Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
new file mode 100644
index 0000000..7ae1323
--- /dev/null
+++ b/drivers/scsi/ncr53c8xx.c
@@ -0,0 +1,7986 @@
+/******************************************************************************
+** Device driver for the PCI-SCSI NCR538XX controller family.
+**
+** Copyright (C) 1994 Wolfgang Stanglmeier
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+**
+** This driver has been ported to Linux from the FreeBSD NCR53C8XX driver
+** and is currently maintained by
+**
+** Gerard Roudier <groudier@free.fr>
+**
+** Being given that this driver originates from the FreeBSD version, and
+** in order to keep synergy on both, any suggested enhancements and corrections
+** received on Linux are automatically a potential candidate for the FreeBSD
+** version.
+**
+** The original driver has been written for 386bsd and FreeBSD by
+** Wolfgang Stanglmeier <wolf@cologne.de>
+** Stefan Esser <se@mi.Uni-Koeln.de>
+**
+** And has been ported to NetBSD by
+** Charles M. Hannum <mycroft@gnu.ai.mit.edu>
+**
+**-----------------------------------------------------------------------------
+**
+** Brief history
+**
+** December 10 1995 by Gerard Roudier:
+** Initial port to Linux.
+**
+** June 23 1996 by Gerard Roudier:
+** Support for 64 bits architectures (Alpha).
+**
+** November 30 1996 by Gerard Roudier:
+** Support for Fast-20 scsi.
+** Support for large DMA fifo and 128 dwords bursting.
+**
+** February 27 1997 by Gerard Roudier:
+** Support for Fast-40 scsi.
+** Support for on-Board RAM.
+**
+** May 3 1997 by Gerard Roudier:
+** Full support for scsi scripts instructions pre-fetching.
+**
+** May 19 1997 by Richard Waltham <dormouse@farsrobt.demon.co.uk>:
+** Support for NvRAM detection and reading.
+**
+** August 18 1997 by Cort <cort@cs.nmt.edu>:
+** Support for Power/PC (Big Endian).
+**
+** June 20 1998 by Gerard Roudier
+** Support for up to 64 tags per lun.
+** O(1) everywhere (C and SCRIPTS) for normal cases.
+** Low PCI traffic for command handling when on-chip RAM is present.
+** Aggressive SCSI SCRIPTS optimizations.
+**
+*******************************************************************************
+*/
+
+/*
+** Supported SCSI-II features:
+** Synchronous negotiation
+** Wide negotiation (depends on the NCR Chip)
+** Enable disconnection
+** Tagged command queuing
+** Parity checking
+** Etc...
+**
+** Supported NCR/SYMBIOS chips:
+** 53C720 (Wide, Fast SCSI-2, intfly problems)
+*/
+
+/* Name and version of the driver */
+#define SCSI_NCR_DRIVER_NAME "ncr53c8xx-3.4.3g"
+
+#define SCSI_NCR_DEBUG_FLAGS (0)
+
+/*==========================================================
+**
+** Include files
+**
+**==========================================================
+*/
+
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_spi.h>
+
+#include "ncr53c8xx.h"
+
+#define NAME53C "ncr53c"
+#define NAME53C8XX "ncr53c8xx"
+
+#include "sym53c8xx_comm.h"
+
+
+/*==========================================================
+**
+** The CCB done queue uses an array of CCB virtual
+** addresses. Empty entries are flagged using the bogus
+** virtual address 0xffffffff.
+**
+** Since PCI ensures that only aligned DWORDs are accessed
+** atomically, 64 bit little-endian architecture requires
+** to test the high order DWORD of the entry to determine
+** if it is empty or valid.
+**
+** BTW, I will make things differently as soon as I will
+** have a better idea, but this is simple and should work.
+**
+**==========================================================
+*/
+
+#define SCSI_NCR_CCB_DONE_SUPPORT
+#ifdef SCSI_NCR_CCB_DONE_SUPPORT
+
+#define MAX_DONE 24
+#define CCB_DONE_EMPTY 0xffffffffUL
+
+/* All 32 bit architectures */
+#if BITS_PER_LONG == 32
+#define CCB_DONE_VALID(cp) (((u_long) cp) != CCB_DONE_EMPTY)
+
+/* All > 32 bit (64 bit) architectures regardless endian-ness */
+#else
+#define CCB_DONE_VALID(cp) \
+ ((((u_long) cp) & 0xffffffff00000000ul) && \
+ (((u_long) cp) & 0xfffffffful) != CCB_DONE_EMPTY)
+#endif
+
+#endif /* SCSI_NCR_CCB_DONE_SUPPORT */
+
+/*==========================================================
+**
+** Configuration and Debugging
+**
+**==========================================================
+*/
+
+/*
+** SCSI address of this device.
+** The boot routines should have set it.
+** If not, use this.
+*/
+
+#ifndef SCSI_NCR_MYADDR
+#define SCSI_NCR_MYADDR (7)
+#endif
+
+/*
+** The maximum number of tags per logic unit.
+** Used only for disk devices that support tags.
+*/
+
+#ifndef SCSI_NCR_MAX_TAGS
+#define SCSI_NCR_MAX_TAGS (8)
+#endif
+
+/*
+** TAGS are actually limited to 64 tags/lun.
+** We need to deal with power of 2, for alignment constraints.
+*/
+#if SCSI_NCR_MAX_TAGS > 64
+#define MAX_TAGS (64)
+#else
+#define MAX_TAGS SCSI_NCR_MAX_TAGS
+#endif
+
+#define NO_TAG (255)
+
+/*
+** Choose appropriate type for tag bitmap.
+*/
+#if MAX_TAGS > 32
+typedef u64 tagmap_t;
+#else
+typedef u32 tagmap_t;
+#endif
+
+/*
+** Number of targets supported by the driver.
+** n permits target numbers 0..n-1.
+** Default is 16, meaning targets #0..#15.
+** #7 .. is myself.
+*/
+
+#ifdef SCSI_NCR_MAX_TARGET
+#define MAX_TARGET (SCSI_NCR_MAX_TARGET)
+#else
+#define MAX_TARGET (16)
+#endif
+
+/*
+** Number of logic units supported by the driver.
+** n enables logic unit numbers 0..n-1.
+** The common SCSI devices require only
+** one lun, so take 1 as the default.
+*/
+
+#ifdef SCSI_NCR_MAX_LUN
+#define MAX_LUN SCSI_NCR_MAX_LUN
+#else
+#define MAX_LUN (1)
+#endif
+
+/*
+** Asynchronous pre-scaler (ns). Shall be 40
+*/
+
+#ifndef SCSI_NCR_MIN_ASYNC
+#define SCSI_NCR_MIN_ASYNC (40)
+#endif
+
+/*
+** The maximum number of jobs scheduled for starting.
+** There should be one slot per target, and one slot
+** for each tag of each target in use.
+** The calculation below is actually quite silly ...
+*/
+
+#ifdef SCSI_NCR_CAN_QUEUE
+#define MAX_START (SCSI_NCR_CAN_QUEUE + 4)
+#else
+#define MAX_START (MAX_TARGET + 7 * MAX_TAGS)
+#endif
+
+/*
+** We limit the max number of pending IO to 250.
+** since we donnot want to allocate more than 1
+** PAGE for 'scripth'.
+*/
+#if MAX_START > 250
+#undef MAX_START
+#define MAX_START 250
+#endif
+
+/*
+** The maximum number of segments a transfer is split into.
+** We support up to 127 segments for both read and write.
+** The data scripts are broken into 2 sub-scripts.
+** 80 (MAX_SCATTERL) segments are moved from a sub-script
+** in on-chip RAM. This makes data transfers shorter than
+** 80k (assuming 1k fs) as fast as possible.
+*/
+
+#define MAX_SCATTER (SCSI_NCR_MAX_SCATTER)
+
+#if (MAX_SCATTER > 80)
+#define MAX_SCATTERL 80
+#define MAX_SCATTERH (MAX_SCATTER - MAX_SCATTERL)
+#else
+#define MAX_SCATTERL (MAX_SCATTER-1)
+#define MAX_SCATTERH 1
+#endif
+
+/*
+** other
+*/
+
+#define NCR_SNOOP_TIMEOUT (1000000)
+
+/*
+** Other definitions
+*/
+
+#define ScsiResult(host_code, scsi_code) (((host_code) << 16) + ((scsi_code) & 0x7f))
+
+#define initverbose (driver_setup.verbose)
+#define bootverbose (np->verbose)
+
+/*==========================================================
+**
+** Command control block states.
+**
+**==========================================================
+*/
+
+#define HS_IDLE (0)
+#define HS_BUSY (1)
+#define HS_NEGOTIATE (2) /* sync/wide data transfer*/
+#define HS_DISCONNECT (3) /* Disconnected by target */
+
+#define HS_DONEMASK (0x80)
+#define HS_COMPLETE (4|HS_DONEMASK)
+#define HS_SEL_TIMEOUT (5|HS_DONEMASK) /* Selection timeout */
+#define HS_RESET (6|HS_DONEMASK) /* SCSI reset */
+#define HS_ABORTED (7|HS_DONEMASK) /* Transfer aborted */
+#define HS_TIMEOUT (8|HS_DONEMASK) /* Software timeout */
+#define HS_FAIL (9|HS_DONEMASK) /* SCSI or PCI bus errors */
+#define HS_UNEXPECTED (10|HS_DONEMASK)/* Unexpected disconnect */
+
+/*
+** Invalid host status values used by the SCRIPTS processor
+** when the nexus is not fully identified.
+** Shall never appear in a CCB.
+*/
+
+#define HS_INVALMASK (0x40)
+#define HS_SELECTING (0|HS_INVALMASK)
+#define HS_IN_RESELECT (1|HS_INVALMASK)
+#define HS_STARTING (2|HS_INVALMASK)
+
+/*
+** Flags set by the SCRIPT processor for commands
+** that have been skipped.
+*/
+#define HS_SKIPMASK (0x20)
+
+/*==========================================================
+**
+** Software Interrupt Codes
+**
+**==========================================================
+*/
+
+#define SIR_BAD_STATUS (1)
+#define SIR_XXXXXXXXXX (2)
+#define SIR_NEGO_SYNC (3)
+#define SIR_NEGO_WIDE (4)
+#define SIR_NEGO_FAILED (5)
+#define SIR_NEGO_PROTO (6)
+#define SIR_REJECT_RECEIVED (7)
+#define SIR_REJECT_SENT (8)
+#define SIR_IGN_RESIDUE (9)
+#define SIR_MISSING_SAVE (10)
+#define SIR_RESEL_NO_MSG_IN (11)
+#define SIR_RESEL_NO_IDENTIFY (12)
+#define SIR_RESEL_BAD_LUN (13)
+#define SIR_RESEL_BAD_TARGET (14)
+#define SIR_RESEL_BAD_I_T_L (15)
+#define SIR_RESEL_BAD_I_T_L_Q (16)
+#define SIR_DONE_OVERFLOW (17)
+#define SIR_INTFLY (18)
+#define SIR_MAX (18)
+
+/*==========================================================
+**
+** Extended error codes.
+** xerr_status field of struct ccb.
+**
+**==========================================================
+*/
+
+#define XE_OK (0)
+#define XE_EXTRA_DATA (1) /* unexpected data phase */
+#define XE_BAD_PHASE (2) /* illegal phase (4/5) */
+
+/*==========================================================
+**
+** Negotiation status.
+** nego_status field of struct ccb.
+**
+**==========================================================
+*/
+
+#define NS_NOCHANGE (0)
+#define NS_SYNC (1)
+#define NS_WIDE (2)
+#define NS_PPR (4)
+
+/*==========================================================
+**
+** Misc.
+**
+**==========================================================
+*/
+
+#define CCB_MAGIC (0xf2691ad2)
+
+/*==========================================================
+**
+** Declaration of structs.
+**
+**==========================================================
+*/
+
+static struct scsi_transport_template *ncr53c8xx_transport_template = NULL;
+
+struct tcb;
+struct lcb;
+struct ccb;
+struct ncb;
+struct script;
+
+struct link {
+ ncrcmd l_cmd;
+ ncrcmd l_paddr;
+};
+
+struct usrcmd {
+ u_long target;
+ u_long lun;
+ u_long data;
+ u_long cmd;
+};
+
+#define UC_SETSYNC 10
+#define UC_SETTAGS 11
+#define UC_SETDEBUG 12
+#define UC_SETORDER 13
+#define UC_SETWIDE 14
+#define UC_SETFLAG 15
+#define UC_SETVERBOSE 17
+
+#define UF_TRACE (0x01)
+#define UF_NODISC (0x02)
+#define UF_NOSCAN (0x04)
+
+/*========================================================================
+**
+** Declaration of structs: target control block
+**
+**========================================================================
+*/
+struct tcb {
+ /*----------------------------------------------------------------
+ ** During reselection the ncr jumps to this point with SFBR
+ ** set to the encoded target number with bit 7 set.
+ ** if it's not this target, jump to the next.
+ **
+ ** JUMP IF (SFBR != #target#), @(next tcb)
+ **----------------------------------------------------------------
+ */
+ struct link jump_tcb;
+
+ /*----------------------------------------------------------------
+ ** Load the actual values for the sxfer and the scntl3
+ ** register (sync/wide mode).
+ **
+ ** SCR_COPY (1), @(sval field of this tcb), @(sxfer register)
+ ** SCR_COPY (1), @(wval field of this tcb), @(scntl3 register)
+ **----------------------------------------------------------------
+ */
+ ncrcmd getscr[6];
+
+ /*----------------------------------------------------------------
+ ** Get the IDENTIFY message and load the LUN to SFBR.
+ **
+ ** CALL, <RESEL_LUN>
+ **----------------------------------------------------------------
+ */
+ struct link call_lun;
+
+ /*----------------------------------------------------------------
+ ** Now look for the right lun.
+ **
+ ** For i = 0 to 3
+ ** SCR_JUMP ^ IFTRUE(MASK(i, 3)), @(first lcb mod. i)
+ **
+ ** Recent chips will prefetch the 4 JUMPS using only 1 burst.
+ ** It is kind of hashcoding.
+ **----------------------------------------------------------------
+ */
+ struct link jump_lcb[4]; /* JUMPs for reselection */
+ struct lcb * lp[MAX_LUN]; /* The lcb's of this tcb */
+
+ /*----------------------------------------------------------------
+ ** Pointer to the ccb used for negotiation.
+ ** Prevent from starting a negotiation for all queued commands
+ ** when tagged command queuing is enabled.
+ **----------------------------------------------------------------
+ */
+ struct ccb * nego_cp;
+
+ /*----------------------------------------------------------------
+ ** statistical data
+ **----------------------------------------------------------------
+ */
+ u_long transfers;
+ u_long bytes;
+
+ /*----------------------------------------------------------------
+ ** negotiation of wide and synch transfer and device quirks.
+ **----------------------------------------------------------------
+ */
+#ifdef SCSI_NCR_BIG_ENDIAN
+/*0*/ u16 period;
+/*2*/ u_char sval;
+/*3*/ u_char minsync;
+/*0*/ u_char wval;
+/*1*/ u_char widedone;
+/*2*/ u_char quirks;
+/*3*/ u_char maxoffs;
+#else
+/*0*/ u_char minsync;
+/*1*/ u_char sval;
+/*2*/ u16 period;
+/*0*/ u_char maxoffs;
+/*1*/ u_char quirks;
+/*2*/ u_char widedone;
+/*3*/ u_char wval;
+#endif
+
+ /* User settable limits and options. */
+ u_char usrsync;
+ u_char usrwide;
+ u_char usrtags;
+ u_char usrflag;
+ struct scsi_target *starget;
+};
+
+/*========================================================================
+**
+** Declaration of structs: lun control block
+**
+**========================================================================
+*/
+struct lcb {
+ /*----------------------------------------------------------------
+ ** During reselection the ncr jumps to this point
+ ** with SFBR set to the "Identify" message.
+ ** if it's not this lun, jump to the next.
+ **
+ ** JUMP IF (SFBR != #lun#), @(next lcb of this target)
+ **
+ ** It is this lun. Load TEMP with the nexus jumps table
+ ** address and jump to RESEL_TAG (or RESEL_NOTAG).
+ **
+ ** SCR_COPY (4), p_jump_ccb, TEMP,
+ ** SCR_JUMP, <RESEL_TAG>
+ **----------------------------------------------------------------
+ */
+ struct link jump_lcb;
+ ncrcmd load_jump_ccb[3];
+ struct link jump_tag;
+ ncrcmd p_jump_ccb; /* Jump table bus address */
+
+ /*----------------------------------------------------------------
+ ** Jump table used by the script processor to directly jump
+ ** to the CCB corresponding to the reselected nexus.
+ ** Address is allocated on 256 bytes boundary in order to
+ ** allow 8 bit calculation of the tag jump entry for up to
+ ** 64 possible tags.
+ **----------------------------------------------------------------
+ */
+ u32 jump_ccb_0; /* Default table if no tags */
+ u32 *jump_ccb; /* Virtual address */
+
+ /*----------------------------------------------------------------
+ ** CCB queue management.
+ **----------------------------------------------------------------
+ */
+ struct list_head free_ccbq; /* Queue of available CCBs */
+ struct list_head busy_ccbq; /* Queue of busy CCBs */
+ struct list_head wait_ccbq; /* Queue of waiting for IO CCBs */
+ struct list_head skip_ccbq; /* Queue of skipped CCBs */
+ u_char actccbs; /* Number of allocated CCBs */
+ u_char busyccbs; /* CCBs busy for this lun */
+ u_char queuedccbs; /* CCBs queued to the controller*/
+ u_char queuedepth; /* Queue depth for this lun */
+ u_char scdev_depth; /* SCSI device queue depth */
+ u_char maxnxs; /* Max possible nexuses */
+
+ /*----------------------------------------------------------------
+ ** Control of tagged command queuing.
+ ** Tags allocation is performed using a circular buffer.
+ ** This avoids using a loop for tag allocation.
+ **----------------------------------------------------------------
+ */
+ u_char ia_tag; /* Allocation index */
+ u_char if_tag; /* Freeing index */
+ u_char cb_tags[MAX_TAGS]; /* Circular tags buffer */
+ u_char usetags; /* Command queuing is active */
+ u_char maxtags; /* Max nr of tags asked by user */
+ u_char numtags; /* Current number of tags */
+
+ /*----------------------------------------------------------------
+ ** QUEUE FULL control and ORDERED tag control.
+ **----------------------------------------------------------------
+ */
+ /*----------------------------------------------------------------
+ ** QUEUE FULL and ORDERED tag control.
+ **----------------------------------------------------------------
+ */
+ u16 num_good; /* Nr of GOOD since QUEUE FULL */
+ tagmap_t tags_umap; /* Used tags bitmap */
+ tagmap_t tags_smap; /* Tags in use at 'tag_stime' */
+ u_long tags_stime; /* Last time we set smap=umap */
+ struct ccb * held_ccb; /* CCB held for QUEUE FULL */
+};
+
+/*========================================================================
+**
+** Declaration of structs: the launch script.
+**
+**========================================================================
+**
+** It is part of the CCB and is called by the scripts processor to
+** start or restart the data structure (nexus).
+** This 6 DWORDs mini script makes use of prefetching.
+**
+**------------------------------------------------------------------------
+*/
+struct launch {
+ /*----------------------------------------------------------------
+ ** SCR_COPY(4), @(p_phys), @(dsa register)
+ ** SCR_JUMP, @(scheduler_point)
+ **----------------------------------------------------------------
+ */
+ ncrcmd setup_dsa[3]; /* Copy 'phys' address to dsa */
+ struct link schedule; /* Jump to scheduler point */
+ ncrcmd p_phys; /* 'phys' header bus address */
+};
+
+/*========================================================================
+**
+** Declaration of structs: global HEADER.
+**
+**========================================================================
+**
+** This substructure is copied from the ccb to a global address after
+** selection (or reselection) and copied back before disconnect.
+**
+** These fields are accessible to the script processor.
+**
+**------------------------------------------------------------------------
+*/
+
+struct head {
+ /*----------------------------------------------------------------
+ ** Saved data pointer.
+ ** Points to the position in the script responsible for the
+ ** actual transfer transfer of data.
+ ** It's written after reception of a SAVE_DATA_POINTER message.
+ ** The goalpointer points after the last transfer command.
+ **----------------------------------------------------------------
+ */
+ u32 savep;
+ u32 lastp;
+ u32 goalp;
+
+ /*----------------------------------------------------------------
+ ** Alternate data pointer.
+ ** They are copied back to savep/lastp/goalp by the SCRIPTS
+ ** when the direction is unknown and the device claims data out.
+ **----------------------------------------------------------------
+ */
+ u32 wlastp;
+ u32 wgoalp;
+
+ /*----------------------------------------------------------------
+ ** The virtual address of the ccb containing this header.
+ **----------------------------------------------------------------
+ */
+ struct ccb * cp;
+
+ /*----------------------------------------------------------------
+ ** Status fields.
+ **----------------------------------------------------------------
+ */
+ u_char scr_st[4]; /* script status */
+ u_char status[4]; /* host status. must be the */
+ /* last DWORD of the header. */
+};
+
+/*
+** The status bytes are used by the host and the script processor.
+**
+** The byte corresponding to the host_status must be stored in the
+** last DWORD of the CCB header since it is used for command
+** completion (ncr_wakeup()). Doing so, we are sure that the header
+** has been entirely copied back to the CCB when the host_status is
+** seen complete by the CPU.
+**
+** The last four bytes (status[4]) are copied to the scratchb register
+** (declared as scr0..scr3 in ncr_reg.h) just after the select/reselect,
+** and copied back just after disconnecting.
+** Inside the script the XX_REG are used.
+**
+** The first four bytes (scr_st[4]) are used inside the script by
+** "COPY" commands.
+** Because source and destination must have the same alignment
+** in a DWORD, the fields HAVE to be at the choosen offsets.
+** xerr_st 0 (0x34) scratcha
+** sync_st 1 (0x05) sxfer
+** wide_st 3 (0x03) scntl3
+*/
+
+/*
+** Last four bytes (script)
+*/
+#define QU_REG scr0
+#define HS_REG scr1
+#define HS_PRT nc_scr1
+#define SS_REG scr2
+#define SS_PRT nc_scr2
+#define PS_REG scr3
+
+/*
+** Last four bytes (host)
+*/
+#ifdef SCSI_NCR_BIG_ENDIAN
+#define actualquirks phys.header.status[3]
+#define host_status phys.header.status[2]
+#define scsi_status phys.header.status[1]
+#define parity_status phys.header.status[0]
+#else
+#define actualquirks phys.header.status[0]
+#define host_status phys.header.status[1]
+#define scsi_status phys.header.status[2]
+#define parity_status phys.header.status[3]
+#endif
+
+/*
+** First four bytes (script)
+*/
+#define xerr_st header.scr_st[0]
+#define sync_st header.scr_st[1]
+#define nego_st header.scr_st[2]
+#define wide_st header.scr_st[3]
+
+/*
+** First four bytes (host)
+*/
+#define xerr_status phys.xerr_st
+#define nego_status phys.nego_st
+
+#if 0
+#define sync_status phys.sync_st
+#define wide_status phys.wide_st
+#endif
+
+/*==========================================================
+**
+** Declaration of structs: Data structure block
+**
+**==========================================================
+**
+** During execution of a ccb by the script processor,
+** the DSA (data structure address) register points
+** to this substructure of the ccb.
+** This substructure contains the header with
+** the script-processor-changable data and
+** data blocks for the indirect move commands.
+**
+**----------------------------------------------------------
+*/
+
+struct dsb {
+
+ /*
+ ** Header.
+ */
+
+ struct head header;
+
+ /*
+ ** Table data for Script
+ */
+
+ struct scr_tblsel select;
+ struct scr_tblmove smsg ;
+ struct scr_tblmove cmd ;
+ struct scr_tblmove sense ;
+ struct scr_tblmove data[MAX_SCATTER];
+};
+
+
+/*========================================================================
+**
+** Declaration of structs: Command control block.
+**
+**========================================================================
+*/
+struct ccb {
+ /*----------------------------------------------------------------
+ ** This is the data structure which is pointed by the DSA
+ ** register when it is executed by the script processor.
+ ** It must be the first entry because it contains the header
+ ** as first entry that must be cache line aligned.
+ **----------------------------------------------------------------
+ */
+ struct dsb phys;
+
+ /*----------------------------------------------------------------
+ ** Mini-script used at CCB execution start-up.
+ ** Load the DSA with the data structure address (phys) and
+ ** jump to SELECT. Jump to CANCEL if CCB is to be canceled.
+ **----------------------------------------------------------------
+ */
+ struct launch start;
+
+ /*----------------------------------------------------------------
+ ** Mini-script used at CCB relection to restart the nexus.
+ ** Load the DSA with the data structure address (phys) and
+ ** jump to RESEL_DSA. Jump to ABORT if CCB is to be aborted.
+ **----------------------------------------------------------------
+ */
+ struct launch restart;
+
+ /*----------------------------------------------------------------
+ ** If a data transfer phase is terminated too early
+ ** (after reception of a message (i.e. DISCONNECT)),
+ ** we have to prepare a mini script to transfer
+ ** the rest of the data.
+ **----------------------------------------------------------------
+ */
+ ncrcmd patch[8];
+
+ /*----------------------------------------------------------------
+ ** The general SCSI driver provides a
+ ** pointer to a control block.
+ **----------------------------------------------------------------
+ */
+ struct scsi_cmnd *cmd; /* SCSI command */
+ u_char cdb_buf[16]; /* Copy of CDB */
+ u_char sense_buf[64];
+ int data_len; /* Total data length */
+
+ /*----------------------------------------------------------------
+ ** Message areas.
+ ** We prepare a message to be sent after selection.
+ ** We may use a second one if the command is rescheduled
+ ** due to GETCC or QFULL.
+ ** Contents are IDENTIFY and SIMPLE_TAG.
+ ** While negotiating sync or wide transfer,
+ ** a SDTR or WDTR message is appended.
+ **----------------------------------------------------------------
+ */
+ u_char scsi_smsg [8];
+ u_char scsi_smsg2[8];
+
+ /*----------------------------------------------------------------
+ ** Other fields.
+ **----------------------------------------------------------------
+ */
+ u_long p_ccb; /* BUS address of this CCB */
+ u_char sensecmd[6]; /* Sense command */
+ u_char tag; /* Tag for this transfer */
+ /* 255 means no tag */
+ u_char target;
+ u_char lun;
+ u_char queued;
+ u_char auto_sense;
+ struct ccb * link_ccb; /* Host adapter CCB chain */
+ struct list_head link_ccbq; /* Link to unit CCB queue */
+ u32 startp; /* Initial data pointer */
+ u_long magic; /* Free / busy CCB flag */
+};
+
+#define CCB_PHYS(cp,lbl) (cp->p_ccb + offsetof(struct ccb, lbl))
+
+
+/*========================================================================
+**
+** Declaration of structs: NCR device descriptor
+**
+**========================================================================
+*/
+struct ncb {
+ /*----------------------------------------------------------------
+ ** The global header.
+ ** It is accessible to both the host and the script processor.
+ ** Must be cache line size aligned (32 for x86) in order to
+ ** allow cache line bursting when it is copied to/from CCB.
+ **----------------------------------------------------------------
+ */
+ struct head header;
+
+ /*----------------------------------------------------------------
+ ** CCBs management queues.
+ **----------------------------------------------------------------
+ */
+ struct scsi_cmnd *waiting_list; /* Commands waiting for a CCB */
+ /* when lcb is not allocated. */
+ struct scsi_cmnd *done_list; /* Commands waiting for done() */
+ /* callback to be invoked. */
+ spinlock_t smp_lock; /* Lock for SMP threading */
+
+ /*----------------------------------------------------------------
+ ** Chip and controller indentification.
+ **----------------------------------------------------------------
+ */
+ int unit; /* Unit number */
+ char inst_name[16]; /* ncb instance name */
+
+ /*----------------------------------------------------------------
+ ** Initial value of some IO register bits.
+ ** These values are assumed to have been set by BIOS, and may
+ ** be used for probing adapter implementation differences.
+ **----------------------------------------------------------------
+ */
+ u_char sv_scntl0, sv_scntl3, sv_dmode, sv_dcntl, sv_ctest0, sv_ctest3,
+ sv_ctest4, sv_ctest5, sv_gpcntl, sv_stest2, sv_stest4;
+
+ /*----------------------------------------------------------------
+ ** Actual initial value of IO register bits used by the
+ ** driver. They are loaded at initialisation according to
+ ** features that are to be enabled.
+ **----------------------------------------------------------------
+ */
+ u_char rv_scntl0, rv_scntl3, rv_dmode, rv_dcntl, rv_ctest0, rv_ctest3,
+ rv_ctest4, rv_ctest5, rv_stest2;
+
+ /*----------------------------------------------------------------
+ ** Targets management.
+ ** During reselection the ncr jumps to jump_tcb.
+ ** The SFBR register is loaded with the encoded target id.
+ ** For i = 0 to 3
+ ** SCR_JUMP ^ IFTRUE(MASK(i, 3)), @(next tcb mod. i)
+ **
+ ** Recent chips will prefetch the 4 JUMPS using only 1 burst.
+ ** It is kind of hashcoding.
+ **----------------------------------------------------------------
+ */
+ struct link jump_tcb[4]; /* JUMPs for reselection */
+ struct tcb target[MAX_TARGET]; /* Target data */
+
+ /*----------------------------------------------------------------
+ ** Virtual and physical bus addresses of the chip.
+ **----------------------------------------------------------------
+ */
+ void __iomem *vaddr; /* Virtual and bus address of */
+ unsigned long paddr; /* chip's IO registers. */
+ unsigned long paddr2; /* On-chip RAM bus address. */
+ volatile /* Pointer to volatile for */
+ struct ncr_reg __iomem *reg; /* memory mapped IO. */
+
+ /*----------------------------------------------------------------
+ ** SCRIPTS virtual and physical bus addresses.
+ ** 'script' is loaded in the on-chip RAM if present.
+ ** 'scripth' stays in main memory.
+ **----------------------------------------------------------------
+ */
+ struct script *script0; /* Copies of script and scripth */
+ struct scripth *scripth0; /* relocated for this ncb. */
+ struct scripth *scripth; /* Actual scripth virt. address */
+ u_long p_script; /* Actual script and scripth */
+ u_long p_scripth; /* bus addresses. */
+
+ /*----------------------------------------------------------------
+ ** General controller parameters and configuration.
+ **----------------------------------------------------------------
+ */
+ struct device *dev;
+ u_char revision_id; /* PCI device revision id */
+ u32 irq; /* IRQ level */
+ u32 features; /* Chip features map */
+ u_char myaddr; /* SCSI id of the adapter */
+ u_char maxburst; /* log base 2 of dwords burst */
+ u_char maxwide; /* Maximum transfer width */
+ u_char minsync; /* Minimum sync period factor */
+ u_char maxsync; /* Maximum sync period factor */
+ u_char maxoffs; /* Max scsi offset */
+ u_char multiplier; /* Clock multiplier (1,2,4) */
+ u_char clock_divn; /* Number of clock divisors */
+ u_long clock_khz; /* SCSI clock frequency in KHz */
+
+ /*----------------------------------------------------------------
+ ** Start queue management.
+ ** It is filled up by the host processor and accessed by the
+ ** SCRIPTS processor in order to start SCSI commands.
+ **----------------------------------------------------------------
+ */
+ u16 squeueput; /* Next free slot of the queue */
+ u16 actccbs; /* Number of allocated CCBs */
+ u16 queuedccbs; /* Number of CCBs in start queue*/
+ u16 queuedepth; /* Start queue depth */
+
+ /*----------------------------------------------------------------
+ ** Timeout handler.
+ **----------------------------------------------------------------
+ */
+ struct timer_list timer; /* Timer handler link header */
+ u_long lasttime;
+ u_long settle_time; /* Resetting the SCSI BUS */
+
+ /*----------------------------------------------------------------
+ ** Debugging and profiling.
+ **----------------------------------------------------------------
+ */
+ struct ncr_reg regdump; /* Register dump */
+ u_long regtime; /* Time it has been done */
+
+ /*----------------------------------------------------------------
+ ** Miscellaneous buffers accessed by the scripts-processor.
+ ** They shall be DWORD aligned, because they may be read or
+ ** written with a SCR_COPY script command.
+ **----------------------------------------------------------------
+ */
+ u_char msgout[8]; /* Buffer for MESSAGE OUT */
+ u_char msgin [8]; /* Buffer for MESSAGE IN */
+ u32 lastmsg; /* Last SCSI message sent */
+ u_char scratch; /* Scratch for SCSI receive */
+
+ /*----------------------------------------------------------------
+ ** Miscellaneous configuration and status parameters.
+ **----------------------------------------------------------------
+ */
+ u_char disc; /* Diconnection allowed */
+ u_char scsi_mode; /* Current SCSI BUS mode */
+ u_char order; /* Tag order to use */
+ u_char verbose; /* Verbosity for this controller*/
+ int ncr_cache; /* Used for cache test at init. */
+ u_long p_ncb; /* BUS address of this NCB */
+
+ /*----------------------------------------------------------------
+ ** Command completion handling.
+ **----------------------------------------------------------------
+ */
+#ifdef SCSI_NCR_CCB_DONE_SUPPORT
+ struct ccb *(ccb_done[MAX_DONE]);
+ int ccb_done_ic;
+#endif
+ /*----------------------------------------------------------------
+ ** Fields that should be removed or changed.
+ **----------------------------------------------------------------
+ */
+ struct ccb *ccb; /* Global CCB */
+ struct usrcmd user; /* Command from user */
+ volatile u_char release_stage; /* Synchronisation stage on release */
+};
+
+#define NCB_SCRIPT_PHYS(np,lbl) (np->p_script + offsetof (struct script, lbl))
+#define NCB_SCRIPTH_PHYS(np,lbl) (np->p_scripth + offsetof (struct scripth,lbl))
+
+/*==========================================================
+**
+**
+** Script for NCR-Processor.
+**
+** Use ncr_script_fill() to create the variable parts.
+** Use ncr_script_copy_and_bind() to make a copy and
+** bind to physical addresses.
+**
+**
+**==========================================================
+**
+** We have to know the offsets of all labels before
+** we reach them (for forward jumps).
+** Therefore we declare a struct here.
+** If you make changes inside the script,
+** DONT FORGET TO CHANGE THE LENGTHS HERE!
+**
+**----------------------------------------------------------
+*/
+
+/*
+** For HP Zalon/53c720 systems, the Zalon interface
+** between CPU and 53c720 does prefetches, which causes
+** problems with self modifying scripts. The problem
+** is overcome by calling a dummy subroutine after each
+** modification, to force a refetch of the script on
+** return from the subroutine.
+*/
+
+#ifdef CONFIG_NCR53C8XX_PREFETCH
+#define PREFETCH_FLUSH_CNT 2
+#define PREFETCH_FLUSH SCR_CALL, PADDRH (wait_dma),
+#else
+#define PREFETCH_FLUSH_CNT 0
+#define PREFETCH_FLUSH
+#endif
+
+/*
+** Script fragments which are loaded into the on-chip RAM
+** of 825A, 875 and 895 chips.
+*/
+struct script {
+ ncrcmd start [ 5];
+ ncrcmd startpos [ 1];
+ ncrcmd select [ 6];
+ ncrcmd select2 [ 9 + PREFETCH_FLUSH_CNT];
+ ncrcmd loadpos [ 4];
+ ncrcmd send_ident [ 9];
+ ncrcmd prepare [ 6];
+ ncrcmd prepare2 [ 7];
+ ncrcmd command [ 6];
+ ncrcmd dispatch [ 32];
+ ncrcmd clrack [ 4];
+ ncrcmd no_data [ 17];
+ ncrcmd status [ 8];
+ ncrcmd msg_in [ 2];
+ ncrcmd msg_in2 [ 16];
+ ncrcmd msg_bad [ 4];
+ ncrcmd setmsg [ 7];
+ ncrcmd cleanup [ 6];
+ ncrcmd complete [ 9];
+ ncrcmd cleanup_ok [ 8 + PREFETCH_FLUSH_CNT];
+ ncrcmd cleanup0 [ 1];
+#ifndef SCSI_NCR_CCB_DONE_SUPPORT
+ ncrcmd signal [ 12];
+#else
+ ncrcmd signal [ 9];
+ ncrcmd done_pos [ 1];
+ ncrcmd done_plug [ 2];
+ ncrcmd done_end [ 7];
+#endif
+ ncrcmd save_dp [ 7];
+ ncrcmd restore_dp [ 5];
+ ncrcmd disconnect [ 10];
+ ncrcmd msg_out [ 9];
+ ncrcmd msg_out_done [ 7];
+ ncrcmd idle [ 2];
+ ncrcmd reselect [ 8];
+ ncrcmd reselected [ 8];
+ ncrcmd resel_dsa [ 6 + PREFETCH_FLUSH_CNT];
+ ncrcmd loadpos1 [ 4];
+ ncrcmd resel_lun [ 6];
+ ncrcmd resel_tag [ 6];
+ ncrcmd jump_to_nexus [ 4 + PREFETCH_FLUSH_CNT];
+ ncrcmd nexus_indirect [ 4];
+ ncrcmd resel_notag [ 4];
+ ncrcmd data_in [MAX_SCATTERL * 4];
+ ncrcmd data_in2 [ 4];
+ ncrcmd data_out [MAX_SCATTERL * 4];
+ ncrcmd data_out2 [ 4];
+};
+
+/*
+** Script fragments which stay in main memory for all chips.
+*/
+struct scripth {
+ ncrcmd tryloop [MAX_START*2];
+ ncrcmd tryloop2 [ 2];
+#ifdef SCSI_NCR_CCB_DONE_SUPPORT
+ ncrcmd done_queue [MAX_DONE*5];
+ ncrcmd done_queue2 [ 2];
+#endif
+ ncrcmd select_no_atn [ 8];
+ ncrcmd cancel [ 4];
+ ncrcmd skip [ 9 + PREFETCH_FLUSH_CNT];
+ ncrcmd skip2 [ 19];
+ ncrcmd par_err_data_in [ 6];
+ ncrcmd par_err_other [ 4];
+ ncrcmd msg_reject [ 8];
+ ncrcmd msg_ign_residue [ 24];
+ ncrcmd msg_extended [ 10];
+ ncrcmd msg_ext_2 [ 10];
+ ncrcmd msg_wdtr [ 14];
+ ncrcmd send_wdtr [ 7];
+ ncrcmd msg_ext_3 [ 10];
+ ncrcmd msg_sdtr [ 14];
+ ncrcmd send_sdtr [ 7];
+ ncrcmd nego_bad_phase [ 4];
+ ncrcmd msg_out_abort [ 10];
+ ncrcmd hdata_in [MAX_SCATTERH * 4];
+ ncrcmd hdata_in2 [ 2];
+ ncrcmd hdata_out [MAX_SCATTERH * 4];
+ ncrcmd hdata_out2 [ 2];
+ ncrcmd reset [ 4];
+ ncrcmd aborttag [ 4];
+ ncrcmd abort [ 2];
+ ncrcmd abort_resel [ 20];
+ ncrcmd resend_ident [ 4];
+ ncrcmd clratn_go_on [ 3];
+ ncrcmd nxtdsp_go_on [ 1];
+ ncrcmd sdata_in [ 8];
+ ncrcmd data_io [ 18];
+ ncrcmd bad_identify [ 12];
+ ncrcmd bad_i_t_l [ 4];
+ ncrcmd bad_i_t_l_q [ 4];
+ ncrcmd bad_target [ 8];
+ ncrcmd bad_status [ 8];
+ ncrcmd start_ram [ 4 + PREFETCH_FLUSH_CNT];
+ ncrcmd start_ram0 [ 4];
+ ncrcmd sto_restart [ 5];
+ ncrcmd wait_dma [ 2];
+ ncrcmd snooptest [ 9];
+ ncrcmd snoopend [ 2];
+};
+
+/*==========================================================
+**
+**
+** Function headers.
+**
+**
+**==========================================================
+*/
+
+static void ncr_alloc_ccb (struct ncb *np, u_char tn, u_char ln);
+static void ncr_complete (struct ncb *np, struct ccb *cp);
+static void ncr_exception (struct ncb *np);
+static void ncr_free_ccb (struct ncb *np, struct ccb *cp);
+static void ncr_init_ccb (struct ncb *np, struct ccb *cp);
+static void ncr_init_tcb (struct ncb *np, u_char tn);
+static struct lcb * ncr_alloc_lcb (struct ncb *np, u_char tn, u_char ln);
+static struct lcb * ncr_setup_lcb (struct ncb *np, struct scsi_device *sdev);
+static void ncr_getclock (struct ncb *np, int mult);
+static void ncr_selectclock (struct ncb *np, u_char scntl3);
+static struct ccb *ncr_get_ccb (struct ncb *np, struct scsi_cmnd *cmd);
+static void ncr_chip_reset (struct ncb *np, int delay);
+static void ncr_init (struct ncb *np, int reset, char * msg, u_long code);
+static int ncr_int_sbmc (struct ncb *np);
+static int ncr_int_par (struct ncb *np);
+static void ncr_int_ma (struct ncb *np);
+static void ncr_int_sir (struct ncb *np);
+static void ncr_int_sto (struct ncb *np);
+static void ncr_negotiate (struct ncb* np, struct tcb* tp);
+static int ncr_prepare_nego(struct ncb *np, struct ccb *cp, u_char *msgptr);
+
+static void ncr_script_copy_and_bind
+ (struct ncb *np, ncrcmd *src, ncrcmd *dst, int len);
+static void ncr_script_fill (struct script * scr, struct scripth * scripth);
+static int ncr_scatter (struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd);
+static void ncr_getsync (struct ncb *np, u_char sfac, u_char *fakp, u_char *scntl3p);
+static void ncr_setsync (struct ncb *np, struct ccb *cp, u_char scntl3, u_char sxfer);
+static void ncr_setup_tags (struct ncb *np, struct scsi_device *sdev);
+static void ncr_setwide (struct ncb *np, struct ccb *cp, u_char wide, u_char ack);
+static int ncr_snooptest (struct ncb *np);
+static void ncr_timeout (struct ncb *np);
+static void ncr_wakeup (struct ncb *np, u_long code);
+static void ncr_wakeup_done (struct ncb *np);
+static void ncr_start_next_ccb (struct ncb *np, struct lcb * lp, int maxn);
+static void ncr_put_start_queue(struct ncb *np, struct ccb *cp);
+
+static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd);
+static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd);
+static void process_waiting_list(struct ncb *np, int sts);
+
+#define remove_from_waiting_list(np, cmd) \
+ retrieve_from_waiting_list(1, (np), (cmd))
+#define requeue_waiting_list(np) process_waiting_list((np), DID_OK)
+#define reset_waiting_list(np) process_waiting_list((np), DID_RESET)
+
+static inline char *ncr_name (struct ncb *np)
+{
+ return np->inst_name;
+}
+
+
+/*==========================================================
+**
+**
+** Scripts for NCR-Processor.
+**
+** Use ncr_script_bind for binding to physical addresses.
+**
+**
+**==========================================================
+**
+** NADDR generates a reference to a field of the controller data.
+** PADDR generates a reference to another part of the script.
+** RADDR generates a reference to a script processor register.
+** FADDR generates a reference to a script processor register
+** with offset.
+**
+**----------------------------------------------------------
+*/
+
+#define RELOC_SOFTC 0x40000000
+#define RELOC_LABEL 0x50000000
+#define RELOC_REGISTER 0x60000000
+#if 0
+#define RELOC_KVAR 0x70000000
+#endif
+#define RELOC_LABELH 0x80000000
+#define RELOC_MASK 0xf0000000
+
+#define NADDR(label) (RELOC_SOFTC | offsetof(struct ncb, label))
+#define PADDR(label) (RELOC_LABEL | offsetof(struct script, label))
+#define PADDRH(label) (RELOC_LABELH | offsetof(struct scripth, label))
+#define RADDR(label) (RELOC_REGISTER | REG(label))
+#define FADDR(label,ofs)(RELOC_REGISTER | ((REG(label))+(ofs)))
+#if 0
+#define KVAR(which) (RELOC_KVAR | (which))
+#endif
+
+#if 0
+#define SCRIPT_KVAR_JIFFIES (0)
+#define SCRIPT_KVAR_FIRST SCRIPT_KVAR_JIFFIES
+#define SCRIPT_KVAR_LAST SCRIPT_KVAR_JIFFIES
+/*
+ * Kernel variables referenced in the scripts.
+ * THESE MUST ALL BE ALIGNED TO A 4-BYTE BOUNDARY.
+ */
+static void *script_kvars[] __initdata =
+ { (void *)&jiffies };
+#endif
+
+static struct script script0 __initdata = {
+/*--------------------------< START >-----------------------*/ {
+ /*
+ ** This NOP will be patched with LED ON
+ ** SCR_REG_REG (gpreg, SCR_AND, 0xfe)
+ */
+ SCR_NO_OP,
+ 0,
+ /*
+ ** Clear SIGP.
+ */
+ SCR_FROM_REG (ctest2),
+ 0,
+ /*
+ ** Then jump to a certain point in tryloop.
+ ** Due to the lack of indirect addressing the code
+ ** is self modifying here.
+ */
+ SCR_JUMP,
+}/*-------------------------< STARTPOS >--------------------*/,{
+ PADDRH(tryloop),
+
+}/*-------------------------< SELECT >----------------------*/,{
+ /*
+ ** DSA contains the address of a scheduled
+ ** data structure.
+ **
+ ** SCRATCHA contains the address of the script,
+ ** which starts the next entry.
+ **
+ ** Set Initiator mode.
+ **
+ ** (Target mode is left as an exercise for the reader)
+ */
+
+ SCR_CLR (SCR_TRG),
+ 0,
+ SCR_LOAD_REG (HS_REG, HS_SELECTING),
+ 0,
+
+ /*
+ ** And try to select this target.
+ */
+ SCR_SEL_TBL_ATN ^ offsetof (struct dsb, select),
+ PADDR (reselect),
+
+}/*-------------------------< SELECT2 >----------------------*/,{
+ /*
+ ** Now there are 4 possibilities:
+ **
+ ** (1) The ncr loses arbitration.
+ ** This is ok, because it will try again,
+ ** when the bus becomes idle.
+ ** (But beware of the timeout function!)
+ **
+ ** (2) The ncr is reselected.
+ ** Then the script processor takes the jump
+ ** to the RESELECT label.
+ **
+ ** (3) The ncr wins arbitration.
+ ** Then it will execute SCRIPTS instruction until
+ ** the next instruction that checks SCSI phase.
+ ** Then will stop and wait for selection to be
+ ** complete or selection time-out to occur.
+ ** As a result the SCRIPTS instructions until
+ ** LOADPOS + 2 should be executed in parallel with
+ ** the SCSI core performing selection.
+ */
+
+ /*
+ ** The M_REJECT problem seems to be due to a selection
+ ** timing problem.
+ ** Wait immediately for the selection to complete.
+ ** (2.5x behaves so)
+ */
+ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_OUT)),
+ 0,
+
+ /*
+ ** Next time use the next slot.
+ */
+ SCR_COPY (4),
+ RADDR (temp),
+ PADDR (startpos),
+ /*
+ ** The ncr doesn't have an indirect load
+ ** or store command. So we have to
+ ** copy part of the control block to a
+ ** fixed place, where we can access it.
+ **
+ ** We patch the address part of a
+ ** COPY command with the DSA-register.
+ */
+ SCR_COPY_F (4),
+ RADDR (dsa),
+ PADDR (loadpos),
+ /*
+ ** Flush script prefetch if required
+ */
+ PREFETCH_FLUSH
+ /*
+ ** then we do the actual copy.
+ */
+ SCR_COPY (sizeof (struct head)),
+ /*
+ ** continued after the next label ...
+ */
+}/*-------------------------< LOADPOS >---------------------*/,{
+ 0,
+ NADDR (header),
+ /*
+ ** Wait for the next phase or the selection
+ ** to complete or time-out.
+ */
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)),
+ PADDR (prepare),
+
+}/*-------------------------< SEND_IDENT >----------------------*/,{
+ /*
+ ** Selection complete.
+ ** Send the IDENTIFY and SIMPLE_TAG messages
+ ** (and the M_X_SYNC_REQ message)
+ */
+ SCR_MOVE_TBL ^ SCR_MSG_OUT,
+ offsetof (struct dsb, smsg),
+ SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)),
+ PADDRH (resend_ident),
+ SCR_LOAD_REG (scratcha, 0x80),
+ 0,
+ SCR_COPY (1),
+ RADDR (scratcha),
+ NADDR (lastmsg),
+}/*-------------------------< PREPARE >----------------------*/,{
+ /*
+ ** load the savep (saved pointer) into
+ ** the TEMP register (actual pointer)
+ */
+ SCR_COPY (4),
+ NADDR (header.savep),
+ RADDR (temp),
+ /*
+ ** Initialize the status registers
+ */
+ SCR_COPY (4),
+ NADDR (header.status),
+ RADDR (scr0),
+}/*-------------------------< PREPARE2 >---------------------*/,{
+ /*
+ ** Initialize the msgout buffer with a NOOP message.
+ */
+ SCR_LOAD_REG (scratcha, M_NOOP),
+ 0,
+ SCR_COPY (1),
+ RADDR (scratcha),
+ NADDR (msgout),
+#if 0
+ SCR_COPY (1),
+ RADDR (scratcha),
+ NADDR (msgin),
+#endif
+ /*
+ ** Anticipate the COMMAND phase.
+ ** This is the normal case for initial selection.
+ */
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_COMMAND)),
+ PADDR (dispatch),
+
+}/*-------------------------< COMMAND >--------------------*/,{
+ /*
+ ** ... and send the command
+ */
+ SCR_MOVE_TBL ^ SCR_COMMAND,
+ offsetof (struct dsb, cmd),
+ /*
+ ** If status is still HS_NEGOTIATE, negotiation failed.
+ ** We check this here, since we want to do that
+ ** only once.
+ */
+ SCR_FROM_REG (HS_REG),
+ 0,
+ SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)),
+ SIR_NEGO_FAILED,
+
+}/*-----------------------< DISPATCH >----------------------*/,{
+ /*
+ ** MSG_IN is the only phase that shall be
+ ** entered at least once for each (re)selection.
+ ** So we test it first.
+ */
+ SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)),
+ PADDR (msg_in),
+
+ SCR_RETURN ^ IFTRUE (IF (SCR_DATA_OUT)),
+ 0,
+ /*
+ ** DEL 397 - 53C875 Rev 3 - Part Number 609-0392410 - ITEM 4.
+ ** Possible data corruption during Memory Write and Invalidate.
+ ** This work-around resets the addressing logic prior to the
+ ** start of the first MOVE of a DATA IN phase.
+ ** (See Documentation/scsi/ncr53c8xx.txt for more information)
+ */
+ SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)),
+ 20,
+ SCR_COPY (4),
+ RADDR (scratcha),
+ RADDR (scratcha),
+ SCR_RETURN,
+ 0,
+ SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)),
+ PADDR (status),
+ SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)),
+ PADDR (command),
+ SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)),
+ PADDR (msg_out),
+ /*
+ ** Discard one illegal phase byte, if required.
+ */
+ SCR_LOAD_REG (scratcha, XE_BAD_PHASE),
+ 0,
+ SCR_COPY (1),
+ RADDR (scratcha),
+ NADDR (xerr_st),
+ SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_OUT)),
+ 8,
+ SCR_MOVE_ABS (1) ^ SCR_ILG_OUT,
+ NADDR (scratch),
+ SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_IN)),
+ 8,
+ SCR_MOVE_ABS (1) ^ SCR_ILG_IN,
+ NADDR (scratch),
+ SCR_JUMP,
+ PADDR (dispatch),
+
+}/*-------------------------< CLRACK >----------------------*/,{
+ /*
+ ** Terminate possible pending message phase.
+ */
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP,
+ PADDR (dispatch),
+
+}/*-------------------------< NO_DATA >--------------------*/,{
+ /*
+ ** The target wants to tranfer too much data
+ ** or in the wrong direction.
+ ** Remember that in extended error.
+ */
+ SCR_LOAD_REG (scratcha, XE_EXTRA_DATA),
+ 0,
+ SCR_COPY (1),
+ RADDR (scratcha),
+ NADDR (xerr_st),
+ /*
+ ** Discard one data byte, if required.
+ */
+ SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)),
+ 8,
+ SCR_MOVE_ABS (1) ^ SCR_DATA_OUT,
+ NADDR (scratch),
+ SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)),
+ 8,
+ SCR_MOVE_ABS (1) ^ SCR_DATA_IN,
+ NADDR (scratch),
+ /*
+ ** .. and repeat as required.
+ */
+ SCR_CALL,
+ PADDR (dispatch),
+ SCR_JUMP,
+ PADDR (no_data),
+
+}/*-------------------------< STATUS >--------------------*/,{
+ /*
+ ** get the status
+ */
+ SCR_MOVE_ABS (1) ^ SCR_STATUS,
+ NADDR (scratch),
+ /*
+ ** save status to scsi_status.
+ ** mark as complete.
+ */
+ SCR_TO_REG (SS_REG),
+ 0,
+ SCR_LOAD_REG (HS_REG, HS_COMPLETE),
+ 0,
+ SCR_JUMP,
+ PADDR (dispatch),
+}/*-------------------------< MSG_IN >--------------------*/,{
+ /*
+ ** Get the first byte of the message
+ ** and save it to SCRATCHA.
+ **
+ ** The script processor doesn't negate the
+ ** ACK signal after this transfer.
+ */
+ SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
+ NADDR (msgin[0]),
+}/*-------------------------< MSG_IN2 >--------------------*/,{
+ /*
+ ** Handle this message.
+ */
+ SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE)),
+ PADDR (complete),
+ SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT)),
+ PADDR (disconnect),
+ SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP)),
+ PADDR (save_dp),
+ SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP)),
+ PADDR (restore_dp),
+ SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED)),
+ PADDRH (msg_extended),
+ SCR_JUMP ^ IFTRUE (DATA (M_NOOP)),
+ PADDR (clrack),
+ SCR_JUMP ^ IFTRUE (DATA (M_REJECT)),
+ PADDRH (msg_reject),
+ SCR_JUMP ^ IFTRUE (DATA (M_IGN_RESIDUE)),
+ PADDRH (msg_ign_residue),
+ /*
+ ** Rest of the messages left as
+ ** an exercise ...
+ **
+ ** Unimplemented messages:
+ ** fall through to MSG_BAD.
+ */
+}/*-------------------------< MSG_BAD >------------------*/,{
+ /*
+ ** unimplemented message - reject it.
+ */
+ SCR_INT,
+ SIR_REJECT_SENT,
+ SCR_LOAD_REG (scratcha, M_REJECT),
+ 0,
+}/*-------------------------< SETMSG >----------------------*/,{
+ SCR_COPY (1),
+ RADDR (scratcha),
+ NADDR (msgout),
+ SCR_SET (SCR_ATN),
+ 0,
+ SCR_JUMP,
+ PADDR (clrack),
+}/*-------------------------< CLEANUP >-------------------*/,{
+ /*
+ ** dsa: Pointer to ccb
+ ** or xxxxxxFF (no ccb)
+ **
+ ** HS_REG: Host-Status (<>0!)
+ */
+ SCR_FROM_REG (dsa),
+ 0,
+ SCR_JUMP ^ IFTRUE (DATA (0xff)),
+ PADDR (start),
+ /*
+ ** dsa is valid.
+ ** complete the cleanup.
+ */
+ SCR_JUMP,
+ PADDR (cleanup_ok),
+
+}/*-------------------------< COMPLETE >-----------------*/,{
+ /*
+ ** Complete message.
+ **
+ ** Copy TEMP register to LASTP in header.
+ */
+ SCR_COPY (4),
+ RADDR (temp),
+ NADDR (header.lastp),
+ /*
+ ** When we terminate the cycle by clearing ACK,
+ ** the target may disconnect immediately.
+ **
+ ** We don't want to be told of an
+ ** "unexpected disconnect",
+ ** so we disable this feature.
+ */
+ SCR_REG_REG (scntl2, SCR_AND, 0x7f),
+ 0,
+ /*
+ ** Terminate cycle ...
+ */
+ SCR_CLR (SCR_ACK|SCR_ATN),
+ 0,
+ /*
+ ** ... and wait for the disconnect.
+ */
+ SCR_WAIT_DISC,
+ 0,
+}/*-------------------------< CLEANUP_OK >----------------*/,{
+ /*
+ ** Save host status to header.
+ */
+ SCR_COPY (4),
+ RADDR (scr0),
+ NADDR (header.status),
+ /*
+ ** and copy back the header to the ccb.
+ */
+ SCR_COPY_F (4),
+ RADDR (dsa),
+ PADDR (cleanup0),
+ /*
+ ** Flush script prefetch if required
+ */
+ PREFETCH_FLUSH
+ SCR_COPY (sizeof (struct head)),
+ NADDR (header),
+}/*-------------------------< CLEANUP0 >--------------------*/,{
+ 0,
+}/*-------------------------< SIGNAL >----------------------*/,{
+ /*
+ ** if job not completed ...
+ */
+ SCR_FROM_REG (HS_REG),
+ 0,
+ /*
+ ** ... start the next command.
+ */
+ SCR_JUMP ^ IFTRUE (MASK (0, (HS_DONEMASK|HS_SKIPMASK))),
+ PADDR(start),
+ /*
+ ** If command resulted in not GOOD status,
+ ** call the C code if needed.
+ */
+ SCR_FROM_REG (SS_REG),
+ 0,
+ SCR_CALL ^ IFFALSE (DATA (S_GOOD)),
+ PADDRH (bad_status),
+
+#ifndef SCSI_NCR_CCB_DONE_SUPPORT
+
+ /*
+ ** ... signal completion to the host
+ */
+ SCR_INT,
+ SIR_INTFLY,
+ /*
+ ** Auf zu neuen Schandtaten!
+ */
+ SCR_JUMP,
+ PADDR(start),
+
+#else /* defined SCSI_NCR_CCB_DONE_SUPPORT */
+
+ /*
+ ** ... signal completion to the host
+ */
+ SCR_JUMP,
+}/*------------------------< DONE_POS >---------------------*/,{
+ PADDRH (done_queue),
+}/*------------------------< DONE_PLUG >--------------------*/,{
+ SCR_INT,
+ SIR_DONE_OVERFLOW,
+}/*------------------------< DONE_END >---------------------*/,{
+ SCR_INT,
+ SIR_INTFLY,
+ SCR_COPY (4),
+ RADDR (temp),
+ PADDR (done_pos),
+ SCR_JUMP,
+ PADDR (start),
+
+#endif /* SCSI_NCR_CCB_DONE_SUPPORT */
+
+}/*-------------------------< SAVE_DP >------------------*/,{
+ /*
+ ** SAVE_DP message:
+ ** Copy TEMP register to SAVEP in header.
+ */
+ SCR_COPY (4),
+ RADDR (temp),
+ NADDR (header.savep),
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP,
+ PADDR (dispatch),
+}/*-------------------------< RESTORE_DP >---------------*/,{
+ /*
+ ** RESTORE_DP message:
+ ** Copy SAVEP in header to TEMP register.
+ */
+ SCR_COPY (4),
+ NADDR (header.savep),
+ RADDR (temp),
+ SCR_JUMP,
+ PADDR (clrack),
+
+}/*-------------------------< DISCONNECT >---------------*/,{
+ /*
+ ** DISCONNECTing ...
+ **
+ ** disable the "unexpected disconnect" feature,
+ ** and remove the ACK signal.
+ */
+ SCR_REG_REG (scntl2, SCR_AND, 0x7f),
+ 0,
+ SCR_CLR (SCR_ACK|SCR_ATN),
+ 0,
+ /*
+ ** Wait for the disconnect.
+ */
+ SCR_WAIT_DISC,
+ 0,
+ /*
+ ** Status is: DISCONNECTED.
+ */
+ SCR_LOAD_REG (HS_REG, HS_DISCONNECT),
+ 0,
+ SCR_JUMP,
+ PADDR (cleanup_ok),
+
+}/*-------------------------< MSG_OUT >-------------------*/,{
+ /*
+ ** The target requests a message.
+ */
+ SCR_MOVE_ABS (1) ^ SCR_MSG_OUT,
+ NADDR (msgout),
+ SCR_COPY (1),
+ NADDR (msgout),
+ NADDR (lastmsg),
+ /*
+ ** If it was no ABORT message ...
+ */
+ SCR_JUMP ^ IFTRUE (DATA (M_ABORT)),
+ PADDRH (msg_out_abort),
+ /*
+ ** ... wait for the next phase
+ ** if it's a message out, send it again, ...
+ */
+ SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)),
+ PADDR (msg_out),
+}/*-------------------------< MSG_OUT_DONE >--------------*/,{
+ /*
+ ** ... else clear the message ...
+ */
+ SCR_LOAD_REG (scratcha, M_NOOP),
+ 0,
+ SCR_COPY (4),
+ RADDR (scratcha),
+ NADDR (msgout),
+ /*
+ ** ... and process the next phase
+ */
+ SCR_JUMP,
+ PADDR (dispatch),
+}/*-------------------------< IDLE >------------------------*/,{
+ /*
+ ** Nothing to do?
+ ** Wait for reselect.
+ ** This NOP will be patched with LED OFF
+ ** SCR_REG_REG (gpreg, SCR_OR, 0x01)
+ */
+ SCR_NO_OP,
+ 0,
+}/*-------------------------< RESELECT >--------------------*/,{
+ /*
+ ** make the DSA invalid.
+ */
+ SCR_LOAD_REG (dsa, 0xff),
+ 0,
+ SCR_CLR (SCR_TRG),
+ 0,
+ SCR_LOAD_REG (HS_REG, HS_IN_RESELECT),
+ 0,
+ /*
+ ** Sleep waiting for a reselection.
+ ** If SIGP is set, special treatment.
+ **
+ ** Zu allem bereit ..
+ */
+ SCR_WAIT_RESEL,
+ PADDR(start),
+}/*-------------------------< RESELECTED >------------------*/,{
+ /*
+ ** This NOP will be patched with LED ON
+ ** SCR_REG_REG (gpreg, SCR_AND, 0xfe)
+ */
+ SCR_NO_OP,
+ 0,
+ /*
+ ** ... zu nichts zu gebrauchen ?
+ **
+ ** load the target id into the SFBR
+ ** and jump to the control block.
+ **
+ ** Look at the declarations of
+ ** - struct ncb
+ ** - struct tcb
+ ** - struct lcb
+ ** - struct ccb
+ ** to understand what's going on.
+ */
+ SCR_REG_SFBR (ssid, SCR_AND, 0x8F),
+ 0,
+ SCR_TO_REG (sdid),
+ 0,
+ SCR_JUMP,
+ NADDR (jump_tcb),
+
+}/*-------------------------< RESEL_DSA >-------------------*/,{
+ /*
+ ** Ack the IDENTIFY or TAG previously received.
+ */
+ SCR_CLR (SCR_ACK),
+ 0,
+ /*
+ ** The ncr doesn't have an indirect load
+ ** or store command. So we have to
+ ** copy part of the control block to a
+ ** fixed place, where we can access it.
+ **
+ ** We patch the address part of a
+ ** COPY command with the DSA-register.
+ */
+ SCR_COPY_F (4),
+ RADDR (dsa),
+ PADDR (loadpos1),
+ /*
+ ** Flush script prefetch if required
+ */
+ PREFETCH_FLUSH
+ /*
+ ** then we do the actual copy.
+ */
+ SCR_COPY (sizeof (struct head)),
+ /*
+ ** continued after the next label ...
+ */
+
+}/*-------------------------< LOADPOS1 >-------------------*/,{
+ 0,
+ NADDR (header),
+ /*
+ ** The DSA contains the data structure address.
+ */
+ SCR_JUMP,
+ PADDR (prepare),
+
+}/*-------------------------< RESEL_LUN >-------------------*/,{
+ /*
+ ** come back to this point
+ ** to get an IDENTIFY message
+ ** Wait for a msg_in phase.
+ */
+ SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)),
+ SIR_RESEL_NO_MSG_IN,
+ /*
+ ** message phase.
+ ** Read the data directly from the BUS DATA lines.
+ ** This helps to support very old SCSI devices that
+ ** may reselect without sending an IDENTIFY.
+ */
+ SCR_FROM_REG (sbdl),
+ 0,
+ /*
+ ** It should be an Identify message.
+ */
+ SCR_RETURN,
+ 0,
+}/*-------------------------< RESEL_TAG >-------------------*/,{
+ /*
+ ** Read IDENTIFY + SIMPLE + TAG using a single MOVE.
+ ** Agressive optimization, is'nt it?
+ ** No need to test the SIMPLE TAG message, since the
+ ** driver only supports conformant devices for tags. ;-)
+ */
+ SCR_MOVE_ABS (3) ^ SCR_MSG_IN,
+ NADDR (msgin),
+ /*
+ ** Read the TAG from the SIDL.
+ ** Still an aggressive optimization. ;-)
+ ** Compute the CCB indirect jump address which
+ ** is (#TAG*2 & 0xfc) due to tag numbering using
+ ** 1,3,5..MAXTAGS*2+1 actual values.
+ */
+ SCR_REG_SFBR (sidl, SCR_SHL, 0),
+ 0,
+ SCR_SFBR_REG (temp, SCR_AND, 0xfc),
+ 0,
+}/*-------------------------< JUMP_TO_NEXUS >-------------------*/,{
+ SCR_COPY_F (4),
+ RADDR (temp),
+ PADDR (nexus_indirect),
+ /*
+ ** Flush script prefetch if required
+ */
+ PREFETCH_FLUSH
+ SCR_COPY (4),
+}/*-------------------------< NEXUS_INDIRECT >-------------------*/,{
+ 0,
+ RADDR (temp),
+ SCR_RETURN,
+ 0,
+}/*-------------------------< RESEL_NOTAG >-------------------*/,{
+ /*
+ ** No tag expected.
+ ** Read an throw away the IDENTIFY.
+ */
+ SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
+ NADDR (msgin),
+ SCR_JUMP,
+ PADDR (jump_to_nexus),
+}/*-------------------------< DATA_IN >--------------------*/,{
+/*
+** Because the size depends on the
+** #define MAX_SCATTERL parameter,
+** it is filled in at runtime.
+**
+** ##===========< i=0; i<MAX_SCATTERL >=========
+** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)),
+** || PADDR (dispatch),
+** || SCR_MOVE_TBL ^ SCR_DATA_IN,
+** || offsetof (struct dsb, data[ i]),
+** ##==========================================
+**
+**---------------------------------------------------------
+*/
+0
+}/*-------------------------< DATA_IN2 >-------------------*/,{
+ SCR_CALL,
+ PADDR (dispatch),
+ SCR_JUMP,
+ PADDR (no_data),
+}/*-------------------------< DATA_OUT >--------------------*/,{
+/*
+** Because the size depends on the
+** #define MAX_SCATTERL parameter,
+** it is filled in at runtime.
+**
+** ##===========< i=0; i<MAX_SCATTERL >=========
+** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)),
+** || PADDR (dispatch),
+** || SCR_MOVE_TBL ^ SCR_DATA_OUT,
+** || offsetof (struct dsb, data[ i]),
+** ##==========================================
+**
+**---------------------------------------------------------
+*/
+0
+}/*-------------------------< DATA_OUT2 >-------------------*/,{
+ SCR_CALL,
+ PADDR (dispatch),
+ SCR_JUMP,
+ PADDR (no_data),
+}/*--------------------------------------------------------*/
+};
+
+static struct scripth scripth0 __initdata = {
+/*-------------------------< TRYLOOP >---------------------*/{
+/*
+** Start the next entry.
+** Called addresses point to the launch script in the CCB.
+** They are patched by the main processor.
+**
+** Because the size depends on the
+** #define MAX_START parameter, it is filled
+** in at runtime.
+**
+**-----------------------------------------------------------
+**
+** ##===========< I=0; i<MAX_START >===========
+** || SCR_CALL,
+** || PADDR (idle),
+** ##==========================================
+**
+**-----------------------------------------------------------
+*/
+0
+}/*------------------------< TRYLOOP2 >---------------------*/,{
+ SCR_JUMP,
+ PADDRH(tryloop),
+
+#ifdef SCSI_NCR_CCB_DONE_SUPPORT
+
+}/*------------------------< DONE_QUEUE >-------------------*/,{
+/*
+** Copy the CCB address to the next done entry.
+** Because the size depends on the
+** #define MAX_DONE parameter, it is filled
+** in at runtime.
+**
+**-----------------------------------------------------------
+**
+** ##===========< I=0; i<MAX_DONE >===========
+** || SCR_COPY (sizeof(struct ccb *),
+** || NADDR (header.cp),
+** || NADDR (ccb_done[i]),
+** || SCR_CALL,
+** || PADDR (done_end),
+** ##==========================================
+**
+**-----------------------------------------------------------
+*/
+0
+}/*------------------------< DONE_QUEUE2 >------------------*/,{
+ SCR_JUMP,
+ PADDRH (done_queue),
+
+#endif /* SCSI_NCR_CCB_DONE_SUPPORT */
+}/*------------------------< SELECT_NO_ATN >-----------------*/,{
+ /*
+ ** Set Initiator mode.
+ ** And try to select this target without ATN.
+ */
+
+ SCR_CLR (SCR_TRG),
+ 0,
+ SCR_LOAD_REG (HS_REG, HS_SELECTING),
+ 0,
+ SCR_SEL_TBL ^ offsetof (struct dsb, select),
+ PADDR (reselect),
+ SCR_JUMP,
+ PADDR (select2),
+
+}/*-------------------------< CANCEL >------------------------*/,{
+
+ SCR_LOAD_REG (scratcha, HS_ABORTED),
+ 0,
+ SCR_JUMPR,
+ 8,
+}/*-------------------------< SKIP >------------------------*/,{
+ SCR_LOAD_REG (scratcha, 0),
+ 0,
+ /*
+ ** This entry has been canceled.
+ ** Next time use the next slot.
+ */
+ SCR_COPY (4),
+ RADDR (temp),
+ PADDR (startpos),
+ /*
+ ** The ncr doesn't have an indirect load
+ ** or store command. So we have to
+ ** copy part of the control block to a
+ ** fixed place, where we can access it.
+ **
+ ** We patch the address part of a
+ ** COPY command with the DSA-register.
+ */
+ SCR_COPY_F (4),
+ RADDR (dsa),
+ PADDRH (skip2),
+ /*
+ ** Flush script prefetch if required
+ */
+ PREFETCH_FLUSH
+ /*
+ ** then we do the actual copy.
+ */
+ SCR_COPY (sizeof (struct head)),
+ /*
+ ** continued after the next label ...
+ */
+}/*-------------------------< SKIP2 >---------------------*/,{
+ 0,
+ NADDR (header),
+ /*
+ ** Initialize the status registers
+ */
+ SCR_COPY (4),
+ NADDR (header.status),
+ RADDR (scr0),
+ /*
+ ** Force host status.
+ */
+ SCR_FROM_REG (scratcha),
+ 0,
+ SCR_JUMPR ^ IFFALSE (MASK (0, HS_DONEMASK)),
+ 16,
+ SCR_REG_REG (HS_REG, SCR_OR, HS_SKIPMASK),
+ 0,
+ SCR_JUMPR,
+ 8,
+ SCR_TO_REG (HS_REG),
+ 0,
+ SCR_LOAD_REG (SS_REG, S_GOOD),
+ 0,
+ SCR_JUMP,
+ PADDR (cleanup_ok),
+
+},/*-------------------------< PAR_ERR_DATA_IN >---------------*/{
+ /*
+ ** Ignore all data in byte, until next phase
+ */
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)),
+ PADDRH (par_err_other),
+ SCR_MOVE_ABS (1) ^ SCR_DATA_IN,
+ NADDR (scratch),
+ SCR_JUMPR,
+ -24,
+},/*-------------------------< PAR_ERR_OTHER >------------------*/{
+ /*
+ ** count it.
+ */
+ SCR_REG_REG (PS_REG, SCR_ADD, 0x01),
+ 0,
+ /*
+ ** jump to dispatcher.
+ */
+ SCR_JUMP,
+ PADDR (dispatch),
+}/*-------------------------< MSG_REJECT >---------------*/,{
+ /*
+ ** If a negotiation was in progress,
+ ** negotiation failed.
+ ** Otherwise, let the C code print
+ ** some message.
+ */
+ SCR_FROM_REG (HS_REG),
+ 0,
+ SCR_INT ^ IFFALSE (DATA (HS_NEGOTIATE)),
+ SIR_REJECT_RECEIVED,
+ SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)),
+ SIR_NEGO_FAILED,
+ SCR_JUMP,
+ PADDR (clrack),
+
+}/*-------------------------< MSG_IGN_RESIDUE >----------*/,{
+ /*
+ ** Terminate cycle
+ */
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
+ PADDR (dispatch),
+ /*
+ ** get residue size.
+ */
+ SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
+ NADDR (msgin[1]),
+ /*
+ ** Size is 0 .. ignore message.
+ */
+ SCR_JUMP ^ IFTRUE (DATA (0)),
+ PADDR (clrack),
+ /*
+ ** Size is not 1 .. have to interrupt.
+ */
+ SCR_JUMPR ^ IFFALSE (DATA (1)),
+ 40,
+ /*
+ ** Check for residue byte in swide register
+ */
+ SCR_FROM_REG (scntl2),
+ 0,
+ SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)),
+ 16,
+ /*
+ ** There IS data in the swide register.
+ ** Discard it.
+ */
+ SCR_REG_REG (scntl2, SCR_OR, WSR),
+ 0,
+ SCR_JUMP,
+ PADDR (clrack),
+ /*
+ ** Load again the size to the sfbr register.
+ */
+ SCR_FROM_REG (scratcha),
+ 0,
+ SCR_INT,
+ SIR_IGN_RESIDUE,
+ SCR_JUMP,
+ PADDR (clrack),
+
+}/*-------------------------< MSG_EXTENDED >-------------*/,{
+ /*
+ ** Terminate cycle
+ */
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
+ PADDR (dispatch),
+ /*
+ ** get length.
+ */
+ SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
+ NADDR (msgin[1]),
+ /*
+ */
+ SCR_JUMP ^ IFTRUE (DATA (3)),
+ PADDRH (msg_ext_3),
+ SCR_JUMP ^ IFFALSE (DATA (2)),
+ PADDR (msg_bad),
+}/*-------------------------< MSG_EXT_2 >----------------*/,{
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
+ PADDR (dispatch),
+ /*
+ ** get extended message code.
+ */
+ SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
+ NADDR (msgin[2]),
+ SCR_JUMP ^ IFTRUE (DATA (M_X_WIDE_REQ)),
+ PADDRH (msg_wdtr),
+ /*
+ ** unknown extended message
+ */
+ SCR_JUMP,
+ PADDR (msg_bad)
+}/*-------------------------< MSG_WDTR >-----------------*/,{
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
+ PADDR (dispatch),
+ /*
+ ** get data bus width
+ */
+ SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
+ NADDR (msgin[3]),
+ /*
+ ** let the host do the real work.
+ */
+ SCR_INT,
+ SIR_NEGO_WIDE,
+ /*
+ ** let the target fetch our answer.
+ */
+ SCR_SET (SCR_ATN),
+ 0,
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)),
+ PADDRH (nego_bad_phase),
+
+}/*-------------------------< SEND_WDTR >----------------*/,{
+ /*
+ ** Send the M_X_WIDE_REQ
+ */
+ SCR_MOVE_ABS (4) ^ SCR_MSG_OUT,
+ NADDR (msgout),
+ SCR_COPY (1),
+ NADDR (msgout),
+ NADDR (lastmsg),
+ SCR_JUMP,
+ PADDR (msg_out_done),
+
+}/*-------------------------< MSG_EXT_3 >----------------*/,{
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
+ PADDR (dispatch),
+ /*
+ ** get extended message code.
+ */
+ SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
+ NADDR (msgin[2]),
+ SCR_JUMP ^ IFTRUE (DATA (M_X_SYNC_REQ)),
+ PADDRH (msg_sdtr),
+ /*
+ ** unknown extended message
+ */
+ SCR_JUMP,
+ PADDR (msg_bad)
+
+}/*-------------------------< MSG_SDTR >-----------------*/,{
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
+ PADDR (dispatch),
+ /*
+ ** get period and offset
+ */
+ SCR_MOVE_ABS (2) ^ SCR_MSG_IN,
+ NADDR (msgin[3]),
+ /*
+ ** let the host do the real work.
+ */
+ SCR_INT,
+ SIR_NEGO_SYNC,
+ /*
+ ** let the target fetch our answer.
+ */
+ SCR_SET (SCR_ATN),
+ 0,
+ SCR_CLR (SCR_ACK),
+ 0,
+ SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)),
+ PADDRH (nego_bad_phase),
+
+}/*-------------------------< SEND_SDTR >-------------*/,{
+ /*
+ ** Send the M_X_SYNC_REQ
+ */
+ SCR_MOVE_ABS (5) ^ SCR_MSG_OUT,
+ NADDR (msgout),
+ SCR_COPY (1),
+ NADDR (msgout),
+ NADDR (lastmsg),
+ SCR_JUMP,
+ PADDR (msg_out_done),
+
+}/*-------------------------< NEGO_BAD_PHASE >------------*/,{
+ SCR_INT,
+ SIR_NEGO_PROTO,
+ SCR_JUMP,
+ PADDR (dispatch),
+
+}/*-------------------------< MSG_OUT_ABORT >-------------*/,{
+ /*
+ ** After ABORT message,
+ **
+ ** expect an immediate disconnect, ...
+ */
+ SCR_REG_REG (scntl2, SCR_AND, 0x7f),
+ 0,
+ SCR_CLR (SCR_ACK|SCR_ATN),
+ 0,
+ SCR_WAIT_DISC,
+ 0,
+ /*
+ ** ... and set the status to "ABORTED"
+ */
+ SCR_LOAD_REG (HS_REG, HS_ABORTED),
+ 0,
+ SCR_JUMP,
+ PADDR (cleanup),
+
+}/*-------------------------< HDATA_IN >-------------------*/,{
+/*
+** Because the size depends on the
+** #define MAX_SCATTERH parameter,
+** it is filled in at runtime.
+**
+** ##==< i=MAX_SCATTERL; i<MAX_SCATTERL+MAX_SCATTERH >==
+** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)),
+** || PADDR (dispatch),
+** || SCR_MOVE_TBL ^ SCR_DATA_IN,
+** || offsetof (struct dsb, data[ i]),
+** ##===================================================
+**
+**---------------------------------------------------------
+*/
+0
+}/*-------------------------< HDATA_IN2 >------------------*/,{
+ SCR_JUMP,
+ PADDR (data_in),
+
+}/*-------------------------< HDATA_OUT >-------------------*/,{
+/*
+** Because the size depends on the
+** #define MAX_SCATTERH parameter,
+** it is filled in at runtime.
+**
+** ##==< i=MAX_SCATTERL; i<MAX_SCATTERL+MAX_SCATTERH >==
+** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)),
+** || PADDR (dispatch),
+** || SCR_MOVE_TBL ^ SCR_DATA_OUT,
+** || offsetof (struct dsb, data[ i]),
+** ##===================================================
+**
+**---------------------------------------------------------
+*/
+0
+}/*-------------------------< HDATA_OUT2 >------------------*/,{
+ SCR_JUMP,
+ PADDR (data_out),
+
+}/*-------------------------< RESET >----------------------*/,{
+ /*
+ ** Send a M_RESET message if bad IDENTIFY
+ ** received on reselection.
+ */
+ SCR_LOAD_REG (scratcha, M_ABORT_TAG),
+ 0,
+ SCR_JUMP,
+ PADDRH (abort_resel),
+}/*-------------------------< ABORTTAG >-------------------*/,{
+ /*
+ ** Abort a wrong tag received on reselection.
+ */
+ SCR_LOAD_REG (scratcha, M_ABORT_TAG),
+ 0,
+ SCR_JUMP,
+ PADDRH (abort_resel),
+}/*-------------------------< ABORT >----------------------*/,{
+ /*
+ ** Abort a reselection when no active CCB.
+ */
+ SCR_LOAD_REG (scratcha, M_ABORT),
+ 0,
+}/*-------------------------< ABORT_RESEL >----------------*/,{
+ SCR_COPY (1),
+ RADDR (scratcha),
+ NADDR (msgout),
+ SCR_SET (SCR_ATN),
+ 0,
+ SCR_CLR (SCR_ACK),
+ 0,
+ /*
+ ** and send it.
+ ** we expect an immediate disconnect
+ */
+ SCR_REG_REG (scntl2, SCR_AND, 0x7f),
+ 0,
+ SCR_MOVE_ABS (1) ^ SCR_MSG_OUT,
+ NADDR (msgout),
+ SCR_COPY (1),
+ NADDR (msgout),
+ NADDR (lastmsg),
+ SCR_CLR (SCR_ACK|SCR_ATN),
+ 0,
+ SCR_WAIT_DISC,
+ 0,
+ SCR_JUMP,
+ PADDR (start),
+}/*-------------------------< RESEND_IDENT >-------------------*/,{
+ /*
+ ** The target stays in MSG OUT phase after having acked
+ ** Identify [+ Tag [+ Extended message ]]. Targets shall
+ ** behave this way on parity error.
+ ** We must send it again all the messages.
+ */
+ SCR_SET (SCR_ATN), /* Shall be asserted 2 deskew delays before the */
+ 0, /* 1rst ACK = 90 ns. Hope the NCR is'nt too fast */
+ SCR_JUMP,
+ PADDR (send_ident),
+}/*-------------------------< CLRATN_GO_ON >-------------------*/,{
+ SCR_CLR (SCR_ATN),
+ 0,
+ SCR_JUMP,
+}/*-------------------------< NXTDSP_GO_ON >-------------------*/,{
+ 0,
+}/*-------------------------< SDATA_IN >-------------------*/,{
+ SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)),
+ PADDR (dispatch),
+ SCR_MOVE_TBL ^ SCR_DATA_IN,
+ offsetof (struct dsb, sense),
+ SCR_CALL,
+ PADDR (dispatch),
+ SCR_JUMP,
+ PADDR (no_data),
+}/*-------------------------< DATA_IO >--------------------*/,{
+ /*
+ ** We jump here if the data direction was unknown at the
+ ** time we had to queue the command to the scripts processor.
+ ** Pointers had been set as follow in this situation:
+ ** savep --> DATA_IO
+ ** lastp --> start pointer when DATA_IN
+ ** goalp --> goal pointer when DATA_IN
+ ** wlastp --> start pointer when DATA_OUT
+ ** wgoalp --> goal pointer when DATA_OUT
+ ** This script sets savep/lastp/goalp according to the
+ ** direction chosen by the target.
+ */
+ SCR_JUMPR ^ IFTRUE (WHEN (SCR_DATA_OUT)),
+ 32,
+ /*
+ ** Direction is DATA IN.
+ ** Warning: we jump here, even when phase is DATA OUT.
+ */
+ SCR_COPY (4),
+ NADDR (header.lastp),
+ NADDR (header.savep),
+
+ /*
+ ** Jump to the SCRIPTS according to actual direction.
+ */
+ SCR_COPY (4),
+ NADDR (header.savep),
+ RADDR (temp),
+ SCR_RETURN,
+ 0,
+ /*
+ ** Direction is DATA OUT.
+ */
+ SCR_COPY (4),
+ NADDR (header.wlastp),
+ NADDR (header.lastp),
+ SCR_COPY (4),
+ NADDR (header.wgoalp),
+ NADDR (header.goalp),
+ SCR_JUMPR,
+ -64,
+}/*-------------------------< BAD_IDENTIFY >---------------*/,{
+ /*
+ ** If message phase but not an IDENTIFY,
+ ** get some help from the C code.
+ ** Old SCSI device may behave so.
+ */
+ SCR_JUMPR ^ IFTRUE (MASK (0x80, 0x80)),
+ 16,
+ SCR_INT,
+ SIR_RESEL_NO_IDENTIFY,
+ SCR_JUMP,
+ PADDRH (reset),
+ /*
+ ** Message is an IDENTIFY, but lun is unknown.
+ ** Read the message, since we got it directly
+ ** from the SCSI BUS data lines.
+ ** Signal problem to C code for logging the event.
+ ** Send a M_ABORT to clear all pending tasks.
+ */
+ SCR_INT,
+ SIR_RESEL_BAD_LUN,
+ SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
+ NADDR (msgin),
+ SCR_JUMP,
+ PADDRH (abort),
+}/*-------------------------< BAD_I_T_L >------------------*/,{
+ /*
+ ** We donnot have a task for that I_T_L.
+ ** Signal problem to C code for logging the event.
+ ** Send a M_ABORT message.
+ */
+ SCR_INT,
+ SIR_RESEL_BAD_I_T_L,
+ SCR_JUMP,
+ PADDRH (abort),
+}/*-------------------------< BAD_I_T_L_Q >----------------*/,{
+ /*
+ ** We donnot have a task that matches the tag.
+ ** Signal problem to C code for logging the event.
+ ** Send a M_ABORTTAG message.
+ */
+ SCR_INT,
+ SIR_RESEL_BAD_I_T_L_Q,
+ SCR_JUMP,
+ PADDRH (aborttag),
+}/*-------------------------< BAD_TARGET >-----------------*/,{
+ /*
+ ** We donnot know the target that reselected us.
+ ** Grab the first message if any (IDENTIFY).
+ ** Signal problem to C code for logging the event.
+ ** M_RESET message.
+ */
+ SCR_INT,
+ SIR_RESEL_BAD_TARGET,
+ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)),
+ 8,
+ SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
+ NADDR (msgin),
+ SCR_JUMP,
+ PADDRH (reset),
+}/*-------------------------< BAD_STATUS >-----------------*/,{
+ /*
+ ** If command resulted in either QUEUE FULL,
+ ** CHECK CONDITION or COMMAND TERMINATED,
+ ** call the C code.
+ */
+ SCR_INT ^ IFTRUE (DATA (S_QUEUE_FULL)),
+ SIR_BAD_STATUS,
+ SCR_INT ^ IFTRUE (DATA (S_CHECK_COND)),
+ SIR_BAD_STATUS,
+ SCR_INT ^ IFTRUE (DATA (S_TERMINATED)),
+ SIR_BAD_STATUS,
+ SCR_RETURN,
+ 0,
+}/*-------------------------< START_RAM >-------------------*/,{
+ /*
+ ** Load the script into on-chip RAM,
+ ** and jump to start point.
+ */
+ SCR_COPY_F (4),
+ RADDR (scratcha),
+ PADDRH (start_ram0),
+ /*
+ ** Flush script prefetch if required
+ */
+ PREFETCH_FLUSH
+ SCR_COPY (sizeof (struct script)),
+}/*-------------------------< START_RAM0 >--------------------*/,{
+ 0,
+ PADDR (start),
+ SCR_JUMP,
+ PADDR (start),
+}/*-------------------------< STO_RESTART >-------------------*/,{
+ /*
+ **
+ ** Repair start queue (e.g. next time use the next slot)
+ ** and jump to start point.
+ */
+ SCR_COPY (4),
+ RADDR (temp),
+ PADDR (startpos),
+ SCR_JUMP,
+ PADDR (start),
+}/*-------------------------< WAIT_DMA >-------------------*/,{
+ /*
+ ** For HP Zalon/53c720 systems, the Zalon interface
+ ** between CPU and 53c720 does prefetches, which causes
+ ** problems with self modifying scripts. The problem
+ ** is overcome by calling a dummy subroutine after each
+ ** modification, to force a refetch of the script on
+ ** return from the subroutine.
+ */
+ SCR_RETURN,
+ 0,
+}/*-------------------------< SNOOPTEST >-------------------*/,{
+ /*
+ ** Read the variable.
+ */
+ SCR_COPY (4),
+ NADDR(ncr_cache),
+ RADDR (scratcha),
+ /*
+ ** Write the variable.
+ */
+ SCR_COPY (4),
+ RADDR (temp),
+ NADDR(ncr_cache),
+ /*
+ ** Read back the variable.
+ */
+ SCR_COPY (4),
+ NADDR(ncr_cache),
+ RADDR (temp),
+}/*-------------------------< SNOOPEND >-------------------*/,{
+ /*
+ ** And stop.
+ */
+ SCR_INT,
+ 99,
+}/*--------------------------------------------------------*/
+};
+
+/*==========================================================
+**
+**
+** Fill in #define dependent parts of the script
+**
+**
+**==========================================================
+*/
+
+void __init ncr_script_fill (struct script * scr, struct scripth * scrh)
+{
+ int i;
+ ncrcmd *p;
+
+ p = scrh->tryloop;
+ for (i=0; i<MAX_START; i++) {
+ *p++ =SCR_CALL;
+ *p++ =PADDR (idle);
+ }
+
+ BUG_ON((u_long)p != (u_long)&scrh->tryloop + sizeof (scrh->tryloop));
+
+#ifdef SCSI_NCR_CCB_DONE_SUPPORT
+
+ p = scrh->done_queue;
+ for (i = 0; i<MAX_DONE; i++) {
+ *p++ =SCR_COPY (sizeof(struct ccb *));
+ *p++ =NADDR (header.cp);
+ *p++ =NADDR (ccb_done[i]);
+ *p++ =SCR_CALL;
+ *p++ =PADDR (done_end);
+ }
+
+ BUG_ON((u_long)p != (u_long)&scrh->done_queue+sizeof(scrh->done_queue));
+
+#endif /* SCSI_NCR_CCB_DONE_SUPPORT */
+
+ p = scrh->hdata_in;
+ for (i=0; i<MAX_SCATTERH; i++) {
+ *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN));
+ *p++ =PADDR (dispatch);
+ *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN;
+ *p++ =offsetof (struct dsb, data[i]);
+ }
+
+ BUG_ON((u_long)p != (u_long)&scrh->hdata_in + sizeof (scrh->hdata_in));
+
+ p = scr->data_in;
+ for (i=MAX_SCATTERH; i<MAX_SCATTERH+MAX_SCATTERL; i++) {
+ *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN));
+ *p++ =PADDR (dispatch);
+ *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN;
+ *p++ =offsetof (struct dsb, data[i]);
+ }
+
+ BUG_ON((u_long)p != (u_long)&scr->data_in + sizeof (scr->data_in));
+
+ p = scrh->hdata_out;
+ for (i=0; i<MAX_SCATTERH; i++) {
+ *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT));
+ *p++ =PADDR (dispatch);
+ *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT;
+ *p++ =offsetof (struct dsb, data[i]);
+ }
+
+ BUG_ON((u_long)p != (u_long)&scrh->hdata_out + sizeof (scrh->hdata_out));
+
+ p = scr->data_out;
+ for (i=MAX_SCATTERH; i<MAX_SCATTERH+MAX_SCATTERL; i++) {
+ *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT));
+ *p++ =PADDR (dispatch);
+ *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT;
+ *p++ =offsetof (struct dsb, data[i]);
+ }
+
+ BUG_ON((u_long) p != (u_long)&scr->data_out + sizeof (scr->data_out));
+}
+
+/*==========================================================
+**
+**
+** Copy and rebind a script.
+**
+**
+**==========================================================
+*/
+
+static void __init
+ncr_script_copy_and_bind (struct ncb *np, ncrcmd *src, ncrcmd *dst, int len)
+{
+ ncrcmd opcode, new, old, tmp1, tmp2;
+ ncrcmd *start, *end;
+ int relocs;
+ int opchanged = 0;
+
+ start = src;
+ end = src + len/4;
+
+ while (src < end) {
+
+ opcode = *src++;
+ *dst++ = cpu_to_scr(opcode);
+
+ /*
+ ** If we forget to change the length
+ ** in struct script, a field will be
+ ** padded with 0. This is an illegal
+ ** command.
+ */
+
+ if (opcode == 0) {
+ printk (KERN_ERR "%s: ERROR0 IN SCRIPT at %d.\n",
+ ncr_name(np), (int) (src-start-1));
+ mdelay(1000);
+ }
+
+ if (DEBUG_FLAGS & DEBUG_SCRIPT)
+ printk (KERN_DEBUG "%p: <%x>\n",
+ (src-1), (unsigned)opcode);
+
+ /*
+ ** We don't have to decode ALL commands
+ */
+ switch (opcode >> 28) {
+
+ case 0xc:
+ /*
+ ** COPY has TWO arguments.
+ */
+ relocs = 2;
+ tmp1 = src[0];
+#ifdef RELOC_KVAR
+ if ((tmp1 & RELOC_MASK) == RELOC_KVAR)
+ tmp1 = 0;
+#endif
+ tmp2 = src[1];
+#ifdef RELOC_KVAR
+ if ((tmp2 & RELOC_MASK) == RELOC_KVAR)
+ tmp2 = 0;
+#endif
+ if ((tmp1 ^ tmp2) & 3) {
+ printk (KERN_ERR"%s: ERROR1 IN SCRIPT at %d.\n",
+ ncr_name(np), (int) (src-start-1));
+ mdelay(1000);
+ }
+ /*
+ ** If PREFETCH feature not enabled, remove
+ ** the NO FLUSH bit if present.
+ */
+ if ((opcode & SCR_NO_FLUSH) && !(np->features & FE_PFEN)) {
+ dst[-1] = cpu_to_scr(opcode & ~SCR_NO_FLUSH);
+ ++opchanged;
+ }
+ break;
+
+ case 0x0:
+ /*
+ ** MOVE (absolute address)
+ */
+ relocs = 1;
+ break;
+
+ case 0x8:
+ /*
+ ** JUMP / CALL
+ ** don't relocate if relative :-)
+ */
+ if (opcode & 0x00800000)
+ relocs = 0;
+ else
+ relocs = 1;
+ break;
+
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ relocs = 1;
+ break;
+
+ default:
+ relocs = 0;
+ break;
+ }
+
+ if (relocs) {
+ while (relocs--) {
+ old = *src++;
+
+ switch (old & RELOC_MASK) {
+ case RELOC_REGISTER:
+ new = (old & ~RELOC_MASK) + np->paddr;
+ break;
+ case RELOC_LABEL:
+ new = (old & ~RELOC_MASK) + np->p_script;
+ break;
+ case RELOC_LABELH:
+ new = (old & ~RELOC_MASK) + np->p_scripth;
+ break;
+ case RELOC_SOFTC:
+ new = (old & ~RELOC_MASK) + np->p_ncb;
+ break;
+#ifdef RELOC_KVAR
+ case RELOC_KVAR:
+ if (((old & ~RELOC_MASK) <
+ SCRIPT_KVAR_FIRST) ||
+ ((old & ~RELOC_MASK) >
+ SCRIPT_KVAR_LAST))
+ panic("ncr KVAR out of range");
+ new = vtophys(script_kvars[old &
+ ~RELOC_MASK]);
+ break;
+#endif
+ case 0:
+ /* Don't relocate a 0 address. */
+ if (old == 0) {
+ new = old;
+ break;
+ }
+ /* fall through */
+ default:
+ panic("ncr_script_copy_and_bind: weird relocation %x\n", old);
+ break;
+ }
+
+ *dst++ = cpu_to_scr(new);
+ }
+ } else
+ *dst++ = cpu_to_scr(*src++);
+
+ }
+}
+
+/*
+** Linux host data structure
+*/
+
+struct host_data {
+ struct ncb *ncb;
+};
+
+#define PRINT_ADDR(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg)
+
+static void ncr_print_msg(struct ccb *cp, char *label, u_char *msg)
+{
+ int i;
+ PRINT_ADDR(cp->cmd, "%s: ", label);
+
+ printk ("%x",*msg);
+ if (*msg == M_EXTENDED) {
+ for (i = 1; i < 8; i++) {
+ if (i - 1 > msg[1])
+ break;
+ printk ("-%x",msg[i]);
+ }
+ } else if ((*msg & 0xf0) == 0x20) {
+ printk ("-%x",msg[1]);
+ }
+
+ printk(".\n");
+}
+
+/*==========================================================
+**
+** NCR chip clock divisor table.
+** Divisors are multiplied by 10,000,000 in order to make
+** calculations more simple.
+**
+**==========================================================
+*/
+
+#define _5M 5000000
+static u_long div_10M[] =
+ {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M};
+
+
+/*===============================================================
+**
+** Prepare io register values used by ncr_init() according
+** to selected and supported features.
+**
+** NCR chips allow burst lengths of 2, 4, 8, 16, 32, 64, 128
+** transfers. 32,64,128 are only supported by 875 and 895 chips.
+** We use log base 2 (burst length) as internal code, with
+** value 0 meaning "burst disabled".
+**
+**===============================================================
+*/
+
+/*
+ * Burst length from burst code.
+ */
+#define burst_length(bc) (!(bc))? 0 : 1 << (bc)
+
+/*
+ * Burst code from io register bits. Burst enable is ctest0 for c720
+ */
+#define burst_code(dmode, ctest0) \
+ (ctest0) & 0x80 ? 0 : (((dmode) & 0xc0) >> 6) + 1
+
+/*
+ * Set initial io register bits from burst code.
+ */
+static inline void ncr_init_burst(struct ncb *np, u_char bc)
+{
+ u_char *be = &np->rv_ctest0;
+ *be &= ~0x80;
+ np->rv_dmode &= ~(0x3 << 6);
+ np->rv_ctest5 &= ~0x4;
+
+ if (!bc) {
+ *be |= 0x80;
+ } else {
+ --bc;
+ np->rv_dmode |= ((bc & 0x3) << 6);
+ np->rv_ctest5 |= (bc & 0x4);
+ }
+}
+
+static void __init ncr_prepare_setting(struct ncb *np)
+{
+ u_char burst_max;
+ u_long period;
+ int i;
+
+ /*
+ ** Save assumed BIOS setting
+ */
+
+ np->sv_scntl0 = INB(nc_scntl0) & 0x0a;
+ np->sv_scntl3 = INB(nc_scntl3) & 0x07;
+ np->sv_dmode = INB(nc_dmode) & 0xce;
+ np->sv_dcntl = INB(nc_dcntl) & 0xa8;
+ np->sv_ctest0 = INB(nc_ctest0) & 0x84;
+ np->sv_ctest3 = INB(nc_ctest3) & 0x01;
+ np->sv_ctest4 = INB(nc_ctest4) & 0x80;
+ np->sv_ctest5 = INB(nc_ctest5) & 0x24;
+ np->sv_gpcntl = INB(nc_gpcntl);
+ np->sv_stest2 = INB(nc_stest2) & 0x20;
+ np->sv_stest4 = INB(nc_stest4);
+
+ /*
+ ** Wide ?
+ */
+
+ np->maxwide = (np->features & FE_WIDE)? 1 : 0;
+
+ /*
+ * Guess the frequency of the chip's clock.
+ */
+ if (np->features & FE_ULTRA)
+ np->clock_khz = 80000;
+ else
+ np->clock_khz = 40000;
+
+ /*
+ * Get the clock multiplier factor.
+ */
+ if (np->features & FE_QUAD)
+ np->multiplier = 4;
+ else if (np->features & FE_DBLR)
+ np->multiplier = 2;
+ else
+ np->multiplier = 1;
+
+ /*
+ * Measure SCSI clock frequency for chips
+ * it may vary from assumed one.
+ */
+ if (np->features & FE_VARCLK)
+ ncr_getclock(np, np->multiplier);
+
+ /*
+ * Divisor to be used for async (timer pre-scaler).
+ */
+ i = np->clock_divn - 1;
+ while (--i >= 0) {
+ if (10ul * SCSI_NCR_MIN_ASYNC * np->clock_khz > div_10M[i]) {
+ ++i;
+ break;
+ }
+ }
+ np->rv_scntl3 = i+1;
+
+ /*
+ * Minimum synchronous period factor supported by the chip.
+ * Btw, 'period' is in tenths of nanoseconds.
+ */
+
+ period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz;
+ if (period <= 250) np->minsync = 10;
+ else if (period <= 303) np->minsync = 11;
+ else if (period <= 500) np->minsync = 12;
+ else np->minsync = (period + 40 - 1) / 40;
+
+ /*
+ * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2).
+ */
+
+ if (np->minsync < 25 && !(np->features & FE_ULTRA))
+ np->minsync = 25;
+
+ /*
+ * Maximum synchronous period factor supported by the chip.
+ */
+
+ period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz);
+ np->maxsync = period > 2540 ? 254 : period / 10;
+
+ /*
+ ** Prepare initial value of other IO registers
+ */
+#if defined SCSI_NCR_TRUST_BIOS_SETTING
+ np->rv_scntl0 = np->sv_scntl0;
+ np->rv_dmode = np->sv_dmode;
+ np->rv_dcntl = np->sv_dcntl;
+ np->rv_ctest0 = np->sv_ctest0;
+ np->rv_ctest3 = np->sv_ctest3;
+ np->rv_ctest4 = np->sv_ctest4;
+ np->rv_ctest5 = np->sv_ctest5;
+ burst_max = burst_code(np->sv_dmode, np->sv_ctest0);
+#else
+
+ /*
+ ** Select burst length (dwords)
+ */
+ burst_max = driver_setup.burst_max;
+ if (burst_max == 255)
+ burst_max = burst_code(np->sv_dmode, np->sv_ctest0);
+ if (burst_max > 7)
+ burst_max = 7;
+ if (burst_max > np->maxburst)
+ burst_max = np->maxburst;
+
+ /*
+ ** Select all supported special features
+ */
+ if (np->features & FE_ERL)
+ np->rv_dmode |= ERL; /* Enable Read Line */
+ if (np->features & FE_BOF)
+ np->rv_dmode |= BOF; /* Burst Opcode Fetch */
+ if (np->features & FE_ERMP)
+ np->rv_dmode |= ERMP; /* Enable Read Multiple */
+ if (np->features & FE_PFEN)
+ np->rv_dcntl |= PFEN; /* Prefetch Enable */
+ if (np->features & FE_CLSE)
+ np->rv_dcntl |= CLSE; /* Cache Line Size Enable */
+ if (np->features & FE_WRIE)
+ np->rv_ctest3 |= WRIE; /* Write and Invalidate */
+ if (np->features & FE_DFS)
+ np->rv_ctest5 |= DFS; /* Dma Fifo Size */
+ if (np->features & FE_MUX)
+ np->rv_ctest4 |= MUX; /* Host bus multiplex mode */
+ if (np->features & FE_EA)
+ np->rv_dcntl |= EA; /* Enable ACK */
+ if (np->features & FE_EHP)
+ np->rv_ctest0 |= EHP; /* Even host parity */
+
+ /*
+ ** Select some other
+ */
+ if (driver_setup.master_parity)
+ np->rv_ctest4 |= MPEE; /* Master parity checking */
+ if (driver_setup.scsi_parity)
+ np->rv_scntl0 |= 0x0a; /* full arb., ena parity, par->ATN */
+
+ /*
+ ** Get SCSI addr of host adapter (set by bios?).
+ */
+ if (np->myaddr == 255) {
+ np->myaddr = INB(nc_scid) & 0x07;
+ if (!np->myaddr)
+ np->myaddr = SCSI_NCR_MYADDR;
+ }
+
+#endif /* SCSI_NCR_TRUST_BIOS_SETTING */
+
+ /*
+ * Prepare initial io register bits for burst length
+ */
+ ncr_init_burst(np, burst_max);
+
+ /*
+ ** Set SCSI BUS mode.
+ **
+ ** - ULTRA2 chips (895/895A/896) report the current
+ ** BUS mode through the STEST4 IO register.
+ ** - For previous generation chips (825/825A/875),
+ ** user has to tell us how to check against HVD,
+ ** since a 100% safe algorithm is not possible.
+ */
+ np->scsi_mode = SMODE_SE;
+ if (np->features & FE_DIFF) {
+ switch(driver_setup.diff_support) {
+ case 4: /* Trust previous settings if present, then GPIO3 */
+ if (np->sv_scntl3) {
+ if (np->sv_stest2 & 0x20)
+ np->scsi_mode = SMODE_HVD;
+ break;
+ }
+ case 3: /* SYMBIOS controllers report HVD through GPIO3 */
+ if (INB(nc_gpreg) & 0x08)
+ break;
+ case 2: /* Set HVD unconditionally */
+ np->scsi_mode = SMODE_HVD;
+ case 1: /* Trust previous settings for HVD */
+ if (np->sv_stest2 & 0x20)
+ np->scsi_mode = SMODE_HVD;
+ break;
+ default:/* Don't care about HVD */
+ break;
+ }
+ }
+ if (np->scsi_mode == SMODE_HVD)
+ np->rv_stest2 |= 0x20;
+
+ /*
+ ** Set LED support from SCRIPTS.
+ ** Ignore this feature for boards known to use a
+ ** specific GPIO wiring and for the 895A or 896
+ ** that drive the LED directly.
+ ** Also probe initial setting of GPIO0 as output.
+ */
+ if ((driver_setup.led_pin) &&
+ !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01))
+ np->features |= FE_LED0;
+
+ /*
+ ** Set irq mode.
+ */
+ switch(driver_setup.irqm & 3) {
+ case 2:
+ np->rv_dcntl |= IRQM;
+ break;
+ case 1:
+ np->rv_dcntl |= (np->sv_dcntl & IRQM);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ ** Configure targets according to driver setup.
+ ** Allow to override sync, wide and NOSCAN from
+ ** boot command line.
+ */
+ for (i = 0 ; i < MAX_TARGET ; i++) {
+ struct tcb *tp = &np->target[i];
+
+ tp->usrsync = driver_setup.default_sync;
+ tp->usrwide = driver_setup.max_wide;
+ tp->usrtags = MAX_TAGS;
+ tp->period = 0xffff;
+ if (!driver_setup.disconnection)
+ np->target[i].usrflag = UF_NODISC;
+ }
+
+ /*
+ ** Announce all that stuff to user.
+ */
+
+ printk(KERN_INFO "%s: ID %d, Fast-%d%s%s\n", ncr_name(np),
+ np->myaddr,
+ np->minsync < 12 ? 40 : (np->minsync < 25 ? 20 : 10),
+ (np->rv_scntl0 & 0xa) ? ", Parity Checking" : ", NO Parity",
+ (np->rv_stest2 & 0x20) ? ", Differential" : "");
+
+ if (bootverbose > 1) {
+ printk (KERN_INFO "%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
+ "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
+ ncr_name(np), np->sv_scntl3, np->sv_dmode, np->sv_dcntl,
+ np->sv_ctest3, np->sv_ctest4, np->sv_ctest5);
+
+ printk (KERN_INFO "%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
+ "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
+ ncr_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl,
+ np->rv_ctest3, np->rv_ctest4, np->rv_ctest5);
+ }
+
+ if (bootverbose && np->paddr2)
+ printk (KERN_INFO "%s: on-chip RAM at 0x%lx\n",
+ ncr_name(np), np->paddr2);
+}
+
+/*==========================================================
+**
+**
+** Done SCSI commands list management.
+**
+** We donnot enter the scsi_done() callback immediately
+** after a command has been seen as completed but we
+** insert it into a list which is flushed outside any kind
+** of driver critical section.
+** This allows to do minimal stuff under interrupt and
+** inside critical sections and to also avoid locking up
+** on recursive calls to driver entry points under SMP.
+** In fact, the only kernel point which is entered by the
+** driver with a driver lock set is kmalloc(GFP_ATOMIC)
+** that shall not reenter the driver under any circumstances,
+** AFAIK.
+**
+**==========================================================
+*/
+static inline void ncr_queue_done_cmd(struct ncb *np, struct scsi_cmnd *cmd)
+{
+ unmap_scsi_data(np, cmd);
+ cmd->host_scribble = (char *) np->done_list;
+ np->done_list = cmd;
+}
+
+static inline void ncr_flush_done_cmds(struct scsi_cmnd *lcmd)
+{
+ struct scsi_cmnd *cmd;
+
+ while (lcmd) {
+ cmd = lcmd;
+ lcmd = (struct scsi_cmnd *) cmd->host_scribble;
+ cmd->scsi_done(cmd);
+ }
+}
+
+/*==========================================================
+**
+**
+** Prepare the next negotiation message if needed.
+**
+** Fill in the part of message buffer that contains the
+** negotiation and the nego_status field of the CCB.
+** Returns the size of the message in bytes.
+**
+**
+**==========================================================
+*/
+
+
+static int ncr_prepare_nego(struct ncb *np, struct ccb *cp, u_char *msgptr)
+{
+ struct tcb *tp = &np->target[cp->target];
+ int msglen = 0;
+ int nego = 0;
+ struct scsi_target *starget = tp->starget;
+
+ /* negotiate wide transfers ? */
+ if (!tp->widedone) {
+ if (spi_support_wide(starget)) {
+ nego = NS_WIDE;
+ } else
+ tp->widedone=1;
+ }
+
+ /* negotiate synchronous transfers? */
+ if (!nego && !tp->period) {
+ if (spi_support_sync(starget)) {
+ nego = NS_SYNC;
+ } else {
+ tp->period =0xffff;
+ dev_info(&starget->dev, "target did not report SYNC.\n");
+ }
+ }
+
+ switch (nego) {
+ case NS_SYNC:
+ msgptr[msglen++] = M_EXTENDED;
+ msgptr[msglen++] = 3;
+ msgptr[msglen++] = M_X_SYNC_REQ;
+ msgptr[msglen++] = tp->maxoffs ? tp->minsync : 0;
+ msgptr[msglen++] = tp->maxoffs;
+ break;
+ case NS_WIDE:
+ msgptr[msglen++] = M_EXTENDED;
+ msgptr[msglen++] = 2;
+ msgptr[msglen++] = M_X_WIDE_REQ;
+ msgptr[msglen++] = tp->usrwide;
+ break;
+ }
+
+ cp->nego_status = nego;
+
+ if (nego) {
+ tp->nego_cp = cp;
+ if (DEBUG_FLAGS & DEBUG_NEGO) {
+ ncr_print_msg(cp, nego == NS_WIDE ?
+ "wide msgout":"sync_msgout", msgptr);
+ }
+ }
+
+ return msglen;
+}
+
+
+
+/*==========================================================
+**
+**
+** Start execution of a SCSI command.
+** This is called from the generic SCSI driver.
+**
+**
+**==========================================================
+*/
+static int ncr_queue_command (struct ncb *np, struct scsi_cmnd *cmd)
+{
+ struct scsi_device *sdev = cmd->device;
+ struct tcb *tp = &np->target[sdev->id];
+ struct lcb *lp = tp->lp[sdev->lun];
+ struct ccb *cp;
+
+ int segments;
+ u_char idmsg, *msgptr;
+ u32 msglen;
+ int direction;
+ u32 lastp, goalp;
+
+ /*---------------------------------------------
+ **
+ ** Some shortcuts ...
+ **
+ **---------------------------------------------
+ */
+ if ((sdev->id == np->myaddr ) ||
+ (sdev->id >= MAX_TARGET) ||
+ (sdev->lun >= MAX_LUN )) {
+ return(DID_BAD_TARGET);
+ }
+
+ /*---------------------------------------------
+ **
+ ** Complete the 1st TEST UNIT READY command
+ ** with error condition if the device is
+ ** flagged NOSCAN, in order to speed up
+ ** the boot.
+ **
+ **---------------------------------------------
+ */
+ if ((cmd->cmnd[0] == 0 || cmd->cmnd[0] == 0x12) &&
+ (tp->usrflag & UF_NOSCAN)) {
+ tp->usrflag &= ~UF_NOSCAN;
+ return DID_BAD_TARGET;
+ }
+
+ if (DEBUG_FLAGS & DEBUG_TINY) {
+ PRINT_ADDR(cmd, "CMD=%x ", cmd->cmnd[0]);
+ }
+
+ /*---------------------------------------------------
+ **
+ ** Assign a ccb / bind cmd.
+ ** If resetting, shorten settle_time if necessary
+ ** in order to avoid spurious timeouts.
+ ** If resetting or no free ccb,
+ ** insert cmd into the waiting list.
+ **
+ **----------------------------------------------------
+ */
+ if (np->settle_time && cmd->timeout_per_command >= HZ) {
+ u_long tlimit = ktime_get(cmd->timeout_per_command - HZ);
+ if (ktime_dif(np->settle_time, tlimit) > 0)
+ np->settle_time = tlimit;
+ }
+
+ if (np->settle_time || !(cp=ncr_get_ccb (np, cmd))) {
+ insert_into_waiting_list(np, cmd);
+ return(DID_OK);
+ }
+ cp->cmd = cmd;
+
+ /*----------------------------------------------------
+ **
+ ** Build the identify / tag / sdtr message
+ **
+ **----------------------------------------------------
+ */
+
+ idmsg = M_IDENTIFY | sdev->lun;
+
+ if (cp ->tag != NO_TAG ||
+ (cp != np->ccb && np->disc && !(tp->usrflag & UF_NODISC)))
+ idmsg |= 0x40;
+
+ msgptr = cp->scsi_smsg;
+ msglen = 0;
+ msgptr[msglen++] = idmsg;
+
+ if (cp->tag != NO_TAG) {
+ char order = np->order;
+
+ /*
+ ** Force ordered tag if necessary to avoid timeouts
+ ** and to preserve interactivity.
+ */
+ if (lp && ktime_exp(lp->tags_stime)) {
+ if (lp->tags_smap) {
+ order = M_ORDERED_TAG;
+ if ((DEBUG_FLAGS & DEBUG_TAGS)||bootverbose>2){
+ PRINT_ADDR(cmd,
+ "ordered tag forced.\n");
+ }
+ }
+ lp->tags_stime = ktime_get(3*HZ);
+ lp->tags_smap = lp->tags_umap;
+ }
+
+ if (order == 0) {
+ /*
+ ** Ordered write ops, unordered read ops.
+ */
+ switch (cmd->cmnd[0]) {
+ case 0x08: /* READ_SMALL (6) */
+ case 0x28: /* READ_BIG (10) */
+ case 0xa8: /* READ_HUGE (12) */
+ order = M_SIMPLE_TAG;
+ break;
+ default:
+ order = M_ORDERED_TAG;
+ }
+ }
+ msgptr[msglen++] = order;
+ /*
+ ** Actual tags are numbered 1,3,5,..2*MAXTAGS+1,
+ ** since we may have to deal with devices that have
+ ** problems with #TAG 0 or too great #TAG numbers.
+ */
+ msgptr[msglen++] = (cp->tag << 1) + 1;
+ }
+
+ /*----------------------------------------------------
+ **
+ ** Build the data descriptors
+ **
+ **----------------------------------------------------
+ */
+
+ direction = cmd->sc_data_direction;
+ if (direction != DMA_NONE) {
+ segments = ncr_scatter(np, cp, cp->cmd);
+ if (segments < 0) {
+ ncr_free_ccb(np, cp);
+ return(DID_ERROR);
+ }
+ }
+ else {
+ cp->data_len = 0;
+ segments = 0;
+ }
+
+ /*---------------------------------------------------
+ **
+ ** negotiation required?
+ **
+ ** (nego_status is filled by ncr_prepare_nego())
+ **
+ **---------------------------------------------------
+ */
+
+ cp->nego_status = 0;
+
+ if ((!tp->widedone || !tp->period) && !tp->nego_cp && lp) {
+ msglen += ncr_prepare_nego (np, cp, msgptr + msglen);
+ }
+
+ /*----------------------------------------------------
+ **
+ ** Determine xfer direction.
+ **
+ **----------------------------------------------------
+ */
+ if (!cp->data_len)
+ direction = DMA_NONE;
+
+ /*
+ ** If data direction is BIDIRECTIONAL, speculate FROM_DEVICE
+ ** but prepare alternate pointers for TO_DEVICE in case
+ ** of our speculation will be just wrong.
+ ** SCRIPTS will swap values if needed.
+ */
+ switch(direction) {
+ case DMA_BIDIRECTIONAL:
+ case DMA_TO_DEVICE:
+ goalp = NCB_SCRIPT_PHYS (np, data_out2) + 8;
+ if (segments <= MAX_SCATTERL)
+ lastp = goalp - 8 - (segments * 16);
+ else {
+ lastp = NCB_SCRIPTH_PHYS (np, hdata_out2);
+ lastp -= (segments - MAX_SCATTERL) * 16;
+ }
+ if (direction != DMA_BIDIRECTIONAL)
+ break;
+ cp->phys.header.wgoalp = cpu_to_scr(goalp);
+ cp->phys.header.wlastp = cpu_to_scr(lastp);
+ /* fall through */
+ case DMA_FROM_DEVICE:
+ goalp = NCB_SCRIPT_PHYS (np, data_in2) + 8;
+ if (segments <= MAX_SCATTERL)
+ lastp = goalp - 8 - (segments * 16);
+ else {
+ lastp = NCB_SCRIPTH_PHYS (np, hdata_in2);
+ lastp -= (segments - MAX_SCATTERL) * 16;
+ }
+ break;
+ default:
+ case DMA_NONE:
+ lastp = goalp = NCB_SCRIPT_PHYS (np, no_data);
+ break;
+ }
+
+ /*
+ ** Set all pointers values needed by SCRIPTS.
+ ** If direction is unknown, start at data_io.
+ */
+ cp->phys.header.lastp = cpu_to_scr(lastp);
+ cp->phys.header.goalp = cpu_to_scr(goalp);
+
+ if (direction == DMA_BIDIRECTIONAL)
+ cp->phys.header.savep =
+ cpu_to_scr(NCB_SCRIPTH_PHYS (np, data_io));
+ else
+ cp->phys.header.savep= cpu_to_scr(lastp);
+
+ /*
+ ** Save the initial data pointer in order to be able
+ ** to redo the command.
+ */
+ cp->startp = cp->phys.header.savep;
+
+ /*----------------------------------------------------
+ **
+ ** fill in ccb
+ **
+ **----------------------------------------------------
+ **
+ **
+ ** physical -> virtual backlink
+ ** Generic SCSI command
+ */
+
+ /*
+ ** Startqueue
+ */
+ cp->start.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, select));
+ cp->restart.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, resel_dsa));
+ /*
+ ** select
+ */
+ cp->phys.select.sel_id = sdev->id;
+ cp->phys.select.sel_scntl3 = tp->wval;
+ cp->phys.select.sel_sxfer = tp->sval;
+ /*
+ ** message
+ */
+ cp->phys.smsg.addr = cpu_to_scr(CCB_PHYS (cp, scsi_smsg));
+ cp->phys.smsg.size = cpu_to_scr(msglen);
+
+ /*
+ ** command
+ */
+ memcpy(cp->cdb_buf, cmd->cmnd, min_t(int, cmd->cmd_len, sizeof(cp->cdb_buf)));
+ cp->phys.cmd.addr = cpu_to_scr(CCB_PHYS (cp, cdb_buf[0]));
+ cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len);
+
+ /*
+ ** status
+ */
+ cp->actualquirks = 0;
+ cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY;
+ cp->scsi_status = S_ILLEGAL;
+ cp->parity_status = 0;
+
+ cp->xerr_status = XE_OK;
+#if 0
+ cp->sync_status = tp->sval;
+ cp->wide_status = tp->wval;
+#endif
+
+ /*----------------------------------------------------
+ **
+ ** Critical region: start this job.
+ **
+ **----------------------------------------------------
+ */
+
+ /* activate this job. */
+ cp->magic = CCB_MAGIC;
+
+ /*
+ ** insert next CCBs into start queue.
+ ** 2 max at a time is enough to flush the CCB wait queue.
+ */
+ cp->auto_sense = 0;
+ if (lp)
+ ncr_start_next_ccb(np, lp, 2);
+ else
+ ncr_put_start_queue(np, cp);
+
+ /* Command is successfully queued. */
+
+ return DID_OK;
+}
+
+
+/*==========================================================
+**
+**
+** Insert a CCB into the start queue and wake up the
+** SCRIPTS processor.
+**
+**
+**==========================================================
+*/
+
+static void ncr_start_next_ccb(struct ncb *np, struct lcb *lp, int maxn)
+{
+ struct list_head *qp;
+ struct ccb *cp;
+
+ if (lp->held_ccb)
+ return;
+
+ while (maxn-- && lp->queuedccbs < lp->queuedepth) {
+ qp = ncr_list_pop(&lp->wait_ccbq);
+ if (!qp)
+ break;
+ ++lp->queuedccbs;
+ cp = list_entry(qp, struct ccb, link_ccbq);
+ list_add_tail(qp, &lp->busy_ccbq);
+ lp->jump_ccb[cp->tag == NO_TAG ? 0 : cp->tag] =
+ cpu_to_scr(CCB_PHYS (cp, restart));
+ ncr_put_start_queue(np, cp);
+ }
+}
+
+static void ncr_put_start_queue(struct ncb *np, struct ccb *cp)
+{
+ u16 qidx;
+
+ /*
+ ** insert into start queue.
+ */
+ if (!np->squeueput) np->squeueput = 1;
+ qidx = np->squeueput + 2;
+ if (qidx >= MAX_START + MAX_START) qidx = 1;
+
+ np->scripth->tryloop [qidx] = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle));
+ MEMORY_BARRIER();
+ np->scripth->tryloop [np->squeueput] = cpu_to_scr(CCB_PHYS (cp, start));
+
+ np->squeueput = qidx;
+ ++np->queuedccbs;
+ cp->queued = 1;
+
+ if (DEBUG_FLAGS & DEBUG_QUEUE)
+ printk ("%s: queuepos=%d.\n", ncr_name (np), np->squeueput);
+
+ /*
+ ** Script processor may be waiting for reselect.
+ ** Wake it up.
+ */
+ MEMORY_BARRIER();
+ OUTB (nc_istat, SIGP);
+}
+
+
+static int ncr_reset_scsi_bus(struct ncb *np, int enab_int, int settle_delay)
+{
+ u32 term;
+ int retv = 0;
+
+ np->settle_time = ktime_get(settle_delay * HZ);
+
+ if (bootverbose > 1)
+ printk("%s: resetting, "
+ "command processing suspended for %d seconds\n",
+ ncr_name(np), settle_delay);
+
+ ncr_chip_reset(np, 100);
+ udelay(2000); /* The 895 needs time for the bus mode to settle */
+ if (enab_int)
+ OUTW (nc_sien, RST);
+ /*
+ ** Enable Tolerant, reset IRQD if present and
+ ** properly set IRQ mode, prior to resetting the bus.
+ */
+ OUTB (nc_stest3, TE);
+ OUTB (nc_scntl1, CRST);
+ udelay(200);
+
+ if (!driver_setup.bus_check)
+ goto out;
+ /*
+ ** Check for no terminators or SCSI bus shorts to ground.
+ ** Read SCSI data bus, data parity bits and control signals.
+ ** We are expecting RESET to be TRUE and other signals to be
+ ** FALSE.
+ */
+
+ term = INB(nc_sstat0);
+ term = ((term & 2) << 7) + ((term & 1) << 17); /* rst sdp0 */
+ term |= ((INB(nc_sstat2) & 0x01) << 26) | /* sdp1 */
+ ((INW(nc_sbdl) & 0xff) << 9) | /* d7-0 */
+ ((INW(nc_sbdl) & 0xff00) << 10) | /* d15-8 */
+ INB(nc_sbcl); /* req ack bsy sel atn msg cd io */
+
+ if (!(np->features & FE_WIDE))
+ term &= 0x3ffff;
+
+ if (term != (2<<7)) {
+ printk("%s: suspicious SCSI data while resetting the BUS.\n",
+ ncr_name(np));
+ printk("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = "
+ "0x%lx, expecting 0x%lx\n",
+ ncr_name(np),
+ (np->features & FE_WIDE) ? "dp1,d15-8," : "",
+ (u_long)term, (u_long)(2<<7));
+ if (driver_setup.bus_check == 1)
+ retv = 1;
+ }
+out:
+ OUTB (nc_scntl1, 0);
+ return retv;
+}
+
+/*
+ * Start reset process.
+ * If reset in progress do nothing.
+ * The interrupt handler will reinitialize the chip.
+ * The timeout handler will wait for settle_time before
+ * clearing it and so resuming command processing.
+ */
+static void ncr_start_reset(struct ncb *np)
+{
+ if (!np->settle_time) {
+ ncr_reset_scsi_bus(np, 1, driver_setup.settle_delay);
+ }
+}
+
+/*==========================================================
+**
+**
+** Reset the SCSI BUS.
+** This is called from the generic SCSI driver.
+**
+**
+**==========================================================
+*/
+static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd, int sync_reset)
+{
+/* struct scsi_device *device = cmd->device; */
+ struct ccb *cp;
+ int found;
+
+/*
+ * Return immediately if reset is in progress.
+ */
+ if (np->settle_time) {
+ return FAILED;
+ }
+/*
+ * Start the reset process.
+ * The script processor is then assumed to be stopped.
+ * Commands will now be queued in the waiting list until a settle
+ * delay of 2 seconds will be completed.
+ */
+ ncr_start_reset(np);
+/*
+ * First, look in the wakeup list
+ */
+ for (found=0, cp=np->ccb; cp; cp=cp->link_ccb) {
+ /*
+ ** look for the ccb of this command.
+ */
+ if (cp->host_status == HS_IDLE) continue;
+ if (cp->cmd == cmd) {
+ found = 1;
+ break;
+ }
+ }
+/*
+ * Then, look in the waiting list
+ */
+ if (!found && retrieve_from_waiting_list(0, np, cmd))
+ found = 1;
+/*
+ * Wake-up all awaiting commands with DID_RESET.
+ */
+ reset_waiting_list(np);
+/*
+ * Wake-up all pending commands with HS_RESET -> DID_RESET.
+ */
+ ncr_wakeup(np, HS_RESET);
+/*
+ * If the involved command was not in a driver queue, and the
+ * scsi driver told us reset is synchronous, and the command is not
+ * currently in the waiting list, complete it with DID_RESET status,
+ * in order to keep it alive.
+ */
+ if (!found && sync_reset && !retrieve_from_waiting_list(0, np, cmd)) {
+ cmd->result = ScsiResult(DID_RESET, 0);
+ ncr_queue_done_cmd(np, cmd);
+ }
+
+ return SUCCESS;
+}
+
+#if 0 /* unused and broken.. */
+/*==========================================================
+**
+**
+** Abort an SCSI command.
+** This is called from the generic SCSI driver.
+**
+**
+**==========================================================
+*/
+static int ncr_abort_command (struct ncb *np, struct scsi_cmnd *cmd)
+{
+/* struct scsi_device *device = cmd->device; */
+ struct ccb *cp;
+ int found;
+ int retv;
+
+/*
+ * First, look for the scsi command in the waiting list
+ */
+ if (remove_from_waiting_list(np, cmd)) {
+ cmd->result = ScsiResult(DID_ABORT, 0);
+ ncr_queue_done_cmd(np, cmd);
+ return SCSI_ABORT_SUCCESS;
+ }
+
+/*
+ * Then, look in the wakeup list
+ */
+ for (found=0, cp=np->ccb; cp; cp=cp->link_ccb) {
+ /*
+ ** look for the ccb of this command.
+ */
+ if (cp->host_status == HS_IDLE) continue;
+ if (cp->cmd == cmd) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found) {
+ return SCSI_ABORT_NOT_RUNNING;
+ }
+
+ if (np->settle_time) {
+ return SCSI_ABORT_SNOOZE;
+ }
+
+ /*
+ ** If the CCB is active, patch schedule jumps for the
+ ** script to abort the command.
+ */
+
+ switch(cp->host_status) {
+ case HS_BUSY:
+ case HS_NEGOTIATE:
+ printk ("%s: abort ccb=%p (cancel)\n", ncr_name (np), cp);
+ cp->start.schedule.l_paddr =
+ cpu_to_scr(NCB_SCRIPTH_PHYS (np, cancel));
+ retv = SCSI_ABORT_PENDING;
+ break;
+ case HS_DISCONNECT:
+ cp->restart.schedule.l_paddr =
+ cpu_to_scr(NCB_SCRIPTH_PHYS (np, abort));
+ retv = SCSI_ABORT_PENDING;
+ break;
+ default:
+ retv = SCSI_ABORT_NOT_RUNNING;
+ break;
+
+ }
+
+ /*
+ ** If there are no requests, the script
+ ** processor will sleep on SEL_WAIT_RESEL.
+ ** Let's wake it up, since it may have to work.
+ */
+ OUTB (nc_istat, SIGP);
+
+ return retv;
+}
+#endif
+
+static void ncr_detach(struct ncb *np)
+{
+ struct ccb *cp;
+ struct tcb *tp;
+ struct lcb *lp;
+ int target, lun;
+ int i;
+ char inst_name[16];
+
+ /* Local copy so we don't access np after freeing it! */
+ strlcpy(inst_name, ncr_name(np), sizeof(inst_name));
+
+ printk("%s: releasing host resources\n", ncr_name(np));
+
+/*
+** Stop the ncr_timeout process
+** Set release_stage to 1 and wait that ncr_timeout() set it to 2.
+*/
+
+#ifdef DEBUG_NCR53C8XX
+ printk("%s: stopping the timer\n", ncr_name(np));
+#endif
+ np->release_stage = 1;
+ for (i = 50 ; i && np->release_stage != 2 ; i--)
+ mdelay(100);
+ if (np->release_stage != 2)
+ printk("%s: the timer seems to be already stopped\n", ncr_name(np));
+ else np->release_stage = 2;
+
+/*
+** Disable chip interrupts
+*/
+
+#ifdef DEBUG_NCR53C8XX
+ printk("%s: disabling chip interrupts\n", ncr_name(np));
+#endif
+ OUTW (nc_sien , 0);
+ OUTB (nc_dien , 0);
+
+ /*
+ ** Reset NCR chip
+ ** Restore bios setting for automatic clock detection.
+ */
+
+ printk("%s: resetting chip\n", ncr_name(np));
+ ncr_chip_reset(np, 100);
+
+ OUTB(nc_dmode, np->sv_dmode);
+ OUTB(nc_dcntl, np->sv_dcntl);
+ OUTB(nc_ctest0, np->sv_ctest0);
+ OUTB(nc_ctest3, np->sv_ctest3);
+ OUTB(nc_ctest4, np->sv_ctest4);
+ OUTB(nc_ctest5, np->sv_ctest5);
+ OUTB(nc_gpcntl, np->sv_gpcntl);
+ OUTB(nc_stest2, np->sv_stest2);
+
+ ncr_selectclock(np, np->sv_scntl3);
+
+ /*
+ ** Free allocated ccb(s)
+ */
+
+ while ((cp=np->ccb->link_ccb) != NULL) {
+ np->ccb->link_ccb = cp->link_ccb;
+ if (cp->host_status) {
+ printk("%s: shall free an active ccb (host_status=%d)\n",
+ ncr_name(np), cp->host_status);
+ }
+#ifdef DEBUG_NCR53C8XX
+ printk("%s: freeing ccb (%lx)\n", ncr_name(np), (u_long) cp);
+#endif
+ m_free_dma(cp, sizeof(*cp), "CCB");
+ }
+
+ /* Free allocated tp(s) */
+
+ for (target = 0; target < MAX_TARGET ; target++) {
+ tp=&np->target[target];
+ for (lun = 0 ; lun < MAX_LUN ; lun++) {
+ lp = tp->lp[lun];
+ if (lp) {
+#ifdef DEBUG_NCR53C8XX
+ printk("%s: freeing lp (%lx)\n", ncr_name(np), (u_long) lp);
+#endif
+ if (lp->jump_ccb != &lp->jump_ccb_0)
+ m_free_dma(lp->jump_ccb,256,"JUMP_CCB");
+ m_free_dma(lp, sizeof(*lp), "LCB");
+ }
+ }
+ }
+
+ if (np->scripth0)
+ m_free_dma(np->scripth0, sizeof(struct scripth), "SCRIPTH");
+ if (np->script0)
+ m_free_dma(np->script0, sizeof(struct script), "SCRIPT");
+ if (np->ccb)
+ m_free_dma(np->ccb, sizeof(struct ccb), "CCB");
+ m_free_dma(np, sizeof(struct ncb), "NCB");
+
+ printk("%s: host resources successfully released\n", inst_name);
+}
+
+/*==========================================================
+**
+**
+** Complete execution of a SCSI command.
+** Signal completion to the generic SCSI driver.
+**
+**
+**==========================================================
+*/
+
+void ncr_complete (struct ncb *np, struct ccb *cp)
+{
+ struct scsi_cmnd *cmd;
+ struct tcb *tp;
+ struct lcb *lp;
+
+ /*
+ ** Sanity check
+ */
+
+ if (!cp || cp->magic != CCB_MAGIC || !cp->cmd)
+ return;
+
+ /*
+ ** Print minimal debug information.
+ */
+
+ if (DEBUG_FLAGS & DEBUG_TINY)
+ printk ("CCB=%lx STAT=%x/%x\n", (unsigned long)cp,
+ cp->host_status,cp->scsi_status);
+
+ /*
+ ** Get command, target and lun pointers.
+ */
+
+ cmd = cp->cmd;
+ cp->cmd = NULL;
+ tp = &np->target[cmd->device->id];
+ lp = tp->lp[cmd->device->lun];
+
+ /*
+ ** We donnot queue more than 1 ccb per target
+ ** with negotiation at any time. If this ccb was
+ ** used for negotiation, clear this info in the tcb.
+ */
+
+ if (cp == tp->nego_cp)
+ tp->nego_cp = NULL;
+
+ /*
+ ** If auto-sense performed, change scsi status.
+ */
+ if (cp->auto_sense) {
+ cp->scsi_status = cp->auto_sense;
+ }
+
+ /*
+ ** If we were recovering from queue full or performing
+ ** auto-sense, requeue skipped CCBs to the wait queue.
+ */
+
+ if (lp && lp->held_ccb) {
+ if (cp == lp->held_ccb) {
+ list_splice_init(&lp->skip_ccbq, &lp->wait_ccbq);
+ lp->held_ccb = NULL;
+ }
+ }
+
+ /*
+ ** Check for parity errors.
+ */
+
+ if (cp->parity_status > 1) {
+ PRINT_ADDR(cmd, "%d parity error(s).\n",cp->parity_status);
+ }
+
+ /*
+ ** Check for extended errors.
+ */
+
+ if (cp->xerr_status != XE_OK) {
+ switch (cp->xerr_status) {
+ case XE_EXTRA_DATA:
+ PRINT_ADDR(cmd, "extraneous data discarded.\n");
+ break;
+ case XE_BAD_PHASE:
+ PRINT_ADDR(cmd, "invalid scsi phase (4/5).\n");
+ break;
+ default:
+ PRINT_ADDR(cmd, "extended error %d.\n",
+ cp->xerr_status);
+ break;
+ }
+ if (cp->host_status==HS_COMPLETE)
+ cp->host_status = HS_FAIL;
+ }
+
+ /*
+ ** Print out any error for debugging purpose.
+ */
+ if (DEBUG_FLAGS & (DEBUG_RESULT|DEBUG_TINY)) {
+ if (cp->host_status!=HS_COMPLETE || cp->scsi_status!=S_GOOD) {
+ PRINT_ADDR(cmd, "ERROR: cmd=%x host_status=%x "
+ "scsi_status=%x\n", cmd->cmnd[0],
+ cp->host_status, cp->scsi_status);
+ }
+ }
+
+ /*
+ ** Check the status.
+ */
+ if ( (cp->host_status == HS_COMPLETE)
+ && (cp->scsi_status == S_GOOD ||
+ cp->scsi_status == S_COND_MET)) {
+ /*
+ * All went well (GOOD status).
+ * CONDITION MET status is returned on
+ * `Pre-Fetch' or `Search data' success.
+ */
+ cmd->result = ScsiResult(DID_OK, cp->scsi_status);
+
+ /*
+ ** @RESID@
+ ** Could dig out the correct value for resid,
+ ** but it would be quite complicated.
+ */
+ /* if (cp->phys.header.lastp != cp->phys.header.goalp) */
+
+ /*
+ ** Allocate the lcb if not yet.
+ */
+ if (!lp)
+ ncr_alloc_lcb (np, cmd->device->id, cmd->device->lun);
+
+ tp->bytes += cp->data_len;
+ tp->transfers ++;
+
+ /*
+ ** If tags was reduced due to queue full,
+ ** increase tags if 1000 good status received.
+ */
+ if (lp && lp->usetags && lp->numtags < lp->maxtags) {
+ ++lp->num_good;
+ if (lp->num_good >= 1000) {
+ lp->num_good = 0;
+ ++lp->numtags;
+ ncr_setup_tags (np, cmd->device);
+ }
+ }
+ } else if ((cp->host_status == HS_COMPLETE)
+ && (cp->scsi_status == S_CHECK_COND)) {
+ /*
+ ** Check condition code
+ */
+ cmd->result = ScsiResult(DID_OK, S_CHECK_COND);
+
+ /*
+ ** Copy back sense data to caller's buffer.
+ */
+ memcpy(cmd->sense_buffer, cp->sense_buf,
+ min(sizeof(cmd->sense_buffer), sizeof(cp->sense_buf)));
+
+ if (DEBUG_FLAGS & (DEBUG_RESULT|DEBUG_TINY)) {
+ u_char * p = (u_char*) & cmd->sense_buffer;
+ int i;
+ PRINT_ADDR(cmd, "sense data:");
+ for (i=0; i<14; i++) printk (" %x", *p++);
+ printk (".\n");
+ }
+ } else if ((cp->host_status == HS_COMPLETE)
+ && (cp->scsi_status == S_CONFLICT)) {
+ /*
+ ** Reservation Conflict condition code
+ */
+ cmd->result = ScsiResult(DID_OK, S_CONFLICT);
+
+ } else if ((cp->host_status == HS_COMPLETE)
+ && (cp->scsi_status == S_BUSY ||
+ cp->scsi_status == S_QUEUE_FULL)) {
+
+ /*
+ ** Target is busy.
+ */
+ cmd->result = ScsiResult(DID_OK, cp->scsi_status);
+
+ } else if ((cp->host_status == HS_SEL_TIMEOUT)
+ || (cp->host_status == HS_TIMEOUT)) {
+
+ /*
+ ** No response
+ */
+ cmd->result = ScsiResult(DID_TIME_OUT, cp->scsi_status);
+
+ } else if (cp->host_status == HS_RESET) {
+
+ /*
+ ** SCSI bus reset
+ */
+ cmd->result = ScsiResult(DID_RESET, cp->scsi_status);
+
+ } else if (cp->host_status == HS_ABORTED) {
+
+ /*
+ ** Transfer aborted
+ */
+ cmd->result = ScsiResult(DID_ABORT, cp->scsi_status);
+
+ } else {
+
+ /*
+ ** Other protocol messes
+ */
+ PRINT_ADDR(cmd, "COMMAND FAILED (%x %x) @%p.\n",
+ cp->host_status, cp->scsi_status, cp);
+
+ cmd->result = ScsiResult(DID_ERROR, cp->scsi_status);
+ }
+
+ /*
+ ** trace output
+ */
+
+ if (tp->usrflag & UF_TRACE) {
+ u_char * p;
+ int i;
+ PRINT_ADDR(cmd, " CMD:");
+ p = (u_char*) &cmd->cmnd[0];
+ for (i=0; i<cmd->cmd_len; i++) printk (" %x", *p++);
+
+ if (cp->host_status==HS_COMPLETE) {
+ switch (cp->scsi_status) {
+ case S_GOOD:
+ printk (" GOOD");
+ break;
+ case S_CHECK_COND:
+ printk (" SENSE:");
+ p = (u_char*) &cmd->sense_buffer;
+ for (i=0; i<14; i++)
+ printk (" %x", *p++);
+ break;
+ default:
+ printk (" STAT: %x\n", cp->scsi_status);
+ break;
+ }
+ } else printk (" HOSTERROR: %x", cp->host_status);
+ printk ("\n");
+ }
+
+ /*
+ ** Free this ccb
+ */
+ ncr_free_ccb (np, cp);
+
+ /*
+ ** requeue awaiting scsi commands for this lun.
+ */
+ if (lp && lp->queuedccbs < lp->queuedepth &&
+ !list_empty(&lp->wait_ccbq))
+ ncr_start_next_ccb(np, lp, 2);
+
+ /*
+ ** requeue awaiting scsi commands for this controller.
+ */
+ if (np->waiting_list)
+ requeue_waiting_list(np);
+
+ /*
+ ** signal completion to generic driver.
+ */
+ ncr_queue_done_cmd(np, cmd);
+}
+
+/*==========================================================
+**
+**
+** Signal all (or one) control block done.
+**
+**
+**==========================================================
+*/
+
+/*
+** This CCB has been skipped by the NCR.
+** Queue it in the correponding unit queue.
+*/
+static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp)
+{
+ struct tcb *tp = &np->target[cp->target];
+ struct lcb *lp = tp->lp[cp->lun];
+
+ if (lp && cp != np->ccb) {
+ cp->host_status &= ~HS_SKIPMASK;
+ cp->start.schedule.l_paddr =
+ cpu_to_scr(NCB_SCRIPT_PHYS (np, select));
+ list_del(&cp->link_ccbq);
+ list_add_tail(&cp->link_ccbq, &lp->skip_ccbq);
+ if (cp->queued) {
+ --lp->queuedccbs;
+ }
+ }
+ if (cp->queued) {
+ --np->queuedccbs;
+ cp->queued = 0;
+ }
+}
+
+/*
+** The NCR has completed CCBs.
+** Look at the DONE QUEUE if enabled, otherwise scan all CCBs
+*/
+void ncr_wakeup_done (struct ncb *np)
+{
+ struct ccb *cp;
+#ifdef SCSI_NCR_CCB_DONE_SUPPORT
+ int i, j;
+
+ i = np->ccb_done_ic;
+ while (1) {
+ j = i+1;
+ if (j >= MAX_DONE)
+ j = 0;
+
+ cp = np->ccb_done[j];
+ if (!CCB_DONE_VALID(cp))
+ break;
+
+ np->ccb_done[j] = (struct ccb *)CCB_DONE_EMPTY;
+ np->scripth->done_queue[5*j + 4] =
+ cpu_to_scr(NCB_SCRIPT_PHYS (np, done_plug));
+ MEMORY_BARRIER();
+ np->scripth->done_queue[5*i + 4] =
+ cpu_to_scr(NCB_SCRIPT_PHYS (np, done_end));
+
+ if (cp->host_status & HS_DONEMASK)
+ ncr_complete (np, cp);
+ else if (cp->host_status & HS_SKIPMASK)
+ ncr_ccb_skipped (np, cp);
+
+ i = j;
+ }
+ np->ccb_done_ic = i;
+#else
+ cp = np->ccb;
+ while (cp) {
+ if (cp->host_status & HS_DONEMASK)
+ ncr_complete (np, cp);
+ else if (cp->host_status & HS_SKIPMASK)
+ ncr_ccb_skipped (np, cp);
+ cp = cp->link_ccb;
+ }
+#endif
+}
+
+/*
+** Complete all active CCBs.
+*/
+void ncr_wakeup (struct ncb *np, u_long code)
+{
+ struct ccb *cp = np->ccb;
+
+ while (cp) {
+ if (cp->host_status != HS_IDLE) {
+ cp->host_status = code;
+ ncr_complete (np, cp);
+ }
+ cp = cp->link_ccb;
+ }
+}
+
+/*
+** Reset ncr chip.
+*/
+
+/* Some initialisation must be done immediately following reset, for 53c720,
+ * at least. EA (dcntl bit 5) isn't set here as it is set once only in
+ * the _detect function.
+ */
+static void ncr_chip_reset(struct ncb *np, int delay)
+{
+ OUTB (nc_istat, SRST);
+ udelay(delay);
+ OUTB (nc_istat, 0 );
+
+ if (np->features & FE_EHP)
+ OUTB (nc_ctest0, EHP);
+ if (np->features & FE_MUX)
+ OUTB (nc_ctest4, MUX);
+}
+
+
+/*==========================================================
+**
+**
+** Start NCR chip.
+**
+**
+**==========================================================
+*/
+
+void ncr_init (struct ncb *np, int reset, char * msg, u_long code)
+{
+ int i;
+
+ /*
+ ** Reset chip if asked, otherwise just clear fifos.
+ */
+
+ if (reset) {
+ OUTB (nc_istat, SRST);
+ udelay(100);
+ }
+ else {
+ OUTB (nc_stest3, TE|CSF);
+ OUTONB (nc_ctest3, CLF);
+ }
+
+ /*
+ ** Message.
+ */
+
+ if (msg) printk (KERN_INFO "%s: restart (%s).\n", ncr_name (np), msg);
+
+ /*
+ ** Clear Start Queue
+ */
+ np->queuedepth = MAX_START - 1; /* 1 entry needed as end marker */
+ for (i = 1; i < MAX_START + MAX_START; i += 2)
+ np->scripth0->tryloop[i] =
+ cpu_to_scr(NCB_SCRIPT_PHYS (np, idle));
+
+ /*
+ ** Start at first entry.
+ */
+ np->squeueput = 0;
+ np->script0->startpos[0] = cpu_to_scr(NCB_SCRIPTH_PHYS (np, tryloop));
+
+#ifdef SCSI_NCR_CCB_DONE_SUPPORT
+ /*
+ ** Clear Done Queue
+ */
+ for (i = 0; i < MAX_DONE; i++) {
+ np->ccb_done[i] = (struct ccb *)CCB_DONE_EMPTY;
+ np->scripth0->done_queue[5*i + 4] =
+ cpu_to_scr(NCB_SCRIPT_PHYS (np, done_end));
+ }
+#endif
+
+ /*
+ ** Start at first entry.
+ */
+ np->script0->done_pos[0] = cpu_to_scr(NCB_SCRIPTH_PHYS (np,done_queue));
+ np->ccb_done_ic = MAX_DONE-1;
+ np->scripth0->done_queue[5*(MAX_DONE-1) + 4] =
+ cpu_to_scr(NCB_SCRIPT_PHYS (np, done_plug));
+
+ /*
+ ** Wakeup all pending jobs.
+ */
+ ncr_wakeup (np, code);
+
+ /*
+ ** Init chip.
+ */
+
+ /*
+ ** Remove reset; big delay because the 895 needs time for the
+ ** bus mode to settle
+ */
+ ncr_chip_reset(np, 2000);
+
+ OUTB (nc_scntl0, np->rv_scntl0 | 0xc0);
+ /* full arb., ena parity, par->ATN */
+ OUTB (nc_scntl1, 0x00); /* odd parity, and remove CRST!! */
+
+ ncr_selectclock(np, np->rv_scntl3); /* Select SCSI clock */
+
+ OUTB (nc_scid , RRE|np->myaddr); /* Adapter SCSI address */
+ OUTW (nc_respid, 1ul<<np->myaddr); /* Id to respond to */
+ OUTB (nc_istat , SIGP ); /* Signal Process */
+ OUTB (nc_dmode , np->rv_dmode); /* Burst length, dma mode */
+ OUTB (nc_ctest5, np->rv_ctest5); /* Large fifo + large burst */
+
+ OUTB (nc_dcntl , NOCOM|np->rv_dcntl); /* Protect SFBR */
+ OUTB (nc_ctest0, np->rv_ctest0); /* 720: CDIS and EHP */
+ OUTB (nc_ctest3, np->rv_ctest3); /* Write and invalidate */
+ OUTB (nc_ctest4, np->rv_ctest4); /* Master parity checking */
+
+ OUTB (nc_stest2, EXT|np->rv_stest2); /* Extended Sreq/Sack filtering */
+ OUTB (nc_stest3, TE); /* TolerANT enable */
+ OUTB (nc_stime0, 0x0c ); /* HTH disabled STO 0.25 sec */
+
+ /*
+ ** Disable disconnects.
+ */
+
+ np->disc = 0;
+
+ /*
+ ** Enable GPIO0 pin for writing if LED support.
+ */
+
+ if (np->features & FE_LED0) {
+ OUTOFFB (nc_gpcntl, 0x01);
+ }
+
+ /*
+ ** enable ints
+ */
+
+ OUTW (nc_sien , STO|HTH|MA|SGE|UDC|RST|PAR);
+ OUTB (nc_dien , MDPE|BF|ABRT|SSI|SIR|IID);
+
+ /*
+ ** Fill in target structure.
+ ** Reinitialize usrsync.
+ ** Reinitialize usrwide.
+ ** Prepare sync negotiation according to actual SCSI bus mode.
+ */
+
+ for (i=0;i<MAX_TARGET;i++) {
+ struct tcb *tp = &np->target[i];
+
+ tp->sval = 0;
+ tp->wval = np->rv_scntl3;
+
+ if (tp->usrsync != 255) {
+ if (tp->usrsync <= np->maxsync) {
+ if (tp->usrsync < np->minsync) {
+ tp->usrsync = np->minsync;
+ }
+ }
+ else
+ tp->usrsync = 255;
+ }
+
+ if (tp->usrwide > np->maxwide)
+ tp->usrwide = np->maxwide;
+
+ }
+
+ /*
+ ** Start script processor.
+ */
+ if (np->paddr2) {
+ if (bootverbose)
+ printk ("%s: Downloading SCSI SCRIPTS.\n",
+ ncr_name(np));
+ OUTL (nc_scratcha, vtobus(np->script0));
+ OUTL_DSP (NCB_SCRIPTH_PHYS (np, start_ram));
+ }
+ else
+ OUTL_DSP (NCB_SCRIPT_PHYS (np, start));
+}
+
+/*==========================================================
+**
+** Prepare the negotiation values for wide and
+** synchronous transfers.
+**
+**==========================================================
+*/
+
+static void ncr_negotiate (struct ncb* np, struct tcb* tp)
+{
+ /*
+ ** minsync unit is 4ns !
+ */
+
+ u_long minsync = tp->usrsync;
+
+ /*
+ ** SCSI bus mode limit
+ */
+
+ if (np->scsi_mode && np->scsi_mode == SMODE_SE) {
+ if (minsync < 12) minsync = 12;
+ }
+
+ /*
+ ** our limit ..
+ */
+
+ if (minsync < np->minsync)
+ minsync = np->minsync;
+
+ /*
+ ** divider limit
+ */
+
+ if (minsync > np->maxsync)
+ minsync = 255;
+
+ if (tp->maxoffs > np->maxoffs)
+ tp->maxoffs = np->maxoffs;
+
+ tp->minsync = minsync;
+ tp->maxoffs = (minsync<255 ? tp->maxoffs : 0);
+
+ /*
+ ** period=0: has to negotiate sync transfer
+ */
+
+ tp->period=0;
+
+ /*
+ ** widedone=0: has to negotiate wide transfer
+ */
+ tp->widedone=0;
+}
+
+/*==========================================================
+**
+** Get clock factor and sync divisor for a given
+** synchronous factor period.
+** Returns the clock factor (in sxfer) and scntl3
+** synchronous divisor field.
+**
+**==========================================================
+*/
+
+static void ncr_getsync(struct ncb *np, u_char sfac, u_char *fakp, u_char *scntl3p)
+{
+ u_long clk = np->clock_khz; /* SCSI clock frequency in kHz */
+ int div = np->clock_divn; /* Number of divisors supported */
+ u_long fak; /* Sync factor in sxfer */
+ u_long per; /* Period in tenths of ns */
+ u_long kpc; /* (per * clk) */
+
+ /*
+ ** Compute the synchronous period in tenths of nano-seconds
+ */
+ if (sfac <= 10) per = 250;
+ else if (sfac == 11) per = 303;
+ else if (sfac == 12) per = 500;
+ else per = 40 * sfac;
+
+ /*
+ ** Look for the greatest clock divisor that allows an
+ ** input speed faster than the period.
+ */
+ kpc = per * clk;
+ while (--div >= 0)
+ if (kpc >= (div_10M[div] << 2)) break;
+
+ /*
+ ** Calculate the lowest clock factor that allows an output
+ ** speed not faster than the period.
+ */
+ fak = (kpc - 1) / div_10M[div] + 1;
+
+#if 0 /* This optimization does not seem very useful */
+
+ per = (fak * div_10M[div]) / clk;
+
+ /*
+ ** Why not to try the immediate lower divisor and to choose
+ ** the one that allows the fastest output speed ?
+ ** We don't want input speed too much greater than output speed.
+ */
+ if (div >= 1 && fak < 8) {
+ u_long fak2, per2;
+ fak2 = (kpc - 1) / div_10M[div-1] + 1;
+ per2 = (fak2 * div_10M[div-1]) / clk;
+ if (per2 < per && fak2 <= 8) {
+ fak = fak2;
+ per = per2;
+ --div;
+ }
+ }
+#endif
+
+ if (fak < 4) fak = 4; /* Should never happen, too bad ... */
+
+ /*
+ ** Compute and return sync parameters for the ncr
+ */
+ *fakp = fak - 4;
+ *scntl3p = ((div+1) << 4) + (sfac < 25 ? 0x80 : 0);
+}
+
+
+/*==========================================================
+**
+** Set actual values, sync status and patch all ccbs of
+** a target according to new sync/wide agreement.
+**
+**==========================================================
+*/
+
+static void ncr_set_sync_wide_status (struct ncb *np, u_char target)
+{
+ struct ccb *cp;
+ struct tcb *tp = &np->target[target];
+
+ /*
+ ** set actual value and sync_status
+ */
+ OUTB (nc_sxfer, tp->sval);
+ np->sync_st = tp->sval;
+ OUTB (nc_scntl3, tp->wval);
+ np->wide_st = tp->wval;
+
+ /*
+ ** patch ALL ccbs of this target.
+ */
+ for (cp = np->ccb; cp; cp = cp->link_ccb) {
+ if (!cp->cmd) continue;
+ if (cp->cmd->device->id != target) continue;
+#if 0
+ cp->sync_status = tp->sval;
+ cp->wide_status = tp->wval;
+#endif
+ cp->phys.select.sel_scntl3 = tp->wval;
+ cp->phys.select.sel_sxfer = tp->sval;
+ }
+}
+
+/*==========================================================
+**
+** Switch sync mode for current job and it's target
+**
+**==========================================================
+*/
+
+static void ncr_setsync (struct ncb *np, struct ccb *cp, u_char scntl3, u_char sxfer)
+{
+ struct scsi_cmnd *cmd = cp->cmd;
+ struct tcb *tp;
+ u_char target = INB (nc_sdid) & 0x0f;
+ u_char idiv;
+
+ BUG_ON(target != (cmd->device->id & 0xf));
+
+ tp = &np->target[target];
+
+ if (!scntl3 || !(sxfer & 0x1f))
+ scntl3 = np->rv_scntl3;
+ scntl3 = (scntl3 & 0xf0) | (tp->wval & EWS) | (np->rv_scntl3 & 0x07);
+
+ /*
+ ** Deduce the value of controller sync period from scntl3.
+ ** period is in tenths of nano-seconds.
+ */
+
+ idiv = ((scntl3 >> 4) & 0x7);
+ if ((sxfer & 0x1f) && idiv)
+ tp->period = (((sxfer>>5)+4)*div_10M[idiv-1])/np->clock_khz;
+ else
+ tp->period = 0xffff;
+
+ /* Stop there if sync parameters are unchanged */
+ if (tp->sval == sxfer && tp->wval == scntl3)
+ return;
+ tp->sval = sxfer;
+ tp->wval = scntl3;
+
+ if (sxfer & 0x01f) {
+ /* Disable extended Sreq/Sack filtering */
+ if (tp->period <= 2000)
+ OUTOFFB(nc_stest2, EXT);
+ }
+
+ spi_display_xfer_agreement(tp->starget);
+
+ /*
+ ** set actual value and sync_status
+ ** patch ALL ccbs of this target.
+ */
+ ncr_set_sync_wide_status(np, target);
+}
+
+/*==========================================================
+**
+** Switch wide mode for current job and it's target
+** SCSI specs say: a SCSI device that accepts a WDTR
+** message shall reset the synchronous agreement to
+** asynchronous mode.
+**
+**==========================================================
+*/
+
+static void ncr_setwide (struct ncb *np, struct ccb *cp, u_char wide, u_char ack)
+{
+ struct scsi_cmnd *cmd = cp->cmd;
+ u16 target = INB (nc_sdid) & 0x0f;
+ struct tcb *tp;
+ u_char scntl3;
+ u_char sxfer;
+
+ BUG_ON(target != (cmd->device->id & 0xf));
+
+ tp = &np->target[target];
+ tp->widedone = wide+1;
+ scntl3 = (tp->wval & (~EWS)) | (wide ? EWS : 0);
+
+ sxfer = ack ? 0 : tp->sval;
+
+ /*
+ ** Stop there if sync/wide parameters are unchanged
+ */
+ if (tp->sval == sxfer && tp->wval == scntl3) return;
+ tp->sval = sxfer;
+ tp->wval = scntl3;
+
+ /*
+ ** Bells and whistles ;-)
+ */
+ if (bootverbose >= 2) {
+ dev_info(&cmd->device->sdev_target->dev, "WIDE SCSI %sabled.\n",
+ (scntl3 & EWS) ? "en" : "dis");
+ }
+
+ /*
+ ** set actual value and sync_status
+ ** patch ALL ccbs of this target.
+ */
+ ncr_set_sync_wide_status(np, target);
+}
+
+/*==========================================================
+**
+** Switch tagged mode for a target.
+**
+**==========================================================
+*/
+
+static void ncr_setup_tags (struct ncb *np, struct scsi_device *sdev)
+{
+ unsigned char tn = sdev->id, ln = sdev->lun;
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
+ u_char reqtags, maxdepth;
+
+ /*
+ ** Just in case ...
+ */
+ if ((!tp) || (!lp) || !sdev)
+ return;
+
+ /*
+ ** If SCSI device queue depth is not yet set, leave here.
+ */
+ if (!lp->scdev_depth)
+ return;
+
+ /*
+ ** Donnot allow more tags than the SCSI driver can queue
+ ** for this device.
+ ** Donnot allow more tags than we can handle.
+ */
+ maxdepth = lp->scdev_depth;
+ if (maxdepth > lp->maxnxs) maxdepth = lp->maxnxs;
+ if (lp->maxtags > maxdepth) lp->maxtags = maxdepth;
+ if (lp->numtags > maxdepth) lp->numtags = maxdepth;
+
+ /*
+ ** only devices conformant to ANSI Version >= 2
+ ** only devices capable of tagged commands
+ ** only if enabled by user ..
+ */
+ if (sdev->tagged_supported && lp->numtags > 1) {
+ reqtags = lp->numtags;
+ } else {
+ reqtags = 1;
+ }
+
+ /*
+ ** Update max number of tags
+ */
+ lp->numtags = reqtags;
+ if (lp->numtags > lp->maxtags)
+ lp->maxtags = lp->numtags;
+
+ /*
+ ** If we want to switch tag mode, we must wait
+ ** for no CCB to be active.
+ */
+ if (reqtags > 1 && lp->usetags) { /* Stay in tagged mode */
+ if (lp->queuedepth == reqtags) /* Already announced */
+ return;
+ lp->queuedepth = reqtags;
+ }
+ else if (reqtags <= 1 && !lp->usetags) { /* Stay in untagged mode */
+ lp->queuedepth = reqtags;
+ return;
+ }
+ else { /* Want to switch tag mode */
+ if (lp->busyccbs) /* If not yet safe, return */
+ return;
+ lp->queuedepth = reqtags;
+ lp->usetags = reqtags > 1 ? 1 : 0;
+ }
+
+ /*
+ ** Patch the lun mini-script, according to tag mode.
+ */
+ lp->jump_tag.l_paddr = lp->usetags?
+ cpu_to_scr(NCB_SCRIPT_PHYS(np, resel_tag)) :
+ cpu_to_scr(NCB_SCRIPT_PHYS(np, resel_notag));
+
+ /*
+ ** Announce change to user.
+ */
+ if (bootverbose) {
+ if (lp->usetags) {
+ dev_info(&sdev->sdev_gendev,
+ "tagged command queue depth set to %d\n",
+ reqtags);
+ } else {
+ dev_info(&sdev->sdev_gendev,
+ "tagged command queueing disabled\n");
+ }
+ }
+}
+
+/*==========================================================
+**
+**
+** ncr timeout handler.
+**
+**
+**==========================================================
+**
+** Misused to keep the driver running when
+** interrupts are not configured correctly.
+**
+**----------------------------------------------------------
+*/
+
+static void ncr_timeout (struct ncb *np)
+{
+ u_long thistime = ktime_get(0);
+
+ /*
+ ** If release process in progress, let's go
+ ** Set the release stage from 1 to 2 to synchronize
+ ** with the release process.
+ */
+
+ if (np->release_stage) {
+ if (np->release_stage == 1) np->release_stage = 2;
+ return;
+ }
+
+ np->timer.expires = ktime_get(SCSI_NCR_TIMER_INTERVAL);
+ add_timer(&np->timer);
+
+ /*
+ ** If we are resetting the ncr, wait for settle_time before
+ ** clearing it. Then command processing will be resumed.
+ */
+ if (np->settle_time) {
+ if (np->settle_time <= thistime) {
+ if (bootverbose > 1)
+ printk("%s: command processing resumed\n", ncr_name(np));
+ np->settle_time = 0;
+ np->disc = 1;
+ requeue_waiting_list(np);
+ }
+ return;
+ }
+
+ /*
+ ** Since the generic scsi driver only allows us 0.5 second
+ ** to perform abort of a command, we must look at ccbs about
+ ** every 0.25 second.
+ */
+ if (np->lasttime + 4*HZ < thistime) {
+ /*
+ ** block ncr interrupts
+ */
+ np->lasttime = thistime;
+ }
+
+#ifdef SCSI_NCR_BROKEN_INTR
+ if (INB(nc_istat) & (INTF|SIP|DIP)) {
+
+ /*
+ ** Process pending interrupts.
+ */
+ if (DEBUG_FLAGS & DEBUG_TINY) printk ("{");
+ ncr_exception (np);
+ if (DEBUG_FLAGS & DEBUG_TINY) printk ("}");
+ }
+#endif /* SCSI_NCR_BROKEN_INTR */
+}
+
+/*==========================================================
+**
+** log message for real hard errors
+**
+** "ncr0 targ 0?: ERROR (ds:si) (so-si-sd) (sxfer/scntl3) @ name (dsp:dbc)."
+** " reg: r0 r1 r2 r3 r4 r5 r6 ..... rf."
+**
+** exception register:
+** ds: dstat
+** si: sist
+**
+** SCSI bus lines:
+** so: control lines as driver by NCR.
+** si: control lines as seen by NCR.
+** sd: scsi data lines as seen by NCR.
+**
+** wide/fastmode:
+** sxfer: (see the manual)
+** scntl3: (see the manual)
+**
+** current script command:
+** dsp: script address (relative to start of script).
+** dbc: first word of script command.
+**
+** First 16 register of the chip:
+** r0..rf
+**
+**==========================================================
+*/
+
+static void ncr_log_hard_error(struct ncb *np, u16 sist, u_char dstat)
+{
+ u32 dsp;
+ int script_ofs;
+ int script_size;
+ char *script_name;
+ u_char *script_base;
+ int i;
+
+ dsp = INL (nc_dsp);
+
+ if (dsp > np->p_script && dsp <= np->p_script + sizeof(struct script)) {
+ script_ofs = dsp - np->p_script;
+ script_size = sizeof(struct script);
+ script_base = (u_char *) np->script0;
+ script_name = "script";
+ }
+ else if (np->p_scripth < dsp &&
+ dsp <= np->p_scripth + sizeof(struct scripth)) {
+ script_ofs = dsp - np->p_scripth;
+ script_size = sizeof(struct scripth);
+ script_base = (u_char *) np->scripth0;
+ script_name = "scripth";
+ } else {
+ script_ofs = dsp;
+ script_size = 0;
+ script_base = NULL;
+ script_name = "mem";
+ }
+
+ printk ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n",
+ ncr_name (np), (unsigned)INB (nc_sdid)&0x0f, dstat, sist,
+ (unsigned)INB (nc_socl), (unsigned)INB (nc_sbcl), (unsigned)INB (nc_sbdl),
+ (unsigned)INB (nc_sxfer),(unsigned)INB (nc_scntl3), script_name, script_ofs,
+ (unsigned)INL (nc_dbc));
+
+ if (((script_ofs & 3) == 0) &&
+ (unsigned)script_ofs < script_size) {
+ printk ("%s: script cmd = %08x\n", ncr_name(np),
+ scr_to_cpu((int) *(ncrcmd *)(script_base + script_ofs)));
+ }
+
+ printk ("%s: regdump:", ncr_name(np));
+ for (i=0; i<16;i++)
+ printk (" %02x", (unsigned)INB_OFF(i));
+ printk (".\n");
+}
+
+/*============================================================
+**
+** ncr chip exception handler.
+**
+**============================================================
+**
+** In normal cases, interrupt conditions occur one at a
+** time. The ncr is able to stack in some extra registers
+** other interrupts that will occurs after the first one.
+** But severall interrupts may occur at the same time.
+**
+** We probably should only try to deal with the normal
+** case, but it seems that multiple interrupts occur in
+** some cases that are not abnormal at all.
+**
+** The most frequent interrupt condition is Phase Mismatch.
+** We should want to service this interrupt quickly.
+** A SCSI parity error may be delivered at the same time.
+** The SIR interrupt is not very frequent in this driver,
+** since the INTFLY is likely used for command completion
+** signaling.
+** The Selection Timeout interrupt may be triggered with
+** IID and/or UDC.
+** The SBMC interrupt (SCSI Bus Mode Change) may probably
+** occur at any time.
+**
+** This handler try to deal as cleverly as possible with all
+** the above.
+**
+**============================================================
+*/
+
+void ncr_exception (struct ncb *np)
+{
+ u_char istat, dstat;
+ u16 sist;
+ int i;
+
+ /*
+ ** interrupt on the fly ?
+ ** Since the global header may be copied back to a CCB
+ ** using a posted PCI memory write, the last operation on
+ ** the istat register is a READ in order to flush posted
+ ** PCI write commands.
+ */
+ istat = INB (nc_istat);
+ if (istat & INTF) {
+ OUTB (nc_istat, (istat & SIGP) | INTF);
+ istat = INB (nc_istat);
+ if (DEBUG_FLAGS & DEBUG_TINY) printk ("F ");
+ ncr_wakeup_done (np);
+ }
+
+ if (!(istat & (SIP|DIP)))
+ return;
+
+ if (istat & CABRT)
+ OUTB (nc_istat, CABRT);
+
+ /*
+ ** Steinbach's Guideline for Systems Programming:
+ ** Never test for an error condition you don't know how to handle.
+ */
+
+ sist = (istat & SIP) ? INW (nc_sist) : 0;
+ dstat = (istat & DIP) ? INB (nc_dstat) : 0;
+
+ if (DEBUG_FLAGS & DEBUG_TINY)
+ printk ("<%d|%x:%x|%x:%x>",
+ (int)INB(nc_scr0),
+ dstat,sist,
+ (unsigned)INL(nc_dsp),
+ (unsigned)INL(nc_dbc));
+
+ /*========================================================
+ ** First, interrupts we want to service cleanly.
+ **
+ ** Phase mismatch is the most frequent interrupt, and
+ ** so we have to service it as quickly and as cleanly
+ ** as possible.
+ ** Programmed interrupts are rarely used in this driver,
+ ** but we must handle them cleanly anyway.
+ ** We try to deal with PAR and SBMC combined with
+ ** some other interrupt(s).
+ **=========================================================
+ */
+
+ if (!(sist & (STO|GEN|HTH|SGE|UDC|RST)) &&
+ !(dstat & (MDPE|BF|ABRT|IID))) {
+ if ((sist & SBMC) && ncr_int_sbmc (np))
+ return;
+ if ((sist & PAR) && ncr_int_par (np))
+ return;
+ if (sist & MA) {
+ ncr_int_ma (np);
+ return;
+ }
+ if (dstat & SIR) {
+ ncr_int_sir (np);
+ return;
+ }
+ /*
+ ** DEL 397 - 53C875 Rev 3 - Part Number 609-0392410 - ITEM 2.
+ */
+ if (!(sist & (SBMC|PAR)) && !(dstat & SSI)) {
+ printk( "%s: unknown interrupt(s) ignored, "
+ "ISTAT=%x DSTAT=%x SIST=%x\n",
+ ncr_name(np), istat, dstat, sist);
+ return;
+ }
+ OUTONB_STD ();
+ return;
+ }
+
+ /*========================================================
+ ** Now, interrupts that need some fixing up.
+ ** Order and multiple interrupts is so less important.
+ **
+ ** If SRST has been asserted, we just reset the chip.
+ **
+ ** Selection is intirely handled by the chip. If the
+ ** chip says STO, we trust it. Seems some other
+ ** interrupts may occur at the same time (UDC, IID), so
+ ** we ignore them. In any case we do enough fix-up
+ ** in the service routine.
+ ** We just exclude some fatal dma errors.
+ **=========================================================
+ */
+
+ if (sist & RST) {
+ ncr_init (np, 1, bootverbose ? "scsi reset" : NULL, HS_RESET);
+ return;
+ }
+
+ if ((sist & STO) &&
+ !(dstat & (MDPE|BF|ABRT))) {
+ /*
+ ** DEL 397 - 53C875 Rev 3 - Part Number 609-0392410 - ITEM 1.
+ */
+ OUTONB (nc_ctest3, CLF);
+
+ ncr_int_sto (np);
+ return;
+ }
+
+ /*=========================================================
+ ** Now, interrupts we are not able to recover cleanly.
+ ** (At least for the moment).
+ **
+ ** Do the register dump.
+ ** Log message for real hard errors.
+ ** Clear all fifos.
+ ** For MDPE, BF, ABORT, IID, SGE and HTH we reset the
+ ** BUS and the chip.
+ ** We are more soft for UDC.
+ **=========================================================
+ */
+
+ if (ktime_exp(np->regtime)) {
+ np->regtime = ktime_get(10*HZ);
+ for (i = 0; i<sizeof(np->regdump); i++)
+ ((char*)&np->regdump)[i] = INB_OFF(i);
+ np->regdump.nc_dstat = dstat;
+ np->regdump.nc_sist = sist;
+ }
+
+ ncr_log_hard_error(np, sist, dstat);
+
+ printk ("%s: have to clear fifos.\n", ncr_name (np));
+ OUTB (nc_stest3, TE|CSF);
+ OUTONB (nc_ctest3, CLF);
+
+ if ((sist & (SGE)) ||
+ (dstat & (MDPE|BF|ABRT|IID))) {
+ ncr_start_reset(np);
+ return;
+ }
+
+ if (sist & HTH) {
+ printk ("%s: handshake timeout\n", ncr_name(np));
+ ncr_start_reset(np);
+ return;
+ }
+
+ if (sist & UDC) {
+ printk ("%s: unexpected disconnect\n", ncr_name(np));
+ OUTB (HS_PRT, HS_UNEXPECTED);
+ OUTL_DSP (NCB_SCRIPT_PHYS (np, cleanup));
+ return;
+ }
+
+ /*=========================================================
+ ** We just miss the cause of the interrupt. :(
+ ** Print a message. The timeout will do the real work.
+ **=========================================================
+ */
+ printk ("%s: unknown interrupt\n", ncr_name(np));
+}
+
+/*==========================================================
+**
+** ncr chip exception handler for selection timeout
+**
+**==========================================================
+**
+** There seems to be a bug in the 53c810.
+** Although a STO-Interrupt is pending,
+** it continues executing script commands.
+** But it will fail and interrupt (IID) on
+** the next instruction where it's looking
+** for a valid phase.
+**
+**----------------------------------------------------------
+*/
+
+void ncr_int_sto (struct ncb *np)
+{
+ u_long dsa;
+ struct ccb *cp;
+ if (DEBUG_FLAGS & DEBUG_TINY) printk ("T");
+
+ /*
+ ** look for ccb and set the status.
+ */
+
+ dsa = INL (nc_dsa);
+ cp = np->ccb;
+ while (cp && (CCB_PHYS (cp, phys) != dsa))
+ cp = cp->link_ccb;
+
+ if (cp) {
+ cp-> host_status = HS_SEL_TIMEOUT;
+ ncr_complete (np, cp);
+ }
+
+ /*
+ ** repair start queue and jump to start point.
+ */
+
+ OUTL_DSP (NCB_SCRIPTH_PHYS (np, sto_restart));
+ return;
+}
+
+/*==========================================================
+**
+** ncr chip exception handler for SCSI bus mode change
+**
+**==========================================================
+**
+** spi2-r12 11.2.3 says a transceiver mode change must
+** generate a reset event and a device that detects a reset
+** event shall initiate a hard reset. It says also that a
+** device that detects a mode change shall set data transfer
+** mode to eight bit asynchronous, etc...
+** So, just resetting should be enough.
+**
+**
+**----------------------------------------------------------
+*/
+
+static int ncr_int_sbmc (struct ncb *np)
+{
+ u_char scsi_mode = INB (nc_stest4) & SMODE;
+
+ if (scsi_mode != np->scsi_mode) {
+ printk("%s: SCSI bus mode change from %x to %x.\n",
+ ncr_name(np), np->scsi_mode, scsi_mode);
+
+ np->scsi_mode = scsi_mode;
+
+
+ /*
+ ** Suspend command processing for 1 second and
+ ** reinitialize all except the chip.
+ */
+ np->settle_time = ktime_get(1*HZ);
+ ncr_init (np, 0, bootverbose ? "scsi mode change" : NULL, HS_RESET);
+ return 1;
+ }
+ return 0;
+}
+
+/*==========================================================
+**
+** ncr chip exception handler for SCSI parity error.
+**
+**==========================================================
+**
+**
+**----------------------------------------------------------
+*/
+
+static int ncr_int_par (struct ncb *np)
+{
+ u_char hsts = INB (HS_PRT);
+ u32 dbc = INL (nc_dbc);
+ u_char sstat1 = INB (nc_sstat1);
+ int phase = -1;
+ int msg = -1;
+ u32 jmp;
+
+ printk("%s: SCSI parity error detected: SCR1=%d DBC=%x SSTAT1=%x\n",
+ ncr_name(np), hsts, dbc, sstat1);
+
+ /*
+ * Ignore the interrupt if the NCR is not connected
+ * to the SCSI bus, since the right work should have
+ * been done on unexpected disconnection handling.
+ */
+ if (!(INB (nc_scntl1) & ISCON))
+ return 0;
+
+ /*
+ * If the nexus is not clearly identified, reset the bus.
+ * We will try to do better later.
+ */
+ if (hsts & HS_INVALMASK)
+ goto reset_all;
+
+ /*
+ * If the SCSI parity error occurs in MSG IN phase, prepare a
+ * MSG PARITY message. Otherwise, prepare a INITIATOR DETECTED
+ * ERROR message and let the device decide to retry the command
+ * or to terminate with check condition. If we were in MSG IN
+ * phase waiting for the response of a negotiation, we will
+ * get SIR_NEGO_FAILED at dispatch.
+ */
+ if (!(dbc & 0xc0000000))
+ phase = (dbc >> 24) & 7;
+ if (phase == 7)
+ msg = M_PARITY;
+ else
+ msg = M_ID_ERROR;
+
+
+ /*
+ * If the NCR stopped on a MOVE ^ DATA_IN, we jump to a
+ * script that will ignore all data in bytes until phase
+ * change, since we are not sure the chip will wait the phase
+ * change prior to delivering the interrupt.
+ */
+ if (phase == 1)
+ jmp = NCB_SCRIPTH_PHYS (np, par_err_data_in);
+ else
+ jmp = NCB_SCRIPTH_PHYS (np, par_err_other);
+
+ OUTONB (nc_ctest3, CLF ); /* clear dma fifo */
+ OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */
+
+ np->msgout[0] = msg;
+ OUTL_DSP (jmp);
+ return 1;
+
+reset_all:
+ ncr_start_reset(np);
+ return 1;
+}
+
+/*==========================================================
+**
+**
+** ncr chip exception handler for phase errors.
+**
+**
+**==========================================================
+**
+** We have to construct a new transfer descriptor,
+** to transfer the rest of the current block.
+**
+**----------------------------------------------------------
+*/
+
+static void ncr_int_ma (struct ncb *np)
+{
+ u32 dbc;
+ u32 rest;
+ u32 dsp;
+ u32 dsa;
+ u32 nxtdsp;
+ u32 newtmp;
+ u32 *vdsp;
+ u32 oadr, olen;
+ u32 *tblp;
+ ncrcmd *newcmd;
+ u_char cmd, sbcl;
+ struct ccb *cp;
+
+ dsp = INL (nc_dsp);
+ dbc = INL (nc_dbc);
+ sbcl = INB (nc_sbcl);
+
+ cmd = dbc >> 24;
+ rest = dbc & 0xffffff;
+
+ /*
+ ** Take into account dma fifo and various buffers and latches,
+ ** only if the interrupted phase is an OUTPUT phase.
+ */
+
+ if ((cmd & 1) == 0) {
+ u_char ctest5, ss0, ss2;
+ u16 delta;
+
+ ctest5 = (np->rv_ctest5 & DFS) ? INB (nc_ctest5) : 0;
+ if (ctest5 & DFS)
+ delta=(((ctest5 << 8) | (INB (nc_dfifo) & 0xff)) - rest) & 0x3ff;
+ else
+ delta=(INB (nc_dfifo) - rest) & 0x7f;
+
+ /*
+ ** The data in the dma fifo has not been transferred to
+ ** the target -> add the amount to the rest
+ ** and clear the data.
+ ** Check the sstat2 register in case of wide transfer.
+ */
+
+ rest += delta;
+ ss0 = INB (nc_sstat0);
+ if (ss0 & OLF) rest++;
+ if (ss0 & ORF) rest++;
+ if (INB(nc_scntl3) & EWS) {
+ ss2 = INB (nc_sstat2);
+ if (ss2 & OLF1) rest++;
+ if (ss2 & ORF1) rest++;
+ }
+
+ if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE))
+ printk ("P%x%x RL=%d D=%d SS0=%x ", cmd&7, sbcl&7,
+ (unsigned) rest, (unsigned) delta, ss0);
+
+ } else {
+ if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE))
+ printk ("P%x%x RL=%d ", cmd&7, sbcl&7, rest);
+ }
+
+ /*
+ ** Clear fifos.
+ */
+ OUTONB (nc_ctest3, CLF ); /* clear dma fifo */
+ OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */
+
+ /*
+ ** locate matching cp.
+ ** if the interrupted phase is DATA IN or DATA OUT,
+ ** trust the global header.
+ */
+ dsa = INL (nc_dsa);
+ if (!(cmd & 6)) {
+ cp = np->header.cp;
+ if (CCB_PHYS(cp, phys) != dsa)
+ cp = NULL;
+ } else {
+ cp = np->ccb;
+ while (cp && (CCB_PHYS (cp, phys) != dsa))
+ cp = cp->link_ccb;
+ }
+
+ /*
+ ** try to find the interrupted script command,
+ ** and the address at which to continue.
+ */
+ vdsp = NULL;
+ nxtdsp = 0;
+ if (dsp > np->p_script &&
+ dsp <= np->p_script + sizeof(struct script)) {
+ vdsp = (u32 *)((char*)np->script0 + (dsp-np->p_script-8));
+ nxtdsp = dsp;
+ }
+ else if (dsp > np->p_scripth &&
+ dsp <= np->p_scripth + sizeof(struct scripth)) {
+ vdsp = (u32 *)((char*)np->scripth0 + (dsp-np->p_scripth-8));
+ nxtdsp = dsp;
+ }
+ else if (cp) {
+ if (dsp == CCB_PHYS (cp, patch[2])) {
+ vdsp = &cp->patch[0];
+ nxtdsp = scr_to_cpu(vdsp[3]);
+ }
+ else if (dsp == CCB_PHYS (cp, patch[6])) {
+ vdsp = &cp->patch[4];
+ nxtdsp = scr_to_cpu(vdsp[3]);
+ }
+ }
+
+ /*
+ ** log the information
+ */
+
+ if (DEBUG_FLAGS & DEBUG_PHASE) {
+ printk ("\nCP=%p CP2=%p DSP=%x NXT=%x VDSP=%p CMD=%x ",
+ cp, np->header.cp,
+ (unsigned)dsp,
+ (unsigned)nxtdsp, vdsp, cmd);
+ }
+
+ /*
+ ** cp=0 means that the DSA does not point to a valid control
+ ** block. This should not happen since we donnot use multi-byte
+ ** move while we are being reselected ot after command complete.
+ ** We are not able to recover from such a phase error.
+ */
+ if (!cp) {
+ printk ("%s: SCSI phase error fixup: "
+ "CCB already dequeued (0x%08lx)\n",
+ ncr_name (np), (u_long) np->header.cp);
+ goto reset_all;
+ }
+
+ /*
+ ** get old startaddress and old length.
+ */
+
+ oadr = scr_to_cpu(vdsp[1]);
+
+ if (cmd & 0x10) { /* Table indirect */
+ tblp = (u32 *) ((char*) &cp->phys + oadr);
+ olen = scr_to_cpu(tblp[0]);
+ oadr = scr_to_cpu(tblp[1]);
+ } else {
+ tblp = (u32 *) 0;
+ olen = scr_to_cpu(vdsp[0]) & 0xffffff;
+ }
+
+ if (DEBUG_FLAGS & DEBUG_PHASE) {
+ printk ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n",
+ (unsigned) (scr_to_cpu(vdsp[0]) >> 24),
+ tblp,
+ (unsigned) olen,
+ (unsigned) oadr);
+ }
+
+ /*
+ ** check cmd against assumed interrupted script command.
+ */
+
+ if (cmd != (scr_to_cpu(vdsp[0]) >> 24)) {
+ PRINT_ADDR(cp->cmd, "internal error: cmd=%02x != %02x=(vdsp[0] "
+ ">> 24)\n", cmd, scr_to_cpu(vdsp[0]) >> 24);
+
+ goto reset_all;
+ }
+
+ /*
+ ** cp != np->header.cp means that the header of the CCB
+ ** currently being processed has not yet been copied to
+ ** the global header area. That may happen if the device did
+ ** not accept all our messages after having been selected.
+ */
+ if (cp != np->header.cp) {
+ printk ("%s: SCSI phase error fixup: "
+ "CCB address mismatch (0x%08lx != 0x%08lx)\n",
+ ncr_name (np), (u_long) cp, (u_long) np->header.cp);
+ }
+
+ /*
+ ** if old phase not dataphase, leave here.
+ */
+
+ if (cmd & 0x06) {
+ PRINT_ADDR(cp->cmd, "phase change %x-%x %d@%08x resid=%d.\n",
+ cmd&7, sbcl&7, (unsigned)olen,
+ (unsigned)oadr, (unsigned)rest);
+ goto unexpected_phase;
+ }
+
+ /*
+ ** choose the correct patch area.
+ ** if savep points to one, choose the other.
+ */
+
+ newcmd = cp->patch;
+ newtmp = CCB_PHYS (cp, patch);
+ if (newtmp == scr_to_cpu(cp->phys.header.savep)) {
+ newcmd = &cp->patch[4];
+ newtmp = CCB_PHYS (cp, patch[4]);
+ }
+
+ /*
+ ** fillin the commands
+ */
+
+ newcmd[0] = cpu_to_scr(((cmd & 0x0f) << 24) | rest);
+ newcmd[1] = cpu_to_scr(oadr + olen - rest);
+ newcmd[2] = cpu_to_scr(SCR_JUMP);
+ newcmd[3] = cpu_to_scr(nxtdsp);
+
+ if (DEBUG_FLAGS & DEBUG_PHASE) {
+ PRINT_ADDR(cp->cmd, "newcmd[%d] %x %x %x %x.\n",
+ (int) (newcmd - cp->patch),
+ (unsigned)scr_to_cpu(newcmd[0]),
+ (unsigned)scr_to_cpu(newcmd[1]),
+ (unsigned)scr_to_cpu(newcmd[2]),
+ (unsigned)scr_to_cpu(newcmd[3]));
+ }
+ /*
+ ** fake the return address (to the patch).
+ ** and restart script processor at dispatcher.
+ */
+ OUTL (nc_temp, newtmp);
+ OUTL_DSP (NCB_SCRIPT_PHYS (np, dispatch));
+ return;
+
+ /*
+ ** Unexpected phase changes that occurs when the current phase
+ ** is not a DATA IN or DATA OUT phase are due to error conditions.
+ ** Such event may only happen when the SCRIPTS is using a
+ ** multibyte SCSI MOVE.
+ **
+ ** Phase change Some possible cause
+ **
+ ** COMMAND --> MSG IN SCSI parity error detected by target.
+ ** COMMAND --> STATUS Bad command or refused by target.
+ ** MSG OUT --> MSG IN Message rejected by target.
+ ** MSG OUT --> COMMAND Bogus target that discards extended
+ ** negotiation messages.
+ **
+ ** The code below does not care of the new phase and so
+ ** trusts the target. Why to annoy it ?
+ ** If the interrupted phase is COMMAND phase, we restart at
+ ** dispatcher.
+ ** If a target does not get all the messages after selection,
+ ** the code assumes blindly that the target discards extended
+ ** messages and clears the negotiation status.
+ ** If the target does not want all our response to negotiation,
+ ** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids
+ ** bloat for such a should_not_happen situation).
+ ** In all other situation, we reset the BUS.
+ ** Are these assumptions reasonnable ? (Wait and see ...)
+ */
+unexpected_phase:
+ dsp -= 8;
+ nxtdsp = 0;
+
+ switch (cmd & 7) {
+ case 2: /* COMMAND phase */
+ nxtdsp = NCB_SCRIPT_PHYS (np, dispatch);
+ break;
+#if 0
+ case 3: /* STATUS phase */
+ nxtdsp = NCB_SCRIPT_PHYS (np, dispatch);
+ break;
+#endif
+ case 6: /* MSG OUT phase */
+ np->scripth->nxtdsp_go_on[0] = cpu_to_scr(dsp + 8);
+ if (dsp == NCB_SCRIPT_PHYS (np, send_ident)) {
+ cp->host_status = HS_BUSY;
+ nxtdsp = NCB_SCRIPTH_PHYS (np, clratn_go_on);
+ }
+ else if (dsp == NCB_SCRIPTH_PHYS (np, send_wdtr) ||
+ dsp == NCB_SCRIPTH_PHYS (np, send_sdtr)) {
+ nxtdsp = NCB_SCRIPTH_PHYS (np, nego_bad_phase);
+ }
+ break;
+#if 0
+ case 7: /* MSG IN phase */
+ nxtdsp = NCB_SCRIPT_PHYS (np, clrack);
+ break;
+#endif
+ }
+
+ if (nxtdsp) {
+ OUTL_DSP (nxtdsp);
+ return;
+ }
+
+reset_all:
+ ncr_start_reset(np);
+}
+
+
+static void ncr_sir_to_redo(struct ncb *np, int num, struct ccb *cp)
+{
+ struct scsi_cmnd *cmd = cp->cmd;
+ struct tcb *tp = &np->target[cmd->device->id];
+ struct lcb *lp = tp->lp[cmd->device->lun];
+ struct list_head *qp;
+ struct ccb * cp2;
+ int disc_cnt = 0;
+ int busy_cnt = 0;
+ u32 startp;
+ u_char s_status = INB (SS_PRT);
+
+ /*
+ ** Let the SCRIPTS processor skip all not yet started CCBs,
+ ** and count disconnected CCBs. Since the busy queue is in
+ ** the same order as the chip start queue, disconnected CCBs
+ ** are before cp and busy ones after.
+ */
+ if (lp) {
+ qp = lp->busy_ccbq.prev;
+ while (qp != &lp->busy_ccbq) {
+ cp2 = list_entry(qp, struct ccb, link_ccbq);
+ qp = qp->prev;
+ ++busy_cnt;
+ if (cp2 == cp)
+ break;
+ cp2->start.schedule.l_paddr =
+ cpu_to_scr(NCB_SCRIPTH_PHYS (np, skip));
+ }
+ lp->held_ccb = cp; /* Requeue when this one completes */
+ disc_cnt = lp->queuedccbs - busy_cnt;
+ }
+
+ switch(s_status) {
+ default: /* Just for safety, should never happen */
+ case S_QUEUE_FULL:
+ /*
+ ** Decrease number of tags to the number of
+ ** disconnected commands.
+ */
+ if (!lp)
+ goto out;
+ if (bootverbose >= 1) {
+ PRINT_ADDR(cmd, "QUEUE FULL! %d busy, %d disconnected "
+ "CCBs\n", busy_cnt, disc_cnt);
+ }
+ if (disc_cnt < lp->numtags) {
+ lp->numtags = disc_cnt > 2 ? disc_cnt : 2;
+ lp->num_good = 0;
+ ncr_setup_tags (np, cmd->device);
+ }
+ /*
+ ** Requeue the command to the start queue.
+ ** If any disconnected commands,
+ ** Clear SIGP.
+ ** Jump to reselect.
+ */
+ cp->phys.header.savep = cp->startp;
+ cp->host_status = HS_BUSY;
+ cp->scsi_status = S_ILLEGAL;
+
+ ncr_put_start_queue(np, cp);
+ if (disc_cnt)
+ INB (nc_ctest2); /* Clear SIGP */
+ OUTL_DSP (NCB_SCRIPT_PHYS (np, reselect));
+ return;
+ case S_TERMINATED:
+ case S_CHECK_COND:
+ /*
+ ** If we were requesting sense, give up.
+ */
+ if (cp->auto_sense)
+ goto out;
+
+ /*
+ ** Device returned CHECK CONDITION status.
+ ** Prepare all needed data strutures for getting
+ ** sense data.
+ **
+ ** identify message
+ */
+ cp->scsi_smsg2[0] = IDENTIFY(0, cmd->device->lun);
+ cp->phys.smsg.addr = cpu_to_scr(CCB_PHYS (cp, scsi_smsg2));
+ cp->phys.smsg.size = cpu_to_scr(1);
+
+ /*
+ ** sense command
+ */
+ cp->phys.cmd.addr = cpu_to_scr(CCB_PHYS (cp, sensecmd));
+ cp->phys.cmd.size = cpu_to_scr(6);
+
+ /*
+ ** patch requested size into sense command
+ */
+ cp->sensecmd[0] = 0x03;
+ cp->sensecmd[1] = cmd->device->lun << 5;
+ cp->sensecmd[4] = sizeof(cp->sense_buf);
+
+ /*
+ ** sense data
+ */
+ memset(cp->sense_buf, 0, sizeof(cp->sense_buf));
+ cp->phys.sense.addr = cpu_to_scr(CCB_PHYS(cp,sense_buf[0]));
+ cp->phys.sense.size = cpu_to_scr(sizeof(cp->sense_buf));
+
+ /*
+ ** requeue the command.
+ */
+ startp = cpu_to_scr(NCB_SCRIPTH_PHYS (np, sdata_in));
+
+ cp->phys.header.savep = startp;
+ cp->phys.header.goalp = startp + 24;
+ cp->phys.header.lastp = startp;
+ cp->phys.header.wgoalp = startp + 24;
+ cp->phys.header.wlastp = startp;
+
+ cp->host_status = HS_BUSY;
+ cp->scsi_status = S_ILLEGAL;
+ cp->auto_sense = s_status;
+
+ cp->start.schedule.l_paddr =
+ cpu_to_scr(NCB_SCRIPT_PHYS (np, select));
+
+ /*
+ ** Select without ATN for quirky devices.
+ */
+ if (cmd->device->select_no_atn)
+ cp->start.schedule.l_paddr =
+ cpu_to_scr(NCB_SCRIPTH_PHYS (np, select_no_atn));
+
+ ncr_put_start_queue(np, cp);
+
+ OUTL_DSP (NCB_SCRIPT_PHYS (np, start));
+ return;
+ }
+
+out:
+ OUTONB_STD ();
+ return;
+}
+
+
+/*==========================================================
+**
+**
+** ncr chip exception handler for programmed interrupts.
+**
+**
+**==========================================================
+*/
+
+void ncr_int_sir (struct ncb *np)
+{
+ u_char scntl3;
+ u_char chg, ofs, per, fak, wide;
+ u_char num = INB (nc_dsps);
+ struct ccb *cp=NULL;
+ u_long dsa = INL (nc_dsa);
+ u_char target = INB (nc_sdid) & 0x0f;
+ struct tcb *tp = &np->target[target];
+ struct scsi_target *starget = tp->starget;
+
+ if (DEBUG_FLAGS & DEBUG_TINY) printk ("I#%d", num);
+
+ switch (num) {
+ case SIR_INTFLY:
+ /*
+ ** This is used for HP Zalon/53c720 where INTFLY
+ ** operation is currently broken.
+ */
+ ncr_wakeup_done(np);
+#ifdef SCSI_NCR_CCB_DONE_SUPPORT
+ OUTL(nc_dsp, NCB_SCRIPT_PHYS (np, done_end) + 8);
+#else
+ OUTL(nc_dsp, NCB_SCRIPT_PHYS (np, start));
+#endif
+ return;
+ case SIR_RESEL_NO_MSG_IN:
+ case SIR_RESEL_NO_IDENTIFY:
+ /*
+ ** If devices reselecting without sending an IDENTIFY
+ ** message still exist, this should help.
+ ** We just assume lun=0, 1 CCB, no tag.
+ */
+ if (tp->lp[0]) {
+ OUTL_DSP (scr_to_cpu(tp->lp[0]->jump_ccb[0]));
+ return;
+ }
+ case SIR_RESEL_BAD_TARGET: /* Will send a TARGET RESET message */
+ case SIR_RESEL_BAD_LUN: /* Will send a TARGET RESET message */
+ case SIR_RESEL_BAD_I_T_L_Q: /* Will send an ABORT TAG message */
+ case SIR_RESEL_BAD_I_T_L: /* Will send an ABORT message */
+ printk ("%s:%d: SIR %d, "
+ "incorrect nexus identification on reselection\n",
+ ncr_name (np), target, num);
+ goto out;
+ case SIR_DONE_OVERFLOW:
+ printk ("%s:%d: SIR %d, "
+ "CCB done queue overflow\n",
+ ncr_name (np), target, num);
+ goto out;
+ case SIR_BAD_STATUS:
+ cp = np->header.cp;
+ if (!cp || CCB_PHYS (cp, phys) != dsa)
+ goto out;
+ ncr_sir_to_redo(np, num, cp);
+ return;
+ default:
+ /*
+ ** lookup the ccb
+ */
+ cp = np->ccb;
+ while (cp && (CCB_PHYS (cp, phys) != dsa))
+ cp = cp->link_ccb;
+
+ BUG_ON(!cp);
+ BUG_ON(cp != np->header.cp);
+
+ if (!cp || cp != np->header.cp)
+ goto out;
+ }
+
+ switch (num) {
+/*-----------------------------------------------------------------------------
+**
+** Was Sie schon immer ueber transfermode negotiation wissen wollten ...
+**
+** We try to negotiate sync and wide transfer only after
+** a successful inquire command. We look at byte 7 of the
+** inquire data to determine the capabilities of the target.
+**
+** When we try to negotiate, we append the negotiation message
+** to the identify and (maybe) simple tag message.
+** The host status field is set to HS_NEGOTIATE to mark this
+** situation.
+**
+** If the target doesn't answer this message immidiately
+** (as required by the standard), the SIR_NEGO_FAIL interrupt
+** will be raised eventually.
+** The handler removes the HS_NEGOTIATE status, and sets the
+** negotiated value to the default (async / nowide).
+**
+** If we receive a matching answer immediately, we check it
+** for validity, and set the values.
+**
+** If we receive a Reject message immediately, we assume the
+** negotiation has failed, and fall back to standard values.
+**
+** If we receive a negotiation message while not in HS_NEGOTIATE
+** state, it's a target initiated negotiation. We prepare a
+** (hopefully) valid answer, set our parameters, and send back
+** this answer to the target.
+**
+** If the target doesn't fetch the answer (no message out phase),
+** we assume the negotiation has failed, and fall back to default
+** settings.
+**
+** When we set the values, we adjust them in all ccbs belonging
+** to this target, in the controller's register, and in the "phys"
+** field of the controller's struct ncb.
+**
+** Possible cases: hs sir msg_in value send goto
+** We try to negotiate:
+** -> target doesn't msgin NEG FAIL noop defa. - dispatch
+** -> target rejected our msg NEG FAIL reject defa. - dispatch
+** -> target answered (ok) NEG SYNC sdtr set - clrack
+** -> target answered (!ok) NEG SYNC sdtr defa. REJ--->msg_bad
+** -> target answered (ok) NEG WIDE wdtr set - clrack
+** -> target answered (!ok) NEG WIDE wdtr defa. REJ--->msg_bad
+** -> any other msgin NEG FAIL noop defa. - dispatch
+**
+** Target tries to negotiate:
+** -> incoming message --- SYNC sdtr set SDTR -
+** -> incoming message --- WIDE wdtr set WDTR -
+** We sent our answer:
+** -> target doesn't msgout --- PROTO ? defa. - dispatch
+**
+**-----------------------------------------------------------------------------
+*/
+
+ case SIR_NEGO_FAILED:
+ /*-------------------------------------------------------
+ **
+ ** Negotiation failed.
+ ** Target doesn't send an answer message,
+ ** or target rejected our message.
+ **
+ ** Remove negotiation request.
+ **
+ **-------------------------------------------------------
+ */
+ OUTB (HS_PRT, HS_BUSY);
+
+ /* fall through */
+
+ case SIR_NEGO_PROTO:
+ /*-------------------------------------------------------
+ **
+ ** Negotiation failed.
+ ** Target doesn't fetch the answer message.
+ **
+ **-------------------------------------------------------
+ */
+
+ if (DEBUG_FLAGS & DEBUG_NEGO) {
+ PRINT_ADDR(cp->cmd, "negotiation failed sir=%x "
+ "status=%x.\n", num, cp->nego_status);
+ }
+
+ /*
+ ** any error in negotiation:
+ ** fall back to default mode.
+ */
+ switch (cp->nego_status) {
+
+ case NS_SYNC:
+ spi_period(starget) = 0;
+ spi_offset(starget) = 0;
+ ncr_setsync (np, cp, 0, 0xe0);
+ break;
+
+ case NS_WIDE:
+ spi_width(starget) = 0;
+ ncr_setwide (np, cp, 0, 0);
+ break;
+
+ }
+ np->msgin [0] = M_NOOP;
+ np->msgout[0] = M_NOOP;
+ cp->nego_status = 0;
+ break;
+
+ case SIR_NEGO_SYNC:
+ if (DEBUG_FLAGS & DEBUG_NEGO) {
+ ncr_print_msg(cp, "sync msgin", np->msgin);
+ }
+
+ chg = 0;
+ per = np->msgin[3];
+ ofs = np->msgin[4];
+ if (ofs==0) per=255;
+
+ /*
+ ** if target sends SDTR message,
+ ** it CAN transfer synch.
+ */
+
+ if (ofs && starget)
+ spi_support_sync(starget) = 1;
+
+ /*
+ ** check values against driver limits.
+ */
+
+ if (per < np->minsync)
+ {chg = 1; per = np->minsync;}
+ if (per < tp->minsync)
+ {chg = 1; per = tp->minsync;}
+ if (ofs > tp->maxoffs)
+ {chg = 1; ofs = tp->maxoffs;}
+
+ /*
+ ** Check against controller limits.
+ */
+ fak = 7;
+ scntl3 = 0;
+ if (ofs != 0) {
+ ncr_getsync(np, per, &fak, &scntl3);
+ if (fak > 7) {
+ chg = 1;
+ ofs = 0;
+ }
+ }
+ if (ofs == 0) {
+ fak = 7;
+ per = 0;
+ scntl3 = 0;
+ tp->minsync = 0;
+ }
+
+ if (DEBUG_FLAGS & DEBUG_NEGO) {
+ PRINT_ADDR(cp->cmd, "sync: per=%d scntl3=0x%x ofs=%d "
+ "fak=%d chg=%d.\n", per, scntl3, ofs, fak, chg);
+ }
+
+ if (INB (HS_PRT) == HS_NEGOTIATE) {
+ OUTB (HS_PRT, HS_BUSY);
+ switch (cp->nego_status) {
+
+ case NS_SYNC:
+ /* This was an answer message */
+ if (chg) {
+ /* Answer wasn't acceptable. */
+ spi_period(starget) = 0;
+ spi_offset(starget) = 0;
+ ncr_setsync(np, cp, 0, 0xe0);
+ OUTL_DSP(NCB_SCRIPT_PHYS (np, msg_bad));
+ } else {
+ /* Answer is ok. */
+ spi_period(starget) = per;
+ spi_offset(starget) = ofs;
+ ncr_setsync(np, cp, scntl3, (fak<<5)|ofs);
+ OUTL_DSP(NCB_SCRIPT_PHYS (np, clrack));
+ }
+ return;
+
+ case NS_WIDE:
+ spi_width(starget) = 0;
+ ncr_setwide(np, cp, 0, 0);
+ break;
+ }
+ }
+
+ /*
+ ** It was a request. Set value and
+ ** prepare an answer message
+ */
+
+ spi_period(starget) = per;
+ spi_offset(starget) = ofs;
+ ncr_setsync(np, cp, scntl3, (fak<<5)|ofs);
+
+ np->msgout[0] = M_EXTENDED;
+ np->msgout[1] = 3;
+ np->msgout[2] = M_X_SYNC_REQ;
+ np->msgout[3] = per;
+ np->msgout[4] = ofs;
+
+ cp->nego_status = NS_SYNC;
+
+ if (DEBUG_FLAGS & DEBUG_NEGO) {
+ ncr_print_msg(cp, "sync msgout", np->msgout);
+ }
+
+ if (!ofs) {
+ OUTL_DSP (NCB_SCRIPT_PHYS (np, msg_bad));
+ return;
+ }
+ np->msgin [0] = M_NOOP;
+
+ break;
+
+ case SIR_NEGO_WIDE:
+ /*
+ ** Wide request message received.
+ */
+ if (DEBUG_FLAGS & DEBUG_NEGO) {
+ ncr_print_msg(cp, "wide msgin", np->msgin);
+ }
+
+ /*
+ ** get requested values.
+ */
+
+ chg = 0;
+ wide = np->msgin[3];
+
+ /*
+ ** if target sends WDTR message,
+ ** it CAN transfer wide.
+ */
+
+ if (wide && starget)
+ spi_support_wide(starget) = 1;
+
+ /*
+ ** check values against driver limits.
+ */
+
+ if (wide > tp->usrwide)
+ {chg = 1; wide = tp->usrwide;}
+
+ if (DEBUG_FLAGS & DEBUG_NEGO) {
+ PRINT_ADDR(cp->cmd, "wide: wide=%d chg=%d.\n", wide,
+ chg);
+ }
+
+ if (INB (HS_PRT) == HS_NEGOTIATE) {
+ OUTB (HS_PRT, HS_BUSY);
+ switch (cp->nego_status) {
+
+ case NS_WIDE:
+ /*
+ ** This was an answer message
+ */
+ if (chg) {
+ /* Answer wasn't acceptable. */
+ spi_width(starget) = 0;
+ ncr_setwide(np, cp, 0, 1);
+ OUTL_DSP (NCB_SCRIPT_PHYS (np, msg_bad));
+ } else {
+ /* Answer is ok. */
+ spi_width(starget) = wide;
+ ncr_setwide(np, cp, wide, 1);
+ OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack));
+ }
+ return;
+
+ case NS_SYNC:
+ spi_period(starget) = 0;
+ spi_offset(starget) = 0;
+ ncr_setsync(np, cp, 0, 0xe0);
+ break;
+ }
+ }
+
+ /*
+ ** It was a request, set value and
+ ** prepare an answer message
+ */
+
+ spi_width(starget) = wide;
+ ncr_setwide(np, cp, wide, 1);
+
+ np->msgout[0] = M_EXTENDED;
+ np->msgout[1] = 2;
+ np->msgout[2] = M_X_WIDE_REQ;
+ np->msgout[3] = wide;
+
+ np->msgin [0] = M_NOOP;
+
+ cp->nego_status = NS_WIDE;
+
+ if (DEBUG_FLAGS & DEBUG_NEGO) {
+ ncr_print_msg(cp, "wide msgout", np->msgin);
+ }
+ break;
+
+/*--------------------------------------------------------------------
+**
+** Processing of special messages
+**
+**--------------------------------------------------------------------
+*/
+
+ case SIR_REJECT_RECEIVED:
+ /*-----------------------------------------------
+ **
+ ** We received a M_REJECT message.
+ **
+ **-----------------------------------------------
+ */
+
+ PRINT_ADDR(cp->cmd, "M_REJECT received (%x:%x).\n",
+ (unsigned)scr_to_cpu(np->lastmsg), np->msgout[0]);
+ break;
+
+ case SIR_REJECT_SENT:
+ /*-----------------------------------------------
+ **
+ ** We received an unknown message
+ **
+ **-----------------------------------------------
+ */
+
+ ncr_print_msg(cp, "M_REJECT sent for", np->msgin);
+ break;
+
+/*--------------------------------------------------------------------
+**
+** Processing of special messages
+**
+**--------------------------------------------------------------------
+*/
+
+ case SIR_IGN_RESIDUE:
+ /*-----------------------------------------------
+ **
+ ** We received an IGNORE RESIDUE message,
+ ** which couldn't be handled by the script.
+ **
+ **-----------------------------------------------
+ */
+
+ PRINT_ADDR(cp->cmd, "M_IGN_RESIDUE received, but not yet "
+ "implemented.\n");
+ break;
+#if 0
+ case SIR_MISSING_SAVE:
+ /*-----------------------------------------------
+ **
+ ** We received an DISCONNECT message,
+ ** but the datapointer wasn't saved before.
+ **
+ **-----------------------------------------------
+ */
+
+ PRINT_ADDR(cp->cmd, "M_DISCONNECT received, but datapointer "
+ "not saved: data=%x save=%x goal=%x.\n",
+ (unsigned) INL (nc_temp),
+ (unsigned) scr_to_cpu(np->header.savep),
+ (unsigned) scr_to_cpu(np->header.goalp));
+ break;
+#endif
+ }
+
+out:
+ OUTONB_STD ();
+}
+
+/*==========================================================
+**
+**
+** Acquire a control block
+**
+**
+**==========================================================
+*/
+
+static struct ccb *ncr_get_ccb(struct ncb *np, struct scsi_cmnd *cmd)
+{
+ u_char tn = cmd->device->id;
+ u_char ln = cmd->device->lun;
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
+ u_char tag = NO_TAG;
+ struct ccb *cp = NULL;
+
+ /*
+ ** Lun structure available ?
+ */
+ if (lp) {
+ struct list_head *qp;
+ /*
+ ** Keep from using more tags than we can handle.
+ */
+ if (lp->usetags && lp->busyccbs >= lp->maxnxs)
+ return NULL;
+
+ /*
+ ** Allocate a new CCB if needed.
+ */
+ if (list_empty(&lp->free_ccbq))
+ ncr_alloc_ccb(np, tn, ln);
+
+ /*
+ ** Look for free CCB
+ */
+ qp = ncr_list_pop(&lp->free_ccbq);
+ if (qp) {
+ cp = list_entry(qp, struct ccb, link_ccbq);
+ if (cp->magic) {
+ PRINT_ADDR(cmd, "ccb free list corrupted "
+ "(@%p)\n", cp);
+ cp = NULL;
+ } else {
+ list_add_tail(qp, &lp->wait_ccbq);
+ ++lp->busyccbs;
+ }
+ }
+
+ /*
+ ** If a CCB is available,
+ ** Get a tag for this nexus if required.
+ */
+ if (cp) {
+ if (lp->usetags)
+ tag = lp->cb_tags[lp->ia_tag];
+ }
+ else if (lp->actccbs > 0)
+ return NULL;
+ }
+
+ /*
+ ** if nothing available, take the default.
+ */
+ if (!cp)
+ cp = np->ccb;
+
+ /*
+ ** Wait until available.
+ */
+#if 0
+ while (cp->magic) {
+ if (flags & SCSI_NOSLEEP) break;
+ if (tsleep ((caddr_t)cp, PRIBIO|PCATCH, "ncr", 0))
+ break;
+ }
+#endif
+
+ if (cp->magic)
+ return NULL;
+
+ cp->magic = 1;
+
+ /*
+ ** Move to next available tag if tag used.
+ */
+ if (lp) {
+ if (tag != NO_TAG) {
+ ++lp->ia_tag;
+ if (lp->ia_tag == MAX_TAGS)
+ lp->ia_tag = 0;
+ lp->tags_umap |= (((tagmap_t) 1) << tag);
+ }
+ }
+
+ /*
+ ** Remember all informations needed to free this CCB.
+ */
+ cp->tag = tag;
+ cp->target = tn;
+ cp->lun = ln;
+
+ if (DEBUG_FLAGS & DEBUG_TAGS) {
+ PRINT_ADDR(cmd, "ccb @%p using tag %d.\n", cp, tag);
+ }
+
+ return cp;
+}
+
+/*==========================================================
+**
+**
+** Release one control block
+**
+**
+**==========================================================
+*/
+
+static void ncr_free_ccb (struct ncb *np, struct ccb *cp)
+{
+ struct tcb *tp = &np->target[cp->target];
+ struct lcb *lp = tp->lp[cp->lun];
+
+ if (DEBUG_FLAGS & DEBUG_TAGS) {
+ PRINT_ADDR(cp->cmd, "ccb @%p freeing tag %d.\n", cp, cp->tag);
+ }
+
+ /*
+ ** If lun control block available,
+ ** decrement active commands and increment credit,
+ ** free the tag if any and remove the JUMP for reselect.
+ */
+ if (lp) {
+ if (cp->tag != NO_TAG) {
+ lp->cb_tags[lp->if_tag++] = cp->tag;
+ if (lp->if_tag == MAX_TAGS)
+ lp->if_tag = 0;
+ lp->tags_umap &= ~(((tagmap_t) 1) << cp->tag);
+ lp->tags_smap &= lp->tags_umap;
+ lp->jump_ccb[cp->tag] =
+ cpu_to_scr(NCB_SCRIPTH_PHYS(np, bad_i_t_l_q));
+ } else {
+ lp->jump_ccb[0] =
+ cpu_to_scr(NCB_SCRIPTH_PHYS(np, bad_i_t_l));
+ }
+ }
+
+ /*
+ ** Make this CCB available.
+ */
+
+ if (lp) {
+ if (cp != np->ccb)
+ list_move(&cp->link_ccbq, &lp->free_ccbq);
+ --lp->busyccbs;
+ if (cp->queued) {
+ --lp->queuedccbs;
+ }
+ }
+ cp -> host_status = HS_IDLE;
+ cp -> magic = 0;
+ if (cp->queued) {
+ --np->queuedccbs;
+ cp->queued = 0;
+ }
+
+#if 0
+ if (cp == np->ccb)
+ wakeup ((caddr_t) cp);
+#endif
+}
+
+
+#define ncr_reg_bus_addr(r) (np->paddr + offsetof (struct ncr_reg, r))
+
+/*------------------------------------------------------------------------
+** Initialize the fixed part of a CCB structure.
+**------------------------------------------------------------------------
+**------------------------------------------------------------------------
+*/
+static void ncr_init_ccb(struct ncb *np, struct ccb *cp)
+{
+ ncrcmd copy_4 = np->features & FE_PFEN ? SCR_COPY(4) : SCR_COPY_F(4);
+
+ /*
+ ** Remember virtual and bus address of this ccb.
+ */
+ cp->p_ccb = vtobus(cp);
+ cp->phys.header.cp = cp;
+
+ /*
+ ** This allows list_del to work for the default ccb.
+ */
+ INIT_LIST_HEAD(&cp->link_ccbq);
+
+ /*
+ ** Initialyze the start and restart launch script.
+ **
+ ** COPY(4) @(...p_phys), @(dsa)
+ ** JUMP @(sched_point)
+ */
+ cp->start.setup_dsa[0] = cpu_to_scr(copy_4);
+ cp->start.setup_dsa[1] = cpu_to_scr(CCB_PHYS(cp, start.p_phys));
+ cp->start.setup_dsa[2] = cpu_to_scr(ncr_reg_bus_addr(nc_dsa));
+ cp->start.schedule.l_cmd = cpu_to_scr(SCR_JUMP);
+ cp->start.p_phys = cpu_to_scr(CCB_PHYS(cp, phys));
+
+ memcpy(&cp->restart, &cp->start, sizeof(cp->restart));
+
+ cp->start.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle));
+ cp->restart.schedule.l_paddr = cpu_to_scr(NCB_SCRIPTH_PHYS (np, abort));
+}
+
+
+/*------------------------------------------------------------------------
+** Allocate a CCB and initialize its fixed part.
+**------------------------------------------------------------------------
+**------------------------------------------------------------------------
+*/
+static void ncr_alloc_ccb(struct ncb *np, u_char tn, u_char ln)
+{
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
+ struct ccb *cp = NULL;
+
+ /*
+ ** Allocate memory for this CCB.
+ */
+ cp = m_calloc_dma(sizeof(struct ccb), "CCB");
+ if (!cp)
+ return;
+
+ /*
+ ** Count it and initialyze it.
+ */
+ lp->actccbs++;
+ np->actccbs++;
+ memset(cp, 0, sizeof (*cp));
+ ncr_init_ccb(np, cp);
+
+ /*
+ ** Chain into wakeup list and free ccb queue and take it
+ ** into account for tagged commands.
+ */
+ cp->link_ccb = np->ccb->link_ccb;
+ np->ccb->link_ccb = cp;
+
+ list_add(&cp->link_ccbq, &lp->free_ccbq);
+}
+
+/*==========================================================
+**
+**
+** Allocation of resources for Targets/Luns/Tags.
+**
+**
+**==========================================================
+*/
+
+
+/*------------------------------------------------------------------------
+** Target control block initialisation.
+**------------------------------------------------------------------------
+** This data structure is fully initialized after a SCSI command
+** has been successfully completed for this target.
+** It contains a SCRIPT that is called on target reselection.
+**------------------------------------------------------------------------
+*/
+static void ncr_init_tcb (struct ncb *np, u_char tn)
+{
+ struct tcb *tp = &np->target[tn];
+ ncrcmd copy_1 = np->features & FE_PFEN ? SCR_COPY(1) : SCR_COPY_F(1);
+ int th = tn & 3;
+ int i;
+
+ /*
+ ** Jump to next tcb if SFBR does not match this target.
+ ** JUMP IF (SFBR != #target#), @(next tcb)
+ */
+ tp->jump_tcb.l_cmd =
+ cpu_to_scr((SCR_JUMP ^ IFFALSE (DATA (0x80 + tn))));
+ tp->jump_tcb.l_paddr = np->jump_tcb[th].l_paddr;
+
+ /*
+ ** Load the synchronous transfer register.
+ ** COPY @(tp->sval), @(sxfer)
+ */
+ tp->getscr[0] = cpu_to_scr(copy_1);
+ tp->getscr[1] = cpu_to_scr(vtobus (&tp->sval));
+#ifdef SCSI_NCR_BIG_ENDIAN
+ tp->getscr[2] = cpu_to_scr(ncr_reg_bus_addr(nc_sxfer) ^ 3);
+#else
+ tp->getscr[2] = cpu_to_scr(ncr_reg_bus_addr(nc_sxfer));
+#endif
+
+ /*
+ ** Load the timing register.
+ ** COPY @(tp->wval), @(scntl3)
+ */
+ tp->getscr[3] = cpu_to_scr(copy_1);
+ tp->getscr[4] = cpu_to_scr(vtobus (&tp->wval));
+#ifdef SCSI_NCR_BIG_ENDIAN
+ tp->getscr[5] = cpu_to_scr(ncr_reg_bus_addr(nc_scntl3) ^ 3);
+#else
+ tp->getscr[5] = cpu_to_scr(ncr_reg_bus_addr(nc_scntl3));
+#endif
+
+ /*
+ ** Get the IDENTIFY message and the lun.
+ ** CALL @script(resel_lun)
+ */
+ tp->call_lun.l_cmd = cpu_to_scr(SCR_CALL);
+ tp->call_lun.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, resel_lun));
+
+ /*
+ ** Look for the lun control block of this nexus.
+ ** For i = 0 to 3
+ ** JUMP ^ IFTRUE (MASK (i, 3)), @(next_lcb)
+ */
+ for (i = 0 ; i < 4 ; i++) {
+ tp->jump_lcb[i].l_cmd =
+ cpu_to_scr((SCR_JUMP ^ IFTRUE (MASK (i, 3))));
+ tp->jump_lcb[i].l_paddr =
+ cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_identify));
+ }
+
+ /*
+ ** Link this target control block to the JUMP chain.
+ */
+ np->jump_tcb[th].l_paddr = cpu_to_scr(vtobus (&tp->jump_tcb));
+
+ /*
+ ** These assert's should be moved at driver initialisations.
+ */
+#ifdef SCSI_NCR_BIG_ENDIAN
+ BUG_ON(((offsetof(struct ncr_reg, nc_sxfer) ^
+ offsetof(struct tcb , sval )) &3) != 3);
+ BUG_ON(((offsetof(struct ncr_reg, nc_scntl3) ^
+ offsetof(struct tcb , wval )) &3) != 3);
+#else
+ BUG_ON(((offsetof(struct ncr_reg, nc_sxfer) ^
+ offsetof(struct tcb , sval )) &3) != 0);
+ BUG_ON(((offsetof(struct ncr_reg, nc_scntl3) ^
+ offsetof(struct tcb , wval )) &3) != 0);
+#endif
+}
+
+
+/*------------------------------------------------------------------------
+** Lun control block allocation and initialization.
+**------------------------------------------------------------------------
+** This data structure is allocated and initialized after a SCSI
+** command has been successfully completed for this target/lun.
+**------------------------------------------------------------------------
+*/
+static struct lcb *ncr_alloc_lcb (struct ncb *np, u_char tn, u_char ln)
+{
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
+ ncrcmd copy_4 = np->features & FE_PFEN ? SCR_COPY(4) : SCR_COPY_F(4);
+ int lh = ln & 3;
+
+ /*
+ ** Already done, return.
+ */
+ if (lp)
+ return lp;
+
+ /*
+ ** Allocate the lcb.
+ */
+ lp = m_calloc_dma(sizeof(struct lcb), "LCB");
+ if (!lp)
+ goto fail;
+ memset(lp, 0, sizeof(*lp));
+ tp->lp[ln] = lp;
+
+ /*
+ ** Initialize the target control block if not yet.
+ */
+ if (!tp->jump_tcb.l_cmd)
+ ncr_init_tcb(np, tn);
+
+ /*
+ ** Initialize the CCB queue headers.
+ */
+ INIT_LIST_HEAD(&lp->free_ccbq);
+ INIT_LIST_HEAD(&lp->busy_ccbq);
+ INIT_LIST_HEAD(&lp->wait_ccbq);
+ INIT_LIST_HEAD(&lp->skip_ccbq);
+
+ /*
+ ** Set max CCBs to 1 and use the default 1 entry
+ ** jump table by default.
+ */
+ lp->maxnxs = 1;
+ lp->jump_ccb = &lp->jump_ccb_0;
+ lp->p_jump_ccb = cpu_to_scr(vtobus(lp->jump_ccb));
+
+ /*
+ ** Initilialyze the reselect script:
+ **
+ ** Jump to next lcb if SFBR does not match this lun.
+ ** Load TEMP with the CCB direct jump table bus address.
+ ** Get the SIMPLE TAG message and the tag.
+ **
+ ** JUMP IF (SFBR != #lun#), @(next lcb)
+ ** COPY @(lp->p_jump_ccb), @(temp)
+ ** JUMP @script(resel_notag)
+ */
+ lp->jump_lcb.l_cmd =
+ cpu_to_scr((SCR_JUMP ^ IFFALSE (MASK (0x80+ln, 0xff))));
+ lp->jump_lcb.l_paddr = tp->jump_lcb[lh].l_paddr;
+
+ lp->load_jump_ccb[0] = cpu_to_scr(copy_4);
+ lp->load_jump_ccb[1] = cpu_to_scr(vtobus (&lp->p_jump_ccb));
+ lp->load_jump_ccb[2] = cpu_to_scr(ncr_reg_bus_addr(nc_temp));
+
+ lp->jump_tag.l_cmd = cpu_to_scr(SCR_JUMP);
+ lp->jump_tag.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, resel_notag));
+
+ /*
+ ** Link this lun control block to the JUMP chain.
+ */
+ tp->jump_lcb[lh].l_paddr = cpu_to_scr(vtobus (&lp->jump_lcb));
+
+ /*
+ ** Initialize command queuing control.
+ */
+ lp->busyccbs = 1;
+ lp->queuedccbs = 1;
+ lp->queuedepth = 1;
+fail:
+ return lp;
+}
+
+
+/*------------------------------------------------------------------------
+** Lun control block setup on INQUIRY data received.
+**------------------------------------------------------------------------
+** We only support WIDE, SYNC for targets and CMDQ for logical units.
+** This setup is done on each INQUIRY since we are expecting user
+** will play with CHANGE DEFINITION commands. :-)
+**------------------------------------------------------------------------
+*/
+static struct lcb *ncr_setup_lcb (struct ncb *np, struct scsi_device *sdev)
+{
+ unsigned char tn = sdev->id, ln = sdev->lun;
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
+
+ /* If no lcb, try to allocate it. */
+ if (!lp && !(lp = ncr_alloc_lcb(np, tn, ln)))
+ goto fail;
+
+ /*
+ ** If unit supports tagged commands, allocate the
+ ** CCB JUMP table if not yet.
+ */
+ if (sdev->tagged_supported && lp->jump_ccb == &lp->jump_ccb_0) {
+ int i;
+ lp->jump_ccb = m_calloc_dma(256, "JUMP_CCB");
+ if (!lp->jump_ccb) {
+ lp->jump_ccb = &lp->jump_ccb_0;
+ goto fail;
+ }
+ lp->p_jump_ccb = cpu_to_scr(vtobus(lp->jump_ccb));
+ for (i = 0 ; i < 64 ; i++)
+ lp->jump_ccb[i] =
+ cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_i_t_l_q));
+ for (i = 0 ; i < MAX_TAGS ; i++)
+ lp->cb_tags[i] = i;
+ lp->maxnxs = MAX_TAGS;
+ lp->tags_stime = ktime_get(3*HZ);
+ ncr_setup_tags (np, sdev);
+ }
+
+
+fail:
+ return lp;
+}
+
+/*==========================================================
+**
+**
+** Build Scatter Gather Block
+**
+**
+**==========================================================
+**
+** The transfer area may be scattered among
+** several non adjacent physical pages.
+**
+** We may use MAX_SCATTER blocks.
+**
+**----------------------------------------------------------
+*/
+
+/*
+** We try to reduce the number of interrupts caused
+** by unexpected phase changes due to disconnects.
+** A typical harddisk may disconnect before ANY block.
+** If we wanted to avoid unexpected phase changes at all
+** we had to use a break point every 512 bytes.
+** Of course the number of scatter/gather blocks is
+** limited.
+** Under Linux, the scatter/gatter blocks are provided by
+** the generic driver. We just have to copy addresses and
+** sizes to the data segment array.
+*/
+
+static int ncr_scatter_no_sglist(struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd)
+{
+ struct scr_tblmove *data = &cp->phys.data[MAX_SCATTER - 1];
+ int segment;
+
+ cp->data_len = cmd->request_bufflen;
+
+ if (cmd->request_bufflen) {
+ dma_addr_t baddr = map_scsi_single_data(np, cmd);
+ if (baddr) {
+ ncr_build_sge(np, data, baddr, cmd->request_bufflen);
+ segment = 1;
+ } else {
+ segment = -2;
+ }
+ } else {
+ segment = 0;
+ }
+
+ return segment;
+}
+
+static int ncr_scatter(struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd)
+{
+ int segment = 0;
+ int use_sg = (int) cmd->use_sg;
+
+ cp->data_len = 0;
+
+ if (!use_sg)
+ segment = ncr_scatter_no_sglist(np, cp, cmd);
+ else if ((use_sg = map_scsi_sg_data(np, cmd)) > 0) {
+ struct scatterlist *scatter = (struct scatterlist *)cmd->buffer;
+ struct scr_tblmove *data;
+
+ if (use_sg > MAX_SCATTER) {
+ unmap_scsi_data(np, cmd);
+ return -1;
+ }
+
+ data = &cp->phys.data[MAX_SCATTER - use_sg];
+
+ for (segment = 0; segment < use_sg; segment++) {
+ dma_addr_t baddr = sg_dma_address(&scatter[segment]);
+ unsigned int len = sg_dma_len(&scatter[segment]);
+
+ ncr_build_sge(np, &data[segment], baddr, len);
+ cp->data_len += len;
+ }
+ } else {
+ segment = -2;
+ }
+
+ return segment;
+}
+
+/*==========================================================
+**
+**
+** Test the bus snoop logic :-(
+**
+** Has to be called with interrupts disabled.
+**
+**
+**==========================================================
+*/
+
+static int __init ncr_regtest (struct ncb* np)
+{
+ register volatile u32 data;
+ /*
+ ** ncr registers may NOT be cached.
+ ** write 0xffffffff to a read only register area,
+ ** and try to read it back.
+ */
+ data = 0xffffffff;
+ OUTL_OFF(offsetof(struct ncr_reg, nc_dstat), data);
+ data = INL_OFF(offsetof(struct ncr_reg, nc_dstat));
+#if 1
+ if (data == 0xffffffff) {
+#else
+ if ((data & 0xe2f0fffd) != 0x02000080) {
+#endif
+ printk ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n",
+ (unsigned) data);
+ return (0x10);
+ }
+ return (0);
+}
+
+static int __init ncr_snooptest (struct ncb* np)
+{
+ u32 ncr_rd, ncr_wr, ncr_bk, host_rd, host_wr, pc;
+ int i, err=0;
+ if (np->reg) {
+ err |= ncr_regtest (np);
+ if (err)
+ return (err);
+ }
+
+ /* init */
+ pc = NCB_SCRIPTH_PHYS (np, snooptest);
+ host_wr = 1;
+ ncr_wr = 2;
+ /*
+ ** Set memory and register.
+ */
+ np->ncr_cache = cpu_to_scr(host_wr);
+ OUTL (nc_temp, ncr_wr);
+ /*
+ ** Start script (exchange values)
+ */
+ OUTL_DSP (pc);
+ /*
+ ** Wait 'til done (with timeout)
+ */
+ for (i=0; i<NCR_SNOOP_TIMEOUT; i++)
+ if (INB(nc_istat) & (INTF|SIP|DIP))
+ break;
+ /*
+ ** Save termination position.
+ */
+ pc = INL (nc_dsp);
+ /*
+ ** Read memory and register.
+ */
+ host_rd = scr_to_cpu(np->ncr_cache);
+ ncr_rd = INL (nc_scratcha);
+ ncr_bk = INL (nc_temp);
+ /*
+ ** Reset ncr chip
+ */
+ ncr_chip_reset(np, 100);
+ /*
+ ** check for timeout
+ */
+ if (i>=NCR_SNOOP_TIMEOUT) {
+ printk ("CACHE TEST FAILED: timeout.\n");
+ return (0x20);
+ }
+ /*
+ ** Check termination position.
+ */
+ if (pc != NCB_SCRIPTH_PHYS (np, snoopend)+8) {
+ printk ("CACHE TEST FAILED: script execution failed.\n");
+ printk ("start=%08lx, pc=%08lx, end=%08lx\n",
+ (u_long) NCB_SCRIPTH_PHYS (np, snooptest), (u_long) pc,
+ (u_long) NCB_SCRIPTH_PHYS (np, snoopend) +8);
+ return (0x40);
+ }
+ /*
+ ** Show results.
+ */
+ if (host_wr != ncr_rd) {
+ printk ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n",
+ (int) host_wr, (int) ncr_rd);
+ err |= 1;
+ }
+ if (host_rd != ncr_wr) {
+ printk ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n",
+ (int) ncr_wr, (int) host_rd);
+ err |= 2;
+ }
+ if (ncr_bk != ncr_wr) {
+ printk ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n",
+ (int) ncr_wr, (int) ncr_bk);
+ err |= 4;
+ }
+ return (err);
+}
+
+/*==========================================================
+**
+** Determine the ncr's clock frequency.
+** This is essential for the negotiation
+** of the synchronous transfer rate.
+**
+**==========================================================
+**
+** Note: we have to return the correct value.
+** THERE IS NO SAVE DEFAULT VALUE.
+**
+** Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock.
+** 53C860 and 53C875 rev. 1 support fast20 transfers but
+** do not have a clock doubler and so are provided with a
+** 80 MHz clock. All other fast20 boards incorporate a doubler
+** and so should be delivered with a 40 MHz clock.
+** The future fast40 chips (895/895) use a 40 Mhz base clock
+** and provide a clock quadrupler (160 Mhz). The code below
+** tries to deal as cleverly as possible with all this stuff.
+**
+**----------------------------------------------------------
+*/
+
+/*
+ * Select NCR SCSI clock frequency
+ */
+static void ncr_selectclock(struct ncb *np, u_char scntl3)
+{
+ if (np->multiplier < 2) {
+ OUTB(nc_scntl3, scntl3);
+ return;
+ }
+
+ if (bootverbose >= 2)
+ printk ("%s: enabling clock multiplier\n", ncr_name(np));
+
+ OUTB(nc_stest1, DBLEN); /* Enable clock multiplier */
+ if (np->multiplier > 2) { /* Poll bit 5 of stest4 for quadrupler */
+ int i = 20;
+ while (!(INB(nc_stest4) & LCKFRQ) && --i > 0)
+ udelay(20);
+ if (!i)
+ printk("%s: the chip cannot lock the frequency\n", ncr_name(np));
+ } else /* Wait 20 micro-seconds for doubler */
+ udelay(20);
+ OUTB(nc_stest3, HSC); /* Halt the scsi clock */
+ OUTB(nc_scntl3, scntl3);
+ OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */
+ OUTB(nc_stest3, 0x00); /* Restart scsi clock */
+}
+
+
+/*
+ * calculate NCR SCSI clock frequency (in KHz)
+ */
+static unsigned __init ncrgetfreq (struct ncb *np, int gen)
+{
+ unsigned ms = 0;
+ char count = 0;
+
+ /*
+ * Measure GEN timer delay in order
+ * to calculate SCSI clock frequency
+ *
+ * This code will never execute too
+ * many loop iterations (if DELAY is
+ * reasonably correct). It could get
+ * too low a delay (too high a freq.)
+ * if the CPU is slow executing the
+ * loop for some reason (an NMI, for
+ * example). For this reason we will
+ * if multiple measurements are to be
+ * performed trust the higher delay
+ * (lower frequency returned).
+ */
+ OUTB (nc_stest1, 0); /* make sure clock doubler is OFF */
+ OUTW (nc_sien , 0); /* mask all scsi interrupts */
+ (void) INW (nc_sist); /* clear pending scsi interrupt */
+ OUTB (nc_dien , 0); /* mask all dma interrupts */
+ (void) INW (nc_sist); /* another one, just to be sure :) */
+ OUTB (nc_scntl3, 4); /* set pre-scaler to divide by 3 */
+ OUTB (nc_stime1, 0); /* disable general purpose timer */
+ OUTB (nc_stime1, gen); /* set to nominal delay of 1<<gen * 125us */
+ while (!(INW(nc_sist) & GEN) && ms++ < 100000) {
+ for (count = 0; count < 10; count ++)
+ udelay(100); /* count ms */
+ }
+ OUTB (nc_stime1, 0); /* disable general purpose timer */
+ /*
+ * set prescaler to divide by whatever 0 means
+ * 0 ought to choose divide by 2, but appears
+ * to set divide by 3.5 mode in my 53c810 ...
+ */
+ OUTB (nc_scntl3, 0);
+
+ if (bootverbose >= 2)
+ printk ("%s: Delay (GEN=%d): %u msec\n", ncr_name(np), gen, ms);
+ /*
+ * adjust for prescaler, and convert into KHz
+ */
+ return ms ? ((1 << gen) * 4340) / ms : 0;
+}
+
+/*
+ * Get/probe NCR SCSI clock frequency
+ */
+static void __init ncr_getclock (struct ncb *np, int mult)
+{
+ unsigned char scntl3 = INB(nc_scntl3);
+ unsigned char stest1 = INB(nc_stest1);
+ unsigned f1;
+
+ np->multiplier = 1;
+ f1 = 40000;
+
+ /*
+ ** True with 875 or 895 with clock multiplier selected
+ */
+ if (mult > 1 && (stest1 & (DBLEN+DBLSEL)) == DBLEN+DBLSEL) {
+ if (bootverbose >= 2)
+ printk ("%s: clock multiplier found\n", ncr_name(np));
+ np->multiplier = mult;
+ }
+
+ /*
+ ** If multiplier not found or scntl3 not 7,5,3,
+ ** reset chip and get frequency from general purpose timer.
+ ** Otherwise trust scntl3 BIOS setting.
+ */
+ if (np->multiplier != mult || (scntl3 & 7) < 3 || !(scntl3 & 1)) {
+ unsigned f2;
+
+ ncr_chip_reset(np, 5);
+
+ (void) ncrgetfreq (np, 11); /* throw away first result */
+ f1 = ncrgetfreq (np, 11);
+ f2 = ncrgetfreq (np, 11);
+
+ if(bootverbose)
+ printk ("%s: NCR clock is %uKHz, %uKHz\n", ncr_name(np), f1, f2);
+
+ if (f1 > f2) f1 = f2; /* trust lower result */
+
+ if (f1 < 45000) f1 = 40000;
+ else if (f1 < 55000) f1 = 50000;
+ else f1 = 80000;
+
+ if (f1 < 80000 && mult > 1) {
+ if (bootverbose >= 2)
+ printk ("%s: clock multiplier assumed\n", ncr_name(np));
+ np->multiplier = mult;
+ }
+ } else {
+ if ((scntl3 & 7) == 3) f1 = 40000;
+ else if ((scntl3 & 7) == 5) f1 = 80000;
+ else f1 = 160000;
+
+ f1 /= np->multiplier;
+ }
+
+ /*
+ ** Compute controller synchronous parameters.
+ */
+ f1 *= np->multiplier;
+ np->clock_khz = f1;
+}
+
+/*===================== LINUX ENTRY POINTS SECTION ==========================*/
+
+static int ncr53c8xx_slave_alloc(struct scsi_device *device)
+{
+ struct Scsi_Host *host = device->host;
+ struct ncb *np = ((struct host_data *) host->hostdata)->ncb;
+ struct tcb *tp = &np->target[device->id];
+ tp->starget = device->sdev_target;
+
+ return 0;
+}
+
+static int ncr53c8xx_slave_configure(struct scsi_device *device)
+{
+ struct Scsi_Host *host = device->host;
+ struct ncb *np = ((struct host_data *) host->hostdata)->ncb;
+ struct tcb *tp = &np->target[device->id];
+ struct lcb *lp = tp->lp[device->lun];
+ int numtags, depth_to_use;
+
+ ncr_setup_lcb(np, device);
+
+ /*
+ ** Select queue depth from driver setup.
+ ** Donnot use more than configured by user.
+ ** Use at least 2.
+ ** Donnot use more than our maximum.
+ */
+ numtags = device_queue_depth(np->unit, device->id, device->lun);
+ if (numtags > tp->usrtags)
+ numtags = tp->usrtags;
+ if (!device->tagged_supported)
+ numtags = 1;
+ depth_to_use = numtags;
+ if (depth_to_use < 2)
+ depth_to_use = 2;
+ if (depth_to_use > MAX_TAGS)
+ depth_to_use = MAX_TAGS;
+
+ scsi_adjust_queue_depth(device,
+ (device->tagged_supported ?
+ MSG_SIMPLE_TAG : 0),
+ depth_to_use);
+
+ /*
+ ** Since the queue depth is not tunable under Linux,
+ ** we need to know this value in order not to
+ ** announce stupid things to user.
+ **
+ ** XXX(hch): As of Linux 2.6 it certainly _is_ tunable..
+ ** In fact we just tuned it, or did I miss
+ ** something important? :)
+ */
+ if (lp) {
+ lp->numtags = lp->maxtags = numtags;
+ lp->scdev_depth = depth_to_use;
+ }
+ ncr_setup_tags (np, device);
+
+#ifdef DEBUG_NCR53C8XX
+ printk("ncr53c8xx_select_queue_depth: host=%d, id=%d, lun=%d, depth=%d\n",
+ np->unit, device->id, device->lun, depth_to_use);
+#endif
+
+ if (spi_support_sync(device->sdev_target) &&
+ !spi_initial_dv(device->sdev_target))
+ spi_dv_device(device);
+ return 0;
+}
+
+static int ncr53c8xx_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+{
+ struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
+ unsigned long flags;
+ int sts;
+
+#ifdef DEBUG_NCR53C8XX
+printk("ncr53c8xx_queue_command\n");
+#endif
+
+ cmd->scsi_done = done;
+ cmd->host_scribble = NULL;
+ cmd->__data_mapped = 0;
+ cmd->__data_mapping = 0;
+
+ spin_lock_irqsave(&np->smp_lock, flags);
+
+ if ((sts = ncr_queue_command(np, cmd)) != DID_OK) {
+ cmd->result = ScsiResult(sts, 0);
+#ifdef DEBUG_NCR53C8XX
+printk("ncr53c8xx : command not queued - result=%d\n", sts);
+#endif
+ }
+#ifdef DEBUG_NCR53C8XX
+ else
+printk("ncr53c8xx : command successfully queued\n");
+#endif
+
+ spin_unlock_irqrestore(&np->smp_lock, flags);
+
+ if (sts != DID_OK) {
+ unmap_scsi_data(np, cmd);
+ done(cmd);
+ sts = 0;
+ }
+
+ return sts;
+}
+
+irqreturn_t ncr53c8xx_intr(int irq, void *dev_id, struct pt_regs * regs)
+{
+ unsigned long flags;
+ struct Scsi_Host *shost = (struct Scsi_Host *)dev_id;
+ struct host_data *host_data = (struct host_data *)shost->hostdata;
+ struct ncb *np = host_data->ncb;
+ struct scsi_cmnd *done_list;
+
+#ifdef DEBUG_NCR53C8XX
+ printk("ncr53c8xx : interrupt received\n");
+#endif
+
+ if (DEBUG_FLAGS & DEBUG_TINY) printk ("[");
+
+ spin_lock_irqsave(&np->smp_lock, flags);
+ ncr_exception(np);
+ done_list = np->done_list;
+ np->done_list = NULL;
+ spin_unlock_irqrestore(&np->smp_lock, flags);
+
+ if (DEBUG_FLAGS & DEBUG_TINY) printk ("]\n");
+
+ if (done_list)
+ ncr_flush_done_cmds(done_list);
+ return IRQ_HANDLED;
+}
+
+static void ncr53c8xx_timeout(unsigned long npref)
+{
+ struct ncb *np = (struct ncb *) npref;
+ unsigned long flags;
+ struct scsi_cmnd *done_list;
+
+ spin_lock_irqsave(&np->smp_lock, flags);
+ ncr_timeout(np);
+ done_list = np->done_list;
+ np->done_list = NULL;
+ spin_unlock_irqrestore(&np->smp_lock, flags);
+
+ if (done_list)
+ ncr_flush_done_cmds(done_list);
+}
+
+static int ncr53c8xx_bus_reset(struct scsi_cmnd *cmd)
+{
+ struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
+ int sts;
+ unsigned long flags;
+ struct scsi_cmnd *done_list;
+
+ /*
+ * If the mid-level driver told us reset is synchronous, it seems
+ * that we must call the done() callback for the involved command,
+ * even if this command was not queued to the low-level driver,
+ * before returning SUCCESS.
+ */
+
+ spin_lock_irqsave(&np->smp_lock, flags);
+ sts = ncr_reset_bus(np, cmd, 1);
+
+ done_list = np->done_list;
+ np->done_list = NULL;
+ spin_unlock_irqrestore(&np->smp_lock, flags);
+
+ ncr_flush_done_cmds(done_list);
+
+ return sts;
+}
+
+#if 0 /* unused and broken */
+static int ncr53c8xx_abort(struct scsi_cmnd *cmd)
+{
+ struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
+ int sts;
+ unsigned long flags;
+ struct scsi_cmnd *done_list;
+
+#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
+ printk("ncr53c8xx_abort: pid=%lu serial_number=%ld serial_number_at_timeout=%ld\n",
+ cmd->pid, cmd->serial_number, cmd->serial_number_at_timeout);
+#else
+ printk("ncr53c8xx_abort: command pid %lu\n", cmd->pid);
+#endif
+
+ NCR_LOCK_NCB(np, flags);
+
+#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
+ /*
+ * We have to just ignore abort requests in some situations.
+ */
+ if (cmd->serial_number != cmd->serial_number_at_timeout) {
+ sts = SCSI_ABORT_NOT_RUNNING;
+ goto out;
+ }
+#endif
+
+ sts = ncr_abort_command(np, cmd);
+out:
+ done_list = np->done_list;
+ np->done_list = NULL;
+ NCR_UNLOCK_NCB(np, flags);
+
+ ncr_flush_done_cmds(done_list);
+
+ return sts;
+}
+#endif
+
+
+/*
+** Scsi command waiting list management.
+**
+** It may happen that we cannot insert a scsi command into the start queue,
+** in the following circumstances.
+** Too few preallocated ccb(s),
+** maxtags < cmd_per_lun of the Linux host control block,
+** etc...
+** Such scsi commands are inserted into a waiting list.
+** When a scsi command complete, we try to requeue the commands of the
+** waiting list.
+*/
+
+#define next_wcmd host_scribble
+
+static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd)
+{
+ struct scsi_cmnd *wcmd;
+
+#ifdef DEBUG_WAITING_LIST
+ printk("%s: cmd %lx inserted into waiting list\n", ncr_name(np), (u_long) cmd);
+#endif
+ cmd->next_wcmd = NULL;
+ if (!(wcmd = np->waiting_list)) np->waiting_list = cmd;
+ else {
+ while ((wcmd->next_wcmd) != 0)
+ wcmd = (struct scsi_cmnd *) wcmd->next_wcmd;
+ wcmd->next_wcmd = (char *) cmd;
+ }
+}
+
+static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd)
+{
+ struct scsi_cmnd **pcmd = &np->waiting_list;
+
+ while (*pcmd) {
+ if (cmd == *pcmd) {
+ if (to_remove) {
+ *pcmd = (struct scsi_cmnd *) cmd->next_wcmd;
+ cmd->next_wcmd = NULL;
+ }
+#ifdef DEBUG_WAITING_LIST
+ printk("%s: cmd %lx retrieved from waiting list\n", ncr_name(np), (u_long) cmd);
+#endif
+ return cmd;
+ }
+ pcmd = (struct scsi_cmnd **) &(*pcmd)->next_wcmd;
+ }
+ return NULL;
+}
+
+static void process_waiting_list(struct ncb *np, int sts)
+{
+ struct scsi_cmnd *waiting_list, *wcmd;
+
+ waiting_list = np->waiting_list;
+ np->waiting_list = NULL;
+
+#ifdef DEBUG_WAITING_LIST
+ if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_long) waiting_list, sts);
+#endif
+ while ((wcmd = waiting_list) != 0) {
+ waiting_list = (struct scsi_cmnd *) wcmd->next_wcmd;
+ wcmd->next_wcmd = NULL;
+ if (sts == DID_OK) {
+#ifdef DEBUG_WAITING_LIST
+ printk("%s: cmd %lx trying to requeue\n", ncr_name(np), (u_long) wcmd);
+#endif
+ sts = ncr_queue_command(np, wcmd);
+ }
+ if (sts != DID_OK) {
+#ifdef DEBUG_WAITING_LIST
+ printk("%s: cmd %lx done forced sts=%d\n", ncr_name(np), (u_long) wcmd, sts);
+#endif
+ wcmd->result = ScsiResult(sts, 0);
+ ncr_queue_done_cmd(np, wcmd);
+ }
+ }
+}
+
+#undef next_wcmd
+
+static ssize_t show_ncr53c8xx_revision(struct class_device *dev, char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ struct host_data *host_data = (struct host_data *)host->hostdata;
+
+ return snprintf(buf, 20, "0x%x\n", host_data->ncb->revision_id);
+}
+
+static struct class_device_attribute ncr53c8xx_revision_attr = {
+ .attr = { .name = "revision", .mode = S_IRUGO, },
+ .show = show_ncr53c8xx_revision,
+};
+
+static struct class_device_attribute *ncr53c8xx_host_attrs[] = {
+ &ncr53c8xx_revision_attr,
+ NULL
+};
+
+/*==========================================================
+**
+** Boot command line.
+**
+**==========================================================
+*/
+#ifdef MODULE
+char *ncr53c8xx; /* command line passed by insmod */
+module_param(ncr53c8xx, charp, 0);
+#endif
+
+static int __init ncr53c8xx_setup(char *str)
+{
+ return sym53c8xx__setup(str);
+}
+
+#ifndef MODULE
+__setup("ncr53c8xx=", ncr53c8xx_setup);
+#endif
+
+
+/*
+ * Host attach and initialisations.
+ *
+ * Allocate host data and ncb structure.
+ * Request IO region and remap MMIO region.
+ * Do chip initialization.
+ * If all is OK, install interrupt handling and
+ * start the timer daemon.
+ */
+struct Scsi_Host * __init ncr_attach(struct scsi_host_template *tpnt,
+ int unit, struct ncr_device *device)
+{
+ struct host_data *host_data;
+ struct ncb *np = NULL;
+ struct Scsi_Host *instance = NULL;
+ u_long flags = 0;
+ int i;
+
+ if (!tpnt->name)
+ tpnt->name = SCSI_NCR_DRIVER_NAME;
+ if (!tpnt->shost_attrs)
+ tpnt->shost_attrs = ncr53c8xx_host_attrs;
+
+ tpnt->queuecommand = ncr53c8xx_queue_command;
+ tpnt->slave_configure = ncr53c8xx_slave_configure;
+ tpnt->slave_alloc = ncr53c8xx_slave_alloc;
+ tpnt->eh_bus_reset_handler = ncr53c8xx_bus_reset;
+ tpnt->can_queue = SCSI_NCR_CAN_QUEUE;
+ tpnt->this_id = 7;
+ tpnt->sg_tablesize = SCSI_NCR_SG_TABLESIZE;
+ tpnt->cmd_per_lun = SCSI_NCR_CMD_PER_LUN;
+ tpnt->use_clustering = ENABLE_CLUSTERING;
+
+ if (device->differential)
+ driver_setup.diff_support = device->differential;
+
+ printk(KERN_INFO "ncr53c720-%d: rev 0x%x irq %d\n",
+ unit, device->chip.revision_id, device->slot.irq);
+
+ instance = scsi_host_alloc(tpnt, sizeof(*host_data));
+ if (!instance)
+ goto attach_error;
+ host_data = (struct host_data *) instance->hostdata;
+
+ np = __m_calloc_dma(device->dev, sizeof(struct ncb), "NCB");
+ if (!np)
+ goto attach_error;
+ spin_lock_init(&np->smp_lock);
+ np->dev = device->dev;
+ np->p_ncb = vtobus(np);
+ host_data->ncb = np;
+
+ np->ccb = m_calloc_dma(sizeof(struct ccb), "CCB");
+ if (!np->ccb)
+ goto attach_error;
+
+ /* Store input information in the host data structure. */
+ np->unit = unit;
+ np->verbose = driver_setup.verbose;
+ sprintf(np->inst_name, "ncr53c720-%d", np->unit);
+ np->revision_id = device->chip.revision_id;
+ np->features = device->chip.features;
+ np->clock_divn = device->chip.nr_divisor;
+ np->maxoffs = device->chip.offset_max;
+ np->maxburst = device->chip.burst_max;
+ np->myaddr = device->host_id;
+
+ /* Allocate SCRIPTS areas. */
+ np->script0 = m_calloc_dma(sizeof(struct script), "SCRIPT");
+ if (!np->script0)
+ goto attach_error;
+ np->scripth0 = m_calloc_dma(sizeof(struct scripth), "SCRIPTH");
+ if (!np->scripth0)
+ goto attach_error;
+
+ init_timer(&np->timer);
+ np->timer.data = (unsigned long) np;
+ np->timer.function = ncr53c8xx_timeout;
+
+ /* Try to map the controller chip to virtual and physical memory. */
+
+ np->paddr = device->slot.base;
+ np->paddr2 = (np->features & FE_RAM) ? device->slot.base_2 : 0;
+
+ if (device->slot.base_v)
+ np->vaddr = device->slot.base_v;
+ else
+ np->vaddr = ioremap(device->slot.base_c, 128);
+
+ if (!np->vaddr) {
+ printk(KERN_ERR
+ "%s: can't map memory mapped IO region\n",ncr_name(np));
+ goto attach_error;
+ } else {
+ if (bootverbose > 1)
+ printk(KERN_INFO
+ "%s: using memory mapped IO at virtual address 0x%lx\n", ncr_name(np), (u_long) np->vaddr);
+ }
+
+ /* Make the controller's registers available. Now the INB INW INL
+ * OUTB OUTW OUTL macros can be used safely.
+ */
+
+ np->reg = (struct ncr_reg __iomem *)np->vaddr;
+
+ /* Do chip dependent initialization. */
+ ncr_prepare_setting(np);
+
+ if (np->paddr2 && sizeof(struct script) > 4096) {
+ np->paddr2 = 0;
+ printk(KERN_WARNING "%s: script too large, NOT using on chip RAM.\n",
+ ncr_name(np));
+ }
+
+ instance->max_channel = 0;
+ instance->this_id = np->myaddr;
+ instance->max_id = np->maxwide ? 16 : 8;
+ instance->max_lun = SCSI_NCR_MAX_LUN;
+ instance->base = (unsigned long) np->reg;
+ instance->irq = device->slot.irq;
+ instance->unique_id = device->slot.base;
+ instance->dma_channel = 0;
+ instance->cmd_per_lun = MAX_TAGS;
+ instance->can_queue = (MAX_START-4);
+ /* This can happen if you forget to call ncr53c8xx_init from
+ * your module_init */
+ BUG_ON(!ncr53c8xx_transport_template);
+ instance->transportt = ncr53c8xx_transport_template;
+ scsi_set_device(instance, device->dev);
+
+ /* Patch script to physical addresses */
+ ncr_script_fill(&script0, &scripth0);
+
+ np->scripth = np->scripth0;
+ np->p_scripth = vtobus(np->scripth);
+ np->p_script = (np->paddr2) ? np->paddr2 : vtobus(np->script0);
+
+ ncr_script_copy_and_bind(np, (ncrcmd *) &script0,
+ (ncrcmd *) np->script0, sizeof(struct script));
+ ncr_script_copy_and_bind(np, (ncrcmd *) &scripth0,
+ (ncrcmd *) np->scripth0, sizeof(struct scripth));
+ np->ccb->p_ccb = vtobus (np->ccb);
+
+ /* Patch the script for LED support. */
+
+ if (np->features & FE_LED0) {
+ np->script0->idle[0] =
+ cpu_to_scr(SCR_REG_REG(gpreg, SCR_OR, 0x01));
+ np->script0->reselected[0] =
+ cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe));
+ np->script0->start[0] =
+ cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe));
+ }
+
+ /*
+ * Look for the target control block of this nexus.
+ * For i = 0 to 3
+ * JUMP ^ IFTRUE (MASK (i, 3)), @(next_lcb)
+ */
+ for (i = 0 ; i < 4 ; i++) {
+ np->jump_tcb[i].l_cmd =
+ cpu_to_scr((SCR_JUMP ^ IFTRUE (MASK (i, 3))));
+ np->jump_tcb[i].l_paddr =
+ cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_target));
+ }
+
+ ncr_chip_reset(np, 100);
+
+ /* Now check the cache handling of the chipset. */
+
+ if (ncr_snooptest(np)) {
+ printk(KERN_ERR "CACHE INCORRECTLY CONFIGURED.\n");
+ goto attach_error;
+ }
+
+ /* Install the interrupt handler. */
+ np->irq = device->slot.irq;
+
+ /* Initialize the fixed part of the default ccb. */
+ ncr_init_ccb(np, np->ccb);
+
+ /*
+ * After SCSI devices have been opened, we cannot reset the bus
+ * safely, so we do it here. Interrupt handler does the real work.
+ * Process the reset exception if interrupts are not enabled yet.
+ * Then enable disconnects.
+ */
+ spin_lock_irqsave(&np->smp_lock, flags);
+ if (ncr_reset_scsi_bus(np, 0, driver_setup.settle_delay) != 0) {
+ printk(KERN_ERR "%s: FATAL ERROR: CHECK SCSI BUS - CABLES, TERMINATION, DEVICE POWER etc.!\n", ncr_name(np));
+
+ spin_unlock_irqrestore(&np->smp_lock, flags);
+ goto attach_error;
+ }
+ ncr_exception(np);
+
+ np->disc = 1;
+
+ /*
+ * The middle-level SCSI driver does not wait for devices to settle.
+ * Wait synchronously if more than 2 seconds.
+ */
+ if (driver_setup.settle_delay > 2) {
+ printk(KERN_INFO "%s: waiting %d seconds for scsi devices to settle...\n",
+ ncr_name(np), driver_setup.settle_delay);
+ mdelay(1000 * driver_setup.settle_delay);
+ }
+
+ /* start the timeout daemon */
+ np->lasttime=0;
+ ncr_timeout (np);
+
+ /* use SIMPLE TAG messages by default */
+#ifdef SCSI_NCR_ALWAYS_SIMPLE_TAG
+ np->order = M_SIMPLE_TAG;
+#endif
+
+ spin_unlock_irqrestore(&np->smp_lock, flags);
+
+ return instance;
+
+ attach_error:
+ if (!instance)
+ return NULL;
+ printk(KERN_INFO "%s: detaching...\n", ncr_name(np));
+ if (!np)
+ goto unregister;
+ if (np->scripth0)
+ m_free_dma(np->scripth0, sizeof(struct scripth), "SCRIPTH");
+ if (np->script0)
+ m_free_dma(np->script0, sizeof(struct script), "SCRIPT");
+ if (np->ccb)
+ m_free_dma(np->ccb, sizeof(struct ccb), "CCB");
+ m_free_dma(np, sizeof(struct ncb), "NCB");
+ host_data->ncb = NULL;
+
+ unregister:
+ scsi_host_put(instance);
+
+ return NULL;
+}
+
+
+int ncr53c8xx_release(struct Scsi_Host *host)
+{
+ struct host_data *host_data;
+#ifdef DEBUG_NCR53C8XX
+ printk("ncr53c8xx: release\n");
+#endif
+ if (!host)
+ return 1;
+ host_data = (struct host_data *)host->hostdata;
+ if (host_data && host_data->ncb)
+ ncr_detach(host_data->ncb);
+ return 1;
+}
+
+static void ncr53c8xx_set_period(struct scsi_target *starget, int period)
+{
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct ncb *np = ((struct host_data *)shost->hostdata)->ncb;
+ struct tcb *tp = &np->target[starget->id];
+
+ if (period > np->maxsync)
+ period = np->maxsync;
+ else if (period < np->minsync)
+ period = np->minsync;
+
+ tp->usrsync = period;
+
+ ncr_negotiate(np, tp);
+}
+
+static void ncr53c8xx_set_offset(struct scsi_target *starget, int offset)
+{
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct ncb *np = ((struct host_data *)shost->hostdata)->ncb;
+ struct tcb *tp = &np->target[starget->id];
+
+ if (offset > np->maxoffs)
+ offset = np->maxoffs;
+ else if (offset < 0)
+ offset = 0;
+
+ tp->maxoffs = offset;
+
+ ncr_negotiate(np, tp);
+}
+
+static void ncr53c8xx_set_width(struct scsi_target *starget, int width)
+{
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct ncb *np = ((struct host_data *)shost->hostdata)->ncb;
+ struct tcb *tp = &np->target[starget->id];
+
+ if (width > np->maxwide)
+ width = np->maxwide;
+ else if (width < 0)
+ width = 0;
+
+ tp->usrwide = width;
+
+ ncr_negotiate(np, tp);
+}
+
+static void ncr53c8xx_get_signalling(struct Scsi_Host *shost)
+{
+ struct ncb *np = ((struct host_data *)shost->hostdata)->ncb;
+ enum spi_signal_type type;
+
+ switch (np->scsi_mode) {
+ case SMODE_SE:
+ type = SPI_SIGNAL_SE;
+ break;
+ case SMODE_HVD:
+ type = SPI_SIGNAL_HVD;
+ break;
+ default:
+ type = SPI_SIGNAL_UNKNOWN;
+ break;
+ }
+ spi_signalling(shost) = type;
+}
+
+static struct spi_function_template ncr53c8xx_transport_functions = {
+ .set_period = ncr53c8xx_set_period,
+ .show_period = 1,
+ .set_offset = ncr53c8xx_set_offset,
+ .show_offset = 1,
+ .set_width = ncr53c8xx_set_width,
+ .show_width = 1,
+ .get_signalling = ncr53c8xx_get_signalling,
+};
+
+int __init ncr53c8xx_init(void)
+{
+ ncr53c8xx_transport_template = spi_attach_transport(&ncr53c8xx_transport_functions);
+ if (!ncr53c8xx_transport_template)
+ return -ENODEV;
+ return 0;
+}
+
+void ncr53c8xx_exit(void)
+{
+ spi_release_transport(ncr53c8xx_transport_template);
+}
