Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-ia64/a.out.h b/include/asm-ia64/a.out.h
new file mode 100644
index 0000000..7293ac1
--- /dev/null
+++ b/include/asm-ia64/a.out.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_IA64_A_OUT_H
+#define _ASM_IA64_A_OUT_H
+
+/*
+ * No a.out format has been (or should be) defined so this file is
+ * just a dummy that allows us to get binfmt_elf compiled. It
+ * probably would be better to clean up binfmt_elf.c so it does not
+ * necessarily depend on there being a.out support.
+ *
+ * Modified 1998-2002
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <linux/types.h>
+
+struct exec {
+ unsigned long a_info;
+ unsigned long a_text;
+ unsigned long a_data;
+ unsigned long a_bss;
+ unsigned long a_entry;
+};
+
+#define N_TXTADDR(x) 0
+#define N_DATADDR(x) 0
+#define N_BSSADDR(x) 0
+#define N_DRSIZE(x) 0
+#define N_TRSIZE(x) 0
+#define N_SYMSIZE(x) 0
+#define N_TXTOFF(x) 0
+
+#ifdef __KERNEL__
+#include <asm/ustack.h>
+#endif
+#endif /* _ASM_IA64_A_OUT_H */
diff --git a/include/asm-ia64/acpi-ext.h b/include/asm-ia64/acpi-ext.h
new file mode 100644
index 0000000..9271d74
--- /dev/null
+++ b/include/asm-ia64/acpi-ext.h
@@ -0,0 +1,17 @@
+/*
+ * ia64/platform/hp/common/hp_acpi.h
+ *
+ * Copyright (C) 2003 Hewlett-Packard
+ * Copyright (C) Alex Williamson
+ * Copyright (C) Bjorn Helgaas
+ *
+ * Vendor specific extensions to ACPI.
+ */
+#ifndef _ASM_IA64_ACPI_EXT_H
+#define _ASM_IA64_ACPI_EXT_H
+
+#include <linux/types.h>
+
+extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length);
+
+#endif /* _ASM_IA64_ACPI_EXT_H */
diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h
new file mode 100644
index 0000000..6a26a97
--- /dev/null
+++ b/include/asm-ia64/acpi.h
@@ -0,0 +1,112 @@
+/*
+ * asm-ia64/acpi.h
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
+ * Copyright (C) 2001,2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <asm/system.h>
+
+#define COMPILER_DEPENDENT_INT64 long
+#define COMPILER_DEPENDENT_UINT64 unsigned long
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+/* Asm macros */
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS() local_irq_disable()
+#define ACPI_ENABLE_IRQS() local_irq_enable()
+#define ACPI_FLUSH_CPU_CACHE()
+
+static inline int
+ia64_acpi_acquire_global_lock (unsigned int *lock)
+{
+ unsigned int old, new, val;
+ do {
+ old = *lock;
+ new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+ val = ia64_cmpxchg4_acq(lock, new, old);
+ } while (unlikely (val != old));
+ return (new < 3) ? -1 : 0;
+}
+
+static inline int
+ia64_acpi_release_global_lock (unsigned int *lock)
+{
+ unsigned int old, new, val;
+ do {
+ old = *lock;
+ new = old & ~0x3;
+ val = ia64_cmpxchg4_acq(lock, new, old);
+ } while (unlikely (val != old));
+ return old & 0x1;
+}
+
+#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
+ ((Acq) = ia64_acpi_acquire_global_lock((unsigned int *) GLptr))
+
+#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \
+ ((Acq) = ia64_acpi_release_global_lock((unsigned int *) GLptr))
+
+#define acpi_disabled 0 /* ACPI always enabled on IA64 */
+#define acpi_noirq 0 /* ACPI always enabled on IA64 */
+#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
+#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
+static inline void disable_acpi(void) { }
+
+const char *acpi_get_sysname (void);
+int acpi_request_vector (u32 int_type);
+int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
+
+#ifdef CONFIG_ACPI_NUMA
+/* Proximity bitmap length; _PXM is at most 255 (8 bit)*/
+#define MAX_PXM_DOMAINS (256)
+extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS];
+extern int __initdata nid_to_pxm_map[MAX_NUMNODES];
+#endif
+
+extern u16 ia64_acpiid_to_sapicid[];
+
+#endif /*__KERNEL__*/
+
+#endif /*_ASM_ACPI_H*/
diff --git a/include/asm-ia64/agp.h b/include/asm-ia64/agp.h
new file mode 100644
index 0000000..d1316f1
--- /dev/null
+++ b/include/asm-ia64/agp.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_AGP_H
+#define _ASM_IA64_AGP_H
+
+/*
+ * IA-64 specific AGP definitions.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * To avoid memory-attribute aliasing issues, we require that the AGPGART engine operate
+ * in coherent mode, which lets us map the AGP memory as normal (write-back) memory
+ * (unlike x86, where it gets mapped "write-coalescing").
+ */
+#define map_page_into_agp(page) /* nothing */
+#define unmap_page_from_agp(page) /* nothing */
+#define flush_agp_mappings() /* nothing */
+#define flush_agp_cache() mb()
+
+#endif /* _ASM_IA64_AGP_H */
diff --git a/include/asm-ia64/asmmacro.h b/include/asm-ia64/asmmacro.h
new file mode 100644
index 0000000..77af457
--- /dev/null
+++ b/include/asm-ia64/asmmacro.h
@@ -0,0 +1,111 @@
+#ifndef _ASM_IA64_ASMMACRO_H
+#define _ASM_IA64_ASMMACRO_H
+
+/*
+ * Copyright (C) 2000-2001, 2003-2004 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#define ENTRY(name) \
+ .align 32; \
+ .proc name; \
+name:
+
+#define ENTRY_MIN_ALIGN(name) \
+ .align 16; \
+ .proc name; \
+name:
+
+#define GLOBAL_ENTRY(name) \
+ .global name; \
+ ENTRY(name)
+
+#define END(name) \
+ .endp name
+
+/*
+ * Helper macros to make unwind directives more readable:
+ */
+
+/* prologue_gr: */
+#define ASM_UNW_PRLG_RP 0x8
+#define ASM_UNW_PRLG_PFS 0x4
+#define ASM_UNW_PRLG_PSP 0x2
+#define ASM_UNW_PRLG_PR 0x1
+#define ASM_UNW_PRLG_GRSAVE(ninputs) (32+(ninputs))
+
+/*
+ * Helper macros for accessing user memory.
+ */
+
+ .section "__ex_table", "a" // declare section & section attributes
+ .previous
+
+# define EX(y,x...) \
+ .xdata4 "__ex_table", 99f-., y-.; \
+ [99:] x
+# define EXCLR(y,x...) \
+ .xdata4 "__ex_table", 99f-., y-.+4; \
+ [99:] x
+
+/*
+ * Mark instructions that need a load of a virtual address patched to be
+ * a load of a physical address. We use this either in critical performance
+ * path (ivt.S - TLB miss processing) or in places where it might not be
+ * safe to use a "tpa" instruction (mca_asm.S - error recovery).
+ */
+ .section ".data.patch.vtop", "a" // declare section & section attributes
+ .previous
+
+#define LOAD_PHYSICAL(pr, reg, obj) \
+[1:](pr)movl reg = obj; \
+ .xdata4 ".data.patch.vtop", 1b-.
+
+/*
+ * For now, we always put in the McKinley E9 workaround. On CPUs that don't need it,
+ * we'll patch out the work-around bundles with NOPs, so their impact is minimal.
+ */
+#define DO_MCKINLEY_E9_WORKAROUND
+
+#ifdef DO_MCKINLEY_E9_WORKAROUND
+ .section ".data.patch.mckinley_e9", "a"
+ .previous
+/* workaround for Itanium 2 Errata 9: */
+# define FSYS_RETURN \
+ .xdata4 ".data.patch.mckinley_e9", 1f-.; \
+1:{ .mib; \
+ nop.m 0; \
+ mov r16=ar.pfs; \
+ br.call.sptk.many b7=2f;; \
+ }; \
+2:{ .mib; \
+ nop.m 0; \
+ mov ar.pfs=r16; \
+ br.ret.sptk.many b6;; \
+ }
+#else
+# define FSYS_RETURN br.ret.sptk.many b6
+#endif
+
+/*
+ * Up until early 2004, use of .align within a function caused bad unwind info.
+ * TEXT_ALIGN(n) expands into ".align n" if a fixed GAS is available or into nothing
+ * otherwise.
+ */
+#ifdef HAVE_WORKING_TEXT_ALIGN
+# define TEXT_ALIGN(n) .align n
+#else
+# define TEXT_ALIGN(n)
+#endif
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define dv_serialize_data .serialize.data
+# define dv_serialize_instruction .serialize.instruction
+#else
+# define dv_serialize_data
+# define dv_serialize_instruction
+#endif
+
+#endif /* _ASM_IA64_ASMMACRO_H */
diff --git a/include/asm-ia64/atomic.h b/include/asm-ia64/atomic.h
new file mode 100644
index 0000000..874a6f8
--- /dev/null
+++ b/include/asm-ia64/atomic.h
@@ -0,0 +1,183 @@
+#ifndef _ASM_IA64_ATOMIC_H
+#define _ASM_IA64_ATOMIC_H
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ *
+ * NOTE: don't mess with the types below! The "unsigned long" and
+ * "int" types were carefully placed so as to ensure proper operation
+ * of the macros.
+ *
+ * Copyright (C) 1998, 1999, 2002-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <linux/types.h>
+
+#include <asm/intrinsics.h>
+
+/*
+ * On IA-64, counter must always be volatile to ensure that that the
+ * memory accesses are ordered.
+ */
+typedef struct { volatile __s32 counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i) ((atomic_t) { (i) })
+#define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
+
+#define atomic_read(v) ((v)->counter)
+#define atomic64_read(v) ((v)->counter)
+
+#define atomic_set(v,i) (((v)->counter) = (i))
+#define atomic64_set(v,i) (((v)->counter) = (i))
+
+static __inline__ int
+ia64_atomic_add (int i, atomic_t *v)
+{
+ __s32 old, new;
+ CMPXCHG_BUGCHECK_DECL
+
+ do {
+ CMPXCHG_BUGCHECK(v);
+ old = atomic_read(v);
+ new = old + i;
+ } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+ return new;
+}
+
+static __inline__ int
+ia64_atomic64_add (__s64 i, atomic64_t *v)
+{
+ __s64 old, new;
+ CMPXCHG_BUGCHECK_DECL
+
+ do {
+ CMPXCHG_BUGCHECK(v);
+ old = atomic_read(v);
+ new = old + i;
+ } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+ return new;
+}
+
+static __inline__ int
+ia64_atomic_sub (int i, atomic_t *v)
+{
+ __s32 old, new;
+ CMPXCHG_BUGCHECK_DECL
+
+ do {
+ CMPXCHG_BUGCHECK(v);
+ old = atomic_read(v);
+ new = old - i;
+ } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+ return new;
+}
+
+static __inline__ int
+ia64_atomic64_sub (__s64 i, atomic64_t *v)
+{
+ __s64 old, new;
+ CMPXCHG_BUGCHECK_DECL
+
+ do {
+ CMPXCHG_BUGCHECK(v);
+ old = atomic_read(v);
+ new = old - i;
+ } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+ return new;
+}
+
+#define atomic_add_return(i,v) \
+({ \
+ int __ia64_aar_i = (i); \
+ (__builtin_constant_p(i) \
+ && ( (__ia64_aar_i == 1) || (__ia64_aar_i == 4) \
+ || (__ia64_aar_i == 8) || (__ia64_aar_i == 16) \
+ || (__ia64_aar_i == -1) || (__ia64_aar_i == -4) \
+ || (__ia64_aar_i == -8) || (__ia64_aar_i == -16))) \
+ ? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter) \
+ : ia64_atomic_add(__ia64_aar_i, v); \
+})
+
+#define atomic64_add_return(i,v) \
+({ \
+ long __ia64_aar_i = (i); \
+ (__builtin_constant_p(i) \
+ && ( (__ia64_aar_i == 1) || (__ia64_aar_i == 4) \
+ || (__ia64_aar_i == 8) || (__ia64_aar_i == 16) \
+ || (__ia64_aar_i == -1) || (__ia64_aar_i == -4) \
+ || (__ia64_aar_i == -8) || (__ia64_aar_i == -16))) \
+ ? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter) \
+ : ia64_atomic64_add(__ia64_aar_i, v); \
+})
+
+/*
+ * Atomically add I to V and return TRUE if the resulting value is
+ * negative.
+ */
+static __inline__ int
+atomic_add_negative (int i, atomic_t *v)
+{
+ return atomic_add_return(i, v) < 0;
+}
+
+static __inline__ int
+atomic64_add_negative (__s64 i, atomic64_t *v)
+{
+ return atomic64_add_return(i, v) < 0;
+}
+
+#define atomic_sub_return(i,v) \
+({ \
+ int __ia64_asr_i = (i); \
+ (__builtin_constant_p(i) \
+ && ( (__ia64_asr_i == 1) || (__ia64_asr_i == 4) \
+ || (__ia64_asr_i == 8) || (__ia64_asr_i == 16) \
+ || (__ia64_asr_i == -1) || (__ia64_asr_i == -4) \
+ || (__ia64_asr_i == -8) || (__ia64_asr_i == -16))) \
+ ? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter) \
+ : ia64_atomic_sub(__ia64_asr_i, v); \
+})
+
+#define atomic64_sub_return(i,v) \
+({ \
+ long __ia64_asr_i = (i); \
+ (__builtin_constant_p(i) \
+ && ( (__ia64_asr_i == 1) || (__ia64_asr_i == 4) \
+ || (__ia64_asr_i == 8) || (__ia64_asr_i == 16) \
+ || (__ia64_asr_i == -1) || (__ia64_asr_i == -4) \
+ || (__ia64_asr_i == -8) || (__ia64_asr_i == -16))) \
+ ? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter) \
+ : ia64_atomic64_sub(__ia64_asr_i, v); \
+})
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+#define atomic64_dec_return(v) atomic64_sub_return(1, (v))
+#define atomic64_inc_return(v) atomic64_add_return(1, (v))
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
+#define atomic64_inc_and_test(v) (atomic64_add_return(1, (v)) == 0)
+
+#define atomic_add(i,v) atomic_add_return((i), (v))
+#define atomic_sub(i,v) atomic_sub_return((i), (v))
+#define atomic_inc(v) atomic_add(1, (v))
+#define atomic_dec(v) atomic_sub(1, (v))
+
+#define atomic64_add(i,v) atomic64_add_return((i), (v))
+#define atomic64_sub(i,v) atomic64_sub_return((i), (v))
+#define atomic64_inc(v) atomic64_add(1, (v))
+#define atomic64_dec(v) atomic64_sub(1, (v))
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#endif /* _ASM_IA64_ATOMIC_H */
diff --git a/include/asm-ia64/bitops.h b/include/asm-ia64/bitops.h
new file mode 100644
index 0000000..925d54c
--- /dev/null
+++ b/include/asm-ia64/bitops.h
@@ -0,0 +1,410 @@
+#ifndef _ASM_IA64_BITOPS_H
+#define _ASM_IA64_BITOPS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64 O(1)
+ * scheduler patch
+ */
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/bitops.h>
+#include <asm/intrinsics.h>
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered. See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ *
+ * The address must be (at least) "long" aligned.
+ * Note that there are driver (e.g., eepro100) which use these operations to operate on
+ * hw-defined data-structures, so we can't easily change these operations to force a
+ * bigger alignment.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+static __inline__ void
+set_bit (int nr, volatile void *addr)
+{
+ __u32 bit, old, new;
+ volatile __u32 *m;
+ CMPXCHG_BUGCHECK_DECL
+
+ m = (volatile __u32 *) addr + (nr >> 5);
+ bit = 1 << (nr & 31);
+ do {
+ CMPXCHG_BUGCHECK(m);
+ old = *m;
+ new = old | bit;
+ } while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__set_bit (int nr, volatile void *addr)
+{
+ *((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31));
+}
+
+/*
+ * clear_bit() has "acquire" semantics.
+ */
+#define smp_mb__before_clear_bit() smp_mb()
+#define smp_mb__after_clear_bit() do { /* skip */; } while (0)
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered. However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void
+clear_bit (int nr, volatile void *addr)
+{
+ __u32 mask, old, new;
+ volatile __u32 *m;
+ CMPXCHG_BUGCHECK_DECL
+
+ m = (volatile __u32 *) addr + (nr >> 5);
+ mask = ~(1 << (nr & 31));
+ do {
+ CMPXCHG_BUGCHECK(m);
+ old = *m;
+ new = old & mask;
+ } while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __clear_bit - Clears a bit in memory (non-atomic version)
+ */
+static __inline__ void
+__clear_bit (int nr, volatile void *addr)
+{
+ volatile __u32 *p = (__u32 *) addr + (nr >> 5);
+ __u32 m = 1 << (nr & 31);
+ *p &= ~m;
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void
+change_bit (int nr, volatile void *addr)
+{
+ __u32 bit, old, new;
+ volatile __u32 *m;
+ CMPXCHG_BUGCHECK_DECL
+
+ m = (volatile __u32 *) addr + (nr >> 5);
+ bit = (1 << (nr & 31));
+ do {
+ CMPXCHG_BUGCHECK(m);
+ old = *m;
+ new = old ^ bit;
+ } while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__change_bit (int nr, volatile void *addr)
+{
+ *((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int
+test_and_set_bit (int nr, volatile void *addr)
+{
+ __u32 bit, old, new;
+ volatile __u32 *m;
+ CMPXCHG_BUGCHECK_DECL
+
+ m = (volatile __u32 *) addr + (nr >> 5);
+ bit = 1 << (nr & 31);
+ do {
+ CMPXCHG_BUGCHECK(m);
+ old = *m;
+ new = old | bit;
+ } while (cmpxchg_acq(m, old, new) != old);
+ return (old & bit) != 0;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail. You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_set_bit (int nr, volatile void *addr)
+{
+ __u32 *p = (__u32 *) addr + (nr >> 5);
+ __u32 m = 1 << (nr & 31);
+ int oldbitset = (*p & m) != 0;
+
+ *p |= m;
+ return oldbitset;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int
+test_and_clear_bit (int nr, volatile void *addr)
+{
+ __u32 mask, old, new;
+ volatile __u32 *m;
+ CMPXCHG_BUGCHECK_DECL
+
+ m = (volatile __u32 *) addr + (nr >> 5);
+ mask = ~(1 << (nr & 31));
+ do {
+ CMPXCHG_BUGCHECK(m);
+ old = *m;
+ new = old & mask;
+ } while (cmpxchg_acq(m, old, new) != old);
+ return (old & ~mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail. You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_clear_bit(int nr, volatile void * addr)
+{
+ __u32 *p = (__u32 *) addr + (nr >> 5);
+ __u32 m = 1 << (nr & 31);
+ int oldbitset = *p & m;
+
+ *p &= ~m;
+ return oldbitset;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int
+test_and_change_bit (int nr, volatile void *addr)
+{
+ __u32 bit, old, new;
+ volatile __u32 *m;
+ CMPXCHG_BUGCHECK_DECL
+
+ m = (volatile __u32 *) addr + (nr >> 5);
+ bit = (1 << (nr & 31));
+ do {
+ CMPXCHG_BUGCHECK(m);
+ old = *m;
+ new = old ^ bit;
+ } while (cmpxchg_acq(m, old, new) != old);
+ return (old & bit) != 0;
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static __inline__ int
+__test_and_change_bit (int nr, void *addr)
+{
+ __u32 old, bit = (1 << (nr & 31));
+ __u32 *m = (__u32 *) addr + (nr >> 5);
+
+ old = *m;
+ *m = old ^ bit;
+ return (old & bit) != 0;
+}
+
+static __inline__ int
+test_bit (int nr, const volatile void *addr)
+{
+ return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/**
+ * ffz - find the first zero bit in a long word
+ * @x: The long word to find the bit in
+ *
+ * Returns the bit-number (0..63) of the first (least significant) zero bit. Undefined if
+ * no zero exists, so code should check against ~0UL first...
+ */
+static inline unsigned long
+ffz (unsigned long x)
+{
+ unsigned long result;
+
+ result = ia64_popcnt(x & (~x - 1));
+ return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @x: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long
+__ffs (unsigned long x)
+{
+ unsigned long result;
+
+ result = ia64_popcnt((x-1) & ~x);
+ return result;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * find_last_zero_bit - find the last zero bit in a 64 bit quantity
+ * @x: The value to search
+ */
+static inline unsigned long
+ia64_fls (unsigned long x)
+{
+ long double d = x;
+ long exp;
+
+ exp = ia64_getf_exp(d);
+ return exp - 0xffff;
+}
+
+static inline int
+fls (int x)
+{
+ return ia64_fls((unsigned int) x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as the libc and compiler builtin
+ * ffs routines, therefore differs in spirit from the above ffz (man ffs): it operates on
+ * "int" values only and the result value is the bit number + 1. ffs(0) is defined to
+ * return zero.
+ */
+#define ffs(x) __builtin_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+static __inline__ unsigned long
+hweight64 (unsigned long x)
+{
+ unsigned long result;
+ result = ia64_popcnt(x);
+ return result;
+}
+
+#define hweight32(x) (unsigned int) hweight64((x) & 0xfffffffful)
+#define hweight16(x) (unsigned int) hweight64((x) & 0xfffful)
+#define hweight8(x) (unsigned int) hweight64((x) & 0xfful)
+
+#endif /* __KERNEL__ */
+
+extern int __find_next_zero_bit (const void *addr, unsigned long size,
+ unsigned long offset);
+extern int __find_next_bit(const void *addr, unsigned long size,
+ unsigned long offset);
+
+#define find_next_zero_bit(addr, size, offset) \
+ __find_next_zero_bit((addr), (size), (offset))
+#define find_next_bit(addr, size, offset) \
+ __find_next_bit((addr), (size), (offset))
+
+/*
+ * The optimizer actually does good code for this case..
+ */
+#define find_first_zero_bit(addr, size) find_next_zero_bit((addr), (size), 0)
+
+#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
+
+#ifdef __KERNEL__
+
+#define __clear_bit(nr, addr) clear_bit(nr, addr)
+
+#define ext2_set_bit test_and_set_bit
+#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a)
+#define ext2_clear_bit test_and_clear_bit
+#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a)
+#define ext2_test_bit test_bit
+#define ext2_find_first_zero_bit find_first_zero_bit
+#define ext2_find_next_zero_bit find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem. */
+#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+static inline int
+sched_find_first_bit (unsigned long *b)
+{
+ if (unlikely(b[0]))
+ return __ffs(b[0]);
+ if (unlikely(b[1]))
+ return 64 + __ffs(b[1]);
+ return __ffs(b[2]) + 128;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_BITOPS_H */
diff --git a/include/asm-ia64/break.h b/include/asm-ia64/break.h
new file mode 100644
index 0000000..97c7b2d
--- /dev/null
+++ b/include/asm-ia64/break.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_BREAK_H
+#define _ASM_IA64_BREAK_H
+
+/*
+ * IA-64 Linux break numbers.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co
+ * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * OS-specific debug break numbers:
+ */
+#define __IA64_BREAK_KDB 0x80100
+
+/*
+ * OS-specific break numbers:
+ */
+#define __IA64_BREAK_SYSCALL 0x100000
+
+#endif /* _ASM_IA64_BREAK_H */
diff --git a/include/asm-ia64/bug.h b/include/asm-ia64/bug.h
new file mode 100644
index 0000000..2c0cd51
--- /dev/null
+++ b/include/asm-ia64/bug.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_IA64_BUG_H
+#define _ASM_IA64_BUG_H
+
+#if (__GNUC__ > 3) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)
+# define ia64_abort() __builtin_trap()
+#else
+# define ia64_abort() (*(volatile int *) 0 = 0)
+#endif
+#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); ia64_abort(); } while (0)
+
+/* should this BUG should be made generic? */
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-ia64/bugs.h b/include/asm-ia64/bugs.h
new file mode 100644
index 0000000..433523e
--- /dev/null
+++ b/include/asm-ia64/bugs.h
@@ -0,0 +1,19 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ * void check_bugs(void);
+ *
+ * Based on <asm-alpha/bugs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+#ifndef _ASM_IA64_BUGS_H
+#define _ASM_IA64_BUGS_H
+
+#include <asm/processor.h>
+
+extern void check_bugs (void);
+
+#endif /* _ASM_IA64_BUGS_H */
diff --git a/include/asm-ia64/byteorder.h b/include/asm-ia64/byteorder.h
new file mode 100644
index 0000000..69bd41d
--- /dev/null
+++ b/include/asm-ia64/byteorder.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_BYTEORDER_H
+#define _ASM_IA64_BYTEORDER_H
+
+/*
+ * Modified 1998, 1999
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <asm/types.h>
+#include <asm/intrinsics.h>
+#include <linux/compiler.h>
+
+static __inline__ __attribute_const__ __u64
+__ia64_swab64 (__u64 x)
+{
+ __u64 result;
+
+ result = ia64_mux1(x, ia64_mux1_rev);
+ return result;
+}
+
+static __inline__ __attribute_const__ __u32
+__ia64_swab32 (__u32 x)
+{
+ return __ia64_swab64(x) >> 32;
+}
+
+static __inline__ __attribute_const__ __u16
+__ia64_swab16(__u16 x)
+{
+ return __ia64_swab64(x) >> 48;
+}
+
+#define __arch__swab64(x) __ia64_swab64(x)
+#define __arch__swab32(x) __ia64_swab32(x)
+#define __arch__swab16(x) __ia64_swab16(x)
+
+#define __BYTEORDER_HAS_U64__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_IA64_BYTEORDER_H */
diff --git a/include/asm-ia64/cache.h b/include/asm-ia64/cache.h
new file mode 100644
index 0000000..666d8f1
--- /dev/null
+++ b/include/asm-ia64/cache.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_IA64_CACHE_H
+#define _ASM_IA64_CACHE_H
+
+#include <linux/config.h>
+
+/*
+ * Copyright (C) 1998-2000 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/* Bytes per L1 (data) cache line. */
+#define L1_CACHE_SHIFT CONFIG_IA64_L1_CACHE_SHIFT
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
+
+#ifdef CONFIG_SMP
+# define SMP_CACHE_SHIFT L1_CACHE_SHIFT
+# define SMP_CACHE_BYTES L1_CACHE_BYTES
+#else
+ /*
+ * The "aligned" directive can only _increase_ alignment, so this is
+ * safe and provides an easy way to avoid wasting space on a
+ * uni-processor:
+ */
+# define SMP_CACHE_SHIFT 3
+# define SMP_CACHE_BYTES (1 << 3)
+#endif
+
+#endif /* _ASM_IA64_CACHE_H */
diff --git a/include/asm-ia64/cacheflush.h b/include/asm-ia64/cacheflush.h
new file mode 100644
index 0000000..f2dacb4
--- /dev/null
+++ b/include/asm-ia64/cacheflush.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_IA64_CACHEFLUSH_H
+#define _ASM_IA64_CACHEFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/page-flags.h>
+
+#include <asm/bitops.h>
+#include <asm/page.h>
+
+/*
+ * Cache flushing routines. This is the kind of stuff that can be very expensive, so try
+ * to avoid them whenever possible.
+ */
+
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
+#define flush_icache_page(vma,page) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+#define flush_dcache_page(page) \
+do { \
+ clear_bit(PG_arch_1, &(page)->flags); \
+} while (0)
+
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+extern void flush_icache_range (unsigned long start, unsigned long end);
+
+#define flush_icache_user_range(vma, page, user_addr, len) \
+do { \
+ unsigned long _addr = (unsigned long) page_address(page) + ((user_addr) & ~PAGE_MASK); \
+ flush_icache_range(_addr, _addr + (len)); \
+} while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+ flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+#endif /* _ASM_IA64_CACHEFLUSH_H */
diff --git a/include/asm-ia64/checksum.h b/include/asm-ia64/checksum.h
new file mode 100644
index 0000000..1f230ff
--- /dev/null
+++ b/include/asm-ia64/checksum.h
@@ -0,0 +1,76 @@
+#ifndef _ASM_IA64_CHECKSUM_H
+#define _ASM_IA64_CHECKSUM_H
+
+/*
+ * Modified 1998, 1999
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+extern unsigned short ip_fast_csum (unsigned char * iph, unsigned int ihl);
+
+/*
+ * Computes the checksum of the TCP/UDP pseudo-header returns a 16-bit
+ * checksum, already complemented
+ */
+extern unsigned short int csum_tcpudp_magic (unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ unsigned int sum);
+
+extern unsigned int csum_tcpudp_nofold (unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ unsigned int sum);
+
+/*
+ * Computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial (const unsigned char * buff, int len,
+ unsigned int sum);
+
+/*
+ * Same as csum_partial, but copies from src while it checksums.
+ *
+ * Here it is even more important to align src and dst on a 32-bit (or
+ * even better 64-bit) boundary.
+ */
+extern unsigned int csum_partial_copy_from_user (const char *src, char *dst,
+ int len, unsigned int sum,
+ int *errp);
+
+extern unsigned int csum_partial_copy_nocheck (const char *src, char *dst,
+ int len, unsigned int sum);
+
+/*
+ * This routine is used for miscellaneous IP-like checksums, mainly in
+ * icmp.c
+ */
+extern unsigned short ip_compute_csum (unsigned char *buff, int len);
+
+/*
+ * Fold a partial checksum without adding pseudo headers.
+ */
+static inline unsigned short
+csum_fold (unsigned int sum)
+{
+ sum = (sum & 0xffff) + (sum >> 16);
+ sum = (sum & 0xffff) + (sum >> 16);
+ return ~sum;
+}
+
+#endif /* _ASM_IA64_CHECKSUM_H */
diff --git a/include/asm-ia64/compat.h b/include/asm-ia64/compat.h
new file mode 100644
index 0000000..cc0ff0a
--- /dev/null
+++ b/include/asm-ia64/compat.h
@@ -0,0 +1,198 @@
+#ifndef _ASM_IA64_COMPAT_H
+#define _ASM_IA64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ 100
+
+typedef u32 compat_size_t;
+typedef s32 compat_ssize_t;
+typedef s32 compat_time_t;
+typedef s32 compat_clock_t;
+typedef s32 compat_key_t;
+typedef s32 compat_pid_t;
+typedef u16 compat_uid_t;
+typedef u16 compat_gid_t;
+typedef u32 compat_uid32_t;
+typedef u32 compat_gid32_t;
+typedef u16 compat_mode_t;
+typedef u32 compat_ino_t;
+typedef u16 compat_dev_t;
+typedef s32 compat_off_t;
+typedef s64 compat_loff_t;
+typedef u16 compat_nlink_t;
+typedef u16 compat_ipc_pid_t;
+typedef s32 compat_daddr_t;
+typedef u32 compat_caddr_t;
+typedef __kernel_fsid_t compat_fsid_t;
+
+typedef s32 compat_int_t;
+typedef s32 compat_long_t;
+typedef u32 compat_uint_t;
+typedef u32 compat_ulong_t;
+
+struct compat_timespec {
+ compat_time_t tv_sec;
+ s32 tv_nsec;
+};
+
+struct compat_timeval {
+ compat_time_t tv_sec;
+ s32 tv_usec;
+};
+
+struct compat_stat {
+ compat_dev_t st_dev;
+ u16 __pad1;
+ compat_ino_t st_ino;
+ compat_mode_t st_mode;
+ compat_nlink_t st_nlink;
+ compat_uid_t st_uid;
+ compat_gid_t st_gid;
+ compat_dev_t st_rdev;
+ u16 __pad2;
+ u32 st_size;
+ u32 st_blksize;
+ u32 st_blocks;
+ u32 st_atime;
+ u32 st_atime_nsec;
+ u32 st_mtime;
+ u32 st_mtime_nsec;
+ u32 st_ctime;
+ u32 st_ctime_nsec;
+ u32 __unused4;
+ u32 __unused5;
+};
+
+struct compat_flock {
+ short l_type;
+ short l_whence;
+ compat_off_t l_start;
+ compat_off_t l_len;
+ compat_pid_t l_pid;
+};
+
+#define F_GETLK64 12
+#define F_SETLK64 13
+#define F_SETLKW64 14
+
+/*
+ * IA32 uses 4 byte alignment for 64 bit quantities,
+ * so we need to pack this structure.
+ */
+struct compat_flock64 {
+ short l_type;
+ short l_whence;
+ compat_loff_t l_start;
+ compat_loff_t l_len;
+ compat_pid_t l_pid;
+} __attribute__((packed));
+
+struct compat_statfs {
+ int f_type;
+ int f_bsize;
+ int f_blocks;
+ int f_bfree;
+ int f_bavail;
+ int f_files;
+ int f_ffree;
+ compat_fsid_t f_fsid;
+ int f_namelen; /* SunOS ignores this field. */
+ int f_frsize;
+ int f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff
+#define COMPAT_RLIM_INFINITY 0xffffffff
+
+typedef u32 compat_old_sigset_t; /* at least 32 bits */
+
+#define _COMPAT_NSIG 64
+#define _COMPAT_NSIG_BPW 32
+
+typedef u32 compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX 0x7fffffff
+#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+ compat_key_t key;
+ compat_uid32_t uid;
+ compat_gid32_t gid;
+ compat_uid32_t cuid;
+ compat_gid32_t cgid;
+ unsigned short mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ compat_ulong_t unused1;
+ compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+ struct compat_ipc64_perm sem_perm;
+ compat_time_t sem_otime;
+ compat_ulong_t __unused1;
+ compat_time_t sem_ctime;
+ compat_ulong_t __unused2;
+ compat_ulong_t sem_nsems;
+ compat_ulong_t __unused3;
+ compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+ struct compat_ipc64_perm msg_perm;
+ compat_time_t msg_stime;
+ compat_ulong_t __unused1;
+ compat_time_t msg_rtime;
+ compat_ulong_t __unused2;
+ compat_time_t msg_ctime;
+ compat_ulong_t __unused3;
+ compat_ulong_t msg_cbytes;
+ compat_ulong_t msg_qnum;
+ compat_ulong_t msg_qbytes;
+ compat_pid_t msg_lspid;
+ compat_pid_t msg_lrpid;
+ compat_ulong_t __unused4;
+ compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+ struct compat_ipc64_perm shm_perm;
+ compat_size_t shm_segsz;
+ compat_time_t shm_atime;
+ compat_ulong_t __unused1;
+ compat_time_t shm_dtime;
+ compat_ulong_t __unused2;
+ compat_time_t shm_ctime;
+ compat_ulong_t __unused3;
+ compat_pid_t shm_cpid;
+ compat_pid_t shm_lpid;
+ compat_ulong_t shm_nattch;
+ compat_ulong_t __unused4;
+ compat_ulong_t __unused5;
+};
+
+/*
+ * A pointer passed in from user mode. This should not be used for syscall parameters,
+ * just declare them as pointers because the syscall entry code will have appropriately
+ * comverted them already.
+ */
+typedef u32 compat_uptr_t;
+
+static inline void __user *
+compat_ptr (compat_uptr_t uptr)
+{
+ return (void __user *) (unsigned long) uptr;
+}
+
+static __inline__ void __user *
+compat_alloc_user_space (long len)
+{
+ struct pt_regs *regs = ia64_task_regs(current);
+ return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);
+}
+
+#endif /* _ASM_IA64_COMPAT_H */
diff --git a/include/asm-ia64/cpu.h b/include/asm-ia64/cpu.h
new file mode 100644
index 0000000..e87fa32
--- /dev/null
+++ b/include/asm-ia64/cpu.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_CPU_H_
+#define _ASM_IA64_CPU_H_
+
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/topology.h>
+#include <linux/percpu.h>
+
+struct ia64_cpu {
+ struct cpu cpu;
+};
+
+DECLARE_PER_CPU(struct ia64_cpu, cpu_devices);
+
+DECLARE_PER_CPU(int, cpu_state);
+
+extern int arch_register_cpu(int num);
+#ifdef CONFIG_HOTPLUG_CPU
+extern void arch_unregister_cpu(int);
+#endif
+
+#endif /* _ASM_IA64_CPU_H_ */
diff --git a/include/asm-ia64/cputime.h b/include/asm-ia64/cputime.h
new file mode 100644
index 0000000..72400a7
--- /dev/null
+++ b/include/asm-ia64/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __IA64_CPUTIME_H
+#define __IA64_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __IA64_CPUTIME_H */
diff --git a/include/asm-ia64/current.h b/include/asm-ia64/current.h
new file mode 100644
index 0000000..c659f90
--- /dev/null
+++ b/include/asm-ia64/current.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_IA64_CURRENT_H
+#define _ASM_IA64_CURRENT_H
+
+/*
+ * Modified 1998-2000
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/intrinsics.h>
+
+/*
+ * In kernel mode, thread pointer (r13) is used to point to the current task
+ * structure.
+ */
+#define current ((struct task_struct *) ia64_getreg(_IA64_REG_TP))
+
+#endif /* _ASM_IA64_CURRENT_H */
diff --git a/include/asm-ia64/cyclone.h b/include/asm-ia64/cyclone.h
new file mode 100644
index 0000000..88f6500
--- /dev/null
+++ b/include/asm-ia64/cyclone.h
@@ -0,0 +1,15 @@
+#ifndef ASM_IA64_CYCLONE_H
+#define ASM_IA64_CYCLONE_H
+
+#ifdef CONFIG_IA64_CYCLONE
+extern int use_cyclone;
+extern void __init cyclone_setup(void);
+#else /* CONFIG_IA64_CYCLONE */
+#define use_cyclone 0
+static inline void cyclone_setup(void)
+{
+ printk(KERN_ERR "Cyclone Counter: System not configured"
+ " w/ CONFIG_IA64_CYCLONE.\n");
+}
+#endif /* CONFIG_IA64_CYCLONE */
+#endif /* !ASM_IA64_CYCLONE_H */
diff --git a/include/asm-ia64/delay.h b/include/asm-ia64/delay.h
new file mode 100644
index 0000000..57182d6
--- /dev/null
+++ b/include/asm-ia64/delay.h
@@ -0,0 +1,97 @@
+#ifndef _ASM_IA64_DELAY_H
+#define _ASM_IA64_DELAY_H
+
+/*
+ * Delay routines using a pre-computed "cycles/usec" value.
+ *
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/compiler.h>
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+static __inline__ void
+ia64_set_itm (unsigned long val)
+{
+ ia64_setreg(_IA64_REG_CR_ITM, val);
+ ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itm (void)
+{
+ unsigned long result;
+
+ result = ia64_getreg(_IA64_REG_CR_ITM);
+ ia64_srlz_d();
+ return result;
+}
+
+static __inline__ void
+ia64_set_itv (unsigned long val)
+{
+ ia64_setreg(_IA64_REG_CR_ITV, val);
+ ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itv (void)
+{
+ return ia64_getreg(_IA64_REG_CR_ITV);
+}
+
+static __inline__ void
+ia64_set_itc (unsigned long val)
+{
+ ia64_setreg(_IA64_REG_AR_ITC, val);
+ ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itc (void)
+{
+ unsigned long result;
+
+ result = ia64_getreg(_IA64_REG_AR_ITC);
+ ia64_barrier();
+#ifdef CONFIG_ITANIUM
+ while (unlikely((__s32) result == -1)) {
+ result = ia64_getreg(_IA64_REG_AR_ITC);
+ ia64_barrier();
+ }
+#endif
+ return result;
+}
+
+extern void ia64_delay_loop (unsigned long loops);
+
+static __inline__ void
+__delay (unsigned long loops)
+{
+ if (unlikely(loops < 1))
+ return;
+
+ ia64_delay_loop (loops - 1);
+}
+
+static __inline__ void
+udelay (unsigned long usecs)
+{
+ unsigned long start = ia64_get_itc();
+ unsigned long cycles = usecs*local_cpu_data->cyc_per_usec;
+
+ while (ia64_get_itc() - start < cycles)
+ cpu_relax();
+}
+
+#endif /* _ASM_IA64_DELAY_H */
diff --git a/include/asm-ia64/div64.h b/include/asm-ia64/div64.h
new file mode 100644
index 0000000..6cd978c
--- /dev/null
+++ b/include/asm-ia64/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-ia64/dma-mapping.h b/include/asm-ia64/dma-mapping.h
new file mode 100644
index 0000000..6347c98
--- /dev/null
+++ b/include/asm-ia64/dma-mapping.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_IA64_DMA_MAPPING_H
+#define _ASM_IA64_DMA_MAPPING_H
+
+/*
+ * Copyright (C) 2003-2004 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <linux/config.h>
+#include <asm/machvec.h>
+
+#define dma_alloc_coherent platform_dma_alloc_coherent
+#define dma_alloc_noncoherent platform_dma_alloc_coherent /* coherent mem. is cheap */
+#define dma_free_coherent platform_dma_free_coherent
+#define dma_free_noncoherent platform_dma_free_coherent
+#define dma_map_single platform_dma_map_single
+#define dma_map_sg platform_dma_map_sg
+#define dma_unmap_single platform_dma_unmap_single
+#define dma_unmap_sg platform_dma_unmap_sg
+#define dma_sync_single_for_cpu platform_dma_sync_single_for_cpu
+#define dma_sync_sg_for_cpu platform_dma_sync_sg_for_cpu
+#define dma_sync_single_for_device platform_dma_sync_single_for_device
+#define dma_sync_sg_for_device platform_dma_sync_sg_for_device
+#define dma_mapping_error platform_dma_mapping_error
+
+#define dma_map_page(dev, pg, off, size, dir) \
+ dma_map_single(dev, page_address(pg) + (off), (size), (dir))
+#define dma_unmap_page(dev, dma_addr, size, dir) \
+ dma_unmap_single(dev, dma_addr, size, dir)
+
+/*
+ * Rest of this file is part of the "Advanced DMA API". Use at your own risk.
+ * See Documentation/DMA-API.txt for details.
+ */
+
+#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir) \
+ dma_sync_single_for_cpu(dev, dma_handle, size, dir)
+#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir) \
+ dma_sync_single_for_device(dev, dma_handle, size, dir)
+
+#define dma_supported platform_dma_supported
+
+static inline int
+dma_set_mask (struct device *dev, u64 mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+ *dev->dma_mask = mask;
+ return 0;
+}
+
+static inline int
+dma_get_cache_alignment (void)
+{
+ extern int ia64_max_cacheline_size;
+ return ia64_max_cacheline_size;
+}
+
+static inline void
+dma_cache_sync (void *vaddr, size_t size, enum dma_data_direction dir)
+{
+ /*
+ * IA-64 is cache-coherent, so this is mostly a no-op. However, we do need to
+ * ensure that dma_cache_sync() enforces order, hence the mb().
+ */
+ mb();
+}
+
+#define dma_is_consistent(dma_handle) (1) /* all we do is coherent memory... */
+
+#endif /* _ASM_IA64_DMA_MAPPING_H */
diff --git a/include/asm-ia64/dma.h b/include/asm-ia64/dma.h
new file mode 100644
index 0000000..3be1b49
--- /dev/null
+++ b/include/asm-ia64/dma.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_IA64_DMA_H
+#define _ASM_IA64_DMA_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/io.h> /* need byte IO */
+
+extern unsigned long MAX_DMA_ADDRESS;
+
+#ifdef CONFIG_PCI
+ extern int isa_dma_bridge_buggy;
+#else
+# define isa_dma_bridge_buggy (0)
+#endif
+
+#define free_dma(x)
+
+#endif /* _ASM_IA64_DMA_H */
diff --git a/include/asm-ia64/elf.h b/include/asm-ia64/elf.h
new file mode 100644
index 0000000..7d4ccc4
--- /dev/null
+++ b/include/asm-ia64/elf.h
@@ -0,0 +1,259 @@
+#ifndef _ASM_IA64_ELF_H
+#define _ASM_IA64_ELF_H
+
+/*
+ * ELF-specific definitions.
+ *
+ * Copyright (C) 1998-1999, 2002-2004 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_IA_64)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS64
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_IA_64
+
+#define USE_ELF_CORE_DUMP
+
+/* Least-significant four bits of ELF header's e_flags are OS-specific. The bits are
+ interpreted as follows by Linux: */
+#define EF_IA_64_LINUX_EXECUTABLE_STACK 0x1 /* is stack (& heap) executable by default? */
+
+#define ELF_EXEC_PAGESIZE PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.
+ * Typical use of this is to invoke "./ld.so someprog" to test out a
+ * new version of the loader. We need to make sure that it is out of
+ * the way of the program that it will "exec", and that there is
+ * sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE + 0x800000000UL)
+
+#define PT_IA_64_UNWIND 0x70000001
+
+/* IA-64 relocations: */
+#define R_IA64_NONE 0x00 /* none */
+#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */
+#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */
+#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */
+#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */
+#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */
+#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */
+#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */
+#define R_IA64_GPREL22 0x2a /* @gprel(sym+add), add imm22 */
+#define R_IA64_GPREL64I 0x2b /* @gprel(sym+add), mov imm64 */
+#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym+add), data4 MSB */
+#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym+add), data4 LSB */
+#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym+add), data8 MSB */
+#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF22 0x32 /* @ltoff(sym+add), add imm22 */
+#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym+add), add imm22 */
+#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym+add), data8 MSB */
+#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym+add), data8 LSB */
+#define R_IA64_FPTR64I 0x43 /* @fptr(sym+add), mov imm64 */
+#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym+add), data4 MSB */
+#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym+add), data4 LSB */
+#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym+add), data8 MSB */
+#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym+add), data8 LSB */
+#define R_IA64_PCREL60B 0x48 /* @pcrel(sym+add), brl */
+#define R_IA64_PCREL21B 0x49 /* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL21M 0x4a /* @pcrel(sym+add), chk.s */
+#define R_IA64_PCREL21F 0x4b /* @pcrel(sym+add), fchkf */
+#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym+add), data4 MSB */
+#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym+add), data4 LSB */
+#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym+add), data8 MSB */
+#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */
+#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */
+#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), 4 MSB */
+#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), 4 LSB */
+#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), 8 MSB */
+#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), 8 LSB */
+#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym+add), data4 MSB */
+#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym+add), data4 LSB */
+#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym+add), data8 MSB */
+#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym+add), data8 LSB */
+#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym+add), data4 MSB */
+#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym+add), data4 LSB */
+#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym+add), data8 MSB */
+#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym+add), data8 LSB */
+#define R_IA64_REL32MSB 0x6c /* data 4 + REL */
+#define R_IA64_REL32LSB 0x6d /* data 4 + REL */
+#define R_IA64_REL64MSB 0x6e /* data 8 + REL */
+#define R_IA64_REL64LSB 0x6f /* data 8 + REL */
+#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */
+#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */
+#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */
+#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */
+#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL22 0x7a /* @pcrel(sym+add), imm22 */
+#define R_IA64_PCREL64I 0x7b /* @pcrel(sym+add), imm64 */
+#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */
+#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */
+#define R_IA64_COPY 0x84 /* dynamic reloc, data copy */
+#define R_IA64_SUB 0x85 /* -symbol + addend, add imm22 */
+#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */
+#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */
+#define R_IA64_TPREL14 0x91 /* @tprel(sym+add), add imm14 */
+#define R_IA64_TPREL22 0x92 /* @tprel(sym+add), add imm22 */
+#define R_IA64_TPREL64I 0x93 /* @tprel(sym+add), add imm64 */
+#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym+add), data8 MSB */
+#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), add imm22 */
+#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym+add), data8 MSB */
+#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(s+a)), imm22 */
+#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym+add), imm14 */
+#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym+add), imm22 */
+#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym+add), imm64 */
+#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym+add), data4 MSB */
+#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym+add), data4 LSB */
+#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym+add), data8 MSB */
+#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */
+
+/* IA-64 specific section flags: */
+#define SHF_IA_64_SHORT 0x10000000 /* section near gp */
+
+/*
+ * We use (abuse?) this macro to insert the (empty) vm_area that is
+ * used to map the register backing store. I don't see any better
+ * place to do this, but we should discuss this with Linus once we can
+ * talk to him...
+ */
+extern void ia64_init_addr_space (void);
+#define ELF_PLAT_INIT(_r, load_addr) ia64_init_addr_space()
+
+/* ELF register definitions. This is needed for core dump support. */
+
+/*
+ * elf_gregset_t contains the application-level state in the following order:
+ * r0-r31
+ * NaT bits (for r0-r31; bit N == 1 iff rN is a NaT)
+ * predicate registers (p0-p63)
+ * b0-b7
+ * ip cfm psr
+ * ar.rsc ar.bsp ar.bspstore ar.rnat
+ * ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
+ */
+#define ELF_NGREG 128 /* we really need just 72 but let's leave some headroom... */
+#define ELF_NFPREG 128 /* f0 and f1 could be omitted, but so what... */
+
+typedef unsigned long elf_fpxregset_t;
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct ia64_fpreg elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+
+
+struct pt_regs; /* forward declaration... */
+extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst);
+#define ELF_CORE_COPY_REGS(_dest,_regs) ia64_elf_core_copy_regs(_regs, _dest);
+
+/* This macro yields a bitmask that programs can use to figure out
+ what instruction set this CPU supports. */
+#define ELF_HWCAP 0
+
+/* This macro yields a string that ld.so will use to load
+ implementation specific libraries for optimization. Not terribly
+ relevant until we have real hardware to play with... */
+#define ELF_PLATFORM NULL
+
+/*
+ * Architecture-neutral AT_ values are in the range 0-17. Leave some room for more of
+ * them, start the architecture-specific ones at 32.
+ */
+#define AT_SYSINFO 32
+#define AT_SYSINFO_EHDR 33
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
+#define elf_read_implies_exec(ex, executable_stack) \
+ ((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
+
+struct task_struct;
+
+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_gregs) dump_task_regs(tsk, elf_gregs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+#define GATE_EHDR ((const struct elfhdr *) GATE_ADDR)
+
+#define ARCH_DLINFO \
+do { \
+ extern char __kernel_syscall_via_epc[]; \
+ NEW_AUX_ENT(AT_SYSINFO, (unsigned long) __kernel_syscall_via_epc); \
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, (unsigned long) GATE_EHDR); \
+} while (0)
+
+
+/*
+ * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
+ * extra segments containing the gate DSO contents. Dumping its
+ * contents makes post-mortem fully interpretable later without matching up
+ * the same kernel and hardware config to see what PC values meant.
+ * Dumping its extra ELF program headers includes all the other information
+ * a debugger needs to easily find how the gate DSO was being used.
+ */
+#define ELF_CORE_EXTRA_PHDRS (GATE_EHDR->e_phnum)
+#define ELF_CORE_WRITE_EXTRA_PHDRS \
+do { \
+ const struct elf_phdr *const gate_phdrs = \
+ (const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff); \
+ int i; \
+ Elf64_Off ofs = 0; \
+ for (i = 0; i < GATE_EHDR->e_phnum; ++i) { \
+ struct elf_phdr phdr = gate_phdrs[i]; \
+ if (phdr.p_type == PT_LOAD) { \
+ phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \
+ phdr.p_filesz = phdr.p_memsz; \
+ if (ofs == 0) { \
+ ofs = phdr.p_offset = offset; \
+ offset += phdr.p_filesz; \
+ } \
+ else \
+ phdr.p_offset = ofs; \
+ } \
+ else \
+ phdr.p_offset += ofs; \
+ phdr.p_paddr = 0; /* match other core phdrs */ \
+ DUMP_WRITE(&phdr, sizeof(phdr)); \
+ } \
+} while (0)
+#define ELF_CORE_WRITE_EXTRA_DATA \
+do { \
+ const struct elf_phdr *const gate_phdrs = \
+ (const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff); \
+ int i; \
+ for (i = 0; i < GATE_EHDR->e_phnum; ++i) { \
+ if (gate_phdrs[i].p_type == PT_LOAD) { \
+ DUMP_WRITE((void *) gate_phdrs[i].p_vaddr, \
+ PAGE_ALIGN(gate_phdrs[i].p_memsz)); \
+ break; \
+ } \
+ } \
+} while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_ELF_H */
diff --git a/include/asm-ia64/errno.h b/include/asm-ia64/errno.h
new file mode 100644
index 0000000..4c82b50
--- /dev/null
+++ b/include/asm-ia64/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/include/asm-ia64/fcntl.h b/include/asm-ia64/fcntl.h
new file mode 100644
index 0000000..d193981
--- /dev/null
+++ b/include/asm-ia64/fcntl.h
@@ -0,0 +1,84 @@
+#ifndef _ASM_IA64_FCNTL_H
+#define _ASM_IA64_FCNTL_H
+/*
+ * Based on <asm-i386/fcntl.h>.
+ *
+ * Modified 1998-2000
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+/*
+ * open/fcntl - O_SYNC is only implemented on blocks devices and on
+ * files located on an ext2 file system
+ */
+#define O_ACCMODE 0003
+#define O_RDONLY 00
+#define O_WRONLY 01
+#define O_RDWR 02
+#define O_CREAT 0100 /* not fcntl */
+#define O_EXCL 0200 /* not fcntl */
+#define O_NOCTTY 0400 /* not fcntl */
+#define O_TRUNC 01000 /* not fcntl */
+#define O_APPEND 02000
+#define O_NONBLOCK 04000
+#define O_NDELAY O_NONBLOCK
+#define O_SYNC 010000
+#define FASYNC 020000 /* fcntl, for BSD compatibility */
+#define O_DIRECT 040000 /* direct disk access hint - currently ignored */
+#define O_LARGEFILE 0100000
+#define O_DIRECTORY 0200000 /* must be a directory */
+#define O_NOFOLLOW 0400000 /* don't follow links */
+#define O_NOATIME 01000000
+
+#define F_DUPFD 0 /* dup */
+#define F_GETFD 1 /* get close_on_exec */
+#define F_SETFD 2 /* set/clear close_on_exec */
+#define F_GETFL 3 /* get file->f_flags */
+#define F_SETFL 4 /* set file->f_flags */
+#define F_GETLK 5
+#define F_SETLK 6
+#define F_SETLKW 7
+
+#define F_SETOWN 8 /* for sockets. */
+#define F_GETOWN 9 /* for sockets. */
+#define F_SETSIG 10 /* for sockets. */
+#define F_GETSIG 11 /* for sockets. */
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK 0
+#define F_WRLCK 1
+#define F_UNLCK 2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK 4 /* or 3 */
+#define F_SHLCK 8 /* or 4 */
+
+/* for leases */
+#define F_INPROGRESS 16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH 1 /* shared lock */
+#define LOCK_EX 2 /* exclusive lock */
+#define LOCK_NB 4 /* or'd with one of the above to prevent
+ blocking */
+#define LOCK_UN 8 /* remove lock */
+
+#define LOCK_MAND 32 /* This is a mandatory flock */
+#define LOCK_READ 64 /* ... Which allows concurrent read operations */
+#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */
+#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */
+
+struct flock {
+ short l_type;
+ short l_whence;
+ off_t l_start;
+ off_t l_len;
+ pid_t l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE 1024
+
+#endif /* _ASM_IA64_FCNTL_H */
diff --git a/include/asm-ia64/fpswa.h b/include/asm-ia64/fpswa.h
new file mode 100644
index 0000000..62edfce
--- /dev/null
+++ b/include/asm-ia64/fpswa.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_IA64_FPSWA_H
+#define _ASM_IA64_FPSWA_H
+
+/*
+ * Floating-point Software Assist
+ *
+ * Copyright (C) 1999 Intel Corporation.
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Goutham Rao <goutham.rao@intel.com>
+ */
+
+typedef struct {
+ /* 4 * 128 bits */
+ unsigned long fp_lp[4*2];
+} fp_state_low_preserved_t;
+
+typedef struct {
+ /* 10 * 128 bits */
+ unsigned long fp_lv[10 * 2];
+} fp_state_low_volatile_t;
+
+typedef struct {
+ /* 16 * 128 bits */
+ unsigned long fp_hp[16 * 2];
+} fp_state_high_preserved_t;
+
+typedef struct {
+ /* 96 * 128 bits */
+ unsigned long fp_hv[96 * 2];
+} fp_state_high_volatile_t;
+
+/**
+ * floating point state to be passed to the FP emulation library by
+ * the trap/fault handler
+ */
+typedef struct {
+ unsigned long bitmask_low64;
+ unsigned long bitmask_high64;
+ fp_state_low_preserved_t *fp_state_low_preserved;
+ fp_state_low_volatile_t *fp_state_low_volatile;
+ fp_state_high_preserved_t *fp_state_high_preserved;
+ fp_state_high_volatile_t *fp_state_high_volatile;
+} fp_state_t;
+
+typedef struct {
+ unsigned long status;
+ unsigned long err0;
+ unsigned long err1;
+ unsigned long err2;
+} fpswa_ret_t;
+
+/**
+ * function header for the Floating Point software assist
+ * library. This function is invoked by the Floating point software
+ * assist trap/fault handler.
+ */
+typedef fpswa_ret_t (*efi_fpswa_t) (unsigned long trap_type, void *bundle, unsigned long *ipsr,
+ unsigned long *fsr, unsigned long *isr, unsigned long *preds,
+ unsigned long *ifs, fp_state_t *fp_state);
+
+/**
+ * This is the FPSWA library interface as defined by EFI. We need to pass a
+ * pointer to the interface itself on a call to the assist library
+ */
+typedef struct {
+ unsigned int revision;
+ unsigned int reserved;
+ efi_fpswa_t fpswa;
+} fpswa_interface_t;
+
+extern fpswa_interface_t *fpswa_interface;
+
+#endif /* _ASM_IA64_FPSWA_H */
diff --git a/include/asm-ia64/fpu.h b/include/asm-ia64/fpu.h
new file mode 100644
index 0000000..3859558
--- /dev/null
+++ b/include/asm-ia64/fpu.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_FPU_H
+#define _ASM_IA64_FPU_H
+
+/*
+ * Copyright (C) 1998, 1999, 2002, 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/types.h>
+
+/* floating point status register: */
+#define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */
+#define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */
+#define FPSR_TRAP_ZD (1 << 2) /* zero-divide trap disabled */
+#define FPSR_TRAP_OD (1 << 3) /* overflow trap disabled */
+#define FPSR_TRAP_UD (1 << 4) /* underflow trap disabled */
+#define FPSR_TRAP_ID (1 << 5) /* inexact trap disabled */
+#define FPSR_S0(x) ((x) << 6)
+#define FPSR_S1(x) ((x) << 19)
+#define FPSR_S2(x) (__IA64_UL(x) << 32)
+#define FPSR_S3(x) (__IA64_UL(x) << 45)
+
+/* floating-point status field controls: */
+#define FPSF_FTZ (1 << 0) /* flush-to-zero */
+#define FPSF_WRE (1 << 1) /* widest-range exponent */
+#define FPSF_PC(x) (((x) & 0x3) << 2) /* precision control */
+#define FPSF_RC(x) (((x) & 0x3) << 4) /* rounding control */
+#define FPSF_TD (1 << 6) /* trap disabled */
+
+/* floating-point status field flags: */
+#define FPSF_V (1 << 7) /* invalid operation flag */
+#define FPSF_D (1 << 8) /* denormal/unnormal operand flag */
+#define FPSF_Z (1 << 9) /* zero divide (IEEE) flag */
+#define FPSF_O (1 << 10) /* overflow (IEEE) flag */
+#define FPSF_U (1 << 11) /* underflow (IEEE) flag */
+#define FPSF_I (1 << 12) /* inexact (IEEE) flag) */
+
+/* floating-point rounding control: */
+#define FPRC_NEAREST 0x0
+#define FPRC_NEGINF 0x1
+#define FPRC_POSINF 0x2
+#define FPRC_TRUNC 0x3
+
+#define FPSF_DEFAULT (FPSF_PC (0x3) | FPSF_RC (FPRC_NEAREST))
+
+/* This default value is the same as HP-UX uses. Don't change it
+ without a very good reason. */
+#define FPSR_DEFAULT (FPSR_TRAP_VD | FPSR_TRAP_DD | FPSR_TRAP_ZD \
+ | FPSR_TRAP_OD | FPSR_TRAP_UD | FPSR_TRAP_ID \
+ | FPSR_S0 (FPSF_DEFAULT) \
+ | FPSR_S1 (FPSF_DEFAULT | FPSF_TD | FPSF_WRE) \
+ | FPSR_S2 (FPSF_DEFAULT | FPSF_TD) \
+ | FPSR_S3 (FPSF_DEFAULT | FPSF_TD))
+
+# ifndef __ASSEMBLY__
+
+struct ia64_fpreg {
+ union {
+ unsigned long bits[2];
+ long double __dummy; /* force 16-byte alignment */
+ } u;
+};
+
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_FPU_H */
diff --git a/include/asm-ia64/gcc_intrin.h b/include/asm-ia64/gcc_intrin.h
new file mode 100644
index 0000000..7c357df
--- /dev/null
+++ b/include/asm-ia64/gcc_intrin.h
@@ -0,0 +1,597 @@
+#ifndef _ASM_IA64_GCC_INTRIN_H
+#define _ASM_IA64_GCC_INTRIN_H
+/*
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#include <linux/compiler.h>
+
+/* define this macro to get some asm stmts included in 'c' files */
+#define ASM_SUPPORTED
+
+/* Optimization barrier */
+/* The "volatile" is due to gcc bugs */
+#define ia64_barrier() asm volatile ("":::"memory")
+
+#define ia64_stop() asm volatile (";;"::)
+
+#define ia64_invala_gr(regnum) asm volatile ("invala.e r%0" :: "i"(regnum))
+
+#define ia64_invala_fr(regnum) asm volatile ("invala.e f%0" :: "i"(regnum))
+
+extern void ia64_bad_param_for_setreg (void);
+extern void ia64_bad_param_for_getreg (void);
+
+register unsigned long ia64_r13 asm ("r13") __attribute_used__;
+
+#define ia64_setreg(regnum, val) \
+({ \
+ switch (regnum) { \
+ case _IA64_REG_PSR_L: \
+ asm volatile ("mov psr.l=%0" :: "r"(val) : "memory"); \
+ break; \
+ case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC: \
+ asm volatile ("mov ar%0=%1" :: \
+ "i" (regnum - _IA64_REG_AR_KR0), \
+ "r"(val): "memory"); \
+ break; \
+ case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1: \
+ asm volatile ("mov cr%0=%1" :: \
+ "i" (regnum - _IA64_REG_CR_DCR), \
+ "r"(val): "memory" ); \
+ break; \
+ case _IA64_REG_SP: \
+ asm volatile ("mov r12=%0" :: \
+ "r"(val): "memory"); \
+ break; \
+ case _IA64_REG_GP: \
+ asm volatile ("mov gp=%0" :: "r"(val) : "memory"); \
+ break; \
+ default: \
+ ia64_bad_param_for_setreg(); \
+ break; \
+ } \
+})
+
+#define ia64_getreg(regnum) \
+({ \
+ __u64 ia64_intri_res; \
+ \
+ switch (regnum) { \
+ case _IA64_REG_GP: \
+ asm volatile ("mov %0=gp" : "=r"(ia64_intri_res)); \
+ break; \
+ case _IA64_REG_IP: \
+ asm volatile ("mov %0=ip" : "=r"(ia64_intri_res)); \
+ break; \
+ case _IA64_REG_PSR: \
+ asm volatile ("mov %0=psr" : "=r"(ia64_intri_res)); \
+ break; \
+ case _IA64_REG_TP: /* for current() */ \
+ ia64_intri_res = ia64_r13; \
+ break; \
+ case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC: \
+ asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res) \
+ : "i"(regnum - _IA64_REG_AR_KR0)); \
+ break; \
+ case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1: \
+ asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res) \
+ : "i" (regnum - _IA64_REG_CR_DCR)); \
+ break; \
+ case _IA64_REG_SP: \
+ asm volatile ("mov %0=sp" : "=r" (ia64_intri_res)); \
+ break; \
+ default: \
+ ia64_bad_param_for_getreg(); \
+ break; \
+ } \
+ ia64_intri_res; \
+})
+
+#define ia64_hint_pause 0
+
+#define ia64_hint(mode) \
+({ \
+ switch (mode) { \
+ case ia64_hint_pause: \
+ asm volatile ("hint @pause" ::: "memory"); \
+ break; \
+ } \
+})
+
+
+/* Integer values for mux1 instruction */
+#define ia64_mux1_brcst 0
+#define ia64_mux1_mix 8
+#define ia64_mux1_shuf 9
+#define ia64_mux1_alt 10
+#define ia64_mux1_rev 11
+
+#define ia64_mux1(x, mode) \
+({ \
+ __u64 ia64_intri_res; \
+ \
+ switch (mode) { \
+ case ia64_mux1_brcst: \
+ asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x)); \
+ break; \
+ case ia64_mux1_mix: \
+ asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x)); \
+ break; \
+ case ia64_mux1_shuf: \
+ asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x)); \
+ break; \
+ case ia64_mux1_alt: \
+ asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x)); \
+ break; \
+ case ia64_mux1_rev: \
+ asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x)); \
+ break; \
+ } \
+ ia64_intri_res; \
+})
+
+#define ia64_popcnt(x) \
+({ \
+ __u64 ia64_intri_res; \
+ asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x)); \
+ \
+ ia64_intri_res; \
+})
+
+#define ia64_getf_exp(x) \
+({ \
+ long ia64_intri_res; \
+ \
+ asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x)); \
+ \
+ ia64_intri_res; \
+})
+
+#define ia64_shrp(a, b, count) \
+({ \
+ __u64 ia64_intri_res; \
+ asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count)); \
+ ia64_intri_res; \
+})
+
+#define ia64_ldfs(regnum, x) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x)); \
+})
+
+#define ia64_ldfd(regnum, x) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x)); \
+})
+
+#define ia64_ldfe(regnum, x) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x)); \
+})
+
+#define ia64_ldf8(regnum, x) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x)); \
+})
+
+#define ia64_ldf_fill(regnum, x) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x)); \
+})
+
+#define ia64_stfs(x, regnum) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \
+})
+
+#define ia64_stfd(x, regnum) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \
+})
+
+#define ia64_stfe(x, regnum) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \
+})
+
+#define ia64_stf8(x, regnum) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \
+})
+
+#define ia64_stf_spill(x, regnum) \
+({ \
+ register double __f__ asm ("f"#regnum); \
+ asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \
+})
+
+#define ia64_fetchadd4_acq(p, inc) \
+({ \
+ \
+ __u64 ia64_intri_res; \
+ asm volatile ("fetchadd4.acq %0=[%1],%2" \
+ : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \
+ : "memory"); \
+ \
+ ia64_intri_res; \
+})
+
+#define ia64_fetchadd4_rel(p, inc) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("fetchadd4.rel %0=[%1],%2" \
+ : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \
+ : "memory"); \
+ \
+ ia64_intri_res; \
+})
+
+#define ia64_fetchadd8_acq(p, inc) \
+({ \
+ \
+ __u64 ia64_intri_res; \
+ asm volatile ("fetchadd8.acq %0=[%1],%2" \
+ : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \
+ : "memory"); \
+ \
+ ia64_intri_res; \
+})
+
+#define ia64_fetchadd8_rel(p, inc) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("fetchadd8.rel %0=[%1],%2" \
+ : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \
+ : "memory"); \
+ \
+ ia64_intri_res; \
+})
+
+#define ia64_xchg1(ptr,x) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("xchg1 %0=[%1],%2" \
+ : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_xchg2(ptr,x) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res) \
+ : "r" (ptr), "r" (x) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_xchg4(ptr,x) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res) \
+ : "r" (ptr), "r" (x) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_xchg8(ptr,x) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res) \
+ : "r" (ptr), "r" (x) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_cmpxchg1_acq(ptr, new, old) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \
+ asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv": \
+ "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_cmpxchg1_rel(ptr, new, old) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \
+ asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv": \
+ "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_cmpxchg2_acq(ptr, new, old) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \
+ asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv": \
+ "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_cmpxchg2_rel(ptr, new, old) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \
+ \
+ asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv": \
+ "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_cmpxchg4_acq(ptr, new, old) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \
+ asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv": \
+ "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_cmpxchg4_rel(ptr, new, old) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \
+ asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv": \
+ "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_cmpxchg8_acq(ptr, new, old) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \
+ asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv": \
+ "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_cmpxchg8_rel(ptr, new, old) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \
+ \
+ asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv": \
+ "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \
+ ia64_intri_res; \
+})
+
+#define ia64_mf() asm volatile ("mf" ::: "memory")
+#define ia64_mfa() asm volatile ("mf.a" ::: "memory")
+
+#define ia64_invala() asm volatile ("invala" ::: "memory")
+
+#define ia64_thash(addr) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr)); \
+ ia64_intri_res; \
+})
+
+#define ia64_srlz_i() asm volatile (";; srlz.i ;;" ::: "memory")
+#define ia64_srlz_d() asm volatile (";; srlz.d" ::: "memory");
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define ia64_dv_serialize_data() asm volatile (".serialize.data");
+# define ia64_dv_serialize_instruction() asm volatile (".serialize.instruction");
+#else
+# define ia64_dv_serialize_data()
+# define ia64_dv_serialize_instruction()
+#endif
+
+#define ia64_nop(x) asm volatile ("nop %0"::"i"(x));
+
+#define ia64_itci(addr) asm volatile ("itc.i %0;;" :: "r"(addr) : "memory")
+
+#define ia64_itcd(addr) asm volatile ("itc.d %0;;" :: "r"(addr) : "memory")
+
+
+#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1" \
+ :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1" \
+ :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_tpa(addr) \
+({ \
+ __u64 ia64_pa; \
+ asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory"); \
+ ia64_pa; \
+})
+
+#define __ia64_set_dbr(index, val) \
+ asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_ibr(index, val) \
+ asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pkr(index, val) \
+ asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmc(index, val) \
+ asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmd(index, val) \
+ asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_rr(index, val) \
+ asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory");
+
+#define ia64_get_cpuid(index) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index)); \
+ ia64_intri_res; \
+})
+
+#define __ia64_get_dbr(index) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \
+ ia64_intri_res; \
+})
+
+#define ia64_get_ibr(index) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \
+ ia64_intri_res; \
+})
+
+#define ia64_get_pkr(index) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \
+ ia64_intri_res; \
+})
+
+#define ia64_get_pmc(index) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index)); \
+ ia64_intri_res; \
+})
+
+
+#define ia64_get_pmd(index) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index)); \
+ ia64_intri_res; \
+})
+
+#define ia64_get_rr(index) \
+({ \
+ __u64 ia64_intri_res; \
+ asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index)); \
+ ia64_intri_res; \
+})
+
+#define ia64_fc(addr) asm volatile ("fc %0" :: "r"(addr) : "memory")
+
+
+#define ia64_sync_i() asm volatile (";; sync.i" ::: "memory")
+
+#define ia64_ssm(mask) asm volatile ("ssm %0":: "i"((mask)) : "memory")
+#define ia64_rsm(mask) asm volatile ("rsm %0":: "i"((mask)) : "memory")
+#define ia64_sum(mask) asm volatile ("sum %0":: "i"((mask)) : "memory")
+#define ia64_rum(mask) asm volatile ("rum %0":: "i"((mask)) : "memory")
+
+#define ia64_ptce(addr) asm volatile ("ptc.e %0" :: "r"(addr))
+
+#define ia64_ptcga(addr, size) \
+do { \
+ asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory"); \
+ ia64_dv_serialize_data(); \
+} while (0)
+
+#define ia64_ptcl(addr, size) \
+do { \
+ asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory"); \
+ ia64_dv_serialize_data(); \
+} while (0)
+
+#define ia64_ptri(addr, size) \
+ asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+#define ia64_ptrd(addr, size) \
+ asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */
+
+#define ia64_lfhint_none 0
+#define ia64_lfhint_nt1 1
+#define ia64_lfhint_nt2 2
+#define ia64_lfhint_nta 3
+
+#define ia64_lfetch(lfhint, y) \
+({ \
+ switch (lfhint) { \
+ case ia64_lfhint_none: \
+ asm volatile ("lfetch [%0]" : : "r"(y)); \
+ break; \
+ case ia64_lfhint_nt1: \
+ asm volatile ("lfetch.nt1 [%0]" : : "r"(y)); \
+ break; \
+ case ia64_lfhint_nt2: \
+ asm volatile ("lfetch.nt2 [%0]" : : "r"(y)); \
+ break; \
+ case ia64_lfhint_nta: \
+ asm volatile ("lfetch.nta [%0]" : : "r"(y)); \
+ break; \
+ } \
+})
+
+#define ia64_lfetch_excl(lfhint, y) \
+({ \
+ switch (lfhint) { \
+ case ia64_lfhint_none: \
+ asm volatile ("lfetch.excl [%0]" :: "r"(y)); \
+ break; \
+ case ia64_lfhint_nt1: \
+ asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y)); \
+ break; \
+ case ia64_lfhint_nt2: \
+ asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y)); \
+ break; \
+ case ia64_lfhint_nta: \
+ asm volatile ("lfetch.excl.nta [%0]" :: "r"(y)); \
+ break; \
+ } \
+})
+
+#define ia64_lfetch_fault(lfhint, y) \
+({ \
+ switch (lfhint) { \
+ case ia64_lfhint_none: \
+ asm volatile ("lfetch.fault [%0]" : : "r"(y)); \
+ break; \
+ case ia64_lfhint_nt1: \
+ asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y)); \
+ break; \
+ case ia64_lfhint_nt2: \
+ asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y)); \
+ break; \
+ case ia64_lfhint_nta: \
+ asm volatile ("lfetch.fault.nta [%0]" : : "r"(y)); \
+ break; \
+ } \
+})
+
+#define ia64_lfetch_fault_excl(lfhint, y) \
+({ \
+ switch (lfhint) { \
+ case ia64_lfhint_none: \
+ asm volatile ("lfetch.fault.excl [%0]" :: "r"(y)); \
+ break; \
+ case ia64_lfhint_nt1: \
+ asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y)); \
+ break; \
+ case ia64_lfhint_nt2: \
+ asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y)); \
+ break; \
+ case ia64_lfhint_nta: \
+ asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y)); \
+ break; \
+ } \
+})
+
+#define ia64_intrin_local_irq_restore(x) \
+do { \
+ asm volatile (";; cmp.ne p6,p7=%0,r0;;" \
+ "(p6) ssm psr.i;" \
+ "(p7) rsm psr.i;;" \
+ "(p6) srlz.d" \
+ :: "r"((x)) : "p6", "p7", "memory"); \
+} while (0)
+
+#endif /* _ASM_IA64_GCC_INTRIN_H */
diff --git a/include/asm-ia64/hardirq.h b/include/asm-ia64/hardirq.h
new file mode 100644
index 0000000..33ef8f0
--- /dev/null
+++ b/include/asm-ia64/hardirq.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_HARDIRQ_H
+#define _ASM_IA64_HARDIRQ_H
+
+/*
+ * Modified 1998-2002, 2004 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+#include <asm/processor.h>
+
+/*
+ * No irq_cpustat_t for IA-64. The data is held in the per-CPU data structure.
+ */
+
+#define __ARCH_IRQ_STAT 1
+
+#define local_softirq_pending() (local_cpu_data->softirq_pending)
+
+#define HARDIRQ_BITS 14
+
+/*
+ * The hardirq mask has to be large enough to have space for potentially all IRQ sources
+ * in the system nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+extern void __iomem *ipi_base_addr;
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_IA64_HARDIRQ_H */
diff --git a/include/asm-ia64/hdreg.h b/include/asm-ia64/hdreg.h
new file mode 100644
index 0000000..83b5161
--- /dev/null
+++ b/include/asm-ia64/hdreg.h
@@ -0,0 +1,14 @@
+/*
+ * linux/include/asm-ia64/hdreg.h
+ *
+ * Copyright (C) 1994-1996 Linus Torvalds & authors
+ */
+
+#warning this file is obsolete, please do not use it
+
+#ifndef __ASM_IA64_HDREG_H
+#define __ASM_IA64_HDREG_H
+
+typedef unsigned short ide_ioreg_t;
+
+#endif /* __ASM_IA64_HDREG_H */
diff --git a/include/asm-ia64/hw_irq.h b/include/asm-ia64/hw_irq.h
new file mode 100644
index 0000000..041ab8c
--- /dev/null
+++ b/include/asm-ia64/hw_irq.h
@@ -0,0 +1,144 @@
+#ifndef _ASM_IA64_HW_IRQ_H
+#define _ASM_IA64_HW_IRQ_H
+
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/profile.h>
+
+#include <asm/machvec.h>
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+
+typedef u8 ia64_vector;
+
+/*
+ * 0 special
+ *
+ * 1,3-14 are reserved from firmware
+ *
+ * 16-255 (vectored external interrupts) are available
+ *
+ * 15 spurious interrupt (see IVR)
+ *
+ * 16 lowest priority, 255 highest priority
+ *
+ * 15 classes of 16 interrupts each.
+ */
+#define IA64_MIN_VECTORED_IRQ 16
+#define IA64_MAX_VECTORED_IRQ 255
+#define IA64_NUM_VECTORS 256
+
+#define AUTO_ASSIGN -1
+
+#define IA64_SPURIOUS_INT_VECTOR 0x0f
+
+/*
+ * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI.
+ */
+#define IA64_CPEP_VECTOR 0x1c /* corrected platform error polling vector */
+#define IA64_CMCP_VECTOR 0x1d /* corrected machine-check polling vector */
+#define IA64_CPE_VECTOR 0x1e /* corrected platform error interrupt vector */
+#define IA64_CMC_VECTOR 0x1f /* corrected machine-check interrupt vector */
+/*
+ * Vectors 0x20-0x2f are reserved for legacy ISA IRQs.
+ */
+#define IA64_FIRST_DEVICE_VECTOR 0x30
+#define IA64_LAST_DEVICE_VECTOR 0xe7
+#define IA64_NUM_DEVICE_VECTORS (IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
+
+#define IA64_MCA_RENDEZ_VECTOR 0xe8 /* MCA rendez interrupt */
+#define IA64_PERFMON_VECTOR 0xee /* performanc monitor interrupt vector */
+#define IA64_TIMER_VECTOR 0xef /* use highest-prio group 15 interrupt for timer */
+#define IA64_MCA_WAKEUP_VECTOR 0xf0 /* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
+#define IA64_IPI_RESCHEDULE 0xfd /* SMP reschedule */
+#define IA64_IPI_VECTOR 0xfe /* inter-processor interrupt vector */
+
+/* Used for encoding redirected irqs */
+
+#define IA64_IRQ_REDIRECTED (1 << 31)
+
+/* IA64 inter-cpu interrupt related definitions */
+
+#define IA64_IPI_DEFAULT_BASE_ADDR 0xfee00000
+
+/* Delivery modes for inter-cpu interrupts */
+enum {
+ IA64_IPI_DM_INT = 0x0, /* pend an external interrupt */
+ IA64_IPI_DM_PMI = 0x2, /* pend a PMI */
+ IA64_IPI_DM_NMI = 0x4, /* pend an NMI (vector 2) */
+ IA64_IPI_DM_INIT = 0x5, /* pend an INIT interrupt */
+ IA64_IPI_DM_EXTINT = 0x7, /* pend an 8259-compatible interrupt. */
+};
+
+extern __u8 isa_irq_to_vector_map[16];
+#define isa_irq_to_vector(x) isa_irq_to_vector_map[(x)]
+
+extern struct hw_interrupt_type irq_type_ia64_lsapic; /* CPU-internal interrupt controller */
+
+extern int assign_irq_vector (int irq); /* allocate a free vector */
+extern void free_irq_vector (int vector);
+extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
+extern void register_percpu_irq (ia64_vector vec, struct irqaction *action);
+
+static inline void
+hw_resend_irq (struct hw_interrupt_type *h, unsigned int vector)
+{
+ platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
+}
+
+/*
+ * Default implementations for the irq-descriptor API:
+ */
+
+extern irq_desc_t irq_desc[NR_IRQS];
+
+#ifndef CONFIG_IA64_GENERIC
+static inline unsigned int
+__ia64_local_vector_to_irq (ia64_vector vec)
+{
+ return (unsigned int) vec;
+}
+#endif
+
+/*
+ * Next follows the irq descriptor interface. On IA-64, each CPU supports 256 interrupt
+ * vectors. On smaller systems, there is a one-to-one correspondence between interrupt
+ * vectors and the Linux irq numbers. However, larger systems may have multiple interrupt
+ * domains meaning that the translation from vector number to irq number depends on the
+ * interrupt domain that a CPU belongs to. This API abstracts such platform-dependent
+ * differences and provides a uniform means to translate between vector and irq numbers
+ * and to obtain the irq descriptor for a given irq number.
+ */
+
+/* Return a pointer to the irq descriptor for IRQ. */
+static inline irq_desc_t *
+irq_descp (int irq)
+{
+ return irq_desc + irq;
+}
+
+/* Extract the IA-64 vector that corresponds to IRQ. */
+static inline ia64_vector
+irq_to_vector (int irq)
+{
+ return (ia64_vector) irq;
+}
+
+/*
+ * Convert the local IA-64 vector to the corresponding irq number. This translation is
+ * done in the context of the interrupt domain that the currently executing CPU belongs
+ * to.
+ */
+static inline unsigned int
+local_vector_to_irq (ia64_vector vec)
+{
+ return platform_local_vector_to_irq(vec);
+}
+
+#endif /* _ASM_IA64_HW_IRQ_H */
diff --git a/include/asm-ia64/ia32.h b/include/asm-ia64/ia32.h
new file mode 100644
index 0000000..8e746b2
--- /dev/null
+++ b/include/asm-ia64/ia32.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_IA32_H
+#define _ASM_IA64_IA32_H
+
+#include <linux/config.h>
+
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+
+#define IA32_NR_syscalls 285 /* length of syscall table */
+#define IA32_PAGE_SHIFT 12 /* 4KB pages */
+
+#ifndef __ASSEMBLY__
+
+# ifdef CONFIG_IA32_SUPPORT
+
+extern void ia32_cpu_init (void);
+extern void ia32_mem_init (void);
+extern void ia32_gdt_init (void);
+extern int ia32_exception (struct pt_regs *regs, unsigned long isr);
+extern int ia32_intercept (struct pt_regs *regs, unsigned long isr);
+extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs);
+
+# endif /* !CONFIG_IA32_SUPPORT */
+
+/* Declare this unconditionally, so we don't get warnings for unreachable code. */
+extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs);
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+extern int ia32_copy_partial_page_list (struct task_struct *, unsigned long);
+extern void ia32_drop_partial_page_list (struct task_struct *);
+#else
+# define ia32_copy_partial_page_list(a1, a2) 0
+# define ia32_drop_partial_page_list(a1) do { ; } while (0)
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_IA32_H */
diff --git a/include/asm-ia64/ia64regs.h b/include/asm-ia64/ia64regs.h
new file mode 100644
index 0000000..1757f1c
--- /dev/null
+++ b/include/asm-ia64/ia64regs.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2002,2003 Intel Corp.
+ * Jun Nakajima <jun.nakajima@intel.com>
+ * Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#ifndef _ASM_IA64_IA64REGS_H
+#define _ASM_IA64_IA64REGS_H
+
+/*
+ * Register Names for getreg() and setreg().
+ *
+ * The "magic" numbers happen to match the values used by the Intel compiler's
+ * getreg()/setreg() intrinsics.
+ */
+
+/* Special Registers */
+
+#define _IA64_REG_IP 1016 /* getreg only */
+#define _IA64_REG_PSR 1019
+#define _IA64_REG_PSR_L 1019
+
+/* General Integer Registers */
+
+#define _IA64_REG_GP 1025 /* R1 */
+#define _IA64_REG_R8 1032 /* R8 */
+#define _IA64_REG_R9 1033 /* R9 */
+#define _IA64_REG_SP 1036 /* R12 */
+#define _IA64_REG_TP 1037 /* R13 */
+
+/* Application Registers */
+
+#define _IA64_REG_AR_KR0 3072
+#define _IA64_REG_AR_KR1 3073
+#define _IA64_REG_AR_KR2 3074
+#define _IA64_REG_AR_KR3 3075
+#define _IA64_REG_AR_KR4 3076
+#define _IA64_REG_AR_KR5 3077
+#define _IA64_REG_AR_KR6 3078
+#define _IA64_REG_AR_KR7 3079
+#define _IA64_REG_AR_RSC 3088
+#define _IA64_REG_AR_BSP 3089
+#define _IA64_REG_AR_BSPSTORE 3090
+#define _IA64_REG_AR_RNAT 3091
+#define _IA64_REG_AR_FCR 3093
+#define _IA64_REG_AR_EFLAG 3096
+#define _IA64_REG_AR_CSD 3097
+#define _IA64_REG_AR_SSD 3098
+#define _IA64_REG_AR_CFLAG 3099
+#define _IA64_REG_AR_FSR 3100
+#define _IA64_REG_AR_FIR 3101
+#define _IA64_REG_AR_FDR 3102
+#define _IA64_REG_AR_CCV 3104
+#define _IA64_REG_AR_UNAT 3108
+#define _IA64_REG_AR_FPSR 3112
+#define _IA64_REG_AR_ITC 3116
+#define _IA64_REG_AR_PFS 3136
+#define _IA64_REG_AR_LC 3137
+#define _IA64_REG_AR_EC 3138
+
+/* Control Registers */
+
+#define _IA64_REG_CR_DCR 4096
+#define _IA64_REG_CR_ITM 4097
+#define _IA64_REG_CR_IVA 4098
+#define _IA64_REG_CR_PTA 4104
+#define _IA64_REG_CR_IPSR 4112
+#define _IA64_REG_CR_ISR 4113
+#define _IA64_REG_CR_IIP 4115
+#define _IA64_REG_CR_IFA 4116
+#define _IA64_REG_CR_ITIR 4117
+#define _IA64_REG_CR_IIPA 4118
+#define _IA64_REG_CR_IFS 4119
+#define _IA64_REG_CR_IIM 4120
+#define _IA64_REG_CR_IHA 4121
+#define _IA64_REG_CR_LID 4160
+#define _IA64_REG_CR_IVR 4161 /* getreg only */
+#define _IA64_REG_CR_TPR 4162
+#define _IA64_REG_CR_EOI 4163
+#define _IA64_REG_CR_IRR0 4164 /* getreg only */
+#define _IA64_REG_CR_IRR1 4165 /* getreg only */
+#define _IA64_REG_CR_IRR2 4166 /* getreg only */
+#define _IA64_REG_CR_IRR3 4167 /* getreg only */
+#define _IA64_REG_CR_ITV 4168
+#define _IA64_REG_CR_PMV 4169
+#define _IA64_REG_CR_CMCV 4170
+#define _IA64_REG_CR_LRR0 4176
+#define _IA64_REG_CR_LRR1 4177
+
+/* Indirect Registers for getindreg() and setindreg() */
+
+#define _IA64_REG_INDR_CPUID 9000 /* getindreg only */
+#define _IA64_REG_INDR_DBR 9001
+#define _IA64_REG_INDR_IBR 9002
+#define _IA64_REG_INDR_PKR 9003
+#define _IA64_REG_INDR_PMC 9004
+#define _IA64_REG_INDR_PMD 9005
+#define _IA64_REG_INDR_RR 9006
+
+#endif /* _ASM_IA64_IA64REGS_H */
diff --git a/include/asm-ia64/ide.h b/include/asm-ia64/ide.h
new file mode 100644
index 0000000..e62b953
--- /dev/null
+++ b/include/asm-ia64/ide.h
@@ -0,0 +1,71 @@
+/*
+ * linux/include/asm-ia64/ide.h
+ *
+ * Copyright (C) 1994-1996 Linus Torvalds & authors
+ */
+
+/*
+ * This file contains the ia64 architecture specific IDE code.
+ */
+
+#ifndef __ASM_IA64_IDE_H
+#define __ASM_IA64_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#include <linux/irq.h>
+
+#ifndef MAX_HWIFS
+# ifdef CONFIG_PCI
+#define MAX_HWIFS 10
+# else
+#define MAX_HWIFS 6
+# endif
+#endif
+
+#define IDE_ARCH_OBSOLETE_DEFAULTS
+
+static inline int ide_default_irq(unsigned long base)
+{
+ switch (base) {
+ case 0x1f0: return isa_irq_to_vector(14);
+ case 0x170: return isa_irq_to_vector(15);
+ case 0x1e8: return isa_irq_to_vector(11);
+ case 0x168: return isa_irq_to_vector(10);
+ case 0x1e0: return isa_irq_to_vector(8);
+ case 0x160: return isa_irq_to_vector(12);
+ default:
+ return 0;
+ }
+}
+
+static inline unsigned long ide_default_io_base(int index)
+{
+ switch (index) {
+ case 0: return 0x1f0;
+ case 1: return 0x170;
+ case 2: return 0x1e8;
+ case 3: return 0x168;
+ case 4: return 0x1e0;
+ case 5: return 0x160;
+ default:
+ return 0;
+ }
+}
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
+
+#ifdef CONFIG_PCI
+#define ide_init_default_irq(base) (0)
+#else
+#define ide_init_default_irq(base) ide_default_irq(base)
+#endif
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_IA64_IDE_H */
diff --git a/include/asm-ia64/intel_intrin.h b/include/asm-ia64/intel_intrin.h
new file mode 100644
index 0000000..a7122d8
--- /dev/null
+++ b/include/asm-ia64/intel_intrin.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_IA64_INTEL_INTRIN_H
+#define _ASM_IA64_INTEL_INTRIN_H
+/*
+ * Intel Compiler Intrinsics
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ *
+ */
+#include <asm/types.h>
+
+void __lfetch(int lfhint, void *y);
+void __lfetch_excl(int lfhint, void *y);
+void __lfetch_fault(int lfhint, void *y);
+void __lfetch_fault_excl(int lfhint, void *y);
+
+/* In the following, whichFloatReg should be an integer from 0-127 */
+void __ldfs(const int whichFloatReg, void *src);
+void __ldfd(const int whichFloatReg, void *src);
+void __ldfe(const int whichFloatReg, void *src);
+void __ldf8(const int whichFloatReg, void *src);
+void __ldf_fill(const int whichFloatReg, void *src);
+void __stfs(void *dst, const int whichFloatReg);
+void __stfd(void *dst, const int whichFloatReg);
+void __stfe(void *dst, const int whichFloatReg);
+void __stf8(void *dst, const int whichFloatReg);
+void __stf_spill(void *dst, const int whichFloatReg);
+
+void __st1_rel(void *dst, const __s8 value);
+void __st2_rel(void *dst, const __s16 value);
+void __st4_rel(void *dst, const __s32 value);
+void __st8_rel(void *dst, const __s64 value);
+__u8 __ld1_acq(void *src);
+__u16 __ld2_acq(void *src);
+__u32 __ld4_acq(void *src);
+__u64 __ld8_acq(void *src);
+
+__u64 __fetchadd4_acq(__u32 *addend, const int increment);
+__u64 __fetchadd4_rel(__u32 *addend, const int increment);
+__u64 __fetchadd8_acq(__u64 *addend, const int increment);
+__u64 __fetchadd8_rel(__u64 *addend, const int increment);
+
+__u64 __getf_exp(double d);
+
+/* OS Related Itanium(R) Intrinsics */
+
+/* The names to use for whichReg and whichIndReg below come from
+ the include file asm/ia64regs.h */
+
+__u64 __getIndReg(const int whichIndReg, __s64 index);
+__u64 __getReg(const int whichReg);
+
+void __setIndReg(const int whichIndReg, __s64 index, __u64 value);
+void __setReg(const int whichReg, __u64 value);
+
+void __mf(void);
+void __mfa(void);
+void __synci(void);
+void __itcd(__s64 pa);
+void __itci(__s64 pa);
+void __itrd(__s64 whichTransReg, __s64 pa);
+void __itri(__s64 whichTransReg, __s64 pa);
+void __ptce(__s64 va);
+void __ptcl(__s64 va, __s64 pagesz);
+void __ptcg(__s64 va, __s64 pagesz);
+void __ptcga(__s64 va, __s64 pagesz);
+void __ptri(__s64 va, __s64 pagesz);
+void __ptrd(__s64 va, __s64 pagesz);
+void __invala (void);
+void __invala_gr(const int whichGeneralReg /* 0-127 */ );
+void __invala_fr(const int whichFloatReg /* 0-127 */ );
+void __nop(const int);
+void __fc(__u64 *addr);
+void __sum(int mask);
+void __rum(int mask);
+void __ssm(int mask);
+void __rsm(int mask);
+__u64 __thash(__s64);
+__u64 __ttag(__s64);
+__s64 __tpa(__s64);
+
+/* Intrinsics for implementing get/put_user macros */
+void __st_user(const char *tableName, __u64 addr, char size, char relocType, __u64 val);
+void __ld_user(const char *tableName, __u64 addr, char size, char relocType);
+
+/* This intrinsic does not generate code, it creates a barrier across which
+ * the compiler will not schedule data access instructions.
+ */
+void __memory_barrier(void);
+
+void __isrlz(void);
+void __dsrlz(void);
+
+__u64 _m64_mux1(__u64 a, const int n);
+__u64 __thash(__u64);
+
+/* Lock and Atomic Operation Related Intrinsics */
+__u64 _InterlockedExchange8(volatile __u8 *trgt, __u8 value);
+__u64 _InterlockedExchange16(volatile __u16 *trgt, __u16 value);
+__s64 _InterlockedExchange(volatile __u32 *trgt, __u32 value);
+__s64 _InterlockedExchange64(volatile __u64 *trgt, __u64 value);
+
+__u64 _InterlockedCompareExchange8_rel(volatile __u8 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange8_acq(volatile __u8 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange16_rel(volatile __u16 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange16_acq(volatile __u16 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange_rel(volatile __u32 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange_acq(volatile __u32 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange64_rel(volatile __u64 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange64_acq(volatile __u64 *dest, __u64 xchg, __u64 comp);
+
+__s64 _m64_dep_mi(const int v, __s64 s, const int p, const int len);
+__s64 _m64_shrp(__s64 a, __s64 b, const int count);
+__s64 _m64_popcnt(__s64 a);
+
+#define ia64_barrier() __memory_barrier()
+
+#define ia64_stop() /* Nothing: As of now stop bit is generated for each
+ * intrinsic
+ */
+
+#define ia64_getreg __getReg
+#define ia64_setreg __setReg
+
+#define ia64_hint(x)
+
+#define ia64_mux1_brcst 0
+#define ia64_mux1_mix 8
+#define ia64_mux1_shuf 9
+#define ia64_mux1_alt 10
+#define ia64_mux1_rev 11
+
+#define ia64_mux1 _m64_mux1
+#define ia64_popcnt _m64_popcnt
+#define ia64_getf_exp __getf_exp
+#define ia64_shrp _m64_shrp
+
+#define ia64_tpa __tpa
+#define ia64_invala __invala
+#define ia64_invala_gr __invala_gr
+#define ia64_invala_fr __invala_fr
+#define ia64_nop __nop
+#define ia64_sum __sum
+#define ia64_ssm __ssm
+#define ia64_rum __rum
+#define ia64_rsm __rsm
+#define ia64_fc __fc
+
+#define ia64_ldfs __ldfs
+#define ia64_ldfd __ldfd
+#define ia64_ldfe __ldfe
+#define ia64_ldf8 __ldf8
+#define ia64_ldf_fill __ldf_fill
+
+#define ia64_stfs __stfs
+#define ia64_stfd __stfd
+#define ia64_stfe __stfe
+#define ia64_stf8 __stf8
+#define ia64_stf_spill __stf_spill
+
+#define ia64_mf __mf
+#define ia64_mfa __mfa
+
+#define ia64_fetchadd4_acq __fetchadd4_acq
+#define ia64_fetchadd4_rel __fetchadd4_rel
+#define ia64_fetchadd8_acq __fetchadd8_acq
+#define ia64_fetchadd8_rel __fetchadd8_rel
+
+#define ia64_xchg1 _InterlockedExchange8
+#define ia64_xchg2 _InterlockedExchange16
+#define ia64_xchg4 _InterlockedExchange
+#define ia64_xchg8 _InterlockedExchange64
+
+#define ia64_cmpxchg1_rel _InterlockedCompareExchange8_rel
+#define ia64_cmpxchg1_acq _InterlockedCompareExchange8_acq
+#define ia64_cmpxchg2_rel _InterlockedCompareExchange16_rel
+#define ia64_cmpxchg2_acq _InterlockedCompareExchange16_acq
+#define ia64_cmpxchg4_rel _InterlockedCompareExchange_rel
+#define ia64_cmpxchg4_acq _InterlockedCompareExchange_acq
+#define ia64_cmpxchg8_rel _InterlockedCompareExchange64_rel
+#define ia64_cmpxchg8_acq _InterlockedCompareExchange64_acq
+
+#define __ia64_set_dbr(index, val) \
+ __setIndReg(_IA64_REG_INDR_DBR, index, val)
+#define ia64_set_ibr(index, val) \
+ __setIndReg(_IA64_REG_INDR_IBR, index, val)
+#define ia64_set_pkr(index, val) \
+ __setIndReg(_IA64_REG_INDR_PKR, index, val)
+#define ia64_set_pmc(index, val) \
+ __setIndReg(_IA64_REG_INDR_PMC, index, val)
+#define ia64_set_pmd(index, val) \
+ __setIndReg(_IA64_REG_INDR_PMD, index, val)
+#define ia64_set_rr(index, val) \
+ __setIndReg(_IA64_REG_INDR_RR, index, val)
+
+#define ia64_get_cpuid(index) __getIndReg(_IA64_REG_INDR_CPUID, index)
+#define __ia64_get_dbr(index) __getIndReg(_IA64_REG_INDR_DBR, index)
+#define ia64_get_ibr(index) __getIndReg(_IA64_REG_INDR_IBR, index)
+#define ia64_get_pkr(index) __getIndReg(_IA64_REG_INDR_PKR, index)
+#define ia64_get_pmc(index) __getIndReg(_IA64_REG_INDR_PMC, index)
+#define ia64_get_pmd(index) __getIndReg(_IA64_REG_INDR_PMD, index)
+#define ia64_get_rr(index) __getIndReg(_IA64_REG_INDR_RR, index)
+
+#define ia64_srlz_d __dsrlz
+#define ia64_srlz_i __isrlz
+
+#define ia64_dv_serialize_data()
+#define ia64_dv_serialize_instruction()
+
+#define ia64_st1_rel __st1_rel
+#define ia64_st2_rel __st2_rel
+#define ia64_st4_rel __st4_rel
+#define ia64_st8_rel __st8_rel
+
+#define ia64_ld1_acq __ld1_acq
+#define ia64_ld2_acq __ld2_acq
+#define ia64_ld4_acq __ld4_acq
+#define ia64_ld8_acq __ld8_acq
+
+#define ia64_sync_i __synci
+#define ia64_thash __thash
+#define ia64_ttag __ttag
+#define ia64_itcd __itcd
+#define ia64_itci __itci
+#define ia64_itrd __itrd
+#define ia64_itri __itri
+#define ia64_ptce __ptce
+#define ia64_ptcl __ptcl
+#define ia64_ptcg __ptcg
+#define ia64_ptcga __ptcga
+#define ia64_ptri __ptri
+#define ia64_ptrd __ptrd
+#define ia64_dep_mi _m64_dep_mi
+
+/* Values for lfhint in __lfetch and __lfetch_fault */
+
+#define ia64_lfhint_none 0
+#define ia64_lfhint_nt1 1
+#define ia64_lfhint_nt2 2
+#define ia64_lfhint_nta 3
+
+#define ia64_lfetch __lfetch
+#define ia64_lfetch_excl __lfetch_excl
+#define ia64_lfetch_fault __lfetch_fault
+#define ia64_lfetch_fault_excl __lfetch_fault_excl
+
+#define ia64_intrin_local_irq_restore(x) \
+do { \
+ if ((x) != 0) { \
+ ia64_ssm(IA64_PSR_I); \
+ ia64_srlz_d(); \
+ } else { \
+ ia64_rsm(IA64_PSR_I); \
+ } \
+} while (0)
+
+#endif /* _ASM_IA64_INTEL_INTRIN_H */
diff --git a/include/asm-ia64/intrinsics.h b/include/asm-ia64/intrinsics.h
new file mode 100644
index 0000000..8089f95
--- /dev/null
+++ b/include/asm-ia64/intrinsics.h
@@ -0,0 +1,181 @@
+#ifndef _ASM_IA64_INTRINSICS_H
+#define _ASM_IA64_INTRINSICS_H
+
+/*
+ * Compiler-dependent intrinsics.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+
+/* include compiler specific intrinsics */
+#include <asm/ia64regs.h>
+#ifdef __INTEL_COMPILER
+# include <asm/intel_intrin.h>
+#else
+# include <asm/gcc_intrin.h>
+#endif
+
+/*
+ * Force an unresolved reference if someone tries to use
+ * ia64_fetch_and_add() with a bad value.
+ */
+extern unsigned long __bad_size_for_ia64_fetch_and_add (void);
+extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
+
+#define IA64_FETCHADD(tmp,v,n,sz,sem) \
+({ \
+ switch (sz) { \
+ case 4: \
+ tmp = ia64_fetchadd4_##sem((unsigned int *) v, n); \
+ break; \
+ \
+ case 8: \
+ tmp = ia64_fetchadd8_##sem((unsigned long *) v, n); \
+ break; \
+ \
+ default: \
+ __bad_size_for_ia64_fetch_and_add(); \
+ } \
+})
+
+#define ia64_fetchadd(i,v,sem) \
+({ \
+ __u64 _tmp; \
+ volatile __typeof__(*(v)) *_v = (v); \
+ /* Can't use a switch () here: gcc isn't always smart enough for that... */ \
+ if ((i) == -16) \
+ IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem); \
+ else if ((i) == -8) \
+ IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem); \
+ else if ((i) == -4) \
+ IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem); \
+ else if ((i) == -1) \
+ IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem); \
+ else if ((i) == 1) \
+ IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem); \
+ else if ((i) == 4) \
+ IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem); \
+ else if ((i) == 8) \
+ IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem); \
+ else if ((i) == 16) \
+ IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem); \
+ else \
+ _tmp = __bad_increment_for_ia64_fetch_and_add(); \
+ (__typeof__(*(v))) (_tmp); /* return old value */ \
+})
+
+#define ia64_fetch_and_add(i,v) (ia64_fetchadd(i, v, rel) + (i)) /* return new value */
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalid xchg().
+ */
+extern void ia64_xchg_called_with_bad_pointer (void);
+
+#define __xchg(x,ptr,size) \
+({ \
+ unsigned long __xchg_result; \
+ \
+ switch (size) { \
+ case 1: \
+ __xchg_result = ia64_xchg1((__u8 *)ptr, x); \
+ break; \
+ \
+ case 2: \
+ __xchg_result = ia64_xchg2((__u16 *)ptr, x); \
+ break; \
+ \
+ case 4: \
+ __xchg_result = ia64_xchg4((__u32 *)ptr, x); \
+ break; \
+ \
+ case 8: \
+ __xchg_result = ia64_xchg8((__u64 *)ptr, x); \
+ break; \
+ default: \
+ ia64_xchg_called_with_bad_pointer(); \
+ } \
+ __xchg_result; \
+})
+
+#define xchg(ptr,x) \
+ ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
+
+/*
+ * Atomic compare and exchange. Compare OLD with MEM, if identical,
+ * store NEW in MEM. Return the initial value in MEM. Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern long ia64_cmpxchg_called_with_bad_pointer (void);
+
+#define ia64_cmpxchg(sem,ptr,old,new,size) \
+({ \
+ __u64 _o_, _r_; \
+ \
+ switch (size) { \
+ case 1: _o_ = (__u8 ) (long) (old); break; \
+ case 2: _o_ = (__u16) (long) (old); break; \
+ case 4: _o_ = (__u32) (long) (old); break; \
+ case 8: _o_ = (__u64) (long) (old); break; \
+ default: break; \
+ } \
+ switch (size) { \
+ case 1: \
+ _r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_); \
+ break; \
+ \
+ case 2: \
+ _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_); \
+ break; \
+ \
+ case 4: \
+ _r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_); \
+ break; \
+ \
+ case 8: \
+ _r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_); \
+ break; \
+ \
+ default: \
+ _r_ = ia64_cmpxchg_called_with_bad_pointer(); \
+ break; \
+ } \
+ (__typeof__(old)) _r_; \
+})
+
+#define cmpxchg_acq(ptr,o,n) ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
+#define cmpxchg_rel(ptr,o,n) ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
+
+/* for compatibility with other platforms: */
+#define cmpxchg(ptr,o,n) cmpxchg_acq(ptr,o,n)
+
+#ifdef CONFIG_IA64_DEBUG_CMPXCHG
+# define CMPXCHG_BUGCHECK_DECL int _cmpxchg_bugcheck_count = 128;
+# define CMPXCHG_BUGCHECK(v) \
+ do { \
+ if (_cmpxchg_bugcheck_count-- <= 0) { \
+ void *ip; \
+ extern int printk(const char *fmt, ...); \
+ ip = (void *) ia64_getreg(_IA64_REG_IP); \
+ printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v)); \
+ break; \
+ } \
+ } while (0)
+#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
+# define CMPXCHG_BUGCHECK_DECL
+# define CMPXCHG_BUGCHECK(v)
+#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
+
+#endif
+#endif /* _ASM_IA64_INTRINSICS_H */
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
new file mode 100644
index 0000000..491e9d1
--- /dev/null
+++ b/include/asm-ia64/io.h
@@ -0,0 +1,484 @@
+#ifndef _ASM_IA64_IO_H
+#define _ASM_IA64_IO_H
+
+/*
+ * This file contains the definitions for the emulated IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated to
+ * (a) handle it all in a way that makes gcc able to optimize it as
+ * well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+/* We don't use IO slowdowns on the ia64, but.. */
+#define __SLOW_DOWN_IO do { } while (0)
+#define SLOW_DOWN_IO do { } while (0)
+
+#define __IA64_UNCACHED_OFFSET 0xc000000000000000UL /* region 6 */
+
+/*
+ * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but
+ * large machines may have multiple other I/O spaces so we can't place any a priori limit
+ * on IO_SPACE_LIMIT. These additional spaces are described in ACPI.
+ */
+#define IO_SPACE_LIMIT 0xffffffffffffffffUL
+
+#define MAX_IO_SPACES_BITS 4
+#define MAX_IO_SPACES (1UL << MAX_IO_SPACES_BITS)
+#define IO_SPACE_BITS 24
+#define IO_SPACE_SIZE (1UL << IO_SPACE_BITS)
+
+#define IO_SPACE_NR(port) ((port) >> IO_SPACE_BITS)
+#define IO_SPACE_BASE(space) ((space) << IO_SPACE_BITS)
+#define IO_SPACE_PORT(port) ((port) & (IO_SPACE_SIZE - 1))
+
+#define IO_SPACE_SPARSE_ENCODING(p) ((((p) >> 2) << 12) | (p & 0xfff))
+
+struct io_space {
+ unsigned long mmio_base; /* base in MMIO space */
+ int sparse;
+};
+
+extern struct io_space io_space[];
+extern unsigned int num_io_spaces;
+
+# ifdef __KERNEL__
+
+/*
+ * All MMIO iomem cookies are in region 6; anything less is a PIO cookie:
+ * 0xCxxxxxxxxxxxxxxx MMIO cookie (return from ioremap)
+ * 0x000000001SPPPPPP PIO cookie (S=space number, P..P=port)
+ *
+ * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch
+ * code that uses bare port numbers without the prerequisite pci_iomap().
+ */
+#define PIO_OFFSET (1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS))
+#define PIO_MASK (PIO_OFFSET - 1)
+#define PIO_RESERVED __IA64_UNCACHED_OFFSET
+#define HAVE_ARCH_PIO_SIZE
+
+#include <asm/intrinsics.h>
+#include <asm/machvec.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm-generic/iomap.h>
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+static inline unsigned long
+virt_to_phys (volatile void *address)
+{
+ return (unsigned long) address - PAGE_OFFSET;
+}
+
+static inline void*
+phys_to_virt (unsigned long address)
+{
+ return (void *) (address + PAGE_OFFSET);
+}
+
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range (unsigned long addr, size_t *count); /* efi.c */
+
+/*
+ * The following two macros are deprecated and scheduled for removal.
+ * Please use the PCI-DMA interface defined in <asm/pci.h> instead.
+ */
+#define bus_to_virt phys_to_virt
+#define virt_to_bus virt_to_phys
+#define page_to_bus page_to_phys
+
+# endif /* KERNEL */
+
+/*
+ * Memory fence w/accept. This should never be used in code that is
+ * not IA-64 specific.
+ */
+#define __ia64_mf_a() ia64_mfa()
+
+/**
+ * ___ia64_mmiowb - I/O write barrier
+ *
+ * Ensure ordering of I/O space writes. This will make sure that writes
+ * following the barrier will arrive after all previous writes. For most
+ * ia64 platforms, this is a simple 'mf.a' instruction.
+ *
+ * See Documentation/DocBook/deviceiobook.tmpl for more information.
+ */
+static inline void ___ia64_mmiowb(void)
+{
+ ia64_mfa();
+}
+
+static inline const unsigned long
+__ia64_get_io_port_base (void)
+{
+ extern unsigned long ia64_iobase;
+
+ return ia64_iobase;
+}
+
+static inline void*
+__ia64_mk_io_addr (unsigned long port)
+{
+ struct io_space *space;
+ unsigned long offset;
+
+ space = &io_space[IO_SPACE_NR(port)];
+ port = IO_SPACE_PORT(port);
+ if (space->sparse)
+ offset = IO_SPACE_SPARSE_ENCODING(port);
+ else
+ offset = port;
+
+ return (void *) (space->mmio_base | offset);
+}
+
+#define __ia64_inb ___ia64_inb
+#define __ia64_inw ___ia64_inw
+#define __ia64_inl ___ia64_inl
+#define __ia64_outb ___ia64_outb
+#define __ia64_outw ___ia64_outw
+#define __ia64_outl ___ia64_outl
+#define __ia64_readb ___ia64_readb
+#define __ia64_readw ___ia64_readw
+#define __ia64_readl ___ia64_readl
+#define __ia64_readq ___ia64_readq
+#define __ia64_readb_relaxed ___ia64_readb
+#define __ia64_readw_relaxed ___ia64_readw
+#define __ia64_readl_relaxed ___ia64_readl
+#define __ia64_readq_relaxed ___ia64_readq
+#define __ia64_writeb ___ia64_writeb
+#define __ia64_writew ___ia64_writew
+#define __ia64_writel ___ia64_writel
+#define __ia64_writeq ___ia64_writeq
+#define __ia64_mmiowb ___ia64_mmiowb
+
+/*
+ * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure
+ * that the access has completed before executing other I/O accesses. Since we're doing
+ * the accesses through an uncachable (UC) translation, the CPU will execute them in
+ * program order. However, we still need to tell the compiler not to shuffle them around
+ * during optimization, which is why we use "volatile" pointers.
+ */
+
+static inline unsigned int
+___ia64_inb (unsigned long port)
+{
+ volatile unsigned char *addr = __ia64_mk_io_addr(port);
+ unsigned char ret;
+
+ ret = *addr;
+ __ia64_mf_a();
+ return ret;
+}
+
+static inline unsigned int
+___ia64_inw (unsigned long port)
+{
+ volatile unsigned short *addr = __ia64_mk_io_addr(port);
+ unsigned short ret;
+
+ ret = *addr;
+ __ia64_mf_a();
+ return ret;
+}
+
+static inline unsigned int
+___ia64_inl (unsigned long port)
+{
+ volatile unsigned int *addr = __ia64_mk_io_addr(port);
+ unsigned int ret;
+
+ ret = *addr;
+ __ia64_mf_a();
+ return ret;
+}
+
+static inline void
+___ia64_outb (unsigned char val, unsigned long port)
+{
+ volatile unsigned char *addr = __ia64_mk_io_addr(port);
+
+ *addr = val;
+ __ia64_mf_a();
+}
+
+static inline void
+___ia64_outw (unsigned short val, unsigned long port)
+{
+ volatile unsigned short *addr = __ia64_mk_io_addr(port);
+
+ *addr = val;
+ __ia64_mf_a();
+}
+
+static inline void
+___ia64_outl (unsigned int val, unsigned long port)
+{
+ volatile unsigned int *addr = __ia64_mk_io_addr(port);
+
+ *addr = val;
+ __ia64_mf_a();
+}
+
+static inline void
+__insb (unsigned long port, void *dst, unsigned long count)
+{
+ unsigned char *dp = dst;
+
+ while (count--)
+ *dp++ = platform_inb(port);
+}
+
+static inline void
+__insw (unsigned long port, void *dst, unsigned long count)
+{
+ unsigned short *dp = dst;
+
+ while (count--)
+ *dp++ = platform_inw(port);
+}
+
+static inline void
+__insl (unsigned long port, void *dst, unsigned long count)
+{
+ unsigned int *dp = dst;
+
+ while (count--)
+ *dp++ = platform_inl(port);
+}
+
+static inline void
+__outsb (unsigned long port, const void *src, unsigned long count)
+{
+ const unsigned char *sp = src;
+
+ while (count--)
+ platform_outb(*sp++, port);
+}
+
+static inline void
+__outsw (unsigned long port, const void *src, unsigned long count)
+{
+ const unsigned short *sp = src;
+
+ while (count--)
+ platform_outw(*sp++, port);
+}
+
+static inline void
+__outsl (unsigned long port, const void *src, unsigned long count)
+{
+ const unsigned int *sp = src;
+
+ while (count--)
+ platform_outl(*sp++, port);
+}
+
+/*
+ * Unfortunately, some platforms are broken and do not follow the IA-64 architecture
+ * specification regarding legacy I/O support. Thus, we have to make these operations
+ * platform dependent...
+ */
+#define __inb platform_inb
+#define __inw platform_inw
+#define __inl platform_inl
+#define __outb platform_outb
+#define __outw platform_outw
+#define __outl platform_outl
+#define __mmiowb platform_mmiowb
+
+#define inb(p) __inb(p)
+#define inw(p) __inw(p)
+#define inl(p) __inl(p)
+#define insb(p,d,c) __insb(p,d,c)
+#define insw(p,d,c) __insw(p,d,c)
+#define insl(p,d,c) __insl(p,d,c)
+#define outb(v,p) __outb(v,p)
+#define outw(v,p) __outw(v,p)
+#define outl(v,p) __outl(v,p)
+#define outsb(p,s,c) __outsb(p,s,c)
+#define outsw(p,s,c) __outsw(p,s,c)
+#define outsl(p,s,c) __outsl(p,s,c)
+#define mmiowb() __mmiowb()
+
+/*
+ * The address passed to these functions are ioremap()ped already.
+ *
+ * We need these to be machine vectors since some platforms don't provide
+ * DMA coherence via PIO reads (PCI drivers and the spec imply that this is
+ * a good idea). Writes are ok though for all existing ia64 platforms (and
+ * hopefully it'll stay that way).
+ */
+static inline unsigned char
+___ia64_readb (const volatile void __iomem *addr)
+{
+ return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___ia64_readw (const volatile void __iomem *addr)
+{
+ return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___ia64_readl (const volatile void __iomem *addr)
+{
+ return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___ia64_readq (const volatile void __iomem *addr)
+{
+ return *(volatile unsigned long __force *) addr;
+}
+
+static inline void
+__writeb (unsigned char val, volatile void __iomem *addr)
+{
+ *(volatile unsigned char __force *) addr = val;
+}
+
+static inline void
+__writew (unsigned short val, volatile void __iomem *addr)
+{
+ *(volatile unsigned short __force *) addr = val;
+}
+
+static inline void
+__writel (unsigned int val, volatile void __iomem *addr)
+{
+ *(volatile unsigned int __force *) addr = val;
+}
+
+static inline void
+__writeq (unsigned long val, volatile void __iomem *addr)
+{
+ *(volatile unsigned long __force *) addr = val;
+}
+
+#define __readb platform_readb
+#define __readw platform_readw
+#define __readl platform_readl
+#define __readq platform_readq
+#define __readb_relaxed platform_readb_relaxed
+#define __readw_relaxed platform_readw_relaxed
+#define __readl_relaxed platform_readl_relaxed
+#define __readq_relaxed platform_readq_relaxed
+
+#define readb(a) __readb((a))
+#define readw(a) __readw((a))
+#define readl(a) __readl((a))
+#define readq(a) __readq((a))
+#define readb_relaxed(a) __readb_relaxed((a))
+#define readw_relaxed(a) __readw_relaxed((a))
+#define readl_relaxed(a) __readl_relaxed((a))
+#define readq_relaxed(a) __readq_relaxed((a))
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_readq readq
+#define __raw_readb_relaxed readb_relaxed
+#define __raw_readw_relaxed readw_relaxed
+#define __raw_readl_relaxed readl_relaxed
+#define __raw_readq_relaxed readq_relaxed
+#define writeb(v,a) __writeb((v), (a))
+#define writew(v,a) __writew((v), (a))
+#define writel(v,a) __writel((v), (a))
+#define writeq(v,a) __writeq((v), (a))
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+#define __raw_writeq writeq
+
+#ifndef inb_p
+# define inb_p inb
+#endif
+#ifndef inw_p
+# define inw_p inw
+#endif
+#ifndef inl_p
+# define inl_p inl
+#endif
+
+#ifndef outb_p
+# define outb_p outb
+#endif
+#ifndef outw_p
+# define outw_p outw
+#endif
+#ifndef outl_p
+# define outl_p outl
+#endif
+
+/*
+ * An "address" in IO memory space is not clearly either an integer or a pointer. We will
+ * accept both, thus the casts.
+ *
+ * On ia-64, we access the physical I/O memory space through the uncached kernel region.
+ */
+static inline void __iomem *
+ioremap (unsigned long offset, unsigned long size)
+{
+ return (void __iomem *) (__IA64_UNCACHED_OFFSET | (offset));
+}
+
+static inline void
+iounmap (volatile void __iomem *addr)
+{
+}
+
+#define ioremap_nocache(o,s) ioremap(o,s)
+
+# ifdef __KERNEL__
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n);
+extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n);
+extern void memset_io(volatile void __iomem *s, int c, long n);
+
+#define dma_cache_inv(_start,_size) do { } while (0)
+#define dma_cache_wback(_start,_size) do { } while (0)
+#define dma_cache_wback_inv(_start,_size) do { } while (0)
+
+# endif /* __KERNEL__ */
+
+/*
+ * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing. It is said that
+ * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
+ * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
+ * SPECweb-like workloads on zx1-based machines. Thus, for now we favor I/O MMU bypassing
+ * over BIO-level virtual merging.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#if 1
+#define BIO_VMERGE_BOUNDARY 0
+#else
+/*
+ * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here. Should be
+ * replaced by dma_merge_mask() or something of that sort. Note: the only way
+ * BIO_VMERGE_BOUNDARY is used is to mask off bits. Effectively, our definition gets
+ * expanded into:
+ *
+ * addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
+ *
+ * which is precisely what we want.
+ */
+#define BIO_VMERGE_BOUNDARY (ia64_max_iommu_merge_mask + 1)
+#endif
+
+#endif /* _ASM_IA64_IO_H */
diff --git a/include/asm-ia64/ioctl.h b/include/asm-ia64/ioctl.h
new file mode 100644
index 0000000..be9cc24
--- /dev/null
+++ b/include/asm-ia64/ioctl.h
@@ -0,0 +1,77 @@
+#ifndef _ASM_IA64_IOCTL_H
+#define _ASM_IA64_IOCTL_H
+
+/*
+ * Based on <asm-i386/ioctl.h>.
+ *
+ * Modified 1998, 1999
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms. The ia64 ioctl numbering scheme doesn't really enforce
+ * a type field. De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here. Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS 8
+#define _IOC_TYPEBITS 8
+#define _IOC_SIZEBITS 14
+#define _IOC_DIRBITS 2
+
+#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT 0
+#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE 0U
+#define _IOC_WRITE 1U
+#define _IOC_READ 2U
+
+#define _IOC(dir,type,nr,size) \
+ (((dir) << _IOC_DIRSHIFT) | \
+ ((type) << _IOC_TYPESHIFT) | \
+ ((nr) << _IOC_NRSHIFT) | \
+ ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
+
+#endif /* _ASM_IA64_IOCTL_H */
diff --git a/include/asm-ia64/ioctl32.h b/include/asm-ia64/ioctl32.h
new file mode 100644
index 0000000..d0d227f
--- /dev/null
+++ b/include/asm-ia64/ioctl32.h
@@ -0,0 +1 @@
+#include <linux/ioctl32.h>
diff --git a/include/asm-ia64/ioctls.h b/include/asm-ia64/ioctls.h
new file mode 100644
index 0000000..31ee521
--- /dev/null
+++ b/include/asm-ia64/ioctls.h
@@ -0,0 +1,89 @@
+#ifndef _ASM_IA64_IOCTLS_H
+#define _ASM_IA64_IOCTLS_H
+
+/*
+ * Based on <asm-i386/ioctls.h>
+ *
+ * Modified 1998, 1999, 2002
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
+#define FIOQSIZE 0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* _ASM_IA64_IOCTLS_H */
diff --git a/include/asm-ia64/iosapic.h b/include/asm-ia64/iosapic.h
new file mode 100644
index 0000000..38a7a72
--- /dev/null
+++ b/include/asm-ia64/iosapic.h
@@ -0,0 +1,110 @@
+#ifndef __ASM_IA64_IOSAPIC_H
+#define __ASM_IA64_IOSAPIC_H
+
+#define IOSAPIC_REG_SELECT 0x0
+#define IOSAPIC_WINDOW 0x10
+#define IOSAPIC_EOI 0x40
+
+#define IOSAPIC_VERSION 0x1
+
+/*
+ * Redirection table entry
+ */
+#define IOSAPIC_RTE_LOW(i) (0x10+i*2)
+#define IOSAPIC_RTE_HIGH(i) (0x11+i*2)
+
+#define IOSAPIC_DEST_SHIFT 16
+
+/*
+ * Delivery mode
+ */
+#define IOSAPIC_DELIVERY_SHIFT 8
+#define IOSAPIC_FIXED 0x0
+#define IOSAPIC_LOWEST_PRIORITY 0x1
+#define IOSAPIC_PMI 0x2
+#define IOSAPIC_NMI 0x4
+#define IOSAPIC_INIT 0x5
+#define IOSAPIC_EXTINT 0x7
+
+/*
+ * Interrupt polarity
+ */
+#define IOSAPIC_POLARITY_SHIFT 13
+#define IOSAPIC_POL_HIGH 0
+#define IOSAPIC_POL_LOW 1
+
+/*
+ * Trigger mode
+ */
+#define IOSAPIC_TRIGGER_SHIFT 15
+#define IOSAPIC_EDGE 0
+#define IOSAPIC_LEVEL 1
+
+/*
+ * Mask bit
+ */
+
+#define IOSAPIC_MASK_SHIFT 16
+#define IOSAPIC_MASK (1<<IOSAPIC_MASK_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_IOSAPIC
+
+#define NR_IOSAPICS 256
+
+static inline unsigned int iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+ writel(reg, iosapic + IOSAPIC_REG_SELECT);
+ return readl(iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+ writel(reg, iosapic + IOSAPIC_REG_SELECT);
+ writel(val, iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void iosapic_eoi(char __iomem *iosapic, u32 vector)
+{
+ writel(vector, iosapic + IOSAPIC_EOI);
+}
+
+extern void __init iosapic_system_init (int pcat_compat);
+extern void __init iosapic_init (unsigned long address,
+ unsigned int gsi_base);
+extern int gsi_to_vector (unsigned int gsi);
+extern int gsi_to_irq (unsigned int gsi);
+extern void iosapic_enable_intr (unsigned int vector);
+extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
+ unsigned long trigger);
+#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+extern void iosapic_unregister_intr (unsigned int irq);
+#endif
+extern void __init iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
+ unsigned long polarity,
+ unsigned long trigger);
+extern int __init iosapic_register_platform_intr (u32 int_type,
+ unsigned int gsi,
+ int pmi_vector,
+ u16 eid, u16 id,
+ unsigned long polarity,
+ unsigned long trigger);
+extern unsigned int iosapic_version (char __iomem *addr);
+
+extern void iosapic_pci_fixup (int);
+#ifdef CONFIG_NUMA
+extern void __init map_iosapic_to_node (unsigned int, int);
+#endif
+#else
+#define iosapic_system_init(pcat_compat) do { } while (0)
+#define iosapic_init(address,gsi_base) do { } while (0)
+#define iosapic_register_intr(gsi,polarity,trigger) (gsi)
+#define iosapic_unregister_intr(irq) do { } while (0)
+#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger) do { } while (0)
+#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
+ polarity,trigger) (gsi)
+#endif
+
+# endif /* !__ASSEMBLY__ */
+#endif /* __ASM_IA64_IOSAPIC_H */
diff --git a/include/asm-ia64/ipcbuf.h b/include/asm-ia64/ipcbuf.h
new file mode 100644
index 0000000..079899a
--- /dev/null
+++ b/include/asm-ia64/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IA64_IPCBUF_H
+#define _ASM_IA64_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid_t uid;
+ __kernel_gid_t gid;
+ __kernel_uid_t cuid;
+ __kernel_gid_t cgid;
+ __kernel_mode_t mode;
+ unsigned short seq;
+ unsigned short __pad1;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_IA64_IPCBUF_H */
diff --git a/include/asm-ia64/irq.h b/include/asm-ia64/irq.h
new file mode 100644
index 0000000..bd07d11
--- /dev/null
+++ b/include/asm-ia64/irq.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_IA64_IRQ_H
+#define _ASM_IA64_IRQ_H
+
+/*
+ * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * 11/24/98 S.Eranian updated TIMER_IRQ and irq_canonicalize
+ * 01/20/99 S.Eranian added keyboard interrupt
+ * 02/29/00 D.Mosberger moved most things into hw_irq.h
+ */
+
+#define NR_IRQS 256
+#define NR_IRQ_VECTORS NR_IRQS
+
+static __inline__ int
+irq_canonicalize (int irq)
+{
+ /*
+ * We do the legacy thing here of pretending that irqs < 16
+ * are 8259 irqs. This really shouldn't be necessary at all,
+ * but we keep it here as serial.c still uses it...
+ */
+ return ((irq == 2) ? 9 : irq);
+}
+
+extern void disable_irq (unsigned int);
+extern void disable_irq_nosync (unsigned int);
+extern void enable_irq (unsigned int);
+extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
+
+#ifdef CONFIG_SMP
+extern void move_irq(int irq);
+#else
+#define move_irq(irq)
+#endif
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _ASM_IA64_IRQ_H */
diff --git a/include/asm-ia64/kmap_types.h b/include/asm-ia64/kmap_types.h
new file mode 100644
index 0000000..bc77752
--- /dev/null
+++ b/include/asm-ia64/kmap_types.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_IA64_KMAP_TYPES_H
+#define _ASM_IA64_KMAP_TYPES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0) KM_BOUNCE_READ,
+D(1) KM_SKB_SUNRPC_DATA,
+D(2) KM_SKB_DATA_SOFTIRQ,
+D(3) KM_USER0,
+D(4) KM_USER1,
+D(5) KM_BIO_SRC_IRQ,
+D(6) KM_BIO_DST_IRQ,
+D(7) KM_PTE0,
+D(8) KM_PTE1,
+D(9) KM_IRQ0,
+D(10) KM_IRQ1,
+D(11) KM_SOFTIRQ0,
+D(12) KM_SOFTIRQ1,
+D(13) KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* _ASM_IA64_KMAP_TYPES_H */
diff --git a/include/asm-ia64/kregs.h b/include/asm-ia64/kregs.h
new file mode 100644
index 0000000..221b5cb
--- /dev/null
+++ b/include/asm-ia64/kregs.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_IA64_KREGS_H
+#define _ASM_IA64_KREGS_H
+
+/*
+ * Copyright (C) 2001-2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * This file defines the kernel register usage convention used by Linux/ia64.
+ */
+
+/*
+ * Kernel registers:
+ */
+#define IA64_KR_IO_BASE 0 /* ar.k0: legacy I/O base address */
+#define IA64_KR_TSSD 1 /* ar.k1: IVE uses this as the TSSD */
+#define IA64_KR_PER_CPU_DATA 3 /* ar.k3: physical per-CPU base */
+#define IA64_KR_CURRENT_STACK 4 /* ar.k4: what's mapped in IA64_TR_CURRENT_STACK */
+#define IA64_KR_FPU_OWNER 5 /* ar.k5: fpu-owner (UP only, at the moment) */
+#define IA64_KR_CURRENT 6 /* ar.k6: "current" task pointer */
+#define IA64_KR_PT_BASE 7 /* ar.k7: page table base address (physical) */
+
+#define _IA64_KR_PASTE(x,y) x##y
+#define _IA64_KR_PREFIX(n) _IA64_KR_PASTE(ar.k, n)
+#define IA64_KR(n) _IA64_KR_PREFIX(IA64_KR_##n)
+
+/*
+ * Translation registers:
+ */
+#define IA64_TR_KERNEL 0 /* itr0, dtr0: maps kernel image (code & data) */
+#define IA64_TR_PALCODE 1 /* itr1: maps PALcode as required by EFI */
+#define IA64_TR_PERCPU_DATA 1 /* dtr1: percpu data */
+#define IA64_TR_CURRENT_STACK 2 /* dtr2: maps kernel's memory- & register-stacks */
+
+/* Processor status register bits: */
+#define IA64_PSR_BE_BIT 1
+#define IA64_PSR_UP_BIT 2
+#define IA64_PSR_AC_BIT 3
+#define IA64_PSR_MFL_BIT 4
+#define IA64_PSR_MFH_BIT 5
+#define IA64_PSR_IC_BIT 13
+#define IA64_PSR_I_BIT 14
+#define IA64_PSR_PK_BIT 15
+#define IA64_PSR_DT_BIT 17
+#define IA64_PSR_DFL_BIT 18
+#define IA64_PSR_DFH_BIT 19
+#define IA64_PSR_SP_BIT 20
+#define IA64_PSR_PP_BIT 21
+#define IA64_PSR_DI_BIT 22
+#define IA64_PSR_SI_BIT 23
+#define IA64_PSR_DB_BIT 24
+#define IA64_PSR_LP_BIT 25
+#define IA64_PSR_TB_BIT 26
+#define IA64_PSR_RT_BIT 27
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL0_BIT 32
+#define IA64_PSR_CPL1_BIT 33
+#define IA64_PSR_IS_BIT 34
+#define IA64_PSR_MC_BIT 35
+#define IA64_PSR_IT_BIT 36
+#define IA64_PSR_ID_BIT 37
+#define IA64_PSR_DA_BIT 38
+#define IA64_PSR_DD_BIT 39
+#define IA64_PSR_SS_BIT 40
+#define IA64_PSR_RI_BIT 41
+#define IA64_PSR_ED_BIT 43
+#define IA64_PSR_BN_BIT 44
+#define IA64_PSR_IA_BIT 45
+
+/* A mask of PSR bits that we generally don't want to inherit across a clone2() or an
+ execve(). Only list flags here that need to be cleared/set for BOTH clone2() and
+ execve(). */
+#define IA64_PSR_BITS_TO_CLEAR (IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_DB | IA64_PSR_LP | \
+ IA64_PSR_TB | IA64_PSR_ID | IA64_PSR_DA | IA64_PSR_DD | \
+ IA64_PSR_SS | IA64_PSR_ED | IA64_PSR_IA)
+#define IA64_PSR_BITS_TO_SET (IA64_PSR_DFH | IA64_PSR_SP)
+
+#define IA64_PSR_BE (__IA64_UL(1) << IA64_PSR_BE_BIT)
+#define IA64_PSR_UP (__IA64_UL(1) << IA64_PSR_UP_BIT)
+#define IA64_PSR_AC (__IA64_UL(1) << IA64_PSR_AC_BIT)
+#define IA64_PSR_MFL (__IA64_UL(1) << IA64_PSR_MFL_BIT)
+#define IA64_PSR_MFH (__IA64_UL(1) << IA64_PSR_MFH_BIT)
+#define IA64_PSR_IC (__IA64_UL(1) << IA64_PSR_IC_BIT)
+#define IA64_PSR_I (__IA64_UL(1) << IA64_PSR_I_BIT)
+#define IA64_PSR_PK (__IA64_UL(1) << IA64_PSR_PK_BIT)
+#define IA64_PSR_DT (__IA64_UL(1) << IA64_PSR_DT_BIT)
+#define IA64_PSR_DFL (__IA64_UL(1) << IA64_PSR_DFL_BIT)
+#define IA64_PSR_DFH (__IA64_UL(1) << IA64_PSR_DFH_BIT)
+#define IA64_PSR_SP (__IA64_UL(1) << IA64_PSR_SP_BIT)
+#define IA64_PSR_PP (__IA64_UL(1) << IA64_PSR_PP_BIT)
+#define IA64_PSR_DI (__IA64_UL(1) << IA64_PSR_DI_BIT)
+#define IA64_PSR_SI (__IA64_UL(1) << IA64_PSR_SI_BIT)
+#define IA64_PSR_DB (__IA64_UL(1) << IA64_PSR_DB_BIT)
+#define IA64_PSR_LP (__IA64_UL(1) << IA64_PSR_LP_BIT)
+#define IA64_PSR_TB (__IA64_UL(1) << IA64_PSR_TB_BIT)
+#define IA64_PSR_RT (__IA64_UL(1) << IA64_PSR_RT_BIT)
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL (__IA64_UL(3) << IA64_PSR_CPL0_BIT)
+#define IA64_PSR_IS (__IA64_UL(1) << IA64_PSR_IS_BIT)
+#define IA64_PSR_MC (__IA64_UL(1) << IA64_PSR_MC_BIT)
+#define IA64_PSR_IT (__IA64_UL(1) << IA64_PSR_IT_BIT)
+#define IA64_PSR_ID (__IA64_UL(1) << IA64_PSR_ID_BIT)
+#define IA64_PSR_DA (__IA64_UL(1) << IA64_PSR_DA_BIT)
+#define IA64_PSR_DD (__IA64_UL(1) << IA64_PSR_DD_BIT)
+#define IA64_PSR_SS (__IA64_UL(1) << IA64_PSR_SS_BIT)
+#define IA64_PSR_RI (__IA64_UL(3) << IA64_PSR_RI_BIT)
+#define IA64_PSR_ED (__IA64_UL(1) << IA64_PSR_ED_BIT)
+#define IA64_PSR_BN (__IA64_UL(1) << IA64_PSR_BN_BIT)
+#define IA64_PSR_IA (__IA64_UL(1) << IA64_PSR_IA_BIT)
+
+/* User mask bits: */
+#define IA64_PSR_UM (IA64_PSR_BE | IA64_PSR_UP | IA64_PSR_AC | IA64_PSR_MFL | IA64_PSR_MFH)
+
+/* Default Control Register */
+#define IA64_DCR_PP_BIT 0 /* privileged performance monitor default */
+#define IA64_DCR_BE_BIT 1 /* big-endian default */
+#define IA64_DCR_LC_BIT 2 /* ia32 lock-check enable */
+#define IA64_DCR_DM_BIT 8 /* defer TLB miss faults */
+#define IA64_DCR_DP_BIT 9 /* defer page-not-present faults */
+#define IA64_DCR_DK_BIT 10 /* defer key miss faults */
+#define IA64_DCR_DX_BIT 11 /* defer key permission faults */
+#define IA64_DCR_DR_BIT 12 /* defer access right faults */
+#define IA64_DCR_DA_BIT 13 /* defer access bit faults */
+#define IA64_DCR_DD_BIT 14 /* defer debug faults */
+
+#define IA64_DCR_PP (__IA64_UL(1) << IA64_DCR_PP_BIT)
+#define IA64_DCR_BE (__IA64_UL(1) << IA64_DCR_BE_BIT)
+#define IA64_DCR_LC (__IA64_UL(1) << IA64_DCR_LC_BIT)
+#define IA64_DCR_DM (__IA64_UL(1) << IA64_DCR_DM_BIT)
+#define IA64_DCR_DP (__IA64_UL(1) << IA64_DCR_DP_BIT)
+#define IA64_DCR_DK (__IA64_UL(1) << IA64_DCR_DK_BIT)
+#define IA64_DCR_DX (__IA64_UL(1) << IA64_DCR_DX_BIT)
+#define IA64_DCR_DR (__IA64_UL(1) << IA64_DCR_DR_BIT)
+#define IA64_DCR_DA (__IA64_UL(1) << IA64_DCR_DA_BIT)
+#define IA64_DCR_DD (__IA64_UL(1) << IA64_DCR_DD_BIT)
+
+/* Interrupt Status Register */
+#define IA64_ISR_X_BIT 32 /* execute access */
+#define IA64_ISR_W_BIT 33 /* write access */
+#define IA64_ISR_R_BIT 34 /* read access */
+#define IA64_ISR_NA_BIT 35 /* non-access */
+#define IA64_ISR_SP_BIT 36 /* speculative load exception */
+#define IA64_ISR_RS_BIT 37 /* mandatory register-stack exception */
+#define IA64_ISR_IR_BIT 38 /* invalid register frame exception */
+#define IA64_ISR_CODE_MASK 0xf
+
+#define IA64_ISR_X (__IA64_UL(1) << IA64_ISR_X_BIT)
+#define IA64_ISR_W (__IA64_UL(1) << IA64_ISR_W_BIT)
+#define IA64_ISR_R (__IA64_UL(1) << IA64_ISR_R_BIT)
+#define IA64_ISR_NA (__IA64_UL(1) << IA64_ISR_NA_BIT)
+#define IA64_ISR_SP (__IA64_UL(1) << IA64_ISR_SP_BIT)
+#define IA64_ISR_RS (__IA64_UL(1) << IA64_ISR_RS_BIT)
+#define IA64_ISR_IR (__IA64_UL(1) << IA64_ISR_IR_BIT)
+
+/* ISR code field for non-access instructions */
+#define IA64_ISR_CODE_TPA 0
+#define IA64_ISR_CODE_FC 1
+#define IA64_ISR_CODE_PROBE 2
+#define IA64_ISR_CODE_TAK 3
+#define IA64_ISR_CODE_LFETCH 4
+#define IA64_ISR_CODE_PROBEF 5
+
+#endif /* _ASM_IA64_kREGS_H */
diff --git a/include/asm-ia64/linkage.h b/include/asm-ia64/linkage.h
new file mode 100644
index 0000000..14cd72c
--- /dev/null
+++ b/include/asm-ia64/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define asmlinkage CPP_ASMLINKAGE __attribute__((syscall_linkage))
+
+#endif
diff --git a/include/asm-ia64/local.h b/include/asm-ia64/local.h
new file mode 100644
index 0000000..1dbd584
--- /dev/null
+++ b/include/asm-ia64/local.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_IA64_LOCAL_H
+#define _ASM_IA64_LOCAL_H
+
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/percpu.h>
+
+typedef struct {
+ atomic64_t val;
+} local_t;
+
+#define LOCAL_INIT(i) ((local_t) { { (i) } })
+#define local_read(l) atomic64_read(&(l)->val)
+#define local_set(l, i) atomic64_set(&(l)->val, i)
+#define local_inc(l) atomic64_inc(&(l)->val)
+#define local_dec(l) atomic64_dec(&(l)->val)
+#define local_add(l) atomic64_add(&(l)->val)
+#define local_sub(l) atomic64_sub(&(l)->val)
+
+/* Non-atomic variants, i.e., preemption disabled and won't be touched in interrupt, etc. */
+
+#define __local_inc(l) (++(l)->val.counter)
+#define __local_dec(l) (--(l)->val.counter)
+#define __local_add(i,l) ((l)->val.counter += (i))
+#define __local_sub(i,l) ((l)->val.counter -= (i))
+
+/*
+ * Use these for per-cpu local_t variables. Note they take a variable (eg. mystruct.foo),
+ * not an address.
+ */
+#define cpu_local_read(v) local_read(&__ia64_per_cpu_var(v))
+#define cpu_local_set(v, i) local_set(&__ia64_per_cpu_var(v), (i))
+#define cpu_local_inc(v) local_inc(&__ia64_per_cpu_var(v))
+#define cpu_local_dec(v) local_dec(&__ia64_per_cpu_var(v))
+#define cpu_local_add(i, v) local_add((i), &__ia64_per_cpu_var(v))
+#define cpu_local_sub(i, v) local_sub((i), &__ia64_per_cpu_var(v))
+
+/*
+ * Non-atomic increments, i.e., preemption disabled and won't be touched in interrupt,
+ * etc.
+ */
+#define __cpu_local_inc(v) __local_inc(&__ia64_per_cpu_var(v))
+#define __cpu_local_dec(v) __local_dec(&__ia64_per_cpu_var(v))
+#define __cpu_local_add(i, v) __local_add((i), &__ia64_per_cpu_var(v))
+#define __cpu_local_sub(i, v) __local_sub((i), &__ia64_per_cpu_var(v))
+
+#endif /* _ASM_IA64_LOCAL_H */
diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h
new file mode 100644
index 0000000..79e89a7
--- /dev/null
+++ b/include/asm-ia64/machvec.h
@@ -0,0 +1,390 @@
+/*
+ * Machine vector for IA-64.
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
+ * Copyright (C) 1999-2001, 2003-2004 Hewlett-Packard Co.
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_MACHVEC_H
+#define _ASM_IA64_MACHVEC_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/* forward declarations: */
+struct device;
+struct pt_regs;
+struct scatterlist;
+struct page;
+struct mm_struct;
+struct pci_bus;
+
+typedef void ia64_mv_setup_t (char **);
+typedef void ia64_mv_cpu_init_t (void);
+typedef void ia64_mv_irq_init_t (void);
+typedef void ia64_mv_send_ipi_t (int, int, int, int);
+typedef void ia64_mv_timer_interrupt_t (int, void *, struct pt_regs *);
+typedef void ia64_mv_global_tlb_purge_t (unsigned long, unsigned long, unsigned long);
+typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *);
+typedef unsigned int ia64_mv_local_vector_to_irq (u8);
+typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *);
+typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val,
+ u8 size);
+typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val,
+ u8 size);
+
+/* DMA-mapping interface: */
+typedef void ia64_mv_dma_init (void);
+typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, int);
+typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t);
+typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int);
+typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int);
+typedef int ia64_mv_dma_map_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_unmap_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int);
+typedef int ia64_mv_dma_mapping_error (dma_addr_t dma_addr);
+typedef int ia64_mv_dma_supported (struct device *, u64);
+
+/*
+ * WARNING: The legacy I/O space is _architected_. Platforms are
+ * expected to follow this architected model (see Section 10.7 in the
+ * IA-64 Architecture Software Developer's Manual). Unfortunately,
+ * some broken machines do not follow that model, which is why we have
+ * to make the inX/outX operations part of the machine vector.
+ * Platform designers should follow the architected model whenever
+ * possible.
+ */
+typedef unsigned int ia64_mv_inb_t (unsigned long);
+typedef unsigned int ia64_mv_inw_t (unsigned long);
+typedef unsigned int ia64_mv_inl_t (unsigned long);
+typedef void ia64_mv_outb_t (unsigned char, unsigned long);
+typedef void ia64_mv_outw_t (unsigned short, unsigned long);
+typedef void ia64_mv_outl_t (unsigned int, unsigned long);
+typedef void ia64_mv_mmiowb_t (void);
+typedef unsigned char ia64_mv_readb_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_t (const volatile void __iomem *);
+typedef unsigned char ia64_mv_readb_relaxed_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *);
+
+static inline void
+machvec_noop (void)
+{
+}
+
+static inline void
+machvec_noop_mm (struct mm_struct *mm)
+{
+}
+
+extern void machvec_setup (char **);
+extern void machvec_timer_interrupt (int, void *, struct pt_regs *);
+extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int);
+extern void machvec_dma_sync_sg (struct device *, struct scatterlist *, int, int);
+extern void machvec_tlb_migrate_finish (struct mm_struct *);
+
+# if defined (CONFIG_IA64_HP_SIM)
+# include <asm/machvec_hpsim.h>
+# elif defined (CONFIG_IA64_DIG)
+# include <asm/machvec_dig.h>
+# elif defined (CONFIG_IA64_HP_ZX1)
+# include <asm/machvec_hpzx1.h>
+# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
+# include <asm/machvec_hpzx1_swiotlb.h>
+# elif defined (CONFIG_IA64_SGI_SN2)
+# include <asm/machvec_sn2.h>
+# elif defined (CONFIG_IA64_GENERIC)
+
+# ifdef MACHVEC_PLATFORM_HEADER
+# include MACHVEC_PLATFORM_HEADER
+# else
+# define platform_name ia64_mv.name
+# define platform_setup ia64_mv.setup
+# define platform_cpu_init ia64_mv.cpu_init
+# define platform_irq_init ia64_mv.irq_init
+# define platform_send_ipi ia64_mv.send_ipi
+# define platform_timer_interrupt ia64_mv.timer_interrupt
+# define platform_global_tlb_purge ia64_mv.global_tlb_purge
+# define platform_tlb_migrate_finish ia64_mv.tlb_migrate_finish
+# define platform_dma_init ia64_mv.dma_init
+# define platform_dma_alloc_coherent ia64_mv.dma_alloc_coherent
+# define platform_dma_free_coherent ia64_mv.dma_free_coherent
+# define platform_dma_map_single ia64_mv.dma_map_single
+# define platform_dma_unmap_single ia64_mv.dma_unmap_single
+# define platform_dma_map_sg ia64_mv.dma_map_sg
+# define platform_dma_unmap_sg ia64_mv.dma_unmap_sg
+# define platform_dma_sync_single_for_cpu ia64_mv.dma_sync_single_for_cpu
+# define platform_dma_sync_sg_for_cpu ia64_mv.dma_sync_sg_for_cpu
+# define platform_dma_sync_single_for_device ia64_mv.dma_sync_single_for_device
+# define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
+# define platform_dma_mapping_error ia64_mv.dma_mapping_error
+# define platform_dma_supported ia64_mv.dma_supported
+# define platform_local_vector_to_irq ia64_mv.local_vector_to_irq
+# define platform_pci_get_legacy_mem ia64_mv.pci_get_legacy_mem
+# define platform_pci_legacy_read ia64_mv.pci_legacy_read
+# define platform_pci_legacy_write ia64_mv.pci_legacy_write
+# define platform_inb ia64_mv.inb
+# define platform_inw ia64_mv.inw
+# define platform_inl ia64_mv.inl
+# define platform_outb ia64_mv.outb
+# define platform_outw ia64_mv.outw
+# define platform_outl ia64_mv.outl
+# define platform_mmiowb ia64_mv.mmiowb
+# define platform_readb ia64_mv.readb
+# define platform_readw ia64_mv.readw
+# define platform_readl ia64_mv.readl
+# define platform_readq ia64_mv.readq
+# define platform_readb_relaxed ia64_mv.readb_relaxed
+# define platform_readw_relaxed ia64_mv.readw_relaxed
+# define platform_readl_relaxed ia64_mv.readl_relaxed
+# define platform_readq_relaxed ia64_mv.readq_relaxed
+# endif
+
+/* __attribute__((__aligned__(16))) is required to make size of the
+ * structure multiple of 16 bytes.
+ * This will fillup the holes created because of section 3.3.1 in
+ * Software Conventions guide.
+ */
+struct ia64_machine_vector {
+ const char *name;
+ ia64_mv_setup_t *setup;
+ ia64_mv_cpu_init_t *cpu_init;
+ ia64_mv_irq_init_t *irq_init;
+ ia64_mv_send_ipi_t *send_ipi;
+ ia64_mv_timer_interrupt_t *timer_interrupt;
+ ia64_mv_global_tlb_purge_t *global_tlb_purge;
+ ia64_mv_tlb_migrate_finish_t *tlb_migrate_finish;
+ ia64_mv_dma_init *dma_init;
+ ia64_mv_dma_alloc_coherent *dma_alloc_coherent;
+ ia64_mv_dma_free_coherent *dma_free_coherent;
+ ia64_mv_dma_map_single *dma_map_single;
+ ia64_mv_dma_unmap_single *dma_unmap_single;
+ ia64_mv_dma_map_sg *dma_map_sg;
+ ia64_mv_dma_unmap_sg *dma_unmap_sg;
+ ia64_mv_dma_sync_single_for_cpu *dma_sync_single_for_cpu;
+ ia64_mv_dma_sync_sg_for_cpu *dma_sync_sg_for_cpu;
+ ia64_mv_dma_sync_single_for_device *dma_sync_single_for_device;
+ ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
+ ia64_mv_dma_mapping_error *dma_mapping_error;
+ ia64_mv_dma_supported *dma_supported;
+ ia64_mv_local_vector_to_irq *local_vector_to_irq;
+ ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
+ ia64_mv_pci_legacy_read_t *pci_legacy_read;
+ ia64_mv_pci_legacy_write_t *pci_legacy_write;
+ ia64_mv_inb_t *inb;
+ ia64_mv_inw_t *inw;
+ ia64_mv_inl_t *inl;
+ ia64_mv_outb_t *outb;
+ ia64_mv_outw_t *outw;
+ ia64_mv_outl_t *outl;
+ ia64_mv_mmiowb_t *mmiowb;
+ ia64_mv_readb_t *readb;
+ ia64_mv_readw_t *readw;
+ ia64_mv_readl_t *readl;
+ ia64_mv_readq_t *readq;
+ ia64_mv_readb_relaxed_t *readb_relaxed;
+ ia64_mv_readw_relaxed_t *readw_relaxed;
+ ia64_mv_readl_relaxed_t *readl_relaxed;
+ ia64_mv_readq_relaxed_t *readq_relaxed;
+} __attribute__((__aligned__(16))); /* align attrib? see above comment */
+
+#define MACHVEC_INIT(name) \
+{ \
+ #name, \
+ platform_setup, \
+ platform_cpu_init, \
+ platform_irq_init, \
+ platform_send_ipi, \
+ platform_timer_interrupt, \
+ platform_global_tlb_purge, \
+ platform_tlb_migrate_finish, \
+ platform_dma_init, \
+ platform_dma_alloc_coherent, \
+ platform_dma_free_coherent, \
+ platform_dma_map_single, \
+ platform_dma_unmap_single, \
+ platform_dma_map_sg, \
+ platform_dma_unmap_sg, \
+ platform_dma_sync_single_for_cpu, \
+ platform_dma_sync_sg_for_cpu, \
+ platform_dma_sync_single_for_device, \
+ platform_dma_sync_sg_for_device, \
+ platform_dma_mapping_error, \
+ platform_dma_supported, \
+ platform_local_vector_to_irq, \
+ platform_pci_get_legacy_mem, \
+ platform_pci_legacy_read, \
+ platform_pci_legacy_write, \
+ platform_inb, \
+ platform_inw, \
+ platform_inl, \
+ platform_outb, \
+ platform_outw, \
+ platform_outl, \
+ platform_mmiowb, \
+ platform_readb, \
+ platform_readw, \
+ platform_readl, \
+ platform_readq, \
+ platform_readb_relaxed, \
+ platform_readw_relaxed, \
+ platform_readl_relaxed, \
+ platform_readq_relaxed, \
+}
+
+extern struct ia64_machine_vector ia64_mv;
+extern void machvec_init (const char *name);
+
+# else
+# error Unknown configuration. Update asm-ia64/machvec.h.
+# endif /* CONFIG_IA64_GENERIC */
+
+/*
+ * Declare default routines which aren't declared anywhere else:
+ */
+extern ia64_mv_dma_init swiotlb_init;
+extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent;
+extern ia64_mv_dma_free_coherent swiotlb_free_coherent;
+extern ia64_mv_dma_map_single swiotlb_map_single;
+extern ia64_mv_dma_unmap_single swiotlb_unmap_single;
+extern ia64_mv_dma_map_sg swiotlb_map_sg;
+extern ia64_mv_dma_unmap_sg swiotlb_unmap_sg;
+extern ia64_mv_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device swiotlb_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error;
+extern ia64_mv_dma_supported swiotlb_dma_supported;
+
+/*
+ * Define default versions so we can extend machvec for new platforms without having
+ * to update the machvec files for all existing platforms.
+ */
+#ifndef platform_setup
+# define platform_setup machvec_setup
+#endif
+#ifndef platform_cpu_init
+# define platform_cpu_init machvec_noop
+#endif
+#ifndef platform_irq_init
+# define platform_irq_init machvec_noop
+#endif
+
+#ifndef platform_send_ipi
+# define platform_send_ipi ia64_send_ipi /* default to architected version */
+#endif
+#ifndef platform_timer_interrupt
+# define platform_timer_interrupt machvec_timer_interrupt
+#endif
+#ifndef platform_global_tlb_purge
+# define platform_global_tlb_purge ia64_global_tlb_purge /* default to architected version */
+#endif
+#ifndef platform_tlb_migrate_finish
+# define platform_tlb_migrate_finish machvec_noop_mm
+#endif
+#ifndef platform_dma_init
+# define platform_dma_init swiotlb_init
+#endif
+#ifndef platform_dma_alloc_coherent
+# define platform_dma_alloc_coherent swiotlb_alloc_coherent
+#endif
+#ifndef platform_dma_free_coherent
+# define platform_dma_free_coherent swiotlb_free_coherent
+#endif
+#ifndef platform_dma_map_single
+# define platform_dma_map_single swiotlb_map_single
+#endif
+#ifndef platform_dma_unmap_single
+# define platform_dma_unmap_single swiotlb_unmap_single
+#endif
+#ifndef platform_dma_map_sg
+# define platform_dma_map_sg swiotlb_map_sg
+#endif
+#ifndef platform_dma_unmap_sg
+# define platform_dma_unmap_sg swiotlb_unmap_sg
+#endif
+#ifndef platform_dma_sync_single_for_cpu
+# define platform_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu
+#endif
+#ifndef platform_dma_sync_sg_for_cpu
+# define platform_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu
+#endif
+#ifndef platform_dma_sync_single_for_device
+# define platform_dma_sync_single_for_device swiotlb_sync_single_for_device
+#endif
+#ifndef platform_dma_sync_sg_for_device
+# define platform_dma_sync_sg_for_device swiotlb_sync_sg_for_device
+#endif
+#ifndef platform_dma_mapping_error
+# define platform_dma_mapping_error swiotlb_dma_mapping_error
+#endif
+#ifndef platform_dma_supported
+# define platform_dma_supported swiotlb_dma_supported
+#endif
+#ifndef platform_local_vector_to_irq
+# define platform_local_vector_to_irq __ia64_local_vector_to_irq
+#endif
+#ifndef platform_pci_get_legacy_mem
+# define platform_pci_get_legacy_mem ia64_pci_get_legacy_mem
+#endif
+#ifndef platform_pci_legacy_read
+# define platform_pci_legacy_read ia64_pci_legacy_read
+#endif
+#ifndef platform_pci_legacy_write
+# define platform_pci_legacy_write ia64_pci_legacy_write
+#endif
+#ifndef platform_inb
+# define platform_inb __ia64_inb
+#endif
+#ifndef platform_inw
+# define platform_inw __ia64_inw
+#endif
+#ifndef platform_inl
+# define platform_inl __ia64_inl
+#endif
+#ifndef platform_outb
+# define platform_outb __ia64_outb
+#endif
+#ifndef platform_outw
+# define platform_outw __ia64_outw
+#endif
+#ifndef platform_outl
+# define platform_outl __ia64_outl
+#endif
+#ifndef platform_mmiowb
+# define platform_mmiowb __ia64_mmiowb
+#endif
+#ifndef platform_readb
+# define platform_readb __ia64_readb
+#endif
+#ifndef platform_readw
+# define platform_readw __ia64_readw
+#endif
+#ifndef platform_readl
+# define platform_readl __ia64_readl
+#endif
+#ifndef platform_readq
+# define platform_readq __ia64_readq
+#endif
+#ifndef platform_readb_relaxed
+# define platform_readb_relaxed __ia64_readb_relaxed
+#endif
+#ifndef platform_readw_relaxed
+# define platform_readw_relaxed __ia64_readw_relaxed
+#endif
+#ifndef platform_readl_relaxed
+# define platform_readl_relaxed __ia64_readl_relaxed
+#endif
+#ifndef platform_readq_relaxed
+# define platform_readq_relaxed __ia64_readq_relaxed
+#endif
+
+#endif /* _ASM_IA64_MACHVEC_H */
diff --git a/include/asm-ia64/machvec_dig.h b/include/asm-ia64/machvec_dig.h
new file mode 100644
index 0000000..4dc8522
--- /dev/null
+++ b/include/asm-ia64/machvec_dig.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_IA64_MACHVEC_DIG_h
+#define _ASM_IA64_MACHVEC_DIG_h
+
+extern ia64_mv_setup_t dig_setup;
+extern ia64_mv_irq_init_t dig_irq_init;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure. When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name "dig"
+#define platform_setup dig_setup
+#define platform_irq_init dig_irq_init
+
+#endif /* _ASM_IA64_MACHVEC_DIG_h */
diff --git a/include/asm-ia64/machvec_hpsim.h b/include/asm-ia64/machvec_hpsim.h
new file mode 100644
index 0000000..cf72fc8
--- /dev/null
+++ b/include/asm-ia64/machvec_hpsim.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_IA64_MACHVEC_HPSIM_h
+#define _ASM_IA64_MACHVEC_HPSIM_h
+
+extern ia64_mv_setup_t hpsim_setup;
+extern ia64_mv_irq_init_t hpsim_irq_init;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure. When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name "hpsim"
+#define platform_setup hpsim_setup
+#define platform_irq_init hpsim_irq_init
+
+#endif /* _ASM_IA64_MACHVEC_HPSIM_h */
diff --git a/include/asm-ia64/machvec_hpzx1.h b/include/asm-ia64/machvec_hpzx1.h
new file mode 100644
index 0000000..daafe50
--- /dev/null
+++ b/include/asm-ia64/machvec_hpzx1.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_h
+#define _ASM_IA64_MACHVEC_HPZX1_h
+
+extern ia64_mv_setup_t dig_setup;
+extern ia64_mv_setup_t sba_setup;
+extern ia64_mv_dma_alloc_coherent sba_alloc_coherent;
+extern ia64_mv_dma_free_coherent sba_free_coherent;
+extern ia64_mv_dma_map_single sba_map_single;
+extern ia64_mv_dma_unmap_single sba_unmap_single;
+extern ia64_mv_dma_map_sg sba_map_sg;
+extern ia64_mv_dma_unmap_sg sba_unmap_sg;
+extern ia64_mv_dma_supported sba_dma_supported;
+extern ia64_mv_dma_mapping_error sba_dma_mapping_error;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure. When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name "hpzx1"
+#define platform_setup sba_setup
+#define platform_dma_init machvec_noop
+#define platform_dma_alloc_coherent sba_alloc_coherent
+#define platform_dma_free_coherent sba_free_coherent
+#define platform_dma_map_single sba_map_single
+#define platform_dma_unmap_single sba_unmap_single
+#define platform_dma_map_sg sba_map_sg
+#define platform_dma_unmap_sg sba_unmap_sg
+#define platform_dma_sync_single_for_cpu machvec_dma_sync_single
+#define platform_dma_sync_sg_for_cpu machvec_dma_sync_sg
+#define platform_dma_sync_single_for_device machvec_dma_sync_single
+#define platform_dma_sync_sg_for_device machvec_dma_sync_sg
+#define platform_dma_supported sba_dma_supported
+#define platform_dma_mapping_error sba_dma_mapping_error
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/include/asm-ia64/machvec_hpzx1_swiotlb.h
new file mode 100644
index 0000000..9924b1b
--- /dev/null
+++ b/include/asm-ia64/machvec_hpzx1_swiotlb.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+
+extern ia64_mv_setup_t dig_setup;
+extern ia64_mv_dma_init hwsw_init;
+extern ia64_mv_dma_alloc_coherent hwsw_alloc_coherent;
+extern ia64_mv_dma_free_coherent hwsw_free_coherent;
+extern ia64_mv_dma_map_single hwsw_map_single;
+extern ia64_mv_dma_unmap_single hwsw_unmap_single;
+extern ia64_mv_dma_map_sg hwsw_map_sg;
+extern ia64_mv_dma_unmap_sg hwsw_unmap_sg;
+extern ia64_mv_dma_supported hwsw_dma_supported;
+extern ia64_mv_dma_mapping_error hwsw_dma_mapping_error;
+extern ia64_mv_dma_sync_single_for_cpu hwsw_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu hwsw_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device hwsw_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device hwsw_sync_sg_for_device;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure. When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name "hpzx1_swiotlb"
+
+#define platform_setup dig_setup
+#define platform_dma_init hwsw_init
+#define platform_dma_alloc_coherent hwsw_alloc_coherent
+#define platform_dma_free_coherent hwsw_free_coherent
+#define platform_dma_map_single hwsw_map_single
+#define platform_dma_unmap_single hwsw_unmap_single
+#define platform_dma_map_sg hwsw_map_sg
+#define platform_dma_unmap_sg hwsw_unmap_sg
+#define platform_dma_supported hwsw_dma_supported
+#define platform_dma_mapping_error hwsw_dma_mapping_error
+#define platform_dma_sync_single_for_cpu hwsw_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu hwsw_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device hwsw_sync_single_for_device
+#define platform_dma_sync_sg_for_device hwsw_sync_sg_for_device
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */
diff --git a/include/asm-ia64/machvec_init.h b/include/asm-ia64/machvec_init.h
new file mode 100644
index 0000000..2d36f68
--- /dev/null
+++ b/include/asm-ia64/machvec_init.h
@@ -0,0 +1,32 @@
+#include <asm/machvec.h>
+
+extern ia64_mv_send_ipi_t ia64_send_ipi;
+extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
+extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write;
+
+extern ia64_mv_inb_t __ia64_inb;
+extern ia64_mv_inw_t __ia64_inw;
+extern ia64_mv_inl_t __ia64_inl;
+extern ia64_mv_outb_t __ia64_outb;
+extern ia64_mv_outw_t __ia64_outw;
+extern ia64_mv_outl_t __ia64_outl;
+extern ia64_mv_mmiowb_t __ia64_mmiowb;
+extern ia64_mv_readb_t __ia64_readb;
+extern ia64_mv_readw_t __ia64_readw;
+extern ia64_mv_readl_t __ia64_readl;
+extern ia64_mv_readq_t __ia64_readq;
+extern ia64_mv_readb_t __ia64_readb_relaxed;
+extern ia64_mv_readw_t __ia64_readw_relaxed;
+extern ia64_mv_readl_t __ia64_readl_relaxed;
+extern ia64_mv_readq_t __ia64_readq_relaxed;
+
+#define MACHVEC_HELPER(name) \
+ struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec"))) \
+ = MACHVEC_INIT(name);
+
+#define MACHVEC_DEFINE(name) MACHVEC_HELPER(name)
+
+MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME)
diff --git a/include/asm-ia64/machvec_sn2.h b/include/asm-ia64/machvec_sn2.h
new file mode 100644
index 0000000..e1b6cd63
--- /dev/null
+++ b/include/asm-ia64/machvec_sn2.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2002-2003 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Further, this software is distributed without any warranty that it is
+ * free of the rightful claim of any third person regarding infringement
+ * or the like. Any license provided herein, whether implied or
+ * otherwise, applies only to this software file. Patent licenses, if
+ * any, provided herein do not apply to combinations of this program with
+ * other software, or any other product whatsoever.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy,
+ * Mountain View, CA 94043, or:
+ *
+ * http://www.sgi.com
+ *
+ * For further information regarding this notice, see:
+ *
+ * http://oss.sgi.com/projects/GenInfo/NoticeExplan
+ */
+
+#ifndef _ASM_IA64_MACHVEC_SN2_H
+#define _ASM_IA64_MACHVEC_SN2_H
+
+extern ia64_mv_setup_t sn_setup;
+extern ia64_mv_cpu_init_t sn_cpu_init;
+extern ia64_mv_irq_init_t sn_irq_init;
+extern ia64_mv_send_ipi_t sn2_send_IPI;
+extern ia64_mv_timer_interrupt_t sn_timer_interrupt;
+extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge;
+extern ia64_mv_tlb_migrate_finish_t sn_tlb_migrate_finish;
+extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write;
+extern ia64_mv_inb_t __sn_inb;
+extern ia64_mv_inw_t __sn_inw;
+extern ia64_mv_inl_t __sn_inl;
+extern ia64_mv_outb_t __sn_outb;
+extern ia64_mv_outw_t __sn_outw;
+extern ia64_mv_outl_t __sn_outl;
+extern ia64_mv_mmiowb_t __sn_mmiowb;
+extern ia64_mv_readb_t __sn_readb;
+extern ia64_mv_readw_t __sn_readw;
+extern ia64_mv_readl_t __sn_readl;
+extern ia64_mv_readq_t __sn_readq;
+extern ia64_mv_readb_t __sn_readb_relaxed;
+extern ia64_mv_readw_t __sn_readw_relaxed;
+extern ia64_mv_readl_t __sn_readl_relaxed;
+extern ia64_mv_readq_t __sn_readq_relaxed;
+extern ia64_mv_dma_alloc_coherent sn_dma_alloc_coherent;
+extern ia64_mv_dma_free_coherent sn_dma_free_coherent;
+extern ia64_mv_dma_map_single sn_dma_map_single;
+extern ia64_mv_dma_unmap_single sn_dma_unmap_single;
+extern ia64_mv_dma_map_sg sn_dma_map_sg;
+extern ia64_mv_dma_unmap_sg sn_dma_unmap_sg;
+extern ia64_mv_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu sn_dma_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device sn_dma_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device sn_dma_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error sn_dma_mapping_error;
+extern ia64_mv_dma_supported sn_dma_supported;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure. When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name "sn2"
+#define platform_setup sn_setup
+#define platform_cpu_init sn_cpu_init
+#define platform_irq_init sn_irq_init
+#define platform_send_ipi sn2_send_IPI
+#define platform_timer_interrupt sn_timer_interrupt
+#define platform_global_tlb_purge sn2_global_tlb_purge
+#define platform_tlb_migrate_finish sn_tlb_migrate_finish
+#define platform_pci_fixup sn_pci_fixup
+#define platform_inb __sn_inb
+#define platform_inw __sn_inw
+#define platform_inl __sn_inl
+#define platform_outb __sn_outb
+#define platform_outw __sn_outw
+#define platform_outl __sn_outl
+#define platform_mmiowb __sn_mmiowb
+#define platform_readb __sn_readb
+#define platform_readw __sn_readw
+#define platform_readl __sn_readl
+#define platform_readq __sn_readq
+#define platform_readb_relaxed __sn_readb_relaxed
+#define platform_readw_relaxed __sn_readw_relaxed
+#define platform_readl_relaxed __sn_readl_relaxed
+#define platform_readq_relaxed __sn_readq_relaxed
+#define platform_local_vector_to_irq sn_local_vector_to_irq
+#define platform_pci_get_legacy_mem sn_pci_get_legacy_mem
+#define platform_pci_legacy_read sn_pci_legacy_read
+#define platform_pci_legacy_write sn_pci_legacy_write
+#define platform_dma_init machvec_noop
+#define platform_dma_alloc_coherent sn_dma_alloc_coherent
+#define platform_dma_free_coherent sn_dma_free_coherent
+#define platform_dma_map_single sn_dma_map_single
+#define platform_dma_unmap_single sn_dma_unmap_single
+#define platform_dma_map_sg sn_dma_map_sg
+#define platform_dma_unmap_sg sn_dma_unmap_sg
+#define platform_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu sn_dma_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device sn_dma_sync_single_for_device
+#define platform_dma_sync_sg_for_device sn_dma_sync_sg_for_device
+#define platform_dma_mapping_error sn_dma_mapping_error
+#define platform_dma_supported sn_dma_supported
+
+#include <asm/sn/io.h>
+
+#endif /* _ASM_IA64_MACHVEC_SN2_H */
diff --git a/include/asm-ia64/mc146818rtc.h b/include/asm-ia64/mc146818rtc.h
new file mode 100644
index 0000000..407787a2
--- /dev/null
+++ b/include/asm-ia64/mc146818rtc.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_IA64_MC146818RTC_H
+#define _ASM_IA64_MC146818RTC_H
+
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+
+/* empty include file to satisfy the include in genrtc.c */
+
+#endif /* _ASM_IA64_MC146818RTC_H */
diff --git a/include/asm-ia64/mca.h b/include/asm-ia64/mca.h
new file mode 100644
index 0000000..149ad01
--- /dev/null
+++ b/include/asm-ia64/mca.h
@@ -0,0 +1,132 @@
+/*
+ * File: mca.h
+ * Purpose: Machine check handling specific defines
+ *
+ * Copyright (C) 1999, 2004 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander (vijay@engr.sgi.com)
+ * Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
+ * Copyright (C) Russ Anderson (rja@sgi.com)
+ */
+
+#ifndef _ASM_IA64_MCA_H
+#define _ASM_IA64_MCA_H
+
+#define IA64_MCA_STACK_SIZE 8192
+
+#if !defined(__ASSEMBLY__)
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/sal.h>
+#include <asm/processor.h>
+#include <asm/mca_asm.h>
+
+#define IA64_MCA_RENDEZ_TIMEOUT (20 * 1000) /* value in milliseconds - 20 seconds */
+
+typedef struct ia64_fptr {
+ unsigned long fp;
+ unsigned long gp;
+} ia64_fptr_t;
+
+typedef union cmcv_reg_u {
+ u64 cmcv_regval;
+ struct {
+ u64 cmcr_vector : 8;
+ u64 cmcr_reserved1 : 4;
+ u64 cmcr_ignored1 : 1;
+ u64 cmcr_reserved2 : 3;
+ u64 cmcr_mask : 1;
+ u64 cmcr_ignored2 : 47;
+ } cmcv_reg_s;
+
+} cmcv_reg_t;
+
+#define cmcv_mask cmcv_reg_s.cmcr_mask
+#define cmcv_vector cmcv_reg_s.cmcr_vector
+
+enum {
+ IA64_MCA_RENDEZ_CHECKIN_NOTDONE = 0x0,
+ IA64_MCA_RENDEZ_CHECKIN_DONE = 0x1
+};
+
+/* Information maintained by the MC infrastructure */
+typedef struct ia64_mc_info_s {
+ u64 imi_mca_handler;
+ size_t imi_mca_handler_size;
+ u64 imi_monarch_init_handler;
+ size_t imi_monarch_init_handler_size;
+ u64 imi_slave_init_handler;
+ size_t imi_slave_init_handler_size;
+ u8 imi_rendez_checkin[NR_CPUS];
+
+} ia64_mc_info_t;
+
+typedef struct ia64_mca_sal_to_os_state_s {
+ u64 imsto_os_gp; /* GP of the os registered with the SAL */
+ u64 imsto_pal_proc; /* PAL_PROC entry point - physical addr */
+ u64 imsto_sal_proc; /* SAL_PROC entry point - physical addr */
+ u64 imsto_sal_gp; /* GP of the SAL - physical */
+ u64 imsto_rendez_state; /* Rendez state information */
+ u64 imsto_sal_check_ra; /* Return address in SAL_CHECK while going
+ * back to SAL from OS after MCA handling.
+ */
+ u64 pal_min_state; /* from PAL in r17 */
+ u64 proc_state_param; /* from PAL in r18. See SDV 2:268 11.3.2.1 */
+} ia64_mca_sal_to_os_state_t;
+
+enum {
+ IA64_MCA_CORRECTED = 0x0, /* Error has been corrected by OS_MCA */
+ IA64_MCA_WARM_BOOT = -1, /* Warm boot of the system need from SAL */
+ IA64_MCA_COLD_BOOT = -2, /* Cold boot of the system need from SAL */
+ IA64_MCA_HALT = -3 /* System to be halted by SAL */
+};
+
+enum {
+ IA64_MCA_SAME_CONTEXT = 0x0, /* SAL to return to same context */
+ IA64_MCA_NEW_CONTEXT = -1 /* SAL to return to new context */
+};
+
+typedef struct ia64_mca_os_to_sal_state_s {
+ u64 imots_os_status; /* OS status to SAL as to what happened
+ * with the MCA handling.
+ */
+ u64 imots_sal_gp; /* GP of the SAL - physical */
+ u64 imots_context; /* 0 if return to same context
+ 1 if return to new context */
+ u64 *imots_new_min_state; /* Pointer to structure containing
+ * new values of registers in the min state
+ * save area.
+ */
+ u64 imots_sal_check_ra; /* Return address in SAL_CHECK while going
+ * back to SAL from OS after MCA handling.
+ */
+} ia64_mca_os_to_sal_state_t;
+
+/* Per-CPU MCA state that is too big for normal per-CPU variables. */
+
+struct ia64_mca_cpu {
+ u64 stack[IA64_MCA_STACK_SIZE/8]; /* MCA memory-stack */
+ u64 proc_state_dump[512];
+ u64 stackframe[32];
+ u64 rbstore[IA64_MCA_STACK_SIZE/8]; /* MCA reg.-backing store */
+ u64 init_stack[KERNEL_STACK_SIZE/8];
+} __attribute__ ((aligned(16)));
+
+/* Array of physical addresses of each CPU's MCA area. */
+extern unsigned long __per_cpu_mca[NR_CPUS];
+
+extern void ia64_mca_init(void);
+extern void ia64_mca_cpu_init(void *);
+extern void ia64_os_mca_dispatch(void);
+extern void ia64_os_mca_dispatch_end(void);
+extern void ia64_mca_ucmc_handler(void);
+extern void ia64_monarch_init_handler(void);
+extern void ia64_slave_init_handler(void);
+extern void ia64_mca_cmc_vector_setup(void);
+extern int ia64_reg_MCA_extension(void*);
+extern void ia64_unreg_MCA_extension(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_MCA_H */
diff --git a/include/asm-ia64/mca_asm.h b/include/asm-ia64/mca_asm.h
new file mode 100644
index 0000000..836953e
--- /dev/null
+++ b/include/asm-ia64/mca_asm.h
@@ -0,0 +1,312 @@
+/*
+ * File: mca_asm.h
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander (vijay@engr.sgi.com)
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) 2000 Hewlett-Packard Co.
+ * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ */
+#ifndef _ASM_IA64_MCA_ASM_H
+#define _ASM_IA64_MCA_ASM_H
+
+#define PSR_IC 13
+#define PSR_I 14
+#define PSR_DT 17
+#define PSR_RT 27
+#define PSR_MC 35
+#define PSR_IT 36
+#define PSR_BN 44
+
+/*
+ * This macro converts a instruction virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ * 1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define INST_VA_TO_PA(addr) \
+ dep addr = 0, addr, 61, 3
+/*
+ * This macro converts a data virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ * 1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define DATA_VA_TO_PA(addr) \
+ tpa addr = addr
+/*
+ * This macro converts a data physical address to a virtual address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ * 1. Put 0x7 in bits 61 thru 63.
+ */
+#define DATA_PA_TO_VA(addr,temp) \
+ mov temp = 0x7 ;; \
+ dep addr = temp, addr, 61, 3
+
+#define GET_THIS_PADDR(reg, var) \
+ mov reg = IA64_KR(PER_CPU_DATA);; \
+ addl reg = THIS_CPU(var), reg
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in physical mode with all the address
+ * translations turned off.
+ * 1. Save the current psr
+ * 2. Make sure that all the upper 32 bits are off
+ *
+ * 3. Clear the interrupt enable and interrupt state collection bits
+ * in the psr before updating the ipsr and iip.
+ *
+ * 4. Turn off the instruction, data and rse translation bits of the psr
+ * and store the new value into ipsr
+ * Also make sure that the interrupts are disabled.
+ * Ensure that we are in little endian mode.
+ * [psr.{rt, it, dt, i, be} = 0]
+ *
+ * 5. Get the physical address corresponding to the virtual address
+ * of the next instruction bundle and put it in iip.
+ * (Using magic numbers 24 and 40 in the deposint instruction since
+ * the IA64_SDK code directly maps to lower 24bits as physical address
+ * from a virtual address).
+ *
+ * 6. Do an rfi to move the values from ipsr to psr and iip to ip.
+ */
+#define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
+ mov old_psr = psr; \
+ ;; \
+ dep old_psr = 0, old_psr, 32, 32; \
+ \
+ mov ar.rsc = 0 ; \
+ ;; \
+ srlz.d; \
+ mov temp2 = ar.bspstore; \
+ ;; \
+ DATA_VA_TO_PA(temp2); \
+ ;; \
+ mov temp1 = ar.rnat; \
+ ;; \
+ mov ar.bspstore = temp2; \
+ ;; \
+ mov ar.rnat = temp1; \
+ mov temp1 = psr; \
+ mov temp2 = psr; \
+ ;; \
+ \
+ dep temp2 = 0, temp2, PSR_IC, 2; \
+ ;; \
+ mov psr.l = temp2; \
+ ;; \
+ srlz.d; \
+ dep temp1 = 0, temp1, 32, 32; \
+ ;; \
+ dep temp1 = 0, temp1, PSR_IT, 1; \
+ ;; \
+ dep temp1 = 0, temp1, PSR_DT, 1; \
+ ;; \
+ dep temp1 = 0, temp1, PSR_RT, 1; \
+ ;; \
+ dep temp1 = 0, temp1, PSR_I, 1; \
+ ;; \
+ dep temp1 = 0, temp1, PSR_IC, 1; \
+ ;; \
+ dep temp1 = -1, temp1, PSR_MC, 1; \
+ ;; \
+ mov cr.ipsr = temp1; \
+ ;; \
+ LOAD_PHYSICAL(p0, temp2, start_addr); \
+ ;; \
+ mov cr.iip = temp2; \
+ mov cr.ifs = r0; \
+ DATA_VA_TO_PA(sp); \
+ DATA_VA_TO_PA(gp); \
+ ;; \
+ srlz.i; \
+ ;; \
+ nop 1; \
+ nop 2; \
+ nop 1; \
+ nop 2; \
+ rfi; \
+ ;;
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in virtual mode with all the address
+ * translations turned on.
+ * 1. Get the old saved psr
+ *
+ * 2. Clear the interrupt state collection bit in the current psr.
+ *
+ * 3. Set the instruction translation bit back in the old psr
+ * Note we have to do this since we are right now saving only the
+ * lower 32-bits of old psr.(Also the old psr has the data and
+ * rse translation bits on)
+ *
+ * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1.
+ *
+ * 5. Reset the current thread pointer (r13).
+ *
+ * 6. Set iip to the virtual address of the next instruction bundle.
+ *
+ * 7. Do an rfi to move ipsr to psr and iip to ip.
+ */
+
+#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
+ mov temp2 = psr; \
+ ;; \
+ mov old_psr = temp2; \
+ ;; \
+ dep temp2 = 0, temp2, PSR_IC, 2; \
+ ;; \
+ mov psr.l = temp2; \
+ mov ar.rsc = 0; \
+ ;; \
+ srlz.d; \
+ mov r13 = ar.k6; \
+ mov temp2 = ar.bspstore; \
+ ;; \
+ DATA_PA_TO_VA(temp2,temp1); \
+ ;; \
+ mov temp1 = ar.rnat; \
+ ;; \
+ mov ar.bspstore = temp2; \
+ ;; \
+ mov ar.rnat = temp1; \
+ ;; \
+ mov temp1 = old_psr; \
+ ;; \
+ mov temp2 = 1; \
+ ;; \
+ dep temp1 = temp2, temp1, PSR_IC, 1; \
+ ;; \
+ dep temp1 = temp2, temp1, PSR_IT, 1; \
+ ;; \
+ dep temp1 = temp2, temp1, PSR_DT, 1; \
+ ;; \
+ dep temp1 = temp2, temp1, PSR_RT, 1; \
+ ;; \
+ dep temp1 = temp2, temp1, PSR_BN, 1; \
+ ;; \
+ \
+ mov cr.ipsr = temp1; \
+ movl temp2 = start_addr; \
+ ;; \
+ mov cr.iip = temp2; \
+ ;; \
+ DATA_PA_TO_VA(sp, temp1); \
+ DATA_PA_TO_VA(gp, temp2); \
+ srlz.i; \
+ ;; \
+ nop 1; \
+ nop 2; \
+ nop 1; \
+ rfi \
+ ;;
+
+/*
+ * The following offsets capture the order in which the
+ * RSE related registers from the old context are
+ * saved onto the new stack frame.
+ *
+ * +-----------------------+
+ * |NDIRTY [BSP - BSPSTORE]|
+ * +-----------------------+
+ * | RNAT |
+ * +-----------------------+
+ * | BSPSTORE |
+ * +-----------------------+
+ * | IFS |
+ * +-----------------------+
+ * | PFS |
+ * +-----------------------+
+ * | RSC |
+ * +-----------------------+ <-------- Bottom of new stack frame
+ */
+#define rse_rsc_offset 0
+#define rse_pfs_offset (rse_rsc_offset+0x08)
+#define rse_ifs_offset (rse_pfs_offset+0x08)
+#define rse_bspstore_offset (rse_ifs_offset+0x08)
+#define rse_rnat_offset (rse_bspstore_offset+0x08)
+#define rse_ndirty_offset (rse_rnat_offset+0x08)
+
+/*
+ * rse_switch_context
+ *
+ * 1. Save old RSC onto the new stack frame
+ * 2. Save PFS onto new stack frame
+ * 3. Cover the old frame and start a new frame.
+ * 4. Save IFS onto new stack frame
+ * 5. Save the old BSPSTORE on the new stack frame
+ * 6. Save the old RNAT on the new stack frame
+ * 7. Write BSPSTORE with the new backing store pointer
+ * 8. Read and save the new BSP to calculate the #dirty registers
+ * NOTE: Look at pages 11-10, 11-11 in PRM Vol 2
+ */
+#define rse_switch_context(temp,p_stackframe,p_bspstore) \
+ ;; \
+ mov temp=ar.rsc;; \
+ st8 [p_stackframe]=temp,8;; \
+ mov temp=ar.pfs;; \
+ st8 [p_stackframe]=temp,8; \
+ cover ;; \
+ mov temp=cr.ifs;; \
+ st8 [p_stackframe]=temp,8;; \
+ mov temp=ar.bspstore;; \
+ st8 [p_stackframe]=temp,8;; \
+ mov temp=ar.rnat;; \
+ st8 [p_stackframe]=temp,8; \
+ mov ar.bspstore=p_bspstore;; \
+ mov temp=ar.bsp;; \
+ sub temp=temp,p_bspstore;; \
+ st8 [p_stackframe]=temp,8;;
+
+/*
+ * rse_return_context
+ * 1. Allocate a zero-sized frame
+ * 2. Store the number of dirty registers RSC.loadrs field
+ * 3. Issue a loadrs to insure that any registers from the interrupted
+ * context which were saved on the new stack frame have been loaded
+ * back into the stacked registers
+ * 4. Restore BSPSTORE
+ * 5. Restore RNAT
+ * 6. Restore PFS
+ * 7. Restore IFS
+ * 8. Restore RSC
+ * 9. Issue an RFI
+ */
+#define rse_return_context(psr_mask_reg,temp,p_stackframe) \
+ ;; \
+ alloc temp=ar.pfs,0,0,0,0; \
+ add p_stackframe=rse_ndirty_offset,p_stackframe;; \
+ ld8 temp=[p_stackframe];; \
+ shl temp=temp,16;; \
+ mov ar.rsc=temp;; \
+ loadrs;; \
+ add p_stackframe=-rse_ndirty_offset+rse_bspstore_offset,p_stackframe;;\
+ ld8 temp=[p_stackframe];; \
+ mov ar.bspstore=temp;; \
+ add p_stackframe=-rse_bspstore_offset+rse_rnat_offset,p_stackframe;;\
+ ld8 temp=[p_stackframe];; \
+ mov ar.rnat=temp;; \
+ add p_stackframe=-rse_rnat_offset+rse_pfs_offset,p_stackframe;; \
+ ld8 temp=[p_stackframe];; \
+ mov ar.pfs=temp;; \
+ add p_stackframe=-rse_pfs_offset+rse_ifs_offset,p_stackframe;; \
+ ld8 temp=[p_stackframe];; \
+ mov cr.ifs=temp;; \
+ add p_stackframe=-rse_ifs_offset+rse_rsc_offset,p_stackframe;; \
+ ld8 temp=[p_stackframe];; \
+ mov ar.rsc=temp ; \
+ mov temp=psr;; \
+ or temp=temp,psr_mask_reg;; \
+ mov cr.ipsr=temp;; \
+ mov temp=ip;; \
+ add temp=0x30,temp;; \
+ mov cr.iip=temp;; \
+ srlz.i;; \
+ rfi;;
+
+#endif /* _ASM_IA64_MCA_ASM_H */
diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h
new file mode 100644
index 0000000..1590dc6
--- /dev/null
+++ b/include/asm-ia64/meminit.h
@@ -0,0 +1,60 @@
+#ifndef meminit_h
+#define meminit_h
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Entries defined so far:
+ * - boot param structure itself
+ * - memory map
+ * - initrd (optional)
+ * - command line string
+ * - kernel code & data
+ *
+ * More could be added if necessary
+ */
+#define IA64_MAX_RSVD_REGIONS 5
+
+struct rsvd_region {
+ unsigned long start; /* virtual address of beginning of element */
+ unsigned long end; /* virtual address of end of element + 1 */
+};
+
+extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1];
+extern int num_rsvd_regions;
+
+extern void find_memory (void);
+extern void reserve_memory (void);
+extern void find_initrd (void);
+extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
+
+/*
+ * For rounding an address to the next IA64_GRANULE_SIZE or order
+ */
+#define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1))
+#define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
+#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
+
+#ifdef CONFIG_DISCONTIGMEM
+ extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
+#else
+# define call_pernode_memory(start, len, func) (*func)(start, len, 0)
+#endif
+
+#define IGNORE_PFN0 1 /* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define LARGE_GAP 0x40000000 /* Use virtual mem map if hole is > than this */
+ extern unsigned long vmalloc_end;
+ extern struct page *vmem_map;
+ extern int find_largest_hole (u64 start, u64 end, void *arg);
+ extern int create_mem_map_page_table (u64 start, u64 end, void *arg);
+#endif
+
+#endif /* meminit_h */
diff --git a/include/asm-ia64/mman.h b/include/asm-ia64/mman.h
new file mode 100644
index 0000000..1c0a73a
--- /dev/null
+++ b/include/asm-ia64/mman.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_MMAN_H
+#define _ASM_IA64_MMAN_H
+
+/*
+ * Based on <asm-i386/mman.h>.
+ *
+ * Modified 1998-2000, 2002
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define PROT_READ 0x1 /* page can be read */
+#define PROT_WRITE 0x2 /* page can be written */
+#define PROT_EXEC 0x4 /* page can be executed */
+#define PROT_SEM 0x8 /* page may be used for atomic ops */
+#define PROT_NONE 0x0 /* page can not be accessed */
+#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED 0x01 /* Share changes */
+#define MAP_PRIVATE 0x02 /* Changes are private */
+#define MAP_TYPE 0x0f /* Mask for type of mapping */
+#define MAP_FIXED 0x10 /* Interpret addr exactly */
+#define MAP_ANONYMOUS 0x20 /* don't use a file */
+
+#define MAP_GROWSDOWN 0x00100 /* stack-like segment */
+#define MAP_GROWSUP 0x00200 /* register stack-like segment */
+#define MAP_DENYWRITE 0x00800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x01000 /* mark it as an executable */
+#define MAP_LOCKED 0x02000 /* pages are locked */
+#define MAP_NORESERVE 0x04000 /* don't check for reservations */
+#define MAP_POPULATE 0x08000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MS_ASYNC 1 /* sync memory asynchronously */
+#define MS_INVALIDATE 2 /* invalidate the caches */
+#define MS_SYNC 4 /* synchronous memory sync */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#define MADV_NORMAL 0x0 /* default page-in behavior */
+#define MADV_RANDOM 0x1 /* page-in minimum required */
+#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
+#define MADV_WILLNEED 0x3 /* pre-fault pages */
+#define MADV_DONTNEED 0x4 /* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON MAP_ANONYMOUS
+#define MAP_FILE 0
+
+#endif /* _ASM_IA64_MMAN_H */
diff --git a/include/asm-ia64/mmu.h b/include/asm-ia64/mmu.h
new file mode 100644
index 0000000..ae15253
--- /dev/null
+++ b/include/asm-ia64/mmu.h
@@ -0,0 +1,11 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/*
+ * Type for a context number. We declare it volatile to ensure proper ordering when it's
+ * accessed outside of spinlock'd critical sections (e.g., as done in activate_mm() and
+ * init_new_context()).
+ */
+typedef volatile unsigned long mm_context_t;
+
+#endif
diff --git a/include/asm-ia64/mmu_context.h b/include/asm-ia64/mmu_context.h
new file mode 100644
index 0000000..0096e7e
--- /dev/null
+++ b/include/asm-ia64/mmu_context.h
@@ -0,0 +1,170 @@
+#ifndef _ASM_IA64_MMU_CONTEXT_H
+#define _ASM_IA64_MMU_CONTEXT_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * Routines to manage the allocation of task context numbers. Task context numbers are
+ * used to reduce or eliminate the need to perform TLB flushes due to context switches.
+ * Context numbers are implemented using ia-64 region ids. Since the IA-64 TLB does not
+ * consider the region number when performing a TLB lookup, we need to assign a unique
+ * region id to each region in a process. We use the least significant three bits in a
+ * region id for this purpose.
+ */
+
+#define IA64_REGION_ID_KERNEL 0 /* the kernel's region id (tlb.c depends on this being 0) */
+
+#define ia64_rid(ctx,addr) (((ctx) << 3) | (addr >> 61))
+
+# ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+
+struct ia64_ctx {
+ spinlock_t lock;
+ unsigned int next; /* next context number to use */
+ unsigned int limit; /* next >= limit => must call wrap_mmu_context() */
+ unsigned int max_ctx; /* max. context value supported by all CPUs */
+};
+
+extern struct ia64_ctx ia64_ctx;
+DECLARE_PER_CPU(u8, ia64_need_tlb_flush);
+
+extern void wrap_mmu_context (struct mm_struct *mm);
+
+static inline void
+enter_lazy_tlb (struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * When the context counter wraps around all TLBs need to be flushed because an old
+ * context number might have been reused. This is signalled by the ia64_need_tlb_flush
+ * per-CPU variable, which is checked in the routine below. Called by activate_mm().
+ * <efocht@ess.nec.de>
+ */
+static inline void
+delayed_tlb_flush (void)
+{
+ extern void local_flush_tlb_all (void);
+
+ if (unlikely(__ia64_per_cpu_var(ia64_need_tlb_flush))) {
+ local_flush_tlb_all();
+ __ia64_per_cpu_var(ia64_need_tlb_flush) = 0;
+ }
+}
+
+static inline mm_context_t
+get_mmu_context (struct mm_struct *mm)
+{
+ unsigned long flags;
+ mm_context_t context = mm->context;
+
+ if (context)
+ return context;
+
+ spin_lock_irqsave(&ia64_ctx.lock, flags);
+ {
+ /* re-check, now that we've got the lock: */
+ context = mm->context;
+ if (context == 0) {
+ cpus_clear(mm->cpu_vm_mask);
+ if (ia64_ctx.next >= ia64_ctx.limit)
+ wrap_mmu_context(mm);
+ mm->context = context = ia64_ctx.next++;
+ }
+ }
+ spin_unlock_irqrestore(&ia64_ctx.lock, flags);
+ return context;
+}
+
+/*
+ * Initialize context number to some sane value. MM is guaranteed to be a brand-new
+ * address-space, so no TLB flushing is needed, ever.
+ */
+static inline int
+init_new_context (struct task_struct *p, struct mm_struct *mm)
+{
+ mm->context = 0;
+ return 0;
+}
+
+static inline void
+destroy_context (struct mm_struct *mm)
+{
+ /* Nothing to do. */
+}
+
+static inline void
+reload_context (mm_context_t context)
+{
+ unsigned long rid;
+ unsigned long rid_incr = 0;
+ unsigned long rr0, rr1, rr2, rr3, rr4, old_rr4;
+
+ old_rr4 = ia64_get_rr(0x8000000000000000UL);
+ rid = context << 3; /* make space for encoding the region number */
+ rid_incr = 1 << 8;
+
+ /* encode the region id, preferred page size, and VHPT enable bit: */
+ rr0 = (rid << 8) | (PAGE_SHIFT << 2) | 1;
+ rr1 = rr0 + 1*rid_incr;
+ rr2 = rr0 + 2*rid_incr;
+ rr3 = rr0 + 3*rid_incr;
+ rr4 = rr0 + 4*rid_incr;
+#ifdef CONFIG_HUGETLB_PAGE
+ rr4 = (rr4 & (~(0xfcUL))) | (old_rr4 & 0xfc);
+#endif
+
+ ia64_set_rr(0x0000000000000000UL, rr0);
+ ia64_set_rr(0x2000000000000000UL, rr1);
+ ia64_set_rr(0x4000000000000000UL, rr2);
+ ia64_set_rr(0x6000000000000000UL, rr3);
+ ia64_set_rr(0x8000000000000000UL, rr4);
+ ia64_srlz_i(); /* srlz.i implies srlz.d */
+}
+
+static inline void
+activate_context (struct mm_struct *mm)
+{
+ mm_context_t context;
+
+ do {
+ context = get_mmu_context(mm);
+ if (!cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+ cpu_set(smp_processor_id(), mm->cpu_vm_mask);
+ reload_context(context);
+ /* in the unlikely event of a TLB-flush by another thread, redo the load: */
+ } while (unlikely(context != mm->context));
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+/*
+ * Switch from address space PREV to address space NEXT.
+ */
+static inline void
+activate_mm (struct mm_struct *prev, struct mm_struct *next)
+{
+ delayed_tlb_flush();
+
+ /*
+ * We may get interrupts here, but that's OK because interrupt handlers cannot
+ * touch user-space.
+ */
+ ia64_set_kr(IA64_KR_PT_BASE, __pa(next->pgd));
+ activate_context(next);
+}
+
+#define switch_mm(prev_mm,next_mm,next_task) activate_mm(prev_mm, next_mm)
+
+# endif /* ! __ASSEMBLY__ */
+#endif /* _ASM_IA64_MMU_CONTEXT_H */
diff --git a/include/asm-ia64/mmzone.h b/include/asm-ia64/mmzone.h
new file mode 100644
index 0000000..9491dac
--- /dev/null
+++ b/include/asm-ia64/mmzone.h
@@ -0,0 +1,32 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000,2003 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_MMZONE_H
+#define _ASM_IA64_MMZONE_H
+
+#include <linux/numa.h>
+#include <asm/page.h>
+#include <asm/meminit.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#ifdef CONFIG_IA64_DIG /* DIG systems are small */
+# define MAX_PHYSNODE_ID 8
+# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)
+#else /* sn2 is the biggest case, so we use that if !DIG */
+# define MAX_PHYSNODE_ID 2048
+# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
+#endif
+
+#else /* CONFIG_DISCONTIGMEM */
+# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_IA64_MMZONE_H */
diff --git a/include/asm-ia64/module.h b/include/asm-ia64/module.h
new file mode 100644
index 0000000..85c82bd
--- /dev/null
+++ b/include/asm-ia64/module.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_IA64_MODULE_H
+#define _ASM_IA64_MODULE_H
+
+/*
+ * IA-64-specific support for kernel module loader.
+ *
+ * Copyright (C) 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+struct elf64_shdr; /* forward declration */
+
+struct mod_arch_specific {
+ struct elf64_shdr *core_plt; /* core PLT section */
+ struct elf64_shdr *init_plt; /* init PLT section */
+ struct elf64_shdr *got; /* global offset table */
+ struct elf64_shdr *opd; /* official procedure descriptors */
+ struct elf64_shdr *unwind; /* unwind-table section */
+ unsigned long gp; /* global-pointer for module */
+
+ void *core_unw_table; /* core unwind-table cookie returned by unwinder */
+ void *init_unw_table; /* init unwind-table cookie returned by unwinder */
+ unsigned int next_got_entry; /* index of next available got entry */
+};
+
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+
+#define MODULE_PROC_FAMILY "ia64"
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#define ARCH_SHF_SMALL SHF_IA_64_SHORT
+
+#endif /* _ASM_IA64_MODULE_H */
diff --git a/include/asm-ia64/msgbuf.h b/include/asm-ia64/msgbuf.h
new file mode 100644
index 0000000..6c64c0d
--- /dev/null
+++ b/include/asm-ia64/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_IA64_MSGBUF_H
+#define _ASM_IA64_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_IA64_MSGBUF_H */
diff --git a/include/asm-ia64/msi.h b/include/asm-ia64/msi.h
new file mode 100644
index 0000000..60f2137
--- /dev/null
+++ b/include/asm-ia64/msi.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2003-2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef ASM_MSI_H
+#define ASM_MSI_H
+
+#define NR_VECTORS NR_IRQS
+#define FIRST_DEVICE_VECTOR IA64_FIRST_DEVICE_VECTOR
+#define LAST_DEVICE_VECTOR IA64_LAST_DEVICE_VECTOR
+static inline void set_intr_gate (int nr, void *func) {}
+#define IO_APIC_VECTOR(irq) (irq)
+#define ack_APIC_irq ia64_eoi
+#define cpu_mask_to_apicid(mask) cpu_physical_id(first_cpu(mask))
+#define MSI_DEST_MODE MSI_PHYSICAL_MODE
+#define MSI_TARGET_CPU ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+#define MSI_TARGET_CPU_SHIFT 4
+
+#endif /* ASM_MSI_H */
diff --git a/include/asm-ia64/namei.h b/include/asm-ia64/namei.h
new file mode 100644
index 0000000..78e7680
--- /dev/null
+++ b/include/asm-ia64/namei.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_IA64_NAMEI_H
+#define _ASM_IA64_NAMEI_H
+
+/*
+ * Modified 1998, 1999, 2001
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+#define EMUL_PREFIX_LINUX_IA32 "/emul/ia32-linux/"
+
+static inline char *
+__emul_prefix (void)
+{
+ switch (current->personality) {
+ case PER_LINUX32:
+ return EMUL_PREFIX_LINUX_IA32;
+ default:
+ return NULL;
+ }
+}
+
+#endif /* _ASM_IA64_NAMEI_H */
diff --git a/include/asm-ia64/nodedata.h b/include/asm-ia64/nodedata.h
new file mode 100644
index 0000000..6b0f3ed
--- /dev/null
+++ b/include/asm-ia64/nodedata.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_NODEDATA_H
+#define _ASM_IA64_NODEDATA_H
+
+#include <linux/config.h>
+#include <linux/numa.h>
+
+#include <asm/percpu.h>
+#include <asm/mmzone.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Node Data. One of these structures is located on each node of a NUMA system.
+ */
+
+struct pglist_data;
+struct ia64_node_data {
+ short active_cpu_count;
+ short node;
+ struct pglist_data *pg_data_ptrs[MAX_NUMNODES];
+};
+
+
+/*
+ * Return a pointer to the node_data structure for the executing cpu.
+ */
+#define local_node_data (local_cpu_data->node_data)
+
+/*
+ * Given a node id, return a pointer to the pg_data_t for the node.
+ *
+ * NODE_DATA - should be used in all code not related to system
+ * initialization. It uses pernode data structures to minimize
+ * offnode memory references. However, these structure are not
+ * present during boot. This macro can be used once cpu_init
+ * completes.
+ */
+#define NODE_DATA(nid) (local_node_data->pg_data_ptrs[nid])
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_IA64_NODEDATA_H */
diff --git a/include/asm-ia64/numa.h b/include/asm-ia64/numa.h
new file mode 100644
index 0000000..3ae128f
--- /dev/null
+++ b/include/asm-ia64/numa.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file contains NUMA specific prototypes and definitions.
+ *
+ * 2002/08/05 Erich Focht <efocht@ess.nec.de>
+ *
+ */
+#ifndef _ASM_IA64_NUMA_H
+#define _ASM_IA64_NUMA_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_NUMA
+
+#include <linux/cache.h>
+#include <linux/cpumask.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+
+#include <asm/mmzone.h>
+
+extern u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
+extern cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
+
+/* Stuff below this line could be architecture independent */
+
+extern int num_node_memblks; /* total number of memory chunks */
+
+/*
+ * List of node memory chunks. Filled when parsing SRAT table to
+ * obtain information about memory nodes.
+*/
+
+struct node_memblk_s {
+ unsigned long start_paddr;
+ unsigned long size;
+ int nid; /* which logical node contains this chunk? */
+ int bank; /* which mem bank on this node */
+};
+
+struct node_cpuid_s {
+ u16 phys_id; /* id << 8 | eid */
+ int nid; /* logical node containing this CPU */
+};
+
+extern struct node_memblk_s node_memblk[NR_NODE_MEMBLKS];
+extern struct node_cpuid_s node_cpuid[NR_CPUS];
+
+/*
+ * ACPI 2.0 SLIT (System Locality Information Table)
+ * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
+ *
+ * This is a matrix with "distances" between nodes, they should be
+ * proportional to the memory access latency ratios.
+ */
+
+extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
+#define node_distance(from,to) (numa_slit[(from) * num_online_nodes() + (to)])
+
+extern int paddr_to_nid(unsigned long paddr);
+
+#define local_nodeid (cpu_to_node_map[smp_processor_id()])
+
+#else /* !CONFIG_NUMA */
+
+#define paddr_to_nid(addr) 0
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_IA64_NUMA_H */
diff --git a/include/asm-ia64/numnodes.h b/include/asm-ia64/numnodes.h
new file mode 100644
index 0000000..21cff4d
--- /dev/null
+++ b/include/asm-ia64/numnodes.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_MAX_NUMNODES_H
+#define _ASM_MAX_NUMNODES_H
+
+#ifdef CONFIG_IA64_DIG
+/* Max 8 Nodes */
+#define NODES_SHIFT 3
+#elif defined(CONFIG_IA64_HP_ZX1) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
+/* Max 32 Nodes */
+#define NODES_SHIFT 5
+#elif defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+/* Max 256 Nodes */
+#define NODES_SHIFT 8
+#endif
+
+#endif /* _ASM_MAX_NUMNODES_H */
diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h
new file mode 100644
index 0000000..24aab80
--- /dev/null
+++ b/include/asm-ia64/page.h
@@ -0,0 +1,207 @@
+#ifndef _ASM_IA64_PAGE_H
+#define _ASM_IA64_PAGE_H
+/*
+ * Pagetable related stuff.
+ *
+ * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/intrinsics.h>
+#include <asm/types.h>
+
+/*
+ * PAGE_SHIFT determines the actual kernel page size.
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define PAGE_SHIFT 12
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define PAGE_SHIFT 13
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define PAGE_SHIFT 14
+#elif defined(CONFIG_IA64_PAGE_SIZE_64KB)
+# define PAGE_SHIFT 16
+#else
+# error Unsupported page size!
+#endif
+
+#define PAGE_SIZE (__IA64_UL_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE - 1))
+#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+#define PERCPU_PAGE_SHIFT 16 /* log2() of max. size of per-CPU area */
+#define PERCPU_PAGE_SIZE (__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
+
+#define RGN_MAP_LIMIT ((1UL << (4*PAGE_SHIFT - 12)) - PAGE_SIZE) /* per region addr limit */
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define REGION_HPAGE (4UL) /* note: this is hardcoded in reload_context()!*/
+# define REGION_SHIFT 61
+# define HPAGE_REGION_BASE (REGION_HPAGE << REGION_SHIFT)
+# define HPAGE_SHIFT hpage_shift
+# define HPAGE_SHIFT_DEFAULT 28 /* check ia64 SDM for architecture supported size */
+# define HPAGE_SIZE (__IA64_UL_CONST(1) << HPAGE_SHIFT)
+# define HPAGE_MASK (~(HPAGE_SIZE - 1))
+
+# define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+# define ARCH_HAS_HUGEPAGE_ONLY_RANGE
+#endif /* CONFIG_HUGETLB_PAGE */
+
+#ifdef __ASSEMBLY__
+# define __pa(x) ((x) - PAGE_OFFSET)
+# define __va(x) ((x) + PAGE_OFFSET)
+#else /* !__ASSEMBLY */
+# ifdef __KERNEL__
+# define STRICT_MM_TYPECHECKS
+
+extern void clear_page (void *page);
+extern void copy_page (void *to, void *from);
+
+/*
+ * clear_user_page() and copy_user_page() can't be inline functions because
+ * flush_dcache_page() can't be defined until later...
+ */
+#define clear_user_page(addr, vaddr, page) \
+do { \
+ clear_page(addr); \
+ flush_dcache_page(page); \
+} while (0)
+
+#define copy_user_page(to, from, vaddr, page) \
+do { \
+ copy_page((to), (from)); \
+ flush_dcache_page(page); \
+} while (0)
+
+
+#define alloc_zeroed_user_highpage(vma, vaddr) \
+({ \
+ struct page *page = alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr); \
+ if (page) \
+ flush_dcache_page(page); \
+ page; \
+})
+
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+extern int ia64_pfn_valid (unsigned long pfn);
+#else
+# define ia64_pfn_valid(pfn) 1
+#endif
+
+#ifndef CONFIG_DISCONTIGMEM
+# define pfn_valid(pfn) (((pfn) < max_mapnr) && ia64_pfn_valid(pfn))
+# define page_to_pfn(page) ((unsigned long) (page - mem_map))
+# define pfn_to_page(pfn) (mem_map + (pfn))
+#else
+extern struct page *vmem_map;
+extern unsigned long max_low_pfn;
+# define pfn_valid(pfn) (((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
+# define page_to_pfn(page) ((unsigned long) (page - vmem_map))
+# define pfn_to_page(pfn) (vmem_map + (pfn))
+#endif
+
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+typedef union ia64_va {
+ struct {
+ unsigned long off : 61; /* intra-region offset */
+ unsigned long reg : 3; /* region number */
+ } f;
+ unsigned long l;
+ void *p;
+} ia64_va;
+
+/*
+ * Note: These macros depend on the fact that PAGE_OFFSET has all
+ * region bits set to 1 and all other bits set to zero. They are
+ * expressed in this way to ensure they result in a single "dep"
+ * instruction.
+ */
+#define __pa(x) ({ia64_va _v; _v.l = (long) (x); _v.f.reg = 0; _v.l;})
+#define __va(x) ({ia64_va _v; _v.l = (long) (x); _v.f.reg = -1; _v.p;})
+
+#define REGION_NUMBER(x) ({ia64_va _v; _v.l = (long) (x); _v.f.reg;})
+#define REGION_OFFSET(x) ({ia64_va _v; _v.l = (long) (x); _v.f.off;})
+
+#define REGION_SIZE REGION_NUMBER(1)
+#define REGION_KERNEL 7
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define htlbpage_to_page(x) (((unsigned long) REGION_NUMBER(x) << 61) \
+ | (REGION_OFFSET(x) >> (HPAGE_SHIFT-PAGE_SHIFT)))
+# define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+# define is_hugepage_only_range(mm, addr, len) \
+ (REGION_NUMBER(addr) == REGION_HPAGE && \
+ REGION_NUMBER((addr)+(len)) == REGION_HPAGE)
+extern unsigned int hpage_shift;
+#endif
+
+static __inline__ int
+get_order (unsigned long size)
+{
+ long double d = size - 1;
+ long order;
+
+ order = ia64_getf_exp(d);
+ order = order - PAGE_SHIFT - 0xffff + 1;
+ if (order < 0)
+ order = 0;
+ return order;
+}
+
+# endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+
+#ifdef STRICT_MM_TYPECHECKS
+ /*
+ * These are used to make use of C type-checking..
+ */
+ typedef struct { unsigned long pte; } pte_t;
+ typedef struct { unsigned long pmd; } pmd_t;
+ typedef struct { unsigned long pgd; } pgd_t;
+ typedef struct { unsigned long pgprot; } pgprot_t;
+
+# define pte_val(x) ((x).pte)
+# define pmd_val(x) ((x).pmd)
+# define pgd_val(x) ((x).pgd)
+# define pgprot_val(x) ((x).pgprot)
+
+# define __pte(x) ((pte_t) { (x) } )
+# define __pgprot(x) ((pgprot_t) { (x) } )
+
+#else /* !STRICT_MM_TYPECHECKS */
+ /*
+ * .. while these make it easier on the compiler
+ */
+# ifndef __ASSEMBLY__
+ typedef unsigned long pte_t;
+ typedef unsigned long pmd_t;
+ typedef unsigned long pgd_t;
+ typedef unsigned long pgprot_t;
+# endif
+
+# define pte_val(x) (x)
+# define pmd_val(x) (x)
+# define pgd_val(x) (x)
+# define pgprot_val(x) (x)
+
+# define __pte(x) (x)
+# define __pgd(x) (x)
+# define __pgprot(x) (x)
+#endif /* !STRICT_MM_TYPECHECKS */
+
+#define PAGE_OFFSET __IA64_UL_CONST(0xe000000000000000)
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | \
+ (((current->personality & READ_IMPLIES_EXEC) != 0) \
+ ? VM_EXEC : 0))
+
+#endif /* _ASM_IA64_PAGE_H */
diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h
new file mode 100644
index 0000000..5dd477f
--- /dev/null
+++ b/include/asm-ia64/pal.h
@@ -0,0 +1,1564 @@
+#ifndef _ASM_IA64_PAL_H
+#define _ASM_IA64_PAL_H
+
+/*
+ * Processor Abstraction Layer definitions.
+ *
+ * This is based on Intel IA-64 Architecture Software Developer's Manual rev 1.0
+ * chapter 11 IA-64 Processor Abstraction Layer
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ *
+ * 99/10/01 davidm Make sure we pass zero for reserved parameters.
+ * 00/03/07 davidm Updated pal_cache_flush() to be in sync with PAL v2.6.
+ * 00/03/23 cfleck Modified processor min-state save area to match updated PAL & SAL info
+ * 00/05/24 eranian Updated to latest PAL spec, fix structures bugs, added
+ * 00/05/25 eranian Support for stack calls, and static physical calls
+ * 00/06/18 eranian Support for stacked physical calls
+ */
+
+/*
+ * Note that some of these calls use a static-register only calling
+ * convention which has nothing to do with the regular calling
+ * convention.
+ */
+#define PAL_CACHE_FLUSH 1 /* flush i/d cache */
+#define PAL_CACHE_INFO 2 /* get detailed i/d cache info */
+#define PAL_CACHE_INIT 3 /* initialize i/d cache */
+#define PAL_CACHE_SUMMARY 4 /* get summary of cache heirarchy */
+#define PAL_MEM_ATTRIB 5 /* list supported memory attributes */
+#define PAL_PTCE_INFO 6 /* purge TLB info */
+#define PAL_VM_INFO 7 /* return supported virtual memory features */
+#define PAL_VM_SUMMARY 8 /* return summary on supported vm features */
+#define PAL_BUS_GET_FEATURES 9 /* return processor bus interface features settings */
+#define PAL_BUS_SET_FEATURES 10 /* set processor bus features */
+#define PAL_DEBUG_INFO 11 /* get number of debug registers */
+#define PAL_FIXED_ADDR 12 /* get fixed component of processors's directed address */
+#define PAL_FREQ_BASE 13 /* base frequency of the platform */
+#define PAL_FREQ_RATIOS 14 /* ratio of processor, bus and ITC frequency */
+#define PAL_PERF_MON_INFO 15 /* return performance monitor info */
+#define PAL_PLATFORM_ADDR 16 /* set processor interrupt block and IO port space addr */
+#define PAL_PROC_GET_FEATURES 17 /* get configurable processor features & settings */
+#define PAL_PROC_SET_FEATURES 18 /* enable/disable configurable processor features */
+#define PAL_RSE_INFO 19 /* return rse information */
+#define PAL_VERSION 20 /* return version of PAL code */
+#define PAL_MC_CLEAR_LOG 21 /* clear all processor log info */
+#define PAL_MC_DRAIN 22 /* drain operations which could result in an MCA */
+#define PAL_MC_EXPECTED 23 /* set/reset expected MCA indicator */
+#define PAL_MC_DYNAMIC_STATE 24 /* get processor dynamic state */
+#define PAL_MC_ERROR_INFO 25 /* get processor MCA info and static state */
+#define PAL_MC_RESUME 26 /* Return to interrupted process */
+#define PAL_MC_REGISTER_MEM 27 /* Register memory for PAL to use during MCAs and inits */
+#define PAL_HALT 28 /* enter the low power HALT state */
+#define PAL_HALT_LIGHT 29 /* enter the low power light halt state*/
+#define PAL_COPY_INFO 30 /* returns info needed to relocate PAL */
+#define PAL_CACHE_LINE_INIT 31 /* init tags & data of cache line */
+#define PAL_PMI_ENTRYPOINT 32 /* register PMI memory entry points with the processor */
+#define PAL_ENTER_IA_32_ENV 33 /* enter IA-32 system environment */
+#define PAL_VM_PAGE_SIZE 34 /* return vm TC and page walker page sizes */
+
+#define PAL_MEM_FOR_TEST 37 /* get amount of memory needed for late processor test */
+#define PAL_CACHE_PROT_INFO 38 /* get i/d cache protection info */
+#define PAL_REGISTER_INFO 39 /* return AR and CR register information*/
+#define PAL_SHUTDOWN 40 /* enter processor shutdown state */
+#define PAL_PREFETCH_VISIBILITY 41 /* Make Processor Prefetches Visible */
+
+#define PAL_COPY_PAL 256 /* relocate PAL procedures and PAL PMI */
+#define PAL_HALT_INFO 257 /* return the low power capabilities of processor */
+#define PAL_TEST_PROC 258 /* perform late processor self-test */
+#define PAL_CACHE_READ 259 /* read tag & data of cacheline for diagnostic testing */
+#define PAL_CACHE_WRITE 260 /* write tag & data of cacheline for diagnostic testing */
+#define PAL_VM_TR_READ 261 /* read contents of translation register */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/fpu.h>
+
+/*
+ * Data types needed to pass information into PAL procedures and
+ * interpret information returned by them.
+ */
+
+/* Return status from the PAL procedure */
+typedef s64 pal_status_t;
+
+#define PAL_STATUS_SUCCESS 0 /* No error */
+#define PAL_STATUS_UNIMPLEMENTED (-1) /* Unimplemented procedure */
+#define PAL_STATUS_EINVAL (-2) /* Invalid argument */
+#define PAL_STATUS_ERROR (-3) /* Error */
+#define PAL_STATUS_CACHE_INIT_FAIL (-4) /* Could not initialize the
+ * specified level and type of
+ * cache without sideeffects
+ * and "restrict" was 1
+ */
+
+/* Processor cache level in the heirarchy */
+typedef u64 pal_cache_level_t;
+#define PAL_CACHE_LEVEL_L0 0 /* L0 */
+#define PAL_CACHE_LEVEL_L1 1 /* L1 */
+#define PAL_CACHE_LEVEL_L2 2 /* L2 */
+
+
+/* Processor cache type at a particular level in the heirarchy */
+
+typedef u64 pal_cache_type_t;
+#define PAL_CACHE_TYPE_INSTRUCTION 1 /* Instruction cache */
+#define PAL_CACHE_TYPE_DATA 2 /* Data or unified cache */
+#define PAL_CACHE_TYPE_INSTRUCTION_DATA 3 /* Both Data & Instruction */
+
+
+#define PAL_CACHE_FLUSH_INVALIDATE 1 /* Invalidate clean lines */
+#define PAL_CACHE_FLUSH_CHK_INTRS 2 /* check for interrupts/mc while flushing */
+
+/* Processor cache line size in bytes */
+typedef int pal_cache_line_size_t;
+
+/* Processor cache line state */
+typedef u64 pal_cache_line_state_t;
+#define PAL_CACHE_LINE_STATE_INVALID 0 /* Invalid */
+#define PAL_CACHE_LINE_STATE_SHARED 1 /* Shared */
+#define PAL_CACHE_LINE_STATE_EXCLUSIVE 2 /* Exclusive */
+#define PAL_CACHE_LINE_STATE_MODIFIED 3 /* Modified */
+
+typedef struct pal_freq_ratio {
+ u64 den : 32, num : 32; /* numerator & denominator */
+} itc_ratio, proc_ratio;
+
+typedef union pal_cache_config_info_1_s {
+ struct {
+ u64 u : 1, /* 0 Unified cache ? */
+ at : 2, /* 2-1 Cache mem attr*/
+ reserved : 5, /* 7-3 Reserved */
+ associativity : 8, /* 16-8 Associativity*/
+ line_size : 8, /* 23-17 Line size */
+ stride : 8, /* 31-24 Stride */
+ store_latency : 8, /*39-32 Store latency*/
+ load_latency : 8, /* 47-40 Load latency*/
+ store_hints : 8, /* 55-48 Store hints*/
+ load_hints : 8; /* 63-56 Load hints */
+ } pcci1_bits;
+ u64 pcci1_data;
+} pal_cache_config_info_1_t;
+
+typedef union pal_cache_config_info_2_s {
+ struct {
+ u64 cache_size : 32, /*cache size in bytes*/
+
+
+ alias_boundary : 8, /* 39-32 aliased addr
+ * separation for max
+ * performance.
+ */
+ tag_ls_bit : 8, /* 47-40 LSb of addr*/
+ tag_ms_bit : 8, /* 55-48 MSb of addr*/
+ reserved : 8; /* 63-56 Reserved */
+ } pcci2_bits;
+ u64 pcci2_data;
+} pal_cache_config_info_2_t;
+
+
+typedef struct pal_cache_config_info_s {
+ pal_status_t pcci_status;
+ pal_cache_config_info_1_t pcci_info_1;
+ pal_cache_config_info_2_t pcci_info_2;
+ u64 pcci_reserved;
+} pal_cache_config_info_t;
+
+#define pcci_ld_hints pcci_info_1.pcci1_bits.load_hints
+#define pcci_st_hints pcci_info_1.pcci1_bits.store_hints
+#define pcci_ld_latency pcci_info_1.pcci1_bits.load_latency
+#define pcci_st_latency pcci_info_1.pcci1_bits.store_latency
+#define pcci_stride pcci_info_1.pcci1_bits.stride
+#define pcci_line_size pcci_info_1.pcci1_bits.line_size
+#define pcci_assoc pcci_info_1.pcci1_bits.associativity
+#define pcci_cache_attr pcci_info_1.pcci1_bits.at
+#define pcci_unified pcci_info_1.pcci1_bits.u
+#define pcci_tag_msb pcci_info_2.pcci2_bits.tag_ms_bit
+#define pcci_tag_lsb pcci_info_2.pcci2_bits.tag_ls_bit
+#define pcci_alias_boundary pcci_info_2.pcci2_bits.alias_boundary
+#define pcci_cache_size pcci_info_2.pcci2_bits.cache_size
+
+
+
+/* Possible values for cache attributes */
+
+#define PAL_CACHE_ATTR_WT 0 /* Write through cache */
+#define PAL_CACHE_ATTR_WB 1 /* Write back cache */
+#define PAL_CACHE_ATTR_WT_OR_WB 2 /* Either write thru or write
+ * back depending on TLB
+ * memory attributes
+ */
+
+
+/* Possible values for cache hints */
+
+#define PAL_CACHE_HINT_TEMP_1 0 /* Temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_1 1 /* Non-temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_ALL 3 /* Non-temporal all levels */
+
+/* Processor cache protection information */
+typedef union pal_cache_protection_element_u {
+ u32 pcpi_data;
+ struct {
+ u32 data_bits : 8, /* # data bits covered by
+ * each unit of protection
+ */
+
+ tagprot_lsb : 6, /* Least -do- */
+ tagprot_msb : 6, /* Most Sig. tag address
+ * bit that this
+ * protection covers.
+ */
+ prot_bits : 6, /* # of protection bits */
+ method : 4, /* Protection method */
+ t_d : 2; /* Indicates which part
+ * of the cache this
+ * protection encoding
+ * applies.
+ */
+ } pcp_info;
+} pal_cache_protection_element_t;
+
+#define pcpi_cache_prot_part pcp_info.t_d
+#define pcpi_prot_method pcp_info.method
+#define pcpi_prot_bits pcp_info.prot_bits
+#define pcpi_tagprot_msb pcp_info.tagprot_msb
+#define pcpi_tagprot_lsb pcp_info.tagprot_lsb
+#define pcpi_data_bits pcp_info.data_bits
+
+/* Processor cache part encodings */
+#define PAL_CACHE_PROT_PART_DATA 0 /* Data protection */
+#define PAL_CACHE_PROT_PART_TAG 1 /* Tag protection */
+#define PAL_CACHE_PROT_PART_TAG_DATA 2 /* Tag+data protection (tag is
+ * more significant )
+ */
+#define PAL_CACHE_PROT_PART_DATA_TAG 3 /* Data+tag protection (data is
+ * more significant )
+ */
+#define PAL_CACHE_PROT_PART_MAX 6
+
+
+typedef struct pal_cache_protection_info_s {
+ pal_status_t pcpi_status;
+ pal_cache_protection_element_t pcp_info[PAL_CACHE_PROT_PART_MAX];
+} pal_cache_protection_info_t;
+
+
+/* Processor cache protection method encodings */
+#define PAL_CACHE_PROT_METHOD_NONE 0 /* No protection */
+#define PAL_CACHE_PROT_METHOD_ODD_PARITY 1 /* Odd parity */
+#define PAL_CACHE_PROT_METHOD_EVEN_PARITY 2 /* Even parity */
+#define PAL_CACHE_PROT_METHOD_ECC 3 /* ECC protection */
+
+
+/* Processor cache line identification in the heirarchy */
+typedef union pal_cache_line_id_u {
+ u64 pclid_data;
+ struct {
+ u64 cache_type : 8, /* 7-0 cache type */
+ level : 8, /* 15-8 level of the
+ * cache in the
+ * heirarchy.
+ */
+ way : 8, /* 23-16 way in the set
+ */
+ part : 8, /* 31-24 part of the
+ * cache
+ */
+ reserved : 32; /* 63-32 is reserved*/
+ } pclid_info_read;
+ struct {
+ u64 cache_type : 8, /* 7-0 cache type */
+ level : 8, /* 15-8 level of the
+ * cache in the
+ * heirarchy.
+ */
+ way : 8, /* 23-16 way in the set
+ */
+ part : 8, /* 31-24 part of the
+ * cache
+ */
+ mesi : 8, /* 39-32 cache line
+ * state
+ */
+ start : 8, /* 47-40 lsb of data to
+ * invert
+ */
+ length : 8, /* 55-48 #bits to
+ * invert
+ */
+ trigger : 8; /* 63-56 Trigger error
+ * by doing a load
+ * after the write
+ */
+
+ } pclid_info_write;
+} pal_cache_line_id_u_t;
+
+#define pclid_read_part pclid_info_read.part
+#define pclid_read_way pclid_info_read.way
+#define pclid_read_level pclid_info_read.level
+#define pclid_read_cache_type pclid_info_read.cache_type
+
+#define pclid_write_trigger pclid_info_write.trigger
+#define pclid_write_length pclid_info_write.length
+#define pclid_write_start pclid_info_write.start
+#define pclid_write_mesi pclid_info_write.mesi
+#define pclid_write_part pclid_info_write.part
+#define pclid_write_way pclid_info_write.way
+#define pclid_write_level pclid_info_write.level
+#define pclid_write_cache_type pclid_info_write.cache_type
+
+/* Processor cache line part encodings */
+#define PAL_CACHE_LINE_ID_PART_DATA 0 /* Data */
+#define PAL_CACHE_LINE_ID_PART_TAG 1 /* Tag */
+#define PAL_CACHE_LINE_ID_PART_DATA_PROT 2 /* Data protection */
+#define PAL_CACHE_LINE_ID_PART_TAG_PROT 3 /* Tag protection */
+#define PAL_CACHE_LINE_ID_PART_DATA_TAG_PROT 4 /* Data+tag
+ * protection
+ */
+typedef struct pal_cache_line_info_s {
+ pal_status_t pcli_status; /* Return status of the read cache line
+ * info call.
+ */
+ u64 pcli_data; /* 64-bit data, tag, protection bits .. */
+ u64 pcli_data_len; /* data length in bits */
+ pal_cache_line_state_t pcli_cache_line_state; /* mesi state */
+
+} pal_cache_line_info_t;
+
+
+/* Machine Check related crap */
+
+/* Pending event status bits */
+typedef u64 pal_mc_pending_events_t;
+
+#define PAL_MC_PENDING_MCA (1 << 0)
+#define PAL_MC_PENDING_INIT (1 << 1)
+
+/* Error information type */
+typedef u64 pal_mc_info_index_t;
+
+#define PAL_MC_INFO_PROCESSOR 0 /* Processor */
+#define PAL_MC_INFO_CACHE_CHECK 1 /* Cache check */
+#define PAL_MC_INFO_TLB_CHECK 2 /* Tlb check */
+#define PAL_MC_INFO_BUS_CHECK 3 /* Bus check */
+#define PAL_MC_INFO_REQ_ADDR 4 /* Requestor address */
+#define PAL_MC_INFO_RESP_ADDR 5 /* Responder address */
+#define PAL_MC_INFO_TARGET_ADDR 6 /* Target address */
+#define PAL_MC_INFO_IMPL_DEP 7 /* Implementation
+ * dependent
+ */
+
+
+typedef struct pal_process_state_info_s {
+ u64 reserved1 : 2,
+ rz : 1, /* PAL_CHECK processor
+ * rendezvous
+ * successful.
+ */
+
+ ra : 1, /* PAL_CHECK attempted
+ * a rendezvous.
+ */
+ me : 1, /* Distinct multiple
+ * errors occurred
+ */
+
+ mn : 1, /* Min. state save
+ * area has been
+ * registered with PAL
+ */
+
+ sy : 1, /* Storage integrity
+ * synched
+ */
+
+
+ co : 1, /* Continuable */
+ ci : 1, /* MC isolated */
+ us : 1, /* Uncontained storage
+ * damage.
+ */
+
+
+ hd : 1, /* Non-essential hw
+ * lost (no loss of
+ * functionality)
+ * causing the
+ * processor to run in
+ * degraded mode.
+ */
+
+ tl : 1, /* 1 => MC occurred
+ * after an instr was
+ * executed but before
+ * the trap that
+ * resulted from instr
+ * execution was
+ * generated.
+ * (Trap Lost )
+ */
+ mi : 1, /* More information available
+ * call PAL_MC_ERROR_INFO
+ */
+ pi : 1, /* Precise instruction pointer */
+ pm : 1, /* Precise min-state save area */
+
+ dy : 1, /* Processor dynamic
+ * state valid
+ */
+
+
+ in : 1, /* 0 = MC, 1 = INIT */
+ rs : 1, /* RSE valid */
+ cm : 1, /* MC corrected */
+ ex : 1, /* MC is expected */
+ cr : 1, /* Control regs valid*/
+ pc : 1, /* Perf cntrs valid */
+ dr : 1, /* Debug regs valid */
+ tr : 1, /* Translation regs
+ * valid
+ */
+ rr : 1, /* Region regs valid */
+ ar : 1, /* App regs valid */
+ br : 1, /* Branch regs valid */
+ pr : 1, /* Predicate registers
+ * valid
+ */
+
+ fp : 1, /* fp registers valid*/
+ b1 : 1, /* Preserved bank one
+ * general registers
+ * are valid
+ */
+ b0 : 1, /* Preserved bank zero
+ * general registers
+ * are valid
+ */
+ gr : 1, /* General registers
+ * are valid
+ * (excl. banked regs)
+ */
+ dsize : 16, /* size of dynamic
+ * state returned
+ * by the processor
+ */
+
+ reserved2 : 11,
+ cc : 1, /* Cache check */
+ tc : 1, /* TLB check */
+ bc : 1, /* Bus check */
+ rc : 1, /* Register file check */
+ uc : 1; /* Uarch check */
+
+} pal_processor_state_info_t;
+
+typedef struct pal_cache_check_info_s {
+ u64 op : 4, /* Type of cache
+ * operation that
+ * caused the machine
+ * check.
+ */
+ level : 2, /* Cache level */
+ reserved1 : 2,
+ dl : 1, /* Failure in data part
+ * of cache line
+ */
+ tl : 1, /* Failure in tag part
+ * of cache line
+ */
+ dc : 1, /* Failure in dcache */
+ ic : 1, /* Failure in icache */
+ mesi : 3, /* Cache line state */
+ mv : 1, /* mesi valid */
+ way : 5, /* Way in which the
+ * error occurred
+ */
+ wiv : 1, /* Way field valid */
+ reserved2 : 10,
+
+ index : 20, /* Cache line index */
+ reserved3 : 2,
+
+ is : 1, /* instruction set (1 == ia32) */
+ iv : 1, /* instruction set field valid */
+ pl : 2, /* privilege level */
+ pv : 1, /* privilege level field valid */
+ mcc : 1, /* Machine check corrected */
+ tv : 1, /* Target address
+ * structure is valid
+ */
+ rq : 1, /* Requester identifier
+ * structure is valid
+ */
+ rp : 1, /* Responder identifier
+ * structure is valid
+ */
+ pi : 1; /* Precise instruction pointer
+ * structure is valid
+ */
+} pal_cache_check_info_t;
+
+typedef struct pal_tlb_check_info_s {
+
+ u64 tr_slot : 8, /* Slot# of TR where
+ * error occurred
+ */
+ trv : 1, /* tr_slot field is valid */
+ reserved1 : 1,
+ level : 2, /* TLB level where failure occurred */
+ reserved2 : 4,
+ dtr : 1, /* Fail in data TR */
+ itr : 1, /* Fail in inst TR */
+ dtc : 1, /* Fail in data TC */
+ itc : 1, /* Fail in inst. TC */
+ op : 4, /* Cache operation */
+ reserved3 : 30,
+
+ is : 1, /* instruction set (1 == ia32) */
+ iv : 1, /* instruction set field valid */
+ pl : 2, /* privilege level */
+ pv : 1, /* privilege level field valid */
+ mcc : 1, /* Machine check corrected */
+ tv : 1, /* Target address
+ * structure is valid
+ */
+ rq : 1, /* Requester identifier
+ * structure is valid
+ */
+ rp : 1, /* Responder identifier
+ * structure is valid
+ */
+ pi : 1; /* Precise instruction pointer
+ * structure is valid
+ */
+} pal_tlb_check_info_t;
+
+typedef struct pal_bus_check_info_s {
+ u64 size : 5, /* Xaction size */
+ ib : 1, /* Internal bus error */
+ eb : 1, /* External bus error */
+ cc : 1, /* Error occurred
+ * during cache-cache
+ * transfer.
+ */
+ type : 8, /* Bus xaction type*/
+ sev : 5, /* Bus error severity*/
+ hier : 2, /* Bus hierarchy level */
+ reserved1 : 1,
+ bsi : 8, /* Bus error status
+ * info
+ */
+ reserved2 : 22,
+
+ is : 1, /* instruction set (1 == ia32) */
+ iv : 1, /* instruction set field valid */
+ pl : 2, /* privilege level */
+ pv : 1, /* privilege level field valid */
+ mcc : 1, /* Machine check corrected */
+ tv : 1, /* Target address
+ * structure is valid
+ */
+ rq : 1, /* Requester identifier
+ * structure is valid
+ */
+ rp : 1, /* Responder identifier
+ * structure is valid
+ */
+ pi : 1; /* Precise instruction pointer
+ * structure is valid
+ */
+} pal_bus_check_info_t;
+
+typedef struct pal_reg_file_check_info_s {
+ u64 id : 4, /* Register file identifier */
+ op : 4, /* Type of register
+ * operation that
+ * caused the machine
+ * check.
+ */
+ reg_num : 7, /* Register number */
+ rnv : 1, /* reg_num valid */
+ reserved2 : 38,
+
+ is : 1, /* instruction set (1 == ia32) */
+ iv : 1, /* instruction set field valid */
+ pl : 2, /* privilege level */
+ pv : 1, /* privilege level field valid */
+ mcc : 1, /* Machine check corrected */
+ reserved3 : 3,
+ pi : 1; /* Precise instruction pointer
+ * structure is valid
+ */
+} pal_reg_file_check_info_t;
+
+typedef struct pal_uarch_check_info_s {
+ u64 sid : 5, /* Structure identification */
+ level : 3, /* Level of failure */
+ array_id : 4, /* Array identification */
+ op : 4, /* Type of
+ * operation that
+ * caused the machine
+ * check.
+ */
+ way : 6, /* Way of structure */
+ wv : 1, /* way valid */
+ xv : 1, /* index valid */
+ reserved1 : 8,
+ index : 8, /* Index or set of the uarch
+ * structure that failed.
+ */
+ reserved2 : 24,
+
+ is : 1, /* instruction set (1 == ia32) */
+ iv : 1, /* instruction set field valid */
+ pl : 2, /* privilege level */
+ pv : 1, /* privilege level field valid */
+ mcc : 1, /* Machine check corrected */
+ tv : 1, /* Target address
+ * structure is valid
+ */
+ rq : 1, /* Requester identifier
+ * structure is valid
+ */
+ rp : 1, /* Responder identifier
+ * structure is valid
+ */
+ pi : 1; /* Precise instruction pointer
+ * structure is valid
+ */
+} pal_uarch_check_info_t;
+
+typedef union pal_mc_error_info_u {
+ u64 pmei_data;
+ pal_processor_state_info_t pme_processor;
+ pal_cache_check_info_t pme_cache;
+ pal_tlb_check_info_t pme_tlb;
+ pal_bus_check_info_t pme_bus;
+ pal_reg_file_check_info_t pme_reg_file;
+ pal_uarch_check_info_t pme_uarch;
+} pal_mc_error_info_t;
+
+#define pmci_proc_unknown_check pme_processor.uc
+#define pmci_proc_bus_check pme_processor.bc
+#define pmci_proc_tlb_check pme_processor.tc
+#define pmci_proc_cache_check pme_processor.cc
+#define pmci_proc_dynamic_state_size pme_processor.dsize
+#define pmci_proc_gpr_valid pme_processor.gr
+#define pmci_proc_preserved_bank0_gpr_valid pme_processor.b0
+#define pmci_proc_preserved_bank1_gpr_valid pme_processor.b1
+#define pmci_proc_fp_valid pme_processor.fp
+#define pmci_proc_predicate_regs_valid pme_processor.pr
+#define pmci_proc_branch_regs_valid pme_processor.br
+#define pmci_proc_app_regs_valid pme_processor.ar
+#define pmci_proc_region_regs_valid pme_processor.rr
+#define pmci_proc_translation_regs_valid pme_processor.tr
+#define pmci_proc_debug_regs_valid pme_processor.dr
+#define pmci_proc_perf_counters_valid pme_processor.pc
+#define pmci_proc_control_regs_valid pme_processor.cr
+#define pmci_proc_machine_check_expected pme_processor.ex
+#define pmci_proc_machine_check_corrected pme_processor.cm
+#define pmci_proc_rse_valid pme_processor.rs
+#define pmci_proc_machine_check_or_init pme_processor.in
+#define pmci_proc_dynamic_state_valid pme_processor.dy
+#define pmci_proc_operation pme_processor.op
+#define pmci_proc_trap_lost pme_processor.tl
+#define pmci_proc_hardware_damage pme_processor.hd
+#define pmci_proc_uncontained_storage_damage pme_processor.us
+#define pmci_proc_machine_check_isolated pme_processor.ci
+#define pmci_proc_continuable pme_processor.co
+#define pmci_proc_storage_intergrity_synced pme_processor.sy
+#define pmci_proc_min_state_save_area_regd pme_processor.mn
+#define pmci_proc_distinct_multiple_errors pme_processor.me
+#define pmci_proc_pal_attempted_rendezvous pme_processor.ra
+#define pmci_proc_pal_rendezvous_complete pme_processor.rz
+
+
+#define pmci_cache_level pme_cache.level
+#define pmci_cache_line_state pme_cache.mesi
+#define pmci_cache_line_state_valid pme_cache.mv
+#define pmci_cache_line_index pme_cache.index
+#define pmci_cache_instr_cache_fail pme_cache.ic
+#define pmci_cache_data_cache_fail pme_cache.dc
+#define pmci_cache_line_tag_fail pme_cache.tl
+#define pmci_cache_line_data_fail pme_cache.dl
+#define pmci_cache_operation pme_cache.op
+#define pmci_cache_way_valid pme_cache.wv
+#define pmci_cache_target_address_valid pme_cache.tv
+#define pmci_cache_way pme_cache.way
+#define pmci_cache_mc pme_cache.mc
+
+#define pmci_tlb_instr_translation_cache_fail pme_tlb.itc
+#define pmci_tlb_data_translation_cache_fail pme_tlb.dtc
+#define pmci_tlb_instr_translation_reg_fail pme_tlb.itr
+#define pmci_tlb_data_translation_reg_fail pme_tlb.dtr
+#define pmci_tlb_translation_reg_slot pme_tlb.tr_slot
+#define pmci_tlb_mc pme_tlb.mc
+
+#define pmci_bus_status_info pme_bus.bsi
+#define pmci_bus_req_address_valid pme_bus.rq
+#define pmci_bus_resp_address_valid pme_bus.rp
+#define pmci_bus_target_address_valid pme_bus.tv
+#define pmci_bus_error_severity pme_bus.sev
+#define pmci_bus_transaction_type pme_bus.type
+#define pmci_bus_cache_cache_transfer pme_bus.cc
+#define pmci_bus_transaction_size pme_bus.size
+#define pmci_bus_internal_error pme_bus.ib
+#define pmci_bus_external_error pme_bus.eb
+#define pmci_bus_mc pme_bus.mc
+
+/*
+ * NOTE: this min_state_save area struct only includes the 1KB
+ * architectural state save area. The other 3 KB is scratch space
+ * for PAL.
+ */
+
+typedef struct pal_min_state_area_s {
+ u64 pmsa_nat_bits; /* nat bits for saved GRs */
+ u64 pmsa_gr[15]; /* GR1 - GR15 */
+ u64 pmsa_bank0_gr[16]; /* GR16 - GR31 */
+ u64 pmsa_bank1_gr[16]; /* GR16 - GR31 */
+ u64 pmsa_pr; /* predicate registers */
+ u64 pmsa_br0; /* branch register 0 */
+ u64 pmsa_rsc; /* ar.rsc */
+ u64 pmsa_iip; /* cr.iip */
+ u64 pmsa_ipsr; /* cr.ipsr */
+ u64 pmsa_ifs; /* cr.ifs */
+ u64 pmsa_xip; /* previous iip */
+ u64 pmsa_xpsr; /* previous psr */
+ u64 pmsa_xfs; /* previous ifs */
+ u64 pmsa_br1; /* branch register 1 */
+ u64 pmsa_reserved[70]; /* pal_min_state_area should total to 1KB */
+} pal_min_state_area_t;
+
+
+struct ia64_pal_retval {
+ /*
+ * A zero status value indicates call completed without error.
+ * A negative status value indicates reason of call failure.
+ * A positive status value indicates success but an
+ * informational value should be printed (e.g., "reboot for
+ * change to take effect").
+ */
+ s64 status;
+ u64 v0;
+ u64 v1;
+ u64 v2;
+};
+
+/*
+ * Note: Currently unused PAL arguments are generally labeled
+ * "reserved" so the value specified in the PAL documentation
+ * (generally 0) MUST be passed. Reserved parameters are not optional
+ * parameters.
+ */
+extern struct ia64_pal_retval ia64_pal_call_static (u64, u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_stacked (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_static (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_stacked (u64, u64, u64, u64);
+extern void ia64_save_scratch_fpregs (struct ia64_fpreg *);
+extern void ia64_load_scratch_fpregs (struct ia64_fpreg *);
+
+#define PAL_CALL(iprv,a0,a1,a2,a3) do { \
+ struct ia64_fpreg fr[6]; \
+ ia64_save_scratch_fpregs(fr); \
+ iprv = ia64_pal_call_static(a0, a1, a2, a3, 0); \
+ ia64_load_scratch_fpregs(fr); \
+} while (0)
+
+#define PAL_CALL_IC_OFF(iprv,a0,a1,a2,a3) do { \
+ struct ia64_fpreg fr[6]; \
+ ia64_save_scratch_fpregs(fr); \
+ iprv = ia64_pal_call_static(a0, a1, a2, a3, 1); \
+ ia64_load_scratch_fpregs(fr); \
+} while (0)
+
+#define PAL_CALL_STK(iprv,a0,a1,a2,a3) do { \
+ struct ia64_fpreg fr[6]; \
+ ia64_save_scratch_fpregs(fr); \
+ iprv = ia64_pal_call_stacked(a0, a1, a2, a3); \
+ ia64_load_scratch_fpregs(fr); \
+} while (0)
+
+#define PAL_CALL_PHYS(iprv,a0,a1,a2,a3) do { \
+ struct ia64_fpreg fr[6]; \
+ ia64_save_scratch_fpregs(fr); \
+ iprv = ia64_pal_call_phys_static(a0, a1, a2, a3); \
+ ia64_load_scratch_fpregs(fr); \
+} while (0)
+
+#define PAL_CALL_PHYS_STK(iprv,a0,a1,a2,a3) do { \
+ struct ia64_fpreg fr[6]; \
+ ia64_save_scratch_fpregs(fr); \
+ iprv = ia64_pal_call_phys_stacked(a0, a1, a2, a3); \
+ ia64_load_scratch_fpregs(fr); \
+} while (0)
+
+typedef int (*ia64_pal_handler) (u64, ...);
+extern ia64_pal_handler ia64_pal;
+extern void ia64_pal_handler_init (void *);
+
+extern ia64_pal_handler ia64_pal;
+
+extern pal_cache_config_info_t l0d_cache_config_info;
+extern pal_cache_config_info_t l0i_cache_config_info;
+extern pal_cache_config_info_t l1_cache_config_info;
+extern pal_cache_config_info_t l2_cache_config_info;
+
+extern pal_cache_protection_info_t l0d_cache_protection_info;
+extern pal_cache_protection_info_t l0i_cache_protection_info;
+extern pal_cache_protection_info_t l1_cache_protection_info;
+extern pal_cache_protection_info_t l2_cache_protection_info;
+
+extern pal_cache_config_info_t pal_cache_config_info_get(pal_cache_level_t,
+ pal_cache_type_t);
+
+extern pal_cache_protection_info_t pal_cache_protection_info_get(pal_cache_level_t,
+ pal_cache_type_t);
+
+
+extern void pal_error(int);
+
+
+/* Useful wrappers for the current list of pal procedures */
+
+typedef union pal_bus_features_u {
+ u64 pal_bus_features_val;
+ struct {
+ u64 pbf_reserved1 : 29;
+ u64 pbf_req_bus_parking : 1;
+ u64 pbf_bus_lock_mask : 1;
+ u64 pbf_enable_half_xfer_rate : 1;
+ u64 pbf_reserved2 : 22;
+ u64 pbf_disable_xaction_queueing : 1;
+ u64 pbf_disable_resp_err_check : 1;
+ u64 pbf_disable_berr_check : 1;
+ u64 pbf_disable_bus_req_internal_err_signal : 1;
+ u64 pbf_disable_bus_req_berr_signal : 1;
+ u64 pbf_disable_bus_init_event_check : 1;
+ u64 pbf_disable_bus_init_event_signal : 1;
+ u64 pbf_disable_bus_addr_err_check : 1;
+ u64 pbf_disable_bus_addr_err_signal : 1;
+ u64 pbf_disable_bus_data_err_check : 1;
+ } pal_bus_features_s;
+} pal_bus_features_u_t;
+
+extern void pal_bus_features_print (u64);
+
+/* Provide information about configurable processor bus features */
+static inline s64
+ia64_pal_bus_get_features (pal_bus_features_u_t *features_avail,
+ pal_bus_features_u_t *features_status,
+ pal_bus_features_u_t *features_control)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_PHYS(iprv, PAL_BUS_GET_FEATURES, 0, 0, 0);
+ if (features_avail)
+ features_avail->pal_bus_features_val = iprv.v0;
+ if (features_status)
+ features_status->pal_bus_features_val = iprv.v1;
+ if (features_control)
+ features_control->pal_bus_features_val = iprv.v2;
+ return iprv.status;
+}
+
+/* Enables/disables specific processor bus features */
+static inline s64
+ia64_pal_bus_set_features (pal_bus_features_u_t feature_select)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_PHYS(iprv, PAL_BUS_SET_FEATURES, feature_select.pal_bus_features_val, 0, 0);
+ return iprv.status;
+}
+
+/* Get detailed cache information */
+static inline s64
+ia64_pal_cache_config_info (u64 cache_level, u64 cache_type, pal_cache_config_info_t *conf)
+{
+ struct ia64_pal_retval iprv;
+
+ PAL_CALL(iprv, PAL_CACHE_INFO, cache_level, cache_type, 0);
+
+ if (iprv.status == 0) {
+ conf->pcci_status = iprv.status;
+ conf->pcci_info_1.pcci1_data = iprv.v0;
+ conf->pcci_info_2.pcci2_data = iprv.v1;
+ conf->pcci_reserved = iprv.v2;
+ }
+ return iprv.status;
+
+}
+
+/* Get detailed cche protection information */
+static inline s64
+ia64_pal_cache_prot_info (u64 cache_level, u64 cache_type, pal_cache_protection_info_t *prot)
+{
+ struct ia64_pal_retval iprv;
+
+ PAL_CALL(iprv, PAL_CACHE_PROT_INFO, cache_level, cache_type, 0);
+
+ if (iprv.status == 0) {
+ prot->pcpi_status = iprv.status;
+ prot->pcp_info[0].pcpi_data = iprv.v0 & 0xffffffff;
+ prot->pcp_info[1].pcpi_data = iprv.v0 >> 32;
+ prot->pcp_info[2].pcpi_data = iprv.v1 & 0xffffffff;
+ prot->pcp_info[3].pcpi_data = iprv.v1 >> 32;
+ prot->pcp_info[4].pcpi_data = iprv.v2 & 0xffffffff;
+ prot->pcp_info[5].pcpi_data = iprv.v2 >> 32;
+ }
+ return iprv.status;
+}
+
+/*
+ * Flush the processor instruction or data caches. *PROGRESS must be
+ * initialized to zero before calling this for the first time..
+ */
+static inline s64
+ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64 *vector)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_IC_OFF(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress);
+ if (vector)
+ *vector = iprv.v0;
+ *progress = iprv.v1;
+ return iprv.status;
+}
+
+
+/* Initialize the processor controlled caches */
+static inline s64
+ia64_pal_cache_init (u64 level, u64 cache_type, u64 rest)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_CACHE_INIT, level, cache_type, rest);
+ return iprv.status;
+}
+
+/* Initialize the tags and data of a data or unified cache line of
+ * processor controlled cache to known values without the availability
+ * of backing memory.
+ */
+static inline s64
+ia64_pal_cache_line_init (u64 physical_addr, u64 data_value)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_CACHE_LINE_INIT, physical_addr, data_value, 0);
+ return iprv.status;
+}
+
+
+/* Read the data and tag of a processor controlled cache line for diags */
+static inline s64
+ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_CACHE_READ, line_id.pclid_data, physical_addr, 0);
+ return iprv.status;
+}
+
+/* Return summary information about the heirarchy of caches controlled by the processor */
+static inline s64
+ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0);
+ if (cache_levels)
+ *cache_levels = iprv.v0;
+ if (unique_caches)
+ *unique_caches = iprv.v1;
+ return iprv.status;
+}
+
+/* Write the data and tag of a processor-controlled cache line for diags */
+static inline s64
+ia64_pal_cache_write (pal_cache_line_id_u_t line_id, u64 physical_addr, u64 data)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_CACHE_WRITE, line_id.pclid_data, physical_addr, data);
+ return iprv.status;
+}
+
+
+/* Return the parameters needed to copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_info (u64 copy_type, u64 num_procs, u64 num_iopics,
+ u64 *buffer_size, u64 *buffer_align)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_COPY_INFO, copy_type, num_procs, num_iopics);
+ if (buffer_size)
+ *buffer_size = iprv.v0;
+ if (buffer_align)
+ *buffer_align = iprv.v1;
+ return iprv.status;
+}
+
+/* Copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc_offset)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_COPY_PAL, target_addr, alloc_size, processor);
+ if (pal_proc_offset)
+ *pal_proc_offset = iprv.v0;
+ return iprv.status;
+}
+
+/* Return the number of instruction and data debug register pairs */
+static inline s64
+ia64_pal_debug_info (u64 *inst_regs, u64 *data_regs)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0);
+ if (inst_regs)
+ *inst_regs = iprv.v0;
+ if (data_regs)
+ *data_regs = iprv.v1;
+
+ return iprv.status;
+}
+
+#ifdef TBD
+/* Switch from IA64-system environment to IA-32 system environment */
+static inline s64
+ia64_pal_enter_ia32_env (ia32_env1, ia32_env2, ia32_env3)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_ENTER_IA_32_ENV, ia32_env1, ia32_env2, ia32_env3);
+ return iprv.status;
+}
+#endif
+
+/* Get unique geographical address of this processor on its bus */
+static inline s64
+ia64_pal_fixed_addr (u64 *global_unique_addr)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_FIXED_ADDR, 0, 0, 0);
+ if (global_unique_addr)
+ *global_unique_addr = iprv.v0;
+ return iprv.status;
+}
+
+/* Get base frequency of the platform if generated by the processor */
+static inline s64
+ia64_pal_freq_base (u64 *platform_base_freq)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0);
+ if (platform_base_freq)
+ *platform_base_freq = iprv.v0;
+ return iprv.status;
+}
+
+/*
+ * Get the ratios for processor frequency, bus frequency and interval timer to
+ * to base frequency of the platform
+ */
+static inline s64
+ia64_pal_freq_ratios (struct pal_freq_ratio *proc_ratio, struct pal_freq_ratio *bus_ratio,
+ struct pal_freq_ratio *itc_ratio)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_FREQ_RATIOS, 0, 0, 0);
+ if (proc_ratio)
+ *(u64 *)proc_ratio = iprv.v0;
+ if (bus_ratio)
+ *(u64 *)bus_ratio = iprv.v1;
+ if (itc_ratio)
+ *(u64 *)itc_ratio = iprv.v2;
+ return iprv.status;
+}
+
+/* Make the processor enter HALT or one of the implementation dependent low
+ * power states where prefetching and execution are suspended and cache and
+ * TLB coherency is not maintained.
+ */
+static inline s64
+ia64_pal_halt (u64 halt_state)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_HALT, halt_state, 0, 0);
+ return iprv.status;
+}
+
+typedef union pal_power_mgmt_info_u {
+ u64 ppmi_data;
+ struct {
+ u64 exit_latency : 16,
+ entry_latency : 16,
+ power_consumption : 28,
+ im : 1,
+ co : 1,
+ reserved : 2;
+ } pal_power_mgmt_info_s;
+} pal_power_mgmt_info_u_t;
+
+/* Return information about processor's optional power management capabilities. */
+static inline s64
+ia64_pal_halt_info (pal_power_mgmt_info_u_t *power_buf)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0, 0);
+ return iprv.status;
+}
+
+/* Cause the processor to enter LIGHT HALT state, where prefetching and execution are
+ * suspended, but cache and TLB coherency is maintained.
+ */
+static inline s64
+ia64_pal_halt_light (void)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_HALT_LIGHT, 0, 0, 0);
+ return iprv.status;
+}
+
+/* Clear all the processor error logging registers and reset the indicator that allows
+ * the error logging registers to be written. This procedure also checks the pending
+ * machine check bit and pending INIT bit and reports their states.
+ */
+static inline s64
+ia64_pal_mc_clear_log (u64 *pending_vector)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MC_CLEAR_LOG, 0, 0, 0);
+ if (pending_vector)
+ *pending_vector = iprv.v0;
+ return iprv.status;
+}
+
+/* Ensure that all outstanding transactions in a processor are completed or that any
+ * MCA due to thes outstanding transaction is taken.
+ */
+static inline s64
+ia64_pal_mc_drain (void)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MC_DRAIN, 0, 0, 0);
+ return iprv.status;
+}
+
+/* Return the machine check dynamic processor state */
+static inline s64
+ia64_pal_mc_dynamic_state (u64 offset, u64 *size, u64 *pds)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, offset, 0, 0);
+ if (size)
+ *size = iprv.v0;
+ if (pds)
+ *pds = iprv.v1;
+ return iprv.status;
+}
+
+/* Return processor machine check information */
+static inline s64
+ia64_pal_mc_error_info (u64 info_index, u64 type_index, u64 *size, u64 *error_info)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MC_ERROR_INFO, info_index, type_index, 0);
+ if (size)
+ *size = iprv.v0;
+ if (error_info)
+ *error_info = iprv.v1;
+ return iprv.status;
+}
+
+/* Inform PALE_CHECK whether a machine check is expected so that PALE_CHECK willnot
+ * attempt to correct any expected machine checks.
+ */
+static inline s64
+ia64_pal_mc_expected (u64 expected, u64 *previous)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MC_EXPECTED, expected, 0, 0);
+ if (previous)
+ *previous = iprv.v0;
+ return iprv.status;
+}
+
+/* Register a platform dependent location with PAL to which it can save
+ * minimal processor state in the event of a machine check or initialization
+ * event.
+ */
+static inline s64
+ia64_pal_mc_register_mem (u64 physical_addr)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, 0, 0);
+ return iprv.status;
+}
+
+/* Restore minimal architectural processor state, set CMC interrupt if necessary
+ * and resume execution
+ */
+static inline s64
+ia64_pal_mc_resume (u64 set_cmci, u64 save_ptr)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MC_RESUME, set_cmci, save_ptr, 0);
+ return iprv.status;
+}
+
+/* Return the memory attributes implemented by the processor */
+static inline s64
+ia64_pal_mem_attrib (u64 *mem_attrib)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MEM_ATTRIB, 0, 0, 0);
+ if (mem_attrib)
+ *mem_attrib = iprv.v0 & 0xff;
+ return iprv.status;
+}
+
+/* Return the amount of memory needed for second phase of processor
+ * self-test and the required alignment of memory.
+ */
+static inline s64
+ia64_pal_mem_for_test (u64 *bytes_needed, u64 *alignment)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MEM_FOR_TEST, 0, 0, 0);
+ if (bytes_needed)
+ *bytes_needed = iprv.v0;
+ if (alignment)
+ *alignment = iprv.v1;
+ return iprv.status;
+}
+
+typedef union pal_perf_mon_info_u {
+ u64 ppmi_data;
+ struct {
+ u64 generic : 8,
+ width : 8,
+ cycles : 8,
+ retired : 8,
+ reserved : 32;
+ } pal_perf_mon_info_s;
+} pal_perf_mon_info_u_t;
+
+/* Return the performance monitor information about what can be counted
+ * and how to configure the monitors to count the desired events.
+ */
+static inline s64
+ia64_pal_perf_mon_info (u64 *pm_buffer, pal_perf_mon_info_u_t *pm_info)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_PERF_MON_INFO, (unsigned long) pm_buffer, 0, 0);
+ if (pm_info)
+ pm_info->ppmi_data = iprv.v0;
+ return iprv.status;
+}
+
+/* Specifies the physical address of the processor interrupt block
+ * and I/O port space.
+ */
+static inline s64
+ia64_pal_platform_addr (u64 type, u64 physical_addr)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_PLATFORM_ADDR, type, physical_addr, 0);
+ return iprv.status;
+}
+
+/* Set the SAL PMI entrypoint in memory */
+static inline s64
+ia64_pal_pmi_entrypoint (u64 sal_pmi_entry_addr)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_PMI_ENTRYPOINT, sal_pmi_entry_addr, 0, 0);
+ return iprv.status;
+}
+
+struct pal_features_s;
+/* Provide information about configurable processor features */
+static inline s64
+ia64_pal_proc_get_features (u64 *features_avail,
+ u64 *features_status,
+ u64 *features_control)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, 0, 0);
+ if (iprv.status == 0) {
+ *features_avail = iprv.v0;
+ *features_status = iprv.v1;
+ *features_control = iprv.v2;
+ }
+ return iprv.status;
+}
+
+/* Enable/disable processor dependent features */
+static inline s64
+ia64_pal_proc_set_features (u64 feature_select)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_PHYS(iprv, PAL_PROC_SET_FEATURES, feature_select, 0, 0);
+ return iprv.status;
+}
+
+/*
+ * Put everything in a struct so we avoid the global offset table whenever
+ * possible.
+ */
+typedef struct ia64_ptce_info_s {
+ u64 base;
+ u32 count[2];
+ u32 stride[2];
+} ia64_ptce_info_t;
+
+/* Return the information required for the architected loop used to purge
+ * (initialize) the entire TC
+ */
+static inline s64
+ia64_get_ptce (ia64_ptce_info_t *ptce)
+{
+ struct ia64_pal_retval iprv;
+
+ if (!ptce)
+ return -1;
+
+ PAL_CALL(iprv, PAL_PTCE_INFO, 0, 0, 0);
+ if (iprv.status == 0) {
+ ptce->base = iprv.v0;
+ ptce->count[0] = iprv.v1 >> 32;
+ ptce->count[1] = iprv.v1 & 0xffffffff;
+ ptce->stride[0] = iprv.v2 >> 32;
+ ptce->stride[1] = iprv.v2 & 0xffffffff;
+ }
+ return iprv.status;
+}
+
+/* Return info about implemented application and control registers. */
+static inline s64
+ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_REGISTER_INFO, info_request, 0, 0);
+ if (reg_info_1)
+ *reg_info_1 = iprv.v0;
+ if (reg_info_2)
+ *reg_info_2 = iprv.v1;
+ return iprv.status;
+}
+
+typedef union pal_hints_u {
+ u64 ph_data;
+ struct {
+ u64 si : 1,
+ li : 1,
+ reserved : 62;
+ } pal_hints_s;
+} pal_hints_u_t;
+
+/* Return information about the register stack and RSE for this processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0);
+ if (num_phys_stacked)
+ *num_phys_stacked = iprv.v0;
+ if (hints)
+ hints->ph_data = iprv.v1;
+ return iprv.status;
+}
+
+/* Cause the processor to enter SHUTDOWN state, where prefetching and execution are
+ * suspended, but cause cache and TLB coherency to be maintained.
+ * This is usually called in IA-32 mode.
+ */
+static inline s64
+ia64_pal_shutdown (void)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_SHUTDOWN, 0, 0, 0);
+ return iprv.status;
+}
+
+/* Perform the second phase of processor self-test. */
+static inline s64
+ia64_pal_test_proc (u64 test_addr, u64 test_size, u64 attributes, u64 *self_test_state)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_TEST_PROC, test_addr, test_size, attributes);
+ if (self_test_state)
+ *self_test_state = iprv.v0;
+ return iprv.status;
+}
+
+typedef union pal_version_u {
+ u64 pal_version_val;
+ struct {
+ u64 pv_pal_b_rev : 8;
+ u64 pv_pal_b_model : 8;
+ u64 pv_reserved1 : 8;
+ u64 pv_pal_vendor : 8;
+ u64 pv_pal_a_rev : 8;
+ u64 pv_pal_a_model : 8;
+ u64 pv_reserved2 : 16;
+ } pal_version_s;
+} pal_version_u_t;
+
+
+/* Return PAL version information */
+static inline s64
+ia64_pal_version (pal_version_u_t *pal_min_version, pal_version_u_t *pal_cur_version)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_PHYS(iprv, PAL_VERSION, 0, 0, 0);
+ if (pal_min_version)
+ pal_min_version->pal_version_val = iprv.v0;
+
+ if (pal_cur_version)
+ pal_cur_version->pal_version_val = iprv.v1;
+
+ return iprv.status;
+}
+
+typedef union pal_tc_info_u {
+ u64 pti_val;
+ struct {
+ u64 num_sets : 8,
+ associativity : 8,
+ num_entries : 16,
+ pf : 1,
+ unified : 1,
+ reduce_tr : 1,
+ reserved : 29;
+ } pal_tc_info_s;
+} pal_tc_info_u_t;
+
+#define tc_reduce_tr pal_tc_info_s.reduce_tr
+#define tc_unified pal_tc_info_s.unified
+#define tc_pf pal_tc_info_s.pf
+#define tc_num_entries pal_tc_info_s.num_entries
+#define tc_associativity pal_tc_info_s.associativity
+#define tc_num_sets pal_tc_info_s.num_sets
+
+
+/* Return information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_info (u64 tc_level, u64 tc_type, pal_tc_info_u_t *tc_info, u64 *tc_pages)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_VM_INFO, tc_level, tc_type, 0);
+ if (tc_info)
+ tc_info->pti_val = iprv.v0;
+ if (tc_pages)
+ *tc_pages = iprv.v1;
+ return iprv.status;
+}
+
+/* Get page size information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0);
+ if (tr_pages)
+ *tr_pages = iprv.v0;
+ if (vw_pages)
+ *vw_pages = iprv.v1;
+ return iprv.status;
+}
+
+typedef union pal_vm_info_1_u {
+ u64 pvi1_val;
+ struct {
+ u64 vw : 1,
+ phys_add_size : 7,
+ key_size : 8,
+ max_pkr : 8,
+ hash_tag_id : 8,
+ max_dtr_entry : 8,
+ max_itr_entry : 8,
+ max_unique_tcs : 8,
+ num_tc_levels : 8;
+ } pal_vm_info_1_s;
+} pal_vm_info_1_u_t;
+
+typedef union pal_vm_info_2_u {
+ u64 pvi2_val;
+ struct {
+ u64 impl_va_msb : 8,
+ rid_size : 8,
+ reserved : 48;
+ } pal_vm_info_2_s;
+} pal_vm_info_2_u_t;
+
+/* Get summary information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_summary (pal_vm_info_1_u_t *vm_info_1, pal_vm_info_2_u_t *vm_info_2)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_VM_SUMMARY, 0, 0, 0);
+ if (vm_info_1)
+ vm_info_1->pvi1_val = iprv.v0;
+ if (vm_info_2)
+ vm_info_2->pvi2_val = iprv.v1;
+ return iprv.status;
+}
+
+typedef union pal_itr_valid_u {
+ u64 piv_val;
+ struct {
+ u64 access_rights_valid : 1,
+ priv_level_valid : 1,
+ dirty_bit_valid : 1,
+ mem_attr_valid : 1,
+ reserved : 60;
+ } pal_tr_valid_s;
+} pal_tr_valid_u_t;
+
+/* Read a translation register */
+static inline s64
+ia64_pal_tr_read (u64 reg_num, u64 tr_type, u64 *tr_buffer, pal_tr_valid_u_t *tr_valid)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
+ if (tr_valid)
+ tr_valid->piv_val = iprv.v0;
+ return iprv.status;
+}
+
+/*
+ * PAL_PREFETCH_VISIBILITY transaction types
+ */
+#define PAL_VISIBILITY_VIRTUAL 0
+#define PAL_VISIBILITY_PHYSICAL 1
+
+/*
+ * PAL_PREFETCH_VISIBILITY return codes
+ */
+#define PAL_VISIBILITY_OK 1
+#define PAL_VISIBILITY_OK_REMOTE_NEEDED 0
+#define PAL_VISIBILITY_INVAL_ARG -2
+#define PAL_VISIBILITY_ERROR -3
+
+static inline s64
+ia64_pal_prefetch_visibility (s64 trans_type)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_PREFETCH_VISIBILITY, trans_type, 0, 0);
+ return iprv.status;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PAL_H */
diff --git a/include/asm-ia64/param.h b/include/asm-ia64/param.h
new file mode 100644
index 0000000..6c6b679
--- /dev/null
+++ b/include/asm-ia64/param.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_PARAM_H
+#define _ASM_IA64_PARAM_H
+
+/*
+ * Fundamental kernel parameters.
+ *
+ * Based on <asm-i386/param.h>.
+ *
+ * Modified 1998, 1999, 2002-2003
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define EXEC_PAGESIZE 65536
+
+#ifndef NOGROUP
+# define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#ifdef __KERNEL__
+# include <linux/config.h> /* mustn't include <linux/config.h> outside of #ifdef __KERNEL__ */
+# ifdef CONFIG_IA64_HP_SIM
+ /*
+ * Yeah, simulating stuff is slow, so let us catch some breath between
+ * timer interrupts...
+ */
+# define HZ 32
+# else
+# define HZ 1024
+# endif
+# define USER_HZ HZ
+# define CLOCKS_PER_SEC HZ /* frequency at which times() counts */
+#else
+ /*
+ * Technically, this is wrong, but some old apps still refer to it. The proper way to
+ * get the HZ value is via sysconf(_SC_CLK_TCK).
+ */
+# define HZ 1024
+#endif
+
+#endif /* _ASM_IA64_PARAM_H */
diff --git a/include/asm-ia64/parport.h b/include/asm-ia64/parport.h
new file mode 100644
index 0000000..67e16ad
--- /dev/null
+++ b/include/asm-ia64/parport.h
@@ -0,0 +1,20 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_IA64_PARPORT_H
+#define _ASM_IA64_PARPORT_H 1
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+
+static int __devinit
+parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+ return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_IA64_PARPORT_H */
diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h
new file mode 100644
index 0000000..4797f35
--- /dev/null
+++ b/include/asm-ia64/patch.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_IA64_PATCH_H
+#define _ASM_IA64_PATCH_H
+
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * There are a number of reasons for patching instructions. Rather than duplicating code
+ * all over the place, we put the common stuff here. Reasons for patching: in-kernel
+ * module-loader, virtual-to-physical patch-list, McKinley Errata 9 workaround, and gate
+ * shared library. Undoubtedly, some of these reasons will disappear and others will
+ * be added over time.
+ */
+#include <linux/elf.h>
+#include <linux/types.h>
+
+extern void ia64_patch (u64 insn_addr, u64 mask, u64 val); /* patch any insn slot */
+extern void ia64_patch_imm64 (u64 insn_addr, u64 val); /* patch "movl" w/abs. value*/
+extern void ia64_patch_imm60 (u64 insn_addr, u64 val); /* patch "brl" w/ip-rel value */
+
+extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
+extern void ia64_patch_vtop (unsigned long start, unsigned long end);
+extern void ia64_patch_gate (void);
+
+#endif /* _ASM_IA64_PATCH_H */
diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h
new file mode 100644
index 0000000..a8314ee
--- /dev/null
+++ b/include/asm-ia64/pci.h
@@ -0,0 +1,141 @@
+#ifndef _ASM_IA64_PCI_H
+#define _ASM_IA64_PCI_H
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/scatterlist.h>
+
+/*
+ * Can be used to override the logic in pci_scan_bus for skipping already-configured bus
+ * numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the
+ * loader.
+ */
+#define pcibios_assign_all_busses() 0
+#define pcibios_scan_all_fns(a, b) 0
+
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0x10000000
+
+void pcibios_config_init(void);
+
+struct pci_dev;
+
+/*
+ * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct correspondence
+ * between device bus addresses and CPU physical addresses. Platforms with a hardware I/O
+ * MMU _must_ turn this off to suppress the bounce buffer handling code in the block and
+ * network device layers. Platforms with separate bus address spaces _must_ turn this off
+ * and provide a device DMA mapping implementation that takes care of the necessary
+ * address translation.
+ *
+ * For now, the ia64 platforms which may have separate/multiple bus address spaces all
+ * have I/O MMUs which support the merging of physically discontiguous buffers, so we can
+ * use that as the sole factor to determine the setting of PCI_DMA_BUS_IS_PHYS.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL)
+
+static inline void
+pcibios_set_master (struct pci_dev *dev)
+{
+ /* No special bus mastering setup handling */
+}
+
+static inline void
+pcibios_penalize_isa_irq (int irq)
+{
+ /* We don't do dynamic PCI IRQ allocation */
+}
+
+#define HAVE_ARCH_PCI_MWI 1
+extern int pcibios_prep_mwi (struct pci_dev *);
+
+#include <asm-generic/pci-dma-compat.h>
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
+ dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
+ __u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME) \
+ ((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
+ (((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME) \
+ ((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
+ (((PTR)->LEN_NAME) = (VAL))
+
+/* The ia64 platform always supports 64-bit addressing. */
+#define pci_dac_dma_supported(pci_dev, mask) (1)
+#define pci_dac_page_to_dma(dev,pg,off,dir) ((dma_addr_t) page_to_bus(pg) + (off))
+#define pci_dac_dma_to_page(dev,dma_addr) (virt_to_page(bus_to_virt(dma_addr)))
+#define pci_dac_dma_to_offset(dev,dma_addr) offset_in_page(dma_addr)
+#define pci_dac_dma_sync_single_for_cpu(dev,dma_addr,len,dir) do { } while (0)
+#define pci_dac_dma_sync_single_for_device(dev,dma_addr,len,dir) do { mb(); } while (0)
+
+#define sg_dma_len(sg) ((sg)->dma_length)
+#define sg_dma_address(sg) ((sg)->dma_address)
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine);
+#define HAVE_PCI_LEGACY
+extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
+ struct vm_area_struct *vma);
+extern ssize_t pci_read_legacy_io(struct kobject *kobj, char *buf, loff_t off,
+ size_t count);
+extern ssize_t pci_write_legacy_io(struct kobject *kobj, char *buf, loff_t off,
+ size_t count);
+extern int pci_mmap_legacy_mem(struct kobject *kobj,
+ struct bin_attribute *attr,
+ struct vm_area_struct *vma);
+
+#define pci_get_legacy_mem platform_pci_get_legacy_mem
+#define pci_legacy_read platform_pci_legacy_read
+#define pci_legacy_write platform_pci_legacy_write
+
+struct pci_window {
+ struct resource resource;
+ u64 offset;
+};
+
+struct pci_controller {
+ void *acpi_handle;
+ void *iommu;
+ int segment;
+
+ unsigned int windows;
+ struct pci_window *window;
+
+ void *platform_data;
+};
+
+#define PCI_CONTROLLER(busdev) ((struct pci_controller *) busdev->sysdata)
+#define pci_domain_nr(busdev) (PCI_CONTROLLER(busdev)->segment)
+
+extern struct pci_ops pci_root_ops;
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ return (pci_domain_nr(bus) != 0);
+}
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+ struct pci_bus_region *region, struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+ struct resource *res, struct pci_bus_region *region);
+
+#define pcibios_scan_all_fns(a, b) 0
+
+#endif /* _ASM_IA64_PCI_H */
diff --git a/include/asm-ia64/percpu.h b/include/asm-ia64/percpu.h
new file mode 100644
index 0000000..1e87f19
--- /dev/null
+++ b/include/asm-ia64/percpu.h
@@ -0,0 +1,72 @@
+#ifndef _ASM_IA64_PERCPU_H
+#define _ASM_IA64_PERCPU_H
+
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE
+
+#ifdef __ASSEMBLY__
+# define THIS_CPU(var) (per_cpu__##var) /* use this to mark accesses to per-CPU variables... */
+#else /* !__ASSEMBLY__ */
+
+#include <linux/config.h>
+
+#include <linux/threads.h>
+
+#ifdef HAVE_MODEL_SMALL_ATTRIBUTE
+# define __SMALL_ADDR_AREA __attribute__((__model__ (__small__)))
+#else
+# define __SMALL_ADDR_AREA
+#endif
+
+#define DECLARE_PER_CPU(type, name) \
+ extern __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
+
+/* Separate out the type, so (int[3], foo) works. */
+#define DEFINE_PER_CPU(type, name) \
+ __attribute__((__section__(".data.percpu"))) \
+ __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
+
+/*
+ * Pretty much a literal copy of asm-generic/percpu.h, except that percpu_modcopy() is an
+ * external routine, to avoid include-hell.
+ */
+#ifdef CONFIG_SMP
+
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
+
+#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]))
+#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
+
+extern void percpu_modcopy(void *pcpudst, const void *src, unsigned long size);
+extern void setup_per_cpu_areas (void);
+extern void *per_cpu_init(void);
+
+#else /* ! SMP */
+
+#define per_cpu(var, cpu) (*((void)cpu, &per_cpu__##var))
+#define __get_cpu_var(var) per_cpu__##var
+#define per_cpu_init() (__phys_per_cpu_start)
+
+#endif /* SMP */
+
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+/*
+ * Be extremely careful when taking the address of this variable! Due to virtual
+ * remapping, it is different from the canonical address returned by __get_cpu_var(var)!
+ * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
+ * more efficient.
+ */
+#define __ia64_per_cpu_var(var) (per_cpu__##var)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PERCPU_H */
diff --git a/include/asm-ia64/perfmon.h b/include/asm-ia64/perfmon.h
new file mode 100644
index 0000000..136c60e
--- /dev/null
+++ b/include/asm-ia64/perfmon.h
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ * Stephane Eranian <eranian@hpl.hp.com>
+ */
+
+#ifndef _ASM_IA64_PERFMON_H
+#define _ASM_IA64_PERFMON_H
+
+/*
+ * perfmon comamnds supported on all CPU models
+ */
+#define PFM_WRITE_PMCS 0x01
+#define PFM_WRITE_PMDS 0x02
+#define PFM_READ_PMDS 0x03
+#define PFM_STOP 0x04
+#define PFM_START 0x05
+#define PFM_ENABLE 0x06 /* obsolete */
+#define PFM_DISABLE 0x07 /* obsolete */
+#define PFM_CREATE_CONTEXT 0x08
+#define PFM_DESTROY_CONTEXT 0x09 /* obsolete use close() */
+#define PFM_RESTART 0x0a
+#define PFM_PROTECT_CONTEXT 0x0b /* obsolete */
+#define PFM_GET_FEATURES 0x0c
+#define PFM_DEBUG 0x0d
+#define PFM_UNPROTECT_CONTEXT 0x0e /* obsolete */
+#define PFM_GET_PMC_RESET_VAL 0x0f
+#define PFM_LOAD_CONTEXT 0x10
+#define PFM_UNLOAD_CONTEXT 0x11
+
+/*
+ * PMU model specific commands (may not be supported on all PMU models)
+ */
+#define PFM_WRITE_IBRS 0x20
+#define PFM_WRITE_DBRS 0x21
+
+/*
+ * context flags
+ */
+#define PFM_FL_NOTIFY_BLOCK 0x01 /* block task on user level notifications */
+#define PFM_FL_SYSTEM_WIDE 0x02 /* create a system wide context */
+#define PFM_FL_OVFL_NO_MSG 0x80 /* do not post overflow/end messages for notification */
+
+/*
+ * event set flags
+ */
+#define PFM_SETFL_EXCL_IDLE 0x01 /* exclude idle task (syswide only) XXX: DO NOT USE YET */
+
+/*
+ * PMC flags
+ */
+#define PFM_REGFL_OVFL_NOTIFY 0x1 /* send notification on overflow */
+#define PFM_REGFL_RANDOM 0x2 /* randomize sampling interval */
+
+/*
+ * PMD/PMC/IBR/DBR return flags (ignored on input)
+ *
+ * Those flags are used on output and must be checked in case EAGAIN is returned
+ * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure.
+ */
+#define PFM_REG_RETFL_NOTAVAIL (1UL<<31) /* set if register is implemented but not available */
+#define PFM_REG_RETFL_EINVAL (1UL<<30) /* set if register entry is invalid */
+#define PFM_REG_RETFL_MASK (PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL)
+
+#define PFM_REG_HAS_ERROR(flag) (((flag) & PFM_REG_RETFL_MASK) != 0)
+
+typedef unsigned char pfm_uuid_t[16]; /* custom sampling buffer identifier type */
+
+/*
+ * Request structure used to define a context
+ */
+typedef struct {
+ pfm_uuid_t ctx_smpl_buf_id; /* which buffer format to use (if needed) */
+ unsigned long ctx_flags; /* noblock/block */
+ unsigned short ctx_nextra_sets; /* number of extra event sets (you always get 1) */
+ unsigned short ctx_reserved1; /* for future use */
+ int ctx_fd; /* return arg: unique identification for context */
+ void *ctx_smpl_vaddr; /* return arg: virtual address of sampling buffer, is used */
+ unsigned long ctx_reserved2[11];/* for future use */
+} pfarg_context_t;
+
+/*
+ * Request structure used to write/read a PMC or PMD
+ */
+typedef struct {
+ unsigned int reg_num; /* which register */
+ unsigned short reg_set; /* event set for this register */
+ unsigned short reg_reserved1; /* for future use */
+
+ unsigned long reg_value; /* initial pmc/pmd value */
+ unsigned long reg_flags; /* input: pmc/pmd flags, return: reg error */
+
+ unsigned long reg_long_reset; /* reset after buffer overflow notification */
+ unsigned long reg_short_reset; /* reset after counter overflow */
+
+ unsigned long reg_reset_pmds[4]; /* which other counters to reset on overflow */
+ unsigned long reg_random_seed; /* seed value when randomization is used */
+ unsigned long reg_random_mask; /* bitmask used to limit random value */
+ unsigned long reg_last_reset_val;/* return: PMD last reset value */
+
+ unsigned long reg_smpl_pmds[4]; /* which pmds are accessed when PMC overflows */
+ unsigned long reg_smpl_eventid; /* opaque sampling event identifier */
+
+ unsigned long reg_reserved2[3]; /* for future use */
+} pfarg_reg_t;
+
+typedef struct {
+ unsigned int dbreg_num; /* which debug register */
+ unsigned short dbreg_set; /* event set for this register */
+ unsigned short dbreg_reserved1; /* for future use */
+ unsigned long dbreg_value; /* value for debug register */
+ unsigned long dbreg_flags; /* return: dbreg error */
+ unsigned long dbreg_reserved2[1]; /* for future use */
+} pfarg_dbreg_t;
+
+typedef struct {
+ unsigned int ft_version; /* perfmon: major [16-31], minor [0-15] */
+ unsigned int ft_reserved; /* reserved for future use */
+ unsigned long reserved[4]; /* for future use */
+} pfarg_features_t;
+
+typedef struct {
+ pid_t load_pid; /* process to load the context into */
+ unsigned short load_set; /* first event set to load */
+ unsigned short load_reserved1; /* for future use */
+ unsigned long load_reserved2[3]; /* for future use */
+} pfarg_load_t;
+
+typedef struct {
+ int msg_type; /* generic message header */
+ int msg_ctx_fd; /* generic message header */
+ unsigned long msg_ovfl_pmds[4]; /* which PMDs overflowed */
+ unsigned short msg_active_set; /* active set at the time of overflow */
+ unsigned short msg_reserved1; /* for future use */
+ unsigned int msg_reserved2; /* for future use */
+ unsigned long msg_tstamp; /* for perf tuning/debug */
+} pfm_ovfl_msg_t;
+
+typedef struct {
+ int msg_type; /* generic message header */
+ int msg_ctx_fd; /* generic message header */
+ unsigned long msg_tstamp; /* for perf tuning */
+} pfm_end_msg_t;
+
+typedef struct {
+ int msg_type; /* type of the message */
+ int msg_ctx_fd; /* unique identifier for the context */
+ unsigned long msg_tstamp; /* for perf tuning */
+} pfm_gen_msg_t;
+
+#define PFM_MSG_OVFL 1 /* an overflow happened */
+#define PFM_MSG_END 2 /* task to which context was attached ended */
+
+typedef union {
+ pfm_ovfl_msg_t pfm_ovfl_msg;
+ pfm_end_msg_t pfm_end_msg;
+ pfm_gen_msg_t pfm_gen_msg;
+} pfm_msg_t;
+
+/*
+ * Define the version numbers for both perfmon as a whole and the sampling buffer format.
+ */
+#define PFM_VERSION_MAJ 2U
+#define PFM_VERSION_MIN 0U
+#define PFM_VERSION (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
+#define PFM_VERSION_MAJOR(x) (((x)>>16) & 0xffff)
+#define PFM_VERSION_MINOR(x) ((x) & 0xffff)
+
+
+/*
+ * miscellaneous architected definitions
+ */
+#define PMU_FIRST_COUNTER 4 /* first counting monitor (PMC/PMD) */
+#define PMU_MAX_PMCS 256 /* maximum architected number of PMC registers */
+#define PMU_MAX_PMDS 256 /* maximum architected number of PMD registers */
+
+#ifdef __KERNEL__
+
+extern long perfmonctl(int fd, int cmd, void *arg, int narg);
+
+extern void pfm_save_regs (struct task_struct *);
+extern void pfm_load_regs (struct task_struct *);
+
+extern void pfm_exit_thread(struct task_struct *);
+extern int pfm_use_debug_registers(struct task_struct *);
+extern int pfm_release_debug_registers(struct task_struct *);
+extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, int is_ctxswin);
+extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs);
+extern void pfm_init_percpu(void);
+extern void pfm_handle_work(void);
+
+/*
+ * Reset PMD register flags
+ */
+#define PFM_PMD_SHORT_RESET 0
+#define PFM_PMD_LONG_RESET 1
+
+typedef union {
+ unsigned int val;
+ struct {
+ unsigned int notify_user:1; /* notify user program of overflow */
+ unsigned int reset_ovfl_pmds:1; /* reset overflowed PMDs */
+ unsigned int block_task:1; /* block monitored task on kernel exit */
+ unsigned int mask_monitoring:1; /* mask monitors via PMCx.plm */
+ unsigned int reserved:28; /* for future use */
+ } bits;
+} pfm_ovfl_ctrl_t;
+
+typedef struct {
+ unsigned char ovfl_pmd; /* index of overflowed PMD */
+ unsigned char ovfl_notify; /* =1 if monitor requested overflow notification */
+ unsigned short active_set; /* event set active at the time of the overflow */
+ pfm_ovfl_ctrl_t ovfl_ctrl; /* return: perfmon controls to set by handler */
+
+ unsigned long pmd_last_reset; /* last reset value of of the PMD */
+ unsigned long smpl_pmds[4]; /* bitmask of other PMD of interest on overflow */
+ unsigned long smpl_pmds_values[PMU_MAX_PMDS]; /* values for the other PMDs of interest */
+ unsigned long pmd_value; /* current 64-bit value of the PMD */
+ unsigned long pmd_eventid; /* eventid associated with PMD */
+} pfm_ovfl_arg_t;
+
+
+typedef struct {
+ char *fmt_name;
+ pfm_uuid_t fmt_uuid;
+ size_t fmt_arg_size;
+ unsigned long fmt_flags;
+
+ int (*fmt_validate)(struct task_struct *task, unsigned int flags, int cpu, void *arg);
+ int (*fmt_getsize)(struct task_struct *task, unsigned int flags, int cpu, void *arg, unsigned long *size);
+ int (*fmt_init)(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *arg);
+ int (*fmt_handler)(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp);
+ int (*fmt_restart)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+ int (*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+ int (*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs);
+
+ struct list_head fmt_list;
+} pfm_buffer_fmt_t;
+
+extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt);
+extern int pfm_unregister_buffer_fmt(pfm_uuid_t uuid);
+
+/*
+ * perfmon interface exported to modules
+ */
+extern int pfm_mod_read_pmds(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_pmcs(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_ibrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_dbrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+
+/*
+ * describe the content of the local_cpu_date->pfm_syst_info field
+ */
+#define PFM_CPUINFO_SYST_WIDE 0x1 /* if set a system wide session exists */
+#define PFM_CPUINFO_DCR_PP 0x2 /* if set the system wide session has started */
+#define PFM_CPUINFO_EXCL_IDLE 0x4 /* the system wide session excludes the idle task */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_PERFMON_H */
diff --git a/include/asm-ia64/perfmon_default_smpl.h b/include/asm-ia64/perfmon_default_smpl.h
new file mode 100644
index 0000000..48822c0
--- /dev/null
+++ b/include/asm-ia64/perfmon_default_smpl.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ * Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * This file implements the default sampling buffer format
+ * for Linux/ia64 perfmon subsystem.
+ */
+#ifndef __PERFMON_DEFAULT_SMPL_H__
+#define __PERFMON_DEFAULT_SMPL_H__ 1
+
+#define PFM_DEFAULT_SMPL_UUID { \
+ 0x4d, 0x72, 0xbe, 0xc0, 0x06, 0x64, 0x41, 0x43, 0x82, 0xb4, 0xd3, 0xfd, 0x27, 0x24, 0x3c, 0x97}
+
+/*
+ * format specific parameters (passed at context creation)
+ */
+typedef struct {
+ unsigned long buf_size; /* size of the buffer in bytes */
+ unsigned int flags; /* buffer specific flags */
+ unsigned int res1; /* for future use */
+ unsigned long reserved[2]; /* for future use */
+} pfm_default_smpl_arg_t;
+
+/*
+ * combined context+format specific structure. Can be passed
+ * to PFM_CONTEXT_CREATE
+ */
+typedef struct {
+ pfarg_context_t ctx_arg;
+ pfm_default_smpl_arg_t buf_arg;
+} pfm_default_smpl_ctx_arg_t;
+
+/*
+ * This header is at the beginning of the sampling buffer returned to the user.
+ * It is directly followed by the first record.
+ */
+typedef struct {
+ unsigned long hdr_count; /* how many valid entries */
+ unsigned long hdr_cur_offs; /* current offset from top of buffer */
+ unsigned long hdr_reserved2; /* reserved for future use */
+
+ unsigned long hdr_overflows; /* how many times the buffer overflowed */
+ unsigned long hdr_buf_size; /* how many bytes in the buffer */
+
+ unsigned int hdr_version; /* contains perfmon version (smpl format diffs) */
+ unsigned int hdr_reserved1; /* for future use */
+ unsigned long hdr_reserved[10]; /* for future use */
+} pfm_default_smpl_hdr_t;
+
+/*
+ * Entry header in the sampling buffer. The header is directly followed
+ * with the values of the PMD registers of interest saved in increasing
+ * index order: PMD4, PMD5, and so on. How many PMDs are present depends
+ * on how the session was programmed.
+ *
+ * In the case where multiple counters overflow at the same time, multiple
+ * entries are written consecutively.
+ *
+ * last_reset_value member indicates the initial value of the overflowed PMD.
+ */
+typedef struct {
+ int pid; /* thread id (for NPTL, this is gettid()) */
+ unsigned char reserved1[3]; /* reserved for future use */
+ unsigned char ovfl_pmd; /* index of overflowed PMD */
+
+ unsigned long last_reset_val; /* initial value of overflowed PMD */
+ unsigned long ip; /* where did the overflow interrupt happened */
+ unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */
+
+ unsigned short cpu; /* cpu on which the overfow occured */
+ unsigned short set; /* event set active when overflow ocurred */
+ int tgid; /* thread group id (for NPTL, this is getpid()) */
+} pfm_default_smpl_entry_t;
+
+#define PFM_DEFAULT_MAX_PMDS 64 /* how many pmds supported by data structures (sizeof(unsigned long) */
+#define PFM_DEFAULT_MAX_ENTRY_SIZE (sizeof(pfm_default_smpl_entry_t)+(sizeof(unsigned long)*PFM_DEFAULT_MAX_PMDS))
+#define PFM_DEFAULT_SMPL_MIN_BUF_SIZE (sizeof(pfm_default_smpl_hdr_t)+PFM_DEFAULT_MAX_ENTRY_SIZE)
+
+#define PFM_DEFAULT_SMPL_VERSION_MAJ 2U
+#define PFM_DEFAULT_SMPL_VERSION_MIN 0U
+#define PFM_DEFAULT_SMPL_VERSION (((PFM_DEFAULT_SMPL_VERSION_MAJ&0xffff)<<16)|(PFM_DEFAULT_SMPL_VERSION_MIN & 0xffff))
+
+#endif /* __PERFMON_DEFAULT_SMPL_H__ */
diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h
new file mode 100644
index 0000000..0f05dc8
--- /dev/null
+++ b/include/asm-ia64/pgalloc.h
@@ -0,0 +1,167 @@
+#ifndef _ASM_IA64_PGALLOC_H
+#define _ASM_IA64_PGALLOC_H
+
+/*
+ * This file contains the functions and defines necessary to allocate
+ * page tables.
+ *
+ * This hopefully works with any (fixed) ia-64 page-size, as defined
+ * in <asm/page.h> (currently 8192).
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2000, Goutham Rao <goutham.rao@intel.com>
+ */
+
+#include <linux/config.h>
+
+#include <linux/compiler.h>
+#include <linux/mm.h>
+#include <linux/page-flags.h>
+#include <linux/threads.h>
+
+#include <asm/mmu_context.h>
+
+/*
+ * Very stupidly, we used to get new pgd's and pmd's, init their contents
+ * to point to the NULL versions of the next level page table, later on
+ * completely re-init them the same way, then free them up. This wasted
+ * a lot of work and caused unnecessary memory traffic. How broken...
+ * We fix this by caching them.
+ */
+#define pgd_quicklist (local_cpu_data->pgd_quick)
+#define pmd_quicklist (local_cpu_data->pmd_quick)
+#define pgtable_cache_size (local_cpu_data->pgtable_cache_sz)
+
+static inline pgd_t*
+pgd_alloc_one_fast (struct mm_struct *mm)
+{
+ unsigned long *ret = NULL;
+
+ preempt_disable();
+
+ ret = pgd_quicklist;
+ if (likely(ret != NULL)) {
+ pgd_quicklist = (unsigned long *)(*ret);
+ ret[0] = 0;
+ --pgtable_cache_size;
+ } else
+ ret = NULL;
+
+ preempt_enable();
+
+ return (pgd_t *) ret;
+}
+
+static inline pgd_t*
+pgd_alloc (struct mm_struct *mm)
+{
+ /* the VM system never calls pgd_alloc_one_fast(), so we do it here. */
+ pgd_t *pgd = pgd_alloc_one_fast(mm);
+
+ if (unlikely(pgd == NULL)) {
+ pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
+ }
+ return pgd;
+}
+
+static inline void
+pgd_free (pgd_t *pgd)
+{
+ preempt_disable();
+ *(unsigned long *)pgd = (unsigned long) pgd_quicklist;
+ pgd_quicklist = (unsigned long *) pgd;
+ ++pgtable_cache_size;
+ preempt_enable();
+}
+
+static inline void
+pud_populate (struct mm_struct *mm, pud_t *pud_entry, pmd_t *pmd)
+{
+ pud_val(*pud_entry) = __pa(pmd);
+}
+
+static inline pmd_t*
+pmd_alloc_one_fast (struct mm_struct *mm, unsigned long addr)
+{
+ unsigned long *ret = NULL;
+
+ preempt_disable();
+
+ ret = (unsigned long *)pmd_quicklist;
+ if (likely(ret != NULL)) {
+ pmd_quicklist = (unsigned long *)(*ret);
+ ret[0] = 0;
+ --pgtable_cache_size;
+ }
+
+ preempt_enable();
+
+ return (pmd_t *)ret;
+}
+
+static inline pmd_t*
+pmd_alloc_one (struct mm_struct *mm, unsigned long addr)
+{
+ pmd_t *pmd = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+
+ return pmd;
+}
+
+static inline void
+pmd_free (pmd_t *pmd)
+{
+ preempt_disable();
+ *(unsigned long *)pmd = (unsigned long) pmd_quicklist;
+ pmd_quicklist = (unsigned long *) pmd;
+ ++pgtable_cache_size;
+ preempt_enable();
+}
+
+#define __pmd_free_tlb(tlb, pmd) pmd_free(pmd)
+
+static inline void
+pmd_populate (struct mm_struct *mm, pmd_t *pmd_entry, struct page *pte)
+{
+ pmd_val(*pmd_entry) = page_to_phys(pte);
+}
+
+static inline void
+pmd_populate_kernel (struct mm_struct *mm, pmd_t *pmd_entry, pte_t *pte)
+{
+ pmd_val(*pmd_entry) = __pa(pte);
+}
+
+static inline struct page *
+pte_alloc_one (struct mm_struct *mm, unsigned long addr)
+{
+ struct page *pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+
+ return pte;
+}
+
+static inline pte_t *
+pte_alloc_one_kernel (struct mm_struct *mm, unsigned long addr)
+{
+ pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+
+ return pte;
+}
+
+static inline void
+pte_free (struct page *pte)
+{
+ __free_page(pte);
+}
+
+static inline void
+pte_free_kernel (pte_t *pte)
+{
+ free_page((unsigned long) pte);
+}
+
+#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+
+extern void check_pgt_cache (void);
+
+#endif /* _ASM_IA64_PGALLOC_H */
diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
new file mode 100644
index 0000000..1757a81
--- /dev/null
+++ b/include/asm-ia64/pgtable.h
@@ -0,0 +1,593 @@
+#ifndef _ASM_IA64_PGTABLE_H
+#define _ASM_IA64_PGTABLE_H
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the IA-64 page table tree.
+ *
+ * This hopefully works with any (fixed) IA-64 page-size, as defined
+ * in <asm/page.h>.
+ *
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/mman.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/types.h>
+
+#define IA64_MAX_PHYS_BITS 50 /* max. number of physical address bits (architected) */
+
+/*
+ * First, define the various bits in a PTE. Note that the PTE format
+ * matches the VHPT short format, the firt doubleword of the VHPD long
+ * format, and the first doubleword of the TLB insertion format.
+ */
+#define _PAGE_P_BIT 0
+#define _PAGE_A_BIT 5
+#define _PAGE_D_BIT 6
+
+#define _PAGE_P (1 << _PAGE_P_BIT) /* page present bit */
+#define _PAGE_MA_WB (0x0 << 2) /* write back memory attribute */
+#define _PAGE_MA_UC (0x4 << 2) /* uncacheable memory attribute */
+#define _PAGE_MA_UCE (0x5 << 2) /* UC exported attribute */
+#define _PAGE_MA_WC (0x6 << 2) /* write coalescing memory attribute */
+#define _PAGE_MA_NAT (0x7 << 2) /* not-a-thing attribute */
+#define _PAGE_MA_MASK (0x7 << 2)
+#define _PAGE_PL_0 (0 << 7) /* privilege level 0 (kernel) */
+#define _PAGE_PL_1 (1 << 7) /* privilege level 1 (unused) */
+#define _PAGE_PL_2 (2 << 7) /* privilege level 2 (unused) */
+#define _PAGE_PL_3 (3 << 7) /* privilege level 3 (user) */
+#define _PAGE_PL_MASK (3 << 7)
+#define _PAGE_AR_R (0 << 9) /* read only */
+#define _PAGE_AR_RX (1 << 9) /* read & execute */
+#define _PAGE_AR_RW (2 << 9) /* read & write */
+#define _PAGE_AR_RWX (3 << 9) /* read, write & execute */
+#define _PAGE_AR_R_RW (4 << 9) /* read / read & write */
+#define _PAGE_AR_RX_RWX (5 << 9) /* read & exec / read, write & exec */
+#define _PAGE_AR_RWX_RW (6 << 9) /* read, write & exec / read & write */
+#define _PAGE_AR_X_RX (7 << 9) /* exec & promote / read & exec */
+#define _PAGE_AR_MASK (7 << 9)
+#define _PAGE_AR_SHIFT 9
+#define _PAGE_A (1 << _PAGE_A_BIT) /* page accessed bit */
+#define _PAGE_D (1 << _PAGE_D_BIT) /* page dirty bit */
+#define _PAGE_PPN_MASK (((__IA64_UL(1) << IA64_MAX_PHYS_BITS) - 1) & ~0xfffUL)
+#define _PAGE_ED (__IA64_UL(1) << 52) /* exception deferral */
+#define _PAGE_PROTNONE (__IA64_UL(1) << 63)
+
+/* Valid only for a PTE with the present bit cleared: */
+#define _PAGE_FILE (1 << 1) /* see swap & file pte remarks below */
+
+#define _PFN_MASK _PAGE_PPN_MASK
+/* Mask of bits which may be changed by pte_modify(); the odd bits are there for _PAGE_PROTNONE */
+#define _PAGE_CHG_MASK (_PAGE_P | _PAGE_PROTNONE | _PAGE_PL_MASK | _PAGE_AR_MASK | _PAGE_ED)
+
+#define _PAGE_SIZE_4K 12
+#define _PAGE_SIZE_8K 13
+#define _PAGE_SIZE_16K 14
+#define _PAGE_SIZE_64K 16
+#define _PAGE_SIZE_256K 18
+#define _PAGE_SIZE_1M 20
+#define _PAGE_SIZE_4M 22
+#define _PAGE_SIZE_16M 24
+#define _PAGE_SIZE_64M 26
+#define _PAGE_SIZE_256M 28
+#define _PAGE_SIZE_1G 30
+#define _PAGE_SIZE_4G 32
+
+#define __ACCESS_BITS _PAGE_ED | _PAGE_A | _PAGE_P | _PAGE_MA_WB
+#define __DIRTY_BITS_NO_ED _PAGE_A | _PAGE_P | _PAGE_D | _PAGE_MA_WB
+#define __DIRTY_BITS _PAGE_ED | __DIRTY_BITS_NO_ED
+
+/*
+ * Definitions for first level:
+ *
+ * PGDIR_SHIFT determines what a first-level page table entry can map.
+ */
+#define PGDIR_SHIFT (PAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define PGDIR_SIZE (__IA64_UL(1) << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD (1UL << (PAGE_SHIFT-3))
+#define USER_PTRS_PER_PGD (5*PTRS_PER_PGD/8) /* regions 0-4 are user regions */
+#define FIRST_USER_PGD_NR 0
+
+/*
+ * Definitions for second level:
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table
+ * can map.
+ */
+#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+#define PTRS_PER_PMD (1UL << (PAGE_SHIFT-3))
+
+/*
+ * Definitions for third level:
+ */
+#define PTRS_PER_PTE (__IA64_UL(1) << (PAGE_SHIFT-3))
+
+/*
+ * All the normal masks have the "page accessed" bits on, as any time
+ * they are used, the page is accessed. They are cleared only by the
+ * page-out routines.
+ */
+#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_A)
+#define PAGE_SHARED __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RW)
+#define PAGE_READONLY __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY_EXEC __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define PAGE_GATE __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX)
+#define PAGE_KERNEL __pgprot(__DIRTY_BITS | _PAGE_PL_0 | _PAGE_AR_RWX)
+#define PAGE_KERNELRX __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX)
+
+# ifndef __ASSEMBLY__
+
+#include <asm/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+#include <asm/processor.h>
+
+/*
+ * Next come the mappings that determine how mmap() protection bits
+ * (PROT_EXEC, PROT_READ, PROT_WRITE, PROT_NONE) get implemented. The
+ * _P version gets used for a private shared memory segment, the _S
+ * version gets used for a shared memory segment with MAP_SHARED on.
+ * In a private shared memory segment, we do a copy-on-write if a task
+ * attempts to write to the page.
+ */
+ /* xwr */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY
+#define __P010 PAGE_READONLY /* write to priv pg -> copy & make writable */
+#define __P011 PAGE_READONLY /* ditto */
+#define __P100 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __P101 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __P110 PAGE_COPY_EXEC
+#define __P111 PAGE_COPY_EXEC
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY
+#define __S010 PAGE_SHARED /* we don't have (and don't need) write-only */
+#define __S011 PAGE_SHARED
+#define __S100 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __S101 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __S110 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+#define __S111 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+
+#define pgd_ERROR(e) printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+#define pmd_ERROR(e) printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pte_ERROR(e) printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+
+
+/*
+ * Some definitions to translate between mem_map, PTEs, and page addresses:
+ */
+
+
+/* Quick test to see if ADDR is a (potentially) valid physical address. */
+static inline long
+ia64_phys_addr_valid (unsigned long addr)
+{
+ return (addr & (local_cpu_data->unimpl_pa_mask)) == 0;
+}
+
+/*
+ * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
+ * memory. For the return value to be meaningful, ADDR must be >=
+ * PAGE_OFFSET. This operation can be relatively expensive (e.g.,
+ * require a hash-, or multi-level tree-lookup or something of that
+ * sort) but it guarantees to return TRUE only if accessing the page
+ * at that address does not cause an error. Note that there may be
+ * addresses for which kern_addr_valid() returns FALSE even though an
+ * access would not cause an error (e.g., this is typically true for
+ * memory mapped I/O regions.
+ *
+ * XXX Need to implement this for IA-64.
+ */
+#define kern_addr_valid(addr) (1)
+
+
+/*
+ * Now come the defines and routines to manage and access the three-level
+ * page table.
+ */
+
+/*
+ * On some architectures, special things need to be done when setting
+ * the PTE in a page table. Nothing special needs to be on IA-64.
+ */
+#define set_pte(ptep, pteval) (*(ptep) = (pteval))
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+#define RGN_SIZE (1UL << 61)
+#define RGN_KERNEL 7
+
+#define VMALLOC_START 0xa000000200000000UL
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define VMALLOC_END_INIT (0xa000000000000000UL + (1UL << (4*PAGE_SHIFT - 9)))
+# define VMALLOC_END vmalloc_end
+ extern unsigned long vmalloc_end;
+#else
+# define VMALLOC_END (0xa000000000000000UL + (1UL << (4*PAGE_SHIFT - 9)))
+#endif
+
+/* fs/proc/kcore.c */
+#define kc_vaddr_to_offset(v) ((v) - 0xa000000000000000UL)
+#define kc_offset_to_vaddr(o) ((o) + 0xa000000000000000UL)
+
+/*
+ * Conversion functions: convert page frame number (pfn) and a protection value to a page
+ * table entry (pte).
+ */
+#define pfn_pte(pfn, pgprot) \
+({ pte_t __pte; pte_val(__pte) = ((pfn) << PAGE_SHIFT) | pgprot_val(pgprot); __pte; })
+
+/* Extract pfn from pte. */
+#define pte_pfn(_pte) ((pte_val(_pte) & _PFN_MASK) >> PAGE_SHIFT)
+
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; })
+
+#define pte_modify(_pte, newprot) \
+ (__pte((pte_val(_pte) & ~_PAGE_CHG_MASK) | (pgprot_val(newprot) & _PAGE_CHG_MASK)))
+
+#define page_pte_prot(page,prot) mk_pte(page, prot)
+#define page_pte(page) page_pte_prot(page, __pgprot(0))
+
+#define pte_none(pte) (!pte_val(pte))
+#define pte_present(pte) (pte_val(pte) & (_PAGE_P | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,pte) (pte_val(*(pte)) = 0UL)
+/* pte_page() returns the "struct page *" corresponding to the PTE: */
+#define pte_page(pte) virt_to_page(((pte_val(pte) & _PFN_MASK) + PAGE_OFFSET))
+
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_bad(pmd) (!ia64_phys_addr_valid(pmd_val(pmd)))
+#define pmd_present(pmd) (pmd_val(pmd) != 0UL)
+#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0UL)
+#define pmd_page_kernel(pmd) ((unsigned long) __va(pmd_val(pmd) & _PFN_MASK))
+#define pmd_page(pmd) virt_to_page((pmd_val(pmd) + PAGE_OFFSET))
+
+#define pud_none(pud) (!pud_val(pud))
+#define pud_bad(pud) (!ia64_phys_addr_valid(pud_val(pud)))
+#define pud_present(pud) (pud_val(pud) != 0UL)
+#define pud_clear(pudp) (pud_val(*(pudp)) = 0UL)
+
+#define pud_page(pud) ((unsigned long) __va(pud_val(pud) & _PFN_MASK))
+
+/*
+ * The following have defined behavior only work if pte_present() is true.
+ */
+#define pte_user(pte) ((pte_val(pte) & _PAGE_PL_MASK) == _PAGE_PL_3)
+#define pte_read(pte) (((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) < 6)
+#define pte_write(pte) ((unsigned) (((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) - 2) <= 4)
+#define pte_exec(pte) ((pte_val(pte) & _PAGE_AR_RX) != 0)
+#define pte_dirty(pte) ((pte_val(pte) & _PAGE_D) != 0)
+#define pte_young(pte) ((pte_val(pte) & _PAGE_A) != 0)
+#define pte_file(pte) ((pte_val(pte) & _PAGE_FILE) != 0)
+/*
+ * Note: we convert AR_RWX to AR_RX and AR_RW to AR_R by clearing the 2nd bit in the
+ * access rights:
+ */
+#define pte_wrprotect(pte) (__pte(pte_val(pte) & ~_PAGE_AR_RW))
+#define pte_mkwrite(pte) (__pte(pte_val(pte) | _PAGE_AR_RW))
+#define pte_mkexec(pte) (__pte(pte_val(pte) | _PAGE_AR_RX))
+#define pte_mkold(pte) (__pte(pte_val(pte) & ~_PAGE_A))
+#define pte_mkyoung(pte) (__pte(pte_val(pte) | _PAGE_A))
+#define pte_mkclean(pte) (__pte(pte_val(pte) & ~_PAGE_D))
+#define pte_mkdirty(pte) (__pte(pte_val(pte) | _PAGE_D))
+
+/*
+ * Macro to a page protection value as "uncacheable". Note that "protection" is really a
+ * misnomer here as the protection value contains the memory attribute bits, dirty bits,
+ * and various other bits as well.
+ */
+#define pgprot_noncached(prot) __pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_UC)
+
+/*
+ * Macro to make mark a page protection value as "write-combining".
+ * Note that "protection" is really a misnomer here as the protection
+ * value contains the memory attribute bits, dirty bits, and various
+ * other bits as well. Accesses through a write-combining translation
+ * works bypasses the caches, but does allow for consecutive writes to
+ * be combined into single (but larger) write transactions.
+ */
+#define pgprot_writecombine(prot) __pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WC)
+
+static inline unsigned long
+pgd_index (unsigned long address)
+{
+ unsigned long region = address >> 61;
+ unsigned long l1index = (address >> PGDIR_SHIFT) & ((PTRS_PER_PGD >> 3) - 1);
+
+ return (region << (PAGE_SHIFT - 6)) | l1index;
+}
+
+/* The offset in the 1-level directory is given by the 3 region bits
+ (61..63) and the level-1 bits. */
+static inline pgd_t*
+pgd_offset (struct mm_struct *mm, unsigned long address)
+{
+ return mm->pgd + pgd_index(address);
+}
+
+/* In the kernel's mapped region we completely ignore the region number
+ (since we know it's in region number 5). */
+#define pgd_offset_k(addr) \
+ (init_mm.pgd + (((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)))
+
+/* Look up a pgd entry in the gate area. On IA-64, the gate-area
+ resides in the kernel-mapped segment, hence we use pgd_offset_k()
+ here. */
+#define pgd_offset_gate(mm, addr) pgd_offset_k(addr)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir,addr) \
+ ((pmd_t *) pud_page(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+/*
+ * Find an entry in the third-level page table. This looks more complicated than it
+ * should be because some platforms place page tables in high memory.
+ */
+#define pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir,addr) ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr)
+#define pte_offset_map_nested(dir,addr) pte_offset_map(dir, addr)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+/* atomic versions of the some PTE manipulations: */
+
+static inline int
+ptep_test_and_clear_young (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+ if (!pte_young(*ptep))
+ return 0;
+ return test_and_clear_bit(_PAGE_A_BIT, ptep);
+#else
+ pte_t pte = *ptep;
+ if (!pte_young(pte))
+ return 0;
+ set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
+ return 1;
+#endif
+}
+
+static inline int
+ptep_test_and_clear_dirty (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+ if (!pte_dirty(*ptep))
+ return 0;
+ return test_and_clear_bit(_PAGE_D_BIT, ptep);
+#else
+ pte_t pte = *ptep;
+ if (!pte_dirty(pte))
+ return 0;
+ set_pte_at(vma->vm_mm, addr, ptep, pte_mkclean(pte));
+ return 1;
+#endif
+}
+
+static inline pte_t
+ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+ return __pte(xchg((long *) ptep, 0));
+#else
+ pte_t pte = *ptep;
+ pte_clear(mm, addr, ptep);
+ return pte;
+#endif
+}
+
+static inline void
+ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+ unsigned long new, old;
+
+ do {
+ old = pte_val(*ptep);
+ new = pte_val(pte_wrprotect(__pte (old)));
+ } while (cmpxchg((unsigned long *) ptep, old, new) != old);
+#else
+ pte_t old_pte = *ptep;
+ set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+#endif
+}
+
+static inline int
+pte_same (pte_t a, pte_t b)
+{
+ return pte_val(a) == pte_val(b);
+}
+
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init (void);
+
+/*
+ * Note: The macros below rely on the fact that MAX_SWAPFILES_SHIFT <= number of
+ * bits in the swap-type field of the swap pte. It would be nice to
+ * enforce that, but we can't easily include <linux/swap.h> here.
+ * (Of course, better still would be to define MAX_SWAPFILES_SHIFT here...).
+ *
+ * Format of swap pte:
+ * bit 0 : present bit (must be zero)
+ * bit 1 : _PAGE_FILE (must be zero)
+ * bits 2- 8: swap-type
+ * bits 9-62: swap offset
+ * bit 63 : _PAGE_PROTNONE bit
+ *
+ * Format of file pte:
+ * bit 0 : present bit (must be zero)
+ * bit 1 : _PAGE_FILE (must be one)
+ * bits 2-62: file_offset/PAGE_SIZE
+ * bit 63 : _PAGE_PROTNONE bit
+ */
+#define __swp_type(entry) (((entry).val >> 2) & 0x7f)
+#define __swp_offset(entry) (((entry).val << 1) >> 10)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((long) (offset) << 9) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+#define PTE_FILE_MAX_BITS 61
+#define pte_to_pgoff(pte) ((pte_val(pte) << 1) >> 3)
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 2) | _PAGE_FILE })
+
+/* XXX is this right? */
+#define io_remap_page_range(vma, vaddr, paddr, size, prot) \
+ remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn) (pfn)
+#define GET_IOSPACE(pfn) 0
+#define GET_PFN(pfn) (pfn)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+extern struct page *zero_page_memmap_ptr;
+#define ZERO_PAGE(vaddr) (zero_page_memmap_ptr)
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HUGETLB_PGDIR_SHIFT (HPAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define HUGETLB_PGDIR_SIZE (__IA64_UL(1) << HUGETLB_PGDIR_SHIFT)
+#define HUGETLB_PGDIR_MASK (~(HUGETLB_PGDIR_SIZE-1))
+struct mmu_gather;
+extern void hugetlb_free_pgtables(struct mmu_gather *tlb,
+ struct vm_area_struct * prev, unsigned long start, unsigned long end);
+#endif
+
+/*
+ * IA-64 doesn't have any external MMU info: the page tables contain all the necessary
+ * information. However, we use this routine to take care of any (delayed) i-cache
+ * flushing that may be necessary.
+ */
+extern void lazy_mmu_prot_update (pte_t pte);
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+/*
+ * Update PTEP with ENTRY, which is guaranteed to be a less
+ * restrictive PTE. That is, ENTRY may have the ACCESSED, DIRTY, and
+ * WRITABLE bits turned on, when the value at PTEP did not. The
+ * WRITABLE bit may only be turned if SAFELY_WRITABLE is TRUE.
+ *
+ * SAFELY_WRITABLE is TRUE if we can update the value at PTEP without
+ * having to worry about races. On SMP machines, there are only two
+ * cases where this is true:
+ *
+ * (1) *PTEP has the PRESENT bit turned OFF
+ * (2) ENTRY has the DIRTY bit turned ON
+ *
+ * On ia64, we could implement this routine with a cmpxchg()-loop
+ * which ORs in the _PAGE_A/_PAGE_D bit if they're set in ENTRY.
+ * However, like on x86, we can get a more streamlined version by
+ * observing that it is OK to drop ACCESSED bit updates when
+ * SAFELY_WRITABLE is FALSE. Besides being rare, all that would do is
+ * result in an extra Access-bit fault, which would then turn on the
+ * ACCESSED bit in the low-level fault handler (iaccess_bit or
+ * daccess_bit in ivt.S).
+ */
+#ifdef CONFIG_SMP
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \
+do { \
+ if (__safely_writable) { \
+ set_pte(__ptep, __entry); \
+ flush_tlb_page(__vma, __addr); \
+ } \
+} while (0)
+#else
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \
+ ptep_establish(__vma, __addr, __ptep, __entry)
+#endif
+
+# ifdef CONFIG_VIRTUAL_MEM_MAP
+ /* arch mem_map init routine is needed due to holes in a virtual mem_map */
+# define __HAVE_ARCH_MEMMAP_INIT
+ extern void memmap_init (unsigned long size, int nid, unsigned long zone,
+ unsigned long start_pfn);
+# endif /* CONFIG_VIRTUAL_MEM_MAP */
+# endif /* !__ASSEMBLY__ */
+
+/*
+ * Identity-mapped regions use a large page size. We'll call such large pages
+ * "granules". If you can think of a better name that's unambiguous, let me
+ * know...
+ */
+#if defined(CONFIG_IA64_GRANULE_64MB)
+# define IA64_GRANULE_SHIFT _PAGE_SIZE_64M
+#elif defined(CONFIG_IA64_GRANULE_16MB)
+# define IA64_GRANULE_SHIFT _PAGE_SIZE_16M
+#endif
+#define IA64_GRANULE_SIZE (1 << IA64_GRANULE_SHIFT)
+/*
+ * log2() of the page size we use to map the kernel image (IA64_TR_KERNEL):
+ */
+#define KERNEL_TR_PAGE_SHIFT _PAGE_SIZE_64M
+#define KERNEL_TR_PAGE_SIZE (1 << KERNEL_TR_PAGE_SHIFT)
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+/* These tell get_user_pages() that the first gate page is accessible from user-level. */
+#define FIXADDR_USER_START GATE_ADDR
+#define FIXADDR_USER_END (GATE_ADDR + 2*PERCPU_PAGE_SIZE)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#define __HAVE_ARCH_PGD_OFFSET_GATE
+#define __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
+
+/*
+ * Override for pgd_addr_end() to deal with the virtual address space holes
+ * in each region. In regions 0..4 virtual address bits are used like this:
+ * +--------+------+--------+-----+-----+--------+
+ * | pgdhi3 | rsvd | pgdlow | pmd | pte | offset |
+ * +--------+------+--------+-----+-----+--------+
+ * 'pgdlow' overflows to pgdhi3 (a.k.a. region bits) leaving rsvd==0
+ */
+#define IA64_PGD_OVERFLOW (PGDIR_SIZE << (PAGE_SHIFT-6))
+
+#define pgd_addr_end(addr, end) \
+({ unsigned long __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK; \
+ if (REGION_NUMBER(__boundary) < 5 && \
+ __boundary & IA64_PGD_OVERFLOW) \
+ __boundary += (RGN_SIZE - 1) & ~(IA64_PGD_OVERFLOW - 1);\
+ (__boundary - 1 < (end) - 1)? __boundary: (end); \
+})
+
+#define pmd_addr_end(addr, end) \
+({ unsigned long __boundary = ((addr) + PMD_SIZE) & PMD_MASK; \
+ if (REGION_NUMBER(__boundary) < 5 && \
+ __boundary & IA64_PGD_OVERFLOW) \
+ __boundary += (RGN_SIZE - 1) & ~(IA64_PGD_OVERFLOW - 1);\
+ (__boundary - 1 < (end) - 1)? __boundary: (end); \
+})
+
+#include <asm-generic/pgtable-nopud.h>
+#include <asm-generic/pgtable.h>
+
+#endif /* _ASM_IA64_PGTABLE_H */
diff --git a/include/asm-ia64/poll.h b/include/asm-ia64/poll.h
new file mode 100644
index 0000000..160258a
--- /dev/null
+++ b/include/asm-ia64/poll.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_IA64_POLL_H
+#define _ASM_IA64_POLL_H
+
+/*
+ * poll(2) bit definitions. Based on <asm-i386/poll.h>.
+ *
+ * Modified 1998, 1999, 2002
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define POLLIN 0x0001
+#define POLLPRI 0x0002
+#define POLLOUT 0x0004
+#define POLLERR 0x0008
+#define POLLHUP 0x0010
+#define POLLNVAL 0x0020
+
+#define POLLRDNORM 0x0040
+#define POLLRDBAND 0x0080
+#define POLLWRNORM 0x0100
+#define POLLWRBAND 0x0200
+#define POLLMSG 0x0400
+#define POLLREMOVE 0x1000
+
+struct pollfd {
+ int fd;
+ short events;
+ short revents;
+};
+
+#endif /* _ASM_IA64_POLL_H */
diff --git a/include/asm-ia64/posix_types.h b/include/asm-ia64/posix_types.h
new file mode 100644
index 0000000..adb6227
--- /dev/null
+++ b/include/asm-ia64/posix_types.h
@@ -0,0 +1,126 @@
+#ifndef _ASM_IA64_POSIX_TYPES_H
+#define _ASM_IA64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ *
+ * Based on <asm-alpha/posix_types.h>.
+ *
+ * Modified 1998-2000, 2003
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned int __kernel_mode_t;
+typedef unsigned int __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef long long __kernel_loff_t;
+typedef int __kernel_pid_t;
+typedef int __kernel_ipc_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned long __kernel_sigset_t; /* at least 32 bits */
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+
+typedef struct {
+ int val[2];
+} __kernel_fsid_t;
+
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned int __kernel_old_dev_t;
+
+# ifdef __KERNEL__
+
+# ifndef __GNUC__
+
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define __FD_ZERO(set) \
+ ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+# else /* !__GNUC__ */
+
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+ unsigned long *tmp = p->fds_bits;
+ int i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 16:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+ tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+ tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+ return;
+
+ case 8:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+ return;
+
+ case 4:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ return;
+ }
+ }
+ i = __FDSET_LONGS;
+ while (i) {
+ i--;
+ *tmp = 0;
+ tmp++;
+ }
+}
+
+# endif /* !__GNUC__ */
+# endif /* __KERNEL__ */
+#endif /* _ASM_IA64_POSIX_TYPES_H */
diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h
new file mode 100644
index 0000000..8769dd9
--- /dev/null
+++ b/include/asm-ia64/processor.h
@@ -0,0 +1,698 @@
+#ifndef _ASM_IA64_PROCESSOR_H
+#define _ASM_IA64_PROCESSOR_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ *
+ * 11/24/98 S.Eranian added ia64_set_iva()
+ * 12/03/99 D. Mosberger implement thread_saved_pc() via kernel unwind API
+ * 06/16/00 A. Mallick added csd/ssd/tssd for ia32 support
+ */
+
+#include <linux/config.h>
+
+#include <asm/intrinsics.h>
+#include <asm/kregs.h>
+#include <asm/ptrace.h>
+#include <asm/ustack.h>
+
+/* Our arch specific arch_init_sched_domain is in arch/ia64/kernel/domain.c */
+#define ARCH_HAS_SCHED_DOMAIN
+
+#define IA64_NUM_DBG_REGS 8
+/*
+ * Limits for PMC and PMD are set to less than maximum architected values
+ * but should be sufficient for a while
+ */
+#define IA64_NUM_PMC_REGS 32
+#define IA64_NUM_PMD_REGS 32
+
+#define DEFAULT_MAP_BASE __IA64_UL_CONST(0x2000000000000000)
+#define DEFAULT_TASK_SIZE __IA64_UL_CONST(0xa000000000000000)
+
+/*
+ * TASK_SIZE really is a mis-named. It really is the maximum user
+ * space address (plus one). On IA-64, there are five regions of 2TB
+ * each (assuming 8KB page size), for a total of 8TB of user virtual
+ * address space.
+ */
+#define TASK_SIZE (current->thread.task_size)
+
+/*
+ * MM_VM_SIZE(mm) gives the maximum address (plus 1) which may contain a mapping for
+ * address-space MM. Note that with 32-bit tasks, this is still DEFAULT_TASK_SIZE,
+ * because the kernel may have installed helper-mappings above TASK_SIZE. For example,
+ * for x86 emulation, the LDT and GDT are mapped above TASK_SIZE.
+ */
+#define MM_VM_SIZE(mm) DEFAULT_TASK_SIZE
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE (current->thread.map_base)
+
+#define IA64_THREAD_FPH_VALID (__IA64_UL(1) << 0) /* floating-point high state valid? */
+#define IA64_THREAD_DBG_VALID (__IA64_UL(1) << 1) /* debug registers valid? */
+#define IA64_THREAD_PM_VALID (__IA64_UL(1) << 2) /* performance registers valid? */
+#define IA64_THREAD_UAC_NOPRINT (__IA64_UL(1) << 3) /* don't log unaligned accesses */
+#define IA64_THREAD_UAC_SIGBUS (__IA64_UL(1) << 4) /* generate SIGBUS on unaligned acc. */
+ /* bit 5 is currently unused */
+#define IA64_THREAD_FPEMU_NOPRINT (__IA64_UL(1) << 6) /* don't log any fpswa faults */
+#define IA64_THREAD_FPEMU_SIGFPE (__IA64_UL(1) << 7) /* send a SIGFPE for fpswa faults */
+
+#define IA64_THREAD_UAC_SHIFT 3
+#define IA64_THREAD_UAC_MASK (IA64_THREAD_UAC_NOPRINT | IA64_THREAD_UAC_SIGBUS)
+#define IA64_THREAD_FPEMU_SHIFT 6
+#define IA64_THREAD_FPEMU_MASK (IA64_THREAD_FPEMU_NOPRINT | IA64_THREAD_FPEMU_SIGFPE)
+
+
+/*
+ * This shift should be large enough to be able to represent 1000000000/itc_freq with good
+ * accuracy while being small enough to fit 10*1000000000<<IA64_NSEC_PER_CYC_SHIFT in 64 bits
+ * (this will give enough slack to represent 10 seconds worth of time as a scaled number).
+ */
+#define IA64_NSEC_PER_CYC_SHIFT 30
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cache.h>
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <linux/types.h>
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+#include <asm/percpu.h>
+#include <asm/rse.h>
+#include <asm/unwind.h>
+#include <asm/atomic.h>
+#ifdef CONFIG_NUMA
+#include <asm/nodedata.h>
+#endif
+
+/* like above but expressed as bitfields for more efficient access: */
+struct ia64_psr {
+ __u64 reserved0 : 1;
+ __u64 be : 1;
+ __u64 up : 1;
+ __u64 ac : 1;
+ __u64 mfl : 1;
+ __u64 mfh : 1;
+ __u64 reserved1 : 7;
+ __u64 ic : 1;
+ __u64 i : 1;
+ __u64 pk : 1;
+ __u64 reserved2 : 1;
+ __u64 dt : 1;
+ __u64 dfl : 1;
+ __u64 dfh : 1;
+ __u64 sp : 1;
+ __u64 pp : 1;
+ __u64 di : 1;
+ __u64 si : 1;
+ __u64 db : 1;
+ __u64 lp : 1;
+ __u64 tb : 1;
+ __u64 rt : 1;
+ __u64 reserved3 : 4;
+ __u64 cpl : 2;
+ __u64 is : 1;
+ __u64 mc : 1;
+ __u64 it : 1;
+ __u64 id : 1;
+ __u64 da : 1;
+ __u64 dd : 1;
+ __u64 ss : 1;
+ __u64 ri : 2;
+ __u64 ed : 1;
+ __u64 bn : 1;
+ __u64 reserved4 : 19;
+};
+
+/*
+ * CPU type, hardware bug flags, and per-CPU state. Frequently used
+ * state comes earlier:
+ */
+struct cpuinfo_ia64 {
+ __u32 softirq_pending;
+ __u64 itm_delta; /* # of clock cycles between clock ticks */
+ __u64 itm_next; /* interval timer mask value to use for next clock tick */
+ __u64 nsec_per_cyc; /* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */
+ __u64 unimpl_va_mask; /* mask of unimplemented virtual address bits (from PAL) */
+ __u64 unimpl_pa_mask; /* mask of unimplemented physical address bits (from PAL) */
+ __u64 *pgd_quick;
+ __u64 *pmd_quick;
+ __u64 pgtable_cache_sz;
+ __u64 itc_freq; /* frequency of ITC counter */
+ __u64 proc_freq; /* frequency of processor */
+ __u64 cyc_per_usec; /* itc_freq/1000000 */
+ __u64 ptce_base;
+ __u32 ptce_count[2];
+ __u32 ptce_stride[2];
+ struct task_struct *ksoftirqd; /* kernel softirq daemon for this CPU */
+
+#ifdef CONFIG_SMP
+ __u64 loops_per_jiffy;
+ int cpu;
+#endif
+
+ /* CPUID-derived information: */
+ __u64 ppn;
+ __u64 features;
+ __u8 number;
+ __u8 revision;
+ __u8 model;
+ __u8 family;
+ __u8 archrev;
+ char vendor[16];
+
+#ifdef CONFIG_NUMA
+ struct ia64_node_data *node_data;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info);
+
+/*
+ * The "local" data variable. It refers to the per-CPU data of the currently executing
+ * CPU, much like "current" points to the per-task data of the currently executing task.
+ * Do not use the address of local_cpu_data, since it will be different from
+ * cpu_data(smp_processor_id())!
+ */
+#define local_cpu_data (&__ia64_per_cpu_var(cpu_info))
+#define cpu_data(cpu) (&per_cpu(cpu_info, cpu))
+
+extern void identify_cpu (struct cpuinfo_ia64 *);
+extern void print_cpu_info (struct cpuinfo_ia64 *);
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define SET_UNALIGN_CTL(task,value) \
+({ \
+ (task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_UAC_MASK) \
+ | (((value) << IA64_THREAD_UAC_SHIFT) & IA64_THREAD_UAC_MASK)); \
+ 0; \
+})
+#define GET_UNALIGN_CTL(task,addr) \
+({ \
+ put_user(((task)->thread.flags & IA64_THREAD_UAC_MASK) >> IA64_THREAD_UAC_SHIFT, \
+ (int __user *) (addr)); \
+})
+
+#define SET_FPEMU_CTL(task,value) \
+({ \
+ (task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_FPEMU_MASK) \
+ | (((value) << IA64_THREAD_FPEMU_SHIFT) & IA64_THREAD_FPEMU_MASK)); \
+ 0; \
+})
+#define GET_FPEMU_CTL(task,addr) \
+({ \
+ put_user(((task)->thread.flags & IA64_THREAD_FPEMU_MASK) >> IA64_THREAD_FPEMU_SHIFT, \
+ (int __user *) (addr)); \
+})
+
+#ifdef CONFIG_IA32_SUPPORT
+struct desc_struct {
+ unsigned int a, b;
+};
+
+#define desc_empty(desc) (!((desc)->a + (desc)->b))
+#define desc_equal(desc1, desc2) (((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
+
+#define GDT_ENTRY_TLS_ENTRIES 3
+#define GDT_ENTRY_TLS_MIN 6
+#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
+
+struct partial_page_list;
+#endif
+
+struct thread_struct {
+ __u32 flags; /* various thread flags (see IA64_THREAD_*) */
+ /* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */
+ __u8 on_ustack; /* executing on user-stacks? */
+ __u8 pad[3];
+ __u64 ksp; /* kernel stack pointer */
+ __u64 map_base; /* base address for get_unmapped_area() */
+ __u64 task_size; /* limit for task size */
+ __u64 rbs_bot; /* the base address for the RBS */
+ int last_fph_cpu; /* CPU that may hold the contents of f32-f127 */
+
+#ifdef CONFIG_IA32_SUPPORT
+ __u64 eflag; /* IA32 EFLAGS reg */
+ __u64 fsr; /* IA32 floating pt status reg */
+ __u64 fcr; /* IA32 floating pt control reg */
+ __u64 fir; /* IA32 fp except. instr. reg */
+ __u64 fdr; /* IA32 fp except. data reg */
+ __u64 old_k1; /* old value of ar.k1 */
+ __u64 old_iob; /* old IOBase value */
+ struct partial_page_list *ppl; /* partial page list for 4K page size issue */
+ /* cached TLS descriptors. */
+ struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+
+# define INIT_THREAD_IA32 .eflag = 0, \
+ .fsr = 0, \
+ .fcr = 0x17800000037fULL, \
+ .fir = 0, \
+ .fdr = 0, \
+ .old_k1 = 0, \
+ .old_iob = 0, \
+ .ppl = NULL,
+#else
+# define INIT_THREAD_IA32
+#endif /* CONFIG_IA32_SUPPORT */
+#ifdef CONFIG_PERFMON
+ __u64 pmcs[IA64_NUM_PMC_REGS];
+ __u64 pmds[IA64_NUM_PMD_REGS];
+ void *pfm_context; /* pointer to detailed PMU context */
+ unsigned long pfm_needs_checking; /* when >0, pending perfmon work on kernel exit */
+# define INIT_THREAD_PM .pmcs = {0UL, }, \
+ .pmds = {0UL, }, \
+ .pfm_context = NULL, \
+ .pfm_needs_checking = 0UL,
+#else
+# define INIT_THREAD_PM
+#endif
+ __u64 dbr[IA64_NUM_DBG_REGS];
+ __u64 ibr[IA64_NUM_DBG_REGS];
+ struct ia64_fpreg fph[96]; /* saved/loaded on demand */
+};
+
+#define INIT_THREAD { \
+ .flags = 0, \
+ .on_ustack = 0, \
+ .ksp = 0, \
+ .map_base = DEFAULT_MAP_BASE, \
+ .rbs_bot = STACK_TOP - DEFAULT_USER_STACK_SIZE, \
+ .task_size = DEFAULT_TASK_SIZE, \
+ .last_fph_cpu = -1, \
+ INIT_THREAD_IA32 \
+ INIT_THREAD_PM \
+ .dbr = {0, }, \
+ .ibr = {0, }, \
+ .fph = {{{{0}}}, } \
+}
+
+#define start_thread(regs,new_ip,new_sp) do { \
+ set_fs(USER_DS); \
+ regs->cr_ipsr = ((regs->cr_ipsr | (IA64_PSR_BITS_TO_SET | IA64_PSR_CPL)) \
+ & ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_RI | IA64_PSR_IS)); \
+ regs->cr_iip = new_ip; \
+ regs->ar_rsc = 0xf; /* eager mode, privilege level 3 */ \
+ regs->ar_rnat = 0; \
+ regs->ar_bspstore = current->thread.rbs_bot; \
+ regs->ar_fpsr = FPSR_DEFAULT; \
+ regs->loadrs = 0; \
+ regs->r8 = current->mm->dumpable; /* set "don't zap registers" flag */ \
+ regs->r12 = new_sp - 16; /* allocate 16 byte scratch area */ \
+ if (unlikely(!current->mm->dumpable)) { \
+ /* \
+ * Zap scratch regs to avoid leaking bits between processes with different \
+ * uid/privileges. \
+ */ \
+ regs->ar_pfs = 0; regs->b0 = 0; regs->pr = 0; \
+ regs->r1 = 0; regs->r9 = 0; regs->r11 = 0; regs->r13 = 0; regs->r15 = 0; \
+ } \
+} while (0)
+
+/* Forward declarations, a strange C thing... */
+struct mm_struct;
+struct task_struct;
+
+/*
+ * Free all resources held by a thread. This is called after the
+ * parent of DEAD_TASK has collected the exit status of the task via
+ * wait().
+ */
+#define release_thread(dead_task)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+/*
+ * This is the mechanism for creating a new kernel thread.
+ *
+ * NOTE 1: Only a kernel-only process (ie the swapper or direct
+ * descendants who haven't done an "execve()") should use this: it
+ * will work within a system call from a "real" process, but the
+ * process memory space will not be free'd until both the parent and
+ * the child have exited.
+ *
+ * NOTE 2: This MUST NOT be an inlined function. Otherwise, we get
+ * into trouble in init/main.c when the child thread returns to
+ * do_basic_setup() and the timing is such that free_initmem() has
+ * been called already.
+ */
+extern pid_t kernel_thread (int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Get wait channel for task P. */
+extern unsigned long get_wchan (struct task_struct *p);
+
+/* Return instruction pointer of blocked task TSK. */
+#define KSTK_EIP(tsk) \
+ ({ \
+ struct pt_regs *_regs = ia64_task_regs(tsk); \
+ _regs->cr_iip + ia64_psr(_regs)->ri; \
+ })
+
+/* Return stack pointer of blocked task TSK. */
+#define KSTK_ESP(tsk) ((tsk)->thread.ksp)
+
+extern void ia64_getreg_unknown_kr (void);
+extern void ia64_setreg_unknown_kr (void);
+
+#define ia64_get_kr(regnum) \
+({ \
+ unsigned long r = 0; \
+ \
+ switch (regnum) { \
+ case 0: r = ia64_getreg(_IA64_REG_AR_KR0); break; \
+ case 1: r = ia64_getreg(_IA64_REG_AR_KR1); break; \
+ case 2: r = ia64_getreg(_IA64_REG_AR_KR2); break; \
+ case 3: r = ia64_getreg(_IA64_REG_AR_KR3); break; \
+ case 4: r = ia64_getreg(_IA64_REG_AR_KR4); break; \
+ case 5: r = ia64_getreg(_IA64_REG_AR_KR5); break; \
+ case 6: r = ia64_getreg(_IA64_REG_AR_KR6); break; \
+ case 7: r = ia64_getreg(_IA64_REG_AR_KR7); break; \
+ default: ia64_getreg_unknown_kr(); break; \
+ } \
+ r; \
+})
+
+#define ia64_set_kr(regnum, r) \
+({ \
+ switch (regnum) { \
+ case 0: ia64_setreg(_IA64_REG_AR_KR0, r); break; \
+ case 1: ia64_setreg(_IA64_REG_AR_KR1, r); break; \
+ case 2: ia64_setreg(_IA64_REG_AR_KR2, r); break; \
+ case 3: ia64_setreg(_IA64_REG_AR_KR3, r); break; \
+ case 4: ia64_setreg(_IA64_REG_AR_KR4, r); break; \
+ case 5: ia64_setreg(_IA64_REG_AR_KR5, r); break; \
+ case 6: ia64_setreg(_IA64_REG_AR_KR6, r); break; \
+ case 7: ia64_setreg(_IA64_REG_AR_KR7, r); break; \
+ default: ia64_setreg_unknown_kr(); break; \
+ } \
+})
+
+/*
+ * The following three macros can't be inline functions because we don't have struct
+ * task_struct at this point.
+ */
+
+/* Return TRUE if task T owns the fph partition of the CPU we're running on. */
+#define ia64_is_local_fpu_owner(t) \
+({ \
+ struct task_struct *__ia64_islfo_task = (t); \
+ (__ia64_islfo_task->thread.last_fph_cpu == smp_processor_id() \
+ && __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER)); \
+})
+
+/* Mark task T as owning the fph partition of the CPU we're running on. */
+#define ia64_set_local_fpu_owner(t) do { \
+ struct task_struct *__ia64_slfo_task = (t); \
+ __ia64_slfo_task->thread.last_fph_cpu = smp_processor_id(); \
+ ia64_set_kr(IA64_KR_FPU_OWNER, (unsigned long) __ia64_slfo_task); \
+} while (0)
+
+/* Mark the fph partition of task T as being invalid on all CPUs. */
+#define ia64_drop_fpu(t) ((t)->thread.last_fph_cpu = -1)
+
+extern void __ia64_init_fpu (void);
+extern void __ia64_save_fpu (struct ia64_fpreg *fph);
+extern void __ia64_load_fpu (struct ia64_fpreg *fph);
+extern void ia64_save_debug_regs (unsigned long *save_area);
+extern void ia64_load_debug_regs (unsigned long *save_area);
+
+#ifdef CONFIG_IA32_SUPPORT
+extern void ia32_save_state (struct task_struct *task);
+extern void ia32_load_state (struct task_struct *task);
+#endif
+
+#define ia64_fph_enable() do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+#define ia64_fph_disable() do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+
+/* load fp 0.0 into fph */
+static inline void
+ia64_init_fpu (void) {
+ ia64_fph_enable();
+ __ia64_init_fpu();
+ ia64_fph_disable();
+}
+
+/* save f32-f127 at FPH */
+static inline void
+ia64_save_fpu (struct ia64_fpreg *fph) {
+ ia64_fph_enable();
+ __ia64_save_fpu(fph);
+ ia64_fph_disable();
+}
+
+/* load f32-f127 from FPH */
+static inline void
+ia64_load_fpu (struct ia64_fpreg *fph) {
+ ia64_fph_enable();
+ __ia64_load_fpu(fph);
+ ia64_fph_disable();
+}
+
+static inline __u64
+ia64_clear_ic (void)
+{
+ __u64 psr;
+ psr = ia64_getreg(_IA64_REG_PSR);
+ ia64_stop();
+ ia64_rsm(IA64_PSR_I | IA64_PSR_IC);
+ ia64_srlz_i();
+ return psr;
+}
+
+/*
+ * Restore the psr.
+ */
+static inline void
+ia64_set_psr (__u64 psr)
+{
+ ia64_stop();
+ ia64_setreg(_IA64_REG_PSR_L, psr);
+ ia64_srlz_d();
+}
+
+/*
+ * Insert a translation into an instruction and/or data translation
+ * register.
+ */
+static inline void
+ia64_itr (__u64 target_mask, __u64 tr_num,
+ __u64 vmaddr, __u64 pte,
+ __u64 log_page_size)
+{
+ ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+ ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+ ia64_stop();
+ if (target_mask & 0x1)
+ ia64_itri(tr_num, pte);
+ if (target_mask & 0x2)
+ ia64_itrd(tr_num, pte);
+}
+
+/*
+ * Insert a translation into the instruction and/or data translation
+ * cache.
+ */
+static inline void
+ia64_itc (__u64 target_mask, __u64 vmaddr, __u64 pte,
+ __u64 log_page_size)
+{
+ ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+ ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+ ia64_stop();
+ /* as per EAS2.6, itc must be the last instruction in an instruction group */
+ if (target_mask & 0x1)
+ ia64_itci(pte);
+ if (target_mask & 0x2)
+ ia64_itcd(pte);
+}
+
+/*
+ * Purge a range of addresses from instruction and/or data translation
+ * register(s).
+ */
+static inline void
+ia64_ptr (__u64 target_mask, __u64 vmaddr, __u64 log_size)
+{
+ if (target_mask & 0x1)
+ ia64_ptri(vmaddr, (log_size << 2));
+ if (target_mask & 0x2)
+ ia64_ptrd(vmaddr, (log_size << 2));
+}
+
+/* Set the interrupt vector address. The address must be suitably aligned (32KB). */
+static inline void
+ia64_set_iva (void *ivt_addr)
+{
+ ia64_setreg(_IA64_REG_CR_IVA, (__u64) ivt_addr);
+ ia64_srlz_i();
+}
+
+/* Set the page table address and control bits. */
+static inline void
+ia64_set_pta (__u64 pta)
+{
+ /* Note: srlz.i implies srlz.d */
+ ia64_setreg(_IA64_REG_CR_PTA, pta);
+ ia64_srlz_i();
+}
+
+static inline void
+ia64_eoi (void)
+{
+ ia64_setreg(_IA64_REG_CR_EOI, 0);
+ ia64_srlz_d();
+}
+
+#define cpu_relax() ia64_hint(ia64_hint_pause)
+
+static inline void
+ia64_set_lrr0 (unsigned long val)
+{
+ ia64_setreg(_IA64_REG_CR_LRR0, val);
+ ia64_srlz_d();
+}
+
+static inline void
+ia64_set_lrr1 (unsigned long val)
+{
+ ia64_setreg(_IA64_REG_CR_LRR1, val);
+ ia64_srlz_d();
+}
+
+
+/*
+ * Given the address to which a spill occurred, return the unat bit
+ * number that corresponds to this address.
+ */
+static inline __u64
+ia64_unat_pos (void *spill_addr)
+{
+ return ((__u64) spill_addr >> 3) & 0x3f;
+}
+
+/*
+ * Set the NaT bit of an integer register which was spilled at address
+ * SPILL_ADDR. UNAT is the mask to be updated.
+ */
+static inline void
+ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat)
+{
+ __u64 bit = ia64_unat_pos(spill_addr);
+ __u64 mask = 1UL << bit;
+
+ *unat = (*unat & ~mask) | (nat << bit);
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ * Note that the only way T can block is through a call to schedule() -> switch_to().
+ */
+static inline unsigned long
+thread_saved_pc (struct task_struct *t)
+{
+ struct unw_frame_info info;
+ unsigned long ip;
+
+ unw_init_from_blocked_task(&info, t);
+ if (unw_unwind(&info) < 0)
+ return 0;
+ unw_get_ip(&info, &ip);
+ return ip;
+}
+
+/*
+ * Get the current instruction/program counter value.
+ */
+#define current_text_addr() \
+ ({ void *_pc; _pc = (void *)ia64_getreg(_IA64_REG_IP); _pc; })
+
+static inline __u64
+ia64_get_ivr (void)
+{
+ __u64 r;
+ ia64_srlz_d();
+ r = ia64_getreg(_IA64_REG_CR_IVR);
+ ia64_srlz_d();
+ return r;
+}
+
+static inline void
+ia64_set_dbr (__u64 regnum, __u64 value)
+{
+ __ia64_set_dbr(regnum, value);
+#ifdef CONFIG_ITANIUM
+ ia64_srlz_d();
+#endif
+}
+
+static inline __u64
+ia64_get_dbr (__u64 regnum)
+{
+ __u64 retval;
+
+ retval = __ia64_get_dbr(regnum);
+#ifdef CONFIG_ITANIUM
+ ia64_srlz_d();
+#endif
+ return retval;
+}
+
+static inline __u64
+ia64_rotr (__u64 w, __u64 n)
+{
+ return (w >> n) | (w << (64 - n));
+}
+
+#define ia64_rotl(w,n) ia64_rotr((w), (64) - (n))
+
+/*
+ * Take a mapped kernel address and return the equivalent address
+ * in the region 7 identity mapped virtual area.
+ */
+static inline void *
+ia64_imva (void *addr)
+{
+ void *result;
+ result = (void *) ia64_tpa(addr);
+ return __va(result);
+}
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+#define PREFETCH_STRIDE L1_CACHE_BYTES
+
+static inline void
+prefetch (const void *x)
+{
+ ia64_lfetch(ia64_lfhint_none, x);
+}
+
+static inline void
+prefetchw (const void *x)
+{
+ ia64_lfetch_excl(ia64_lfhint_none, x);
+}
+
+#define spin_lock_prefetch(x) prefetchw(x)
+
+extern unsigned long boot_option_idle_override;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PROCESSOR_H */
diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h
new file mode 100644
index 0000000..0bef195
--- /dev/null
+++ b/include/asm-ia64/ptrace.h
@@ -0,0 +1,337 @@
+#ifndef _ASM_IA64_PTRACE_H
+#define _ASM_IA64_PTRACE_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 2003 Intel Co
+ * Suresh Siddha <suresh.b.siddha@intel.com>
+ * Fenghua Yu <fenghua.yu@intel.com>
+ * Arun Sharma <arun.sharma@intel.com>
+ *
+ * 12/07/98 S. Eranian added pt_regs & switch_stack
+ * 12/21/98 D. Mosberger updated to match latest code
+ * 6/17/99 D. Mosberger added second unat member to "struct switch_stack"
+ *
+ */
+/*
+ * When a user process is blocked, its state looks as follows:
+ *
+ * +----------------------+ ------- IA64_STK_OFFSET
+ * | | ^
+ * | struct pt_regs | |
+ * | | |
+ * +----------------------+ |
+ * | | |
+ * | memory stack | |
+ * | (growing downwards) | |
+ * //.....................// |
+ * |
+ * //.....................// |
+ * | | |
+ * +----------------------+ |
+ * | struct switch_stack | |
+ * | | |
+ * +----------------------+ |
+ * | | |
+ * //.....................// |
+ * |
+ * //.....................// |
+ * | | |
+ * | register stack | |
+ * | (growing upwards) | |
+ * | | |
+ * +----------------------+ | --- IA64_RBS_OFFSET
+ * | struct thread_info | | ^
+ * +----------------------+ | |
+ * | | | |
+ * | struct task_struct | | |
+ * current -> | | | |
+ * +----------------------+ -------
+ *
+ * Note that ar.ec is not saved explicitly in pt_reg or switch_stack.
+ * This is because ar.ec is saved as part of ar.pfs.
+ */
+
+#include <linux/config.h>
+
+#include <asm/fpu.h>
+#include <asm/offsets.h>
+
+/*
+ * Base-2 logarithm of number of pages to allocate per task structure
+ * (including register backing store and memory stack):
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define KERNEL_STACK_SIZE_ORDER 3
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define KERNEL_STACK_SIZE_ORDER 2
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define KERNEL_STACK_SIZE_ORDER 1
+#else
+# define KERNEL_STACK_SIZE_ORDER 0
+#endif
+
+#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 15) & ~15)
+#define IA64_STK_OFFSET ((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
+
+#define KERNEL_STACK_SIZE IA64_STK_OFFSET
+
+#ifndef __ASSEMBLY__
+
+#include <asm/current.h>
+#include <asm/page.h>
+
+/*
+ * This struct defines the way the registers are saved on system
+ * calls.
+ *
+ * We don't save all floating point register because the kernel
+ * is compiled to use only a very small subset, so the other are
+ * untouched.
+ *
+ * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE
+ * (because the memory stack pointer MUST ALWAYS be aligned this way)
+ *
+ */
+struct pt_regs {
+ /* The following registers are saved by SAVE_MIN: */
+ unsigned long b6; /* scratch */
+ unsigned long b7; /* scratch */
+
+ unsigned long ar_csd; /* used by cmp8xchg16 (scratch) */
+ unsigned long ar_ssd; /* reserved for future use (scratch) */
+
+ unsigned long r8; /* scratch (return value register 0) */
+ unsigned long r9; /* scratch (return value register 1) */
+ unsigned long r10; /* scratch (return value register 2) */
+ unsigned long r11; /* scratch (return value register 3) */
+
+ unsigned long cr_ipsr; /* interrupted task's psr */
+ unsigned long cr_iip; /* interrupted task's instruction pointer */
+ /*
+ * interrupted task's function state; if bit 63 is cleared, it
+ * contains syscall's ar.pfs.pfm:
+ */
+ unsigned long cr_ifs;
+
+ unsigned long ar_unat; /* interrupted task's NaT register (preserved) */
+ unsigned long ar_pfs; /* prev function state */
+ unsigned long ar_rsc; /* RSE configuration */
+ /* The following two are valid only if cr_ipsr.cpl > 0: */
+ unsigned long ar_rnat; /* RSE NaT */
+ unsigned long ar_bspstore; /* RSE bspstore */
+
+ unsigned long pr; /* 64 predicate registers (1 bit each) */
+ unsigned long b0; /* return pointer (bp) */
+ unsigned long loadrs; /* size of dirty partition << 16 */
+
+ unsigned long r1; /* the gp pointer */
+ unsigned long r12; /* interrupted task's memory stack pointer */
+ unsigned long r13; /* thread pointer */
+
+ unsigned long ar_fpsr; /* floating point status (preserved) */
+ unsigned long r15; /* scratch */
+
+ /* The remaining registers are NOT saved for system calls. */
+
+ unsigned long r14; /* scratch */
+ unsigned long r2; /* scratch */
+ unsigned long r3; /* scratch */
+
+ /* The following registers are saved by SAVE_REST: */
+ unsigned long r16; /* scratch */
+ unsigned long r17; /* scratch */
+ unsigned long r18; /* scratch */
+ unsigned long r19; /* scratch */
+ unsigned long r20; /* scratch */
+ unsigned long r21; /* scratch */
+ unsigned long r22; /* scratch */
+ unsigned long r23; /* scratch */
+ unsigned long r24; /* scratch */
+ unsigned long r25; /* scratch */
+ unsigned long r26; /* scratch */
+ unsigned long r27; /* scratch */
+ unsigned long r28; /* scratch */
+ unsigned long r29; /* scratch */
+ unsigned long r30; /* scratch */
+ unsigned long r31; /* scratch */
+
+ unsigned long ar_ccv; /* compare/exchange value (scratch) */
+
+ /*
+ * Floating point registers that the kernel considers scratch:
+ */
+ struct ia64_fpreg f6; /* scratch */
+ struct ia64_fpreg f7; /* scratch */
+ struct ia64_fpreg f8; /* scratch */
+ struct ia64_fpreg f9; /* scratch */
+ struct ia64_fpreg f10; /* scratch */
+ struct ia64_fpreg f11; /* scratch */
+};
+
+/*
+ * This structure contains the addition registers that need to
+ * preserved across a context switch. This generally consists of
+ * "preserved" registers.
+ */
+struct switch_stack {
+ unsigned long caller_unat; /* user NaT collection register (preserved) */
+ unsigned long ar_fpsr; /* floating-point status register */
+
+ struct ia64_fpreg f2; /* preserved */
+ struct ia64_fpreg f3; /* preserved */
+ struct ia64_fpreg f4; /* preserved */
+ struct ia64_fpreg f5; /* preserved */
+
+ struct ia64_fpreg f12; /* scratch, but untouched by kernel */
+ struct ia64_fpreg f13; /* scratch, but untouched by kernel */
+ struct ia64_fpreg f14; /* scratch, but untouched by kernel */
+ struct ia64_fpreg f15; /* scratch, but untouched by kernel */
+ struct ia64_fpreg f16; /* preserved */
+ struct ia64_fpreg f17; /* preserved */
+ struct ia64_fpreg f18; /* preserved */
+ struct ia64_fpreg f19; /* preserved */
+ struct ia64_fpreg f20; /* preserved */
+ struct ia64_fpreg f21; /* preserved */
+ struct ia64_fpreg f22; /* preserved */
+ struct ia64_fpreg f23; /* preserved */
+ struct ia64_fpreg f24; /* preserved */
+ struct ia64_fpreg f25; /* preserved */
+ struct ia64_fpreg f26; /* preserved */
+ struct ia64_fpreg f27; /* preserved */
+ struct ia64_fpreg f28; /* preserved */
+ struct ia64_fpreg f29; /* preserved */
+ struct ia64_fpreg f30; /* preserved */
+ struct ia64_fpreg f31; /* preserved */
+
+ unsigned long r4; /* preserved */
+ unsigned long r5; /* preserved */
+ unsigned long r6; /* preserved */
+ unsigned long r7; /* preserved */
+
+ unsigned long b0; /* so we can force a direct return in copy_thread */
+ unsigned long b1;
+ unsigned long b2;
+ unsigned long b3;
+ unsigned long b4;
+ unsigned long b5;
+
+ unsigned long ar_pfs; /* previous function state */
+ unsigned long ar_lc; /* loop counter (preserved) */
+ unsigned long ar_unat; /* NaT bits for r4-r7 */
+ unsigned long ar_rnat; /* RSE NaT collection register */
+ unsigned long ar_bspstore; /* RSE dirty base (preserved) */
+ unsigned long pr; /* 64 predicate registers (1 bit each) */
+};
+
+#ifdef __KERNEL__
+/*
+ * We use the ia64_psr(regs)->ri to determine which of the three
+ * instructions in bundle (16 bytes) took the sample. Generate
+ * the canonical representation by adding to instruction pointer.
+ */
+# define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri)
+/* Conserve space in histogram by encoding slot bits in address
+ * bits 2 and 3 rather than bits 0 and 1.
+ */
+#define profile_pc(regs) \
+({ \
+ unsigned long __ip = instruction_pointer(regs); \
+ (__ip & ~3UL) + ((__ip & 3UL) << 2); \
+})
+
+ /* given a pointer to a task_struct, return the user's pt_regs */
+# define ia64_task_regs(t) (((struct pt_regs *) ((char *) (t) + IA64_STK_OFFSET)) - 1)
+# define ia64_psr(regs) ((struct ia64_psr *) &(regs)->cr_ipsr)
+# define user_mode(regs) (((struct ia64_psr *) &(regs)->cr_ipsr)->cpl != 0)
+# define user_stack(task,regs) ((long) regs - (long) task == IA64_STK_OFFSET - sizeof(*regs))
+# define fsys_mode(task,regs) \
+ ({ \
+ struct task_struct *_task = (task); \
+ struct pt_regs *_regs = (regs); \
+ !user_mode(_regs) && user_stack(_task, _regs); \
+ })
+
+ /*
+ * System call handlers that, upon successful completion, need to return a negative value
+ * should call force_successful_syscall_return() right before returning. On architectures
+ * where the syscall convention provides for a separate error flag (e.g., alpha, ia64,
+ * ppc{,64}, sparc{,64}, possibly others), this macro can be used to ensure that the error
+ * flag will not get set. On architectures which do not support a separate error flag,
+ * the macro is a no-op and the spurious error condition needs to be filtered out by some
+ * other means (e.g., in user-level, by passing an extra argument to the syscall handler,
+ * or something along those lines).
+ *
+ * On ia64, we can clear the user's pt_regs->r8 to force a successful syscall.
+ */
+# define force_successful_syscall_return() (ia64_task_regs(current)->r8 = 0)
+
+ struct task_struct; /* forward decl */
+ struct unw_frame_info; /* forward decl */
+
+ extern void show_regs (struct pt_regs *);
+ extern void ia64_do_show_stack (struct unw_frame_info *, void *);
+ extern unsigned long ia64_get_user_rbs_end (struct task_struct *, struct pt_regs *,
+ unsigned long *);
+ extern long ia64_peek (struct task_struct *, struct switch_stack *, unsigned long,
+ unsigned long, long *);
+ extern long ia64_poke (struct task_struct *, struct switch_stack *, unsigned long,
+ unsigned long, long);
+ extern void ia64_flush_fph (struct task_struct *);
+ extern void ia64_sync_fph (struct task_struct *);
+ extern long ia64_sync_user_rbs (struct task_struct *, struct switch_stack *,
+ unsigned long, unsigned long);
+
+ /* get nat bits for scratch registers such that bit N==1 iff scratch register rN is a NaT */
+ extern unsigned long ia64_get_scratch_nat_bits (struct pt_regs *pt, unsigned long scratch_unat);
+ /* put nat bits for scratch registers such that scratch register rN is a NaT iff bit N==1 */
+ extern unsigned long ia64_put_scratch_nat_bits (struct pt_regs *pt, unsigned long nat);
+
+ extern void ia64_increment_ip (struct pt_regs *pt);
+ extern void ia64_decrement_ip (struct pt_regs *pt);
+
+#endif /* !__KERNEL__ */
+
+/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
+struct pt_all_user_regs {
+ unsigned long nat;
+ unsigned long cr_iip;
+ unsigned long cfm;
+ unsigned long cr_ipsr;
+ unsigned long pr;
+
+ unsigned long gr[32];
+ unsigned long br[8];
+ unsigned long ar[128];
+ struct ia64_fpreg fr[128];
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* indices to application-registers array in pt_all_user_regs */
+#define PT_AUR_RSC 16
+#define PT_AUR_BSP 17
+#define PT_AUR_BSPSTORE 18
+#define PT_AUR_RNAT 19
+#define PT_AUR_CCV 32
+#define PT_AUR_UNAT 36
+#define PT_AUR_FPSR 40
+#define PT_AUR_PFS 64
+#define PT_AUR_LC 65
+#define PT_AUR_EC 66
+
+/*
+ * The numbers chosen here are somewhat arbitrary but absolutely MUST
+ * not overlap with any of the number assigned in <linux/ptrace.h>.
+ */
+#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */
+#define PTRACE_OLD_GETSIGINFO 13 /* (replaced by PTRACE_GETSIGINFO in <linux/ptrace.h>) */
+#define PTRACE_OLD_SETSIGINFO 14 /* (replaced by PTRACE_SETSIGINFO in <linux/ptrace.h>) */
+#define PTRACE_GETREGS 18 /* get all registers (pt_all_user_regs) in one shot */
+#define PTRACE_SETREGS 19 /* set all registers (pt_all_user_regs) in one shot */
+
+#define PTRACE_OLDSETOPTIONS 21
+
+#endif /* _ASM_IA64_PTRACE_H */
diff --git a/include/asm-ia64/ptrace_offsets.h b/include/asm-ia64/ptrace_offsets.h
new file mode 100644
index 0000000..b712773
--- /dev/null
+++ b/include/asm-ia64/ptrace_offsets.h
@@ -0,0 +1,268 @@
+#ifndef _ASM_IA64_PTRACE_OFFSETS_H
+#define _ASM_IA64_PTRACE_OFFSETS_H
+
+/*
+ * Copyright (C) 1999, 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * The "uarea" that can be accessed via PEEKUSER and POKEUSER is a
+ * virtual structure that would have the following definition:
+ *
+ * struct uarea {
+ * struct ia64_fpreg fph[96]; // f32-f127
+ * unsigned long nat_bits;
+ * unsigned long empty1;
+ * struct ia64_fpreg f2; // f2-f5
+ * :
+ * struct ia64_fpreg f5;
+ * struct ia64_fpreg f10; // f10-f31
+ * :
+ * struct ia64_fpreg f31;
+ * unsigned long r4; // r4-r7
+ * :
+ * unsigned long r7;
+ * unsigned long b1; // b1-b5
+ * :
+ * unsigned long b5;
+ * unsigned long ar_ec;
+ * unsigned long ar_lc;
+ * unsigned long empty2[5];
+ * unsigned long cr_ipsr;
+ * unsigned long cr_iip;
+ * unsigned long cfm;
+ * unsigned long ar_unat;
+ * unsigned long ar_pfs;
+ * unsigned long ar_rsc;
+ * unsigned long ar_rnat;
+ * unsigned long ar_bspstore;
+ * unsigned long pr;
+ * unsigned long b6;
+ * unsigned long ar_bsp;
+ * unsigned long r1;
+ * unsigned long r2;
+ * unsigned long r3;
+ * unsigned long r12;
+ * unsigned long r13;
+ * unsigned long r14;
+ * unsigned long r15;
+ * unsigned long r8;
+ * unsigned long r9;
+ * unsigned long r10;
+ * unsigned long r11;
+ * unsigned long r16;
+ * :
+ * unsigned long r31;
+ * unsigned long ar_ccv;
+ * unsigned long ar_fpsr;
+ * unsigned long b0;
+ * unsigned long b7;
+ * unsigned long f6;
+ * unsigned long f7;
+ * unsigned long f8;
+ * unsigned long f9;
+ * unsigned long ar_csd;
+ * unsigned long ar_ssd;
+ * unsigned long rsvd1[710];
+ * unsigned long dbr[8];
+ * unsigned long rsvd2[504];
+ * unsigned long ibr[8];
+ * unsigned long rsvd3[504];
+ * unsigned long pmd[4];
+ * }
+ */
+
+/* fph: */
+#define PT_F32 0x0000
+#define PT_F33 0x0010
+#define PT_F34 0x0020
+#define PT_F35 0x0030
+#define PT_F36 0x0040
+#define PT_F37 0x0050
+#define PT_F38 0x0060
+#define PT_F39 0x0070
+#define PT_F40 0x0080
+#define PT_F41 0x0090
+#define PT_F42 0x00a0
+#define PT_F43 0x00b0
+#define PT_F44 0x00c0
+#define PT_F45 0x00d0
+#define PT_F46 0x00e0
+#define PT_F47 0x00f0
+#define PT_F48 0x0100
+#define PT_F49 0x0110
+#define PT_F50 0x0120
+#define PT_F51 0x0130
+#define PT_F52 0x0140
+#define PT_F53 0x0150
+#define PT_F54 0x0160
+#define PT_F55 0x0170
+#define PT_F56 0x0180
+#define PT_F57 0x0190
+#define PT_F58 0x01a0
+#define PT_F59 0x01b0
+#define PT_F60 0x01c0
+#define PT_F61 0x01d0
+#define PT_F62 0x01e0
+#define PT_F63 0x01f0
+#define PT_F64 0x0200
+#define PT_F65 0x0210
+#define PT_F66 0x0220
+#define PT_F67 0x0230
+#define PT_F68 0x0240
+#define PT_F69 0x0250
+#define PT_F70 0x0260
+#define PT_F71 0x0270
+#define PT_F72 0x0280
+#define PT_F73 0x0290
+#define PT_F74 0x02a0
+#define PT_F75 0x02b0
+#define PT_F76 0x02c0
+#define PT_F77 0x02d0
+#define PT_F78 0x02e0
+#define PT_F79 0x02f0
+#define PT_F80 0x0300
+#define PT_F81 0x0310
+#define PT_F82 0x0320
+#define PT_F83 0x0330
+#define PT_F84 0x0340
+#define PT_F85 0x0350
+#define PT_F86 0x0360
+#define PT_F87 0x0370
+#define PT_F88 0x0380
+#define PT_F89 0x0390
+#define PT_F90 0x03a0
+#define PT_F91 0x03b0
+#define PT_F92 0x03c0
+#define PT_F93 0x03d0
+#define PT_F94 0x03e0
+#define PT_F95 0x03f0
+#define PT_F96 0x0400
+#define PT_F97 0x0410
+#define PT_F98 0x0420
+#define PT_F99 0x0430
+#define PT_F100 0x0440
+#define PT_F101 0x0450
+#define PT_F102 0x0460
+#define PT_F103 0x0470
+#define PT_F104 0x0480
+#define PT_F105 0x0490
+#define PT_F106 0x04a0
+#define PT_F107 0x04b0
+#define PT_F108 0x04c0
+#define PT_F109 0x04d0
+#define PT_F110 0x04e0
+#define PT_F111 0x04f0
+#define PT_F112 0x0500
+#define PT_F113 0x0510
+#define PT_F114 0x0520
+#define PT_F115 0x0530
+#define PT_F116 0x0540
+#define PT_F117 0x0550
+#define PT_F118 0x0560
+#define PT_F119 0x0570
+#define PT_F120 0x0580
+#define PT_F121 0x0590
+#define PT_F122 0x05a0
+#define PT_F123 0x05b0
+#define PT_F124 0x05c0
+#define PT_F125 0x05d0
+#define PT_F126 0x05e0
+#define PT_F127 0x05f0
+
+#define PT_NAT_BITS 0x0600
+
+#define PT_F2 0x0610
+#define PT_F3 0x0620
+#define PT_F4 0x0630
+#define PT_F5 0x0640
+#define PT_F10 0x0650
+#define PT_F11 0x0660
+#define PT_F12 0x0670
+#define PT_F13 0x0680
+#define PT_F14 0x0690
+#define PT_F15 0x06a0
+#define PT_F16 0x06b0
+#define PT_F17 0x06c0
+#define PT_F18 0x06d0
+#define PT_F19 0x06e0
+#define PT_F20 0x06f0
+#define PT_F21 0x0700
+#define PT_F22 0x0710
+#define PT_F23 0x0720
+#define PT_F24 0x0730
+#define PT_F25 0x0740
+#define PT_F26 0x0750
+#define PT_F27 0x0760
+#define PT_F28 0x0770
+#define PT_F29 0x0780
+#define PT_F30 0x0790
+#define PT_F31 0x07a0
+#define PT_R4 0x07b0
+#define PT_R5 0x07b8
+#define PT_R6 0x07c0
+#define PT_R7 0x07c8
+
+#define PT_B1 0x07d8
+#define PT_B2 0x07e0
+#define PT_B3 0x07e8
+#define PT_B4 0x07f0
+#define PT_B5 0x07f8
+
+#define PT_AR_EC 0x0800
+#define PT_AR_LC 0x0808
+
+#define PT_CR_IPSR 0x0830
+#define PT_CR_IIP 0x0838
+#define PT_CFM 0x0840
+#define PT_AR_UNAT 0x0848
+#define PT_AR_PFS 0x0850
+#define PT_AR_RSC 0x0858
+#define PT_AR_RNAT 0x0860
+#define PT_AR_BSPSTORE 0x0868
+#define PT_PR 0x0870
+#define PT_B6 0x0878
+#define PT_AR_BSP 0x0880 /* note: this points to the *end* of the backing store! */
+#define PT_R1 0x0888
+#define PT_R2 0x0890
+#define PT_R3 0x0898
+#define PT_R12 0x08a0
+#define PT_R13 0x08a8
+#define PT_R14 0x08b0
+#define PT_R15 0x08b8
+#define PT_R8 0x08c0
+#define PT_R9 0x08c8
+#define PT_R10 0x08d0
+#define PT_R11 0x08d8
+#define PT_R16 0x08e0
+#define PT_R17 0x08e8
+#define PT_R18 0x08f0
+#define PT_R19 0x08f8
+#define PT_R20 0x0900
+#define PT_R21 0x0908
+#define PT_R22 0x0910
+#define PT_R23 0x0918
+#define PT_R24 0x0920
+#define PT_R25 0x0928
+#define PT_R26 0x0930
+#define PT_R27 0x0938
+#define PT_R28 0x0940
+#define PT_R29 0x0948
+#define PT_R30 0x0950
+#define PT_R31 0x0958
+#define PT_AR_CCV 0x0960
+#define PT_AR_FPSR 0x0968
+#define PT_B0 0x0970
+#define PT_B7 0x0978
+#define PT_F6 0x0980
+#define PT_F7 0x0990
+#define PT_F8 0x09a0
+#define PT_F9 0x09b0
+#define PT_AR_CSD 0x09c0
+#define PT_AR_SSD 0x09c8
+
+#define PT_DBR 0x2000 /* data breakpoint registers */
+#define PT_IBR 0x3000 /* instruction breakpoint registers */
+#define PT_PMD 0x4000 /* performance monitoring counters */
+
+#endif /* _ASM_IA64_PTRACE_OFFSETS_H */
diff --git a/include/asm-ia64/resource.h b/include/asm-ia64/resource.h
new file mode 100644
index 0000000..77b1eee
--- /dev/null
+++ b/include/asm-ia64/resource.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_IA64_RESOURCE_H
+#define _ASM_IA64_RESOURCE_H
+
+#include <asm/ustack.h>
+#define _STK_LIM_MAX DEFAULT_USER_STACK_SIZE
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_IA64_RESOURCE_H */
diff --git a/include/asm-ia64/rse.h b/include/asm-ia64/rse.h
new file mode 100644
index 0000000..02830a3
--- /dev/null
+++ b/include/asm-ia64/rse.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_RSE_H
+#define _ASM_IA64_RSE_H
+
+/*
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * Register stack engine related helper functions. This file may be
+ * used in applications, so be careful about the name-space and give
+ * some consideration to non-GNU C compilers (though __inline__ is
+ * fine).
+ */
+
+static __inline__ unsigned long
+ia64_rse_slot_num (unsigned long *addr)
+{
+ return (((unsigned long) addr) >> 3) & 0x3f;
+}
+
+/*
+ * Return TRUE if ADDR is the address of an RNAT slot.
+ */
+static __inline__ unsigned long
+ia64_rse_is_rnat_slot (unsigned long *addr)
+{
+ return ia64_rse_slot_num(addr) == 0x3f;
+}
+
+/*
+ * Returns the address of the RNAT slot that covers the slot at
+ * address SLOT_ADDR.
+ */
+static __inline__ unsigned long *
+ia64_rse_rnat_addr (unsigned long *slot_addr)
+{
+ return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3));
+}
+
+/*
+ * Calculate the number of registers in the dirty partition starting at BSPSTORE and
+ * ending at BSP. This isn't simply (BSP-BSPSTORE)/8 because every 64th slot stores
+ * ar.rnat.
+ */
+static __inline__ unsigned long
+ia64_rse_num_regs (unsigned long *bspstore, unsigned long *bsp)
+{
+ unsigned long slots = (bsp - bspstore);
+
+ return slots - (ia64_rse_slot_num(bspstore) + slots)/0x40;
+}
+
+/*
+ * The inverse of the above: given bspstore and the number of
+ * registers, calculate ar.bsp.
+ */
+static __inline__ unsigned long *
+ia64_rse_skip_regs (unsigned long *addr, long num_regs)
+{
+ long delta = ia64_rse_slot_num(addr) + num_regs;
+
+ if (num_regs < 0)
+ delta -= 0x3e;
+ return addr + num_regs + delta/0x3f;
+}
+
+#endif /* _ASM_IA64_RSE_H */
diff --git a/include/asm-ia64/rwsem.h b/include/asm-ia64/rwsem.h
new file mode 100644
index 0000000..6ece506
--- /dev/null
+++ b/include/asm-ia64/rwsem.h
@@ -0,0 +1,188 @@
+/*
+ * asm-ia64/rwsem.h: R/W semaphores for ia64
+ *
+ * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
+ * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
+ *
+ * Based on asm-i386/rwsem.h and other architecture implementation.
+ *
+ * The MSW of the count is the negated number of active writers and
+ * waiting lockers, and the LSW is the total number of active locks.
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case
+ * of an uncontended lock. Readers increment by 1 and see a positive value
+ * when uncontended, negative if there are writers (and maybe) readers
+ * waiting (in which case it goes to sleep).
+ */
+
+#ifndef _ASM_IA64_RWSEM_H
+#define _ASM_IA64_RWSEM_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+#include <asm/intrinsics.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+ signed int count;
+ spinlock_t wait_lock;
+ struct list_head wait_list;
+#if RWSEM_DEBUG
+ int debug;
+#endif
+};
+
+#define RWSEM_UNLOCKED_VALUE 0x00000000
+#define RWSEM_ACTIVE_BIAS 0x00000001
+#define RWSEM_ACTIVE_MASK 0x0000ffff
+#define RWSEM_WAITING_BIAS (-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+/*
+ * initialization
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT , 0
+#else
+#define __RWSEM_DEBUG_INIT /* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+ { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+ LIST_HEAD_INIT((name).wait_list) \
+ __RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name) \
+ struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void
+init_rwsem (struct rw_semaphore *sem)
+{
+ sem->count = RWSEM_UNLOCKED_VALUE;
+ spin_lock_init(&sem->wait_lock);
+ INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+ sem->debug = 0;
+#endif
+}
+
+/*
+ * lock for reading
+ */
+static inline void
+__down_read (struct rw_semaphore *sem)
+{
+ int result = ia64_fetchadd4_acq((unsigned int *)&sem->count, 1);
+
+ if (result < 0)
+ rwsem_down_read_failed(sem);
+}
+
+/*
+ * lock for writing
+ */
+static inline void
+__down_write (struct rw_semaphore *sem)
+{
+ int old, new;
+
+ do {
+ old = sem->count;
+ new = old + RWSEM_ACTIVE_WRITE_BIAS;
+ } while (cmpxchg_acq(&sem->count, old, new) != old);
+
+ if (old != 0)
+ rwsem_down_write_failed(sem);
+}
+
+/*
+ * unlock after reading
+ */
+static inline void
+__up_read (struct rw_semaphore *sem)
+{
+ int result = ia64_fetchadd4_rel((unsigned int *)&sem->count, -1);
+
+ if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0)
+ rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void
+__up_write (struct rw_semaphore *sem)
+{
+ int old, new;
+
+ do {
+ old = sem->count;
+ new = old - RWSEM_ACTIVE_WRITE_BIAS;
+ } while (cmpxchg_rel(&sem->count, old, new) != old);
+
+ if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0)
+ rwsem_wake(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_read_trylock (struct rw_semaphore *sem)
+{
+ int tmp;
+ while ((tmp = sem->count) >= 0) {
+ if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) {
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_write_trylock (struct rw_semaphore *sem)
+{
+ int tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE,
+ RWSEM_ACTIVE_WRITE_BIAS);
+ return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void
+__downgrade_write (struct rw_semaphore *sem)
+{
+ int old, new;
+
+ do {
+ old = sem->count;
+ new = old - RWSEM_WAITING_BIAS;
+ } while (cmpxchg_rel(&sem->count, old, new) != old);
+
+ if (old < 0)
+ rwsem_downgrade_wake(sem);
+}
+
+/*
+ * Implement atomic add functionality. These used to be "inline" functions, but GCC v3.1
+ * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd.
+ */
+#define rwsem_atomic_add(delta, sem) atomic_add(delta, (atomic_t *)(&(sem)->count))
+#define rwsem_atomic_update(delta, sem) atomic_add_return(delta, (atomic_t *)(&(sem)->count))
+
+#endif /* _ASM_IA64_RWSEM_H */
diff --git a/include/asm-ia64/sal.h b/include/asm-ia64/sal.h
new file mode 100644
index 0000000..ea1ed37
--- /dev/null
+++ b/include/asm-ia64/sal.h
@@ -0,0 +1,840 @@
+#ifndef _ASM_IA64_SAL_H
+#define _ASM_IA64_SAL_H
+
+/*
+ * System Abstraction Layer definitions.
+ *
+ * This is based on version 2.5 of the manual "IA-64 System
+ * Abstraction Layer".
+ *
+ * Copyright (C) 2001 Intel
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ * Copyright (C) 2001 Fred Lewis <frederick.v.lewis@intel.com>
+ * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ *
+ * 02/01/04 J. Hall Updated Error Record Structures to conform to July 2001
+ * revision of the SAL spec.
+ * 01/01/03 fvlewis Updated Error Record Structures to conform with Nov. 2000
+ * revision of the SAL spec.
+ * 99/09/29 davidm Updated for SAL 2.6.
+ * 00/03/29 cfleck Updated SAL Error Logging info for processor (SAL 2.6)
+ * (plus examples of platform error info structures from smariset @ Intel)
+ */
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT 0
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT 1
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT 2
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT 3
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK (1<<IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT (1<<IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bcd.h>
+#include <linux/spinlock.h>
+#include <linux/efi.h>
+
+#include <asm/pal.h>
+#include <asm/system.h>
+#include <asm/fpu.h>
+
+extern spinlock_t sal_lock;
+
+/* SAL spec _requires_ eight args for each call. */
+#define __SAL_CALL(result,a0,a1,a2,a3,a4,a5,a6,a7) \
+ result = (*ia64_sal)(a0,a1,a2,a3,a4,a5,a6,a7)
+
+# define SAL_CALL(result,args...) do { \
+ unsigned long __ia64_sc_flags; \
+ struct ia64_fpreg __ia64_sc_fr[6]; \
+ ia64_save_scratch_fpregs(__ia64_sc_fr); \
+ spin_lock_irqsave(&sal_lock, __ia64_sc_flags); \
+ __SAL_CALL(result, args); \
+ spin_unlock_irqrestore(&sal_lock, __ia64_sc_flags); \
+ ia64_load_scratch_fpregs(__ia64_sc_fr); \
+} while (0)
+
+# define SAL_CALL_NOLOCK(result,args...) do { \
+ unsigned long __ia64_scn_flags; \
+ struct ia64_fpreg __ia64_scn_fr[6]; \
+ ia64_save_scratch_fpregs(__ia64_scn_fr); \
+ local_irq_save(__ia64_scn_flags); \
+ __SAL_CALL(result, args); \
+ local_irq_restore(__ia64_scn_flags); \
+ ia64_load_scratch_fpregs(__ia64_scn_fr); \
+} while (0)
+
+# define SAL_CALL_REENTRANT(result,args...) do { \
+ struct ia64_fpreg __ia64_scs_fr[6]; \
+ ia64_save_scratch_fpregs(__ia64_scs_fr); \
+ preempt_disable(); \
+ __SAL_CALL(result, args); \
+ preempt_enable(); \
+ ia64_load_scratch_fpregs(__ia64_scs_fr); \
+} while (0)
+
+#define SAL_SET_VECTORS 0x01000000
+#define SAL_GET_STATE_INFO 0x01000001
+#define SAL_GET_STATE_INFO_SIZE 0x01000002
+#define SAL_CLEAR_STATE_INFO 0x01000003
+#define SAL_MC_RENDEZ 0x01000004
+#define SAL_MC_SET_PARAMS 0x01000005
+#define SAL_REGISTER_PHYSICAL_ADDR 0x01000006
+
+#define SAL_CACHE_FLUSH 0x01000008
+#define SAL_CACHE_INIT 0x01000009
+#define SAL_PCI_CONFIG_READ 0x01000010
+#define SAL_PCI_CONFIG_WRITE 0x01000011
+#define SAL_FREQ_BASE 0x01000012
+
+#define SAL_UPDATE_PAL 0x01000020
+
+struct ia64_sal_retval {
+ /*
+ * A zero status value indicates call completed without error.
+ * A negative status value indicates reason of call failure.
+ * A positive status value indicates success but an
+ * informational value should be printed (e.g., "reboot for
+ * change to take effect").
+ */
+ s64 status;
+ u64 v0;
+ u64 v1;
+ u64 v2;
+};
+
+typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...);
+
+enum {
+ SAL_FREQ_BASE_PLATFORM = 0,
+ SAL_FREQ_BASE_INTERVAL_TIMER = 1,
+ SAL_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+/*
+ * The SAL system table is followed by a variable number of variable
+ * length descriptors. The structure of these descriptors follows
+ * below.
+ * The defininition follows SAL specs from July 2000
+ */
+struct ia64_sal_systab {
+ u8 signature[4]; /* should be "SST_" */
+ u32 size; /* size of this table in bytes */
+ u8 sal_rev_minor;
+ u8 sal_rev_major;
+ u16 entry_count; /* # of entries in variable portion */
+ u8 checksum;
+ u8 reserved1[7];
+ u8 sal_a_rev_minor;
+ u8 sal_a_rev_major;
+ u8 sal_b_rev_minor;
+ u8 sal_b_rev_major;
+ /* oem_id & product_id: terminating NUL is missing if string is exactly 32 bytes long. */
+ u8 oem_id[32];
+ u8 product_id[32]; /* ASCII product id */
+ u8 reserved2[8];
+};
+
+enum sal_systab_entry_type {
+ SAL_DESC_ENTRY_POINT = 0,
+ SAL_DESC_MEMORY = 1,
+ SAL_DESC_PLATFORM_FEATURE = 2,
+ SAL_DESC_TR = 3,
+ SAL_DESC_PTC = 4,
+ SAL_DESC_AP_WAKEUP = 5
+};
+
+/*
+ * Entry type: Size:
+ * 0 48
+ * 1 32
+ * 2 16
+ * 3 32
+ * 4 16
+ * 5 16
+ */
+#define SAL_DESC_SIZE(type) "\060\040\020\040\020\020"[(unsigned) type]
+
+typedef struct ia64_sal_desc_entry_point {
+ u8 type;
+ u8 reserved1[7];
+ u64 pal_proc;
+ u64 sal_proc;
+ u64 gp;
+ u8 reserved2[16];
+}ia64_sal_desc_entry_point_t;
+
+typedef struct ia64_sal_desc_memory {
+ u8 type;
+ u8 used_by_sal; /* needs to be mapped for SAL? */
+ u8 mem_attr; /* current memory attribute setting */
+ u8 access_rights; /* access rights set up by SAL */
+ u8 mem_attr_mask; /* mask of supported memory attributes */
+ u8 reserved1;
+ u8 mem_type; /* memory type */
+ u8 mem_usage; /* memory usage */
+ u64 addr; /* physical address of memory */
+ u32 length; /* length (multiple of 4KB pages) */
+ u32 reserved2;
+ u8 oem_reserved[8];
+} ia64_sal_desc_memory_t;
+
+typedef struct ia64_sal_desc_platform_feature {
+ u8 type;
+ u8 feature_mask;
+ u8 reserved1[14];
+} ia64_sal_desc_platform_feature_t;
+
+typedef struct ia64_sal_desc_tr {
+ u8 type;
+ u8 tr_type; /* 0 == instruction, 1 == data */
+ u8 regnum; /* translation register number */
+ u8 reserved1[5];
+ u64 addr; /* virtual address of area covered */
+ u64 page_size; /* encoded page size */
+ u8 reserved2[8];
+} ia64_sal_desc_tr_t;
+
+typedef struct ia64_sal_desc_ptc {
+ u8 type;
+ u8 reserved1[3];
+ u32 num_domains; /* # of coherence domains */
+ u64 domain_info; /* physical address of domain info table */
+} ia64_sal_desc_ptc_t;
+
+typedef struct ia64_sal_ptc_domain_info {
+ u64 proc_count; /* number of processors in domain */
+ u64 proc_list; /* physical address of LID array */
+} ia64_sal_ptc_domain_info_t;
+
+typedef struct ia64_sal_ptc_domain_proc_entry {
+ u64 id : 8; /* id of processor */
+ u64 eid : 8; /* eid of processor */
+} ia64_sal_ptc_domain_proc_entry_t;
+
+
+#define IA64_SAL_AP_EXTERNAL_INT 0
+
+typedef struct ia64_sal_desc_ap_wakeup {
+ u8 type;
+ u8 mechanism; /* 0 == external interrupt */
+ u8 reserved1[6];
+ u64 vector; /* interrupt vector in range 0x10-0xff */
+} ia64_sal_desc_ap_wakeup_t ;
+
+extern ia64_sal_handler ia64_sal;
+extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
+
+extern unsigned short sal_revision; /* supported SAL spec revision */
+extern unsigned short sal_version; /* SAL version; OEM dependent */
+#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
+
+extern const char *ia64_sal_strerror (long status);
+extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
+
+/* SAL information type encodings */
+enum {
+ SAL_INFO_TYPE_MCA = 0, /* Machine check abort information */
+ SAL_INFO_TYPE_INIT = 1, /* Init information */
+ SAL_INFO_TYPE_CMC = 2, /* Corrected machine check information */
+ SAL_INFO_TYPE_CPE = 3 /* Corrected platform error information */
+};
+
+/* Encodings for machine check parameter types */
+enum {
+ SAL_MC_PARAM_RENDEZ_INT = 1, /* Rendezvous interrupt */
+ SAL_MC_PARAM_RENDEZ_WAKEUP = 2, /* Wakeup */
+ SAL_MC_PARAM_CPE_INT = 3 /* Corrected Platform Error Int */
+};
+
+/* Encodings for rendezvous mechanisms */
+enum {
+ SAL_MC_PARAM_MECHANISM_INT = 1, /* Use interrupt */
+ SAL_MC_PARAM_MECHANISM_MEM = 2 /* Use memory synchronization variable*/
+};
+
+/* Encodings for vectors which can be registered by the OS with SAL */
+enum {
+ SAL_VECTOR_OS_MCA = 0,
+ SAL_VECTOR_OS_INIT = 1,
+ SAL_VECTOR_OS_BOOT_RENDEZ = 2
+};
+
+/* Encodings for mca_opt parameter sent to SAL_MC_SET_PARAMS */
+#define SAL_MC_PARAM_RZ_ALWAYS 0x1
+#define SAL_MC_PARAM_BINIT_ESCALATE 0x10
+
+/*
+ * Definition of the SAL Error Log from the SAL spec
+ */
+
+/* SAL Error Record Section GUID Definitions */
+#define SAL_PROC_DEV_ERR_SECT_GUID \
+ EFI_GUID(0xe429faf1, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_MEM_DEV_ERR_SECT_GUID \
+ EFI_GUID(0xe429faf2, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SEL_DEV_ERR_SECT_GUID \
+ EFI_GUID(0xe429faf3, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_BUS_ERR_SECT_GUID \
+ EFI_GUID(0xe429faf4, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID \
+ EFI_GUID(0xe429faf5, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_COMP_ERR_SECT_GUID \
+ EFI_GUID(0xe429faf6, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SPECIFIC_ERR_SECT_GUID \
+ EFI_GUID(0xe429faf7, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_HOST_CTLR_ERR_SECT_GUID \
+ EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_BUS_ERR_SECT_GUID \
+ EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+
+#define MAX_CACHE_ERRORS 6
+#define MAX_TLB_ERRORS 6
+#define MAX_BUS_ERRORS 1
+
+/* Definition of version according to SAL spec for logging purposes */
+typedef struct sal_log_revision {
+ u8 minor; /* BCD (0..99) */
+ u8 major; /* BCD (0..99) */
+} sal_log_revision_t;
+
+/* Definition of timestamp according to SAL spec for logging purposes */
+typedef struct sal_log_timestamp {
+ u8 slh_second; /* Second (0..59) */
+ u8 slh_minute; /* Minute (0..59) */
+ u8 slh_hour; /* Hour (0..23) */
+ u8 slh_reserved;
+ u8 slh_day; /* Day (1..31) */
+ u8 slh_month; /* Month (1..12) */
+ u8 slh_year; /* Year (00..99) */
+ u8 slh_century; /* Century (19, 20, 21, ...) */
+} sal_log_timestamp_t;
+
+/* Definition of log record header structures */
+typedef struct sal_log_record_header {
+ u64 id; /* Unique monotonically increasing ID */
+ sal_log_revision_t revision; /* Major and Minor revision of header */
+ u16 severity; /* Error Severity */
+ u32 len; /* Length of this error log in bytes */
+ sal_log_timestamp_t timestamp; /* Timestamp */
+ efi_guid_t platform_guid; /* Unique OEM Platform ID */
+} sal_log_record_header_t;
+
+#define sal_log_severity_recoverable 0
+#define sal_log_severity_fatal 1
+#define sal_log_severity_corrected 2
+
+/* Definition of log section header structures */
+typedef struct sal_log_sec_header {
+ efi_guid_t guid; /* Unique Section ID */
+ sal_log_revision_t revision; /* Major and Minor revision of Section */
+ u16 reserved;
+ u32 len; /* Section length */
+} sal_log_section_hdr_t;
+
+typedef struct sal_log_mod_error_info {
+ struct {
+ u64 check_info : 1,
+ requestor_identifier : 1,
+ responder_identifier : 1,
+ target_identifier : 1,
+ precise_ip : 1,
+ reserved : 59;
+ } valid;
+ u64 check_info;
+ u64 requestor_identifier;
+ u64 responder_identifier;
+ u64 target_identifier;
+ u64 precise_ip;
+} sal_log_mod_error_info_t;
+
+typedef struct sal_processor_static_info {
+ struct {
+ u64 minstate : 1,
+ br : 1,
+ cr : 1,
+ ar : 1,
+ rr : 1,
+ fr : 1,
+ reserved : 58;
+ } valid;
+ pal_min_state_area_t min_state_area;
+ u64 br[8];
+ u64 cr[128];
+ u64 ar[128];
+ u64 rr[8];
+ struct ia64_fpreg __attribute__ ((packed)) fr[128];
+} sal_processor_static_info_t;
+
+struct sal_cpuid_info {
+ u64 regs[5];
+ u64 reserved;
+};
+
+typedef struct sal_log_processor_info {
+ sal_log_section_hdr_t header;
+ struct {
+ u64 proc_error_map : 1,
+ proc_state_param : 1,
+ proc_cr_lid : 1,
+ psi_static_struct : 1,
+ num_cache_check : 4,
+ num_tlb_check : 4,
+ num_bus_check : 4,
+ num_reg_file_check : 4,
+ num_ms_check : 4,
+ cpuid_info : 1,
+ reserved1 : 39;
+ } valid;
+ u64 proc_error_map;
+ u64 proc_state_parameter;
+ u64 proc_cr_lid;
+ /*
+ * The rest of this structure consists of variable-length arrays, which can't be
+ * expressed in C.
+ */
+ sal_log_mod_error_info_t info[0];
+ /*
+ * This is what the rest looked like if C supported variable-length arrays:
+ *
+ * sal_log_mod_error_info_t cache_check_info[.valid.num_cache_check];
+ * sal_log_mod_error_info_t tlb_check_info[.valid.num_tlb_check];
+ * sal_log_mod_error_info_t bus_check_info[.valid.num_bus_check];
+ * sal_log_mod_error_info_t reg_file_check_info[.valid.num_reg_file_check];
+ * sal_log_mod_error_info_t ms_check_info[.valid.num_ms_check];
+ * struct sal_cpuid_info cpuid_info;
+ * sal_processor_static_info_t processor_static_info;
+ */
+} sal_log_processor_info_t;
+
+/* Given a sal_log_processor_info_t pointer, return a pointer to the processor_static_info: */
+#define SAL_LPI_PSI_INFO(l) \
+({ sal_log_processor_info_t *_l = (l); \
+ ((sal_processor_static_info_t *) \
+ ((char *) _l->info + ((_l->valid.num_cache_check + _l->valid.num_tlb_check \
+ + _l->valid.num_bus_check + _l->valid.num_reg_file_check \
+ + _l->valid.num_ms_check) * sizeof(sal_log_mod_error_info_t) \
+ + sizeof(struct sal_cpuid_info)))); \
+})
+
+/* platform error log structures */
+
+typedef struct sal_log_mem_dev_err_info {
+ sal_log_section_hdr_t header;
+ struct {
+ u64 error_status : 1,
+ physical_addr : 1,
+ addr_mask : 1,
+ node : 1,
+ card : 1,
+ module : 1,
+ bank : 1,
+ device : 1,
+ row : 1,
+ column : 1,
+ bit_position : 1,
+ requestor_id : 1,
+ responder_id : 1,
+ target_id : 1,
+ bus_spec_data : 1,
+ oem_id : 1,
+ oem_data : 1,
+ reserved : 47;
+ } valid;
+ u64 error_status;
+ u64 physical_addr;
+ u64 addr_mask;
+ u16 node;
+ u16 card;
+ u16 module;
+ u16 bank;
+ u16 device;
+ u16 row;
+ u16 column;
+ u16 bit_position;
+ u64 requestor_id;
+ u64 responder_id;
+ u64 target_id;
+ u64 bus_spec_data;
+ u8 oem_id[16];
+ u8 oem_data[1]; /* Variable length data */
+} sal_log_mem_dev_err_info_t;
+
+typedef struct sal_log_sel_dev_err_info {
+ sal_log_section_hdr_t header;
+ struct {
+ u64 record_id : 1,
+ record_type : 1,
+ generator_id : 1,
+ evm_rev : 1,
+ sensor_type : 1,
+ sensor_num : 1,
+ event_dir : 1,
+ event_data1 : 1,
+ event_data2 : 1,
+ event_data3 : 1,
+ reserved : 54;
+ } valid;
+ u16 record_id;
+ u8 record_type;
+ u8 timestamp[4];
+ u16 generator_id;
+ u8 evm_rev;
+ u8 sensor_type;
+ u8 sensor_num;
+ u8 event_dir;
+ u8 event_data1;
+ u8 event_data2;
+ u8 event_data3;
+} sal_log_sel_dev_err_info_t;
+
+typedef struct sal_log_pci_bus_err_info {
+ sal_log_section_hdr_t header;
+ struct {
+ u64 err_status : 1,
+ err_type : 1,
+ bus_id : 1,
+ bus_address : 1,
+ bus_data : 1,
+ bus_cmd : 1,
+ requestor_id : 1,
+ responder_id : 1,
+ target_id : 1,
+ oem_data : 1,
+ reserved : 54;
+ } valid;
+ u64 err_status;
+ u16 err_type;
+ u16 bus_id;
+ u32 reserved;
+ u64 bus_address;
+ u64 bus_data;
+ u64 bus_cmd;
+ u64 requestor_id;
+ u64 responder_id;
+ u64 target_id;
+ u8 oem_data[1]; /* Variable length data */
+} sal_log_pci_bus_err_info_t;
+
+typedef struct sal_log_smbios_dev_err_info {
+ sal_log_section_hdr_t header;
+ struct {
+ u64 event_type : 1,
+ length : 1,
+ time_stamp : 1,
+ data : 1,
+ reserved1 : 60;
+ } valid;
+ u8 event_type;
+ u8 length;
+ u8 time_stamp[6];
+ u8 data[1]; /* data of variable length, length == slsmb_length */
+} sal_log_smbios_dev_err_info_t;
+
+typedef struct sal_log_pci_comp_err_info {
+ sal_log_section_hdr_t header;
+ struct {
+ u64 err_status : 1,
+ comp_info : 1,
+ num_mem_regs : 1,
+ num_io_regs : 1,
+ reg_data_pairs : 1,
+ oem_data : 1,
+ reserved : 58;
+ } valid;
+ u64 err_status;
+ struct {
+ u16 vendor_id;
+ u16 device_id;
+ u8 class_code[3];
+ u8 func_num;
+ u8 dev_num;
+ u8 bus_num;
+ u8 seg_num;
+ u8 reserved[5];
+ } comp_info;
+ u32 num_mem_regs;
+ u32 num_io_regs;
+ u64 reg_data_pairs[1];
+ /*
+ * array of address/data register pairs is num_mem_regs + num_io_regs elements
+ * long. Each array element consists of a u64 address followed by a u64 data
+ * value. The oem_data array immediately follows the reg_data_pairs array
+ */
+ u8 oem_data[1]; /* Variable length data */
+} sal_log_pci_comp_err_info_t;
+
+typedef struct sal_log_plat_specific_err_info {
+ sal_log_section_hdr_t header;
+ struct {
+ u64 err_status : 1,
+ guid : 1,
+ oem_data : 1,
+ reserved : 61;
+ } valid;
+ u64 err_status;
+ efi_guid_t guid;
+ u8 oem_data[1]; /* platform specific variable length data */
+} sal_log_plat_specific_err_info_t;
+
+typedef struct sal_log_host_ctlr_err_info {
+ sal_log_section_hdr_t header;
+ struct {
+ u64 err_status : 1,
+ requestor_id : 1,
+ responder_id : 1,
+ target_id : 1,
+ bus_spec_data : 1,
+ oem_data : 1,
+ reserved : 58;
+ } valid;
+ u64 err_status;
+ u64 requestor_id;
+ u64 responder_id;
+ u64 target_id;
+ u64 bus_spec_data;
+ u8 oem_data[1]; /* Variable length OEM data */
+} sal_log_host_ctlr_err_info_t;
+
+typedef struct sal_log_plat_bus_err_info {
+ sal_log_section_hdr_t header;
+ struct {
+ u64 err_status : 1,
+ requestor_id : 1,
+ responder_id : 1,
+ target_id : 1,
+ bus_spec_data : 1,
+ oem_data : 1,
+ reserved : 58;
+ } valid;
+ u64 err_status;
+ u64 requestor_id;
+ u64 responder_id;
+ u64 target_id;
+ u64 bus_spec_data;
+ u8 oem_data[1]; /* Variable length OEM data */
+} sal_log_plat_bus_err_info_t;
+
+/* Overall platform error section structure */
+typedef union sal_log_platform_err_info {
+ sal_log_mem_dev_err_info_t mem_dev_err;
+ sal_log_sel_dev_err_info_t sel_dev_err;
+ sal_log_pci_bus_err_info_t pci_bus_err;
+ sal_log_smbios_dev_err_info_t smbios_dev_err;
+ sal_log_pci_comp_err_info_t pci_comp_err;
+ sal_log_plat_specific_err_info_t plat_specific_err;
+ sal_log_host_ctlr_err_info_t host_ctlr_err;
+ sal_log_plat_bus_err_info_t plat_bus_err;
+} sal_log_platform_err_info_t;
+
+/* SAL log over-all, multi-section error record structure (processor+platform) */
+typedef struct err_rec {
+ sal_log_record_header_t sal_elog_header;
+ sal_log_processor_info_t proc_err;
+ sal_log_platform_err_info_t plat_err;
+ u8 oem_data_pad[1024];
+} ia64_err_rec_t;
+
+/*
+ * Now define a couple of inline functions for improved type checking
+ * and convenience.
+ */
+static inline long
+ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
+ unsigned long *drift_info)
+{
+ struct ia64_sal_retval isrv;
+
+ SAL_CALL(isrv, SAL_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
+ *ticks_per_second = isrv.v0;
+ *drift_info = isrv.v1;
+ return isrv.status;
+}
+
+/* Flush all the processor and platform level instruction and/or data caches */
+static inline s64
+ia64_sal_cache_flush (u64 cache_type)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
+ return isrv.status;
+}
+
+
+/* Initialize all the processor and platform level instruction and data caches */
+static inline s64
+ia64_sal_cache_init (void)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SAL_CACHE_INIT, 0, 0, 0, 0, 0, 0, 0);
+ return isrv.status;
+}
+
+/*
+ * Clear the processor and platform information logged by SAL with respect to the machine
+ * state at the time of MCA's, INITs, CMCs, or CPEs.
+ */
+static inline s64
+ia64_sal_clear_state_info (u64 sal_info_type)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL_REENTRANT(isrv, SAL_CLEAR_STATE_INFO, sal_info_type, 0,
+ 0, 0, 0, 0, 0);
+ return isrv.status;
+}
+
+
+/* Get the processor and platform information logged by SAL with respect to the machine
+ * state at the time of the MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info (u64 sal_info_type, u64 *sal_info)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO, sal_info_type, 0,
+ sal_info, 0, 0, 0, 0);
+ if (isrv.status)
+ return 0;
+
+ return isrv.v0;
+}
+
+/*
+ * Get the maximum size of the information logged by SAL with respect to the machine state
+ * at the time of MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info_size (u64 sal_info_type)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO_SIZE, sal_info_type, 0,
+ 0, 0, 0, 0, 0);
+ if (isrv.status)
+ return 0;
+ return isrv.v0;
+}
+
+/*
+ * Causes the processor to go into a spin loop within SAL where SAL awaits a wakeup from
+ * the monarch processor. Must not lock, because it will not return on any cpu until the
+ * monarch processor sends a wake up.
+ */
+static inline s64
+ia64_sal_mc_rendez (void)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL_NOLOCK(isrv, SAL_MC_RENDEZ, 0, 0, 0, 0, 0, 0, 0);
+ return isrv.status;
+}
+
+/*
+ * Allow the OS to specify the interrupt number to be used by SAL to interrupt OS during
+ * the machine check rendezvous sequence as well as the mechanism to wake up the
+ * non-monarch processor at the end of machine check processing.
+ * Returns the complete ia64_sal_retval because some calls return more than just a status
+ * value.
+ */
+static inline struct ia64_sal_retval
+ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout, u64 rz_always)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SAL_MC_SET_PARAMS, param_type, i_or_m, i_or_m_val,
+ timeout, rz_always, 0, 0);
+ return isrv;
+}
+
+/* Read from PCI configuration space */
+static inline s64
+ia64_sal_pci_config_read (u64 pci_config_addr, int type, u64 size, u64 *value)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, type, 0, 0, 0, 0);
+ if (value)
+ *value = isrv.v0;
+ return isrv.status;
+}
+
+/* Write to PCI configuration space */
+static inline s64
+ia64_sal_pci_config_write (u64 pci_config_addr, int type, u64 size, u64 value)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value,
+ type, 0, 0, 0);
+ return isrv.status;
+}
+
+/*
+ * Register physical addresses of locations needed by SAL when SAL procedures are invoked
+ * in virtual mode.
+ */
+static inline s64
+ia64_sal_register_physical_addr (u64 phys_entry, u64 phys_addr)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SAL_REGISTER_PHYSICAL_ADDR, phys_entry, phys_addr,
+ 0, 0, 0, 0, 0);
+ return isrv.status;
+}
+
+/*
+ * Register software dependent code locations within SAL. These locations are handlers or
+ * entry points where SAL will pass control for the specified event. These event handlers
+ * are for the bott rendezvous, MCAs and INIT scenarios.
+ */
+static inline s64
+ia64_sal_set_vectors (u64 vector_type,
+ u64 handler_addr1, u64 gp1, u64 handler_len1,
+ u64 handler_addr2, u64 gp2, u64 handler_len2)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SAL_SET_VECTORS, vector_type,
+ handler_addr1, gp1, handler_len1,
+ handler_addr2, gp2, handler_len2);
+
+ return isrv.status;
+}
+
+/* Update the contents of PAL block in the non-volatile storage device */
+static inline s64
+ia64_sal_update_pal (u64 param_buf, u64 scratch_buf, u64 scratch_buf_size,
+ u64 *error_code, u64 *scratch_buf_size_needed)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SAL_UPDATE_PAL, param_buf, scratch_buf, scratch_buf_size,
+ 0, 0, 0, 0);
+ if (error_code)
+ *error_code = isrv.v0;
+ if (scratch_buf_size_needed)
+ *scratch_buf_size_needed = isrv.v1;
+ return isrv.status;
+}
+
+extern unsigned long sal_platform_features;
+
+extern int (*salinfo_platform_oemdata)(const u8 *, u8 **, u64 *);
+
+struct sal_ret_values {
+ long r8; long r9; long r10; long r11;
+};
+
+#define IA64_SAL_OEMFUNC_MIN 0x02000000
+#define IA64_SAL_OEMFUNC_MAX 0x03ffffff
+
+extern int ia64_sal_oemcall(struct ia64_sal_retval *, u64, u64, u64, u64, u64,
+ u64, u64, u64);
+extern int ia64_sal_oemcall_nolock(struct ia64_sal_retval *, u64, u64, u64,
+ u64, u64, u64, u64, u64);
+extern int ia64_sal_oemcall_reentrant(struct ia64_sal_retval *, u64, u64, u64,
+ u64, u64, u64, u64, u64);
+
+extern void ia64_sal_handler_init(void *entry_point, void *gpval);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SAL_H */
diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h
new file mode 100644
index 0000000..834a189
--- /dev/null
+++ b/include/asm-ia64/scatterlist.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IA64_SCATTERLIST_H
+#define _ASM_IA64_SCATTERLIST_H
+
+/*
+ * Modified 1998-1999, 2001-2002, 2004
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+ unsigned int length; /* buffer length */
+
+ dma_addr_t dma_address;
+ unsigned int dma_length;
+};
+
+/*
+ * It used to be that ISA_DMA_THRESHOLD had something to do with the
+ * DMA-limits of ISA-devices. Nowadays, its only remaining use (apart
+ * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
+ * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical
+ * address of a page is that is allocated with GFP_DMA. On IA-64,
+ * that's 4GB - 1.
+ */
+#define ISA_DMA_THRESHOLD 0xffffffff
+
+#endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h
new file mode 100644
index 0000000..8e3dbde
--- /dev/null
+++ b/include/asm-ia64/sections.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_SECTIONS_H
+#define _ASM_IA64_SECTIONS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm-generic/sections.h>
+
+extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
+extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
+extern char __start_gate_section[];
+extern char __start_gate_mckinley_e9_patchlist[], __end_gate_mckinley_e9_patchlist[];
+extern char __start_gate_vtop_patchlist[], __end_gate_vtop_patchlist[];
+extern char __start_gate_fsyscall_patchlist[], __end_gate_fsyscall_patchlist[];
+extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_bubble_down_patchlist[];
+extern char __start_unwind[], __end_unwind[];
+
+#endif /* _ASM_IA64_SECTIONS_H */
+
diff --git a/include/asm-ia64/segment.h b/include/asm-ia64/segment.h
new file mode 100644
index 0000000..b89e2b3
--- /dev/null
+++ b/include/asm-ia64/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_IA64_SEGMENT_H
+#define _ASM_IA64_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_IA64_SEGMENT_H */
diff --git a/include/asm-ia64/semaphore.h b/include/asm-ia64/semaphore.h
new file mode 100644
index 0000000..3a2f0f3
--- /dev/null
+++ b/include/asm-ia64/semaphore.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_IA64_SEMAPHORE_H
+#define _ASM_IA64_SEMAPHORE_H
+
+/*
+ * Copyright (C) 1998-2000 Hewlett-Packard Co
+ * Copyright (C) 1998-2000 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/atomic.h>
+
+struct semaphore {
+ atomic_t count;
+ int sleepers;
+ wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n) \
+{ \
+ .count = ATOMIC_INIT(n), \
+ .sleepers = 0, \
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
+}
+
+#define __MUTEX_INITIALIZER(name) __SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void
+sema_init (struct semaphore *sem, int val)
+{
+ *sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void
+init_MUTEX (struct semaphore *sem)
+{
+ sema_init(sem, 1);
+}
+
+static inline void
+init_MUTEX_LOCKED (struct semaphore *sem)
+{
+ sema_init(sem, 0);
+}
+
+extern void __down (struct semaphore * sem);
+extern int __down_interruptible (struct semaphore * sem);
+extern int __down_trylock (struct semaphore * sem);
+extern void __up (struct semaphore * sem);
+
+/*
+ * Atomically decrement the semaphore's count. If it goes negative,
+ * block the calling thread in the TASK_UNINTERRUPTIBLE state.
+ */
+static inline void
+down (struct semaphore *sem)
+{
+ might_sleep();
+ if (atomic_dec_return(&sem->count) < 0)
+ __down(sem);
+}
+
+/*
+ * Atomically decrement the semaphore's count. If it goes negative,
+ * block the calling thread in the TASK_INTERRUPTIBLE state.
+ */
+static inline int
+down_interruptible (struct semaphore * sem)
+{
+ int ret = 0;
+
+ might_sleep();
+ if (atomic_dec_return(&sem->count) < 0)
+ ret = __down_interruptible(sem);
+ return ret;
+}
+
+static inline int
+down_trylock (struct semaphore *sem)
+{
+ int ret = 0;
+
+ if (atomic_dec_return(&sem->count) < 0)
+ ret = __down_trylock(sem);
+ return ret;
+}
+
+static inline void
+up (struct semaphore * sem)
+{
+ if (atomic_inc_return(&sem->count) <= 0)
+ __up(sem);
+}
+
+#endif /* _ASM_IA64_SEMAPHORE_H */
diff --git a/include/asm-ia64/sembuf.h b/include/asm-ia64/sembuf.h
new file mode 100644
index 0000000..1340fbc
--- /dev/null
+++ b/include/asm-ia64/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_SEMBUF_H
+#define _ASM_IA64_SEMBUF_H
+
+/*
+ * The semid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_IA64_SEMBUF_H */
diff --git a/include/asm-ia64/serial.h b/include/asm-ia64/serial.h
new file mode 100644
index 0000000..0c7a2f3
--- /dev/null
+++ b/include/asm-ia64/serial.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-ia64/serial.h
+ *
+ * Derived from the i386 version.
+ */
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/*
+ * All legacy serial ports should be enumerated via ACPI namespace, so
+ * we need not list them here.
+ */
diff --git a/include/asm-ia64/setup.h b/include/asm-ia64/setup.h
new file mode 100644
index 0000000..ea29b57
--- /dev/null
+++ b/include/asm-ia64/setup.h
@@ -0,0 +1,6 @@
+#ifndef __IA64_SETUP_H
+#define __IA64_SETUP_H
+
+#define COMMAND_LINE_SIZE 512
+
+#endif
diff --git a/include/asm-ia64/shmbuf.h b/include/asm-ia64/shmbuf.h
new file mode 100644
index 0000000..585002a
--- /dev/null
+++ b/include/asm-ia64/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_SHMBUF_H
+#define _ASM_IA64_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ __kernel_time_t shm_dtime; /* last detach time */
+ __kernel_time_t shm_ctime; /* last change time */
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_IA64_SHMBUF_H */
diff --git a/include/asm-ia64/shmparam.h b/include/asm-ia64/shmparam.h
new file mode 100644
index 0000000..d07508d
--- /dev/null
+++ b/include/asm-ia64/shmparam.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_SHMPARAM_H
+#define _ASM_IA64_SHMPARAM_H
+
+/*
+ * SHMLBA controls minimum alignment at which shared memory segments
+ * get attached. The IA-64 architecture says that there may be a
+ * performance degradation when there are virtual aliases within 1MB.
+ * To reduce the chance of this, we set SHMLBA to 1MB. --davidm 00/12/20
+ */
+#define SHMLBA (1024*1024)
+
+#endif /* _ASM_IA64_SHMPARAM_H */
diff --git a/include/asm-ia64/sigcontext.h b/include/asm-ia64/sigcontext.h
new file mode 100644
index 0000000..57ff777
--- /dev/null
+++ b/include/asm-ia64/sigcontext.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_IA64_SIGCONTEXT_H
+#define _ASM_IA64_SIGCONTEXT_H
+
+/*
+ * Copyright (C) 1998, 1999, 2001 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999, 2001 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/fpu.h>
+
+#define IA64_SC_FLAG_ONSTACK_BIT 0 /* is handler running on signal stack? */
+#define IA64_SC_FLAG_IN_SYSCALL_BIT 1 /* did signal interrupt a syscall? */
+#define IA64_SC_FLAG_FPH_VALID_BIT 2 /* is state in f[32]-f[127] valid? */
+
+#define IA64_SC_FLAG_ONSTACK (1 << IA64_SC_FLAG_ONSTACK_BIT)
+#define IA64_SC_FLAG_IN_SYSCALL (1 << IA64_SC_FLAG_IN_SYSCALL_BIT)
+#define IA64_SC_FLAG_FPH_VALID (1 << IA64_SC_FLAG_FPH_VALID_BIT)
+
+# ifndef __ASSEMBLY__
+
+/*
+ * Note on handling of register backing store: sc_ar_bsp contains the address that would
+ * be found in ar.bsp after executing a "cover" instruction the context in which the
+ * signal was raised. If signal delivery required switching to an alternate signal stack
+ * (sc_rbs_base is not NULL), the "dirty" partition (as it would exist after executing the
+ * imaginary "cover" instruction) is backed by the *alternate* signal stack, not the
+ * original one. In this case, sc_rbs_base contains the base address of the new register
+ * backing store. The number of registers in the dirty partition can be calculated as:
+ *
+ * ndirty = ia64_rse_num_regs(sc_rbs_base, sc_rbs_base + (sc_loadrs >> 16))
+ *
+ */
+
+struct sigcontext {
+ unsigned long sc_flags; /* see manifest constants above */
+ unsigned long sc_nat; /* bit i == 1 iff scratch reg gr[i] is a NaT */
+ stack_t sc_stack; /* previously active stack */
+
+ unsigned long sc_ip; /* instruction pointer */
+ unsigned long sc_cfm; /* current frame marker */
+ unsigned long sc_um; /* user mask bits */
+ unsigned long sc_ar_rsc; /* register stack configuration register */
+ unsigned long sc_ar_bsp; /* backing store pointer */
+ unsigned long sc_ar_rnat; /* RSE NaT collection register */
+ unsigned long sc_ar_ccv; /* compare and exchange compare value register */
+ unsigned long sc_ar_unat; /* ar.unat of interrupted context */
+ unsigned long sc_ar_fpsr; /* floating-point status register */
+ unsigned long sc_ar_pfs; /* previous function state */
+ unsigned long sc_ar_lc; /* loop count register */
+ unsigned long sc_pr; /* predicate registers */
+ unsigned long sc_br[8]; /* branch registers */
+ /* Note: sc_gr[0] is used as the "uc_link" member of ucontext_t */
+ unsigned long sc_gr[32]; /* general registers (static partition) */
+ struct ia64_fpreg sc_fr[128]; /* floating-point registers */
+
+ unsigned long sc_rbs_base; /* NULL or new base of sighandler's rbs */
+ unsigned long sc_loadrs; /* see description above */
+
+ unsigned long sc_ar25; /* cmp8xchg16 uses this */
+ unsigned long sc_ar26; /* rsvd for scratch use */
+ unsigned long sc_rsvd[12]; /* reserved for future use */
+ /*
+ * The mask must come last so we can increase _NSIG_WORDS
+ * without breaking binary compatibility.
+ */
+ sigset_t sc_mask; /* signal mask to restore after handler returns */
+};
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGCONTEXT_H */
diff --git a/include/asm-ia64/siginfo.h b/include/asm-ia64/siginfo.h
new file mode 100644
index 0000000..d55f139
--- /dev/null
+++ b/include/asm-ia64/siginfo.h
@@ -0,0 +1,141 @@
+#ifndef _ASM_IA64_SIGINFO_H
+#define _ASM_IA64_SIGINFO_H
+
+/*
+ * Based on <asm-i386/siginfo.h>.
+ *
+ * Modified 1998-2002
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 4)
+
+#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
+
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+ int si_signo;
+ int si_errno;
+ int si_code;
+ int __pad0;
+
+ union {
+ int _pad[SI_PAD_SIZE];
+
+ /* kill() */
+ struct {
+ pid_t _pid; /* sender's pid */
+ uid_t _uid; /* sender's uid */
+ } _kill;
+
+ /* POSIX.1b timers */
+ struct {
+ timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)];
+ sigval_t _sigval; /* must overlay ._rt._sigval! */
+ int _sys_private; /* not to be passed to user */
+ } _timer;
+
+ /* POSIX.1b signals */
+ struct {
+ pid_t _pid; /* sender's pid */
+ uid_t _uid; /* sender's uid */
+ sigval_t _sigval;
+ } _rt;
+
+ /* SIGCHLD */
+ struct {
+ pid_t _pid; /* which child */
+ uid_t _uid; /* sender's uid */
+ int _status; /* exit code */
+ clock_t _utime;
+ clock_t _stime;
+ } _sigchld;
+
+ /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+ struct {
+ void __user *_addr; /* faulting insn/memory ref. */
+ int _imm; /* immediate value for "break" */
+ unsigned int _flags; /* see below */
+ unsigned long _isr; /* isr */
+ } _sigfault;
+
+ /* SIGPOLL */
+ struct {
+ long _band; /* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */
+ int _fd;
+ } _sigpoll;
+ } _sifields;
+} siginfo_t;
+
+#define si_imm _sifields._sigfault._imm /* as per UNIX SysV ABI spec */
+#define si_flags _sifields._sigfault._flags
+/*
+ * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that
+ * si_code is non-zero and __ISR_VALID is set in si_flags.
+ */
+#define si_isr _sifields._sigfault._isr
+
+/*
+ * Flag values for si_flags:
+ */
+#define __ISR_VALID_BIT 0
+#define __ISR_VALID (1 << __ISR_VALID_BIT)
+
+/*
+ * SIGILL si_codes
+ */
+#define ILL_BADIADDR (__SI_FAULT|9) /* unimplemented instruction address */
+#define __ILL_BREAK (__SI_FAULT|10) /* illegal break */
+#define __ILL_BNDMOD (__SI_FAULT|11) /* bundle-update (modification) in progress */
+#undef NSIGILL
+#define NSIGILL 11
+
+/*
+ * SIGFPE si_codes
+ */
+#define __FPE_DECOVF (__SI_FAULT|9) /* decimal overflow */
+#define __FPE_DECDIV (__SI_FAULT|10) /* decimal division by zero */
+#define __FPE_DECERR (__SI_FAULT|11) /* packed decimal error */
+#define __FPE_INVASC (__SI_FAULT|12) /* invalid ASCII digit */
+#define __FPE_INVDEC (__SI_FAULT|13) /* invalid decimal digit */
+#undef NSIGFPE
+#define NSIGFPE 13
+
+/*
+ * SIGSEGV si_codes
+ */
+#define __SEGV_PSTKOVF (__SI_FAULT|3) /* paragraph stack overflow */
+#undef NSIGSEGV
+#define NSIGSEGV 3
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
+#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */
+#undef NSIGTRAP
+#define NSIGTRAP 4
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+
+static inline void
+copy_siginfo (siginfo_t *to, siginfo_t *from)
+{
+ if (from->si_code < 0)
+ memcpy(to, from, sizeof(siginfo_t));
+ else
+ /* _sigchld is currently the largest know union member */
+ memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SIGINFO_H */
diff --git a/include/asm-ia64/signal.h b/include/asm-ia64/signal.h
new file mode 100644
index 0000000..660a759
--- /dev/null
+++ b/include/asm-ia64/signal.h
@@ -0,0 +1,185 @@
+#ifndef _ASM_IA64_SIGNAL_H
+#define _ASM_IA64_SIGNAL_H
+
+/*
+ * Modified 1998-2001, 2003
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * Unfortunately, this file is being included by bits/signal.h in
+ * glibc-2.x. Hence the #ifdef __KERNEL__ ugliness.
+ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+/*
+ * The minimum stack size needs to be fairly large because we want to
+ * be sure that an app compiled for today's CPUs will continue to run
+ * on all future CPU models. The CPU model matters because the signal
+ * frame needs to have space for the complete machine state, including
+ * all physical stacked registers. The number of physical stacked
+ * registers is CPU model dependent, but given that the width of
+ * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up
+ * more than 16KB of space.
+ */
+#if 1
+ /*
+ * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it
+ * in wrong. ;-( To preserve backwards compatibility, we leave the kernel at the
+ * incorrect value and fix libc only.
+ */
+# define MINSIGSTKSZ 131027 /* min. stack size for sigaltstack() */
+#else
+# define MINSIGSTKSZ 131072 /* min. stack size for sigaltstack() */
+#endif
+#define SIGSTKSZ 262144 /* default stack size for sigaltstack() */
+
+#ifdef __KERNEL__
+
+#define _NSIG 64
+#define _NSIG_BPW 64
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE SA_ONESHOT
+#define SA_SAMPLE_RANDOM SA_RESTART
+#define SA_SHIRQ 0x04000000
+#define SA_PERCPU_IRQ 0x02000000
+
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK 0 /* for blocking signals */
+#define SIG_UNBLOCK 1 /* for unblocking signals */
+#define SIG_SETMASK 2 /* for setting the signal mask */
+
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+
+# ifndef __ASSEMBLY__
+
+# include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+/* Type of a signal handler. */
+typedef void __user (*__sighandler_t)(int);
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+typedef unsigned long old_sigset_t;
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+
+# include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+void set_sigdelayed(pid_t pid, int signo, int code, void __user *addr);
+
+#endif /* __KERNEL__ */
+
+# endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGNAL_H */
diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h
new file mode 100644
index 0000000..c4a227a
--- /dev/null
+++ b/include/asm-ia64/smp.h
@@ -0,0 +1,134 @@
+/*
+ * SMP Support
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * (c) Copyright 2001-2003, 2005 Hewlett-Packard Development Company, L.P.
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
+ */
+#ifndef _ASM_IA64_SMP_H
+#define _ASM_IA64_SMP_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/param.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+static inline unsigned int
+ia64_get_lid (void)
+{
+ union {
+ struct {
+ unsigned long reserved : 16;
+ unsigned long eid : 8;
+ unsigned long id : 8;
+ unsigned long ignored : 32;
+ } f;
+ unsigned long bits;
+ } lid;
+
+ lid.bits = ia64_getreg(_IA64_REG_CR_LID);
+ return lid.f.id << 8 | lid.f.eid;
+}
+
+#ifdef CONFIG_SMP
+
+#define XTP_OFFSET 0x1e0008
+
+#define SMP_IRQ_REDIRECTION (1 << 0)
+#define SMP_IPI_REDIRECTION (1 << 1)
+
+#define smp_processor_id() (current_thread_info()->cpu)
+
+extern struct smp_boot_data {
+ int cpu_count;
+ int cpu_phys_id[NR_CPUS];
+} smp_boot_data __initdata;
+
+extern char no_int_routing __devinitdata;
+
+extern cpumask_t cpu_online_map;
+extern void __iomem *ipi_base_addr;
+extern unsigned char smp_int_redirect;
+
+extern volatile int ia64_cpu_to_sapicid[];
+#define cpu_physical_id(i) ia64_cpu_to_sapicid[i]
+
+extern unsigned long ap_wakeup_vector;
+
+/*
+ * Function to map hard smp processor id to logical id. Slow, so don't use this in
+ * performance-critical code.
+ */
+static inline int
+cpu_logical_id (int cpuid)
+{
+ int i;
+
+ for (i = 0; i < NR_CPUS; ++i)
+ if (cpu_physical_id(i) == cpuid)
+ break;
+ return i;
+}
+
+/*
+ * XTP control functions:
+ * min_xtp : route all interrupts to this CPU
+ * normal_xtp: nominal XTP value
+ * max_xtp : never deliver interrupts to this CPU.
+ */
+
+static inline void
+min_xtp (void)
+{
+ if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+ writeb(0x00, ipi_base_addr + XTP_OFFSET); /* XTP to min */
+}
+
+static inline void
+normal_xtp (void)
+{
+ if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+ writeb(0x08, ipi_base_addr + XTP_OFFSET); /* XTP normal */
+}
+
+static inline void
+max_xtp (void)
+{
+ if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+ writeb(0x0f, ipi_base_addr + XTP_OFFSET); /* Set XTP to max */
+}
+
+#define hard_smp_processor_id() ia64_get_lid()
+
+/* Upping and downing of CPUs */
+extern int __cpu_disable (void);
+extern void __cpu_die (unsigned int cpu);
+extern void cpu_die (void) __attribute__ ((noreturn));
+extern int __cpu_up (unsigned int cpu);
+extern void __init smp_build_cpu_map(void);
+
+extern void __init init_smp_config (void);
+extern void smp_do_timer (struct pt_regs *regs);
+
+extern int smp_call_function_single (int cpuid, void (*func) (void *info), void *info,
+ int retry, int wait);
+extern void smp_send_reschedule (int cpu);
+extern void lock_ipi_calllock(void);
+extern void unlock_ipi_calllock(void);
+
+#else
+
+#define cpu_logical_id(i) 0
+#define cpu_physical_id(i) ia64_get_lid()
+
+#endif /* CONFIG_SMP */
+#endif /* _ASM_IA64_SMP_H */
diff --git a/include/asm-ia64/sn/addrs.h b/include/asm-ia64/sn/addrs.h
new file mode 100644
index 0000000..c916bd2
--- /dev/null
+++ b/include/asm-ia64/sn/addrs.h
@@ -0,0 +1,238 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1992-1999,2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_ADDRS_H
+#define _ASM_IA64_SN_ADDRS_H
+
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/pda.h>
+
+/*
+ * Memory/SHUB Address Format:
+ * +-+---------+--+--------------+
+ * |0| NASID |AS| NodeOffset |
+ * +-+---------+--+--------------+
+ *
+ * NASID: (low NASID bit is 0) Memory and SHUB MMRs
+ * AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
+ * 00: Local Resources and MMR space
+ * Top bit of NodeOffset
+ * 0: Local resources space
+ * node id:
+ * 0: IA64/NT compatibility space
+ * 2: Local MMR Space
+ * 4: Local memory, regardless of local node id
+ * 1: Global MMR space
+ * 01: GET space.
+ * 10: AMO space.
+ * 11: Cacheable memory space.
+ *
+ * NodeOffset: byte offset
+ *
+ *
+ * TIO address format:
+ * +-+----------+--+--------------+
+ * |0| NASID |AS| Nodeoffset |
+ * +-+----------+--+--------------+
+ *
+ * NASID: (low NASID bit is 1) TIO
+ * AS: 2-bit Chiplet Identifier
+ * 00: TIO LB (Indicates TIO MMR access.)
+ * 01: TIO ICE (indicates coretalk space access.)
+ *
+ * NodeOffset: top bit must be set.
+ *
+ *
+ * Note that in both of the above address formats, the low
+ * NASID bit indicates if the reference is to the SHUB or TIO MMRs.
+ */
+
+
+/*
+ * Define basic shift & mask constants for manipulating NASIDs and AS values.
+ */
+#define NASID_BITMASK (sn_hub_info->nasid_bitmask)
+#define NASID_SHIFT (sn_hub_info->nasid_shift)
+#define AS_SHIFT (sn_hub_info->as_shift)
+#define AS_BITMASK 0x3UL
+
+#define NASID_MASK ((u64)NASID_BITMASK << NASID_SHIFT)
+#define AS_MASK ((u64)AS_BITMASK << AS_SHIFT)
+#define REGION_BITS 0xe000000000000000UL
+
+
+/*
+ * AS values. These are the same on both SHUB1 & SHUB2.
+ */
+#define AS_GET_VAL 1UL
+#define AS_AMO_VAL 2UL
+#define AS_CAC_VAL 3UL
+#define AS_GET_SPACE (AS_GET_VAL << AS_SHIFT)
+#define AS_AMO_SPACE (AS_AMO_VAL << AS_SHIFT)
+#define AS_CAC_SPACE (AS_CAC_VAL << AS_SHIFT)
+
+
+/*
+ * Base addresses for various address ranges.
+ */
+#define CACHED 0xe000000000000000UL
+#define UNCACHED 0xc000000000000000UL
+#define UNCACHED_PHYS 0x8000000000000000UL
+
+
+/*
+ * Virtual Mode Local & Global MMR space.
+ */
+#define SH1_LOCAL_MMR_OFFSET 0x8000000000UL
+#define SH2_LOCAL_MMR_OFFSET 0x0200000000UL
+#define LOCAL_MMR_OFFSET (is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
+#define LOCAL_MMR_SPACE (UNCACHED | LOCAL_MMR_OFFSET)
+#define LOCAL_PHYS_MMR_SPACE (UNCACHED_PHYS | LOCAL_MMR_OFFSET)
+
+#define SH1_GLOBAL_MMR_OFFSET 0x0800000000UL
+#define SH2_GLOBAL_MMR_OFFSET 0x0300000000UL
+#define GLOBAL_MMR_OFFSET (is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
+#define GLOBAL_MMR_SPACE (UNCACHED | GLOBAL_MMR_OFFSET)
+
+/*
+ * Physical mode addresses
+ */
+#define GLOBAL_PHYS_MMR_SPACE (UNCACHED_PHYS | GLOBAL_MMR_OFFSET)
+
+
+/*
+ * Clear region & AS bits.
+ */
+#define TO_PHYS_MASK (~(REGION_BITS | AS_MASK))
+
+
+/*
+ * Misc NASID manipulation.
+ */
+#define NASID_SPACE(n) ((u64)(n) << NASID_SHIFT)
+#define REMOTE_ADDR(n,a) (NASID_SPACE(n) | (a))
+#define NODE_OFFSET(x) ((x) & (NODE_ADDRSPACE_SIZE - 1))
+#define NODE_ADDRSPACE_SIZE (1UL << AS_SHIFT)
+#define NASID_GET(x) (int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
+#define LOCAL_MMR_ADDR(a) (LOCAL_MMR_SPACE | (a))
+#define GLOBAL_MMR_ADDR(n,a) (GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_CAC_ADDR(n,a) (CAC_BASE | REMOTE_ADDR(n,a))
+#define CHANGE_NASID(n,x) ((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
+
+
+/* non-II mmr's start at top of big window space (4G) */
+#define BWIN_TOP 0x0000000100000000UL
+
+/*
+ * general address defines
+ */
+#define CAC_BASE (CACHED | AS_CAC_SPACE)
+#define AMO_BASE (UNCACHED | AS_AMO_SPACE)
+#define GET_BASE (CACHED | AS_GET_SPACE)
+
+/*
+ * Convert Memory addresses between various addressing modes.
+ */
+#define TO_PHYS(x) (TO_PHYS_MASK & (x))
+#define TO_CAC(x) (CAC_BASE | TO_PHYS(x))
+#define TO_AMO(x) (AMO_BASE | TO_PHYS(x))
+#define TO_GET(x) (GET_BASE | TO_PHYS(x))
+
+
+/*
+ * Covert from processor physical address to II/TIO physical address:
+ * II - squeeze out the AS bits
+ * TIO- requires a chiplet id in bits 38-39. For DMA to memory,
+ * the chiplet id is zero. If we implement TIO-TIO dma, we might need
+ * to insert a chiplet id into this macro. However, it is our belief
+ * right now that this chiplet id will be ICE, which is also zero.
+ */
+#define PHYS_TO_TIODMA(x) ( (((u64)(x) & NASID_MASK) << 2) | NODE_OFFSET(x))
+#define PHYS_TO_DMA(x) ( (((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space. They define the location of the big and little windows
+ * of any given node.
+ */
+#define BWIN_SIZE_BITS 29 /* big window size: 512M */
+#define TIO_BWIN_SIZE_BITS 30 /* big window size: 1G */
+#define NODE_SWIN_BASE(n, w) ((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
+ : RAW_NODE_SWIN_BASE(n, w))
+#define NODE_IO_BASE(n) (GLOBAL_MMR_SPACE | NASID_SPACE(n))
+#define BWIN_SIZE (1UL << BWIN_SIZE_BITS)
+#define NODE_BWIN_BASE0(n) (NODE_IO_BASE(n) + BWIN_SIZE)
+#define NODE_BWIN_BASE(n, w) (NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
+#define RAW_NODE_SWIN_BASE(n, w) (NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
+#define BWIN_WIDGET_MASK 0x7
+#define BWIN_WINDOWNUM(x) (((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+
+#define TIO_BWIN_WINDOW_SELECT_MASK 0x7
+#define TIO_BWIN_WINDOWNUM(x) (((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
+
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space. They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS 24
+#define SWIN_WIDGET_MASK 0xF
+
+#define TIO_SWIN_SIZE_BITS 28
+#define TIO_SWIN_SIZE (1UL << TIO_SWIN_SIZE_BITS)
+#define TIO_SWIN_WIDGET_MASK 0x3
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define SWIN_WIDGETNUM(x) (((x) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+#define TIO_SWIN_WIDGETNUM(x) (((x) >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers. The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers. The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for x.
+ *
+ * WARNING:
+ * When certain Hub chip workaround are defined, it's not sufficient
+ * to dereference the *_HUB_ADDR() macros. You should instead use
+ * HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ * They're always safe.
+ */
+#define REMOTE_HUB_ADDR(n,x) \
+ ((n & 1) ? \
+ /* TIO: */ \
+ ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x))) \
+ : /* SHUB: */ \
+ (((x) & BWIN_TOP) ? ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))\
+ : ((volatile u64 *)(NODE_SWIN_BASE(n,1) + 0x800000 + (x)))))
+
+
+
+#define HUB_L(x) (*((volatile typeof(*x) *)x))
+#define HUB_S(x,d) (*((volatile typeof(*x) *)x) = (d))
+
+#define REMOTE_HUB_L(n, a) HUB_L(REMOTE_HUB_ADDR((n), (a)))
+#define REMOTE_HUB_S(n, a, d) HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
+
+
+#endif /* _ASM_IA64_SN_ADDRS_H */
diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h
new file mode 100644
index 0000000..7c349f0
--- /dev/null
+++ b/include/asm-ia64/sn/arch.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI specific setup.
+ *
+ * Copyright (C) 1995-1997,1999,2001-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_IA64_SN_ARCH_H
+#define _ASM_IA64_SN_ARCH_H
+
+#include <asm/types.h>
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/sn_cpuid.h>
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced. They are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct sn_hub_info_s {
+ u8 shub2;
+ u8 nasid_shift;
+ u8 as_shift;
+ u8 shub_1_1_found;
+ u16 nasid_bitmask;
+};
+DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
+#define sn_hub_info (&__get_cpu_var(__sn_hub_info))
+#define is_shub2() (sn_hub_info->shub2)
+#define is_shub1() (sn_hub_info->shub2 == 0)
+
+/*
+ * Use this macro to test if shub 1.1 wars should be enabled
+ */
+#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found)
+
+
+/*
+ * This is the maximum number of nodes that can be part of a kernel.
+ * Effectively, it's the maximum number of compact node ids (cnodeid_t).
+ * This is not necessarily the same as MAX_NASIDS.
+ */
+#define MAX_COMPACT_NODES 2048
+#define CPUS_PER_NODE 4
+
+extern void sn_flush_all_caches(long addr, long bytes);
+
+#endif /* _ASM_IA64_SN_ARCH_H */
diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h
new file mode 100644
index 0000000..0ec27f9
--- /dev/null
+++ b/include/asm-ia64/sn/bte.h
@@ -0,0 +1,148 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_BTE_H
+#define _ASM_IA64_SN_BTE_H
+
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <asm/sn/types.h>
+
+
+/* #define BTE_DEBUG */
+/* #define BTE_DEBUG_VERBOSE */
+
+#ifdef BTE_DEBUG
+# define BTE_PRINTK(x) printk x /* Terse */
+# ifdef BTE_DEBUG_VERBOSE
+# define BTE_PRINTKV(x) printk x /* Verbose */
+# else
+# define BTE_PRINTKV(x)
+# endif /* BTE_DEBUG_VERBOSE */
+#else
+# define BTE_PRINTK(x)
+# define BTE_PRINTKV(x)
+#endif /* BTE_DEBUG */
+
+
+/* BTE status register only supports 16 bits for length field */
+#define BTE_LEN_BITS (16)
+#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
+#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+
+
+/* Define hardware */
+#define BTES_PER_NODE 2
+
+
+/* Define hardware modes */
+#define BTE_NOTIFY (IBCT_NOTIFY)
+#define BTE_NORMAL BTE_NOTIFY
+#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
+/* Use a reserved bit to let the caller specify a wait for any BTE */
+#define BTE_WACQUIRE (0x4000)
+/* Use the BTE on the node with the destination memory */
+#define BTE_USE_DEST (BTE_WACQUIRE << 1)
+/* Use any available BTE interface on any node for the transfer */
+#define BTE_USE_ANY (BTE_USE_DEST << 1)
+/* macro to force the IBCT0 value valid */
+#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
+
+#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR)
+#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1)
+#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE)
+
+/*
+ * Some macros to simplify reading.
+ * Start with macros to locate the BTE control registers.
+ */
+#define BTE_LNSTAT_LOAD(_bte) \
+ HUB_L(_bte->bte_base_addr)
+#define BTE_LNSTAT_STORE(_bte, _x) \
+ HUB_S(_bte->bte_base_addr, (_x))
+#define BTE_SRC_STORE(_bte, _x) \
+ HUB_S(_bte->bte_base_addr + (BTEOFF_SRC/8), (_x))
+#define BTE_DEST_STORE(_bte, _x) \
+ HUB_S(_bte->bte_base_addr + (BTEOFF_DEST/8), (_x))
+#define BTE_CTRL_STORE(_bte, _x) \
+ HUB_S(_bte->bte_base_addr + (BTEOFF_CTRL/8), (_x))
+#define BTE_NOTIF_STORE(_bte, _x) \
+ HUB_S(_bte->bte_base_addr + (BTEOFF_NOTIFY/8), (_x))
+
+
+/* Possible results from bte_copy and bte_unaligned_copy */
+/* The following error codes map into the BTE hardware codes
+ * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
+ * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
+ * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
+ * codes to give the following error codes.
+ */
+#define BTEFAIL_OFFSET 1
+
+typedef enum {
+ BTE_SUCCESS, /* 0 is success */
+ BTEFAIL_DIR, /* Directory error due to IIO access*/
+ BTEFAIL_POISON, /* poison error on IO access (write to poison page) */
+ BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */
+ BTEFAIL_ACCESS, /* access error (protection violation) */
+ BTEFAIL_PWERR, /* Partial Write Error */
+ BTEFAIL_PRERR, /* Partial Read Error */
+ BTEFAIL_TOUT, /* CRB Time out */
+ BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */
+ BTEFAIL_NOTAVAIL, /* BTE not available */
+} bte_result_t;
+
+
+/*
+ * Structure defining a bte. An instance of this
+ * structure is created in the nodepda for each
+ * bte on that node (as defined by BTES_PER_NODE)
+ * This structure contains everything necessary
+ * to work with a BTE.
+ */
+struct bteinfo_s {
+ volatile u64 notify ____cacheline_aligned;
+ u64 *bte_base_addr ____cacheline_aligned;
+ spinlock_t spinlock;
+ cnodeid_t bte_cnode; /* cnode */
+ int bte_error_count; /* Number of errors encountered */
+ int bte_num; /* 0 --> BTE0, 1 --> BTE1 */
+ int cleanup_active; /* Interface is locked for cleanup */
+ volatile bte_result_t bh_error; /* error while processing */
+ volatile u64 *most_rcnt_na;
+};
+
+
+/*
+ * Function prototypes (functions defined in bte.c, used elsewhere)
+ */
+extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
+extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
+extern void bte_error_handler(unsigned long);
+
+#define bte_zero(dest, len, mode, notification) \
+ bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
+
+/*
+ * The following is the prefered way of calling bte_unaligned_copy
+ * If the copy is fully cache line aligned, then bte_copy is
+ * used instead. Since bte_copy is inlined, this saves a call
+ * stack. NOTE: bte_copy is called synchronously and does block
+ * until the transfer is complete. In order to get the asynch
+ * version of bte_copy, you must perform this check yourself.
+ */
+#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
+ (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \
+ (dest & L1_CACHE_MASK)) ? \
+ bte_unaligned_copy(src, dest, len, mode) : \
+ bte_copy(src, dest, len, mode, NULL))
+
+
+#endif /* _ASM_IA64_SN_BTE_H */
diff --git a/include/asm-ia64/sn/clksupport.h b/include/asm-ia64/sn/clksupport.h
new file mode 100644
index 0000000..d340c36
--- /dev/null
+++ b/include/asm-ia64/sn/clksupport.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+/*
+ * This file contains definitions for accessing a platform supported high resolution
+ * clock. The clock is monitonically increasing and can be accessed from any node
+ * in the system. The clock is synchronized across nodes - all nodes see the
+ * same value.
+ *
+ * RTC_COUNTER_ADDR - contains the address of the counter
+ *
+ */
+
+#ifndef _ASM_IA64_SN_CLKSUPPORT_H
+#define _ASM_IA64_SN_CLKSUPPORT_H
+
+extern unsigned long sn_rtc_cycles_per_second;
+
+#define RTC_COUNTER_ADDR ((long *)LOCAL_MMR_ADDR(SH_RTC))
+
+#define rtc_time() (*RTC_COUNTER_ADDR)
+
+#endif /* _ASM_IA64_SN_CLKSUPPORT_H */
diff --git a/include/asm-ia64/sn/fetchop.h b/include/asm-ia64/sn/fetchop.h
new file mode 100644
index 0000000..5f4ad8f
--- /dev/null
+++ b/include/asm-ia64/sn/fetchop.h
@@ -0,0 +1,85 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_FETCHOP_H
+#define _ASM_IA64_SN_FETCHOP_H
+
+#include <linux/config.h>
+
+#define FETCHOP_BASENAME "sgi_fetchop"
+#define FETCHOP_FULLNAME "/dev/sgi_fetchop"
+
+
+
+#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */
+
+#define FETCHOP_LOAD 0
+#define FETCHOP_INCREMENT 8
+#define FETCHOP_DECREMENT 16
+#define FETCHOP_CLEAR 24
+
+#define FETCHOP_STORE 0
+#define FETCHOP_AND 24
+#define FETCHOP_OR 32
+
+#define FETCHOP_CLEAR_CACHE 56
+
+#define FETCHOP_LOAD_OP(addr, op) ( \
+ *(volatile long *)((char*) (addr) + (op)))
+
+#define FETCHOP_STORE_OP(addr, op, x) ( \
+ *(volatile long *)((char*) (addr) + (op)) = (long) (x))
+
+#ifdef __KERNEL__
+
+/*
+ * Convert a region 6 (kaddr) address to the address of the fetchop variable
+ */
+#define FETCHOP_KADDR_TO_MSPEC_ADDR(kaddr) TO_MSPEC(kaddr)
+
+
+/*
+ * Each Atomic Memory Operation (AMO formerly known as fetchop)
+ * variable is 64 bytes long. The first 8 bytes are used. The
+ * remaining 56 bytes are unaddressable due to the operation taking
+ * that portion of the address.
+ *
+ * NOTE: The AMO_t _MUST_ be placed in either the first or second half
+ * of the cache line. The cache line _MUST NOT_ be used for anything
+ * other than additional AMO_t entries. This is because there are two
+ * addresses which reference the same physical cache line. One will
+ * be a cached entry with the memory type bits all set. This address
+ * may be loaded into processor cache. The AMO_t will be referenced
+ * uncached via the memory special memory type. If any portion of the
+ * cached cache-line is modified, when that line is flushed, it will
+ * overwrite the uncached value in physical memory and lead to
+ * inconsistency.
+ */
+typedef struct {
+ u64 variable;
+ u64 unused[7];
+} AMO_t;
+
+
+/*
+ * The following APIs are externalized to the kernel to allocate/free pages of
+ * fetchop variables.
+ * fetchop_kalloc_page - Allocate/initialize 1 fetchop page on the
+ * specified cnode.
+ * fetchop_kfree_page - Free a previously allocated fetchop page
+ */
+
+unsigned long fetchop_kalloc_page(int nid);
+void fetchop_kfree_page(unsigned long maddr);
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SN_FETCHOP_H */
+
diff --git a/include/asm-ia64/sn/geo.h b/include/asm-ia64/sn/geo.h
new file mode 100644
index 0000000..f566343
--- /dev/null
+++ b/include/asm-ia64/sn/geo.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_GEO_H
+#define _ASM_IA64_SN_GEO_H
+
+/* The geoid_t implementation below is based loosely on the pcfg_t
+ implementation in sys/SN/promcfg.h. */
+
+/* Type declaractions */
+
+/* Size of a geoid_t structure (must be before decl. of geoid_u) */
+#define GEOID_SIZE 8 /* Would 16 be better? The size can
+ be different on different platforms. */
+
+#define MAX_SLABS 0xe /* slabs per module */
+
+typedef unsigned char geo_type_t;
+
+/* Fields common to all substructures */
+typedef struct geo_any_s {
+ moduleid_t module; /* The module (box) this h/w lives in */
+ geo_type_t type; /* What type of h/w is named by this geoid_t */
+ slabid_t slab; /* The logical assembly within the module */
+} geo_any_t;
+
+/* Additional fields for particular types of hardware */
+typedef struct geo_node_s {
+ geo_any_t any; /* No additional fields needed */
+} geo_node_t;
+
+typedef struct geo_rtr_s {
+ geo_any_t any; /* No additional fields needed */
+} geo_rtr_t;
+
+typedef struct geo_iocntl_s {
+ geo_any_t any; /* No additional fields needed */
+} geo_iocntl_t;
+
+typedef struct geo_pcicard_s {
+ geo_iocntl_t any;
+ char bus; /* Bus/widget number */
+ char slot; /* PCI slot number */
+} geo_pcicard_t;
+
+/* Subcomponents of a node */
+typedef struct geo_cpu_s {
+ geo_node_t node;
+ char slice; /* Which CPU on the node */
+} geo_cpu_t;
+
+typedef struct geo_mem_s {
+ geo_node_t node;
+ char membus; /* The memory bus on the node */
+ char memslot; /* The memory slot on the bus */
+} geo_mem_t;
+
+
+typedef union geoid_u {
+ geo_any_t any;
+ geo_node_t node;
+ geo_iocntl_t iocntl;
+ geo_pcicard_t pcicard;
+ geo_rtr_t rtr;
+ geo_cpu_t cpu;
+ geo_mem_t mem;
+ char padsize[GEOID_SIZE];
+} geoid_t;
+
+
+/* Preprocessor macros */
+
+#define GEO_MAX_LEN 48 /* max. formatted length, plus some pad:
+ module/001c07/slab/5/node/memory/2/slot/4 */
+
+/* Values for geo_type_t */
+#define GEO_TYPE_INVALID 0
+#define GEO_TYPE_MODULE 1
+#define GEO_TYPE_NODE 2
+#define GEO_TYPE_RTR 3
+#define GEO_TYPE_IOCNTL 4
+#define GEO_TYPE_IOCARD 5
+#define GEO_TYPE_CPU 6
+#define GEO_TYPE_MEM 7
+#define GEO_TYPE_MAX (GEO_TYPE_MEM+1)
+
+/* Parameter for hwcfg_format_geoid_compt() */
+#define GEO_COMPT_MODULE 1
+#define GEO_COMPT_SLAB 2
+#define GEO_COMPT_IOBUS 3
+#define GEO_COMPT_IOSLOT 4
+#define GEO_COMPT_CPU 5
+#define GEO_COMPT_MEMBUS 6
+#define GEO_COMPT_MEMSLOT 7
+
+#define GEO_INVALID_STR "<invalid>"
+
+#define INVALID_NASID ((nasid_t)-1)
+#define INVALID_CNODEID ((cnodeid_t)-1)
+#define INVALID_PNODEID ((pnodeid_t)-1)
+#define INVALID_SLAB (slabid_t)-1
+#define INVALID_MODULE ((moduleid_t)-1)
+#define INVALID_PARTID ((partid_t)-1)
+
+static inline slabid_t geo_slab(geoid_t g)
+{
+ return (g.any.type == GEO_TYPE_INVALID) ?
+ INVALID_SLAB : g.any.slab;
+}
+
+static inline moduleid_t geo_module(geoid_t g)
+{
+ return (g.any.type == GEO_TYPE_INVALID) ?
+ INVALID_MODULE : g.any.module;
+}
+
+extern geoid_t cnodeid_get_geoid(cnodeid_t cnode);
+
+#endif /* _ASM_IA64_SN_GEO_H */
diff --git a/include/asm-ia64/sn/intr.h b/include/asm-ia64/sn/intr.h
new file mode 100644
index 0000000..e51471f
--- /dev/null
+++ b/include/asm-ia64/sn/intr.h
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_INTR_H
+#define _ASM_IA64_SN_INTR_H
+
+#define SGI_UART_VECTOR (0xe9)
+#define SGI_PCIBR_ERROR (0x33)
+
+/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
+#define SGI_XPC_ACTIVATE (0x30)
+#define SGI_II_ERROR (0x31)
+#define SGI_XBOW_ERROR (0x32)
+#define SGI_PCIBR_ERROR (0x33)
+#define SGI_ACPI_SCI_INT (0x34)
+#define SGI_TIOCA_ERROR (0x35)
+#define SGI_TIO_ERROR (0x36)
+#define SGI_TIOCX_ERROR (0x37)
+#define SGI_MMTIMER_VECTOR (0x38)
+#define SGI_XPC_NOTIFY (0xe7)
+
+#define IA64_SN2_FIRST_DEVICE_VECTOR (0x3c)
+#define IA64_SN2_LAST_DEVICE_VECTOR (0xe6)
+
+#define SN2_IRQ_RESERVED (0x1)
+#define SN2_IRQ_CONNECTED (0x2)
+#define SN2_IRQ_SHARED (0x4)
+
+// The SN PROM irq struct
+struct sn_irq_info {
+ struct sn_irq_info *irq_next; /* sharing irq list */
+ short irq_nasid; /* Nasid IRQ is assigned to */
+ int irq_slice; /* slice IRQ is assigned to */
+ int irq_cpuid; /* kernel logical cpuid */
+ int irq_irq; /* the IRQ number */
+ int irq_int_bit; /* Bridge interrupt pin */
+ uint64_t irq_xtalkaddr; /* xtalkaddr IRQ is sent to */
+ int irq_bridge_type;/* pciio asic type (pciio.h) */
+ void *irq_bridge; /* bridge generating irq */
+ void *irq_pciioinfo; /* associated pciio_info_t */
+ int irq_last_intr; /* For Shub lb lost intr WAR */
+ int irq_cookie; /* unique cookie */
+ int irq_flags; /* flags */
+ int irq_share_cnt; /* num devices sharing IRQ */
+};
+
+extern void sn_send_IPI_phys(int, long, int, int);
+
+#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector)
+
+#endif /* _ASM_IA64_SN_INTR_H */
diff --git a/include/asm-ia64/sn/io.h b/include/asm-ia64/sn/io.h
new file mode 100644
index 0000000..4220973
--- /dev/null
+++ b/include/asm-ia64/sn/io.h
@@ -0,0 +1,265 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_SN_IO_H
+#define _ASM_SN_IO_H
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+
+extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
+extern void __sn_mmiowb(void); /* Forward definition */
+
+extern int numionodes;
+
+#define __sn_mf_a() ia64_mfa()
+
+extern void sn_dma_flush(unsigned long);
+
+#define __sn_inb ___sn_inb
+#define __sn_inw ___sn_inw
+#define __sn_inl ___sn_inl
+#define __sn_outb ___sn_outb
+#define __sn_outw ___sn_outw
+#define __sn_outl ___sn_outl
+#define __sn_readb ___sn_readb
+#define __sn_readw ___sn_readw
+#define __sn_readl ___sn_readl
+#define __sn_readq ___sn_readq
+#define __sn_readb_relaxed ___sn_readb_relaxed
+#define __sn_readw_relaxed ___sn_readw_relaxed
+#define __sn_readl_relaxed ___sn_readl_relaxed
+#define __sn_readq_relaxed ___sn_readq_relaxed
+
+/*
+ * The following routines are SN Platform specific, called when
+ * a reference is made to inX/outX set macros. SN Platform
+ * inX set of macros ensures that Posted DMA writes on the
+ * Bridge is flushed.
+ *
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned int
+___sn_inb (unsigned long port)
+{
+ volatile unsigned char *addr;
+ unsigned char ret = -1;
+
+ if ((addr = sn_io_addr(port))) {
+ ret = *addr;
+ __sn_mf_a();
+ sn_dma_flush((unsigned long)addr);
+ }
+ return ret;
+}
+
+static inline unsigned int
+___sn_inw (unsigned long port)
+{
+ volatile unsigned short *addr;
+ unsigned short ret = -1;
+
+ if ((addr = sn_io_addr(port))) {
+ ret = *addr;
+ __sn_mf_a();
+ sn_dma_flush((unsigned long)addr);
+ }
+ return ret;
+}
+
+static inline unsigned int
+___sn_inl (unsigned long port)
+{
+ volatile unsigned int *addr;
+ unsigned int ret = -1;
+
+ if ((addr = sn_io_addr(port))) {
+ ret = *addr;
+ __sn_mf_a();
+ sn_dma_flush((unsigned long)addr);
+ }
+ return ret;
+}
+
+static inline void
+___sn_outb (unsigned char val, unsigned long port)
+{
+ volatile unsigned char *addr;
+
+ if ((addr = sn_io_addr(port))) {
+ *addr = val;
+ __sn_mmiowb();
+ }
+}
+
+static inline void
+___sn_outw (unsigned short val, unsigned long port)
+{
+ volatile unsigned short *addr;
+
+ if ((addr = sn_io_addr(port))) {
+ *addr = val;
+ __sn_mmiowb();
+ }
+}
+
+static inline void
+___sn_outl (unsigned int val, unsigned long port)
+{
+ volatile unsigned int *addr;
+
+ if ((addr = sn_io_addr(port))) {
+ *addr = val;
+ __sn_mmiowb();
+ }
+}
+
+/*
+ * The following routines are SN Platform specific, called when
+ * a reference is made to readX/writeX set macros. SN Platform
+ * readX set of macros ensures that Posted DMA writes on the
+ * Bridge is flushed.
+ *
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned char
+___sn_readb (const volatile void __iomem *addr)
+{
+ unsigned char val;
+
+ val = *(volatile unsigned char __force *)addr;
+ __sn_mf_a();
+ sn_dma_flush((unsigned long)addr);
+ return val;
+}
+
+static inline unsigned short
+___sn_readw (const volatile void __iomem *addr)
+{
+ unsigned short val;
+
+ val = *(volatile unsigned short __force *)addr;
+ __sn_mf_a();
+ sn_dma_flush((unsigned long)addr);
+ return val;
+}
+
+static inline unsigned int
+___sn_readl (const volatile void __iomem *addr)
+{
+ unsigned int val;
+
+ val = *(volatile unsigned int __force *)addr;
+ __sn_mf_a();
+ sn_dma_flush((unsigned long)addr);
+ return val;
+}
+
+static inline unsigned long
+___sn_readq (const volatile void __iomem *addr)
+{
+ unsigned long val;
+
+ val = *(volatile unsigned long __force *)addr;
+ __sn_mf_a();
+ sn_dma_flush((unsigned long)addr);
+ return val;
+}
+
+/*
+ * For generic and SN2 kernels, we have a set of fast access
+ * PIO macros. These macros are provided on SN Platform
+ * because the normal inX and readX macros perform an
+ * additional task of flushing Post DMA request on the Bridge.
+ *
+ * These routines should be self explainatory.
+ */
+
+static inline unsigned int
+sn_inb_fast (unsigned long port)
+{
+ volatile unsigned char *addr = (unsigned char *)port;
+ unsigned char ret;
+
+ ret = *addr;
+ __sn_mf_a();
+ return ret;
+}
+
+static inline unsigned int
+sn_inw_fast (unsigned long port)
+{
+ volatile unsigned short *addr = (unsigned short *)port;
+ unsigned short ret;
+
+ ret = *addr;
+ __sn_mf_a();
+ return ret;
+}
+
+static inline unsigned int
+sn_inl_fast (unsigned long port)
+{
+ volatile unsigned int *addr = (unsigned int *)port;
+ unsigned int ret;
+
+ ret = *addr;
+ __sn_mf_a();
+ return ret;
+}
+
+static inline unsigned char
+___sn_readb_relaxed (const volatile void __iomem *addr)
+{
+ return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___sn_readw_relaxed (const volatile void __iomem *addr)
+{
+ return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___sn_readl_relaxed (const volatile void __iomem *addr)
+{
+ return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___sn_readq_relaxed (const volatile void __iomem *addr)
+{
+ return *(volatile unsigned long __force *) addr;
+}
+
+struct pci_dev;
+
+static inline int
+sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan)
+{
+
+ if (vchan > 1) {
+ return -1;
+ }
+
+ if (!(*addr >> 32)) /* Using a mask here would be cleaner */
+ return 0; /* but this generates better code */
+
+ if (vchan == 1) {
+ /* Set Bit 57 */
+ *addr |= (1UL << 57);
+ } else {
+ /* Clear Bit 57 */
+ *addr &= ~(1UL << 57);
+ }
+
+ return 0;
+}
+
+#endif /* _ASM_SN_IO_H */
diff --git a/include/asm-ia64/sn/klconfig.h b/include/asm-ia64/sn/klconfig.h
new file mode 100644
index 0000000..9f920c7
--- /dev/null
+++ b/include/asm-ia64/sn/klconfig.h
@@ -0,0 +1,272 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_KLCONFIG_H
+#define _ASM_IA64_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+typedef s32 klconf_off_t;
+
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+ char pad[20];
+ klconf_off_t ch_board_info; /* the link list of boards */
+ char pad0[88];
+} kl_config_hdr_t;
+
+
+#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
+ * First board info on the remote node. The remote node list is
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ *
+ KLCONFIG
+
+ +------------+ +------------+ +------------+ +------------+
+ | lboard | +-->| lboard | +-->| rboard | +-->| lboard |
+ +------------+ | +------------+ | +------------+ | +------------+
+ | board info | | | board info | | |errinfo,bptr| | | board info |
+ +------------+ | +------------+ | +------------+ | +------------+
+ | offset |--+ | offset |--+ | offset |--+ |offset=NULL |
+ +------------+ +------------+ +------------+ +------------+
+
+
+ +------------+
+ | board info |
+ +------------+ +--------------------------------+
+ | compt 1 |------>| type, rev, diaginfo, size ... | (CPU)
+ +------------+ +--------------------------------+
+ | compt 2 |--+
+ +------------+ | +--------------------------------+
+ | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK)
+ +------------+ +--------------------------------+
+ | errinfo |--+
+ +------------+ | +--------------------------------+
+ +--->|r/l brd errinfo,compt err flags |
+ +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error
+ * information specific to the COMPONENT is present in the respective
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ *
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+
+/*
+ * BOARD classes
+ */
+
+#define KLCLASS_MASK 0xf0
+#define KLCLASS_NONE 0x00
+#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */
+#define KLCLASS_CPU KLCLASS_NODE
+#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI
+ and the non-graphics widget boards */
+#define KLCLASS_ROUTER 0x30 /* Router board */
+#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board
+ so that we can record error info */
+#define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */
+#define KLCLASS_MAX 8 /* Bump this if a new CLASS is added */
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+
+/*
+ * board types
+ */
+
+#define KLTYPE_MASK 0x0f
+#define KLTYPE(_x) ((_x) & KLTYPE_MASK)
+
+#define KLTYPE_SNIA (KLCLASS_CPU | 0x1)
+#define KLTYPE_TIO (KLCLASS_CPU | 0x2)
+
+#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
+
+#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4)
+#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6)
+#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7)
+#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8)
+#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9)
+#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa)
+#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb)
+#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc)
+#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd)
+
+
+/*
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+typedef struct lboard_s {
+ klconf_off_t brd_next_any; /* Next BOARD */
+ unsigned char struct_type; /* type of structure, local or remote */
+ unsigned char brd_type; /* type+class */
+ unsigned char brd_sversion; /* version of this structure */
+ unsigned char brd_brevision; /* board revision */
+ unsigned char brd_promver; /* board prom version, if any */
+ unsigned char brd_flags; /* Enabled, Disabled etc */
+ unsigned char brd_slot; /* slot number */
+ unsigned short brd_debugsw; /* Debug switches */
+ geoid_t brd_geoid; /* geo id */
+ partid_t brd_partition; /* Partition number */
+ unsigned short brd_diagval; /* diagnostic value */
+ unsigned short brd_diagparm; /* diagnostic parameter */
+ unsigned char brd_inventory; /* inventory history */
+ unsigned char brd_numcompts; /* Number of components */
+ nic_t brd_nic; /* Number in CAN */
+ nasid_t brd_nasid; /* passed parameter */
+ klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+ klconf_off_t brd_errinfo; /* Board's error information */
+ struct lboard_s *brd_parent; /* Logical parent for this brd */
+ char pad0[4];
+ unsigned char brd_confidence; /* confidence that the board is bad */
+ nasid_t brd_owner; /* who owns this board */
+ unsigned char brd_nic_flags; /* To handle 8 more NICs */
+ char pad1[24]; /* future expansion */
+ char brd_name[32];
+ nasid_t brd_next_same_host; /* host of next brd w/same nasid */
+ klconf_off_t brd_next_same; /* Next BOARD with same nasid */
+} lboard_t;
+
+#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts)
+#define NODE_OFFSET_TO_KLINFO(n,off) ((klinfo_t*) TO_NODE_CAC(n,off))
+#define KLCF_NEXT(_brd) \
+ ((_brd)->brd_next_same ? \
+ (NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL)
+#define KLCF_NEXT_ANY(_brd) \
+ ((_brd)->brd_next_any ? \
+ (NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL)
+#define KLCF_COMP(_brd, _ndx) \
+ ((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \
+ (NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)])))
+
+
+/*
+ * Generic info structure. This stores common info about a
+ * component.
+ */
+
+typedef struct klinfo_s { /* Generic info */
+ unsigned char struct_type; /* type of this structure */
+ unsigned char struct_version; /* version of this structure */
+ unsigned char flags; /* Enabled, disabled etc */
+ unsigned char revision; /* component revision */
+ unsigned short diagval; /* result of diagnostics */
+ unsigned short diagparm; /* diagnostic parameter */
+ unsigned char inventory; /* previous inventory status */
+ unsigned short partid; /* widget part number */
+ nic_t nic; /* MUst be aligned properly */
+ unsigned char physid; /* physical id of component */
+ unsigned int virtid; /* virtual id as seen by system */
+ unsigned char widid; /* Widget id - if applicable */
+ nasid_t nasid; /* node number - from parent */
+ char pad1; /* pad out structure. */
+ char pad2; /* pad out structure. */
+ void *data;
+ klconf_off_t errinfo; /* component specific errors */
+ unsigned short pad3; /* pci fields have moved over to */
+ unsigned short pad4; /* klbri_t */
+} klinfo_t ;
+
+
+static inline lboard_t *find_lboard_any(lboard_t * start, unsigned char brd_type)
+{
+ /* Search all boards stored on this node. */
+
+ while (start) {
+ if (start->brd_type == brd_type)
+ return start;
+ start = KLCF_NEXT_ANY(start);
+ }
+ /* Didn't find it. */
+ return (lboard_t *) NULL;
+}
+
+
+/* external declarations of Linux kernel functions. */
+
+extern lboard_t *root_lboard[];
+extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
+extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
+
+#endif /* _ASM_IA64_SN_KLCONFIG_H */
diff --git a/include/asm-ia64/sn/l1.h b/include/asm-ia64/sn/l1.h
new file mode 100644
index 0000000..d5dbd55
--- /dev/null
+++ b/include/asm-ia64/sn/l1.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+#ifndef _ASM_IA64_SN_L1_H
+#define _ASM_IA64_SN_L1_H
+
+/* brick type response codes */
+#define L1_BRICKTYPE_PX 0x23 /* # */
+#define L1_BRICKTYPE_PE 0x25 /* % */
+#define L1_BRICKTYPE_N_p0 0x26 /* & */
+#define L1_BRICKTYPE_IP45 0x34 /* 4 */
+#define L1_BRICKTYPE_IP41 0x35 /* 5 */
+#define L1_BRICKTYPE_TWISTER 0x36 /* 6 */ /* IP53 & ROUTER */
+#define L1_BRICKTYPE_IX 0x3d /* = */
+#define L1_BRICKTYPE_IP34 0x61 /* a */
+#define L1_BRICKTYPE_GA 0x62 /* b */
+#define L1_BRICKTYPE_C 0x63 /* c */
+#define L1_BRICKTYPE_OPUS_TIO 0x66 /* f */
+#define L1_BRICKTYPE_I 0x69 /* i */
+#define L1_BRICKTYPE_N 0x6e /* n */
+#define L1_BRICKTYPE_OPUS 0x6f /* o */
+#define L1_BRICKTYPE_P 0x70 /* p */
+#define L1_BRICKTYPE_R 0x72 /* r */
+#define L1_BRICKTYPE_CHI_CG 0x76 /* v */
+#define L1_BRICKTYPE_X 0x78 /* x */
+#define L1_BRICKTYPE_X2 0x79 /* y */
+#define L1_BRICKTYPE_SA 0x5e /* ^ */ /* TIO bringup brick */
+#define L1_BRICKTYPE_PA 0x6a /* j */
+#define L1_BRICKTYPE_IA 0x6b /* k */
+
+#endif /* _ASM_IA64_SN_L1_H */
diff --git a/include/asm-ia64/sn/leds.h b/include/asm-ia64/sn/leds.h
new file mode 100644
index 0000000..66cf8c4
--- /dev/null
+++ b/include/asm-ia64/sn/leds.h
@@ -0,0 +1,33 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_LEDS_H
+#define _ASM_IA64_SN_LEDS_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/shub_mmr.h>
+
+#define LED0 (LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0))
+#define LED_CPU_SHIFT 16
+
+#define LED_CPU_HEARTBEAT 0x01
+#define LED_CPU_ACTIVITY 0x02
+#define LED_ALWAYS_SET 0x00
+
+/*
+ * Basic macros for flashing the LEDS on an SGI SN.
+ */
+
+static __inline__ void
+set_led_bits(u8 value, u8 mask)
+{
+ pda->led_state = (pda->led_state & ~mask) | (value & mask);
+ *pda->led_address = (short) pda->led_state;
+}
+
+#endif /* _ASM_IA64_SN_LEDS_H */
+
diff --git a/include/asm-ia64/sn/module.h b/include/asm-ia64/sn/module.h
new file mode 100644
index 0000000..734e980
--- /dev/null
+++ b/include/asm-ia64/sn/module.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_MODULE_H
+#define _ASM_IA64_SN_MODULE_H
+
+/* parameter for format_module_id() */
+#define MODULE_FORMAT_BRIEF 1
+#define MODULE_FORMAT_LONG 2
+#define MODULE_FORMAT_LCD 3
+
+/*
+ * Module id format
+ *
+ * 31-16 Rack ID (encoded class, group, number - 16-bit unsigned int)
+ * 15-8 Brick type (8-bit ascii character)
+ * 7-0 Bay (brick position in rack (0-63) - 8-bit unsigned int)
+ *
+ */
+
+/*
+ * Macros for getting the brick type
+ */
+#define MODULE_BTYPE_MASK 0xff00
+#define MODULE_BTYPE_SHFT 8
+#define MODULE_GET_BTYPE(_m) (((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT)
+#define MODULE_BT_TO_CHAR(_b) ((char)(_b))
+#define MODULE_GET_BTCHAR(_m) (MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m)))
+
+/*
+ * Macros for getting the rack ID.
+ */
+#define MODULE_RACK_MASK 0xffff0000
+#define MODULE_RACK_SHFT 16
+#define MODULE_GET_RACK(_m) (((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT)
+
+/*
+ * Macros for getting the brick position
+ */
+#define MODULE_BPOS_MASK 0x00ff
+#define MODULE_BPOS_SHFT 0
+#define MODULE_GET_BPOS(_m) (((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ * class (0==CPU/mixed, 1==I/O), group, number
+ *
+ * Rack number is stored just as it is displayed on the screen:
+ * a 3-decimal-digit number.
+ */
+#define RACK_CLASS_DVDR 100
+#define RACK_GROUP_DVDR 10
+#define RACK_NUM_DVDR 1
+
+#define RACK_CREATE_RACKID(_c, _g, _n) ((_c) * RACK_CLASS_DVDR + \
+ (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR)
+
+#define RACK_GET_CLASS(_r) ((_r) / RACK_CLASS_DVDR)
+#define RACK_GET_GROUP(_r) (((_r) - RACK_GET_CLASS(_r) * \
+ RACK_CLASS_DVDR) / RACK_GROUP_DVDR)
+#define RACK_GET_NUM(_r) (((_r) - RACK_GET_CLASS(_r) * \
+ RACK_CLASS_DVDR - RACK_GET_GROUP(_r) * \
+ RACK_GROUP_DVDR) / RACK_NUM_DVDR)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ * class 1 bit, 0==CPU/mixed, 1==I/O
+ * group 2 bits for CPU/mixed, 3 bits for I/O
+ * number 3 bits for CPU/mixed, 2 bits for I/O (1 based)
+ */
+#define RACK_GROUP_BITS(_r) (RACK_GET_CLASS(_r) ? 3 : 2)
+#define RACK_NUM_BITS(_r) (RACK_GET_CLASS(_r) ? 2 : 3)
+
+#define RACK_CLASS_MASK(_r) 0x20
+#define RACK_CLASS_SHFT(_r) 5
+#define RACK_ADD_CLASS(_r, _c) \
+ ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r))
+
+#define RACK_GROUP_SHFT(_r) RACK_NUM_BITS(_r)
+#define RACK_GROUP_MASK(_r) \
+ ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) )
+#define RACK_ADD_GROUP(_r, _g) \
+ ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r))
+
+#define RACK_NUM_SHFT(_r) 0
+#define RACK_NUM_MASK(_r) \
+ ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) )
+#define RACK_ADD_NUM(_r, _n) \
+ ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r))
+
+
+/*
+ * Brick type definitions
+ */
+#define MAX_BRICK_TYPES 256 /* brick type is stored as uchar */
+
+extern char brick_types[];
+
+#define MODULE_CBRICK 0
+#define MODULE_RBRICK 1
+#define MODULE_IBRICK 2
+#define MODULE_KBRICK 3
+#define MODULE_XBRICK 4
+#define MODULE_DBRICK 5
+#define MODULE_PBRICK 6
+#define MODULE_NBRICK 7
+#define MODULE_PEBRICK 8
+#define MODULE_PXBRICK 9
+#define MODULE_IXBRICK 10
+#define MODULE_CGBRICK 11
+#define MODULE_OPUSBRICK 12
+#define MODULE_SABRICK 13 /* TIO BringUp Brick */
+#define MODULE_IABRICK 14
+#define MODULE_PABRICK 15
+#define MODULE_GABRICK 16
+#define MODULE_OPUS_TIO 17 /* OPUS TIO Riser */
+
+extern char brick_types[];
+extern void format_module_id(char *, moduleid_t, int);
+
+#endif /* _ASM_IA64_SN_MODULE_H */
diff --git a/include/asm-ia64/sn/nodepda.h b/include/asm-ia64/sn/nodepda.h
new file mode 100644
index 0000000..2fbde33
--- /dev/null
+++ b/include/asm-ia64/sn/nodepda.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_NODEPDA_H
+#define _ASM_IA64_SN_NODEPDA_H
+
+
+#include <asm/semaphore.h>
+#include <asm/irq.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/intr.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/bte.h>
+
+/*
+ * NUMA Node-Specific Data structures are defined in this file.
+ * In particular, this is the location of the node PDA.
+ * A pointer to the right node PDA is saved in each CPU PDA.
+ */
+
+/*
+ * Node-specific data structure.
+ *
+ * One of these structures is allocated on each node of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together
+ * all per-node data structures.
+ */
+struct phys_cpuid {
+ short nasid;
+ char subnode;
+ char slice;
+};
+
+struct nodepda_s {
+ void *pdinfo; /* Platform-dependent per-node info */
+ spinlock_t bist_lock;
+
+ /*
+ * The BTEs on this node are shared by the local cpus
+ */
+ struct bteinfo_s bte_if[BTES_PER_NODE]; /* Virtual Interface */
+ struct timer_list bte_recovery_timer;
+ spinlock_t bte_recovery_lock;
+
+ /*
+ * Array of pointers to the nodepdas for each node.
+ */
+ struct nodepda_s *pernode_pdaindr[MAX_COMPACT_NODES];
+
+ /*
+ * Array of physical cpu identifiers. Indexed by cpuid.
+ */
+ struct phys_cpuid phys_cpuid[NR_CPUS];
+};
+
+typedef struct nodepda_s nodepda_t;
+
+/*
+ * Access Functions for node PDA.
+ * Since there is one nodepda for each node, we need a convenient mechanism
+ * to access these nodepdas without cluttering code with #ifdefs.
+ * The next set of definitions provides this.
+ * Routines are expected to use
+ *
+ * nodepda -> to access node PDA for the node on which code is running
+ * subnodepda -> to access subnode PDA for the subnode on which code is running
+ *
+ * NODEPDA(cnode) -> to access node PDA for cnodeid
+ * SUBNODEPDA(cnode,sn) -> to access subnode PDA for cnodeid/subnode
+ */
+
+#define nodepda pda->p_nodepda /* Ptr to this node's PDA */
+#define NODEPDA(cnode) (nodepda->pernode_pdaindr[cnode])
+
+/*
+ * Check if given a compact node id the corresponding node has all the
+ * cpus disabled.
+ */
+#define is_headless_node(cnode) (nr_cpus_node(cnode) == 0)
+
+#endif /* _ASM_IA64_SN_NODEPDA_H */
diff --git a/include/asm-ia64/sn/pda.h b/include/asm-ia64/sn/pda.h
new file mode 100644
index 0000000..e940d36
--- /dev/null
+++ b/include/asm-ia64/sn/pda.h
@@ -0,0 +1,80 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PDA_H
+#define _ASM_IA64_SN_PDA_H
+
+#include <linux/cache.h>
+#include <asm/percpu.h>
+#include <asm/system.h>
+#include <asm/sn/bte.h>
+
+
+/*
+ * CPU-specific data structure.
+ *
+ * One of these structures is allocated for each cpu of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together
+ * all SN per-cpu data structures.
+ */
+
+typedef struct pda_s {
+
+ /* Having a pointer in the begining of PDA tends to increase
+ * the chance of having this pointer in cache. (Yes something
+ * else gets pushed out). Doing this reduces the number of memory
+ * access to all nodepda variables to be one
+ */
+ struct nodepda_s *p_nodepda; /* Pointer to Per node PDA */
+ struct subnodepda_s *p_subnodepda; /* Pointer to CPU subnode PDA */
+
+ /*
+ * Support for SN LEDs
+ */
+ volatile short *led_address;
+ u8 led_state;
+ u8 hb_state; /* supports blinking heartbeat leds */
+ unsigned int hb_count;
+
+ unsigned int idle_flag;
+
+ volatile unsigned long *bedrock_rev_id;
+ volatile unsigned long *pio_write_status_addr;
+ unsigned long pio_write_status_val;
+ volatile unsigned long *pio_shub_war_cam_addr;
+
+ unsigned long sn_soft_irr[4];
+ unsigned long sn_in_service_ivecs[4];
+ short cnodeid_to_nasid_table[MAX_NUMNODES];
+ int sn_lb_int_war_ticks;
+ int sn_last_irq;
+ int sn_first_irq;
+} pda_t;
+
+
+#define CACHE_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
+
+/*
+ * PDA
+ * Per-cpu private data area for each cpu. The PDA is located immediately after
+ * the IA64 cpu_data area. A full page is allocated for the cp_data area for each
+ * cpu but only a small amout of the page is actually used. We put the SNIA PDA
+ * in the same page as the cpu_data area. Note that there is a check in the setup
+ * code to verify that we don't overflow the page.
+ *
+ * Seems like we should should cache-line align the pda so that any changes in the
+ * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
+ * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
+ */
+DECLARE_PER_CPU(struct pda_s, pda_percpu);
+
+#define pda (&__ia64_per_cpu_var(pda_percpu))
+
+#define pdacpu(cpu) (&per_cpu(pda_percpu, cpu))
+
+#endif /* _ASM_IA64_SN_PDA_H */
diff --git a/include/asm-ia64/sn/rw_mmr.h b/include/asm-ia64/sn/rw_mmr.h
new file mode 100644
index 0000000..f40fd1a
--- /dev/null
+++ b/include/asm-ia64/sn/rw_mmr.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002-2004 Silicon Graphics, Inc. All Rights Reserved.
+ */
+#ifndef _ASM_IA64_SN_RW_MMR_H
+#define _ASM_IA64_SN_RW_MMR_H
+
+
+/*
+ * This file contains macros used to access MMR registers via
+ * uncached physical addresses.
+ * pio_phys_read_mmr - read an MMR
+ * pio_phys_write_mmr - write an MMR
+ * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
+ * Second MMR will be skipped if address is NULL
+ *
+ * Addresses passed to these routines should be uncached physical addresses
+ * ie., 0x80000....
+ */
+
+
+extern inline long
+pio_phys_read_mmr(volatile long *mmr)
+{
+ long val;
+ asm volatile
+ ("mov r2=psr;;"
+ "rsm psr.i | psr.dt;;"
+ "srlz.i;;"
+ "ld8.acq %0=[%1];;"
+ "mov psr.l=r2;;"
+ "srlz.i;;"
+ : "=r"(val)
+ : "r"(mmr)
+ : "r2");
+ return val;
+}
+
+
+
+extern inline void
+pio_phys_write_mmr(volatile long *mmr, long val)
+{
+ asm volatile
+ ("mov r2=psr;;"
+ "rsm psr.i | psr.dt;;"
+ "srlz.i;;"
+ "st8.rel [%0]=%1;;"
+ "mov psr.l=r2;;"
+ "srlz.i;;"
+ :: "r"(mmr), "r"(val)
+ : "r2", "memory");
+}
+
+extern inline void
+pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2)
+{
+ asm volatile
+ ("mov r2=psr;;"
+ "rsm psr.i | psr.dt | psr.ic;;"
+ "cmp.ne p9,p0=%2,r0;"
+ "srlz.i;;"
+ "st8.rel [%0]=%1;"
+ "(p9) st8.rel [%2]=%3;;"
+ "mov psr.l=r2;;"
+ "srlz.i;;"
+ :: "r"(mmr1), "r"(val1), "r"(mmr2), "r"(val2)
+ : "p9", "r2", "memory");
+}
+
+#endif /* _ASM_IA64_SN_RW_MMR_H */
diff --git a/include/asm-ia64/sn/shub_mmr.h b/include/asm-ia64/sn/shub_mmr.h
new file mode 100644
index 0000000..5c2fcf1
--- /dev/null
+++ b/include/asm-ia64/sn/shub_mmr.h
@@ -0,0 +1,441 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUB_MMR_H
+#define _ASM_IA64_SN_SHUB_MMR_H
+
+/* ==================================================================== */
+/* Register "SH_IPI_INT" */
+/* SHub Inter-Processor Interrupt Registers */
+/* ==================================================================== */
+#define SH1_IPI_INT 0x0000000110000380
+#define SH2_IPI_INT 0x0000000010000380
+
+/* SH_IPI_INT_TYPE */
+/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
+#define SH_IPI_INT_TYPE_SHFT 0
+#define SH_IPI_INT_TYPE_MASK 0x0000000000000007
+
+/* SH_IPI_INT_AGT */
+/* Description: Agent, must be 0 for SHub */
+#define SH_IPI_INT_AGT_SHFT 3
+#define SH_IPI_INT_AGT_MASK 0x0000000000000008
+
+/* SH_IPI_INT_PID */
+/* Description: Processor ID, same setting as on targeted McKinley */
+#define SH_IPI_INT_PID_SHFT 4
+#define SH_IPI_INT_PID_MASK 0x00000000000ffff0
+
+/* SH_IPI_INT_BASE */
+/* Description: Optional interrupt vector area, 2MB aligned */
+#define SH_IPI_INT_BASE_SHFT 21
+#define SH_IPI_INT_BASE_MASK 0x0003ffffffe00000
+
+/* SH_IPI_INT_IDX */
+/* Description: Targeted McKinley interrupt vector */
+#define SH_IPI_INT_IDX_SHFT 52
+#define SH_IPI_INT_IDX_MASK 0x0ff0000000000000
+
+/* SH_IPI_INT_SEND */
+/* Description: Send Interrupt Message to PI, This generates a puls */
+#define SH_IPI_INT_SEND_SHFT 63
+#define SH_IPI_INT_SEND_MASK 0x8000000000000000
+
+/* ==================================================================== */
+/* Register "SH_EVENT_OCCURRED" */
+/* SHub Interrupt Event Occurred */
+/* ==================================================================== */
+#define SH1_EVENT_OCCURRED 0x0000000110010000
+#define SH1_EVENT_OCCURRED_ALIAS 0x0000000110010008
+#define SH2_EVENT_OCCURRED 0x0000000010010000
+#define SH2_EVENT_OCCURRED_ALIAS 0x0000000010010008
+
+/* ==================================================================== */
+/* Register "SH_PI_CAM_CONTROL" */
+/* CRB CAM MMR Access Control */
+/* ==================================================================== */
+#define SH1_PI_CAM_CONTROL 0x0000000120050300
+
+/* ==================================================================== */
+/* Register "SH_SHUB_ID" */
+/* SHub ID Number */
+/* ==================================================================== */
+#define SH1_SHUB_ID 0x0000000110060580
+#define SH1_SHUB_ID_REVISION_SHFT 28
+#define SH1_SHUB_ID_REVISION_MASK 0x00000000f0000000
+
+/* ==================================================================== */
+/* Register "SH_RTC" */
+/* Real-time Clock */
+/* ==================================================================== */
+#define SH1_RTC 0x00000001101c0000
+#define SH2_RTC 0x00000002101c0000
+#define SH_RTC_MASK 0x007fffffffffffff
+
+/* ==================================================================== */
+/* Register "SH_PIO_WRITE_STATUS_0|1" */
+/* PIO Write Status for CPU 0 & 1 */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0 0x0000000120070200
+#define SH1_PIO_WRITE_STATUS_1 0x0000000120070280
+#define SH2_PIO_WRITE_STATUS_0 0x0000000020070200
+#define SH2_PIO_WRITE_STATUS_1 0x0000000020070280
+#define SH2_PIO_WRITE_STATUS_2 0x0000000020070300
+#define SH2_PIO_WRITE_STATUS_3 0x0000000020070380
+
+/* SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK */
+/* Description: Deadlock response detected */
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK 0x0000000000000002
+
+/* SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT */
+/* Description: Count of currently pending PIO writes */
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK 0x3f00000000000000
+
+/* ==================================================================== */
+/* Register "SH_PIO_WRITE_STATUS_0_ALIAS" */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0_ALIAS 0x0000000120070208
+#define SH2_PIO_WRITE_STATUS_0_ALIAS 0x0000000020070208
+
+/* ==================================================================== */
+/* Register "SH_EVENT_OCCURRED" */
+/* SHub Interrupt Event Occurred */
+/* ==================================================================== */
+/* SH_EVENT_OCCURRED_UART_INT */
+/* Description: Pending Junk Bus UART Interrupt */
+#define SH_EVENT_OCCURRED_UART_INT_SHFT 20
+#define SH_EVENT_OCCURRED_UART_INT_MASK 0x0000000000100000
+
+/* SH_EVENT_OCCURRED_IPI_INT */
+/* Description: Pending IPI Interrupt */
+#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28
+#define SH_EVENT_OCCURRED_IPI_INT_MASK 0x0000000010000000
+
+/* SH_EVENT_OCCURRED_II_INT0 */
+/* Description: Pending II 0 Interrupt */
+#define SH_EVENT_OCCURRED_II_INT0_SHFT 29
+#define SH_EVENT_OCCURRED_II_INT0_MASK 0x0000000020000000
+
+/* SH_EVENT_OCCURRED_II_INT1 */
+/* Description: Pending II 1 Interrupt */
+#define SH_EVENT_OCCURRED_II_INT1_SHFT 30
+#define SH_EVENT_OCCURRED_II_INT1_MASK 0x0000000040000000
+
+/* ==================================================================== */
+/* LEDS */
+/* ==================================================================== */
+#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL
+#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL
+#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL
+#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL
+
+#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL
+#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL
+#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL
+#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL
+
+/* ==================================================================== */
+/* Register "SH1_PTC_0" */
+/* Puge Translation Cache Message Configuration Information */
+/* ==================================================================== */
+#define SH1_PTC_0 0x00000001101a0000
+
+/* SH1_PTC_0_A */
+/* Description: Type */
+#define SH1_PTC_0_A_SHFT 0
+
+/* SH1_PTC_0_PS */
+/* Description: Page Size */
+#define SH1_PTC_0_PS_SHFT 2
+
+/* SH1_PTC_0_RID */
+/* Description: Region ID */
+#define SH1_PTC_0_RID_SHFT 8
+
+/* SH1_PTC_0_START */
+/* Description: Start */
+#define SH1_PTC_0_START_SHFT 63
+
+/* ==================================================================== */
+/* Register "SH1_PTC_1" */
+/* Puge Translation Cache Message Configuration Information */
+/* ==================================================================== */
+#define SH1_PTC_1 0x00000001101a0080
+
+/* SH1_PTC_1_START */
+/* Description: PTC_1 Start */
+#define SH1_PTC_1_START_SHFT 63
+
+
+/* ==================================================================== */
+/* Register "SH2_PTC" */
+/* Puge Translation Cache Message Configuration Information */
+/* ==================================================================== */
+#define SH2_PTC 0x0000000170000000
+
+/* SH2_PTC_A */
+/* Description: Type */
+#define SH2_PTC_A_SHFT 0
+
+/* SH2_PTC_PS */
+/* Description: Page Size */
+#define SH2_PTC_PS_SHFT 2
+
+/* SH2_PTC_RID */
+/* Description: Region ID */
+#define SH2_PTC_RID_SHFT 4
+
+/* SH2_PTC_START */
+/* Description: Start */
+#define SH2_PTC_START_SHFT 63
+
+/* SH2_PTC_ADDR_RID */
+/* Description: Region ID */
+#define SH2_PTC_ADDR_SHFT 4
+#define SH2_PTC_ADDR_MASK 0x1ffffffffffff000
+
+/* ==================================================================== */
+/* Register "SH_RTC1_INT_CONFIG" */
+/* SHub RTC 1 Interrupt Config Registers */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_CONFIG 0x0000000110001480
+#define SH2_RTC1_INT_CONFIG 0x0000000010001480
+#define SH_RTC1_INT_CONFIG_MASK 0x0ff3ffffffefffff
+#define SH_RTC1_INT_CONFIG_INIT 0x0000000000000000
+
+/* SH_RTC1_INT_CONFIG_TYPE */
+/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
+#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0
+#define SH_RTC1_INT_CONFIG_TYPE_MASK 0x0000000000000007
+
+/* SH_RTC1_INT_CONFIG_AGT */
+/* Description: Agent, must be 0 for SHub */
+#define SH_RTC1_INT_CONFIG_AGT_SHFT 3
+#define SH_RTC1_INT_CONFIG_AGT_MASK 0x0000000000000008
+
+/* SH_RTC1_INT_CONFIG_PID */
+/* Description: Processor ID, same setting as on targeted McKinley */
+#define SH_RTC1_INT_CONFIG_PID_SHFT 4
+#define SH_RTC1_INT_CONFIG_PID_MASK 0x00000000000ffff0
+
+/* SH_RTC1_INT_CONFIG_BASE */
+/* Description: Optional interrupt vector area, 2MB aligned */
+#define SH_RTC1_INT_CONFIG_BASE_SHFT 21
+#define SH_RTC1_INT_CONFIG_BASE_MASK 0x0003ffffffe00000
+
+/* SH_RTC1_INT_CONFIG_IDX */
+/* Description: Targeted McKinley interrupt vector */
+#define SH_RTC1_INT_CONFIG_IDX_SHFT 52
+#define SH_RTC1_INT_CONFIG_IDX_MASK 0x0ff0000000000000
+
+/* ==================================================================== */
+/* Register "SH_RTC1_INT_ENABLE" */
+/* SHub RTC 1 Interrupt Enable Registers */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_ENABLE 0x0000000110001500
+#define SH2_RTC1_INT_ENABLE 0x0000000010001500
+#define SH_RTC1_INT_ENABLE_MASK 0x0000000000000001
+#define SH_RTC1_INT_ENABLE_INIT 0x0000000000000000
+
+/* SH_RTC1_INT_ENABLE_RTC1_ENABLE */
+/* Description: Enable RTC 1 Interrupt */
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK 0x0000000000000001
+
+/* ==================================================================== */
+/* Register "SH_RTC2_INT_CONFIG" */
+/* SHub RTC 2 Interrupt Config Registers */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_CONFIG 0x0000000110001580
+#define SH2_RTC2_INT_CONFIG 0x0000000010001580
+#define SH_RTC2_INT_CONFIG_MASK 0x0ff3ffffffefffff
+#define SH_RTC2_INT_CONFIG_INIT 0x0000000000000000
+
+/* SH_RTC2_INT_CONFIG_TYPE */
+/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
+#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0
+#define SH_RTC2_INT_CONFIG_TYPE_MASK 0x0000000000000007
+
+/* SH_RTC2_INT_CONFIG_AGT */
+/* Description: Agent, must be 0 for SHub */
+#define SH_RTC2_INT_CONFIG_AGT_SHFT 3
+#define SH_RTC2_INT_CONFIG_AGT_MASK 0x0000000000000008
+
+/* SH_RTC2_INT_CONFIG_PID */
+/* Description: Processor ID, same setting as on targeted McKinley */
+#define SH_RTC2_INT_CONFIG_PID_SHFT 4
+#define SH_RTC2_INT_CONFIG_PID_MASK 0x00000000000ffff0
+
+/* SH_RTC2_INT_CONFIG_BASE */
+/* Description: Optional interrupt vector area, 2MB aligned */
+#define SH_RTC2_INT_CONFIG_BASE_SHFT 21
+#define SH_RTC2_INT_CONFIG_BASE_MASK 0x0003ffffffe00000
+
+/* SH_RTC2_INT_CONFIG_IDX */
+/* Description: Targeted McKinley interrupt vector */
+#define SH_RTC2_INT_CONFIG_IDX_SHFT 52
+#define SH_RTC2_INT_CONFIG_IDX_MASK 0x0ff0000000000000
+
+/* ==================================================================== */
+/* Register "SH_RTC2_INT_ENABLE" */
+/* SHub RTC 2 Interrupt Enable Registers */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_ENABLE 0x0000000110001600
+#define SH2_RTC2_INT_ENABLE 0x0000000010001600
+#define SH_RTC2_INT_ENABLE_MASK 0x0000000000000001
+#define SH_RTC2_INT_ENABLE_INIT 0x0000000000000000
+
+/* SH_RTC2_INT_ENABLE_RTC2_ENABLE */
+/* Description: Enable RTC 2 Interrupt */
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK 0x0000000000000001
+
+/* ==================================================================== */
+/* Register "SH_RTC3_INT_CONFIG" */
+/* SHub RTC 3 Interrupt Config Registers */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_CONFIG 0x0000000110001680
+#define SH2_RTC3_INT_CONFIG 0x0000000010001680
+#define SH_RTC3_INT_CONFIG_MASK 0x0ff3ffffffefffff
+#define SH_RTC3_INT_CONFIG_INIT 0x0000000000000000
+
+/* SH_RTC3_INT_CONFIG_TYPE */
+/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
+#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0
+#define SH_RTC3_INT_CONFIG_TYPE_MASK 0x0000000000000007
+
+/* SH_RTC3_INT_CONFIG_AGT */
+/* Description: Agent, must be 0 for SHub */
+#define SH_RTC3_INT_CONFIG_AGT_SHFT 3
+#define SH_RTC3_INT_CONFIG_AGT_MASK 0x0000000000000008
+
+/* SH_RTC3_INT_CONFIG_PID */
+/* Description: Processor ID, same setting as on targeted McKinley */
+#define SH_RTC3_INT_CONFIG_PID_SHFT 4
+#define SH_RTC3_INT_CONFIG_PID_MASK 0x00000000000ffff0
+
+/* SH_RTC3_INT_CONFIG_BASE */
+/* Description: Optional interrupt vector area, 2MB aligned */
+#define SH_RTC3_INT_CONFIG_BASE_SHFT 21
+#define SH_RTC3_INT_CONFIG_BASE_MASK 0x0003ffffffe00000
+
+/* SH_RTC3_INT_CONFIG_IDX */
+/* Description: Targeted McKinley interrupt vector */
+#define SH_RTC3_INT_CONFIG_IDX_SHFT 52
+#define SH_RTC3_INT_CONFIG_IDX_MASK 0x0ff0000000000000
+
+/* ==================================================================== */
+/* Register "SH_RTC3_INT_ENABLE" */
+/* SHub RTC 3 Interrupt Enable Registers */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_ENABLE 0x0000000110001700
+#define SH2_RTC3_INT_ENABLE 0x0000000010001700
+#define SH_RTC3_INT_ENABLE_MASK 0x0000000000000001
+#define SH_RTC3_INT_ENABLE_INIT 0x0000000000000000
+
+/* SH_RTC3_INT_ENABLE_RTC3_ENABLE */
+/* Description: Enable RTC 3 Interrupt */
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK 0x0000000000000001
+
+/* SH_EVENT_OCCURRED_RTC1_INT */
+/* Description: Pending RTC 1 Interrupt */
+#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24
+#define SH_EVENT_OCCURRED_RTC1_INT_MASK 0x0000000001000000
+
+/* SH_EVENT_OCCURRED_RTC2_INT */
+/* Description: Pending RTC 2 Interrupt */
+#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25
+#define SH_EVENT_OCCURRED_RTC2_INT_MASK 0x0000000002000000
+
+/* SH_EVENT_OCCURRED_RTC3_INT */
+/* Description: Pending RTC 3 Interrupt */
+#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26
+#define SH_EVENT_OCCURRED_RTC3_INT_MASK 0x0000000004000000
+
+/* ==================================================================== */
+/* Register "SH_INT_CMPB" */
+/* RTC Compare Value for Processor B */
+/* ==================================================================== */
+
+#define SH1_INT_CMPB 0x00000001101b0080
+#define SH2_INT_CMPB 0x00000000101b0080
+#define SH_INT_CMPB_MASK 0x007fffffffffffff
+#define SH_INT_CMPB_INIT 0x0000000000000000
+
+/* SH_INT_CMPB_REAL_TIME_CMPB */
+/* Description: Real Time Clock Compare */
+#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
+#define SH_INT_CMPB_REAL_TIME_CMPB_MASK 0x007fffffffffffff
+
+/* ==================================================================== */
+/* Register "SH_INT_CMPC" */
+/* RTC Compare Value for Processor C */
+/* ==================================================================== */
+
+#define SH1_INT_CMPC 0x00000001101b0100
+#define SH2_INT_CMPC 0x00000000101b0100
+#define SH_INT_CMPC_MASK 0x007fffffffffffff
+#define SH_INT_CMPC_INIT 0x0000000000000000
+
+/* SH_INT_CMPC_REAL_TIME_CMPC */
+/* Description: Real Time Clock Compare */
+#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
+#define SH_INT_CMPC_REAL_TIME_CMPC_MASK 0x007fffffffffffff
+
+/* ==================================================================== */
+/* Register "SH_INT_CMPD" */
+/* RTC Compare Value for Processor D */
+/* ==================================================================== */
+
+#define SH1_INT_CMPD 0x00000001101b0180
+#define SH2_INT_CMPD 0x00000000101b0180
+#define SH_INT_CMPD_MASK 0x007fffffffffffff
+#define SH_INT_CMPD_INIT 0x0000000000000000
+
+/* SH_INT_CMPD_REAL_TIME_CMPD */
+/* Description: Real Time Clock Compare */
+#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
+#define SH_INT_CMPD_REAL_TIME_CMPD_MASK 0x007fffffffffffff
+
+
+/* ==================================================================== */
+/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
+/* and SHUB2 that it makes sense to define a geberic name for the MMR. */
+/* It is acceptible to use (for example) SH_IPI_INT to reference the */
+/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */
+/* on the type of the SHUB. Do not use these #defines in performance */
+/* critical code or loops - there is a small performance penalty. */
+/* ==================================================================== */
+#define shubmmr(a,b) (is_shub2() ? a##2_##b : a##1_##b)
+
+#define SH_REAL_JUNK_BUS_LED0 shubmmr(SH, REAL_JUNK_BUS_LED0)
+#define SH_IPI_INT shubmmr(SH, IPI_INT)
+#define SH_EVENT_OCCURRED shubmmr(SH, EVENT_OCCURRED)
+#define SH_EVENT_OCCURRED_ALIAS shubmmr(SH, EVENT_OCCURRED_ALIAS)
+#define SH_RTC shubmmr(SH, RTC)
+#define SH_RTC1_INT_CONFIG shubmmr(SH, RTC1_INT_CONFIG)
+#define SH_RTC1_INT_ENABLE shubmmr(SH, RTC1_INT_ENABLE)
+#define SH_RTC2_INT_CONFIG shubmmr(SH, RTC2_INT_CONFIG)
+#define SH_RTC2_INT_ENABLE shubmmr(SH, RTC2_INT_ENABLE)
+#define SH_RTC3_INT_CONFIG shubmmr(SH, RTC3_INT_CONFIG)
+#define SH_RTC3_INT_ENABLE shubmmr(SH, RTC3_INT_ENABLE)
+#define SH_INT_CMPB shubmmr(SH, INT_CMPB)
+#define SH_INT_CMPC shubmmr(SH, INT_CMPC)
+#define SH_INT_CMPD shubmmr(SH, INT_CMPD)
+
+#endif /* _ASM_IA64_SN_SHUB_MMR_H */
diff --git a/include/asm-ia64/sn/shubio.h b/include/asm-ia64/sn/shubio.h
new file mode 100644
index 0000000..fbd880e
--- /dev/null
+++ b/include/asm-ia64/sn/shubio.h
@@ -0,0 +1,3476 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUBIO_H
+#define _ASM_IA64_SN_SHUBIO_H
+
+#define HUB_WIDGET_ID_MAX 0xf
+#define IIO_NUM_ITTES 7
+#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1)
+
+#define IIO_WID 0x00400000 /* Crosstalk Widget Identification */
+ /* This register is also accessible from
+ * Crosstalk at address 0x0. */
+#define IIO_WSTAT 0x00400008 /* Crosstalk Widget Status */
+#define IIO_WCR 0x00400020 /* Crosstalk Widget Control Register */
+#define IIO_ILAPR 0x00400100 /* IO Local Access Protection Register */
+#define IIO_ILAPO 0x00400108 /* IO Local Access Protection Override */
+#define IIO_IOWA 0x00400110 /* IO Outbound Widget Access */
+#define IIO_IIWA 0x00400118 /* IO Inbound Widget Access */
+#define IIO_IIDEM 0x00400120 /* IO Inbound Device Error Mask */
+#define IIO_ILCSR 0x00400128 /* IO LLP Control and Status Register */
+#define IIO_ILLR 0x00400130 /* IO LLP Log Register */
+#define IIO_IIDSR 0x00400138 /* IO Interrupt Destination */
+
+#define IIO_IGFX0 0x00400140 /* IO Graphics Node-Widget Map 0 */
+#define IIO_IGFX1 0x00400148 /* IO Graphics Node-Widget Map 1 */
+
+#define IIO_ISCR0 0x00400150 /* IO Scratch Register 0 */
+#define IIO_ISCR1 0x00400158 /* IO Scratch Register 1 */
+
+#define IIO_ITTE1 0x00400160 /* IO Translation Table Entry 1 */
+#define IIO_ITTE2 0x00400168 /* IO Translation Table Entry 2 */
+#define IIO_ITTE3 0x00400170 /* IO Translation Table Entry 3 */
+#define IIO_ITTE4 0x00400178 /* IO Translation Table Entry 4 */
+#define IIO_ITTE5 0x00400180 /* IO Translation Table Entry 5 */
+#define IIO_ITTE6 0x00400188 /* IO Translation Table Entry 6 */
+#define IIO_ITTE7 0x00400190 /* IO Translation Table Entry 7 */
+
+#define IIO_IPRB0 0x00400198 /* IO PRB Entry 0 */
+#define IIO_IPRB8 0x004001A0 /* IO PRB Entry 8 */
+#define IIO_IPRB9 0x004001A8 /* IO PRB Entry 9 */
+#define IIO_IPRBA 0x004001B0 /* IO PRB Entry A */
+#define IIO_IPRBB 0x004001B8 /* IO PRB Entry B */
+#define IIO_IPRBC 0x004001C0 /* IO PRB Entry C */
+#define IIO_IPRBD 0x004001C8 /* IO PRB Entry D */
+#define IIO_IPRBE 0x004001D0 /* IO PRB Entry E */
+#define IIO_IPRBF 0x004001D8 /* IO PRB Entry F */
+
+#define IIO_IXCC 0x004001E0 /* IO Crosstalk Credit Count Timeout */
+#define IIO_IMEM 0x004001E8 /* IO Miscellaneous Error Mask */
+#define IIO_IXTT 0x004001F0 /* IO Crosstalk Timeout Threshold */
+#define IIO_IECLR 0x004001F8 /* IO Error Clear Register */
+#define IIO_IBCR 0x00400200 /* IO BTE Control Register */
+
+#define IIO_IXSM 0x00400208 /* IO Crosstalk Spurious Message */
+#define IIO_IXSS 0x00400210 /* IO Crosstalk Spurious Sideband */
+
+#define IIO_ILCT 0x00400218 /* IO LLP Channel Test */
+
+#define IIO_IIEPH1 0x00400220 /* IO Incoming Error Packet Header, Part 1 */
+#define IIO_IIEPH2 0x00400228 /* IO Incoming Error Packet Header, Part 2 */
+
+
+#define IIO_ISLAPR 0x00400230 /* IO SXB Local Access Protection Regster */
+#define IIO_ISLAPO 0x00400238 /* IO SXB Local Access Protection Override */
+
+#define IIO_IWI 0x00400240 /* IO Wrapper Interrupt Register */
+#define IIO_IWEL 0x00400248 /* IO Wrapper Error Log Register */
+#define IIO_IWC 0x00400250 /* IO Wrapper Control Register */
+#define IIO_IWS 0x00400258 /* IO Wrapper Status Register */
+#define IIO_IWEIM 0x00400260 /* IO Wrapper Error Interrupt Masking Register */
+
+#define IIO_IPCA 0x00400300 /* IO PRB Counter Adjust */
+
+#define IIO_IPRTE0_A 0x00400308 /* IO PIO Read Address Table Entry 0, Part A */
+#define IIO_IPRTE1_A 0x00400310 /* IO PIO Read Address Table Entry 1, Part A */
+#define IIO_IPRTE2_A 0x00400318 /* IO PIO Read Address Table Entry 2, Part A */
+#define IIO_IPRTE3_A 0x00400320 /* IO PIO Read Address Table Entry 3, Part A */
+#define IIO_IPRTE4_A 0x00400328 /* IO PIO Read Address Table Entry 4, Part A */
+#define IIO_IPRTE5_A 0x00400330 /* IO PIO Read Address Table Entry 5, Part A */
+#define IIO_IPRTE6_A 0x00400338 /* IO PIO Read Address Table Entry 6, Part A */
+#define IIO_IPRTE7_A 0x00400340 /* IO PIO Read Address Table Entry 7, Part A */
+
+#define IIO_IPRTE0_B 0x00400348 /* IO PIO Read Address Table Entry 0, Part B */
+#define IIO_IPRTE1_B 0x00400350 /* IO PIO Read Address Table Entry 1, Part B */
+#define IIO_IPRTE2_B 0x00400358 /* IO PIO Read Address Table Entry 2, Part B */
+#define IIO_IPRTE3_B 0x00400360 /* IO PIO Read Address Table Entry 3, Part B */
+#define IIO_IPRTE4_B 0x00400368 /* IO PIO Read Address Table Entry 4, Part B */
+#define IIO_IPRTE5_B 0x00400370 /* IO PIO Read Address Table Entry 5, Part B */
+#define IIO_IPRTE6_B 0x00400378 /* IO PIO Read Address Table Entry 6, Part B */
+#define IIO_IPRTE7_B 0x00400380 /* IO PIO Read Address Table Entry 7, Part B */
+
+#define IIO_IPDR 0x00400388 /* IO PIO Deallocation Register */
+#define IIO_ICDR 0x00400390 /* IO CRB Entry Deallocation Register */
+#define IIO_IFDR 0x00400398 /* IO IOQ FIFO Depth Register */
+#define IIO_IIAP 0x004003A0 /* IO IIQ Arbitration Parameters */
+#define IIO_ICMR 0x004003A8 /* IO CRB Management Register */
+#define IIO_ICCR 0x004003B0 /* IO CRB Control Register */
+#define IIO_ICTO 0x004003B8 /* IO CRB Timeout */
+#define IIO_ICTP 0x004003C0 /* IO CRB Timeout Prescalar */
+
+#define IIO_ICRB0_A 0x00400400 /* IO CRB Entry 0_A */
+#define IIO_ICRB0_B 0x00400408 /* IO CRB Entry 0_B */
+#define IIO_ICRB0_C 0x00400410 /* IO CRB Entry 0_C */
+#define IIO_ICRB0_D 0x00400418 /* IO CRB Entry 0_D */
+#define IIO_ICRB0_E 0x00400420 /* IO CRB Entry 0_E */
+
+#define IIO_ICRB1_A 0x00400430 /* IO CRB Entry 1_A */
+#define IIO_ICRB1_B 0x00400438 /* IO CRB Entry 1_B */
+#define IIO_ICRB1_C 0x00400440 /* IO CRB Entry 1_C */
+#define IIO_ICRB1_D 0x00400448 /* IO CRB Entry 1_D */
+#define IIO_ICRB1_E 0x00400450 /* IO CRB Entry 1_E */
+
+#define IIO_ICRB2_A 0x00400460 /* IO CRB Entry 2_A */
+#define IIO_ICRB2_B 0x00400468 /* IO CRB Entry 2_B */
+#define IIO_ICRB2_C 0x00400470 /* IO CRB Entry 2_C */
+#define IIO_ICRB2_D 0x00400478 /* IO CRB Entry 2_D */
+#define IIO_ICRB2_E 0x00400480 /* IO CRB Entry 2_E */
+
+#define IIO_ICRB3_A 0x00400490 /* IO CRB Entry 3_A */
+#define IIO_ICRB3_B 0x00400498 /* IO CRB Entry 3_B */
+#define IIO_ICRB3_C 0x004004a0 /* IO CRB Entry 3_C */
+#define IIO_ICRB3_D 0x004004a8 /* IO CRB Entry 3_D */
+#define IIO_ICRB3_E 0x004004b0 /* IO CRB Entry 3_E */
+
+#define IIO_ICRB4_A 0x004004c0 /* IO CRB Entry 4_A */
+#define IIO_ICRB4_B 0x004004c8 /* IO CRB Entry 4_B */
+#define IIO_ICRB4_C 0x004004d0 /* IO CRB Entry 4_C */
+#define IIO_ICRB4_D 0x004004d8 /* IO CRB Entry 4_D */
+#define IIO_ICRB4_E 0x004004e0 /* IO CRB Entry 4_E */
+
+#define IIO_ICRB5_A 0x004004f0 /* IO CRB Entry 5_A */
+#define IIO_ICRB5_B 0x004004f8 /* IO CRB Entry 5_B */
+#define IIO_ICRB5_C 0x00400500 /* IO CRB Entry 5_C */
+#define IIO_ICRB5_D 0x00400508 /* IO CRB Entry 5_D */
+#define IIO_ICRB5_E 0x00400510 /* IO CRB Entry 5_E */
+
+#define IIO_ICRB6_A 0x00400520 /* IO CRB Entry 6_A */
+#define IIO_ICRB6_B 0x00400528 /* IO CRB Entry 6_B */
+#define IIO_ICRB6_C 0x00400530 /* IO CRB Entry 6_C */
+#define IIO_ICRB6_D 0x00400538 /* IO CRB Entry 6_D */
+#define IIO_ICRB6_E 0x00400540 /* IO CRB Entry 6_E */
+
+#define IIO_ICRB7_A 0x00400550 /* IO CRB Entry 7_A */
+#define IIO_ICRB7_B 0x00400558 /* IO CRB Entry 7_B */
+#define IIO_ICRB7_C 0x00400560 /* IO CRB Entry 7_C */
+#define IIO_ICRB7_D 0x00400568 /* IO CRB Entry 7_D */
+#define IIO_ICRB7_E 0x00400570 /* IO CRB Entry 7_E */
+
+#define IIO_ICRB8_A 0x00400580 /* IO CRB Entry 8_A */
+#define IIO_ICRB8_B 0x00400588 /* IO CRB Entry 8_B */
+#define IIO_ICRB8_C 0x00400590 /* IO CRB Entry 8_C */
+#define IIO_ICRB8_D 0x00400598 /* IO CRB Entry 8_D */
+#define IIO_ICRB8_E 0x004005a0 /* IO CRB Entry 8_E */
+
+#define IIO_ICRB9_A 0x004005b0 /* IO CRB Entry 9_A */
+#define IIO_ICRB9_B 0x004005b8 /* IO CRB Entry 9_B */
+#define IIO_ICRB9_C 0x004005c0 /* IO CRB Entry 9_C */
+#define IIO_ICRB9_D 0x004005c8 /* IO CRB Entry 9_D */
+#define IIO_ICRB9_E 0x004005d0 /* IO CRB Entry 9_E */
+
+#define IIO_ICRBA_A 0x004005e0 /* IO CRB Entry A_A */
+#define IIO_ICRBA_B 0x004005e8 /* IO CRB Entry A_B */
+#define IIO_ICRBA_C 0x004005f0 /* IO CRB Entry A_C */
+#define IIO_ICRBA_D 0x004005f8 /* IO CRB Entry A_D */
+#define IIO_ICRBA_E 0x00400600 /* IO CRB Entry A_E */
+
+#define IIO_ICRBB_A 0x00400610 /* IO CRB Entry B_A */
+#define IIO_ICRBB_B 0x00400618 /* IO CRB Entry B_B */
+#define IIO_ICRBB_C 0x00400620 /* IO CRB Entry B_C */
+#define IIO_ICRBB_D 0x00400628 /* IO CRB Entry B_D */
+#define IIO_ICRBB_E 0x00400630 /* IO CRB Entry B_E */
+
+#define IIO_ICRBC_A 0x00400640 /* IO CRB Entry C_A */
+#define IIO_ICRBC_B 0x00400648 /* IO CRB Entry C_B */
+#define IIO_ICRBC_C 0x00400650 /* IO CRB Entry C_C */
+#define IIO_ICRBC_D 0x00400658 /* IO CRB Entry C_D */
+#define IIO_ICRBC_E 0x00400660 /* IO CRB Entry C_E */
+
+#define IIO_ICRBD_A 0x00400670 /* IO CRB Entry D_A */
+#define IIO_ICRBD_B 0x00400678 /* IO CRB Entry D_B */
+#define IIO_ICRBD_C 0x00400680 /* IO CRB Entry D_C */
+#define IIO_ICRBD_D 0x00400688 /* IO CRB Entry D_D */
+#define IIO_ICRBD_E 0x00400690 /* IO CRB Entry D_E */
+
+#define IIO_ICRBE_A 0x004006a0 /* IO CRB Entry E_A */
+#define IIO_ICRBE_B 0x004006a8 /* IO CRB Entry E_B */
+#define IIO_ICRBE_C 0x004006b0 /* IO CRB Entry E_C */
+#define IIO_ICRBE_D 0x004006b8 /* IO CRB Entry E_D */
+#define IIO_ICRBE_E 0x004006c0 /* IO CRB Entry E_E */
+
+#define IIO_ICSML 0x00400700 /* IO CRB Spurious Message Low */
+#define IIO_ICSMM 0x00400708 /* IO CRB Spurious Message Middle */
+#define IIO_ICSMH 0x00400710 /* IO CRB Spurious Message High */
+
+#define IIO_IDBSS 0x00400718 /* IO Debug Submenu Select */
+
+#define IIO_IBLS0 0x00410000 /* IO BTE Length Status 0 */
+#define IIO_IBSA0 0x00410008 /* IO BTE Source Address 0 */
+#define IIO_IBDA0 0x00410010 /* IO BTE Destination Address 0 */
+#define IIO_IBCT0 0x00410018 /* IO BTE Control Terminate 0 */
+#define IIO_IBNA0 0x00410020 /* IO BTE Notification Address 0 */
+#define IIO_IBIA0 0x00410028 /* IO BTE Interrupt Address 0 */
+#define IIO_IBLS1 0x00420000 /* IO BTE Length Status 1 */
+#define IIO_IBSA1 0x00420008 /* IO BTE Source Address 1 */
+#define IIO_IBDA1 0x00420010 /* IO BTE Destination Address 1 */
+#define IIO_IBCT1 0x00420018 /* IO BTE Control Terminate 1 */
+#define IIO_IBNA1 0x00420020 /* IO BTE Notification Address 1 */
+#define IIO_IBIA1 0x00420028 /* IO BTE Interrupt Address 1 */
+
+#define IIO_IPCR 0x00430000 /* IO Performance Control */
+#define IIO_IPPR 0x00430008 /* IO Performance Profiling */
+
+
+/************************************************************************
+ * *
+ * Description: This register echoes some information from the *
+ * LB_REV_ID register. It is available through Crosstalk as described *
+ * above. The REV_NUM and MFG_NUM fields receive their values from *
+ * the REVISION and MANUFACTURER fields in the LB_REV_ID register. *
+ * The PART_NUM field's value is the Crosstalk device ID number that *
+ * Steve Miller assigned to the SHub chip. *
+ * *
+ ************************************************************************/
+
+typedef union ii_wid_u {
+ uint64_t ii_wid_regval;
+ struct {
+ uint64_t w_rsvd_1 : 1;
+ uint64_t w_mfg_num : 11;
+ uint64_t w_part_num : 16;
+ uint64_t w_rev_num : 4;
+ uint64_t w_rsvd : 32;
+ } ii_wid_fld_s;
+} ii_wid_u_t;
+
+
+/************************************************************************
+ * *
+ * The fields in this register are set upon detection of an error *
+ * and cleared by various mechanisms, as explained in the *
+ * description. *
+ * *
+ ************************************************************************/
+
+typedef union ii_wstat_u {
+ uint64_t ii_wstat_regval;
+ struct {
+ uint64_t w_pending : 4;
+ uint64_t w_xt_crd_to : 1;
+ uint64_t w_xt_tail_to : 1;
+ uint64_t w_rsvd_3 : 3;
+ uint64_t w_tx_mx_rty : 1;
+ uint64_t w_rsvd_2 : 6;
+ uint64_t w_llp_tx_cnt : 8;
+ uint64_t w_rsvd_1 : 8;
+ uint64_t w_crazy : 1;
+ uint64_t w_rsvd : 31;
+ } ii_wstat_fld_s;
+} ii_wstat_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: This is a read-write enabled register. It controls *
+ * various aspects of the Crosstalk flow control. *
+ * *
+ ************************************************************************/
+
+typedef union ii_wcr_u {
+ uint64_t ii_wcr_regval;
+ struct {
+ uint64_t w_wid : 4;
+ uint64_t w_tag : 1;
+ uint64_t w_rsvd_1 : 8;
+ uint64_t w_dst_crd : 3;
+ uint64_t w_f_bad_pkt : 1;
+ uint64_t w_dir_con : 1;
+ uint64_t w_e_thresh : 5;
+ uint64_t w_rsvd : 41;
+ } ii_wcr_fld_s;
+} ii_wcr_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: This register's value is a bit vector that guards *
+ * access to local registers within the II as well as to external *
+ * Crosstalk widgets. Each bit in the register corresponds to a *
+ * particular region in the system; a region consists of one, two or *
+ * four nodes (depending on the value of the REGION_SIZE field in the *
+ * LB_REV_ID register, which is documented in Section 8.3.1.1). The *
+ * protection provided by this register applies to PIO read *
+ * operations as well as PIO write operations. The II will perform a *
+ * PIO read or write request only if the bit for the requestor's *
+ * region is set; otherwise, the II will not perform the requested *
+ * operation and will return an error response. When a PIO read or *
+ * write request targets an external Crosstalk widget, then not only *
+ * must the bit for the requestor's region be set in the ILAPR, but *
+ * also the target widget's bit in the IOWA register must be set in *
+ * order for the II to perform the requested operation; otherwise, *
+ * the II will return an error response. Hence, the protection *
+ * provided by the IOWA register supplements the protection provided *
+ * by the ILAPR for requests that target external Crosstalk widgets. *
+ * This register itself can be accessed only by the nodes whose *
+ * region ID bits are enabled in this same register. It can also be *
+ * accessed through the IAlias space by the local processors. *
+ * The reset value of this register allows access by all nodes. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ilapr_u {
+ uint64_t ii_ilapr_regval;
+ struct {
+ uint64_t i_region : 64;
+ } ii_ilapr_fld_s;
+} ii_ilapr_u_t;
+
+
+
+
+/************************************************************************
+ * *
+ * Description: A write to this register of the 64-bit value *
+ * "SGIrules" in ASCII, will cause the bit in the ILAPR register *
+ * corresponding to the region of the requestor to be set (allow *
+ * access). A write of any other value will be ignored. Access *
+ * protection for this register is "SGIrules". *
+ * This register can also be accessed through the IAlias space. *
+ * However, this access will not change the access permissions in the *
+ * ILAPR. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ilapo_u {
+ uint64_t ii_ilapo_regval;
+ struct {
+ uint64_t i_io_ovrride : 64;
+ } ii_ilapo_fld_s;
+} ii_ilapo_u_t;
+
+
+
+/************************************************************************
+ * *
+ * This register qualifies all the PIO and Graphics writes launched *
+ * from the SHUB towards a widget. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iowa_u {
+ uint64_t ii_iowa_regval;
+ struct {
+ uint64_t i_w0_oac : 1;
+ uint64_t i_rsvd_1 : 7;
+ uint64_t i_wx_oac : 8;
+ uint64_t i_rsvd : 48;
+ } ii_iowa_fld_s;
+} ii_iowa_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: This register qualifies all the requests launched *
+ * from a widget towards the Shub. This register is intended to be *
+ * used by software in case of misbehaving widgets. *
+ * *
+ * *
+ ************************************************************************/
+
+typedef union ii_iiwa_u {
+ uint64_t ii_iiwa_regval;
+ struct {
+ uint64_t i_w0_iac : 1;
+ uint64_t i_rsvd_1 : 7;
+ uint64_t i_wx_iac : 8;
+ uint64_t i_rsvd : 48;
+ } ii_iiwa_fld_s;
+} ii_iiwa_u_t;
+
+
+
+/************************************************************************
+ * *
+ * Description: This register qualifies all the operations launched *
+ * from a widget towards the SHub. It allows individual access *
+ * control for up to 8 devices per widget. A device refers to *
+ * individual DMA master hosted by a widget. *
+ * The bits in each field of this register are cleared by the Shub *
+ * upon detection of an error which requires the device to be *
+ * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric *
+ * Crosstalk). Whether or not a device has access rights to this *
+ * Shub is determined by an AND of the device enable bit in the *
+ * appropriate field of this register and the corresponding bit in *
+ * the Wx_IAC field (for the widget which this device belongs to). *
+ * The bits in this field are set by writing a 1 to them. Incoming *
+ * replies from Crosstalk are not subject to this access control *
+ * mechanism. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iidem_u {
+ uint64_t ii_iidem_regval;
+ struct {
+ uint64_t i_w8_dxs : 8;
+ uint64_t i_w9_dxs : 8;
+ uint64_t i_wa_dxs : 8;
+ uint64_t i_wb_dxs : 8;
+ uint64_t i_wc_dxs : 8;
+ uint64_t i_wd_dxs : 8;
+ uint64_t i_we_dxs : 8;
+ uint64_t i_wf_dxs : 8;
+ } ii_iidem_fld_s;
+} ii_iidem_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the various programmable fields necessary *
+ * for controlling and observing the LLP signals. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ilcsr_u {
+ uint64_t ii_ilcsr_regval;
+ struct {
+ uint64_t i_nullto : 6;
+ uint64_t i_rsvd_4 : 2;
+ uint64_t i_wrmrst : 1;
+ uint64_t i_rsvd_3 : 1;
+ uint64_t i_llp_en : 1;
+ uint64_t i_bm8 : 1;
+ uint64_t i_llp_stat : 2;
+ uint64_t i_remote_power : 1;
+ uint64_t i_rsvd_2 : 1;
+ uint64_t i_maxrtry : 10;
+ uint64_t i_d_avail_sel : 2;
+ uint64_t i_rsvd_1 : 4;
+ uint64_t i_maxbrst : 10;
+ uint64_t i_rsvd : 22;
+
+ } ii_ilcsr_fld_s;
+} ii_ilcsr_u_t;
+
+
+/************************************************************************
+ * *
+ * This is simply a status registers that monitors the LLP error *
+ * rate. *
+ * *
+ ************************************************************************/
+
+typedef union ii_illr_u {
+ uint64_t ii_illr_regval;
+ struct {
+ uint64_t i_sn_cnt : 16;
+ uint64_t i_cb_cnt : 16;
+ uint64_t i_rsvd : 32;
+ } ii_illr_fld_s;
+} ii_illr_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: All II-detected non-BTE error interrupts are *
+ * specified via this register. *
+ * NOTE: The PI interrupt register address is hardcoded in the II. If *
+ * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI *
+ * packet) to address offset 0x0180_0090 within the local register *
+ * address space of PI0 on the node specified by the NODE field. If *
+ * PI_ID==1, then the II sends the interrupt request to address *
+ * offset 0x01A0_0090 within the local register address space of PI1 *
+ * on the node specified by the NODE field. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iidsr_u {
+ uint64_t ii_iidsr_regval;
+ struct {
+ uint64_t i_level : 8;
+ uint64_t i_pi_id : 1;
+ uint64_t i_node : 11;
+ uint64_t i_rsvd_3 : 4;
+ uint64_t i_enable : 1;
+ uint64_t i_rsvd_2 : 3;
+ uint64_t i_int_sent : 2;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_pi0_forward_int : 1;
+ uint64_t i_pi1_forward_int : 1;
+ uint64_t i_rsvd : 30;
+ } ii_iidsr_fld_s;
+} ii_iidsr_u_t;
+
+
+
+/************************************************************************
+ * *
+ * There are two instances of this register. This register is used *
+ * for matching up the incoming responses from the graphics widget to *
+ * the processor that initiated the graphics operation. The *
+ * write-responses are converted to graphics credits and returned to *
+ * the processor so that the processor interface can manage the flow *
+ * control. *
+ * *
+ ************************************************************************/
+
+typedef union ii_igfx0_u {
+ uint64_t ii_igfx0_regval;
+ struct {
+ uint64_t i_w_num : 4;
+ uint64_t i_pi_id : 1;
+ uint64_t i_n_num : 12;
+ uint64_t i_p_num : 1;
+ uint64_t i_rsvd : 46;
+ } ii_igfx0_fld_s;
+} ii_igfx0_u_t;
+
+
+/************************************************************************
+ * *
+ * There are two instances of this register. This register is used *
+ * for matching up the incoming responses from the graphics widget to *
+ * the processor that initiated the graphics operation. The *
+ * write-responses are converted to graphics credits and returned to *
+ * the processor so that the processor interface can manage the flow *
+ * control. *
+ * *
+ ************************************************************************/
+
+typedef union ii_igfx1_u {
+ uint64_t ii_igfx1_regval;
+ struct {
+ uint64_t i_w_num : 4;
+ uint64_t i_pi_id : 1;
+ uint64_t i_n_num : 12;
+ uint64_t i_p_num : 1;
+ uint64_t i_rsvd : 46;
+ } ii_igfx1_fld_s;
+} ii_igfx1_u_t;
+
+
+/************************************************************************
+ * *
+ * There are two instances of this registers. These registers are *
+ * used as scratch registers for software use. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iscr0_u {
+ uint64_t ii_iscr0_regval;
+ struct {
+ uint64_t i_scratch : 64;
+ } ii_iscr0_fld_s;
+} ii_iscr0_u_t;
+
+
+
+/************************************************************************
+ * *
+ * There are two instances of this registers. These registers are *
+ * used as scratch registers for software use. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iscr1_u {
+ uint64_t ii_iscr1_regval;
+ struct {
+ uint64_t i_scratch : 64;
+ } ii_iscr1_fld_s;
+} ii_iscr1_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are seven instances of translation table entry *
+ * registers. Each register maps a Shub Big Window to a 48-bit *
+ * address on Crosstalk. *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
+ * number) are used to select one of these 7 registers. The Widget *
+ * number field is then derived from the W_NUM field for synthesizing *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
+ * are padded with zeros. Although the maximum Crosstalk space *
+ * addressable by the SHub is thus the lower 16 GBytes per widget *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
+ * space can be accessed. *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
+ * Window number) are used to select one of these 7 registers. The *
+ * Widget number field is then derived from the W_NUM field for *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum *
+ * Crosstalk space addressable by the Shub is thus the lower *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
+ * of this space can be accessed. *
+ * *
+ ************************************************************************/
+
+typedef union ii_itte1_u {
+ uint64_t ii_itte1_regval;
+ struct {
+ uint64_t i_offset : 5;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_w_num : 4;
+ uint64_t i_iosp : 1;
+ uint64_t i_rsvd : 51;
+ } ii_itte1_fld_s;
+} ii_itte1_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are seven instances of translation table entry *
+ * registers. Each register maps a Shub Big Window to a 48-bit *
+ * address on Crosstalk. *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
+ * number) are used to select one of these 7 registers. The Widget *
+ * number field is then derived from the W_NUM field for synthesizing *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
+ * are padded with zeros. Although the maximum Crosstalk space *
+ * addressable by the Shub is thus the lower 16 GBytes per widget *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
+ * space can be accessed. *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
+ * Window number) are used to select one of these 7 registers. The *
+ * Widget number field is then derived from the W_NUM field for *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum *
+ * Crosstalk space addressable by the Shub is thus the lower *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
+ * of this space can be accessed. *
+ * *
+ ************************************************************************/
+
+typedef union ii_itte2_u {
+ uint64_t ii_itte2_regval;
+ struct {
+ uint64_t i_offset : 5;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_w_num : 4;
+ uint64_t i_iosp : 1;
+ uint64_t i_rsvd : 51;
+ } ii_itte2_fld_s;
+} ii_itte2_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are seven instances of translation table entry *
+ * registers. Each register maps a Shub Big Window to a 48-bit *
+ * address on Crosstalk. *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
+ * number) are used to select one of these 7 registers. The Widget *
+ * number field is then derived from the W_NUM field for synthesizing *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
+ * are padded with zeros. Although the maximum Crosstalk space *
+ * addressable by the Shub is thus the lower 16 GBytes per widget *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
+ * space can be accessed. *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
+ * Window number) are used to select one of these 7 registers. The *
+ * Widget number field is then derived from the W_NUM field for *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum *
+ * Crosstalk space addressable by the SHub is thus the lower *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
+ * of this space can be accessed. *
+ * *
+ ************************************************************************/
+
+typedef union ii_itte3_u {
+ uint64_t ii_itte3_regval;
+ struct {
+ uint64_t i_offset : 5;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_w_num : 4;
+ uint64_t i_iosp : 1;
+ uint64_t i_rsvd : 51;
+ } ii_itte3_fld_s;
+} ii_itte3_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are seven instances of translation table entry *
+ * registers. Each register maps a SHub Big Window to a 48-bit *
+ * address on Crosstalk. *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
+ * number) are used to select one of these 7 registers. The Widget *
+ * number field is then derived from the W_NUM field for synthesizing *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
+ * are padded with zeros. Although the maximum Crosstalk space *
+ * addressable by the SHub is thus the lower 16 GBytes per widget *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
+ * space can be accessed. *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
+ * Window number) are used to select one of these 7 registers. The *
+ * Widget number field is then derived from the W_NUM field for *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum *
+ * Crosstalk space addressable by the SHub is thus the lower *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
+ * of this space can be accessed. *
+ * *
+ ************************************************************************/
+
+typedef union ii_itte4_u {
+ uint64_t ii_itte4_regval;
+ struct {
+ uint64_t i_offset : 5;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_w_num : 4;
+ uint64_t i_iosp : 1;
+ uint64_t i_rsvd : 51;
+ } ii_itte4_fld_s;
+} ii_itte4_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are seven instances of translation table entry *
+ * registers. Each register maps a SHub Big Window to a 48-bit *
+ * address on Crosstalk. *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
+ * number) are used to select one of these 7 registers. The Widget *
+ * number field is then derived from the W_NUM field for synthesizing *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
+ * are padded with zeros. Although the maximum Crosstalk space *
+ * addressable by the Shub is thus the lower 16 GBytes per widget *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
+ * space can be accessed. *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
+ * Window number) are used to select one of these 7 registers. The *
+ * Widget number field is then derived from the W_NUM field for *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum *
+ * Crosstalk space addressable by the Shub is thus the lower *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
+ * of this space can be accessed. *
+ * *
+ ************************************************************************/
+
+typedef union ii_itte5_u {
+ uint64_t ii_itte5_regval;
+ struct {
+ uint64_t i_offset : 5;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_w_num : 4;
+ uint64_t i_iosp : 1;
+ uint64_t i_rsvd : 51;
+ } ii_itte5_fld_s;
+} ii_itte5_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are seven instances of translation table entry *
+ * registers. Each register maps a Shub Big Window to a 48-bit *
+ * address on Crosstalk. *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
+ * number) are used to select one of these 7 registers. The Widget *
+ * number field is then derived from the W_NUM field for synthesizing *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
+ * are padded with zeros. Although the maximum Crosstalk space *
+ * addressable by the Shub is thus the lower 16 GBytes per widget *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
+ * space can be accessed. *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
+ * Window number) are used to select one of these 7 registers. The *
+ * Widget number field is then derived from the W_NUM field for *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum *
+ * Crosstalk space addressable by the Shub is thus the lower *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
+ * of this space can be accessed. *
+ * *
+ ************************************************************************/
+
+typedef union ii_itte6_u {
+ uint64_t ii_itte6_regval;
+ struct {
+ uint64_t i_offset : 5;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_w_num : 4;
+ uint64_t i_iosp : 1;
+ uint64_t i_rsvd : 51;
+ } ii_itte6_fld_s;
+} ii_itte6_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are seven instances of translation table entry *
+ * registers. Each register maps a Shub Big Window to a 48-bit *
+ * address on Crosstalk. *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
+ * number) are used to select one of these 7 registers. The Widget *
+ * number field is then derived from the W_NUM field for synthesizing *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
+ * are padded with zeros. Although the maximum Crosstalk space *
+ * addressable by the Shub is thus the lower 16 GBytes per widget *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
+ * space can be accessed. *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
+ * Window number) are used to select one of these 7 registers. The *
+ * Widget number field is then derived from the W_NUM field for *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum *
+ * Crosstalk space addressable by the SHub is thus the lower *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
+ * of this space can be accessed. *
+ * *
+ ************************************************************************/
+
+typedef union ii_itte7_u {
+ uint64_t ii_itte7_regval;
+ struct {
+ uint64_t i_offset : 5;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_w_num : 4;
+ uint64_t i_iosp : 1;
+ uint64_t i_rsvd : 51;
+ } ii_itte7_fld_s;
+} ii_itte7_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 9 instances of this register, one per *
+ * actual widget in this implementation of SHub and Crossbow. *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
+ * refers to Crossbow's internal space. *
+ * This register contains the state elements per widget that are *
+ * necessary to manage the PIO flow control on Crosstalk and on the *
+ * Router Network. See the PIO Flow Control chapter for a complete *
+ * description of this register *
+ * The SPUR_WR bit requires some explanation. When this register is *
+ * written, the new value of the C field is captured in an internal *
+ * register so the hardware can remember what the programmer wrote *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field *
+ * increments above this stored value, which indicates that there *
+ * have been more responses received than requests sent. The SPUR_WR *
+ * bit cannot be cleared until a value is written to the IPRBx *
+ * register; the write will correct the C field and capture its new *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
+ * . *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprb0_u {
+ uint64_t ii_iprb0_regval;
+ struct {
+ uint64_t i_c : 8;
+ uint64_t i_na : 14;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_nb : 14;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_m : 2;
+ uint64_t i_f : 1;
+ uint64_t i_of_cnt : 5;
+ uint64_t i_error : 1;
+ uint64_t i_rd_to : 1;
+ uint64_t i_spur_wr : 1;
+ uint64_t i_spur_rd : 1;
+ uint64_t i_rsvd : 11;
+ uint64_t i_mult_err : 1;
+ } ii_iprb0_fld_s;
+} ii_iprb0_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 9 instances of this register, one per *
+ * actual widget in this implementation of SHub and Crossbow. *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
+ * refers to Crossbow's internal space. *
+ * This register contains the state elements per widget that are *
+ * necessary to manage the PIO flow control on Crosstalk and on the *
+ * Router Network. See the PIO Flow Control chapter for a complete *
+ * description of this register *
+ * The SPUR_WR bit requires some explanation. When this register is *
+ * written, the new value of the C field is captured in an internal *
+ * register so the hardware can remember what the programmer wrote *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field *
+ * increments above this stored value, which indicates that there *
+ * have been more responses received than requests sent. The SPUR_WR *
+ * bit cannot be cleared until a value is written to the IPRBx *
+ * register; the write will correct the C field and capture its new *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
+ * . *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprb8_u {
+ uint64_t ii_iprb8_regval;
+ struct {
+ uint64_t i_c : 8;
+ uint64_t i_na : 14;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_nb : 14;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_m : 2;
+ uint64_t i_f : 1;
+ uint64_t i_of_cnt : 5;
+ uint64_t i_error : 1;
+ uint64_t i_rd_to : 1;
+ uint64_t i_spur_wr : 1;
+ uint64_t i_spur_rd : 1;
+ uint64_t i_rsvd : 11;
+ uint64_t i_mult_err : 1;
+ } ii_iprb8_fld_s;
+} ii_iprb8_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 9 instances of this register, one per *
+ * actual widget in this implementation of SHub and Crossbow. *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
+ * refers to Crossbow's internal space. *
+ * This register contains the state elements per widget that are *
+ * necessary to manage the PIO flow control on Crosstalk and on the *
+ * Router Network. See the PIO Flow Control chapter for a complete *
+ * description of this register *
+ * The SPUR_WR bit requires some explanation. When this register is *
+ * written, the new value of the C field is captured in an internal *
+ * register so the hardware can remember what the programmer wrote *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field *
+ * increments above this stored value, which indicates that there *
+ * have been more responses received than requests sent. The SPUR_WR *
+ * bit cannot be cleared until a value is written to the IPRBx *
+ * register; the write will correct the C field and capture its new *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
+ * . *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprb9_u {
+ uint64_t ii_iprb9_regval;
+ struct {
+ uint64_t i_c : 8;
+ uint64_t i_na : 14;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_nb : 14;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_m : 2;
+ uint64_t i_f : 1;
+ uint64_t i_of_cnt : 5;
+ uint64_t i_error : 1;
+ uint64_t i_rd_to : 1;
+ uint64_t i_spur_wr : 1;
+ uint64_t i_spur_rd : 1;
+ uint64_t i_rsvd : 11;
+ uint64_t i_mult_err : 1;
+ } ii_iprb9_fld_s;
+} ii_iprb9_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 9 instances of this register, one per *
+ * actual widget in this implementation of SHub and Crossbow. *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
+ * refers to Crossbow's internal space. *
+ * This register contains the state elements per widget that are *
+ * necessary to manage the PIO flow control on Crosstalk and on the *
+ * Router Network. See the PIO Flow Control chapter for a complete *
+ * description of this register *
+ * The SPUR_WR bit requires some explanation. When this register is *
+ * written, the new value of the C field is captured in an internal *
+ * register so the hardware can remember what the programmer wrote *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field *
+ * increments above this stored value, which indicates that there *
+ * have been more responses received than requests sent. The SPUR_WR *
+ * bit cannot be cleared until a value is written to the IPRBx *
+ * register; the write will correct the C field and capture its new *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
+ * *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprba_u {
+ uint64_t ii_iprba_regval;
+ struct {
+ uint64_t i_c : 8;
+ uint64_t i_na : 14;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_nb : 14;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_m : 2;
+ uint64_t i_f : 1;
+ uint64_t i_of_cnt : 5;
+ uint64_t i_error : 1;
+ uint64_t i_rd_to : 1;
+ uint64_t i_spur_wr : 1;
+ uint64_t i_spur_rd : 1;
+ uint64_t i_rsvd : 11;
+ uint64_t i_mult_err : 1;
+ } ii_iprba_fld_s;
+} ii_iprba_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 9 instances of this register, one per *
+ * actual widget in this implementation of SHub and Crossbow. *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
+ * refers to Crossbow's internal space. *
+ * This register contains the state elements per widget that are *
+ * necessary to manage the PIO flow control on Crosstalk and on the *
+ * Router Network. See the PIO Flow Control chapter for a complete *
+ * description of this register *
+ * The SPUR_WR bit requires some explanation. When this register is *
+ * written, the new value of the C field is captured in an internal *
+ * register so the hardware can remember what the programmer wrote *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field *
+ * increments above this stored value, which indicates that there *
+ * have been more responses received than requests sent. The SPUR_WR *
+ * bit cannot be cleared until a value is written to the IPRBx *
+ * register; the write will correct the C field and capture its new *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
+ * . *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprbb_u {
+ uint64_t ii_iprbb_regval;
+ struct {
+ uint64_t i_c : 8;
+ uint64_t i_na : 14;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_nb : 14;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_m : 2;
+ uint64_t i_f : 1;
+ uint64_t i_of_cnt : 5;
+ uint64_t i_error : 1;
+ uint64_t i_rd_to : 1;
+ uint64_t i_spur_wr : 1;
+ uint64_t i_spur_rd : 1;
+ uint64_t i_rsvd : 11;
+ uint64_t i_mult_err : 1;
+ } ii_iprbb_fld_s;
+} ii_iprbb_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 9 instances of this register, one per *
+ * actual widget in this implementation of SHub and Crossbow. *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
+ * refers to Crossbow's internal space. *
+ * This register contains the state elements per widget that are *
+ * necessary to manage the PIO flow control on Crosstalk and on the *
+ * Router Network. See the PIO Flow Control chapter for a complete *
+ * description of this register *
+ * The SPUR_WR bit requires some explanation. When this register is *
+ * written, the new value of the C field is captured in an internal *
+ * register so the hardware can remember what the programmer wrote *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field *
+ * increments above this stored value, which indicates that there *
+ * have been more responses received than requests sent. The SPUR_WR *
+ * bit cannot be cleared until a value is written to the IPRBx *
+ * register; the write will correct the C field and capture its new *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
+ * . *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprbc_u {
+ uint64_t ii_iprbc_regval;
+ struct {
+ uint64_t i_c : 8;
+ uint64_t i_na : 14;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_nb : 14;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_m : 2;
+ uint64_t i_f : 1;
+ uint64_t i_of_cnt : 5;
+ uint64_t i_error : 1;
+ uint64_t i_rd_to : 1;
+ uint64_t i_spur_wr : 1;
+ uint64_t i_spur_rd : 1;
+ uint64_t i_rsvd : 11;
+ uint64_t i_mult_err : 1;
+ } ii_iprbc_fld_s;
+} ii_iprbc_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 9 instances of this register, one per *
+ * actual widget in this implementation of SHub and Crossbow. *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
+ * refers to Crossbow's internal space. *
+ * This register contains the state elements per widget that are *
+ * necessary to manage the PIO flow control on Crosstalk and on the *
+ * Router Network. See the PIO Flow Control chapter for a complete *
+ * description of this register *
+ * The SPUR_WR bit requires some explanation. When this register is *
+ * written, the new value of the C field is captured in an internal *
+ * register so the hardware can remember what the programmer wrote *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field *
+ * increments above this stored value, which indicates that there *
+ * have been more responses received than requests sent. The SPUR_WR *
+ * bit cannot be cleared until a value is written to the IPRBx *
+ * register; the write will correct the C field and capture its new *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
+ * . *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprbd_u {
+ uint64_t ii_iprbd_regval;
+ struct {
+ uint64_t i_c : 8;
+ uint64_t i_na : 14;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_nb : 14;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_m : 2;
+ uint64_t i_f : 1;
+ uint64_t i_of_cnt : 5;
+ uint64_t i_error : 1;
+ uint64_t i_rd_to : 1;
+ uint64_t i_spur_wr : 1;
+ uint64_t i_spur_rd : 1;
+ uint64_t i_rsvd : 11;
+ uint64_t i_mult_err : 1;
+ } ii_iprbd_fld_s;
+} ii_iprbd_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 9 instances of this register, one per *
+ * actual widget in this implementation of SHub and Crossbow. *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
+ * refers to Crossbow's internal space. *
+ * This register contains the state elements per widget that are *
+ * necessary to manage the PIO flow control on Crosstalk and on the *
+ * Router Network. See the PIO Flow Control chapter for a complete *
+ * description of this register *
+ * The SPUR_WR bit requires some explanation. When this register is *
+ * written, the new value of the C field is captured in an internal *
+ * register so the hardware can remember what the programmer wrote *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field *
+ * increments above this stored value, which indicates that there *
+ * have been more responses received than requests sent. The SPUR_WR *
+ * bit cannot be cleared until a value is written to the IPRBx *
+ * register; the write will correct the C field and capture its new *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
+ * . *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprbe_u {
+ uint64_t ii_iprbe_regval;
+ struct {
+ uint64_t i_c : 8;
+ uint64_t i_na : 14;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_nb : 14;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_m : 2;
+ uint64_t i_f : 1;
+ uint64_t i_of_cnt : 5;
+ uint64_t i_error : 1;
+ uint64_t i_rd_to : 1;
+ uint64_t i_spur_wr : 1;
+ uint64_t i_spur_rd : 1;
+ uint64_t i_rsvd : 11;
+ uint64_t i_mult_err : 1;
+ } ii_iprbe_fld_s;
+} ii_iprbe_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 9 instances of this register, one per *
+ * actual widget in this implementation of Shub and Crossbow. *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
+ * refers to Crossbow's internal space. *
+ * This register contains the state elements per widget that are *
+ * necessary to manage the PIO flow control on Crosstalk and on the *
+ * Router Network. See the PIO Flow Control chapter for a complete *
+ * description of this register *
+ * The SPUR_WR bit requires some explanation. When this register is *
+ * written, the new value of the C field is captured in an internal *
+ * register so the hardware can remember what the programmer wrote *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field *
+ * increments above this stored value, which indicates that there *
+ * have been more responses received than requests sent. The SPUR_WR *
+ * bit cannot be cleared until a value is written to the IPRBx *
+ * register; the write will correct the C field and capture its new *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
+ * . *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprbf_u {
+ uint64_t ii_iprbf_regval;
+ struct {
+ uint64_t i_c : 8;
+ uint64_t i_na : 14;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_nb : 14;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_m : 2;
+ uint64_t i_f : 1;
+ uint64_t i_of_cnt : 5;
+ uint64_t i_error : 1;
+ uint64_t i_rd_to : 1;
+ uint64_t i_spur_wr : 1;
+ uint64_t i_spur_rd : 1;
+ uint64_t i_rsvd : 11;
+ uint64_t i_mult_err : 1;
+ } ii_iprbe_fld_s;
+} ii_iprbf_u_t;
+
+
+/************************************************************************
+ * *
+ * This register specifies the timeout value to use for monitoring *
+ * Crosstalk credits which are used outbound to Crosstalk. An *
+ * internal counter called the Crosstalk Credit Timeout Counter *
+ * increments every 128 II clocks. The counter starts counting *
+ * anytime the credit count drops below a threshold, and resets to *
+ * zero (stops counting) anytime the credit count is at or above the *
+ * threshold. The threshold is 1 credit in direct connect mode and 2 *
+ * in Crossbow connect mode. When the internal Crosstalk Credit *
+ * Timeout Counter reaches the value programmed in this register, a *
+ * Crosstalk Credit Timeout has occurred. The internal counter is not *
+ * readable from software, and stops counting at its maximum value, *
+ * so it cannot cause more than one interrupt. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ixcc_u {
+ uint64_t ii_ixcc_regval;
+ struct {
+ uint64_t i_time_out : 26;
+ uint64_t i_rsvd : 38;
+ } ii_ixcc_fld_s;
+} ii_ixcc_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: This register qualifies all the PIO and DMA *
+ * operations launched from widget 0 towards the SHub. In *
+ * addition, it also qualifies accesses by the BTE streams. *
+ * The bits in each field of this register are cleared by the SHub *
+ * upon detection of an error which requires widget 0 or the BTE *
+ * streams to be terminated. Whether or not widget x has access *
+ * rights to this SHub is determined by an AND of the device *
+ * enable bit in the appropriate field of this register and bit 0 in *
+ * the Wx_IAC field. The bits in this field are set by writing a 1 to *
+ * them. Incoming replies from Crosstalk are not subject to this *
+ * access control mechanism. *
+ * *
+ ************************************************************************/
+
+typedef union ii_imem_u {
+ uint64_t ii_imem_regval;
+ struct {
+ uint64_t i_w0_esd : 1;
+ uint64_t i_rsvd_3 : 3;
+ uint64_t i_b0_esd : 1;
+ uint64_t i_rsvd_2 : 3;
+ uint64_t i_b1_esd : 1;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_clr_precise : 1;
+ uint64_t i_rsvd : 51;
+ } ii_imem_fld_s;
+} ii_imem_u_t;
+
+
+
+/************************************************************************
+ * *
+ * Description: This register specifies the timeout value to use for *
+ * monitoring Crosstalk tail flits coming into the Shub in the *
+ * TAIL_TO field. An internal counter associated with this register *
+ * is incremented every 128 II internal clocks (7 bits). The counter *
+ * starts counting anytime a header micropacket is received and stops *
+ * counting (and resets to zero) any time a micropacket with a Tail *
+ * bit is received. Once the counter reaches the threshold value *
+ * programmed in this register, it generates an interrupt to the *
+ * processor that is programmed into the IIDSR. The counter saturates *
+ * (does not roll over) at its maximum value, so it cannot cause *
+ * another interrupt until after it is cleared. *
+ * The register also contains the Read Response Timeout values. The *
+ * Prescalar is 23 bits, and counts II clocks. An internal counter *
+ * increments on every II clock and when it reaches the value in the *
+ * Prescalar field, all IPRTE registers with their valid bits set *
+ * have their Read Response timers bumped. Whenever any of them match *
+ * the value in the RRSP_TO field, a Read Response Timeout has *
+ * occurred, and error handling occurs as described in the Error *
+ * Handling section of this document. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ixtt_u {
+ uint64_t ii_ixtt_regval;
+ struct {
+ uint64_t i_tail_to : 26;
+ uint64_t i_rsvd_1 : 6;
+ uint64_t i_rrsp_ps : 23;
+ uint64_t i_rrsp_to : 5;
+ uint64_t i_rsvd : 4;
+ } ii_ixtt_fld_s;
+} ii_ixtt_u_t;
+
+
+/************************************************************************
+ * *
+ * Writing a 1 to the fields of this register clears the appropriate *
+ * error bits in other areas of SHub. Note that when the *
+ * E_PRB_x bits are used to clear error bits in PRB registers, *
+ * SPUR_RD and SPUR_WR may persist, because they require additional *
+ * action to clear them. See the IPRBx and IXSS Register *
+ * specifications. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ieclr_u {
+ uint64_t ii_ieclr_regval;
+ struct {
+ uint64_t i_e_prb_0 : 1;
+ uint64_t i_rsvd : 7;
+ uint64_t i_e_prb_8 : 1;
+ uint64_t i_e_prb_9 : 1;
+ uint64_t i_e_prb_a : 1;
+ uint64_t i_e_prb_b : 1;
+ uint64_t i_e_prb_c : 1;
+ uint64_t i_e_prb_d : 1;
+ uint64_t i_e_prb_e : 1;
+ uint64_t i_e_prb_f : 1;
+ uint64_t i_e_crazy : 1;
+ uint64_t i_e_bte_0 : 1;
+ uint64_t i_e_bte_1 : 1;
+ uint64_t i_reserved_1 : 10;
+ uint64_t i_spur_rd_hdr : 1;
+ uint64_t i_cam_intr_to : 1;
+ uint64_t i_cam_overflow : 1;
+ uint64_t i_cam_read_miss : 1;
+ uint64_t i_ioq_rep_underflow : 1;
+ uint64_t i_ioq_req_underflow : 1;
+ uint64_t i_ioq_rep_overflow : 1;
+ uint64_t i_ioq_req_overflow : 1;
+ uint64_t i_iiq_rep_overflow : 1;
+ uint64_t i_iiq_req_overflow : 1;
+ uint64_t i_ii_xn_rep_cred_overflow : 1;
+ uint64_t i_ii_xn_req_cred_overflow : 1;
+ uint64_t i_ii_xn_invalid_cmd : 1;
+ uint64_t i_xn_ii_invalid_cmd : 1;
+ uint64_t i_reserved_2 : 21;
+ } ii_ieclr_fld_s;
+} ii_ieclr_u_t;
+
+
+/************************************************************************
+ * *
+ * This register controls both BTEs. SOFT_RESET is intended for *
+ * recovery after an error. COUNT controls the total number of CRBs *
+ * that both BTEs (combined) can use, which affects total BTE *
+ * bandwidth. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibcr_u {
+ uint64_t ii_ibcr_regval;
+ struct {
+ uint64_t i_count : 4;
+ uint64_t i_rsvd_1 : 4;
+ uint64_t i_soft_reset : 1;
+ uint64_t i_rsvd : 55;
+ } ii_ibcr_fld_s;
+} ii_ibcr_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the header of a spurious read response *
+ * received from Crosstalk. A spurious read response is defined as a *
+ * read response received by II from a widget for which (1) the SIDN *
+ * has a value between 1 and 7, inclusive (II never sends requests to *
+ * these widgets (2) there is no valid IPRTE register which *
+ * corresponds to the TNUM, or (3) the widget indicated in SIDN is *
+ * not the same as the widget recorded in the IPRTE register *
+ * referenced by the TNUM. If this condition is true, and if the *
+ * IXSS[VALID] bit is clear, then the header of the spurious read *
+ * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The *
+ * errant header is thereby captured, and no further spurious read *
+ * respones are captured until IXSS[VALID] is cleared by setting the *
+ * appropriate bit in IECLR.Everytime a spurious read response is *
+ * detected, the SPUR_RD bit of the PRB corresponding to the incoming *
+ * message's SIDN field is set. This always happens, regarless of *
+ * whether a header is captured. The programmer should check *
+ * IXSM[SIDN] to determine which widget sent the spurious response, *
+ * because there may be more than one SPUR_RD bit set in the PRB *
+ * registers. The widget indicated by IXSM[SIDN] was the first *
+ * spurious read response to be received since the last time *
+ * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB *
+ * will be set. Any SPUR_RD bits in any other PRB registers indicate *
+ * spurious messages from other widets which were detected after the *
+ * header was captured.. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ixsm_u {
+ uint64_t ii_ixsm_regval;
+ struct {
+ uint64_t i_byte_en : 32;
+ uint64_t i_reserved : 1;
+ uint64_t i_tag : 3;
+ uint64_t i_alt_pactyp : 4;
+ uint64_t i_bo : 1;
+ uint64_t i_error : 1;
+ uint64_t i_vbpm : 1;
+ uint64_t i_gbr : 1;
+ uint64_t i_ds : 2;
+ uint64_t i_ct : 1;
+ uint64_t i_tnum : 5;
+ uint64_t i_pactyp : 4;
+ uint64_t i_sidn : 4;
+ uint64_t i_didn : 4;
+ } ii_ixsm_fld_s;
+} ii_ixsm_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the sideband bits of a spurious read *
+ * response received from Crosstalk. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ixss_u {
+ uint64_t ii_ixss_regval;
+ struct {
+ uint64_t i_sideband : 8;
+ uint64_t i_rsvd : 55;
+ uint64_t i_valid : 1;
+ } ii_ixss_fld_s;
+} ii_ixss_u_t;
+
+
+/************************************************************************
+ * *
+ * This register enables software to access the II LLP's test port. *
+ * Refer to the LLP 2.5 documentation for an explanation of the test *
+ * port. Software can write to this register to program the values *
+ * for the control fields (TestErrCapture, TestClear, TestFlit, *
+ * TestMask and TestSeed). Similarly, software can read from this *
+ * register to obtain the values of the test port's status outputs *
+ * (TestCBerr, TestValid and TestData). *
+ * *
+ ************************************************************************/
+
+typedef union ii_ilct_u {
+ uint64_t ii_ilct_regval;
+ struct {
+ uint64_t i_test_seed : 20;
+ uint64_t i_test_mask : 8;
+ uint64_t i_test_data : 20;
+ uint64_t i_test_valid : 1;
+ uint64_t i_test_cberr : 1;
+ uint64_t i_test_flit : 3;
+ uint64_t i_test_clear : 1;
+ uint64_t i_test_err_capture : 1;
+ uint64_t i_rsvd : 9;
+ } ii_ilct_fld_s;
+} ii_ilct_u_t;
+
+
+/************************************************************************
+ * *
+ * If the II detects an illegal incoming Duplonet packet (request or *
+ * reply) when VALID==0 in the IIEPH1 register, then it saves the *
+ * contents of the packet's header flit in the IIEPH1 and IIEPH2 *
+ * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit, *
+ * and assigns a value to the ERR_TYPE field which indicates the *
+ * specific nature of the error. The II recognizes four different *
+ * types of errors: short request packets (ERR_TYPE==2), short reply *
+ * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long *
+ * reply packets (ERR_TYPE==5). The encodings for these types of *
+ * errors were chosen to be consistent with the same types of errors *
+ * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in *
+ * the LB unit). If the II detects an illegal incoming Duplonet *
+ * packet when VALID==1 in the IIEPH1 register, then it merely sets *
+ * the OVERRUN bit to indicate that a subsequent error has happened, *
+ * and does nothing further. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iieph1_u {
+ uint64_t ii_iieph1_regval;
+ struct {
+ uint64_t i_command : 7;
+ uint64_t i_rsvd_5 : 1;
+ uint64_t i_suppl : 14;
+ uint64_t i_rsvd_4 : 1;
+ uint64_t i_source : 14;
+ uint64_t i_rsvd_3 : 1;
+ uint64_t i_err_type : 4;
+ uint64_t i_rsvd_2 : 4;
+ uint64_t i_overrun : 1;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_valid : 1;
+ uint64_t i_rsvd : 13;
+ } ii_iieph1_fld_s;
+} ii_iieph1_u_t;
+
+
+/************************************************************************
+ * *
+ * This register holds the Address field from the header flit of an *
+ * incoming erroneous Duplonet packet, along with the tail bit which *
+ * accompanied this header flit. This register is essentially an *
+ * extension of IIEPH1. Two registers were necessary because the 64 *
+ * bits available in only a single register were insufficient to *
+ * capture the entire header flit of an erroneous packet. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iieph2_u {
+ uint64_t ii_iieph2_regval;
+ struct {
+ uint64_t i_rsvd_0 : 3;
+ uint64_t i_address : 47;
+ uint64_t i_rsvd_1 : 10;
+ uint64_t i_tail : 1;
+ uint64_t i_rsvd : 3;
+ } ii_iieph2_fld_s;
+} ii_iieph2_u_t;
+
+
+/******************************/
+
+
+
+/************************************************************************
+ * *
+ * This register's value is a bit vector that guards access from SXBs *
+ * to local registers within the II as well as to external Crosstalk *
+ * widgets *
+ * *
+ ************************************************************************/
+
+typedef union ii_islapr_u {
+ uint64_t ii_islapr_regval;
+ struct {
+ uint64_t i_region : 64;
+ } ii_islapr_fld_s;
+} ii_islapr_u_t;
+
+
+/************************************************************************
+ * *
+ * A write to this register of the 56-bit value "Pup+Bun" will cause *
+ * the bit in the ISLAPR register corresponding to the region of the *
+ * requestor to be set (access allowed). (
+ * *
+ ************************************************************************/
+
+typedef union ii_islapo_u {
+ uint64_t ii_islapo_regval;
+ struct {
+ uint64_t i_io_sbx_ovrride : 56;
+ uint64_t i_rsvd : 8;
+ } ii_islapo_fld_s;
+} ii_islapo_u_t;
+
+/************************************************************************
+ * *
+ * Determines how long the wrapper will wait aftr an interrupt is *
+ * initially issued from the II before it times out the outstanding *
+ * interrupt and drops it from the interrupt queue. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iwi_u {
+ uint64_t ii_iwi_regval;
+ struct {
+ uint64_t i_prescale : 24;
+ uint64_t i_rsvd : 8;
+ uint64_t i_timeout : 8;
+ uint64_t i_rsvd1 : 8;
+ uint64_t i_intrpt_retry_period : 8;
+ uint64_t i_rsvd2 : 8;
+ } ii_iwi_fld_s;
+} ii_iwi_u_t;
+
+/************************************************************************
+ * *
+ * Log errors which have occurred in the II wrapper. The errors are *
+ * cleared by writing to the IECLR register. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iwel_u {
+ uint64_t ii_iwel_regval;
+ struct {
+ uint64_t i_intr_timed_out : 1;
+ uint64_t i_rsvd : 7;
+ uint64_t i_cam_overflow : 1;
+ uint64_t i_cam_read_miss : 1;
+ uint64_t i_rsvd1 : 2;
+ uint64_t i_ioq_rep_underflow : 1;
+ uint64_t i_ioq_req_underflow : 1;
+ uint64_t i_ioq_rep_overflow : 1;
+ uint64_t i_ioq_req_overflow : 1;
+ uint64_t i_iiq_rep_overflow : 1;
+ uint64_t i_iiq_req_overflow : 1;
+ uint64_t i_rsvd2 : 6;
+ uint64_t i_ii_xn_rep_cred_over_under: 1;
+ uint64_t i_ii_xn_req_cred_over_under: 1;
+ uint64_t i_rsvd3 : 6;
+ uint64_t i_ii_xn_invalid_cmd : 1;
+ uint64_t i_xn_ii_invalid_cmd : 1;
+ uint64_t i_rsvd4 : 30;
+ } ii_iwel_fld_s;
+} ii_iwel_u_t;
+
+/************************************************************************
+ * *
+ * Controls the II wrapper. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iwc_u {
+ uint64_t ii_iwc_regval;
+ struct {
+ uint64_t i_dma_byte_swap : 1;
+ uint64_t i_rsvd : 3;
+ uint64_t i_cam_read_lines_reset : 1;
+ uint64_t i_rsvd1 : 3;
+ uint64_t i_ii_xn_cred_over_under_log: 1;
+ uint64_t i_rsvd2 : 19;
+ uint64_t i_xn_rep_iq_depth : 5;
+ uint64_t i_rsvd3 : 3;
+ uint64_t i_xn_req_iq_depth : 5;
+ uint64_t i_rsvd4 : 3;
+ uint64_t i_iiq_depth : 6;
+ uint64_t i_rsvd5 : 12;
+ uint64_t i_force_rep_cred : 1;
+ uint64_t i_force_req_cred : 1;
+ } ii_iwc_fld_s;
+} ii_iwc_u_t;
+
+/************************************************************************
+ * *
+ * Status in the II wrapper. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iws_u {
+ uint64_t ii_iws_regval;
+ struct {
+ uint64_t i_xn_rep_iq_credits : 5;
+ uint64_t i_rsvd : 3;
+ uint64_t i_xn_req_iq_credits : 5;
+ uint64_t i_rsvd1 : 51;
+ } ii_iws_fld_s;
+} ii_iws_u_t;
+
+/************************************************************************
+ * *
+ * Masks errors in the IWEL register. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iweim_u {
+ uint64_t ii_iweim_regval;
+ struct {
+ uint64_t i_intr_timed_out : 1;
+ uint64_t i_rsvd : 7;
+ uint64_t i_cam_overflow : 1;
+ uint64_t i_cam_read_miss : 1;
+ uint64_t i_rsvd1 : 2;
+ uint64_t i_ioq_rep_underflow : 1;
+ uint64_t i_ioq_req_underflow : 1;
+ uint64_t i_ioq_rep_overflow : 1;
+ uint64_t i_ioq_req_overflow : 1;
+ uint64_t i_iiq_rep_overflow : 1;
+ uint64_t i_iiq_req_overflow : 1;
+ uint64_t i_rsvd2 : 6;
+ uint64_t i_ii_xn_rep_cred_overflow : 1;
+ uint64_t i_ii_xn_req_cred_overflow : 1;
+ uint64_t i_rsvd3 : 6;
+ uint64_t i_ii_xn_invalid_cmd : 1;
+ uint64_t i_xn_ii_invalid_cmd : 1;
+ uint64_t i_rsvd4 : 30;
+ } ii_iweim_fld_s;
+} ii_iweim_u_t;
+
+
+/************************************************************************
+ * *
+ * A write to this register causes a particular field in the *
+ * corresponding widget's PRB entry to be adjusted up or down by 1. *
+ * This counter should be used when recovering from error and reset *
+ * conditions. Note that software would be capable of causing *
+ * inadvertent overflow or underflow of these counters. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ipca_u {
+ uint64_t ii_ipca_regval;
+ struct {
+ uint64_t i_wid : 4;
+ uint64_t i_adjust : 1;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_field : 2;
+ uint64_t i_rsvd : 54;
+ } ii_ipca_fld_s;
+} ii_ipca_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+
+typedef union ii_iprte0a_u {
+ uint64_t ii_iprte0a_regval;
+ struct {
+ uint64_t i_rsvd_1 : 54;
+ uint64_t i_widget : 4;
+ uint64_t i_to_cnt : 5;
+ uint64_t i_vld : 1;
+ } ii_iprte0a_fld_s;
+} ii_iprte0a_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte1a_u {
+ uint64_t ii_iprte1a_regval;
+ struct {
+ uint64_t i_rsvd_1 : 54;
+ uint64_t i_widget : 4;
+ uint64_t i_to_cnt : 5;
+ uint64_t i_vld : 1;
+ } ii_iprte1a_fld_s;
+} ii_iprte1a_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte2a_u {
+ uint64_t ii_iprte2a_regval;
+ struct {
+ uint64_t i_rsvd_1 : 54;
+ uint64_t i_widget : 4;
+ uint64_t i_to_cnt : 5;
+ uint64_t i_vld : 1;
+ } ii_iprte2a_fld_s;
+} ii_iprte2a_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte3a_u {
+ uint64_t ii_iprte3a_regval;
+ struct {
+ uint64_t i_rsvd_1 : 54;
+ uint64_t i_widget : 4;
+ uint64_t i_to_cnt : 5;
+ uint64_t i_vld : 1;
+ } ii_iprte3a_fld_s;
+} ii_iprte3a_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte4a_u {
+ uint64_t ii_iprte4a_regval;
+ struct {
+ uint64_t i_rsvd_1 : 54;
+ uint64_t i_widget : 4;
+ uint64_t i_to_cnt : 5;
+ uint64_t i_vld : 1;
+ } ii_iprte4a_fld_s;
+} ii_iprte4a_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte5a_u {
+ uint64_t ii_iprte5a_regval;
+ struct {
+ uint64_t i_rsvd_1 : 54;
+ uint64_t i_widget : 4;
+ uint64_t i_to_cnt : 5;
+ uint64_t i_vld : 1;
+ } ii_iprte5a_fld_s;
+} ii_iprte5a_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte6a_u {
+ uint64_t ii_iprte6a_regval;
+ struct {
+ uint64_t i_rsvd_1 : 54;
+ uint64_t i_widget : 4;
+ uint64_t i_to_cnt : 5;
+ uint64_t i_vld : 1;
+ } ii_iprte6a_fld_s;
+} ii_iprte6a_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte7a_u {
+ uint64_t ii_iprte7a_regval;
+ struct {
+ uint64_t i_rsvd_1 : 54;
+ uint64_t i_widget : 4;
+ uint64_t i_to_cnt : 5;
+ uint64_t i_vld : 1;
+ } ii_iprtea7_fld_s;
+} ii_iprte7a_u_t;
+
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+
+typedef union ii_iprte0b_u {
+ uint64_t ii_iprte0b_regval;
+ struct {
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_address : 47;
+ uint64_t i_init : 3;
+ uint64_t i_source : 11;
+ } ii_iprte0b_fld_s;
+} ii_iprte0b_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte1b_u {
+ uint64_t ii_iprte1b_regval;
+ struct {
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_address : 47;
+ uint64_t i_init : 3;
+ uint64_t i_source : 11;
+ } ii_iprte1b_fld_s;
+} ii_iprte1b_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte2b_u {
+ uint64_t ii_iprte2b_regval;
+ struct {
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_address : 47;
+ uint64_t i_init : 3;
+ uint64_t i_source : 11;
+ } ii_iprte2b_fld_s;
+} ii_iprte2b_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte3b_u {
+ uint64_t ii_iprte3b_regval;
+ struct {
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_address : 47;
+ uint64_t i_init : 3;
+ uint64_t i_source : 11;
+ } ii_iprte3b_fld_s;
+} ii_iprte3b_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte4b_u {
+ uint64_t ii_iprte4b_regval;
+ struct {
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_address : 47;
+ uint64_t i_init : 3;
+ uint64_t i_source : 11;
+ } ii_iprte4b_fld_s;
+} ii_iprte4b_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte5b_u {
+ uint64_t ii_iprte5b_regval;
+ struct {
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_address : 47;
+ uint64_t i_init : 3;
+ uint64_t i_source : 11;
+ } ii_iprte5b_fld_s;
+} ii_iprte5b_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte6b_u {
+ uint64_t ii_iprte6b_regval;
+ struct {
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_address : 47;
+ uint64_t i_init : 3;
+ uint64_t i_source : 11;
+
+ } ii_iprte6b_fld_s;
+} ii_iprte6b_u_t;
+
+
+/************************************************************************
+ * *
+ * There are 8 instances of this register. This register contains *
+ * the information that the II has to remember once it has launched a *
+ * PIO Read operation. The contents are used to form the correct *
+ * Router Network packet and direct the Crosstalk reply to the *
+ * appropriate processor. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iprte7b_u {
+ uint64_t ii_iprte7b_regval;
+ struct {
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_address : 47;
+ uint64_t i_init : 3;
+ uint64_t i_source : 11;
+ } ii_iprte7b_fld_s;
+} ii_iprte7b_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: SHub II contains a feature which did not exist in *
+ * the Hub which automatically cleans up after a Read Response *
+ * timeout, including deallocation of the IPRTE and recovery of IBuf *
+ * space. The inclusion of this register in SHub is for backward *
+ * compatibility *
+ * A write to this register causes an entry from the table of *
+ * outstanding PIO Read Requests to be freed and returned to the *
+ * stack of free entries. This register is used in handling the *
+ * timeout errors that result in a PIO Reply never returning from *
+ * Crosstalk. *
+ * Note that this register does not affect the contents of the IPRTE *
+ * registers. The Valid bits in those registers have to be *
+ * specifically turned off by software. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ipdr_u {
+ uint64_t ii_ipdr_regval;
+ struct {
+ uint64_t i_te : 3;
+ uint64_t i_rsvd_1 : 1;
+ uint64_t i_pnd : 1;
+ uint64_t i_init_rpcnt : 1;
+ uint64_t i_rsvd : 58;
+ } ii_ipdr_fld_s;
+} ii_ipdr_u_t;
+
+
+/************************************************************************
+ * *
+ * A write to this register causes a CRB entry to be returned to the *
+ * queue of free CRBs. The entry should have previously been cleared *
+ * (mark bit) via backdoor access to the pertinent CRB entry. This *
+ * register is used in the last step of handling the errors that are *
+ * captured and marked in CRB entries. Briefly: 1) first error for *
+ * DMA write from a particular device, and first error for a *
+ * particular BTE stream, lead to a marked CRB entry, and processor *
+ * interrupt, 2) software reads the error information captured in the *
+ * CRB entry, and presumably takes some corrective action, 3) *
+ * software clears the mark bit, and finally 4) software writes to *
+ * the ICDR register to return the CRB entry to the list of free CRB *
+ * entries. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icdr_u {
+ uint64_t ii_icdr_regval;
+ struct {
+ uint64_t i_crb_num : 4;
+ uint64_t i_pnd : 1;
+ uint64_t i_rsvd : 59;
+ } ii_icdr_fld_s;
+} ii_icdr_u_t;
+
+
+/************************************************************************
+ * *
+ * This register provides debug access to two FIFOs inside of II. *
+ * Both IOQ_MAX* fields of this register contain the instantaneous *
+ * depth (in units of the number of available entries) of the *
+ * associated IOQ FIFO. A read of this register will return the *
+ * number of free entries on each FIFO at the time of the read. So *
+ * when a FIFO is idle, the associated field contains the maximum *
+ * depth of the FIFO. This register is writable for debug reasons *
+ * and is intended to be written with the maximum desired FIFO depth *
+ * while the FIFO is idle. Software must assure that II is idle when *
+ * this register is written. If there are any active entries in any *
+ * of these FIFOs when this register is written, the results are *
+ * undefined. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ifdr_u {
+ uint64_t ii_ifdr_regval;
+ struct {
+ uint64_t i_ioq_max_rq : 7;
+ uint64_t i_set_ioq_rq : 1;
+ uint64_t i_ioq_max_rp : 7;
+ uint64_t i_set_ioq_rp : 1;
+ uint64_t i_rsvd : 48;
+ } ii_ifdr_fld_s;
+} ii_ifdr_u_t;
+
+
+/************************************************************************
+ * *
+ * This register allows the II to become sluggish in removing *
+ * messages from its inbound queue (IIQ). This will cause messages to *
+ * back up in either virtual channel. Disabling the "molasses" mode *
+ * subsequently allows the II to be tested under stress. In the *
+ * sluggish ("Molasses") mode, the localized effects of congestion *
+ * can be observed. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iiap_u {
+ uint64_t ii_iiap_regval;
+ struct {
+ uint64_t i_rq_mls : 6;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_rp_mls : 6;
+ uint64_t i_rsvd : 50;
+ } ii_iiap_fld_s;
+} ii_iiap_u_t;
+
+
+/************************************************************************
+ * *
+ * This register allows several parameters of CRB operation to be *
+ * set. Note that writing to this register can have catastrophic side *
+ * effects, if the CRB is not quiescent, i.e. if the CRB is *
+ * processing protocol messages when the write occurs. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icmr_u {
+ uint64_t ii_icmr_regval;
+ struct {
+ uint64_t i_sp_msg : 1;
+ uint64_t i_rd_hdr : 1;
+ uint64_t i_rsvd_4 : 2;
+ uint64_t i_c_cnt : 4;
+ uint64_t i_rsvd_3 : 4;
+ uint64_t i_clr_rqpd : 1;
+ uint64_t i_clr_rppd : 1;
+ uint64_t i_rsvd_2 : 2;
+ uint64_t i_fc_cnt : 4;
+ uint64_t i_crb_vld : 15;
+ uint64_t i_crb_mark : 15;
+ uint64_t i_rsvd_1 : 2;
+ uint64_t i_precise : 1;
+ uint64_t i_rsvd : 11;
+ } ii_icmr_fld_s;
+} ii_icmr_u_t;
+
+
+/************************************************************************
+ * *
+ * This register allows control of the table portion of the CRB *
+ * logic via software. Control operations from this register have *
+ * priority over all incoming Crosstalk or BTE requests. *
+ * *
+ ************************************************************************/
+
+typedef union ii_iccr_u {
+ uint64_t ii_iccr_regval;
+ struct {
+ uint64_t i_crb_num : 4;
+ uint64_t i_rsvd_1 : 4;
+ uint64_t i_cmd : 8;
+ uint64_t i_pending : 1;
+ uint64_t i_rsvd : 47;
+ } ii_iccr_fld_s;
+} ii_iccr_u_t;
+
+
+/************************************************************************
+ * *
+ * This register allows the maximum timeout value to be programmed. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icto_u {
+ uint64_t ii_icto_regval;
+ struct {
+ uint64_t i_timeout : 8;
+ uint64_t i_rsvd : 56;
+ } ii_icto_fld_s;
+} ii_icto_u_t;
+
+
+/************************************************************************
+ * *
+ * This register allows the timeout prescalar to be programmed. An *
+ * internal counter is associated with this register. When the *
+ * internal counter reaches the value of the PRESCALE field, the *
+ * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT] *
+ * field). The internal counter resets to zero, and then continues *
+ * counting. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ictp_u {
+ uint64_t ii_ictp_regval;
+ struct {
+ uint64_t i_prescale : 24;
+ uint64_t i_rsvd : 40;
+ } ii_ictp_fld_s;
+} ii_ictp_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
+ * used for Crosstalk operations (both cacheline and partial *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five *
+ * registers (_A to _E) are required to read and write each entry. *
+ * The CRB Entry registers can be conceptualized as rows and columns *
+ * (illustrated in the table above). Each row contains the 4 *
+ * registers required for a single CRB Entry. The first doubleword *
+ * (column) for each entry is labeled A, and the second doubleword *
+ * (higher address) is labeled B, the third doubleword is labeled C, *
+ * the fourth doubleword is labeled D and the fifth doubleword is *
+ * labeled E. All CRB entries have their addresses on a quarter *
+ * cacheline aligned boundary. *
+ * Upon reset, only the following fields are initialized: valid *
+ * (VLD), priority count, timeout, timeout valid, and context valid. *
+ * All other bits should be cleared by software before use (after *
+ * recovering any potential error state from before the reset). *
+ * The following four tables summarize the format for the four *
+ * registers that are used for each ICRB# Entry. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icrb0_a_u {
+ uint64_t ii_icrb0_a_regval;
+ struct {
+ uint64_t ia_iow : 1;
+ uint64_t ia_vld : 1;
+ uint64_t ia_addr : 47;
+ uint64_t ia_tnum : 5;
+ uint64_t ia_sidn : 4;
+ uint64_t ia_rsvd : 6;
+ } ii_icrb0_a_fld_s;
+} ii_icrb0_a_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
+ * used for Crosstalk operations (both cacheline and partial *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five *
+ * registers (_A to _E) are required to read and write each entry. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icrb0_b_u {
+ uint64_t ii_icrb0_b_regval;
+ struct {
+ uint64_t ib_xt_err : 1;
+ uint64_t ib_mark : 1;
+ uint64_t ib_ln_uce : 1;
+ uint64_t ib_errcode : 3;
+ uint64_t ib_error : 1;
+ uint64_t ib_stall__bte_1 : 1;
+ uint64_t ib_stall__bte_0 : 1;
+ uint64_t ib_stall__intr : 1;
+ uint64_t ib_stall_ib : 1;
+ uint64_t ib_intvn : 1;
+ uint64_t ib_wb : 1;
+ uint64_t ib_hold : 1;
+ uint64_t ib_ack : 1;
+ uint64_t ib_resp : 1;
+ uint64_t ib_ack_cnt : 11;
+ uint64_t ib_rsvd : 7;
+ uint64_t ib_exc : 5;
+ uint64_t ib_init : 3;
+ uint64_t ib_imsg : 8;
+ uint64_t ib_imsgtype : 2;
+ uint64_t ib_use_old : 1;
+ uint64_t ib_rsvd_1 : 11;
+ } ii_icrb0_b_fld_s;
+} ii_icrb0_b_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
+ * used for Crosstalk operations (both cacheline and partial *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five *
+ * registers (_A to _E) are required to read and write each entry. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icrb0_c_u {
+ uint64_t ii_icrb0_c_regval;
+ struct {
+ uint64_t ic_source : 15;
+ uint64_t ic_size : 2;
+ uint64_t ic_ct : 1;
+ uint64_t ic_bte_num : 1;
+ uint64_t ic_gbr : 1;
+ uint64_t ic_resprqd : 1;
+ uint64_t ic_bo : 1;
+ uint64_t ic_suppl : 15;
+ uint64_t ic_rsvd : 27;
+ } ii_icrb0_c_fld_s;
+} ii_icrb0_c_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
+ * used for Crosstalk operations (both cacheline and partial *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five *
+ * registers (_A to _E) are required to read and write each entry. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icrb0_d_u {
+ uint64_t ii_icrb0_d_regval;
+ struct {
+ uint64_t id_pa_be : 43;
+ uint64_t id_bte_op : 1;
+ uint64_t id_pr_psc : 4;
+ uint64_t id_pr_cnt : 4;
+ uint64_t id_sleep : 1;
+ uint64_t id_rsvd : 11;
+ } ii_icrb0_d_fld_s;
+} ii_icrb0_d_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
+ * used for Crosstalk operations (both cacheline and partial *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five *
+ * registers (_A to _E) are required to read and write each entry. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icrb0_e_u {
+ uint64_t ii_icrb0_e_regval;
+ struct {
+ uint64_t ie_timeout : 8;
+ uint64_t ie_context : 15;
+ uint64_t ie_rsvd : 1;
+ uint64_t ie_tvld : 1;
+ uint64_t ie_cvld : 1;
+ uint64_t ie_rsvd_0 : 38;
+ } ii_icrb0_e_fld_s;
+} ii_icrb0_e_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the lower 64 bits of the header of the *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR *
+ * register is set. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icsml_u {
+ uint64_t ii_icsml_regval;
+ struct {
+ uint64_t i_tt_addr : 47;
+ uint64_t i_newsuppl_ex : 14;
+ uint64_t i_reserved : 2;
+ uint64_t i_overflow : 1;
+ } ii_icsml_fld_s;
+} ii_icsml_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the middle 64 bits of the header of the *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR *
+ * register is set. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icsmm_u {
+ uint64_t ii_icsmm_regval;
+ struct {
+ uint64_t i_tt_ack_cnt : 11;
+ uint64_t i_reserved : 53;
+ } ii_icsmm_fld_s;
+} ii_icsmm_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the microscopic state, all the inputs to *
+ * the protocol table, captured with the spurious message. Valid when *
+ * the SP_MSG bit in the ICMR register is set. *
+ * *
+ ************************************************************************/
+
+typedef union ii_icsmh_u {
+ uint64_t ii_icsmh_regval;
+ struct {
+ uint64_t i_tt_vld : 1;
+ uint64_t i_xerr : 1;
+ uint64_t i_ft_cwact_o : 1;
+ uint64_t i_ft_wact_o : 1;
+ uint64_t i_ft_active_o : 1;
+ uint64_t i_sync : 1;
+ uint64_t i_mnusg : 1;
+ uint64_t i_mnusz : 1;
+ uint64_t i_plusz : 1;
+ uint64_t i_plusg : 1;
+ uint64_t i_tt_exc : 5;
+ uint64_t i_tt_wb : 1;
+ uint64_t i_tt_hold : 1;
+ uint64_t i_tt_ack : 1;
+ uint64_t i_tt_resp : 1;
+ uint64_t i_tt_intvn : 1;
+ uint64_t i_g_stall_bte1 : 1;
+ uint64_t i_g_stall_bte0 : 1;
+ uint64_t i_g_stall_il : 1;
+ uint64_t i_g_stall_ib : 1;
+ uint64_t i_tt_imsg : 8;
+ uint64_t i_tt_imsgtype : 2;
+ uint64_t i_tt_use_old : 1;
+ uint64_t i_tt_respreqd : 1;
+ uint64_t i_tt_bte_num : 1;
+ uint64_t i_cbn : 1;
+ uint64_t i_match : 1;
+ uint64_t i_rpcnt_lt_34 : 1;
+ uint64_t i_rpcnt_ge_34 : 1;
+ uint64_t i_rpcnt_lt_18 : 1;
+ uint64_t i_rpcnt_ge_18 : 1;
+ uint64_t i_rpcnt_lt_2 : 1;
+ uint64_t i_rpcnt_ge_2 : 1;
+ uint64_t i_rqcnt_lt_18 : 1;
+ uint64_t i_rqcnt_ge_18 : 1;
+ uint64_t i_rqcnt_lt_2 : 1;
+ uint64_t i_rqcnt_ge_2 : 1;
+ uint64_t i_tt_device : 7;
+ uint64_t i_tt_init : 3;
+ uint64_t i_reserved : 5;
+ } ii_icsmh_fld_s;
+} ii_icsmh_u_t;
+
+
+/************************************************************************
+ * *
+ * The Shub DEBUG unit provides a 3-bit selection signal to the *
+ * II core and a 3-bit selection signal to the fsbclk domain in the II *
+ * wrapper. *
+ * *
+ ************************************************************************/
+
+typedef union ii_idbss_u {
+ uint64_t ii_idbss_regval;
+ struct {
+ uint64_t i_iioclk_core_submenu : 3;
+ uint64_t i_rsvd : 5;
+ uint64_t i_fsbclk_wrapper_submenu : 3;
+ uint64_t i_rsvd_1 : 5;
+ uint64_t i_iioclk_menu : 5;
+ uint64_t i_rsvd_2 : 43;
+ } ii_idbss_fld_s;
+} ii_idbss_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: This register is used to set up the length for a *
+ * transfer and then to monitor the progress of that transfer. This *
+ * register needs to be initialized before a transfer is started. A *
+ * legitimate write to this register will set the Busy bit, clear the *
+ * Error bit, and initialize the length to the value desired. *
+ * While the transfer is in progress, hardware will decrement the *
+ * length field with each successful block that is copied. Once the *
+ * transfer completes, hardware will clear the Busy bit. The length *
+ * field will also contain the number of cache lines left to be *
+ * transferred. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibls0_u {
+ uint64_t ii_ibls0_regval;
+ struct {
+ uint64_t i_length : 16;
+ uint64_t i_error : 1;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_busy : 1;
+ uint64_t i_rsvd : 43;
+ } ii_ibls0_fld_s;
+} ii_ibls0_u_t;
+
+
+/************************************************************************
+ * *
+ * This register should be loaded before a transfer is started. The *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
+ * address as described in Section 1.3, Figure2 and Figure3. Since *
+ * the bottom 7 bits of the address are always taken to be zero, BTE *
+ * transfers are always cacheline-aligned. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibsa0_u {
+ uint64_t ii_ibsa0_regval;
+ struct {
+ uint64_t i_rsvd_1 : 7;
+ uint64_t i_addr : 42;
+ uint64_t i_rsvd : 15;
+ } ii_ibsa0_fld_s;
+} ii_ibsa0_u_t;
+
+
+/************************************************************************
+ * *
+ * This register should be loaded before a transfer is started. The *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
+ * address as described in Section 1.3, Figure2 and Figure3. Since *
+ * the bottom 7 bits of the address are always taken to be zero, BTE *
+ * transfers are always cacheline-aligned. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibda0_u {
+ uint64_t ii_ibda0_regval;
+ struct {
+ uint64_t i_rsvd_1 : 7;
+ uint64_t i_addr : 42;
+ uint64_t i_rsvd : 15;
+ } ii_ibda0_fld_s;
+} ii_ibda0_u_t;
+
+
+/************************************************************************
+ * *
+ * Writing to this register sets up the attributes of the transfer *
+ * and initiates the transfer operation. Reading this register has *
+ * the side effect of terminating any transfer in progress. Note: *
+ * stopping a transfer midstream could have an adverse impact on the *
+ * other BTE. If a BTE stream has to be stopped (due to error *
+ * handling for example), both BTE streams should be stopped and *
+ * their transfers discarded. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibct0_u {
+ uint64_t ii_ibct0_regval;
+ struct {
+ uint64_t i_zerofill : 1;
+ uint64_t i_rsvd_2 : 3;
+ uint64_t i_notify : 1;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_poison : 1;
+ uint64_t i_rsvd : 55;
+ } ii_ibct0_fld_s;
+} ii_ibct0_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the address to which the WINV is sent. *
+ * This address has to be cache line aligned. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibna0_u {
+ uint64_t ii_ibna0_regval;
+ struct {
+ uint64_t i_rsvd_1 : 7;
+ uint64_t i_addr : 42;
+ uint64_t i_rsvd : 15;
+ } ii_ibna0_fld_s;
+} ii_ibna0_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the programmable level as well as the node *
+ * ID and PI unit of the processor to which the interrupt will be *
+ * sent. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibia0_u {
+ uint64_t ii_ibia0_regval;
+ struct {
+ uint64_t i_rsvd_2 : 1;
+ uint64_t i_node_id : 11;
+ uint64_t i_rsvd_1 : 4;
+ uint64_t i_level : 7;
+ uint64_t i_rsvd : 41;
+ } ii_ibia0_fld_s;
+} ii_ibia0_u_t;
+
+
+/************************************************************************
+ * *
+ * Description: This register is used to set up the length for a *
+ * transfer and then to monitor the progress of that transfer. This *
+ * register needs to be initialized before a transfer is started. A *
+ * legitimate write to this register will set the Busy bit, clear the *
+ * Error bit, and initialize the length to the value desired. *
+ * While the transfer is in progress, hardware will decrement the *
+ * length field with each successful block that is copied. Once the *
+ * transfer completes, hardware will clear the Busy bit. The length *
+ * field will also contain the number of cache lines left to be *
+ * transferred. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibls1_u {
+ uint64_t ii_ibls1_regval;
+ struct {
+ uint64_t i_length : 16;
+ uint64_t i_error : 1;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_busy : 1;
+ uint64_t i_rsvd : 43;
+ } ii_ibls1_fld_s;
+} ii_ibls1_u_t;
+
+
+/************************************************************************
+ * *
+ * This register should be loaded before a transfer is started. The *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
+ * address as described in Section 1.3, Figure2 and Figure3. Since *
+ * the bottom 7 bits of the address are always taken to be zero, BTE *
+ * transfers are always cacheline-aligned. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibsa1_u {
+ uint64_t ii_ibsa1_regval;
+ struct {
+ uint64_t i_rsvd_1 : 7;
+ uint64_t i_addr : 33;
+ uint64_t i_rsvd : 24;
+ } ii_ibsa1_fld_s;
+} ii_ibsa1_u_t;
+
+
+/************************************************************************
+ * *
+ * This register should be loaded before a transfer is started. The *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
+ * address as described in Section 1.3, Figure2 and Figure3. Since *
+ * the bottom 7 bits of the address are always taken to be zero, BTE *
+ * transfers are always cacheline-aligned. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibda1_u {
+ uint64_t ii_ibda1_regval;
+ struct {
+ uint64_t i_rsvd_1 : 7;
+ uint64_t i_addr : 33;
+ uint64_t i_rsvd : 24;
+ } ii_ibda1_fld_s;
+} ii_ibda1_u_t;
+
+
+/************************************************************************
+ * *
+ * Writing to this register sets up the attributes of the transfer *
+ * and initiates the transfer operation. Reading this register has *
+ * the side effect of terminating any transfer in progress. Note: *
+ * stopping a transfer midstream could have an adverse impact on the *
+ * other BTE. If a BTE stream has to be stopped (due to error *
+ * handling for example), both BTE streams should be stopped and *
+ * their transfers discarded. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibct1_u {
+ uint64_t ii_ibct1_regval;
+ struct {
+ uint64_t i_zerofill : 1;
+ uint64_t i_rsvd_2 : 3;
+ uint64_t i_notify : 1;
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_poison : 1;
+ uint64_t i_rsvd : 55;
+ } ii_ibct1_fld_s;
+} ii_ibct1_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the address to which the WINV is sent. *
+ * This address has to be cache line aligned. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibna1_u {
+ uint64_t ii_ibna1_regval;
+ struct {
+ uint64_t i_rsvd_1 : 7;
+ uint64_t i_addr : 33;
+ uint64_t i_rsvd : 24;
+ } ii_ibna1_fld_s;
+} ii_ibna1_u_t;
+
+
+/************************************************************************
+ * *
+ * This register contains the programmable level as well as the node *
+ * ID and PI unit of the processor to which the interrupt will be *
+ * sent. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ibia1_u {
+ uint64_t ii_ibia1_regval;
+ struct {
+ uint64_t i_pi_id : 1;
+ uint64_t i_node_id : 8;
+ uint64_t i_rsvd_1 : 7;
+ uint64_t i_level : 7;
+ uint64_t i_rsvd : 41;
+ } ii_ibia1_fld_s;
+} ii_ibia1_u_t;
+
+
+/************************************************************************
+ * *
+ * This register defines the resources that feed information into *
+ * the two performance counters located in the IO Performance *
+ * Profiling Register. There are 17 different quantities that can be *
+ * measured. Given these 17 different options, the two performance *
+ * counters have 15 of them in common; menu selections 0 through 0xE *
+ * are identical for each performance counter. As for the other two *
+ * options, one is available from one performance counter and the *
+ * other is available from the other performance counter. Hence, the *
+ * II supports all 17*16=272 possible combinations of quantities to *
+ * measure. *
+ * *
+ ************************************************************************/
+
+typedef union ii_ipcr_u {
+ uint64_t ii_ipcr_regval;
+ struct {
+ uint64_t i_ippr0_c : 4;
+ uint64_t i_ippr1_c : 4;
+ uint64_t i_icct : 8;
+ uint64_t i_rsvd : 48;
+ } ii_ipcr_fld_s;
+} ii_ipcr_u_t;
+
+
+/************************************************************************
+ * *
+ * *
+ * *
+ ************************************************************************/
+
+typedef union ii_ippr_u {
+ uint64_t ii_ippr_regval;
+ struct {
+ uint64_t i_ippr0 : 32;
+ uint64_t i_ippr1 : 32;
+ } ii_ippr_fld_s;
+} ii_ippr_u_t;
+
+
+
+/**************************************************************************
+ * *
+ * The following defines which were not formed into structures are *
+ * probably indentical to another register, and the name of the *
+ * register is provided against each of these registers. This *
+ * information needs to be checked carefully *
+ * *
+ * IIO_ICRB1_A IIO_ICRB0_A *
+ * IIO_ICRB1_B IIO_ICRB0_B *
+ * IIO_ICRB1_C IIO_ICRB0_C *
+ * IIO_ICRB1_D IIO_ICRB0_D *
+ * IIO_ICRB1_E IIO_ICRB0_E *
+ * IIO_ICRB2_A IIO_ICRB0_A *
+ * IIO_ICRB2_B IIO_ICRB0_B *
+ * IIO_ICRB2_C IIO_ICRB0_C *
+ * IIO_ICRB2_D IIO_ICRB0_D *
+ * IIO_ICRB2_E IIO_ICRB0_E *
+ * IIO_ICRB3_A IIO_ICRB0_A *
+ * IIO_ICRB3_B IIO_ICRB0_B *
+ * IIO_ICRB3_C IIO_ICRB0_C *
+ * IIO_ICRB3_D IIO_ICRB0_D *
+ * IIO_ICRB3_E IIO_ICRB0_E *
+ * IIO_ICRB4_A IIO_ICRB0_A *
+ * IIO_ICRB4_B IIO_ICRB0_B *
+ * IIO_ICRB4_C IIO_ICRB0_C *
+ * IIO_ICRB4_D IIO_ICRB0_D *
+ * IIO_ICRB4_E IIO_ICRB0_E *
+ * IIO_ICRB5_A IIO_ICRB0_A *
+ * IIO_ICRB5_B IIO_ICRB0_B *
+ * IIO_ICRB5_C IIO_ICRB0_C *
+ * IIO_ICRB5_D IIO_ICRB0_D *
+ * IIO_ICRB5_E IIO_ICRB0_E *
+ * IIO_ICRB6_A IIO_ICRB0_A *
+ * IIO_ICRB6_B IIO_ICRB0_B *
+ * IIO_ICRB6_C IIO_ICRB0_C *
+ * IIO_ICRB6_D IIO_ICRB0_D *
+ * IIO_ICRB6_E IIO_ICRB0_E *
+ * IIO_ICRB7_A IIO_ICRB0_A *
+ * IIO_ICRB7_B IIO_ICRB0_B *
+ * IIO_ICRB7_C IIO_ICRB0_C *
+ * IIO_ICRB7_D IIO_ICRB0_D *
+ * IIO_ICRB7_E IIO_ICRB0_E *
+ * IIO_ICRB8_A IIO_ICRB0_A *
+ * IIO_ICRB8_B IIO_ICRB0_B *
+ * IIO_ICRB8_C IIO_ICRB0_C *
+ * IIO_ICRB8_D IIO_ICRB0_D *
+ * IIO_ICRB8_E IIO_ICRB0_E *
+ * IIO_ICRB9_A IIO_ICRB0_A *
+ * IIO_ICRB9_B IIO_ICRB0_B *
+ * IIO_ICRB9_C IIO_ICRB0_C *
+ * IIO_ICRB9_D IIO_ICRB0_D *
+ * IIO_ICRB9_E IIO_ICRB0_E *
+ * IIO_ICRBA_A IIO_ICRB0_A *
+ * IIO_ICRBA_B IIO_ICRB0_B *
+ * IIO_ICRBA_C IIO_ICRB0_C *
+ * IIO_ICRBA_D IIO_ICRB0_D *
+ * IIO_ICRBA_E IIO_ICRB0_E *
+ * IIO_ICRBB_A IIO_ICRB0_A *
+ * IIO_ICRBB_B IIO_ICRB0_B *
+ * IIO_ICRBB_C IIO_ICRB0_C *
+ * IIO_ICRBB_D IIO_ICRB0_D *
+ * IIO_ICRBB_E IIO_ICRB0_E *
+ * IIO_ICRBC_A IIO_ICRB0_A *
+ * IIO_ICRBC_B IIO_ICRB0_B *
+ * IIO_ICRBC_C IIO_ICRB0_C *
+ * IIO_ICRBC_D IIO_ICRB0_D *
+ * IIO_ICRBC_E IIO_ICRB0_E *
+ * IIO_ICRBD_A IIO_ICRB0_A *
+ * IIO_ICRBD_B IIO_ICRB0_B *
+ * IIO_ICRBD_C IIO_ICRB0_C *
+ * IIO_ICRBD_D IIO_ICRB0_D *
+ * IIO_ICRBD_E IIO_ICRB0_E *
+ * IIO_ICRBE_A IIO_ICRB0_A *
+ * IIO_ICRBE_B IIO_ICRB0_B *
+ * IIO_ICRBE_C IIO_ICRB0_C *
+ * IIO_ICRBE_D IIO_ICRB0_D *
+ * IIO_ICRBE_E IIO_ICRB0_E *
+ * *
+ **************************************************************************/
+
+
+/*
+ * Slightly friendlier names for some common registers.
+ */
+#define IIO_WIDGET IIO_WID /* Widget identification */
+#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */
+#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */
+#define IIO_PROTECT IIO_ILAPR /* IO interface protection */
+#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */
+#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */
+#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */
+#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */
+#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */
+#define IIO_LLP_LOG IIO_ILLR /* LLP log */
+#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout*/
+#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */
+#define IIO_IGFX_0 IIO_IGFX0
+#define IIO_IGFX_1 IIO_IGFX1
+#define IIO_IBCT_0 IIO_IBCT0
+#define IIO_IBCT_1 IIO_IBCT1
+#define IIO_IBLS_0 IIO_IBLS0
+#define IIO_IBLS_1 IIO_IBLS1
+#define IIO_IBSA_0 IIO_IBSA0
+#define IIO_IBSA_1 IIO_IBSA1
+#define IIO_IBDA_0 IIO_IBDA0
+#define IIO_IBDA_1 IIO_IBDA1
+#define IIO_IBNA_0 IIO_IBNA0
+#define IIO_IBNA_1 IIO_IBNA1
+#define IIO_IBIA_0 IIO_IBIA0
+#define IIO_IBIA_1 IIO_IBIA1
+#define IIO_IOPRB_0 IIO_IPRB0
+
+#define IIO_PRTE_A(_x) (IIO_IPRTE0_A + (8 * (_x)))
+#define IIO_PRTE_B(_x) (IIO_IPRTE0_B + (8 * (_x)))
+#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */
+#define IIO_WIDPRTE_A(x) IIO_PRTE_A(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_WIDPRTE_B(x) IIO_PRTE_B(((x) - 8)) /* widget ID to its PRTE num */
+
+#define IIO_NUM_IPRBS (9)
+
+#define IIO_LLP_CSR_IS_UP 0x00002000
+#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000
+#define IIO_LLP_CSR_LLP_STAT_SHFT 12
+
+#define IIO_LLP_CB_MAX 0xffff /* in ILLR CB_CNT, Max Check Bit errors */
+#define IIO_LLP_SN_MAX 0xffff /* in ILLR SN_CNT, Max Sequence Number errors */
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */
+#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */
+#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1 (IIO_IBLS_1 - IIO_IBLS_0) /* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT 0
+#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+
+/* names used in shub diags */
+#define IIO_BASE_BTE0 IIO_IBLS_0
+#define IIO_BASE_BTE1 IIO_IBLS_1
+
+/*
+ * Macro which takes the widget number, and returns the
+ * IO PRB address of that widget.
+ * value _x is expected to be a widget number in the range
+ * 0, 8 - 0xF
+ */
+#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+ (_x) : \
+ (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
+
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK ((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT 0
+#define IIO_IGFX_PI_NUM_BITS 1 /* size of PI num field */
+#define IIO_IGFX_PI_NUM_MASK ((1<<IIO_IGFX_PI_NUM_BITS)-1)
+#define IIO_IGFX_PI_NUM_SHIFT 4
+#define IIO_IGFX_N_NUM_BITS 8 /* size of node num field */
+#define IIO_IGFX_N_NUM_MASK ((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT 5
+#define IIO_IGFX_P_NUM_BITS 1 /* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK ((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT 16
+#define IIO_IGFX_INIT(widget, pi, node, cpu) (\
+ (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \
+ (((pi) & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)| \
+ (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \
+ (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT))
+
+
+/* Scratch registers (all bits available) */
+#define IIO_SCRATCH_REG0 IIO_ISCR0
+#define IIO_SCRATCH_REG1 IIO_ISCR1
+#define IIO_SCRATCH_MASK 0xffffffffffffffffUL
+
+#define IIO_SCRATCH_BIT0_0 0x0000000000000001UL
+#define IIO_SCRATCH_BIT0_1 0x0000000000000002UL
+#define IIO_SCRATCH_BIT0_2 0x0000000000000004UL
+#define IIO_SCRATCH_BIT0_3 0x0000000000000008UL
+#define IIO_SCRATCH_BIT0_4 0x0000000000000010UL
+#define IIO_SCRATCH_BIT0_5 0x0000000000000020UL
+#define IIO_SCRATCH_BIT0_6 0x0000000000000040UL
+#define IIO_SCRATCH_BIT0_7 0x0000000000000080UL
+#define IIO_SCRATCH_BIT0_8 0x0000000000000100UL
+#define IIO_SCRATCH_BIT0_9 0x0000000000000200UL
+#define IIO_SCRATCH_BIT0_A 0x0000000000000400UL
+
+#define IIO_SCRATCH_BIT1_0 0x0000000000000001UL
+#define IIO_SCRATCH_BIT1_1 0x0000000000000002UL
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES 7 /* ITTEs numbered 0..6 */
+ /* Hw manuals number them 1..7! */
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD 0x1UL /* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD (1UL << 4) /* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD (1UL << 8) /* BTE 1 Shut down due to error */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the shub, we've
+ * redefined big window 7 as small window 0.
+ XXX does this still apply for SN1??
+ */
+#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1)
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET 0x100
+
+/*
+ * CRB manipulation macros
+ * The CRB macros are slightly complicated, since there are up to
+ * four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS 15 /* Number of CRBs */
+#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET 8
+#define IIO_ICRB_0 IIO_ICRB0_A
+#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */
+/* XXX - This is now tuneable:
+ #define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x) ((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x))))
+#define IIO_ICRB_B(_x) ((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET))
+#define IIO_ICRB_C(_x) ((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET))
+#define IIO_ICRB_D(_x) ((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET))
+#define IIO_ICRB_E(_x) ((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET))
+
+#define TNUM_TO_WIDGET_DEV(_tnum) (_tnum & 0x7)
+
+/*
+ * values for "ecode" field
+ */
+#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */
+#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */
+#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access
+ * e.g. WINV to a Read only line. */
+#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */
+#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */
+#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */
+#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */
+#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */
+
+/*
+ * Values for field imsgtype
+ */
+#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */
+#define IIO_ICRB_IMSGT_SN1NET 2 /* Incoming message from SN1 net */
+#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */
+
+/*
+ * values for field initiator.
+ */
+#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */
+#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */
+#define IIO_ICRB_INIT_SN1NET 0x2 /* Message originated in SN1net */
+#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */
+#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define HUBII_XBOW_CREDIT 3
+#define HUBII_XBOW_REV2_CREDIT 4
+
+/*
+ * Number of credits that xtalk devices should use when communicating
+ * with a SHub (depth of SHub's queue).
+ */
+#define HUB_CREDIT 4
+
+/*
+ * Some IIO_PRB fields
+ */
+#define IIO_PRB_MULTI_ERR (1LL << 63)
+#define IIO_PRB_SPUR_RD (1LL << 51)
+#define IIO_PRB_SPUR_WR (1LL << 50)
+#define IIO_PRB_RD_TO (1LL << 49)
+#define IIO_PRB_ERROR (1LL << 48)
+
+/*************************************************************************
+
+ Some of the IIO field masks and shifts are defined here.
+ This is in order to maintain compatibility in SN0 and SN1 code
+
+**************************************************************************/
+
+/*
+ * ICMR register fields
+ * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not
+ * present in SHub)
+ */
+
+#define IIO_ICMR_CRB_VLD_SHFT 20
+#define IIO_ICMR_CRB_VLD_MASK (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT 16
+#define IIO_ICMR_FC_CNT_MASK (0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT 4
+#define IIO_ICMR_C_CNT_MASK (0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE (1UL << 52)
+#define IIO_ICMR_CLR_RPPD (1UL << 13)
+#define IIO_ICMR_CLR_RQPD (1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ XXX present but not needed in bedrock? See the manual.
+ */
+#define IIO_IPDR_PND (1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define IIO_ICDR_PND (1 << 4)
+
+/*
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY (0x1UL << 20)
+#define IBLS_ERROR_SHFT 16
+#define IBLS_ERROR (0x1UL << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK 0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON (0x1UL << 8)
+#define IBCT_NOTIFY (0x1UL << 4)
+#define IBCT_ZFIL_MODE (0x1UL << 0)
+
+/*
+ * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2)
+ */
+#define IIEPH1_VALID (1UL << 44)
+#define IIEPH1_OVERRUN (1UL << 40)
+#define IIEPH1_ERR_TYPE_SHFT 32
+#define IIEPH1_ERR_TYPE_MASK 0xf
+#define IIEPH1_SOURCE_SHFT 20
+#define IIEPH1_SOURCE_MASK 11
+#define IIEPH1_SUPPL_SHFT 8
+#define IIEPH1_SUPPL_MASK 11
+#define IIEPH1_CMD_SHFT 0
+#define IIEPH1_CMD_MASK 7
+
+#define IIEPH2_TAIL (1UL << 40)
+#define IIEPH2_ADDRESS_SHFT 0
+#define IIEPH2_ADDRESS_MASK 38
+
+#define IIEPH1_ERR_SHORT_REQ 2
+#define IIEPH1_ERR_SHORT_REPLY 3
+#define IIEPH1_ERR_LONG_REQ 4
+#define IIEPH1_ERR_LONG_REPLY 5
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_PI1_FWD_INT (1UL << 31) /* clear PI1_FORWARD_INT in iidsr */
+#define IECLR_PI0_FWD_INT (1UL << 30) /* clear PI0_FORWARD_INT in iidsr */
+#define IECLR_SPUR_RD_HDR (1UL << 29) /* clear valid bit in ixss reg */
+#define IECLR_BTE1 (1UL << 18) /* clear bte error 1 */
+#define IECLR_BTE0 (1UL << 17) /* clear bte error 0 */
+#define IECLR_CRAZY (1UL << 16) /* clear crazy bit in wstat reg */
+#define IECLR_PRB_F (1UL << 15) /* clear err bit in PRB_F reg */
+#define IECLR_PRB_E (1UL << 14) /* clear err bit in PRB_E reg */
+#define IECLR_PRB_D (1UL << 13) /* clear err bit in PRB_D reg */
+#define IECLR_PRB_C (1UL << 12) /* clear err bit in PRB_C reg */
+#define IECLR_PRB_B (1UL << 11) /* clear err bit in PRB_B reg */
+#define IECLR_PRB_A (1UL << 10) /* clear err bit in PRB_A reg */
+#define IECLR_PRB_9 (1UL << 9) /* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8 (1UL << 8) /* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0 (1UL << 0) /* clear err bit in PRB_0 reg */
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR
+ */
+#define IIO_ICCR_PENDING (0x10000)
+#define IIO_ICCR_CMD_MASK (0xFF)
+#define IIO_ICCR_CMD_SHFT (7)
+#define IIO_ICCR_CMD_NOP (0x0) /* No Op */
+#define IIO_ICCR_CMD_WAKE (0x100) /* Reactivate CRB entry and process */
+#define IIO_ICCR_CMD_TIMEOUT (0x200) /* Make CRB timeout & mark invalid */
+#define IIO_ICCR_CMD_EJECT (0x400) /* Contents of entry written to memory
+ * via a WB
+ */
+#define IIO_ICCR_CMD_FLUSH (0x800)
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to shub IIO's status.
+ * Quiescing implies no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Easy access macros for CRBs, all 5 registers (A-E)
+ */
+typedef ii_icrb0_a_u_t icrba_t;
+#define a_sidn ii_icrb0_a_fld_s.ia_sidn
+#define a_tnum ii_icrb0_a_fld_s.ia_tnum
+#define a_addr ii_icrb0_a_fld_s.ia_addr
+#define a_valid ii_icrb0_a_fld_s.ia_vld
+#define a_iow ii_icrb0_a_fld_s.ia_iow
+#define a_regvalue ii_icrb0_a_regval
+
+typedef ii_icrb0_b_u_t icrbb_t;
+#define b_use_old ii_icrb0_b_fld_s.ib_use_old
+#define b_imsgtype ii_icrb0_b_fld_s.ib_imsgtype
+#define b_imsg ii_icrb0_b_fld_s.ib_imsg
+#define b_initiator ii_icrb0_b_fld_s.ib_init
+#define b_exc ii_icrb0_b_fld_s.ib_exc
+#define b_ackcnt ii_icrb0_b_fld_s.ib_ack_cnt
+#define b_resp ii_icrb0_b_fld_s.ib_resp
+#define b_ack ii_icrb0_b_fld_s.ib_ack
+#define b_hold ii_icrb0_b_fld_s.ib_hold
+#define b_wb ii_icrb0_b_fld_s.ib_wb
+#define b_intvn ii_icrb0_b_fld_s.ib_intvn
+#define b_stall_ib ii_icrb0_b_fld_s.ib_stall_ib
+#define b_stall_int ii_icrb0_b_fld_s.ib_stall__intr
+#define b_stall_bte_0 ii_icrb0_b_fld_s.ib_stall__bte_0
+#define b_stall_bte_1 ii_icrb0_b_fld_s.ib_stall__bte_1
+#define b_error ii_icrb0_b_fld_s.ib_error
+#define b_ecode ii_icrb0_b_fld_s.ib_errcode
+#define b_lnetuce ii_icrb0_b_fld_s.ib_ln_uce
+#define b_mark ii_icrb0_b_fld_s.ib_mark
+#define b_xerr ii_icrb0_b_fld_s.ib_xt_err
+#define b_regvalue ii_icrb0_b_regval
+
+typedef ii_icrb0_c_u_t icrbc_t;
+#define c_suppl ii_icrb0_c_fld_s.ic_suppl
+#define c_barrop ii_icrb0_c_fld_s.ic_bo
+#define c_doresp ii_icrb0_c_fld_s.ic_resprqd
+#define c_gbr ii_icrb0_c_fld_s.ic_gbr
+#define c_btenum ii_icrb0_c_fld_s.ic_bte_num
+#define c_cohtrans ii_icrb0_c_fld_s.ic_ct
+#define c_xtsize ii_icrb0_c_fld_s.ic_size
+#define c_source ii_icrb0_c_fld_s.ic_source
+#define c_regvalue ii_icrb0_c_regval
+
+
+typedef ii_icrb0_d_u_t icrbd_t;
+#define d_sleep ii_icrb0_d_fld_s.id_sleep
+#define d_pricnt ii_icrb0_d_fld_s.id_pr_cnt
+#define d_pripsc ii_icrb0_d_fld_s.id_pr_psc
+#define d_bteop ii_icrb0_d_fld_s.id_bte_op
+#define d_bteaddr ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names*/
+#define d_benable ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names*/
+#define d_regvalue ii_icrb0_d_regval
+
+typedef ii_icrb0_e_u_t icrbe_t;
+#define icrbe_ctxtvld ii_icrb0_e_fld_s.ie_cvld
+#define icrbe_toutvld ii_icrb0_e_fld_s.ie_tvld
+#define icrbe_context ii_icrb0_e_fld_s.ie_context
+#define icrbe_timeout ii_icrb0_e_fld_s.ie_timeout
+#define e_regvalue ii_icrb0_e_regval
+
+
+/* Number of widgets supported by shub */
+#define HUB_NUM_WIDGET 9
+#define HUB_WIDGET_ID_MIN 0x8
+#define HUB_WIDGET_ID_MAX 0xf
+
+#define HUB_WIDGET_PART_NUM 0xc120
+#define MAX_HUBS_PER_XBOW 2
+
+/* A few more #defines for backwards compatibility */
+#define iprb_t ii_iprb0_u_t
+#define iprb_regval ii_iprb0_regval
+#define iprb_mult_err ii_iprb0_fld_s.i_mult_err
+#define iprb_spur_rd ii_iprb0_fld_s.i_spur_rd
+#define iprb_spur_wr ii_iprb0_fld_s.i_spur_wr
+#define iprb_rd_to ii_iprb0_fld_s.i_rd_to
+#define iprb_ovflow ii_iprb0_fld_s.i_of_cnt
+#define iprb_error ii_iprb0_fld_s.i_error
+#define iprb_ff ii_iprb0_fld_s.i_f
+#define iprb_mode ii_iprb0_fld_s.i_m
+#define iprb_bnakctr ii_iprb0_fld_s.i_nb
+#define iprb_anakctr ii_iprb0_fld_s.i_na
+#define iprb_xtalkctr ii_iprb0_fld_s.i_c
+
+#define LNK_STAT_WORKING 0x2 /* LLP is working */
+
+#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */
+#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */
+#define IIO_WSTAT_TXRETRY_MASK (0x7F) /* should be 0xFF?? */
+#define IIO_WSTAT_TXRETRY_SHFT (16)
+#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+ IIO_WSTAT_TXRETRY_MASK)
+
+/* Number of II perf. counters we can multiplex at once */
+
+#define IO_PERF_SETS 32
+
+/* Bit for the widget in inbound access register */
+#define IIO_IIWA_WIDGET(_w) ((uint64_t)(1ULL << _w))
+/* Bit for the widget in outbound access register */
+#define IIO_IOWA_WIDGET(_w) ((uint64_t)(1ULL << _w))
+
+/* NOTE: The following define assumes that we are going to get
+ * widget numbers from 8 thru F and the device numbers within
+ * widget from 0 thru 7.
+ */
+#define IIO_IIDEM_WIDGETDEV_MASK(w, d) ((uint64_t)(1ULL << (8 * ((w) - 8) + (d))))
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT 28
+#define IIO_IIDSR_SENT_MASK 0x30000000
+#define IIO_IIDSR_ENB_SHIFT 24
+#define IIO_IIDSR_ENB_MASK 0x01000000
+#define IIO_IIDSR_NODE_SHIFT 9
+#define IIO_IIDSR_NODE_MASK 0x000ff700
+#define IIO_IIDSR_PI_ID_SHIFT 8
+#define IIO_IIDSR_PI_ID_MASK 0x00000100
+#define IIO_IIDSR_LVL_SHIFT 0
+#define IIO_IIDSR_LVL_MASK 0x000000ff
+
+/* Xtalk timeout threshhold register (IIO_IXTT) */
+#define IXTT_RRSP_TO_SHFT 55 /* read response timeout */
+#define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT)
+#define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */
+#define IXTT_RRSP_PS_MASK (0x7FFFFFULL << IXTT_RRSP_PS_SHFT)
+#define IXTT_TAIL_TO_SHFT 0 /* tail timeout counter threshold */
+#define IXTT_TAIL_TO_MASK (0x3FFFFFFULL << IXTT_TAIL_TO_SHFT)
+
+/*
+ * The IO LLP control status register and widget control register
+ */
+
+typedef union hubii_wcr_u {
+ uint64_t wcr_reg_value;
+ struct {
+ uint64_t wcr_widget_id: 4, /* LLP crossbar credit */
+ wcr_tag_mode: 1, /* Tag mode */
+ wcr_rsvd1: 8, /* Reserved */
+ wcr_xbar_crd: 3, /* LLP crossbar credit */
+ wcr_f_bad_pkt: 1, /* Force bad llp pkt enable */
+ wcr_dir_con: 1, /* widget direct connect */
+ wcr_e_thresh: 5, /* elasticity threshold */
+ wcr_rsvd: 41; /* unused */
+ } wcr_fields_s;
+} hubii_wcr_t;
+
+#define iwcr_dir_con wcr_fields_s.wcr_dir_con
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+ performed */
+
+typedef union io_perf_sel {
+ uint64_t perf_sel_reg;
+ struct {
+ uint64_t perf_ippr0 : 4,
+ perf_ippr1 : 4,
+ perf_icct : 8,
+ perf_rsvd : 48;
+ } perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the shub registers. Due to
+ hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+ uint64_t perf_cnt;
+ struct {
+ uint64_t perf_cnt : 20,
+ perf_rsvd2 : 12,
+ perf_rsvd1 : 32;
+ } perf_cnt_bits;
+
+} io_perf_cnt_t;
+
+typedef union iprte_a {
+ uint64_t entry;
+ struct {
+ uint64_t i_rsvd_1 : 3;
+ uint64_t i_addr : 38;
+ uint64_t i_init : 3;
+ uint64_t i_source : 8;
+ uint64_t i_rsvd : 2;
+ uint64_t i_widget : 4;
+ uint64_t i_to_cnt : 5;
+ uint64_t i_vld : 1;
+ } iprte_fields;
+} iprte_a_t;
+
+#endif /* _ASM_IA64_SN_SHUBIO_H */
+
diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h
new file mode 100644
index 0000000..78eb4f8
--- /dev/null
+++ b/include/asm-ia64/sn/simulator.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SIMULATOR_H
+#define _ASM_IA64_SN_SIMULATOR_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_IA64_SGI_SN_SIM
+
+#define SNMAGIC 0xaeeeeeee8badbeefL
+#define IS_RUNNING_ON_SIMULATOR() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
+
+#define SIMULATOR_SLEEP() asm("nop.i 0x8beef")
+
+#else
+
+#define IS_RUNNING_ON_SIMULATOR() (0)
+#define SIMULATOR_SLEEP()
+
+#endif
+
+#endif /* _ASM_IA64_SN_SIMULATOR_H */
diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/include/asm-ia64/sn/sn2/sn_hwperf.h
new file mode 100644
index 0000000..b0c4d6d
--- /dev/null
+++ b/include/asm-ia64/sn/sn2/sn_hwperf.h
@@ -0,0 +1,226 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
+ *
+ * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring
+ * SGI Altix node and router hardware
+ *
+ * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004
+ */
+
+#ifndef SN_HWPERF_H
+#define SN_HWPERF_H
+
+/*
+ * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO
+ * return an array of these. Do not change this without also
+ * changing the corresponding SAL code.
+ */
+#define SN_HWPERF_MAXSTRING 128
+struct sn_hwperf_object_info {
+ u32 id;
+ union {
+ struct {
+ u64 this_part:1;
+ u64 is_shared:1;
+ } fields;
+ struct {
+ u64 flags;
+ u64 reserved;
+ } b;
+ } f;
+ char name[SN_HWPERF_MAXSTRING];
+ char location[SN_HWPERF_MAXSTRING];
+ u32 ports;
+};
+
+#define sn_hwp_this_part f.fields.this_part
+#define sn_hwp_is_shared f.fields.is_shared
+#define sn_hwp_flags f.b.flags
+
+/* macros for object classification */
+#define SN_HWPERF_IS_NODE(x) ((x) && strstr((x)->name, "SHub"))
+#define SN_HWPERF_IS_IONODE(x) ((x) && strstr((x)->name, "TIO"))
+#define SN_HWPERF_IS_ROUTER(x) ((x) && strstr((x)->name, "Router"))
+#define SN_HWPERF_IS_NL3ROUTER(x) ((x) && strstr((x)->name, "NL3Router"))
+#define SN_HWPERF_FOREIGN(x) ((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
+#define SN_HWPERF_SAME_OBJTYPE(x,y) ((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
+ (SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
+ (SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y)))
+
+/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */
+struct sn_hwperf_port_info {
+ u32 port;
+ u32 conn_id;
+ u32 conn_port;
+};
+
+/* for HWPERF_{GET,SET}_MMRS */
+struct sn_hwperf_data {
+ u64 addr;
+ u64 data;
+};
+
+/* user ioctl() argument, see below */
+struct sn_hwperf_ioctl_args {
+ u64 arg; /* argument, usually an object id */
+ u64 sz; /* size of transfer */
+ void *ptr; /* pointer to source/target */
+ u32 v0; /* second return value */
+};
+
+/*
+ * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE,
+ * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which
+ * to call SAL, and whether to use an interprocessor interrupt
+ * or task migration in order to do so. If the CPU specified is
+ * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used.
+ */
+#define SN_HWPERF_ARG_ANY_CPU 0x7fffffffUL
+#define SN_HWPERF_ARG_CPU_MASK 0x7fffffff00000000ULL
+#define SN_HWPERF_ARG_USE_IPI_MASK 0x8000000000000000ULL
+#define SN_HWPERF_ARG_OBJID_MASK 0x00000000ffffffffULL
+
+/*
+ * ioctl requests on the "sn_hwperf" misc device that call SAL.
+ */
+#define SN_HWPERF_OP_MEM_COPYIN 0x1000
+#define SN_HWPERF_OP_MEM_COPYOUT 0x2000
+#define SN_HWPERF_OP_MASK 0x0fff
+
+/*
+ * Determine mem requirement.
+ * arg don't care
+ * sz 8
+ * p pointer to u64 integer
+ */
+#define SN_HWPERF_GET_HEAPSIZE 1
+
+/*
+ * Install mem for SAL drvr
+ * arg don't care
+ * sz sizeof buffer pointed to by p
+ * p pointer to buffer for scratch area
+ */
+#define SN_HWPERF_INSTALL_HEAP 2
+
+/*
+ * Determine number of objects
+ * arg don't care
+ * sz 8
+ * p pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_COUNT (10|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Determine object "distance", relative to a cpu. This operation can
+ * execute on a designated logical cpu number, using either an IPI or
+ * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg bitmap of IPI flag, cpu number and object id
+ * sz 8
+ * p pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_DISTANCE (11|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate objects. Special case if sz == 8, returns the required
+ * buffer size.
+ * arg don't care
+ * sz sizeof buffer pointed to by p
+ * p pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_ENUM_OBJECTS (12|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate NumaLink ports for an object. Special case if sz == 8,
+ * returns the required buffer size.
+ * arg object id
+ * sz sizeof buffer pointed to by p
+ * p pointer to array of struct sn_hwperf_port_info
+ */
+#define SN_HWPERF_ENUM_PORTS (13|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * SET/GET memory mapped registers. These operations can execute
+ * on a designated logical cpu number, using either an IPI or via
+ * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg bitmap of ipi flag, cpu number and object id
+ * sz sizeof buffer pointed to by p
+ * p pointer to array of struct sn_hwperf_data
+ */
+#define SN_HWPERF_SET_MMRS (14|SN_HWPERF_OP_MEM_COPYIN)
+#define SN_HWPERF_GET_MMRS (15|SN_HWPERF_OP_MEM_COPYOUT| \
+ SN_HWPERF_OP_MEM_COPYIN)
+/*
+ * Lock a shared object
+ * arg object id
+ * sz don't care
+ * p don't care
+ */
+#define SN_HWPERF_ACQUIRE 16
+
+/*
+ * Unlock a shared object
+ * arg object id
+ * sz don't care
+ * p don't care
+ */
+#define SN_HWPERF_RELEASE 17
+
+/*
+ * Break a lock on a shared object
+ * arg object id
+ * sz don't care
+ * p don't care
+ */
+#define SN_HWPERF_FORCE_RELEASE 18
+
+/*
+ * ioctl requests on "sn_hwperf" that do not call SAL
+ */
+
+/*
+ * get cpu info as an array of hwperf_object_info_t.
+ * id is logical CPU number, name is description, location
+ * is geoid (e.g. 001c04#1c). Special case if sz == 8,
+ * returns the required buffer size.
+ *
+ * arg don't care
+ * sz sizeof buffer pointed to by p
+ * p pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_GET_CPU_INFO (100|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given an object id, return it's node number (aka cnode).
+ * arg object id
+ * sz 8
+ * p pointer to u64 integer
+ */
+#define SN_HWPERF_GET_OBJ_NODE (101|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given a node number (cnode), return it's nasid.
+ * arg ordinal node number (aka cnodeid)
+ * sz 8
+ * p pointer to u64 integer
+ */
+#define SN_HWPERF_GET_NODE_NASID (102|SN_HWPERF_OP_MEM_COPYOUT)
+
+/* return codes */
+#define SN_HWPERF_OP_OK 0
+#define SN_HWPERF_OP_NOMEM 1
+#define SN_HWPERF_OP_NO_PERM 2
+#define SN_HWPERF_OP_IO_ERROR 3
+#define SN_HWPERF_OP_BUSY 4
+#define SN_HWPERF_OP_RECONFIGURE 253
+#define SN_HWPERF_OP_INVAL 254
+
+#endif /* SN_HWPERF_H */
diff --git a/include/asm-ia64/sn/sn_cpuid.h b/include/asm-ia64/sn/sn_cpuid.h
new file mode 100644
index 0000000..685435a
--- /dev/null
+++ b/include/asm-ia64/sn/sn_cpuid.h
@@ -0,0 +1,144 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_SN_CPUID_H
+#define _ASM_IA64_SN_SN_CPUID_H
+
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/intrinsics.h>
+
+
+/*
+ * Functions for converting between cpuids, nodeids and NASIDs.
+ *
+ * These are for SGI platforms only.
+ *
+ */
+
+
+
+
+/*
+ * Definitions of terms (these definitions are for IA64 ONLY. Other architectures
+ * use cpuid/cpunum quite defferently):
+ *
+ * CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies
+ * the cpu. The value cpuid has no significance on IA64 other than
+ * the boot cpu is 0.
+ * smp_processor_id() returns the cpuid of the current cpu.
+ *
+ * CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID)
+ * This is the same as 31:24 of the processor LID register
+ * hard_smp_processor_id()- cpu_physical_id of current processor
+ * cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
+ * cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid>
+ * * not real efficient - don't use in perf critical code
+ *
+ * SLICE - a number in the range of 0 - 3 (typically) that represents the
+ * cpu number on a brick.
+ *
+ * SUBNODE - (almost obsolete) the number of the FSB that a cpu is
+ * connected to. This is also the same as the PI number. Usually 0 or 1.
+ *
+ * NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no
+ * significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM.
+ *
+ *
+ * The macros convert between cpu physical ids & slice/nasid/cnodeid.
+ * These terms are described below:
+ *
+ *
+ * Brick
+ * ----- ----- ----- ----- CPU
+ * | 0 | | 1 | | 0 | | 1 | SLICE
+ * ----- ----- ----- -----
+ * | | | |
+ * | | | |
+ * 0 | | 2 0 | | 2 FSB SLOT
+ * ------- -------
+ * | |
+ * | |
+ * | |
+ * ------------ -------------
+ * | | | |
+ * | SHUB | | SHUB | NASID (0..MAX_NASIDS)
+ * | |----- | | CNODEID (0..num_compact_nodes-1)
+ * | | | |
+ * | | | |
+ * ------------ -------------
+ * | |
+ *
+ *
+ */
+
+#ifndef CONFIG_SMP
+#define cpu_physical_id(cpuid) ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+#endif
+
+
+#define get_node_number(addr) NASID_GET(addr)
+
+/*
+ * NOTE: on non-MP systems, only cpuid 0 exists
+ */
+
+extern short physical_node_map[]; /* indexed by nasid to get cnode */
+
+/*
+ * Macros for retrieving info about current cpu
+ */
+#define get_nasid() (nodepda->phys_cpuid[smp_processor_id()].nasid)
+#define get_subnode() (nodepda->phys_cpuid[smp_processor_id()].subnode)
+#define get_slice() (nodepda->phys_cpuid[smp_processor_id()].slice)
+#define get_cnode() (nodepda->phys_cpuid[smp_processor_id()].cnode)
+#define get_sapicid() ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+
+/*
+ * Macros for retrieving info about an arbitrary cpu
+ * cpuid - logical cpu id
+ */
+#define cpuid_to_nasid(cpuid) (nodepda->phys_cpuid[cpuid].nasid)
+#define cpuid_to_subnode(cpuid) (nodepda->phys_cpuid[cpuid].subnode)
+#define cpuid_to_slice(cpuid) (nodepda->phys_cpuid[cpuid].slice)
+#define cpuid_to_cnodeid(cpuid) (physical_node_map[cpuid_to_nasid(cpuid)])
+
+
+/*
+ * Dont use the following in performance critical code. They require scans
+ * of potentially large tables.
+ */
+extern int nasid_slice_to_cpuid(int, int);
+#define nasid_slice_to_cpu_physical_id(nasid, slice) \
+ cpu_physical_id(nasid_slice_to_cpuid(nasid, slice))
+
+/*
+ * cnodeid_to_nasid - convert a cnodeid to a NASID
+ * Macro relies on pg_data for a node being on the node itself.
+ * Just extract the NASID from the pointer.
+ *
+ */
+#define cnodeid_to_nasid(cnodeid) pda->cnodeid_to_nasid_table[cnodeid]
+
+/*
+ * nasid_to_cnodeid - convert a NASID to a cnodeid
+ */
+#define nasid_to_cnodeid(nasid) (physical_node_map[nasid])
+
+/*
+ * partition_coherence_id - get the coherence ID of the current partition
+ */
+extern u8 sn_coherency_id;
+#define partition_coherence_id() (sn_coherency_id)
+
+#endif /* _ASM_IA64_SN_SN_CPUID_H */
+
diff --git a/include/asm-ia64/sn/sn_fru.h b/include/asm-ia64/sn/sn_fru.h
new file mode 100644
index 0000000..8c21ac3
--- /dev/null
+++ b/include/asm-ia64/sn/sn_fru.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,1999-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_SN_FRU_H
+#define _ASM_IA64_SN_SN_FRU_H
+
+#define MAX_DIMMS 8 /* max # of dimm banks */
+#define MAX_PCIDEV 8 /* max # of pci devices on a pci bus */
+
+typedef unsigned char confidence_t;
+
+typedef struct kf_mem_s {
+ confidence_t km_confidence; /* confidence level that the memory is bad
+ * is this necessary ?
+ */
+ confidence_t km_dimm[MAX_DIMMS];
+ /* confidence level that dimm[i] is bad
+ *I think this is the right number
+ */
+
+} kf_mem_t;
+
+typedef struct kf_cpu_s {
+ confidence_t kc_confidence; /* confidence level that cpu is bad */
+ confidence_t kc_icache; /* confidence level that instr. cache is bad */
+ confidence_t kc_dcache; /* confidence level that data cache is bad */
+ confidence_t kc_scache; /* confidence level that sec. cache is bad */
+ confidence_t kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */
+} kf_cpu_t;
+
+
+typedef struct kf_pci_bus_s {
+ confidence_t kpb_belief; /* confidence level that the pci bus is bad */
+ confidence_t kpb_pcidev_belief[MAX_PCIDEV];
+ /* confidence level that the pci dev is bad */
+} kf_pci_bus_t;
+
+
+#endif /* _ASM_IA64_SN_SN_FRU_H */
+
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
new file mode 100644
index 0000000..88c31b5
--- /dev/null
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -0,0 +1,1015 @@
+#ifndef _ASM_IA64_SN_SN_SAL_H
+#define _ASM_IA64_SN_SN_SAL_H
+
+/*
+ * System Abstraction Layer definitions for IA64
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+#include <linux/config.h>
+#include <asm/sal.h>
+#include <asm/sn/sn_cpuid.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/geo.h>
+#include <asm/sn/nodepda.h>
+#include <asm/sn/shub_mmr.h>
+
+// SGI Specific Calls
+#define SN_SAL_POD_MODE 0x02000001
+#define SN_SAL_SYSTEM_RESET 0x02000002
+#define SN_SAL_PROBE 0x02000003
+#define SN_SAL_GET_MASTER_NASID 0x02000004
+#define SN_SAL_GET_KLCONFIG_ADDR 0x02000005
+#define SN_SAL_LOG_CE 0x02000006
+#define SN_SAL_REGISTER_CE 0x02000007
+#define SN_SAL_GET_PARTITION_ADDR 0x02000009
+#define SN_SAL_XP_ADDR_REGION 0x0200000f
+#define SN_SAL_NO_FAULT_ZONE_VIRTUAL 0x02000010
+#define SN_SAL_NO_FAULT_ZONE_PHYSICAL 0x02000011
+#define SN_SAL_PRINT_ERROR 0x02000012
+#define SN_SAL_SET_ERROR_HANDLING_FEATURES 0x0200001a // reentrant
+#define SN_SAL_GET_FIT_COMPT 0x0200001b // reentrant
+#define SN_SAL_GET_SN_INFO 0x0200001c
+#define SN_SAL_GET_SAPIC_INFO 0x0200001d
+#define SN_SAL_CONSOLE_PUTC 0x02000021
+#define SN_SAL_CONSOLE_GETC 0x02000022
+#define SN_SAL_CONSOLE_PUTS 0x02000023
+#define SN_SAL_CONSOLE_GETS 0x02000024
+#define SN_SAL_CONSOLE_GETS_TIMEOUT 0x02000025
+#define SN_SAL_CONSOLE_POLL 0x02000026
+#define SN_SAL_CONSOLE_INTR 0x02000027
+#define SN_SAL_CONSOLE_PUTB 0x02000028
+#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a
+#define SN_SAL_CONSOLE_READC 0x0200002b
+#define SN_SAL_SYSCTL_MODID_GET 0x02000031
+#define SN_SAL_SYSCTL_GET 0x02000032
+#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033
+#define SN_SAL_SYSCTL_IO_PORTSPEED_GET 0x02000035
+#define SN_SAL_SYSCTL_SLAB_GET 0x02000036
+#define SN_SAL_BUS_CONFIG 0x02000037
+#define SN_SAL_SYS_SERIAL_GET 0x02000038
+#define SN_SAL_PARTITION_SERIAL_GET 0x02000039
+#define SN_SAL_SYSCTL_PARTITION_GET 0x0200003a
+#define SN_SAL_SYSTEM_POWER_DOWN 0x0200003b
+#define SN_SAL_GET_MASTER_BASEIO_NASID 0x0200003c
+#define SN_SAL_COHERENCE 0x0200003d
+#define SN_SAL_MEMPROTECT 0x0200003e
+#define SN_SAL_SYSCTL_FRU_CAPTURE 0x0200003f
+
+#define SN_SAL_SYSCTL_IOBRICK_PCI_OP 0x02000042 // reentrant
+#define SN_SAL_IROUTER_OP 0x02000043
+#define SN_SAL_IOIF_INTERRUPT 0x0200004a
+#define SN_SAL_HWPERF_OP 0x02000050 // lock
+#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051
+
+#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053
+#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054
+#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055
+#define SN_SAL_IOIF_GET_PCIBUS_INFO 0x02000056
+#define SN_SAL_IOIF_GET_PCIDEV_INFO 0x02000057
+#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058
+
+#define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060
+
+
+/*
+ * Service-specific constants
+ */
+
+/* Console interrupt manipulation */
+ /* action codes */
+#define SAL_CONSOLE_INTR_OFF 0 /* turn the interrupt off */
+#define SAL_CONSOLE_INTR_ON 1 /* turn the interrupt on */
+#define SAL_CONSOLE_INTR_STATUS 2 /* retrieve the interrupt status */
+ /* interrupt specification & status return codes */
+#define SAL_CONSOLE_INTR_XMIT 1 /* output interrupt */
+#define SAL_CONSOLE_INTR_RECV 2 /* input interrupt */
+
+/* interrupt handling */
+#define SAL_INTR_ALLOC 1
+#define SAL_INTR_FREE 2
+
+/*
+ * IRouter (i.e. generalized system controller) operations
+ */
+#define SAL_IROUTER_OPEN 0 /* open a subchannel */
+#define SAL_IROUTER_CLOSE 1 /* close a subchannel */
+#define SAL_IROUTER_SEND 2 /* send part of an IRouter packet */
+#define SAL_IROUTER_RECV 3 /* receive part of an IRouter packet */
+#define SAL_IROUTER_INTR_STATUS 4 /* check the interrupt status for
+ * an open subchannel
+ */
+#define SAL_IROUTER_INTR_ON 5 /* enable an interrupt */
+#define SAL_IROUTER_INTR_OFF 6 /* disable an interrupt */
+#define SAL_IROUTER_INIT 7 /* initialize IRouter driver */
+
+/* IRouter interrupt mask bits */
+#define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT
+#define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV
+
+
+/*
+ * SAL Error Codes
+ */
+#define SALRET_MORE_PASSES 1
+#define SALRET_OK 0
+#define SALRET_NOT_IMPLEMENTED (-1)
+#define SALRET_INVALID_ARG (-2)
+#define SALRET_ERROR (-3)
+
+
+/**
+ * sn_sal_rev_major - get the major SGI SAL revision number
+ *
+ * The SGI PROM stores its version in sal_[ab]_rev_(major|minor).
+ * This routine simply extracts the major value from the
+ * @ia64_sal_systab structure constructed by ia64_sal_init().
+ */
+static inline int
+sn_sal_rev_major(void)
+{
+ struct ia64_sal_systab *systab = efi.sal_systab;
+
+ return (int)systab->sal_b_rev_major;
+}
+
+/**
+ * sn_sal_rev_minor - get the minor SGI SAL revision number
+ *
+ * The SGI PROM stores its version in sal_[ab]_rev_(major|minor).
+ * This routine simply extracts the minor value from the
+ * @ia64_sal_systab structure constructed by ia64_sal_init().
+ */
+static inline int
+sn_sal_rev_minor(void)
+{
+ struct ia64_sal_systab *systab = efi.sal_systab;
+
+ return (int)systab->sal_b_rev_minor;
+}
+
+/*
+ * Specify the minimum PROM revsion required for this kernel.
+ * Note that they're stored in hex format...
+ */
+#define SN_SAL_MIN_MAJOR 0x4 /* SN2 kernels need at least PROM 4.0 */
+#define SN_SAL_MIN_MINOR 0x0
+
+/*
+ * Returns the master console nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_console_nasid(void)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+ if (ret_stuff.status < 0)
+ return ret_stuff.status;
+
+ /* Master console nasid is in 'v0' */
+ return ret_stuff.v0;
+}
+
+/*
+ * Returns the master baseio nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_master_baseio_nasid(void)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+ if (ret_stuff.status < 0)
+ return ret_stuff.status;
+
+ /* Master baseio nasid is in 'v0' */
+ return ret_stuff.v0;
+}
+
+static inline char *
+ia64_sn_get_klconfig_addr(nasid_t nasid)
+{
+ struct ia64_sal_retval ret_stuff;
+ int cnodeid;
+
+ cnodeid = nasid_to_cnodeid(nasid);
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
+
+ /*
+ * We should panic if a valid cnode nasid does not produce
+ * a klconfig address.
+ */
+ if (ret_stuff.status != 0) {
+ panic("ia64_sn_get_klconfig_addr: Returned error %lx\n", ret_stuff.status);
+ }
+ return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
+}
+
+/*
+ * Returns the next console character.
+ */
+static inline u64
+ia64_sn_console_getc(int *ch)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0);
+
+ /* character is in 'v0' */
+ *ch = (int)ret_stuff.v0;
+
+ return ret_stuff.status;
+}
+
+/*
+ * Read a character from the SAL console device, after a previous interrupt
+ * or poll operation has given us to know that a character is available
+ * to be read.
+ */
+static inline u64
+ia64_sn_console_readc(void)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0);
+
+ /* character is in 'v0' */
+ return ret_stuff.v0;
+}
+
+/*
+ * Sends the given character to the console.
+ */
+static inline u64
+ia64_sn_console_putc(char ch)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (uint64_t)ch, 0, 0, 0, 0, 0, 0);
+
+ return ret_stuff.status;
+}
+
+/*
+ * Sends the given buffer to the console.
+ */
+static inline u64
+ia64_sn_console_putb(const char *buf, int len)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (uint64_t)buf, (uint64_t)len, 0, 0, 0, 0, 0);
+
+ if ( ret_stuff.status == 0 ) {
+ return ret_stuff.v0;
+ }
+ return (u64)0;
+}
+
+/*
+ * Print a platform error record
+ */
+static inline u64
+ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (uint64_t)hook, (uint64_t)rec, 0, 0, 0, 0, 0);
+
+ return ret_stuff.status;
+}
+
+/*
+ * Check for Platform errors
+ */
+static inline u64
+ia64_sn_plat_cpei_handler(void)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0);
+
+ return ret_stuff.status;
+}
+
+/*
+ * Checks for console input.
+ */
+static inline u64
+ia64_sn_console_check(int *result)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0);
+
+ /* result is in 'v0' */
+ *result = (int)ret_stuff.v0;
+
+ return ret_stuff.status;
+}
+
+/*
+ * Checks console interrupt status
+ */
+static inline u64
+ia64_sn_console_intr_status(void)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR,
+ 0, SAL_CONSOLE_INTR_STATUS,
+ 0, 0, 0, 0, 0);
+
+ if (ret_stuff.status == 0) {
+ return ret_stuff.v0;
+ }
+
+ return 0;
+}
+
+/*
+ * Enable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_enable(uint64_t intr)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR,
+ intr, SAL_CONSOLE_INTR_ON,
+ 0, 0, 0, 0, 0);
+}
+
+/*
+ * Disable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_disable(uint64_t intr)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR,
+ intr, SAL_CONSOLE_INTR_OFF,
+ 0, 0, 0, 0, 0);
+}
+
+/*
+ * Sends a character buffer to the console asynchronously.
+ */
+static inline u64
+ia64_sn_console_xmit_chars(char *buf, int len)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
+ (uint64_t)buf, (uint64_t)len,
+ 0, 0, 0, 0, 0);
+
+ if (ret_stuff.status == 0) {
+ return ret_stuff.v0;
+ }
+
+ return 0;
+}
+
+/*
+ * Returns the iobrick module Id
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0);
+
+ /* result is in 'v0' */
+ *result = (int)ret_stuff.v0;
+
+ return ret_stuff.status;
+}
+
+/**
+ * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function
+ *
+ * SN_SAL_POD_MODE actually takes an argument, but it's always
+ * 0 when we call it from the kernel, so we don't have to expose
+ * it to the caller.
+ */
+static inline u64
+ia64_sn_pod_mode(void)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
+ if (isrv.status)
+ return 0;
+ return isrv.v0;
+}
+
+/**
+ * ia64_sn_probe_mem - read from memory safely
+ * @addr: address to probe
+ * @size: number bytes to read (1,2,4,8)
+ * @data_ptr: address to store value read by probe (-1 returned if probe fails)
+ *
+ * Call into the SAL to do a memory read. If the read generates a machine
+ * check, this routine will recover gracefully and return -1 to the caller.
+ * @addr is usually a kernel virtual address in uncached space (i.e. the
+ * address starts with 0xc), but if called in physical mode, @addr should
+ * be a physical address.
+ *
+ * Return values:
+ * 0 - probe successful
+ * 1 - probe failed (generated MCA)
+ * 2 - Bad arg
+ * <0 - PAL error
+ */
+static inline u64
+ia64_sn_probe_mem(long addr, long size, void *data_ptr)
+{
+ struct ia64_sal_retval isrv;
+
+ SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0);
+
+ if (data_ptr) {
+ switch (size) {
+ case 1:
+ *((u8*)data_ptr) = (u8)isrv.v0;
+ break;
+ case 2:
+ *((u16*)data_ptr) = (u16)isrv.v0;
+ break;
+ case 4:
+ *((u32*)data_ptr) = (u32)isrv.v0;
+ break;
+ case 8:
+ *((u64*)data_ptr) = (u64)isrv.v0;
+ break;
+ default:
+ isrv.status = 2;
+ }
+ }
+ return isrv.status;
+}
+
+/*
+ * Retrieve the system serial number as an ASCII string.
+ */
+static inline u64
+ia64_sn_sys_serial_get(char *buf)
+{
+ struct ia64_sal_retval ret_stuff;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0);
+ return ret_stuff.status;
+}
+
+extern char sn_system_serial_number_string[];
+extern u64 sn_partition_serial_number;
+
+static inline char *
+sn_system_serial_number(void) {
+ if (sn_system_serial_number_string[0]) {
+ return(sn_system_serial_number_string);
+ } else {
+ ia64_sn_sys_serial_get(sn_system_serial_number_string);
+ return(sn_system_serial_number_string);
+ }
+}
+
+
+/*
+ * Returns a unique id number for this system and partition (suitable for
+ * use with license managers), based in part on the system serial number.
+ */
+static inline u64
+ia64_sn_partition_serial_get(void)
+{
+ struct ia64_sal_retval ret_stuff;
+ SAL_CALL(ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0, 0, 0, 0, 0, 0, 0);
+ if (ret_stuff.status != 0)
+ return 0;
+ return ret_stuff.v0;
+}
+
+static inline u64
+sn_partition_serial_number_val(void) {
+ if (sn_partition_serial_number) {
+ return(sn_partition_serial_number);
+ } else {
+ return(sn_partition_serial_number = ia64_sn_partition_serial_get());
+ }
+}
+
+/*
+ * Returns the partition id of the nasid passed in as an argument,
+ * or INVALID_PARTID if the partition id cannot be retrieved.
+ */
+static inline partid_t
+ia64_sn_sysctl_partition_get(nasid_t nasid)
+{
+ struct ia64_sal_retval ret_stuff;
+ SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid,
+ 0, 0, 0, 0, 0, 0);
+ if (ret_stuff.status != 0)
+ return INVALID_PARTID;
+ return ((partid_t)ret_stuff.v0);
+}
+
+/*
+ * Returns the partition id of the current processor.
+ */
+
+extern partid_t sn_partid;
+
+static inline partid_t
+sn_local_partid(void) {
+ if (sn_partid < 0) {
+ return (sn_partid = ia64_sn_sysctl_partition_get(cpuid_to_nasid(smp_processor_id())));
+ } else {
+ return sn_partid;
+ }
+}
+
+/*
+ * Register or unregister a physical address range being referenced across
+ * a partition boundary for which certain SAL errors should be scanned for,
+ * cleaned up and ignored. This is of value for kernel partitioning code only.
+ * Values for the operation argument:
+ * 1 = register this address range with SAL
+ * 0 = unregister this address range with SAL
+ *
+ * SAL maintains a reference count on an address range in case it is registered
+ * multiple times.
+ *
+ * On success, returns the reference count of the address range after the SAL
+ * call has performed the current registration/unregistration. Returns a
+ * negative value if an error occurred.
+ */
+static inline int
+sn_register_xp_addr_region(u64 paddr, u64 len, int operation)
+{
+ struct ia64_sal_retval ret_stuff;
+ SAL_CALL(ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len, (u64)operation,
+ 0, 0, 0, 0);
+ return ret_stuff.status;
+}
+
+/*
+ * Register or unregister an instruction range for which SAL errors should
+ * be ignored. If an error occurs while in the registered range, SAL jumps
+ * to return_addr after ignoring the error. Values for the operation argument:
+ * 1 = register this instruction range with SAL
+ * 0 = unregister this instruction range with SAL
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr,
+ int virtual, int operation)
+{
+ struct ia64_sal_retval ret_stuff;
+ u64 call;
+ if (virtual) {
+ call = SN_SAL_NO_FAULT_ZONE_VIRTUAL;
+ } else {
+ call = SN_SAL_NO_FAULT_ZONE_PHYSICAL;
+ }
+ SAL_CALL(ret_stuff, call, start_addr, end_addr, return_addr, (u64)1,
+ 0, 0, 0);
+ return ret_stuff.status;
+}
+
+/*
+ * Change or query the coherence domain for this partition. Each cpu-based
+ * nasid is represented by a bit in an array of 64-bit words:
+ * 0 = not in this partition's coherency domain
+ * 1 = in this partition's coherency domain
+ *
+ * It is not possible for the local system's nasids to be removed from
+ * the coherency domain. Purpose of the domain arguments:
+ * new_domain = set the coherence domain to the given nasids
+ * old_domain = return the current coherence domain
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_change_coherence(u64 *new_domain, u64 *old_domain)
+{
+ struct ia64_sal_retval ret_stuff;
+ SAL_CALL(ret_stuff, SN_SAL_COHERENCE, new_domain, old_domain, 0, 0,
+ 0, 0, 0);
+ return ret_stuff.status;
+}
+
+/*
+ * Change memory access protections for a physical address range.
+ * nasid_array is not used on Altix, but may be in future architectures.
+ * Available memory protection access classes are defined after the function.
+ */
+static inline int
+sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
+{
+ struct ia64_sal_retval ret_stuff;
+ int cnodeid;
+ unsigned long irq_flags;
+
+ cnodeid = nasid_to_cnodeid(get_node_number(paddr));
+ // spin_lock(&NODEPDA(cnodeid)->bist_lock);
+ local_irq_save(irq_flags);
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_MEMPROTECT, paddr, len, nasid_array,
+ perms, 0, 0, 0);
+ local_irq_restore(irq_flags);
+ // spin_unlock(&NODEPDA(cnodeid)->bist_lock);
+ return ret_stuff.status;
+}
+#define SN_MEMPROT_ACCESS_CLASS_0 0x14a080
+#define SN_MEMPROT_ACCESS_CLASS_1 0x2520c2
+#define SN_MEMPROT_ACCESS_CLASS_2 0x14a1ca
+#define SN_MEMPROT_ACCESS_CLASS_3 0x14a290
+#define SN_MEMPROT_ACCESS_CLASS_6 0x084080
+#define SN_MEMPROT_ACCESS_CLASS_7 0x021080
+
+/*
+ * Turns off system power.
+ */
+static inline void
+ia64_sn_power_down(void)
+{
+ struct ia64_sal_retval ret_stuff;
+ SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
+ while(1);
+ /* never returns */
+}
+
+/**
+ * ia64_sn_fru_capture - tell the system controller to capture hw state
+ *
+ * This routine will call the SAL which will tell the system controller(s)
+ * to capture hw mmr information from each SHub in the system.
+ */
+static inline u64
+ia64_sn_fru_capture(void)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0);
+ if (isrv.status)
+ return 0;
+ return isrv.v0;
+}
+
+/*
+ * Performs an operation on a PCI bus or slot -- power up, power down
+ * or reset.
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type,
+ u64 bus, char slot,
+ u64 action)
+{
+ struct ia64_sal_retval rv = {0, 0, 0, 0};
+
+ SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action,
+ bus, (u64) slot, 0, 0);
+ if (rv.status)
+ return rv.v0;
+ return 0;
+}
+
+
+/*
+ * Open a subchannel for sending arbitrary data to the system
+ * controller network via the system controller device associated with
+ * 'nasid'. Return the subchannel number or a negative error code.
+ */
+static inline int
+ia64_sn_irtr_open(nasid_t nasid)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
+ 0, 0, 0, 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Close system controller subchannel 'subch' previously opened on 'nasid'.
+ */
+static inline int
+ia64_sn_irtr_close(nasid_t nasid, int subch)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
+ (u64) nasid, (u64) subch, 0, 0, 0, 0);
+ return (int) rv.status;
+}
+
+/*
+ * Read data from system controller associated with 'nasid' on
+ * subchannel 'subch'. The buffer to be filled is pointed to by
+ * 'buf', and its capacity is in the integer pointed to by 'len'. The
+ * referent of 'len' is set to the number of bytes read by the SAL
+ * call. The return value is either SALRET_OK (for bytes read) or
+ * SALRET_ERROR (for error or "no data available").
+ */
+static inline int
+ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
+ (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+ 0, 0);
+ return (int) rv.status;
+}
+
+/*
+ * Write data to the system controller network via the system
+ * controller associated with 'nasid' on suchannel 'subch'. The
+ * buffer to be written out is pointed to by 'buf', and 'len' is the
+ * number of bytes to be written. The return value is either the
+ * number of bytes written (which could be zero) or a negative error
+ * code.
+ */
+static inline int
+ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
+ (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+ 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Check whether any interrupts are pending for the system controller
+ * associated with 'nasid' and its subchannel 'subch'. The return
+ * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
+ * SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr(nasid_t nasid, int subch)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
+ (u64) nasid, (u64) subch, 0, 0, 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Enable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
+ (u64) nasid, (u64) subch, intr, 0, 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Disable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
+ (u64) nasid, (u64) subch, intr, 0, 0, 0);
+ return (int) rv.v0;
+}
+
+/**
+ * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
+ * @nasid: NASID of node to read
+ * @index: FIT entry index to be retrieved (0..n)
+ * @fitentry: 16 byte buffer where FIT entry will be stored.
+ * @banbuf: optional buffer for retrieving banner
+ * @banlen: length of banner buffer
+ *
+ * Access to the physical PROM chips needs to be serialized since reads and
+ * writes can't occur at the same time, so we need to call into the SAL when
+ * we want to look at the FIT entries on the chips.
+ *
+ * Returns:
+ * %SALRET_OK if ok
+ * %SALRET_INVALID_ARG if index too big
+ * %SALRET_NOT_IMPLEMENTED if running on older PROM
+ * ??? if nasid invalid OR banner buffer not large enough
+ */
+static inline int
+ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
+ u64 banlen)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
+ banbuf, banlen, 0, 0);
+ return (int) rv.status;
+}
+
+/*
+ * Initialize the SAL components of the system controller
+ * communication driver; specifically pass in a sizable buffer that
+ * can be used for allocation of subchannel queues as new subchannels
+ * are opened. "buf" points to the buffer, and "len" specifies its
+ * length.
+ */
+static inline int
+ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
+ (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
+ return (int) rv.status;
+}
+
+/*
+ * Returns the nasid, subnode & slice corresponding to a SAPIC ID
+ *
+ * In:
+ * arg0 - SN_SAL_GET_SAPIC_INFO
+ * arg1 - sapicid (lid >> 16)
+ * Out:
+ * v0 - nasid
+ * v1 - subnode
+ * v2 - slice
+ */
+static inline u64
+ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+ if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+ if (nasid) *nasid = sapicid & 0xfff;
+ if (subnode) *subnode = (sapicid >> 13) & 1;
+ if (slice) *slice = (sapicid >> 12) & 3;
+ return 0;
+ }
+/***** END HACK *******/
+
+ if (ret_stuff.status < 0)
+ return ret_stuff.status;
+
+ if (nasid) *nasid = (int) ret_stuff.v0;
+ if (subnode) *subnode = (int) ret_stuff.v1;
+ if (slice) *slice = (int) ret_stuff.v2;
+ return 0;
+}
+
+/*
+ * Returns information about the HUB/SHUB.
+ * In:
+ * arg0 - SN_SAL_GET_SN_INFO
+ * arg1 - 0 (other values reserved for future use)
+ * Out:
+ * v0
+ * [7:0] - shub type (0=shub1, 1=shub2)
+ * [15:8] - Log2 max number of nodes in entire system (includes
+ * C-bricks, I-bricks, etc)
+ * [23:16] - Log2 of nodes per sharing domain
+ * [31:24] - partition ID
+ * [39:32] - coherency_id
+ * [47:40] - regionsize
+ * v1
+ * [15:0] - nasid mask (ex., 0x7ff for 11 bit nasid)
+ * [23:15] - bit position of low nasid bit
+ */
+static inline u64
+ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift,
+ u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+ if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+ int nasid = get_sapicid() & 0xfff;;
+#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL
+#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48
+ if (shubtype) *shubtype = 0;
+ if (nasid_bitmask) *nasid_bitmask = 0x7ff;
+ if (nasid_shift) *nasid_shift = 38;
+ if (systemsize) *systemsize = 11;
+ if (sharing_domain_size) *sharing_domain_size = 9;
+ if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
+ if (coher) *coher = nasid >> 9;
+ if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
+ SH_SHUB_ID_NODES_PER_BIT_SHFT;
+ return 0;
+ }
+/***** END HACK *******/
+
+ if (ret_stuff.status < 0)
+ return ret_stuff.status;
+
+ if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
+ if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
+ if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
+ if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
+ if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
+ if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
+ if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
+ if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
+ return 0;
+}
+
+/*
+ * This is the access point to the Altix PROM hardware performance
+ * and status monitoring interface. For info on using this, see
+ * include/asm-ia64/sn/sn2/sn_hwperf.h
+ */
+static inline int
+ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
+ u64 a3, u64 a4, int *v0)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
+ opcode, a0, a1, a2, a3, a4);
+ if (v0)
+ *v0 = (int) rv.v0;
+ return (int) rv.status;
+}
+
+#endif /* _ASM_IA64_SN_SN_SAL_H */
diff --git a/include/asm-ia64/sn/sndrv.h b/include/asm-ia64/sn/sndrv.h
new file mode 100644
index 0000000..aa00d42
--- /dev/null
+++ b/include/asm-ia64/sn/sndrv.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2002-2004 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SNDRV_H
+#define _ASM_IA64_SN_SNDRV_H
+
+/* ioctl commands */
+#define SNDRV_GET_ROUTERINFO 1
+#define SNDRV_GET_INFOSIZE 2
+#define SNDRV_GET_HUBINFO 3
+#define SNDRV_GET_FLASHLOGSIZE 4
+#define SNDRV_SET_FLASHSYNC 5
+#define SNDRV_GET_FLASHLOGDATA 6
+#define SNDRV_GET_FLASHLOGALL 7
+
+#define SNDRV_SET_HISTOGRAM_TYPE 14
+
+#define SNDRV_ELSC_COMMAND 19
+#define SNDRV_CLEAR_LOG 20
+#define SNDRV_INIT_LOG 21
+#define SNDRV_GET_PIMM_PSC 22
+#define SNDRV_SET_PARTITION 23
+#define SNDRV_GET_PARTITION 24
+
+/* see synergy_perf_ioctl() */
+#define SNDRV_GET_SYNERGY_VERSION 30
+#define SNDRV_GET_SYNERGY_STATUS 31
+#define SNDRV_GET_SYNERGYINFO 32
+#define SNDRV_SYNERGY_APPEND 33
+#define SNDRV_SYNERGY_ENABLE 34
+#define SNDRV_SYNERGY_FREQ 35
+
+/* Devices */
+#define SNDRV_UKNOWN_DEVICE -1
+#define SNDRV_ROUTER_DEVICE 1
+#define SNDRV_HUB_DEVICE 2
+#define SNDRV_ELSC_NVRAM_DEVICE 3
+#define SNDRV_ELSC_CONTROLLER_DEVICE 4
+#define SNDRV_SYSCTL_SUBCH 5
+#define SNDRV_SYNERGY_DEVICE 6
+
+#endif /* _ASM_IA64_SN_SNDRV_H */
diff --git a/include/asm-ia64/sn/types.h b/include/asm-ia64/sn/types.h
new file mode 100644
index 0000000..586ed47
--- /dev/null
+++ b/include/asm-ia64/sn/types.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_TYPES_H
+#define _ASM_IA64_SN_TYPES_H
+
+#include <linux/types.h>
+
+typedef unsigned long cpuid_t;
+typedef signed short nasid_t; /* node id in numa-as-id space */
+typedef signed char partid_t; /* partition ID type */
+typedef unsigned int moduleid_t; /* user-visible module number type */
+typedef unsigned int cmoduleid_t; /* kernel compact module id type */
+typedef signed char slabid_t;
+typedef u64 nic_t;
+typedef unsigned long iopaddr_t;
+typedef unsigned long paddr_t;
+typedef short cnodeid_t;
+
+#endif /* _ASM_IA64_SN_TYPES_H */
diff --git a/include/asm-ia64/socket.h b/include/asm-ia64/socket.h
new file mode 100644
index 0000000..21a9f10
--- /dev/null
+++ b/include/asm-ia64/socket.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_IA64_SOCKET_H
+#define _ASM_IA64_SOCKET_H
+
+/*
+ * Socket related defines.
+ *
+ * Based on <asm-i386/socket.h>.
+ *
+ * Modified 1998-2000
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+
+#endif /* _ASM_IA64_SOCKET_H */
diff --git a/include/asm-ia64/sockios.h b/include/asm-ia64/sockios.h
new file mode 100644
index 0000000..cf94857
--- /dev/null
+++ b/include/asm-ia64/sockios.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_IA64_SOCKIOS_H
+#define _ASM_IA64_SOCKIOS_H
+
+/*
+ * Socket-level I/O control calls.
+ *
+ * Based on <asm-i386/sockios.h>.
+ *
+ * Modified 1998, 1999
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp */
+
+#endif /* _ASM_IA64_SOCKIOS_H */
diff --git a/include/asm-ia64/spinlock.h b/include/asm-ia64/spinlock.h
new file mode 100644
index 0000000..909936f
--- /dev/null
+++ b/include/asm-ia64/spinlock.h
@@ -0,0 +1,208 @@
+#ifndef _ASM_IA64_SPINLOCK_H
+#define _ASM_IA64_SPINLOCK_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ *
+ * This file is used for SMP configurations only.
+ */
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/intrinsics.h>
+#include <asm/system.h>
+
+typedef struct {
+ volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+ unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 }
+#define spin_lock_init(x) ((x)->lock = 0)
+
+#ifdef ASM_SUPPORTED
+/*
+ * Try to get the lock. If we fail to get the lock, make a non-standard call to
+ * ia64_spinlock_contention(). We do not use a normal call because that would force all
+ * callers of spin_lock() to be non-leaf routines. Instead, ia64_spinlock_contention() is
+ * carefully coded to touch only those registers that spin_lock() marks "clobbered".
+ */
+
+#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
+
+static inline void
+_raw_spin_lock_flags (spinlock_t *lock, unsigned long flags)
+{
+ register volatile unsigned int *ptr asm ("r31") = &lock->lock;
+
+#if __GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
+# ifdef CONFIG_ITANIUM
+ /* don't use brl on Itanium... */
+ asm volatile ("{\n\t"
+ " mov ar.ccv = r0\n\t"
+ " mov r28 = ip\n\t"
+ " mov r30 = 1;;\n\t"
+ "}\n\t"
+ "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
+ "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
+ "cmp4.ne p14, p0 = r30, r0\n\t"
+ "mov b6 = r29;;\n\t"
+ "mov r27=%2\n\t"
+ "(p14) br.cond.spnt.many b6"
+ : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+ asm volatile ("{\n\t"
+ " mov ar.ccv = r0\n\t"
+ " mov r28 = ip\n\t"
+ " mov r30 = 1;;\n\t"
+ "}\n\t"
+ "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
+ "cmp4.ne p14, p0 = r30, r0\n\t"
+ "mov r27=%2\n\t"
+ "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
+ : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#else
+# ifdef CONFIG_ITANIUM
+ /* don't use brl on Itanium... */
+ /* mis-declare, so we get the entry-point, not it's function descriptor: */
+ asm volatile ("mov r30 = 1\n\t"
+ "mov r27=%2\n\t"
+ "mov ar.ccv = r0;;\n\t"
+ "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
+ "movl r29 = ia64_spinlock_contention;;\n\t"
+ "cmp4.ne p14, p0 = r30, r0\n\t"
+ "mov b6 = r29;;\n\t"
+ "(p14) br.call.spnt.many b6 = b6"
+ : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+ asm volatile ("mov r30 = 1\n\t"
+ "mov r27=%2\n\t"
+ "mov ar.ccv = r0;;\n\t"
+ "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
+ "cmp4.ne p14, p0 = r30, r0\n\t"
+ "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
+ : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#endif
+}
+#define _raw_spin_lock(lock) _raw_spin_lock_flags(lock, 0)
+#else /* !ASM_SUPPORTED */
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+# define _raw_spin_lock(x) \
+do { \
+ __u32 *ia64_spinlock_ptr = (__u32 *) (x); \
+ __u64 ia64_spinlock_val; \
+ ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0); \
+ if (unlikely(ia64_spinlock_val)) { \
+ do { \
+ while (*ia64_spinlock_ptr) \
+ ia64_barrier(); \
+ ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0); \
+ } while (ia64_spinlock_val); \
+ } \
+} while (0)
+#endif /* !ASM_SUPPORTED */
+
+#define spin_is_locked(x) ((x)->lock != 0)
+#define _raw_spin_unlock(x) do { barrier(); ((spinlock_t *) x)->lock = 0; } while (0)
+#define _raw_spin_trylock(x) (cmpxchg_acq(&(x)->lock, 0, 1) == 0)
+#define spin_unlock_wait(x) do { barrier(); } while ((x)->lock)
+
+typedef struct {
+ volatile unsigned int read_counter : 31;
+ volatile unsigned int write_lock : 1;
+#ifdef CONFIG_PREEMPT
+ unsigned int break_lock;
+#endif
+} rwlock_t;
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0, 0 }
+
+#define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+#define read_can_lock(rw) (*(volatile int *)(rw) >= 0)
+#define write_can_lock(rw) (*(volatile int *)(rw) == 0)
+
+#define _raw_read_lock(rw) \
+do { \
+ rwlock_t *__read_lock_ptr = (rw); \
+ \
+ while (unlikely(ia64_fetchadd(1, (int *) __read_lock_ptr, acq) < 0)) { \
+ ia64_fetchadd(-1, (int *) __read_lock_ptr, rel); \
+ while (*(volatile int *)__read_lock_ptr < 0) \
+ cpu_relax(); \
+ } \
+} while (0)
+
+#define _raw_read_unlock(rw) \
+do { \
+ rwlock_t *__read_lock_ptr = (rw); \
+ ia64_fetchadd(-1, (int *) __read_lock_ptr, rel); \
+} while (0)
+
+#ifdef ASM_SUPPORTED
+#define _raw_write_lock(rw) \
+do { \
+ __asm__ __volatile__ ( \
+ "mov ar.ccv = r0\n" \
+ "dep r29 = -1, r0, 31, 1;;\n" \
+ "1:\n" \
+ "ld4 r2 = [%0];;\n" \
+ "cmp4.eq p0,p7 = r0,r2\n" \
+ "(p7) br.cond.spnt.few 1b \n" \
+ "cmpxchg4.acq r2 = [%0], r29, ar.ccv;;\n" \
+ "cmp4.eq p0,p7 = r0, r2\n" \
+ "(p7) br.cond.spnt.few 1b;;\n" \
+ :: "r"(rw) : "ar.ccv", "p7", "r2", "r29", "memory"); \
+} while(0)
+
+#define _raw_write_trylock(rw) \
+({ \
+ register long result; \
+ \
+ __asm__ __volatile__ ( \
+ "mov ar.ccv = r0\n" \
+ "dep r29 = -1, r0, 31, 1;;\n" \
+ "cmpxchg4.acq %0 = [%1], r29, ar.ccv\n" \
+ : "=r"(result) : "r"(rw) : "ar.ccv", "r29", "memory"); \
+ (result == 0); \
+})
+
+#else /* !ASM_SUPPORTED */
+
+#define _raw_write_lock(l) \
+({ \
+ __u64 ia64_val, ia64_set_val = ia64_dep_mi(-1, 0, 31, 1); \
+ __u32 *ia64_write_lock_ptr = (__u32 *) (l); \
+ do { \
+ while (*ia64_write_lock_ptr) \
+ ia64_barrier(); \
+ ia64_val = ia64_cmpxchg4_acq(ia64_write_lock_ptr, ia64_set_val, 0); \
+ } while (ia64_val); \
+})
+
+#define _raw_write_trylock(rw) \
+({ \
+ __u64 ia64_val; \
+ __u64 ia64_set_val = ia64_dep_mi(-1, 0, 31,1); \
+ ia64_val = ia64_cmpxchg4_acq((__u32 *)(rw), ia64_set_val, 0); \
+ (ia64_val == 0); \
+})
+
+#endif /* !ASM_SUPPORTED */
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+#define _raw_write_unlock(x) \
+({ \
+ smp_mb__before_clear_bit(); /* need barrier before releasing lock... */ \
+ clear_bit(31, (x)); \
+})
+
+#endif /* _ASM_IA64_SPINLOCK_H */
diff --git a/include/asm-ia64/stat.h b/include/asm-ia64/stat.h
new file mode 100644
index 0000000..367bb90
--- /dev/null
+++ b/include/asm-ia64/stat.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_STAT_H
+#define _ASM_IA64_STAT_H
+
+/*
+ * Modified 1998, 1999
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+struct stat {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned long st_nlink;
+ unsigned int st_mode;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned int __pad0;
+ unsigned long st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long st_blksize;
+ long st_blocks;
+ unsigned long __unused[3];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct ia64_oldstat {
+ unsigned int st_dev;
+ unsigned int st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned int st_rdev;
+ unsigned int __pad1;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+ unsigned int st_blksize;
+ int st_blocks;
+ unsigned int __unused1;
+ unsigned int __unused2;
+};
+
+#endif /* _ASM_IA64_STAT_H */
diff --git a/include/asm-ia64/statfs.h b/include/asm-ia64/statfs.h
new file mode 100644
index 0000000..8110979
--- /dev/null
+++ b/include/asm-ia64/statfs.h
@@ -0,0 +1,62 @@
+#ifndef _ASM_IA64_STATFS_H
+#define _ASM_IA64_STATFS_H
+
+/*
+ * Based on <asm-i386/statfs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#ifndef __KERNEL_STRICT_NAMES
+# include <linux/types.h>
+typedef __kernel_fsid_t fsid_t;
+#endif
+
+/*
+ * This is ugly --- we're already 64-bit, so just duplicate the definitions
+ */
+struct statfs {
+ long f_type;
+ long f_bsize;
+ long f_blocks;
+ long f_bfree;
+ long f_bavail;
+ long f_files;
+ long f_ffree;
+ __kernel_fsid_t f_fsid;
+ long f_namelen;
+ long f_frsize;
+ long f_spare[5];
+};
+
+
+struct statfs64 {
+ long f_type;
+ long f_bsize;
+ long f_blocks;
+ long f_bfree;
+ long f_bavail;
+ long f_files;
+ long f_ffree;
+ __kernel_fsid_t f_fsid;
+ long f_namelen;
+ long f_frsize;
+ long f_spare[5];
+};
+
+struct compat_statfs64 {
+ __u32 f_type;
+ __u32 f_bsize;
+ __u64 f_blocks;
+ __u64 f_bfree;
+ __u64 f_bavail;
+ __u64 f_files;
+ __u64 f_ffree;
+ __kernel_fsid_t f_fsid;
+ __u32 f_namelen;
+ __u32 f_frsize;
+ __u32 f_spare[5];
+} __attribute__((packed));
+
+#endif /* _ASM_IA64_STATFS_H */
diff --git a/include/asm-ia64/string.h b/include/asm-ia64/string.h
new file mode 100644
index 0000000..43502d3
--- /dev/null
+++ b/include/asm-ia64/string.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_STRING_H
+#define _ASM_IA64_STRING_H
+
+/*
+ * Here is where we want to put optimized versions of the string
+ * routines.
+ *
+ * Copyright (C) 1998-2000, 2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h> /* remove this once we remove the A-step workaround... */
+
+#define __HAVE_ARCH_STRLEN 1 /* see arch/ia64/lib/strlen.S */
+#define __HAVE_ARCH_MEMSET 1 /* see arch/ia64/lib/memset.S */
+#define __HAVE_ARCH_MEMCPY 1 /* see arch/ia64/lib/memcpy.S */
+
+extern __kernel_size_t strlen (const char *);
+extern void *memcpy (void *, const void *, __kernel_size_t);
+extern void *memset (void *, int, __kernel_size_t);
+
+#endif /* _ASM_IA64_STRING_H */
diff --git a/include/asm-ia64/suspend.h b/include/asm-ia64/suspend.h
new file mode 100644
index 0000000..b05bbb6
--- /dev/null
+++ b/include/asm-ia64/suspend.h
@@ -0,0 +1 @@
+/* dummy (must be non-empty to prevent prejudicial removal...) */
diff --git a/include/asm-ia64/system.h b/include/asm-ia64/system.h
new file mode 100644
index 0000000..6f516e7
--- /dev/null
+++ b/include/asm-ia64/system.h
@@ -0,0 +1,295 @@
+#ifndef _ASM_IA64_SYSTEM_H
+#define _ASM_IA64_SYSTEM_H
+
+/*
+ * System defines. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code. This is based
+ * on information published in the Processor Abstraction Layer
+ * and the System Abstraction Layer manual.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+#include <linux/config.h>
+
+#include <asm/kregs.h>
+#include <asm/page.h>
+#include <asm/pal.h>
+#include <asm/percpu.h>
+
+#define GATE_ADDR __IA64_UL_CONST(0xa000000000000000)
+/*
+ * 0xa000000000000000+2*PERCPU_PAGE_SIZE
+ * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
+ */
+#define KERNEL_START __IA64_UL_CONST(0xa000000100000000)
+#define PERCPU_ADDR (-PERCPU_PAGE_SIZE)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct pci_vector_struct {
+ __u16 segment; /* PCI Segment number */
+ __u16 bus; /* PCI Bus number */
+ __u32 pci_id; /* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
+ __u8 pin; /* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
+ __u32 irq; /* IRQ assigned */
+};
+
+extern struct ia64_boot_param {
+ __u64 command_line; /* physical address of command line arguments */
+ __u64 efi_systab; /* physical address of EFI system table */
+ __u64 efi_memmap; /* physical address of EFI memory map */
+ __u64 efi_memmap_size; /* size of EFI memory map */
+ __u64 efi_memdesc_size; /* size of an EFI memory map descriptor */
+ __u32 efi_memdesc_version; /* memory descriptor version */
+ struct {
+ __u16 num_cols; /* number of columns on console output device */
+ __u16 num_rows; /* number of rows on console output device */
+ __u16 orig_x; /* cursor's x position */
+ __u16 orig_y; /* cursor's y position */
+ } console_info;
+ __u64 fpswa; /* physical address of the fpswa interface */
+ __u64 initrd_start;
+ __u64 initrd_size;
+} *ia64_boot_param;
+
+/*
+ * Macros to force memory ordering. In these descriptions, "previous"
+ * and "subsequent" refer to program order; "visible" means that all
+ * architecturally visible effects of a memory access have occurred
+ * (at a minimum, this means the memory has been read or written).
+ *
+ * wmb(): Guarantees that all preceding stores to memory-
+ * like regions are visible before any subsequent
+ * stores and that all following stores will be
+ * visible only after all previous stores.
+ * rmb(): Like wmb(), but for reads.
+ * mb(): wmb()/rmb() combo, i.e., all previous memory
+ * accesses are visible before all subsequent
+ * accesses and vice versa. This is also known as
+ * a "fence."
+ *
+ * Note: "mb()" and its variants cannot be used as a fence to order
+ * accesses to memory mapped I/O registers. For that, mf.a needs to
+ * be used. However, we don't want to always use mf.a because (a)
+ * it's (presumably) much slower than mf and (b) mf.a is supported for
+ * sequential memory pages only.
+ */
+#define mb() ia64_mf()
+#define rmb() mb()
+#define wmb() mb()
+#define read_barrier_depends() do { } while(0)
+
+#ifdef CONFIG_SMP
+# define smp_mb() mb()
+# define smp_rmb() rmb()
+# define smp_wmb() wmb()
+# define smp_read_barrier_depends() read_barrier_depends()
+#else
+# define smp_mb() barrier()
+# define smp_rmb() barrier()
+# define smp_wmb() barrier()
+# define smp_read_barrier_depends() do { } while(0)
+#endif
+
+/*
+ * XXX check on these---I suspect what Linus really wants here is
+ * acquire vs release semantics but we can't discuss this stuff with
+ * Linus just yet. Grrr...
+ */
+#define set_mb(var, value) do { (var) = (value); mb(); } while (0)
+#define set_wmb(var, value) do { (var) = (value); mb(); } while (0)
+
+#define safe_halt() ia64_pal_halt_light() /* PAL_HALT_LIGHT */
+
+/*
+ * The group barrier in front of the rsm & ssm are necessary to ensure
+ * that none of the previous instructions in the same group are
+ * affected by the rsm/ssm.
+ */
+/* For spinlocks etc */
+
+/*
+ * - clearing psr.i is implicitly serialized (visible by next insn)
+ * - setting psr.i requires data serialization
+ * - we need a stop-bit before reading PSR because we sometimes
+ * write a floating-point register right before reading the PSR
+ * and that writes to PSR.mfl
+ */
+#define __local_irq_save(x) \
+do { \
+ ia64_stop(); \
+ (x) = ia64_getreg(_IA64_REG_PSR); \
+ ia64_stop(); \
+ ia64_rsm(IA64_PSR_I); \
+} while (0)
+
+#define __local_irq_disable() \
+do { \
+ ia64_stop(); \
+ ia64_rsm(IA64_PSR_I); \
+} while (0)
+
+#define __local_irq_restore(x) ia64_intrin_local_irq_restore((x) & IA64_PSR_I)
+
+#ifdef CONFIG_IA64_DEBUG_IRQ
+
+ extern unsigned long last_cli_ip;
+
+# define __save_ip() last_cli_ip = ia64_getreg(_IA64_REG_IP)
+
+# define local_irq_save(x) \
+do { \
+ unsigned long psr; \
+ \
+ __local_irq_save(psr); \
+ if (psr & IA64_PSR_I) \
+ __save_ip(); \
+ (x) = psr; \
+} while (0)
+
+# define local_irq_disable() do { unsigned long x; local_irq_save(x); } while (0)
+
+# define local_irq_restore(x) \
+do { \
+ unsigned long old_psr, psr = (x); \
+ \
+ local_save_flags(old_psr); \
+ __local_irq_restore(psr); \
+ if ((old_psr & IA64_PSR_I) && !(psr & IA64_PSR_I)) \
+ __save_ip(); \
+} while (0)
+
+#else /* !CONFIG_IA64_DEBUG_IRQ */
+# define local_irq_save(x) __local_irq_save(x)
+# define local_irq_disable() __local_irq_disable()
+# define local_irq_restore(x) __local_irq_restore(x)
+#endif /* !CONFIG_IA64_DEBUG_IRQ */
+
+#define local_irq_enable() ({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
+#define local_save_flags(flags) ({ ia64_stop(); (flags) = ia64_getreg(_IA64_REG_PSR); })
+
+#define irqs_disabled() \
+({ \
+ unsigned long __ia64_id_flags; \
+ local_save_flags(__ia64_id_flags); \
+ (__ia64_id_flags & IA64_PSR_I) == 0; \
+})
+
+#ifdef __KERNEL__
+
+#define prepare_to_switch() do { } while(0)
+
+#ifdef CONFIG_IA32_SUPPORT
+# define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0)
+#else
+# define IS_IA32_PROCESS(regs) 0
+struct task_struct;
+static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
+static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
+#endif
+
+/*
+ * Context switch from one thread to another. If the two threads have
+ * different address spaces, schedule() has already taken care of
+ * switching to the new address space by calling switch_mm().
+ *
+ * Disabling access to the fph partition and the debug-register
+ * context switch MUST be done before calling ia64_switch_to() since a
+ * newly created thread returns directly to
+ * ia64_ret_from_syscall_clear_r8.
+ */
+extern struct task_struct *ia64_switch_to (void *next_task);
+
+struct task_struct;
+
+extern void ia64_save_extra (struct task_struct *task);
+extern void ia64_load_extra (struct task_struct *task);
+
+#ifdef CONFIG_PERFMON
+ DECLARE_PER_CPU(unsigned long, pfm_syst_info);
+# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
+#else
+# define PERFMON_IS_SYSWIDE() (0)
+#endif
+
+#define IA64_HAS_EXTRA_STATE(t) \
+ ((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID) \
+ || IS_IA32_PROCESS(ia64_task_regs(t)) || PERFMON_IS_SYSWIDE())
+
+#define __switch_to(prev,next,last) do { \
+ if (IA64_HAS_EXTRA_STATE(prev)) \
+ ia64_save_extra(prev); \
+ if (IA64_HAS_EXTRA_STATE(next)) \
+ ia64_load_extra(next); \
+ ia64_psr(ia64_task_regs(next))->dfh = !ia64_is_local_fpu_owner(next); \
+ (last) = ia64_switch_to((next)); \
+} while (0)
+
+#ifdef CONFIG_SMP
+/*
+ * In the SMP case, we save the fph state when context-switching away from a thread that
+ * modified fph. This way, when the thread gets scheduled on another CPU, the CPU can
+ * pick up the state from task->thread.fph, avoiding the complication of having to fetch
+ * the latest fph state from another CPU. In other words: eager save, lazy restore.
+ */
+# define switch_to(prev,next,last) do { \
+ if (ia64_psr(ia64_task_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) { \
+ ia64_psr(ia64_task_regs(prev))->mfh = 0; \
+ (prev)->thread.flags |= IA64_THREAD_FPH_VALID; \
+ __ia64_save_fpu((prev)->thread.fph); \
+ } \
+ __switch_to(prev, next, last); \
+} while (0)
+#else
+# define switch_to(prev,next,last) __switch_to(prev, next, last)
+#endif
+
+/*
+ * On IA-64, we don't want to hold the runqueue's lock during the low-level context-switch,
+ * because that could cause a deadlock. Here is an example by Erich Focht:
+ *
+ * Example:
+ * CPU#0:
+ * schedule()
+ * -> spin_lock_irq(&rq->lock)
+ * -> context_switch()
+ * -> wrap_mmu_context()
+ * -> read_lock(&tasklist_lock)
+ *
+ * CPU#1:
+ * sys_wait4() or release_task() or forget_original_parent()
+ * -> write_lock(&tasklist_lock)
+ * -> do_notify_parent()
+ * -> wake_up_parent()
+ * -> try_to_wake_up()
+ * -> spin_lock_irq(&parent_rq->lock)
+ *
+ * If the parent's rq happens to be on CPU#0, we'll wait for the rq->lock
+ * of that CPU which will not be released, because there we wait for the
+ * tasklist_lock to become available.
+ */
+#define prepare_arch_switch(rq, next) \
+do { \
+ spin_lock(&(next)->switch_lock); \
+ spin_unlock(&(rq)->lock); \
+} while (0)
+#define finish_arch_switch(rq, prev) spin_unlock_irq(&(prev)->switch_lock)
+#define task_running(rq, p) ((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock))
+
+#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
+
+void cpu_idle_wait(void);
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SYSTEM_H */
diff --git a/include/asm-ia64/termbits.h b/include/asm-ia64/termbits.h
new file mode 100644
index 0000000..b9e843f
--- /dev/null
+++ b/include/asm-ia64/termbits.h
@@ -0,0 +1,182 @@
+#ifndef _ASM_IA64_TERMBITS_H
+#define _ASM_IA64_TERMBITS_H
+
+/*
+ * Based on <asm-i386/termbits.h>.
+ *
+ * Modified 1999
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28 Added new baudrates
+ */
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _ASM_IA64_TERMBITS_H */
diff --git a/include/asm-ia64/termios.h b/include/asm-ia64/termios.h
new file mode 100644
index 0000000..42c9569
--- /dev/null
+++ b/include/asm-ia64/termios.h
@@ -0,0 +1,113 @@
+#ifndef _ASM_IA64_TERMIOS_H
+#define _ASM_IA64_TERMIOS_H
+
+/*
+ * Modified 1999
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28 Added N_IRDA and N_SMSBLOCK
+ */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY 0
+#define N_SLIP 1
+#define N_MOUSE 2
+#define N_PPP 3
+#define N_STRIP 4
+#define N_AX25 5
+#define N_X25 6 /* X.25 async */
+#define N_6PACK 7
+#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964 9 /* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS msgs */
+#define N_HDLC 13 /* synchronous HDLC */
+#define N_SYNC_PPP 14 /* synchronous PPP */
+#define N_HCI 15 /* Bluetooth HCI UART */
+
+# ifdef __KERNEL__
+
+/* intr=^C quit=^\ erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+ unsigned short __tmp; \
+ get_user(__tmp,&(termio)->x); \
+ *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+# endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_TERMIOS_H */
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
new file mode 100644
index 0000000..8d5b7e7
--- /dev/null
+++ b/include/asm-ia64/thread_info.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_THREAD_INFO_H
+#define _ASM_IA64_THREAD_INFO_H
+
+#include <asm/offsets.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+#define PREEMPT_ACTIVE_BIT 30
+#define PREEMPT_ACTIVE (1 << PREEMPT_ACTIVE_BIT)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * On IA-64, we want to keep the task structure and kernel stack together, so they can be
+ * mapped by a single TLB entry and so they can be addressed by the "current" pointer
+ * without having to do pointer masking.
+ */
+struct thread_info {
+ struct task_struct *task; /* XXX not really needed, except for dup_task_struct() */
+ struct exec_domain *exec_domain;/* execution domain */
+ __u32 flags; /* thread_info flags (see TIF_*) */
+ __u32 cpu; /* current CPU */
+ mm_segment_t addr_limit; /* user-level address space limit */
+ __s32 preempt_count; /* 0=premptable, <0=BUG; will also serve as bh-counter */
+ struct restart_block restart_block;
+ struct {
+ int signo;
+ int code;
+ void __user *addr;
+ unsigned long start_time;
+ pid_t pid;
+ } sigdelayed; /* Saved information for TIF_SIGDELAYED */
+};
+
+#define THREAD_SIZE KERNEL_STACK_SIZE
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .addr_limit = KERNEL_DS, \
+ .preempt_count = 0, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+/* how to get the thread information struct from C */
+#define current_thread_info() ((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
+#define alloc_thread_info(tsk) ((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#define free_thread_info(ti) /* nothing */
+
+#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
+#define alloc_task_struct() ((task_t *)__get_free_pages(GFP_KERNEL, KERNEL_STACK_SIZE_ORDER))
+#define free_task_struct(tsk) free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
+
+#endif /* !__ASSEMBLY */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in least-significant 16 bits, other flags
+ * in top 16 bits
+ */
+#define TIF_NOTIFY_RESUME 0 /* resumption notification requested */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_SYSCALL_TRACE 3 /* syscall trace active */
+#define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */
+#define TIF_SIGDELAYED 5 /* signal delayed from MCA/INIT/NMI/PMI context */
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE 17
+
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_SIGDELAYED (1 << TIF_SIGDELAYED)
+#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
+
+/* "work to do on user-return" bits */
+#define TIF_ALLWORK_MASK (_TIF_NOTIFY_RESUME|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SIGDELAYED)
+/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */
+#define TIF_WORK_MASK (TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
+
+#endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/include/asm-ia64/timex.h b/include/asm-ia64/timex.h
new file mode 100644
index 0000000..414aae0
--- /dev/null
+++ b/include/asm-ia64/timex.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_IA64_TIMEX_H
+#define _ASM_IA64_TIMEX_H
+
+/*
+ * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * 2001/01/18 davidm Removed CLOCK_TICK_RATE. It makes no sense on IA-64.
+ * Also removed cacheflush_time as it's entirely unused.
+ */
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+typedef unsigned long cycles_t;
+
+/*
+ * For performance reasons, we don't want to define CLOCK_TICK_TRATE as
+ * local_cpu_data->itc_rate. Fortunately, we don't have to, either: according to George
+ * Anzinger, 1/CLOCK_TICK_RATE is taken as the resolution of the timer clock. The time
+ * calculation assumes that you will use enough of these so that your tick size <= 1/HZ.
+ * If the calculation shows that your CLOCK_TICK_RATE can not supply exactly 1/HZ ticks,
+ * the actual value is calculated and used to update the wall clock each jiffie. Setting
+ * the CLOCK_TICK_RATE to x*HZ insures that the calculation will find no errors. Hence we
+ * pick a multiple of HZ which gives us a (totally virtual) CLOCK_TICK_RATE of about
+ * 100MHz.
+ */
+#define CLOCK_TICK_RATE (HZ * 100000UL)
+
+static inline cycles_t
+get_cycles (void)
+{
+ cycles_t ret;
+
+ ret = ia64_getreg(_IA64_REG_AR_ITC);
+ return ret;
+}
+
+#endif /* _ASM_IA64_TIMEX_H */
diff --git a/include/asm-ia64/tlb.h b/include/asm-ia64/tlb.h
new file mode 100644
index 0000000..3a9a6d1
--- /dev/null
+++ b/include/asm-ia64/tlb.h
@@ -0,0 +1,245 @@
+#ifndef _ASM_IA64_TLB_H
+#define _ASM_IA64_TLB_H
+/*
+ * Based on <asm-generic/tlb.h>.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * Removing a translation from a page table (including TLB-shootdown) is a four-step
+ * procedure:
+ *
+ * (1) Flush (virtual) caches --- ensures virtual memory is coherent with kernel memory
+ * (this is a no-op on ia64).
+ * (2) Clear the relevant portions of the page-table
+ * (3) Flush the TLBs --- ensures that stale content is gone from CPU TLBs
+ * (4) Release the pages that were freed up in step (2).
+ *
+ * Note that the ordering of these steps is crucial to avoid races on MP machines.
+ *
+ * The Linux kernel defines several platform-specific hooks for TLB-shootdown. When
+ * unmapping a portion of the virtual address space, these hooks are called according to
+ * the following template:
+ *
+ * tlb <- tlb_gather_mmu(mm, full_mm_flush); // start unmap for address space MM
+ * {
+ * for each vma that needs a shootdown do {
+ * tlb_start_vma(tlb, vma);
+ * for each page-table-entry PTE that needs to be removed do {
+ * tlb_remove_tlb_entry(tlb, pte, address);
+ * if (pte refers to a normal page) {
+ * tlb_remove_page(tlb, page);
+ * }
+ * }
+ * tlb_end_vma(tlb, vma);
+ * }
+ * }
+ * tlb_finish_mmu(tlb, start, end); // finish unmap for address space MM
+ */
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/processor.h>
+#include <asm/tlbflush.h>
+#include <asm/machvec.h>
+
+#ifdef CONFIG_SMP
+# define FREE_PTE_NR 2048
+# define tlb_fast_mode(tlb) ((tlb)->nr == ~0U)
+#else
+# define FREE_PTE_NR 0
+# define tlb_fast_mode(tlb) (1)
+#endif
+
+struct mmu_gather {
+ struct mm_struct *mm;
+ unsigned int nr; /* == ~0U => fast mode */
+ unsigned char fullmm; /* non-zero means full mm flush */
+ unsigned char need_flush; /* really unmapped some PTEs? */
+ unsigned long freed; /* number of pages freed */
+ unsigned long start_addr;
+ unsigned long end_addr;
+ struct page *pages[FREE_PTE_NR];
+};
+
+/* Users of the generic TLB shootdown code must declare this storage space. */
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/*
+ * Flush the TLB for address range START to END and, if not in fast mode, release the
+ * freed pages that where gathered up to this point.
+ */
+static inline void
+ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+ unsigned int nr;
+
+ if (!tlb->need_flush)
+ return;
+ tlb->need_flush = 0;
+
+ if (tlb->fullmm) {
+ /*
+ * Tearing down the entire address space. This happens both as a result
+ * of exit() and execve(). The latter case necessitates the call to
+ * flush_tlb_mm() here.
+ */
+ flush_tlb_mm(tlb->mm);
+ } else if (unlikely (end - start >= 1024*1024*1024*1024UL
+ || REGION_NUMBER(start) != REGION_NUMBER(end - 1)))
+ {
+ /*
+ * If we flush more than a tera-byte or across regions, we're probably
+ * better off just flushing the entire TLB(s). This should be very rare
+ * and is not worth optimizing for.
+ */
+ flush_tlb_all();
+ } else {
+ /*
+ * XXX fix me: flush_tlb_range() should take an mm pointer instead of a
+ * vma pointer.
+ */
+ struct vm_area_struct vma;
+
+ vma.vm_mm = tlb->mm;
+ /* flush the address range from the tlb: */
+ flush_tlb_range(&vma, start, end);
+ /* now flush the virt. page-table area mapping the address range: */
+ flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end));
+ }
+
+ /* lastly, release the freed pages */
+ nr = tlb->nr;
+ if (!tlb_fast_mode(tlb)) {
+ unsigned long i;
+ tlb->nr = 0;
+ tlb->start_addr = ~0UL;
+ for (i = 0; i < nr; ++i)
+ free_page_and_swap_cache(tlb->pages[i]);
+ }
+}
+
+/*
+ * Return a pointer to an initialized struct mmu_gather.
+ */
+static inline struct mmu_gather *
+tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush)
+{
+ struct mmu_gather *tlb = &__get_cpu_var(mmu_gathers);
+
+ tlb->mm = mm;
+ /*
+ * Use fast mode if only 1 CPU is online.
+ *
+ * It would be tempting to turn on fast-mode for full_mm_flush as well. But this
+ * doesn't work because of speculative accesses and software prefetching: the page
+ * table of "mm" may (and usually is) the currently active page table and even
+ * though the kernel won't do any user-space accesses during the TLB shoot down, a
+ * compiler might use speculation or lfetch.fault on what happens to be a valid
+ * user-space address. This in turn could trigger a TLB miss fault (or a VHPT
+ * walk) and re-insert a TLB entry we just removed. Slow mode avoids such
+ * problems. (We could make fast-mode work by switching the current task to a
+ * different "mm" during the shootdown.) --davidm 08/02/2002
+ */
+ tlb->nr = (num_online_cpus() == 1) ? ~0U : 0;
+ tlb->fullmm = full_mm_flush;
+ tlb->freed = 0;
+ tlb->start_addr = ~0UL;
+ return tlb;
+}
+
+/*
+ * Called at the end of the shootdown operation to free up any resources that were
+ * collected. The page table lock is still held at this point.
+ */
+static inline void
+tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+ unsigned long freed = tlb->freed;
+ struct mm_struct *mm = tlb->mm;
+ unsigned long rss = get_mm_counter(mm, rss);
+
+ if (rss < freed)
+ freed = rss;
+ add_mm_counter(mm, rss, -freed);
+ /*
+ * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and
+ * tlb->end_addr.
+ */
+ ia64_tlb_flush_mmu(tlb, start, end);
+
+ /* keep the page table cache within bounds */
+ check_pgt_cache();
+}
+
+static inline unsigned int
+tlb_is_full_mm(struct mmu_gather *tlb)
+{
+ return tlb->fullmm;
+}
+
+/*
+ * Logically, this routine frees PAGE. On MP machines, the actual freeing of the page
+ * must be delayed until after the TLB has been flushed (see comments at the beginning of
+ * this file).
+ */
+static inline void
+tlb_remove_page (struct mmu_gather *tlb, struct page *page)
+{
+ tlb->need_flush = 1;
+
+ if (tlb_fast_mode(tlb)) {
+ free_page_and_swap_cache(page);
+ return;
+ }
+ tlb->pages[tlb->nr++] = page;
+ if (tlb->nr >= FREE_PTE_NR)
+ ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr);
+}
+
+/*
+ * Remove TLB entry for PTE mapped at virtual address ADDRESS. This is called for any
+ * PTE, not just those pointing to (normal) physical memory.
+ */
+static inline void
+__tlb_remove_tlb_entry (struct mmu_gather *tlb, pte_t *ptep, unsigned long address)
+{
+ if (tlb->start_addr == ~0UL)
+ tlb->start_addr = address;
+ tlb->end_addr = address + PAGE_SIZE;
+}
+
+#define tlb_migrate_finish(mm) platform_tlb_migrate_finish(mm)
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+
+#define tlb_remove_tlb_entry(tlb, ptep, addr) \
+do { \
+ tlb->need_flush = 1; \
+ __tlb_remove_tlb_entry(tlb, ptep, addr); \
+} while (0)
+
+#define pte_free_tlb(tlb, ptep) \
+do { \
+ tlb->need_flush = 1; \
+ __pte_free_tlb(tlb, ptep); \
+} while (0)
+
+#define pmd_free_tlb(tlb, ptep) \
+do { \
+ tlb->need_flush = 1; \
+ __pmd_free_tlb(tlb, ptep); \
+} while (0)
+
+#define pud_free_tlb(tlb, pudp) \
+do { \
+ tlb->need_flush = 1; \
+ __pud_free_tlb(tlb, pudp); \
+} while (0)
+
+#endif /* _ASM_IA64_TLB_H */
diff --git a/include/asm-ia64/tlbflush.h b/include/asm-ia64/tlbflush.h
new file mode 100644
index 0000000..b65c627
--- /dev/null
+++ b/include/asm-ia64/tlbflush.h
@@ -0,0 +1,99 @@
+#ifndef _ASM_IA64_TLBFLUSH_H
+#define _ASM_IA64_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+
+/*
+ * Now for some TLB flushing routines. This is the kind of stuff that
+ * can be very expensive, so try to avoid them whenever possible.
+ */
+
+/*
+ * Flush everything (kernel mapping may also have changed due to
+ * vmalloc/vfree).
+ */
+extern void local_flush_tlb_all (void);
+
+#ifdef CONFIG_SMP
+ extern void smp_flush_tlb_all (void);
+ extern void smp_flush_tlb_mm (struct mm_struct *mm);
+# define flush_tlb_all() smp_flush_tlb_all()
+#else
+# define flush_tlb_all() local_flush_tlb_all()
+#endif
+
+static inline void
+local_finish_flush_tlb_mm (struct mm_struct *mm)
+{
+ if (mm == current->active_mm)
+ activate_context(mm);
+}
+
+/*
+ * Flush a specified user mapping. This is called, e.g., as a result of fork() and
+ * exit(). fork() ends up here because the copy-on-write mechanism needs to write-protect
+ * the PTEs of the parent task.
+ */
+static inline void
+flush_tlb_mm (struct mm_struct *mm)
+{
+ if (!mm)
+ return;
+
+ mm->context = 0;
+
+ if (atomic_read(&mm->mm_users) == 0)
+ return; /* happens as a result of exit_mmap() */
+
+#ifdef CONFIG_SMP
+ smp_flush_tlb_mm(mm);
+#else
+ local_finish_flush_tlb_mm(mm);
+#endif
+}
+
+extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end);
+
+/*
+ * Page-granular tlb flush.
+ */
+static inline void
+flush_tlb_page (struct vm_area_struct *vma, unsigned long addr)
+{
+#ifdef CONFIG_SMP
+ flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE);
+#else
+ if (vma->vm_mm == current->active_mm)
+ ia64_ptcl(addr, (PAGE_SHIFT << 2));
+ else
+ vma->vm_mm->context = 0;
+#endif
+}
+
+/*
+ * Flush the TLB entries mapping the virtually mapped linear page
+ * table corresponding to address range [START-END).
+ */
+static inline void
+flush_tlb_pgtables (struct mm_struct *mm, unsigned long start, unsigned long end)
+{
+ /*
+ * Deprecated. The virtual page table is now flushed via the normal gather/flush
+ * interface (see tlb.h).
+ */
+}
+
+#define flush_tlb_kernel_range(start, end) flush_tlb_all() /* XXX fix me */
+
+#endif /* _ASM_IA64_TLBFLUSH_H */
diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h
new file mode 100644
index 0000000..21cf351
--- /dev/null
+++ b/include/asm-ia64/topology.h
@@ -0,0 +1,90 @@
+/*
+ * linux/include/asm-ia64/topology.h
+ *
+ * Copyright (C) 2002, Erich Focht, NEC
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _ASM_IA64_TOPOLOGY_H
+#define _ASM_IA64_TOPOLOGY_H
+
+#include <asm/acpi.h>
+#include <asm/numa.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_NUMA
+/*
+ * Returns the number of the node containing CPU 'cpu'
+ */
+#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
+
+/*
+ * Returns a bitmask of CPUs on Node 'node'.
+ */
+#define node_to_cpumask(node) (node_to_cpu_mask[node])
+
+/*
+ * Returns the number of the node containing Node 'nid'.
+ * Not implemented here. Multi-level hierarchies detected with
+ * the help of node_distance().
+ */
+#define parent_node(nid) (nid)
+
+/*
+ * Returns the number of the first CPU on Node 'node'.
+ */
+#define node_to_first_cpu(node) (__ffs(node_to_cpumask(node)))
+
+void build_cpu_to_node_map(void);
+
+/* sched_domains SD_NODE_INIT for IA64 NUMA machines */
+#define SD_NODE_INIT (struct sched_domain) { \
+ .span = CPU_MASK_NONE, \
+ .parent = NULL, \
+ .groups = NULL, \
+ .min_interval = 80, \
+ .max_interval = 320, \
+ .busy_factor = 320, \
+ .imbalance_pct = 125, \
+ .cache_hot_time = (10*1000000), \
+ .cache_nice_tries = 1, \
+ .per_cpu_gain = 100, \
+ .flags = SD_LOAD_BALANCE \
+ | SD_BALANCE_EXEC \
+ | SD_BALANCE_NEWIDLE \
+ | SD_WAKE_IDLE \
+ | SD_WAKE_BALANCE, \
+ .last_balance = jiffies, \
+ .balance_interval = 1, \
+ .nr_balance_failed = 0, \
+}
+
+/* sched_domains SD_ALLNODES_INIT for IA64 NUMA machines */
+#define SD_ALLNODES_INIT (struct sched_domain) { \
+ .span = CPU_MASK_NONE, \
+ .parent = NULL, \
+ .groups = NULL, \
+ .min_interval = 80, \
+ .max_interval = 320, \
+ .busy_factor = 320, \
+ .imbalance_pct = 125, \
+ .cache_hot_time = (10*1000000), \
+ .cache_nice_tries = 1, \
+ .per_cpu_gain = 100, \
+ .flags = SD_LOAD_BALANCE \
+ | SD_BALANCE_EXEC, \
+ .last_balance = jiffies, \
+ .balance_interval = 100*(63+num_online_cpus())/64, \
+ .nr_balance_failed = 0, \
+}
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_IA64_TOPOLOGY_H */
diff --git a/include/asm-ia64/types.h b/include/asm-ia64/types.h
new file mode 100644
index 0000000..a677565
--- /dev/null
+++ b/include/asm-ia64/types.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_IA64_TYPES_H
+#define _ASM_IA64_TYPES_H
+
+/*
+ * This file is never included by application software unless explicitly requested (e.g.,
+ * via linux/types.h) in which case the application is Linux specific so (user-) name
+ * space pollution is not a major issue. However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * Based on <asm-alpha/types.h>.
+ *
+ * Modified 1998-2000, 2002
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#ifdef __ASSEMBLY__
+# define __IA64_UL(x) (x)
+# define __IA64_UL_CONST(x) x
+
+# ifdef __KERNEL__
+# define BITS_PER_LONG 64
+# endif
+
+#else
+# define __IA64_UL(x) ((unsigned long)(x))
+# define __IA64_UL_CONST(x) x##UL
+
+typedef unsigned int umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+# ifdef __KERNEL__
+
+typedef __s8 s8;
+typedef __u8 u8;
+
+typedef __s16 s16;
+typedef __u16 u16;
+
+typedef __s32 s32;
+typedef __u32 u32;
+
+typedef __s64 s64;
+typedef __u64 u64;
+
+#define BITS_PER_LONG 64
+
+/* DMA addresses are 64-bits wide, in general. */
+
+typedef u64 dma_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+# endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_TYPES_H */
diff --git a/include/asm-ia64/uaccess.h b/include/asm-ia64/uaccess.h
new file mode 100644
index 0000000..8edd9a9
--- /dev/null
+++ b/include/asm-ia64/uaccess.h
@@ -0,0 +1,408 @@
+#ifndef _ASM_IA64_UACCESS_H
+#define _ASM_IA64_UACCESS_H
+
+/*
+ * This file defines various macros to transfer memory areas across
+ * the user/kernel boundary. This needs to be done carefully because
+ * this code is executed in kernel mode and uses user-specified
+ * addresses. Thus, we need to be careful not to let the user to
+ * trick us into accessing kernel memory that would normally be
+ * inaccessible. This code is also fairly performance sensitive,
+ * so we want to spend as little time doing safety checks as
+ * possible.
+ *
+ * To make matters a bit more interesting, these macros sometimes also
+ * called from within the kernel itself, in which case the address
+ * validity check must be skipped. The get_fs() macro tells us what
+ * to do: if get_fs()==USER_DS, checking is performed, if
+ * get_fs()==KERNEL_DS, checking is bypassed.
+ *
+ * Note that even if the memory area specified by the user is in a
+ * valid address range, it is still possible that we'll get a page
+ * fault while accessing it. This is handled by filling out an
+ * exception handler fixup entry for each instruction that has the
+ * potential to fault. When such a fault occurs, the page fault
+ * handler checks to see whether the faulting instruction has a fixup
+ * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and
+ * then resumes execution at the continuation point.
+ *
+ * Based on <asm-alpha/uaccess.h>.
+ *
+ * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/page-flags.h>
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+
+/*
+ * For historical reasons, the following macros are grossly misnamed:
+ */
+#define KERNEL_DS ((mm_segment_t) { ~0UL }) /* cf. access_ok() */
+#define USER_DS ((mm_segment_t) { TASK_SIZE-1 }) /* cf. access_ok() */
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+/*
+ * When accessing user memory, we need to make sure the entire area really is in
+ * user-level space. In order to do this efficiently, we make sure that the page at
+ * address TASK_SIZE is never valid. We also need to make sure that the address doesn't
+ * point inside the virtually mapped linear page table.
+ */
+#define __access_ok(addr, size, segment) \
+({ \
+ __chk_user_ptr(addr); \
+ (likely((unsigned long) (addr) <= (segment).seg) \
+ && ((segment).seg == KERNEL_DS.seg \
+ || likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT))); \
+})
+#define access_ok(type, addr, size) __access_ok((addr), (size), get_fs())
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated
+verify_area (int type, const void __user *addr, unsigned long size)
+{
+ return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x, ptr) __put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs())
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the programmer has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr) __put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+extern long __put_user_unaligned_unknown (void);
+
+#define __put_user_unaligned(x, ptr) \
+({ \
+ long __ret; \
+ switch (sizeof(*(ptr))) { \
+ case 1: __ret = __put_user((x), (ptr)); break; \
+ case 2: __ret = (__put_user((x), (u8 __user *)(ptr))) \
+ | (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break; \
+ case 4: __ret = (__put_user((x), (u16 __user *)(ptr))) \
+ | (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break; \
+ case 8: __ret = (__put_user((x), (u32 __user *)(ptr))) \
+ | (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break; \
+ default: __ret = __put_user_unaligned_unknown(); \
+ } \
+ __ret; \
+})
+
+extern long __get_user_unaligned_unknown (void);
+
+#define __get_user_unaligned(x, ptr) \
+({ \
+ long __ret; \
+ switch (sizeof(*(ptr))) { \
+ case 1: __ret = __get_user((x), (ptr)); break; \
+ case 2: __ret = (__get_user((x), (u8 __user *)(ptr))) \
+ | (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break; \
+ case 4: __ret = (__get_user((x), (u16 __user *)(ptr))) \
+ | (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break; \
+ case 8: __ret = (__get_user((x), (u32 __user *)(ptr))) \
+ | (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break; \
+ default: __ret = __get_user_unaligned_unknown(); \
+ } \
+ __ret; \
+})
+
+#ifdef ASM_SUPPORTED
+ struct __large_struct { unsigned long buf[100]; };
+# define __m(x) (*(struct __large_struct __user *)(x))
+
+/* We need to declare the __ex_table section before we can use it in .xdata. */
+asm (".section \"__ex_table\", \"a\"\n\t.previous");
+
+# define __get_user_size(val, addr, n, err) \
+do { \
+ register long __gu_r8 asm ("r8") = 0; \
+ register long __gu_r9 asm ("r9"); \
+ asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n" \
+ "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n" \
+ "[1:]" \
+ : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8)); \
+ (err) = __gu_r8; \
+ (val) = __gu_r9; \
+} while (0)
+
+/*
+ * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it. This
+ * is because they do not write to any memory gcc knows about, so there are no aliasing
+ * issues.
+ */
+# define __put_user_size(val, addr, n, err) \
+do { \
+ register long __pu_r8 asm ("r8") = 0; \
+ asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n" \
+ "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n" \
+ "[1:]" \
+ : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8)); \
+ (err) = __pu_r8; \
+} while (0)
+
+#else /* !ASM_SUPPORTED */
+# define RELOC_TYPE 2 /* ip-rel */
+# define __get_user_size(val, addr, n, err) \
+do { \
+ __ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE); \
+ (err) = ia64_getreg(_IA64_REG_R8); \
+ (val) = ia64_getreg(_IA64_REG_R9); \
+} while (0)
+# define __put_user_size(val, addr, n, err) \
+do { \
+ __st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE, (unsigned long) (val)); \
+ (err) = ia64_getreg(_IA64_REG_R8); \
+} while (0)
+#endif /* !ASM_SUPPORTED */
+
+extern void __get_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 and r9 (among others). Thus, be careful not to evaluate it while
+ * using r8/r9.
+ */
+#define __do_get_user(check, x, ptr, size, segment) \
+({ \
+ const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
+ __typeof__ (size) __gu_size = (size); \
+ long __gu_err = -EFAULT, __gu_val = 0; \
+ \
+ if (!check || __access_ok(__gu_ptr, size, segment)) \
+ switch (__gu_size) { \
+ case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break; \
+ case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break; \
+ case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break; \
+ case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break; \
+ default: __get_user_unknown(); break; \
+ } \
+ (x) = (__typeof__(*(__gu_ptr))) __gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_nocheck(x, ptr, size) __do_get_user(0, x, ptr, size, KERNEL_DS)
+#define __get_user_check(x, ptr, size, segment) __do_get_user(1, x, ptr, size, segment)
+
+extern void __put_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 (among others). Thus, be careful not to evaluate them while using r8.
+ */
+#define __do_put_user(check, x, ptr, size, segment) \
+({ \
+ __typeof__ (x) __pu_x = (x); \
+ __typeof__ (*(ptr)) __user *__pu_ptr = (ptr); \
+ __typeof__ (size) __pu_size = (size); \
+ long __pu_err = -EFAULT; \
+ \
+ if (!check || __access_ok(__pu_ptr, __pu_size, segment)) \
+ switch (__pu_size) { \
+ case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break; \
+ case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break; \
+ case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break; \
+ case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break; \
+ default: __put_user_unknown(); break; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_nocheck(x, ptr, size) __do_put_user(0, x, ptr, size, KERNEL_DS)
+#define __put_user_check(x, ptr, size, segment) __do_put_user(1, x, ptr, size, segment)
+
+/*
+ * Complex access routines
+ */
+extern unsigned long __must_check __copy_user (void __user *to, const void __user *from,
+ unsigned long count);
+
+static inline unsigned long
+__copy_to_user (void __user *to, const void *from, unsigned long count)
+{
+ return __copy_user(to, (void __user *) from, count);
+}
+
+static inline unsigned long
+__copy_from_user (void *to, const void __user *from, unsigned long count)
+{
+ return __copy_user((void __user *) to, from, count);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+#define copy_to_user(to, from, n) \
+({ \
+ void __user *__cu_to = (to); \
+ const void *__cu_from = (from); \
+ long __cu_len = (n); \
+ \
+ if (__access_ok(__cu_to, __cu_len, get_fs())) \
+ __cu_len = __copy_user(__cu_to, (void __user *) __cu_from, __cu_len); \
+ __cu_len; \
+})
+
+#define copy_from_user(to, from, n) \
+({ \
+ void *__cu_to = (to); \
+ const void __user *__cu_from = (from); \
+ long __cu_len = (n); \
+ \
+ __chk_user_ptr(__cu_from); \
+ if (__access_ok(__cu_from, __cu_len, get_fs())) \
+ __cu_len = __copy_user((void __user *) __cu_to, __cu_from, __cu_len); \
+ __cu_len; \
+})
+
+#define __copy_in_user(to, from, size) __copy_user((to), (from), (size))
+
+static inline unsigned long
+copy_in_user (void __user *to, const void __user *from, unsigned long n)
+{
+ if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n)))
+ n = __copy_user(to, from, n);
+ return n;
+}
+
+extern unsigned long __do_clear_user (void __user *, unsigned long);
+
+#define __clear_user(to, n) __do_clear_user(to, n)
+
+#define clear_user(to, n) \
+({ \
+ unsigned long __cu_len = (n); \
+ if (__access_ok(to, __cu_len, get_fs())) \
+ __cu_len = __do_clear_user(to, __cu_len); \
+ __cu_len; \
+})
+
+
+/*
+ * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else
+ * strlen.
+ */
+extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len);
+
+#define strncpy_from_user(to, from, n) \
+({ \
+ const char __user * __sfu_from = (from); \
+ long __sfu_ret = -EFAULT; \
+ if (__access_ok(__sfu_from, 0, get_fs())) \
+ __sfu_ret = __strncpy_from_user((to), __sfu_from, (n)); \
+ __sfu_ret; \
+})
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+extern unsigned long __strlen_user (const char __user *);
+
+#define strlen_user(str) \
+({ \
+ const char __user *__su_str = (str); \
+ unsigned long __su_ret = 0; \
+ if (__access_ok(__su_str, 0, get_fs())) \
+ __su_ret = __strlen_user(__su_str); \
+ __su_ret; \
+})
+
+/*
+ * Returns: 0 if exception before NUL or reaching the supplied limit
+ * (N), a value greater than N if the limit would be exceeded, else
+ * strlen.
+ */
+extern unsigned long __strnlen_user (const char __user *, long);
+
+#define strnlen_user(str, len) \
+({ \
+ const char __user *__su_str = (str); \
+ unsigned long __su_ret = 0; \
+ if (__access_ok(__su_str, 0, get_fs())) \
+ __su_ret = __strnlen_user(__su_str, len); \
+ __su_ret; \
+})
+
+/* Generic code can't deal with the location-relative format that we use for compactness. */
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
+
+struct exception_table_entry {
+ int addr; /* location-relative address of insn this fixup is for */
+ int cont; /* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
+};
+
+extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e);
+extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
+
+static inline int
+ia64_done_with_exception (struct pt_regs *regs)
+{
+ const struct exception_table_entry *e;
+ e = search_exception_tables(regs->cr_iip + ia64_psr(regs)->ri);
+ if (e) {
+ ia64_handle_exception(regs, e);
+ return 1;
+ }
+ return 0;
+}
+
+#define ARCH_HAS_TRANSLATE_MEM_PTR 1
+static __inline__ char *
+xlate_dev_mem_ptr (unsigned long p)
+{
+ struct page *page;
+ char * ptr;
+
+ page = pfn_to_page(p >> PAGE_SHIFT);
+ if (PageUncached(page))
+ ptr = (char *)p + __IA64_UNCACHED_OFFSET;
+ else
+ ptr = __va(p);
+
+ return ptr;
+}
+
+/*
+ * Convert a virtual cached kernel memory pointer to an uncached pointer
+ */
+static __inline__ char *
+xlate_dev_kmem_ptr (char * p)
+{
+ struct page *page;
+ char * ptr;
+
+ page = virt_to_page((unsigned long)p >> PAGE_SHIFT);
+ if (PageUncached(page))
+ ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET;
+ else
+ ptr = p;
+
+ return ptr;
+}
+
+#endif /* _ASM_IA64_UACCESS_H */
diff --git a/include/asm-ia64/ucontext.h b/include/asm-ia64/ucontext.h
new file mode 100644
index 0000000..bf573dc
--- /dev/null
+++ b/include/asm-ia64/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_UCONTEXT_H
+#define _ASM_IA64_UCONTEXT_H
+
+struct ucontext {
+ struct sigcontext uc_mcontext;
+};
+
+#define uc_link uc_mcontext.sc_gr[0] /* wrong type; nobody cares */
+#define uc_sigmask uc_mcontext.sc_sigmask
+#define uc_stack uc_mcontext.sc_stack
+
+#endif /* _ASM_IA64_UCONTEXT_H */
diff --git a/include/asm-ia64/unaligned.h b/include/asm-ia64/unaligned.h
new file mode 100644
index 0000000..bb85598
--- /dev/null
+++ b/include/asm-ia64/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_IA64_UNALIGNED_H
+#define _ASM_IA64_UNALIGNED_H
+
+#include <asm-generic/unaligned.h>
+
+#endif /* _ASM_IA64_UNALIGNED_H */
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
new file mode 100644
index 0000000..33e26c5
--- /dev/null
+++ b/include/asm-ia64/unistd.h
@@ -0,0 +1,399 @@
+#ifndef _ASM_IA64_UNISTD_H
+#define _ASM_IA64_UNISTD_H
+
+/*
+ * IA-64 Linux syscall numbers and inline-functions.
+ *
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/break.h>
+
+#define __BREAK_SYSCALL __IA64_BREAK_SYSCALL
+
+#define __NR_ni_syscall 1024
+#define __NR_exit 1025
+#define __NR_read 1026
+#define __NR_write 1027
+#define __NR_open 1028
+#define __NR_close 1029
+#define __NR_creat 1030
+#define __NR_link 1031
+#define __NR_unlink 1032
+#define __NR_execve 1033
+#define __NR_chdir 1034
+#define __NR_fchdir 1035
+#define __NR_utimes 1036
+#define __NR_mknod 1037
+#define __NR_chmod 1038
+#define __NR_chown 1039
+#define __NR_lseek 1040
+#define __NR_getpid 1041
+#define __NR_getppid 1042
+#define __NR_mount 1043
+#define __NR_umount 1044
+#define __NR_setuid 1045
+#define __NR_getuid 1046
+#define __NR_geteuid 1047
+#define __NR_ptrace 1048
+#define __NR_access 1049
+#define __NR_sync 1050
+#define __NR_fsync 1051
+#define __NR_fdatasync 1052
+#define __NR_kill 1053
+#define __NR_rename 1054
+#define __NR_mkdir 1055
+#define __NR_rmdir 1056
+#define __NR_dup 1057
+#define __NR_pipe 1058
+#define __NR_times 1059
+#define __NR_brk 1060
+#define __NR_setgid 1061
+#define __NR_getgid 1062
+#define __NR_getegid 1063
+#define __NR_acct 1064
+#define __NR_ioctl 1065
+#define __NR_fcntl 1066
+#define __NR_umask 1067
+#define __NR_chroot 1068
+#define __NR_ustat 1069
+#define __NR_dup2 1070
+#define __NR_setreuid 1071
+#define __NR_setregid 1072
+#define __NR_getresuid 1073
+#define __NR_setresuid 1074
+#define __NR_getresgid 1075
+#define __NR_setresgid 1076
+#define __NR_getgroups 1077
+#define __NR_setgroups 1078
+#define __NR_getpgid 1079
+#define __NR_setpgid 1080
+#define __NR_setsid 1081
+#define __NR_getsid 1082
+#define __NR_sethostname 1083
+#define __NR_setrlimit 1084
+#define __NR_getrlimit 1085
+#define __NR_getrusage 1086
+#define __NR_gettimeofday 1087
+#define __NR_settimeofday 1088
+#define __NR_select 1089
+#define __NR_poll 1090
+#define __NR_symlink 1091
+#define __NR_readlink 1092
+#define __NR_uselib 1093
+#define __NR_swapon 1094
+#define __NR_swapoff 1095
+#define __NR_reboot 1096
+#define __NR_truncate 1097
+#define __NR_ftruncate 1098
+#define __NR_fchmod 1099
+#define __NR_fchown 1100
+#define __NR_getpriority 1101
+#define __NR_setpriority 1102
+#define __NR_statfs 1103
+#define __NR_fstatfs 1104
+#define __NR_gettid 1105
+#define __NR_semget 1106
+#define __NR_semop 1107
+#define __NR_semctl 1108
+#define __NR_msgget 1109
+#define __NR_msgsnd 1110
+#define __NR_msgrcv 1111
+#define __NR_msgctl 1112
+#define __NR_shmget 1113
+#define __NR_shmat 1114
+#define __NR_shmdt 1115
+#define __NR_shmctl 1116
+/* also known as klogctl() in GNU libc: */
+#define __NR_syslog 1117
+#define __NR_setitimer 1118
+#define __NR_getitimer 1119
+/* 1120 was __NR_old_stat */
+/* 1121 was __NR_old_lstat */
+/* 1122 was __NR_old_fstat */
+#define __NR_vhangup 1123
+#define __NR_lchown 1124
+#define __NR_remap_file_pages 1125
+#define __NR_wait4 1126
+#define __NR_sysinfo 1127
+#define __NR_clone 1128
+#define __NR_setdomainname 1129
+#define __NR_uname 1130
+#define __NR_adjtimex 1131
+/* 1132 was __NR_create_module */
+#define __NR_init_module 1133
+#define __NR_delete_module 1134
+/* 1135 was __NR_get_kernel_syms */
+/* 1136 was __NR_query_module */
+#define __NR_quotactl 1137
+#define __NR_bdflush 1138
+#define __NR_sysfs 1139
+#define __NR_personality 1140
+#define __NR_afs_syscall 1141
+#define __NR_setfsuid 1142
+#define __NR_setfsgid 1143
+#define __NR_getdents 1144
+#define __NR_flock 1145
+#define __NR_readv 1146
+#define __NR_writev 1147
+#define __NR_pread64 1148
+#define __NR_pwrite64 1149
+#define __NR__sysctl 1150
+#define __NR_mmap 1151
+#define __NR_munmap 1152
+#define __NR_mlock 1153
+#define __NR_mlockall 1154
+#define __NR_mprotect 1155
+#define __NR_mremap 1156
+#define __NR_msync 1157
+#define __NR_munlock 1158
+#define __NR_munlockall 1159
+#define __NR_sched_getparam 1160
+#define __NR_sched_setparam 1161
+#define __NR_sched_getscheduler 1162
+#define __NR_sched_setscheduler 1163
+#define __NR_sched_yield 1164
+#define __NR_sched_get_priority_max 1165
+#define __NR_sched_get_priority_min 1166
+#define __NR_sched_rr_get_interval 1167
+#define __NR_nanosleep 1168
+#define __NR_nfsservctl 1169
+#define __NR_prctl 1170
+/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
+#define __NR_mmap2 1172
+#define __NR_pciconfig_read 1173
+#define __NR_pciconfig_write 1174
+#define __NR_perfmonctl 1175
+#define __NR_sigaltstack 1176
+#define __NR_rt_sigaction 1177
+#define __NR_rt_sigpending 1178
+#define __NR_rt_sigprocmask 1179
+#define __NR_rt_sigqueueinfo 1180
+#define __NR_rt_sigreturn 1181
+#define __NR_rt_sigsuspend 1182
+#define __NR_rt_sigtimedwait 1183
+#define __NR_getcwd 1184
+#define __NR_capget 1185
+#define __NR_capset 1186
+#define __NR_sendfile 1187
+#define __NR_getpmsg 1188
+#define __NR_putpmsg 1189
+#define __NR_socket 1190
+#define __NR_bind 1191
+#define __NR_connect 1192
+#define __NR_listen 1193
+#define __NR_accept 1194
+#define __NR_getsockname 1195
+#define __NR_getpeername 1196
+#define __NR_socketpair 1197
+#define __NR_send 1198
+#define __NR_sendto 1199
+#define __NR_recv 1200
+#define __NR_recvfrom 1201
+#define __NR_shutdown 1202
+#define __NR_setsockopt 1203
+#define __NR_getsockopt 1204
+#define __NR_sendmsg 1205
+#define __NR_recvmsg 1206
+#define __NR_pivot_root 1207
+#define __NR_mincore 1208
+#define __NR_madvise 1209
+#define __NR_stat 1210
+#define __NR_lstat 1211
+#define __NR_fstat 1212
+#define __NR_clone2 1213
+#define __NR_getdents64 1214
+#define __NR_getunwind 1215
+#define __NR_readahead 1216
+#define __NR_setxattr 1217
+#define __NR_lsetxattr 1218
+#define __NR_fsetxattr 1219
+#define __NR_getxattr 1220
+#define __NR_lgetxattr 1221
+#define __NR_fgetxattr 1222
+#define __NR_listxattr 1223
+#define __NR_llistxattr 1224
+#define __NR_flistxattr 1225
+#define __NR_removexattr 1226
+#define __NR_lremovexattr 1227
+#define __NR_fremovexattr 1228
+#define __NR_tkill 1229
+#define __NR_futex 1230
+#define __NR_sched_setaffinity 1231
+#define __NR_sched_getaffinity 1232
+#define __NR_set_tid_address 1233
+#define __NR_fadvise64 1234
+#define __NR_tgkill 1235
+#define __NR_exit_group 1236
+#define __NR_lookup_dcookie 1237
+#define __NR_io_setup 1238
+#define __NR_io_destroy 1239
+#define __NR_io_getevents 1240
+#define __NR_io_submit 1241
+#define __NR_io_cancel 1242
+#define __NR_epoll_create 1243
+#define __NR_epoll_ctl 1244
+#define __NR_epoll_wait 1245
+#define __NR_restart_syscall 1246
+#define __NR_semtimedop 1247
+#define __NR_timer_create 1248
+#define __NR_timer_settime 1249
+#define __NR_timer_gettime 1250
+#define __NR_timer_getoverrun 1251
+#define __NR_timer_delete 1252
+#define __NR_clock_settime 1253
+#define __NR_clock_gettime 1254
+#define __NR_clock_getres 1255
+#define __NR_clock_nanosleep 1256
+#define __NR_fstatfs64 1257
+#define __NR_statfs64 1258
+#define __NR_mbind 1259
+#define __NR_get_mempolicy 1260
+#define __NR_set_mempolicy 1261
+#define __NR_mq_open 1262
+#define __NR_mq_unlink 1263
+#define __NR_mq_timedsend 1264
+#define __NR_mq_timedreceive 1265
+#define __NR_mq_notify 1266
+#define __NR_mq_getsetattr 1267
+#define __NR_kexec_load 1268
+#define __NR_vserver 1269
+#define __NR_waitid 1270
+#define __NR_add_key 1271
+#define __NR_request_key 1272
+#define __NR_keyctl 1273
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#define NR_syscalls 256 /* length of syscall table */
+
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+#ifdef CONFIG_IA32_SUPPORT
+# define __ARCH_WANT_SYS_FADVISE64
+# define __ARCH_WANT_SYS_GETPGRP
+# define __ARCH_WANT_SYS_LLSEEK
+# define __ARCH_WANT_SYS_NICE
+# define __ARCH_WANT_SYS_OLD_GETRLIMIT
+# define __ARCH_WANT_SYS_OLDUMOUNT
+# define __ARCH_WANT_SYS_SIGPENDING
+# define __ARCH_WANT_SYS_SIGPROCMASK
+# define __ARCH_WANT_COMPAT_SYS_TIME
+#endif
+
+#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+
+extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr);
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <asm/ptrace.h>
+#include <linux/stringify.h>
+#include <linux/syscalls.h>
+
+static inline long
+open (const char * name, int mode, int flags)
+{
+ return sys_open(name, mode, flags);
+}
+
+static inline long
+dup (int fd)
+{
+ return sys_dup(fd);
+}
+
+static inline long
+close (int fd)
+{
+ return sys_close(fd);
+}
+
+static inline off_t
+lseek (int fd, off_t off, int whence)
+{
+ return sys_lseek(fd, off, whence);
+}
+
+static inline void
+_exit (int value)
+{
+ sys_exit(value);
+}
+
+#define exit(x) _exit(x)
+
+static inline long
+write (int fd, const char * buf, size_t nr)
+{
+ return sys_write(fd, buf, nr);
+}
+
+static inline long
+read (int fd, char * buf, size_t nr)
+{
+ return sys_read(fd, buf, nr);
+}
+
+
+static inline long
+setsid (void)
+{
+ return sys_setsid();
+}
+
+static inline pid_t
+waitpid (int pid, int * wait_stat, int flags)
+{
+ return sys_wait4(pid, wait_stat, flags, NULL);
+}
+
+
+extern int execve (const char *filename, char *const av[], char *const ep[]);
+extern pid_t clone (unsigned long flags, void *sp);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+asmlinkage unsigned long sys_mmap(
+ unsigned long addr, unsigned long len,
+ int prot, int flags,
+ int fd, long off);
+asmlinkage unsigned long sys_mmap2(
+ unsigned long addr, unsigned long len,
+ int prot, int flags,
+ int fd, long pgoff);
+struct pt_regs;
+struct sigaction;
+long sys_execve(char __user *filename, char __user * __user *argv,
+ char __user * __user *envp, struct pt_regs *regs);
+asmlinkage long sys_pipe(void);
+asmlinkage long sys_ptrace(long request, pid_t pid,
+ unsigned long addr, unsigned long data);
+asmlinkage long sys_rt_sigaction(int sig,
+ const struct sigaction __user *act,
+ struct sigaction __user *oact,
+ size_t sigsetsize);
+
+/*
+ * "Conditional" syscalls
+ *
+ * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in
+ * kernel/sys_ni.c. This version causes warnings because the declaration isn't a
+ * proper prototype, but we can't use __typeof__ either, because not all cond_syscall()
+ * declarations have prototypes at the moment.
+ */
+#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_IA64_UNISTD_H */
diff --git a/include/asm-ia64/unwind.h b/include/asm-ia64/unwind.h
new file mode 100644
index 0000000..61426ad
--- /dev/null
+++ b/include/asm-ia64/unwind.h
@@ -0,0 +1,240 @@
+#ifndef _ASM_IA64_UNWIND_H
+#define _ASM_IA64_UNWIND_H
+
+/*
+ * Copyright (C) 1999-2000, 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * A simple API for unwinding kernel stacks. This is used for
+ * debugging and error reporting purposes. The kernel doesn't need
+ * full-blown stack unwinding with all the bells and whitles, so there
+ * is not much point in implementing the full IA-64 unwind API (though
+ * it would of course be possible to implement the kernel API on top
+ * of it).
+ */
+
+struct task_struct; /* forward declaration */
+struct switch_stack; /* forward declaration */
+
+enum unw_application_register {
+ UNW_AR_BSP,
+ UNW_AR_BSPSTORE,
+ UNW_AR_PFS,
+ UNW_AR_RNAT,
+ UNW_AR_UNAT,
+ UNW_AR_LC,
+ UNW_AR_EC,
+ UNW_AR_FPSR,
+ UNW_AR_RSC,
+ UNW_AR_CCV,
+ UNW_AR_CSD,
+ UNW_AR_SSD
+};
+
+/*
+ * The following declarations are private to the unwind
+ * implementation:
+ */
+
+struct unw_stack {
+ unsigned long limit;
+ unsigned long top;
+};
+
+#define UNW_FLAG_INTERRUPT_FRAME (1UL << 0)
+
+/*
+ * No user of this module should every access this structure directly
+ * as it is subject to change. It is declared here solely so we can
+ * use automatic variables.
+ */
+struct unw_frame_info {
+ struct unw_stack regstk;
+ struct unw_stack memstk;
+ unsigned int flags;
+ short hint;
+ short prev_script;
+
+ /* current frame info: */
+ unsigned long bsp; /* backing store pointer value */
+ unsigned long sp; /* stack pointer value */
+ unsigned long psp; /* previous sp value */
+ unsigned long ip; /* instruction pointer value */
+ unsigned long pr; /* current predicate values */
+ unsigned long *cfm_loc; /* cfm save location (or NULL) */
+ unsigned long pt; /* struct pt_regs location */
+
+ struct task_struct *task;
+ struct switch_stack *sw;
+
+ /* preserved state: */
+ unsigned long *bsp_loc; /* previous bsp save location */
+ unsigned long *bspstore_loc;
+ unsigned long *pfs_loc;
+ unsigned long *rnat_loc;
+ unsigned long *rp_loc;
+ unsigned long *pri_unat_loc;
+ unsigned long *unat_loc;
+ unsigned long *pr_loc;
+ unsigned long *lc_loc;
+ unsigned long *fpsr_loc;
+ struct unw_ireg {
+ unsigned long *loc;
+ struct unw_ireg_nat {
+ long type : 3; /* enum unw_nat_type */
+ signed long off : 61; /* NaT word is at loc+nat.off */
+ } nat;
+ } r4, r5, r6, r7;
+ unsigned long *b1_loc, *b2_loc, *b3_loc, *b4_loc, *b5_loc;
+ struct ia64_fpreg *f2_loc, *f3_loc, *f4_loc, *f5_loc, *fr_loc[16];
+};
+
+/*
+ * The official API follows below:
+ */
+
+struct unw_table_entry {
+ u64 start_offset;
+ u64 end_offset;
+ u64 info_offset;
+};
+
+/*
+ * Initialize unwind support.
+ */
+extern void unw_init (void);
+
+extern void *unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned long gp,
+ const void *table_start, const void *table_end);
+
+extern void unw_remove_unwind_table (void *handle);
+
+/*
+ * Prepare to unwind blocked task t.
+ */
+extern void unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t);
+
+/*
+ * Prepare to unwind from interruption. The pt-regs and switch-stack structures must have
+ * be "adjacent" (no state modifications between pt-regs and switch-stack).
+ */
+extern void unw_init_from_interruption (struct unw_frame_info *info, struct task_struct *t,
+ struct pt_regs *pt, struct switch_stack *sw);
+
+extern void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t,
+ struct switch_stack *sw);
+
+/*
+ * Prepare to unwind the currently running thread.
+ */
+extern void unw_init_running (void (*callback)(struct unw_frame_info *info, void *arg), void *arg);
+
+/*
+ * Unwind to previous to frame. Returns 0 if successful, negative
+ * number in case of an error.
+ */
+extern int unw_unwind (struct unw_frame_info *info);
+
+/*
+ * Unwind until the return pointer is in user-land (or until an error
+ * occurs). Returns 0 if successful, negative number in case of
+ * error.
+ */
+extern int unw_unwind_to_user (struct unw_frame_info *info);
+
+#define unw_is_intr_frame(info) (((info)->flags & UNW_FLAG_INTERRUPT_FRAME) != 0)
+
+static inline int
+unw_get_ip (struct unw_frame_info *info, unsigned long *valp)
+{
+ *valp = (info)->ip;
+ return 0;
+}
+
+static inline int
+unw_get_sp (struct unw_frame_info *info, unsigned long *valp)
+{
+ *valp = (info)->sp;
+ return 0;
+}
+
+static inline int
+unw_get_psp (struct unw_frame_info *info, unsigned long *valp)
+{
+ *valp = (info)->psp;
+ return 0;
+}
+
+static inline int
+unw_get_bsp (struct unw_frame_info *info, unsigned long *valp)
+{
+ *valp = (info)->bsp;
+ return 0;
+}
+
+static inline int
+unw_get_cfm (struct unw_frame_info *info, unsigned long *valp)
+{
+ *valp = *(info)->cfm_loc;
+ return 0;
+}
+
+static inline int
+unw_set_cfm (struct unw_frame_info *info, unsigned long val)
+{
+ *(info)->cfm_loc = val;
+ return 0;
+}
+
+static inline int
+unw_get_rp (struct unw_frame_info *info, unsigned long *val)
+{
+ if (!info->rp_loc)
+ return -1;
+ *val = *info->rp_loc;
+ return 0;
+}
+
+extern int unw_access_gr (struct unw_frame_info *, int, unsigned long *, char *, int);
+extern int unw_access_br (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_fr (struct unw_frame_info *, int, struct ia64_fpreg *, int);
+extern int unw_access_ar (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_pr (struct unw_frame_info *, unsigned long *, int);
+
+static inline int
+unw_set_gr (struct unw_frame_info *i, int n, unsigned long v, char nat)
+{
+ return unw_access_gr(i, n, &v, &nat, 1);
+}
+
+static inline int
+unw_set_br (struct unw_frame_info *i, int n, unsigned long v)
+{
+ return unw_access_br(i, n, &v, 1);
+}
+
+static inline int
+unw_set_fr (struct unw_frame_info *i, int n, struct ia64_fpreg v)
+{
+ return unw_access_fr(i, n, &v, 1);
+}
+
+static inline int
+unw_set_ar (struct unw_frame_info *i, int n, unsigned long v)
+{
+ return unw_access_ar(i, n, &v, 1);
+}
+
+static inline int
+unw_set_pr (struct unw_frame_info *i, unsigned long v)
+{
+ return unw_access_pr(i, &v, 1);
+}
+
+#define unw_get_gr(i,n,v,nat) unw_access_gr(i,n,v,nat,0)
+#define unw_get_br(i,n,v) unw_access_br(i,n,v,0)
+#define unw_get_fr(i,n,v) unw_access_fr(i,n,v,0)
+#define unw_get_ar(i,n,v) unw_access_ar(i,n,v,0)
+#define unw_get_pr(i,v) unw_access_pr(i,v,0)
+
+#endif /* _ASM_UNWIND_H */
diff --git a/include/asm-ia64/user.h b/include/asm-ia64/user.h
new file mode 100644
index 0000000..78e5a20
--- /dev/null
+++ b/include/asm-ia64/user.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_IA64_USER_H
+#define _ASM_IA64_USER_H
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd). The file contents are as
+ * follows:
+ *
+ * upage: 1 page consisting of a user struct that tells gdb
+ * what is present in the file. Directly after this is a
+ * copy of the task_struct, which is currently not used by gdb,
+ * but it may come in handy at some point. All of the registers
+ * are stored as part of the upage. The upage should always be
+ * only one page long.
+ * data: The data segment follows next. We use current->end_text to
+ * current->brk to pick up all of the user variables, plus any memory
+ * that may have been sbrk'ed. No attempt is made to determine if a
+ * page is demand-zero or if a page is totally unused, we just cover
+ * the entire range. All of the addresses are rounded in such a way
+ * that an integral number of pages is written.
+ * stack: We need the stack information in order to get a meaningful
+ * backtrace. We need to write the data from usp to
+ * current->start_stack, so we round each of these in order to be able
+ * to write an integer number of pages.
+ *
+ * Modified 1998, 1999, 2001
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <linux/ptrace.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+
+#define EF_SIZE 3072 /* XXX fix me */
+
+struct user {
+ unsigned long regs[EF_SIZE/8+32]; /* integer and fp regs */
+ size_t u_tsize; /* text size (pages) */
+ size_t u_dsize; /* data size (pages) */
+ size_t u_ssize; /* stack size (pages) */
+ unsigned long start_code; /* text starting address */
+ unsigned long start_data; /* data starting address */
+ unsigned long start_stack; /* stack starting address */
+ long int signal; /* signal causing core dump */
+ struct regs * u_ar0; /* help gdb find registers */
+ unsigned long magic; /* identifies a core file */
+ char u_comm[32]; /* user command name */
+};
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_DATA_START_ADDR (u.start_data)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_IA64_USER_H */
diff --git a/include/asm-ia64/ustack.h b/include/asm-ia64/ustack.h
new file mode 100644
index 0000000..da55c91
--- /dev/null
+++ b/include/asm-ia64/ustack.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_IA64_USTACK_H
+#define _ASM_IA64_USTACK_H
+
+/*
+ * Constants for the user stack size
+ */
+
+#include <asm/page.h>
+
+/* The absolute hard limit for stack size is 1/2 of the mappable space in the region */
+#define MAX_USER_STACK_SIZE (RGN_MAP_LIMIT/2)
+/* Make a default stack size of 2GB */
+#define DEFAULT_USER_STACK_SIZE (1UL << 31)
+#define STACK_TOP (0x6000000000000000UL + RGN_MAP_LIMIT)
+
+#endif /* _ASM_IA64_USTACK_H */
diff --git a/include/asm-ia64/vga.h b/include/asm-ia64/vga.h
new file mode 100644
index 0000000..1f446d6
--- /dev/null
+++ b/include/asm-ia64/vga.h
@@ -0,0 +1,22 @@
+/*
+ * Access to VGA videoram
+ *
+ * (c) 1998 Martin Mares <mj@ucw.cz>
+ * (c) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * (c) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#ifndef __ASM_IA64_VGA_H_
+#define __ASM_IA64_VGA_H_
+
+/*
+ * On the PC, we can just recalculate addresses and then access the
+ * videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x) ((unsigned long) ioremap((x), 0))
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif /* __ASM_IA64_VGA_H_ */
diff --git a/include/asm-ia64/xor.h b/include/asm-ia64/xor.h
new file mode 100644
index 0000000..41fb874
--- /dev/null
+++ b/include/asm-ia64/xor.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-ia64/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for IA-64.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *,
+ unsigned long *);
+extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *,
+ unsigned long *, unsigned long *);
+extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *,
+ unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_ia64 = {
+ .name = "ia64",
+ .do_2 = xor_ia64_2,
+ .do_3 = xor_ia64_3,
+ .do_4 = xor_ia64_4,
+ .do_5 = xor_ia64_5,
+};
+
+#define XOR_TRY_TEMPLATES xor_speed(&xor_block_ia64)
