE + 0x4)
+#endif
+#ifdef DCRNCAP_DMA_SG
+/* DMA Scatter/Gather Descriptor Addr 1 */
+#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x4)
+#endif
+#endif
+
+#ifdef DCRN_DMA2_BASE
+#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control Register 2 */
+#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count Register 2 */
+#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x2) /* DMA Destination Address Register 2 */
+#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Source Address Register 2 */
+#ifdef DCRNCAP_DMA_CC
+#define DCRN_DMACC2 (DCRN_DMA2_BASE + 0x4) /* DMA Chained Count Register 2 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 2 */
+#endif
+#endif
+
+#ifdef DCRN_DMA3_BASE
+#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control Register 3 */
+#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count Register 3 */
+#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x2) /* DMA Destination Address Register 3 */
+#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Source Address Register 3 */
+#ifdef DCRNCAP_DMA_CC
+#define DCRN_DMACC3 (DCRN_DMA3_BASE + 0x4) /* DMA Chained Count Register 3 */
+#endif
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 3 */
+#endif
+#endif
+
+#ifdef DCRN_DMASR_BASE
+#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
+#ifdef DCRNCAP_DMA_SG
+#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
+/* don't know if these two registers always exist if scatter/gather exists */
+#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
+#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
+#endif
+#endif
+
+#ifdef DCRN_EBC_BASE
+#define DCRN_EBCCFGADR (DCRN_EBC_BASE + 0x0) /* Peripheral Controller Address */
+#define DCRN_EBCCFGDATA (DCRN_EBC_BASE + 0x1) /* Peripheral Controller Data */
+#endif
+
+#ifdef DCRN_EXIER_BASE
+#define DCRN_EXIER (DCRN_EXIER_BASE + 0x0) /* External Interrupt Enable Register */
+#endif
+
+#ifdef DCRN_EXISR_BASE
+#define DCRN_EXISR (DCRN_EXISR_BASE + 0x0) /* External Interrupt Status Register */
+#endif
+
+#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
+#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
+#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
+#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
+#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
+#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
+#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
+#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
+#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
+#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
+#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
+#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
+#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
+#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
+
+#ifdef DCRN_IOCR_BASE
+#define DCRN_IOCR (DCRN_IOCR_BASE + 0x0) /* Input/Output Configuration Register */
+#endif
+#define IOCR_E0TE 0x80000000
+#define IOCR_E0LP 0x40000000
+#define IOCR_E1TE 0x20000000
+#define IOCR_E1LP 0x10000000
+#define IOCR_E2TE 0x08000000
+#define IOCR_E2LP 0x04000000
+#define IOCR_E3TE 0x02000000
+#define IOCR_E3LP 0x01000000
+#define IOCR_E4TE 0x00800000
+#define IOCR_E4LP 0x00400000
+#define IOCR_EDT 0x00080000
+#define IOCR_SOR 0x00040000
+#define IOCR_EDO 0x00008000
+#define IOCR_2XC 0x00004000
+#define IOCR_ATC 0x00002000
+#define IOCR_SPD 0x00001000
+#define IOCR_BEM 0x00000800
+#define IOCR_PTD 0x00000400
+#define IOCR_ARE 0x00000080
+#define IOCR_DRC 0x00000020
+#define IOCR_RDM(x) (((x) & 0x3) << 3)
+#define IOCR_TCS 0x00000004
+#define IOCR_SCS 0x00000002
+#define IOCR_SPC 0x00000001
+
+#define DCRN_MALCR(base) (base + 0x0) /* MAL Configuration */
+#define DCRN_MALDBR(base) ((base) + 0x3) /* Debug Register */
+#define DCRN_MALESR(base) ((base) + 0x1) /* Error Status */
+#define DCRN_MALIER(base) ((base) + 0x2) /* Interrupt Enable */
+#define DCRN_MALTXCARR(base) ((base) + 0x5) /* TX Channed Active Reset Register */
+#define DCRN_MALTXCASR(base) ((base) + 0x4) /* TX Channel Active Set Register */
+#define DCRN_MALTXDEIR(base) ((base) + 0x7) /* Tx Descriptor Error Interrupt */
+#define DCRN_MALTXEOBISR(base) ((base) + 0x6) /* Tx End of Buffer Interrupt Status */
+#define DCRN_MALRXCARR(base) ((base) + 0x11) /* RX Channed Active Reset Register */
+#define DCRN_MALRXCASR(base) ((base) + 0x10) /* RX Channel Active Set Register */
+#define DCRN_MALRXDEIR(base) ((base) + 0x13) /* Rx Descriptor Error Interrupt */
+#define DCRN_MALRXEOBISR(base) ((base) + 0x12) /* Rx End of Buffer Interrupt Status */
+#define DCRN_MALRXCTP0R(base) ((base) + 0x40) /* Channel Rx 0 Channel Table Pointer */
+#define DCRN_MALRXCTP1R(base) ((base) + 0x41) /* Channel Rx 1 Channel Table Pointer */
+#define DCRN_MALTXCTP0R(base) ((base) + 0x20) /* Channel Tx 0 Channel Table Pointer */
+#define DCRN_MALTXCTP1R(base) ((base) + 0x21) /* Channel Tx 1 Channel Table Pointer */
+#define DCRN_MALTXCTP2R(base) ((base) + 0x22) /* Channel Tx 2 Channel Table Pointer */
+#define DCRN_MALTXCTP3R(base) ((base) + 0x23) /* Channel Tx 3 Channel Table Pointer */
+#define DCRN_MALRCBS0(base) ((base) + 0x60) /* Channel Rx 0 Channel Buffer Size */
+#define DCRN_MALRCBS1(base) ((base) + 0x61) /* Channel Rx 1 Channel Buffer Size */
+
+ /* DCRN_MALCR */
+#define MALCR_MMSR 0x80000000 /* MAL Software reset */
+#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
+#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
+#define MALCR_PLBP_3 0x00C00000 /* highest */
+#define MALCR_GA 0x00200000 /* Guarded Active Bit */
+#define MALCR_OA 0x00100000 /* Ordered Active Bit */
+#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
+#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
+#define MALCR_PLBLT_2 0x00020000
+#define MALCR_PLBLT_3 0x00010000
+#define MALCR_PLBLT_4 0x00008000
+#define MALCR_PLBLT_DEFAULT 0x00078000 /* JSP: Is this a valid default?? */
+#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
+#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
+#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
+#define MALCR_LEA 0x00000002 /* Locked Error Active */
+#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
+/* DCRN_MALESR */
+#define MALESR_EVB 0x80000000 /* Error Valid Bit */
+#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
+#define MALESR_DE 0x00100000 /* Descriptor Error */
+#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
+#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
+#define MALESR_OSE 0x00020000 /* OPB Slave Error */
+#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
+#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
+#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
+#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
+#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
+#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
+/* DCRN_MALIER */
+#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
+#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
+#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
+#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
+#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
+/* DCRN_MALTXEOBISR */
+#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
+#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
+
+#ifdef DCRN_PLB0_BASE
+#define DCRN_PLB0_BESR (DCRN_PLB0_BASE + 0x0)
+#define DCRN_PLB0_BEAR (DCRN_PLB0_BASE + 0x2)
+/* doesn't exist on stb03xxx? */
+#define DCRN_PLB0_ACR (DCRN_PLB0_BASE + 0x3)
+#endif
+
+#ifdef DCRN_PLB1_BASE
+#define DCRN_PLB1_BESR (DCRN_PLB1_BASE + 0x0)
+#define DCRN_PLB1_BEAR (DCRN_PLB1_BASE + 0x1)
+/* doesn't exist on stb03xxx? */
+#define DCRN_PLB1_ACR (DCRN_PLB1_BASE + 0x2)
+#endif
+
+#ifdef DCRN_PLLMR_BASE
+#define DCRN_PLLMR (DCRN_PLLMR_BASE + 0x0) /* PL1 Mode */
+#endif
+
+#ifdef DCRN_POB0_BASE
+#define DCRN_POB0_BESR0 (DCRN_POB0_BASE + 0x0)
+#define DCRN_POB0_BEAR (DCRN_POB0_BASE + 0x2)
+#define DCRN_POB0_BESR1 (DCRN_POB0_BASE + 0x4)
+#endif
+
+#define DCRN_UIC_SR(base) (base + 0x0)
+#define DCRN_UIC_ER(base) (base + 0x2)
+#define DCRN_UIC_CR(base) (base + 0x3)
+#define DCRN_UIC_PR(base) (base + 0x4)
+#define DCRN_UIC_TR(base) (base + 0x5)
+#define DCRN_UIC_MSR(base) (base + 0x6)
+#define DCRN_UIC_VR(base) (base + 0x7)
+#define DCRN_UIC_VCR(base) (base + 0x8)
+
+#ifdef DCRN_SDRAM0_BASE
+#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Memory Controller Address */
+#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Memory Controller Data */
+#endif
+
+#ifdef DCRN_OCM0_BASE
+#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
+#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
+#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
+#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
+#endif
+
+#endif /* __ASM_IBM405_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
new file mode 100644
index 0000000..87f0511
--- /dev/null
+++ b/include/asm-ppc/ibm44x.h
@@ -0,0 +1,599 @@
+/*
+ * include/asm-ppc/ibm44x.h
+ *
+ * PPC44x definitions
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM44x_H__
+#define __ASM_IBM44x_H__
+
+#include <linux/config.h>
+
+#ifndef NR_BOARD_IRQS
+#define NR_BOARD_IRQS 0
+#endif
+
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#define PCI_DRAM_OFFSET pci_dram_offset
+
+/* TLB entry offset/size used for pinning kernel lowmem */
+#define PPC44x_PIN_SHIFT 28
+#define PPC44x_PIN_SIZE (1 << PPC44x_PIN_SHIFT)
+
+/* Lowest TLB slot consumed by the default pinned TLBs */
+#define PPC44x_LOW_SLOT 63
+
+/* LS 32-bits of UART0 physical address location for early serial text debug */
+#ifdef CONFIG_440SP
+#define UART0_PHYS_IO_BASE 0xf0000200
+#else
+#define UART0_PHYS_IO_BASE 0x40000200
+#endif
+
+/*
+ * XXX This 36-bit trap stuff will move somewhere in syslib/
+ * when we rework/abstract the PPC44x PCI-X handling -mdp
+ */
+
+/*
+ * Standard 4GB "page" definitions
+ */
+#ifdef CONFIG_440SP
+#define PPC44x_IO_PAGE 0x0000000100000000ULL
+#define PPC44x_PCICFG_PAGE 0x0000000900000000ULL
+#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
+#define PPC44x_PCIMEM_PAGE 0x0000000a00000000ULL
+#else
+#define PPC44x_IO_PAGE 0x0000000100000000ULL
+#define PPC44x_PCICFG_PAGE 0x0000000200000000ULL
+#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
+#define PPC44x_PCIMEM_PAGE 0x0000000300000000ULL
+#endif
+
+/*
+ * 36-bit trap ranges
+ */
+#ifdef CONFIG_440SP
+#define PPC44x_IO_LO 0xf0000000UL
+#define PPC44x_IO_HI 0xf0000fffUL
+#define PPC44x_PCI0CFG_LO 0x0ec00000UL
+#define PPC44x_PCI0CFG_HI 0x0ec00007UL
+#define PPC44x_PCI1CFG_LO 0x1ec00000UL
+#define PPC44x_PCI1CFG_HI 0x1ec00007UL
+#define PPC44x_PCI2CFG_LO 0x2ec00000UL
+#define PPC44x_PCI2CFG_HI 0x2ec00007UL
+#define PPC44x_PCIMEM_LO 0x80000000UL
+#define PPC44x_PCIMEM_HI 0xdfffffffUL
+#else
+#define PPC44x_IO_LO 0x40000000UL
+#define PPC44x_IO_HI 0x40000fffUL
+#define PPC44x_PCI0CFG_LO 0x0ec00000UL
+#define PPC44x_PCI0CFG_HI 0x0ec00007UL
+#define PPC44x_PCIMEM_LO 0x80002000UL
+#define PPC44x_PCIMEM_HI 0xffffffffUL
+#endif
+
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+#ifndef __ASSEMBLY__
+
+/*
+ * DCRN definitions
+ */
+
+
+/* CPRs (440GX and 440SP) */
+#define DCRN_CPR_CONFIG_ADDR 0xc
+#define DCRN_CPR_CONFIG_DATA 0xd
+
+#define DCRN_CPR_CLKUPD 0x0020
+#define DCRN_CPR_PLLC 0x0040
+#define DCRN_CPR_PLLD 0x0060
+#define DCRN_CPR_PRIMAD 0x0080
+#define DCRN_CPR_PRIMBD 0x00a0
+#define DCRN_CPR_OPBD 0x00c0
+#define DCRN_CPR_PERD 0x00e0
+#define DCRN_CPR_MALD 0x0100
+
+/* CPRs read/write helper macros */
+#define CPR_READ(offset) ({\
+ mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
+ mfdcr(DCRN_CPR_CONFIG_DATA);})
+#define CPR_WRITE(offset, data) ({\
+ mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
+ mtdcr(DCRN_CPR_CONFIG_DATA, data);})
+
+/* SDRs (440GX and 440SP) */
+#define DCRN_SDR_CONFIG_ADDR 0xe
+#define DCRN_SDR_CONFIG_DATA 0xf
+#define DCRN_SDR_PFC0 0x4100
+#define DCRN_SDR_PFC1 0x4101
+#define DCRN_SDR_PFC1_EPS 0x1c00000
+#define DCRN_SDR_PFC1_EPS_SHIFT 22
+#define DCRN_SDR_PFC1_RMII 0x02000000
+#define DCRN_SDR_MFR 0x4300
+#define DCRN_SDR_MFR_TAH0 0x80000000 /* TAHOE0 Enable */
+#define DCRN_SDR_MFR_TAH1 0x40000000 /* TAHOE1 Enable */
+#define DCRN_SDR_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */
+#define DCRN_SDR_MFR_ECS 0x08000000 /* EMAC int clk */
+#define DCRN_SDR_MFR_T0TXFL 0x00080000
+#define DCRN_SDR_MFR_T0TXFH 0x00040000
+#define DCRN_SDR_MFR_T1TXFL 0x00020000
+#define DCRN_SDR_MFR_T1TXFH 0x00010000
+#define DCRN_SDR_MFR_E0TXFL 0x00008000
+#define DCRN_SDR_MFR_E0TXFH 0x00004000
+#define DCRN_SDR_MFR_E0RXFL 0x00002000
+#define DCRN_SDR_MFR_E0RXFH 0x00001000
+#define DCRN_SDR_MFR_E1TXFL 0x00000800
+#define DCRN_SDR_MFR_E1TXFH 0x00000400
+#define DCRN_SDR_MFR_E1RXFL 0x00000200
+#define DCRN_SDR_MFR_E1RXFH 0x00000100
+#define DCRN_SDR_MFR_E2TXFL 0x00000080
+#define DCRN_SDR_MFR_E2TXFH 0x00000040
+#define DCRN_SDR_MFR_E2RXFL 0x00000020
+#define DCRN_SDR_MFR_E2RXFH 0x00000010
+#define DCRN_SDR_MFR_E3TXFL 0x00000008
+#define DCRN_SDR_MFR_E3TXFH 0x00000004
+#define DCRN_SDR_MFR_E3RXFL 0x00000002
+#define DCRN_SDR_MFR_E3RXFH 0x00000001
+#define DCRN_SDR_UART0 0x0120
+#define DCRN_SDR_UART1 0x0121
+
+/* SDR read/write helper macros */
+#define SDR_READ(offset) ({\
+ mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
+ mfdcr(DCRN_SDR_CONFIG_DATA);})
+#define SDR_WRITE(offset, data) ({\
+ mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
+ mtdcr(DCRN_SDR_CONFIG_DATA,data);})
+
+/* DMA (excluding 440SP) */
+#define DCRN_DMA0_BASE 0x100
+#define DCRN_DMA1_BASE 0x108
+#define DCRN_DMA2_BASE 0x110
+#define DCRN_DMA3_BASE 0x118
+#define DCRN_DMASR_BASE 0x120
+#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
+#define DCRN_MAL_BASE 0x180
+
+/* UIC */
+#define DCRN_UIC0_BASE 0xc0
+#define DCRN_UIC1_BASE 0xd0
+#define DCRN_UIC2_BASE 0x210
+#define DCRN_UICB_BASE 0x200
+#define UIC0 DCRN_UIC0_BASE
+#define UIC1 DCRN_UIC1_BASE
+#define UIC2 DCRN_UIC2_BASE
+#define UICB DCRN_UICB_BASE
+
+#define DCRN_UIC_SR(base) (base + 0x0)
+#define DCRN_UIC_ER(base) (base + 0x2)
+#define DCRN_UIC_CR(base) (base + 0x3)
+#define DCRN_UIC_PR(base) (base + 0x4)
+#define DCRN_UIC_TR(base) (base + 0x5)
+#define DCRN_UIC_MSR(base) (base + 0x6)
+#define DCRN_UIC_VR(base) (base + 0x7)
+#define DCRN_UIC_VCR(base) (base + 0x8)
+
+#define UIC0_UIC1NC 0x00000002
+
+#define UICB_UIC0NC 0x40000000
+#define UICB_UIC1NC 0x10000000
+#define UICB_UIC2NC 0x04000000
+
+/* 440 MAL DCRs */
+#define DCRN_MALCR(base) (base + 0x0) /* Configuration */
+#define DCRN_MALESR(base) (base + 0x1) /* Error Status */
+#define DCRN_MALIER(base) (base + 0x2) /* Interrupt Enable */
+#define DCRN_MALTXCASR(base) (base + 0x4) /* Tx Channel Active Set */
+#define DCRN_MALTXCARR(base) (base + 0x5) /* Tx Channel Active Reset */
+#define DCRN_MALTXEOBISR(base) (base + 0x6) /* Tx End of Buffer Interrupt Status */
+#define DCRN_MALTXDEIR(base) (base + 0x7) /* Tx Descriptor Error Interrupt */
+#define DCRN_MALRXCASR(base) (base + 0x10) /* Rx Channel Active Set */
+#define DCRN_MALRXCARR(base) (base + 0x11) /* Rx Channel Active Reset */
+#define DCRN_MALRXEOBISR(base) (base + 0x12) /* Rx End of Buffer Interrupt Status */
+#define DCRN_MALRXDEIR(base) (base + 0x13) /* Rx Descriptor Error Interrupt */
+#define DCRN_MALTXCTP0R(base) (base + 0x20) /* Channel Tx 0 Channel Table Pointer */
+#define DCRN_MALTXCTP1R(base) (base + 0x21) /* Channel Tx 1 Channel Table Pointer */
+#define DCRN_MALTXCTP2R(base) (base + 0x22) /* Channel Tx 2 Channel Table Pointer */
+#define DCRN_MALTXCTP3R(base) (base + 0x23) /* Channel Tx 3 Channel Table Pointer */
+#define DCRN_MALRXCTP0R(base) (base + 0x40) /* Channel Rx 0 Channel Table Pointer */
+#define DCRN_MALRXCTP1R(base) (base + 0x41) /* Channel Rx 1 Channel Table Pointer */
+#define DCRN_MALRCBS0(base) (base + 0x60) /* Channel Rx 0 Channel Buffer Size */
+#define DCRN_MALRCBS1(base) (base + 0x61) /* Channel Rx 1 Channel Buffer Size */
+
+/* Compatibility DCRN's */
+#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */
+#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */
+#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */
+#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */
+#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */
+#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */
+#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */
+#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */
+
+#define MALCR_MMSR 0x80000000 /* MAL Software reset */
+#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
+#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
+#define MALCR_PLBP_3 0x00C00000 /* highest */
+#define MALCR_GA 0x00200000 /* Guarded Active Bit */
+#define MALCR_OA 0x00100000 /* Ordered Active Bit */
+#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
+#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
+#define MALCR_PLBLT_2 0x00020000
+#define MALCR_PLBLT_3 0x00010000
+#define MALCR_PLBLT_4 0x00008000
+#ifdef CONFIG_440GP
+#define MALCR_PLBLT_DEFAULT 0x00330000 /* PLB Latency Timer default */
+#else
+#define MALCR_PLBLT_DEFAULT 0x00ff0000 /* PLB Latency Timer default */
+#endif
+#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
+#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
+#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
+#define MALCR_LEA 0x00000002 /* Locked Error Active */
+#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
+/* DCRN_MALESR */
+#define MALESR_EVB 0x80000000 /* Error Valid Bit */
+#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
+#define MALESR_DE 0x00100000 /* Descriptor Error */
+#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
+#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
+#define MALESR_OSE 0x00020000 /* OPB Slave Error */
+#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
+#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
+#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
+#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
+#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
+#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
+/* DCRN_MALIER */
+#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
+#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
+#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
+#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
+#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
+/* DCRN_MALTXEOBISR */
+#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
+#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
+
+/* 440GP/GX PLB Arbiter DCRs */
+#define DCRN_PLB0_REVID 0x082 /* PLB Arbiter Revision ID */
+#define DCRN_PLB0_ACR 0x083 /* PLB Arbiter Control */
+#define DCRN_PLB0_BESR 0x084 /* PLB Error Status */
+#define DCRN_PLB0_BEARL 0x086 /* PLB Error Address Low */
+#define DCRN_PLB0_BEAR DCRN_PLB0_BEARL /* 40x compatibility */
+#define DCRN_PLB0_BEARH 0x087 /* PLB Error Address High */
+
+/* 440GP/GX PLB to OPB bridge DCRs */
+#define DCRN_POB0_BESR0 0x090
+#define DCRN_POB0_BESR1 0x094
+#define DCRN_POB0_BEARL 0x092
+#define DCRN_POB0_BEARH 0x093
+
+/* 440GP/GX OPB to PLB bridge DCRs */
+#define DCRN_OPB0_BSTAT 0x0a9
+#define DCRN_OPB0_BEARL 0x0aa
+#define DCRN_OPB0_BEARH 0x0ab
+
+/* 440GP Clock, PM, chip control */
+#define DCRN_CPC0_SR 0x0b0
+#define DCRN_CPC0_ER 0x0b1
+#define DCRN_CPC0_FR 0x0b2
+#define DCRN_CPC0_SYS0 0x0e0
+#define DCRN_CPC0_SYS1 0x0e1
+#define DCRN_CPC0_CUST0 0x0e2
+#define DCRN_CPC0_CUST1 0x0e3
+#define DCRN_CPC0_STRP0 0x0e4
+#define DCRN_CPC0_STRP1 0x0e5
+#define DCRN_CPC0_STRP2 0x0e6
+#define DCRN_CPC0_STRP3 0x0e7
+#define DCRN_CPC0_GPIO 0x0e8
+#define DCRN_CPC0_PLB 0x0e9
+#define DCRN_CPC0_CR1 0x0ea
+#define DCRN_CPC0_CR0 0x0eb
+#define DCRN_CPC0_MIRQ0 0x0ec
+#define DCRN_CPC0_MIRQ1 0x0ed
+#define DCRN_CPC0_JTAGID 0x0ef
+
+/* 440GP DMA controller DCRs */
+#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control 0 */
+#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count 0 */
+#define DCRN_DMASAH0 (DCRN_DMA0_BASE + 0x2) /* DMA Src Addr High 0 */
+#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Src Addr Low 0 */
+#define DCRN_DMADAH0 (DCRN_DMA0_BASE + 0x4) /* DMA Dest Addr High 0 */
+#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x5) /* DMA Dest Addr Low 0 */
+#define DCRN_ASGH0 (DCRN_DMA0_BASE + 0x6) /* DMA SG Desc Addr High 0 */
+#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x7) /* DMA SG Desc Addr Low 0 */
+
+#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) /* DMA Channel Control 1 */
+#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count 1 */
+#define DCRN_DMASAH1 (DCRN_DMA1_BASE + 0x2) /* DMA Src Addr High 1 */
+#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Src Addr Low 1 */
+#define DCRN_DMADAH1 (DCRN_DMA1_BASE + 0x4) /* DMA Dest Addr High 1 */
+#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x5) /* DMA Dest Addr Low 1 */
+#define DCRN_ASGH1 (DCRN_DMA1_BASE + 0x6) /* DMA SG Desc Addr High 1 */
+#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x7) /* DMA SG Desc Addr Low 1 */
+
+#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control 2 */
+#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count 2 */
+#define DCRN_DMASAH2 (DCRN_DMA2_BASE + 0x2) /* DMA Src Addr High 2 */
+#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Src Addr Low 2 */
+#define DCRN_DMADAH2 (DCRN_DMA2_BASE + 0x4) /* DMA Dest Addr High 2 */
+#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x5) /* DMA Dest Addr Low 2 */
+#define DCRN_ASGH2 (DCRN_DMA2_BASE + 0x6) /* DMA SG Desc Addr High 2 */
+#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x7) /* DMA SG Desc Addr Low 2 */
+
+#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control 3 */
+#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count 3 */
+#define DCRN_DMASAH3 (DCRN_DMA3_BASE + 0x2) /* DMA Src Addr High 3 */
+#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Src Addr Low 3 */
+#define DCRN_DMADAH3 (DCRN_DMA3_BASE + 0x4) /* DMA Dest Addr High 3 */
+#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x5) /* DMA Dest Addr Low 3 */
+#define DCRN_ASGH3 (DCRN_DMA3_BASE + 0x6) /* DMA SG Desc Addr High 3 */
+#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x7) /* DMA SG Desc Addr Low 3 */
+
+#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
+#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
+#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
+#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
+
+/* 440GP/440GX SDRAM controller DCRs */
+#define DCRN_SDRAM0_CFGADDR 0x010
+#define DCRN_SDRAM0_CFGDATA 0x011
+
+#define SDRAM0_B0CR 0x40
+#define SDRAM0_B1CR 0x44
+#define SDRAM0_B2CR 0x48
+#define SDRAM0_B3CR 0x4c
+
+#define SDRAM_CONFIG_BANK_ENABLE 0x00000001
+#define SDRAM_CONFIG_SIZE_MASK 0x000e0000
+#define SDRAM_CONFIG_BANK_SIZE(reg) ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17)
+#define SDRAM_CONFIG_SIZE_8M 0x00000001
+#define SDRAM_CONFIG_SIZE_16M 0x00000002
+#define SDRAM_CONFIG_SIZE_32M 0x00000003
+#define SDRAM_CONFIG_SIZE_64M 0x00000004
+#define SDRAM_CONFIG_SIZE_128M 0x00000005
+#define SDRAM_CONFIG_SIZE_256M 0x00000006
+#define SDRAM_CONFIG_SIZE_512M 0x00000007
+#define PPC44x_MEM_SIZE_8M 0x00800000
+#define PPC44x_MEM_SIZE_16M 0x01000000
+#define PPC44x_MEM_SIZE_32M 0x02000000
+#define PPC44x_MEM_SIZE_64M 0x04000000
+#define PPC44x_MEM_SIZE_128M 0x08000000
+#define PPC44x_MEM_SIZE_256M 0x10000000
+#define PPC44x_MEM_SIZE_512M 0x20000000
+#define PPC44x_MEM_SIZE_1G 0x40000000
+#define PPC44x_MEM_SIZE_2G 0x80000000
+
+/* 440SP memory controller DCRs */
+#define DCRN_MQ0_BS0BAS 0x40
+#define DCRN_MQ0_BS1BAS 0x41
+
+#define MQ0_CONFIG_SIZE_MASK 0x0000fff0
+#define MQ0_CONFIG_SIZE_8M 0x0000ffc0
+#define MQ0_CONFIG_SIZE_16M 0x0000ff80
+#define MQ0_CONFIG_SIZE_32M 0x0000ff00
+#define MQ0_CONFIG_SIZE_64M 0x0000fe00
+#define MQ0_CONFIG_SIZE_128M 0x0000fc00
+#define MQ0_CONFIG_SIZE_256M 0x0000f800
+#define MQ0_CONFIG_SIZE_512M 0x0000f000
+#define MQ0_CONFIG_SIZE_1G 0x0000e000
+#define MQ0_CONFIG_SIZE_2G 0x0000c000
+
+/* Internal SRAM Controller 440GX/440SP */
+#ifdef CONFIG_440SP
+#define DCRN_SRAM0_BASE 0x100
+#else /* 440GX */
+#define DCRN_SRAM0_BASE 0x000
+#endif
+
+#define DCRN_SRAM0_SB0CR (DCRN_SRAM0_BASE + 0x020)
+#define DCRN_SRAM0_SB1CR (DCRN_SRAM0_BASE + 0x021)
+#define DCRN_SRAM0_SB2CR (DCRN_SRAM0_BASE + 0x022)
+#define DCRN_SRAM0_SB3CR (DCRN_SRAM0_BASE + 0x023)
+#define SRAM_SBCR_BAS0 0x80000000
+#define SRAM_SBCR_BAS1 0x80010000
+#define SRAM_SBCR_BAS2 0x80020000
+#define SRAM_SBCR_BAS3 0x80030000
+#define SRAM_SBCR_BU_MASK 0x00000180
+#define SRAM_SBCR_BS_64KB 0x00000800
+#define SRAM_SBCR_BU_RO 0x00000080
+#define SRAM_SBCR_BU_RW 0x00000180
+#define DCRN_SRAM0_BEAR (DCRN_SRAM0_BASE + 0x024)
+#define DCRN_SRAM0_BESR0 (DCRN_SRAM0_BASE + 0x025)
+#define DCRN_SRAM0_BESR1 (DCRN_SRAM0_BASE + 0x026)
+#define DCRN_SRAM0_PMEG (DCRN_SRAM0_BASE + 0x027)
+#define DCRN_SRAM0_CID (DCRN_SRAM0_BASE + 0x028)
+#define DCRN_SRAM0_REVID (DCRN_SRAM0_BASE + 0x029)
+#define DCRN_SRAM0_DPC (DCRN_SRAM0_BASE + 0x02a)
+#define SRAM_DPC_ENABLE 0x80000000
+
+/* L2 Cache Controller 440GX/440SP */
+#define DCRN_L2C0_CFG 0x030
+#define L2C_CFG_L2M 0x80000000
+#define L2C_CFG_ICU 0x40000000
+#define L2C_CFG_DCU 0x20000000
+#define L2C_CFG_DCW_MASK 0x1e000000
+#define L2C_CFG_TPC 0x01000000
+#define L2C_CFG_CPC 0x00800000
+#define L2C_CFG_FRAN 0x00200000
+#define L2C_CFG_SS_MASK 0x00180000
+#define L2C_CFG_SS_256 0x00000000
+#define L2C_CFG_CPIM 0x00040000
+#define L2C_CFG_TPIM 0x00020000
+#define L2C_CFG_LIM 0x00010000
+#define L2C_CFG_PMUX_MASK 0x00007000
+#define L2C_CFG_PMUX_SNP 0x00000000
+#define L2C_CFG_PMUX_IF 0x00001000
+#define L2C_CFG_PMUX_DF 0x00002000
+#define L2C_CFG_PMUX_DS 0x00003000
+#define L2C_CFG_PMIM 0x00000800
+#define L2C_CFG_TPEI 0x00000400
+#define L2C_CFG_CPEI 0x00000200
+#define L2C_CFG_NAM 0x00000100
+#define L2C_CFG_SMCM 0x00000080
+#define L2C_CFG_NBRM 0x00000040
+#define DCRN_L2C0_CMD 0x031
+#define L2C_CMD_CLR 0x80000000
+#define L2C_CMD_DIAG 0x40000000
+#define L2C_CMD_INV 0x20000000
+#define L2C_CMD_CCP 0x10000000
+#define L2C_CMD_CTE 0x08000000
+#define L2C_CMD_STRC 0x04000000
+#define L2C_CMD_STPC 0x02000000
+#define L2C_CMD_RPMC 0x01000000
+#define L2C_CMD_HCC 0x00800000
+#define DCRN_L2C0_ADDR 0x032
+#define DCRN_L2C0_DATA 0x033
+#define DCRN_L2C0_SR 0x034
+#define L2C_SR_CC 0x80000000
+#define L2C_SR_CPE 0x40000000
+#define L2C_SR_TPE 0x20000000
+#define L2C_SR_LRU 0x10000000
+#define L2C_SR_PCS 0x08000000
+#define DCRN_L2C0_REVID 0x035
+#define DCRN_L2C0_SNP0 0x036
+#define DCRN_L2C0_SNP1 0x037
+#define L2C_SNP_BA_MASK 0xffff0000
+#define L2C_SNP_SSR_MASK 0x0000f000
+#define L2C_SNP_SSR_32G 0x0000f000
+#define L2C_SNP_ESR 0x00000800
+
+/*
+ * PCI-X definitions
+ */
+#define PCIX0_CFGA 0x0ec00000UL
+#define PCIX1_CFGA 0x1ec00000UL
+#define PCIX2_CFGA 0x2ec00000UL
+#define PCIX0_CFGD 0x0ec00004UL
+#define PCIX1_CFGD 0x1ec00004UL
+#define PCIX2_CFGD 0x2ec00004UL
+
+#define PCIX0_IO_BASE 0x0000000908000000ULL
+#define PCIX1_IO_BASE 0x0000000908000000ULL
+#define PCIX2_IO_BASE 0x0000000908000000ULL
+#define PCIX_IO_SIZE 0x00010000
+
+#ifdef CONFIG_440SP
+#define PCIX0_REG_BASE 0x000000090ec80000ULL
+#else
+#define PCIX0_REG_BASE 0x000000020ec80000ULL
+#endif
+#define PCIX_REG_OFFSET 0x10000000
+#define PCIX_REG_SIZE 0x200
+
+#define PCIX0_VENDID 0x000
+#define PCIX0_DEVID 0x002
+#define PCIX0_COMMAND 0x004
+#define PCIX0_STATUS 0x006
+#define PCIX0_REVID 0x008
+#define PCIX0_CLS 0x009
+#define PCIX0_CACHELS 0x00c
+#define PCIX0_LATTIM 0x00d
+#define PCIX0_HDTYPE 0x00e
+#define PCIX0_BIST 0x00f
+#define PCIX0_BAR0L 0x010
+#define PCIX0_BAR0H 0x014
+#define PCIX0_BAR1 0x018
+#define PCIX0_BAR2L 0x01c
+#define PCIX0_BAR2H 0x020
+#define PCIX0_BAR3 0x024
+#define PCIX0_CISPTR 0x028
+#define PCIX0_SBSYSVID 0x02c
+#define PCIX0_SBSYSID 0x02e
+#define PCIX0_EROMBA 0x030
+#define PCIX0_CAP 0x034
+#define PCIX0_RES0 0x035
+#define PCIX0_RES1 0x036
+#define PCIX0_RES2 0x038
+#define PCIX0_INTLN 0x03c
+#define PCIX0_INTPN 0x03d
+#define PCIX0_MINGNT 0x03e
+#define PCIX0_MAXLTNCY 0x03f
+#define PCIX0_BRDGOPT1 0x040
+#define PCIX0_BRDGOPT2 0x044
+#define PCIX0_ERREN 0x050
+#define PCIX0_ERRSTS 0x054
+#define PCIX0_PLBBESR 0x058
+#define PCIX0_PLBBEARL 0x05c
+#define PCIX0_PLBBEARH 0x060
+#define PCIX0_POM0LAL 0x068
+#define PCIX0_POM0LAH 0x06c
+#define PCIX0_POM0SA 0x070
+#define PCIX0_POM0PCIAL 0x074
+#define PCIX0_POM0PCIAH 0x078
+#define PCIX0_POM1LAL 0x07c
+#define PCIX0_POM1LAH 0x080
+#define PCIX0_POM1SA 0x084
+#define PCIX0_POM1PCIAL 0x088
+#define PCIX0_POM1PCIAH 0x08c
+#define PCIX0_POM2SA 0x090
+#define PCIX0_PIM0SAL 0x098
+#define PCIX0_PIM0SA PCIX0_PIM0SAL
+#define PCIX0_PIM0LAL 0x09c
+#define PCIX0_PIM0LAH 0x0a0
+#define PCIX0_PIM1SA 0x0a4
+#define PCIX0_PIM1LAL 0x0a8
+#define PCIX0_PIM1LAH 0x0ac
+#define PCIX0_PIM2SAL 0x0b0
+#define PCIX0_PIM2SA PCIX0_PIM2SAL
+#define PCIX0_PIM2LAL 0x0b4
+#define PCIX0_PIM2LAH 0x0b8
+#define PCIX0_OMCAPID 0x0c0
+#define PCIX0_OMNIPTR 0x0c1
+#define PCIX0_OMMC 0x0c2
+#define PCIX0_OMMA 0x0c4
+#define PCIX0_OMMUA 0x0c8
+#define PCIX0_OMMDATA 0x0cc
+#define PCIX0_OMMEOI 0x0ce
+#define PCIX0_PMCAPID 0x0d0
+#define PCIX0_PMNIPTR 0x0d1
+#define PCIX0_PMC 0x0d2
+#define PCIX0_PMCSR 0x0d4
+#define PCIX0_PMCSRBSE 0x0d6
+#define PCIX0_PMDATA 0x0d7
+#define PCIX0_PMSCRR 0x0d8
+#define PCIX0_CAPID 0x0dc
+#define PCIX0_NIPTR 0x0dd
+#define PCIX0_CMD 0x0de
+#define PCIX0_STS 0x0e0
+#define PCIX0_IDR 0x0e4
+#define PCIX0_CID 0x0e8
+#define PCIX0_RID 0x0ec
+#define PCIX0_PIM0SAH 0x0f8
+#define PCIX0_PIM2SAH 0x0fc
+#define PCIX0_MSGIL 0x100
+#define PCIX0_MSGIH 0x104
+#define PCIX0_MSGOL 0x108
+#define PCIX0_MSGOH 0x10c
+#define PCIX0_IM 0x1f8
+
+#define IIC_OWN 0x55
+#define IIC_CLOCK 50
+
+#undef NR_UICS
+#ifdef CONFIG_440GX
+#define NR_UICS 3
+#else
+#define NR_UICS 2
+#endif
+
+#include <asm/ibm4xx.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_IBM44x_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
new file mode 100644
index 0000000..35260af
--- /dev/null
+++ b/include/asm-ppc/ibm4xx.h
@@ -0,0 +1,124 @@
+/*
+ *
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Module name: ibm4xx.h
+ *
+ * Description:
+ * A generic include file which pulls in appropriate include files
+ * for specific board types based on configuration settings.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM4XX_H__
+#define __ASM_IBM4XX_H__
+
+#include <linux/config.h>
+#include <asm/types.h>
+
+#ifdef CONFIG_40x
+
+#if defined(CONFIG_ASH)
+#include <platforms/4xx/ash.h>
+#endif
+
+#if defined(CONFIG_BUBINGA)
+#include <platforms/4xx/bubinga.h>
+#endif
+
+#if defined(CONFIG_CPCI405)
+#include <platforms/4xx/cpci405.h>
+#endif
+
+#if defined(CONFIG_EP405)
+#include <platforms/4xx/ep405.h>
+#endif
+
+#if defined(CONFIG_OAK)
+#include <platforms/4xx/oak.h>
+#endif
+
+#if defined(CONFIG_REDWOOD_4)
+#include <platforms/4xx/redwood.h>
+#endif
+
+#if defined(CONFIG_REDWOOD_5)
+#include <platforms/4xx/redwood5.h>
+#endif
+
+#if defined(CONFIG_REDWOOD_6)
+#include <platforms/4xx/redwood6.h>
+#endif
+
+#if defined(CONFIG_SYCAMORE)
+#include <platforms/4xx/sycamore.h>
+#endif
+
+#if defined(CONFIG_WALNUT)
+#include <platforms/4xx/walnut.h>
+#endif
+
+#if defined(CONFIG_XILINX_ML300)
+#include <platforms/4xx/xilinx_ml300.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_40x
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+extern bd_t __res;
+#endif
+
+void ppc4xx_setup_arch(void);
+void ppc4xx_map_io(void);
+void ppc4xx_init_IRQ(void);
+void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7);
+#endif
+
+#ifndef PPC4xx_MACHINE_NAME
+#define PPC4xx_MACHINE_NAME "Unidentified 4xx class"
+#endif
+
+
+/* IO_BASE is for PCI I/O.
+ * ISA not supported, just here to resolve copilation.
+ */
+
+#ifndef _IO_BASE
+#define _IO_BASE 0xe8000000 /* The PCI address window */
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+#endif
+
+#elif CONFIG_44x
+
+#if defined(CONFIG_EBONY)
+#include <platforms/4xx/ebony.h>
+#endif
+
+#if defined(CONFIG_LUAN)
+#include <platforms/4xx/luan.h>
+#endif
+
+#if defined(CONFIG_OCOTEA)
+#include <platforms/4xx/ocotea.h>
+#endif
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_40x
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+extern bd_t __res;
+#endif
+#endif
+#endif /* CONFIG_40x */
+
+#endif /* __ASM_IBM4XX_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
new file mode 100644
index 0000000..8c61d93
--- /dev/null
+++ b/include/asm-ppc/ibm_ocp.h
@@ -0,0 +1,163 @@
+/*
+ * ibm_ocp.h
+ *
+ * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * Mipsys - France
+ *
+ * Derived from work (c) Armin Kuster akuster@pacbell.net
+ *
+ * Additional support and port to 2.6 LDM/sysfs by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __IBM_OCP_H__
+#define __IBM_OCP_H__
+
+#include <asm/types.h>
+
+/*
+ * IBM 4xx OCP system information
+ */
+struct ocp_sys_info_data {
+ int opb_bus_freq; /* OPB Bus Frequency (Hz) */
+ int ebc_bus_freq; /* EBC Bus Frequency (Hz) */
+};
+
+extern struct ocp_sys_info_data ocp_sys_info;
+
+/*
+ * EMAC additional data and sysfs support
+ *
+ * Note about mdio_idx: When you have a zmii, it's usually
+ * not necessary, it covers the case of the 405EP which has
+ * the MDIO lines on EMAC0 only
+ *
+ * Note about phy_map: Per EMAC map of PHY ids which should
+ * be probed by emac_probe. Different EMACs can have
+ * overlapping maps.
+ *
+ * Note, this map uses inverse logic for bits:
+ * 0 - id should be probed
+ * 1 - id should be ignored
+ *
+ * Default value of 0x00000000 - will result in usual
+ * auto-detection logic.
+ *
+ */
+
+struct ocp_func_emac_data {
+ int rgmii_idx; /* RGMII device index or -1 */
+ int rgmii_mux; /* RGMII input of this EMAC */
+ int zmii_idx; /* ZMII device index or -1 */
+ int zmii_mux; /* ZMII input of this EMAC */
+ int mal_idx; /* MAL device index */
+ int mal_rx_chan; /* MAL rx channel number */
+ int mal_tx_chan; /* MAL tx channel number */
+ int wol_irq; /* WOL interrupt */
+ int mdio_idx; /* EMAC idx of MDIO master or -1 */
+ int tah_idx; /* TAH device index or -1 */
+ int jumbo; /* Jumbo frames capable flag */
+ int phy_mode; /* PHY type or configurable mode */
+ u8 mac_addr[6]; /* EMAC mac address */
+ u32 phy_map; /* EMAC phy map */
+};
+
+/* Sysfs support */
+#define OCP_SYSFS_EMAC_DATA() \
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx) \
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux) \
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx) \
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan) \
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan) \
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq) \
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx) \
+ \
+void ocp_show_emac_data(struct device *dev) \
+{ \
+ device_create_file(dev, &dev_attr_emac_zmii_idx); \
+ device_create_file(dev, &dev_attr_emac_zmii_mux); \
+ device_create_file(dev, &dev_attr_emac_mal_idx); \
+ device_create_file(dev, &dev_attr_emac_mal_rx_chan); \
+ device_create_file(dev, &dev_attr_emac_mal_tx_chan); \
+ device_create_file(dev, &dev_attr_emac_wol_irq); \
+ device_create_file(dev, &dev_attr_emac_mdio_idx); \
+}
+
+#ifdef CONFIG_40x
+/*
+ * Helper function to copy MAC addresses from the bd_t to OCP EMAC
+ * additions.
+ *
+ * The range of EMAC indices (inclusive) to be copied are the arguments.
+ */
+static inline void ibm_ocp_set_emac(int start, int end)
+{
+ int i;
+ struct ocp_def *def;
+
+ /* Copy MAC addresses to EMAC additions */
+ for (i=start; i<=end; i++) {
+ def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
+ &__res.bi_enetaddr[i],
+ 6);
+ }
+}
+#endif
+
+/*
+ * MAL additional data and sysfs support
+ */
+struct ocp_func_mal_data {
+ int num_tx_chans; /* Number of TX channels */
+ int num_rx_chans; /* Number of RX channels */
+ int txeob_irq; /* TX End Of Buffer IRQ */
+ int rxeob_irq; /* RX End Of Buffer IRQ */
+ int txde_irq; /* TX Descriptor Error IRQ */
+ int rxde_irq; /* RX Descriptor Error IRQ */
+ int serr_irq; /* MAL System Error IRQ */
+};
+
+#define OCP_SYSFS_MAL_DATA() \
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans) \
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans) \
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq) \
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq) \
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq) \
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq) \
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq) \
+ \
+void ocp_show_mal_data(struct device *dev) \
+{ \
+ device_create_file(dev, &dev_attr_mal_num_tx_chans); \
+ device_create_file(dev, &dev_attr_mal_num_rx_chans); \
+ device_create_file(dev, &dev_attr_mal_txeob_irq); \
+ device_create_file(dev, &dev_attr_mal_rxeob_irq); \
+ device_create_file(dev, &dev_attr_mal_txde_irq); \
+ device_create_file(dev, &dev_attr_mal_rxde_irq); \
+ device_create_file(dev, &dev_attr_mal_serr_irq); \
+}
+
+/*
+ * IIC additional data and sysfs support
+ */
+struct ocp_func_iic_data {
+ int fast_mode; /* IIC fast mode enabled */
+};
+
+#define OCP_SYSFS_IIC_DATA() \
+OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode) \
+ \
+void ocp_show_iic_data(struct device *dev) \
+{ \
+ device_create_file(dev, &dev_attr_iic_fast_mode); \
+}
+#endif /* __IBM_OCP_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm_ocp_pci.h b/include/asm-ppc/ibm_ocp_pci.h
new file mode 100644
index 0000000..a81ab61
--- /dev/null
+++ b/include/asm-ppc/ibm_ocp_pci.h
@@ -0,0 +1,32 @@
+/*
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBM_OCP_PCI_H__
+#define __ASM_IBM_OCP_PCI_H__
+
+/* PCI 32 */
+
+struct pmm_regs {
+ u32 la;
+ u32 ma;
+ u32 pcila;
+ u32 pciha;
+};
+
+typedef struct pcil0_regs {
+ struct pmm_regs pmm[3];
+ u32 ptm1ms;
+ u32 ptm1la;
+ u32 ptm2ms;
+ u32 ptm2la;
+} pci0_t;
+
+#endif /* __ASM_IBM_OCP_PCI_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ide.h b/include/asm-ppc/ide.h
new file mode 100644
index 0000000..7d6e659
--- /dev/null
+++ b/include/asm-ppc/ide.h
@@ -0,0 +1,78 @@
+/*
+ * linux/include/asm-ppc/ide.h
+ *
+ * Copyright (C) 1994-1996 Linus Torvalds & authors */
+
+/*
+ * This file contains the ppc architecture specific IDE code.
+ */
+
+#ifndef __ASMPPC_IDE_H
+#define __ASMPPC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/sched.h>
+#include <asm/mpc8xx.h>
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS 8
+#endif
+
+#include <linux/config.h>
+#include <linux/hdreg.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+extern void __ide_mm_insw(void __iomem *port, void *addr, u32 count);
+extern void __ide_mm_outsw(void __iomem *port, void *addr, u32 count);
+extern void __ide_mm_insl(void __iomem *port, void *addr, u32 count);
+extern void __ide_mm_outsl(void __iomem *port, void *addr, u32 count);
+
+struct ide_machdep_calls {
+ int (*default_irq)(unsigned long base);
+ unsigned long (*default_io_base)(int index);
+ void (*ide_init_hwif)(hw_regs_t *hw,
+ unsigned long data_port,
+ unsigned long ctrl_port,
+ int *irq);
+};
+
+extern struct ide_machdep_calls ppc_ide_md;
+
+#undef SUPPORT_SLOW_DATA_PORTS
+#define SUPPORT_SLOW_DATA_PORTS 0
+
+#define IDE_ARCH_OBSOLETE_DEFAULTS
+
+static __inline__ int ide_default_irq(unsigned long base)
+{
+ if (ppc_ide_md.default_irq)
+ return ppc_ide_md.default_irq(base);
+ return 0;
+}
+
+static __inline__ unsigned long ide_default_io_base(int index)
+{
+ if (ppc_ide_md.default_io_base)
+ return ppc_ide_md.default_io_base(index);
+ return 0;
+}
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
+
+#ifdef CONFIG_PCI
+#define ide_init_default_irq(base) (0)
+#else
+#define ide_init_default_irq(base) ide_default_irq(base)
+#endif
+
+#if (defined CONFIG_APUS || defined CONFIG_BLK_DEV_MPC8xx_IDE )
+#define IDE_ARCH_ACK_INTR 1
+#define ide_ack_intr(hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1)
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMPPC_IDE_H */
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
new file mode 100644
index 0000000..50fb5e4
--- /dev/null
+++ b/include/asm-ppc/immap_85xx.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-ppc/immap_85xx.h
+ *
+ * MPC85xx Internal Memory Map
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IMMAP_85XX_H__
+#define __ASM_IMMAP_85XX_H__
+
+/* Eventually this should define all the IO block registers in 85xx */
+
+/* PCI Registers */
+typedef struct ccsr_pci {
+ uint cfg_addr; /* 0x.000 - PCI Configuration Address Register */
+ uint cfg_data; /* 0x.004 - PCI Configuration Data Register */
+ uint int_ack; /* 0x.008 - PCI Interrupt Acknowledge Register */
+ char res1[3060];
+ uint potar0; /* 0x.c00 - PCI Outbound Transaction Address Register 0 */
+ uint potear0; /* 0x.c04 - PCI Outbound Translation Extended Address Register 0 */
+ uint powbar0; /* 0x.c08 - PCI Outbound Window Base Address Register 0 */
+ char res2[4];
+ uint powar0; /* 0x.c10 - PCI Outbound Window Attributes Register 0 */
+ char res3[12];
+ uint potar1; /* 0x.c20 - PCI Outbound Transaction Address Register 1 */
+ uint potear1; /* 0x.c24 - PCI Outbound Translation Extended Address Register 1 */
+ uint powbar1; /* 0x.c28 - PCI Outbound Window Base Address Register 1 */
+ char res4[4];
+ uint powar1; /* 0x.c30 - PCI Outbound Window Attributes Register 1 */
+ char res5[12];
+ uint potar2; /* 0x.c40 - PCI Outbound Transaction Address Register 2 */
+ uint potear2; /* 0x.c44 - PCI Outbound Translation Extended Address Register 2 */
+ uint powbar2; /* 0x.c48 - PCI Outbound Window Base Address Register 2 */
+ char res6[4];
+ uint powar2; /* 0x.c50 - PCI Outbound Window Attributes Register 2 */
+ char res7[12];
+ uint potar3; /* 0x.c60 - PCI Outbound Transaction Address Register 3 */
+ uint potear3; /* 0x.c64 - PCI Outbound Translation Extended Address Register 3 */
+ uint powbar3; /* 0x.c68 - PCI Outbound Window Base Address Register 3 */
+ char res8[4];
+ uint powar3; /* 0x.c70 - PCI Outbound Window Attributes Register 3 */
+ char res9[12];
+ uint potar4; /* 0x.c80 - PCI Outbound Transaction Address Register 4 */
+ uint potear4; /* 0x.c84 - PCI Outbound Translation Extended Address Register 4 */
+ uint powbar4; /* 0x.c88 - PCI Outbound Window Base Address Register 4 */
+ char res10[4];
+ uint powar4; /* 0x.c90 - PCI Outbound Window Attributes Register 4 */
+ char res11[268];
+ uint pitar3; /* 0x.da0 - PCI Inbound Translation Address Register 3 */
+ char res12[4];
+ uint piwbar3; /* 0x.da8 - PCI Inbound Window Base Address Register 3 */
+ uint piwbear3; /* 0x.dac - PCI Inbound Window Base Extended Address Register 3 */
+ uint piwar3; /* 0x.db0 - PCI Inbound Window Attributes Register 3 */
+ char res13[12];
+ uint pitar2; /* 0x.dc0 - PCI Inbound Translation Address Register 2 */
+ char res14[4];
+ uint piwbar2; /* 0x.dc8 - PCI Inbound Window Base Address Register 2 */
+ uint piwbear2; /* 0x.dcc - PCI Inbound Window Base Extended Address Register 2 */
+ uint piwar2; /* 0x.dd0 - PCI Inbound Window Attributes Register 2 */
+ char res15[12];
+ uint pitar1; /* 0x.de0 - PCI Inbound Translation Address Register 1 */
+ char res16[4];
+ uint piwbar1; /* 0x.de8 - PCI Inbound Window Base Address Register 1 */
+ char res17[4];
+ uint piwar1; /* 0x.df0 - PCI Inbound Window Attributes Register 1 */
+ char res18[12];
+ uint err_dr; /* 0x.e00 - PCI Error Detect Register */
+ uint err_cap_dr; /* 0x.e04 - PCI Error Capture Disable Register */
+ uint err_en; /* 0x.e08 - PCI Error Enable Register */
+ uint err_attrib; /* 0x.e0c - PCI Error Attributes Capture Register */
+ uint err_addr; /* 0x.e10 - PCI Error Address Capture Register */
+ uint err_ext_addr; /* 0x.e14 - PCI Error Extended Address Capture Register */
+ uint err_dl; /* 0x.e18 - PCI Error Data Low Capture Register */
+ uint err_dh; /* 0x.e1c - PCI Error Data High Capture Register */
+ uint gas_timr; /* 0x.e20 - PCI Gasket Timer Register */
+ uint pci_timr; /* 0x.e24 - PCI Timer Register */
+ char res19[472];
+} ccsr_pci_t;
+
+/* Global Utility Registers */
+typedef struct ccsr_guts {
+ uint porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */
+ uint porbmsr; /* 0x.0004 - POR Boot Mode Status Register */
+ uint porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */
+ uint pordevsr; /* 0x.000c - POR I/O Device Status Register */
+ uint pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */
+ char res1[12];
+ uint gpporcr; /* 0x.0020 - General-Purpose POR Configuration Register */
+ char res2[12];
+ uint gpiocr; /* 0x.0030 - GPIO Control Register */
+ char res3[12];
+ uint gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */
+ char res4[12];
+ uint gpindr; /* 0x.0050 - General-Purpose Input Data Register */
+ char res5[12];
+ uint pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */
+ char res6[12];
+ uint devdisr; /* 0x.0070 - Device Disable Control */
+ char res7[12];
+ uint powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */
+ char res8[12];
+ uint mcpsumr; /* 0x.0090 - Machine Check Summary Register */
+ char res9[12];
+ uint pvr; /* 0x.00a0 - Processor Version Register */
+ uint svr; /* 0x.00a4 - System Version Register */
+ char res10[3416];
+ uint clkocr; /* 0x.0e00 - Clock Out Select Register */
+ char res11[12];
+ uint ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */
+ char res12[12];
+ uint lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */
+ char res13[61916];
+} ccsr_guts_t;
+
+#endif /* __ASM_IMMAP_85XX_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/immap_cpm2.h b/include/asm-ppc/immap_cpm2.h
new file mode 100644
index 0000000..3c23d9c
--- /dev/null
+++ b/include/asm-ppc/immap_cpm2.h
@@ -0,0 +1,648 @@
+/*
+ * CPM2 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * The Internal Memory Map for devices with CPM2 on them. This
+ * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
+ * 8560).
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_CPM2__
+#define __IMMAP_CPM2__
+
+/* System configuration registers.
+*/
+typedef struct sys_82xx_conf {
+ u32 sc_siumcr;
+ u32 sc_sypcr;
+ u8 res1[6];
+ u16 sc_swsr;
+ u8 res2[20];
+ u32 sc_bcr;
+ u8 sc_ppc_acr;
+ u8 res3[3];
+ u32 sc_ppc_alrh;
+ u32 sc_ppc_alrl;
+ u8 sc_lcl_acr;
+ u8 res4[3];
+ u32 sc_lcl_alrh;
+ u32 sc_lcl_alrl;
+ u32 sc_tescr1;
+ u32 sc_tescr2;
+ u32 sc_ltescr1;
+ u32 sc_ltescr2;
+ u32 sc_pdtea;
+ u8 sc_pdtem;
+ u8 res5[3];
+ u32 sc_ldtea;
+ u8 sc_ldtem;
+ u8 res6[163];
+} sysconf_82xx_cpm2_t;
+
+typedef struct sys_85xx_conf {
+ u32 sc_cear;
+ u16 sc_ceer;
+ u16 sc_cemr;
+ u8 res1[70];
+ u32 sc_smaer;
+ u8 res2[4];
+ u32 sc_smevr;
+ u32 sc_smctr;
+ u32 sc_lmaer;
+ u8 res3[4];
+ u32 sc_lmevr;
+ u32 sc_lmctr;
+ u8 res4[144];
+} sysconf_85xx_cpm2_t;
+
+typedef union sys_conf {
+ sysconf_82xx_cpm2_t siu_82xx;
+ sysconf_85xx_cpm2_t siu_85xx;
+} sysconf_cpm2_t;
+
+
+
+/* Memory controller registers.
+*/
+typedef struct mem_ctlr {
+ u32 memc_br0;
+ u32 memc_or0;
+ u32 memc_br1;
+ u32 memc_or1;
+ u32 memc_br2;
+ u32 memc_or2;
+ u32 memc_br3;
+ u32 memc_or3;
+ u32 memc_br4;
+ u32 memc_or4;
+ u32 memc_br5;
+ u32 memc_or5;
+ u32 memc_br6;
+ u32 memc_or6;
+ u32 memc_br7;
+ u32 memc_or7;
+ u32 memc_br8;
+ u32 memc_or8;
+ u32 memc_br9;
+ u32 memc_or9;
+ u32 memc_br10;
+ u32 memc_or10;
+ u32 memc_br11;
+ u32 memc_or11;
+ u8 res1[8];
+ u32 memc_mar;
+ u8 res2[4];
+ u32 memc_mamr;
+ u32 memc_mbmr;
+ u32 memc_mcmr;
+ u8 res3[8];
+ u16 memc_mptpr;
+ u8 res4[2];
+ u32 memc_mdr;
+ u8 res5[4];
+ u32 memc_psdmr;
+ u32 memc_lsdmr;
+ u8 memc_purt;
+ u8 res6[3];
+ u8 memc_psrt;
+ u8 res7[3];
+ u8 memc_lurt;
+ u8 res8[3];
+ u8 memc_lsrt;
+ u8 res9[3];
+ u32 memc_immr;
+ u32 memc_pcibr0;
+ u32 memc_pcibr1;
+ u8 res10[16];
+ u32 memc_pcimsk0;
+ u32 memc_pcimsk1;
+ u8 res11[52];
+} memctl_cpm2_t;
+
+/* System Integration Timers.
+*/
+typedef struct sys_int_timers {
+ u8 res1[32];
+ u16 sit_tmcntsc;
+ u8 res2[2];
+ u32 sit_tmcnt;
+ u8 res3[4];
+ u32 sit_tmcntal;
+ u8 res4[16];
+ u16 sit_piscr;
+ u8 res5[2];
+ u32 sit_pitc;
+ u32 sit_pitr;
+ u8 res6[94];
+ u8 res7[390];
+} sit_cpm2_t;
+
+#define PISCR_PIRQ_MASK ((u16)0xff00)
+#define PISCR_PS ((u16)0x0080)
+#define PISCR_PIE ((u16)0x0004)
+#define PISCR_PTF ((u16)0x0002)
+#define PISCR_PTE ((u16)0x0001)
+
+/* PCI Controller.
+*/
+typedef struct pci_ctlr {
+ u32 pci_omisr;
+ u32 pci_omimr;
+ u8 res1[8];
+ u32 pci_ifqpr;
+ u32 pci_ofqpr;
+ u8 res2[8];
+ u32 pci_imr0;
+ u32 pci_imr1;
+ u32 pci_omr0;
+ u32 pci_omr1;
+ u32 pci_odr;
+ u8 res3[4];
+ u32 pci_idr;
+ u8 res4[20];
+ u32 pci_imisr;
+ u32 pci_imimr;
+ u8 res5[24];
+ u32 pci_ifhpr;
+ u8 res6[4];
+ u32 pci_iftpr;
+ u8 res7[4];
+ u32 pci_iphpr;
+ u8 res8[4];
+ u32 pci_iptpr;
+ u8 res9[4];
+ u32 pci_ofhpr;
+ u8 res10[4];
+ u32 pci_oftpr;
+ u8 res11[4];
+ u32 pci_ophpr;
+ u8 res12[4];
+ u32 pci_optpr;
+ u8 res13[8];
+ u32 pci_mucr;
+ u8 res14[8];
+ u32 pci_qbar;
+ u8 res15[12];
+ u32 pci_dmamr0;
+ u32 pci_dmasr0;
+ u32 pci_dmacdar0;
+ u8 res16[4];
+ u32 pci_dmasar0;
+ u8 res17[4];
+ u32 pci_dmadar0;
+ u8 res18[4];
+ u32 pci_dmabcr0;
+ u32 pci_dmandar0;
+ u8 res19[86];
+ u32 pci_dmamr1;
+ u32 pci_dmasr1;
+ u32 pci_dmacdar1;
+ u8 res20[4];
+ u32 pci_dmasar1;
+ u8 res21[4];
+ u32 pci_dmadar1;
+ u8 res22[4];
+ u32 pci_dmabcr1;
+ u32 pci_dmandar1;
+ u8 res23[88];
+ u32 pci_dmamr2;
+ u32 pci_dmasr2;
+ u32 pci_dmacdar2;
+ u8 res24[4];
+ u32 pci_dmasar2;
+ u8 res25[4];
+ u32 pci_dmadar2;
+ u8 res26[4];
+ u32 pci_dmabcr2;
+ u32 pci_dmandar2;
+ u8 res27[88];
+ u32 pci_dmamr3;
+ u32 pci_dmasr3;
+ u32 pci_dmacdar3;
+ u8 res28[4];
+ u32 pci_dmasar3;
+ u8 res29[4];
+ u32 pci_dmadar3;
+ u8 res30[4];
+ u32 pci_dmabcr3;
+ u32 pci_dmandar3;
+ u8 res31[344];
+ u32 pci_potar0;
+ u8 res32[4];
+ u32 pci_pobar0;
+ u8 res33[4];
+ u32 pci_pocmr0;
+ u8 res34[4];
+ u32 pci_potar1;
+ u8 res35[4];
+ u32 pci_pobar1;
+ u8 res36[4];
+ u32 pci_pocmr1;
+ u8 res37[4];
+ u32 pci_potar2;
+ u8 res38[4];
+ u32 pci_pobar2;
+ u8 res39[4];
+ u32 pci_pocmr2;
+ u8 res40[50];
+ u32 pci_ptcr;
+ u32 pci_gpcr;
+ u32 pci_gcr;
+ u32 pci_esr;
+ u32 pci_emr;
+ u32 pci_ecr;
+ u32 pci_eacr;
+ u8 res41[4];
+ u32 pci_edcr;
+ u8 res42[4];
+ u32 pci_eccr;
+ u8 res43[44];
+ u32 pci_pitar1;
+ u8 res44[4];
+ u32 pci_pibar1;
+ u8 res45[4];
+ u32 pci_picmr1;
+ u8 res46[4];
+ u32 pci_pitar0;
+ u8 res47[4];
+ u32 pci_pibar0;
+ u8 res48[4];
+ u32 pci_picmr0;
+ u8 res49[4];
+ u32 pci_cfg_addr;
+ u32 pci_cfg_data;
+ u32 pci_int_ack;
+ u8 res50[756];
+} pci_cpm2_t;
+
+/* Interrupt Controller.
+*/
+typedef struct interrupt_controller {
+ u16 ic_sicr;
+ u8 res1[2];
+ u32 ic_sivec;
+ u32 ic_sipnrh;
+ u32 ic_sipnrl;
+ u32 ic_siprr;
+ u32 ic_scprrh;
+ u32 ic_scprrl;
+ u32 ic_simrh;
+ u32 ic_simrl;
+ u32 ic_siexr;
+ u8 res2[88];
+} intctl_cpm2_t;
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+ u32 car_sccr;
+ u8 res1[4];
+ u32 car_scmr;
+ u8 res2[4];
+ u32 car_rsr;
+ u32 car_rmr;
+ u8 res[104];
+} car_cpm2_t;
+
+/* Input/Output Port control/status registers.
+ * Names consistent with processor manual, although they are different
+ * from the original 8xx names.......
+ */
+typedef struct io_port {
+ u32 iop_pdira;
+ u32 iop_ppara;
+ u32 iop_psora;
+ u32 iop_podra;
+ u32 iop_pdata;
+ u8 res1[12];
+ u32 iop_pdirb;
+ u32 iop_pparb;
+ u32 iop_psorb;
+ u32 iop_podrb;
+ u32 iop_pdatb;
+ u8 res2[12];
+ u32 iop_pdirc;
+ u32 iop_pparc;
+ u32 iop_psorc;
+ u32 iop_podrc;
+ u32 iop_pdatc;
+ u8 res3[12];
+ u32 iop_pdird;
+ u32 iop_ppard;
+ u32 iop_psord;
+ u32 iop_podrd;
+ u32 iop_pdatd;
+ u8 res4[12];
+} iop_cpm2_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+ u8 cpmt_tgcr1;
+ u8 res1[3];
+ u8 cpmt_tgcr2;
+ u8 res2[11];
+ u16 cpmt_tmr1;
+ u16 cpmt_tmr2;
+ u16 cpmt_trr1;
+ u16 cpmt_trr2;
+ u16 cpmt_tcr1;
+ u16 cpmt_tcr2;
+ u16 cpmt_tcn1;
+ u16 cpmt_tcn2;
+ u16 cpmt_tmr3;
+ u16 cpmt_tmr4;
+ u16 cpmt_trr3;
+ u16 cpmt_trr4;
+ u16 cpmt_tcr3;
+ u16 cpmt_tcr4;
+ u16 cpmt_tcn3;
+ u16 cpmt_tcn4;
+ u16 cpmt_ter1;
+ u16 cpmt_ter2;
+ u16 cpmt_ter3;
+ u16 cpmt_ter4;
+ u8 res3[584];
+} cpmtimer_cpm2_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+ u8 res0[24];
+ u8 sdma_sdsr;
+ u8 res1[3];
+ u8 sdma_sdmr;
+ u8 res2[3];
+ u8 sdma_idsr1;
+ u8 res3[3];
+ u8 sdma_idmr1;
+ u8 res4[3];
+ u8 sdma_idsr2;
+ u8 res5[3];
+ u8 sdma_idmr2;
+ u8 res6[3];
+ u8 sdma_idsr3;
+ u8 res7[3];
+ u8 sdma_idmr3;
+ u8 res8[3];
+ u8 sdma_idsr4;
+ u8 res9[3];
+ u8 sdma_idmr4;
+ u8 res10[707];
+} sdma_cpm2_t;
+
+/* Fast controllers
+*/
+typedef struct fcc {
+ u32 fcc_gfmr;
+ u32 fcc_fpsmr;
+ u16 fcc_ftodr;
+ u8 res1[2];
+ u16 fcc_fdsr;
+ u8 res2[2];
+ u16 fcc_fcce;
+ u8 res3[2];
+ u16 fcc_fccm;
+ u8 res4[2];
+ u8 fcc_fccs;
+ u8 res5[3];
+ u8 fcc_ftirr_phy[4];
+} fcc_t;
+
+/* Fast controllers continued
+ */
+typedef struct fcc_c {
+ u32 fcc_firper;
+ u32 fcc_firer;
+ u32 fcc_firsr_hi;
+ u32 fcc_firsr_lo;
+ u8 fcc_gfemr;
+ u8 res1[15];
+} fcc_c_t;
+
+/* TC Layer
+ */
+typedef struct tclayer {
+ u16 tc_tcmode;
+ u16 tc_cdsmr;
+ u16 tc_tcer;
+ u16 tc_rcc;
+ u16 tc_tcmr;
+ u16 tc_fcc;
+ u16 tc_ccc;
+ u16 tc_icc;
+ u16 tc_tcc;
+ u16 tc_ecc;
+ u8 res1[12];
+} tclayer_t;
+
+
+/* I2C
+*/
+typedef struct i2c {
+ u8 i2c_i2mod;
+ u8 res1[3];
+ u8 i2c_i2add;
+ u8 res2[3];
+ u8 i2c_i2brg;
+ u8 res3[3];
+ u8 i2c_i2com;
+ u8 res4[3];
+ u8 i2c_i2cer;
+ u8 res5[3];
+ u8 i2c_i2cmr;
+ u8 res6[331];
+} i2c_cpm2_t;
+
+typedef struct scc { /* Serial communication channels */
+ u32 scc_gsmrl;
+ u32 scc_gsmrh;
+ u16 scc_psmr;
+ u8 res1[2];
+ u16 scc_todr;
+ u16 scc_dsr;
+ u16 scc_scce;
+ u8 res2[2];
+ u16 scc_sccm;
+ u8 res3;
+ u8 scc_sccs;
+ u8 res4[8];
+} scc_t;
+
+typedef struct smc { /* Serial management channels */
+ u8 res1[2];
+ u16 smc_smcmr;
+ u8 res2[2];
+ u8 smc_smce;
+ u8 res3[3];
+ u8 smc_smcm;
+ u8 res4[5];
+} smc_t;
+
+/* Serial Peripheral Interface.
+*/
+typedef struct spi_ctrl {
+ u16 spi_spmode;
+ u8 res1[4];
+ u8 spi_spie;
+ u8 res2[3];
+ u8 spi_spim;
+ u8 res3[2];
+ u8 spi_spcom;
+ u8 res4[82];
+} spictl_cpm2_t;
+
+/* CPM Mux.
+*/
+typedef struct cpmux {
+ u8 cmx_si1cr;
+ u8 res1;
+ u8 cmx_si2cr;
+ u8 res2;
+ u32 cmx_fcr;
+ u32 cmx_scr;
+ u8 cmx_smr;
+ u8 res3;
+ u16 cmx_uar;
+ u8 res4[16];
+} cpmux_t;
+
+/* SIRAM control
+*/
+typedef struct siram {
+ u16 si_amr;
+ u16 si_bmr;
+ u16 si_cmr;
+ u16 si_dmr;
+ u8 si_gmr;
+ u8 res1;
+ u8 si_cmdr;
+ u8 res2;
+ u8 si_str;
+ u8 res3;
+ u16 si_rsr;
+} siramctl_t;
+
+typedef struct mcc {
+ u16 mcc_mcce;
+ u8 res1[2];
+ u16 mcc_mccm;
+ u8 res2[2];
+ u8 mcc_mccf;
+ u8 res3[7];
+} mcc_t;
+
+typedef struct comm_proc {
+ u32 cp_cpcr;
+ u32 cp_rccr;
+ u8 res1[14];
+ u16 cp_rter;
+ u8 res2[2];
+ u16 cp_rtmr;
+ u16 cp_rtscr;
+ u8 res3[2];
+ u32 cp_rtsr;
+ u8 res4[12];
+} cpm_cpm2_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ u16 usb_usep1;
+ u16 usb_usep2;
+ u16 usb_usep3;
+ u16 usb_usep4;
+ u8 res2[4];
+ u16 usb_usber;
+ u8 res3[2];
+ u16 usb_usbmr;
+ u8 usb_usbs;
+ u8 res4[7];
+} usb_cpm2_t;
+
+/* ...and the whole thing wrapped up....
+*/
+
+typedef struct immap {
+ /* Some references are into the unique and known dpram spaces,
+ * others are from the generic base.
+ */
+#define im_dprambase im_dpram1
+ u8 im_dpram1[16*1024];
+ u8 res1[16*1024];
+ u8 im_dpram2[4*1024];
+ u8 res2[8*1024];
+ u8 im_dpram3[4*1024];
+ u8 res3[16*1024];
+
+ sysconf_cpm2_t im_siu_conf; /* SIU Configuration */
+ memctl_cpm2_t im_memctl; /* Memory Controller */
+ sit_cpm2_t im_sit; /* System Integration Timers */
+ pci_cpm2_t im_pci; /* PCI Controller */
+ intctl_cpm2_t im_intctl; /* Interrupt Controller */
+ car_cpm2_t im_clkrst; /* Clocks and reset */
+ iop_cpm2_t im_ioport; /* IO Port control/status */
+ cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */
+ sdma_cpm2_t im_sdma; /* SDMA control/status */
+
+ fcc_t im_fcc[3]; /* Three FCCs */
+ u8 res4z[32];
+ fcc_c_t im_fcc_c[3]; /* Continued FCCs */
+
+ u8 res4[32];
+
+ tclayer_t im_tclayer[8]; /* Eight TCLayers */
+ u16 tc_tcgsr;
+ u16 tc_tcger;
+
+ /* First set of baud rate generators.
+ */
+ u8 res[236];
+ u32 im_brgc5;
+ u32 im_brgc6;
+ u32 im_brgc7;
+ u32 im_brgc8;
+
+ u8 res5[608];
+
+ i2c_cpm2_t im_i2c; /* I2C control/status */
+ cpm_cpm2_t im_cpm; /* Communication processor */
+
+ /* Second set of baud rate generators.
+ */
+ u32 im_brgc1;
+ u32 im_brgc2;
+ u32 im_brgc3;
+ u32 im_brgc4;
+
+ scc_t im_scc[4]; /* Four SCCs */
+ smc_t im_smc[2]; /* Couple of SMCs */
+ spictl_cpm2_t im_spi; /* A SPI */
+ cpmux_t im_cpmux; /* CPM clock route mux */
+ siramctl_t im_siramctl1; /* First SI RAM Control */
+ mcc_t im_mcc1; /* First MCC */
+ siramctl_t im_siramctl2; /* Second SI RAM Control */
+ mcc_t im_mcc2; /* Second MCC */
+ usb_cpm2_t im_usb; /* USB Controller */
+
+ u8 res6[1153];
+
+ u16 im_si1txram[256];
+ u8 res7[512];
+ u16 im_si1rxram[256];
+ u8 res8[512];
+ u16 im_si2txram[256];
+ u8 res9[512];
+ u16 im_si2rxram[256];
+ u8 res10[512];
+ u8 res11[4096];
+} cpm2_map_t;
+
+extern cpm2_map_t *cpm2_immr;
+
+#endif /* __IMMAP_CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
new file mode 100644
index 0000000..7eb7cf6
--- /dev/null
+++ b/include/asm-ppc/io.h
@@ -0,0 +1,566 @@
+#ifdef __KERNEL__
+#ifndef _PPC_IO_H
+#define _PPC_IO_H
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+#include <asm/byteorder.h>
+#include <asm/mmu.h>
+
+#define SIO_CONFIG_RA 0x398
+#define SIO_CONFIG_RD 0x399
+
+#define SLOW_DOWN_IO
+
+#define PMAC_ISA_MEM_BASE 0
+#define PMAC_PCI_DRAM_OFFSET 0
+#define CHRP_ISA_IO_BASE 0xf8000000
+#define CHRP_ISA_MEM_BASE 0xf7000000
+#define CHRP_PCI_DRAM_OFFSET 0
+#define PREP_ISA_IO_BASE 0x80000000
+#define PREP_ISA_MEM_BASE 0xc0000000
+#define PREP_PCI_DRAM_OFFSET 0x80000000
+
+#if defined(CONFIG_4xx)
+#include <asm/ibm4xx.h>
+#elif defined(CONFIG_8xx)
+#include <asm/mpc8xx.h>
+#elif defined(CONFIG_8260)
+#include <asm/mpc8260.h>
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+#elif defined(CONFIG_85xx)
+#include <asm/mpc85xx.h>
+#elif defined(CONFIG_APUS)
+#define _IO_BASE 0
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+#else /* Everyone else */
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#define PCI_DRAM_OFFSET pci_dram_offset
+#endif /* Platform-dependent I/O */
+
+#define ___IO_BASE ((void __iomem *)_IO_BASE)
+extern unsigned long isa_io_base;
+extern unsigned long isa_mem_base;
+extern unsigned long pci_dram_offset;
+
+/*
+ * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
+ *
+ * Read operations have additional twi & isync to make sure the read
+ * is actually performed (i.e. the data has come back) before we start
+ * executing any following instructions.
+ */
+extern inline int in_8(volatile unsigned char __iomem *addr)
+{
+ int ret;
+
+ __asm__ __volatile__(
+ "lbz%U1%X1 %0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) : "m" (*addr));
+ return ret;
+}
+
+extern inline void out_8(volatile unsigned char __iomem *addr, int val)
+{
+ __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+
+extern inline int in_le16(volatile unsigned short __iomem *addr)
+{
+ int ret;
+
+ __asm__ __volatile__("lhbrx %0,0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) :
+ "r" (addr), "m" (*addr));
+ return ret;
+}
+
+extern inline int in_be16(volatile unsigned short __iomem *addr)
+{
+ int ret;
+
+ __asm__ __volatile__("lhz%U1%X1 %0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) : "m" (*addr));
+ return ret;
+}
+
+extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
+{
+ __asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) :
+ "r" (val), "r" (addr));
+}
+
+extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
+{
+ __asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+
+extern inline unsigned in_le32(volatile unsigned __iomem *addr)
+{
+ unsigned ret;
+
+ __asm__ __volatile__("lwbrx %0,0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) :
+ "r" (addr), "m" (*addr));
+ return ret;
+}
+
+extern inline unsigned in_be32(volatile unsigned __iomem *addr)
+{
+ unsigned ret;
+
+ __asm__ __volatile__("lwz%U1%X1 %0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) : "m" (*addr));
+ return ret;
+}
+
+extern inline void out_le32(volatile unsigned __iomem *addr, int val)
+{
+ __asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) :
+ "r" (val), "r" (addr));
+}
+
+extern inline void out_be32(volatile unsigned __iomem *addr, int val)
+{
+ __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+#if defined (CONFIG_8260_PCI9)
+#define readb(addr) in_8((volatile u8 *)(addr))
+#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
+#else
+static inline __u8 readb(volatile void __iomem *addr)
+{
+ return in_8(addr);
+}
+static inline void writeb(__u8 b, volatile void __iomem *addr)
+{
+ out_8(addr, b);
+}
+#endif
+
+#if defined(CONFIG_APUS)
+static inline __u16 readw(volatile void __iomem *addr)
+{
+ return *(__force volatile __u16 *)(addr);
+}
+static inline __u32 readl(volatile void __iomem *addr)
+{
+ return *(__force volatile __u32 *)(addr);
+}
+static inline void writew(__u16 b, volatile void __iomem *addr)
+{
+ *(__force volatile __u16 *)(addr) = b;
+}
+static inline void writel(__u32 b, volatile void __iomem *addr)
+{
+ *(__force volatile __u32 *)(addr) = b;
+}
+#elif defined (CONFIG_8260_PCI9)
+/* Use macros if PCI9 workaround enabled */
+#define readw(addr) in_le16((volatile u16 *)(addr))
+#define readl(addr) in_le32((volatile u32 *)(addr))
+#define writew(b,addr) out_le16((volatile u16 *)(addr),(b))
+#define writel(b,addr) out_le32((volatile u32 *)(addr),(b))
+#else
+static inline __u16 readw(volatile void __iomem *addr)
+{
+ return in_le16(addr);
+}
+static inline __u32 readl(volatile void __iomem *addr)
+{
+ return in_le32(addr);
+}
+static inline void writew(__u16 b, volatile void __iomem *addr)
+{
+ out_le16(addr, b);
+}
+static inline void writel(__u32 b, volatile void __iomem *addr)
+{
+ out_le32(addr, b);
+}
+#endif /* CONFIG_APUS */
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+static inline __u8 __raw_readb(const volatile void __iomem *addr)
+{
+ return *(__force volatile __u8 *)(addr);
+}
+static inline __u16 __raw_readw(const volatile void __iomem *addr)
+{
+ return *(__force volatile __u16 *)(addr);
+}
+static inline __u32 __raw_readl(const volatile void __iomem *addr)
+{
+ return *(__force volatile __u32 *)(addr);
+}
+static inline void __raw_writeb(__u8 b, volatile void __iomem *addr)
+{
+ *(__force volatile __u8 *)(addr) = b;
+}
+static inline void __raw_writew(__u16 b, volatile void __iomem *addr)
+{
+ *(__force volatile __u16 *)(addr) = b;
+}
+static inline void __raw_writel(__u32 b, volatile void __iomem *addr)
+{
+ *(__force volatile __u32 *)(addr) = b;
+}
+
+#define mmiowb()
+
+/*
+ * The insw/outsw/insl/outsl macros don't do byte-swapping.
+ * They are only used in practice for transferring buffers which
+ * are arrays of bytes, and byte-swapping is not appropriate in
+ * that case. - paulus
+ */
+#define insb(port, buf, ns) _insb((port)+___IO_BASE, (buf), (ns))
+#define outsb(port, buf, ns) _outsb((port)+___IO_BASE, (buf), (ns))
+#define insw(port, buf, ns) _insw_ns((port)+___IO_BASE, (buf), (ns))
+#define outsw(port, buf, ns) _outsw_ns((port)+___IO_BASE, (buf), (ns))
+#define insl(port, buf, nl) _insl_ns((port)+___IO_BASE, (buf), (nl))
+#define outsl(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl))
+
+/*
+ * On powermacs, we will get a machine check exception if we
+ * try to read data from a non-existent I/O port. Because the
+ * machine check is an asynchronous exception, it isn't
+ * well-defined which instruction SRR0 will point to when the
+ * exception occurs.
+ * With the sequence below (twi; isync; nop), we have found that
+ * the machine check occurs on one of the three instructions on
+ * all PPC implementations tested so far. The twi and isync are
+ * needed on the 601 (in fact twi; sync works too), the isync and
+ * nop are needed on 604[e|r], and any of twi, sync or isync will
+ * work on 603[e], 750, 74xx.
+ * The twi creates an explicit data dependency on the returned
+ * value which seems to be needed to make the 601 wait for the
+ * load to finish.
+ */
+
+#define __do_in_asm(name, op) \
+extern __inline__ unsigned int name(unsigned int port) \
+{ \
+ unsigned int x; \
+ __asm__ __volatile__( \
+ op " %0,0,%1\n" \
+ "1: twi 0,%0,0\n" \
+ "2: isync\n" \
+ "3: nop\n" \
+ "4:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "5: li %0,-1\n" \
+ " b 4b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,5b\n" \
+ " .long 2b,5b\n" \
+ " .long 3b,5b\n" \
+ ".previous" \
+ : "=&r" (x) \
+ : "r" (port + ___IO_BASE)); \
+ return x; \
+}
+
+#define __do_out_asm(name, op) \
+extern __inline__ void name(unsigned int val, unsigned int port) \
+{ \
+ __asm__ __volatile__( \
+ op " %0,0,%1\n" \
+ "1: sync\n" \
+ "2:\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,2b\n" \
+ ".previous" \
+ : : "r" (val), "r" (port + ___IO_BASE)); \
+}
+
+__do_out_asm(outb, "stbx")
+#ifdef CONFIG_APUS
+__do_in_asm(inb, "lbzx")
+__do_in_asm(inw, "lhz%U1%X1")
+__do_in_asm(inl, "lwz%U1%X1")
+__do_out_asm(outl,"stw%U0%X0")
+__do_out_asm(outw, "sth%U0%X0")
+#elif defined (CONFIG_8260_PCI9)
+/* in asm cannot be defined if PCI9 workaround is used */
+#define inb(port) in_8((port)+___IO_BASE)
+#define inw(port) in_le16((port)+___IO_BASE)
+#define inl(port) in_le32((port)+___IO_BASE)
+__do_out_asm(outw, "sthbrx")
+__do_out_asm(outl, "stwbrx")
+#else
+__do_in_asm(inb, "lbzx")
+__do_in_asm(inw, "lhbrx")
+__do_in_asm(inl, "lwbrx")
+__do_out_asm(outw, "sthbrx")
+__do_out_asm(outl, "stwbrx")
+
+#endif
+
+#define inb_p(port) inb((port))
+#define outb_p(val, port) outb((val), (port))
+#define inw_p(port) inw((port))
+#define outw_p(val, port) outw((val), (port))
+#define inl_p(port) inl((port))
+#define outl_p(val, port) outl((val), (port))
+
+extern void _insb(volatile u8 __iomem *port, void *buf, int ns);
+extern void _outsb(volatile u8 __iomem *port, const void *buf, int ns);
+extern void _insw(volatile u16 __iomem *port, void *buf, int ns);
+extern void _outsw(volatile u16 __iomem *port, const void *buf, int ns);
+extern void _insl(volatile u32 __iomem *port, void *buf, int nl);
+extern void _outsl(volatile u32 __iomem *port, const void *buf, int nl);
+extern void _insw_ns(volatile u16 __iomem *port, void *buf, int ns);
+extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, int ns);
+extern void _insl_ns(volatile u32 __iomem *port, void *buf, int nl);
+extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, int nl);
+
+/*
+ * The *_ns versions below don't do byte-swapping.
+ * Neither do the standard versions now, these are just here
+ * for older code.
+ */
+#define insw_ns(port, buf, ns) _insw_ns((port)+___IO_BASE, (buf), (ns))
+#define outsw_ns(port, buf, ns) _outsw_ns((port)+___IO_BASE, (buf), (ns))
+#define insl_ns(port, buf, nl) _insl_ns((port)+___IO_BASE, (buf), (nl))
+#define outsl_ns(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl))
+
+
+#define IO_SPACE_LIMIT ~0
+
+#if defined (CONFIG_8260_PCI9)
+#define memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+#else
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+ memset((void __force *)addr, val, count);
+}
+static inline void memcpy_fromio(void *dst,const volatile void __iomem *src, int count)
+{
+ memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+ memcpy((void __force *) dst, src, count);
+}
+#endif
+
+#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(void __iomem *)(b),(c),(d))
+
+/*
+ * Map in an area of physical address space, for accessing
+ * I/O devices etc.
+ */
+extern void __iomem *__ioremap(phys_addr_t address, unsigned long size,
+ unsigned long flags);
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#ifdef CONFIG_44x
+extern void __iomem *ioremap64(unsigned long long address, unsigned long size);
+#endif
+#define ioremap_nocache(addr, size) ioremap((addr), (size))
+extern void iounmap(volatile void __iomem *addr);
+extern unsigned long iopa(unsigned long addr);
+extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
+extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
+ unsigned int size, int flags);
+
+/*
+ * The PCI bus is inherently Little-Endian. The PowerPC is being
+ * run Big-Endian. Thus all values which cross the [PCI] barrier
+ * must be endian-adjusted. Also, the local DRAM has a different
+ * address from the PCI point of view, thus buffer addresses also
+ * have to be modified [mapped] appropriately.
+ */
+extern inline unsigned long virt_to_bus(volatile void * address)
+{
+#ifndef CONFIG_APUS
+ if (address == (void *)0)
+ return 0;
+ return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET;
+#else
+ return iopa ((unsigned long) address);
+#endif
+}
+
+extern inline void * bus_to_virt(unsigned long address)
+{
+#ifndef CONFIG_APUS
+ if (address == 0)
+ return NULL;
+ return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE);
+#else
+ return (void*) mm_ptov (address);
+#endif
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv, for
+ * addresses in the area where the kernel has the RAM mapped.
+ */
+extern inline unsigned long virt_to_phys(volatile void * address)
+{
+#ifndef CONFIG_APUS
+ return (unsigned long) address - KERNELBASE;
+#else
+ return iopa ((unsigned long) address);
+#endif
+}
+
+extern inline void * phys_to_virt(unsigned long address)
+{
+#ifndef CONFIG_APUS
+ return (void *) (address + KERNELBASE);
+#else
+ return (void*) mm_ptov (address);
+#endif
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
+
+/*
+ * Enforce In-order Execution of I/O:
+ * Acts as a barrier to ensure all previous I/O accesses have
+ * completed before any further ones are issued.
+ */
+extern inline void eieio(void)
+{
+ __asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+/* Enforce in-order execution of data I/O.
+ * No distinction between read/write on PPC; use eieio for all three.
+ */
+#define iobarrier_rw() eieio()
+#define iobarrier_r() eieio()
+#define iobarrier_w() eieio()
+
+static inline int check_signature(volatile void __iomem * io_addr,
+ const unsigned char *signature, int length)
+{
+ int retval = 0;
+ do {
+ if (readb(io_addr) != *signature)
+ goto out;
+ io_addr++;
+ signature++;
+ length--;
+ } while (length);
+ retval = 1;
+out:
+ return retval;
+}
+
+/*
+ * Here comes the ppc implementation of the IOMAP
+ * interfaces.
+ */
+static inline unsigned int ioread8(void __iomem *addr)
+{
+ return readb(addr);
+}
+
+static inline unsigned int ioread16(void __iomem *addr)
+{
+ return readw(addr);
+}
+
+static inline unsigned int ioread32(void __iomem *addr)
+{
+ return readl(addr);
+}
+
+static inline void iowrite8(u8 val, void __iomem *addr)
+{
+ writeb(val, addr);
+}
+
+static inline void iowrite16(u16 val, void __iomem *addr)
+{
+ writew(val, addr);
+}
+
+static inline void iowrite32(u32 val, void __iomem *addr)
+{
+ writel(val, addr);
+}
+
+static inline void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+ _insb(addr, dst, count);
+}
+
+static inline void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+ _insw_ns(addr, dst, count);
+}
+
+static inline void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+ _insl_ns(addr, dst, count);
+}
+
+static inline void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+ _outsb(addr, src, count);
+}
+
+static inline void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+ _outsw_ns(addr, src, count);
+}
+
+static inline void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+ _outsl_ns(addr, src, count);
+}
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+#endif /* _PPC_IO_H */
+
+#ifdef CONFIG_8260_PCI9
+#include <asm/mpc8260_pci9.h>
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ioctl.h b/include/asm-ppc/ioctl.h
new file mode 100644
index 0000000..93c6acf
--- /dev/null
+++ b/include/asm-ppc/ioctl.h
@@ -0,0 +1,69 @@
+#ifndef _PPC_IOCTL_H
+#define _PPC_IOCTL_H
+
+
+/*
+ * this was copied from the alpha as it's a bit cleaner there.
+ * -- Cort
+ */
+
+#define _IOC_NRBITS 8
+#define _IOC_TYPEBITS 8
+#define _IOC_SIZEBITS 13
+#define _IOC_DIRBITS 3
+
+#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT 0
+#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
+ * And this turns out useful to catch old ioctl numbers in header
+ * files for us.
+ */
+#define _IOC_NONE 1U
+#define _IOC_READ 2U
+#define _IOC_WRITE 4U
+
+#define _IOC(dir,type,nr,size) \
+ (((dir) << _IOC_DIRSHIFT) | \
+ ((type) << _IOC_TYPESHIFT) | \
+ ((nr) << _IOC_NRSHIFT) | \
+ ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+ ((sizeof(t) == sizeof(t[1]) && \
+ sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+ sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW_BAD(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR_BAD(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode them.. */
+#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* various drivers, such as the pcmcia stuff, need these... */
+#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
+
+#endif
diff --git a/include/asm-ppc/ioctls.h b/include/asm-ppc/ioctls.h
new file mode 100644
index 0000000..f5b7f2b
--- /dev/null
+++ b/include/asm-ppc/ioctls.h
@@ -0,0 +1,107 @@
+#ifndef _ASM_PPC_IOCTLS_H
+#define _ASM_PPC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX _IO('f', 1)
+#define FIONCLEX _IO('f', 2)
+#define FIOASYNC _IOW('f', 125, int)
+#define FIONBIO _IOW('f', 126, int)
+#define FIONREAD _IOR('f', 127, int)
+#define TIOCINQ FIONREAD
+#define FIOQSIZE _IOR('f', 128, loff_t)
+
+#define TIOCGETP _IOR('t', 8, struct sgttyb)
+#define TIOCSETP _IOW('t', 9, struct sgttyb)
+#define TIOCSETN _IOW('t', 10, struct sgttyb) /* TIOCSETP wo flush */
+
+#define TIOCSETC _IOW('t', 17, struct tchars)
+#define TIOCGETC _IOR('t', 18, struct tchars)
+#define TCGETS _IOR('t', 19, struct termios)
+#define TCSETS _IOW('t', 20, struct termios)
+#define TCSETSW _IOW('t', 21, struct termios)
+#define TCSETSF _IOW('t', 22, struct termios)
+
+#define TCGETA _IOR('t', 23, struct termio)
+#define TCSETA _IOW('t', 24, struct termio)
+#define TCSETAW _IOW('t', 25, struct termio)
+#define TCSETAF _IOW('t', 28, struct termio)
+
+#define TCSBRK _IO('t', 29)
+#define TCXONC _IO('t', 30)
+#define TCFLSH _IO('t', 31)
+
+#define TIOCSWINSZ _IOW('t', 103, struct winsize)
+#define TIOCGWINSZ _IOR('t', 104, struct winsize)
+#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
+#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
+#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
+
+#define TIOCGLTC _IOR('t', 116, struct ltchars)
+#define TIOCSLTC _IOW('t', 117, struct ltchars)
+#define TIOCSPGRP _IOW('t', 118, int)
+#define TIOCGPGRP _IOR('t', 119, int)
+
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+
+#define TIOCSTI 0x5412
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+# define TIOCM_LE 0x001
+# define TIOCM_DTR 0x002
+# define TIOCM_RTS 0x004
+# define TIOCM_ST 0x008
+# define TIOCM_SR 0x010
+# define TIOCM_CTS 0x020
+# define TIOCM_CAR 0x040
+# define TIOCM_RNG 0x080
+# define TIOCM_DSR 0x100
+# define TIOCM_CD TIOCM_CAR
+# define TIOCM_RI TIOCM_RNG
+
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+# define TIOCPKT_DATA 0
+# define TIOCPKT_FLUSHREAD 1
+# define TIOCPKT_FLUSHWRITE 2
+# define TIOCPKT_STOP 4
+# define TIOCPKT_START 8
+# define TIOCPKT_NOSTOP 16
+# define TIOCPKT_DOSTOP 32
+
+
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+ /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+
+#endif /* _ASM_PPC_IOCTLS_H */
diff --git a/include/asm-ppc/ipc.h b/include/asm-ppc/ipc.h
new file mode 100644
index 0000000..a46e3d9
--- /dev/null
+++ b/include/asm-ppc/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-ppc/ipcbuf.h b/include/asm-ppc/ipcbuf.h
new file mode 100644
index 0000000..fab6752
--- /dev/null
+++ b/include/asm-ppc/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __PPC_IPCBUF_H__
+#define __PPC_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for PPC architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 1 32-bit value to fill up for 8-byte alignment
+ * - 2 miscellaneous 64-bit values (so that this structure matches
+ * PPC64 ipc64_perm)
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid_t uid;
+ __kernel_gid_t gid;
+ __kernel_uid_t cuid;
+ __kernel_gid_t cgid;
+ __kernel_mode_t mode;
+ unsigned long seq;
+ unsigned int __pad2;
+ unsigned long long __unused1;
+ unsigned long long __unused2;
+};
+
+#endif /* __PPC_IPCBUF_H__ */
diff --git a/include/asm-ppc/ipic.h b/include/asm-ppc/ipic.h
new file mode 100644
index 0000000..9092b92
--- /dev/null
+++ b/include/asm-ppc/ipic.h
@@ -0,0 +1,85 @@
+/*
+ * include/asm-ppc/ipic.h
+ *
+ * IPIC external definitions and structure.
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_IPIC_H__
+#define __ASM_IPIC_H__
+
+#include <linux/irq.h>
+
+/* Flags when we init the IPIC */
+#define IPIC_SPREADMODE_GRP_A 0x00000001
+#define IPIC_SPREADMODE_GRP_D 0x00000002
+#define IPIC_SPREADMODE_MIX_A 0x00000004
+#define IPIC_SPREADMODE_MIX_B 0x00000008
+#define IPIC_DISABLE_MCP_OUT 0x00000010
+#define IPIC_IRQ0_MCP 0x00000020
+
+/* IPIC registers offsets */
+#define IPIC_SICFR 0x00 /* System Global Interrupt Configuration Register */
+#define IPIC_SIVCR 0x04 /* System Global Interrupt Vector Register */
+#define IPIC_SIPNR_H 0x08 /* System Internal Interrupt Pending Register (HIGH) */
+#define IPIC_SIPNR_L 0x0C /* System Internal Interrupt Pending Register (LOW) */
+#define IPIC_SIPRR_A 0x10 /* System Internal Interrupt group A Priority Register */
+#define IPIC_SIPRR_B 0x14 /* System Internal Interrupt group B Priority Register */
+#define IPIC_SIPRR_C 0x18 /* System Internal Interrupt group C Priority Register */
+#define IPIC_SIPRR_D 0x1C /* System Internal Interrupt group D Priority Register */
+#define IPIC_SIMSR_H 0x20 /* System Internal Interrupt Mask Register (HIGH) */
+#define IPIC_SIMSR_L 0x24 /* System Internal Interrupt Mask Register (LOW) */
+#define IPIC_SICNR 0x28 /* System Internal Interrupt Control Register */
+#define IPIC_SEPNR 0x2C /* System External Interrupt Pending Register */
+#define IPIC_SMPRR_A 0x30 /* System Mixed Interrupt group A Priority Register */
+#define IPIC_SMPRR_B 0x34 /* System Mixed Interrupt group B Priority Register */
+#define IPIC_SEMSR 0x38 /* System External Interrupt Mask Register */
+#define IPIC_SECNR 0x3C /* System External Interrupt Control Register */
+#define IPIC_SERSR 0x40 /* System Error Status Register */
+#define IPIC_SERMR 0x44 /* System Error Mask Register */
+#define IPIC_SERCR 0x48 /* System Error Control Register */
+#define IPIC_SIFCR_H 0x50 /* System Internal Interrupt Force Register (HIGH) */
+#define IPIC_SIFCR_L 0x54 /* System Internal Interrupt Force Register (LOW) */
+#define IPIC_SEFCR 0x58 /* System External Interrupt Force Register */
+#define IPIC_SERFR 0x5C /* System Error Force Register */
+#define IPIC_SCVCR 0x60 /* System Critical Interrupt Vector Register */
+#define IPIC_SMVCR 0x64 /* System Management Interrupt Vector Register */
+
+enum ipic_prio_grp {
+ IPIC_INT_GRP_A = IPIC_SIPRR_A,
+ IPIC_INT_GRP_D = IPIC_SIPRR_D,
+ IPIC_MIX_GRP_A = IPIC_SMPRR_A,
+ IPIC_MIX_GRP_B = IPIC_SMPRR_B,
+};
+
+enum ipic_mcp_irq {
+ IPIC_MCP_IRQ0 = 0,
+ IPIC_MCP_WDT = 1,
+ IPIC_MCP_SBA = 2,
+ IPIC_MCP_PCI1 = 5,
+ IPIC_MCP_PCI2 = 6,
+ IPIC_MCP_MU = 7,
+};
+
+extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
+ unsigned int irq_offset,
+ unsigned char *senses, unsigned int senses_count);
+extern int ipic_set_priority(unsigned int irq, unsigned int priority);
+extern void ipic_set_highest_priority(unsigned int irq);
+extern void ipic_set_default_priority(void);
+extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq);
+extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
+extern u32 ipic_get_mcp_status(void);
+extern void ipic_clear_mcp_status(u32 mask);
+extern int ipic_get_irq(struct pt_regs *regs);
+
+#endif /* __ASM_IPIC_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/irq.h b/include/asm-ppc/irq.h
new file mode 100644
index 0000000..06b86be
--- /dev/null
+++ b/include/asm-ppc/irq.h
@@ -0,0 +1,400 @@
+#ifdef __KERNEL__
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <linux/config.h>
+#include <asm/machdep.h> /* ppc_md */
+#include <asm/atomic.h>
+
+/*
+ * These constants are used for passing information about interrupt
+ * signal polarity and level/edge sensing to the low-level PIC chip
+ * drivers.
+ */
+#define IRQ_SENSE_MASK 0x1
+#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */
+#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */
+
+#define IRQ_POLARITY_MASK 0x2
+#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */
+#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */
+
+#if defined(CONFIG_40x)
+#include <asm/ibm4xx.h>
+
+#ifndef NR_BOARD_IRQS
+#define NR_BOARD_IRQS 0
+#endif
+
+#ifndef UIC_WIDTH /* Number of interrupts per device */
+#define UIC_WIDTH 32
+#endif
+
+#ifndef NR_UICS /* number of UIC devices */
+#define NR_UICS 1
+#endif
+
+#if defined (CONFIG_403)
+/*
+ * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
+ * 32 possible interrupts, a majority of which are not implemented on
+ * all cores. There are six configurable, external interrupt pins and
+ * there are eight internal interrupts for the on-chip serial port
+ * (SPU), DMA controller, and JTAG controller.
+ *
+ */
+
+#define NR_AIC_IRQS 32
+#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS)
+
+#elif !defined (CONFIG_403)
+
+/*
+ * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
+ * possible interrupts as well. There are seven, configurable external
+ * interrupt pins and there are 17 internal interrupts for the on-chip
+ * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
+ *
+ */
+
+
+#define NR_UIC_IRQS UIC_WIDTH
+#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+#endif
+static __inline__ int
+irq_canonicalize(int irq)
+{
+ return (irq);
+}
+
+#elif defined(CONFIG_44x)
+#include <asm/ibm44x.h>
+
+#define NR_UIC_IRQS 32
+#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+
+static __inline__ int
+irq_canonicalize(int irq)
+{
+ return (irq);
+}
+
+#elif defined(CONFIG_8xx)
+
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc8xx.h>
+
+/* The MPC8xx cores have 16 possible interrupts. There are eight
+ * possible level sensitive interrupts assigned and generated internally
+ * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
+ * There are eight external interrupts (IRQs) that can be configured
+ * as either level or edge sensitive.
+ *
+ * On some implementations, there is also the possibility of an 8259
+ * through the PCI and PCI-ISA bridges.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * and 8259 interrupt controllers so that we can uniquely identify
+ * any interrupt source with a single integer.
+ */
+#define NR_SIU_INTS 16
+#define NR_CPM_INTS 32
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 0
+#endif
+
+#define SIU_IRQ_OFFSET 0
+#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS)
+#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
+
+#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* These values must be zero-based and map 1:1 with the SIU configuration.
+ * They are used throughout the 8xx I/O subsystem to generate
+ * interrupt masks, flags, and other control patterns. This is why the
+ * current kernel assumption of the 8259 as the base controller is such
+ * a pain in the butt.
+ */
+#define SIU_IRQ0 (0) /* Highest priority */
+#define SIU_LEVEL0 (1)
+#define SIU_IRQ1 (2)
+#define SIU_LEVEL1 (3)
+#define SIU_IRQ2 (4)
+#define SIU_LEVEL2 (5)
+#define SIU_IRQ3 (6)
+#define SIU_LEVEL3 (7)
+#define SIU_IRQ4 (8)
+#define SIU_LEVEL4 (9)
+#define SIU_IRQ5 (10)
+#define SIU_LEVEL5 (11)
+#define SIU_IRQ6 (12)
+#define SIU_LEVEL6 (13)
+#define SIU_IRQ7 (14)
+#define SIU_LEVEL7 (15)
+
+/* The internal interrupts we can configure as we see fit.
+ * My personal preference is CPM at level 2, which puts it above the
+ * MBX PCI/ISA/IDE interrupts.
+ */
+#ifndef PIT_INTERRUPT
+#define PIT_INTERRUPT SIU_LEVEL0
+#endif
+#ifndef CPM_INTERRUPT
+#define CPM_INTERRUPT SIU_LEVEL2
+#endif
+#ifndef PCMCIA_INTERRUPT
+#define PCMCIA_INTERRUPT SIU_LEVEL6
+#endif
+#ifndef DEC_INTERRUPT
+#define DEC_INTERRUPT SIU_LEVEL7
+#endif
+
+/* Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+#define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
+
+/* always the same on 8xx -- Cort */
+static __inline__ int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+
+static __inline__ int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+#define NR_IRQS (NR_IPIC_INTS)
+
+#elif defined(CONFIG_85xx)
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc85xx.h>
+
+/* The MPC8560 openpic has 32 internal interrupts and 12 external
+ * interrupts.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * so that we can uniquely identify any interrupt source with a
+ * single integer.
+ */
+#define NR_CPM_INTS 64
+#define NR_EPIC_INTS 44
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 0
+#endif
+#define NUM_8259_INTERRUPTS NR_8259_INTS
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET 0
+#endif
+
+#define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* Internal IRQs on MPC85xx OpenPIC */
+
+#ifndef MPC85xx_OPENPIC_IRQ_OFFSET
+#ifdef CONFIG_CPM2
+#define MPC85xx_OPENPIC_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
+#else
+#define MPC85xx_OPENPIC_IRQ_OFFSET 0
+#endif
+#endif
+
+/* Not all of these exist on all MPC85xx implementations */
+#define MPC85xx_IRQ_L2CACHE ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_ECM ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DDR ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_LBIU ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA0 ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA1 ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA2 ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA3 ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI1 ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI2 ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_ERROR ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_BELL (10 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_TX (11 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_RX (12 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_TX (13 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_RX (14 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_TX (19 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_RX (20 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_FEC (25 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DUART (26 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_IIC1 (27 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PERFMON (28 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_SEC2 (29 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_CPM (30 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* The 12 external interrupt lines */
+#define MPC85xx_IRQ_EXT0 (32 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT1 (33 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT2 (34 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT3 (35 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT4 (36 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT5 (37 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT6 (38 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT7 (39 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT8 (40 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT9 (41 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT10 (42 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT11 (43 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* CPM related interrupts */
+#define SIU_INT_ERROR ((uint)0x00+CPM_IRQ_OFFSET)
+#define SIU_INT_I2C ((uint)0x01+CPM_IRQ_OFFSET)
+#define SIU_INT_SPI ((uint)0x02+CPM_IRQ_OFFSET)
+#define SIU_INT_RISC ((uint)0x03+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
+#define SIU_INT_USB ((uint)0x0b+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER1 ((uint)0x0c+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER2 ((uint)0x0d+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER3 ((uint)0x0e+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER4 ((uint)0x0f+CPM_IRQ_OFFSET)
+#define SIU_INT_FCC1 ((uint)0x20+CPM_IRQ_OFFSET)
+#define SIU_INT_FCC2 ((uint)0x21+CPM_IRQ_OFFSET)
+#define SIU_INT_FCC3 ((uint)0x22+CPM_IRQ_OFFSET)
+#define SIU_INT_MCC1 ((uint)0x24+CPM_IRQ_OFFSET)
+#define SIU_INT_MCC2 ((uint)0x25+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
+#define SIU_INT_PC15 ((uint)0x30+CPM_IRQ_OFFSET)
+#define SIU_INT_PC14 ((uint)0x31+CPM_IRQ_OFFSET)
+#define SIU_INT_PC13 ((uint)0x32+CPM_IRQ_OFFSET)
+#define SIU_INT_PC12 ((uint)0x33+CPM_IRQ_OFFSET)
+#define SIU_INT_PC11 ((uint)0x34+CPM_IRQ_OFFSET)
+#define SIU_INT_PC10 ((uint)0x35+CPM_IRQ_OFFSET)
+#define SIU_INT_PC9 ((uint)0x36+CPM_IRQ_OFFSET)
+#define SIU_INT_PC8 ((uint)0x37+CPM_IRQ_OFFSET)
+#define SIU_INT_PC7 ((uint)0x38+CPM_IRQ_OFFSET)
+#define SIU_INT_PC6 ((uint)0x39+CPM_IRQ_OFFSET)
+#define SIU_INT_PC5 ((uint)0x3a+CPM_IRQ_OFFSET)
+#define SIU_INT_PC4 ((uint)0x3b+CPM_IRQ_OFFSET)
+#define SIU_INT_PC3 ((uint)0x3c+CPM_IRQ_OFFSET)
+#define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ_OFFSET)
+#define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET)
+#define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET)
+
+static __inline__ int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+#else /* CONFIG_40x + CONFIG_8xx */
+/*
+ * this is the # irq's for all ppc arch's (pmac/chrp/prep)
+ * so it is the max of them all
+ */
+#define NR_IRQS 256
+
+#ifndef CONFIG_8260
+
+#define NUM_8259_INTERRUPTS 16
+
+#else /* CONFIG_8260 */
+
+/* The 8260 has an internal interrupt controller with a maximum of
+ * 64 IRQs. We will use NR_IRQs from above since it is large enough.
+ * Don't be confused by the 8260 documentation where they list an
+ * "interrupt number" and "interrupt vector". We are only interested
+ * in the interrupt vector. There are "reserved" holes where the
+ * vector number increases, but the interrupt number in the table does not.
+ * (Document errata updates have fixed this...make sure you have up to
+ * date processor documentation -- Dan).
+ */
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET 0
+#endif
+
+#define NR_CPM_INTS 64
+
+#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET)
+#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET)
+#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET)
+#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET)
+#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET)
+#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET)
+#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET)
+#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET)
+#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET)
+#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET)
+#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET)
+#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET)
+#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET)
+#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET)
+#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET)
+#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET)
+#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET)
+#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET)
+#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET)
+
+#endif /* CONFIG_8260 */
+
+/*
+ * This gets called from serial.c, which is now used on
+ * powermacs as well as prep/chrp boxes.
+ * Prep and chrp both have cascaded 8259 PICs.
+ */
+static __inline__ int irq_canonicalize(int irq)
+{
+ if (ppc_md.irq_canonicalize)
+ return ppc_md.irq_canonicalize(irq);
+ return irq;
+}
+
+#endif
+
+#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
+/* pedantic: these are long because they are used with set_bit --RR */
+extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+extern atomic_t ppc_n_lost_interrupts;
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/keylargo.h b/include/asm-ppc/keylargo.h
new file mode 100644
index 0000000..457c75a
--- /dev/null
+++ b/include/asm-ppc/keylargo.h
@@ -0,0 +1,243 @@
+/*
+ * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
+ *
+ */
+
+/* "Pangea" chipset has keylargo device-id 0x25 while core99
+ * has device-id 0x22. The rev. of the pangea one is 0, so we
+ * fake an artificial rev. in keylargo_rev by oring 0x100
+ */
+#define KL_PANGEA_REV 0x100
+
+/* offset from base for feature control registers */
+#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */
+#define KEYLARGO_FCR0 0x38
+#define KEYLARGO_FCR1 0x3c
+#define KEYLARGO_FCR2 0x40
+#define KEYLARGO_FCR3 0x44
+#define KEYLARGO_FCR4 0x48
+#define KEYLARGO_FCR5 0x4c /* Pangea only */
+
+/* K2 aditional FCRs */
+#define K2_FCR6 0x34
+#define K2_FCR7 0x30
+#define K2_FCR8 0x2c
+#define K2_FCR9 0x28
+#define K2_FCR10 0x24
+
+/* GPIO registers */
+#define KEYLARGO_GPIO_LEVELS0 0x50
+#define KEYLARGO_GPIO_LEVELS1 0x54
+#define KEYLARGO_GPIO_EXTINT_0 0x58
+#define KEYLARGO_GPIO_EXTINT_CNT 18
+#define KEYLARGO_GPIO_0 0x6A
+#define KEYLARGO_GPIO_CNT 17
+#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80
+#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04
+#define KEYLARGO_GPIO_OUTOUT_DATA 0x01
+#define KEYLARGO_GPIO_INPUT_DATA 0x02
+
+/* K2 does only extint GPIOs and does 51 of them */
+#define K2_GPIO_EXTINT_0 0x58
+#define K2_GPIO_EXTINT_CNT 51
+
+/* Specific GPIO regs */
+
+#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03)
+#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */
+
+#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05)
+
+/* Hrm... this one is only to be used on Pismo. It seeem to also
+ * control the timebase enable on other machines. Still to be
+ * experimented... --BenH.
+ */
+#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09)
+#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09)
+
+#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10)
+
+#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a)
+#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04
+#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38
+
+#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03)
+#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04)
+#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f)
+#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10)
+
+#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09)
+#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA
+
+#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e)
+
+#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a)
+#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d)
+#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d)
+#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e)
+#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f)
+
+/*
+ * Bits in feature control register. Those bits different for K2 are
+ * listed separately
+ */
+#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */
+#define KL_MBCR_MB0_IDE_ENABLE 0x00001000
+#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */
+#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */
+#define KL_MBCR_MB0_DEV_MASK 0x00007800
+#define KL_MBCR_MB0_DEV_POWER 0x00000400
+#define KL_MBCR_MB0_DEV_RESET 0x00000200
+#define KL_MBCR_MB0_ENABLE 0x00000100
+#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */
+#define KL_MBCR_MB1_IDE_ENABLE 0x10000000
+#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */
+#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */
+#define KL_MBCR_MB1_DEV_MASK 0x78000000
+#define KL_MBCR_MB1_DEV_POWER 0x04000000
+#define KL_MBCR_MB1_DEV_RESET 0x02000000
+#define KL_MBCR_MB1_ENABLE 0x01000000
+
+#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */
+#define KL0_SCC_A_INTF_ENABLE 0x00000002
+#define KL0_SCC_SLOWPCLK 0x00000004
+#define KL0_SCC_RESET 0x00000008
+#define KL0_SCCA_ENABLE 0x00000010
+#define KL0_SCCB_ENABLE 0x00000020
+#define KL0_SCC_CELL_ENABLE 0x00000040
+#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */
+#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */
+#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */
+#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */
+#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */
+#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */
+#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */
+#define KL0_USB0_PAD_SUSPEND0 0x00040000
+#define KL0_USB0_PAD_SUSPEND1 0x00080000
+#define KL0_USB0_CELL_ENABLE 0x00100000
+#define KL0_USB1_PAD_SUSPEND0 0x00400000
+#define KL0_USB1_PAD_SUSPEND1 0x00800000
+#define KL0_USB1_CELL_ENABLE 0x01000000
+#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */
+
+#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \
+ KL0_SCC_SLOWPCLK | \
+ KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
+
+#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */
+#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */
+#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */
+#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */
+#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */
+#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */
+#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */
+#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */
+#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */
+#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */
+#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */
+#define KL1_I2S0_CELL_ENABLE 0x00000400
+#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000
+#define KL1_I2S0_ENABLE 0x00002000
+#define KL1_I2S1_CELL_ENABLE 0x00020000
+#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000
+#define KL1_I2S1_ENABLE 0x00100000
+#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */
+#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */
+#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */
+#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */
+#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */
+#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */
+
+#define KL2_IOBUS_ENABLE 0x00000002
+#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */
+#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */
+#define KL2_MPIC_ENABLE 0x00020000
+#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */
+#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */
+#define KL2_MEM_IS_BIG 0x04000000
+#define KL2_CARDSEL_16 0x08000000
+
+#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */
+#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */
+#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */
+#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */
+#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */
+#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */
+#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */
+#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */
+#define KL3_CLK49_ENABLE 0x00000200
+#define KL3_CLK45_ENABLE 0x00000400
+#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */
+#define KL3_TIMER_CLK18_ENABLE 0x00001000
+#define KL3_I2S1_CLK18_ENABLE 0x00002000
+#define KL3_I2S0_CLK18_ENABLE 0x00004000
+#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */
+#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */
+#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */
+#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */
+
+/* Intrepid USB bus 2, port 0,1 */
+#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3))
+
+/* Port 0,1 : bus 0, port 2,3 : bus 1 */
+#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3))
+#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3))
+#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3))
+#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3))
+#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3))
+
+/* Pangea and Intrepid only */
+#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */
+#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */
+#define KL5_PWM_CLK32_EN 0x00000004
+#define KL5_CLK3_68_EN 0x00000010
+#define KL5_CLK32_EN 0x00000020
+
+
+/* K2 definitions */
+#define K2_FCR0_USB0_SWRESET 0x00200000
+#define K2_FCR0_USB1_SWRESET 0x02000000
+#define K2_FCR0_RING_PME_DISABLE 0x08000000
+
+#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010
+#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020
+#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000
+#define K2_FCR1_FW_CLK_ENABLE 0x00008000
+#define K2_FCR1_FW_RESET_N 0x00010000
+#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000
+#define K2_FCR1_GMAC_POWER_DOWN 0x00800000
+#define K2_FCR1_GMAC_RESET_N 0x01000000
+#define K2_FCR1_SATA_CLK_ENABLE 0x02000000
+#define K2_FCR1_SATA_POWER_DOWN 0x04000000
+#define K2_FCR1_SATA_RESET_N 0x08000000
+#define K2_FCR1_UATA_CLK_ENABLE 0x10000000
+#define K2_FCR1_UATA_RESET_N 0x40000000
+#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000
+
diff --git a/include/asm-ppc/kgdb.h b/include/asm-ppc/kgdb.h
new file mode 100644
index 0000000..1d3c927
--- /dev/null
+++ b/include/asm-ppc/kgdb.h
@@ -0,0 +1,57 @@
+/*
+ * kgdb.h: Defines and declarations for serial line source level
+ * remote debugging of the Linux kernel using gdb.
+ *
+ * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_KGDB_H
+#define _PPC_KGDB_H
+
+#ifndef __ASSEMBLY__
+
+/* Things specific to the gen550 backend. */
+struct uart_port;
+
+extern void gen550_progress(char *, unsigned short);
+extern void gen550_kgdb_map_scc(void);
+extern void gen550_init(int, struct uart_port *);
+
+/* Things specific to the pmac backend. */
+extern void zs_kgdb_hook(int tty_num);
+
+/* To init the kgdb engine. (called by serial hook)*/
+extern void set_debug_traps(void);
+
+/* To enter the debugger explicitly. */
+extern void breakpoint(void);
+
+/* For taking exceptions
+ * these are defined in traps.c
+ */
+extern void (*debugger)(struct pt_regs *regs);
+extern int (*debugger_bpt)(struct pt_regs *regs);
+extern int (*debugger_sstep)(struct pt_regs *regs);
+extern int (*debugger_iabr_match)(struct pt_regs *regs);
+extern int (*debugger_dabr_match)(struct pt_regs *regs);
+extern void (*debugger_fault_handler)(struct pt_regs *regs);
+
+/* What we bring to the party */
+int kgdb_bpt(struct pt_regs *regs);
+int kgdb_sstep(struct pt_regs *regs);
+void kgdb(struct pt_regs *regs);
+int kgdb_iabr_match(struct pt_regs *regs);
+int kgdb_dabr_match(struct pt_regs *regs);
+
+/*
+ * external low-level support routines (ie macserial.c)
+ */
+extern void kgdb_interruptible(int); /* control interrupts from serial */
+extern void putDebugChar(char); /* write a single character */
+extern char getDebugChar(void); /* read and return a single char */
+
+#endif /* !(__ASSEMBLY__) */
+#endif /* !(_PPC_KGDB_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/kmap_types.h b/include/asm-ppc/kmap_types.h
new file mode 100644
index 0000000..2589f182
--- /dev/null
+++ b/include/asm-ppc/kmap_types.h
@@ -0,0 +1,24 @@
+#ifdef __KERNEL__
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_PPC_SYNC_PAGE,
+ KM_TYPE_NR
+};
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/linkage.h b/include/asm-ppc/linkage.h
new file mode 100644
index 0000000..291c2d0
--- /dev/null
+++ b/include/asm-ppc/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-ppc/local.h b/include/asm-ppc/local.h
new file mode 100644
index 0000000..b08e3ec
--- /dev/null
+++ b/include/asm-ppc/local.h
@@ -0,0 +1,6 @@
+#ifndef __PPC_LOCAL_H
+#define __PPC_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __PPC_LOCAL_H */
diff --git a/include/asm-ppc/m48t35.h b/include/asm-ppc/m48t35.h
new file mode 100644
index 0000000..f3c5e5d
--- /dev/null
+++ b/include/asm-ppc/m48t35.h
@@ -0,0 +1,77 @@
+/*
+ * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip
+ * and
+ * Registers for the SGS-Thomson M48T37 Timekeeper RAM chip
+ * The 37 is the 35 plus alarm and century thus the offsets
+ * are shifted by the extra registers.
+ */
+
+#ifndef __PPC_M48T35_H
+#define __PPC_M48T35_H
+
+/* RTC offsets */
+#define M48T35_RTC_FLAGS (-8) /* the negative regs are really T37 only */
+#define M48T35_RTC_CENTURY (-7)
+#define M48T35_RTC_AL_SEC (-6)
+#define M48T35_RTC_AL_MIN (-5)
+#define M48T35_RTC_AL_HRS (-4)
+#define M48T35_RTC_AL_DOM (-3)
+#define M48T35_RTC_INTERRUPT (-2)
+#define M48T35_RTC_WATCHDOG (-1)
+#define M48T35_RTC_CONTROL 0 /* T35 starts here */
+#define M48T35_RTC_SECONDS 1
+#define M48T35_RTC_MINUTES 2
+#define M48T35_RTC_HOURS 3
+#define M48T35_RTC_DAY 4
+#define M48T35_RTC_DOM 5
+#define M48T35_RTC_MONTH 6
+#define M48T35_RTC_YEAR 7
+
+/* this way help us know which bits go with which regs */
+#define M48T35_RTC_FLAGS_BL 0x10
+#define M48T35_RTC_FLAGS_AF 0x40
+#define M48T35_RTC_FLAGS_WDF 0x80
+
+#define M48T35_RTC_INTERRUPT_AFE 0x80
+#define M48T35_RTC_INTERRUPT_ABE 0x20
+#define M48T35_RTC_INTERRUPT_ALL (M48T35_RTC_INTERRUPT_AFE|M48T35_RTC_INTERRUPT_ABE)
+
+#define M48T35_RTC_WATCHDOG_RB 0x03
+#define M48T35_RTC_WATCHDOG_BMB 0x7c
+#define M48T35_RTC_WATCHDOG_WDS 0x80
+#define M48T35_RTC_WATCHDOG_ALL (M48T35_RTC_WATCHDOG_RB|M48T35_RTC_WATCHDOG_BMB|M48T35_RTC_W
+
+#define M48T35_RTC_CONTROL_WRITE 0x80
+#define M48T35_RTC_CONTROL_READ 0x40
+#define M48T35_RTC_CONTROL_CAL_SIGN 0x20
+#define M48T35_RTC_CONTROL_CAL_VALUE 0x1f
+#define M48T35_RTC_CONTROL_LOCKED (M48T35_RTC_WRITE|M48T35_RTC_READ)
+#define M48T35_RTC_CONTROL_CALIBRATION (M48T35_RTC_CONTROL_CAL_SIGN|M48T35_RTC_CONTROL_CAL_VALUE)
+
+#define M48T35_RTC_SECONDS_SEC_1 0x0f
+#define M48T35_RTC_SECONDS_SEC_10 0x70
+#define M48T35_RTC_SECONDS_ST 0x80
+#define M48T35_RTC_SECONDS_SEC_ALL (M48T35_RTC_SECONDS_SEC_1|M48T35_RTC_SECONDS_SEC_10)
+
+#define M48T35_RTC_MINUTES_MIN_1 0x0f
+#define M48T35_RTC_MINUTES_MIN_10 0x70
+#define M48T35_RTC_MINUTES_MIN_ALL (M48T35_RTC_MINUTES_MIN_1|M48T35_RTC_MINUTES_MIN_10)
+
+#define M48T35_RTC_HOURS_HRS_1 0x0f
+#define M48T35_RTC_HOURS_HRS_10 0x30
+#define M48T35_RTC_HOURS_HRS_ALL (M48T35_RTC_HOURS_HRS_1|M48T35_RTC_HOURS_HRS_10)
+
+#define M48T35_RTC_DAY_DAY_1 0x03
+#define M48T35_RTC_DAY_FT 0x40
+
+#define M48T35_RTC_ALARM_OFF 0x00
+#define M48T35_RTC_WATCHDOG_OFF 0x00
+
+
+/* legacy */
+#define M48T35_RTC_SET 0x80
+#define M48T35_RTC_STOPPED 0x80
+#define M48T35_RTC_READ 0x40
+
+
+#endif
diff --git a/include/asm-ppc/m8260_pci.h b/include/asm-ppc/m8260_pci.h
new file mode 100644
index 0000000..163a6b9
--- /dev/null
+++ b/include/asm-ppc/m8260_pci.h
@@ -0,0 +1,186 @@
+/*
+ * include/asm-ppc/m8260_pci.h
+ *
+ * Definitions for the MPC8250/MPC8265/MPC8266 integrated PCI host bridge.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __M8260_PCI_H
+#define __M8260_PCI_H
+
+#include <linux/pci_ids.h>
+
+/*
+ * Define the vendor/device ID for the MPC8265.
+ */
+#define PCI_DEVICE_ID_MPC8265 ((0x18C0 << 16) | PCI_VENDOR_ID_MOTOROLA)
+
+#define M8265_PCIBR0 0x101ac
+#define M8265_PCIBR1 0x101b0
+#define M8265_PCIMSK0 0x101c4
+#define M8265_PCIMSK1 0x101c8
+
+/* Bit definitions for PCIBR registers */
+
+#define PCIBR_ENABLE 0x00000001
+
+/* Bit definitions for PCIMSK registers */
+
+#define PCIMSK_32KiB 0xFFFF8000 /* Size of window, smallest */
+#define PCIMSK_64KiB 0xFFFF0000
+#define PCIMSK_128KiB 0xFFFE0000
+#define PCIMSK_256KiB 0xFFFC0000
+#define PCIMSK_512KiB 0xFFF80000
+#define PCIMSK_1MiB 0xFFF00000
+#define PCIMSK_2MiB 0xFFE00000
+#define PCIMSK_4MiB 0xFFC00000
+#define PCIMSK_8MiB 0xFF800000
+#define PCIMSK_16MiB 0xFF000000
+#define PCIMSK_32MiB 0xFE000000
+#define PCIMSK_64MiB 0xFC000000
+#define PCIMSK_128MiB 0xF8000000
+#define PCIMSK_256MiB 0xF0000000
+#define PCIMSK_512MiB 0xE0000000
+#define PCIMSK_1GiB 0xC0000000 /* Size of window, largest */
+
+
+#define M826X_SCCR_PCI_MODE_EN 0x100
+
+
+/*
+ * Outbound ATU registers (3 sets). These registers control how 60x bus (local)
+ * addresses are translated to PCI addresses when the MPC826x is a PCI bus
+ * master (initiator).
+ */
+
+#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
+#define POTAR_REG1 0x10818
+#define POTAR_REG2 0x10830
+
+#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
+#define POBAR_REG1 0x10820
+#define POBAR_REG2 0x10838
+
+#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
+#define POCMR_REG1 0x10828
+#define POCMR_REG2 0x10840
+
+/* Bit definitions for POMCR registers */
+
+#define POCMR_MASK_4KiB 0x000FFFFF
+#define POCMR_MASK_8KiB 0x000FFFFE
+#define POCMR_MASK_16KiB 0x000FFFFC
+#define POCMR_MASK_32KiB 0x000FFFF8
+#define POCMR_MASK_64KiB 0x000FFFF0
+#define POCMR_MASK_128KiB 0x000FFFE0
+#define POCMR_MASK_256KiB 0x000FFFC0
+#define POCMR_MASK_512KiB 0x000FFF80
+#define POCMR_MASK_1MiB 0x000FFF00
+#define POCMR_MASK_2MiB 0x000FFE00
+#define POCMR_MASK_4MiB 0x000FFC00
+#define POCMR_MASK_8MiB 0x000FF800
+#define POCMR_MASK_16MiB 0x000FF000
+#define POCMR_MASK_32MiB 0x000FE000
+#define POCMR_MASK_64MiB 0x000FC000
+#define POCMR_MASK_128MiB 0x000F8000
+#define POCMR_MASK_256MiB 0x000F0000
+#define POCMR_MASK_512MiB 0x000E0000
+#define POCMR_MASK_1GiB 0x000C0000
+
+#define POCMR_ENABLE 0x80000000
+#define POCMR_PCI_IO 0x40000000
+#define POCMR_PREFETCH_EN 0x20000000
+
+/* Soft PCI reset */
+
+#define PCI_GCR_REG 0x10880
+
+/* Bit definitions for PCI_GCR registers */
+
+#define PCIGCR_PCI_BUS_EN 0x1
+
+#define PCI_EMR_REG 0x10888
+/*
+ * Inbound ATU registers (2 sets). These registers control how PCI addresses
+ * are translated to 60x bus (local) addresses when the MPC826x is a PCI bus target.
+ */
+
+#define PITAR_REG1 0x108D0
+#define PIBAR_REG1 0x108D8
+#define PICMR_REG1 0x108E0
+#define PITAR_REG0 0x108E8
+#define PIBAR_REG0 0x108F0
+#define PICMR_REG0 0x108F8
+
+/* Bit definitions for PCI Inbound Comparison Mask registers */
+
+#define PICMR_MASK_4KiB 0x000FFFFF
+#define PICMR_MASK_8KiB 0x000FFFFE
+#define PICMR_MASK_16KiB 0x000FFFFC
+#define PICMR_MASK_32KiB 0x000FFFF8
+#define PICMR_MASK_64KiB 0x000FFFF0
+#define PICMR_MASK_128KiB 0x000FFFE0
+#define PICMR_MASK_256KiB 0x000FFFC0
+#define PICMR_MASK_512KiB 0x000FFF80
+#define PICMR_MASK_1MiB 0x000FFF00
+#define PICMR_MASK_2MiB 0x000FFE00
+#define PICMR_MASK_4MiB 0x000FFC00
+#define PICMR_MASK_8MiB 0x000FF800
+#define PICMR_MASK_16MiB 0x000FF000
+#define PICMR_MASK_32MiB 0x000FE000
+#define PICMR_MASK_64MiB 0x000FC000
+#define PICMR_MASK_128MiB 0x000F8000
+#define PICMR_MASK_256MiB 0x000F0000
+#define PICMR_MASK_512MiB 0x000E0000
+#define PICMR_MASK_1GiB 0x000C0000
+
+#define PICMR_ENABLE 0x80000000
+#define PICMR_NO_SNOOP_EN 0x40000000
+#define PICMR_PREFETCH_EN 0x20000000
+
+/* PCI error Registers */
+
+#define PCI_ERROR_STATUS_REG 0x10884
+#define PCI_ERROR_MASK_REG 0x10888
+#define PCI_ERROR_CONTROL_REG 0x1088C
+#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
+#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
+#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
+
+/* PCI error Register bit defines */
+
+#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
+#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
+#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
+#define PCI_ERROR_PCI_NO_RSP 0x00000008
+#define PCI_ERROR_PCI_TAR_ABT 0x00000010
+#define PCI_ERROR_PCI_SERR 0x00000020
+#define PCI_ERROR_PCI_PERR_RD 0x00000040
+#define PCI_ERROR_PCI_PERR_WR 0x00000080
+#define PCI_ERROR_I2O_OFQO 0x00000100
+#define PCI_ERROR_I2O_IPQO 0x00000200
+#define PCI_ERROR_IRA 0x00000400
+#define PCI_ERROR_NMI 0x00000800
+#define PCI_ERROR_I2O_DBMC 0x00001000
+
+/*
+ * Register pair used to generate configuration cycles on the PCI bus
+ * and access the MPC826x's own PCI configuration registers.
+ */
+
+#define PCI_CFG_ADDR_REG 0x10900
+#define PCI_CFG_DATA_REG 0x10904
+
+/* Bus parking decides where the bus control sits when idle */
+/* If modifying memory controllers for PCI park on the core */
+
+#define PPC_ACR_BUS_PARK_CORE 0x6
+#define PPC_ACR_BUS_PARK_PCI 0x3
+
+#endif /* __M8260_PCI_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h
new file mode 100644
index 0000000..b78d408
--- /dev/null
+++ b/include/asm-ppc/machdep.h
@@ -0,0 +1,154 @@
+#ifdef __KERNEL__
+#ifndef _PPC_MACHDEP_H
+#define _PPC_MACHDEP_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#ifdef CONFIG_APUS
+#include <asm-m68k/machdep.h>
+#endif
+
+struct pt_regs;
+struct pci_bus;
+struct pci_dev;
+struct seq_file;
+struct file;
+
+/* We export this macro for external modules like Alsa to know if
+ * ppc_md.feature_call is implemented or not
+ */
+#define CONFIG_PPC_HAS_FEATURE_CALLS
+
+struct machdep_calls {
+ void (*setup_arch)(void);
+ /* Optional, may be NULL. */
+ int (*show_cpuinfo)(struct seq_file *m);
+ int (*show_percpuinfo)(struct seq_file *m, int i);
+ /* Optional, may be NULL. */
+ unsigned int (*irq_canonicalize)(unsigned int irq);
+ void (*init_IRQ)(void);
+ int (*get_irq)(struct pt_regs *);
+
+ /* A general init function, called by ppc_init in init/main.c.
+ May be NULL. */
+ void (*init)(void);
+
+ void (*restart)(char *cmd);
+ void (*power_off)(void);
+ void (*halt)(void);
+
+ void (*idle)(void);
+ void (*power_save)(void);
+
+ long (*time_init)(void); /* Optional, may be NULL */
+ int (*set_rtc_time)(unsigned long nowtime);
+ unsigned long (*get_rtc_time)(void);
+ unsigned char (*rtc_read_val)(int addr);
+ void (*rtc_write_val)(int addr, unsigned char val);
+ void (*calibrate_decr)(void);
+
+ void (*heartbeat)(void);
+ unsigned long heartbeat_reset;
+ unsigned long heartbeat_count;
+
+ unsigned long (*find_end_of_memory)(void);
+ void (*setup_io_mappings)(void);
+
+ void (*early_serial_map)(void);
+ void (*progress)(char *, unsigned short);
+ void (*kgdb_map_scc)(void);
+
+ unsigned char (*nvram_read_val)(int addr);
+ void (*nvram_write_val)(int addr, unsigned char val);
+ void (*nvram_sync)(void);
+
+ /*
+ * optional PCI "hooks"
+ */
+
+ /* Called after scanning the bus, before allocating resources */
+ void (*pcibios_fixup)(void);
+
+ /* Called after PPC generic resource fixup to perform
+ machine specific fixups */
+ void (*pcibios_fixup_resources)(struct pci_dev *);
+
+ /* Called for each PCI bus in the system when it's probed */
+ void (*pcibios_fixup_bus)(struct pci_bus *);
+
+ /* Called when pci_enable_device() is called (initial=0) or
+ * when a device with no assigned resource is found (initial=1).
+ * Returns 0 to allow assignment/enabling of the device. */
+ int (*pcibios_enable_device_hook)(struct pci_dev *, int initial);
+
+ /* For interrupt routing */
+ unsigned char (*pci_swizzle)(struct pci_dev *, unsigned char *);
+ int (*pci_map_irq)(struct pci_dev *, unsigned char, unsigned char);
+
+ /* Called in indirect_* to avoid touching devices */
+ int (*pci_exclude_device)(unsigned char, unsigned char);
+
+ /* Called at then very end of pcibios_init() */
+ void (*pcibios_after_init)(void);
+
+ /* Get access protection for /dev/mem */
+ pgprot_t (*phys_mem_access_prot)(struct file *file,
+ unsigned long offset,
+ unsigned long size,
+ pgprot_t vma_prot);
+
+ /* this is for modules, since _machine can be a define -- Cort */
+ int ppc_machine;
+
+ /* Motherboard/chipset features. This is a kind of general purpose
+ * hook used to control some machine specific features (like reset
+ * lines, chip power control, etc...).
+ */
+ long (*feature_call)(unsigned int feature, ...);
+
+#ifdef CONFIG_SMP
+ /* functions for dealing with other cpus */
+ struct smp_ops_t *smp_ops;
+#endif /* CONFIG_SMP */
+};
+
+extern struct machdep_calls ppc_md;
+extern char cmd_line[COMMAND_LINE_SIZE];
+
+extern void setup_pci_ptrs(void);
+
+/*
+ * Power macintoshes have either a CUDA or a PMU controlling
+ * system reset, power, NVRAM, RTC.
+ */
+typedef enum sys_ctrler_kind {
+ SYS_CTRLER_UNKNOWN = 0,
+ SYS_CTRLER_CUDA = 1,
+ SYS_CTRLER_PMU = 2,
+ SYS_CTRLER_SMU = 3,
+} sys_ctrler_t;
+
+extern sys_ctrler_t sys_ctrler;
+
+#ifdef CONFIG_SMP
+struct smp_ops_t {
+ void (*message_pass)(int target, int msg, unsigned long data, int wait);
+ int (*probe)(void);
+ void (*kick_cpu)(int nr);
+ void (*setup_cpu)(int nr);
+ void (*space_timers)(int nr);
+ void (*take_timebase)(void);
+ void (*give_timebase)(void);
+};
+
+/* Poor default implementations */
+extern void __devinit smp_generic_give_timebase(void);
+extern void __devinit smp_generic_take_timebase(void);
+#endif /* CONFIG_SMP */
+
+#endif /* _PPC_MACHDEP_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/macio.h b/include/asm-ppc/macio.h
new file mode 100644
index 0000000..00605bb
--- /dev/null
+++ b/include/asm-ppc/macio.h
@@ -0,0 +1,140 @@
+#ifndef __MACIO_ASIC_H__
+#define __MACIO_ASIC_H__
+
+#include <asm/of_device.h>
+
+extern struct bus_type macio_bus_type;
+
+/* MacIO device driver is defined later */
+struct macio_driver;
+struct macio_chip;
+
+#define MACIO_DEV_COUNT_RESOURCES 8
+#define MACIO_DEV_COUNT_IRQS 8
+
+/*
+ * the macio_bus structure is used to describe a "virtual" bus
+ * within a MacIO ASIC. It's typically provided by a macio_pci_asic
+ * PCI device, but could be provided differently as well (nubus
+ * machines using a fake OF tree).
+ *
+ * The pdev field can be NULL on non-PCI machines
+ */
+struct macio_bus
+{
+ struct macio_chip *chip; /* macio_chip (private use) */
+ int index; /* macio chip index in system */
+#ifdef CONFIG_PCI
+ struct pci_dev *pdev; /* PCI device hosting this bus */
+#endif
+};
+
+/*
+ * the macio_dev structure is used to describe a device
+ * within an Apple MacIO ASIC.
+ */
+struct macio_dev
+{
+ struct macio_bus *bus; /* macio bus this device is on */
+ struct macio_dev *media_bay; /* Device is part of a media bay */
+ struct of_device ofdev;
+ int n_resources;
+ struct resource resource[MACIO_DEV_COUNT_RESOURCES];
+ int n_interrupts;
+ struct resource interrupt[MACIO_DEV_COUNT_IRQS];
+};
+#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev)
+#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev)
+
+extern struct macio_dev *macio_dev_get(struct macio_dev *dev);
+extern void macio_dev_put(struct macio_dev *dev);
+
+/*
+ * Accessors to resources & interrupts and other device
+ * fields
+ */
+
+static inline int macio_resource_count(struct macio_dev *dev)
+{
+ return dev->n_resources;
+}
+
+static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no)
+{
+ return dev->resource[resource_no].start;
+}
+
+static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no)
+{
+ return dev->resource[resource_no].end;
+}
+
+static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no)
+{
+ struct resource *res = &dev->resource[resource_no];
+ if (res->start == 0 || res->end == 0 || res->end < res->start)
+ return 0;
+ return res->end - res->start + 1;
+}
+
+extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
+extern void macio_release_resource(struct macio_dev *dev, int resource_no);
+extern int macio_request_resources(struct macio_dev *dev, const char *name);
+extern void macio_release_resources(struct macio_dev *dev);
+
+static inline int macio_irq_count(struct macio_dev *dev)
+{
+ return dev->n_interrupts;
+}
+
+static inline int macio_irq(struct macio_dev *dev, int irq_no)
+{
+ return dev->interrupt[irq_no].start;
+}
+
+static inline void macio_set_drvdata(struct macio_dev *dev, void *data)
+{
+ dev_set_drvdata(&dev->ofdev.dev, data);
+}
+
+static inline void* macio_get_drvdata(struct macio_dev *dev)
+{
+ return dev_get_drvdata(&dev->ofdev.dev);
+}
+
+static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
+{
+ return mdev->ofdev.node;
+}
+
+#ifdef CONFIG_PCI
+static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
+{
+ return mdev->bus->pdev;
+}
+#endif
+
+/*
+ * A driver for a mac-io chip based device
+ */
+struct macio_driver
+{
+ char *name;
+ struct of_match *match_table;
+ struct module *owner;
+
+ int (*probe)(struct macio_dev* dev, const struct of_match *match);
+ int (*remove)(struct macio_dev* dev);
+
+ int (*suspend)(struct macio_dev* dev, u32 state);
+ int (*resume)(struct macio_dev* dev);
+ int (*shutdown)(struct macio_dev* dev);
+
+ struct device_driver driver;
+};
+#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
+
+extern int macio_register_driver(struct macio_driver *);
+extern void macio_unregister_driver(struct macio_driver *);
+
+#endif /* __MACIO_ASIC_H__ */
diff --git a/include/asm-ppc/mc146818rtc.h b/include/asm-ppc/mc146818rtc.h
new file mode 100644
index 0000000..227018b
--- /dev/null
+++ b/include/asm-ppc/mc146818rtc.h
@@ -0,0 +1,31 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_MC146818RTC_H
+#define __ASM_PPC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_PPC_MC146818RTC_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/md.h b/include/asm-ppc/md.h
new file mode 100644
index 0000000..9a9b6b4
--- /dev/null
+++ b/include/asm-ppc/md.h
@@ -0,0 +1,15 @@
+/*
+ * md.h: High speed xor_block operation for RAID4/5
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MD_H
+#define __ASM_MD_H
+
+/* #define HAVE_ARCH_XORBLOCK */
+
+#define MD_XORBLOCK_ALIGNMENT sizeof(long)
+
+#endif /* __ASM_MD_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mediabay.h b/include/asm-ppc/mediabay.h
new file mode 100644
index 0000000..9daa325
--- /dev/null
+++ b/include/asm-ppc/mediabay.h
@@ -0,0 +1,31 @@
+/*
+ * mediabay.h: definitions for using the media bay
+ * on PowerBook 3400 and similar computers.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+#ifndef _PPC_MEDIABAY_H
+#define _PPC_MEDIABAY_H
+
+#ifdef __KERNEL__
+
+#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */
+#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */
+#define MB_SOUND 2 /* sound device ? */
+#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */
+#define MB_PCI 5 /* media bay contains a PCI device */
+#define MB_POWER 6 /* media bay contains a Power device (???) */
+#define MB_NO 7 /* media bay contains nothing */
+
+int check_media_bay(struct device_node *which_bay, int what);
+int check_media_bay_by_base(unsigned long base, int what);
+
+/* Number of bays in the machine or 0 */
+extern int media_bay_count;
+
+/* called by pmac-ide.c to register IDE controller for media bay */
+extern int media_bay_set_ide_infos(struct device_node* which_bay,
+ unsigned long base, int irq, int index);
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_MEDIABAY_H */
diff --git a/include/asm-ppc/mk48t59.h b/include/asm-ppc/mk48t59.h
new file mode 100644
index 0000000..6a0ed6f
--- /dev/null
+++ b/include/asm-ppc/mk48t59.h
@@ -0,0 +1,27 @@
+/*
+ * Registers for the mk48t59 real-time-clock
+ */
+
+#ifndef _PPC_MK48T59_H
+#define _PPC_MK48T59_H
+
+/* RTC Offsets */
+
+#define MK48T59_RTC_SECONDS 0x1FF9
+#define MK48T59_RTC_MINUTES 0x1FFA
+#define MK48T59_RTC_HOURS 0x1FFB
+#define MK48T59_RTC_DAY_OF_WEEK 0x1FFC
+#define MK48T59_RTC_DAY_OF_MONTH 0x1FFD
+#define MK48T59_RTC_MONTH 0x1FFE
+#define MK48T59_RTC_YEAR 0x1FFF
+
+#define MK48T59_RTC_CONTROLA 0x1FF8
+#define MK48T59_RTC_CA_WRITE 0x80
+#define MK48T59_RTC_CA_READ 0x40
+#define MK48T59_RTC_CA_CALIB_SIGN 0x20
+#define MK48T59_RTC_CA_CALIB_MASK 0x1f
+
+#define MK48T59_RTC_CONTROLB 0x1FF9
+#define MK48T59_RTC_CB_STOP 0x80
+
+#endif /* _PPC_MK48T59_H */
diff --git a/include/asm-ppc/mman.h b/include/asm-ppc/mman.h
new file mode 100644
index 0000000..5fd19fd
--- /dev/null
+++ b/include/asm-ppc/mman.h
@@ -0,0 +1,44 @@
+#ifndef __PPC_MMAN_H__
+#define __PPC_MMAN_H__
+
+#define PROT_READ 0x1 /* page can be read */
+#define PROT_WRITE 0x2 /* page can be written */
+#define PROT_EXEC 0x4 /* page can be executed */
+#define PROT_SEM 0x8 /* page may be used for atomic ops */
+#define PROT_NONE 0x0 /* page can not be accessed */
+#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED 0x01 /* Share changes */
+#define MAP_PRIVATE 0x02 /* Changes are private */
+#define MAP_TYPE 0x0f /* Mask for type of mapping */
+#define MAP_FIXED 0x10 /* Interpret addr exactly */
+#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */
+#define MAP_NORESERVE 0x40 /* don't reserve swap pages */
+#define MAP_LOCKED 0x80
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MS_ASYNC 1 /* sync memory asynchronously */
+#define MS_INVALIDATE 2 /* invalidate the caches */
+#define MS_SYNC 4 /* synchronous memory sync */
+
+#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */
+#define MCL_FUTURE 0x4000 /* lock all additions to address space */
+
+#define MADV_NORMAL 0x0 /* default page-in behavior */
+#define MADV_RANDOM 0x1 /* page-in minimum required */
+#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
+#define MADV_WILLNEED 0x3 /* pre-fault pages */
+#define MADV_DONTNEED 0x4 /* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON MAP_ANONYMOUS
+#define MAP_FILE 0
+
+#endif /* __PPC_MMAN_H__ */
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
new file mode 100644
index 0000000..4a0c67f
--- /dev/null
+++ b/include/asm-ppc/mmu.h
@@ -0,0 +1,454 @@
+/*
+ * PowerPC memory management structures
+ */
+
+#ifdef __KERNEL__
+#ifndef _PPC_MMU_H_
+#define _PPC_MMU_H_
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Define physical address type. Machines using split size
+ * virtual/physical addressing like 32-bit virtual / 36-bit
+ * physical need a larger than native word size type. -Matt
+ */
+#ifndef CONFIG_PTE_64BIT
+typedef unsigned long phys_addr_t;
+#else
+typedef unsigned long long phys_addr_t;
+extern phys_addr_t fixup_bigphys_addr(phys_addr_t, phys_addr_t);
+#endif
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+#ifdef CONFIG_PPC64BRIDGE
+ unsigned long long vsid:52;
+ unsigned long api:5;
+ unsigned long :5;
+ unsigned long h:1;
+ unsigned long v:1;
+ unsigned long long rpn:52;
+#else /* CONFIG_PPC64BRIDGE */
+ unsigned long v:1; /* Entry is valid */
+ unsigned long vsid:24; /* Virtual segment identifier */
+ unsigned long h:1; /* Hash algorithm indicator */
+ unsigned long api:6; /* Abbreviated page index */
+ unsigned long rpn:20; /* Real (physical) page number */
+#endif /* CONFIG_PPC64BRIDGE */
+ unsigned long :3; /* Unused */
+ unsigned long r:1; /* Referenced */
+ unsigned long c:1; /* Changed */
+ unsigned long w:1; /* Write-thru cache mode */
+ unsigned long i:1; /* Cache inhibited */
+ unsigned long m:1; /* Memory coherence */
+ unsigned long g:1; /* Guarded */
+ unsigned long :1; /* Unused */
+ unsigned long pp:2; /* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#define PP_RWXX 0 /* Supervisor read/write, User none */
+#define PP_RWRX 1 /* Supervisor read/write, User read */
+#define PP_RWRW 2 /* Supervisor read/write, User read/write */
+#define PP_RXRX 3 /* Supervisor read, User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+ unsigned long t:1; /* Normal or I/O type */
+ unsigned long ks:1; /* Supervisor 'key' (normally 0) */
+ unsigned long kp:1; /* User 'key' (normally 1) */
+ unsigned long n:1; /* No-execute */
+ unsigned long :4; /* Unused */
+ unsigned long vsid:24; /* Virtual Segment Identifier */
+} SEGREG;
+
+/* Block Address Translation (BAT) Registers */
+typedef struct _P601_BATU { /* Upper part of BAT for 601 processor */
+ unsigned long bepi:15; /* Effective page index (virtual address) */
+ unsigned long :8; /* unused */
+ unsigned long w:1;
+ unsigned long i:1; /* Cache inhibit */
+ unsigned long m:1; /* Memory coherence */
+ unsigned long ks:1; /* Supervisor key (normally 0) */
+ unsigned long kp:1; /* User key (normally 1) */
+ unsigned long pp:2; /* Page access protections */
+} P601_BATU;
+
+typedef struct _BATU { /* Upper part of BAT (all except 601) */
+#ifdef CONFIG_PPC64BRIDGE
+ unsigned long long bepi:47;
+#else /* CONFIG_PPC64BRIDGE */
+ unsigned long bepi:15; /* Effective page index (virtual address) */
+#endif /* CONFIG_PPC64BRIDGE */
+ unsigned long :4; /* Unused */
+ unsigned long bl:11; /* Block size mask */
+ unsigned long vs:1; /* Supervisor valid */
+ unsigned long vp:1; /* User valid */
+} BATU;
+
+typedef struct _P601_BATL { /* Lower part of BAT for 601 processor */
+ unsigned long brpn:15; /* Real page index (physical address) */
+ unsigned long :10; /* Unused */
+ unsigned long v:1; /* Valid bit */
+ unsigned long bl:6; /* Block size mask */
+} P601_BATL;
+
+typedef struct _BATL { /* Lower part of BAT (all except 601) */
+#ifdef CONFIG_PPC64BRIDGE
+ unsigned long long brpn:47;
+#else /* CONFIG_PPC64BRIDGE */
+ unsigned long brpn:15; /* Real page index (physical address) */
+#endif /* CONFIG_PPC64BRIDGE */
+ unsigned long :10; /* Unused */
+ unsigned long w:1; /* Write-thru cache */
+ unsigned long i:1; /* Cache inhibit */
+ unsigned long m:1; /* Memory coherence */
+ unsigned long g:1; /* Guarded (MBZ in IBAT) */
+ unsigned long :1; /* Unused */
+ unsigned long pp:2; /* Page access protections */
+} BATL;
+
+typedef struct _BAT {
+ BATU batu; /* Upper register */
+ BATL batl; /* Lower register */
+} BAT;
+
+typedef struct _P601_BAT {
+ P601_BATU batu; /* Upper register */
+ P601_BATL batl; /* Lower register */
+} P601_BAT;
+
+#endif /* __ASSEMBLY__ */
+
+/* Block size masks */
+#define BL_128K 0x000
+#define BL_256K 0x001
+#define BL_512K 0x003
+#define BL_1M 0x007
+#define BL_2M 0x00F
+#define BL_4M 0x01F
+#define BL_8M 0x03F
+#define BL_16M 0x07F
+#define BL_32M 0x0FF
+#define BL_64M 0x1FF
+#define BL_128M 0x3FF
+#define BL_256M 0x7FF
+
+/* BAT Access Protection */
+#define BPP_XX 0x00 /* No access */
+#define BPP_RX 0x01 /* Read only */
+#define BPP_RW 0x02 /* Read/write */
+
+/* Control/status registers for the MPC8xx.
+ * A write operation to these registers causes serialized access.
+ * During software tablewalk, the registers used perform mask/shift-add
+ * operations when written/read. A TLB entry is created when the Mx_RPN
+ * is written, and the contents of several registers are used to
+ * create the entry.
+ */
+#define SPRN_MI_CTR 784 /* Instruction TLB control register */
+#define MI_GPM 0x80000000 /* Set domain manager mode */
+#define MI_PPM 0x40000000 /* Set subpage protection */
+#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
+#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */
+#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
+#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */
+#define MI_RESETVAL 0x00000000 /* Value of register at reset */
+
+/* These are the Ks and Kp from the PowerPC books. For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MI_AP 786
+#define MI_Ks 0x80000000 /* Should not be set */
+#define MI_Kp 0x40000000 /* Should always be set */
+
+/* The effective page number register. When read, contains the information
+ * about the last instruction TLB miss. When MI_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MI_EPN 787
+#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */
+#define MI_EVALID 0x00000200 /* Entry is valid */
+#define MI_ASIDMASK 0x0000000f /* ASID match value */
+ /* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the instruction TLB, it contains bits that get loaded into the
+ * TLB entry when the MI_RPN is written.
+ */
+#define SPRN_MI_TWC 789
+#define MI_APG 0x000001e0 /* Access protection group (0) */
+#define MI_GUARDED 0x00000010 /* Guarded storage */
+#define MI_PSMASK 0x0000000c /* Mask of page size bits */
+#define MI_PS8MEG 0x0000000c /* 8M page size */
+#define MI_PS512K 0x00000004 /* 512K page size */
+#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */
+#define MI_SVALID 0x00000001 /* Segment entry is valid */
+ /* Reset value is undefined */
+
+/* Real page number. Defined by the pte. Writing this register
+ * causes a TLB entry to be created for the instruction TLB, using
+ * additional information from the MI_EPN, and MI_TWC registers.
+ */
+#define SPRN_MI_RPN 790
+
+/* Define an RPN value for mapping kernel memory to large virtual
+ * pages for boot initialization. This has real page number of 0,
+ * large page size, shared page, cache enabled, and valid.
+ * Also mark all subpages valid and write access.
+ */
+#define MI_BOOTINIT 0x000001fd
+
+#define SPRN_MD_CTR 792 /* Data TLB control register */
+#define MD_GPM 0x80000000 /* Set domain manager mode */
+#define MD_PPM 0x40000000 /* Set subpage protection */
+#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
+#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */
+#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */
+#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */
+#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
+#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */
+#define MD_RESETVAL 0x04000000 /* Value of register at reset */
+
+#define SPRN_M_CASID 793 /* Address space ID (context) to match */
+#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */
+
+
+/* These are the Ks and Kp from the PowerPC books. For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MD_AP 794
+#define MD_Ks 0x80000000 /* Should not be set */
+#define MD_Kp 0x40000000 /* Should always be set */
+
+/* The effective page number register. When read, contains the information
+ * about the last instruction TLB miss. When MD_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MD_EPN 795
+#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */
+#define MD_EVALID 0x00000200 /* Entry is valid */
+#define MD_ASIDMASK 0x0000000f /* ASID match value */
+ /* Reset value is undefined */
+
+/* The pointer to the base address of the first level page table.
+ * During a software tablewalk, reading this register provides the address
+ * of the entry associated with MD_EPN.
+ */
+#define SPRN_M_TWB 796
+#define M_L1TB 0xfffff000 /* Level 1 table base address */
+#define M_L1INDX 0x00000ffc /* Level 1 index, when read */
+ /* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the data TLB, it contains bits that get loaded into the TLB entry
+ * when the MD_RPN is written. It is also provides the hardware assist
+ * for finding the PTE address during software tablewalk.
+ */
+#define SPRN_MD_TWC 797
+#define MD_L2TB 0xfffff000 /* Level 2 table base address */
+#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */
+#define MD_APG 0x000001e0 /* Access protection group (0) */
+#define MD_GUARDED 0x00000010 /* Guarded storage */
+#define MD_PSMASK 0x0000000c /* Mask of page size bits */
+#define MD_PS8MEG 0x0000000c /* 8M page size */
+#define MD_PS512K 0x00000004 /* 512K page size */
+#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */
+#define MD_WT 0x00000002 /* Use writethrough page attribute */
+#define MD_SVALID 0x00000001 /* Segment entry is valid */
+ /* Reset value is undefined */
+
+
+/* Real page number. Defined by the pte. Writing this register
+ * causes a TLB entry to be created for the data TLB, using
+ * additional information from the MD_EPN, and MD_TWC registers.
+ */
+#define SPRN_MD_RPN 798
+
+/* This is a temporary storage register that could be used to save
+ * a processor working register during a tablewalk.
+ */
+#define SPRN_M_TW 799
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully- associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively.
+ */
+
+#define PPC4XX_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion. On all architectures, the data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
+ * instructions.
+ */
+
+#define TLB_LO 1
+#define TLB_HI 0
+
+#define TLB_DATA TLB_LO
+#define TLB_TAG TLB_HI
+
+/* Tag portion */
+
+#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */
+#define TLB_PAGESZ_MASK 0x00000380
+#define TLB_PAGESZ(x) (((x) & 0x7) << 7)
+#define PAGESZ_1K 0
+#define PAGESZ_4K 1
+#define PAGESZ_16K 2
+#define PAGESZ_64K 3
+#define PAGESZ_256K 4
+#define PAGESZ_1M 5
+#define PAGESZ_4M 6
+#define PAGESZ_16M 7
+#define TLB_VALID 0x00000040 /* Entry is valid */
+
+/* Data portion */
+
+#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */
+#define TLB_PERM_MASK 0x00000300
+#define TLB_EX 0x00000200 /* Instruction execution allowed */
+#define TLB_WR 0x00000100 /* Writes permitted */
+#define TLB_ZSEL_MASK 0x000000F0
+#define TLB_ZSEL(x) (((x) & 0xF) << 4)
+#define TLB_ATTR_MASK 0x0000000F
+#define TLB_W 0x00000008 /* Caching is write-through */
+#define TLB_I 0x00000004 /* Caching is inhibited */
+#define TLB_M 0x00000002 /* Memory is coherent */
+#define TLB_G 0x00000001 /* Memory is guarded from prefetch */
+
+/*
+ * PPC440 support
+ */
+#define PPC44x_MMUCR_TID 0x000000ff
+#define PPC44x_MMUCR_STS 0x00010000
+
+#define PPC44x_TLB_PAGEID 0
+#define PPC44x_TLB_XLAT 1
+#define PPC44x_TLB_ATTRIB 2
+
+/* Page identification fields */
+#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */
+#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */
+#define PPC44x_TLB_TS 0x00000100 /* Translation address space */
+#define PPC44x_TLB_1K 0x00000000 /* Page sizes */
+#define PPC44x_TLB_4K 0x00000010
+#define PPC44x_TLB_16K 0x00000020
+#define PPC44x_TLB_64K 0x00000030
+#define PPC44x_TLB_256K 0x00000040
+#define PPC44x_TLB_1M 0x00000050
+#define PPC44x_TLB_16M 0x00000070
+#define PPC44x_TLB_256M 0x00000090
+
+/* Translation fields */
+#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */
+#define PPC44x_TLB_ERPN_MASK 0x0000000f
+
+/* Storage attribute and access control fields */
+#define PPC44x_TLB_ATTR_MASK 0x0000ff80
+#define PPC44x_TLB_U0 0x00008000 /* User 0 */
+#define PPC44x_TLB_U1 0x00004000 /* User 1 */
+#define PPC44x_TLB_U2 0x00002000 /* User 2 */
+#define PPC44x_TLB_U3 0x00001000 /* User 3 */
+#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */
+#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */
+#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */
+#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */
+#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */
+
+#define PPC44x_TLB_PERM_MASK 0x0000003f
+#define PPC44x_TLB_UX 0x00000020 /* User execution */
+#define PPC44x_TLB_UW 0x00000010 /* User write */
+#define PPC44x_TLB_UR 0x00000008 /* User read */
+#define PPC44x_TLB_SX 0x00000004 /* Super execution */
+#define PPC44x_TLB_SW 0x00000002 /* Super write */
+#define PPC44x_TLB_SR 0x00000001 /* Super read */
+
+/* Book-E defined page sizes */
+#define BOOKE_PAGESZ_1K 0
+#define BOOKE_PAGESZ_4K 1
+#define BOOKE_PAGESZ_16K 2
+#define BOOKE_PAGESZ_64K 3
+#define BOOKE_PAGESZ_256K 4
+#define BOOKE_PAGESZ_1M 5
+#define BOOKE_PAGESZ_4M 6
+#define BOOKE_PAGESZ_16M 7
+#define BOOKE_PAGESZ_64M 8
+#define BOOKE_PAGESZ_256M 9
+#define BOOKE_PAGESZ_1GB 10
+#define BOOKE_PAGESZ_4GB 11
+#define BOOKE_PAGESZ_16GB 12
+#define BOOKE_PAGESZ_64GB 13
+#define BOOKE_PAGESZ_256GB 14
+#define BOOKE_PAGESZ_1TB 15
+
+/*
+ * Freescale Book-E MMU support
+ */
+
+#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000)
+#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
+#define MAS0_NV 0x00000FFF
+
+#define MAS1_VALID 0x80000000
+#define MAS1_IPROT 0x40000000
+#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
+#define MAS1_TS 0x00001000
+#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00)
+
+#define MAS2_EPN 0xFFFFF000
+#define MAS2_X0 0x00000040
+#define MAS2_X1 0x00000020
+#define MAS2_W 0x00000010
+#define MAS2_I 0x00000008
+#define MAS2_M 0x00000004
+#define MAS2_G 0x00000002
+#define MAS2_E 0x00000001
+
+#define MAS3_RPN 0xFFFFF000
+#define MAS3_U0 0x00000200
+#define MAS3_U1 0x00000100
+#define MAS3_U2 0x00000080
+#define MAS3_U3 0x00000040
+#define MAS3_UX 0x00000020
+#define MAS3_SX 0x00000010
+#define MAS3_UW 0x00000008
+#define MAS3_SW 0x00000004
+#define MAS3_UR 0x00000002
+#define MAS3_SR 0x00000001
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_TIDDSEL 0x000F0000
+#define MAS4_TSIZED(x) MAS1_TSIZE(x)
+#define MAS4_X0D 0x00000040
+#define MAS4_X1D 0x00000020
+#define MAS4_WD 0x00000010
+#define MAS4_ID 0x00000008
+#define MAS4_MD 0x00000004
+#define MAS4_GD 0x00000002
+#define MAS4_ED 0x00000001
+
+#define MAS6_SPID0 0x3FFF0000
+#define MAS6_SPID1 0x00007FFE
+#define MAS6_SAS 0x00000001
+#define MAS6_SPID MAS6_SPID0
+
+#define MAS7_RPN 0xFFFFFFFF
+
+#endif /* _PPC_MMU_H_ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mmu_context.h b/include/asm-ppc/mmu_context.h
new file mode 100644
index 0000000..9222fa6
--- /dev/null
+++ b/include/asm-ppc/mmu_context.h
@@ -0,0 +1,197 @@
+#ifdef __KERNEL__
+#ifndef __PPC_MMU_CONTEXT_H
+#define __PPC_MMU_CONTEXT_H
+
+#include <linux/config.h>
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/mmu.h>
+#include <asm/cputable.h>
+
+/*
+ * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
+ * (virtual segment identifiers) for each context. Although the
+ * hardware supports 24-bit VSIDs, and thus >1 million contexts,
+ * we only use 32,768 of them. That is ample, since there can be
+ * at most around 30,000 tasks in the system anyway, and it means
+ * that we can use a bitmap to indicate which contexts are in use.
+ * Using a bitmap means that we entirely avoid all of the problems
+ * that we used to have when the context number overflowed,
+ * particularly on SMP systems.
+ * -- paulus.
+ */
+
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs). We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table. Note, if this
+ * function is changed then arch/ppc/mm/hashtable.S will have to be
+ * changed to correspond.
+ */
+#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+ & 0xffffff)
+
+/*
+ The MPC8xx has only 16 contexts. We rotate through them on each
+ task switch. A better way would be to keep track of tasks that
+ own contexts, and implement an LRU usage. That way very active
+ tasks don't always have to pay the TLB reload overhead. The
+ kernel pages are mapped shared, so the kernel can run on behalf
+ of any task that makes a kernel entry. Shared does not mean they
+ are not protected, just that the ASID comparison is not performed.
+ -- Dan
+
+ The IBM4xx has 256 contexts, so we can just rotate through these
+ as a way of "switching" contexts. If the TID of the TLB is zero,
+ the PID/TID comparison is disabled, so we can use a TID of zero
+ to represent all kernel pages as shared among all contexts.
+ -- Dan
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_8xx
+#define NO_CONTEXT 16
+#define LAST_CONTEXT 15
+#define FIRST_CONTEXT 0
+
+#elif defined(CONFIG_4xx)
+#define NO_CONTEXT 256
+#define LAST_CONTEXT 255
+#define FIRST_CONTEXT 1
+
+#elif defined(CONFIG_E500)
+#define NO_CONTEXT 256
+#define LAST_CONTEXT 255
+#define FIRST_CONTEXT 1
+
+#else
+
+/* PPC 6xx, 7xx CPUs */
+#define NO_CONTEXT ((mm_context_t) -1)
+#define LAST_CONTEXT 32767
+#define FIRST_CONTEXT 1
+#endif
+
+/*
+ * Set the current MMU context.
+ * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
+ * loading up the segment registers for the user part of the address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(mm_context_t context, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern mm_context_t next_mmu_context;
+
+/*
+ * If we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+#if LAST_CONTEXT < 30000
+#define FEW_CONTEXTS 1
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+#endif
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+ mm_context_t ctx;
+
+ if (mm->context != NO_CONTEXT)
+ return;
+#ifdef FEW_CONTEXTS
+ while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+ steal_context();
+#endif
+ ctx = next_mmu_context;
+ while (test_and_set_bit(ctx, context_map)) {
+ ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+ if (ctx > LAST_CONTEXT)
+ ctx = 0;
+ }
+ next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+ mm->context = ctx;
+#ifdef FEW_CONTEXTS
+ context_mm[ctx] = mm;
+#endif
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+#define init_new_context(tsk,mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+ if (mm->context != NO_CONTEXT) {
+ clear_bit(mm->context, context_map);
+ mm->context = NO_CONTEXT;
+#ifdef FEW_CONTEXTS
+ atomic_inc(&nr_free_contexts);
+#endif
+ }
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+#ifdef CONFIG_ALTIVEC
+ asm volatile (
+ BEGIN_FTR_SECTION
+ "dssall;\n"
+#ifndef CONFIG_POWER4
+ "sync;\n" /* G4 needs a sync here, G5 apparently not */
+#endif
+ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ : : );
+#endif /* CONFIG_ALTIVEC */
+
+ tsk->thread.pgdir = next->pgd;
+
+ /* No need to flush userspace segments if the mm doesnt change */
+ if (prev == next)
+ return;
+
+ /* Setup new userspace context */
+ get_mmu_context(next);
+ set_context(next->context, next->pgd);
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current)
+
+extern void mmu_context_init(void);
+
+#endif /* __PPC_MMU_CONTEXT_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/module.h b/include/asm-ppc/module.h
new file mode 100644
index 0000000..fb63492
--- /dev/null
+++ b/include/asm-ppc/module.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_PPC_MODULE_H
+#define _ASM_PPC_MODULE_H
+/* Module stuff for PPC. (C) 2001 Rusty Russell */
+
+#include <linux/list.h>
+#include <asm/bug.h>
+
+/* Thanks to Paul M for explaining this.
+
+ PPC can only do rel jumps += 32MB, and often the kernel and other
+ modules are furthur away than this. So, we jump to a table of
+ trampolines attached to the module (the Procedure Linkage Table)
+ whenever that happens.
+*/
+
+struct ppc_plt_entry
+{
+ /* 16 byte jump instruction sequence (4 instructions) */
+ unsigned int jump[4];
+};
+
+struct mod_arch_specific
+{
+ /* Indices of PLT sections within module. */
+ unsigned int core_plt_section, init_plt_section;
+
+ /* List of BUG addresses, source line numbers and filenames */
+ struct list_head bug_list;
+ struct bug_entry *bug_table;
+ unsigned int num_bugs;
+};
+
+extern struct bug_entry *module_find_bug(unsigned long bugaddr);
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+/* Make empty sections for module_frob_arch_sections to expand. */
+#ifdef MODULE
+asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
+asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
+#endif
+#endif /* _ASM_PPC_MODULE_H */
diff --git a/include/asm-ppc/mpc10x.h b/include/asm-ppc/mpc10x.h
new file mode 100644
index 0000000..d8e7e2d
--- /dev/null
+++ b/include/asm-ppc/mpc10x.h
@@ -0,0 +1,174 @@
+/*
+ * arch/ppc/kernel/mpc10x.h
+ *
+ * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
+ * ctlr/EPIC/etc.
+ *
+ * Author: Mark A. Greer
+ * mgreer@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PPC_KERNEL_MPC10X_H
+#define __PPC_KERNEL_MPC10X_H
+
+#include <linux/pci_ids.h>
+#include <asm/pci-bridge.h>
+
+/*
+ * The values here don't completely map everything but should work in most
+ * cases.
+ *
+ * MAP A (PReP Map)
+ * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
+ * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
+ * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000
+ * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
+ *
+ * MAP B (CHRP Map)
+ * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
+ * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
+ * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000
+ * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
+ */
+
+/*
+ * Define the vendor/device IDs for the various bridges--should be added to
+ * <linux/pci_ids.h>
+ */
+#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \
+ PCI_VENDOR_ID_MOTOROLA)
+#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
+
+/* Define the type of map to use */
+#define MPC10X_MEM_MAP_A 1
+#define MPC10X_MEM_MAP_B 2
+
+/* Map A (PReP Map) Defines */
+#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8
+#define MPC10X_MAPA_CNFG_DATA 0x80000cfc
+
+#define MPC10X_MAPA_ISA_IO_BASE 0x80000000
+#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000
+#define MPC10X_MAPA_DRAM_OFFSET 0x80000000
+
+#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0
+#define MPC10X_MAPA_PCI_IO_START 0x00000000
+#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1)
+#define MPC10X_MAPA_PCI_MEM_START 0x00000000
+#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1)
+
+#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \
+ MPC10X_MAPA_PCI_MEM_START)
+
+/* Map B (CHRP Map) Defines */
+#define MPC10X_MAPB_CNFG_ADDR 0xfec00000
+#define MPC10X_MAPB_CNFG_DATA 0xfee00000
+
+#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000
+#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000
+#define MPC10X_MAPB_DRAM_OFFSET 0x00000000
+
+#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000
+#define MPC10X_MAPB_PCI_IO_START 0x00000000
+#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1)
+#define MPC10X_MAPB_PCI_MEM_START 0x80000000
+#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1)
+
+#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \
+ MPC10X_MAPB_PCI_MEM_START)
+
+/* Set hose members to values appropriate for the mem map used */
+#define MPC10X_SETUP_HOSE(hose, map) { \
+ (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \
+ (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \
+ (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \
+ (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \
+ (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \
+ (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \
+}
+
+
+/* Miscellaneous Configuration register offsets */
+#define MPC10X_CFG_PIR_REG 0x09
+#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00
+#define MPC10X_CFG_PIR_AGENT 0x01
+
+#define MPC10X_CFG_EUMBBAR 0x78
+
+#define MPC10X_CFG_PICR1_REG 0xa8
+#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000
+#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000
+#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000
+#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004
+#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040
+
+#define MPC10X_CFG_PICR2_REG 0xac
+#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001
+
+#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0
+#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */
+#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */
+#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */
+#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */
+#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */
+
+/* Define offsets for the memory controller registers in the config space */
+#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0
+
+/* Define some offset in the EUMB */
+#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */
+
+#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */
+#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */
+#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */
+#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */
+#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */
+#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */
+#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */
+#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */
+#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */
+#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */
+#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */
+#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */
+#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */
+#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */
+#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */
+#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */
+
+/*
+ * Define some recommended places to put the EUMB regs.
+ * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
+ */
+extern unsigned long ioremap_base;
+#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE)
+#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE
+
+
+int mpc10x_bridge_init(struct pci_controller *hose,
+ uint current_map,
+ uint new_map,
+ uint phys_eumb_base);
+unsigned long mpc10x_get_mem_size(uint mem_map);
+int mpc10x_enable_store_gathering(struct pci_controller *hose);
+int mpc10x_disable_store_gathering(struct pci_controller *hose);
+
+/* For MPC107 boards that use the built-in openpic */
+void mpc10x_set_openpic(void);
+
+#endif /* __PPC_KERNEL_MPC10X_H */
diff --git a/include/asm-ppc/mpc52xx.h b/include/asm-ppc/mpc52xx.h
new file mode 100644
index 0000000..e5f80c2
--- /dev/null
+++ b/include/asm-ppc/mpc52xx.h
@@ -0,0 +1,445 @@
+/*
+ * include/asm-ppc/mpc52xx.h
+ *
+ * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
+ * May need to be cleaned as the port goes on ...
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Originally written by Dale Farnsworth <dfarnsworth@mvista.com>
+ * for the 2.4 kernel.
+ *
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_MPC52xx_H__
+#define __ASM_MPC52xx_H__
+
+#ifndef __ASSEMBLY__
+#include <asm/ppcboot.h>
+#include <asm/types.h>
+
+struct pt_regs;
+#endif /* __ASSEMBLY__ */
+
+
+/* ======================================================================== */
+/* PPC Sys devices definition */
+/* ======================================================================== */
+
+enum ppc_sys_devices {
+ MPC52xx_MSCAN1,
+ MPC52xx_MSCAN2,
+ MPC52xx_SPI,
+ MPC52xx_USB,
+ MPC52xx_BDLC,
+ MPC52xx_PSC1,
+ MPC52xx_PSC2,
+ MPC52xx_PSC3,
+ MPC52xx_PSC4,
+ MPC52xx_PSC5,
+ MPC52xx_PSC6,
+ MPC52xx_FEC,
+ MPC52xx_ATA,
+ MPC52xx_I2C1,
+ MPC52xx_I2C2,
+};
+
+
+/* ======================================================================== */
+/* Main registers/struct addresses */
+/* ======================================================================== */
+
+/* MBAR position */
+#define MPC52xx_MBAR 0xf0000000 /* Phys address */
+#define MPC52xx_MBAR_VIRT 0xf0000000 /* Virt address */
+#define MPC52xx_MBAR_SIZE 0x00010000
+
+#define MPC52xx_PA(x) ((phys_addr_t)(MPC52xx_MBAR + (x)))
+#define MPC52xx_VA(x) ((void __iomem *)(MPC52xx_MBAR_VIRT + (x)))
+
+/* Registers zone offset/size */
+#define MPC52xx_MMAP_CTL_OFFSET 0x0000
+#define MPC52xx_MMAP_CTL_SIZE 0x068
+#define MPC52xx_SDRAM_OFFSET 0x0100
+#define MPC52xx_SDRAM_SIZE 0x010
+#define MPC52xx_CDM_OFFSET 0x0200
+#define MPC52xx_CDM_SIZE 0x038
+#define MPC52xx_INTR_OFFSET 0x0500
+#define MPC52xx_INTR_SIZE 0x04c
+#define MPC52xx_GPTx_OFFSET(x) (0x0600 + ((x)<<4))
+#define MPC52xx_GPT_SIZE 0x010
+#define MPC52xx_RTC_OFFSET 0x0800
+#define MPC52xx_RTC_SIZE 0x024
+#define MPC52xx_GPIO_OFFSET 0x0b00
+#define MPC52xx_GPIO_SIZE 0x040
+#define MPC52xx_GPIO_WKUP_OFFSET 0x0c00
+#define MPC52xx_GPIO_WKUP_SIZE 0x028
+#define MPC52xx_PCI_OFFSET 0x0d00
+#define MPC52xx_PCI_SIZE 0x100
+#define MPC52xx_SDMA_OFFSET 0x1200
+#define MPC52xx_SDMA_SIZE 0x100
+#define MPC52xx_XLB_OFFSET 0x1f00
+#define MPC52xx_XLB_SIZE 0x100
+#define MPC52xx_PSCx_OFFSET(x) (((x)!=6)?(0x1e00+((x)<<9)):0x2c00)
+#define MPC52xx_PSC_SIZE 0x0a0
+
+/* SRAM used for SDMA */
+#define MPC52xx_SRAM_OFFSET 0x8000
+#define MPC52xx_SRAM_SIZE 0x4000
+
+
+/* ======================================================================== */
+/* IRQ mapping */
+/* ======================================================================== */
+/* Be sure to look at mpc52xx_pic.h if you wish for whatever reason to change
+ * this
+ */
+
+#define MPC52xx_CRIT_IRQ_NUM 4
+#define MPC52xx_MAIN_IRQ_NUM 17
+#define MPC52xx_SDMA_IRQ_NUM 17
+#define MPC52xx_PERP_IRQ_NUM 23
+
+#define MPC52xx_CRIT_IRQ_BASE 0
+#define MPC52xx_MAIN_IRQ_BASE (MPC52xx_CRIT_IRQ_BASE + MPC52xx_CRIT_IRQ_NUM)
+#define MPC52xx_SDMA_IRQ_BASE (MPC52xx_MAIN_IRQ_BASE + MPC52xx_MAIN_IRQ_NUM)
+#define MPC52xx_PERP_IRQ_BASE (MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM)
+
+#define MPC52xx_IRQ0 (MPC52xx_CRIT_IRQ_BASE + 0)
+#define MPC52xx_SLICE_TIMER_0_IRQ (MPC52xx_CRIT_IRQ_BASE + 1)
+#define MPC52xx_HI_INT_IRQ (MPC52xx_CRIT_IRQ_BASE + 2)
+#define MPC52xx_CCS_IRQ (MPC52xx_CRIT_IRQ_BASE + 3)
+
+#define MPC52xx_IRQ1 (MPC52xx_MAIN_IRQ_BASE + 1)
+#define MPC52xx_IRQ2 (MPC52xx_MAIN_IRQ_BASE + 2)
+#define MPC52xx_IRQ3 (MPC52xx_MAIN_IRQ_BASE + 3)
+
+#define MPC52xx_SDMA_IRQ (MPC52xx_PERP_IRQ_BASE + 0)
+#define MPC52xx_PSC1_IRQ (MPC52xx_PERP_IRQ_BASE + 1)
+#define MPC52xx_PSC2_IRQ (MPC52xx_PERP_IRQ_BASE + 2)
+#define MPC52xx_PSC3_IRQ (MPC52xx_PERP_IRQ_BASE + 3)
+#define MPC52xx_PSC6_IRQ (MPC52xx_PERP_IRQ_BASE + 4)
+#define MPC52xx_IRDA_IRQ (MPC52xx_PERP_IRQ_BASE + 4)
+#define MPC52xx_FEC_IRQ (MPC52xx_PERP_IRQ_BASE + 5)
+#define MPC52xx_USB_IRQ (MPC52xx_PERP_IRQ_BASE + 6)
+#define MPC52xx_ATA_IRQ (MPC52xx_PERP_IRQ_BASE + 7)
+#define MPC52xx_PCI_CNTRL_IRQ (MPC52xx_PERP_IRQ_BASE + 8)
+#define MPC52xx_PCI_SCIRX_IRQ (MPC52xx_PERP_IRQ_BASE + 9)
+#define MPC52xx_PCI_SCITX_IRQ (MPC52xx_PERP_IRQ_BASE + 10)
+#define MPC52xx_PSC4_IRQ (MPC52xx_PERP_IRQ_BASE + 11)
+#define MPC52xx_PSC5_IRQ (MPC52xx_PERP_IRQ_BASE + 12)
+#define MPC52xx_SPI_MODF_IRQ (MPC52xx_PERP_IRQ_BASE + 13)
+#define MPC52xx_SPI_SPIF_IRQ (MPC52xx_PERP_IRQ_BASE + 14)
+#define MPC52xx_I2C1_IRQ (MPC52xx_PERP_IRQ_BASE + 15)
+#define MPC52xx_I2C2_IRQ (MPC52xx_PERP_IRQ_BASE + 16)
+#define MPC52xx_MSCAN1_IRQ (MPC52xx_PERP_IRQ_BASE + 17)
+#define MPC52xx_MSCAN2_IRQ (MPC52xx_PERP_IRQ_BASE + 18)
+#define MPC52xx_IR_RX_IRQ (MPC52xx_PERP_IRQ_BASE + 19)
+#define MPC52xx_IR_TX_IRQ (MPC52xx_PERP_IRQ_BASE + 20)
+#define MPC52xx_XLB_ARB_IRQ (MPC52xx_PERP_IRQ_BASE + 21)
+#define MPC52xx_BDLC_IRQ (MPC52xx_PERP_IRQ_BASE + 22)
+
+
+
+/* ======================================================================== */
+/* Structures mapping of some unit register set */
+/* ======================================================================== */
+
+#ifndef __ASSEMBLY__
+
+/* Memory Mapping Control */
+struct mpc52xx_mmap_ctl {
+ u32 mbar; /* MMAP_CTRL + 0x00 */
+
+ u32 cs0_start; /* MMAP_CTRL + 0x04 */
+ u32 cs0_stop; /* MMAP_CTRL + 0x08 */
+ u32 cs1_start; /* MMAP_CTRL + 0x0c */
+ u32 cs1_stop; /* MMAP_CTRL + 0x10 */
+ u32 cs2_start; /* MMAP_CTRL + 0x14 */
+ u32 cs2_stop; /* MMAP_CTRL + 0x18 */
+ u32 cs3_start; /* MMAP_CTRL + 0x1c */
+ u32 cs3_stop; /* MMAP_CTRL + 0x20 */
+ u32 cs4_start; /* MMAP_CTRL + 0x24 */
+ u32 cs4_stop; /* MMAP_CTRL + 0x28 */
+ u32 cs5_start; /* MMAP_CTRL + 0x2c */
+ u32 cs5_stop; /* MMAP_CTRL + 0x30 */
+
+ u32 sdram0; /* MMAP_CTRL + 0x34 */
+ u32 sdram1; /* MMAP_CTRL + 0X38 */
+
+ u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */
+
+ u32 boot_start; /* MMAP_CTRL + 0x4c */
+ u32 boot_stop; /* MMAP_CTRL + 0x50 */
+
+ u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */
+
+ u32 cs6_start; /* MMAP_CTRL + 0x58 */
+ u32 cs6_stop; /* MMAP_CTRL + 0x5c */
+ u32 cs7_start; /* MMAP_CTRL + 0x60 */
+ u32 cs7_stop; /* MMAP_CTRL + 0x64 */
+};
+
+/* SDRAM control */
+struct mpc52xx_sdram {
+ u32 mode; /* SDRAM + 0x00 */
+ u32 ctrl; /* SDRAM + 0x04 */
+ u32 config1; /* SDRAM + 0x08 */
+ u32 config2; /* SDRAM + 0x0c */
+};
+
+/* Interrupt controller */
+struct mpc52xx_intr {
+ u32 per_mask; /* INTR + 0x00 */
+ u32 per_pri1; /* INTR + 0x04 */
+ u32 per_pri2; /* INTR + 0x08 */
+ u32 per_pri3; /* INTR + 0x0c */
+ u32 ctrl; /* INTR + 0x10 */
+ u32 main_mask; /* INTR + 0x14 */
+ u32 main_pri1; /* INTR + 0x18 */
+ u32 main_pri2; /* INTR + 0x1c */
+ u32 reserved1; /* INTR + 0x20 */
+ u32 enc_status; /* INTR + 0x24 */
+ u32 crit_status; /* INTR + 0x28 */
+ u32 main_status; /* INTR + 0x2c */
+ u32 per_status; /* INTR + 0x30 */
+ u32 reserved2; /* INTR + 0x34 */
+ u32 per_error; /* INTR + 0x38 */
+};
+
+/* SDMA */
+struct mpc52xx_sdma {
+ u32 taskBar; /* SDMA + 0x00 */
+ u32 currentPointer; /* SDMA + 0x04 */
+ u32 endPointer; /* SDMA + 0x08 */
+ u32 variablePointer;/* SDMA + 0x0c */
+
+ u8 IntVect1; /* SDMA + 0x10 */
+ u8 IntVect2; /* SDMA + 0x11 */
+ u16 PtdCntrl; /* SDMA + 0x12 */
+
+ u32 IntPend; /* SDMA + 0x14 */
+ u32 IntMask; /* SDMA + 0x18 */
+
+ u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */
+
+ u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */
+
+ u32 cReqSelect; /* SDMA + 0x5c */
+ u32 task_size0; /* SDMA + 0x60 */
+ u32 task_size1; /* SDMA + 0x64 */
+ u32 MDEDebug; /* SDMA + 0x68 */
+ u32 ADSDebug; /* SDMA + 0x6c */
+ u32 Value1; /* SDMA + 0x70 */
+ u32 Value2; /* SDMA + 0x74 */
+ u32 Control; /* SDMA + 0x78 */
+ u32 Status; /* SDMA + 0x7c */
+ u32 PTDDebug; /* SDMA + 0x80 */
+};
+
+/* GPT */
+struct mpc52xx_gpt {
+ u32 mode; /* GPTx + 0x00 */
+ u32 count; /* GPTx + 0x04 */
+ u32 pwm; /* GPTx + 0x08 */
+ u32 status; /* GPTx + 0X0c */
+};
+
+/* RTC */
+struct mpc52xx_rtc {
+ u32 time_set; /* RTC + 0x00 */
+ u32 date_set; /* RTC + 0x04 */
+ u32 stopwatch; /* RTC + 0x08 */
+ u32 int_enable; /* RTC + 0x0c */
+ u32 time; /* RTC + 0x10 */
+ u32 date; /* RTC + 0x14 */
+ u32 stopwatch_intr; /* RTC + 0x18 */
+ u32 bus_error; /* RTC + 0x1c */
+ u32 dividers; /* RTC + 0x20 */
+};
+
+/* GPIO */
+struct mpc52xx_gpio {
+ u32 port_config; /* GPIO + 0x00 */
+ u32 simple_gpioe; /* GPIO + 0x04 */
+ u32 simple_ode; /* GPIO + 0x08 */
+ u32 simple_ddr; /* GPIO + 0x0c */
+ u32 simple_dvo; /* GPIO + 0x10 */
+ u32 simple_ival; /* GPIO + 0x14 */
+ u8 outo_gpioe; /* GPIO + 0x18 */
+ u8 reserved1[3]; /* GPIO + 0x19 */
+ u8 outo_dvo; /* GPIO + 0x1c */
+ u8 reserved2[3]; /* GPIO + 0x1d */
+ u8 sint_gpioe; /* GPIO + 0x20 */
+ u8 reserved3[3]; /* GPIO + 0x21 */
+ u8 sint_ode; /* GPIO + 0x24 */
+ u8 reserved4[3]; /* GPIO + 0x25 */
+ u8 sint_ddr; /* GPIO + 0x28 */
+ u8 reserved5[3]; /* GPIO + 0x29 */
+ u8 sint_dvo; /* GPIO + 0x2c */
+ u8 reserved6[3]; /* GPIO + 0x2d */
+ u8 sint_inten; /* GPIO + 0x30 */
+ u8 reserved7[3]; /* GPIO + 0x31 */
+ u16 sint_itype; /* GPIO + 0x34 */
+ u16 reserved8; /* GPIO + 0x36 */
+ u8 gpio_control; /* GPIO + 0x38 */
+ u8 reserved9[3]; /* GPIO + 0x39 */
+ u8 sint_istat; /* GPIO + 0x3c */
+ u8 sint_ival; /* GPIO + 0x3d */
+ u8 bus_errs; /* GPIO + 0x3e */
+ u8 reserved10; /* GPIO + 0x3f */
+};
+
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5
+#define MPC52xx_GPIO_PCI_DIS (1<<15)
+
+/* GPIO with WakeUp*/
+struct mpc52xx_gpio_wkup {
+ u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */
+ u8 reserved1[3]; /* GPIO_WKUP + 0x03 */
+ u8 wkup_ode; /* GPIO_WKUP + 0x04 */
+ u8 reserved2[3]; /* GPIO_WKUP + 0x05 */
+ u8 wkup_ddr; /* GPIO_WKUP + 0x08 */
+ u8 reserved3[3]; /* GPIO_WKUP + 0x09 */
+ u8 wkup_dvo; /* GPIO_WKUP + 0x0C */
+ u8 reserved4[3]; /* GPIO_WKUP + 0x0D */
+ u8 wkup_inten; /* GPIO_WKUP + 0x10 */
+ u8 reserved5[3]; /* GPIO_WKUP + 0x11 */
+ u8 wkup_iinten; /* GPIO_WKUP + 0x14 */
+ u8 reserved6[3]; /* GPIO_WKUP + 0x15 */
+ u16 wkup_itype; /* GPIO_WKUP + 0x18 */
+ u8 reserved7[2]; /* GPIO_WKUP + 0x1A */
+ u8 wkup_maste; /* GPIO_WKUP + 0x1C */
+ u8 reserved8[3]; /* GPIO_WKUP + 0x1D */
+ u8 wkup_ival; /* GPIO_WKUP + 0x20 */
+ u8 reserved9[3]; /* GPIO_WKUP + 0x21 */
+ u8 wkup_istat; /* GPIO_WKUP + 0x24 */
+ u8 reserved10[3]; /* GPIO_WKUP + 0x25 */
+};
+
+/* XLB Bus control */
+struct mpc52xx_xlb {
+ u8 reserved[0x40];
+ u32 config; /* XLB + 0x40 */
+ u32 version; /* XLB + 0x44 */
+ u32 status; /* XLB + 0x48 */
+ u32 int_enable; /* XLB + 0x4c */
+ u32 addr_capture; /* XLB + 0x50 */
+ u32 bus_sig_capture; /* XLB + 0x54 */
+ u32 addr_timeout; /* XLB + 0x58 */
+ u32 data_timeout; /* XLB + 0x5c */
+ u32 bus_act_timeout; /* XLB + 0x60 */
+ u32 master_pri_enable; /* XLB + 0x64 */
+ u32 master_priority; /* XLB + 0x68 */
+ u32 base_address; /* XLB + 0x6c */
+ u32 snoop_window; /* XLB + 0x70 */
+};
+
+#define MPC52xx_XLB_CFG_SNOOP (1 << 15)
+
+/* Clock Distribution control */
+struct mpc52xx_cdm {
+ u32 jtag_id; /* CDM + 0x00 reg0 read only */
+ u32 rstcfg; /* CDM + 0x04 reg1 read only */
+ u32 breadcrumb; /* CDM + 0x08 reg2 */
+
+ u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */
+ u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */
+ u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */
+ u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */
+
+ u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */
+ u8 fd_enable; /* CDM + 0x11 reg4 byte1 */
+ u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */
+
+ u32 clk_enables; /* CDM + 0x14 reg5 */
+
+ u8 osc_disable; /* CDM + 0x18 reg6 byte0 */
+ u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */
+
+ u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */
+ u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */
+ u8 reserved1; /* CDM + 0x1e reg7 byte2 */
+ u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */
+
+ u8 soft_reset; /* CDM + 0x20 u8 byte0 */
+ u8 no_ckstp; /* CDM + 0x21 u8 byte0 */
+ u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */
+
+ u8 pll_lock; /* CDM + 0x24 reg9 byte0 */
+ u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */
+ u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */
+ u8 reserved3; /* CDM + 0x27 reg9 byte3 */
+
+ u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */
+ u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */
+
+ u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */
+ u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */
+
+ u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */
+ u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */
+
+ u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */
+ u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+/* ========================================================================= */
+/* Prototypes for MPC52xx syslib */
+/* ========================================================================= */
+
+#ifndef __ASSEMBLY__
+
+extern void mpc52xx_init_irq(void);
+extern int mpc52xx_get_irq(struct pt_regs *regs);
+
+extern unsigned long mpc52xx_find_end_of_memory(void);
+extern void mpc52xx_set_bat(void);
+extern void mpc52xx_map_io(void);
+extern void mpc52xx_restart(char *cmd);
+extern void mpc52xx_halt(void);
+extern void mpc52xx_power_off(void);
+extern void mpc52xx_progress(char *s, unsigned short hex);
+extern void mpc52xx_calibrate_decr(void);
+
+extern void mpc52xx_find_bridges(void);
+
+
+ /* Matching of PSC function */
+struct mpc52xx_psc_func {
+ int id;
+ char *func;
+};
+
+extern int mpc52xx_match_psc_function(int psc_idx, const char *func);
+extern struct mpc52xx_psc_func mpc52xx_psc_functions[];
+ /* This array is to be defined in platform file */
+
+#endif /* __ASSEMBLY__ */
+
+
+/* ========================================================================= */
+/* Platform configuration */
+/* ========================================================================= */
+
+/* The U-Boot platform information struct */
+extern bd_t __res;
+
+/* Platform options */
+#if defined(CONFIG_LITE5200)
+#include <platforms/lite5200.h>
+#endif
+
+
+#endif /* __ASM_MPC52xx_H__ */
diff --git a/include/asm-ppc/mpc52xx_psc.h b/include/asm-ppc/mpc52xx_psc.h
new file mode 100644
index 0000000..9d850b2
--- /dev/null
+++ b/include/asm-ppc/mpc52xx_psc.h
@@ -0,0 +1,191 @@
+/*
+ * include/asm-ppc/mpc52xx_psc.h
+ *
+ * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
+ * PSCs. Theses are shared between multiple drivers since a PSC can be
+ * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Based/Extracted from some header of the 2.4 originally written by
+ * Dale Farnsworth <dfarnsworth@mvista.com>
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_MPC52xx_PSC_H__
+#define __ASM_MPC52xx_PSC_H__
+
+#include <asm/types.h>
+
+/* Max number of PSCs */
+#define MPC52xx_PSC_MAXNUM 6
+
+/* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_CDE 0x0080
+#define MPC52xx_PSC_SR_RXRDY 0x0100
+#define MPC52xx_PSC_SR_RXFULL 0x0200
+#define MPC52xx_PSC_SR_TXRDY 0x0400
+#define MPC52xx_PSC_SR_TXEMP 0x0800
+#define MPC52xx_PSC_SR_OE 0x1000
+#define MPC52xx_PSC_SR_PE 0x2000
+#define MPC52xx_PSC_SR_FE 0x4000
+#define MPC52xx_PSC_SR_RB 0x8000
+
+/* PSC Command values */
+#define MPC52xx_PSC_RX_ENABLE 0x0001
+#define MPC52xx_PSC_RX_DISABLE 0x0002
+#define MPC52xx_PSC_TX_ENABLE 0x0004
+#define MPC52xx_PSC_TX_DISABLE 0x0008
+#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010
+#define MPC52xx_PSC_RST_RX 0x0020
+#define MPC52xx_PSC_RST_TX 0x0030
+#define MPC52xx_PSC_RST_ERR_STAT 0x0040
+#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050
+#define MPC52xx_PSC_START_BRK 0x0060
+#define MPC52xx_PSC_STOP_BRK 0x0070
+
+/* PSC TxRx FIFO status bits */
+#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040
+#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020
+#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010
+#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008
+#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004
+#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002
+#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001
+
+/* PSC interrupt mask bits */
+#define MPC52xx_PSC_IMR_TXRDY 0x0100
+#define MPC52xx_PSC_IMR_RXRDY 0x0200
+#define MPC52xx_PSC_IMR_DB 0x0400
+#define MPC52xx_PSC_IMR_IPC 0x8000
+
+/* PSC input port change bit */
+#define MPC52xx_PSC_CTS 0x01
+#define MPC52xx_PSC_DCD 0x02
+#define MPC52xx_PSC_D_CTS 0x10
+#define MPC52xx_PSC_D_DCD 0x20
+
+/* PSC mode fields */
+#define MPC52xx_PSC_MODE_5_BITS 0x00
+#define MPC52xx_PSC_MODE_6_BITS 0x01
+#define MPC52xx_PSC_MODE_7_BITS 0x02
+#define MPC52xx_PSC_MODE_8_BITS 0x03
+#define MPC52xx_PSC_MODE_BITS_MASK 0x03
+#define MPC52xx_PSC_MODE_PAREVEN 0x00
+#define MPC52xx_PSC_MODE_PARODD 0x04
+#define MPC52xx_PSC_MODE_PARFORCE 0x08
+#define MPC52xx_PSC_MODE_PARNONE 0x10
+#define MPC52xx_PSC_MODE_ERR 0x20
+#define MPC52xx_PSC_MODE_FFULL 0x40
+#define MPC52xx_PSC_MODE_RXRTS 0x80
+
+#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00
+#define MPC52xx_PSC_MODE_ONE_STOP 0x07
+#define MPC52xx_PSC_MODE_TWO_STOP 0x0f
+
+#define MPC52xx_PSC_RFNUM_MASK 0x01ff
+
+
+/* Structure of the hardware registers */
+struct mpc52xx_psc {
+ u8 mode; /* PSC + 0x00 */
+ u8 reserved0[3];
+ union { /* PSC + 0x04 */
+ u16 status;
+ u16 clock_select;
+ } sr_csr;
+#define mpc52xx_psc_status sr_csr.status
+#define mpc52xx_psc_clock_select sr_csr.clock_select
+ u16 reserved1;
+ u8 command; /* PSC + 0x08 */
+ u8 reserved2[3];
+ union { /* PSC + 0x0c */
+ u8 buffer_8;
+ u16 buffer_16;
+ u32 buffer_32;
+ } buffer;
+#define mpc52xx_psc_buffer_8 buffer.buffer_8
+#define mpc52xx_psc_buffer_16 buffer.buffer_16
+#define mpc52xx_psc_buffer_32 buffer.buffer_32
+ union { /* PSC + 0x10 */
+ u8 ipcr;
+ u8 acr;
+ } ipcr_acr;
+#define mpc52xx_psc_ipcr ipcr_acr.ipcr
+#define mpc52xx_psc_acr ipcr_acr.acr
+ u8 reserved3[3];
+ union { /* PSC + 0x14 */
+ u16 isr;
+ u16 imr;
+ } isr_imr;
+#define mpc52xx_psc_isr isr_imr.isr
+#define mpc52xx_psc_imr isr_imr.imr
+ u16 reserved4;
+ u8 ctur; /* PSC + 0x18 */
+ u8 reserved5[3];
+ u8 ctlr; /* PSC + 0x1c */
+ u8 reserved6[3];
+ u16 ccr; /* PSC + 0x20 */
+ u8 reserved7[14];
+ u8 ivr; /* PSC + 0x30 */
+ u8 reserved8[3];
+ u8 ip; /* PSC + 0x34 */
+ u8 reserved9[3];
+ u8 op1; /* PSC + 0x38 */
+ u8 reserved10[3];
+ u8 op0; /* PSC + 0x3c */
+ u8 reserved11[3];
+ u32 sicr; /* PSC + 0x40 */
+ u8 ircr1; /* PSC + 0x44 */
+ u8 reserved13[3];
+ u8 ircr2; /* PSC + 0x44 */
+ u8 reserved14[3];
+ u8 irsdr; /* PSC + 0x4c */
+ u8 reserved15[3];
+ u8 irmdr; /* PSC + 0x50 */
+ u8 reserved16[3];
+ u8 irfdr; /* PSC + 0x54 */
+ u8 reserved17[3];
+ u16 rfnum; /* PSC + 0x58 */
+ u16 reserved18;
+ u16 tfnum; /* PSC + 0x5c */
+ u16 reserved19;
+ u32 rfdata; /* PSC + 0x60 */
+ u16 rfstat; /* PSC + 0x64 */
+ u16 reserved20;
+ u8 rfcntl; /* PSC + 0x68 */
+ u8 reserved21[5];
+ u16 rfalarm; /* PSC + 0x6e */
+ u16 reserved22;
+ u16 rfrptr; /* PSC + 0x72 */
+ u16 reserved23;
+ u16 rfwptr; /* PSC + 0x76 */
+ u16 reserved24;
+ u16 rflrfptr; /* PSC + 0x7a */
+ u16 reserved25;
+ u16 rflwfptr; /* PSC + 0x7e */
+ u32 tfdata; /* PSC + 0x80 */
+ u16 tfstat; /* PSC + 0x84 */
+ u16 reserved26;
+ u8 tfcntl; /* PSC + 0x88 */
+ u8 reserved27[5];
+ u16 tfalarm; /* PSC + 0x8e */
+ u16 reserved28;
+ u16 tfrptr; /* PSC + 0x92 */
+ u16 reserved29;
+ u16 tfwptr; /* PSC + 0x96 */
+ u16 reserved30;
+ u16 tflrfptr; /* PSC + 0x9a */
+ u16 reserved31;
+ u16 tflwfptr; /* PSC + 0x9e */
+};
+
+
+#endif /* __ASM_MPC52xx_PSC_H__ */
diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
new file mode 100644
index 0000000..d820894
--- /dev/null
+++ b/include/asm-ppc/mpc8260.h
@@ -0,0 +1,79 @@
+/*
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each. Rather than change every
+ * file that has to include MPC8260 configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_MPC8260_H__
+#define __ASM_PPC_MPC8260_H__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_8260
+
+#ifdef CONFIG_EST8260
+#include <platforms/est8260.h>
+#endif
+
+#ifdef CONFIG_SBC82xx
+#include <platforms/sbc82xx.h>
+#endif
+
+#ifdef CONFIG_SBS8260
+#include <platforms/sbs8260.h>
+#endif
+
+#ifdef CONFIG_RPX8260
+#include <platforms/rpx8260.h>
+#endif
+
+#ifdef CONFIG_WILLOW
+#include <platforms/willow.h>
+#endif
+
+#ifdef CONFIG_TQM8260
+#include <platforms/tqm8260.h>
+#endif
+
+#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
+#include <platforms/pq2ads.h>
+#endif
+
+#ifdef CONFIG_PCI_8260
+#include <syslib/m8260_pci.h>
+#endif
+
+/* Make sure the memory translation stuff is there if PCI not used.
+ */
+#ifndef _IO_BASE
+#define _IO_BASE 0
+#endif
+
+#ifndef _ISA_MEM_BASE
+#define _ISA_MEM_BASE 0
+#endif
+
+#ifndef PCI_DRAM_OFFSET
+#define PCI_DRAM_OFFSET 0
+#endif
+
+/* Map 256MB I/O region
+ */
+#ifndef IO_PHYS_ADDR
+#define IO_PHYS_ADDR 0xe0000000
+#endif
+#ifndef IO_VIRT_ADDR
+#define IO_VIRT_ADDR IO_PHYS_ADDR
+#endif
+
+#ifndef __ASSEMBLY__
+/* The "residual" data board information structure the boot loader
+ * hands to us.
+ */
+extern unsigned char __res[];
+#endif
+
+#endif /* CONFIG_8260 */
+#endif /* !__ASM_PPC_MPC8260_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8260_pci9.h b/include/asm-ppc/mpc8260_pci9.h
new file mode 100644
index 0000000..26b3f6e
--- /dev/null
+++ b/include/asm-ppc/mpc8260_pci9.h
@@ -0,0 +1,51 @@
+/* include/asm-ppc/mpc8260_pci9.h
+ *
+ * Undefine the PCI read* and in* macros so we can define them as functions
+ * that implement the workaround for the MPC8260 device erratum PCI 9.
+ *
+ * This header file should only be included at the end of include/asm-ppc/io.h
+ * and never included directly anywhere else.
+ *
+ * Author: andy_lowe@mvista.com
+ *
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _PPC_IO_H
+#error "Do not include mpc8260_pci9.h directly."
+#endif
+
+#ifdef __KERNEL__
+#ifndef __CONFIG_8260_PCI9_DEFS
+#define __CONFIG_8260_PCI9_DEFS
+
+#undef readb
+#undef readw
+#undef readl
+#undef insb
+#undef insw
+#undef insl
+#undef inb
+#undef inw
+#undef inl
+#undef insw_ns
+#undef insl_ns
+#undef memcpy_fromio
+
+extern int readb(volatile unsigned char *addr);
+extern int readw(volatile unsigned short *addr);
+extern unsigned readl(volatile unsigned *addr);
+extern void insb(unsigned port, void *buf, int ns);
+extern void insw(unsigned port, void *buf, int ns);
+extern void insl(unsigned port, void *buf, int nl);
+extern int inb(unsigned port);
+extern int inw(unsigned port);
+extern unsigned inl(unsigned port);
+extern void insw_ns(unsigned port, void *buf, int ns);
+extern void insl_ns(unsigned port, void *buf, int nl);
+extern void *memcpy_fromio(void *dest, unsigned long src, size_t count);
+
+#endif /* !__CONFIG_8260_PCI9_DEFS */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc83xx.h b/include/asm-ppc/mpc83xx.h
new file mode 100644
index 0000000..bb1b057
--- /dev/null
+++ b/include/asm-ppc/mpc83xx.h
@@ -0,0 +1,114 @@
+/*
+ * include/asm-ppc/mpc83xx.h
+ *
+ * MPC83xx definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MPC83xx_H__
+#define __ASM_MPC83xx_H__
+
+#include <linux/config.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_83xx
+
+#ifdef CONFIG_MPC834x_SYS
+#include <platforms/83xx/mpc834x_sys.h>
+#endif
+
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#ifdef CONFIG_PCI
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define PCI_DRAM_OFFSET 0
+#endif
+
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+extern unsigned char __res[];
+
+/* Internal IRQs on MPC83xx OpenPIC */
+/* Not all of these exist on all MPC83xx implementations */
+
+#ifndef MPC83xx_IPIC_IRQ_OFFSET
+#define MPC83xx_IPIC_IRQ_OFFSET 0
+#endif
+
+#define NR_IPIC_INTS 128
+
+#define MPC83xx_IRQ_UART1 ( 9 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_UART2 (10 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_SEC2 (11 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_IIC1 (14 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_IIC2 (15 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_SPI (16 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT1 (17 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT2 (18 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT3 (19 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT4 (20 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT5 (21 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT6 (22 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT7 (23 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC1_TX (32 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC1_RX (33 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC1_ERROR (34 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC2_TX (35 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC2_RX (36 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_TSEC2_ERROR (37 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_USB2_DR (38 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_USB2_MPH (39 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_EXT0 (48 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_RTC_SEC (64 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_PIT (65 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_PCI1 (66 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_PCI2 (67 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_RTC_ALR (68 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_MU (69 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_SBA (70 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_DMA (71 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM4 (72 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM8 (73 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GPIO1 (74 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GPIO2 (75 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_DDR (76 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_LBC (77 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM2 (78 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM6 (79 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_PMC (80 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM3 (84 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM7 (85 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM1 (90 + MPC83xx_IPIC_IRQ_OFFSET)
+#define MPC83xx_IRQ_GTM5 (91 + MPC83xx_IPIC_IRQ_OFFSET)
+
+#define MPC83xx_CCSRBAR_SIZE (1024*1024)
+
+/* Let modules/drivers get at immrbar (physical) */
+extern phys_addr_t immrbar;
+
+enum ppc_sys_devices {
+ MPC83xx_TSEC1,
+ MPC83xx_TSEC2,
+ MPC83xx_IIC1,
+ MPC83xx_IIC2,
+ MPC83xx_DUART,
+ MPC83xx_SEC2,
+ MPC83xx_USB2_DR,
+ MPC83xx_USB2_MPH,
+};
+
+#endif /* CONFIG_83xx */
+#endif /* __ASM_MPC83xx_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h
new file mode 100644
index 0000000..22713e3
--- /dev/null
+++ b/include/asm-ppc/mpc85xx.h
@@ -0,0 +1,134 @@
+/*
+ * include/asm-ppc/mpc85xx.h
+ *
+ * MPC85xx definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MPC85xx_H__
+#define __ASM_MPC85xx_H__
+
+#include <linux/config.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_85xx
+
+#ifdef CONFIG_MPC8540_ADS
+#include <platforms/85xx/mpc8540_ads.h>
+#endif
+#ifdef CONFIG_MPC8555_CDS
+#include <platforms/85xx/mpc8555_cds.h>
+#endif
+#ifdef CONFIG_MPC8560_ADS
+#include <platforms/85xx/mpc8560_ads.h>
+#endif
+#ifdef CONFIG_SBC8560
+#include <platforms/85xx/sbc8560.h>
+#endif
+#ifdef CONFIG_STX_GP3
+#include <platforms/85xx/stx_gp3.h>
+#endif
+
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#ifdef CONFIG_PCI
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define PCI_DRAM_OFFSET 0
+#endif
+
+/*
+ * The "residual" board information structure the boot loader passes
+ * into the kernel.
+ */
+extern unsigned char __res[];
+
+/* Offset from CCSRBAR */
+#define MPC85xx_CPM_OFFSET (0x80000)
+#define MPC85xx_CPM_SIZE (0x40000)
+#define MPC85xx_DMA_OFFSET (0x21000)
+#define MPC85xx_DMA_SIZE (0x01000)
+#define MPC85xx_DMA0_OFFSET (0x21100)
+#define MPC85xx_DMA0_SIZE (0x00080)
+#define MPC85xx_DMA1_OFFSET (0x21180)
+#define MPC85xx_DMA1_SIZE (0x00080)
+#define MPC85xx_DMA2_OFFSET (0x21200)
+#define MPC85xx_DMA2_SIZE (0x00080)
+#define MPC85xx_DMA3_OFFSET (0x21280)
+#define MPC85xx_DMA3_SIZE (0x00080)
+#define MPC85xx_ENET1_OFFSET (0x24000)
+#define MPC85xx_ENET1_SIZE (0x01000)
+#define MPC85xx_ENET2_OFFSET (0x25000)
+#define MPC85xx_ENET2_SIZE (0x01000)
+#define MPC85xx_ENET3_OFFSET (0x26000)
+#define MPC85xx_ENET3_SIZE (0x01000)
+#define MPC85xx_GUTS_OFFSET (0xe0000)
+#define MPC85xx_GUTS_SIZE (0x01000)
+#define MPC85xx_IIC1_OFFSET (0x03000)
+#define MPC85xx_IIC1_SIZE (0x01000)
+#define MPC85xx_OPENPIC_OFFSET (0x40000)
+#define MPC85xx_OPENPIC_SIZE (0x40000)
+#define MPC85xx_PCI1_OFFSET (0x08000)
+#define MPC85xx_PCI1_SIZE (0x01000)
+#define MPC85xx_PCI2_OFFSET (0x09000)
+#define MPC85xx_PCI2_SIZE (0x01000)
+#define MPC85xx_PERFMON_OFFSET (0xe1000)
+#define MPC85xx_PERFMON_SIZE (0x01000)
+#define MPC85xx_SEC2_OFFSET (0x30000)
+#define MPC85xx_SEC2_SIZE (0x10000)
+#define MPC85xx_UART0_OFFSET (0x04500)
+#define MPC85xx_UART0_SIZE (0x00100)
+#define MPC85xx_UART1_OFFSET (0x04600)
+#define MPC85xx_UART1_SIZE (0x00100)
+
+#define MPC85xx_CCSRBAR_SIZE (1024*1024)
+
+/* Let modules/drivers get at CCSRBAR */
+extern phys_addr_t get_ccsrbar(void);
+
+#ifdef MODULE
+#define CCSRBAR get_ccsrbar()
+#else
+#define CCSRBAR BOARD_CCSRBAR
+#endif
+
+enum ppc_sys_devices {
+ MPC85xx_TSEC1,
+ MPC85xx_TSEC2,
+ MPC85xx_FEC,
+ MPC85xx_IIC1,
+ MPC85xx_DMA0,
+ MPC85xx_DMA1,
+ MPC85xx_DMA2,
+ MPC85xx_DMA3,
+ MPC85xx_DUART,
+ MPC85xx_PERFMON,
+ MPC85xx_SEC2,
+ MPC85xx_CPM_SPI,
+ MPC85xx_CPM_I2C,
+ MPC85xx_CPM_USB,
+ MPC85xx_CPM_SCC1,
+ MPC85xx_CPM_SCC2,
+ MPC85xx_CPM_SCC3,
+ MPC85xx_CPM_SCC4,
+ MPC85xx_CPM_FCC1,
+ MPC85xx_CPM_FCC2,
+ MPC85xx_CPM_FCC3,
+ MPC85xx_CPM_MCC1,
+ MPC85xx_CPM_MCC2,
+ MPC85xx_CPM_SMC1,
+ MPC85xx_CPM_SMC2,
+};
+
+#endif /* CONFIG_85xx */
+#endif /* __ASM_MPC85xx_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
new file mode 100644
index 0000000..714d69c
--- /dev/null
+++ b/include/asm-ppc/mpc8xx.h
@@ -0,0 +1,103 @@
+/* This is the single file included by all MPC8xx build options.
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each. Rather than change every
+ * file that has to include MPC8xx configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifdef __KERNEL__
+#ifndef __CONFIG_8xx_DEFS
+#define __CONFIG_8xx_DEFS
+
+#include <linux/config.h>
+
+#ifdef CONFIG_8xx
+
+#ifdef CONFIG_MBX
+#include <platforms/mbx.h>
+#endif
+
+#ifdef CONFIG_FADS
+#include <platforms/fads.h>
+#endif
+
+#ifdef CONFIG_RPXLITE
+#include <platforms/rpxlite.h>
+#endif
+
+#ifdef CONFIG_BSEIP
+#include <platforms/bseip.h>
+#endif
+
+#ifdef CONFIG_RPXCLASSIC
+#include <platforms/rpxclassic.h>
+#endif
+
+#if defined(CONFIG_TQM8xxL)
+#include <platforms/tqm8xx.h>
+#endif
+
+#if defined(CONFIG_SPD823TS)
+#include <platforms/spd8xx.h>
+#endif
+
+#if defined(CONFIG_IVMS8) || defined(CONFIG_IVML24)
+#include <platforms/ivms8.h>
+#endif
+
+#if defined(CONFIG_HERMES_PRO)
+#include <platforms/hermes.h>
+#endif
+
+#if defined(CONFIG_IP860)
+#include <platforms/ip860.h>
+#endif
+
+#if defined(CONFIG_LWMON)
+#include <platforms/lwmon.h>
+#endif
+
+#if defined(CONFIG_PCU_E)
+#include <platforms/pcu_e.h>
+#endif
+
+#if defined(CONFIG_CCM)
+#include <platforms/ccm.h>
+#endif
+
+#if defined(CONFIG_LANTEC)
+#include <platforms/lantec.h>
+#endif
+
+/* Currently, all 8xx boards that support a processor to PCI/ISA bridge
+ * use the same memory map.
+ */
+#if 0
+#if defined(CONFIG_PCI) && defined(PCI_ISA_IO_ADDR)
+#define _IO_BASE PCI_ISA_IO_ADDR
+#define _ISA_MEM_BASE PCI_ISA_MEM_ADDR
+#define PCI_DRAM_OFFSET 0x80000000
+#else
+#define _IO_BASE 0
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+#endif
+#else
+#if !defined(_IO_BASE) /* defined in board specific header */
+#define _IO_BASE 0
+#endif
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+#endif
+
+#ifndef __ASSEMBLY__
+/* The "residual" data board information structure the boot loader
+ * hands to us.
+ */
+extern unsigned char __res[];
+
+struct pt_regs;
+
+#endif /* !__ASSEMBLY__ */
+#endif /* CONFIG_8xx */
+#endif /* __CONFIG_8xx_DEFS */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/msgbuf.h b/include/asm-ppc/msgbuf.h
new file mode 100644
index 0000000..1053452
--- /dev/null
+++ b/include/asm-ppc/msgbuf.h
@@ -0,0 +1,25 @@
+#ifndef _PPC_MSGBUF_H
+#define _PPC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for the PPC architecture.
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ unsigned int __unused1;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned int __unused2;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned int __unused3;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _PPC_MSGBUF_H */
diff --git a/include/asm-ppc/mv64x60.h b/include/asm-ppc/mv64x60.h
new file mode 100644
index 0000000..cc25b92
--- /dev/null
+++ b/include/asm-ppc/mv64x60.h
@@ -0,0 +1,345 @@
+/*
+ * include/asm-ppc/mv64x60.h
+ *
+ * Prototypes, etc. for the Marvell/Galileo MV64x60 host bridge routines.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASMPPC_MV64x60_H
+#define __ASMPPC_MV64x60_H
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/config.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mv64x60_defs.h>
+
+extern u8 mv64x60_pci_exclude_bridge;
+
+extern spinlock_t mv64x60_lock;
+
+/* 32-bit Window table entry defines */
+#define MV64x60_CPU2MEM_0_WIN 0
+#define MV64x60_CPU2MEM_1_WIN 1
+#define MV64x60_CPU2MEM_2_WIN 2
+#define MV64x60_CPU2MEM_3_WIN 3
+#define MV64x60_CPU2DEV_0_WIN 4
+#define MV64x60_CPU2DEV_1_WIN 5
+#define MV64x60_CPU2DEV_2_WIN 6
+#define MV64x60_CPU2DEV_3_WIN 7
+#define MV64x60_CPU2BOOT_WIN 8
+#define MV64x60_CPU2PCI0_IO_WIN 9
+#define MV64x60_CPU2PCI0_MEM_0_WIN 10
+#define MV64x60_CPU2PCI0_MEM_1_WIN 11
+#define MV64x60_CPU2PCI0_MEM_2_WIN 12
+#define MV64x60_CPU2PCI0_MEM_3_WIN 13
+#define MV64x60_CPU2PCI1_IO_WIN 14
+#define MV64x60_CPU2PCI1_MEM_0_WIN 15
+#define MV64x60_CPU2PCI1_MEM_1_WIN 16
+#define MV64x60_CPU2PCI1_MEM_2_WIN 17
+#define MV64x60_CPU2PCI1_MEM_3_WIN 18
+#define MV64x60_CPU2SRAM_WIN 19
+#define MV64x60_CPU2PCI0_IO_REMAP_WIN 20
+#define MV64x60_CPU2PCI1_IO_REMAP_WIN 21
+#define MV64x60_CPU_PROT_0_WIN 22
+#define MV64x60_CPU_PROT_1_WIN 23
+#define MV64x60_CPU_PROT_2_WIN 24
+#define MV64x60_CPU_PROT_3_WIN 25
+#define MV64x60_CPU_SNOOP_0_WIN 26
+#define MV64x60_CPU_SNOOP_1_WIN 27
+#define MV64x60_CPU_SNOOP_2_WIN 28
+#define MV64x60_CPU_SNOOP_3_WIN 29
+#define MV64x60_PCI02MEM_REMAP_0_WIN 30
+#define MV64x60_PCI02MEM_REMAP_1_WIN 31
+#define MV64x60_PCI02MEM_REMAP_2_WIN 32
+#define MV64x60_PCI02MEM_REMAP_3_WIN 33
+#define MV64x60_PCI12MEM_REMAP_0_WIN 34
+#define MV64x60_PCI12MEM_REMAP_1_WIN 35
+#define MV64x60_PCI12MEM_REMAP_2_WIN 36
+#define MV64x60_PCI12MEM_REMAP_3_WIN 37
+#define MV64x60_ENET2MEM_0_WIN 38
+#define MV64x60_ENET2MEM_1_WIN 39
+#define MV64x60_ENET2MEM_2_WIN 40
+#define MV64x60_ENET2MEM_3_WIN 41
+#define MV64x60_ENET2MEM_4_WIN 42
+#define MV64x60_ENET2MEM_5_WIN 43
+#define MV64x60_MPSC2MEM_0_WIN 44
+#define MV64x60_MPSC2MEM_1_WIN 45
+#define MV64x60_MPSC2MEM_2_WIN 46
+#define MV64x60_MPSC2MEM_3_WIN 47
+#define MV64x60_IDMA2MEM_0_WIN 48
+#define MV64x60_IDMA2MEM_1_WIN 49
+#define MV64x60_IDMA2MEM_2_WIN 50
+#define MV64x60_IDMA2MEM_3_WIN 51
+#define MV64x60_IDMA2MEM_4_WIN 52
+#define MV64x60_IDMA2MEM_5_WIN 53
+#define MV64x60_IDMA2MEM_6_WIN 54
+#define MV64x60_IDMA2MEM_7_WIN 55
+
+#define MV64x60_32BIT_WIN_COUNT 56
+
+/* 64-bit Window table entry defines */
+#define MV64x60_CPU2PCI0_MEM_0_REMAP_WIN 0
+#define MV64x60_CPU2PCI0_MEM_1_REMAP_WIN 1
+#define MV64x60_CPU2PCI0_MEM_2_REMAP_WIN 2
+#define MV64x60_CPU2PCI0_MEM_3_REMAP_WIN 3
+#define MV64x60_CPU2PCI1_MEM_0_REMAP_WIN 4
+#define MV64x60_CPU2PCI1_MEM_1_REMAP_WIN 5
+#define MV64x60_CPU2PCI1_MEM_2_REMAP_WIN 6
+#define MV64x60_CPU2PCI1_MEM_3_REMAP_WIN 7
+#define MV64x60_PCI02MEM_ACC_CNTL_0_WIN 8
+#define MV64x60_PCI02MEM_ACC_CNTL_1_WIN 9
+#define MV64x60_PCI02MEM_ACC_CNTL_2_WIN 10
+#define MV64x60_PCI02MEM_ACC_CNTL_3_WIN 11
+#define MV64x60_PCI12MEM_ACC_CNTL_0_WIN 12
+#define MV64x60_PCI12MEM_ACC_CNTL_1_WIN 13
+#define MV64x60_PCI12MEM_ACC_CNTL_2_WIN 14
+#define MV64x60_PCI12MEM_ACC_CNTL_3_WIN 15
+#define MV64x60_PCI02MEM_SNOOP_0_WIN 16
+#define MV64x60_PCI02MEM_SNOOP_1_WIN 17
+#define MV64x60_PCI02MEM_SNOOP_2_WIN 18
+#define MV64x60_PCI02MEM_SNOOP_3_WIN 19
+#define MV64x60_PCI12MEM_SNOOP_0_WIN 20
+#define MV64x60_PCI12MEM_SNOOP_1_WIN 21
+#define MV64x60_PCI12MEM_SNOOP_2_WIN 22
+#define MV64x60_PCI12MEM_SNOOP_3_WIN 23
+
+#define MV64x60_64BIT_WIN_COUNT 24
+
+/*
+ * Define a structure that's used to pass in config information to the
+ * core routines.
+ */
+struct mv64x60_pci_window {
+ u32 cpu_base;
+ u32 pci_base_hi;
+ u32 pci_base_lo;
+ u32 size;
+ u32 swap;
+};
+
+struct mv64x60_pci_info {
+ u8 enable_bus; /* allow access to this PCI bus? */
+
+ struct mv64x60_pci_window pci_io;
+ struct mv64x60_pci_window pci_mem[3];
+
+ u32 acc_cntl_options[MV64x60_CPU2MEM_WINDOWS];
+ u32 snoop_options[MV64x60_CPU2MEM_WINDOWS];
+ u16 pci_cmd_bits;
+ u16 latency_timer;
+};
+
+struct mv64x60_setup_info {
+ u32 phys_reg_base;
+ u32 window_preserve_mask_32_hi;
+ u32 window_preserve_mask_32_lo;
+ u32 window_preserve_mask_64;
+
+ u32 cpu_prot_options[MV64x60_CPU2MEM_WINDOWS];
+ u32 cpu_snoop_options[MV64x60_CPU2MEM_WINDOWS];
+ u32 enet_options[MV64x60_CPU2MEM_WINDOWS];
+ u32 mpsc_options[MV64x60_CPU2MEM_WINDOWS];
+ u32 idma_options[MV64x60_CPU2MEM_WINDOWS];
+
+ struct mv64x60_pci_info pci_0;
+ struct mv64x60_pci_info pci_1;
+};
+
+/* Define what the top bits in the extra member of a window entry means. */
+#define MV64x60_EXTRA_INVALID 0x00000000
+#define MV64x60_EXTRA_CPUWIN_ENAB 0x10000000
+#define MV64x60_EXTRA_CPUPROT_ENAB 0x20000000
+#define MV64x60_EXTRA_ENET_ENAB 0x30000000
+#define MV64x60_EXTRA_MPSC_ENAB 0x40000000
+#define MV64x60_EXTRA_IDMA_ENAB 0x50000000
+#define MV64x60_EXTRA_PCIACC_ENAB 0x60000000
+
+#define MV64x60_EXTRA_MASK 0xf0000000
+
+/*
+ * Define the 'handle' struct that will be passed between the 64x60 core
+ * code and the platform-specific code that will use it. The handle
+ * will contain pointers to chip-specific routines & information.
+ */
+struct mv64x60_32bit_window {
+ u32 base_reg;
+ u32 size_reg;
+ u8 base_bits;
+ u8 size_bits;
+ u32 (*get_from_field)(u32 val, u32 num_bits);
+ u32 (*map_to_field)(u32 val, u32 num_bits);
+ u32 extra;
+};
+
+struct mv64x60_64bit_window {
+ u32 base_hi_reg;
+ u32 base_lo_reg;
+ u32 size_reg;
+ u8 base_lo_bits;
+ u8 size_bits;
+ u32 (*get_from_field)(u32 val, u32 num_bits);
+ u32 (*map_to_field)(u32 val, u32 num_bits);
+ u32 extra;
+};
+
+typedef struct mv64x60_handle mv64x60_handle_t;
+struct mv64x60_chip_info {
+ u32 (*translate_size)(u32 base, u32 size, u32 num_bits);
+ u32 (*untranslate_size)(u32 base, u32 size, u32 num_bits);
+ void (*set_pci2mem_window)(struct pci_controller *hose, u32 bus,
+ u32 window, u32 base);
+ void (*set_pci2regs_window)(struct mv64x60_handle *bh,
+ struct pci_controller *hose, u32 bus, u32 base);
+ u32 (*is_enabled_32bit)(mv64x60_handle_t *bh, u32 window);
+ void (*enable_window_32bit)(mv64x60_handle_t *bh, u32 window);
+ void (*disable_window_32bit)(mv64x60_handle_t *bh, u32 window);
+ void (*enable_window_64bit)(mv64x60_handle_t *bh, u32 window);
+ void (*disable_window_64bit)(mv64x60_handle_t *bh, u32 window);
+ void (*disable_all_windows)(mv64x60_handle_t *bh,
+ struct mv64x60_setup_info *si);
+ void (*config_io2mem_windows)(mv64x60_handle_t *bh,
+ struct mv64x60_setup_info *si,
+ u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+ void (*set_mpsc2regs_window)(struct mv64x60_handle *bh, u32 base);
+ void (*chip_specific_init)(mv64x60_handle_t *bh,
+ struct mv64x60_setup_info *si);
+
+ struct mv64x60_32bit_window *window_tab_32bit;
+ struct mv64x60_64bit_window *window_tab_64bit;
+};
+
+struct mv64x60_handle {
+ u32 type; /* type of bridge */
+ u32 rev; /* revision of bridge */
+ void *v_base; /* virtual base addr of bridge regs */
+ phys_addr_t p_base; /* physical base addr of bridge regs */
+
+ u32 pci_mode_a; /* pci 0 mode: conventional pci, pci-x*/
+ u32 pci_mode_b; /* pci 1 mode: conventional pci, pci-x*/
+
+ u32 io_base_a; /* vaddr of pci 0's I/O space */
+ u32 io_base_b; /* vaddr of pci 1's I/O space */
+
+ struct pci_controller *hose_a;
+ struct pci_controller *hose_b;
+
+ struct mv64x60_chip_info *ci; /* chip/bridge-specific info */
+};
+
+
+/* Define I/O routines for accessing registers on the 64x60 bridge. */
+extern inline void
+mv64x60_write(struct mv64x60_handle *bh, u32 offset, u32 val) {
+ ulong flags;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ out_le32(bh->v_base + offset, val);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+}
+
+extern inline u32
+mv64x60_read(struct mv64x60_handle *bh, u32 offset) {
+ ulong flags;
+ u32 reg;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ reg = in_le32(bh->v_base + offset);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+ return reg;
+}
+
+extern inline void
+mv64x60_modify(struct mv64x60_handle *bh, u32 offs, u32 data, u32 mask)
+{
+ u32 reg;
+ ulong flags;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ reg = in_le32(bh->v_base + offs) & (~mask);
+ reg |= data & mask;
+ out_le32(bh->v_base + offs, reg);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+}
+
+#define mv64x60_set_bits(bh, offs, bits) mv64x60_modify(bh, offs, ~0, bits)
+#define mv64x60_clr_bits(bh, offs, bits) mv64x60_modify(bh, offs, 0, bits)
+
+
+/* Externally visible function prototypes */
+int mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si);
+u32 mv64x60_get_mem_size(u32 bridge_base, u32 chip_type);
+void mv64x60_early_init(struct mv64x60_handle *bh,
+ struct mv64x60_setup_info *si);
+void mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr,
+ u32 cfg_data, struct pci_controller **hose);
+int mv64x60_get_type(struct mv64x60_handle *bh);
+int mv64x60_setup_for_chip(struct mv64x60_handle *bh);
+void *mv64x60_get_bridge_vbase(void);
+u32 mv64x60_get_bridge_type(void);
+u32 mv64x60_get_bridge_rev(void);
+void mv64x60_get_mem_windows(struct mv64x60_handle *bh,
+ u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+void mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh,
+ struct mv64x60_setup_info *si,
+ u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+void mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh,
+ struct mv64x60_pci_info *pi, u32 bus);
+void mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh,
+ struct pci_controller *hose, struct mv64x60_pci_info *pi, u32 bus,
+ u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+void mv64x60_config_resources(struct pci_controller *hose,
+ struct mv64x60_pci_info *pi, u32 io_base);
+void mv64x60_config_pci_params(struct pci_controller *hose,
+ struct mv64x60_pci_info *pi);
+void mv64x60_pd_fixup(struct mv64x60_handle *bh,
+ struct platform_device *pd_devs[], u32 entries);
+void mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window,
+ u32 *base, u32 *size);
+void mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window, u32 base,
+ u32 size, u32 other_bits);
+void mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window,
+ u32 *base_hi, u32 *base_lo, u32 *size);
+void mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window,
+ u32 base_hi, u32 base_lo, u32 size, u32 other_bits);
+void mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus);
+int mv64x60_pci_exclude_device(u8 bus, u8 devfn);
+
+
+void gt64260_init_irq(void);
+int gt64260_get_irq(struct pt_regs *regs);
+void mv64360_init_irq(void);
+int mv64360_get_irq(struct pt_regs *regs);
+
+u32 mv64x60_mask(u32 val, u32 num_bits);
+u32 mv64x60_shift_left(u32 val, u32 num_bits);
+u32 mv64x60_shift_right(u32 val, u32 num_bits);
+u32 mv64x60_calc_mem_size(struct mv64x60_handle *bh,
+ u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+
+void mv64x60_progress_init(u32 base);
+void mv64x60_mpsc_progress(char *s, unsigned short hex);
+
+extern struct mv64x60_32bit_window
+ gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT];
+extern struct mv64x60_64bit_window
+ gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT];
+extern struct mv64x60_32bit_window
+ mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT];
+extern struct mv64x60_64bit_window
+ mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT];
+
+#endif /* __ASMPPC_MV64x60_H */
diff --git a/include/asm-ppc/mv64x60_defs.h b/include/asm-ppc/mv64x60_defs.h
new file mode 100644
index 0000000..2f42874
--- /dev/null
+++ b/include/asm-ppc/mv64x60_defs.h
@@ -0,0 +1,973 @@
+/*
+ * include/asm-ppc/gt64260_defs.h
+ *
+ * Register definitions for the Marvell/Galileo GT64260, MV64360, etc.
+ * host bridges.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASMPPC_MV64x60_DEFS_H
+#define __ASMPPC_MV64x60_DEFS_H
+
+/*
+ * Define the Marvell bridges that are supported
+ */
+#define MV64x60_TYPE_INVALID 0
+#define MV64x60_TYPE_GT64260A 1
+#define MV64x60_TYPE_GT64260B 2
+#define MV64x60_TYPE_MV64360 3
+#define MV64x60_TYPE_MV64361 4
+#define MV64x60_TYPE_MV64362 5
+#define MV64x60_TYPE_MV64460 6
+
+
+/* Revisions of each supported chip */
+#define GT64260_REV_A 0x10
+#define GT64260_REV_B 0x20
+#define MV64360 0x01
+#define MV64460 0x01
+
+/* Minimum window size supported by 64260 is 1MB */
+#define GT64260_WINDOW_SIZE_MIN 0x00100000
+#define MV64360_WINDOW_SIZE_MIN 0x00010000
+
+#define MV64x60_TCLK_FREQ_MAX 133333333U
+
+/* IRQ's for embedded controllers */
+#define MV64x60_IRQ_DEV 1
+#define MV64x60_IRQ_CPU_ERR 3
+#define MV64x60_IRQ_TIMER_0_1 8
+#define MV64x60_IRQ_TIMER_2_3 9
+#define MV64x60_IRQ_TIMER_4_5 10
+#define MV64x60_IRQ_TIMER_6_7 11
+#define MV64x60_IRQ_P1_GPP_0_7 24
+#define MV64x60_IRQ_P1_GPP_8_15 25
+#define MV64x60_IRQ_P1_GPP_16_23 26
+#define MV64x60_IRQ_P1_GPP_24_31 27
+#define MV64x60_IRQ_DOORBELL 28
+#define MV64x60_IRQ_ETH_0 32
+#define MV64x60_IRQ_ETH_1 33
+#define MV64x60_IRQ_ETH_2 34
+#define MV64x60_IRQ_SDMA_0 36
+#define MV64x60_IRQ_I2C 37
+#define MV64x60_IRQ_BRG 39
+#define MV64x60_IRQ_MPSC_0 40
+#define MV64x60_IRQ_MPSC_1 42
+#define MV64x60_IRQ_COMM 43
+#define MV64x60_IRQ_P0_GPP_0_7 56
+#define MV64x60_IRQ_P0_GPP_8_15 57
+#define MV64x60_IRQ_P0_GPP_16_23 58
+#define MV64x60_IRQ_P0_GPP_24_31 59
+
+#define MV64360_IRQ_PCI0 12
+#define MV64360_IRQ_SRAM_PAR_ERR 13
+#define MV64360_IRQ_PCI1 16
+#define MV64360_IRQ_SDMA_1 38
+
+#define MV64x60_IRQ_GPP0 64
+#define MV64x60_IRQ_GPP1 65
+#define MV64x60_IRQ_GPP2 66
+#define MV64x60_IRQ_GPP3 67
+#define MV64x60_IRQ_GPP4 68
+#define MV64x60_IRQ_GPP5 69
+#define MV64x60_IRQ_GPP6 70
+#define MV64x60_IRQ_GPP7 71
+#define MV64x60_IRQ_GPP8 72
+#define MV64x60_IRQ_GPP9 73
+#define MV64x60_IRQ_GPP10 74
+#define MV64x60_IRQ_GPP11 75
+#define MV64x60_IRQ_GPP12 76
+#define MV64x60_IRQ_GPP13 77
+#define MV64x60_IRQ_GPP14 78
+#define MV64x60_IRQ_GPP15 79
+#define MV64x60_IRQ_GPP16 80
+#define MV64x60_IRQ_GPP17 81
+#define MV64x60_IRQ_GPP18 82
+#define MV64x60_IRQ_GPP19 83
+#define MV64x60_IRQ_GPP20 84
+#define MV64x60_IRQ_GPP21 85
+#define MV64x60_IRQ_GPP22 86
+#define MV64x60_IRQ_GPP23 87
+#define MV64x60_IRQ_GPP24 88
+#define MV64x60_IRQ_GPP25 89
+#define MV64x60_IRQ_GPP26 90
+#define MV64x60_IRQ_GPP27 91
+#define MV64x60_IRQ_GPP28 92
+#define MV64x60_IRQ_GPP29 93
+#define MV64x60_IRQ_GPP30 94
+#define MV64x60_IRQ_GPP31 95
+
+/* Offsets for register blocks */
+#define GT64260_ENET_PHY_ADDR 0x2000
+#define GT64260_ENET_ESMIR 0x2010
+#define GT64260_ENET_0_OFFSET 0x2400
+#define GT64260_ENET_1_OFFSET 0x2800
+#define GT64260_ENET_2_OFFSET 0x2c00
+#define MV64x60_SDMA_0_OFFSET 0x4000
+#define MV64x60_SDMA_1_OFFSET 0x6000
+#define MV64x60_MPSC_0_OFFSET 0x8000
+#define MV64x60_MPSC_1_OFFSET 0x9000
+#define MV64x60_MPSC_ROUTING_OFFSET 0xb400
+#define MV64x60_SDMA_INTR_OFFSET 0xb800
+#define MV64x60_BRG_0_OFFSET 0xb200
+#define MV64x60_BRG_1_OFFSET 0xb208
+
+/*
+ *****************************************************************************
+ *
+ * CPU Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* CPU physical address of bridge's registers */
+#define MV64x60_INTERNAL_SPACE_DECODE 0x0068
+#define MV64x60_INTERNAL_SPACE_SIZE 0x10000
+#define MV64x60_INTERNAL_SPACE_DEFAULT_ADDR 0x14000000
+
+#define MV64360_CPU_BAR_ENABLE 0x0278
+
+/* CPU Memory Controller Window Registers (4 windows) */
+#define MV64x60_CPU2MEM_WINDOWS 4
+
+#define MV64x60_CPU2MEM_0_BASE 0x0008
+#define MV64x60_CPU2MEM_0_SIZE 0x0010
+#define MV64x60_CPU2MEM_1_BASE 0x0208
+#define MV64x60_CPU2MEM_1_SIZE 0x0210
+#define MV64x60_CPU2MEM_2_BASE 0x0018
+#define MV64x60_CPU2MEM_2_SIZE 0x0020
+#define MV64x60_CPU2MEM_3_BASE 0x0218
+#define MV64x60_CPU2MEM_3_SIZE 0x0220
+
+/* CPU Device Controller Window Registers (4 windows) */
+#define MV64x60_CPU2DEV_WINDOWS 4
+
+#define MV64x60_CPU2DEV_0_BASE 0x0028
+#define MV64x60_CPU2DEV_0_SIZE 0x0030
+#define MV64x60_CPU2DEV_1_BASE 0x0228
+#define MV64x60_CPU2DEV_1_SIZE 0x0230
+#define MV64x60_CPU2DEV_2_BASE 0x0248
+#define MV64x60_CPU2DEV_2_SIZE 0x0250
+#define MV64x60_CPU2DEV_3_BASE 0x0038
+#define MV64x60_CPU2DEV_3_SIZE 0x0040
+
+#define MV64x60_CPU2BOOT_0_BASE 0x0238
+#define MV64x60_CPU2BOOT_0_SIZE 0x0240
+
+#define MV64360_CPU2SRAM_BASE 0x0268
+
+/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */
+#define MV64x60_PCI_BUSES 2
+#define MV64x60_PCI_IO_WINDOWS_PER_BUS 1
+#define MV64x60_PCI_MEM_WINDOWS_PER_BUS 4
+
+#define MV64x60_CPU2PCI_SWAP_BYTE 0x00000000
+#define MV64x60_CPU2PCI_SWAP_NONE 0x01000000
+#define MV64x60_CPU2PCI_SWAP_BYTE_WORD 0x02000000
+#define MV64x60_CPU2PCI_SWAP_WORD 0x03000000
+
+#define MV64x60_CPU2PCI_MEM_REQ64 (1<<27)
+
+#define MV64x60_CPU2PCI0_IO_BASE 0x0048
+#define MV64x60_CPU2PCI0_IO_SIZE 0x0050
+#define MV64x60_CPU2PCI0_MEM_0_BASE 0x0058
+#define MV64x60_CPU2PCI0_MEM_0_SIZE 0x0060
+#define MV64x60_CPU2PCI0_MEM_1_BASE 0x0080
+#define MV64x60_CPU2PCI0_MEM_1_SIZE 0x0088
+#define MV64x60_CPU2PCI0_MEM_2_BASE 0x0258
+#define MV64x60_CPU2PCI0_MEM_2_SIZE 0x0260
+#define MV64x60_CPU2PCI0_MEM_3_BASE 0x0280
+#define MV64x60_CPU2PCI0_MEM_3_SIZE 0x0288
+
+#define MV64x60_CPU2PCI0_IO_REMAP 0x00f0
+#define MV64x60_CPU2PCI0_MEM_0_REMAP_LO 0x00f8
+#define MV64x60_CPU2PCI0_MEM_0_REMAP_HI 0x0320
+#define MV64x60_CPU2PCI0_MEM_1_REMAP_LO 0x0100
+#define MV64x60_CPU2PCI0_MEM_1_REMAP_HI 0x0328
+#define MV64x60_CPU2PCI0_MEM_2_REMAP_LO 0x02f8
+#define MV64x60_CPU2PCI0_MEM_2_REMAP_HI 0x0330
+#define MV64x60_CPU2PCI0_MEM_3_REMAP_LO 0x0300
+#define MV64x60_CPU2PCI0_MEM_3_REMAP_HI 0x0338
+
+#define MV64x60_CPU2PCI1_IO_BASE 0x0090
+#define MV64x60_CPU2PCI1_IO_SIZE 0x0098
+#define MV64x60_CPU2PCI1_MEM_0_BASE 0x00a0
+#define MV64x60_CPU2PCI1_MEM_0_SIZE 0x00a8
+#define MV64x60_CPU2PCI1_MEM_1_BASE 0x00b0
+#define MV64x60_CPU2PCI1_MEM_1_SIZE 0x00b8
+#define MV64x60_CPU2PCI1_MEM_2_BASE 0x02a0
+#define MV64x60_CPU2PCI1_MEM_2_SIZE 0x02a8
+#define MV64x60_CPU2PCI1_MEM_3_BASE 0x02b0
+#define MV64x60_CPU2PCI1_MEM_3_SIZE 0x02b8
+
+#define MV64x60_CPU2PCI1_IO_REMAP 0x0108
+#define MV64x60_CPU2PCI1_MEM_0_REMAP_LO 0x0110
+#define MV64x60_CPU2PCI1_MEM_0_REMAP_HI 0x0340
+#define MV64x60_CPU2PCI1_MEM_1_REMAP_LO 0x0118
+#define MV64x60_CPU2PCI1_MEM_1_REMAP_HI 0x0348
+#define MV64x60_CPU2PCI1_MEM_2_REMAP_LO 0x0310
+#define MV64x60_CPU2PCI1_MEM_2_REMAP_HI 0x0350
+#define MV64x60_CPU2PCI1_MEM_3_REMAP_LO 0x0318
+#define MV64x60_CPU2PCI1_MEM_3_REMAP_HI 0x0358
+
+/* CPU Control Registers */
+#define MV64x60_CPU_CONFIG 0x0000
+#define MV64x60_CPU_MODE 0x0120
+#define MV64x60_CPU_MASTER_CNTL 0x0160
+#define MV64x60_CPU_XBAR_CNTL_LO 0x0150
+#define MV64x60_CPU_XBAR_CNTL_HI 0x0158
+#define MV64x60_CPU_XBAR_TO 0x0168
+
+#define GT64260_CPU_RR_XBAR_CNTL_LO 0x0170
+#define GT64260_CPU_RR_XBAR_CNTL_HI 0x0178
+
+#define MV64360_CPU_PADS_CALIBRATION 0x03b4
+#define MV64360_CPU_RESET_SAMPLE_LO 0x03c4
+#define MV64360_CPU_RESET_SAMPLE_HI 0x03d4
+
+/* SMP Register Map */
+#define MV64360_WHO_AM_I 0x0200
+#define MV64360_CPU0_DOORBELL 0x0214
+#define MV64360_CPU0_DOORBELL_CLR 0x021c
+#define MV64360_CPU0_DOORBELL_MASK 0x0234
+#define MV64360_CPU1_DOORBELL 0x0224
+#define MV64360_CPU1_DOORBELL_CLR 0x022c
+#define MV64360_CPU1_DOORBELL_MASK 0x023c
+#define MV64360_CPUx_DOORBELL(x) (0x0214 + ((x)*0x10))
+#define MV64360_CPUx_DOORBELL_CLR(x) (0x021c + ((x)*0x10))
+#define MV64360_CPUx_DOORBELL_MASK(x) (0x0234 + ((x)*0x08))
+#define MV64360_SEMAPHORE_0 0x0244
+#define MV64360_SEMAPHORE_1 0x024c
+#define MV64360_SEMAPHORE_2 0x0254
+#define MV64360_SEMAPHORE_3 0x025c
+#define MV64360_SEMAPHORE_4 0x0264
+#define MV64360_SEMAPHORE_5 0x026c
+#define MV64360_SEMAPHORE_6 0x0274
+#define MV64360_SEMAPHORE_7 0x027c
+
+/* CPU Sync Barrier Registers */
+#define GT64260_CPU_SYNC_BARRIER_PCI0 0x00c0
+#define GT64260_CPU_SYNC_BARRIER_PCI1 0x00c8
+
+#define MV64360_CPU0_SYNC_BARRIER_TRIG 0x00c0
+#define MV64360_CPU0_SYNC_BARRIER_VIRT 0x00c8
+#define MV64360_CPU1_SYNC_BARRIER_TRIG 0x00d0
+#define MV64360_CPU1_SYNC_BARRIER_VIRT 0x00d8
+
+/* CPU Deadlock and Ordering registers (Rev B part only) */
+#define GT64260_CPU_DEADLOCK_ORDERING 0x02d0
+#define GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH 0x02d8
+#define GT64260_CPU_COUNTERS_SYNC_BARRIER_ATTRIBUTE 0x02e0
+
+/* CPU Access Protection Registers (gt64260 realy has 8 but don't need) */
+#define MV64x260_CPU_PROT_WINDOWS 4
+
+#define GT64260_CPU_PROT_ACCPROTECT (1<<16)
+#define GT64260_CPU_PROT_WRPROTECT (1<<17)
+#define GT64260_CPU_PROT_CACHEPROTECT (1<<18)
+
+#define MV64360_CPU_PROT_ACCPROTECT (1<<20)
+#define MV64360_CPU_PROT_WRPROTECT (1<<21)
+#define MV64360_CPU_PROT_CACHEPROTECT (1<<22)
+#define MV64360_CPU_PROT_WIN_ENABLE (1<<31)
+
+#define MV64x60_CPU_PROT_BASE_0 0x0180
+#define MV64x60_CPU_PROT_SIZE_0 0x0188
+#define MV64x60_CPU_PROT_BASE_1 0x0190
+#define MV64x60_CPU_PROT_SIZE_1 0x0198
+#define MV64x60_CPU_PROT_BASE_2 0x01a0
+#define MV64x60_CPU_PROT_SIZE_2 0x01a8
+#define MV64x60_CPU_PROT_BASE_3 0x01b0
+#define MV64x60_CPU_PROT_SIZE_3 0x01b8
+
+#define GT64260_CPU_PROT_BASE_4 0x01c0
+#define GT64260_CPU_PROT_SIZE_4 0x01c8
+#define GT64260_CPU_PROT_BASE_5 0x01d0
+#define GT64260_CPU_PROT_SIZE_5 0x01d8
+#define GT64260_CPU_PROT_BASE_6 0x01e0
+#define GT64260_CPU_PROT_SIZE_6 0x01e8
+#define GT64260_CPU_PROT_BASE_7 0x01f0
+#define GT64260_CPU_PROT_SIZE_7 0x01f8
+
+/* CPU Snoop Control Registers (64260 only) */
+#define GT64260_CPU_SNOOP_WINDOWS 4
+
+#define GT64260_CPU_SNOOP_NONE 0x00000000
+#define GT64260_CPU_SNOOP_WT 0x00010000
+#define GT64260_CPU_SNOOP_WB 0x00020000
+#define GT64260_CPU_SNOOP_MASK 0x00030000
+#define GT64260_CPU_SNOOP_ALL_BITS GT64260_CPU_SNOOP_MASK
+
+#define GT64260_CPU_SNOOP_BASE_0 0x0380
+#define GT64260_CPU_SNOOP_SIZE_0 0x0388
+#define GT64260_CPU_SNOOP_BASE_1 0x0390
+#define GT64260_CPU_SNOOP_SIZE_1 0x0398
+#define GT64260_CPU_SNOOP_BASE_2 0x03a0
+#define GT64260_CPU_SNOOP_SIZE_2 0x03a8
+#define GT64260_CPU_SNOOP_BASE_3 0x03b0
+#define GT64260_CPU_SNOOP_SIZE_3 0x03b8
+
+/* CPU Snoop Control Registers (64360 only) */
+#define MV64360_CPU_SNOOP_WINDOWS 4
+#define MV64360_CPU_SNOOP_NONE 0x00000000
+#define MV64360_CPU_SNOOP_WT 0x00010000
+#define MV64360_CPU_SNOOP_WB 0x00020000
+#define MV64360_CPU_SNOOP_MASK 0x00030000
+#define MV64360_CPU_SNOOP_ALL_BITS MV64360_CPU_SNOOP_MASK
+
+
+/* CPU Error Report Registers */
+#define MV64x60_CPU_ERR_ADDR_LO 0x0070
+#define MV64x60_CPU_ERR_ADDR_HI 0x0078
+#define MV64x60_CPU_ERR_DATA_LO 0x0128
+#define MV64x60_CPU_ERR_DATA_HI 0x0130
+#define MV64x60_CPU_ERR_PARITY 0x0138
+#define MV64x60_CPU_ERR_CAUSE 0x0140
+#define MV64x60_CPU_ERR_MASK 0x0148
+
+/*
+ *****************************************************************************
+ *
+ * SRAM Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+#define MV64360_SRAM_CONFIG 0x0380
+#define MV64360_SRAM_TEST_MODE 0x03f4
+#define MV64360_SRAM_ERR_CAUSE 0x0388
+#define MV64360_SRAM_ERR_ADDR_LO 0x0390
+#define MV64360_SRAM_ERR_ADDR_HI 0x03f8
+#define MV64360_SRAM_ERR_DATA_LO 0x0398
+#define MV64360_SRAM_ERR_DATA_HI 0x03a0
+#define MV64360_SRAM_ERR_PARITY 0x03a8
+
+#define MV64360_SRAM_SIZE 0x00040000 /* 2Mb/256KB SRAM */
+
+/*
+ *****************************************************************************
+ *
+ * SDRAM/MEM Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+/* SDRAM Config Registers (64260) */
+#define GT64260_SDRAM_CONFIG 0x0448
+
+/* SDRAM Error Report Registers (64260) */
+#define GT64260_SDRAM_ERR_DATA_LO 0x0484
+#define GT64260_SDRAM_ERR_DATA_HI 0x0480
+#define GT64260_SDRAM_ERR_ADDR 0x0490
+#define GT64260_SDRAM_ERR_ECC_RCVD 0x0488
+#define GT64260_SDRAM_ERR_ECC_CALC 0x048c
+#define GT64260_SDRAM_ERR_ECC_CNTL 0x0494
+#define GT64260_SDRAM_ERR_ECC_ERR_CNT 0x0498
+
+/* SDRAM Config Registers (64360) */
+#define MV64360_SDRAM_CONFIG 0x1400
+
+/* SDRAM Control Registers */
+#define MV64360_D_UNIT_CONTROL_LOW 0x1404
+#define MV64360_D_UNIT_CONTROL_HIGH 0x1424
+
+/* SDRAM Error Report Registers (64360) */
+#define MV64360_SDRAM_ERR_DATA_LO 0x1444
+#define MV64360_SDRAM_ERR_DATA_HI 0x1440
+#define MV64360_SDRAM_ERR_ADDR 0x1450
+#define MV64360_SDRAM_ERR_ECC_RCVD 0x1448
+#define MV64360_SDRAM_ERR_ECC_CALC 0x144c
+#define MV64360_SDRAM_ERR_ECC_CNTL 0x1454
+#define MV64360_SDRAM_ERR_ECC_ERR_CNT 0x1458
+
+/*
+ *****************************************************************************
+ *
+ * Device/BOOT Cotnroller Registers
+ *
+ *****************************************************************************
+ */
+
+/* Device Control Registers */
+#define MV64x60_DEV_BANK_PARAMS_0 0x045c
+#define MV64x60_DEV_BANK_PARAMS_1 0x0460
+#define MV64x60_DEV_BANK_PARAMS_2 0x0464
+#define MV64x60_DEV_BANK_PARAMS_3 0x0468
+#define MV64x60_DEV_BOOT_PARAMS 0x046c
+#define MV64x60_DEV_IF_CNTL 0x04c0
+#define MV64x60_DEV_IF_XBAR_CNTL_LO 0x04c8
+#define MV64x60_DEV_IF_XBAR_CNTL_HI 0x04cc
+#define MV64x60_DEV_IF_XBAR_CNTL_TO 0x04c4
+
+/* Device Interrupt Registers */
+#define MV64x60_DEV_INTR_CAUSE 0x04d0
+#define MV64x60_DEV_INTR_MASK 0x04d4
+#define MV64x60_DEV_INTR_ERR_ADDR 0x04d8
+
+#define MV64360_DEV_INTR_ERR_DATA 0x04dc
+#define MV64360_DEV_INTR_ERR_PAR 0x04e0
+
+/*
+ *****************************************************************************
+ *
+ * PCI Bridge Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* PCI Configuration Access Registers */
+#define MV64x60_PCI0_CONFIG_ADDR 0x0cf8
+#define MV64x60_PCI0_CONFIG_DATA 0x0cfc
+#define MV64x60_PCI0_IACK 0x0c34
+
+#define MV64x60_PCI1_CONFIG_ADDR 0x0c78
+#define MV64x60_PCI1_CONFIG_DATA 0x0c7c
+#define MV64x60_PCI1_IACK 0x0cb4
+
+/* PCI Control Registers */
+#define MV64x60_PCI0_CMD 0x0c00
+#define MV64x60_PCI0_MODE 0x0d00
+#define MV64x60_PCI0_TO_RETRY 0x0c04
+#define MV64x60_PCI0_RD_BUF_DISCARD_TIMER 0x0d04
+#define MV64x60_PCI0_MSI_TRIGGER_TIMER 0x0c38
+#define MV64x60_PCI0_ARBITER_CNTL 0x1d00
+#define MV64x60_PCI0_XBAR_CNTL_LO 0x1d08
+#define MV64x60_PCI0_XBAR_CNTL_HI 0x1d0c
+#define MV64x60_PCI0_XBAR_CNTL_TO 0x1d04
+#define MV64x60_PCI0_RD_RESP_XBAR_CNTL_LO 0x1d18
+#define MV64x60_PCI0_RD_RESP_XBAR_CNTL_HI 0x1d1c
+#define MV64x60_PCI0_SYNC_BARRIER 0x1d10
+#define MV64x60_PCI0_P2P_CONFIG 0x1d14
+#define MV64x60_PCI0_INTR_MASK
+
+#define GT64260_PCI0_P2P_SWAP_CNTL 0x1d54
+
+#define MV64x60_PCI1_CMD 0x0c80
+#define MV64x60_PCI1_MODE 0x0d80
+#define MV64x60_PCI1_TO_RETRY 0x0c84
+#define MV64x60_PCI1_RD_BUF_DISCARD_TIMER 0x0d84
+#define MV64x60_PCI1_MSI_TRIGGER_TIMER 0x0cb8
+#define MV64x60_PCI1_ARBITER_CNTL 0x1d80
+#define MV64x60_PCI1_XBAR_CNTL_LO 0x1d88
+#define MV64x60_PCI1_XBAR_CNTL_HI 0x1d8c
+#define MV64x60_PCI1_XBAR_CNTL_TO 0x1d84
+#define MV64x60_PCI1_RD_RESP_XBAR_CNTL_LO 0x1d98
+#define MV64x60_PCI1_RD_RESP_XBAR_CNTL_HI 0x1d9c
+#define MV64x60_PCI1_SYNC_BARRIER 0x1d90
+#define MV64x60_PCI1_P2P_CONFIG 0x1d94
+
+#define GT64260_PCI1_P2P_SWAP_CNTL 0x1dd4
+
+/* Different modes that the pci hoses can be in (bits 5:4 in PCI Mode reg) */
+#define MV64x60_PCIMODE_CONVENTIONAL 0
+#define MV64x60_PCIMODE_PCIX_66 (1 << 4)
+#define MV64x60_PCIMODE_PCIX_100 (2 << 4)
+#define MV64x60_PCIMODE_PCIX_133 (3 << 4)
+#define MV64x60_PCIMODE_MASK (0x3 << 4)
+
+/* PCI Access Control Regions Registers */
+#define GT64260_PCI_ACC_CNTL_PREFETCHEN (1<<12)
+#define GT64260_PCI_ACC_CNTL_DREADEN (1<<13)
+#define GT64260_PCI_ACC_CNTL_RDPREFETCH (1<<16)
+#define GT64260_PCI_ACC_CNTL_RDLINEPREFETCH (1<<17)
+#define GT64260_PCI_ACC_CNTL_RDMULPREFETCH (1<<18)
+#define GT64260_PCI_ACC_CNTL_MBURST_32_BTYES 0x00000000
+#define GT64260_PCI_ACC_CNTL_MBURST_64_BYTES 0x00100000
+#define GT64260_PCI_ACC_CNTL_MBURST_128_BYTES 0x00200000
+#define GT64260_PCI_ACC_CNTL_MBURST_MASK 0x00300000
+#define GT64260_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
+#define GT64260_PCI_ACC_CNTL_SWAP_NONE 0x01000000
+#define GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x02000000
+#define GT64260_PCI_ACC_CNTL_SWAP_WORD 0x03000000
+#define GT64260_PCI_ACC_CNTL_SWAP_MASK 0x03000000
+#define GT64260_PCI_ACC_CNTL_ACCPROT (1<<28)
+#define GT64260_PCI_ACC_CNTL_WRPROT (1<<29)
+
+#define GT64260_PCI_ACC_CNTL_ALL_BITS (GT64260_PCI_ACC_CNTL_PREFETCHEN | \
+ GT64260_PCI_ACC_CNTL_DREADEN | \
+ GT64260_PCI_ACC_CNTL_RDPREFETCH | \
+ GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\
+ GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \
+ GT64260_PCI_ACC_CNTL_MBURST_MASK | \
+ GT64260_PCI_ACC_CNTL_SWAP_MASK | \
+ GT64260_PCI_ACC_CNTL_ACCPROT| \
+ GT64260_PCI_ACC_CNTL_WRPROT)
+
+#define MV64360_PCI_ACC_CNTL_ENABLE (1<<0)
+#define MV64360_PCI_ACC_CNTL_REQ64 (1<<1)
+#define MV64360_PCI_ACC_CNTL_SNOOP_NONE 0x00000000
+#define MV64360_PCI_ACC_CNTL_SNOOP_WT 0x00000004
+#define MV64360_PCI_ACC_CNTL_SNOOP_WB 0x00000008
+#define MV64360_PCI_ACC_CNTL_SNOOP_MASK 0x0000000c
+#define MV64360_PCI_ACC_CNTL_ACCPROT (1<<4)
+#define MV64360_PCI_ACC_CNTL_WRPROT (1<<5)
+#define MV64360_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
+#define MV64360_PCI_ACC_CNTL_SWAP_NONE 0x00000040
+#define MV64360_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x00000080
+#define MV64360_PCI_ACC_CNTL_SWAP_WORD 0x000000c0
+#define MV64360_PCI_ACC_CNTL_SWAP_MASK 0x000000c0
+#define MV64360_PCI_ACC_CNTL_MBURST_32_BYTES 0x00000000
+#define MV64360_PCI_ACC_CNTL_MBURST_64_BYTES 0x00000100
+#define MV64360_PCI_ACC_CNTL_MBURST_128_BYTES 0x00000200
+#define MV64360_PCI_ACC_CNTL_MBURST_MASK 0x00000300
+#define MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES 0x00000000
+#define MV64360_PCI_ACC_CNTL_RDSIZE_64_BYTES 0x00000400
+#define MV64360_PCI_ACC_CNTL_RDSIZE_128_BYTES 0x00000800
+#define MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES 0x00000c00
+#define MV64360_PCI_ACC_CNTL_RDSIZE_MASK 0x00000c00
+
+#define MV64360_PCI_ACC_CNTL_ALL_BITS (MV64360_PCI_ACC_CNTL_ENABLE | \
+ MV64360_PCI_ACC_CNTL_REQ64 | \
+ MV64360_PCI_ACC_CNTL_SNOOP_MASK | \
+ MV64360_PCI_ACC_CNTL_ACCPROT | \
+ MV64360_PCI_ACC_CNTL_WRPROT | \
+ MV64360_PCI_ACC_CNTL_SWAP_MASK | \
+ MV64360_PCI_ACC_CNTL_MBURST_MASK | \
+ MV64360_PCI_ACC_CNTL_RDSIZE_MASK)
+
+#define MV64x60_PCI0_ACC_CNTL_0_BASE_LO 0x1e00
+#define MV64x60_PCI0_ACC_CNTL_0_BASE_HI 0x1e04
+#define MV64x60_PCI0_ACC_CNTL_0_SIZE 0x1e08
+#define MV64x60_PCI0_ACC_CNTL_1_BASE_LO 0x1e10
+#define MV64x60_PCI0_ACC_CNTL_1_BASE_HI 0x1e14
+#define MV64x60_PCI0_ACC_CNTL_1_SIZE 0x1e18
+#define MV64x60_PCI0_ACC_CNTL_2_BASE_LO 0x1e20
+#define MV64x60_PCI0_ACC_CNTL_2_BASE_HI 0x1e24
+#define MV64x60_PCI0_ACC_CNTL_2_SIZE 0x1e28
+#define MV64x60_PCI0_ACC_CNTL_3_BASE_LO 0x1e30
+#define MV64x60_PCI0_ACC_CNTL_3_BASE_HI 0x1e34
+#define MV64x60_PCI0_ACC_CNTL_3_SIZE 0x1e38
+#define MV64x60_PCI0_ACC_CNTL_4_BASE_LO 0x1e40
+#define MV64x60_PCI0_ACC_CNTL_4_BASE_HI 0x1e44
+#define MV64x60_PCI0_ACC_CNTL_4_SIZE 0x1e48
+#define MV64x60_PCI0_ACC_CNTL_5_BASE_LO 0x1e50
+#define MV64x60_PCI0_ACC_CNTL_5_BASE_HI 0x1e54
+#define MV64x60_PCI0_ACC_CNTL_5_SIZE 0x1e58
+
+#define GT64260_PCI0_ACC_CNTL_6_BASE_LO 0x1e60
+#define GT64260_PCI0_ACC_CNTL_6_BASE_HI 0x1e64
+#define GT64260_PCI0_ACC_CNTL_6_SIZE 0x1e68
+#define GT64260_PCI0_ACC_CNTL_7_BASE_LO 0x1e70
+#define GT64260_PCI0_ACC_CNTL_7_BASE_HI 0x1e74
+#define GT64260_PCI0_ACC_CNTL_7_SIZE 0x1e78
+
+#define MV64x60_PCI1_ACC_CNTL_0_BASE_LO 0x1e80
+#define MV64x60_PCI1_ACC_CNTL_0_BASE_HI 0x1e84
+#define MV64x60_PCI1_ACC_CNTL_0_SIZE 0x1e88
+#define MV64x60_PCI1_ACC_CNTL_1_BASE_LO 0x1e90
+#define MV64x60_PCI1_ACC_CNTL_1_BASE_HI 0x1e94
+#define MV64x60_PCI1_ACC_CNTL_1_SIZE 0x1e98
+#define MV64x60_PCI1_ACC_CNTL_2_BASE_LO 0x1ea0
+#define MV64x60_PCI1_ACC_CNTL_2_BASE_HI 0x1ea4
+#define MV64x60_PCI1_ACC_CNTL_2_SIZE 0x1ea8
+#define MV64x60_PCI1_ACC_CNTL_3_BASE_LO 0x1eb0
+#define MV64x60_PCI1_ACC_CNTL_3_BASE_HI 0x1eb4
+#define MV64x60_PCI1_ACC_CNTL_3_SIZE 0x1eb8
+#define MV64x60_PCI1_ACC_CNTL_4_BASE_LO 0x1ec0
+#define MV64x60_PCI1_ACC_CNTL_4_BASE_HI 0x1ec4
+#define MV64x60_PCI1_ACC_CNTL_4_SIZE 0x1ec8
+#define MV64x60_PCI1_ACC_CNTL_5_BASE_LO 0x1ed0
+#define MV64x60_PCI1_ACC_CNTL_5_BASE_HI 0x1ed4
+#define MV64x60_PCI1_ACC_CNTL_5_SIZE 0x1ed8
+
+#define GT64260_PCI1_ACC_CNTL_6_BASE_LO 0x1ee0
+#define GT64260_PCI1_ACC_CNTL_6_BASE_HI 0x1ee4
+#define GT64260_PCI1_ACC_CNTL_6_SIZE 0x1ee8
+#define GT64260_PCI1_ACC_CNTL_7_BASE_LO 0x1ef0
+#define GT64260_PCI1_ACC_CNTL_7_BASE_HI 0x1ef4
+#define GT64260_PCI1_ACC_CNTL_7_SIZE 0x1ef8
+
+/* PCI Snoop Control Registers (64260 only) */
+#define GT64260_PCI_SNOOP_NONE 0x00000000
+#define GT64260_PCI_SNOOP_WT 0x00001000
+#define GT64260_PCI_SNOOP_WB 0x00002000
+
+#define GT64260_PCI0_SNOOP_0_BASE_LO 0x1f00
+#define GT64260_PCI0_SNOOP_0_BASE_HI 0x1f04
+#define GT64260_PCI0_SNOOP_0_SIZE 0x1f08
+#define GT64260_PCI0_SNOOP_1_BASE_LO 0x1f10
+#define GT64260_PCI0_SNOOP_1_BASE_HI 0x1f14
+#define GT64260_PCI0_SNOOP_1_SIZE 0x1f18
+#define GT64260_PCI0_SNOOP_2_BASE_LO 0x1f20
+#define GT64260_PCI0_SNOOP_2_BASE_HI 0x1f24
+#define GT64260_PCI0_SNOOP_2_SIZE 0x1f28
+#define GT64260_PCI0_SNOOP_3_BASE_LO 0x1f30
+#define GT64260_PCI0_SNOOP_3_BASE_HI 0x1f34
+#define GT64260_PCI0_SNOOP_3_SIZE 0x1f38
+
+#define GT64260_PCI1_SNOOP_0_BASE_LO 0x1f80
+#define GT64260_PCI1_SNOOP_0_BASE_HI 0x1f84
+#define GT64260_PCI1_SNOOP_0_SIZE 0x1f88
+#define GT64260_PCI1_SNOOP_1_BASE_LO 0x1f90
+#define GT64260_PCI1_SNOOP_1_BASE_HI 0x1f94
+#define GT64260_PCI1_SNOOP_1_SIZE 0x1f98
+#define GT64260_PCI1_SNOOP_2_BASE_LO 0x1fa0
+#define GT64260_PCI1_SNOOP_2_BASE_HI 0x1fa4
+#define GT64260_PCI1_SNOOP_2_SIZE 0x1fa8
+#define GT64260_PCI1_SNOOP_3_BASE_LO 0x1fb0
+#define GT64260_PCI1_SNOOP_3_BASE_HI 0x1fb4
+#define GT64260_PCI1_SNOOP_3_SIZE 0x1fb8
+
+/* PCI Error Report Registers */
+#define MV64x60_PCI0_ERR_SERR_MASK 0x0c28
+#define MV64x60_PCI0_ERR_ADDR_LO 0x1d40
+#define MV64x60_PCI0_ERR_ADDR_HI 0x1d44
+#define MV64x60_PCI0_ERR_DATA_LO 0x1d48
+#define MV64x60_PCI0_ERR_DATA_HI 0x1d4c
+#define MV64x60_PCI0_ERR_CMD 0x1d50
+#define MV64x60_PCI0_ERR_CAUSE 0x1d58
+#define MV64x60_PCI0_ERR_MASK 0x1d5c
+
+#define MV64x60_PCI1_ERR_SERR_MASK 0x0ca8
+#define MV64x60_PCI1_ERR_ADDR_LO 0x1dc0
+#define MV64x60_PCI1_ERR_ADDR_HI 0x1dc4
+#define MV64x60_PCI1_ERR_DATA_LO 0x1dc8
+#define MV64x60_PCI1_ERR_DATA_HI 0x1dcc
+#define MV64x60_PCI1_ERR_CMD 0x1dd0
+#define MV64x60_PCI1_ERR_CAUSE 0x1dd8
+#define MV64x60_PCI1_ERR_MASK 0x1ddc
+
+/* PCI Slave Address Decoding Registers */
+#define MV64x60_PCI0_MEM_0_SIZE 0x0c08
+#define MV64x60_PCI0_MEM_1_SIZE 0x0d08
+#define MV64x60_PCI0_MEM_2_SIZE 0x0c0c
+#define MV64x60_PCI0_MEM_3_SIZE 0x0d0c
+#define MV64x60_PCI1_MEM_0_SIZE 0x0c88
+#define MV64x60_PCI1_MEM_1_SIZE 0x0d88
+#define MV64x60_PCI1_MEM_2_SIZE 0x0c8c
+#define MV64x60_PCI1_MEM_3_SIZE 0x0d8c
+
+#define MV64x60_PCI0_BAR_ENABLE 0x0c3c
+#define MV64x60_PCI1_BAR_ENABLE 0x0cbc
+
+#define MV64x60_PCI0_PCI_DECODE_CNTL 0x0d3c
+#define MV64x60_PCI1_PCI_DECODE_CNTL 0x0dbc
+
+#define MV64x60_PCI0_SLAVE_MEM_0_REMAP 0x0c48
+#define MV64x60_PCI0_SLAVE_MEM_1_REMAP 0x0d48
+#define MV64x60_PCI0_SLAVE_MEM_2_REMAP 0x0c4c
+#define MV64x60_PCI0_SLAVE_MEM_3_REMAP 0x0d4c
+#define MV64x60_PCI0_SLAVE_DEV_0_REMAP 0x0c50
+#define MV64x60_PCI0_SLAVE_DEV_1_REMAP 0x0d50
+#define MV64x60_PCI0_SLAVE_DEV_2_REMAP 0x0d58
+#define MV64x60_PCI0_SLAVE_DEV_3_REMAP 0x0c54
+#define MV64x60_PCI0_SLAVE_BOOT_REMAP 0x0d54
+#define MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_LO 0x0d5c
+#define MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_HI 0x0d60
+#define MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_LO 0x0d64
+#define MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_HI 0x0d68
+#define MV64x60_PCI0_SLAVE_P2P_IO_REMAP 0x0d6c
+#define MV64x60_PCI0_SLAVE_CPU_REMAP 0x0d70
+
+#define MV64x60_PCI1_SLAVE_MEM_0_REMAP 0x0cc8
+#define MV64x60_PCI1_SLAVE_MEM_1_REMAP 0x0dc8
+#define MV64x60_PCI1_SLAVE_MEM_2_REMAP 0x0ccc
+#define MV64x60_PCI1_SLAVE_MEM_3_REMAP 0x0dcc
+#define MV64x60_PCI1_SLAVE_DEV_0_REMAP 0x0cd0
+#define MV64x60_PCI1_SLAVE_DEV_1_REMAP 0x0dd0
+#define MV64x60_PCI1_SLAVE_DEV_2_REMAP 0x0dd8
+#define MV64x60_PCI1_SLAVE_DEV_3_REMAP 0x0cd4
+#define MV64x60_PCI1_SLAVE_BOOT_REMAP 0x0dd4
+#define MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_LO 0x0ddc
+#define MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_HI 0x0de0
+#define MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_LO 0x0de4
+#define MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_HI 0x0de8
+#define MV64x60_PCI1_SLAVE_P2P_IO_REMAP 0x0dec
+#define MV64x60_PCI1_SLAVE_CPU_REMAP 0x0df0
+
+/*
+ *****************************************************************************
+ *
+ * ENET Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* ENET Controller Window Registers (6 windows) */
+#define MV64360_ENET2MEM_WINDOWS 6
+
+#define MV64360_ENET2MEM_0_BASE 0x2200
+#define MV64360_ENET2MEM_0_SIZE 0x2204
+#define MV64360_ENET2MEM_1_BASE 0x2208
+#define MV64360_ENET2MEM_1_SIZE 0x220c
+#define MV64360_ENET2MEM_2_BASE 0x2210
+#define MV64360_ENET2MEM_2_SIZE 0x2214
+#define MV64360_ENET2MEM_3_BASE 0x2218
+#define MV64360_ENET2MEM_3_SIZE 0x221c
+#define MV64360_ENET2MEM_4_BASE 0x2220
+#define MV64360_ENET2MEM_4_SIZE 0x2224
+#define MV64360_ENET2MEM_5_BASE 0x2228
+#define MV64360_ENET2MEM_5_SIZE 0x222c
+
+#define MV64360_ENET2MEM_SNOOP_NONE 0x00000000
+#define MV64360_ENET2MEM_SNOOP_WT 0x00001000
+#define MV64360_ENET2MEM_SNOOP_WB 0x00002000
+
+#define MV64360_ENET2MEM_BAR_ENABLE 0x2290
+
+#define MV64360_ENET2MEM_ACC_PROT_0 0x2294
+#define MV64360_ENET2MEM_ACC_PROT_1 0x2298
+#define MV64360_ENET2MEM_ACC_PROT_2 0x229c
+
+/*
+ *****************************************************************************
+ *
+ * MPSC Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* MPSC Controller Window Registers (4 windows) */
+#define MV64360_MPSC2MEM_WINDOWS 4
+
+#define MV64360_MPSC2MEM_0_BASE 0xf200
+#define MV64360_MPSC2MEM_0_SIZE 0xf204
+#define MV64360_MPSC2MEM_1_BASE 0xf208
+#define MV64360_MPSC2MEM_1_SIZE 0xf20c
+#define MV64360_MPSC2MEM_2_BASE 0xf210
+#define MV64360_MPSC2MEM_2_SIZE 0xf214
+#define MV64360_MPSC2MEM_3_BASE 0xf218
+#define MV64360_MPSC2MEM_3_SIZE 0xf21c
+
+#define MV64360_MPSC_0_REMAP 0xf240
+#define MV64360_MPSC_1_REMAP 0xf244
+
+#define MV64360_MPSC2MEM_SNOOP_NONE 0x00000000
+#define MV64360_MPSC2MEM_SNOOP_WT 0x00001000
+#define MV64360_MPSC2MEM_SNOOP_WB 0x00002000
+
+#define MV64360_MPSC2MEM_BAR_ENABLE 0xf250
+
+#define MV64360_MPSC2MEM_ACC_PROT_0 0xf254
+#define MV64360_MPSC2MEM_ACC_PROT_1 0xf258
+
+#define MV64360_MPSC2REGS_BASE 0xf25c
+
+/*
+ *****************************************************************************
+ *
+ * Timer/Counter Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define MV64x60_TIMR_CNTR_0 0x0850
+#define MV64x60_TIMR_CNTR_1 0x0854
+#define MV64x60_TIMR_CNTR_2 0x0858
+#define MV64x60_TIMR_CNTR_3 0x085c
+#define MV64x60_TIMR_CNTR_0_3_CNTL 0x0864
+#define MV64x60_TIMR_CNTR_0_3_INTR_CAUSE 0x0868
+#define MV64x60_TIMR_CNTR_0_3_INTR_MASK 0x086c
+
+#define GT64260_TIMR_CNTR_4 0x0950
+#define GT64260_TIMR_CNTR_5 0x0954
+#define GT64260_TIMR_CNTR_6 0x0958
+#define GT64260_TIMR_CNTR_7 0x095c
+#define GT64260_TIMR_CNTR_4_7_CNTL 0x0964
+#define GT64260_TIMR_CNTR_4_7_INTR_CAUSE 0x0968
+#define GT64260_TIMR_CNTR_4_7_INTR_MASK 0x096c
+
+/*
+ *****************************************************************************
+ *
+ * Communications Controller
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_SER_INIT_PCI_ADDR_HI 0xf320
+#define GT64260_SER_INIT_LAST_DATA 0xf324
+#define GT64260_SER_INIT_CONTROL 0xf328
+#define GT64260_SER_INIT_STATUS 0xf32c
+
+#define MV64x60_COMM_ARBITER_CNTL 0xf300
+#define MV64x60_COMM_CONFIG 0xb40c
+#define MV64x60_COMM_XBAR_TO 0xf304
+#define MV64x60_COMM_INTR_CAUSE 0xf310
+#define MV64x60_COMM_INTR_MASK 0xf314
+#define MV64x60_COMM_ERR_ADDR 0xf318
+
+#define MV64360_COMM_ARBITER_CNTL 0xf300
+
+/*
+ *****************************************************************************
+ *
+ * IDMA Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* IDMA Controller Window Registers (8 windows) */
+#define MV64360_IDMA2MEM_WINDOWS 8
+
+#define MV64360_IDMA2MEM_0_BASE 0x0a00
+#define MV64360_IDMA2MEM_0_SIZE 0x0a04
+#define MV64360_IDMA2MEM_1_BASE 0x0a08
+#define MV64360_IDMA2MEM_1_SIZE 0x0a0c
+#define MV64360_IDMA2MEM_2_BASE 0x0a10
+#define MV64360_IDMA2MEM_2_SIZE 0x0a14
+#define MV64360_IDMA2MEM_3_BASE 0x0a18
+#define MV64360_IDMA2MEM_3_SIZE 0x0a1c
+#define MV64360_IDMA2MEM_4_BASE 0x0a20
+#define MV64360_IDMA2MEM_4_SIZE 0x0a24
+#define MV64360_IDMA2MEM_5_BASE 0x0a28
+#define MV64360_IDMA2MEM_5_SIZE 0x0a2c
+#define MV64360_IDMA2MEM_6_BASE 0x0a30
+#define MV64360_IDMA2MEM_6_SIZE 0x0a34
+#define MV64360_IDMA2MEM_7_BASE 0x0a38
+#define MV64360_IDMA2MEM_7_SIZE 0x0a3c
+
+#define MV64360_IDMA2MEM_SNOOP_NONE 0x00000000
+#define MV64360_IDMA2MEM_SNOOP_WT 0x00001000
+#define MV64360_IDMA2MEM_SNOOP_WB 0x00002000
+
+#define MV64360_IDMA2MEM_BAR_ENABLE 0x0a80
+
+#define MV64360_IDMA2MEM_ACC_PROT_0 0x0a70
+#define MV64360_IDMA2MEM_ACC_PROT_1 0x0a74
+#define MV64360_IDMA2MEM_ACC_PROT_2 0x0a78
+#define MV64360_IDMA2MEM_ACC_PROT_3 0x0a7c
+
+#define MV64x60_IDMA_0_OFFSET 0x0800
+#define MV64x60_IDMA_1_OFFSET 0x0804
+#define MV64x60_IDMA_2_OFFSET 0x0808
+#define MV64x60_IDMA_3_OFFSET 0x080c
+#define MV64x60_IDMA_4_OFFSET 0x0900
+#define MV64x60_IDMA_5_OFFSET 0x0904
+#define MV64x60_IDMA_6_OFFSET 0x0908
+#define MV64x60_IDMA_7_OFFSET 0x090c
+
+#define MV64x60_IDMA_BYTE_COUNT (0x0800 - MV64x60_IDMA_0_OFFSET)
+#define MV64x60_IDMA_SRC_ADDR (0x0810 - MV64x60_IDMA_0_OFFSET)
+#define MV64x60_IDMA_DST_ADDR (0x0820 - MV64x60_IDMA_0_OFFSET)
+#define MV64x60_IDMA_NEXT_DESC (0x0830 - MV64x60_IDMA_0_OFFSET)
+#define MV64x60_IDMA_CUR_DESC (0x0870 - MV64x60_IDMA_0_OFFSET)
+#define MV64x60_IDMA_SRC_PCI_ADDR_HI (0x0890 - MV64x60_IDMA_0_OFFSET)
+#define MV64x60_IDMA_DST_PCI_ADDR_HI (0x08a0 - MV64x60_IDMA_0_OFFSET)
+#define MV64x60_IDMA_NEXT_DESC_PCI_ADDR_HI (0x08b0 - MV64x60_IDMA_0_OFFSET)
+#define MV64x60_IDMA_CONTROL_LO (0x0840 - MV64x60_IDMA_0_OFFSET)
+#define MV64x60_IDMA_CONTROL_HI (0x0880 - MV64x60_IDMA_0_OFFSET)
+
+#define MV64x60_IDMA_0_3_ARBITER_CNTL 0x0860
+#define MV64x60_IDMA_4_7_ARBITER_CNTL 0x0960
+
+#define MV64x60_IDMA_0_3_XBAR_TO 0x08d0
+#define MV64x60_IDMA_4_7_XBAR_TO 0x09d0
+
+#define MV64x60_IDMA_0_3_INTR_CAUSE 0x08c0
+#define MV64x60_IDMA_0_3_INTR_MASK 0x08c4
+#define MV64x60_IDMA_0_3_ERROR_ADDR 0x08c8
+#define MV64x60_IDMA_0_3_ERROR_SELECT 0x08cc
+#define MV64x60_IDMA_4_7_INTR_CAUSE 0x09c0
+#define MV64x60_IDMA_4_7_INTR_MASK 0x09c4
+#define MV64x60_IDMA_4_7_ERROR_ADDR 0x09c8
+#define MV64x60_IDMA_4_7_ERROR_SELECT 0x09cc
+
+/*
+ *****************************************************************************
+ *
+ * Watchdog Timer Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define MV64x60_WDT_WDC 0xb410
+#define MV64x60_WDT_WDV 0xb414
+
+
+/*
+ *****************************************************************************
+ *
+ * General Purpose Pins Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define MV64x60_GPP_IO_CNTL 0xf100
+#define MV64x60_GPP_LEVEL_CNTL 0xf110
+#define MV64x60_GPP_VALUE 0xf104
+#define MV64x60_GPP_INTR_CAUSE 0xf108
+#define MV64x60_GPP_INTR_MASK 0xf10c
+#define MV64x60_GPP_VALUE_SET 0xf118
+#define MV64x60_GPP_VALUE_CLR 0xf11c
+
+
+/*
+ *****************************************************************************
+ *
+ * Multi-Purpose Pins Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define MV64x60_MPP_CNTL_0 0xf000
+#define MV64x60_MPP_CNTL_1 0xf004
+#define MV64x60_MPP_CNTL_2 0xf008
+#define MV64x60_MPP_CNTL_3 0xf00c
+#define GT64260_MPP_SERIAL_PORTS_MULTIPLEX 0xf010
+
+#define MV64x60_ETH_BAR_GAP 0x8
+#define MV64x60_ETH_SIZE_REG_GAP 0x8
+#define MV64x60_ETH_HIGH_ADDR_REMAP_REG_GAP 0x4
+#define MV64x60_ETH_PORT_ACCESS_CTRL_GAP 0x4
+
+#define MV64x60_EBAR_ATTR_DRAM_CS0 0x00000E00
+#define MV64x60_EBAR_ATTR_DRAM_CS1 0x00000D00
+#define MV64x60_EBAR_ATTR_DRAM_CS2 0x00000B00
+#define MV64x60_EBAR_ATTR_DRAM_CS3 0x00000700
+
+#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK0 0x00000000
+#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK1 0x00000100
+#define MV64x60_EBAR_ATTR_CBS_SRAM 0x00000000
+#define MV64x60_EBAR_ATTR_CBS_CPU_BUS 0x00000800
+
+
+/*
+ *****************************************************************************
+ *
+ * Interrupt Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define GT64260_IC_OFFSET 0x0c18
+
+#define GT64260_IC_MAIN_CAUSE_LO 0x0c18
+#define GT64260_IC_MAIN_CAUSE_HI 0x0c68
+#define GT64260_IC_CPU_INTR_MASK_LO 0x0c1c
+#define GT64260_IC_CPU_INTR_MASK_HI 0x0c6c
+#define GT64260_IC_CPU_SELECT_CAUSE 0x0c70
+#define GT64260_IC_PCI0_INTR_MASK_LO 0x0c24
+#define GT64260_IC_PCI0_INTR_MASK_HI 0x0c64
+#define GT64260_IC_PCI0_SELECT_CAUSE 0x0c74
+#define GT64260_IC_PCI1_INTR_MASK_LO 0x0ca4
+#define GT64260_IC_PCI1_INTR_MASK_HI 0x0ce4
+#define GT64260_IC_PCI1_SELECT_CAUSE 0x0cf4
+#define GT64260_IC_CPU_INT_0_MASK 0x0e60
+#define GT64260_IC_CPU_INT_1_MASK 0x0e64
+#define GT64260_IC_CPU_INT_2_MASK 0x0e68
+#define GT64260_IC_CPU_INT_3_MASK 0x0e6c
+
+#define MV64360_IC_OFFSET 0x0000
+
+#define MV64360_IC_MAIN_CAUSE_LO 0x0004
+#define MV64360_IC_MAIN_CAUSE_HI 0x000c
+#define MV64360_IC_CPU0_INTR_MASK_LO 0x0014
+#define MV64360_IC_CPU0_INTR_MASK_HI 0x001c
+#define MV64360_IC_CPU0_SELECT_CAUSE 0x0024
+#define MV64360_IC_CPU1_INTR_MASK_LO 0x0034
+#define MV64360_IC_CPU1_INTR_MASK_HI 0x003c
+#define MV64360_IC_CPU1_SELECT_CAUSE 0x0044
+#define MV64360_IC_INT0_MASK_LO 0x0054
+#define MV64360_IC_INT0_MASK_HI 0x005c
+#define MV64360_IC_INT0_SELECT_CAUSE 0x0064
+#define MV64360_IC_INT1_MASK_LO 0x0074
+#define MV64360_IC_INT1_MASK_HI 0x007c
+#define MV64360_IC_INT1_SELECT_CAUSE 0x0084
+
+#endif /* __ASMPPC_MV64x60_DEFS_H */
diff --git a/include/asm-ppc/namei.h b/include/asm-ppc/namei.h
new file mode 100644
index 0000000..29c9ec8
--- /dev/null
+++ b/include/asm-ppc/namei.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-ppc/namei.h
+ * Adapted from include/asm-alpha/namei.h
+ *
+ * Included from fs/namei.c
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_NAMEI_H
+#define __PPC_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __PPC_NAMEI_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/nvram.h b/include/asm-ppc/nvram.h
new file mode 100644
index 0000000..31ef16e
--- /dev/null
+++ b/include/asm-ppc/nvram.h
@@ -0,0 +1,73 @@
+/*
+ * PreP compliant NVRAM access
+ */
+
+#ifdef __KERNEL__
+#ifndef _PPC_NVRAM_H
+#define _PPC_NVRAM_H
+
+#define NVRAM_AS0 0x74
+#define NVRAM_AS1 0x75
+#define NVRAM_DATA 0x77
+
+
+/* RTC Offsets */
+
+#define MOTO_RTC_SECONDS 0x1FF9
+#define MOTO_RTC_MINUTES 0x1FFA
+#define MOTO_RTC_HOURS 0x1FFB
+#define MOTO_RTC_DAY_OF_WEEK 0x1FFC
+#define MOTO_RTC_DAY_OF_MONTH 0x1FFD
+#define MOTO_RTC_MONTH 0x1FFE
+#define MOTO_RTC_YEAR 0x1FFF
+#define MOTO_RTC_CONTROLA 0x1FF8
+#define MOTO_RTC_CONTROLB 0x1FF9
+
+/* PowerMac specific nvram stuffs */
+
+enum {
+ pmac_nvram_OF, /* Open Firmware partition */
+ pmac_nvram_XPRAM, /* MacOS XPRAM partition */
+ pmac_nvram_NR /* MacOS Name Registry partition */
+};
+
+/* Return partition offset in nvram */
+extern int pmac_get_partition(int partition);
+
+/* Direct access to XPRAM on PowerMacs */
+extern u8 pmac_xpram_read(int xpaddr);
+extern void pmac_xpram_write(int xpaddr, u8 data);
+
+/* Synchronize NVRAM */
+extern void nvram_sync(void);
+
+/* Normal access to NVRAM */
+extern unsigned char nvram_read_byte(int i);
+extern void nvram_write_byte(unsigned char c, int i);
+
+/* Some offsets in XPRAM */
+#define PMAC_XPRAM_MACHINE_LOC 0xe4
+#define PMAC_XPRAM_SOUND_VOLUME 0x08
+
+/* Machine location structure in PowerMac XPRAM */
+struct pmac_machine_location {
+ unsigned int latitude; /* 2+30 bit Fractional number */
+ unsigned int longitude; /* 2+30 bit Fractional number */
+ unsigned int delta; /* mix of GMT delta and DLS */
+};
+
+/*
+ * /dev/nvram ioctls
+ *
+ * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
+ * definitely obsolete. Do not use it if you can avoid it
+ */
+
+#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
+ _IOWR('p', 0x40, int)
+
+#define IOC_NVRAM_GET_OFFSET _IOWR('p', 0x42, int) /* Get NVRAM partition offset */
+#define IOC_NVRAM_SYNC _IO('p', 0x43) /* Sync NVRAM image */
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ocp.h b/include/asm-ppc/ocp.h
new file mode 100644
index 0000000..5ea44ca
--- /dev/null
+++ b/include/asm-ppc/ocp.h
@@ -0,0 +1,211 @@
+/*
+ * ocp.h
+ *
+ * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * Mipsys - France
+ *
+ * Derived from work (c) Armin Kuster akuster@pacbell.net
+ *
+ * Additional support and port to 2.6 LDM/sysfs by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * TODO: - Add get/put interface & fixup locking to provide same API for
+ * 2.4 and 2.5
+ * - Rework PM callbacks
+ */
+
+#ifdef __KERNEL__
+#ifndef __OCP_H__
+#define __OCP_H__
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/config.h>
+#include <linux/devfs_fs_kernel.h>
+#include <linux/device.h>
+
+#include <asm/mmu.h>
+#include <asm/ocp_ids.h>
+#include <asm/rwsem.h>
+#include <asm/semaphore.h>
+
+#ifdef CONFIG_PPC_OCP
+
+#define OCP_MAX_IRQS 7
+#define MAX_EMACS 4
+#define OCP_IRQ_NA -1 /* used when ocp device does not have an irq */
+#define OCP_IRQ_MUL -2 /* used for ocp devices with multiply irqs */
+#define OCP_NULL_TYPE -1 /* used to mark end of list */
+#define OCP_CPM_NA 0 /* No Clock or Power Management avaliable */
+#define OCP_PADDR_NA 0 /* No MMIO registers */
+
+#define OCP_ANY_ID (~0)
+#define OCP_ANY_INDEX -1
+
+extern struct list_head ocp_devices;
+extern struct rw_semaphore ocp_devices_sem;
+
+struct ocp_device_id {
+ unsigned int vendor, function; /* Vendor and function ID or OCP_ANY_ID */
+ unsigned long driver_data; /* Data private to the driver */
+};
+
+
+/*
+ * Static definition of an OCP device.
+ *
+ * @vendor: Vendor code. It is _STRONGLY_ discouraged to use
+ * the vendor code as a way to match a unique device,
+ * though I kept that possibility open, you should
+ * really define different function codes for different
+ * device types
+ * @function: This is the function code for this device.
+ * @index: This index is used for mapping the Nth function of a
+ * given core. This is typically used for cross-driver
+ * matching, like looking for a given MAL or ZMII from
+ * an EMAC or for getting to the proper set of DCRs.
+ * Indices are no longer magically calculated based on
+ * structure ordering, they have to be actually coded
+ * into the ocp_def to avoid any possible confusion
+ * I _STRONGLY_ (again ? wow !) encourage anybody relying
+ * on index mapping to encode the "target" index in an
+ * associated structure pointed to by "additions", see
+ * how it's done for the EMAC driver.
+ * @paddr: Device physical address (may not mean anything...)
+ * @irq: Interrupt line for this device (TODO: think about making
+ * an array with this)
+ * @pm: Currently, contains the bitmask in CPMFR DCR for the device
+ * @additions: Optionally points to a function specific structure
+ * providing additional informations for a given device
+ * instance. It's currently used by the EMAC driver for MAL
+ * channel & ZMII port mapping among others.
+ * @show: Optionally points to a function specific structure
+ * providing a sysfs show routine for additions fields.
+ */
+struct ocp_def {
+ unsigned int vendor;
+ unsigned int function;
+ int index;
+ phys_addr_t paddr;
+ int irq;
+ unsigned long pm;
+ void *additions;
+ void (*show)(struct device *);
+};
+
+
+/* Struct for a given device instance */
+struct ocp_device {
+ struct list_head link;
+ char name[80]; /* device name */
+ struct ocp_def *def; /* device definition */
+ void *drvdata; /* driver data for this device */
+ struct ocp_driver *driver;
+ u32 current_state; /* Current operating state. In ACPI-speak,
+ this is D0-D3, D0 being fully functional,
+ and D3 being off. */
+ struct device dev;
+};
+
+struct ocp_driver {
+ struct list_head node;
+ char *name;
+ const struct ocp_device_id *id_table; /* NULL if wants all devices */
+ int (*probe) (struct ocp_device *dev); /* New device inserted */
+ void (*remove) (struct ocp_device *dev); /* Device removed (NULL if not a hot-plug capable driver) */
+ int (*suspend) (struct ocp_device *dev, u32 state); /* Device suspended */
+ int (*resume) (struct ocp_device *dev); /* Device woken up */
+ struct device_driver driver;
+};
+
+#define to_ocp_dev(n) container_of(n, struct ocp_device, dev)
+#define to_ocp_drv(n) container_of(n, struct ocp_driver, driver)
+
+/* Similar to the helpers above, these manipulate per-ocp_dev
+ * driver-specific data. Currently stored as ocp_dev::ocpdev,
+ * a void pointer, but it is not present on older kernels.
+ */
+static inline void *
+ocp_get_drvdata(struct ocp_device *pdev)
+{
+ return pdev->drvdata;
+}
+
+static inline void
+ocp_set_drvdata(struct ocp_device *pdev, void *data)
+{
+ pdev->drvdata = data;
+}
+
+#if defined (CONFIG_PM)
+/*
+ * This is right for the IBM 405 and 440 but will need to be
+ * generalized if the OCP stuff gets used on other processors.
+ */
+static inline void
+ocp_force_power_off(struct ocp_device *odev)
+{
+ mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) | odev->def->pm);
+}
+
+static inline void
+ocp_force_power_on(struct ocp_device *odev)
+{
+ mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) & ~odev->def->pm);
+}
+#else
+#define ocp_force_power_off(x) (void)(x)
+#define ocp_force_power_on(x) (void)(x)
+#endif
+
+/* Register/Unregister an OCP driver */
+extern int ocp_register_driver(struct ocp_driver *drv);
+extern void ocp_unregister_driver(struct ocp_driver *drv);
+
+/* Build list of devices */
+extern int ocp_early_init(void) __init;
+
+/* Find a device by index */
+extern struct ocp_device *ocp_find_device(unsigned int vendor, unsigned int function, int index);
+
+/* Get a def by index */
+extern struct ocp_def *ocp_get_one_device(unsigned int vendor, unsigned int function, int index);
+
+/* Add a device by index */
+extern int ocp_add_one_device(struct ocp_def *def);
+
+/* Remove a device by index */
+extern int ocp_remove_one_device(unsigned int vendor, unsigned int function, int index);
+
+/* Iterate over devices and execute a routine */
+extern void ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg);
+
+/* Sysfs support */
+#define OCP_SYSFS_ADDTL(type, format, name, field) \
+static ssize_t \
+show_##name##_##field(struct device *dev, char *buf) \
+{ \
+ struct ocp_device *odev = to_ocp_dev(dev); \
+ type *add = odev->def->additions; \
+ \
+ return sprintf(buf, format, add->field); \
+} \
+static DEVICE_ATTR(name##_##field, S_IRUGO, show_##name##_##field, NULL);
+
+#ifdef CONFIG_IBM_OCP
+#include <asm/ibm_ocp.h>
+#endif
+
+#ifdef CONFIG_FSL_OCP
+#include <asm/fsl_ocp.h>
+#endif
+
+#endif /* CONFIG_PPC_OCP */
+#endif /* __OCP_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ocp_ids.h b/include/asm-ppc/ocp_ids.h
new file mode 100644
index 0000000..8ae4b31
--- /dev/null
+++ b/include/asm-ppc/ocp_ids.h
@@ -0,0 +1,73 @@
+/*
+ * ocp_ids.h
+ *
+ * OCP device ids based on the ideas from PCI
+ *
+ * The numbers below are almost completely arbitrary, and in fact
+ * strings might work better. -- paulus
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * Vender device
+ * [xxxx] [xxxx]
+ *
+ * Keep in order, please
+ */
+
+/* Vendor IDs 0x0001 - 0xFFFF copied from pci_ids.h */
+
+#define OCP_VENDOR_INVALID 0x0000
+#define OCP_VENDOR_ARM 0x0004
+#define OCP_VENDOR_FREESCALE 0x1057
+#define OCP_VENDOR_IBM 0x1014
+#define OCP_VENDOR_MOTOROLA OCP_VENDOR_FREESCALE
+#define OCP_VENDOR_XILINX 0x10ee
+#define OCP_VENDOR_UNKNOWN 0xFFFF
+
+/* device identification */
+
+/* define type */
+#define OCP_FUNC_INVALID 0x0000
+
+/* system 0x0001 - 0x001F */
+
+/* Timers 0x0020 - 0x002F */
+
+/* Serial 0x0030 - 0x006F*/
+#define OCP_FUNC_16550 0x0031
+#define OCP_FUNC_IIC 0x0032
+#define OCP_FUNC_USB 0x0033
+#define OCP_FUNC_PSC_UART 0x0034
+
+/* Memory devices 0x0090 - 0x009F */
+#define OCP_FUNC_MAL 0x0090
+#define OCP_FUNC_DMA 0x0091
+
+/* Display 0x00A0 - 0x00AF */
+
+/* Sound 0x00B0 - 0x00BF */
+
+/* Mass Storage 0x00C0 - 0xxCF */
+#define OCP_FUNC_IDE 0x00C0
+
+/* Misc 0x00D0 - 0x00DF*/
+#define OCP_FUNC_GPIO 0x00D0
+#define OCP_FUNC_ZMII 0x00D1
+#define OCP_FUNC_PERFMON 0x00D2 /* Performance Monitor */
+#define OCP_FUNC_RGMII 0x00D3
+#define OCP_FUNC_TAH 0x00D4
+#define OCP_FUNC_SEC2 0x00D5 /* Crypto/Security 2.0 */
+
+/* Network 0x0200 - 0x02FF */
+#define OCP_FUNC_EMAC 0x0200
+#define OCP_FUNC_GFAR 0x0201 /* TSEC & FEC */
+
+/* Bridge devices 0xE00 - 0xEFF */
+#define OCP_FUNC_OPB 0x0E00
+
+#define OCP_FUNC_UNKNOWN 0xFFFF
diff --git a/include/asm-ppc/of_device.h b/include/asm-ppc/of_device.h
new file mode 100644
index 0000000..14441c6
--- /dev/null
+++ b/include/asm-ppc/of_device.h
@@ -0,0 +1,74 @@
+#ifndef __OF_DEVICE_H__
+#define __OF_DEVICE_H__
+
+#include <linux/device.h>
+#include <asm/prom.h>
+
+/*
+ * The of_platform_bus_type is a bus type used by drivers that do not
+ * attach to a macio or similar bus but still use OF probing
+ * mecanism
+ */
+extern struct bus_type of_platform_bus_type;
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties
+ */
+struct of_device
+{
+ struct device_node *node; /* OF device node */
+ u64 dma_mask; /* DMA mask */
+ struct device dev; /* Generic device interface */
+};
+#define to_of_device(d) container_of(d, struct of_device, dev)
+
+/*
+ * Struct used for matching a device
+ */
+struct of_match
+{
+ char *name;
+ char *type;
+ char *compatible;
+ void *data;
+};
+#define OF_ANY_MATCH ((char *)-1L)
+
+extern const struct of_match *of_match_device(
+ const struct of_match *matches, const struct of_device *dev);
+
+extern struct of_device *of_dev_get(struct of_device *dev);
+extern void of_dev_put(struct of_device *dev);
+
+/*
+ * An of_platform_driver driver is attached to a basic of_device on
+ * the "platform bus" (of_platform_bus_type)
+ */
+struct of_platform_driver
+{
+ char *name;
+ struct of_match *match_table;
+ struct module *owner;
+
+ int (*probe)(struct of_device* dev, const struct of_match *match);
+ int (*remove)(struct of_device* dev);
+
+ int (*suspend)(struct of_device* dev, u32 state);
+ int (*resume)(struct of_device* dev);
+ int (*shutdown)(struct of_device* dev);
+
+ struct device_driver driver;
+};
+#define to_of_platform_driver(drv) container_of(drv,struct of_platform_driver, driver)
+
+extern int of_register_driver(struct of_platform_driver *drv);
+extern void of_unregister_driver(struct of_platform_driver *drv);
+extern int of_device_register(struct of_device *ofdev);
+extern void of_device_unregister(struct of_device *ofdev);
+extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id);
+extern void of_release_dev(struct device *dev);
+
+#endif /* __OF_DEVICE_H__ */
+
diff --git a/include/asm-ppc/ohare.h b/include/asm-ppc/ohare.h
new file mode 100644
index 0000000..023b597
--- /dev/null
+++ b/include/asm-ppc/ohare.h
@@ -0,0 +1,48 @@
+/*
+ * ohare.h: definitions for using the "O'Hare" I/O controller chip.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ *
+ * BenH: Changed to match those of heathrow (but not all of them). Please
+ * check if I didn't break anything (especially the media bay).
+ */
+
+/* offset from ohare base for feature control register */
+#define OHARE_MBCR 0x34
+#define OHARE_FCR 0x38
+
+/*
+ * Bits in feature control register.
+ * These were mostly derived by experiment on a powerbook 3400
+ * and may differ for other machines.
+ */
+#define OH_SCC_RESET 1
+#define OH_BAY_POWER_N 2 /* a guess */
+#define OH_BAY_PCI_ENABLE 4 /* a guess */
+#define OH_BAY_IDE_ENABLE 8
+#define OH_BAY_FLOPPY_ENABLE 0x10
+#define OH_IDE0_ENABLE 0x20
+#define OH_IDE0_RESET_N 0x40 /* a guess */
+#define OH_BAY_DEV_MASK 0x1c
+#define OH_BAY_RESET_N 0x80
+#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */
+#define OH_SCC_ENABLE 0x200
+#define OH_MESH_ENABLE 0x400
+#define OH_FLOPPY_ENABLE 0x800
+#define OH_SCCA_IO 0x4000
+#define OH_SCCB_IO 0x8000
+#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */
+#define OH_IDE1_RESET_N 0x800000
+
+/*
+ * Bits to set in the feature control register on PowerBooks.
+ */
+#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \
+ OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO)
+
+/*
+ * A magic value to put into the feature control register of the
+ * "ohare" I/O controller on Starmaxes to enable the IDE CD interface.
+ * Contributed by Harry Eaton.
+ */
+#define STARMAX_FEATURES 0xbeff7a
diff --git a/include/asm-ppc/open_pic.h b/include/asm-ppc/open_pic.h
new file mode 100644
index 0000000..58545e4
--- /dev/null
+++ b/include/asm-ppc/open_pic.h
@@ -0,0 +1,93 @@
+/*
+ * include/asm-ppc/open_pic.h -- OpenPIC Interrupt Handling
+ *
+ * Copyright (C) 1997 Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#ifndef _PPC_KERNEL_OPEN_PIC_H
+#define _PPC_KERNEL_OPEN_PIC_H
+
+#include <linux/config.h>
+#include <linux/irq.h>
+
+#define OPENPIC_SIZE 0x40000
+
+/*
+ * Non-offset'ed vector numbers
+ */
+
+#define OPENPIC_VEC_TIMER 110 /* and up */
+#define OPENPIC_VEC_IPI 118 /* and up */
+#define OPENPIC_VEC_SPURIOUS 255
+
+/* OpenPIC IRQ controller structure */
+extern struct hw_interrupt_type open_pic;
+
+/* OpenPIC IPI controller structure */
+#ifdef CONFIG_SMP
+extern struct hw_interrupt_type open_pic_ipi;
+#endif /* CONFIG_SMP */
+
+extern u_int OpenPIC_NumInitSenses;
+extern u_char *OpenPIC_InitSenses;
+extern void __iomem * OpenPIC_Addr;
+extern int epic_serial_mode;
+
+/* Exported functions */
+extern void openpic_set_sources(int first_irq, int num_irqs, void __iomem *isr);
+extern void openpic_init(int linux_irq_offset);
+extern void openpic_init_nmi_irq(u_int irq);
+extern void openpic_hookup_cascade(u_int irq, char *name,
+ int (*cascade_fn)(struct pt_regs *));
+extern u_int openpic_irq(void);
+extern void openpic_eoi(void);
+extern void openpic_request_IPIs(void);
+extern void do_openpic_setup_cpu(void);
+extern int openpic_get_irq(struct pt_regs *regs);
+extern void openpic_reset_processor_phys(u_int cpumask);
+extern void openpic_setup_ISU(int isu_num, unsigned long addr);
+extern void openpic_cause_IPI(u_int ipi, cpumask_t cpumask);
+extern void smp_openpic_message_pass(int target, int msg, unsigned long data,
+ int wait);
+extern void openpic_set_k2_cascade(int irq);
+extern void openpic_set_priority(u_int pri);
+
+extern inline int openpic_to_irq(int irq)
+{
+ /* IRQ 0 usually means 'disabled'.. don't mess with it
+ * exceptions to this (sandpoint maybe?)
+ * shouldn't use openpic_to_irq
+ */
+ if (irq != 0){
+ return irq += NUM_8259_INTERRUPTS;
+ } else {
+ return 0;
+ }
+}
+/* Support for second openpic on G5 macs */
+
+// FIXME: To be replaced by sane cascaded controller management */
+
+#define PMAC_OPENPIC2_OFFSET 128
+
+#define OPENPIC2_VEC_TIMER 110 /* and up */
+#define OPENPIC2_VEC_IPI 118 /* and up */
+#define OPENPIC2_VEC_SPURIOUS 127
+
+
+extern void* OpenPIC2_Addr;
+
+/* Exported functions */
+extern void openpic2_set_sources(int first_irq, int num_irqs, void *isr);
+extern void openpic2_init(int linux_irq_offset);
+extern void openpic2_init_nmi_irq(u_int irq);
+extern u_int openpic2_irq(void);
+extern void openpic2_eoi(void);
+extern int openpic2_get_irq(struct pt_regs *regs);
+extern void openpic2_setup_ISU(int isu_num, unsigned long addr);
+#endif /* _PPC_KERNEL_OPEN_PIC_H */
diff --git a/include/asm-ppc/page.h b/include/asm-ppc/page.h
new file mode 100644
index 0000000..4789dc0
--- /dev/null
+++ b/include/asm-ppc/page.h
@@ -0,0 +1,169 @@
+#ifndef _PPC_PAGE_H
+#define _PPC_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+
+/*
+ * Subtle: this is an int (not an unsigned long) and so it
+ * gets extended to 64 bits the way want (i.e. with 1s). -- paulus
+ */
+#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+
+/* This must match what is in arch/ppc/Makefile */
+#define PAGE_OFFSET CONFIG_KERNEL_START
+#define KERNELBASE PAGE_OFFSET
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
+ * physical addressing. For now this just the IBM PPC440.
+ */
+#ifdef CONFIG_PTE_64BIT
+typedef unsigned long long pte_basic_t;
+#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */
+#define PTE_FMT "%16Lx"
+#else
+typedef unsigned long pte_basic_t;
+#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */
+#define PTE_FMT "%.8lx"
+#endif
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pte_basic_t pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((x).pmd)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef pte_basic_t pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x) (x)
+#define pmd_val(x) (x)
+#define pgd_val(x) (x)
+#define pgprot_val(x) (x)
+
+#define __pte(x) (x)
+#define __pmd(x) (x)
+#define __pgd(x) (x)
+#define __pgprot(x) (x)
+
+#endif
+
+
+/* align addr on a size boundary - adjust address up if needed -- Cort */
+#define _ALIGN(addr,size) (((addr)+(size)-1)&(~((size)-1)))
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+struct page;
+extern void clear_pages(void *page, int order);
+static inline void clear_page(void *page) { clear_pages(page, 0); }
+extern void copy_page(void *to, void *from);
+extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
+extern void copy_user_page(void *to, void *from, unsigned long vaddr,
+ struct page *pg);
+
+#ifndef CONFIG_APUS
+#define PPC_MEMSTART 0
+#define PPC_PGSTART 0
+#define PPC_MEMOFFSET PAGE_OFFSET
+#else
+extern unsigned long ppc_memstart;
+extern unsigned long ppc_pgstart;
+extern unsigned long ppc_memoffset;
+#define PPC_MEMSTART ppc_memstart
+#define PPC_PGSTART ppc_pgstart
+#define PPC_MEMOFFSET ppc_memoffset
+#endif
+
+#if defined(CONFIG_APUS) && !defined(MODULE)
+/* map phys->virtual and virtual->phys for RAM pages */
+static inline unsigned long ___pa(unsigned long v)
+{
+ unsigned long p;
+ asm volatile ("1: addis %0, %1, %2;"
+ ".section \".vtop_fixup\",\"aw\";"
+ ".align 1;"
+ ".long 1b;"
+ ".previous;"
+ : "=r" (p)
+ : "b" (v), "K" (((-PAGE_OFFSET) >> 16) & 0xffff));
+
+ return p;
+}
+static inline void* ___va(unsigned long p)
+{
+ unsigned long v;
+ asm volatile ("1: addis %0, %1, %2;"
+ ".section \".ptov_fixup\",\"aw\";"
+ ".align 1;"
+ ".long 1b;"
+ ".previous;"
+ : "=r" (v)
+ : "b" (p), "K" (((PAGE_OFFSET) >> 16) & 0xffff));
+
+ return (void*) v;
+}
+#else
+#define ___pa(vaddr) ((vaddr)-PPC_MEMOFFSET)
+#define ___va(paddr) ((paddr)+PPC_MEMOFFSET)
+#endif
+
+extern int page_is_ram(unsigned long pfn);
+
+#define __pa(x) ___pa((unsigned long)(x))
+#define __va(x) ((void *)(___va((unsigned long)(x))))
+
+#define pfn_to_page(pfn) (mem_map + ((pfn) - PPC_PGSTART))
+#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + PPC_PGSTART)
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT)
+
+#define pfn_valid(pfn) (((pfn) - PPC_PGSTART) < max_mapnr)
+#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+ int lz;
+
+ size = (size-1) >> PAGE_SHIFT;
+ asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
+ return 32 - lz;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_PAGE_H */
diff --git a/include/asm-ppc/param.h b/include/asm-ppc/param.h
new file mode 100644
index 0000000..b24a4e3
--- /dev/null
+++ b/include/asm-ppc/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_PPC_PARAM_H
+#define _ASM_PPC_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ 1000 /* internal timer frequency */
+#define USER_HZ 100 /* for user interfaces in "ticks" */
+#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */
+#endif /* __KERNEL__ */
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif
diff --git a/include/asm-ppc/parport.h b/include/asm-ppc/parport.h
new file mode 100644
index 0000000..11f96d3
--- /dev/null
+++ b/include/asm-ppc/parport.h
@@ -0,0 +1,18 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_PPC_PARPORT_H
+#define _ASM_PPC_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+ return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASM_PPC_PARPORT_H) */
diff --git a/include/asm-ppc/pc_serial.h b/include/asm-ppc/pc_serial.h
new file mode 100644
index 0000000..fa9cbb6
--- /dev/null
+++ b/include/asm-ppc/pc_serial.h
@@ -0,0 +1,127 @@
+/*
+ * include/asm-ppc/pc_serial.h
+ *
+ * This is basically a copy of include/asm-i386/serial.h.
+ * It is used on platforms which have an ISA bus and thus are likely
+ * to have PC-style serial ports at the legacy I/O port addresses.
+ * It also includes the definitions for the fourport, accent, boca
+ * and hub6 multiport serial cards, although I have never heard of
+ * anyone using any of those on a PPC platform. -- paulus
+ */
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define RS_TABLE_SIZE 64
+#else
+#define RS_TABLE_SIZE 4
+#endif
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#define HUB6_FLAGS 0
+#endif
+
+/*
+ * The following define the access methods for the HUB6 card. All
+ * access is through two ports for all 24 possible chips. The card is
+ * selected through the high 2 bits, the port on that card with the
+ * "middle" 3 bits, and the register on that port with the bottom
+ * 3 bits.
+ *
+ * While the access port and interrupt is configurable, the default
+ * port locations are 0x302 for the port control register, and 0x303
+ * for the data read/write register. Normally, the interrupt is at irq3
+ * but can be anything from 3 to 7 inclusive. Note that using 3 will
+ * require disabling com2.
+ */
+
+#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+
+#define STD_SERIAL_PORT_DEFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
+ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
+ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
+
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define EXTRA_SERIAL_PORT_DEFNS \
+ { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \
+ { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \
+ { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \
+ { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \
+ { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \
+ { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \
+ { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \
+ { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \
+ { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \
+ { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \
+ { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \
+ { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \
+ { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \
+ { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \
+ { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \
+ { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \
+ { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \
+ { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \
+ { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \
+ { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \
+ { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \
+ { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \
+ { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \
+ { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \
+ { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \
+ { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \
+ { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \
+ { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */
+#else
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif
+
+/* You can have up to four HUB6's in the system, but I've only
+ * included two cards here for a total of twelve ports.
+ */
+#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
+#define HUB6_SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \
+ { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */
+#else
+#define HUB6_SERIAL_PORT_DFNS
+#endif
+
+#define SERIAL_PORT_DFNS \
+ STD_SERIAL_PORT_DEFNS \
+ EXTRA_SERIAL_PORT_DEFNS \
+ HUB6_SERIAL_PORT_DFNS
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
new file mode 100644
index 0000000..78e9be6
--- /dev/null
+++ b/include/asm-ppc/pci-bridge.h
@@ -0,0 +1,136 @@
+#ifdef __KERNEL__
+#ifndef _ASM_PCI_BRIDGE_H
+#define _ASM_PCI_BRIDGE_H
+
+#include <linux/ioport.h>
+#include <linux/pci.h>
+
+struct device_node;
+struct pci_controller;
+
+/*
+ * pci_io_base returns the memory address at which you can access
+ * the I/O space for PCI bus number `bus' (or NULL on error).
+ */
+extern void *pci_bus_io_base(unsigned int bus);
+extern unsigned long pci_bus_io_base_phys(unsigned int bus);
+extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
+
+/* Allocate a new PCI host bridge structure */
+extern struct pci_controller* pcibios_alloc_controller(void);
+
+/* Helper function for setting up resources */
+extern void pci_init_resource(struct resource *res, unsigned long start,
+ unsigned long end, int flags, char *name);
+
+/* Get the PCI host controller for a bus */
+extern struct pci_controller* pci_bus_to_hose(int bus);
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller*
+pci_find_hose_for_OF_device(struct device_node* node);
+
+/* Fill up host controller resources from the OF node */
+extern void
+pci_process_bridge_OF_ranges(struct pci_controller *hose,
+ struct device_node *dev, int primary);
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+ int index; /* PCI domain number */
+ struct pci_controller *next;
+ struct pci_bus *bus;
+ void *arch_data;
+
+ int first_busno;
+ int last_busno;
+ int bus_offset;
+
+ void *io_base_virt;
+ unsigned long io_base_phys;
+
+ /* Some machines (PReP) have a non 1:1 mapping of
+ * the PCI memory space in the CPU bus space
+ */
+ unsigned long pci_mem_offset;
+
+ struct pci_ops *ops;
+ volatile unsigned int __iomem *cfg_addr;
+ volatile void __iomem *cfg_data;
+ /*
+ * If set, indirect method will set the cfg_type bit as
+ * needed to generate type 1 configuration transactions.
+ */
+ int set_cfg_type;
+
+ /* Currently, we limit ourselves to 1 IO range and 3 mem
+ * ranges since the common pci_bus structure can't handle more
+ */
+ struct resource io_resource;
+ struct resource mem_resources[3];
+ int mem_resource_count;
+
+ /* Host bridge I/O and Memory space
+ * Used for BAR placement algorithms
+ */
+ struct resource io_space;
+ struct resource mem_space;
+};
+
+/* These are used for config access before all the PCI probing
+ has been done. */
+int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn,
+ int where, u8 *val);
+int early_read_config_word(struct pci_controller *hose, int bus, int dev_fn,
+ int where, u16 *val);
+int early_read_config_dword(struct pci_controller *hose, int bus, int dev_fn,
+ int where, u32 *val);
+int early_write_config_byte(struct pci_controller *hose, int bus, int dev_fn,
+ int where, u8 val);
+int early_write_config_word(struct pci_controller *hose, int bus, int dev_fn,
+ int where, u16 val);
+int early_write_config_dword(struct pci_controller *hose, int bus, int dev_fn,
+ int where, u32 val);
+
+extern void setup_indirect_pci_nomap(struct pci_controller* hose,
+ void __iomem *cfg_addr, void __iomem *cfg_data);
+extern void setup_indirect_pci(struct pci_controller* hose,
+ u32 cfg_addr, u32 cfg_data);
+extern void setup_grackle(struct pci_controller *hose);
+
+extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
+
+/*
+ * The following code swizzles for exactly one bridge. The routine
+ * common_swizzle below handles multiple bridges. But there are a
+ * some boards that don't follow the PCI spec's suggestion so we
+ * break this piece out separately.
+ */
+static inline unsigned char bridge_swizzle(unsigned char pin,
+ unsigned char idsel)
+{
+ return (((pin-1) + idsel) % 4) + 1;
+}
+
+/*
+ * The following macro is used to lookup irqs in a standard table
+ * format for those PPC systems that do not already have PCI
+ * interrupts properly routed.
+ */
+/* FIXME - double check this */
+#define PCI_IRQ_TABLE_LOOKUP \
+({ long _ctl_ = -1; \
+ if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
+ _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
+ _ctl_; })
+
+/*
+ * Scan the buses below a given PCI host bridge and assign suitable
+ * resources to all devices found.
+ */
+extern int pciauto_bus_scan(struct pci_controller *, int);
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
new file mode 100644
index 0000000..ce5ae6d
--- /dev/null
+++ b/include/asm-ppc/pci.h
@@ -0,0 +1,108 @@
+#ifndef __PPC_PCI_H
+#define __PPC_PCI_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm-generic/pci-dma-compat.h>
+
+struct pci_dev;
+
+/* Values for the `which' argument to sys_pciconfig_iobase syscall. */
+#define IOBASE_BRIDGE_NUMBER 0
+#define IOBASE_MEMORY 1
+#define IOBASE_IO 2
+#define IOBASE_ISA_IO 3
+#define IOBASE_ISA_MEM 4
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers
+ */
+extern int pci_assign_all_busses;
+
+#define pcibios_assign_all_busses() (pci_assign_all_busses)
+#define pcibios_scan_all_fns(a, b) 0
+
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0x10000000
+
+extern inline void pcibios_set_master(struct pci_dev *dev)
+{
+ /* No special bus mastering setup handling */
+}
+
+extern inline void pcibios_penalize_isa_irq(int irq)
+{
+ /* We don't do dynamic PCI IRQ allocation */
+}
+
+extern unsigned long pci_resource_to_bus(struct pci_dev *pdev, struct resource *res);
+
+/*
+ * The PCI bus bridge can translate addresses issued by the processor(s)
+ * into a different address on the PCI bus. On 32-bit cpus, we assume
+ * this mapping is 1-1, but on 64-bit systems it often isn't.
+ *
+ * Obsolete ! Drivers should now use pci_resource_to_bus
+ */
+extern unsigned long phys_to_bus(unsigned long pa);
+extern unsigned long pci_phys_to_bus(unsigned long pa, int busnr);
+extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr);
+
+/* The PCI address space does equal the physical memory
+ * address space. The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME) (0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME) (0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
+
+/*
+ * At present there are very few 32-bit PPC machines that can have
+ * memory above the 4GB point, and we don't support that.
+ */
+#define pci_dac_dma_supported(pci_dev, mask) (0)
+
+/* Return the index of the PCI controller for device PDEV. */
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+/* Set the name of the bus as it appears in /proc/bus/pci */
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ return 0;
+}
+
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP 1
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res);
+
+extern void pcibios_add_platform_entries(struct pci_dev *dev);
+
+struct file;
+extern pgprot_t pci_phys_mem_access_prot(struct file *file,
+ unsigned long offset,
+ unsigned long size,
+ pgprot_t prot);
+
+#endif /* __KERNEL__ */
+
+#endif /* __PPC_PCI_H */
diff --git a/include/asm-ppc/percpu.h b/include/asm-ppc/percpu.h
new file mode 100644
index 0000000..d66667c
--- /dev/null
+++ b/include/asm-ppc/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_PPC_PERCPU__
+#define __ARCH_PPC_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_PPC_PERCPU__ */
diff --git a/include/asm-ppc/perfmon.h b/include/asm-ppc/perfmon.h
new file mode 100644
index 0000000..5e7a89c
--- /dev/null
+++ b/include/asm-ppc/perfmon.h
@@ -0,0 +1,22 @@
+#ifndef __PERFMON_H
+#define __PERFMON_H
+
+extern void (*perf_irq)(struct pt_regs *);
+
+int request_perfmon_irq(void (*handler)(struct pt_regs *));
+void free_perfmon_irq(void);
+
+#ifdef CONFIG_FSL_BOOKE
+void init_pmc_stop(int ctr);
+void set_pmc_event(int ctr, int event);
+void set_pmc_user_kernel(int ctr, int user, int kernel);
+void set_pmc_marked(int ctr, int mark0, int mark1);
+void pmc_start_ctr(int ctr, int enable);
+void pmc_start_ctrs(int enable);
+void pmc_stop_ctrs(void);
+void dump_pmcs(void);
+
+extern struct op_ppc32_model op_model_fsl_booke;
+#endif
+
+#endif /* __PERFMON_H */
diff --git a/include/asm-ppc/pgalloc.h b/include/asm-ppc/pgalloc.h
new file mode 100644
index 0000000..931b6de
--- /dev/null
+++ b/include/asm-ppc/pgalloc.h
@@ -0,0 +1,44 @@
+#ifdef __KERNEL__
+#ifndef _PPC_PGALLOC_H
+#define _PPC_PGALLOC_H
+
+#include <linux/config.h>
+#include <linux/threads.h>
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(pgd_t *pgd);
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x) do { } while (0)
+#define __pmd_free_tlb(tlb,x) do { } while (0)
+#define pgd_populate(mm, pmd, pte) BUG()
+
+#ifndef CONFIG_BOOKE
+#define pmd_populate_kernel(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+#else
+#define pmd_populate_kernel(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT)
+#endif
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+extern struct page *pte_alloc_one(struct mm_struct *mm, unsigned long addr);
+extern void pte_free_kernel(pte_t *pte);
+extern void pte_free(struct page *pte);
+
+#define __pte_free_tlb(tlb, pte) pte_free((pte))
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _PPC_PGALLOC_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
new file mode 100644
index 0000000..19dfb7a
--- /dev/null
+++ b/include/asm-ppc/pgtable.h
@@ -0,0 +1,776 @@
+#ifdef __KERNEL__
+#ifndef _PPC_PGTABLE_H
+#define _PPC_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h> /* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The PowerPC MMU uses a hash table containing PTEs, together with
+ * a set of 16 segment registers (on 32-bit implementations), to define
+ * the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings. We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code. Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
+ * We also use the two level tables, but we can put the real bits in them
+ * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
+ * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
+ * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
+ * based upon user/super access. The TLB does not have accessed nor write
+ * protect. We assume that if the TLB get loaded with an entry it is
+ * accessed, and overload the changed bit for write protect. We use
+ * two bits in the software pte that are supposed to be set to zero in
+ * the TLB entry (24 and 25) for these indicators. Although the level 1
+ * descriptor contains the guarded and writethrough/copyback bits, we can
+ * set these at the page level since they get copied from the Mx_TWC
+ * register when the TLB entry is loaded. We will use bit 27 for guard, since
+ * that is where it exists in the MD_TWC, and bit 26 for writethrough.
+ * These will get masked from the level 2 descriptor at TLB load time, and
+ * copied to the MD_TWC before it gets loaded.
+ * Large page sizes added. We currently support two sizes, 4K and 8M.
+ * This also allows a TLB hander optimization because we can directly
+ * load the PMD into MD_TWC. The 8M pages are only used for kernel
+ * mapping of well known areas. The PMD (PGD) entries contain control
+ * flags in addition to the address, so care must be taken that the
+ * software no longer assumes these are only pointers.
+ */
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully-associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
+ *
+ * For any >32-bit physical address platform, we can use the following
+ * two level page table layout where the pgdir is 8KB and the MS 13 bits
+ * are an index to the second level table. The combined pgdir/pmd first
+ * level has 2048 entries and the second level has 512 64-bit PTE entries.
+ * -Matt
+ */
+/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
+#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT)
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT PMD_SHIFT
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTRS_PER_PTE (1 << PTE_SHIFT)
+#define PTRS_PER_PMD 1
+#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR 0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte "PTE_FMT".\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 64MB value just means that there will be a 64MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * We no longer map larger than phys RAM with the BATs so we don't have
+ * to worry about the VMALLOC_OFFSET causing problems. We do have to worry
+ * about clashes between our early calls to ioremap() that start growing down
+ * from ioremap_base being run into the VM area allocations (growing upwards
+ * from VMALLOC_START). For this reason we have ioremap_bot to check when
+ * we actually run into our mappings setup in the early boot with the VM
+ * system. This really does become a problem for machines with good amounts
+ * of RAM. -- Cort
+ */
+#define VMALLOC_OFFSET (0x1000000) /* 16M */
+#ifdef CONFIG_44x
+#include <asm/ibm44x.h>
+#define VMALLOC_START (((_ALIGN((long)high_memory, PPC44x_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#else
+#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#endif
+#define VMALLOC_END ioremap_bot
+
+/*
+ * Bits in a linux-style PTE. These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible.
+ */
+
+#if defined(CONFIG_40x)
+
+/* There are several potential gotchas here. The 40x hardware TLBLO
+ field looks like this:
+
+ 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ RPN..................... 0 0 EX WR ZSEL....... W I M G
+
+ Where possible we make the Linux PTE bits match up with this
+
+ - bits 20 and 21 must be cleared, because we use 4k pages (40x can
+ support down to 1k pages), this is done in the TLBMiss exception
+ handler.
+ - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
+ miss handler. Bit 27 is PAGE_USER, thus selecting the correct
+ zone.
+ - PRESENT *must* be in the bottom two bits because swap cache
+ entries use the top 30 bits. Because 40x doesn't support SMP
+ anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
+ is cleared in the TLB miss handler before the TLB entry is loaded.
+ - All other bits of the PTE are loaded into TLBLO without
+ modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ software PTE bits. We actually use use bits 21, 24, 25, and
+ 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ PRESENT.
+*/
+
+/* Definitions for 40x embedded chips. */
+#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
+#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
+#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
+#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
+#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
+#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
+#define _PAGE_RW 0x040 /* software: Writes permitted */
+#define _PAGE_DIRTY 0x080 /* software: dirty page */
+#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
+#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
+
+#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
+#define _PMD_BAD 0x802
+#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
+#define _PMD_SIZE_4M 0x0c0
+#define _PMD_SIZE_16M 0x0e0
+#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
+
+#elif defined(CONFIG_44x)
+/*
+ * Definitions for PPC440
+ *
+ * Because of the 3 word TLB entries to support 36-bit addressing,
+ * the attribute are difficult to map in such a fashion that they
+ * are easily loaded during exception processing. I decided to
+ * organize the entry so the ERPN is the only portion in the
+ * upper word of the PTE and the attribute bits below are packed
+ * in as sensibly as they can be in the area below a 4KB page size
+ * oriented RPN. This at least makes it easy to load the RPN and
+ * ERPN fields in the TLB. -Matt
+ *
+ * Note that these bits preclude future use of a page size
+ * less than 4KB.
+ */
+#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
+#define _PAGE_RW 0x00000002 /* S: Write permission */
+#define _PAGE_DIRTY 0x00000004 /* S: Page dirty */
+#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
+#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */
+#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */
+#define _PAGE_USER 0x00000040 /* S: User page */
+#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
+#define _PAGE_GUARDED 0x00000100 /* H: G bit */
+#define _PAGE_COHERENT 0x00000200 /* H: M bit */
+#define _PAGE_FILE 0x00000400 /* S: nonlinear file mapping */
+#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
+#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
+
+/* TODO: Add large page lowmem mapping support */
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK 0xffffffff00000000ULL
+
+#elif defined(CONFIG_E500)
+
+/*
+ MMU Assist Register 3:
+
+ 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+ RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR
+
+ - PRESENT *must* be in the bottom three bits because swap cache
+ entries use the top 29 bits.
+
+ - FILE *must* be in the bottom three bits because swap cache
+ entries use the top 29 bits.
+*/
+
+/* Definitions for e500 core */
+#define _PAGE_PRESENT 0x001 /* S: PTE contains a translation */
+#define _PAGE_USER 0x002 /* S: User page (maps to UR) */
+#define _PAGE_FILE 0x002 /* S: when !present: nonlinear file mapping */
+#define _PAGE_ACCESSED 0x004 /* S: Page referenced */
+#define _PAGE_HWWRITE 0x008 /* H: Dirty & RW, set in exception */
+#define _PAGE_RW 0x010 /* S: Write permission */
+#define _PAGE_HWEXEC 0x020 /* H: UX permission */
+
+#define _PAGE_ENDIAN 0x040 /* H: E bit */
+#define _PAGE_GUARDED 0x080 /* H: G bit */
+#define _PAGE_COHERENT 0x100 /* H: M bit */
+#define _PAGE_NO_CACHE 0x200 /* H: I bit */
+#define _PAGE_WRITETHRU 0x400 /* H: W bit */
+#define _PAGE_DIRTY 0x800 /* S: Page dirty */
+
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+#define NUM_TLBCAMS (16)
+
+#elif defined(CONFIG_8xx)
+/* Definitions for 8xx embedded chips. */
+#define _PAGE_PRESENT 0x0001 /* Page is valid */
+#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
+#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
+#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
+
+/* These five software bits must be masked out when the entry is loaded
+ * into the TLB.
+ */
+#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
+#define _PAGE_GUARDED 0x0010 /* software: guarded access */
+#define _PAGE_DIRTY 0x0020 /* software: page changed */
+#define _PAGE_RW 0x0040 /* software: user write access allowed */
+#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
+
+/* Setting any bits in the nibble with the follow two controls will
+ * require a TLB exception handler change. It is assumed unused bits
+ * are always zero.
+ */
+#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
+#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
+
+#define _PMD_PRESENT 0x0001
+#define _PMD_BAD 0x0ff0
+#define _PMD_PAGE_MASK 0x000c
+#define _PMD_PAGE_8M 0x000c
+
+/*
+ * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
+ * for an address even if _PAGE_PRESENT is not set, as a performance
+ * optimization. This is a bug if you ever want to use swap unless
+ * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
+ * definitions for __swp_entry etc. below, which would be gross.
+ * -- paulus
+ */
+#define _PTE_NONE_MASK _PAGE_ACCESSED
+
+#else /* CONFIG_6xx */
+/* Definitions for 60x, 740/750, etc. */
+#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
+#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
+#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
+#define _PAGE_USER 0x004 /* usermode access allowed */
+#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
+#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
+#define _PAGE_DIRTY 0x080 /* C: page changed */
+#define _PAGE_ACCESSED 0x100 /* R: page referenced */
+#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
+#define _PAGE_RW 0x400 /* software: user write access allowed */
+
+#define _PTE_NONE_MASK _PAGE_HASHPTE
+
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+#endif
+
+/*
+ * Some bits are only used on some cpu families...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE 0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK 0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED 0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE 0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC 0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC 0
+#endif
+#ifndef _PMD_PRESENT_MASK
+#define _PMD_PRESENT_MASK _PMD_PRESENT
+#endif
+#ifndef _PMD_SIZE
+#define _PMD_SIZE 0
+#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
+#endif
+
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose. -- paulus.
+ */
+
+#ifdef CONFIG_44x
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
+#else
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
+#endif
+#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
+
+#ifdef CONFIG_PPC_STD_MMU
+/* On standard PPC MMU, no user access implies kernel read/write access,
+ * so to write-protect kernel memory we must turn on user access */
+#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
+#else
+#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
+#endif
+
+#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
+
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
+/* We want the debuggers to be able to set breakpoints anywhere, so
+ * don't write protect the kernel text */
+#define _PAGE_RAM_TEXT _PAGE_RAM
+#else
+#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC)
+#endif
+
+#define PAGE_NONE __pgprot(_PAGE_BASE)
+#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL __pgprot(_PAGE_RAM)
+#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO)
+
+/*
+ * The PowerPC can only do execute protection on a segment (256MB) basis,
+ * not on a page basis. So we consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY_X
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY_X
+#define __P100 PAGE_READONLY
+#define __P101 PAGE_READONLY_X
+#define __P110 PAGE_COPY
+#define __P111 PAGE_COPY_X
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY_X
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED_X
+#define __S100 PAGE_READONLY
+#define __S101 PAGE_READONLY_X
+#define __S110 PAGE_SHARED
+#define __S111 PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
+ * kernel without large page PMD support */
+extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
+
+/*
+ * Conversions between PTE values and page frame numbers.
+ */
+
+#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#define pfn_pte(pfn, prot) __pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD)
+#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)
+#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#ifndef __ASSEMBLY__
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd) { return 0; }
+static inline int pgd_bad(pgd_t pgd) { return 0; }
+static inline int pgd_present(pgd_t pgd) { return 1; }
+#define pgd_clear(xp) do { } while (0)
+
+#define pgd_page(pgd) \
+ ((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
+static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) {
+ pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_exprotect(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+ pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) {
+ pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) {
+ pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) {
+ pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry. flush_hash_pages is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_pages(unsigned context, unsigned long va,
+ unsigned long pmdval, int count);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va,
+ unsigned long pmdval);
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.
+ * The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
+ * 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
+ */
+static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+ unsigned long set)
+{
+ unsigned long old, tmp;
+
+ __asm__ __volatile__("\
+1: lwarx %0,0,%3\n\
+ andc %1,%0,%4\n\
+ or %1,%1,%5\n"
+ PPC405_ERR77(0,%3)
+" stwcx. %1,0,%3\n\
+ bne- 1b"
+ : "=&r" (old), "=&r" (tmp), "=m" (*p)
+ : "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+ : "cc" );
+ return old;
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ * On machines which use an MMU hash table we avoid changing the
+ * _PAGE_HASHPTE bit.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+#if _PAGE_HASHPTE != 0
+ pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
+#else
+ *ptep = pte;
+#endif
+}
+
+/*
+ * 2.6 calles this without flushing the TLB entry, this is wrong
+ * for our hash-based implementation, we fix that up here
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
+{
+ unsigned long old;
+ old = pte_update(ptep, _PAGE_ACCESSED, 0);
+#if _PAGE_HASHPTE != 0
+ if (old & _PAGE_HASHPTE) {
+ unsigned long ptephys = __pa(ptep) & PAGE_MASK;
+ flush_hash_pages(context, addr, ptephys, 1);
+ }
+#endif
+ return (old & _PAGE_ACCESSED) != 0;
+}
+#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
+ __ptep_test_and_clear_young((__vma)->vm_mm->context, __addr, __ptep)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+static inline int ptep_test_and_clear_dirty(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep)
+{
+ return (pte_update(ptep, (_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
+}
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+ unsigned long bits = pte_val(entry) &
+ (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
+ pte_update(ptep, 0, bits);
+}
+
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+ do { \
+ __ptep_set_access_flags(__ptep, __entry, __dirty); \
+ flush_tlb_page_nohash(__vma, __address); \
+ } while(0)
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr,
+ unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
+
+/*
+ * Note that on Book E processors, the pmd contains the kernel virtual
+ * (lowmem) address of the pte page. The physical address is less useful
+ * because everything runs with translation enabled (even the TLB miss
+ * handler). On everything else the pmd contains the physical address
+ * of the pte page. -- paulus
+ */
+#ifndef CONFIG_BOOKE
+#define pmd_page_kernel(pmd) \
+ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd) \
+ (mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+#else
+#define pmd_page_kernel(pmd) \
+ ((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd) \
+ (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+#endif
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+ return (pmd_t *) dir;
+}
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr) \
+ ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr) \
+ ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr) \
+ ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+extern void paging_init(void);
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
+ *_PAGE_HASHPTE bit (if used). -- paulus
+ */
+#define __swp_type(entry) ((entry).val & 0x1f)
+#define __swp_offset(entry) ((entry).val >> 5)
+#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS 29
+#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
+
+/* CONFIG_APUS */
+/* For virtual address to physical address conversion */
+extern void cache_clear(__u32 addr, int length);
+extern void cache_push(__u32 addr, int length);
+extern int mm_end_of_chunk (unsigned long addr, int len);
+extern unsigned long iopa(unsigned long addr);
+extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
+
+/* Values for nocacheflag and cmode */
+/* These are not used by the APUS kernel_map, but prevents
+ compilation errors. */
+#define KERNELMAP_FULL_CACHING 0
+#define KERNELMAP_NOCACHE_SER 1
+#define KERNELMAP_NOCACHE_NONSER 2
+#define KERNELMAP_NO_COPYBACK 3
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
+ int nocacheflag, unsigned long *memavailp );
+
+/*
+ * Set cache mode of (kernel space) address range.
+ */
+extern void kernel_set_cachemode (unsigned long address, unsigned long size,
+ unsigned int cmode);
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) (1)
+
+#ifdef CONFIG_PHYS_64BIT
+extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
+ unsigned long paddr, unsigned long size, pgprot_t prot);
+static inline int io_remap_page_range(struct vm_area_struct *vma,
+ unsigned long vaddr,
+ unsigned long paddr,
+ unsigned long size,
+ pgprot_t prot)
+{
+ phys_addr_t paddr64 = fixup_bigphys_addr(paddr, size);
+ return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot);
+}
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ unsigned long vaddr,
+ unsigned long pfn,
+ unsigned long size,
+ pgprot_t prot)
+{
+ phys_addr_t paddr64 = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+ return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot);
+}
+#else
+#define io_remap_page_range(vma, vaddr, paddr, size, prot) \
+ remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+#endif
+
+#define MK_IOSPACE_PFN(space, pfn) (pfn)
+#define GET_IOSPACE(pfn) 0
+#define GET_PFN(pfn) (pfn)
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep);
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _PPC_PGTABLE_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pmac_feature.h b/include/asm-ppc/pmac_feature.h
new file mode 100644
index 0000000..98c206d
--- /dev/null
+++ b/include/asm-ppc/pmac_feature.h
@@ -0,0 +1,365 @@
+/*
+ * Definition of platform feature hooks for PowerMacs
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Paul Mackerras &
+ * Ben. Herrenschmidt.
+ *
+ *
+ * Note: I removed media-bay details from the feature stuff, I believe it's
+ * not worth it, the media-bay driver can directly use the mac-io
+ * ASIC registers.
+ *
+ * Implementation note: Currently, none of these functions will block.
+ * However, they may internally protect themselves with a spinlock
+ * for way too long. Be prepared for at least some of these to block
+ * in the future.
+ *
+ * Unless specifically defined, the result code is assumed to be an
+ * error when negative, 0 is the default success result. Some functions
+ * may return additional positive result values.
+ *
+ * To keep implementation simple, all feature calls are assumed to have
+ * the prototype parameters (struct device_node* node, int value).
+ * When either is not used, pass 0.
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_ASM_PMAC_FEATURE_H
+#define __PPC_ASM_PMAC_FEATURE_H
+
+#include <asm/macio.h>
+
+/*
+ * Known Mac motherboard models
+ *
+ * Please, report any error here to benh@kernel.crashing.org, thanks !
+ *
+ * Note that I don't fully maintain this list for Core99 & MacRISC2
+ * and I'm considering removing all NewWorld entries from it and
+ * entirely rely on the model string.
+ */
+
+/* PowerSurge are the first generation of PCI Pmacs. This include
+ * all of the Grand-Central based machines. We currently don't
+ * differenciate most of them.
+ */
+#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */
+#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */
+
+/* Here is the infamous serie of OHare based machines
+ */
+#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */
+#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */
+#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */
+#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */
+#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */
+#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */
+
+/* Here are the Heathrow based machines
+ * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
+ */
+#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */
+#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */
+#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/
+#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */
+
+/* Here are newworld machines based on Paddington (heathrow derivative)
+ */
+#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */
+#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */
+#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */
+#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */
+#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */
+
+/* Core99 machines based on UniNorth 1.0 and 1.5
+ *
+ * Note: A single entry here may cover several actual models according
+ * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
+ * FireWire based iMacs, etc...). Those machines are too similar to be
+ * distinguished here, when they need to be differencied, use the
+ * device-tree "model" or "compatible" property.
+ */
+#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */
+#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */
+#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */
+#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */
+#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */
+#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */
+#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */
+#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */
+#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */
+#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */
+#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */
+#define PMAC_TYPE_EMAC 0x50 /* eMac */
+#define PMAC_TYPE_UNKNOWN_CORE99 0x5f
+
+/* MacRisc2 with UniNorth 2.0 */
+#define PMAC_TYPE_RACKMAC 0x80 /* XServe */
+#define PMAC_TYPE_WINDTUNNEL 0x81
+
+/* MacRISC2 machines based on the Pangea chipset
+ */
+#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */
+#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */
+#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */
+#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f
+
+/* MacRISC2 machines based on the Intrepid chipset
+ */
+#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */
+
+/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore,
+ * but rather machine families
+ */
+#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */
+#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */
+#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */
+#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */
+#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */
+
+/*
+ * Motherboard flags
+ */
+
+#define PMAC_MB_CAN_SLEEP 0x00000001
+#define PMAC_MB_HAS_FW_POWER 0x00000002
+#define PMAC_MB_OLD_CORE99 0x00000004
+#define PMAC_MB_MOBILE 0x00000008
+#define PMAC_MB_MAY_SLEEP 0x00000010
+
+/*
+ * Feature calls supported on pmac
+ *
+ */
+
+/*
+ * Use this inline wrapper
+ */
+struct device_node;
+
+static inline long pmac_call_feature(int selector, struct device_node* node,
+ long param, long value)
+{
+ if (!ppc_md.feature_call)
+ return -ENODEV;
+ return ppc_md.feature_call(selector, node, param, value);
+}
+
+/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value)
+ * enable/disable an SCC side. Pass the node corresponding to the
+ * channel side as a parameter.
+ * param is the type of port
+ * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
+ * for use by xmon.
+ */
+#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0)
+ #define PMAC_SCC_ASYNC 0
+ #define PMAC_SCC_IRDA 1
+ #define PMAC_SCC_I2S1 2
+ #define PMAC_SCC_FLAG_XMON 0x00001000
+
+/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the internal modem.
+ */
+#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1)
+
+/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value)
+ * enable/disable the swim3 (floppy) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2)
+
+/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the mesh (scsi) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3)
+
+/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value)
+ * enable/disable an IDE port of a mac-io ASIC
+ * pass the busID parameter
+ */
+#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4)
+
+/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value)
+ * assert(1)/release(0) an IDE reset line (mac-io IDE only)
+ */
+#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5)
+
+/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
+ * it's reset line
+ */
+#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6)
+
+/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
+ * control the cell's clock.
+ */
+#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7)
+
+/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0)
+ * Perform a HW reset of the PHY connected to a gmac controller.
+ * Pass the gmac device node, not the PHY node.
+ */
+#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8)
+
+/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the sound chip, whatever it is and provided it can
+ * acually be controlled
+ */
+#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9)
+
+/* -- add various tweaks related to sound routing -- */
+
+/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the airport card
+ */
+#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10)
+
+/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0)
+ * toggle the reset line of a CPU on an uninorth-based SMP machine
+ */
+#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11)
+
+/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable an USB cell, along with the power of the USB "pad"
+ * on keylargo based machines
+ */
+#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12)
+
+/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the firewire cell of an uninorth ASIC.
+ */
+#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13)
+
+/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value)
+ * enable/disable the firewire cable power supply of the uninorth
+ * firewire cell
+ */
+#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14)
+
+/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value)
+ * set the sleep state of the motherboard.
+ *
+ * Pass -1 as value to query for sleep capability
+ * Pass 1 to set IOs to sleep
+ * Pass 0 to set IOs to wake
+ */
+#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15)
+
+/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0)
+ *
+ * returns some motherboard infos.
+ * selector: 0 - model id
+ * 1 - model flags (capabilities)
+ * 2 - model name (cast to const char *)
+ */
+#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16)
+#define PMAC_MB_INFO_MODEL 0
+#define PMAC_MB_INFO_FLAGS 1
+#define PMAC_MB_INFO_NAME 2
+
+/* PMAC_FTR_READ_GPIO (NULL, int index, 0)
+ *
+ * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
+ * the value returned is a byte (positive), or a negative error code
+ */
+#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17)
+
+/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value)
+ *
+ * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
+ */
+#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18)
+
+/* PMAC_FTR_ENABLE_MPIC
+ *
+ * Enable the MPIC cell
+ */
+#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19)
+
+/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0)
+ *
+ * Enable/disable the AACK delay on the northbridge for systems using DFS
+ */
+#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20)
+
+/* PMAC_FTR_DEVICE_CAN_WAKE
+ *
+ * Used by video drivers to inform system that they can actually perform
+ * wakeup from sleep
+ */
+#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22)
+
+
+/* Don't use those directly, they are for the sake of pmac_setup.c */
+extern long pmac_do_feature_call(unsigned int selector, ...);
+extern void pmac_feature_init(void);
+
+/* Video suspend tweak */
+extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
+extern void pmac_call_early_video_resume(void);
+
+#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x))
+
+
+/*
+ * The part below is for use by macio_asic.c only, do not rely
+ * on the data structures or constants below in a normal driver
+ *
+ */
+
+#define MAX_MACIO_CHIPS 2
+
+enum {
+ macio_unknown = 0,
+ macio_grand_central,
+ macio_ohare,
+ macio_ohareII,
+ macio_heathrow,
+ macio_gatwick,
+ macio_paddington,
+ macio_keylargo,
+ macio_pangea,
+ macio_intrepid,
+ macio_keylargo2,
+};
+
+struct macio_chip
+{
+ struct device_node *of_node;
+ int type;
+ const char *name;
+ int rev;
+ volatile u32 __iomem *base;
+ unsigned long flags;
+
+ /* For use by macio_asic PCI driver */
+ struct macio_bus lbus;
+};
+
+extern struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+#define MACIO_FLAG_SCCA_ON 0x00000001
+#define MACIO_FLAG_SCCB_ON 0x00000002
+#define MACIO_FLAG_SCC_LOCKED 0x00000004
+#define MACIO_FLAG_AIRPORT_ON 0x00000010
+#define MACIO_FLAG_FW_SUPPORTED 0x00000020
+
+extern struct macio_chip* macio_find(struct device_node* child, int type);
+
+#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2))
+#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r))
+
+#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r)))
+#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v)))
+#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v)))
+#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
+#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r)))
+#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v)))
+
+#endif /* __PPC_ASM_PMAC_FEATURE_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pmac_low_i2c.h b/include/asm-ppc/pmac_low_i2c.h
new file mode 100644
index 0000000..809a596
--- /dev/null
+++ b/include/asm-ppc/pmac_low_i2c.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-ppc/pmac_low_i2c.h
+ *
+ * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef __PMAC_LOW_I2C_H__
+#define __PMAC_LOW_I2C_H__
+
+/* i2c mode (based on the platform functions format) */
+enum {
+ pmac_low_i2c_mode_dumb = 1,
+ pmac_low_i2c_mode_std = 2,
+ pmac_low_i2c_mode_stdsub = 3,
+ pmac_low_i2c_mode_combined = 4,
+};
+
+/* RW bit in address */
+enum {
+ pmac_low_i2c_read = 0x01,
+ pmac_low_i2c_write = 0x00
+};
+
+/* Init, called early during boot */
+extern void pmac_init_low_i2c(void);
+
+/* Locking functions exposed to i2c-keywest */
+int pmac_low_i2c_lock(struct device_node *np);
+int pmac_low_i2c_unlock(struct device_node *np);
+
+/* Access functions for platform code */
+int pmac_low_i2c_open(struct device_node *np, int channel);
+int pmac_low_i2c_close(struct device_node *np);
+int pmac_low_i2c_setmode(struct device_node *np, int mode);
+int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len);
+
+
+#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/include/asm-ppc/pnp.h b/include/asm-ppc/pnp.h
new file mode 100644
index 0000000..6f6760b
--- /dev/null
+++ b/include/asm-ppc/pnp.h
@@ -0,0 +1,645 @@
+#ifdef __KERNEL__
+/* 11/02/95 */
+/*----------------------------------------------------------------------------*/
+/* Plug and Play header definitions */
+/*----------------------------------------------------------------------------*/
+
+/* Structure map for PnP on PowerPC Reference Platform */
+/* See Plug and Play ISA Specification, Version 1.0, May 28, 1993. It */
+/* (or later versions) is available on Compuserve in the PLUGPLAY area. */
+/* This code has extensions to that specification, namely new short and */
+/* long tag types for platform dependent information */
+
+/* Warning: LE notation used throughout this file */
+
+/* For enum's: if given in hex then they are bit significant, i.e. */
+/* only one bit is on for each enum */
+
+#ifndef _PNP_
+#define _PNP_
+
+#ifndef __ASSEMBLY__
+#define MAX_MEM_REGISTERS 9
+#define MAX_IO_PORTS 20
+#define MAX_IRQS 7
+/*#define MAX_DMA_CHANNELS 7*/
+
+/* Interrupt controllers */
+
+#define PNPinterrupt0 "PNP0000" /* AT Interrupt Controller */
+#define PNPinterrupt1 "PNP0001" /* EISA Interrupt Controller */
+#define PNPinterrupt2 "PNP0002" /* MCA Interrupt Controller */
+#define PNPinterrupt3 "PNP0003" /* APIC */
+#define PNPExtInt "IBM000D" /* PowerPC Extended Interrupt Controller */
+
+/* Timers */
+
+#define PNPtimer0 "PNP0100" /* AT Timer */
+#define PNPtimer1 "PNP0101" /* EISA Timer */
+#define PNPtimer2 "PNP0102" /* MCA Timer */
+
+/* DMA controllers */
+
+#define PNPdma0 "PNP0200" /* AT DMA Controller */
+#define PNPdma1 "PNP0201" /* EISA DMA Controller */
+#define PNPdma2 "PNP0202" /* MCA DMA Controller */
+
+/* start of August 15, 1994 additions */
+/* CMOS */
+#define PNPCMOS "IBM0009" /* CMOS */
+
+/* L2 Cache */
+#define PNPL2 "IBM0007" /* L2 Cache */
+
+/* NVRAM */
+#define PNPNVRAM "IBM0008" /* NVRAM */
+
+/* Power Management */
+#define PNPPM "IBM0005" /* Power Management */
+/* end of August 15, 1994 additions */
+
+/* Keyboards */
+
+#define PNPkeyboard0 "PNP0300" /* IBM PC/XT KB Cntlr (83 key, no mouse) */
+#define PNPkeyboard1 "PNP0301" /* Olivetti ICO (102 key) */
+#define PNPkeyboard2 "PNP0302" /* IBM PC/AT KB Cntlr (84 key) */
+#define PNPkeyboard3 "PNP0303" /* IBM Enhanced (101/2 key, PS/2 mouse) */
+#define PNPkeyboard4 "PNP0304" /* Nokia 1050 KB Cntlr */
+#define PNPkeyboard5 "PNP0305" /* Nokia 9140 KB Cntlr */
+#define PNPkeyboard6 "PNP0306" /* Standard Japanese KB Cntlr */
+#define PNPkeyboard7 "PNP0307" /* Microsoft Windows (R) KB Cntlr */
+
+/* Parallel port controllers */
+
+#define PNPparallel0 "PNP0400" /* Standard LPT Parallel Port */
+#define PNPparallel1 "PNP0401" /* ECP Parallel Port */
+#define PNPepp "IBM001C" /* EPP Parallel Port */
+
+/* Serial port controllers */
+
+#define PNPserial0 "PNP0500" /* Standard PC Serial port */
+#define PNPSerial1 "PNP0501" /* 16550A Compatible Serial port */
+
+/* Disk controllers */
+
+#define PNPdisk0 "PNP0600" /* Generic ESDI/IDE/ATA Compat HD Cntlr */
+#define PNPdisk1 "PNP0601" /* Plus Hardcard II */
+#define PNPdisk2 "PNP0602" /* Plus Hardcard IIXL/EZ */
+
+/* Diskette controllers */
+
+#define PNPdiskette0 "PNP0700" /* PC Standard Floppy Disk Controller */
+
+/* Display controllers */
+
+#define PNPdisplay0 "PNP0900" /* VGA Compatible */
+#define PNPdisplay1 "PNP0901" /* Video Seven VGA */
+#define PNPdisplay2 "PNP0902" /* 8514/A Compatible */
+#define PNPdisplay3 "PNP0903" /* Trident VGA */
+#define PNPdisplay4 "PNP0904" /* Cirrus Logic Laptop VGA */
+#define PNPdisplay5 "PNP0905" /* Cirrus Logic VGA */
+#define PNPdisplay6 "PNP0906" /* Tseng ET4000 or ET4000/W32 */
+#define PNPdisplay7 "PNP0907" /* Western Digital VGA */
+#define PNPdisplay8 "PNP0908" /* Western Digital Laptop VGA */
+#define PNPdisplay9 "PNP0909" /* S3 */
+#define PNPdisplayA "PNP090A" /* ATI Ultra Pro/Plus (Mach 32) */
+#define PNPdisplayB "PNP090B" /* ATI Ultra (Mach 8) */
+#define PNPdisplayC "PNP090C" /* XGA Compatible */
+#define PNPdisplayD "PNP090D" /* ATI VGA Wonder */
+#define PNPdisplayE "PNP090E" /* Weitek P9000 Graphics Adapter */
+#define PNPdisplayF "PNP090F" /* Oak Technology VGA */
+
+/* Peripheral busses */
+
+#define PNPbuses0 "PNP0A00" /* ISA Bus */
+#define PNPbuses1 "PNP0A01" /* EISA Bus */
+#define PNPbuses2 "PNP0A02" /* MCA Bus */
+#define PNPbuses3 "PNP0A03" /* PCI Bus */
+#define PNPbuses4 "PNP0A04" /* VESA/VL Bus */
+
+/* RTC, BIOS, planar devices */
+
+#define PNPspeaker0 "PNP0800" /* AT Style Speaker Sound */
+#define PNPrtc0 "PNP0B00" /* AT RTC */
+#define PNPpnpbios0 "PNP0C00" /* PNP BIOS (only created by root enum) */
+#define PNPpnpbios1 "PNP0C01" /* System Board Memory Device */
+#define PNPpnpbios2 "PNP0C02" /* Math Coprocessor */
+#define PNPpnpbios3 "PNP0C03" /* PNP BIOS Event Notification Interrupt */
+
+/* PCMCIA controller */
+
+#define PNPpcmcia0 "PNP0E00" /* Intel 82365 Compatible PCMCIA Cntlr */
+
+/* Mice */
+
+#define PNPmouse0 "PNP0F00" /* Microsoft Bus Mouse */
+#define PNPmouse1 "PNP0F01" /* Microsoft Serial Mouse */
+#define PNPmouse2 "PNP0F02" /* Microsoft Inport Mouse */
+#define PNPmouse3 "PNP0F03" /* Microsoft PS/2 Mouse */
+#define PNPmouse4 "PNP0F04" /* Mousesystems Mouse */
+#define PNPmouse5 "PNP0F05" /* Mousesystems 3 Button Mouse - COM2 */
+#define PNPmouse6 "PNP0F06" /* Genius Mouse - COM1 */
+#define PNPmouse7 "PNP0F07" /* Genius Mouse - COM2 */
+#define PNPmouse8 "PNP0F08" /* Logitech Serial Mouse */
+#define PNPmouse9 "PNP0F09" /* Microsoft Ballpoint Serial Mouse */
+#define PNPmouseA "PNP0F0A" /* Microsoft PNP Mouse */
+#define PNPmouseB "PNP0F0B" /* Microsoft PNP Ballpoint Mouse */
+
+/* Modems */
+
+#define PNPmodem0 "PNP9000" /* Specific IDs TBD */
+
+/* Network controllers */
+
+#define PNPnetworkC9 "PNP80C9" /* IBM Token Ring */
+#define PNPnetworkCA "PNP80CA" /* IBM Token Ring II */
+#define PNPnetworkCB "PNP80CB" /* IBM Token Ring II/Short */
+#define PNPnetworkCC "PNP80CC" /* IBM Token Ring 4/16Mbs */
+#define PNPnetwork27 "PNP8327" /* IBM Token Ring (All types) */
+#define PNPnetworket "IBM0010" /* IBM Ethernet used by Power PC */
+#define PNPneteisaet "IBM2001" /* IBM Ethernet EISA adapter */
+#define PNPAMD79C970 "IBM0016" /* AMD 79C970 (PCI Ethernet) */
+
+/* SCSI controllers */
+
+#define PNPscsi0 "PNPA000" /* Adaptec 154x Compatible SCSI Cntlr */
+#define PNPscsi1 "PNPA001" /* Adaptec 174x Compatible SCSI Cntlr */
+#define PNPscsi2 "PNPA002" /* Future Domain 16-700 Compat SCSI Cntlr*/
+#define PNPscsi3 "PNPA003" /* Panasonic CDROM Adapter (SBPro/SB16) */
+#define PNPscsiF "IBM000F" /* NCR 810 SCSI Controller */
+#define PNPscsi825 "IBM001B" /* NCR 825 SCSI Controller */
+#define PNPscsi875 "IBM0018" /* NCR 875 SCSI Controller */
+
+/* Sound/Video, Multimedia */
+
+#define PNPmm0 "PNPB000" /* Sound Blaster Compatible Sound Device */
+#define PNPmm1 "PNPB001" /* MS Windows Sound System Compat Device */
+#define PNPmmF "IBM000E" /* Crystal CS4231 Audio Device */
+#define PNPv7310 "IBM0015" /* ASCII V7310 Video Capture Device */
+#define PNPmm4232 "IBM0017" /* Crystal CS4232 Audio Device */
+#define PNPpmsyn "IBM001D" /* YMF 289B chip (Yamaha) */
+#define PNPgp4232 "IBM0012" /* Crystal CS4232 Game Port */
+#define PNPmidi4232 "IBM0013" /* Crystal CS4232 MIDI */
+
+/* Operator Panel */
+#define PNPopctl "IBM000B" /* Operator's panel */
+
+/* Service Processor */
+#define PNPsp "IBM0011" /* IBM Service Processor */
+#define PNPLTsp "IBM001E" /* Lightning/Terlingua Support Processor */
+#define PNPLTmsp "IBM001F" /* Lightning/Terlingua Mini-SP */
+
+/* Memory Controller */
+#define PNPmemctl "IBM000A" /* Memory controller */
+
+/* Graphics Assist */
+#define PNPg_assist "IBM0014" /* Graphics Assist */
+
+/* Miscellaneous Device Controllers */
+#define PNPtablet "IBM0019" /* IBM Tablet Controller */
+
+/* PNP Packet Handles */
+
+#define S1_Packet 0x0A /* Version resource */
+#define S2_Packet 0x15 /* Logical DEVID (without flags) */
+#define S2_Packet_flags 0x16 /* Logical DEVID (with flags) */
+#define S3_Packet 0x1C /* Compatible device ID */
+#define S4_Packet 0x22 /* IRQ resource (without flags) */
+#define S4_Packet_flags 0x23 /* IRQ resource (with flags) */
+#define S5_Packet 0x2A /* DMA resource */
+#define S6_Packet 0x30 /* Depend funct start (w/o priority) */
+#define S6_Packet_priority 0x31 /* Depend funct start (w/ priority) */
+#define S7_Packet 0x38 /* Depend funct end */
+#define S8_Packet 0x47 /* I/O port resource (w/o fixed loc) */
+#define S9_Packet_fixed 0x4B /* I/O port resource (w/ fixed loc) */
+#define S14_Packet 0x71 /* Vendor defined */
+#define S15_Packet 0x78 /* End of resource (w/o checksum) */
+#define S15_Packet_checksum 0x79 /* End of resource (w/ checksum) */
+#define L1_Packet 0x81 /* Memory range */
+#define L1_Shadow 0x20 /* Memory is shadowable */
+#define L1_32bit_mem 0x18 /* 32-bit memory only */
+#define L1_8_16bit_mem 0x10 /* 8- and 16-bit supported */
+#define L1_Decode_Hi 0x04 /* decode supports high address */
+#define L1_Cache 0x02 /* read cacheable, write-through */
+#define L1_Writeable 0x01 /* Memory is writeable */
+#define L2_Packet 0x82 /* ANSI ID string */
+#define L3_Packet 0x83 /* Unicode ID string */
+#define L4_Packet 0x84 /* Vendor defined */
+#define L5_Packet 0x85 /* Large I/O */
+#define L6_Packet 0x86 /* 32-bit Fixed Loc Mem Range Desc */
+#define END_TAG 0x78 /* End of resource */
+#define DF_START_TAG 0x30 /* Dependent function start */
+#define DF_START_TAG_priority 0x31 /* Dependent function start */
+#define DF_END_TAG 0x38 /* Dependent function end */
+#define SUBOPTIMAL_CONFIGURATION 0x2 /* Priority byte sub optimal config */
+
+/* Device Base Type Codes */
+
+typedef enum _PnP_BASE_TYPE {
+ Reserved = 0,
+ MassStorageDevice = 1,
+ NetworkInterfaceController = 2,
+ DisplayController = 3,
+ MultimediaController = 4,
+ MemoryController = 5,
+ BridgeController = 6,
+ CommunicationsDevice = 7,
+ SystemPeripheral = 8,
+ InputDevice = 9,
+ ServiceProcessor = 0x0A, /* 11/2/95 */
+ } PnP_BASE_TYPE;
+
+/* Device Sub Type Codes */
+
+typedef enum _PnP_SUB_TYPE {
+ SCSIController = 0,
+ IDEController = 1,
+ FloppyController = 2,
+ IPIController = 3,
+ OtherMassStorageController = 0x80,
+
+ EthernetController = 0,
+ TokenRingController = 1,
+ FDDIController = 2,
+ OtherNetworkController = 0x80,
+
+ VGAController= 0,
+ SVGAController= 1,
+ XGAController= 2,
+ OtherDisplayController = 0x80,
+
+ VideoController = 0,
+ AudioController = 1,
+ OtherMultimediaController = 0x80,
+
+ RAM = 0,
+ FLASH = 1,
+ OtherMemoryDevice = 0x80,
+
+ HostProcessorBridge = 0,
+ ISABridge = 1,
+ EISABridge = 2,
+ MicroChannelBridge = 3,
+ PCIBridge = 4,
+ PCMCIABridge = 5,
+ VMEBridge = 6,
+ OtherBridgeDevice = 0x80,
+
+ RS232Device = 0,
+ ATCompatibleParallelPort = 1,
+ OtherCommunicationsDevice = 0x80,
+
+ ProgrammableInterruptController = 0,
+ DMAController = 1,
+ SystemTimer = 2,
+ RealTimeClock = 3,
+ L2Cache = 4,
+ NVRAM = 5,
+ PowerManagement = 6,
+ CMOS = 7,
+ OperatorPanel = 8,
+ ServiceProcessorClass1 = 9,
+ ServiceProcessorClass2 = 0xA,
+ ServiceProcessorClass3 = 0xB,
+ GraphicAssist = 0xC,
+ SystemPlanar = 0xF, /* 10/5/95 */
+ OtherSystemPeripheral = 0x80,
+
+ KeyboardController = 0,
+ Digitizer = 1,
+ MouseController = 2,
+ TabletController = 3, /* 10/27/95 */
+ OtherInputController = 0x80,
+
+ GeneralMemoryController = 0,
+ } PnP_SUB_TYPE;
+
+/* Device Interface Type Codes */
+
+typedef enum _PnP_INTERFACE {
+ General = 0,
+ GeneralSCSI = 0,
+ GeneralIDE = 0,
+ ATACompatible = 1,
+
+ GeneralFloppy = 0,
+ Compatible765 = 1,
+ NS398_Floppy = 2, /* NS Super I/O wired to use index
+ register at port 398 and data
+ register at port 399 */
+ NS26E_Floppy = 3, /* Ports 26E and 26F */
+ NS15C_Floppy = 4, /* Ports 15C and 15D */
+ NS2E_Floppy = 5, /* Ports 2E and 2F */
+ CHRP_Floppy = 6, /* CHRP Floppy in PR*P system */
+
+ GeneralIPI = 0,
+
+ GeneralEther = 0,
+ GeneralToken = 0,
+ GeneralFDDI = 0,
+
+ GeneralVGA = 0,
+ GeneralSVGA = 0,
+ GeneralXGA = 0,
+
+ GeneralVideo = 0,
+ GeneralAudio = 0,
+ CS4232Audio = 1, /* CS 4232 Plug 'n Play Configured */
+
+ GeneralRAM = 0,
+ GeneralFLASH = 0,
+ PCIMemoryController = 0, /* PCI Config Method */
+ RS6KMemoryController = 1, /* RS6K Config Method */
+
+ GeneralHostBridge = 0,
+ GeneralISABridge = 0,
+ GeneralEISABridge = 0,
+ GeneralMCABridge = 0,
+ GeneralPCIBridge = 0,
+ PCIBridgeDirect = 0,
+ PCIBridgeIndirect = 1,
+ PCIBridgeRS6K = 2,
+ GeneralPCMCIABridge = 0,
+ GeneralVMEBridge = 0,
+
+ GeneralRS232 = 0,
+ COMx = 1,
+ Compatible16450 = 2,
+ Compatible16550 = 3,
+ NS398SerPort = 4, /* NS Super I/O wired to use index
+ register at port 398 and data
+ register at port 399 */
+ NS26ESerPort = 5, /* Ports 26E and 26F */
+ NS15CSerPort = 6, /* Ports 15C and 15D */
+ NS2ESerPort = 7, /* Ports 2E and 2F */
+
+ GeneralParPort = 0,
+ LPTx = 1,
+ NS398ParPort = 2, /* NS Super I/O wired to use index
+ register at port 398 and data
+ register at port 399 */
+ NS26EParPort = 3, /* Ports 26E and 26F */
+ NS15CParPort = 4, /* Ports 15C and 15D */
+ NS2EParPort = 5, /* Ports 2E and 2F */
+
+ GeneralPIC = 0,
+ ISA_PIC = 1,
+ EISA_PIC = 2,
+ MPIC = 3,
+ RS6K_PIC = 4,
+
+ GeneralDMA = 0,
+ ISA_DMA = 1,
+ EISA_DMA = 2,
+
+ GeneralTimer = 0,
+ ISA_Timer = 1,
+ EISA_Timer = 2,
+ GeneralRTC = 0,
+ ISA_RTC = 1,
+
+ StoreThruOnly = 1,
+ StoreInEnabled = 2,
+ RS6KL2Cache = 3,
+
+ IndirectNVRAM = 0, /* Indirectly addressed */
+ DirectNVRAM = 1, /* Memory Mapped */
+ IndirectNVRAM24 = 2, /* Indirectly addressed - 24 bit */
+
+ GeneralPowerManagement = 0,
+ EPOWPowerManagement = 1,
+ PowerControl = 2, // d1378
+
+ GeneralCMOS = 0,
+
+ GeneralOPPanel = 0,
+ HarddiskLight = 1,
+ CDROMLight = 2,
+ PowerLight = 3,
+ KeyLock = 4,
+ ANDisplay = 5, /* AlphaNumeric Display */
+ SystemStatusLED = 6, /* 3 digit 7 segment LED */
+ CHRP_SystemStatusLED = 7, /* CHRP LEDs in PR*P system */
+
+ GeneralServiceProcessor = 0,
+
+ TransferData = 1,
+ IGMC32 = 2,
+ IGMC64 = 3,
+
+ GeneralSystemPlanar = 0, /* 10/5/95 */
+
+ } PnP_INTERFACE;
+
+/* PnP resources */
+
+/* Compressed ASCII is 5 bits per char; 00001=A ... 11010=Z */
+
+typedef struct _SERIAL_ID {
+ unsigned char VendorID0; /* Bit(7)=0 */
+ /* Bits(6:2)=1st character in */
+ /* compressed ASCII */
+ /* Bits(1:0)=2nd character in */
+ /* compressed ASCII bits(4:3) */
+ unsigned char VendorID1; /* Bits(7:5)=2nd character in */
+ /* compressed ASCII bits(2:0) */
+ /* Bits(4:0)=3rd character in */
+ /* compressed ASCII */
+ unsigned char VendorID2; /* Product number - vendor assigned */
+ unsigned char VendorID3; /* Product number - vendor assigned */
+
+/* Serial number is to provide uniqueness if more than one board of same */
+/* type is in system. Must be "FFFFFFFF" if feature not supported. */
+
+ unsigned char Serial0; /* Unique serial number bits (7:0) */
+ unsigned char Serial1; /* Unique serial number bits (15:8) */
+ unsigned char Serial2; /* Unique serial number bits (23:16) */
+ unsigned char Serial3; /* Unique serial number bits (31:24) */
+ unsigned char Checksum;
+ } SERIAL_ID;
+
+typedef enum _PnPItemName {
+ Unused = 0,
+ PnPVersion = 1,
+ LogicalDevice = 2,
+ CompatibleDevice = 3,
+ IRQFormat = 4,
+ DMAFormat = 5,
+ StartDepFunc = 6,
+ EndDepFunc = 7,
+ IOPort = 8,
+ FixedIOPort = 9,
+ Res1 = 10,
+ Res2 = 11,
+ Res3 = 12,
+ SmallVendorItem = 14,
+ EndTag = 15,
+ MemoryRange = 1,
+ ANSIIdentifier = 2,
+ UnicodeIdentifier = 3,
+ LargeVendorItem = 4,
+ MemoryRange32 = 5,
+ MemoryRangeFixed32 = 6,
+ } PnPItemName;
+
+/* Define a bunch of access functions for the bits in the tag field */
+
+/* Tag type - 0 = small; 1 = large */
+#define tag_type(t) (((t) & 0x80)>>7)
+#define set_tag_type(t,v) (t = (t & 0x7f) | ((v)<<7))
+
+/* Small item name is 4 bits - one of PnPItemName enum above */
+#define tag_small_item_name(t) (((t) & 0x78)>>3)
+#define set_tag_small_item_name(t,v) (t = (t & 0x07) | ((v)<<3))
+
+/* Small item count is 3 bits - count of further bytes in packet */
+#define tag_small_count(t) ((t) & 0x07)
+#define set_tag_count(t,v) (t = (t & 0x78) | (v))
+
+/* Large item name is 7 bits - one of PnPItemName enum above */
+#define tag_large_item_name(t) ((t) & 0x7f)
+#define set_tag_large_item_name(t,v) (t = (t | 0x80) | (v))
+
+/* a PnP resource is a bunch of contiguous TAG packets ending with an end tag */
+
+typedef union _PnP_TAG_PACKET {
+ struct _S1_Pack{ /* VERSION PACKET */
+ unsigned char Tag; /* small tag = 0x0a */
+ unsigned char Version[2]; /* PnP version, Vendor version */
+ } S1_Pack;
+
+ struct _S2_Pack{ /* LOGICAL DEVICE ID PACKET */
+ unsigned char Tag; /* small tag = 0x15 or 0x16 */
+ unsigned char DevId[4]; /* Logical device id */
+ unsigned char Flags[2]; /* bit(0) boot device; */
+ /* bit(7:1) cmd in range x31-x37 */
+ /* bit(7:0) cmd in range x28-x3f (opt)*/
+ } S2_Pack;
+
+ struct _S3_Pack{ /* COMPATIBLE DEVICE ID PACKET */
+ unsigned char Tag; /* small tag = 0x1c */
+ unsigned char CompatId[4]; /* Compatible device id */
+ } S3_Pack;
+
+ struct _S4_Pack{ /* IRQ PACKET */
+ unsigned char Tag; /* small tag = 0x22 or 0x23 */
+ unsigned char IRQMask[2]; /* bit(0) is IRQ0, ...; */
+ /* bit(0) is IRQ8 ... */
+ unsigned char IRQInfo; /* optional; assume bit(0)=1; else */
+ /* bit(0) - high true edge sensitive */
+ /* bit(1) - low true edge sensitive */
+ /* bit(2) - high true level sensitive*/
+ /* bit(3) - low true level sensitive */
+ /* bit(7:4) - must be 0 */
+ } S4_Pack;
+
+ struct _S5_Pack{ /* DMA PACKET */
+ unsigned char Tag; /* small tag = 0x2a */
+ unsigned char DMAMask; /* bit(0) is channel 0 ... */
+ unsigned char DMAInfo;
+ } S5_Pack;
+
+ struct _S6_Pack{ /* START DEPENDENT FUNCTION PACKET */
+ unsigned char Tag; /* small tag = 0x30 or 0x31 */
+ unsigned char Priority; /* Optional; if missing then x01; else*/
+ /* x00 = best possible */
+ /* x01 = acceptible */
+ /* x02 = sub-optimal but functional */
+ } S6_Pack;
+
+ struct _S7_Pack{ /* END DEPENDENT FUNCTION PACKET */
+ unsigned char Tag; /* small tag = 0x38 */
+ } S7_Pack;
+
+ struct _S8_Pack{ /* VARIABLE I/O PORT PACKET */
+ unsigned char Tag; /* small tag x47 */
+ unsigned char IOInfo; /* x0 = decode only bits(9:0); */
+#define ISAAddr16bit 0x01 /* x01 = decode bits(15:0) */
+ unsigned char RangeMin[2]; /* Min base address */
+ unsigned char RangeMax[2]; /* Max base address */
+ unsigned char IOAlign; /* base alignmt, incr in 1B blocks */
+ unsigned char IONum; /* number of contiguous I/O ports */
+ } S8_Pack;
+
+ struct _S9_Pack{ /* FIXED I/O PORT PACKET */
+ unsigned char Tag; /* small tag = 0x4b */
+ unsigned char Range[2]; /* base address 10 bits */
+ unsigned char IONum; /* number of contiguous I/O ports */
+ } S9_Pack;
+
+ struct _S14_Pack{ /* VENDOR DEFINED PACKET */
+ unsigned char Tag; /* small tag = 0x7m m = 1-7 */
+ union _S14_Data{
+ unsigned char Data[7]; /* Vendor defined */
+ struct _S14_PPCPack{ /* Pr*p s14 pack */
+ unsigned char Type; /* 00=non-IBM */
+ unsigned char PPCData[6]; /* Vendor defined */
+ } S14_PPCPack;
+ } S14_Data;
+ } S14_Pack;
+
+ struct _S15_Pack{ /* END PACKET */
+ unsigned char Tag; /* small tag = 0x78 or 0x79 */
+ unsigned char Check; /* optional - checksum */
+ } S15_Pack;
+
+ struct _L1_Pack{ /* MEMORY RANGE PACKET */
+ unsigned char Tag; /* large tag = 0x81 */
+ unsigned char Count0; /* x09 */
+ unsigned char Count1; /* x00 */
+ unsigned char Data[9]; /* a variable array of bytes, */
+ /* count in tag */
+ } L1_Pack;
+
+ struct _L2_Pack{ /* ANSI ID STRING PACKET */
+ unsigned char Tag; /* large tag = 0x82 */
+ unsigned char Count0; /* Length of string */
+ unsigned char Count1;
+ unsigned char Identifier[1]; /* a variable array of bytes, */
+ /* count in tag */
+ } L2_Pack;
+
+ struct _L3_Pack{ /* UNICODE ID STRING PACKET */
+ unsigned char Tag; /* large tag = 0x83 */
+ unsigned char Count0; /* Length + 2 of string */
+ unsigned char Count1;
+ unsigned char Country0; /* TBD */
+ unsigned char Country1; /* TBD */
+ unsigned char Identifier[1]; /* a variable array of bytes, */
+ /* count in tag */
+ } L3_Pack;
+
+ struct _L4_Pack{ /* VENDOR DEFINED PACKET */
+ unsigned char Tag; /* large tag = 0x84 */
+ unsigned char Count0;
+ unsigned char Count1;
+ union _L4_Data{
+ unsigned char Data[1]; /* a variable array of bytes, */
+ /* count in tag */
+ struct _L4_PPCPack{ /* Pr*p L4 packet */
+ unsigned char Type; /* 00=non-IBM */
+ unsigned char PPCData[1]; /* a variable array of bytes, */
+ /* count in tag */
+ } L4_PPCPack;
+ } L4_Data;
+ } L4_Pack;
+
+ struct _L5_Pack{
+ unsigned char Tag; /* large tag = 0x85 */
+ unsigned char Count0; /* Count = 17 */
+ unsigned char Count1;
+ unsigned char Data[17];
+ } L5_Pack;
+
+ struct _L6_Pack{
+ unsigned char Tag; /* large tag = 0x86 */
+ unsigned char Count0; /* Count = 9 */
+ unsigned char Count1;
+ unsigned char Data[9];
+ } L6_Pack;
+
+ } PnP_TAG_PACKET;
+
+#endif /* __ASSEMBLY__ */
+#endif /* ndef _PNP_ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/poll.h b/include/asm-ppc/poll.h
new file mode 100644
index 0000000..be50249
--- /dev/null
+++ b/include/asm-ppc/poll.h
@@ -0,0 +1,23 @@
+#ifndef __PPC_POLL_H
+#define __PPC_POLL_H
+
+#define POLLIN 0x0001
+#define POLLPRI 0x0002
+#define POLLOUT 0x0004
+#define POLLERR 0x0008
+#define POLLHUP 0x0010
+#define POLLNVAL 0x0020
+#define POLLRDNORM 0x0040
+#define POLLRDBAND 0x0080
+#define POLLWRNORM 0x0100
+#define POLLWRBAND 0x0200
+#define POLLMSG 0x0400
+#define POLLREMOVE 0x1000
+
+struct pollfd {
+ int fd;
+ short events;
+ short revents;
+};
+
+#endif
diff --git a/include/asm-ppc/posix_types.h b/include/asm-ppc/posix_types.h
new file mode 100644
index 0000000..a14a82a
--- /dev/null
+++ b/include/asm-ppc/posix_types.h
@@ -0,0 +1,111 @@
+#ifndef _PPC_POSIX_TYPES_H
+#define _PPC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned int __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned int __kernel_old_uid_t;
+typedef unsigned int __kernel_old_gid_t;
+typedef unsigned int __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+ int val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+#define __FD_ZERO(set) \
+ ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
+ || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+ unsigned int *tmp = (unsigned int *)p->fds_bits;
+ int i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 8:
+ tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0;
+ tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0;
+ return;
+ }
+ }
+ i = __FDSET_LONGS;
+ while (i) {
+ i--;
+ *tmp = 0;
+ tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* __GNUC__ */
+#endif /* _PPC_POSIX_TYPES_H */
diff --git a/include/asm-ppc/ppc4xx_dma.h b/include/asm-ppc/ppc4xx_dma.h
new file mode 100644
index 0000000..8636cdb
--- /dev/null
+++ b/include/asm-ppc/ppc4xx_dma.h
@@ -0,0 +1,583 @@
+/*
+ * include/asm-ppc/ppc4xx_dma.h
+ *
+ * IBM PPC4xx DMA engine library
+ *
+ * Copyright 2000-2004 MontaVista Software Inc.
+ *
+ * Cleaned up a bit more, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Original code by Armin Kuster <akuster@mvista.com>
+ * and Pete Popov <ppopov@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASMPPC_PPC4xx_DMA_H
+#define __ASMPPC_PPC4xx_DMA_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/mmu.h>
+#include <asm/ibm4xx.h>
+
+#undef DEBUG_4xxDMA
+
+#define MAX_PPC4xx_DMA_CHANNELS 4
+
+/* in arch/ppc/kernel/setup.c -- Cort */
+extern unsigned long DMA_MODE_WRITE, DMA_MODE_READ;
+
+/*
+ * Function return status codes
+ * These values are used to indicate whether or not the function
+ * call was successful, or a bad/invalid parameter was passed.
+ */
+#define DMA_STATUS_GOOD 0
+#define DMA_STATUS_BAD_CHANNEL 1
+#define DMA_STATUS_BAD_HANDLE 2
+#define DMA_STATUS_BAD_MODE 3
+#define DMA_STATUS_NULL_POINTER 4
+#define DMA_STATUS_OUT_OF_MEMORY 5
+#define DMA_STATUS_SGL_LIST_EMPTY 6
+#define DMA_STATUS_GENERAL_ERROR 7
+#define DMA_STATUS_CHANNEL_NOTFREE 8
+
+#define DMA_CHANNEL_BUSY 0x80000000
+
+/*
+ * These indicate status as returned from the DMA Status Register.
+ */
+#define DMA_STATUS_NO_ERROR 0
+#define DMA_STATUS_CS 1 /* Count Status */
+#define DMA_STATUS_TS 2 /* Transfer Status */
+#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */
+#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */
+
+
+/*
+ * DMA Channel Control Registers
+ */
+
+#ifdef CONFIG_44x
+#define PPC4xx_DMA_64BIT
+#define DMA_CR_OFFSET 1
+#else
+#define DMA_CR_OFFSET 0
+#endif
+
+#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */
+#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31)
+#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31)
+
+#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */
+#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30)
+#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30)
+
+#define DMA_TD (1<<29)
+#define SET_DMA_TD(x) (((x)&0x1)<<29)
+#define GET_DMA_TD(x) (((x)&DMA_TD)>>29)
+
+#define DMA_PL (1<<28) /* Peripheral Location */
+#define SET_DMA_PL(x) (((x)&0x1)<<28)
+#define GET_DMA_PL(x) (((x)&DMA_PL)>>28)
+
+#define EXTERNAL_PERIPHERAL 0
+#define INTERNAL_PERIPHERAL 1
+
+#define SET_DMA_PW(x) (((x)&0x3)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */
+#define DMA_PW_MASK SET_DMA_PW(3)
+#define PW_8 0
+#define PW_16 1
+#define PW_32 2
+#define PW_64 3
+/* FIXME: Add PW_128 support for 440GP DMA block */
+#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET))
+
+#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */
+#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET))
+
+#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */
+#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET))
+
+#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */
+#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET))
+
+#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */
+#define DMA_TM_MASK SET_DMA_TM(3)
+#define TM_PERIPHERAL 0 /* Peripheral */
+#define TM_RESERVED 1 /* Reserved */
+#define TM_S_MM 2 /* Memory to Memory */
+#define TM_D_MM 3 /* Device Paced Memory to Memory */
+#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET))
+
+#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */
+#define DMA_PSC_MASK SET_DMA_PSC(3)
+#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET))
+
+#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */
+#define DMA_PWC_MASK SET_DMA_PWC(0x3F)
+#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET))
+
+#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */
+#define DMA_PHC_MASK SET_DMA_PHC(0x7)
+#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET))
+
+#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */
+#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET))
+
+#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET))
+#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET))
+
+#define DMA_DEC (1<<(2)) /* Address Decrement */
+#define SET_DMA_DEC(x) (((x)&0x1)<<2)
+#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2)
+
+
+/*
+ * Transfer Modes
+ * These modes are defined in a way that makes it possible to
+ * simply "or" in the value in the control register.
+ */
+
+#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */
+
+ /* Device-paced memory to memory, */
+ /* device is at source address */
+#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM))
+
+ /* Device-paced memory to memory, */
+ /* device is at destination address */
+#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM))
+
+/* 405gp/440gp */
+#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */
+#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3)
+#define PREFETCH_1 0 /* Prefetch 1 Double Word */
+#define PREFETCH_2 1
+#define PREFETCH_4 2
+#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET))
+
+#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */
+#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET))
+#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET))
+
+/* stb3x */
+
+#define DMA_ECE_ENABLE (1<<5)
+#define SET_DMA_ECE(x) (((x)&0x1)<<5)
+#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5)
+
+#define DMA_TCD_DISABLE (1<<4)
+#define SET_DMA_TCD(x) (((x)&0x1)<<4)
+#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4)
+
+typedef uint32_t sgl_handle_t;
+
+#ifdef CONFIG_PPC4xx_EDMA
+
+#define SGL_LIST_SIZE 4096
+#define DMA_PPC4xx_SIZE SGL_LIST_SIZE
+
+#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */
+#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3)
+#define PRIORITY_LOW 0
+#define PRIORITY_MID_LOW 1
+#define PRIORITY_MID_HIGH 2
+#define PRIORITY_HIGH 3
+#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET))
+
+/*
+ * DMA Polarity Configuration Register
+ */
+#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3)))
+#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3)))
+#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */
+
+/*
+ * DMA Sleep Mode Register
+ */
+#define SLEEP_MODE_ENABLE (1<<21)
+
+/*
+ * DMA Status Register
+ */
+#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
+#define DMA_CS1 (1<<30)
+#define DMA_CS2 (1<<29)
+#define DMA_CS3 (1<<28)
+
+#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
+#define DMA_TS1 (1<<26)
+#define DMA_TS2 (1<<25)
+#define DMA_TS3 (1<<24)
+
+#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
+#define DMA_CH1_ERR (1<<22)
+#define DMA_CH2_ERR (1<<21)
+#define DMA_CH3_ERR (1<<20)
+
+#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */
+#define DMA_IN_DMA_REQ1 (1<<18)
+#define DMA_IN_DMA_REQ2 (1<<17)
+#define DMA_IN_DMA_REQ3 (1<<16)
+
+#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */
+#define DMA_EXT_DMA_REQ1 (1<<14)
+#define DMA_EXT_DMA_REQ2 (1<<13)
+#define DMA_EXT_DMA_REQ3 (1<<12)
+
+#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */
+#define DMA_CH1_BUSY (1<<10)
+#define DMA_CH2_BUSY (1<<9)
+#define DMA_CH3_BUSY (1<<8)
+
+#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */
+#define DMA_SG1 (1<<6)
+#define DMA_SG2 (1<<5)
+#define DMA_SG3 (1<<4)
+
+/* DMA Channel Count Register */
+#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */
+#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */
+#define DMA_CTC_BSIZ_2 (0)
+#define DMA_CTC_BSIZ_4 (1<<21)
+#define DMA_CTC_BSIZ_8 (2<<21)
+#define DMA_CTC_BSIZ_16 (3<<21)
+
+/*
+ * DMA SG Command Register
+ */
+#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */
+#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */
+
+/*
+ * DMA Scatter/Gather Descriptor Bit fields
+ */
+#define SG_LINK (1<<31) /* Link */
+#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */
+#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */
+#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */
+#define SG_COUNT_MASK 0xFFFF /* Count Field */
+
+#define SET_DMA_CONTROL \
+ (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
+ SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\
+ SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
+ SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
+ SET_DMA_PL(p_init->pl) | /* peripheral location */ \
+ SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
+ SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
+ SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
+ SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
+ SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
+ SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
+ SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
+ SET_DMA_PREFETCH(p_init->pf) /* read prefetch */)
+
+#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan))
+
+#elif defined(CONFIG_STBXXX_DMA) /* stb03xxx */
+
+#define DMA_PPC4xx_SIZE 4096
+
+/*
+ * DMA Status Register
+ */
+
+#define SET_DMA_PRIORITY(x) (((x)&0x00800001)) /* DMA Channel Priority */
+#define DMA_PRIORITY_MASK 0x00800001
+#define PRIORITY_LOW 0x00000000
+#define PRIORITY_MID_LOW 0x00000001
+#define PRIORITY_MID_HIGH 0x00800000
+#define PRIORITY_HIGH 0x00800001
+#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001))
+
+#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
+#define DMA_CS1 (1<<30)
+#define DMA_CS2 (1<<29)
+#define DMA_CS3 (1<<28)
+
+#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
+#define DMA_TS1 (1<<26)
+#define DMA_TS2 (1<<25)
+#define DMA_TS3 (1<<24)
+
+#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
+#define DMA_CH1_ERR (1<<22)
+#define DMA_CH2_ERR (1<<21)
+#define DMA_CH3_ERR (1<<20)
+
+#define DMA_CT0 (1<<19) /* Chained transfere */
+
+#define DMA_IN_DMA_REQ0 (1<<18) /* Internal DMA Request is pending */
+#define DMA_IN_DMA_REQ1 (1<<17)
+#define DMA_IN_DMA_REQ2 (1<<16)
+#define DMA_IN_DMA_REQ3 (1<<15)
+
+#define DMA_EXT_DMA_REQ0 (1<<14) /* External DMA Request is pending */
+#define DMA_EXT_DMA_REQ1 (1<<13)
+#define DMA_EXT_DMA_REQ2 (1<<12)
+#define DMA_EXT_DMA_REQ3 (1<<11)
+
+#define DMA_CH0_BUSY (1<<10) /* DMA Channel 0 Busy */
+#define DMA_CH1_BUSY (1<<9)
+#define DMA_CH2_BUSY (1<<8)
+#define DMA_CH3_BUSY (1<<7)
+
+#define DMA_CT1 (1<<6) /* Chained transfere */
+#define DMA_CT2 (1<<5)
+#define DMA_CT3 (1<<4)
+
+#define DMA_CH_ENABLE (1<<7)
+#define SET_DMA_CH(x) (((x)&0x1)<<7)
+#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7)
+
+/* STBx25xxx dma unique */
+/* enable device port on a dma channel
+ * example ext 0 on dma 1
+ */
+
+#define SSP0_RECV 15
+#define SSP0_XMIT 14
+#define EXT_DMA_0 12
+#define SC1_XMIT 11
+#define SC1_RECV 10
+#define EXT_DMA_2 9
+#define EXT_DMA_3 8
+#define SERIAL2_XMIT 7
+#define SERIAL2_RECV 6
+#define SC0_XMIT 5
+#define SC0_RECV 4
+#define SERIAL1_XMIT 3
+#define SERIAL1_RECV 2
+#define SERIAL0_XMIT 1
+#define SERIAL0_RECV 0
+
+#define DMA_CHAN_0 1
+#define DMA_CHAN_1 2
+#define DMA_CHAN_2 3
+#define DMA_CHAN_3 4
+
+/* end STBx25xx */
+
+/*
+ * Bit 30 must be one for Redwoods, otherwise transfers may receive errors.
+ */
+#define DMA_CR_MB0 0x2
+
+#define SET_DMA_CONTROL \
+ (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
+ SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
+ SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
+ SET_DMA_PL(p_init->pl) | /* peripheral location */ \
+ SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
+ SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
+ SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
+ SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
+ SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
+ SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
+ SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
+ SET_DMA_TCD(p_init->tcd_disable) | /* TC chain mode disable */ \
+ SET_DMA_ECE(p_init->ece_enable) | /* ECE chanin mode enable */ \
+ SET_DMA_CH(p_init->ch_enable) | /* Chain enable */ \
+ DMA_CR_MB0 /* must be one */)
+
+#define GET_DMA_POLARITY(chan) chan
+
+#endif
+
+typedef struct {
+ unsigned short in_use; /* set when channel is being used, clr when
+ * available.
+ */
+ /*
+ * Valid polarity settings:
+ * DMAReq_ActiveLow(n)
+ * DMAAck_ActiveLow(n)
+ * EOT_ActiveLow(n)
+ *
+ * n is 0 to max dma chans
+ */
+ unsigned int polarity;
+
+ char buffer_enable; /* Boolean: buffer enable */
+ char tce_enable; /* Boolean: terminal count enable */
+ char etd_output; /* Boolean: eot pin is a tc output */
+ char pce; /* Boolean: parity check enable */
+
+ /*
+ * Peripheral location:
+ * INTERNAL_PERIPHERAL (UART0 on the 405GP)
+ * EXTERNAL_PERIPHERAL
+ */
+ char pl; /* internal/external peripheral */
+
+ /*
+ * Valid pwidth settings:
+ * PW_8
+ * PW_16
+ * PW_32
+ * PW_64
+ */
+ unsigned int pwidth;
+
+ char dai; /* Boolean: dst address increment */
+ char sai; /* Boolean: src address increment */
+
+ /*
+ * Valid psc settings: 0-3
+ */
+ unsigned int psc; /* Peripheral Setup Cycles */
+
+ /*
+ * Valid pwc settings:
+ * 0-63
+ */
+ unsigned int pwc; /* Peripheral Wait Cycles */
+
+ /*
+ * Valid phc settings:
+ * 0-7
+ */
+ unsigned int phc; /* Peripheral Hold Cycles */
+
+ /*
+ * Valid cp (channel priority) settings:
+ * PRIORITY_LOW
+ * PRIORITY_MID_LOW
+ * PRIORITY_MID_HIGH
+ * PRIORITY_HIGH
+ */
+ unsigned int cp; /* channel priority */
+
+ /*
+ * Valid pf (memory read prefetch) settings:
+ *
+ * PREFETCH_1
+ * PREFETCH_2
+ * PREFETCH_4
+ */
+ unsigned int pf; /* memory read prefetch */
+
+ /*
+ * Boolean: channel interrupt enable
+ * NOTE: for sgl transfers, only the last descriptor will be setup to
+ * interrupt.
+ */
+ char int_enable;
+
+ char shift; /* easy access to byte_count shift, based on */
+ /* the width of the channel */
+
+ uint32_t control; /* channel control word */
+
+ /* These variabled are used ONLY in single dma transfers */
+ unsigned int mode; /* transfer mode */
+ phys_addr_t addr;
+ char ce; /* channel enable */
+#ifdef CONFIG_STB03xxx
+ char ch_enable;
+ char tcd_disable;
+ char ece_enable;
+ char td; /* transfer direction */
+#endif
+
+ char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */
+} ppc_dma_ch_t;
+
+/*
+ * PPC44x DMA implementations have a slightly different
+ * descriptor layout. Probably moved about due to the
+ * change to 64-bit addresses and link pointer. I don't
+ * know why they didn't just leave control_count after
+ * the dst_addr.
+ */
+#ifdef PPC4xx_DMA_64BIT
+typedef struct {
+ uint32_t control;
+ uint32_t control_count;
+ phys_addr_t src_addr;
+ phys_addr_t dst_addr;
+ phys_addr_t next;
+} ppc_sgl_t;
+#else
+typedef struct {
+ uint32_t control;
+ phys_addr_t src_addr;
+ phys_addr_t dst_addr;
+ uint32_t control_count;
+ uint32_t next;
+} ppc_sgl_t;
+#endif
+
+typedef struct {
+ unsigned int dmanr;
+ uint32_t control; /* channel ctrl word; loaded from each descrptr */
+ uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */
+ dma_addr_t dma_addr; /* dma (physical) address of this list */
+ ppc_sgl_t *phead;
+ dma_addr_t phead_dma;
+ ppc_sgl_t *ptail;
+ dma_addr_t ptail_dma;
+} sgl_list_info_t;
+
+typedef struct {
+ phys_addr_t *src_addr;
+ phys_addr_t *dst_addr;
+ phys_addr_t dma_src_addr;
+ phys_addr_t dma_dst_addr;
+} pci_alloc_desc_t;
+
+extern ppc_dma_ch_t dma_channels[];
+
+/*
+ * The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c
+ */
+extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *);
+extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *);
+extern int ppc4xx_set_channel_priority(unsigned int, unsigned int);
+extern unsigned int ppc4xx_get_peripheral_width(unsigned int);
+extern void ppc4xx_set_sg_addr(int, phys_addr_t);
+extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int);
+extern void ppc4xx_enable_dma_sgl(sgl_handle_t);
+extern void ppc4xx_disable_dma_sgl(sgl_handle_t);
+extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *);
+extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *);
+extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int);
+extern void ppc4xx_free_dma_handle(sgl_handle_t);
+extern int ppc4xx_get_dma_status(void);
+extern int ppc4xx_enable_burst(unsigned int);
+extern int ppc4xx_disable_burst(unsigned int);
+extern int ppc4xx_set_burst_size(unsigned int, unsigned int);
+extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr);
+extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr);
+extern void ppc4xx_enable_dma(unsigned int dmanr);
+extern void ppc4xx_disable_dma(unsigned int dmanr);
+extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count);
+extern int ppc4xx_get_dma_residue(unsigned int dmanr);
+extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
+ phys_addr_t dst_dma_addr);
+extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr);
+extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr);
+extern int ppc4xx_clr_dma_status(unsigned int dmanr);
+extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
+extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
+extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode);
+
+/* These are in kernel/dma.c: */
+
+/* reserve a DMA channel */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+/* release it again */
+extern void free_dma(unsigned int dmanr);
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ppc4xx_pic.h b/include/asm-ppc/ppc4xx_pic.h
new file mode 100644
index 0000000..c16c7f8
--- /dev/null
+++ b/include/asm-ppc/ppc4xx_pic.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-ppc/ppc4xx_pic.h
+ *
+ * Interrupt controller driver for PowerPC 4xx-based processors.
+ *
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PPC4XX_PIC_H__
+#define __PPC4XX_PIC_H__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+
+/* "Fixed" UIC settings (they are chip, not board specific),
+ * e.g. polarity/triggerring for internal interrupt sources.
+ *
+ * Platform port should provide NR_UICS-sized array named ppc4xx_core_uic_cfg
+ * with these "fixed" settings: .polarity contains exact value which will
+ * be written (masked with "ext_irq_mask") into UICx_PR register,
+ * .triggering - to UICx_TR.
+ *
+ * Settings for external IRQs can be specified separately by the
+ * board support code. In this case properly sized array of unsigned
+ * char named ppc4xx_uic_ext_irq_cfg should be filled with correct
+ * values using IRQ_SENSE_XXXXX and IRQ_POLARITY_XXXXXXX defines.
+ *
+ * If these arrays aren't provided, UIC initialization code keeps firmware
+ * configuration. Also, ppc4xx_uic_ext_irq_cfg implies ppc4xx_core_uic_cfg
+ * is defined.
+ *
+ * Both ppc4xx_core_uic_cfg and ppc4xx_uic_ext_irq_cfg are declared as
+ * "weak" symbols in ppc4xx_pic.c
+ *
+ */
+struct ppc4xx_uic_settings {
+ u32 polarity;
+ u32 triggering;
+ u32 ext_irq_mask;
+};
+
+extern void ppc4xx_pic_init(void);
+
+#endif /* __PPC4XX_PIC_H__ */
diff --git a/include/asm-ppc/ppc_asm.h b/include/asm-ppc/ppc_asm.h
new file mode 100644
index 0000000..13fa8e7
--- /dev/null
+++ b/include/asm-ppc/ppc_asm.h
@@ -0,0 +1,342 @@
+/*
+ * include/asm-ppc/ppc_asm.h
+ *
+ * Definitions used by various bits of low-level assembly code on PowerPC.
+ *
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base)
+#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base)
+#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+#define SAVE_NVGPRS(base) SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
+ SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base) REST_GPR(13, base); REST_8GPRS(14, base); \
+ REST_10GPRS(22, base)
+
+#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*(n)(base)
+#define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base)
+#define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
+#define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
+#define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
+#define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
+#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*(n)(base)
+#define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base)
+#define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base)
+#define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base)
+#define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base)
+#define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base)
+
+#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base
+#define SAVE_2VR(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
+#define SAVE_4VR(n,b,base) SAVE_2VR(n,b,base); SAVE_2VR(n+2,b,base)
+#define SAVE_8VR(n,b,base) SAVE_4VR(n,b,base); SAVE_4VR(n+4,b,base)
+#define SAVE_16VR(n,b,base) SAVE_8VR(n,b,base); SAVE_8VR(n+8,b,base)
+#define SAVE_32VR(n,b,base) SAVE_16VR(n,b,base); SAVE_16VR(n+16,b,base)
+#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_2VR(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base)
+#define REST_4VR(n,b,base) REST_2VR(n,b,base); REST_2VR(n+2,b,base)
+#define REST_8VR(n,b,base) REST_4VR(n,b,base); REST_4VR(n+4,b,base)
+#define REST_16VR(n,b,base) REST_8VR(n,b,base); REST_8VR(n+8,b,base)
+#define REST_32VR(n,b,base) REST_16VR(n,b,base); REST_16VR(n+16,b,base)
+
+#define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base)
+#define SAVE_2EVR(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base)
+#define SAVE_4EVR(n,s,base) SAVE_2EVR(n,s,base); SAVE_2EVR(n+2,s,base)
+#define SAVE_8EVR(n,s,base) SAVE_4EVR(n,s,base); SAVE_4EVR(n+4,s,base)
+#define SAVE_16EVR(n,s,base) SAVE_8EVR(n,s,base); SAVE_8EVR(n+8,s,base)
+#define SAVE_32EVR(n,s,base) SAVE_16EVR(n,s,base); SAVE_16EVR(n+16,s,base)
+
+#define REST_EVR(n,s,base) lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n
+#define REST_2EVR(n,s,base) REST_EVR(n,s,base); REST_EVR(n+1,s,base)
+#define REST_4EVR(n,s,base) REST_2EVR(n,s,base); REST_2EVR(n+2,s,base)
+#define REST_8EVR(n,s,base) REST_4EVR(n,s,base); REST_4EVR(n+4,s,base)
+#define REST_16EVR(n,s,base) REST_8EVR(n,s,base); REST_8EVR(n+8,s,base)
+#define REST_32EVR(n,s,base) REST_16EVR(n,s,base); REST_16EVR(n+16,s,base)
+
+#ifdef CONFIG_PPC601_SYNC_FIX
+#define SYNC \
+BEGIN_FTR_SECTION \
+ sync; \
+ isync; \
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define SYNC_601 \
+BEGIN_FTR_SECTION \
+ sync; \
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define ISYNC_601 \
+BEGIN_FTR_SECTION \
+ isync; \
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#else
+#define SYNC
+#define SYNC_601
+#define ISYNC_601
+#endif
+
+#ifndef CONFIG_SMP
+#define TLBSYNC
+#else /* CONFIG_SMP */
+/* tlbsync is not implemented on 601 */
+#define TLBSYNC \
+BEGIN_FTR_SECTION \
+ tlbsync; \
+ sync; \
+END_FTR_SECTION_IFCLR(CPU_FTR_601)
+#endif
+
+/*
+ * This instruction is not implemented on the PPC 603 or 601; however, on
+ * the 403GCX and 405GP tlbia IS defined and tlbie is not.
+ * All of these instructions exist in the 8xx, they have magical powers,
+ * and they must be used.
+ */
+
+#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
+#define tlbia \
+ li r4,1024; \
+ mtctr r4; \
+ lis r4,KERNELBASE@h; \
+0: tlbie r4; \
+ addi r4,r4,0x1000; \
+ bdnz 0b
+#endif
+
+#ifdef CONFIG_BOOKE
+#define tophys(rd,rs) \
+ addis rd,rs,0
+
+#define tovirt(rd,rs) \
+ addis rd,rs,0
+
+#else /* CONFIG_BOOKE */
+/*
+ * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
+ * physical base address of RAM at compile time.
+ */
+#define tophys(rd,rs) \
+0: addis rd,rs,-KERNELBASE@h; \
+ .section ".vtop_fixup","aw"; \
+ .align 1; \
+ .long 0b; \
+ .previous
+
+#define tovirt(rd,rs) \
+0: addis rd,rs,KERNELBASE@h; \
+ .section ".ptov_fixup","aw"; \
+ .align 1; \
+ .long 0b; \
+ .previous
+#endif /* CONFIG_BOOKE */
+
+/*
+ * On 64-bit cpus, we use the rfid instruction instead of rfi, but
+ * we then have to make sure we preserve the top 32 bits except for
+ * the 64-bit mode bit, which we clear.
+ */
+#ifdef CONFIG_PPC64BRIDGE
+#define FIX_SRR1(ra, rb) \
+ mr rb,ra; \
+ mfmsr ra; \
+ clrldi ra,ra,1; /* turn off 64-bit mode */ \
+ rldimi ra,rb,0,32
+#define RFI .long 0x4c000024 /* rfid instruction */
+#define MTMSRD(r) .long (0x7c000164 + ((r) << 21)) /* mtmsrd */
+#define CLR_TOP32(r) rlwinm (r),(r),0,0,31 /* clear top 32 bits */
+
+#else
+#define FIX_SRR1(ra, rb)
+#ifndef CONFIG_40x
+#define RFI rfi
+#else
+#define RFI rfi; b . /* Prevent prefetch past rfi */
+#endif
+#define MTMSRD(r) mtmsr r
+#define CLR_TOP32(r)
+#endif /* CONFIG_PPC64BRIDGE */
+
+#define RFMCI .long 0x4c00004c /* rfmci instruction */
+
+#ifdef CONFIG_IBM405_ERR77
+#define PPC405_ERR77(ra,rb) dcbt ra, rb;
+#define PPC405_ERR77_SYNC sync;
+#else
+#define PPC405_ERR77(ra,rb)
+#define PPC405_ERR77_SYNC
+#endif
+
+/* The boring bits... */
+
+/* Condition Register Bit Fields */
+
+#define cr0 0
+#define cr1 1
+#define cr2 2
+#define cr3 3
+#define cr4 4
+#define cr5 5
+#define cr6 6
+#define cr7 7
+
+
+/* General Purpose Registers (GPRs) */
+
+#define r0 0
+#define r1 1
+#define r2 2
+#define r3 3
+#define r4 4
+#define r5 5
+#define r6 6
+#define r7 7
+#define r8 8
+#define r9 9
+#define r10 10
+#define r11 11
+#define r12 12
+#define r13 13
+#define r14 14
+#define r15 15
+#define r16 16
+#define r17 17
+#define r18 18
+#define r19 19
+#define r20 20
+#define r21 21
+#define r22 22
+#define r23 23
+#define r24 24
+#define r25 25
+#define r26 26
+#define r27 27
+#define r28 28
+#define r29 29
+#define r30 30
+#define r31 31
+
+
+/* Floating Point Registers (FPRs) */
+
+#define fr0 0
+#define fr1 1
+#define fr2 2
+#define fr3 3
+#define fr4 4
+#define fr5 5
+#define fr6 6
+#define fr7 7
+#define fr8 8
+#define fr9 9
+#define fr10 10
+#define fr11 11
+#define fr12 12
+#define fr13 13
+#define fr14 14
+#define fr15 15
+#define fr16 16
+#define fr17 17
+#define fr18 18
+#define fr19 19
+#define fr20 20
+#define fr21 21
+#define fr22 22
+#define fr23 23
+#define fr24 24
+#define fr25 25
+#define fr26 26
+#define fr27 27
+#define fr28 28
+#define fr29 29
+#define fr30 30
+#define fr31 31
+
+#define vr0 0
+#define vr1 1
+#define vr2 2
+#define vr3 3
+#define vr4 4
+#define vr5 5
+#define vr6 6
+#define vr7 7
+#define vr8 8
+#define vr9 9
+#define vr10 10
+#define vr11 11
+#define vr12 12
+#define vr13 13
+#define vr14 14
+#define vr15 15
+#define vr16 16
+#define vr17 17
+#define vr18 18
+#define vr19 19
+#define vr20 20
+#define vr21 21
+#define vr22 22
+#define vr23 23
+#define vr24 24
+#define vr25 25
+#define vr26 26
+#define vr27 27
+#define vr28 28
+#define vr29 29
+#define vr30 30
+#define vr31 31
+
+#define evr0 0
+#define evr1 1
+#define evr2 2
+#define evr3 3
+#define evr4 4
+#define evr5 5
+#define evr6 6
+#define evr7 7
+#define evr8 8
+#define evr9 9
+#define evr10 10
+#define evr11 11
+#define evr12 12
+#define evr13 13
+#define evr14 14
+#define evr15 15
+#define evr16 16
+#define evr17 17
+#define evr18 18
+#define evr19 19
+#define evr20 20
+#define evr21 21
+#define evr22 22
+#define evr23 23
+#define evr24 24
+#define evr25 25
+#define evr26 26
+#define evr27 27
+#define evr28 28
+#define evr29 29
+#define evr30 30
+#define evr31 31
+
+/* some stab codes */
+#define N_FUN 36
+#define N_RSYM 64
+#define N_SLINE 68
+#define N_SO 100
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
new file mode 100644
index 0000000..24b991c
--- /dev/null
+++ b/include/asm-ppc/ppc_sys.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-ppc/ppc_sys.h
+ *
+ * PPC system definitions and library functions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_SYS_H
+#define __ASM_PPC_SYS_H
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/types.h>
+
+#if defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+#elif defined(CONFIG_85xx)
+#include <asm/mpc85xx.h>
+#elif defined(CONFIG_PPC_MPC52xx)
+#include <asm/mpc52xx.h>
+#else
+#error "need definition of ppc_sys_devices"
+#endif
+
+struct ppc_sys_spec {
+ /* PPC sys is matched via (ID & mask) == value, id could be
+ * PVR, SVR, IMMR, * etc. */
+ u32 mask;
+ u32 value;
+ u32 num_devices;
+ char *ppc_sys_name;
+ enum ppc_sys_devices *device_list;
+};
+
+/* describes all specific chips and which devices they have on them */
+extern struct ppc_sys_spec ppc_sys_specs[];
+extern struct ppc_sys_spec *cur_ppc_sys_spec;
+
+/* determine which specific SOC we are */
+extern void identify_ppc_sys_by_id(u32 id) __init;
+extern void identify_ppc_sys_by_name(char *name) __init;
+
+/* describes all devices that may exist in a given family of processors */
+extern struct platform_device ppc_sys_platform_devices[];
+
+/* allow any platform_device fixup to occur before device is registered */
+extern int (*ppc_sys_device_fixup) (struct platform_device * pdev);
+
+/* Update all memory resources by paddr, call before platform_device_register */
+extern void ppc_sys_fixup_mem_resource(struct platform_device *pdev,
+ phys_addr_t paddr) __init;
+
+/* Get platform_data pointer out of platform device, call before platform_device_register */
+extern void *ppc_sys_get_pdata(enum ppc_sys_devices dev) __init;
+
+/* remove a device from the system */
+extern void ppc_sys_device_remove(enum ppc_sys_devices dev);
+
+#endif /* __ASM_PPC_SYS_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h
new file mode 100644
index 0000000..fe24e45
--- /dev/null
+++ b/include/asm-ppc/ppcboot.h
@@ -0,0 +1,100 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_PPCBOOT_H__
+#define __ASM_PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+typedef struct bd_info {
+ unsigned long bi_memstart; /* start of DRAM memory */
+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+ unsigned long bi_sramstart; /* start of SRAM memory */
+ unsigned long bi_sramsize; /* size of SRAM memory */
+#if defined(CONFIG_8xx) || defined(CONFIG_CPM2) || defined(CONFIG_85xx) ||\
+ defined(CONFIG_83xx)
+ unsigned long bi_immr_base; /* base of IMMR register */
+#endif
+#if defined(CONFIG_PPC_MPC52xx)
+ unsigned long bi_mbar_base; /* base of internal registers */
+#endif
+ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet address */
+ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
+ unsigned long bi_intfreq; /* Internal Freq, in MHz */
+ unsigned long bi_busfreq; /* Bus Freq, in MHz */
+#if defined(CONFIG_CPM2)
+ unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
+ unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
+ unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
+ unsigned long bi_vco; /* VCO Out from PLL, in MHz */
+#endif
+#if defined(CONFIG_PPC_MPC52xx)
+ unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
+ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
+#endif
+ unsigned long bi_baudrate; /* Console Baudrate */
+#if defined(CONFIG_4xx)
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */
+ unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
+ unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
+#endif
+#if defined(CONFIG_HYMOD)
+ hymod_conf_t bi_hymod_conf; /* hymod configuration information */
+#endif
+#if defined(CONFIG_EVB64260) || defined(CONFIG_44x) || defined(CONFIG_85xx) ||\
+ defined(CONFIG_83xx)
+ /* second onboard ethernet port */
+ unsigned char bi_enet1addr[6];
+#endif
+#if defined(CONFIG_EVB64260) || defined(CONFIG_440GX) || defined(CONFIG_85xx)
+ /* third onboard ethernet ports */
+ unsigned char bi_enet2addr[6];
+#endif
+#if defined(CONFIG_440GX)
+ /* fourth onboard ethernet ports */
+ unsigned char bi_enet3addr[6];
+#endif
+#if defined(CONFIG_4xx)
+ unsigned int bi_opbfreq; /* OB clock in Hz */
+ int bi_iic_fast[2]; /* Use fast i2c mode */
+#endif
+#if defined(CONFIG_440GX)
+ int bi_phynum[4]; /* phy mapping */
+ int bi_phymode[4]; /* phy mode */
+#endif
+} bd_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_PPCBOOT_H__ */
diff --git a/include/asm-ppc/prep_nvram.h b/include/asm-ppc/prep_nvram.h
new file mode 100644
index 0000000..6dbc36a
--- /dev/null
+++ b/include/asm-ppc/prep_nvram.h
@@ -0,0 +1,153 @@
+/*
+ * PreP compliant NVRAM access
+ */
+
+/* Corey Minyard (minyard@acm.org) - Stolen from PReP book. Per the
+ license I must say:
+ (C) Copyright (Corey Minyard), (1998). All rights reserved
+ */
+
+/* Structure map for NVRAM on PowerPC Reference Platform */
+/* All fields are either character/byte strings which are valid either
+ endian or they are big-endian numbers.
+
+ There are a number of Date and Time fields which are in RTC format,
+ big-endian. These are stored in UT (GMT).
+
+ For enum's: if given in hex then they are bit significant, i.e. only
+ one bit is on for each enum.
+*/
+#ifdef __KERNEL__
+#ifndef _PPC_PREP_NVRAM_H
+#define _PPC_PREP_NVRAM_H
+
+#define MAX_PREP_NVRAM 0x8000
+#define PREP_NVRAM_AS0 0x74
+#define PREP_NVRAM_AS1 0x75
+#define PREP_NVRAM_DATA 0x77
+
+#define NVSIZE 4096 /* size of NVRAM */
+#define OSAREASIZE 512 /* size of OSArea space */
+#define CONFSIZE 1024 /* guess at size of Configuration space */
+
+typedef struct _SECURITY {
+ unsigned long BootErrCnt; /* Count of boot password errors */
+ unsigned long ConfigErrCnt; /* Count of config password errors */
+ unsigned long BootErrorDT[2]; /* Date&Time from RTC of last error in pw */
+ unsigned long ConfigErrorDT[2]; /* Date&Time from RTC of last error in pw */
+ unsigned long BootCorrectDT[2]; /* Date&Time from RTC of last correct pw */
+ unsigned long ConfigCorrectDT[2]; /* Date&Time from RTC of last correct pw */
+ unsigned long BootSetDT[2]; /* Date&Time from RTC of last set of pw */
+ unsigned long ConfigSetDT[2]; /* Date&Time from RTC of last set of pw */
+ unsigned char Serial[16]; /* Box serial number */
+} SECURITY;
+
+typedef enum _OS_ID {
+ Unknown = 0,
+ Firmware = 1,
+ AIX = 2,
+ NT = 3,
+ MKOS2 = 4,
+ MKAIX = 5,
+ Taligent = 6,
+ Solaris = 7,
+ MK = 12
+} OS_ID;
+
+typedef struct _ERROR_LOG {
+ unsigned char ErrorLogEntry[40]; /* To be architected */
+} ERROR_LOG;
+
+typedef enum _BOOT_STATUS {
+ BootStarted = 0x01,
+ BootFinished = 0x02,
+ RestartStarted = 0x04,
+ RestartFinished = 0x08,
+ PowerFailStarted = 0x10,
+ PowerFailFinished = 0x20,
+ ProcessorReady = 0x40,
+ ProcessorRunning = 0x80,
+ ProcessorStart = 0x0100
+} BOOT_STATUS;
+
+typedef struct _RESTART_BLOCK {
+ unsigned short Version;
+ unsigned short Revision;
+ unsigned long ResumeReserve1[2];
+ volatile unsigned long BootStatus;
+ unsigned long CheckSum; /* Checksum of RESTART_BLOCK */
+ void * RestartAddress;
+ void * SaveAreaAddr;
+ unsigned long SaveAreaLength;
+} RESTART_BLOCK;
+
+typedef enum _OSAREA_USAGE {
+ Empty = 0,
+ Used = 1
+} OSAREA_USAGE;
+
+typedef enum _PM_MODE {
+ Suspend = 0x80, /* Part of state is in memory */
+ Normal = 0x00 /* No power management in effect */
+} PMMODE;
+
+typedef struct _HEADER {
+ unsigned short Size; /* NVRAM size in K(1024) */
+ unsigned char Version; /* Structure map different */
+ unsigned char Revision; /* Structure map the same -may
+ be new values in old fields
+ in other words old code still works */
+ unsigned short Crc1; /* check sum from beginning of nvram to OSArea */
+ unsigned short Crc2; /* check sum of config */
+ unsigned char LastOS; /* OS_ID */
+ unsigned char Endian; /* B if big endian, L if little endian */
+ unsigned char OSAreaUsage; /* OSAREA_USAGE */
+ unsigned char PMMode; /* Shutdown mode */
+ RESTART_BLOCK RestartBlock;
+ SECURITY Security;
+ ERROR_LOG ErrorLog[2];
+
+ /* Global Environment information */
+ void * GEAddress;
+ unsigned long GELength;
+
+ /* Date&Time from RTC of last change to Global Environment */
+ unsigned long GELastWriteDT[2];
+
+ /* Configuration information */
+ void * ConfigAddress;
+ unsigned long ConfigLength;
+
+ /* Date&Time from RTC of last change to Configuration */
+ unsigned long ConfigLastWriteDT[2];
+ unsigned long ConfigCount; /* Count of entries in Configuration */
+
+ /* OS dependent temp area */
+ void * OSAreaAddress;
+ unsigned long OSAreaLength;
+
+ /* Date&Time from RTC of last change to OSAreaArea */
+ unsigned long OSAreaLastWriteDT[2];
+} HEADER;
+
+/* Here is the whole map of the NVRAM */
+typedef struct _NVRAM_MAP {
+ HEADER Header;
+ unsigned char GEArea[NVSIZE-CONFSIZE-OSAREASIZE-sizeof(HEADER)];
+ unsigned char OSArea[OSAREASIZE];
+ unsigned char ConfigArea[CONFSIZE];
+} NVRAM_MAP;
+
+/* Routines to manipulate the NVRAM */
+void init_prep_nvram(void);
+char *prep_nvram_get_var(const char *name);
+char *prep_nvram_first_var(void);
+char *prep_nvram_next_var(char *name);
+
+/* Routines to read and write directly to the NVRAM */
+unsigned char prep_nvram_read_val(int addr);
+void prep_nvram_write_val(int addr,
+ unsigned char val);
+
+#endif /* _PPC_PREP_NVRAM_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
new file mode 100644
index 0000000..b05b5d9
--- /dev/null
+++ b/include/asm-ppc/processor.h
@@ -0,0 +1,201 @@
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_PROCESSOR_H
+#define __ASM_PPC_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/config.h>
+#include <linux/stringify.h>
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+#include <asm/mpc8xx.h>
+#include <asm/reg.h>
+
+/* We only need to define a new _MACH_xxx for machines which are part of
+ * a configuration which supports more than one type of different machine.
+ * This is currently limited to CONFIG_PPC_MULTIPLATFORM and CHRP/PReP/PMac.
+ * -- Tom
+ */
+#define _MACH_prep 0x00000001
+#define _MACH_Pmac 0x00000002 /* pmac or pmac clone (non-chrp) */
+#define _MACH_chrp 0x00000004 /* chrp machine */
+
+/* see residual.h for these */
+#define _PREP_Motorola 0x01 /* motorola prep */
+#define _PREP_Firm 0x02 /* firmworks prep */
+#define _PREP_IBM 0x00 /* ibm prep */
+#define _PREP_Bull 0x03 /* bull prep */
+
+/* these are arbitrary */
+#define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */
+#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */
+#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */
+
+#define _GLOBAL(n)\
+ .stabs __stringify(n:F-1),N_FUN,0,0,n;\
+ .globl n;\
+n:
+
+/*
+ * this is the minimum allowable io space due to the location
+ * of the io areas on prep (first one at 0x80000000) but
+ * as soon as I get around to remapping the io areas with the BATs
+ * to match the mac we can raise this. -- Cort
+ */
+#define TASK_SIZE (CONFIG_TASK_SIZE)
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_MULTIPLATFORM
+extern int _machine;
+
+/* what kind of prep workstation we are */
+extern int _prep_type;
+extern int _chrp_type;
+
+/*
+ * This is used to identify the board type from a given PReP board
+ * vendor. Board revision is also made available.
+ */
+extern unsigned char ucSystemType;
+extern unsigned char ucBoardRev;
+extern unsigned char ucBoardRevMaj, ucBoardRevMin;
+#else
+#define _machine 0
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+struct task_struct;
+void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp);
+void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * Create a new kernel thread.
+ */
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Lazy FPU handling on uni-processor */
+extern struct task_struct *last_task_used_math;
+extern struct task_struct *last_task_used_altivec;
+extern struct task_struct *last_task_used_spe;
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3)
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+struct thread_struct {
+ unsigned long ksp; /* Kernel stack pointer */
+ struct pt_regs *regs; /* Pointer to saved register state */
+ mm_segment_t fs; /* for get_fs() validation */
+ void *pgdir; /* root of page-table tree */
+ int fpexc_mode; /* floating-point exception mode */
+ signed long last_syscall;
+#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
+ unsigned long dbcr0; /* debug control register values */
+ unsigned long dbcr1;
+#endif
+ double fpr[32]; /* Complete floating point set */
+ unsigned long fpscr_pad; /* fpr ... fpscr must be contiguous */
+ unsigned long fpscr; /* Floating point status */
+#ifdef CONFIG_ALTIVEC
+ /* Complete AltiVec register set */
+ vector128 vr[32] __attribute((aligned(16)));
+ /* AltiVec status */
+ vector128 vscr __attribute((aligned(16)));
+ unsigned long vrsave;
+ int used_vr; /* set if process has used altivec */
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+ unsigned long evr[32]; /* upper 32-bits of SPE regs */
+ u64 acc; /* Accumulator */
+ unsigned long spefscr; /* SPE & eFP status */
+ int used_spe; /* set if process has used spe */
+#endif /* CONFIG_SPE */
+};
+
+#define ARCH_MIN_TASKALIGN 16
+
+#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack)
+
+#define INIT_THREAD { \
+ .ksp = INIT_SP, \
+ .fs = KERNEL_DS, \
+ .pgdir = swapper_pg_dir, \
+ .fpexc_mode = MSR_FE0 | MSR_FE1, \
+}
+
+/*
+ * Return saved PC of a blocked thread. For now, this is the "user" PC
+ */
+#define thread_saved_pc(tsk) \
+ ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+#define KSTK_ESP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0)
+
+/* Get/set floating-point exception mode */
+#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr))
+#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val))
+
+extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr);
+extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val);
+
+static inline unsigned int __unpack_fe01(unsigned int msr_bits)
+{
+ return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8);
+}
+
+static inline unsigned int __pack_fe01(unsigned int fpmode)
+{
+ return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1);
+}
+
+/* in process.c - for early bootup debug -- Cort */
+int ll_printk(const char *, ...);
+void ll_puts(const char *);
+
+/* In misc.c */
+void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
+#define have_of (_machine == _MACH_chrp || _machine == _MACH_Pmac)
+
+#define cpu_relax() barrier()
+
+/*
+ * Prefetch macros.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+extern inline void prefetch(const void *x)
+{
+ __asm__ __volatile__ ("dcbt 0,%0" : : "r" (x));
+}
+
+extern inline void prefetchw(const void *x)
+{
+ __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x));
+}
+
+#define spin_lock_prefetch(x) prefetchw(x)
+
+extern int emulate_altivec(struct pt_regs *regs);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_PPC_PROCESSOR_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h
new file mode 100644
index 0000000..56394c6
--- /dev/null
+++ b/include/asm-ppc/prom.h
@@ -0,0 +1,143 @@
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_PROM_H
+#define _PPC_PROM_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+extern char *prom_display_paths[];
+extern unsigned int prom_num_displays;
+
+struct address_range {
+ unsigned int space;
+ unsigned int address;
+ unsigned int size;
+};
+
+struct interrupt_info {
+ int line;
+ int sense; /* +ve/-ve logic, edge or level, etc. */
+};
+
+struct reg_property {
+ unsigned int address;
+ unsigned int size;
+};
+
+struct property {
+ char *name;
+ int length;
+ unsigned char *value;
+ struct property *next;
+};
+
+/*
+ * Note: don't change this structure for now or you'll break BootX !
+ */
+struct device_node {
+ char *name;
+ char *type;
+ phandle node;
+ int n_addrs;
+ struct address_range *addrs;
+ int n_intrs;
+ struct interrupt_info *intrs;
+ char *full_name;
+ struct property *properties;
+ struct device_node *parent;
+ struct device_node *child;
+ struct device_node *sibling;
+ struct device_node *next; /* next device of same type */
+ struct device_node *allnext; /* next in list of all nodes */
+};
+
+struct prom_args;
+typedef void (*prom_entry)(struct prom_args *);
+
+/* OBSOLETE: Old style node lookup */
+extern struct device_node *find_devices(const char *name);
+extern struct device_node *find_type_devices(const char *type);
+extern struct device_node *find_path_device(const char *path);
+extern struct device_node *find_compatible_devices(const char *type,
+ const char *compat);
+extern struct device_node *find_all_nodes(void);
+
+/* New style node lookup */
+extern struct device_node *of_find_node_by_name(struct device_node *from,
+ const char *name);
+extern struct device_node *of_find_node_by_type(struct device_node *from,
+ const char *type);
+extern struct device_node *of_find_compatible_node(struct device_node *from,
+ const char *type, const char *compat);
+extern struct device_node *of_find_node_by_path(const char *path);
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_get_parent(const struct device_node *node);
+extern struct device_node *of_get_next_child(const struct device_node *node,
+ struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* Other Prototypes */
+extern void abort(void);
+extern unsigned long prom_init(int, int, prom_entry);
+extern void prom_print(const char *msg);
+extern void relocate_nodes(void);
+extern void finish_device_tree(void);
+extern int device_is_compatible(struct device_node *device, const char *);
+extern int machine_is_compatible(const char *compat);
+extern unsigned char *get_property(struct device_node *node, const char *name,
+ int *lenp);
+extern void prom_add_property(struct device_node* np, struct property* prop);
+extern void prom_get_irq_senses(unsigned char *, int, int);
+extern int prom_n_addr_cells(struct device_node* np);
+extern int prom_n_size_cells(struct device_node* np);
+
+extern struct resource*
+request_OF_resource(struct device_node* node, int index, const char* name_postfix);
+extern int release_OF_resource(struct device_node* node, int index);
+
+extern void print_properties(struct device_node *node);
+extern int call_rtas(const char *service, int nargs, int nret,
+ unsigned long *outputs, ...);
+
+/*
+ * PCI <-> OF matching functions
+ */
+struct pci_bus;
+struct pci_dev;
+extern int pci_device_from_OF_node(struct device_node *node,
+ u8* bus, u8* devfn);
+extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
+extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
+extern void pci_create_OF_bus_map(void);
+
+/*
+ * When we call back to the Open Firmware client interface, we usually
+ * have to do that before the kernel is relocated to its final location
+ * (this is because we can't use OF after we have overwritten the
+ * exception vectors with our exception handlers). These macros assist
+ * in performing the address calculations that we need to do to access
+ * data when the kernel is running at an address that is different from
+ * the address that the kernel is linked at. The reloc_offset() function
+ * returns the difference between these two addresses and the macros
+ * simplify the process of adding or subtracting this offset to/from
+ * pointer values. See arch/ppc/kernel/prom.c for how these are used.
+ */
+extern unsigned long reloc_offset(void);
+extern unsigned long add_reloc_offset(unsigned long);
+extern unsigned long sub_reloc_offset(unsigned long);
+
+#define PTRRELOC(x) ((typeof(x))add_reloc_offset((unsigned long)(x)))
+#define PTRUNRELOC(x) ((typeof(x))sub_reloc_offset((unsigned long)(x)))
+
+#endif /* _PPC_PROM_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ptrace.h b/include/asm-ppc/ptrace.h
new file mode 100644
index 0000000..9d4e4ea
--- /dev/null
+++ b/include/asm-ppc/ptrace.h
@@ -0,0 +1,145 @@
+#ifndef _PPC_PTRACE_H
+#define _PPC_PTRACE_H
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ *
+ * this should only contain volatile regs
+ * since we can keep non-volatile in the thread_struct
+ * should set this up when only volatiles are saved
+ * by intr code.
+ *
+ * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
+ * that the overall structure is a multiple of 16 bytes in length.
+ *
+ * Note that the offsets of the fields in this struct correspond with
+ * the PT_* values below. This simplifies arch/ppc/kernel/ptrace.c.
+ */
+
+#ifndef __ASSEMBLY__
+struct pt_regs {
+ unsigned long gpr[32];
+ unsigned long nip;
+ unsigned long msr;
+ unsigned long orig_gpr3; /* Used for restarting system calls */
+ unsigned long ctr;
+ unsigned long link;
+ unsigned long xer;
+ unsigned long ccr;
+ unsigned long mq; /* 601 only (not used at present) */
+ /* Used on APUS to hold IPL value. */
+ unsigned long trap; /* Reason for being here */
+ /* N.B. for critical exceptions on 4xx, the dar and dsisr
+ fields are overloaded to hold srr0 and srr1. */
+ unsigned long dar; /* Fault registers */
+ unsigned long dsisr; /* on 4xx/Book-E used for ESR */
+ unsigned long result; /* Result of a system call */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */
+
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE 64
+
+#ifndef __ASSEMBLY__
+#define instruction_pointer(regs) ((regs)->nip)
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
+
+#define force_successful_syscall_return() \
+ do { \
+ current_thread_info()->local_flags |= _TIFL_FORCE_NOERROR; \
+ } while(0)
+
+/*
+ * We use the least-significant bit of the trap field to indicate
+ * whether we have saved the full set of registers, or only a
+ * partial set. A 1 there means the partial set.
+ * On 4xx we use the next bit to indicate whether the exception
+ * is a critical exception (1 means it is).
+ */
+#define FULL_REGS(regs) (((regs)->trap & 1) == 0)
+#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) == 0)
+#define TRAP(regs) ((regs)->trap & ~0xF)
+
+#define CHECK_FULL_REGS(regs) \
+do { \
+ if ((regs)->trap & 1) \
+ printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
+} while (0)
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ * These can't be changed without breaking binary compatibility
+ * with MkLinux, etc.
+ */
+#define PT_R0 0
+#define PT_R1 1
+#define PT_R2 2
+#define PT_R3 3
+#define PT_R4 4
+#define PT_R5 5
+#define PT_R6 6
+#define PT_R7 7
+#define PT_R8 8
+#define PT_R9 9
+#define PT_R10 10
+#define PT_R11 11
+#define PT_R12 12
+#define PT_R13 13
+#define PT_R14 14
+#define PT_R15 15
+#define PT_R16 16
+#define PT_R17 17
+#define PT_R18 18
+#define PT_R19 19
+#define PT_R20 20
+#define PT_R21 21
+#define PT_R22 22
+#define PT_R23 23
+#define PT_R24 24
+#define PT_R25 25
+#define PT_R26 26
+#define PT_R27 27
+#define PT_R28 28
+#define PT_R29 29
+#define PT_R30 30
+#define PT_R31 31
+
+#define PT_NIP 32
+#define PT_MSR 33
+#ifdef __KERNEL__
+#define PT_ORIG_R3 34
+#endif
+#define PT_CTR 35
+#define PT_LNK 36
+#define PT_XER 37
+#define PT_CCR 38
+#define PT_MQ 39
+
+#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */
+#define PT_FPR31 (PT_FPR0 + 2*31)
+#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
+
+/* Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go */
+#define PTRACE_GETVRREGS 18
+#define PTRACE_SETVRREGS 19
+
+/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
+ * spefscr, in one go */
+#define PTRACE_GETEVRREGS 20
+#define PTRACE_SETEVRREGS 21
+
+#endif
diff --git a/include/asm-ppc/raven.h b/include/asm-ppc/raven.h
new file mode 100644
index 0000000..66f52cc
--- /dev/null
+++ b/include/asm-ppc/raven.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-ppc/raven.h -- Raven MPIC chip.
+ *
+ * Copyright (C) 1998 Johnnie Peters
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifdef __KERNEL__
+#ifndef _ASMPPC_RAVEN_H
+#define _ASMPPC_RAVEN_H
+
+#define MVME2600_INT_SIO 0
+#define MVME2600_INT_FALCN_ECC_ERR 1
+#define MVME2600_INT_PCI_ETHERNET 2
+#define MVME2600_INT_PCI_SCSI 3
+#define MVME2600_INT_PCI_GRAPHICS 4
+#define MVME2600_INT_PCI_VME0 5
+#define MVME2600_INT_PCI_VME1 6
+#define MVME2600_INT_PCI_VME2 7
+#define MVME2600_INT_PCI_VME3 8
+#define MVME2600_INT_PCI_INTA 9
+#define MVME2600_INT_PCI_INTB 10
+#define MVME2600_INT_PCI_INTC 11
+#define MVME2600_INT_PCI_INTD 12
+#define MVME2600_INT_LM_SIG0 13
+#define MVME2600_INT_LM_SIG1 14
+
+extern struct hw_interrupt_type raven_pic;
+
+extern int raven_init(void);
+#endif /* _ASMPPC_RAVEN_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/reg.h b/include/asm-ppc/reg.h
new file mode 100644
index 0000000..3372dee
--- /dev/null
+++ b/include/asm-ppc/reg.h
@@ -0,0 +1,444 @@
+/*
+ * Contains the definition of registers common to all PowerPC variants.
+ * If a register definition has been changed in a different PowerPC
+ * variant, we will case it in #ifndef XXX ... #endif, and have the
+ * number used in the Programming Environments Manual For 32-Bit
+ * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_REGS_H__
+#define __ASM_PPC_REGS_H__
+
+#include <linux/stringify.h>
+
+/* Pickup Book E specific registers. */
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include <asm/reg_booke.h>
+#endif
+
+/* Machine State Register (MSR) Fields */
+#define MSR_SF (1<<63)
+#define MSR_ISF (1<<61)
+#define MSR_VEC (1<<25) /* Enable AltiVec */
+#define MSR_POW (1<<18) /* Enable Power Management */
+#define MSR_WE (1<<18) /* Wait State Enable */
+#define MSR_TGPR (1<<17) /* TLB Update registers in use */
+#define MSR_CE (1<<17) /* Critical Interrupt Enable */
+#define MSR_ILE (1<<16) /* Interrupt Little Endian */
+#define MSR_EE (1<<15) /* External Interrupt Enable */
+#define MSR_PR (1<<14) /* Problem State / Privilege Level */
+#define MSR_FP (1<<13) /* Floating Point enable */
+#define MSR_ME (1<<12) /* Machine Check Enable */
+#define MSR_FE0 (1<<11) /* Floating Exception mode 0 */
+#define MSR_SE (1<<10) /* Single Step */
+#define MSR_BE (1<<9) /* Branch Trace */
+#define MSR_DE (1<<9) /* Debug Exception Enable */
+#define MSR_FE1 (1<<8) /* Floating Exception mode 1 */
+#define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */
+#define MSR_IR (1<<5) /* Instruction Relocate */
+#define MSR_DR (1<<4) /* Data Relocate */
+#define MSR_PE (1<<3) /* Protection Enable */
+#define MSR_PX (1<<2) /* Protection Exclusive Mode */
+#define MSR_RI (1<<1) /* Recoverable Exception */
+#define MSR_LE (1<<0) /* Little Endian */
+
+/* Default MSR for kernel mode. */
+#ifdef CONFIG_APUS_FAST_EXCEPT
+#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#ifndef MSR_KERNEL
+#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+#define FPSCR_FX 0x80000000 /* FPU exception summary */
+#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
+#define FPSCR_VX 0x20000000 /* Invalid operation summary */
+#define FPSCR_OX 0x10000000 /* Overflow exception summary */
+#define FPSCR_UX 0x08000000 /* Underflow exception summary */
+#define FPSCR_ZX 0x04000000 /* Zero-devide exception summary */
+#define FPSCR_XX 0x02000000 /* Inexact exception summary */
+#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */
+#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */
+#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */
+#define FPSCR_FR 0x00040000 /* Fraction rounded */
+#define FPSCR_FI 0x00020000 /* Fraction inexact */
+#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */
+#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */
+#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */
+#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */
+#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */
+#define FPSCR_VE 0x00000080 /* Invalid op exception enable */
+#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */
+#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */
+#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */
+#define FPSCR_XE 0x00000008 /* FP inexact exception enable */
+#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
+#define FPSCR_RN 0x00000003 /* FPU rounding control */
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_CTR 0x009 /* Count Register */
+#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
+#define SPRN_DAR 0x013 /* Data Address Register */
+#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */
+#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
+#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
+#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
+#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
+#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */
+
+#define SPRN_DEC 0x016 /* Decrement Register */
+#define SPRN_DER 0x095 /* Debug Enable Regsiter */
+#define DER_RSTE 0x40000000 /* Reset Interrupt */
+#define DER_CHSTPE 0x20000000 /* Check Stop */
+#define DER_MCIE 0x10000000 /* Machine Check Interrupt */
+#define DER_EXTIE 0x02000000 /* External Interrupt */
+#define DER_ALIE 0x01000000 /* Alignment Interrupt */
+#define DER_PRIE 0x00800000 /* Program Interrupt */
+#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */
+#define DER_DECIE 0x00200000 /* Decrementer Interrupt */
+#define DER_SYSIE 0x00040000 /* System Call Interrupt */
+#define DER_TRE 0x00020000 /* Trace Interrupt */
+#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */
+#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */
+#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */
+#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */
+#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */
+#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */
+#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */
+#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */
+#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */
+#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
+#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
+#define SPRN_EAR 0x11A /* External Address Register */
+#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
+#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
+#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
+#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
+#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
+#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
+#define HID0_SBCLK (1<<27)
+#define HID0_EICE (1<<26)
+#define HID0_TBEN (1<<26) /* Timebase enable - 745x */
+#define HID0_ECLK (1<<25)
+#define HID0_PAR (1<<24)
+#define HID0_STEN (1<<24) /* Software table search enable - 745x */
+#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */
+#define HID0_DOZE (1<<23)
+#define HID0_NAP (1<<22)
+#define HID0_SLEEP (1<<21)
+#define HID0_DPM (1<<20)
+#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */
+#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */
+#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/
+#define HID0_ICE (1<<15) /* Instruction Cache Enable */
+#define HID0_DCE (1<<14) /* Data Cache Enable */
+#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
+#define HID0_DLOCK (1<<12) /* Data Cache Lock */
+#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
+#define HID0_DCI (1<<10) /* Data Cache Invalidate */
+#define HID0_SPD (1<<9) /* Speculative disable */
+#define HID0_SGE (1<<7) /* Store Gathering Enable */
+#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
+#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */
+#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
+#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
+#define HID0_ABE (1<<3) /* Address Broadcast Enable */
+#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */
+#define HID0_BHTE (1<<2) /* Branch History Table Enable */
+#define HID0_BTCD (1<<1) /* Branch target cache disable */
+#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */
+#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */
+
+#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
+#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */
+#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */
+#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */
+#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */
+#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */
+#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */
+#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */
+#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */
+#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
+#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
+#define SPRN_HID4 0x3F4 /* 970 HID4 */
+#define SPRN_HID5 0x3F6 /* 970 HID5 */
+#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
+#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
+#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
+#endif
+#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
+#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
+#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
+#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */
+#define ICTRL_EICE 0x08000000 /* enable icache parity errs */
+#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */
+#define ICTRL_EICP 0x00000100 /* enable icache par. check */
+#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
+#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
+#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
+#define SPRN_L2CR2 0x3f8
+#define L2CR_L2E 0x80000000 /* L2 enable */
+#define L2CR_L2PE 0x40000000 /* L2 parity enable */
+#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */
+#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */
+#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */
+#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */
+#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */
+#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */
+#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */
+#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */
+#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */
+#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */
+#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */
+#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */
+#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */
+#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */
+#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */
+#define L2CR_L2DO 0x00400000 /* L2 data only */
+#define L2CR_L2I 0x00200000 /* L2 global invalidate */
+#define L2CR_L2CTL 0x00100000 /* L2 RAM control */
+#define L2CR_L2WT 0x00080000 /* L2 write-through */
+#define L2CR_L2TS 0x00040000 /* L2 test support */
+#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */
+#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */
+#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */
+#define L2CR_L2SL 0x00008000 /* L2 DLL slow */
+#define L2CR_L2DF 0x00004000 /* L2 differential clock */
+#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */
+#define L2CR_L2IP 0x00000001 /* L2 GI in progress */
+#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */
+#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */
+#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */
+#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */
+#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */
+#define L3CR_L3E 0x80000000 /* L3 enable */
+#define L3CR_L3PE 0x40000000 /* L3 data parity enable */
+#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */
+#define L3CR_L3SIZ 0x10000000 /* L3 size */
+#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */
+#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */
+#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */
+#define L3CR_L3IO 0x00400000 /* L3 instruction only */
+#define L3CR_L3SPO 0x00040000 /* L3 sample point override */
+#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */
+#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */
+#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */
+#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */
+#define L3CR_L3I 0x00000400 /* L3 global invalidate */
+#define L3CR_L3RT 0x00000300 /* L3 SRAM type */
+#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */
+#define L3CR_L3DO 0x00000040 /* L3 data only mode */
+#define L3CR_PMEN 0x00000004 /* L3 private memory enable */
+#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */
+#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */
+#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */
+#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */
+#define SPRN_LDSTDB 0x3f4 /* */
+#define SPRN_LR 0x008 /* Link Register */
+#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
+#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
+#ifndef SPRN_PIR
+#define SPRN_PIR 0x3FF /* Processor Identification Register */
+#endif
+#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
+#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
+#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
+#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
+#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */
+#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */
+#define SPRN_PVR 0x11F /* Processor Version Register */
+#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
+#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
+#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
+#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
+#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
+#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
+#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
+#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
+#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
+#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
+#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
+#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
+#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
+#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
+#ifndef SPRN_SVR
+#define SPRN_SVR 0x11E /* System Version Register */
+#endif
+#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
+/* these bits were defined in inverted endian sense originally, ugh, confusing */
+#define THRM1_TIN (1 << 31)
+#define THRM1_TIV (1 << 30)
+#define THRM1_THRES(x) ((x&0x7f)<<23)
+#define THRM3_SITV(x) ((x&0x3fff)<<1)
+#define THRM1_TID (1<<2)
+#define THRM1_TIE (1<<1)
+#define THRM1_V (1<<0)
+#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
+#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
+#define THRM3_E (1<<0)
+#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
+#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
+#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
+#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
+#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
+#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
+#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */
+#define SPRN_XER 0x001 /* Fixed Point Exception Register */
+
+/* Bit definitions for MMCR0 and PMC1 / PMC2. */
+#define MMCR0_PMC1_CYCLES (1 << 7)
+#define MMCR0_PMC1_ICACHEMISS (5 << 7)
+#define MMCR0_PMC1_DTLB (6 << 7)
+#define MMCR0_PMC2_DCACHEMISS 0x6
+#define MMCR0_PMC2_CYCLES 0x1
+#define MMCR0_PMC2_ITLB 0x7
+#define MMCR0_PMC2_LOADMISSTIME 0x5
+#define MMCR0_PMXE (1 << 26)
+
+/* Processor Version Register */
+
+/* Processor Version Register (PVR) field extraction */
+
+#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
+#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
+
+/*
+ * IBM has further subdivided the standard PowerPC 16-bit version and
+ * revision subfields of the PVR for the PowerPC 403s into the following:
+ */
+
+#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
+#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
+#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
+#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
+#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
+#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
+
+/* Processor Version Numbers */
+
+#define PVR_403GA 0x00200000
+#define PVR_403GB 0x00200100
+#define PVR_403GC 0x00200200
+#define PVR_403GCX 0x00201400
+#define PVR_405GP 0x40110000
+#define PVR_STB03XXX 0x40310000
+#define PVR_NP405H 0x41410000
+#define PVR_NP405L 0x41610000
+#define PVR_440GP_RB 0x40120440
+#define PVR_440GP_RC1 0x40120481
+#define PVR_440GP_RC2 0x40200481
+#define PVR_440GX_RA 0x51b21850
+#define PVR_440GX_RB 0x51b21851
+#define PVR_440GX_RC 0x51b21892
+#define PVR_601 0x00010000
+#define PVR_602 0x00050000
+#define PVR_603 0x00030000
+#define PVR_603e 0x00060000
+#define PVR_603ev 0x00070000
+#define PVR_603r 0x00071000
+#define PVR_604 0x00040000
+#define PVR_604e 0x00090000
+#define PVR_604r 0x000A0000
+#define PVR_620 0x00140000
+#define PVR_740 0x00080000
+#define PVR_750 PVR_740
+#define PVR_740P 0x10080000
+#define PVR_750P PVR_740P
+#define PVR_7400 0x000C0000
+#define PVR_7410 0x800C0000
+#define PVR_7450 0x80000000
+#define PVR_8540 0x80200000
+#define PVR_8560 0x80200000
+/*
+ * For the 8xx processors, all of them report the same PVR family for
+ * the PowerPC core. The various versions of these processors must be
+ * differentiated by the version number in the Communication Processor
+ * Module (CPM).
+ */
+#define PVR_821 0x00500000
+#define PVR_823 PVR_821
+#define PVR_850 PVR_821
+#define PVR_860 PVR_821
+#define PVR_8240 0x00810100
+#define PVR_8245 0x80811014
+#define PVR_8260 PVR_8240
+
+#if 0
+/* Segment Registers */
+#define SR0 0
+#define SR1 1
+#define SR2 2
+#define SR3 3
+#define SR4 4
+#define SR5 5
+#define SR6 6
+#define SR7 7
+#define SR8 8
+#define SR9 9
+#define SR10 10
+#define SR11 11
+#define SR12 12
+#define SR13 13
+#define SR14 14
+#define SR15 15
+#endif
+
+/* Macros for setting and retrieving special purpose registers */
+#ifndef __ASSEMBLY__
+#define mfmsr() ({unsigned int rval; \
+ asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v))
+
+#define mfspr(rn) ({unsigned int rval; \
+ asm volatile("mfspr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
+#define mfsrin(v) ({unsigned int rval; \
+ asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
+ rval;})
+
+#define proc_trap() asm volatile("trap")
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_PPC_REGS_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h
new file mode 100644
index 0000000..4b03f8e
--- /dev/null
+++ b/include/asm-ppc/reg_booke.h
@@ -0,0 +1,484 @@
+/*
+ * Contains register definitions common to the Book E PowerPC
+ * specification. Notice that while the IBM-40x series of CPUs
+ * are not true Book E PowerPCs, they borrowed a number of features
+ * before Book E was finalized, and are included here as well. Unfortunatly,
+ * they sometimes used different locations than true Book E CPUs did.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_REG_BOOKE_H__
+#define __ASM_PPC_REG_BOOKE_H__
+
+#ifndef __ASSEMBLY__
+/* Device Control Registers */
+void __mtdcr(int reg, unsigned int val);
+unsigned int __mfdcr(int reg);
+#define mfdcr(rn) \
+ ({unsigned int rval; \
+ if (__builtin_constant_p(rn)) \
+ asm volatile("mfdcr %0," __stringify(rn) \
+ : "=r" (rval)); \
+ else \
+ rval = __mfdcr(rn); \
+ rval;})
+
+#define mtdcr(rn, v) \
+do { \
+ if (__builtin_constant_p(rn)) \
+ asm volatile("mtdcr " __stringify(rn) ",%0" \
+ : : "r" (v)); \
+ else \
+ __mtdcr(rn, v); \
+} while (0)
+
+/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
+#define mfdcri(base, reg) \
+({ \
+ mtdcr(base ## _CFGADDR, base ## _ ## reg); \
+ mfdcr(base ## _CFGDATA); \
+})
+
+#define mtdcri(base, reg, data) \
+do { \
+ mtdcr(base ## _CFGADDR, base ## _ ## reg); \
+ mtdcr(base ## _CFGDATA, data); \
+} while (0)
+
+/* Performance Monitor Registers */
+#define mfpmr(rn) ({unsigned int rval; \
+ asm volatile("mfpmr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
+#endif /* __ASSEMBLY__ */
+
+/* Freescale Book E Performance Monitor APU Registers */
+#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
+#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
+#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
+#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
+#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
+#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
+#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
+#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
+
+#define PMLCA_FC 0x80000000 /* Freeze Counter */
+#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
+#define PMLCA_FCU 0x20000000 /* Freeze in User */
+#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
+#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
+#define PMLCA_CE 0x04000000 /* Condition Enable */
+
+#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
+#define PMLCA_EVENT_SHIFT 16
+
+#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
+#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
+#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
+#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
+
+#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_SHIFT 8
+
+#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
+#define PMLCB_THRESHOLD_SHIFT 0
+
+#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
+
+#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
+#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
+#define PMGC0_FCECE 0x20000000 /* Freeze countes on
+ Enabled Condition or
+ Event */
+
+#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
+#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
+#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
+#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
+#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
+#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
+#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
+#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
+#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
+#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
+
+
+/* Machine State Register (MSR) Fields */
+#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
+#define MSR_SPE (1<<25) /* Enable SPE */
+#define MSR_DWE (1<<10) /* Debug Wait Enable */
+#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */
+#define MSR_IS MSR_IR /* Instruction Space */
+#define MSR_DS MSR_DR /* Data Space */
+#define MSR_PMM (1<<2) /* Performance monitor mark bit */
+
+/* Default MSR for kernel mode. */
+#if defined (CONFIG_40x)
+#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
+#elif defined(CONFIG_BOOKE)
+#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE)
+#endif
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
+#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
+#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
+#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
+#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
+#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
+#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
+#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
+#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
+#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
+#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
+#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
+#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
+#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
+#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */
+#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
+#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
+#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */
+#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */
+#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */
+#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */
+#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */
+#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */
+#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */
+#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */
+#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */
+#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */
+#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */
+#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */
+#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */
+#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */
+#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */
+#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
+#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
+#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
+#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */
+#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */
+#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */
+#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
+#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */
+#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */
+#define SPRN_MCSR 0x23C /* Machine Check Status Register */
+#define SPRN_MCAR 0x23D /* Machine Check Address Register */
+#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
+#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
+#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
+#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */
+#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
+#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
+#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
+#define SPRN_PID1 0x279 /* Process ID Register 1 */
+#define SPRN_PID2 0x27A /* Process ID Register 2 */
+#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */
+#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */
+#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */
+#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */
+#define SPRN_MMUCR 0x3B2 /* MMU Control Register */
+#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
+#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
+#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
+#define SPRN_SLER 0x3BB /* Little-endian real mode */
+#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */
+#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
+#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
+#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
+#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */
+#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
+#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
+#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
+#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
+#define SPRN_SVR 0x3FF /* System Version Register */
+
+/*
+ * SPRs which have conflicting definitions on true Book E versus classic,
+ * or IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define SPRN_PID 0x030 /* Process ID */
+#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
+#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */
+#define SPRN_DEAR 0x03D /* Data Error Address Register */
+#define SPRN_ESR 0x03E /* Exception Syndrome Register */
+#define SPRN_PIR 0x11E /* Processor Identification Register */
+#define SPRN_DBSR 0x130 /* Debug Status Register */
+#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */
+#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */
+#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */
+#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */
+#define SPRN_DAC1 0x13C /* Data Address Compare 1 */
+#define SPRN_DAC2 0x13D /* Data Address Compare 2 */
+#define SPRN_TSR 0x150 /* Timer Status Register */
+#define SPRN_TCR 0x154 /* Timer Control Register */
+#endif /* Book E */
+#ifdef CONFIG_40x
+#define SPRN_PID 0x3B1 /* Process ID */
+#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
+#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
+#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
+#define SPRN_TSR 0x3D8 /* Timer Status Register */
+#define SPRN_TCR 0x3DA /* Timer Control Register */
+#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
+#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
+#define SPRN_DBSR 0x3F0 /* Debug Status Register */
+#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
+#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
+#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
+#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */
+#endif
+
+/* Bit definitions for CCR1. */
+#define CCR1_TCS 0x00000080 /* Timer Clock Select */
+
+/* Bit definitions for the MCSR. */
+#ifdef CONFIG_440A
+#define MCSR_MCS 0x80000000 /* Machine Check Summary */
+#define MCSR_IB 0x40000000 /* Instruction PLB Error */
+#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
+#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
+#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
+#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
+#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
+#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
+#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
+#endif
+#ifdef CONFIG_E500
+#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
+#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
+#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */
+#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */
+#define MCSR_GL_CI 0x00010000UL /* Guarded Load or Cache-Inhibited stwcx. */
+#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */
+#define MCSR_BUS_RAERR 0x00000040UL /* Read Address Error */
+#define MCSR_BUS_WAERR 0x00000020UL /* Write Address Error */
+#define MCSR_BUS_IBERR 0x00000010UL /* Instruction Data Error */
+#define MCSR_BUS_RBERR 0x00000008UL /* Read Data Bus Error */
+#define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */
+#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */
+#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */
+#endif
+
+/* Bit definitions for the DBSR. */
+/*
+ * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define DBSR_IC 0x08000000 /* Instruction Completion */
+#define DBSR_BT 0x04000000 /* Branch Taken */
+#define DBSR_TIE 0x01000000 /* Trap Instruction Event */
+#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */
+#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */
+#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */
+#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */
+#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */
+#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */
+#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */
+#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */
+#endif
+#ifdef CONFIG_40x
+#define DBSR_IC 0x80000000 /* Instruction Completion */
+#define DBSR_BT 0x40000000 /* Branch taken */
+#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */
+#define DBSR_IAC1 0x00800000 /* Instruction Address Compare 1 Event */
+#define DBSR_IAC2 0x00400000 /* Instruction Address Compare 2 Event */
+#define DBSR_IAC3 0x00200000 /* Instruction Address Compare 3 Event */
+#define DBSR_IAC4 0x00100000 /* Instruction Address Compare 4 Event */
+#define DBSR_DAC1R 0x00080000 /* Data Address Compare 1 Read Event */
+#define DBSR_DAC1W 0x00040000 /* Data Address Compare 1 Write Event */
+#define DBSR_DAC2R 0x00020000 /* Data Address Compare 2 Read Event */
+#define DBSR_DAC2W 0x00010000 /* Data Address Compare 2 Write Event */
+#endif
+
+/* Bit definitions related to the ESR. */
+#define ESR_MCI 0x80000000 /* Machine Check - Instruction */
+#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
+#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
+#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
+#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
+#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
+#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
+#define ESR_PTR 0x02000000 /* Program Exception - Trap */
+#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
+#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
+#define ESR_ST 0x00800000 /* Store Operation */
+#define ESR_DLK 0x00200000 /* Data Cache Locking */
+#define ESR_ILK 0x00100000 /* Instr. Cache Locking */
+#define ESR_BO 0x00020000 /* Byte Ordering */
+
+/* Bit definitions related to the DBCR0. */
+#define DBCR0_EDM 0x80000000 /* External Debug Mode */
+#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
+#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
+#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */
+#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */
+#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
+#define DBCR0_RST_NONE 0x00000000 /* No Reset */
+#define DBCR0_IC 0x08000000 /* Instruction Completion */
+#define DBCR0_BT 0x04000000 /* Branch Taken */
+#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
+#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
+#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */
+#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */
+#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */
+#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */
+#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */
+#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */
+#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */
+#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */
+#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
+#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
+#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
+
+/* Bit definitions related to the TCR. */
+#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
+#define TCR_WP_MASK TCR_WP(3)
+#define WP_2_17 0 /* 2^17 clocks */
+#define WP_2_21 1 /* 2^21 clocks */
+#define WP_2_25 2 /* 2^25 clocks */
+#define WP_2_29 3 /* 2^29 clocks */
+#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
+#define TCR_WRC_MASK TCR_WRC(3)
+#define WRC_NONE 0 /* No reset will occur */
+#define WRC_CORE 1 /* Core reset will occur */
+#define WRC_CHIP 2 /* Chip reset will occur */
+#define WRC_SYSTEM 3 /* System reset will occur */
+#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
+#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
+#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */
+#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
+#define TCR_FP_MASK TCR_FP(3)
+#define FP_2_9 0 /* 2^9 clocks */
+#define FP_2_13 1 /* 2^13 clocks */
+#define FP_2_17 2 /* 2^17 clocks */
+#define FP_2_21 3 /* 2^21 clocks */
+#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
+#define TCR_ARE 0x00400000 /* Auto Reload Enable */
+
+/* Bit definitions for the TSR. */
+#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
+#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
+#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
+#define WRS_NONE 0 /* No WDT reset occurred */
+#define WRS_CORE 1 /* WDT forced core reset */
+#define WRS_CHIP 2 /* WDT forced chip reset */
+#define WRS_SYSTEM 3 /* WDT forced system reset */
+#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
+#define TSR_DIS TSR_PIS /* DEC Interrupt Status */
+#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
+
+/* Bit definitions for the DCCR. */
+#define DCCR_NOCACHE 0 /* Noncacheable */
+#define DCCR_CACHE 1 /* Cacheable */
+
+/* Bit definitions for DCWR. */
+#define DCWR_COPY 0 /* Copy-back */
+#define DCWR_WRITE 1 /* Write-through */
+
+/* Bit definitions for ICCR. */
+#define ICCR_NOCACHE 0 /* Noncacheable */
+#define ICCR_CACHE 1 /* Cacheable */
+
+/* Bit definitions for L1CSR0. */
+#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
+#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
+
+/* Bit definitions for L1CSR0. */
+#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */
+#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */
+#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */
+
+/* Bit definitions for SGR. */
+#define SGR_NORMAL 0 /* Speculative fetching allowed. */
+#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
+
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */
+#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */
+#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */
+#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */
+#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */
+#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */
+#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */
+#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */
+#define SPEFSCR_OV 0x00004000 /* Integer overflow */
+#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */
+#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */
+#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */
+#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */
+#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */
+#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */
+#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */
+
+/*
+ * The IBM-403 is an even more odd special case, as it is much
+ * older than the IBM-405 series. We put these down here incase someone
+ * wishes to support these machines again.
+ */
+#ifdef CONFIG_403GCX
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
+#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
+#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
+#define SPRN_TBHI 0x3DC /* Time Base High */
+#define SPRN_TBLO 0x3DD /* Time Base Low */
+#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
+#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
+#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
+#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
+#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
+
+
+/* Bit definitions for the DBCR. */
+#define DBCR_EDM DBCR0_EDM
+#define DBCR_IDM DBCR0_IDM
+#define DBCR_RST(x) (((x) & 0x3) << 28)
+#define DBCR_RST_NONE 0
+#define DBCR_RST_CORE 1
+#define DBCR_RST_CHIP 2
+#define DBCR_RST_SYSTEM 3
+#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */
+#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */
+#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */
+#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */
+#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
+#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
+#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
+#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
+#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
+#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
+#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
+#define DAC_BYTE 0
+#define DAC_HALF 1
+#define DAC_WORD 2
+#define DAC_QUAD 3
+#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
+#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
+#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
+#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
+#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
+#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
+#define DBCR_SIA 0x00000008 /* Second IAC Enable */
+#define DBCR_SDA 0x00000004 /* Second DAC Enable */
+#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
+#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
+#endif /* 403GCX */
+#endif /* __ASM_PPC_REG_BOOKE_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/residual.h b/include/asm-ppc/residual.h
new file mode 100644
index 0000000..934810d
--- /dev/null
+++ b/include/asm-ppc/residual.h
@@ -0,0 +1,350 @@
+/* 7/18/95 */
+/*----------------------------------------------------------------------------*/
+/* Residual Data header definitions and prototypes */
+/*----------------------------------------------------------------------------*/
+
+/* Structure map for RESIDUAL on PowerPC Reference Platform */
+/* residual.h - Residual data structure passed in r3. */
+/* Load point passed in r4 to boot image. */
+/* For enum's: if given in hex then they are bit significant, */
+/* i.e. only one bit is on for each enum */
+/* Reserved fields must be filled with zeros. */
+
+#ifdef __KERNEL__
+#ifndef _RESIDUAL_
+#define _RESIDUAL_
+
+#ifndef __ASSEMBLY__
+
+#define MAX_CPUS 32 /* These should be set to the maximum */
+#define MAX_MEMS 64 /* number possible for this system. */
+#define MAX_DEVICES 256 /* Changing these will change the */
+#define AVE_PNP_SIZE 32 /* structure, hence the version of */
+#define MAX_MEM_SEGS 64 /* this header file. */
+
+/*----------------------------------------------------------------------------*/
+/* Public structures... */
+/*----------------------------------------------------------------------------*/
+
+#include <asm/pnp.h>
+
+typedef enum _L1CACHE_TYPE {
+ NoneCAC = 0,
+ SplitCAC = 1,
+ CombinedCAC = 2
+ } L1CACHE_TYPE;
+
+typedef enum _TLB_TYPE {
+ NoneTLB = 0,
+ SplitTLB = 1,
+ CombinedTLB = 2
+ } TLB_TYPE;
+
+typedef enum _FIRMWARE_SUPPORT {
+ Conventional = 0x01,
+ OpenFirmware = 0x02,
+ Diagnostics = 0x04,
+ LowDebug = 0x08,
+ Multiboot = 0x10,
+ LowClient = 0x20,
+ Hex41 = 0x40,
+ FAT = 0x80,
+ ISO9660 = 0x0100,
+ SCSI_InitiatorID_Override = 0x0200,
+ Tape_Boot = 0x0400,
+ FW_Boot_Path = 0x0800
+ } FIRMWARE_SUPPORT;
+
+typedef enum _FIRMWARE_SUPPLIERS {
+ IBMFirmware = 0x00,
+ MotoFirmware = 0x01, /* 7/18/95 */
+ FirmWorks = 0x02, /* 10/5/95 */
+ Bull = 0x03, /* 04/03/96 */
+ } FIRMWARE_SUPPLIERS;
+
+typedef enum _ENDIAN_SWITCH_METHODS {
+ UsePort92 = 0x01,
+ UsePCIConfigA8 = 0x02,
+ UseFF001030 = 0x03,
+ } ENDIAN_SWITCH_METHODS;
+
+typedef enum _SPREAD_IO_METHODS {
+ UsePort850 = 0x00,
+/*UsePCIConfigA8 = 0x02,*/
+ } SPREAD_IO_METHODS;
+
+typedef struct _VPD {
+
+ /* Box dependent stuff */
+ unsigned char PrintableModel[32]; /* Null terminated string.
+ Must be of the form:
+ vvv,<20h>,<model designation>,<0x0>
+ where vvv is the vendor ID
+ e.g. IBM PPS MODEL 6015<0x0> */
+ unsigned char Serial[16]; /* 12/94:
+ Serial Number; must be of the form:
+ vvv<serial number> where vvv is the
+ vendor ID.
+ e.g. IBM60151234567<20h><20h> */
+ unsigned char Reserved[48];
+ unsigned long FirmwareSupplier; /* See FirmwareSuppliers enum */
+ unsigned long FirmwareSupports; /* See FirmwareSupport enum */
+ unsigned long NvramSize; /* Size of nvram in bytes */
+ unsigned long NumSIMMSlots;
+ unsigned short EndianSwitchMethod; /* See EndianSwitchMethods enum */
+ unsigned short SpreadIOMethod; /* See SpreadIOMethods enum */
+ unsigned long SmpIar;
+ unsigned long RAMErrLogOffset; /* Heap offset to error log */
+ unsigned long Reserved5;
+ unsigned long Reserved6;
+ unsigned long ProcessorHz; /* Processor clock frequency in Hertz */
+ unsigned long ProcessorBusHz; /* Processor bus clock frequency */
+ unsigned long Reserved7;
+ unsigned long TimeBaseDivisor; /* (Bus clocks per timebase tic)*1000 */
+ unsigned long WordWidth; /* Word width in bits */
+ unsigned long PageSize; /* Page size in bytes */
+ unsigned long CoherenceBlockSize; /* Unit of transfer in/out of cache
+ for which coherency is maintained;
+ normally <= CacheLineSize. */
+ unsigned long GranuleSize; /* Unit of lock allocation to avoid */
+ /* false sharing of locks. */
+
+ /* L1 Cache variables */
+ unsigned long CacheSize; /* L1 Cache size in KB. This is the */
+ /* total size of the L1, whether */
+ /* combined or split */
+ unsigned long CacheAttrib; /* L1CACHE_TYPE */
+ unsigned long CacheAssoc; /* L1 Cache associativity. Use this
+ for combined cache. If split, put
+ zeros here. */
+ unsigned long CacheLineSize; /* L1 Cache line size in bytes. Use
+ for combined cache. If split, put
+ zeros here. */
+ /* For split L1 Cache: (= combined if combined cache) */
+ unsigned long I_CacheSize;
+ unsigned long I_CacheAssoc;
+ unsigned long I_CacheLineSize;
+ unsigned long D_CacheSize;
+ unsigned long D_CacheAssoc;
+ unsigned long D_CacheLineSize;
+
+ /* Translation Lookaside Buffer variables */
+ unsigned long TLBSize; /* Total number of TLBs on the system */
+ unsigned long TLBAttrib; /* Combined I+D or split TLB */
+ unsigned long TLBAssoc; /* TLB Associativity. Use this for
+ combined TLB. If split, put zeros
+ here. */
+ /* For split TLB: (= combined if combined TLB) */
+ unsigned long I_TLBSize;
+ unsigned long I_TLBAssoc;
+ unsigned long D_TLBSize;
+ unsigned long D_TLBAssoc;
+
+ unsigned long ExtendedVPD; /* Offset to extended VPD area;
+ null if unused */
+ } VPD;
+
+typedef enum _DEVICE_FLAGS {
+ Enabled = 0x4000, /* 1 - PCI device is enabled */
+ Integrated = 0x2000,
+ Failed = 0x1000, /* 1 - device failed POST code tests */
+ Static = 0x0800, /* 0 - dynamically configurable
+ 1 - static */
+ Dock = 0x0400, /* 0 - not a docking station device
+ 1 - is a docking station device */
+ Boot = 0x0200, /* 0 - device cannot be used for BOOT
+ 1 - can be a BOOT device */
+ Configurable = 0x0100, /* 1 - device is configurable */
+ Disableable = 0x80, /* 1 - device can be disabled */
+ PowerManaged = 0x40, /* 0 - not managed; 1 - managed */
+ ReadOnly = 0x20, /* 1 - device is read only */
+ Removable = 0x10, /* 1 - device is removable */
+ ConsoleIn = 0x08,
+ ConsoleOut = 0x04,
+ Input = 0x02,
+ Output = 0x01
+ } DEVICE_FLAGS;
+
+typedef enum _BUS_ID {
+ ISADEVICE = 0x01,
+ EISADEVICE = 0x02,
+ PCIDEVICE = 0x04,
+ PCMCIADEVICE = 0x08,
+ PNPISADEVICE = 0x10,
+ MCADEVICE = 0x20,
+ MXDEVICE = 0x40, /* Devices on mezzanine bus */
+ PROCESSORDEVICE = 0x80, /* Devices on processor bus */
+ VMEDEVICE = 0x100,
+ } BUS_ID;
+
+typedef struct _DEVICE_ID {
+ unsigned long BusId; /* See BUS_ID enum above */
+ unsigned long DevId; /* Big Endian format */
+ unsigned long SerialNum; /* For multiple usage of a single
+ DevId */
+ unsigned long Flags; /* See DEVICE_FLAGS enum above */
+ unsigned char BaseType; /* See pnp.h for bit definitions */
+ unsigned char SubType; /* See pnp.h for bit definitions */
+ unsigned char Interface; /* See pnp.h for bit definitions */
+ unsigned char Spare;
+ } DEVICE_ID;
+
+typedef union _BUS_ACCESS {
+ struct _PnPAccess{
+ unsigned char CSN;
+ unsigned char LogicalDevNumber;
+ unsigned short ReadDataPort;
+ } PnPAccess;
+ struct _ISAAccess{
+ unsigned char SlotNumber; /* ISA Slot Number generally not
+ available; 0 if unknown */
+ unsigned char LogicalDevNumber;
+ unsigned short ISAReserved;
+ } ISAAccess;
+ struct _MCAAccess{
+ unsigned char SlotNumber;
+ unsigned char LogicalDevNumber;
+ unsigned short MCAReserved;
+ } MCAAccess;
+ struct _PCMCIAAccess{
+ unsigned char SlotNumber;
+ unsigned char LogicalDevNumber;
+ unsigned short PCMCIAReserved;
+ } PCMCIAAccess;
+ struct _EISAAccess{
+ unsigned char SlotNumber;
+ unsigned char FunctionNumber;
+ unsigned short EISAReserved;
+ } EISAAccess;
+ struct _PCIAccess{
+ unsigned char BusNumber;
+ unsigned char DevFuncNumber;
+ unsigned short PCIReserved;
+ } PCIAccess;
+ struct _ProcBusAccess{
+ unsigned char BusNumber;
+ unsigned char BUID;
+ unsigned short ProcBusReserved;
+ } ProcBusAccess;
+ } BUS_ACCESS;
+
+/* Per logical device information */
+typedef struct _PPC_DEVICE {
+ DEVICE_ID DeviceId;
+ BUS_ACCESS BusAccess;
+
+ /* The following three are offsets into the DevicePnPHeap */
+ /* All are in PnP compressed format */
+ unsigned long AllocatedOffset; /* Allocated resource description */
+ unsigned long PossibleOffset; /* Possible resource description */
+ unsigned long CompatibleOffset; /* Compatible device identifiers */
+ } PPC_DEVICE;
+
+typedef enum _CPU_STATE {
+ CPU_GOOD = 0, /* CPU is present, and active */
+ CPU_GOOD_FW = 1, /* CPU is present, and in firmware */
+ CPU_OFF = 2, /* CPU is present, but inactive */
+ CPU_FAILED = 3, /* CPU is present, but failed POST */
+ CPU_NOT_PRESENT = 255 /* CPU not present */
+ } CPU_STATE;
+
+typedef struct _PPC_CPU {
+ unsigned long CpuType; /* Result of mfspr from Processor
+ Version Register (PVR).
+ PVR(0-15) = Version (e.g. 601)
+ PVR(16-31 = EC Level */
+ unsigned char CpuNumber; /* CPU Number for this processor */
+ unsigned char CpuState; /* CPU State, see CPU_STATE enum */
+ unsigned short Reserved;
+ } PPC_CPU;
+
+typedef struct _PPC_MEM {
+ unsigned long SIMMSize; /* 0 - absent or bad
+ 8M, 32M (in MB) */
+ } PPC_MEM;
+
+typedef enum _MEM_USAGE {
+ Other = 0x8000,
+ ResumeBlock = 0x4000, /* for use by power management */
+ SystemROM = 0x2000, /* Flash memory (populated) */
+ UnPopSystemROM = 0x1000, /* Unpopulated part of SystemROM area */
+ IOMemory = 0x0800,
+ SystemIO = 0x0400,
+ SystemRegs = 0x0200,
+ PCIAddr = 0x0100,
+ PCIConfig = 0x80,
+ ISAAddr = 0x40,
+ Unpopulated = 0x20, /* Unpopulated part of System Memory */
+ Free = 0x10, /* Free part of System Memory */
+ BootImage = 0x08, /* BootImage part of System Memory */
+ FirmwareCode = 0x04, /* FirmwareCode part of System Memory */
+ FirmwareHeap = 0x02, /* FirmwareHeap part of System Memory */
+ FirmwareStack = 0x01 /* FirmwareStack part of System Memory*/
+ } MEM_USAGE;
+
+typedef struct _MEM_MAP {
+ unsigned long Usage; /* See MEM_USAGE above */
+ unsigned long BasePage; /* Page number measured in 4KB pages */
+ unsigned long PageCount; /* Page count measured in 4KB pages */
+ } MEM_MAP;
+
+typedef struct _RESIDUAL {
+ unsigned long ResidualLength; /* Length of Residual */
+ unsigned char Version; /* of this data structure */
+ unsigned char Revision; /* of this data structure */
+ unsigned short EC; /* of this data structure */
+ /* VPD */
+ VPD VitalProductData;
+ /* CPU */
+ unsigned short MaxNumCpus; /* Max CPUs in this system */
+ unsigned short ActualNumCpus; /* ActualNumCpus < MaxNumCpus means */
+ /* that there are unpopulated or */
+ /* otherwise unusable cpu locations */
+ PPC_CPU Cpus[MAX_CPUS];
+ /* Memory */
+ unsigned long TotalMemory; /* Total amount of memory installed */
+ unsigned long GoodMemory; /* Total amount of good memory */
+ unsigned long ActualNumMemSegs;
+ MEM_MAP Segs[MAX_MEM_SEGS];
+ unsigned long ActualNumMemories;
+ PPC_MEM Memories[MAX_MEMS];
+ /* Devices */
+ unsigned long ActualNumDevices;
+ PPC_DEVICE Devices[MAX_DEVICES];
+ unsigned char DevicePnPHeap[2*MAX_DEVICES*AVE_PNP_SIZE];
+ } RESIDUAL;
+
+
+/*
+ * Forward declaration - we can't include <linux/pci.h> because it
+ * breaks the boot loader
+ */
+struct pci_dev;
+
+extern RESIDUAL *res;
+extern void print_residual_device_info(void);
+extern PPC_DEVICE *residual_find_device(unsigned long BusMask,
+ unsigned char * DevID, int BaseType,
+ int SubType, int Interface, int n);
+extern int residual_pcidev_irq(struct pci_dev *dev);
+extern void residual_irq_mask(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
+extern unsigned int residual_isapic_addr(void);
+extern PnP_TAG_PACKET *PnP_find_packet(unsigned char *p, unsigned packet_tag,
+ int n);
+extern PnP_TAG_PACKET *PnP_find_small_vendor_packet(unsigned char *p,
+ unsigned packet_type,
+ int n);
+extern PnP_TAG_PACKET *PnP_find_large_vendor_packet(unsigned char *p,
+ unsigned packet_type,
+ int n);
+
+#ifdef CONFIG_PREP_RESIDUAL
+#define have_residual_data (res && res->ResidualLength)
+#else
+#define have_residual_data 0
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* ndef _RESIDUAL_ */
+
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/resource.h b/include/asm-ppc/resource.h
new file mode 100644
index 0000000..86a1ea2
--- /dev/null
+++ b/include/asm-ppc/resource.h
@@ -0,0 +1,6 @@
+#ifndef _PPC_RESOURCE_H
+#define _PPC_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/include/asm-ppc/rheap.h b/include/asm-ppc/rheap.h
new file mode 100644
index 0000000..e6ca1f6
--- /dev/null
+++ b/include/asm-ppc/rheap.h
@@ -0,0 +1,85 @@
+/*
+ * include/asm-ppc/rheap.c
+ *
+ * Header file for the implementation of a remote heap.
+ *
+ * Author: Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_PPC_RHEAP_H__
+#define __ASM_PPC_RHEAP_H__
+
+#include <linux/list.h>
+
+typedef struct _rh_block {
+ struct list_head list;
+ void *start;
+ int size;
+ const char *owner;
+} rh_block_t;
+
+typedef struct _rh_info {
+ unsigned int alignment;
+ int max_blocks;
+ int empty_slots;
+ rh_block_t *block;
+ struct list_head empty_list;
+ struct list_head free_list;
+ struct list_head taken_list;
+ unsigned int flags;
+} rh_info_t;
+
+#define RHIF_STATIC_INFO 0x1
+#define RHIF_STATIC_BLOCK 0x2
+
+typedef struct rh_stats_t {
+ void *start;
+ int size;
+ const char *owner;
+} rh_stats_t;
+
+#define RHGS_FREE 0
+#define RHGS_TAKEN 1
+
+/* Create a remote heap dynamically */
+extern rh_info_t *rh_create(unsigned int alignment);
+
+/* Destroy a remote heap, created by rh_create() */
+extern void rh_destroy(rh_info_t * info);
+
+/* Initialize in place a remote info block */
+extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
+ rh_block_t * block);
+
+/* Attach a free region to manage */
+extern int rh_attach_region(rh_info_t * info, void *start, int size);
+
+/* Detach a free region */
+extern void *rh_detach_region(rh_info_t * info, void *start, int size);
+
+/* Allocate the given size from the remote heap */
+extern void *rh_alloc(rh_info_t * info, int size, const char *owner);
+
+/* Allocate the given size from the given address */
+extern void *rh_alloc_fixed(rh_info_t * info, void *start, int size,
+ const char *owner);
+
+/* Free the allocated area */
+extern int rh_free(rh_info_t * info, void *start);
+
+/* Get stats for debugging purposes */
+extern int rh_get_stats(rh_info_t * info, int what, int max_stats,
+ rh_stats_t * stats);
+
+/* Simple dump of remote heap info */
+extern void rh_dump(rh_info_t * info);
+
+/* Set owner of taken block */
+extern int rh_set_owner(rh_info_t * info, void *start, const char *owner);
+
+#endif /* __ASM_PPC_RHEAP_H__ */
diff --git a/include/asm-ppc/rtc.h b/include/asm-ppc/rtc.h
new file mode 100644
index 0000000..05fbf91
--- /dev/null
+++ b/include/asm-ppc/rtc.h
@@ -0,0 +1,95 @@
+/*
+ * inclue/asm-ppc/rtc.h
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Based on:
+ * include/asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ *
+ * And the old drivers/macintosh/rtc.c which was heavily based on:
+ * Linux/SPARC Real Time Clock Driver
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ *
+ * With additional work by Paul Mackerras and Franz Sirl.
+ */
+
+#ifndef __ASM_RTC_H__
+#define __ASM_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#define RTC_PIE 0x40 /* periodic interrupt enable */
+#define RTC_AIE 0x20 /* alarm interrupt enable */
+#define RTC_UIE 0x10 /* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100 /* battery bad */
+#define RTC_SQWE 0x08 /* enable square-wave output */
+#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
+#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+ if (ppc_md.get_rtc_time) {
+ unsigned long nowtime;
+
+ nowtime = (ppc_md.get_rtc_time)();
+
+ to_tm(nowtime, time);
+
+ time->tm_year -= 1900;
+ time->tm_mon -= 1; /* Make sure userland has a 0-based month */
+ }
+ return RTC_24H;
+}
+
+/* Set the current date and time in the real time clock. */
+static inline int set_rtc_time(struct rtc_time *time)
+{
+ if (ppc_md.get_rtc_time) {
+ unsigned long nowtime;
+
+ nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
+ time->tm_mday, time->tm_hour, time->tm_min,
+ time->tm_sec);
+
+ (ppc_md.set_rtc_time)(nowtime);
+
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+ struct rtc_time h;
+
+ get_rtc_time(&h);
+ return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+ return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+ return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_RTC_H__ */
diff --git a/include/asm-ppc/rwsem.h b/include/asm-ppc/rwsem.h
new file mode 100644
index 0000000..3e738f4
--- /dev/null
+++ b/include/asm-ppc/rwsem.h
@@ -0,0 +1,172 @@
+/*
+ * include/asm-ppc/rwsem.h: R/W semaphores for PPC using the stuff
+ * in lib/rwsem.c. Adapted largely from include/asm-i386/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ */
+
+#ifndef _PPC_RWSEM_H
+#define _PPC_RWSEM_H
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+ /* XXX this should be able to be an atomic_t -- paulus */
+ signed long count;
+#define RWSEM_UNLOCKED_VALUE 0x00000000
+#define RWSEM_ACTIVE_BIAS 0x00000001
+#define RWSEM_ACTIVE_MASK 0x0000ffff
+#define RWSEM_WAITING_BIAS (-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+ spinlock_t wait_lock;
+ struct list_head wait_list;
+#if RWSEM_DEBUG
+ int debug;
+#endif
+};
+
+/*
+ * initialisation
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT , 0
+#else
+#define __RWSEM_DEBUG_INIT /* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+ { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+ LIST_HEAD_INIT((name).wait_list) \
+ __RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name) \
+ struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+ sem->count = RWSEM_UNLOCKED_VALUE;
+ spin_lock_init(&sem->wait_lock);
+ INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+ sem->debug = 0;
+#endif
+}
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+ if (atomic_inc_return((atomic_t *)(&sem->count)) > 0)
+ smp_wmb();
+ else
+ rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+ int tmp;
+
+ while ((tmp = sem->count) >= 0) {
+ if (tmp == cmpxchg(&sem->count, tmp,
+ tmp + RWSEM_ACTIVE_READ_BIAS)) {
+ smp_wmb();
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+ int tmp;
+
+ tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+ (atomic_t *)(&sem->count));
+ if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
+ smp_wmb();
+ else
+ rwsem_down_write_failed(sem);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+ int tmp;
+
+ tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+ RWSEM_ACTIVE_WRITE_BIAS);
+ smp_wmb();
+ return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+ int tmp;
+
+ smp_wmb();
+ tmp = atomic_dec_return((atomic_t *)(&sem->count));
+ if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
+ rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+ smp_wmb();
+ if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+ (atomic_t *)(&sem->count)) < 0)
+ rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+ atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+ int tmp;
+
+ smp_wmb();
+ tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+ if (tmp < 0)
+ rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+ smp_mb();
+ return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_RWSEM_XADD_H */
diff --git a/include/asm-ppc/scatterlist.h b/include/asm-ppc/scatterlist.h
new file mode 100644
index 0000000..f21f18f
--- /dev/null
+++ b/include/asm-ppc/scatterlist.h
@@ -0,0 +1,25 @@
+#ifdef __KERNEL__
+#ifndef _PPC_SCATTERLIST_H
+#define _PPC_SCATTERLIST_H
+
+#include <asm/dma.h>
+
+struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#endif /* !(_PPC_SCATTERLIST_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/sections.h b/include/asm-ppc/sections.h
new file mode 100644
index 0000000..ba8f43a
--- /dev/null
+++ b/include/asm-ppc/sections.h
@@ -0,0 +1,33 @@
+#ifdef __KERNEL__
+#ifndef _PPC_SECTIONS_H
+#define _PPC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#define __pmac __attribute__ ((__section__ (".pmac.text")))
+#define __pmacdata __attribute__ ((__section__ (".pmac.data")))
+#define __pmacfunc(__argpmac) \
+ __argpmac __pmac; \
+ __argpmac
+
+#define __prep __attribute__ ((__section__ (".prep.text")))
+#define __prepdata __attribute__ ((__section__ (".prep.data")))
+#define __prepfunc(__argprep) \
+ __argprep __prep; \
+ __argprep
+
+#define __chrp __attribute__ ((__section__ (".chrp.text")))
+#define __chrpdata __attribute__ ((__section__ (".chrp.data")))
+#define __chrpfunc(__argchrp) \
+ __argchrp __chrp; \
+ __argchrp
+
+/* this is actually just common chrp/pmac code, not OF code -- Cort */
+#define __openfirmware __attribute__ ((__section__ (".openfirmware.text")))
+#define __openfirmwaredata __attribute__ ((__section__ (".openfirmware.data")))
+#define __openfirmwarefunc(__argopenfirmware) \
+ __argopenfirmware __openfirmware; \
+ __argopenfirmware
+
+#endif /* _PPC_SECTIONS_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/segment.h b/include/asm-ppc/segment.h
new file mode 100644
index 0000000..0f2f742
--- /dev/null
+++ b/include/asm-ppc/segment.h
@@ -0,0 +1 @@
+#include <asm/uaccess.h>
diff --git a/include/asm-ppc/semaphore.h b/include/asm-ppc/semaphore.h
new file mode 100644
index 0000000..89e6e73
--- /dev/null
+++ b/include/asm-ppc/semaphore.h
@@ -0,0 +1,111 @@
+#ifndef _PPC_SEMAPHORE_H
+#define _PPC_SEMAPHORE_H
+
+/*
+ * Swiped from asm-sparc/semaphore.h and modified
+ * -- Cort (cort@cs.nmt.edu)
+ *
+ * Stole some rw spinlock-based semaphore stuff from asm-alpha/semaphore.h
+ * -- Ani Joshi (ajoshi@unixbox.com)
+ *
+ * Remove spinlock-based RW semaphores; RW semaphore definitions are
+ * now in rwsem.h and we use the generic lib/rwsem.c implementation.
+ * Rework semaphores to use atomic_dec_if_positive.
+ * -- Paul Mackerras (paulus@samba.org)
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+struct semaphore {
+ /*
+ * Note that any negative value of count is equivalent to 0,
+ * but additionally indicates that some process(es) might be
+ * sleeping on `wait'.
+ */
+ atomic_t count;
+ wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n) \
+{ \
+ .count = ATOMIC_INIT(n), \
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
+}
+
+#define __MUTEX_INITIALIZER(name) \
+ __SEMAPHORE_INITIALIZER(name, 1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+ atomic_set(&sem->count, val);
+ init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+ sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+ sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore * sem);
+extern int __down_interruptible(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+extern inline void down(struct semaphore * sem)
+{
+ might_sleep();
+
+ /*
+ * Try to get the semaphore, take the slow path if we fail.
+ */
+ if (atomic_dec_return(&sem->count) < 0)
+ __down(sem);
+ smp_wmb();
+}
+
+extern inline int down_interruptible(struct semaphore * sem)
+{
+ int ret = 0;
+
+ might_sleep();
+
+ if (atomic_dec_return(&sem->count) < 0)
+ ret = __down_interruptible(sem);
+ smp_wmb();
+ return ret;
+}
+
+extern inline int down_trylock(struct semaphore * sem)
+{
+ int ret;
+
+ ret = atomic_dec_if_positive(&sem->count) < 0;
+ smp_wmb();
+ return ret;
+}
+
+extern inline void up(struct semaphore * sem)
+{
+ smp_wmb();
+ if (atomic_inc_return(&sem->count) <= 0)
+ __up(sem);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_PPC_SEMAPHORE_H) */
diff --git a/include/asm-ppc/sembuf.h b/include/asm-ppc/sembuf.h
new file mode 100644
index 0000000..883f682
--- /dev/null
+++ b/include/asm-ppc/sembuf.h
@@ -0,0 +1,19 @@
+#ifndef _PPC_SEMBUF_H
+#define _PPC_SEMBUF_H
+
+/*
+ * The semid64_ds structure for PPC architecture.
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ unsigned int __unused1;
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned int __unused2;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _PPC_SEMBUF_H */
diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h
new file mode 100644
index 0000000..6d47438
--- /dev/null
+++ b/include/asm-ppc/serial.h
@@ -0,0 +1,57 @@
+/*
+ * include/asm-ppc/serial.h
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_SERIAL_H__
+#define __ASM_SERIAL_H__
+
+#include <linux/config.h>
+
+#if defined(CONFIG_EV64260)
+#include <platforms/ev64260.h>
+#elif defined(CONFIG_CHESTNUT)
+#include <platforms/chestnut.h>
+#elif defined(CONFIG_GEMINI)
+#include <platforms/gemini_serial.h>
+#elif defined(CONFIG_POWERPMC250)
+#include <platforms/powerpmc250.h>
+#elif defined(CONFIG_LOPEC)
+#include <platforms/lopec.h>
+#elif defined(CONFIG_MCPN765)
+#include <platforms/mcpn765.h>
+#elif defined(CONFIG_MVME5100)
+#include <platforms/mvme5100.h>
+#elif defined(CONFIG_PAL4)
+#include <platforms/pal4_serial.h>
+#elif defined(CONFIG_PRPMC750)
+#include <platforms/prpmc750.h>
+#elif defined(CONFIG_PRPMC800)
+#include <platforms/prpmc800.h>
+#elif defined(CONFIG_SANDPOINT)
+#include <platforms/sandpoint.h>
+#elif defined(CONFIG_SPRUCE)
+#include <platforms/spruce.h>
+#elif defined(CONFIG_4xx)
+#include <asm/ibm4xx.h>
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+#elif defined(CONFIG_85xx)
+#include <asm/mpc85xx.h>
+#elif defined(CONFIG_RADSTONE_PPC7D)
+#include <platforms/radstone_ppc7d.h>
+#else
+
+/*
+ * XXX Assume for now it has PC-style ISA serial ports.
+ * This is true for PReP and CHRP at least.
+ */
+#include <asm/pc_serial.h>
+
+#if defined(CONFIG_MAC_SERIAL)
+#define SERIAL_DEV_OFFSET ((_machine == _MACH_prep || _machine == _MACH_chrp) ? 0 : 2)
+#endif
+
+#endif /* !CONFIG_GEMINI and others */
+#endif /* __ASM_SERIAL_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/setup.h b/include/asm-ppc/setup.h
new file mode 100644
index 0000000..d2d19ee
--- /dev/null
+++ b/include/asm-ppc/setup.h
@@ -0,0 +1,14 @@
+#ifdef __KERNEL__
+#ifndef _PPC_SETUP_H
+#define _PPC_SETUP_H
+
+#define m68k_num_memory num_memory
+#define m68k_memory memory
+
+#include <asm-m68k/setup.h>
+/* We have a bigger command line buffer. */
+#undef COMMAND_LINE_SIZE
+#define COMMAND_LINE_SIZE 512
+
+#endif /* _PPC_SETUP_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/shmbuf.h b/include/asm-ppc/shmbuf.h
new file mode 100644
index 0000000..7ac0bd3
--- /dev/null
+++ b/include/asm-ppc/shmbuf.h
@@ -0,0 +1,37 @@
+#ifndef _PPC_SHMBUF_H
+#define _PPC_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for PPC architecture.
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ unsigned int __unused1;
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned int __unused2;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned int __unused3;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned int __unused4;
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused5;
+ unsigned long __unused6;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _PPC_SHMBUF_H */
diff --git a/include/asm-ppc/shmparam.h b/include/asm-ppc/shmparam.h
new file mode 100644
index 0000000..d625060
--- /dev/null
+++ b/include/asm-ppc/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _PPC_SHMPARAM_H
+#define _PPC_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _PPC_SHMPARAM_H */
diff --git a/include/asm-ppc/sigcontext.h b/include/asm-ppc/sigcontext.h
new file mode 100644
index 0000000..fc5e358
--- /dev/null
+++ b/include/asm-ppc/sigcontext.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_PPC_SIGCONTEXT_H
+#define _ASM_PPC_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+
+struct sigcontext {
+ unsigned long _unused[4];
+ int signal;
+ unsigned long handler;
+ unsigned long oldmask;
+ struct pt_regs *regs;
+};
+
+#endif
diff --git a/include/asm-ppc/siginfo.h b/include/asm-ppc/siginfo.h
new file mode 100644
index 0000000..4b9435b
--- /dev/null
+++ b/include/asm-ppc/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _PPC_SIGINFO_H
+#define _PPC_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-ppc/signal.h b/include/asm-ppc/signal.h
new file mode 100644
index 0000000..8cc8b88
--- /dev/null
+++ b/include/asm-ppc/signal.h
@@ -0,0 +1,179 @@
+#ifndef _ASMPPC_SIGNAL_H
+#define _ASMPPC_SIGNAL_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif /* __KERNEL__ */
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE SA_ONESHOT
+#define SA_SAMPLE_RANDOM SA_RESTART
+#define SA_SHIRQ 0x04000000
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK 0 /* for blocking signals */
+#define SIG_UNBLOCK 1 /* for unblocking signals */
+#define SIG_SETMASK 2 /* for setting the signal mask */
+
+/* Type of a signal handler. */
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif /* __KERNEL__ */
+
+/*
+ * These are parameters to dbg_sigreturn syscall. They enable or
+ * disable certain debugging things that can be done from signal
+ * handlers. The dbg_sigreturn syscall *must* be called from a
+ * SA_SIGINFO signal so the ucontext can be passed to it. It takes an
+ * array of struct sig_dbg_op, which has the debug operations to
+ * perform before returning from the signal.
+ */
+struct sig_dbg_op {
+ int dbg_type;
+ unsigned long dbg_value;
+};
+
+/* Enable or disable single-stepping. The value sets the state. */
+#define SIG_DBG_SINGLE_STEPPING 1
+
+/* Enable or disable branch tracing. The value sets the state. */
+#define SIG_DBG_BRANCH_TRACING 2
+
+#endif
diff --git a/include/asm-ppc/smp.h b/include/asm-ppc/smp.h
new file mode 100644
index 0000000..ebfb614
--- /dev/null
+++ b/include/asm-ppc/smp.h
@@ -0,0 +1,70 @@
+/* smp.h: PPC specific SMP stuff.
+ *
+ * Original was a copy of sparc smp.h. Now heavily modified
+ * for PPC.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_SMP_H
+#define _PPC_SMP_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/cpumask.h>
+#include <linux/threads.h>
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+struct cpuinfo_PPC {
+ unsigned long loops_per_jiffy;
+ unsigned long pvr;
+ unsigned long *pgd_cache;
+ unsigned long *pte_cache;
+ unsigned long pgtable_cache_sz;
+};
+
+extern struct cpuinfo_PPC cpu_data[];
+extern cpumask_t cpu_online_map;
+extern cpumask_t cpu_possible_map;
+extern unsigned long smp_proc_in_lock[];
+extern volatile unsigned long cpu_callin_map[];
+extern int smp_tb_synchronized;
+
+extern void smp_send_tlb_invalidate(int);
+extern void smp_send_xmon_break(int cpu);
+struct pt_regs;
+extern void smp_message_recv(int, struct pt_regs *);
+
+#define NO_PROC_ID 0xFF /* No processor magic marker */
+#define PROC_CHANGE_PENALTY 20
+
+#define smp_processor_id() (current_thread_info()->cpu)
+
+extern int __cpu_up(unsigned int cpu);
+
+extern int smp_hw_index[];
+#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()])
+
+struct klock_info_struct {
+ unsigned long kernel_flag;
+ unsigned char akp;
+};
+
+extern struct klock_info_struct klock_info;
+#define KLOCK_HELD 0xffffffff
+#define KLOCK_CLEAR 0x0
+
+#endif /* __ASSEMBLY__ */
+
+#else /* !(CONFIG_SMP) */
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* !(_PPC_SMP_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/socket.h b/include/asm-ppc/socket.h
new file mode 100644
index 0000000..4134376
--- /dev/null
+++ b/include/asm-ppc/socket.h
@@ -0,0 +1,56 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp */
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_RCVLOWAT 16
+#define SO_SNDLOWAT 17
+#define SO_RCVTIMEO 18
+#define SO_SNDTIMEO 19
+#define SO_PASSCRED 20
+#define SO_PEERCRED 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-ppc/sockios.h b/include/asm-ppc/sockios.h
new file mode 100644
index 0000000..385aedc
--- /dev/null
+++ b/include/asm-ppc/sockios.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_PPC_SOCKIOS_H
+#define _ASM_PPC_SOCKIOS_H
+
+#if 0 /* These are defined this way on Alpha - maybe later. */
+/* Socket-level I/O control calls. */
+
+#define FIOGETOWN _IOR('f', 123, int)
+#define FIOSETOWN _IOW('f', 124, int)
+
+#define SIOCATMARK _IOR('s', 7, int)
+#define SIOCSPGRP _IOW('s', 8, pid_t)
+#define SIOCGPGRP _IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP 0x8906 /* Get stamp - linux-specific */
+#endif
+
+#endif /* _ASM_PPC_SOCKIOS_H */
diff --git a/include/asm-ppc/spinlock.h b/include/asm-ppc/spinlock.h
new file mode 100644
index 0000000..909199a
--- /dev/null
+++ b/include/asm-ppc/spinlock.h
@@ -0,0 +1,215 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/system.h>
+
+/*
+ * Simple spin lock operations.
+ */
+
+typedef struct {
+ volatile unsigned long lock;
+#ifdef CONFIG_DEBUG_SPINLOCK
+ volatile unsigned long owner_pc;
+ volatile unsigned long owner_cpu;
+#endif
+#ifdef CONFIG_PREEMPT
+ unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#ifdef __KERNEL__
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define SPINLOCK_DEBUG_INIT , 0, 0
+#else
+#define SPINLOCK_DEBUG_INIT /* */
+#endif
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 SPINLOCK_DEBUG_INIT }
+
+#define spin_lock_init(x) do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
+#define spin_is_locked(x) ((x)->lock != 0)
+#define spin_unlock_wait(x) do { barrier(); } while(spin_is_locked(x))
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+
+static inline void _raw_spin_lock(spinlock_t *lock)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ "b 1f # spin_lock\n\
+2: lwzx %0,0,%1\n\
+ cmpwi 0,%0,0\n\
+ bne+ 2b\n\
+1: lwarx %0,0,%1\n\
+ cmpwi 0,%0,0\n\
+ bne- 2b\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %2,0,%1\n\
+ bne- 2b\n\
+ isync"
+ : "=&r"(tmp)
+ : "r"(&lock->lock), "r"(1)
+ : "cr0", "memory");
+}
+
+static inline void _raw_spin_unlock(spinlock_t *lock)
+{
+ __asm__ __volatile__("eieio # spin_unlock": : :"memory");
+ lock->lock = 0;
+}
+
+#define _raw_spin_trylock(l) (!test_and_set_bit(0,&(l)->lock))
+
+#else
+
+extern void _raw_spin_lock(spinlock_t *lock);
+extern void _raw_spin_unlock(spinlock_t *lock);
+extern int _raw_spin_trylock(spinlock_t *lock);
+
+#endif
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+typedef struct {
+ volatile signed int lock;
+#ifdef CONFIG_PREEMPT
+ unsigned int break_lock;
+#endif
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0 }
+#define rwlock_init(lp) do { *(lp) = RW_LOCK_UNLOCKED; } while(0)
+
+#define read_can_lock(rw) ((rw)->lock >= 0)
+#define write_can_lock(rw) (!(rw)->lock)
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+
+static __inline__ int _raw_read_trylock(rwlock_t *rw)
+{
+ signed int tmp;
+
+ __asm__ __volatile__(
+"2: lwarx %0,0,%1 # read_trylock\n\
+ addic. %0,%0,1\n\
+ ble- 1f\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %0,0,%1\n\
+ bne- 2b\n\
+ isync\n\
+1:"
+ : "=&r"(tmp)
+ : "r"(&rw->lock)
+ : "cr0", "memory");
+
+ return tmp > 0;
+}
+
+static __inline__ void _raw_read_lock(rwlock_t *rw)
+{
+ signed int tmp;
+
+ __asm__ __volatile__(
+ "b 2f # read_lock\n\
+1: lwzx %0,0,%1\n\
+ cmpwi 0,%0,0\n\
+ blt+ 1b\n\
+2: lwarx %0,0,%1\n\
+ addic. %0,%0,1\n\
+ ble- 1b\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %0,0,%1\n\
+ bne- 2b\n\
+ isync"
+ : "=&r"(tmp)
+ : "r"(&rw->lock)
+ : "cr0", "memory");
+}
+
+static __inline__ void _raw_read_unlock(rwlock_t *rw)
+{
+ signed int tmp;
+
+ __asm__ __volatile__(
+ "eieio # read_unlock\n\
+1: lwarx %0,0,%1\n\
+ addic %0,%0,-1\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %0,0,%1\n\
+ bne- 1b"
+ : "=&r"(tmp)
+ : "r"(&rw->lock)
+ : "cr0", "memory");
+}
+
+static __inline__ int _raw_write_trylock(rwlock_t *rw)
+{
+ signed int tmp;
+
+ __asm__ __volatile__(
+"2: lwarx %0,0,%1 # write_trylock\n\
+ cmpwi 0,%0,0\n\
+ bne- 1f\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %2,0,%1\n\
+ bne- 2b\n\
+ isync\n\
+1:"
+ : "=&r"(tmp)
+ : "r"(&rw->lock), "r"(-1)
+ : "cr0", "memory");
+
+ return tmp == 0;
+}
+
+static __inline__ void _raw_write_lock(rwlock_t *rw)
+{
+ signed int tmp;
+
+ __asm__ __volatile__(
+ "b 2f # write_lock\n\
+1: lwzx %0,0,%1\n\
+ cmpwi 0,%0,0\n\
+ bne+ 1b\n\
+2: lwarx %0,0,%1\n\
+ cmpwi 0,%0,0\n\
+ bne- 1b\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %2,0,%1\n\
+ bne- 2b\n\
+ isync"
+ : "=&r"(tmp)
+ : "r"(&rw->lock), "r"(-1)
+ : "cr0", "memory");
+}
+
+static __inline__ void _raw_write_unlock(rwlock_t *rw)
+{
+ __asm__ __volatile__("eieio # write_unlock": : :"memory");
+ rw->lock = 0;
+}
+
+#else
+
+extern void _raw_read_lock(rwlock_t *rw);
+extern void _raw_read_unlock(rwlock_t *rw);
+extern void _raw_write_lock(rwlock_t *rw);
+extern void _raw_write_unlock(rwlock_t *rw);
+extern int _raw_read_trylock(rwlock_t *rw);
+extern int _raw_write_trylock(rwlock_t *rw);
+
+#endif
+
+#endif /* __ASM_SPINLOCK_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/stat.h b/include/asm-ppc/stat.h
new file mode 100644
index 0000000..cadb342
--- /dev/null
+++ b/include/asm-ppc/stat.h
@@ -0,0 +1,69 @@
+#ifndef _PPC_STAT_H
+#define _PPC_STAT_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif /* __KERNEL__ */
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+ unsigned st_dev;
+ ino_t st_ino;
+ mode_t st_mode;
+ nlink_t st_nlink;
+ uid_t st_uid;
+ gid_t st_gid;
+ unsigned st_rdev;
+ off_t st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1.
+ */
+struct stat64 {
+ unsigned long long st_dev; /* Device. */
+ unsigned long long st_ino; /* File serial number. */
+ unsigned int st_mode; /* File mode. */
+ unsigned int st_nlink; /* Link count. */
+ unsigned int st_uid; /* User ID of the file's owner. */
+ unsigned int st_gid; /* Group ID of the file's group. */
+ unsigned long long st_rdev; /* Device number, if device. */
+ unsigned short int __pad2;
+ long long st_size; /* Size of file, in bytes. */
+ long st_blksize; /* Optimal block size for I/O. */
+
+ long long st_blocks; /* Number 512-byte blocks allocated. */
+ long st_atime; /* Time of last access. */
+ unsigned long st_atime_nsec;
+ long st_mtime; /* Time of last modification. */
+ unsigned long int st_mtime_nsec;
+ long st_ctime; /* Time of last status change. */
+ unsigned long int st_ctime_nsec;
+ unsigned long int __unused4;
+ unsigned long int __unused5;
+};
+#endif
diff --git a/include/asm-ppc/statfs.h b/include/asm-ppc/statfs.h
new file mode 100644
index 0000000..807c699
--- /dev/null
+++ b/include/asm-ppc/statfs.h
@@ -0,0 +1,8 @@
+#ifndef _PPC_STATFS_H
+#define _PPC_STATFS_H
+
+#include <asm-generic/statfs.h>
+#endif
+
+
+
diff --git a/include/asm-ppc/string.h b/include/asm-ppc/string.h
new file mode 100644
index 0000000..2255759
--- /dev/null
+++ b/include/asm-ppc/string.h
@@ -0,0 +1,32 @@
+#ifndef _PPC_STRING_H_
+#define _PPC_STRING_H_
+
+#ifdef __KERNEL__
+
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRNCPY
+#define __HAVE_ARCH_STRLEN
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRCAT
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_MEMCHR
+
+extern int strcasecmp(const char *, const char *);
+extern int strncasecmp(const char *, const char *, int);
+extern char * strcpy(char *,const char *);
+extern char * strncpy(char *,const char *, __kernel_size_t);
+extern __kernel_size_t strlen(const char *);
+extern int strcmp(const char *,const char *);
+extern char * strcat(char *, const char *);
+extern void * memset(void *,int,__kernel_size_t);
+extern void * memcpy(void *,const void *,__kernel_size_t);
+extern void * memmove(void *,const void *,__kernel_size_t);
+extern int memcmp(const void *,const void *,__kernel_size_t);
+extern void * memchr(const void *,int,__kernel_size_t);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-ppc/suspend.h b/include/asm-ppc/suspend.h
new file mode 100644
index 0000000..3df9f32
--- /dev/null
+++ b/include/asm-ppc/suspend.h
@@ -0,0 +1,12 @@
+static inline int arch_prepare_suspend(void)
+{
+ return 0;
+}
+
+static inline void save_processor_state(void)
+{
+}
+
+static inline void restore_processor_state(void)
+{
+}
diff --git a/include/asm-ppc/system.h b/include/asm-ppc/system.h
new file mode 100644
index 0000000..82395f3
--- /dev/null
+++ b/include/asm-ppc/system.h
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef __PPC_SYSTEM_H
+#define __PPC_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+
+#include <asm/atomic.h>
+#include <asm/hw_irq.h>
+
+/*
+ * Memory barrier.
+ * The sync instruction guarantees that all memory accesses initiated
+ * by this processor have been performed (with respect to all other
+ * mechanisms that access memory). The eieio instruction is a barrier
+ * providing an ordering (separately) for (a) cacheable stores and (b)
+ * loads and stores to non-cacheable memory (e.g. I/O devices).
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ * read_barrier_depends() prevents data-dependent loads being reordered
+ * across this point (nop on PPC).
+ *
+ * We can use the eieio instruction for wmb, but since it doesn't
+ * give any ordering guarantees about loads, we have to use the
+ * stronger but slower sync instruction for mb and rmb.
+ */
+#define mb() __asm__ __volatile__ ("sync" : : : "memory")
+#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
+#define wmb() __asm__ __volatile__ ("eieio" : : : "memory")
+#define read_barrier_depends() do { } while(0)
+
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while(0)
+#endif /* CONFIG_SMP */
+
+#ifdef __KERNEL__
+struct task_struct;
+struct pt_regs;
+
+extern void print_backtrace(unsigned long *);
+extern void show_regs(struct pt_regs * regs);
+extern void flush_instruction_cache(void);
+extern void hard_reset_now(void);
+extern void poweroff_now(void);
+#ifdef CONFIG_6xx
+extern long _get_L2CR(void);
+extern long _get_L3CR(void);
+extern void _set_L2CR(unsigned long);
+extern void _set_L3CR(unsigned long);
+#else
+#define _get_L2CR() 0L
+#define _get_L3CR() 0L
+#define _set_L2CR(val) do { } while(0)
+#define _set_L3CR(val) do { } while(0)
+#endif
+extern void via_cuda_init(void);
+extern void pmac_nvram_init(void);
+extern void read_rtc_time(void);
+extern void pmac_find_display(void);
+extern void giveup_fpu(struct task_struct *);
+extern void enable_kernel_fp(void);
+extern void enable_kernel_altivec(void);
+extern void giveup_altivec(struct task_struct *);
+extern void load_up_altivec(struct task_struct *);
+extern void giveup_spe(struct task_struct *);
+extern void load_up_spe(struct task_struct *);
+extern int fix_alignment(struct pt_regs *);
+extern void cvt_fd(float *from, double *to, unsigned long *fpscr);
+extern void cvt_df(double *from, float *to, unsigned long *fpscr);
+extern int call_rtas(const char *, int, int, unsigned long *, ...);
+extern void cacheable_memzero(void *p, unsigned int nb);
+extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
+extern void bad_page_fault(struct pt_regs *, unsigned long, int);
+extern void die(const char *, struct pt_regs *, long);
+
+struct device_node;
+extern void note_scsi_host(struct device_node *, void *);
+
+extern struct task_struct *__switch_to(struct task_struct *,
+ struct task_struct *);
+#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next)))
+
+struct thread_struct;
+extern struct task_struct *_switch(struct thread_struct *prev,
+ struct thread_struct *next);
+
+extern unsigned int rtas_data;
+
+static __inline__ unsigned long
+xchg_u32(volatile void *p, unsigned long val)
+{
+ unsigned long prev;
+
+ __asm__ __volatile__ ("\n\
+1: lwarx %0,0,%2 \n"
+ PPC405_ERR77(0,%2)
+" stwcx. %3,0,%2 \n\
+ bne- 1b"
+ : "=&r" (prev), "=m" (*(volatile unsigned long *)p)
+ : "r" (p), "r" (val), "m" (*(volatile unsigned long *)p)
+ : "cc", "memory");
+
+ return prev;
+}
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) (xchg((ptr),1))
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+ switch (size) {
+ case 4:
+ return (unsigned long) xchg_u32(ptr, x);
+#if 0 /* xchg_u64 doesn't exist on 32-bit PPC */
+ case 8:
+ return (unsigned long) xchg_u64(ptr, x);
+#endif /* 0 */
+ }
+ __xchg_called_with_bad_pointer();
+ return x;
+
+
+}
+
+extern inline void * xchg_ptr(void * m, void * val)
+{
+ return (void *) xchg_u32(m, (unsigned long) val);
+}
+
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static __inline__ unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
+{
+ unsigned int prev;
+
+ __asm__ __volatile__ ("\n\
+1: lwarx %0,0,%2 \n\
+ cmpw 0,%0,%3 \n\
+ bne 2f \n"
+ PPC405_ERR77(0,%2)
+" stwcx. %4,0,%2 \n\
+ bne- 1b\n"
+#ifdef CONFIG_SMP
+" sync\n"
+#endif /* CONFIG_SMP */
+"2:"
+ : "=&r" (prev), "=m" (*p)
+ : "r" (p), "r" (old), "r" (new), "m" (*p)
+ : "cc", "memory");
+
+ return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+ if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+ switch (size) {
+ case 4:
+ return __cmpxchg_u32(ptr, old, new);
+#if 0 /* we don't have __cmpxchg_u64 on 32-bit PPC */
+ case 8:
+ return __cmpxchg_u64(ptr, old, new);
+#endif /* 0 */
+ }
+ __cmpxchg_called_with_bad_pointer();
+ return old;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ({ \
+ __typeof__(*(ptr)) _o_ = (o); \
+ __typeof__(*(ptr)) _n_ = (n); \
+ (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
+ (unsigned long)_n_, sizeof(*(ptr))); \
+ })
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+#endif /* __PPC_SYSTEM_H */
diff --git a/include/asm-ppc/termbits.h b/include/asm-ppc/termbits.h
new file mode 100644
index 0000000..c343fb7
--- /dev/null
+++ b/include/asm-ppc/termbits.h
@@ -0,0 +1,185 @@
+#ifndef _PPC_TERMBITS_H
+#define _PPC_TERMBITS_H
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+/*
+ * termios type and macro definitions. Be careful about adding stuff
+ * to this file since it's used in GNU libc and there are strict rules
+ * concerning namespace pollution.
+ */
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_cc[NCCS]; /* control characters */
+ cc_t c_line; /* line discipline (== c_cc[19]) */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VMIN 5
+#define VEOL 6
+#define VTIME 7
+#define VEOL2 8
+#define VSWTC 9
+
+#define VWERASE 10
+#define VREPRINT 11
+#define VSUSP 12
+#define VSTART 13
+#define VSTOP 14
+#define VLNEXT 15
+#define VDISCARD 16
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IXON 0001000
+#define IXOFF 0002000
+#define IXANY 0004000
+#define IUCLC 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define ONLCR 0000002
+#define OLCUC 0000004
+
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+
+#define OFILL 00000100
+#define OFDEL 00000200
+#define NLDLY 00001400
+#define NL0 00000000
+#define NL1 00000400
+#define NL2 00001000
+#define NL3 00001400
+#define TABDLY 00006000
+#define TAB0 00000000
+#define TAB1 00002000
+#define TAB2 00004000
+#define TAB3 00006000
+#define XTABS 00006000 /* required by POSIX to == TAB3 */
+#define CRDLY 00030000
+#define CR0 00000000
+#define CR1 00010000
+#define CR2 00020000
+#define CR3 00030000
+#define FFDLY 00040000
+#define FF0 00000000
+#define FF1 00040000
+#define BSDLY 00100000
+#define BS0 00000000
+#define BS1 00100000
+#define VTDLY 00200000
+#define VT0 00000000
+#define VT1 00200000
+
+/* c_cflag bit meaning */
+#define CBAUD 0000377
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CBAUDEX 0000000
+#define B57600 00020
+#define B115200 00021
+#define B230400 00022
+#define B460800 00023
+#define B500000 00024
+#define B576000 00025
+#define B921600 00026
+#define B1000000 00027
+#define B1152000 00030
+#define B1500000 00031
+#define B2000000 00032
+#define B2500000 00033
+#define B3000000 00034
+#define B3500000 00035
+#define B4000000 00036
+
+#define CSIZE 00001400
+#define CS5 00000000
+#define CS6 00000400
+#define CS7 00001000
+#define CS8 00001400
+
+#define CSTOPB 00002000
+#define CREAD 00004000
+#define PARENB 00010000
+#define PARODD 00020000
+#define HUPCL 00040000
+
+#define CLOCAL 00100000
+#define CRTSCTS 020000000000 /* flow control */
+
+/* c_lflag bits */
+#define ISIG 0x00000080
+#define ICANON 0x00000100
+#define XCASE 0x00004000
+#define ECHO 0x00000008
+#define ECHOE 0x00000002
+#define ECHOK 0x00000004
+#define ECHONL 0x00000010
+#define NOFLSH 0x80000000
+#define TOSTOP 0x00400000
+#define ECHOCTL 0x00000040
+#define ECHOPRT 0x00000020
+#define ECHOKE 0x00000001
+#define FLUSHO 0x00800000
+#define PENDIN 0x20000000
+#define IEXTEN 0x00000400
+
+/* Values for the ACTION argument to `tcflow'. */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* Values for the QUEUE_SELECTOR argument to `tcflush'. */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _PPC_TERMBITS_H */
diff --git a/include/asm-ppc/termios.h b/include/asm-ppc/termios.h
new file mode 100644
index 0000000..97c6287
--- /dev/null
+++ b/include/asm-ppc/termios.h
@@ -0,0 +1,232 @@
+#ifndef _PPC_TERMIOS_H
+#define _PPC_TERMIOS_H
+
+/*
+ * Liberally adapted from alpha/termios.h. In particular, the c_cc[]
+ * fields have been reordered so that termio & termios share the
+ * common subset in the same order (for brain dead programs that don't
+ * know or care about the differences).
+ */
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+struct sgttyb {
+ char sg_ispeed;
+ char sg_ospeed;
+ char sg_erase;
+ char sg_kill;
+ short sg_flags;
+};
+
+struct tchars {
+ char t_intrc;
+ char t_quitc;
+ char t_startc;
+ char t_stopc;
+ char t_eofc;
+ char t_brkc;
+};
+
+struct ltchars {
+ char t_suspc;
+ char t_dsuspc;
+ char t_rprntc;
+ char t_flushc;
+ char t_werasc;
+ char t_lnextc;
+};
+
+#define FIOCLEX _IO('f', 1)
+#define FIONCLEX _IO('f', 2)
+#define FIOASYNC _IOW('f', 125, int)
+#define FIONBIO _IOW('f', 126, int)
+#define FIONREAD _IOR('f', 127, int)
+#define TIOCINQ FIONREAD
+#define FIOQSIZE _IOR('f', 128, loff_t)
+
+#define TIOCGETP _IOR('t', 8, struct sgttyb)
+#define TIOCSETP _IOW('t', 9, struct sgttyb)
+#define TIOCSETN _IOW('t', 10, struct sgttyb) /* TIOCSETP wo flush */
+
+#define TIOCSETC _IOW('t', 17, struct tchars)
+#define TIOCGETC _IOR('t', 18, struct tchars)
+#define TCGETS _IOR('t', 19, struct termios)
+#define TCSETS _IOW('t', 20, struct termios)
+#define TCSETSW _IOW('t', 21, struct termios)
+#define TCSETSF _IOW('t', 22, struct termios)
+
+#define TCGETA _IOR('t', 23, struct termio)
+#define TCSETA _IOW('t', 24, struct termio)
+#define TCSETAW _IOW('t', 25, struct termio)
+#define TCSETAF _IOW('t', 28, struct termio)
+
+#define TCSBRK _IO('t', 29)
+#define TCXONC _IO('t', 30)
+#define TCFLSH _IO('t', 31)
+
+#define TIOCSWINSZ _IOW('t', 103, struct winsize)
+#define TIOCGWINSZ _IOR('t', 104, struct winsize)
+#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
+#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
+#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
+
+#define TIOCGLTC _IOR('t', 116, struct ltchars)
+#define TIOCSLTC _IOW('t', 117, struct ltchars)
+#define TIOCSPGRP _IOW('t', 118, int)
+#define TIOCGPGRP _IOR('t', 119, int)
+
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+
+#define TIOCSTI 0x5412
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 10
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+/* c_cc characters */
+#define _VINTR 0
+#define _VQUIT 1
+#define _VERASE 2
+#define _VKILL 3
+#define _VEOF 4
+#define _VMIN 5
+#define _VEOL 6
+#define _VTIME 7
+#define _VEOL2 8
+#define _VSWTC 9
+
+#ifdef __KERNEL__
+/* ^C ^\ del ^U ^D 1 0 0 0 0 ^W ^R ^Z ^Q ^S ^V ^U */
+#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025"
+#endif /* __KERNEL__ */
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+/* line disciplines */
+#define N_TTY 0
+#define N_SLIP 1
+#define N_MOUSE 2
+#define N_PPP 3
+#define N_STRIP 4
+#define N_AX25 5
+#define N_X25 6 /* X.25 async */
+#define N_6PACK 7
+#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964 9 /* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC 13 /* synchronous HDLC */
+#define N_SYNC_PPP 14
+#define N_HCI 15 /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+ unsigned short __tmp; \
+ get_user(__tmp,&(termio)->x); \
+ (termios)->x = (0xffff0000 & (termios)->x) | __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* __KERNEL__ */
+
+#endif /* _PPC_TERMIOS_H */
diff --git a/include/asm-ppc/thread_info.h b/include/asm-ppc/thread_info.h
new file mode 100644
index 0000000..f7f0152
--- /dev/null
+++ b/include/asm-ppc/thread_info.h
@@ -0,0 +1,99 @@
+/* thread_info.h: PPC low-level thread information
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ unsigned long local_flags; /* non-racy flags */
+ int cpu; /* cpu we're on */
+ int preempt_count;
+ struct restart_block restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .local_flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+ __asm__("rlwinm %0,1,0,0,18" : "=r"(ti));
+ return ti;
+}
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+ __get_free_pages(GFP_KERNEL, 1))
+#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Size of kernel stack for each process.
+ */
+#define THREAD_SIZE 8192 /* 2 pages */
+
+#define PREEMPT_ACTIVE 0x10000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling
+ TIF_NEED_RESCHED */
+#define TIF_MEMDIE 5
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+
+/*
+ * Non racy (local) flags bit numbers
+ */
+#define TIFL_FORCE_NOERROR 0 /* don't return error from current
+ syscall even if result < 0 */
+
+/* as above, but as bit values */
+#define _TIFL_FORCE_NOERROR (1<<TIFL_FORCE_NOERROR)
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-ppc/time.h b/include/asm-ppc/time.h
new file mode 100644
index 0000000..ce09b47
--- /dev/null
+++ b/include/asm-ppc/time.h
@@ -0,0 +1,157 @@
+/*
+ * Common time prototypes and such for all ppc machines.
+ *
+ * Written by Cort Dougan (cort@fsmlabs.com) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_TIME_H__
+#define __ASM_TIME_H__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/rtc.h>
+#include <linux/threads.h>
+
+#include <asm/reg.h>
+
+/* time.c */
+extern unsigned tb_ticks_per_jiffy;
+extern unsigned tb_to_us;
+extern unsigned tb_last_stamp;
+extern unsigned long disarm_decr[NR_CPUS];
+
+extern void to_tm(int tim, struct rtc_time * tm);
+extern time_t last_rtc_update;
+
+extern void set_dec_cpu6(unsigned int val);
+
+int via_calibrate_decr(void);
+
+/* Accessor functions for the decrementer register.
+ * The 4xx doesn't even have a decrementer. I tried to use the
+ * generic timer interrupt code, which seems OK, with the 4xx PIT
+ * in auto-reload mode. The problem is PIT stops counting when it
+ * hits zero. If it would wrap, we could use it just like a decrementer.
+ */
+static __inline__ unsigned int get_dec(void)
+{
+#if defined(CONFIG_40x)
+ return (mfspr(SPRN_PIT));
+#else
+ return (mfspr(SPRN_DEC));
+#endif
+}
+
+static __inline__ void set_dec(unsigned int val)
+{
+#if defined(CONFIG_40x)
+ return; /* Have to let it auto-reload */
+#elif defined(CONFIG_8xx_CPU6)
+ set_dec_cpu6(val);
+#else
+ mtspr(SPRN_DEC, val);
+#endif
+}
+
+/* Accessor functions for the timebase (RTC on 601) registers. */
+/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
+#ifdef CONFIG_6xx
+extern __inline__ int const __USE_RTC(void) {
+ return (mfspr(SPRN_PVR)>>16) == 1;
+}
+#else
+#define __USE_RTC() 0
+#endif
+
+extern __inline__ unsigned long get_tbl(void) {
+ unsigned long tbl;
+#if defined(CONFIG_403GCX)
+ asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
+#else
+ asm volatile("mftb %0" : "=r" (tbl));
+#endif
+ return tbl;
+}
+
+extern __inline__ unsigned long get_tbu(void) {
+ unsigned long tbl;
+#if defined(CONFIG_403GCX)
+ asm volatile("mfspr %0, 0x3dc" : "=r" (tbl));
+#else
+ asm volatile("mftbu %0" : "=r" (tbl));
+#endif
+ return tbl;
+}
+
+extern __inline__ void set_tb(unsigned int upper, unsigned int lower)
+{
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, upper);
+ mtspr(SPRN_TBWL, lower);
+}
+
+extern __inline__ unsigned long get_rtcl(void) {
+ unsigned long rtcl;
+ asm volatile("mfrtcl %0" : "=r" (rtcl));
+ return rtcl;
+}
+
+extern __inline__ unsigned long get_rtcu(void)
+{
+ unsigned long rtcu;
+ asm volatile("mfrtcu %0" : "=r" (rtcu));
+ return rtcu;
+}
+
+extern __inline__ unsigned get_native_tbl(void) {
+ if (__USE_RTC())
+ return get_rtcl();
+ else
+ return get_tbl();
+}
+
+/* On machines with RTC, this function can only be used safely
+ * after the timestamp and for 1 second. It is only used by gettimeofday
+ * however so it should not matter.
+ */
+extern __inline__ unsigned tb_ticks_since(unsigned tstamp) {
+ if (__USE_RTC()) {
+ int delta = get_rtcl() - tstamp;
+ return delta<0 ? delta + 1000000000 : delta;
+ } else {
+ return get_tbl() - tstamp;
+ }
+}
+
+#if 0
+extern __inline__ unsigned long get_bin_rtcl(void) {
+ unsigned long rtcl, rtcu1, rtcu2;
+ asm volatile("\
+1: mfrtcu %0\n\
+ mfrtcl %1\n\
+ mfrtcu %2\n\
+ cmpw %0,%2\n\
+ bne- 1b\n"
+ : "=r" (rtcu1), "=r" (rtcl), "=r" (rtcu2)
+ : : "cr0");
+ return rtcu2*1000000000+rtcl;
+}
+
+extern __inline__ unsigned binary_tbl(void) {
+ if (__USE_RTC())
+ return get_bin_rtcl();
+ else
+ return get_tbl();
+}
+#endif
+
+/* Use mulhwu to scale processor timebase to timeval */
+/* Specifically, this computes (x * y) / 2^32. -- paulus */
+#define mulhwu(x,y) \
+({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+
+unsigned mulhwu_scale_factor(unsigned, unsigned);
+#endif /* __ASM_TIME_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/timex.h b/include/asm-ppc/timex.h
new file mode 100644
index 0000000..cffc871
--- /dev/null
+++ b/include/asm-ppc/timex.h
@@ -0,0 +1,40 @@
+/*
+ * include/asm-ppc/timex.h
+ *
+ * ppc architecture timex specifications
+ */
+#ifdef __KERNEL__
+#ifndef _ASMppc_TIMEX_H
+#define _ASMppc_TIMEX_H
+
+#include <linux/config.h>
+#include <asm/cputable.h>
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+/*
+ * For the "cycle" counter we use the timebase lower half.
+ * Currently only used on SMP.
+ */
+
+static inline cycles_t get_cycles(void)
+{
+ cycles_t ret = 0;
+
+ __asm__ __volatile__(
+ "98: mftb %0\n"
+ "99:\n"
+ ".section __ftr_fixup,\"a\"\n"
+ " .long %1\n"
+ " .long 0\n"
+ " .long 98b\n"
+ " .long 99b\n"
+ ".previous"
+ : "=r" (ret) : "i" (CPU_FTR_601));
+ return ret;
+}
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/tlb.h b/include/asm-ppc/tlb.h
new file mode 100644
index 0000000..2c142c5
--- /dev/null
+++ b/include/asm-ppc/tlb.h
@@ -0,0 +1,57 @@
+/*
+ * TLB shootdown specifics for PPC
+ *
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _PPC_TLB_H
+#define _PPC_TLB_H
+
+#include <linux/config.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_PPC_STD_MMU
+/* Classic PPC with hash-table based MMU... */
+
+struct mmu_gather;
+extern void tlb_flush(struct mmu_gather *tlb);
+
+/* Get the generic bits... */
+#include <asm-generic/tlb.h>
+
+/* Nothing needed here in fact... */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+
+extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
+ unsigned long address);
+
+static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
+ unsigned long address)
+{
+ if (pte_val(*ptep) & _PAGE_HASHPTE)
+ flush_hash_entry(tlb->mm, ptep, address);
+}
+
+#else
+/* Embedded PPC with software-loaded TLB, very simple... */
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+/* Get the generic bits... */
+#include <asm-generic/tlb.h>
+
+#endif /* CONFIG_PPC_STD_MMU */
+
+#endif /* __PPC_TLB_H */
diff --git a/include/asm-ppc/tlbflush.h b/include/asm-ppc/tlbflush.h
new file mode 100644
index 0000000..9850f53
--- /dev/null
+++ b/include/asm-ppc/tlbflush.h
@@ -0,0 +1,115 @@
+/*
+ * include/asm-ppc/tlbflush.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_TLBFLUSH_H
+#define _PPC_TLBFLUSH_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+#if defined(CONFIG_4xx)
+
+#ifndef CONFIG_44x
+#define __tlbia() asm volatile ("sync; tlbia; isync" : : : "memory")
+#else
+#define __tlbia _tlbia
+#endif
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+ { __tlbia(); }
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+ { _tlbie(vmaddr); }
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+ { _tlbie(vmaddr); }
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+ { __tlbia(); }
+static inline void flush_tlb_kernel_range(unsigned long start,
+ unsigned long end)
+ { __tlbia(); }
+
+#elif defined(CONFIG_FSL_BOOKE)
+
+/* TODO: determine if flush_tlb_range & flush_tlb_kernel_range
+ * are best implemented as tlbia vs specific tlbie's */
+
+#define __tlbia() _tlbia()
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+ { __tlbia(); }
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+ { _tlbie(vmaddr); }
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+ { _tlbie(vmaddr); }
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+ { __tlbia(); }
+static inline void flush_tlb_kernel_range(unsigned long start,
+ unsigned long end)
+ { __tlbia(); }
+
+#elif defined(CONFIG_8xx)
+#define __tlbia() asm volatile ("tlbia; sync" : : : "memory")
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+ { __tlbia(); }
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+ { _tlbie(vmaddr); }
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+ { _tlbie(vmaddr); }
+static inline void flush_tlb_range(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+ { __tlbia(); }
+static inline void flush_tlb_kernel_range(unsigned long start,
+ unsigned long end)
+ { __tlbia(); }
+
+#else /* 6xx, 7xx, 7xxx cpus */
+struct mm_struct;
+struct vm_area_struct;
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+#endif
+
+/*
+ * This is called in munmap when we have freed up some page-table
+ * pages. We don't need to do anything here, there's nothing special
+ * about our page-table pages. -- paulus
+ */
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+}
+
+/*
+ * This gets called at the end of handling a page fault, when
+ * the kernel has put a new PTE into the page table for the process.
+ * We use it to ensure coherency between the i-cache and d-cache
+ * for the page which has just been mapped in.
+ * On machines which use an MMU hash table, we use this to put a
+ * corresponding HPTE into the hash table ahead of time, instead of
+ * waiting for the inevitable extra hash-table miss exception.
+ */
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+#endif /* _PPC_TLBFLUSH_H */
+#endif /*__KERNEL__ */
diff --git a/include/asm-ppc/todc.h b/include/asm-ppc/todc.h
new file mode 100644
index 0000000..84bae7d
--- /dev/null
+++ b/include/asm-ppc/todc.h
@@ -0,0 +1,490 @@
+/*
+ * include/asm-ppc/todc.h
+ *
+ * Definitions for the M48Txx and mc146818 series of Time of day/Real Time
+ * Clock chips.
+ *
+ * Author: Mark A. Greer
+ * mgreer@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips.
+ * Purpose is to make one generic file that handles all of these chips instead
+ * of every platform implementing the same code over & over again.
+ */
+
+#ifndef __PPC_KERNEL_TODC_H
+#define __PPC_KERNEL_TODC_H
+
+typedef struct {
+ uint rtc_type; /* your particular chip */
+
+ /*
+ * Following are the addresses of the AS0, AS1, and DATA registers
+ * of these chips. Note that these are board-specific.
+ */
+ unsigned int nvram_as0;
+ unsigned int nvram_as1;
+ unsigned int nvram_data;
+
+ /*
+ * Define bits to stop external set of regs from changing so
+ * the chip can be read/written reliably.
+ */
+ unsigned char enable_read;
+ unsigned char enable_write;
+
+ /*
+ * Following is the number of AS0 address bits. This is normally
+ * 8 but some bad hardware routes address lines incorrectly.
+ */
+ int as0_bits;
+
+ int nvram_size; /* Size of NVRAM on chip */
+ int sw_flags; /* Software control flags */
+
+ /* Following are the register offsets for the particular chip */
+ int year;
+ int month;
+ int day_of_month;
+ int day_of_week;
+ int hours;
+ int minutes;
+ int seconds;
+ int control_b;
+ int control_a;
+ int watchdog;
+ int interrupts;
+ int alarm_date;
+ int alarm_hour;
+ int alarm_minutes;
+ int alarm_seconds;
+ int century;
+ int flags;
+
+ /*
+ * Some RTC chips have their NVRAM buried behind a addr/data pair of
+ * regs on the first level/clock registers. The following fields
+ * are the addresses for those addr/data regs.
+ */
+ int nvram_addr_reg;
+ int nvram_data_reg;
+} todc_info_t;
+
+/*
+ * Define the types of TODC/RTC variants that are supported in
+ * arch/ppc/kernel/todc_time.c
+ * Make a new one of these for any chip somehow differs from what's already
+ * defined. That way, if you ever need to put in code to touch those
+ * bits/registers in todc_time.c, you can put it inside an
+ * 'if (todc_info->rtc_type == TODC_TYPE_XXX)' so you won't break
+ * anyone else.
+ */
+#define TODC_TYPE_MK48T35 1
+#define TODC_TYPE_MK48T37 2
+#define TODC_TYPE_MK48T59 3
+#define TODC_TYPE_DS1693 4 /* Dallas DS1693 RTC */
+#define TODC_TYPE_DS1743 5 /* Dallas DS1743 RTC */
+#define TODC_TYPE_DS1746 6 /* Dallas DS1746 RTC */
+#define TODC_TYPE_DS1747 7 /* Dallas DS1747 RTC */
+#define TODC_TYPE_DS1501 8 /* Dallas DS1501 RTC */
+#define TODC_TYPE_DS1643 9 /* Dallas DS1643 RTC */
+#define TODC_TYPE_PC97307 10 /* PC97307 internal RTC */
+#define TODC_TYPE_DS1557 11 /* Dallas DS1557 RTC */
+#define TODC_TYPE_DS17285 12 /* Dallas DS17285 RTC */
+#define TODC_TYPE_DS1553 13 /* Dallas DS1553 RTC */
+#define TODC_TYPE_MC146818 100 /* Leave room for m48txx's */
+
+/*
+ * Bit to clear/set to enable reads/writes to the chip
+ */
+#define TODC_MK48TXX_CNTL_A_R 0x40
+#define TODC_MK48TXX_CNTL_A_W 0x80
+#define TODC_MK48TXX_DAY_CB 0x80
+
+#define TODC_DS1501_CNTL_B_TE 0x80
+
+/*
+ * Define flag bits used by todc routines.
+ */
+#define TODC_FLAG_2_LEVEL_NVRAM 0x00000001
+
+/*
+ * Define the values for the various RTC's that should to into the todc_info
+ * table.
+ * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only
+ * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set.
+ */
+#define TODC_TYPE_MK48T35_NVRAM_SIZE 0x7ff8
+#define TODC_TYPE_MK48T35_SW_FLAGS 0
+#define TODC_TYPE_MK48T35_YEAR 0x7fff
+#define TODC_TYPE_MK48T35_MONTH 0x7ffe
+#define TODC_TYPE_MK48T35_DOM 0x7ffd /* Day of Month */
+#define TODC_TYPE_MK48T35_DOW 0x7ffc /* Day of Week */
+#define TODC_TYPE_MK48T35_HOURS 0x7ffb
+#define TODC_TYPE_MK48T35_MINUTES 0x7ffa
+#define TODC_TYPE_MK48T35_SECONDS 0x7ff9
+#define TODC_TYPE_MK48T35_CNTL_B 0x7ff9
+#define TODC_TYPE_MK48T35_CNTL_A 0x7ff8
+#define TODC_TYPE_MK48T35_WATCHDOG 0x0000
+#define TODC_TYPE_MK48T35_INTERRUPTS 0x0000
+#define TODC_TYPE_MK48T35_ALARM_DATE 0x0000
+#define TODC_TYPE_MK48T35_ALARM_HOUR 0x0000
+#define TODC_TYPE_MK48T35_ALARM_MINUTES 0x0000
+#define TODC_TYPE_MK48T35_ALARM_SECONDS 0x0000
+#define TODC_TYPE_MK48T35_CENTURY 0x0000
+#define TODC_TYPE_MK48T35_FLAGS 0x0000
+#define TODC_TYPE_MK48T35_NVRAM_ADDR_REG 0
+#define TODC_TYPE_MK48T35_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_MK48T37_NVRAM_SIZE 0x7ff0
+#define TODC_TYPE_MK48T37_SW_FLAGS 0
+#define TODC_TYPE_MK48T37_YEAR 0x7fff
+#define TODC_TYPE_MK48T37_MONTH 0x7ffe
+#define TODC_TYPE_MK48T37_DOM 0x7ffd /* Day of Month */
+#define TODC_TYPE_MK48T37_DOW 0x7ffc /* Day of Week */
+#define TODC_TYPE_MK48T37_HOURS 0x7ffb
+#define TODC_TYPE_MK48T37_MINUTES 0x7ffa
+#define TODC_TYPE_MK48T37_SECONDS 0x7ff9
+#define TODC_TYPE_MK48T37_CNTL_B 0x7ff9
+#define TODC_TYPE_MK48T37_CNTL_A 0x7ff8
+#define TODC_TYPE_MK48T37_WATCHDOG 0x7ff7
+#define TODC_TYPE_MK48T37_INTERRUPTS 0x7ff6
+#define TODC_TYPE_MK48T37_ALARM_DATE 0x7ff5
+#define TODC_TYPE_MK48T37_ALARM_HOUR 0x7ff4
+#define TODC_TYPE_MK48T37_ALARM_MINUTES 0x7ff3
+#define TODC_TYPE_MK48T37_ALARM_SECONDS 0x7ff2
+#define TODC_TYPE_MK48T37_CENTURY 0x7ff1
+#define TODC_TYPE_MK48T37_FLAGS 0x7ff0
+#define TODC_TYPE_MK48T37_NVRAM_ADDR_REG 0
+#define TODC_TYPE_MK48T37_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_MK48T59_NVRAM_SIZE 0x1ff0
+#define TODC_TYPE_MK48T59_SW_FLAGS 0
+#define TODC_TYPE_MK48T59_YEAR 0x1fff
+#define TODC_TYPE_MK48T59_MONTH 0x1ffe
+#define TODC_TYPE_MK48T59_DOM 0x1ffd /* Day of Month */
+#define TODC_TYPE_MK48T59_DOW 0x1ffc /* Day of Week */
+#define TODC_TYPE_MK48T59_HOURS 0x1ffb
+#define TODC_TYPE_MK48T59_MINUTES 0x1ffa
+#define TODC_TYPE_MK48T59_SECONDS 0x1ff9
+#define TODC_TYPE_MK48T59_CNTL_B 0x1ff9
+#define TODC_TYPE_MK48T59_CNTL_A 0x1ff8
+#define TODC_TYPE_MK48T59_WATCHDOG 0x1fff
+#define TODC_TYPE_MK48T59_INTERRUPTS 0x1fff
+#define TODC_TYPE_MK48T59_ALARM_DATE 0x1fff
+#define TODC_TYPE_MK48T59_ALARM_HOUR 0x1fff
+#define TODC_TYPE_MK48T59_ALARM_MINUTES 0x1fff
+#define TODC_TYPE_MK48T59_ALARM_SECONDS 0x1fff
+#define TODC_TYPE_MK48T59_CENTURY 0x1fff
+#define TODC_TYPE_MK48T59_FLAGS 0x1fff
+#define TODC_TYPE_MK48T59_NVRAM_ADDR_REG 0
+#define TODC_TYPE_MK48T59_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1501_NVRAM_SIZE 0x100
+#define TODC_TYPE_DS1501_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM
+#define TODC_TYPE_DS1501_YEAR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x06)
+#define TODC_TYPE_DS1501_MONTH (TODC_TYPE_DS1501_NVRAM_SIZE + 0x05)
+#define TODC_TYPE_DS1501_DOM (TODC_TYPE_DS1501_NVRAM_SIZE + 0x04)
+#define TODC_TYPE_DS1501_DOW (TODC_TYPE_DS1501_NVRAM_SIZE + 0x03)
+#define TODC_TYPE_DS1501_HOURS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x02)
+#define TODC_TYPE_DS1501_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x01)
+#define TODC_TYPE_DS1501_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x00)
+#define TODC_TYPE_DS1501_CNTL_B (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
+#define TODC_TYPE_DS1501_CNTL_A (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
+#define TODC_TYPE_DS1501_WATCHDOG (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
+#define TODC_TYPE_DS1501_INTERRUPTS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
+#define TODC_TYPE_DS1501_ALARM_DATE (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b)
+#define TODC_TYPE_DS1501_ALARM_HOUR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a)
+#define TODC_TYPE_DS1501_ALARM_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x09)
+#define TODC_TYPE_DS1501_ALARM_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x08)
+#define TODC_TYPE_DS1501_CENTURY (TODC_TYPE_DS1501_NVRAM_SIZE + 0x07)
+#define TODC_TYPE_DS1501_FLAGS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
+#define TODC_TYPE_DS1501_NVRAM_ADDR_REG 0x10
+#define TODC_TYPE_DS1501_NVRAM_DATA_REG 0x13
+
+#define TODC_TYPE_DS1553_NVRAM_SIZE 0x1ff0
+#define TODC_TYPE_DS1553_SW_FLAGS 0
+#define TODC_TYPE_DS1553_YEAR 0x1fff
+#define TODC_TYPE_DS1553_MONTH 0x1ffe
+#define TODC_TYPE_DS1553_DOM 0x1ffd /* Day of Month */
+#define TODC_TYPE_DS1553_DOW 0x1ffc /* Day of Week */
+#define TODC_TYPE_DS1553_HOURS 0x1ffb
+#define TODC_TYPE_DS1553_MINUTES 0x1ffa
+#define TODC_TYPE_DS1553_SECONDS 0x1ff9
+#define TODC_TYPE_DS1553_CNTL_B 0x1ff9
+#define TODC_TYPE_DS1553_CNTL_A 0x1ff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1553_WATCHDOG 0x1ff7
+#define TODC_TYPE_DS1553_INTERRUPTS 0x1ff6
+#define TODC_TYPE_DS1553_ALARM_DATE 0x1ff5
+#define TODC_TYPE_DS1553_ALARM_HOUR 0x1ff4
+#define TODC_TYPE_DS1553_ALARM_MINUTES 0x1ff3
+#define TODC_TYPE_DS1553_ALARM_SECONDS 0x1ff2
+#define TODC_TYPE_DS1553_CENTURY 0x1ff8
+#define TODC_TYPE_DS1553_FLAGS 0x1ff0
+#define TODC_TYPE_DS1553_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1553_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1557_NVRAM_SIZE 0x7fff0
+#define TODC_TYPE_DS1557_SW_FLAGS 0
+#define TODC_TYPE_DS1557_YEAR 0x7ffff
+#define TODC_TYPE_DS1557_MONTH 0x7fffe
+#define TODC_TYPE_DS1557_DOM 0x7fffd /* Day of Month */
+#define TODC_TYPE_DS1557_DOW 0x7fffc /* Day of Week */
+#define TODC_TYPE_DS1557_HOURS 0x7fffb
+#define TODC_TYPE_DS1557_MINUTES 0x7fffa
+#define TODC_TYPE_DS1557_SECONDS 0x7fff9
+#define TODC_TYPE_DS1557_CNTL_B 0x7fff9
+#define TODC_TYPE_DS1557_CNTL_A 0x7fff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1557_WATCHDOG 0x7fff7
+#define TODC_TYPE_DS1557_INTERRUPTS 0x7fff6
+#define TODC_TYPE_DS1557_ALARM_DATE 0x7fff5
+#define TODC_TYPE_DS1557_ALARM_HOUR 0x7fff4
+#define TODC_TYPE_DS1557_ALARM_MINUTES 0x7fff3
+#define TODC_TYPE_DS1557_ALARM_SECONDS 0x7fff2
+#define TODC_TYPE_DS1557_CENTURY 0x7fff8
+#define TODC_TYPE_DS1557_FLAGS 0x7fff0
+#define TODC_TYPE_DS1557_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1557_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1643_NVRAM_SIZE 0x1ff8
+#define TODC_TYPE_DS1643_SW_FLAGS 0
+#define TODC_TYPE_DS1643_YEAR 0x1fff
+#define TODC_TYPE_DS1643_MONTH 0x1ffe
+#define TODC_TYPE_DS1643_DOM 0x1ffd /* Day of Month */
+#define TODC_TYPE_DS1643_DOW 0x1ffc /* Day of Week */
+#define TODC_TYPE_DS1643_HOURS 0x1ffb
+#define TODC_TYPE_DS1643_MINUTES 0x1ffa
+#define TODC_TYPE_DS1643_SECONDS 0x1ff9
+#define TODC_TYPE_DS1643_CNTL_B 0x1ff9
+#define TODC_TYPE_DS1643_CNTL_A 0x1ff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1643_WATCHDOG 0x1fff
+#define TODC_TYPE_DS1643_INTERRUPTS 0x1fff
+#define TODC_TYPE_DS1643_ALARM_DATE 0x1fff
+#define TODC_TYPE_DS1643_ALARM_HOUR 0x1fff
+#define TODC_TYPE_DS1643_ALARM_MINUTES 0x1fff
+#define TODC_TYPE_DS1643_ALARM_SECONDS 0x1fff
+#define TODC_TYPE_DS1643_CENTURY 0x1ff8
+#define TODC_TYPE_DS1643_FLAGS 0x1fff
+#define TODC_TYPE_DS1643_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1643_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1693_NVRAM_SIZE 0 /* Not handled yet */
+#define TODC_TYPE_DS1693_SW_FLAGS 0
+#define TODC_TYPE_DS1693_YEAR 0x09
+#define TODC_TYPE_DS1693_MONTH 0x08
+#define TODC_TYPE_DS1693_DOM 0x07 /* Day of Month */
+#define TODC_TYPE_DS1693_DOW 0x06 /* Day of Week */
+#define TODC_TYPE_DS1693_HOURS 0x04
+#define TODC_TYPE_DS1693_MINUTES 0x02
+#define TODC_TYPE_DS1693_SECONDS 0x00
+#define TODC_TYPE_DS1693_CNTL_B 0x0b
+#define TODC_TYPE_DS1693_CNTL_A 0x0a
+#define TODC_TYPE_DS1693_WATCHDOG 0xff
+#define TODC_TYPE_DS1693_INTERRUPTS 0xff
+#define TODC_TYPE_DS1693_ALARM_DATE 0x49
+#define TODC_TYPE_DS1693_ALARM_HOUR 0x05
+#define TODC_TYPE_DS1693_ALARM_MINUTES 0x03
+#define TODC_TYPE_DS1693_ALARM_SECONDS 0x01
+#define TODC_TYPE_DS1693_CENTURY 0x48
+#define TODC_TYPE_DS1693_FLAGS 0xff
+#define TODC_TYPE_DS1693_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1693_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1743_NVRAM_SIZE 0x1ff8
+#define TODC_TYPE_DS1743_SW_FLAGS 0
+#define TODC_TYPE_DS1743_YEAR 0x1fff
+#define TODC_TYPE_DS1743_MONTH 0x1ffe
+#define TODC_TYPE_DS1743_DOM 0x1ffd /* Day of Month */
+#define TODC_TYPE_DS1743_DOW 0x1ffc /* Day of Week */
+#define TODC_TYPE_DS1743_HOURS 0x1ffb
+#define TODC_TYPE_DS1743_MINUTES 0x1ffa
+#define TODC_TYPE_DS1743_SECONDS 0x1ff9
+#define TODC_TYPE_DS1743_CNTL_B 0x1ff9
+#define TODC_TYPE_DS1743_CNTL_A 0x1ff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1743_WATCHDOG 0x1fff
+#define TODC_TYPE_DS1743_INTERRUPTS 0x1fff
+#define TODC_TYPE_DS1743_ALARM_DATE 0x1fff
+#define TODC_TYPE_DS1743_ALARM_HOUR 0x1fff
+#define TODC_TYPE_DS1743_ALARM_MINUTES 0x1fff
+#define TODC_TYPE_DS1743_ALARM_SECONDS 0x1fff
+#define TODC_TYPE_DS1743_CENTURY 0x1ff8
+#define TODC_TYPE_DS1743_FLAGS 0x1fff
+#define TODC_TYPE_DS1743_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1743_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1746_NVRAM_SIZE 0x1fff8
+#define TODC_TYPE_DS1746_SW_FLAGS 0
+#define TODC_TYPE_DS1746_YEAR 0x1ffff
+#define TODC_TYPE_DS1746_MONTH 0x1fffe
+#define TODC_TYPE_DS1746_DOM 0x1fffd /* Day of Month */
+#define TODC_TYPE_DS1746_DOW 0x1fffc /* Day of Week */
+#define TODC_TYPE_DS1746_HOURS 0x1fffb
+#define TODC_TYPE_DS1746_MINUTES 0x1fffa
+#define TODC_TYPE_DS1746_SECONDS 0x1fff9
+#define TODC_TYPE_DS1746_CNTL_B 0x1fff9
+#define TODC_TYPE_DS1746_CNTL_A 0x1fff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1746_WATCHDOG 0x00000
+#define TODC_TYPE_DS1746_INTERRUPTS 0x00000
+#define TODC_TYPE_DS1746_ALARM_DATE 0x00000
+#define TODC_TYPE_DS1746_ALARM_HOUR 0x00000
+#define TODC_TYPE_DS1746_ALARM_MINUTES 0x00000
+#define TODC_TYPE_DS1746_ALARM_SECONDS 0x00000
+#define TODC_TYPE_DS1746_CENTURY 0x00000
+#define TODC_TYPE_DS1746_FLAGS 0x00000
+#define TODC_TYPE_DS1746_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1746_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS1747_NVRAM_SIZE 0x7fff8
+#define TODC_TYPE_DS1747_SW_FLAGS 0
+#define TODC_TYPE_DS1747_YEAR 0x7ffff
+#define TODC_TYPE_DS1747_MONTH 0x7fffe
+#define TODC_TYPE_DS1747_DOM 0x7fffd /* Day of Month */
+#define TODC_TYPE_DS1747_DOW 0x7fffc /* Day of Week */
+#define TODC_TYPE_DS1747_HOURS 0x7fffb
+#define TODC_TYPE_DS1747_MINUTES 0x7fffa
+#define TODC_TYPE_DS1747_SECONDS 0x7fff9
+#define TODC_TYPE_DS1747_CNTL_B 0x7fff9
+#define TODC_TYPE_DS1747_CNTL_A 0x7fff8 /* control_a R/W regs */
+#define TODC_TYPE_DS1747_WATCHDOG 0x00000
+#define TODC_TYPE_DS1747_INTERRUPTS 0x00000
+#define TODC_TYPE_DS1747_ALARM_DATE 0x00000
+#define TODC_TYPE_DS1747_ALARM_HOUR 0x00000
+#define TODC_TYPE_DS1747_ALARM_MINUTES 0x00000
+#define TODC_TYPE_DS1747_ALARM_SECONDS 0x00000
+#define TODC_TYPE_DS1747_CENTURY 0x00000
+#define TODC_TYPE_DS1747_FLAGS 0x00000
+#define TODC_TYPE_DS1747_NVRAM_ADDR_REG 0
+#define TODC_TYPE_DS1747_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_DS17285_NVRAM_SIZE (0x1000-0x80) /* 4Kx8 NVRAM (minus RTC regs) */
+#define TODC_TYPE_DS17285_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM
+#define TODC_TYPE_DS17285_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x00)
+#define TODC_TYPE_DS17285_ALARM_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x01)
+#define TODC_TYPE_DS17285_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x02)
+#define TODC_TYPE_DS17285_ALARM_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x03)
+#define TODC_TYPE_DS17285_HOURS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x04)
+#define TODC_TYPE_DS17285_ALARM_HOUR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x05)
+#define TODC_TYPE_DS17285_DOW (TODC_TYPE_DS17285_NVRAM_SIZE + 0x06)
+#define TODC_TYPE_DS17285_DOM (TODC_TYPE_DS17285_NVRAM_SIZE + 0x07)
+#define TODC_TYPE_DS17285_MONTH (TODC_TYPE_DS17285_NVRAM_SIZE + 0x08)
+#define TODC_TYPE_DS17285_YEAR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x09)
+#define TODC_TYPE_DS17285_CNTL_A (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A)
+#define TODC_TYPE_DS17285_CNTL_B (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B)
+#define TODC_TYPE_DS17285_CNTL_C (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C)
+#define TODC_TYPE_DS17285_CNTL_D (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D)
+#define TODC_TYPE_DS17285_WATCHDOG 0
+#define TODC_TYPE_DS17285_INTERRUPTS 0
+#define TODC_TYPE_DS17285_ALARM_DATE 0
+#define TODC_TYPE_DS17285_CENTURY 0
+#define TODC_TYPE_DS17285_FLAGS 0
+#define TODC_TYPE_DS17285_NVRAM_ADDR_REG 0x50
+#define TODC_TYPE_DS17285_NVRAM_DATA_REG 0x53
+
+#define TODC_TYPE_MC146818_NVRAM_SIZE 0 /* XXXX */
+#define TODC_TYPE_MC146818_SW_FLAGS 0
+#define TODC_TYPE_MC146818_YEAR 0x09
+#define TODC_TYPE_MC146818_MONTH 0x08
+#define TODC_TYPE_MC146818_DOM 0x07 /* Day of Month */
+#define TODC_TYPE_MC146818_DOW 0x06 /* Day of Week */
+#define TODC_TYPE_MC146818_HOURS 0x04
+#define TODC_TYPE_MC146818_MINUTES 0x02
+#define TODC_TYPE_MC146818_SECONDS 0x00
+#define TODC_TYPE_MC146818_CNTL_B 0x0a
+#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */
+#define TODC_TYPE_MC146818_WATCHDOG 0
+#define TODC_TYPE_MC146818_INTERRUPTS 0x0c
+#define TODC_TYPE_MC146818_ALARM_DATE 0xff
+#define TODC_TYPE_MC146818_ALARM_HOUR 0x05
+#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03
+#define TODC_TYPE_MC146818_ALARM_SECONDS 0x01
+#define TODC_TYPE_MC146818_CENTURY 0xff
+#define TODC_TYPE_MC146818_FLAGS 0xff
+#define TODC_TYPE_MC146818_NVRAM_ADDR_REG 0
+#define TODC_TYPE_MC146818_NVRAM_DATA_REG 0
+
+#define TODC_TYPE_PC97307_NVRAM_SIZE 0 /* No NVRAM? */
+#define TODC_TYPE_PC97307_SW_FLAGS 0
+#define TODC_TYPE_PC97307_YEAR 0x09
+#define TODC_TYPE_PC97307_MONTH 0x08
+#define TODC_TYPE_PC97307_DOM 0x07 /* Day of Month */
+#define TODC_TYPE_PC97307_DOW 0x06 /* Day of Week */
+#define TODC_TYPE_PC97307_HOURS 0x04
+#define TODC_TYPE_PC97307_MINUTES 0x02
+#define TODC_TYPE_PC97307_SECONDS 0x00
+#define TODC_TYPE_PC97307_CNTL_B 0x0a
+#define TODC_TYPE_PC97307_CNTL_A 0x0b /* control_a R/W regs */
+#define TODC_TYPE_PC97307_WATCHDOG 0x0c
+#define TODC_TYPE_PC97307_INTERRUPTS 0x0d
+#define TODC_TYPE_PC97307_ALARM_DATE 0xff
+#define TODC_TYPE_PC97307_ALARM_HOUR 0x05
+#define TODC_TYPE_PC97307_ALARM_MINUTES 0x03
+#define TODC_TYPE_PC97307_ALARM_SECONDS 0x01
+#define TODC_TYPE_PC97307_CENTURY 0xff
+#define TODC_TYPE_PC97307_FLAGS 0xff
+#define TODC_TYPE_PC97307_NVRAM_ADDR_REG 0
+#define TODC_TYPE_PC97307_NVRAM_DATA_REG 0
+
+/*
+ * Define macros to allocate and init the todc_info_t table that will
+ * be used by the todc_time.c routines.
+ */
+#define TODC_ALLOC() \
+ static todc_info_t todc_info_alloc; \
+ todc_info_t *todc_info = &todc_info_alloc;
+
+#define TODC_INIT(clock_type, as0, as1, data, bits) { \
+ todc_info->rtc_type = clock_type; \
+ \
+ todc_info->nvram_as0 = (unsigned int)(as0); \
+ todc_info->nvram_as1 = (unsigned int)(as1); \
+ todc_info->nvram_data = (unsigned int)(data); \
+ \
+ todc_info->as0_bits = (bits); \
+ \
+ todc_info->nvram_size = clock_type ##_NVRAM_SIZE; \
+ todc_info->sw_flags = clock_type ##_SW_FLAGS; \
+ \
+ todc_info->year = clock_type ##_YEAR; \
+ todc_info->month = clock_type ##_MONTH; \
+ todc_info->day_of_month = clock_type ##_DOM; \
+ todc_info->day_of_week = clock_type ##_DOW; \
+ todc_info->hours = clock_type ##_HOURS; \
+ todc_info->minutes = clock_type ##_MINUTES; \
+ todc_info->seconds = clock_type ##_SECONDS; \
+ todc_info->control_b = clock_type ##_CNTL_B; \
+ todc_info->control_a = clock_type ##_CNTL_A; \
+ todc_info->watchdog = clock_type ##_WATCHDOG; \
+ todc_info->interrupts = clock_type ##_INTERRUPTS; \
+ todc_info->alarm_date = clock_type ##_ALARM_DATE; \
+ todc_info->alarm_hour = clock_type ##_ALARM_HOUR; \
+ todc_info->alarm_minutes = clock_type ##_ALARM_MINUTES; \
+ todc_info->alarm_seconds = clock_type ##_ALARM_SECONDS; \
+ todc_info->century = clock_type ##_CENTURY; \
+ todc_info->flags = clock_type ##_FLAGS; \
+ \
+ todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG; \
+ todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG; \
+}
+
+extern todc_info_t *todc_info;
+
+unsigned char todc_direct_read_val(int addr);
+void todc_direct_write_val(int addr, unsigned char val);
+unsigned char todc_m48txx_read_val(int addr);
+void todc_m48txx_write_val(int addr, unsigned char val);
+unsigned char todc_mc146818_read_val(int addr);
+void todc_mc146818_write_val(int addr, unsigned char val);
+
+long todc_time_init(void);
+unsigned long todc_get_rtc_time(void);
+int todc_set_rtc_time(unsigned long nowtime);
+void todc_calibrate_decr(void);
+
+#endif /* __PPC_KERNEL_TODC_H */
diff --git a/include/asm-ppc/topology.h b/include/asm-ppc/topology.h
new file mode 100644
index 0000000..6a029bb
--- /dev/null
+++ b/include/asm-ppc/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_PPC_TOPOLOGY_H
+#define _ASM_PPC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_PPC_TOPOLOGY_H */
diff --git a/include/asm-ppc/traps.h b/include/asm-ppc/traps.h
new file mode 100644
index 0000000..68e7326
--- /dev/null
+++ b/include/asm-ppc/traps.h
@@ -0,0 +1 @@
+#include <asm-m68k/traps.h>
diff --git a/include/asm-ppc/types.h b/include/asm-ppc/types.h
new file mode 100644
index 0000000..a787bc0
--- /dev/null
+++ b/include/asm-ppc/types.h
@@ -0,0 +1,71 @@
+#ifndef _PPC_TYPES_H
+#define _PPC_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+typedef struct {
+ __u32 u[4];
+} __vector128;
+
+/*
+ * XXX allowed outside of __KERNEL__ for now, until glibc gets
+ * a proper set of asm headers of its own. -- paulus
+ */
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+typedef __vector128 vector128;
+
+/* DMA addresses are 32-bits wide */
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#ifdef CONFIG_LBD
+typedef u64 sector_t;
+#define HAVE_SECTOR_T
+#endif
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-ppc/uaccess.h b/include/asm-ppc/uaccess.h
new file mode 100644
index 0000000..b044ae0
--- /dev/null
+++ b/include/asm-ppc/uaccess.h
@@ -0,0 +1,400 @@
+#ifdef __KERNEL__
+#ifndef _PPC_UACCESS_H
+#define _PPC_UACCESS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/processor.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * The fs/ds values are now the highest legal address in the "segment".
+ * This simplifies the checking in the routines below.
+ */
+
+#define KERNEL_DS ((mm_segment_t) { ~0UL })
+#define USER_DS ((mm_segment_t) { TASK_SIZE - 1 })
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current->thread.fs)
+#define set_fs(val) (current->thread.fs = (val))
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#define __access_ok(addr,size) \
+ ((addr) <= current->thread.fs.seg \
+ && ((size) == 0 || (size) - 1 <= current->thread.fs.seg - (addr)))
+
+#define access_ok(type, addr, size) \
+ (__chk_user_ptr(addr),__access_ok((unsigned long)(addr),(size)))
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
+{
+ return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on the
+ * PowerPC, we can just do these as direct assignments. (Of course, the
+ * exception handling means that it's no longer "just"...)
+ *
+ * The "user64" versions of the user access functions are versions that
+ * allow access of 64-bit data. The "get_user" functions do not
+ * properly handle 64-bit data because the value gets down cast to a long.
+ * The "put_user" functions already handle 64-bit data properly but we add
+ * "user64" versions for completeness
+ */
+#define get_user(x,ptr) \
+ __get_user_check((x),(ptr),sizeof(*(ptr)))
+#define get_user64(x,ptr) \
+ __get_user64_check((x),(ptr),sizeof(*(ptr)))
+#define put_user(x,ptr) \
+ __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define put_user64(x,ptr) put_user(x,ptr)
+
+#define __get_user(x,ptr) \
+ __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __get_user64(x,ptr) \
+ __get_user64_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __put_user(x,ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __put_user64(x,ptr) __put_user(x,ptr)
+
+extern long __put_user_bad(void);
+
+#define __put_user_nocheck(x,ptr,size) \
+({ \
+ long __pu_err; \
+ __chk_user_ptr(ptr); \
+ __put_user_size((x),(ptr),(size),__pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_check(x,ptr,size) \
+({ \
+ long __pu_err = -EFAULT; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ if (access_ok(VERIFY_WRITE,__pu_addr,size)) \
+ __put_user_size((x),__pu_addr,(size),__pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: \
+ __put_user_asm(x, ptr, retval, "stb"); \
+ break; \
+ case 2: \
+ __put_user_asm(x, ptr, retval, "sth"); \
+ break; \
+ case 4: \
+ __put_user_asm(x, ptr, retval, "stw"); \
+ break; \
+ case 8: \
+ __put_user_asm2(x, ptr, retval); \
+ break; \
+ default: \
+ __put_user_bad(); \
+ } \
+} while (0)
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, op) \
+ __asm__ __volatile__( \
+ "1: "op" %1,0(%2)\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,%3\n" \
+ " b 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : "=r" (err) \
+ : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+
+#define __put_user_asm2(x, addr, err) \
+ __asm__ __volatile__( \
+ "1: stw %1,0(%2)\n" \
+ "2: stw %1+1,4(%2)\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "4: li %0,%3\n" \
+ " b 3b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,4b\n" \
+ " .long 2b,4b\n" \
+ ".previous" \
+ : "=r" (err) \
+ : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ long __gu_err; \
+ unsigned long __gu_val; \
+ __chk_user_ptr(ptr); \
+ __get_user_size(__gu_val, (ptr), (size), __gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+#define __get_user64_nocheck(x, ptr, size) \
+({ \
+ long __gu_err; \
+ long long __gu_val; \
+ __chk_user_ptr(ptr); \
+ __get_user_size64(__gu_val, (ptr), (size), __gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_check(x, ptr, size) \
+({ \
+ long __gu_err = -EFAULT; \
+ unsigned long __gu_val = 0; \
+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ if (access_ok(VERIFY_READ, __gu_addr, (size))) \
+ __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+#define __get_user64_check(x, ptr, size) \
+({ \
+ long __gu_err = -EFAULT; \
+ long long __gu_val = 0; \
+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ if (access_ok(VERIFY_READ, __gu_addr, (size))) \
+ __get_user_size64(__gu_val, __gu_addr, (size), __gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x, ptr, size, retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: \
+ __get_user_asm(x, ptr, retval, "lbz"); \
+ break; \
+ case 2: \
+ __get_user_asm(x, ptr, retval, "lhz"); \
+ break; \
+ case 4: \
+ __get_user_asm(x, ptr, retval, "lwz"); \
+ break; \
+ default: \
+ x = __get_user_bad(); \
+ } \
+} while (0)
+
+#define __get_user_size64(x, ptr, size, retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: \
+ __get_user_asm(x, ptr, retval, "lbz"); \
+ break; \
+ case 2: \
+ __get_user_asm(x, ptr, retval, "lhz"); \
+ break; \
+ case 4: \
+ __get_user_asm(x, ptr, retval, "lwz"); \
+ break; \
+ case 8: \
+ __get_user_asm2(x, ptr, retval); \
+ break; \
+ default: \
+ x = __get_user_bad(); \
+ } \
+} while (0)
+
+#define __get_user_asm(x, addr, err, op) \
+ __asm__ __volatile__( \
+ "1: "op" %1,0(%2)\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,%3\n" \
+ " li %1,0\n" \
+ " b 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : "=r"(err), "=r"(x) \
+ : "b"(addr), "i"(-EFAULT), "0"(err))
+
+#define __get_user_asm2(x, addr, err) \
+ __asm__ __volatile__( \
+ "1: lwz %1,0(%2)\n" \
+ "2: lwz %1+1,4(%2)\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "4: li %0,%3\n" \
+ " li %1,0\n" \
+ " li %1+1,0\n" \
+ " b 3b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,4b\n" \
+ " .long 2b,4b\n" \
+ ".previous" \
+ : "=r"(err), "=&r"(x) \
+ : "b"(addr), "i"(-EFAULT), "0"(err))
+
+/* more complex routines */
+
+extern int __copy_tofrom_user(void __user *to, const void __user *from,
+ unsigned long size);
+
+extern inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ unsigned long over;
+
+ if (access_ok(VERIFY_READ, from, n))
+ return __copy_tofrom_user((__force void __user *)to, from, n);
+ if ((unsigned long)from < TASK_SIZE) {
+ over = (unsigned long)from + n - TASK_SIZE;
+ return __copy_tofrom_user((__force void __user *)to, from, n - over) + over;
+ }
+ return n;
+}
+
+extern inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ unsigned long over;
+
+ if (access_ok(VERIFY_WRITE, to, n))
+ return __copy_tofrom_user(to, (__force void __user *) from, n);
+ if ((unsigned long)to < TASK_SIZE) {
+ over = (unsigned long)to + n - TASK_SIZE;
+ return __copy_tofrom_user(to, (__force void __user *) from, n - over) + over;
+ }
+ return n;
+}
+
+static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+ return __copy_tofrom_user((__force void __user *)to, from, size);
+}
+
+static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long size)
+{
+ return __copy_tofrom_user(to, (__force void __user *)from, size);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+extern unsigned long __clear_user(void __user *addr, unsigned long size);
+
+extern inline unsigned long
+clear_user(void __user *addr, unsigned long size)
+{
+ if (access_ok(VERIFY_WRITE, addr, size))
+ return __clear_user(addr, size);
+ if ((unsigned long)addr < TASK_SIZE) {
+ unsigned long over = (unsigned long)addr + size - TASK_SIZE;
+ return __clear_user(addr, size - over) + over;
+ }
+ return size;
+}
+
+extern int __strncpy_from_user(char *dst, const char __user *src, long count);
+
+extern inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+ if (access_ok(VERIFY_READ, src, 1))
+ return __strncpy_from_user(dst, src, count);
+ return -EFAULT;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 for error
+ */
+
+extern int __strnlen_user(const char __user *str, long len, unsigned long top);
+
+/*
+ * Returns the length of the string at str (including the null byte),
+ * or 0 if we hit a page we can't access,
+ * or something > len if we didn't find a null byte.
+ *
+ * The `top' parameter to __strnlen_user is to make sure that
+ * we can never overflow from the user area into kernel space.
+ */
+extern __inline__ int strnlen_user(const char __user *str, long len)
+{
+ unsigned long top = current->thread.fs.seg;
+
+ if ((unsigned long)str > top)
+ return 0;
+ return __strnlen_user(str, len, top);
+}
+
+#define strlen_user(str) strnlen_user((str), 0x7ffffffe)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _PPC_UACCESS_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ucontext.h b/include/asm-ppc/ucontext.h
new file mode 100644
index 0000000..664bc98
--- /dev/null
+++ b/include/asm-ppc/ucontext.h
@@ -0,0 +1,27 @@
+#ifndef _ASMPPC_UCONTEXT_H
+#define _ASMPPC_UCONTEXT_H
+
+#include <asm/elf.h>
+#include <asm/signal.h>
+
+struct mcontext {
+ elf_gregset_t mc_gregs;
+ elf_fpregset_t mc_fregs;
+ unsigned long mc_pad[2];
+ elf_vrregset_t mc_vregs __attribute__((__aligned__(16)));
+};
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext __user *uc_link;
+ stack_t uc_stack;
+ int uc_pad[7];
+ struct mcontext __user *uc_regs;/* points to uc_mcontext field */
+ sigset_t uc_sigmask;
+ /* glibc has 1024-bit signal masks, ours are 64-bit */
+ int uc_maskext[30];
+ int uc_pad2[3];
+ struct mcontext uc_mcontext;
+};
+
+#endif /* !_ASMPPC_UCONTEXT_H */
diff --git a/include/asm-ppc/unaligned.h b/include/asm-ppc/unaligned.h
new file mode 100644
index 0000000..45520d9
--- /dev/null
+++ b/include/asm-ppc/unaligned.h
@@ -0,0 +1,18 @@
+#ifdef __KERNEL__
+#ifndef __PPC_UNALIGNED_H
+#define __PPC_UNALIGNED_H
+
+/*
+ * The PowerPC can do unaligned accesses itself in big endian mode.
+ *
+ * The strange macros are there to make sure these can't
+ * be misused in a way that makes them not work on other
+ * architectures where unaligned accesses aren't as simple.
+ */
+
+#define get_unaligned(ptr) (*(ptr))
+
+#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/uninorth.h b/include/asm-ppc/uninorth.h
new file mode 100644
index 0000000..f737732
--- /dev/null
+++ b/include/asm-ppc/uninorth.h
@@ -0,0 +1,229 @@
+/*
+ * uninorth.h: definitions for using the "UniNorth" host bridge chip
+ * from Apple. This chip is used on "Core99" machines
+ * This also includes U2 used on more recent MacRISC2/3
+ * machines and U3 (G5)
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_UNINORTH_H__
+#define __ASM_UNINORTH_H__
+
+/*
+ * Uni-N and U3 config space reg. definitions
+ *
+ * (Little endian)
+ */
+
+/* Address ranges selection. This one should work with Bandit too */
+/* Not U3 */
+#define UNI_N_ADDR_SELECT 0x48
+#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */
+#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */
+
+/* AGP registers */
+/* Not U3 */
+#define UNI_N_CFG_GART_BASE 0x8c
+#define UNI_N_CFG_AGP_BASE 0x90
+#define UNI_N_CFG_GART_CTRL 0x94
+#define UNI_N_CFG_INTERNAL_STATUS 0x98
+#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4
+
+/* UNI_N_CFG_GART_CTRL bits definitions */
+#define UNI_N_CFG_GART_INVAL 0x00000001
+#define UNI_N_CFG_GART_ENABLE 0x00000100
+#define UNI_N_CFG_GART_2xRESET 0x00010000
+#define UNI_N_CFG_GART_DISSBADET 0x00020000
+/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
+#define U3_N_CFG_GART_SYNCMODE 0x00040000
+#define U3_N_CFG_GART_PERFRD 0x00080000
+#define U3_N_CFG_GART_B2BGNT 0x00200000
+#define U3_N_CFG_GART_FASTDDR 0x00400000
+
+/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
+ * revision 1.5 (x4 AGP) may need further changes.
+ *
+ * AGP_BASE register contains the base address of the AGP aperture on
+ * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
+ * even if decoding of this address range is enabled in the address select
+ * register. Apparently, the only supported bases are 256Mb multiples
+ * (high 4 bits of that register).
+ *
+ * GART_BASE register appear to contain the physical address of the GART
+ * in system memory in the high address bits (page aligned), and the
+ * GART size in the low order bits (number of GART pages)
+ *
+ * The GART format itself is one 32bits word per physical memory page.
+ * This word contains, in little-endian format (!!!), the physical address
+ * of the page in the high bits, and what appears to be an "enable" bit
+ * in the LSB bit (0) that must be set to 1 when the entry is valid.
+ *
+ * Obviously, the GART is not cache coherent and so any change to it
+ * must be flushed to memory (or maybe just make the GART space non
+ * cachable). AGP memory itself doens't seem to be cache coherent neither.
+ *
+ * In order to invalidate the GART (which is probably necessary to inval
+ * the bridge internal TLBs), the following sequence has to be written,
+ * in order, to the GART_CTRL register:
+ *
+ * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ * UNI_N_CFG_GART_ENABLE
+ * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
+ * UNI_N_CFG_GART_ENABLE
+ *
+ * As far as AGP "features" are concerned, it looks like fast write may
+ * not be supported but this has to be confirmed.
+ *
+ * Turning on AGP seem to require a double invalidate operation, one before
+ * setting the AGP command register, on after.
+ *
+ * Turning off AGP seems to require the following sequence: first wait
+ * for the AGP to be idle by reading the internal status register, then
+ * write in that order to the GART_CTRL register:
+ *
+ * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ * 0
+ * UNI_N_CFG_GART_2xRESET
+ * 0
+ */
+
+/*
+ * Uni-N memory mapped reg. definitions
+ *
+ * Those registers are Big-Endian !!
+ *
+ * Their meaning come from either Darwin and/or from experiments I made with
+ * the bootrom, I'm not sure about their exact meaning yet
+ *
+ */
+
+/* Version of the UniNorth chip */
+#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */
+
+#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */
+#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */
+#define UNI_N_VERSION_150 0x0011 /* 1.5 */
+#define UNI_N_VERSION_200 0x0024 /* 2.0 */
+#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */
+#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */
+#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */
+
+/* This register is used to enable/disable various clocks */
+#define UNI_N_CLOCK_CNTL 0x0020
+#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */
+#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */
+#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */
+#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */
+
+/* Power Management control */
+#define UNI_N_POWER_MGT 0x0030
+#define UNI_N_POWER_MGT_NORMAL 0x00
+#define UNI_N_POWER_MGT_IDLE2 0x01
+#define UNI_N_POWER_MGT_SLEEP 0x02
+
+/* This register is configured by Darwin depending on the UniN
+ * revision
+ */
+#define UNI_N_ARB_CTRL 0x0040
+#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15
+#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000
+#define UNI_N_ARB_CTRL_QACK_DELAY 0x30
+#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00
+
+/* This one _might_ return the CPU number of the CPU reading it;
+ * the bootROM decides whether to boot or to sleep/spinloop depending
+ * on this register beeing 0 or not
+ */
+#define UNI_N_CPU_NUMBER 0x0050
+
+/* This register appear to be read by the bootROM to decide what
+ * to do on a non-recoverable reset (powerup or wakeup)
+ */
+#define UNI_N_HWINIT_STATE 0x0070
+#define UNI_N_HWINIT_STATE_SLEEPING 0x01
+#define UNI_N_HWINIT_STATE_RUNNING 0x02
+/* This last bit appear to be used by the bootROM to know the second
+ * CPU has started and will enter it's sleep loop with IP=0
+ */
+#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000
+
+/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
+ * is in low speed mode.
+ */
+#define UNI_N_AACK_DELAY 0x0100
+#define UNI_N_AACK_DELAY_ENABLE 0x00000001
+
+/* Clock status for Intrepid */
+#define UNI_N_CLOCK_STOP_STATUS0 0x0150
+#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000
+#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000
+#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000
+#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000
+#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000
+#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000
+#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000
+#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200
+#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100
+#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080
+#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040
+#define UNI_N_CLOCK_STOPPED_USB0 0x00000020
+#define UNI_N_CLOCK_STOPPED_USB1 0x00000010
+#define UNI_N_CLOCK_STOPPED_USB2 0x00000008
+#define UNI_N_CLOCK_STOPPED_32 0x00000004
+#define UNI_N_CLOCK_STOPPED_45 0x00000002
+#define UNI_N_CLOCK_STOPPED_49 0x00000001
+
+#define UNI_N_CLOCK_STOP_STATUS1 0x0160
+#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000
+#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000
+#define UNI_N_CLOCK_STOPPED_CPU 0x00020000
+#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000
+#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000
+#define UNI_N_CLOCK_STOPPED_FW 0x00004000
+#define UNI_N_CLOCK_STOPPED_GB 0x00002000
+#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000
+#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800
+#define UNI_N_CLOCK_STOPPED_MAX 0x00000400
+#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200
+#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100
+#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080
+#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040
+#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020
+#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008
+#define UNI_N_CLOCK_STOPPED_AGP 0x00000004
+#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002
+#define UNI_N_CLOCK_STOPPED_18 0x00000001
+
+/* Intrepid registe to OF do-platform-clockspreading */
+#define UNI_N_CLOCK_SPREADING 0x190
+
+/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
+
+
+/*
+ * U3 specific registers
+ */
+
+
+/* U3 Toggle */
+#define U3_TOGGLE_REG 0x00e0
+#define U3_PMC_START_STOP 0x0001
+#define U3_MPIC_RESET 0x0002
+#define U3_MPIC_OUTPUT_ENABLE 0x0004
+
+/* U3 API PHY Config 1 */
+#define U3_API_PHY_CONFIG_1 0x23030
+
+/* U3 HyperTransport registers */
+#define U3_HT_CONFIG_BASE 0x70000
+#define U3_HT_LINK_COMMAND 0x100
+#define U3_HT_LINK_CONFIG 0x110
+#define U3_HT_LINK_FREQ 0x120
+
+#endif /* __ASM_UNINORTH_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/unistd.h b/include/asm-ppc/unistd.h
new file mode 100644
index 0000000..cc51e5c
--- /dev/null
+++ b/include/asm-ppc/unistd.h
@@ -0,0 +1,488 @@
+#ifndef _ASM_PPC_UNISTD_H_
+#define _ASM_PPC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_lchown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl 110
+#define __NR_vhangup 111
+#define __NR_idle 112
+#define __NR_vm86 113
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_modify_ldt 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_query_module 166
+#define __NR_poll 167
+#define __NR_nfsservctl 168
+#define __NR_setresgid 169
+#define __NR_getresgid 170
+#define __NR_prctl 171
+#define __NR_rt_sigreturn 172
+#define __NR_rt_sigaction 173
+#define __NR_rt_sigprocmask 174
+#define __NR_rt_sigpending 175
+#define __NR_rt_sigtimedwait 176
+#define __NR_rt_sigqueueinfo 177
+#define __NR_rt_sigsuspend 178
+#define __NR_pread64 179
+#define __NR_pwrite64 180
+#define __NR_chown 181
+#define __NR_getcwd 182
+#define __NR_capget 183
+#define __NR_capset 184
+#define __NR_sigaltstack 185
+#define __NR_sendfile 186
+#define __NR_getpmsg 187 /* some people actually want streams */
+#define __NR_putpmsg 188 /* some people actually want streams */
+#define __NR_vfork 189
+#define __NR_ugetrlimit 190 /* SuS compliant getrlimit */
+#define __NR_readahead 191
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_pciconfig_read 198
+#define __NR_pciconfig_write 199
+#define __NR_pciconfig_iobase 200
+#define __NR_multiplexer 201
+#define __NR_getdents64 202
+#define __NR_pivot_root 203
+#define __NR_fcntl64 204
+#define __NR_madvise 205
+#define __NR_mincore 206
+#define __NR_gettid 207
+#define __NR_tkill 208
+#define __NR_setxattr 209
+#define __NR_lsetxattr 210
+#define __NR_fsetxattr 211
+#define __NR_getxattr 212
+#define __NR_lgetxattr 213
+#define __NR_fgetxattr 214
+#define __NR_listxattr 215
+#define __NR_llistxattr 216
+#define __NR_flistxattr 217
+#define __NR_removexattr 218
+#define __NR_lremovexattr 219
+#define __NR_fremovexattr 220
+#define __NR_futex 221
+#define __NR_sched_setaffinity 222
+#define __NR_sched_getaffinity 223
+/* 224 currently unused */
+#define __NR_tuxcall 225
+#define __NR_sendfile64 226
+#define __NR_io_setup 227
+#define __NR_io_destroy 228
+#define __NR_io_getevents 229
+#define __NR_io_submit 230
+#define __NR_io_cancel 231
+#define __NR_set_tid_address 232
+#define __NR_fadvise64 233
+#define __NR_exit_group 234
+#define __NR_lookup_dcookie 235
+#define __NR_epoll_create 236
+#define __NR_epoll_ctl 237
+#define __NR_epoll_wait 238
+#define __NR_remap_file_pages 239
+#define __NR_timer_create 240
+#define __NR_timer_settime 241
+#define __NR_timer_gettime 242
+#define __NR_timer_getoverrun 243
+#define __NR_timer_delete 244
+#define __NR_clock_settime 245
+#define __NR_clock_gettime 246
+#define __NR_clock_getres 247
+#define __NR_clock_nanosleep 248
+#define __NR_swapcontext 249
+#define __NR_tgkill 250
+#define __NR_utimes 251
+#define __NR_statfs64 252
+#define __NR_fstatfs64 253
+#define __NR_fadvise64_64 254
+#define __NR_rtas 255
+#define __NR_sys_debug_setcontext 256
+/* Number 257 is reserved for vserver */
+/* Number 258 is reserved for new sys_remap_file_pages */
+/* Number 259 is reserved for new sys_mbind */
+/* Number 260 is reserved for new sys_get_mempolicy */
+/* Number 261 is reserved for new sys_set_mempolicy */
+#define __NR_mq_open 262
+#define __NR_mq_unlink 263
+#define __NR_mq_timedsend 264
+#define __NR_mq_timedreceive 265
+#define __NR_mq_notify 266
+#define __NR_mq_getsetattr 267
+#define __NR_kexec_load 268
+#define __NR_add_key 269
+#define __NR_request_key 270
+#define __NR_keyctl 271
+#define __NR_waitid 272
+
+#define __NR_syscalls 273
+
+#define __NR(n) #n
+
+/* On powerpc a system call basically clobbers the same registers like a
+ * function call, with the exception of LR (which is needed for the
+ * "sc; bnslr" sequence) and CR (where only CR0.SO is clobbered to signal
+ * an error return status).
+ */
+
+#define __syscall_nr(nr, type, name, args...) \
+ unsigned long __sc_ret, __sc_err; \
+ { \
+ register unsigned long __sc_0 __asm__ ("r0"); \
+ register unsigned long __sc_3 __asm__ ("r3"); \
+ register unsigned long __sc_4 __asm__ ("r4"); \
+ register unsigned long __sc_5 __asm__ ("r5"); \
+ register unsigned long __sc_6 __asm__ ("r6"); \
+ register unsigned long __sc_7 __asm__ ("r7"); \
+ register unsigned long __sc_8 __asm__ ("r8"); \
+ \
+ __sc_loadargs_##nr(name, args); \
+ __asm__ __volatile__ \
+ ("sc \n\t" \
+ "mfcr %0 " \
+ : "=&r" (__sc_0), \
+ "=&r" (__sc_3), "=&r" (__sc_4), \
+ "=&r" (__sc_5), "=&r" (__sc_6), \
+ "=&r" (__sc_7), "=&r" (__sc_8) \
+ : __sc_asm_input_##nr \
+ : "cr0", "ctr", "memory", \
+ "r9", "r10","r11", "r12"); \
+ __sc_ret = __sc_3; \
+ __sc_err = __sc_0; \
+ } \
+ if (__sc_err & 0x10000000) \
+ { \
+ errno = __sc_ret; \
+ __sc_ret = -1; \
+ } \
+ return (type) __sc_ret
+
+#define __sc_loadargs_0(name, dummy...) \
+ __sc_0 = __NR_##name
+#define __sc_loadargs_1(name, arg1) \
+ __sc_loadargs_0(name); \
+ __sc_3 = (unsigned long) (arg1)
+#define __sc_loadargs_2(name, arg1, arg2) \
+ __sc_loadargs_1(name, arg1); \
+ __sc_4 = (unsigned long) (arg2)
+#define __sc_loadargs_3(name, arg1, arg2, arg3) \
+ __sc_loadargs_2(name, arg1, arg2); \
+ __sc_5 = (unsigned long) (arg3)
+#define __sc_loadargs_4(name, arg1, arg2, arg3, arg4) \
+ __sc_loadargs_3(name, arg1, arg2, arg3); \
+ __sc_6 = (unsigned long) (arg4)
+#define __sc_loadargs_5(name, arg1, arg2, arg3, arg4, arg5) \
+ __sc_loadargs_4(name, arg1, arg2, arg3, arg4); \
+ __sc_7 = (unsigned long) (arg5)
+#define __sc_loadargs_6(name, arg1, arg2, arg3, arg4, arg5, arg6) \
+ __sc_loadargs_5(name, arg1, arg2, arg3, arg4, arg5); \
+ __sc_8 = (unsigned long) (arg6)
+
+#define __sc_asm_input_0 "0" (__sc_0)
+#define __sc_asm_input_1 __sc_asm_input_0, "1" (__sc_3)
+#define __sc_asm_input_2 __sc_asm_input_1, "2" (__sc_4)
+#define __sc_asm_input_3 __sc_asm_input_2, "3" (__sc_5)
+#define __sc_asm_input_4 __sc_asm_input_3, "4" (__sc_6)
+#define __sc_asm_input_5 __sc_asm_input_4, "5" (__sc_7)
+#define __sc_asm_input_6 __sc_asm_input_5, "6" (__sc_8)
+
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+ __syscall_nr(0, type, name); \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) \
+{ \
+ __syscall_nr(1, type, name, arg1); \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1, type2 arg2) \
+{ \
+ __syscall_nr(2, type, name, arg1, arg2); \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1, type2 arg2, type3 arg3) \
+{ \
+ __syscall_nr(3, type, name, arg1, arg2, arg3); \
+}
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
+{ \
+ __syscall_nr(4, type, name, arg1, arg2, arg3, arg4); \
+}
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \
+{ \
+ __syscall_nr(5, type, name, arg1, arg2, arg3, arg4, arg5); \
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) \
+{ \
+ __syscall_nr(6, type, name, arg1, arg2, arg3, arg4, arg5, arg6); \
+}
+
+#ifdef __KERNEL__
+
+#define __NR__exit __NR_exit
+#define NR_syscalls __NR_syscalls
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * Forking from kernel space will result in the child getting a new,
+ * empty kernel stack area. Thus the child cannot access automatic
+ * variables set in the parent unless they are in registers, and the
+ * procedure where the fork was done cannot return to its caller in
+ * the child.
+ */
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ * System call prototypes.
+ */
+extern pid_t setsid(void);
+extern int write(int fd, const char *buf, off_t count);
+extern int read(int fd, char *buf, off_t count);
+extern off_t lseek(int fd, off_t offset, int count);
+extern int dup(int fd);
+extern int execve(const char *file, char **argv, char **envp);
+extern int open(const char *file, int flag, int mode);
+extern int close(int fd);
+extern pid_t waitpid(pid_t pid, int *wait_stat, int options);
+
+unsigned long sys_mmap(unsigned long addr, size_t len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, off_t offset);
+unsigned long sys_mmap2(unsigned long addr, size_t len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff);
+struct pt_regs;
+int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
+ unsigned long a3, unsigned long a4, unsigned long a5,
+ struct pt_regs *regs);
+int sys_clone(unsigned long clone_flags, unsigned long usp,
+ int __user *parent_tidp, void __user *child_threadptr,
+ int __user *child_tidp, int p6,
+ struct pt_regs *regs);
+int sys_fork(int p1, int p2, int p3, int p4, int p5, int p6,
+ struct pt_regs *regs);
+int sys_vfork(int p1, int p2, int p3, int p4, int p5, int p6,
+ struct pt_regs *regs);
+int sys_pipe(int __user *fildes);
+int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+long sys_rt_sigaction(int sig,
+ const struct sigaction __user *act,
+ struct sigaction __user *oact,
+ size_t sigsetsize);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PPC_UNISTD_H_ */
diff --git a/include/asm-ppc/user.h b/include/asm-ppc/user.h
new file mode 100644
index 0000000..d662b21
--- /dev/null
+++ b/include/asm-ppc/user.h
@@ -0,0 +1,54 @@
+#ifdef __KERNEL__
+#ifndef _PPC_USER_H
+#define _PPC_USER_H
+
+/* Adapted from <asm-alpha/user.h> */
+
+#include <linux/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core). The file contents
+ * are as follows:
+ *
+ * upage: 1 page consisting of a user struct that tells gdb
+ * what is present in the file. Directly after this is a
+ * copy of the task_struct, which is currently not used by gdb,
+ * but it may come in handy at some point. All of the registers
+ * are stored as part of the upage. The upage should always be
+ * only one page long.
+ * data: The data segment follows next. We use current->end_text to
+ * current->brk to pick up all of the user variables, plus any memory
+ * that may have been sbrk'ed. No attempt is made to determine if a
+ * page is demand-zero or if a page is totally unused, we just cover
+ * the entire range. All of the addresses are rounded in such a way
+ * that an integral number of pages is written.
+ * stack: We need the stack information in order to get a meaningful
+ * backtrace. We need to write the data from usp to
+ * current->start_stack, so we round each of these in order to be able
+ * to write an integer number of pages.
+ */
+struct user {
+ struct pt_regs regs; /* entire machine state */
+ size_t u_tsize; /* text size (pages) */
+ size_t u_dsize; /* data size (pages) */
+ size_t u_ssize; /* stack size (pages) */
+ unsigned long start_code; /* text starting address */
+ unsigned long start_data; /* data starting address */
+ unsigned long start_stack; /* stack starting address */
+ long int signal; /* signal causing core dump */
+ struct regs * u_ar0; /* help gdb find registers */
+ unsigned long magic; /* identifies a core file */
+ char u_comm[32]; /* user command name */
+};
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_DATA_START_ADDR (u.start_data)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _PPC_USER_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/vga.h b/include/asm-ppc/vga.h
new file mode 100644
index 0000000..c586473
--- /dev/null
+++ b/include/asm-ppc/vga.h
@@ -0,0 +1,46 @@
+/*
+ * Access to VGA videoram
+ *
+ * (c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifdef __KERNEL__
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/io.h>
+
+#include <linux/config.h>
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
+
+#define VT_BUF_HAVE_RW
+/*
+ * These are only needed for supporting VGA or MDA text mode, which use little
+ * endian byte ordering.
+ * In other cases, we can optimize by using native byte ordering and
+ * <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+extern inline void scr_writew(u16 val, volatile u16 *addr)
+{
+ st_le16(addr, val);
+}
+
+extern inline u16 scr_readw(volatile const u16 *addr)
+{
+ return ld_le16(addr);
+}
+
+#define VT_BUF_HAVE_MEMCPYW
+#define scr_memcpyw memcpy
+
+#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */
+
+extern unsigned long vgacon_remap_base;
+#define VGA_MAP_MEM(x) (x + vgacon_remap_base)
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/xmon.h b/include/asm-ppc/xmon.h
new file mode 100644
index 0000000..042b83e
--- /dev/null
+++ b/include/asm-ppc/xmon.h
@@ -0,0 +1,17 @@
+#ifndef __PPC_XMON_H
+#define __PPC_XMON_H
+#ifdef __KERNEL__
+
+struct pt_regs;
+
+extern void xmon(struct pt_regs *excp);
+extern void xmon_printf(const char *fmt, ...);
+extern void xmon_map_scc(void);
+extern int xmon_bpt(struct pt_regs *regs);
+extern int xmon_sstep(struct pt_regs *regs);
+extern int xmon_iabr_match(struct pt_regs *regs);
+extern int xmon_dabr_match(struct pt_regs *regs);
+extern void (*xmon_fault_handler)(struct pt_regs *regs);
+
+#endif
+#endif
diff --git a/include/asm-ppc/xor.h b/include/asm-ppc/xor.h
new file mode 100644
index 0000000..c82eb12
--- /dev/null
+++ b/include/asm-ppc/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/include/asm-ppc/xparameters.h b/include/asm-ppc/xparameters.h
new file mode 100644
index 0000000..fe4eac6
--- /dev/null
+++ b/include/asm-ppc/xparameters.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-ppc/xparameters.h
+ *
+ * This file includes the correct xparameters.h for the CONFIG'ed board
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under the terms
+ * of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_XILINX_ML300)
+#include <platforms/4xx/xparameters/xparameters_ml300.h>
+#endif
diff --git a/include/asm-ppc/zorro.h b/include/asm-ppc/zorro.h
new file mode 100644
index 0000000..1e5fbc6
--- /dev/null
+++ b/include/asm-ppc/zorro.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_PPC_ZORRO_H
+#define _ASM_PPC_ZORRO_H
+
+#include <asm/io.h>
+
+#define z_readb in_8
+#define z_readw in_be16
+#define z_readl in_be32
+
+#define z_writeb(val, port) out_8((port), (val))
+#define z_writew(val, port) out_be16((port), (val))
+#define z_writel(val, port) out_be32((port), (val))
+
+#define z_memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define z_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define z_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+
+extern void *__ioremap(unsigned long address, unsigned long size,
+ unsigned long flags);
+
+extern void *ioremap(unsigned long address, unsigned long size);
+extern void iounmap(void *addr);
+
+extern void *__ioremap(unsigned long address, unsigned long size,
+ unsigned long flags);
+
+#define z_ioremap ioremap
+#define z_iounmap iounmap
+
+#endif /* _ASM_PPC_ZORRO_H */
