Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
new file mode 100644
index 0000000..53c9b93
--- /dev/null
+++ b/drivers/scsi/dpt_i2o.c
@@ -0,0 +1,3381 @@
+/***************************************************************************
+ dpti.c - description
+ -------------------
+ begin : Thu Sep 7 2000
+ copyright : (C) 2000 by Adaptec
+
+ July 30, 2001 First version being submitted
+ for inclusion in the kernel. V2.4
+
+ See Documentation/scsi/dpti.txt for history, notes, license info
+ and credits
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ ***************************************************************************/
+/***************************************************************************
+ * Sat Dec 20 2003 Go Taniguchi <go@turbolinux.co.jp>
+ - Support 2.6 kernel and DMA-mapping
+ - ioctl fix for raid tools
+ - use schedule_timeout in long long loop
+ **************************************************************************/
+
+/*#define DEBUG 1 */
+/*#define UARTDELAY 1 */
+
+/* On the real kernel ADDR32 should always be zero for 2.4. GFP_HIGH allocates
+ high pages. Keep the macro around because of the broken unmerged ia64 tree */
+
+#define ADDR32 (0)
+
+#include <linux/version.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Deanna Bonds, with _lots_ of help from Mark Salyzyn");
+MODULE_DESCRIPTION("Adaptec I2O RAID Driver");
+
+////////////////////////////////////////////////////////////////
+
+#include <linux/ioctl.h> /* For SCSI-Passthrough */
+#include <asm/uaccess.h>
+
+#include <linux/stat.h>
+#include <linux/slab.h> /* for kmalloc() */
+#include <linux/config.h> /* for CONFIG_PCI */
+#include <linux/pci.h> /* for PCI support */
+#include <linux/proc_fs.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h> /* for udelay */
+#include <linux/interrupt.h>
+#include <linux/kernel.h> /* for printk */
+#include <linux/sched.h>
+#include <linux/reboot.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+
+#include <asm/processor.h> /* for boot_cpu_data */
+#include <asm/pgtable.h>
+#include <asm/io.h> /* for virt_to_bus, etc. */
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+
+#include "dpt/dptsig.h"
+#include "dpti.h"
+
+/*============================================================================
+ * Create a binary signature - this is read by dptsig
+ * Needed for our management apps
+ *============================================================================
+ */
+static dpt_sig_S DPTI_sig = {
+ {'d', 'P', 't', 'S', 'i', 'G'}, SIG_VERSION,
+#ifdef __i386__
+ PROC_INTEL, PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM,
+#elif defined(__ia64__)
+ PROC_INTEL, PROC_IA64,
+#elif defined(__sparc__)
+ PROC_ULTRASPARC, PROC_ULTRASPARC,
+#elif defined(__alpha__)
+ PROC_ALPHA, PROC_ALPHA,
+#else
+ (-1),(-1),
+#endif
+ FT_HBADRVR, 0, OEM_DPT, OS_LINUX, CAP_OVERLAP, DEV_ALL,
+ ADF_ALL_SC5, 0, 0, DPT_VERSION, DPT_REVISION, DPT_SUBREVISION,
+ DPT_MONTH, DPT_DAY, DPT_YEAR, "Adaptec Linux I2O RAID Driver"
+};
+
+
+
+
+/*============================================================================
+ * Globals
+ *============================================================================
+ */
+
+static DECLARE_MUTEX(adpt_configuration_lock);
+
+static struct i2o_sys_tbl *sys_tbl = NULL;
+static int sys_tbl_ind = 0;
+static int sys_tbl_len = 0;
+
+static adpt_hba* hbas[DPTI_MAX_HBA];
+static adpt_hba* hba_chain = NULL;
+static int hba_count = 0;
+
+static struct file_operations adpt_fops = {
+ .ioctl = adpt_ioctl,
+ .open = adpt_open,
+ .release = adpt_close
+};
+
+#ifdef REBOOT_NOTIFIER
+static struct notifier_block adpt_reboot_notifier =
+{
+ adpt_reboot_event,
+ NULL,
+ 0
+};
+#endif
+
+/* Structures and definitions for synchronous message posting.
+ * See adpt_i2o_post_wait() for description
+ * */
+struct adpt_i2o_post_wait_data
+{
+ int status;
+ u32 id;
+ adpt_wait_queue_head_t *wq;
+ struct adpt_i2o_post_wait_data *next;
+};
+
+static struct adpt_i2o_post_wait_data *adpt_post_wait_queue = NULL;
+static u32 adpt_post_wait_id = 0;
+static DEFINE_SPINLOCK(adpt_post_wait_lock);
+
+
+/*============================================================================
+ * Functions
+ *============================================================================
+ */
+
+static u8 adpt_read_blink_led(adpt_hba* host)
+{
+ if(host->FwDebugBLEDflag_P != 0) {
+ if( readb(host->FwDebugBLEDflag_P) == 0xbc ){
+ return readb(host->FwDebugBLEDvalue_P);
+ }
+ }
+ return 0;
+}
+
+/*============================================================================
+ * Scsi host template interface functions
+ *============================================================================
+ */
+
+static struct pci_device_id dptids[] = {
+ { PCI_DPT_VENDOR_ID, PCI_DPT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ { PCI_DPT_VENDOR_ID, PCI_DPT_RAPTOR_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci,dptids);
+
+static int adpt_detect(struct scsi_host_template* sht)
+{
+ struct pci_dev *pDev = NULL;
+ adpt_hba* pHba;
+
+ adpt_init();
+
+ PINFO("Detecting Adaptec I2O RAID controllers...\n");
+
+ /* search for all Adatpec I2O RAID cards */
+ while ((pDev = pci_find_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) {
+ if(pDev->device == PCI_DPT_DEVICE_ID ||
+ pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){
+ if(adpt_install_hba(sht, pDev) ){
+ PERROR("Could not Init an I2O RAID device\n");
+ PERROR("Will not try to detect others.\n");
+ return hba_count-1;
+ }
+ }
+ }
+
+ /* In INIT state, Activate IOPs */
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ // Activate does get status , init outbound, and get hrt
+ if (adpt_i2o_activate_hba(pHba) < 0) {
+ adpt_i2o_delete_hba(pHba);
+ }
+ }
+
+
+ /* Active IOPs in HOLD state */
+
+rebuild_sys_tab:
+ if (hba_chain == NULL)
+ return 0;
+
+ /*
+ * If build_sys_table fails, we kill everything and bail
+ * as we can't init the IOPs w/o a system table
+ */
+ if (adpt_i2o_build_sys_table() < 0) {
+ adpt_i2o_sys_shutdown();
+ return 0;
+ }
+
+ PDEBUG("HBA's in HOLD state\n");
+
+ /* If IOP don't get online, we need to rebuild the System table */
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ if (adpt_i2o_online_hba(pHba) < 0) {
+ adpt_i2o_delete_hba(pHba);
+ goto rebuild_sys_tab;
+ }
+ }
+
+ /* Active IOPs now in OPERATIONAL state */
+ PDEBUG("HBA's in OPERATIONAL state\n");
+
+ printk("dpti: If you have a lot of devices this could take a few minutes.\n");
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ printk(KERN_INFO"%s: Reading the hardware resource table.\n", pHba->name);
+ if (adpt_i2o_lct_get(pHba) < 0){
+ adpt_i2o_delete_hba(pHba);
+ continue;
+ }
+
+ if (adpt_i2o_parse_lct(pHba) < 0){
+ adpt_i2o_delete_hba(pHba);
+ continue;
+ }
+ adpt_inquiry(pHba);
+ }
+
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ if( adpt_scsi_register(pHba,sht) < 0){
+ adpt_i2o_delete_hba(pHba);
+ continue;
+ }
+ pHba->initialized = TRUE;
+ pHba->state &= ~DPTI_STATE_RESET;
+ }
+
+ // Register our control device node
+ // nodes will need to be created in /dev to access this
+ // the nodes can not be created from within the driver
+ if (hba_count && register_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER, &adpt_fops)) {
+ adpt_i2o_sys_shutdown();
+ return 0;
+ }
+ return hba_count;
+}
+
+
+/*
+ * scsi_unregister will be called AFTER we return.
+ */
+static int adpt_release(struct Scsi_Host *host)
+{
+ adpt_hba* pHba = (adpt_hba*) host->hostdata[0];
+// adpt_i2o_quiesce_hba(pHba);
+ adpt_i2o_delete_hba(pHba);
+ scsi_unregister(host);
+ return 0;
+}
+
+
+static void adpt_inquiry(adpt_hba* pHba)
+{
+ u32 msg[14];
+ u32 *mptr;
+ u32 *lenptr;
+ int direction;
+ int scsidir;
+ u32 len;
+ u32 reqlen;
+ u8* buf;
+ u8 scb[16];
+ s32 rcode;
+
+ memset(msg, 0, sizeof(msg));
+ buf = (u8*)kmalloc(80,GFP_KERNEL|ADDR32);
+ if(!buf){
+ printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name);
+ return;
+ }
+ memset((void*)buf, 0, 36);
+
+ len = 36;
+ direction = 0x00000000;
+ scsidir =0x40000000; // DATA IN (iop<--dev)
+
+ reqlen = 14; // SINGLE SGE
+ /* Stick the headers on */
+ msg[0] = reqlen<<16 | SGL_OFFSET_12;
+ msg[1] = (0xff<<24|HOST_TID<<12|ADAPTER_TID);
+ msg[2] = 0;
+ msg[3] = 0;
+ // Adaptec/DPT Private stuff
+ msg[4] = I2O_CMD_SCSI_EXEC|DPT_ORGANIZATION_ID<<16;
+ msg[5] = ADAPTER_TID | 1<<16 /* Interpret*/;
+ /* Direction, disconnect ok | sense data | simple queue , CDBLen */
+ // I2O_SCB_FLAG_ENABLE_DISCONNECT |
+ // I2O_SCB_FLAG_SIMPLE_QUEUE_TAG |
+ // I2O_SCB_FLAG_SENSE_DATA_IN_MESSAGE;
+ msg[6] = scsidir|0x20a00000| 6 /* cmd len*/;
+
+ mptr=msg+7;
+
+ memset(scb, 0, sizeof(scb));
+ // Write SCSI command into the message - always 16 byte block
+ scb[0] = INQUIRY;
+ scb[1] = 0;
+ scb[2] = 0;
+ scb[3] = 0;
+ scb[4] = 36;
+ scb[5] = 0;
+ // Don't care about the rest of scb
+
+ memcpy(mptr, scb, sizeof(scb));
+ mptr+=4;
+ lenptr=mptr++; /* Remember me - fill in when we know */
+
+ /* Now fill in the SGList and command */
+ *lenptr = len;
+ *mptr++ = 0xD0000000|direction|len;
+ *mptr++ = virt_to_bus(buf);
+
+ // Send it on it's way
+ rcode = adpt_i2o_post_wait(pHba, msg, reqlen<<2, 120);
+ if (rcode != 0) {
+ sprintf(pHba->detail, "Adaptec I2O RAID");
+ printk(KERN_INFO "%s: Inquiry Error (%d)\n",pHba->name,rcode);
+ if (rcode != -ETIME && rcode != -EINTR)
+ kfree(buf);
+ } else {
+ memset(pHba->detail, 0, sizeof(pHba->detail));
+ memcpy(&(pHba->detail), "Vendor: Adaptec ", 16);
+ memcpy(&(pHba->detail[16]), " Model: ", 8);
+ memcpy(&(pHba->detail[24]), (u8*) &buf[16], 16);
+ memcpy(&(pHba->detail[40]), " FW: ", 4);
+ memcpy(&(pHba->detail[44]), (u8*) &buf[32], 4);
+ pHba->detail[48] = '\0'; /* precautionary */
+ kfree(buf);
+ }
+ adpt_i2o_status_get(pHba);
+ return ;
+}
+
+
+static int adpt_slave_configure(struct scsi_device * device)
+{
+ struct Scsi_Host *host = device->host;
+ adpt_hba* pHba;
+
+ pHba = (adpt_hba *) host->hostdata[0];
+
+ if (host->can_queue && device->tagged_supported) {
+ scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG,
+ host->can_queue - 1);
+ } else {
+ scsi_adjust_queue_depth(device, 0, 1);
+ }
+ return 0;
+}
+
+static int adpt_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
+{
+ adpt_hba* pHba = NULL;
+ struct adpt_device* pDev = NULL; /* dpt per device information */
+ ulong timeout = jiffies + (TMOUT_SCSI*HZ);
+
+ cmd->scsi_done = done;
+ /*
+ * SCSI REQUEST_SENSE commands will be executed automatically by the
+ * Host Adapter for any errors, so they should not be executed
+ * explicitly unless the Sense Data is zero indicating that no error
+ * occurred.
+ */
+
+ if ((cmd->cmnd[0] == REQUEST_SENSE) && (cmd->sense_buffer[0] != 0)) {
+ cmd->result = (DID_OK << 16);
+ cmd->scsi_done(cmd);
+ return 0;
+ }
+
+ pHba = (adpt_hba*)cmd->device->host->hostdata[0];
+ if (!pHba) {
+ return FAILED;
+ }
+
+ rmb();
+ /*
+ * TODO: I need to block here if I am processing ioctl cmds
+ * but if the outstanding cmds all finish before the ioctl,
+ * the scsi-core will not know to start sending cmds to me again.
+ * I need to a way to restart the scsi-cores queues or should I block
+ * calling scsi_done on the outstanding cmds instead
+ * for now we don't set the IOCTL state
+ */
+ if(((pHba->state) & DPTI_STATE_IOCTL) || ((pHba->state) & DPTI_STATE_RESET)) {
+ pHba->host->last_reset = jiffies;
+ pHba->host->resetting = 1;
+ return 1;
+ }
+
+ if(cmd->eh_state != SCSI_STATE_QUEUED){
+ // If we are not doing error recovery
+ mod_timer(&cmd->eh_timeout, timeout);
+ }
+
+ // TODO if the cmd->device if offline then I may need to issue a bus rescan
+ // followed by a get_lct to see if the device is there anymore
+ if((pDev = (struct adpt_device*) (cmd->device->hostdata)) == NULL) {
+ /*
+ * First command request for this device. Set up a pointer
+ * to the device structure. This should be a TEST_UNIT_READY
+ * command from scan_scsis_single.
+ */
+ if ((pDev = adpt_find_device(pHba, (u32)cmd->device->channel, (u32)cmd->device->id, (u32)cmd->device->lun)) == NULL) {
+ // TODO: if any luns are at this bus, scsi id then fake a TEST_UNIT_READY and INQUIRY response
+ // with type 7F (for all luns less than the max for this bus,id) so the lun scan will continue.
+ cmd->result = (DID_NO_CONNECT << 16);
+ cmd->scsi_done(cmd);
+ return 0;
+ }
+ cmd->device->hostdata = pDev;
+ }
+ pDev->pScsi_dev = cmd->device;
+
+ /*
+ * If we are being called from when the device is being reset,
+ * delay processing of the command until later.
+ */
+ if (pDev->state & DPTI_DEV_RESET ) {
+ return FAILED;
+ }
+ return adpt_scsi_to_i2o(pHba, cmd, pDev);
+}
+
+static int adpt_bios_param(struct scsi_device *sdev, struct block_device *dev,
+ sector_t capacity, int geom[])
+{
+ int heads=-1;
+ int sectors=-1;
+ int cylinders=-1;
+
+ // *** First lets set the default geometry ****
+
+ // If the capacity is less than ox2000
+ if (capacity < 0x2000 ) { // floppy
+ heads = 18;
+ sectors = 2;
+ }
+ // else if between 0x2000 and 0x20000
+ else if (capacity < 0x20000) {
+ heads = 64;
+ sectors = 32;
+ }
+ // else if between 0x20000 and 0x40000
+ else if (capacity < 0x40000) {
+ heads = 65;
+ sectors = 63;
+ }
+ // else if between 0x4000 and 0x80000
+ else if (capacity < 0x80000) {
+ heads = 128;
+ sectors = 63;
+ }
+ // else if greater than 0x80000
+ else {
+ heads = 255;
+ sectors = 63;
+ }
+ cylinders = sector_div(capacity, heads * sectors);
+
+ // Special case if CDROM
+ if(sdev->type == 5) { // CDROM
+ heads = 252;
+ sectors = 63;
+ cylinders = 1111;
+ }
+
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+
+ PDEBUG("adpt_bios_param: exit\n");
+ return 0;
+}
+
+
+static const char *adpt_info(struct Scsi_Host *host)
+{
+ adpt_hba* pHba;
+
+ pHba = (adpt_hba *) host->hostdata[0];
+ return (char *) (pHba->detail);
+}
+
+static int adpt_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
+ int length, int inout)
+{
+ struct adpt_device* d;
+ int id;
+ int chan;
+ int len = 0;
+ int begin = 0;
+ int pos = 0;
+ adpt_hba* pHba;
+ int unit;
+
+ *start = buffer;
+ if (inout == TRUE) {
+ /*
+ * The user has done a write and wants us to take the
+ * data in the buffer and do something with it.
+ * proc_scsiwrite calls us with inout = 1
+ *
+ * Read data from buffer (writing to us) - NOT SUPPORTED
+ */
+ return -EINVAL;
+ }
+
+ /*
+ * inout = 0 means the user has done a read and wants information
+ * returned, so we write information about the cards into the buffer
+ * proc_scsiread() calls us with inout = 0
+ */
+
+ // Find HBA (host bus adapter) we are looking for
+ down(&adpt_configuration_lock);
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ if (pHba->host == host) {
+ break; /* found adapter */
+ }
+ }
+ up(&adpt_configuration_lock);
+ if (pHba == NULL) {
+ return 0;
+ }
+ host = pHba->host;
+
+ len = sprintf(buffer , "Adaptec I2O RAID Driver Version: %s\n\n", DPT_I2O_VERSION);
+ len += sprintf(buffer+len, "%s\n", pHba->detail);
+ len += sprintf(buffer+len, "SCSI Host=scsi%d Control Node=/dev/%s irq=%d\n",
+ pHba->host->host_no, pHba->name, host->irq);
+ len += sprintf(buffer+len, "\tpost fifo size = %d\n\treply fifo size = %d\n\tsg table size = %d\n\n",
+ host->can_queue, (int) pHba->reply_fifo_size , host->sg_tablesize);
+
+ pos = begin + len;
+
+ /* CHECKPOINT */
+ if(pos > offset + length) {
+ goto stop_output;
+ }
+ if(pos <= offset) {
+ /*
+ * If we haven't even written to where we last left
+ * off (the last time we were called), reset the
+ * beginning pointer.
+ */
+ len = 0;
+ begin = pos;
+ }
+ len += sprintf(buffer+len, "Devices:\n");
+ for(chan = 0; chan < MAX_CHANNEL; chan++) {
+ for(id = 0; id < MAX_ID; id++) {
+ d = pHba->channel[chan].device[id];
+ while(d){
+ len += sprintf(buffer+len,"\t%-24.24s", d->pScsi_dev->vendor);
+ len += sprintf(buffer+len," Rev: %-8.8s\n", d->pScsi_dev->rev);
+ pos = begin + len;
+
+
+ /* CHECKPOINT */
+ if(pos > offset + length) {
+ goto stop_output;
+ }
+ if(pos <= offset) {
+ len = 0;
+ begin = pos;
+ }
+
+ unit = d->pI2o_dev->lct_data.tid;
+ len += sprintf(buffer+len, "\tTID=%d, (Channel=%d, Target=%d, Lun=%d) (%s)\n\n",
+ unit, (int)d->scsi_channel, (int)d->scsi_id, (int)d->scsi_lun,
+ scsi_device_online(d->pScsi_dev)? "online":"offline");
+ pos = begin + len;
+
+ /* CHECKPOINT */
+ if(pos > offset + length) {
+ goto stop_output;
+ }
+ if(pos <= offset) {
+ len = 0;
+ begin = pos;
+ }
+
+ d = d->next_lun;
+ }
+ }
+ }
+
+ /*
+ * begin is where we last checked our position with regards to offset
+ * begin is always less than offset. len is relative to begin. It
+ * is the number of bytes written past begin
+ *
+ */
+stop_output:
+ /* stop the output and calculate the correct length */
+ *(buffer + len) = '\0';
+
+ *start = buffer + (offset - begin); /* Start of wanted data */
+ len -= (offset - begin);
+ if(len > length) {
+ len = length;
+ } else if(len < 0){
+ len = 0;
+ **start = '\0';
+ }
+ return len;
+}
+
+
+/*===========================================================================
+ * Error Handling routines
+ *===========================================================================
+ */
+
+static int adpt_abort(struct scsi_cmnd * cmd)
+{
+ adpt_hba* pHba = NULL; /* host bus adapter structure */
+ struct adpt_device* dptdevice; /* dpt per device information */
+ u32 msg[5];
+ int rcode;
+
+ if(cmd->serial_number == 0){
+ return FAILED;
+ }
+ pHba = (adpt_hba*) cmd->device->host->hostdata[0];
+ printk(KERN_INFO"%s: Trying to Abort cmd=%ld\n",pHba->name, cmd->serial_number);
+ if ((dptdevice = (void*) (cmd->device->hostdata)) == NULL) {
+ printk(KERN_ERR "%s: Unable to abort: No device in cmnd\n",pHba->name);
+ return FAILED;
+ }
+
+ memset(msg, 0, sizeof(msg));
+ msg[0] = FIVE_WORD_MSG_SIZE|SGL_OFFSET_0;
+ msg[1] = I2O_CMD_SCSI_ABORT<<24|HOST_TID<<12|dptdevice->tid;
+ msg[2] = 0;
+ msg[3]= 0;
+ msg[4] = (u32)cmd;
+ if( (rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER)) != 0){
+ if(rcode == -EOPNOTSUPP ){
+ printk(KERN_INFO"%s: Abort cmd not supported\n",pHba->name);
+ return FAILED;
+ }
+ printk(KERN_INFO"%s: Abort cmd=%ld failed.\n",pHba->name, cmd->serial_number);
+ return FAILED;
+ }
+ printk(KERN_INFO"%s: Abort cmd=%ld complete.\n",pHba->name, cmd->serial_number);
+ return SUCCESS;
+}
+
+
+#define I2O_DEVICE_RESET 0x27
+// This is the same for BLK and SCSI devices
+// NOTE this is wrong in the i2o.h definitions
+// This is not currently supported by our adapter but we issue it anyway
+static int adpt_device_reset(struct scsi_cmnd* cmd)
+{
+ adpt_hba* pHba;
+ u32 msg[4];
+ u32 rcode;
+ int old_state;
+ struct adpt_device* d = (void*) cmd->device->hostdata;
+
+ pHba = (void*) cmd->device->host->hostdata[0];
+ printk(KERN_INFO"%s: Trying to reset device\n",pHba->name);
+ if (!d) {
+ printk(KERN_INFO"%s: Reset Device: Device Not found\n",pHba->name);
+ return FAILED;
+ }
+ memset(msg, 0, sizeof(msg));
+ msg[0] = FOUR_WORD_MSG_SIZE|SGL_OFFSET_0;
+ msg[1] = (I2O_DEVICE_RESET<<24|HOST_TID<<12|d->tid);
+ msg[2] = 0;
+ msg[3] = 0;
+
+ old_state = d->state;
+ d->state |= DPTI_DEV_RESET;
+ if( (rcode = adpt_i2o_post_wait(pHba, (void*)msg,sizeof(msg), FOREVER)) ){
+ d->state = old_state;
+ if(rcode == -EOPNOTSUPP ){
+ printk(KERN_INFO"%s: Device reset not supported\n",pHba->name);
+ return FAILED;
+ }
+ printk(KERN_INFO"%s: Device reset failed\n",pHba->name);
+ return FAILED;
+ } else {
+ d->state = old_state;
+ printk(KERN_INFO"%s: Device reset successful\n",pHba->name);
+ return SUCCESS;
+ }
+}
+
+
+#define I2O_HBA_BUS_RESET 0x87
+// This version of bus reset is called by the eh_error handler
+static int adpt_bus_reset(struct scsi_cmnd* cmd)
+{
+ adpt_hba* pHba;
+ u32 msg[4];
+
+ pHba = (adpt_hba*)cmd->device->host->hostdata[0];
+ memset(msg, 0, sizeof(msg));
+ printk(KERN_WARNING"%s: Bus reset: SCSI Bus %d: tid: %d\n",pHba->name, cmd->device->channel,pHba->channel[cmd->device->channel].tid );
+ msg[0] = FOUR_WORD_MSG_SIZE|SGL_OFFSET_0;
+ msg[1] = (I2O_HBA_BUS_RESET<<24|HOST_TID<<12|pHba->channel[cmd->device->channel].tid);
+ msg[2] = 0;
+ msg[3] = 0;
+ if(adpt_i2o_post_wait(pHba, (void*)msg,sizeof(msg), FOREVER) ){
+ printk(KERN_WARNING"%s: Bus reset failed.\n",pHba->name);
+ return FAILED;
+ } else {
+ printk(KERN_WARNING"%s: Bus reset success.\n",pHba->name);
+ return SUCCESS;
+ }
+}
+
+// This version of reset is called by the eh_error_handler
+static int adpt_reset(struct scsi_cmnd* cmd)
+{
+ adpt_hba* pHba;
+ int rcode;
+ pHba = (adpt_hba*)cmd->device->host->hostdata[0];
+ printk(KERN_WARNING"%s: Hba Reset: scsi id %d: tid: %d\n",pHba->name,cmd->device->channel,pHba->channel[cmd->device->channel].tid );
+ rcode = adpt_hba_reset(pHba);
+ if(rcode == 0){
+ printk(KERN_WARNING"%s: HBA reset complete\n",pHba->name);
+ return SUCCESS;
+ } else {
+ printk(KERN_WARNING"%s: HBA reset failed (%x)\n",pHba->name, rcode);
+ return FAILED;
+ }
+}
+
+// This version of reset is called by the ioctls and indirectly from eh_error_handler via adpt_reset
+static int adpt_hba_reset(adpt_hba* pHba)
+{
+ int rcode;
+
+ pHba->state |= DPTI_STATE_RESET;
+
+ // Activate does get status , init outbound, and get hrt
+ if ((rcode=adpt_i2o_activate_hba(pHba)) < 0) {
+ printk(KERN_ERR "%s: Could not activate\n", pHba->name);
+ adpt_i2o_delete_hba(pHba);
+ return rcode;
+ }
+
+ if ((rcode=adpt_i2o_build_sys_table()) < 0) {
+ adpt_i2o_delete_hba(pHba);
+ return rcode;
+ }
+ PDEBUG("%s: in HOLD state\n",pHba->name);
+
+ if ((rcode=adpt_i2o_online_hba(pHba)) < 0) {
+ adpt_i2o_delete_hba(pHba);
+ return rcode;
+ }
+ PDEBUG("%s: in OPERATIONAL state\n",pHba->name);
+
+ if ((rcode=adpt_i2o_lct_get(pHba)) < 0){
+ adpt_i2o_delete_hba(pHba);
+ return rcode;
+ }
+
+ if ((rcode=adpt_i2o_reparse_lct(pHba)) < 0){
+ adpt_i2o_delete_hba(pHba);
+ return rcode;
+ }
+ pHba->state &= ~DPTI_STATE_RESET;
+
+ adpt_fail_posted_scbs(pHba);
+ return 0; /* return success */
+}
+
+/*===========================================================================
+ *
+ *===========================================================================
+ */
+
+
+static void adpt_i2o_sys_shutdown(void)
+{
+ adpt_hba *pHba, *pNext;
+ struct adpt_i2o_post_wait_data *p1, *p2;
+
+ printk(KERN_INFO"Shutting down Adaptec I2O controllers.\n");
+ printk(KERN_INFO" This could take a few minutes if there are many devices attached\n");
+ /* Delete all IOPs from the controller chain */
+ /* They should have already been released by the
+ * scsi-core
+ */
+ for (pHba = hba_chain; pHba; pHba = pNext) {
+ pNext = pHba->next;
+ adpt_i2o_delete_hba(pHba);
+ }
+
+ /* Remove any timedout entries from the wait queue. */
+ p2 = NULL;
+// spin_lock_irqsave(&adpt_post_wait_lock, flags);
+ /* Nothing should be outstanding at this point so just
+ * free them
+ */
+ for(p1 = adpt_post_wait_queue; p1; p2 = p1, p1 = p2->next) {
+ kfree(p1);
+ }
+// spin_unlock_irqrestore(&adpt_post_wait_lock, flags);
+ adpt_post_wait_queue = NULL;
+
+ printk(KERN_INFO "Adaptec I2O controllers down.\n");
+}
+
+/*
+ * reboot/shutdown notification.
+ *
+ * - Quiesce each IOP in the system
+ *
+ */
+
+#ifdef REBOOT_NOTIFIER
+static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p)
+{
+
+ if(code != SYS_RESTART && code != SYS_HALT && code != SYS_POWER_OFF)
+ return NOTIFY_DONE;
+
+ adpt_i2o_sys_shutdown();
+
+ return NOTIFY_DONE;
+}
+#endif
+
+
+static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev)
+{
+
+ adpt_hba* pHba = NULL;
+ adpt_hba* p = NULL;
+ ulong base_addr0_phys = 0;
+ ulong base_addr1_phys = 0;
+ u32 hba_map0_area_size = 0;
+ u32 hba_map1_area_size = 0;
+ void __iomem *base_addr_virt = NULL;
+ void __iomem *msg_addr_virt = NULL;
+
+ int raptorFlag = FALSE;
+ int i;
+
+ if(pci_enable_device(pDev)) {
+ return -EINVAL;
+ }
+ pci_set_master(pDev);
+ if (pci_set_dma_mask(pDev, 0xffffffffffffffffULL) &&
+ pci_set_dma_mask(pDev, 0xffffffffULL))
+ return -EINVAL;
+
+ base_addr0_phys = pci_resource_start(pDev,0);
+ hba_map0_area_size = pci_resource_len(pDev,0);
+
+ // Check if standard PCI card or single BAR Raptor
+ if(pDev->device == PCI_DPT_DEVICE_ID){
+ if(pDev->subsystem_device >=0xc032 && pDev->subsystem_device <= 0xc03b){
+ // Raptor card with this device id needs 4M
+ hba_map0_area_size = 0x400000;
+ } else { // Not Raptor - it is a PCI card
+ if(hba_map0_area_size > 0x100000 ){
+ hba_map0_area_size = 0x100000;
+ }
+ }
+ } else {// Raptor split BAR config
+ // Use BAR1 in this configuration
+ base_addr1_phys = pci_resource_start(pDev,1);
+ hba_map1_area_size = pci_resource_len(pDev,1);
+ raptorFlag = TRUE;
+ }
+
+
+ base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size);
+ if (!base_addr_virt) {
+ PERROR("dpti: adpt_config_hba: io remap failed\n");
+ return -EINVAL;
+ }
+
+ if(raptorFlag == TRUE) {
+ msg_addr_virt = ioremap(base_addr1_phys, hba_map1_area_size );
+ if (!msg_addr_virt) {
+ PERROR("dpti: adpt_config_hba: io remap failed on BAR1\n");
+ iounmap(base_addr_virt);
+ return -EINVAL;
+ }
+ } else {
+ msg_addr_virt = base_addr_virt;
+ }
+
+ // Allocate and zero the data structure
+ pHba = kmalloc(sizeof(adpt_hba), GFP_KERNEL);
+ if( pHba == NULL) {
+ if(msg_addr_virt != base_addr_virt){
+ iounmap(msg_addr_virt);
+ }
+ iounmap(base_addr_virt);
+ return -ENOMEM;
+ }
+ memset(pHba, 0, sizeof(adpt_hba));
+
+ down(&adpt_configuration_lock);
+ for(i=0;i<DPTI_MAX_HBA;i++) {
+ if(hbas[i]==NULL) {
+ hbas[i]=pHba;
+ break;
+ }
+ }
+
+ if(hba_chain != NULL){
+ for(p = hba_chain; p->next; p = p->next);
+ p->next = pHba;
+ } else {
+ hba_chain = pHba;
+ }
+ pHba->next = NULL;
+ pHba->unit = hba_count;
+ sprintf(pHba->name, "dpti%d", i);
+ hba_count++;
+
+ up(&adpt_configuration_lock);
+
+ pHba->pDev = pDev;
+ pHba->base_addr_phys = base_addr0_phys;
+
+ // Set up the Virtual Base Address of the I2O Device
+ pHba->base_addr_virt = base_addr_virt;
+ pHba->msg_addr_virt = msg_addr_virt;
+ pHba->irq_mask = base_addr_virt+0x30;
+ pHba->post_port = base_addr_virt+0x40;
+ pHba->reply_port = base_addr_virt+0x44;
+
+ pHba->hrt = NULL;
+ pHba->lct = NULL;
+ pHba->lct_size = 0;
+ pHba->status_block = NULL;
+ pHba->post_count = 0;
+ pHba->state = DPTI_STATE_RESET;
+ pHba->pDev = pDev;
+ pHba->devices = NULL;
+
+ // Initializing the spinlocks
+ spin_lock_init(&pHba->state_lock);
+ spin_lock_init(&adpt_post_wait_lock);
+
+ if(raptorFlag == 0){
+ printk(KERN_INFO"Adaptec I2O RAID controller %d at %p size=%x irq=%d\n",
+ hba_count-1, base_addr_virt, hba_map0_area_size, pDev->irq);
+ } else {
+ printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d\n",hba_count-1, pDev->irq);
+ printk(KERN_INFO" BAR0 %p - size= %x\n",base_addr_virt,hba_map0_area_size);
+ printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size);
+ }
+
+ if (request_irq (pDev->irq, adpt_isr, SA_SHIRQ, pHba->name, pHba)) {
+ printk(KERN_ERR"%s: Couldn't register IRQ %d\n", pHba->name, pDev->irq);
+ adpt_i2o_delete_hba(pHba);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static void adpt_i2o_delete_hba(adpt_hba* pHba)
+{
+ adpt_hba* p1;
+ adpt_hba* p2;
+ struct i2o_device* d;
+ struct i2o_device* next;
+ int i;
+ int j;
+ struct adpt_device* pDev;
+ struct adpt_device* pNext;
+
+
+ down(&adpt_configuration_lock);
+ // scsi_unregister calls our adpt_release which
+ // does a quiese
+ if(pHba->host){
+ free_irq(pHba->host->irq, pHba);
+ }
+ for(i=0;i<DPTI_MAX_HBA;i++) {
+ if(hbas[i]==pHba) {
+ hbas[i] = NULL;
+ }
+ }
+ p2 = NULL;
+ for( p1 = hba_chain; p1; p2 = p1,p1=p1->next){
+ if(p1 == pHba) {
+ if(p2) {
+ p2->next = p1->next;
+ } else {
+ hba_chain = p1->next;
+ }
+ break;
+ }
+ }
+
+ hba_count--;
+ up(&adpt_configuration_lock);
+
+ iounmap(pHba->base_addr_virt);
+ if(pHba->msg_addr_virt != pHba->base_addr_virt){
+ iounmap(pHba->msg_addr_virt);
+ }
+ if(pHba->hrt) {
+ kfree(pHba->hrt);
+ }
+ if(pHba->lct){
+ kfree(pHba->lct);
+ }
+ if(pHba->status_block) {
+ kfree(pHba->status_block);
+ }
+ if(pHba->reply_pool){
+ kfree(pHba->reply_pool);
+ }
+
+ for(d = pHba->devices; d ; d = next){
+ next = d->next;
+ kfree(d);
+ }
+ for(i = 0 ; i < pHba->top_scsi_channel ; i++){
+ for(j = 0; j < MAX_ID; j++){
+ if(pHba->channel[i].device[j] != NULL){
+ for(pDev = pHba->channel[i].device[j]; pDev; pDev = pNext){
+ pNext = pDev->next_lun;
+ kfree(pDev);
+ }
+ }
+ }
+ }
+ kfree(pHba);
+
+ if(hba_count <= 0){
+ unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER);
+ }
+}
+
+
+static int adpt_init(void)
+{
+ int i;
+
+ printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
+ for (i = 0; i < DPTI_MAX_HBA; i++) {
+ hbas[i] = NULL;
+ }
+#ifdef REBOOT_NOTIFIER
+ register_reboot_notifier(&adpt_reboot_notifier);
+#endif
+
+ return 0;
+}
+
+
+static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun)
+{
+ struct adpt_device* d;
+
+ if(chan < 0 || chan >= MAX_CHANNEL)
+ return NULL;
+
+ if( pHba->channel[chan].device == NULL){
+ printk(KERN_DEBUG"Adaptec I2O RAID: Trying to find device before they are allocated\n");
+ return NULL;
+ }
+
+ d = pHba->channel[chan].device[id];
+ if(!d || d->tid == 0) {
+ return NULL;
+ }
+
+ /* If it is the only lun at that address then this should match*/
+ if(d->scsi_lun == lun){
+ return d;
+ }
+
+ /* else we need to look through all the luns */
+ for(d=d->next_lun ; d ; d = d->next_lun){
+ if(d->scsi_lun == lun){
+ return d;
+ }
+ }
+ return NULL;
+}
+
+
+static int adpt_i2o_post_wait(adpt_hba* pHba, u32* msg, int len, int timeout)
+{
+ // I used my own version of the WAIT_QUEUE_HEAD
+ // to handle some version differences
+ // When embedded in the kernel this could go back to the vanilla one
+ ADPT_DECLARE_WAIT_QUEUE_HEAD(adpt_wq_i2o_post);
+ int status = 0;
+ ulong flags = 0;
+ struct adpt_i2o_post_wait_data *p1, *p2;
+ struct adpt_i2o_post_wait_data *wait_data =
+ kmalloc(sizeof(struct adpt_i2o_post_wait_data),GFP_KERNEL);
+ adpt_wait_queue_t wait;
+
+ if(!wait_data){
+ return -ENOMEM;
+ }
+ /*
+ * The spin locking is needed to keep anyone from playing
+ * with the queue pointers and id while we do the same
+ */
+ spin_lock_irqsave(&adpt_post_wait_lock, flags);
+ // TODO we need a MORE unique way of getting ids
+ // to support async LCT get
+ wait_data->next = adpt_post_wait_queue;
+ adpt_post_wait_queue = wait_data;
+ adpt_post_wait_id++;
+ adpt_post_wait_id &= 0x7fff;
+ wait_data->id = adpt_post_wait_id;
+ spin_unlock_irqrestore(&adpt_post_wait_lock, flags);
+
+ wait_data->wq = &adpt_wq_i2o_post;
+ wait_data->status = -ETIMEDOUT;
+
+ // this code is taken from kernel/sched.c:interruptible_sleep_on_timeout
+ wait.task = current;
+ init_waitqueue_entry(&wait, current);
+ spin_lock_irqsave(&adpt_wq_i2o_post.lock, flags);
+ __add_wait_queue(&adpt_wq_i2o_post, &wait);
+ spin_unlock(&adpt_wq_i2o_post.lock);
+
+ msg[2] |= 0x80000000 | ((u32)wait_data->id);
+ timeout *= HZ;
+ if((status = adpt_i2o_post_this(pHba, msg, len)) == 0){
+ set_current_state(TASK_INTERRUPTIBLE);
+ if(pHba->host)
+ spin_unlock_irq(pHba->host->host_lock);
+ if (!timeout)
+ schedule();
+ else{
+ timeout = schedule_timeout(timeout);
+ if (timeout == 0) {
+ // I/O issued, but cannot get result in
+ // specified time. Freeing resorces is
+ // dangerous.
+ status = -ETIME;
+ }
+ }
+ if(pHba->host)
+ spin_lock_irq(pHba->host->host_lock);
+ }
+ spin_lock_irq(&adpt_wq_i2o_post.lock);
+ __remove_wait_queue(&adpt_wq_i2o_post, &wait);
+ spin_unlock_irqrestore(&adpt_wq_i2o_post.lock, flags);
+
+ if(status == -ETIMEDOUT){
+ printk(KERN_INFO"dpti%d: POST WAIT TIMEOUT\n",pHba->unit);
+ // We will have to free the wait_data memory during shutdown
+ return status;
+ }
+
+ /* Remove the entry from the queue. */
+ p2 = NULL;
+ spin_lock_irqsave(&adpt_post_wait_lock, flags);
+ for(p1 = adpt_post_wait_queue; p1; p2 = p1, p1 = p1->next) {
+ if(p1 == wait_data) {
+ if(p1->status == I2O_DETAIL_STATUS_UNSUPPORTED_FUNCTION ) {
+ status = -EOPNOTSUPP;
+ }
+ if(p2) {
+ p2->next = p1->next;
+ } else {
+ adpt_post_wait_queue = p1->next;
+ }
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&adpt_post_wait_lock, flags);
+
+ kfree(wait_data);
+
+ return status;
+}
+
+
+static s32 adpt_i2o_post_this(adpt_hba* pHba, u32* data, int len)
+{
+
+ u32 m = EMPTY_QUEUE;
+ u32 __iomem *msg;
+ ulong timeout = jiffies + 30*HZ;
+ do {
+ rmb();
+ m = readl(pHba->post_port);
+ if (m != EMPTY_QUEUE) {
+ break;
+ }
+ if(time_after(jiffies,timeout)){
+ printk(KERN_WARNING"dpti%d: Timeout waiting for message frame!\n", pHba->unit);
+ return -ETIMEDOUT;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ } while(m == EMPTY_QUEUE);
+
+ msg = pHba->msg_addr_virt + m;
+ memcpy_toio(msg, data, len);
+ wmb();
+
+ //post message
+ writel(m, pHba->post_port);
+ wmb();
+
+ return 0;
+}
+
+
+static void adpt_i2o_post_wait_complete(u32 context, int status)
+{
+ struct adpt_i2o_post_wait_data *p1 = NULL;
+ /*
+ * We need to search through the adpt_post_wait
+ * queue to see if the given message is still
+ * outstanding. If not, it means that the IOP
+ * took longer to respond to the message than we
+ * had allowed and timer has already expired.
+ * Not much we can do about that except log
+ * it for debug purposes, increase timeout, and recompile
+ *
+ * Lock needed to keep anyone from moving queue pointers
+ * around while we're looking through them.
+ */
+
+ context &= 0x7fff;
+
+ spin_lock(&adpt_post_wait_lock);
+ for(p1 = adpt_post_wait_queue; p1; p1 = p1->next) {
+ if(p1->id == context) {
+ p1->status = status;
+ spin_unlock(&adpt_post_wait_lock);
+ wake_up_interruptible(p1->wq);
+ return;
+ }
+ }
+ spin_unlock(&adpt_post_wait_lock);
+ // If this happens we lose commands that probably really completed
+ printk(KERN_DEBUG"dpti: Could Not find task %d in wait queue\n",context);
+ printk(KERN_DEBUG" Tasks in wait queue:\n");
+ for(p1 = adpt_post_wait_queue; p1; p1 = p1->next) {
+ printk(KERN_DEBUG" %d\n",p1->id);
+ }
+ return;
+}
+
+static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
+{
+ u32 msg[8];
+ u8* status;
+ u32 m = EMPTY_QUEUE ;
+ ulong timeout = jiffies + (TMOUT_IOPRESET*HZ);
+
+ if(pHba->initialized == FALSE) { // First time reset should be quick
+ timeout = jiffies + (25*HZ);
+ } else {
+ adpt_i2o_quiesce_hba(pHba);
+ }
+
+ do {
+ rmb();
+ m = readl(pHba->post_port);
+ if (m != EMPTY_QUEUE) {
+ break;
+ }
+ if(time_after(jiffies,timeout)){
+ printk(KERN_WARNING"Timeout waiting for message!\n");
+ return -ETIMEDOUT;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ } while (m == EMPTY_QUEUE);
+
+ status = (u8*)kmalloc(4, GFP_KERNEL|ADDR32);
+ if(status == NULL) {
+ adpt_send_nop(pHba, m);
+ printk(KERN_ERR"IOP reset failed - no free memory.\n");
+ return -ENOMEM;
+ }
+ memset(status,0,4);
+
+ msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
+ msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;
+ msg[2]=0;
+ msg[3]=0;
+ msg[4]=0;
+ msg[5]=0;
+ msg[6]=virt_to_bus(status);
+ msg[7]=0;
+
+ memcpy_toio(pHba->msg_addr_virt+m, msg, sizeof(msg));
+ wmb();
+ writel(m, pHba->post_port);
+ wmb();
+
+ while(*status == 0){
+ if(time_after(jiffies,timeout)){
+ printk(KERN_WARNING"%s: IOP Reset Timeout\n",pHba->name);
+ kfree(status);
+ return -ETIMEDOUT;
+ }
+ rmb();
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+
+ if(*status == 0x01 /*I2O_EXEC_IOP_RESET_IN_PROGRESS*/) {
+ PDEBUG("%s: Reset in progress...\n", pHba->name);
+ // Here we wait for message frame to become available
+ // indicated that reset has finished
+ do {
+ rmb();
+ m = readl(pHba->post_port);
+ if (m != EMPTY_QUEUE) {
+ break;
+ }
+ if(time_after(jiffies,timeout)){
+ printk(KERN_ERR "%s:Timeout waiting for IOP Reset.\n",pHba->name);
+ return -ETIMEDOUT;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ } while (m == EMPTY_QUEUE);
+ // Flush the offset
+ adpt_send_nop(pHba, m);
+ }
+ adpt_i2o_status_get(pHba);
+ if(*status == 0x02 ||
+ pHba->status_block->iop_state != ADAPTER_STATE_RESET) {
+ printk(KERN_WARNING"%s: Reset reject, trying to clear\n",
+ pHba->name);
+ } else {
+ PDEBUG("%s: Reset completed.\n", pHba->name);
+ }
+
+ kfree(status);
+#ifdef UARTDELAY
+ // This delay is to allow someone attached to the card through the debug UART to
+ // set up the dump levels that they want before the rest of the initialization sequence
+ adpt_delay(20000);
+#endif
+ return 0;
+}
+
+
+static int adpt_i2o_parse_lct(adpt_hba* pHba)
+{
+ int i;
+ int max;
+ int tid;
+ struct i2o_device *d;
+ i2o_lct *lct = pHba->lct;
+ u8 bus_no = 0;
+ s16 scsi_id;
+ s16 scsi_lun;
+ u32 buf[10]; // larger than 7, or 8 ...
+ struct adpt_device* pDev;
+
+ if (lct == NULL) {
+ printk(KERN_ERR "%s: LCT is empty???\n",pHba->name);
+ return -1;
+ }
+
+ max = lct->table_size;
+ max -= 3;
+ max /= 9;
+
+ for(i=0;i<max;i++) {
+ if( lct->lct_entry[i].user_tid != 0xfff){
+ /*
+ * If we have hidden devices, we need to inform the upper layers about
+ * the possible maximum id reference to handle device access when
+ * an array is disassembled. This code has no other purpose but to
+ * allow us future access to devices that are currently hidden
+ * behind arrays, hotspares or have not been configured (JBOD mode).
+ */
+ if( lct->lct_entry[i].class_id != I2O_CLASS_RANDOM_BLOCK_STORAGE &&
+ lct->lct_entry[i].class_id != I2O_CLASS_SCSI_PERIPHERAL &&
+ lct->lct_entry[i].class_id != I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL ){
+ continue;
+ }
+ tid = lct->lct_entry[i].tid;
+ // I2O_DPT_DEVICE_INFO_GROUP_NO;
+ if(adpt_i2o_query_scalar(pHba, tid, 0x8000, -1, buf, 32)<0) {
+ continue;
+ }
+ bus_no = buf[0]>>16;
+ scsi_id = buf[1];
+ scsi_lun = (buf[2]>>8 )&0xff;
+ if(bus_no >= MAX_CHANNEL) { // Something wrong skip it
+ printk(KERN_WARNING"%s: Channel number %d out of range \n", pHba->name, bus_no);
+ continue;
+ }
+ if (scsi_id >= MAX_ID){
+ printk(KERN_WARNING"%s: SCSI ID %d out of range \n", pHba->name, bus_no);
+ continue;
+ }
+ if(bus_no > pHba->top_scsi_channel){
+ pHba->top_scsi_channel = bus_no;
+ }
+ if(scsi_id > pHba->top_scsi_id){
+ pHba->top_scsi_id = scsi_id;
+ }
+ if(scsi_lun > pHba->top_scsi_lun){
+ pHba->top_scsi_lun = scsi_lun;
+ }
+ continue;
+ }
+ d = (struct i2o_device *)kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
+ if(d==NULL)
+ {
+ printk(KERN_CRIT"%s: Out of memory for I2O device data.\n",pHba->name);
+ return -ENOMEM;
+ }
+
+ d->controller = (void*)pHba;
+ d->next = NULL;
+
+ memcpy(&d->lct_data, &lct->lct_entry[i], sizeof(i2o_lct_entry));
+
+ d->flags = 0;
+ tid = d->lct_data.tid;
+ adpt_i2o_report_hba_unit(pHba, d);
+ adpt_i2o_install_device(pHba, d);
+ }
+ bus_no = 0;
+ for(d = pHba->devices; d ; d = d->next) {
+ if(d->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT ||
+ d->lct_data.class_id == I2O_CLASS_FIBRE_CHANNEL_PORT){
+ tid = d->lct_data.tid;
+ // TODO get the bus_no from hrt-but for now they are in order
+ //bus_no =
+ if(bus_no > pHba->top_scsi_channel){
+ pHba->top_scsi_channel = bus_no;
+ }
+ pHba->channel[bus_no].type = d->lct_data.class_id;
+ pHba->channel[bus_no].tid = tid;
+ if(adpt_i2o_query_scalar(pHba, tid, 0x0200, -1, buf, 28)>=0)
+ {
+ pHba->channel[bus_no].scsi_id = buf[1];
+ PDEBUG("Bus %d - SCSI ID %d.\n", bus_no, buf[1]);
+ }
+ // TODO remove - this is just until we get from hrt
+ bus_no++;
+ if(bus_no >= MAX_CHANNEL) { // Something wrong skip it
+ printk(KERN_WARNING"%s: Channel number %d out of range - LCT\n", pHba->name, bus_no);
+ break;
+ }
+ }
+ }
+
+ // Setup adpt_device table
+ for(d = pHba->devices; d ; d = d->next) {
+ if(d->lct_data.class_id == I2O_CLASS_RANDOM_BLOCK_STORAGE ||
+ d->lct_data.class_id == I2O_CLASS_SCSI_PERIPHERAL ||
+ d->lct_data.class_id == I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL ){
+
+ tid = d->lct_data.tid;
+ scsi_id = -1;
+ // I2O_DPT_DEVICE_INFO_GROUP_NO;
+ if(adpt_i2o_query_scalar(pHba, tid, 0x8000, -1, buf, 32)>=0) {
+ bus_no = buf[0]>>16;
+ scsi_id = buf[1];
+ scsi_lun = (buf[2]>>8 )&0xff;
+ if(bus_no >= MAX_CHANNEL) { // Something wrong skip it
+ continue;
+ }
+ if (scsi_id >= MAX_ID) {
+ continue;
+ }
+ if( pHba->channel[bus_no].device[scsi_id] == NULL){
+ pDev = kmalloc(sizeof(struct adpt_device),GFP_KERNEL);
+ if(pDev == NULL) {
+ return -ENOMEM;
+ }
+ pHba->channel[bus_no].device[scsi_id] = pDev;
+ memset(pDev,0,sizeof(struct adpt_device));
+ } else {
+ for( pDev = pHba->channel[bus_no].device[scsi_id];
+ pDev->next_lun; pDev = pDev->next_lun){
+ }
+ pDev->next_lun = kmalloc(sizeof(struct adpt_device),GFP_KERNEL);
+ if(pDev->next_lun == NULL) {
+ return -ENOMEM;
+ }
+ memset(pDev->next_lun,0,sizeof(struct adpt_device));
+ pDev = pDev->next_lun;
+ }
+ pDev->tid = tid;
+ pDev->scsi_channel = bus_no;
+ pDev->scsi_id = scsi_id;
+ pDev->scsi_lun = scsi_lun;
+ pDev->pI2o_dev = d;
+ d->owner = pDev;
+ pDev->type = (buf[0])&0xff;
+ pDev->flags = (buf[0]>>8)&0xff;
+ if(scsi_id > pHba->top_scsi_id){
+ pHba->top_scsi_id = scsi_id;
+ }
+ if(scsi_lun > pHba->top_scsi_lun){
+ pHba->top_scsi_lun = scsi_lun;
+ }
+ }
+ if(scsi_id == -1){
+ printk(KERN_WARNING"Could not find SCSI ID for %s\n",
+ d->lct_data.identity_tag);
+ }
+ }
+ }
+ return 0;
+}
+
+
+/*
+ * Each I2O controller has a chain of devices on it - these match
+ * the useful parts of the LCT of the board.
+ */
+
+static int adpt_i2o_install_device(adpt_hba* pHba, struct i2o_device *d)
+{
+ down(&adpt_configuration_lock);
+ d->controller=pHba;
+ d->owner=NULL;
+ d->next=pHba->devices;
+ d->prev=NULL;
+ if (pHba->devices != NULL){
+ pHba->devices->prev=d;
+ }
+ pHba->devices=d;
+ *d->dev_name = 0;
+
+ up(&adpt_configuration_lock);
+ return 0;
+}
+
+static int adpt_open(struct inode *inode, struct file *file)
+{
+ int minor;
+ adpt_hba* pHba;
+
+ //TODO check for root access
+ //
+ minor = iminor(inode);
+ if (minor >= hba_count) {
+ return -ENXIO;
+ }
+ down(&adpt_configuration_lock);
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ if (pHba->unit == minor) {
+ break; /* found adapter */
+ }
+ }
+ if (pHba == NULL) {
+ up(&adpt_configuration_lock);
+ return -ENXIO;
+ }
+
+// if(pHba->in_use){
+ // up(&adpt_configuration_lock);
+// return -EBUSY;
+// }
+
+ pHba->in_use = 1;
+ up(&adpt_configuration_lock);
+
+ return 0;
+}
+
+static int adpt_close(struct inode *inode, struct file *file)
+{
+ int minor;
+ adpt_hba* pHba;
+
+ minor = iminor(inode);
+ if (minor >= hba_count) {
+ return -ENXIO;
+ }
+ down(&adpt_configuration_lock);
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ if (pHba->unit == minor) {
+ break; /* found adapter */
+ }
+ }
+ up(&adpt_configuration_lock);
+ if (pHba == NULL) {
+ return -ENXIO;
+ }
+
+ pHba->in_use = 0;
+
+ return 0;
+}
+
+
+static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
+{
+ u32 msg[MAX_MESSAGE_SIZE];
+ u32* reply = NULL;
+ u32 size = 0;
+ u32 reply_size = 0;
+ u32 __user *user_msg = arg;
+ u32 __user * user_reply = NULL;
+ void *sg_list[pHba->sg_tablesize];
+ u32 sg_offset = 0;
+ u32 sg_count = 0;
+ int sg_index = 0;
+ u32 i = 0;
+ u32 rcode = 0;
+ void *p = NULL;
+ ulong flags = 0;
+
+ memset(&msg, 0, MAX_MESSAGE_SIZE*4);
+ // get user msg size in u32s
+ if(get_user(size, &user_msg[0])){
+ return -EFAULT;
+ }
+ size = size>>16;
+
+ user_reply = &user_msg[size];
+ if(size > MAX_MESSAGE_SIZE){
+ return -EFAULT;
+ }
+ size *= 4; // Convert to bytes
+
+ /* Copy in the user's I2O command */
+ if(copy_from_user(msg, user_msg, size)) {
+ return -EFAULT;
+ }
+ get_user(reply_size, &user_reply[0]);
+ reply_size = reply_size>>16;
+ if(reply_size > REPLY_FRAME_SIZE){
+ reply_size = REPLY_FRAME_SIZE;
+ }
+ reply_size *= 4;
+ reply = kmalloc(REPLY_FRAME_SIZE*4, GFP_KERNEL);
+ if(reply == NULL) {
+ printk(KERN_WARNING"%s: Could not allocate reply buffer\n",pHba->name);
+ return -ENOMEM;
+ }
+ memset(reply,0,REPLY_FRAME_SIZE*4);
+ sg_offset = (msg[0]>>4)&0xf;
+ msg[2] = 0x40000000; // IOCTL context
+ msg[3] = (u32)reply;
+ memset(sg_list,0, sizeof(sg_list[0])*pHba->sg_tablesize);
+ if(sg_offset) {
+ // TODO 64bit fix
+ struct sg_simple_element *sg = (struct sg_simple_element*) (msg+sg_offset);
+ sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element);
+ if (sg_count > pHba->sg_tablesize){
+ printk(KERN_DEBUG"%s:IOCTL SG List too large (%u)\n", pHba->name,sg_count);
+ kfree (reply);
+ return -EINVAL;
+ }
+
+ for(i = 0; i < sg_count; i++) {
+ int sg_size;
+
+ if (!(sg[i].flag_count & 0x10000000 /*I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT*/)) {
+ printk(KERN_DEBUG"%s:Bad SG element %d - not simple (%x)\n",pHba->name,i, sg[i].flag_count);
+ rcode = -EINVAL;
+ goto cleanup;
+ }
+ sg_size = sg[i].flag_count & 0xffffff;
+ /* Allocate memory for the transfer */
+ p = kmalloc(sg_size, GFP_KERNEL|ADDR32);
+ if(!p) {
+ printk(KERN_DEBUG"%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+ pHba->name,sg_size,i,sg_count);
+ rcode = -ENOMEM;
+ goto cleanup;
+ }
+ sg_list[sg_index++] = p; // sglist indexed with input frame, not our internal frame.
+ /* Copy in the user's SG buffer if necessary */
+ if(sg[i].flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR*/) {
+ // TODO 64bit fix
+ if (copy_from_user(p,(void __user *)sg[i].addr_bus, sg_size)) {
+ printk(KERN_DEBUG"%s: Could not copy SG buf %d FROM user\n",pHba->name,i);
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ }
+ //TODO 64bit fix
+ sg[i].addr_bus = (u32)virt_to_bus(p);
+ }
+ }
+
+ do {
+ if(pHba->host)
+ spin_lock_irqsave(pHba->host->host_lock, flags);
+ // This state stops any new commands from enterring the
+ // controller while processing the ioctl
+// pHba->state |= DPTI_STATE_IOCTL;
+// We can't set this now - The scsi subsystem sets host_blocked and
+// the queue empties and stops. We need a way to restart the queue
+ rcode = adpt_i2o_post_wait(pHba, msg, size, FOREVER);
+ if (rcode != 0)
+ printk("adpt_i2o_passthru: post wait failed %d %p\n",
+ rcode, reply);
+// pHba->state &= ~DPTI_STATE_IOCTL;
+ if(pHba->host)
+ spin_unlock_irqrestore(pHba->host->host_lock, flags);
+ } while(rcode == -ETIMEDOUT);
+
+ if(rcode){
+ goto cleanup;
+ }
+
+ if(sg_offset) {
+ /* Copy back the Scatter Gather buffers back to user space */
+ u32 j;
+ // TODO 64bit fix
+ struct sg_simple_element* sg;
+ int sg_size;
+
+ // re-acquire the original message to handle correctly the sg copy operation
+ memset(&msg, 0, MAX_MESSAGE_SIZE*4);
+ // get user msg size in u32s
+ if(get_user(size, &user_msg[0])){
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ size = size>>16;
+ size *= 4;
+ /* Copy in the user's I2O command */
+ if (copy_from_user (msg, user_msg, size)) {
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element);
+
+ // TODO 64bit fix
+ sg = (struct sg_simple_element*)(msg + sg_offset);
+ for (j = 0; j < sg_count; j++) {
+ /* Copy out the SG list to user's buffer if necessary */
+ if(! (sg[j].flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR*/)) {
+ sg_size = sg[j].flag_count & 0xffffff;
+ // TODO 64bit fix
+ if (copy_to_user((void __user *)sg[j].addr_bus,sg_list[j], sg_size)) {
+ printk(KERN_WARNING"%s: Could not copy %p TO user %x\n",pHba->name, sg_list[j], sg[j].addr_bus);
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ }
+ }
+ }
+
+ /* Copy back the reply to user space */
+ if (reply_size) {
+ // we wrote our own values for context - now restore the user supplied ones
+ if(copy_from_user(reply+2, user_msg+2, sizeof(u32)*2)) {
+ printk(KERN_WARNING"%s: Could not copy message context FROM user\n",pHba->name);
+ rcode = -EFAULT;
+ }
+ if(copy_to_user(user_reply, reply, reply_size)) {
+ printk(KERN_WARNING"%s: Could not copy reply TO user\n",pHba->name);
+ rcode = -EFAULT;
+ }
+ }
+
+
+cleanup:
+ if (rcode != -ETIME && rcode != -EINTR)
+ kfree (reply);
+ while(sg_index) {
+ if(sg_list[--sg_index]) {
+ if (rcode != -ETIME && rcode != -EINTR)
+ kfree(sg_list[sg_index]);
+ }
+ }
+ return rcode;
+}
+
+
+/*
+ * This routine returns information about the system. This does not effect
+ * any logic and if the info is wrong - it doesn't matter.
+ */
+
+/* Get all the info we can not get from kernel services */
+static int adpt_system_info(void __user *buffer)
+{
+ sysInfo_S si;
+
+ memset(&si, 0, sizeof(si));
+
+ si.osType = OS_LINUX;
+ si.osMajorVersion = (u8) (LINUX_VERSION_CODE >> 16);
+ si.osMinorVersion = (u8) (LINUX_VERSION_CODE >> 8 & 0x0ff);
+ si.osRevision = (u8) (LINUX_VERSION_CODE & 0x0ff);
+ si.busType = SI_PCI_BUS;
+ si.processorFamily = DPTI_sig.dsProcessorFamily;
+
+#if defined __i386__
+ adpt_i386_info(&si);
+#elif defined (__ia64__)
+ adpt_ia64_info(&si);
+#elif defined(__sparc__)
+ adpt_sparc_info(&si);
+#elif defined (__alpha__)
+ adpt_alpha_info(&si);
+#else
+ si.processorType = 0xff ;
+#endif
+ if(copy_to_user(buffer, &si, sizeof(si))){
+ printk(KERN_WARNING"dpti: Could not copy buffer TO user\n");
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+#if defined __ia64__
+static void adpt_ia64_info(sysInfo_S* si)
+{
+ // This is all the info we need for now
+ // We will add more info as our new
+ // managmenent utility requires it
+ si->processorType = PROC_IA64;
+}
+#endif
+
+
+#if defined __sparc__
+static void adpt_sparc_info(sysInfo_S* si)
+{
+ // This is all the info we need for now
+ // We will add more info as our new
+ // managmenent utility requires it
+ si->processorType = PROC_ULTRASPARC;
+}
+#endif
+
+#if defined __alpha__
+static void adpt_alpha_info(sysInfo_S* si)
+{
+ // This is all the info we need for now
+ // We will add more info as our new
+ // managmenent utility requires it
+ si->processorType = PROC_ALPHA;
+}
+#endif
+
+#if defined __i386__
+
+static void adpt_i386_info(sysInfo_S* si)
+{
+ // This is all the info we need for now
+ // We will add more info as our new
+ // managmenent utility requires it
+ switch (boot_cpu_data.x86) {
+ case CPU_386:
+ si->processorType = PROC_386;
+ break;
+ case CPU_486:
+ si->processorType = PROC_486;
+ break;
+ case CPU_586:
+ si->processorType = PROC_PENTIUM;
+ break;
+ default: // Just in case
+ si->processorType = PROC_PENTIUM;
+ break;
+ }
+}
+
+#endif
+
+
+static int adpt_ioctl(struct inode *inode, struct file *file, uint cmd,
+ ulong arg)
+{
+ int minor;
+ int error = 0;
+ adpt_hba* pHba;
+ ulong flags = 0;
+ void __user *argp = (void __user *)arg;
+
+ minor = iminor(inode);
+ if (minor >= DPTI_MAX_HBA){
+ return -ENXIO;
+ }
+ down(&adpt_configuration_lock);
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ if (pHba->unit == minor) {
+ break; /* found adapter */
+ }
+ }
+ up(&adpt_configuration_lock);
+ if(pHba == NULL){
+ return -ENXIO;
+ }
+
+ while((volatile u32) pHba->state & DPTI_STATE_RESET ) {
+ set_task_state(current,TASK_UNINTERRUPTIBLE);
+ schedule_timeout(2);
+
+ }
+
+ switch (cmd) {
+ // TODO: handle 3 cases
+ case DPT_SIGNATURE:
+ if (copy_to_user(argp, &DPTI_sig, sizeof(DPTI_sig))) {
+ return -EFAULT;
+ }
+ break;
+ case I2OUSRCMD:
+ return adpt_i2o_passthru(pHba, argp);
+
+ case DPT_CTRLINFO:{
+ drvrHBAinfo_S HbaInfo;
+
+#define FLG_OSD_PCI_VALID 0x0001
+#define FLG_OSD_DMA 0x0002
+#define FLG_OSD_I2O 0x0004
+ memset(&HbaInfo, 0, sizeof(HbaInfo));
+ HbaInfo.drvrHBAnum = pHba->unit;
+ HbaInfo.baseAddr = (ulong) pHba->base_addr_phys;
+ HbaInfo.blinkState = adpt_read_blink_led(pHba);
+ HbaInfo.pciBusNum = pHba->pDev->bus->number;
+ HbaInfo.pciDeviceNum=PCI_SLOT(pHba->pDev->devfn);
+ HbaInfo.Interrupt = pHba->pDev->irq;
+ HbaInfo.hbaFlags = FLG_OSD_PCI_VALID | FLG_OSD_DMA | FLG_OSD_I2O;
+ if(copy_to_user(argp, &HbaInfo, sizeof(HbaInfo))){
+ printk(KERN_WARNING"%s: Could not copy HbaInfo TO user\n",pHba->name);
+ return -EFAULT;
+ }
+ break;
+ }
+ case DPT_SYSINFO:
+ return adpt_system_info(argp);
+ case DPT_BLINKLED:{
+ u32 value;
+ value = (u32)adpt_read_blink_led(pHba);
+ if (copy_to_user(argp, &value, sizeof(value))) {
+ return -EFAULT;
+ }
+ break;
+ }
+ case I2ORESETCMD:
+ if(pHba->host)
+ spin_lock_irqsave(pHba->host->host_lock, flags);
+ adpt_hba_reset(pHba);
+ if(pHba->host)
+ spin_unlock_irqrestore(pHba->host->host_lock, flags);
+ break;
+ case I2ORESCANCMD:
+ adpt_rescan(pHba);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return error;
+}
+
+
+static irqreturn_t adpt_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct scsi_cmnd* cmd;
+ adpt_hba* pHba = dev_id;
+ u32 m;
+ ulong reply;
+ u32 status=0;
+ u32 context;
+ ulong flags = 0;
+ int handled = 0;
+
+ if (pHba == NULL){
+ printk(KERN_WARNING"adpt_isr: NULL dev_id\n");
+ return IRQ_NONE;
+ }
+ if(pHba->host)
+ spin_lock_irqsave(pHba->host->host_lock, flags);
+
+ while( readl(pHba->irq_mask) & I2O_INTERRUPT_PENDING_B) {
+ m = readl(pHba->reply_port);
+ if(m == EMPTY_QUEUE){
+ // Try twice then give up
+ rmb();
+ m = readl(pHba->reply_port);
+ if(m == EMPTY_QUEUE){
+ // This really should not happen
+ printk(KERN_ERR"dpti: Could not get reply frame\n");
+ goto out;
+ }
+ }
+ reply = (ulong)bus_to_virt(m);
+
+ if (readl(reply) & MSG_FAIL) {
+ u32 old_m = readl(reply+28);
+ ulong msg;
+ u32 old_context;
+ PDEBUG("%s: Failed message\n",pHba->name);
+ if(old_m >= 0x100000){
+ printk(KERN_ERR"%s: Bad preserved MFA (%x)- dropping frame\n",pHba->name,old_m);
+ writel(m,pHba->reply_port);
+ continue;
+ }
+ // Transaction context is 0 in failed reply frame
+ msg = (ulong)(pHba->msg_addr_virt + old_m);
+ old_context = readl(msg+12);
+ writel(old_context, reply+12);
+ adpt_send_nop(pHba, old_m);
+ }
+ context = readl(reply+8);
+ if(context & 0x40000000){ // IOCTL
+ ulong p = (ulong)(readl(reply+12));
+ if( p != 0) {
+ memcpy((void*)p, (void*)reply, REPLY_FRAME_SIZE * 4);
+ }
+ // All IOCTLs will also be post wait
+ }
+ if(context & 0x80000000){ // Post wait message
+ status = readl(reply+16);
+ if(status >> 24){
+ status &= 0xffff; /* Get detail status */
+ } else {
+ status = I2O_POST_WAIT_OK;
+ }
+ if(!(context & 0x40000000)) {
+ cmd = (struct scsi_cmnd*) readl(reply+12);
+ if(cmd != NULL) {
+ printk(KERN_WARNING"%s: Apparent SCSI cmd in Post Wait Context - cmd=%p context=%x\n", pHba->name, cmd, context);
+ }
+ }
+ adpt_i2o_post_wait_complete(context, status);
+ } else { // SCSI message
+ cmd = (struct scsi_cmnd*) readl(reply+12);
+ if(cmd != NULL){
+ if(cmd->serial_number != 0) { // If not timedout
+ adpt_i2o_to_scsi(reply, cmd);
+ }
+ }
+ }
+ writel(m, pHba->reply_port);
+ wmb();
+ rmb();
+ }
+ handled = 1;
+out: if(pHba->host)
+ spin_unlock_irqrestore(pHba->host->host_lock, flags);
+ return IRQ_RETVAL(handled);
+}
+
+static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* d)
+{
+ int i;
+ u32 msg[MAX_MESSAGE_SIZE];
+ u32* mptr;
+ u32 *lenptr;
+ int direction;
+ int scsidir;
+ u32 len;
+ u32 reqlen;
+ s32 rcode;
+
+ memset(msg, 0 , sizeof(msg));
+ len = cmd->request_bufflen;
+ direction = 0x00000000;
+
+ scsidir = 0x00000000; // DATA NO XFER
+ if(len) {
+ /*
+ * Set SCBFlags to indicate if data is being transferred
+ * in or out, or no data transfer
+ * Note: Do not have to verify index is less than 0 since
+ * cmd->cmnd[0] is an unsigned char
+ */
+ switch(cmd->sc_data_direction){
+ case DMA_FROM_DEVICE:
+ scsidir =0x40000000; // DATA IN (iop<--dev)
+ break;
+ case DMA_TO_DEVICE:
+ direction=0x04000000; // SGL OUT
+ scsidir =0x80000000; // DATA OUT (iop-->dev)
+ break;
+ case DMA_NONE:
+ break;
+ case DMA_BIDIRECTIONAL:
+ scsidir =0x40000000; // DATA IN (iop<--dev)
+ // Assume In - and continue;
+ break;
+ default:
+ printk(KERN_WARNING"%s: scsi opcode 0x%x not supported.\n",
+ pHba->name, cmd->cmnd[0]);
+ cmd->result = (DID_OK <<16) | (INITIATOR_ERROR << 8);
+ cmd->scsi_done(cmd);
+ return 0;
+ }
+ }
+ // msg[0] is set later
+ // I2O_CMD_SCSI_EXEC
+ msg[1] = ((0xff<<24)|(HOST_TID<<12)|d->tid);
+ msg[2] = 0;
+ msg[3] = (u32)cmd; /* We want the SCSI control block back */
+ // Our cards use the transaction context as the tag for queueing
+ // Adaptec/DPT Private stuff
+ msg[4] = I2O_CMD_SCSI_EXEC|(DPT_ORGANIZATION_ID<<16);
+ msg[5] = d->tid;
+ /* Direction, disconnect ok | sense data | simple queue , CDBLen */
+ // I2O_SCB_FLAG_ENABLE_DISCONNECT |
+ // I2O_SCB_FLAG_SIMPLE_QUEUE_TAG |
+ // I2O_SCB_FLAG_SENSE_DATA_IN_MESSAGE;
+ msg[6] = scsidir|0x20a00000|cmd->cmd_len;
+
+ mptr=msg+7;
+
+ // Write SCSI command into the message - always 16 byte block
+ memset(mptr, 0, 16);
+ memcpy(mptr, cmd->cmnd, cmd->cmd_len);
+ mptr+=4;
+ lenptr=mptr++; /* Remember me - fill in when we know */
+ reqlen = 14; // SINGLE SGE
+ /* Now fill in the SGList and command */
+ if(cmd->use_sg) {
+ struct scatterlist *sg = (struct scatterlist *)cmd->request_buffer;
+ int sg_count = pci_map_sg(pHba->pDev, sg, cmd->use_sg,
+ cmd->sc_data_direction);
+
+
+ len = 0;
+ for(i = 0 ; i < sg_count; i++) {
+ *mptr++ = direction|0x10000000|sg_dma_len(sg);
+ len+=sg_dma_len(sg);
+ *mptr++ = sg_dma_address(sg);
+ sg++;
+ }
+ /* Make this an end of list */
+ mptr[-2] = direction|0xD0000000|sg_dma_len(sg-1);
+ reqlen = mptr - msg;
+ *lenptr = len;
+
+ if(cmd->underflow && len != cmd->underflow){
+ printk(KERN_WARNING"Cmd len %08X Cmd underflow %08X\n",
+ len, cmd->underflow);
+ }
+ } else {
+ *lenptr = len = cmd->request_bufflen;
+ if(len == 0) {
+ reqlen = 12;
+ } else {
+ *mptr++ = 0xD0000000|direction|cmd->request_bufflen;
+ *mptr++ = pci_map_single(pHba->pDev,
+ cmd->request_buffer,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ }
+ }
+
+ /* Stick the headers on */
+ msg[0] = reqlen<<16 | ((reqlen > 12) ? SGL_OFFSET_12 : SGL_OFFSET_0);
+
+ // Send it on it's way
+ rcode = adpt_i2o_post_this(pHba, msg, reqlen<<2);
+ if (rcode == 0) {
+ return 0;
+ }
+ return rcode;
+}
+
+
+static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht)
+{
+ struct Scsi_Host *host = NULL;
+
+ host = scsi_register(sht, sizeof(adpt_hba*));
+ if (host == NULL) {
+ printk ("%s: scsi_register returned NULL\n",pHba->name);
+ return -1;
+ }
+ host->hostdata[0] = (unsigned long)pHba;
+ pHba->host = host;
+
+ host->irq = pHba->pDev->irq;
+ /* no IO ports, so don't have to set host->io_port and
+ * host->n_io_port
+ */
+ host->io_port = 0;
+ host->n_io_port = 0;
+ /* see comments in hosts.h */
+ host->max_id = 16;
+ host->max_lun = 256;
+ host->max_channel = pHba->top_scsi_channel + 1;
+ host->cmd_per_lun = 1;
+ host->unique_id = (uint) pHba;
+ host->sg_tablesize = pHba->sg_tablesize;
+ host->can_queue = pHba->post_fifo_size;
+
+ return 0;
+}
+
+
+static s32 adpt_i2o_to_scsi(ulong reply, struct scsi_cmnd* cmd)
+{
+ adpt_hba* pHba;
+ u32 hba_status;
+ u32 dev_status;
+ u32 reply_flags = readl(reply) & 0xff00; // Leave it shifted up 8 bits
+ // I know this would look cleaner if I just read bytes
+ // but the model I have been using for all the rest of the
+ // io is in 4 byte words - so I keep that model
+ u16 detailed_status = readl(reply+16) &0xffff;
+ dev_status = (detailed_status & 0xff);
+ hba_status = detailed_status >> 8;
+
+ // calculate resid for sg
+ cmd->resid = cmd->request_bufflen - readl(reply+5);
+
+ pHba = (adpt_hba*) cmd->device->host->hostdata[0];
+
+ cmd->sense_buffer[0] = '\0'; // initialize sense valid flag to false
+
+ if(!(reply_flags & MSG_FAIL)) {
+ switch(detailed_status & I2O_SCSI_DSC_MASK) {
+ case I2O_SCSI_DSC_SUCCESS:
+ cmd->result = (DID_OK << 16);
+ // handle underflow
+ if(readl(reply+5) < cmd->underflow ) {
+ cmd->result = (DID_ERROR <<16);
+ printk(KERN_WARNING"%s: SCSI CMD underflow\n",pHba->name);
+ }
+ break;
+ case I2O_SCSI_DSC_REQUEST_ABORTED:
+ cmd->result = (DID_ABORT << 16);
+ break;
+ case I2O_SCSI_DSC_PATH_INVALID:
+ case I2O_SCSI_DSC_DEVICE_NOT_PRESENT:
+ case I2O_SCSI_DSC_SELECTION_TIMEOUT:
+ case I2O_SCSI_DSC_COMMAND_TIMEOUT:
+ case I2O_SCSI_DSC_NO_ADAPTER:
+ case I2O_SCSI_DSC_RESOURCE_UNAVAILABLE:
+ printk(KERN_WARNING"%s: SCSI Timeout-Device (%d,%d,%d) hba status=0x%x, dev status=0x%x, cmd=0x%x\n",
+ pHba->name, (u32)cmd->device->channel, (u32)cmd->device->id, (u32)cmd->device->lun, hba_status, dev_status, cmd->cmnd[0]);
+ cmd->result = (DID_TIME_OUT << 16);
+ break;
+ case I2O_SCSI_DSC_ADAPTER_BUSY:
+ case I2O_SCSI_DSC_BUS_BUSY:
+ cmd->result = (DID_BUS_BUSY << 16);
+ break;
+ case I2O_SCSI_DSC_SCSI_BUS_RESET:
+ case I2O_SCSI_DSC_BDR_MESSAGE_SENT:
+ cmd->result = (DID_RESET << 16);
+ break;
+ case I2O_SCSI_DSC_PARITY_ERROR_FAILURE:
+ printk(KERN_WARNING"%s: SCSI CMD parity error\n",pHba->name);
+ cmd->result = (DID_PARITY << 16);
+ break;
+ case I2O_SCSI_DSC_UNABLE_TO_ABORT:
+ case I2O_SCSI_DSC_COMPLETE_WITH_ERROR:
+ case I2O_SCSI_DSC_UNABLE_TO_TERMINATE:
+ case I2O_SCSI_DSC_MR_MESSAGE_RECEIVED:
+ case I2O_SCSI_DSC_AUTOSENSE_FAILED:
+ case I2O_SCSI_DSC_DATA_OVERRUN:
+ case I2O_SCSI_DSC_UNEXPECTED_BUS_FREE:
+ case I2O_SCSI_DSC_SEQUENCE_FAILURE:
+ case I2O_SCSI_DSC_REQUEST_LENGTH_ERROR:
+ case I2O_SCSI_DSC_PROVIDE_FAILURE:
+ case I2O_SCSI_DSC_REQUEST_TERMINATED:
+ case I2O_SCSI_DSC_IDE_MESSAGE_SENT:
+ case I2O_SCSI_DSC_UNACKNOWLEDGED_EVENT:
+ case I2O_SCSI_DSC_MESSAGE_RECEIVED:
+ case I2O_SCSI_DSC_INVALID_CDB:
+ case I2O_SCSI_DSC_LUN_INVALID:
+ case I2O_SCSI_DSC_SCSI_TID_INVALID:
+ case I2O_SCSI_DSC_FUNCTION_UNAVAILABLE:
+ case I2O_SCSI_DSC_NO_NEXUS:
+ case I2O_SCSI_DSC_CDB_RECEIVED:
+ case I2O_SCSI_DSC_LUN_ALREADY_ENABLED:
+ case I2O_SCSI_DSC_QUEUE_FROZEN:
+ case I2O_SCSI_DSC_REQUEST_INVALID:
+ default:
+ printk(KERN_WARNING"%s: SCSI error %0x-Device(%d,%d,%d) hba_status=0x%x, dev_status=0x%x, cmd=0x%x\n",
+ pHba->name, detailed_status & I2O_SCSI_DSC_MASK, (u32)cmd->device->channel, (u32)cmd->device->id, (u32)cmd->device->lun,
+ hba_status, dev_status, cmd->cmnd[0]);
+ cmd->result = (DID_ERROR << 16);
+ break;
+ }
+
+ // copy over the request sense data if it was a check
+ // condition status
+ if(dev_status == 0x02 /*CHECK_CONDITION*/) {
+ u32 len = sizeof(cmd->sense_buffer);
+ len = (len > 40) ? 40 : len;
+ // Copy over the sense data
+ memcpy(cmd->sense_buffer, (void*)(reply+28) , len);
+ if(cmd->sense_buffer[0] == 0x70 /* class 7 */ &&
+ cmd->sense_buffer[2] == DATA_PROTECT ){
+ /* This is to handle an array failed */
+ cmd->result = (DID_TIME_OUT << 16);
+ printk(KERN_WARNING"%s: SCSI Data Protect-Device (%d,%d,%d) hba_status=0x%x, dev_status=0x%x, cmd=0x%x\n",
+ pHba->name, (u32)cmd->device->channel, (u32)cmd->device->id, (u32)cmd->device->lun,
+ hba_status, dev_status, cmd->cmnd[0]);
+
+ }
+ }
+ } else {
+ /* In this condtion we could not talk to the tid
+ * the card rejected it. We should signal a retry
+ * for a limitted number of retries.
+ */
+ cmd->result = (DID_TIME_OUT << 16);
+ printk(KERN_WARNING"%s: I2O MSG_FAIL - Device (%d,%d,%d) tid=%d, cmd=0x%x\n",
+ pHba->name, (u32)cmd->device->channel, (u32)cmd->device->id, (u32)cmd->device->lun,
+ ((struct adpt_device*)(cmd->device->hostdata))->tid, cmd->cmnd[0]);
+ }
+
+ cmd->result |= (dev_status);
+
+ if(cmd->scsi_done != NULL){
+ cmd->scsi_done(cmd);
+ }
+ return cmd->result;
+}
+
+
+static s32 adpt_rescan(adpt_hba* pHba)
+{
+ s32 rcode;
+ ulong flags = 0;
+
+ if(pHba->host)
+ spin_lock_irqsave(pHba->host->host_lock, flags);
+ if ((rcode=adpt_i2o_lct_get(pHba)) < 0)
+ goto out;
+ if ((rcode=adpt_i2o_reparse_lct(pHba)) < 0)
+ goto out;
+ rcode = 0;
+out: if(pHba->host)
+ spin_unlock_irqrestore(pHba->host->host_lock, flags);
+ return rcode;
+}
+
+
+static s32 adpt_i2o_reparse_lct(adpt_hba* pHba)
+{
+ int i;
+ int max;
+ int tid;
+ struct i2o_device *d;
+ i2o_lct *lct = pHba->lct;
+ u8 bus_no = 0;
+ s16 scsi_id;
+ s16 scsi_lun;
+ u32 buf[10]; // at least 8 u32's
+ struct adpt_device* pDev = NULL;
+ struct i2o_device* pI2o_dev = NULL;
+
+ if (lct == NULL) {
+ printk(KERN_ERR "%s: LCT is empty???\n",pHba->name);
+ return -1;
+ }
+
+ max = lct->table_size;
+ max -= 3;
+ max /= 9;
+
+ // Mark each drive as unscanned
+ for (d = pHba->devices; d; d = d->next) {
+ pDev =(struct adpt_device*) d->owner;
+ if(!pDev){
+ continue;
+ }
+ pDev->state |= DPTI_DEV_UNSCANNED;
+ }
+
+ printk(KERN_INFO "%s: LCT has %d entries.\n", pHba->name,max);
+
+ for(i=0;i<max;i++) {
+ if( lct->lct_entry[i].user_tid != 0xfff){
+ continue;
+ }
+
+ if( lct->lct_entry[i].class_id == I2O_CLASS_RANDOM_BLOCK_STORAGE ||
+ lct->lct_entry[i].class_id == I2O_CLASS_SCSI_PERIPHERAL ||
+ lct->lct_entry[i].class_id == I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL ){
+ tid = lct->lct_entry[i].tid;
+ if(adpt_i2o_query_scalar(pHba, tid, 0x8000, -1, buf, 32)<0) {
+ printk(KERN_ERR"%s: Could not query device\n",pHba->name);
+ continue;
+ }
+ bus_no = buf[0]>>16;
+ scsi_id = buf[1];
+ scsi_lun = (buf[2]>>8 )&0xff;
+ pDev = pHba->channel[bus_no].device[scsi_id];
+ /* da lun */
+ while(pDev) {
+ if(pDev->scsi_lun == scsi_lun) {
+ break;
+ }
+ pDev = pDev->next_lun;
+ }
+ if(!pDev ) { // Something new add it
+ d = (struct i2o_device *)kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
+ if(d==NULL)
+ {
+ printk(KERN_CRIT "Out of memory for I2O device data.\n");
+ return -ENOMEM;
+ }
+
+ d->controller = (void*)pHba;
+ d->next = NULL;
+
+ memcpy(&d->lct_data, &lct->lct_entry[i], sizeof(i2o_lct_entry));
+
+ d->flags = 0;
+ adpt_i2o_report_hba_unit(pHba, d);
+ adpt_i2o_install_device(pHba, d);
+
+ if(bus_no >= MAX_CHANNEL) { // Something wrong skip it
+ printk(KERN_WARNING"%s: Channel number %d out of range \n", pHba->name, bus_no);
+ continue;
+ }
+ pDev = pHba->channel[bus_no].device[scsi_id];
+ if( pDev == NULL){
+ pDev = kmalloc(sizeof(struct adpt_device),GFP_KERNEL);
+ if(pDev == NULL) {
+ return -ENOMEM;
+ }
+ pHba->channel[bus_no].device[scsi_id] = pDev;
+ } else {
+ while (pDev->next_lun) {
+ pDev = pDev->next_lun;
+ }
+ pDev = pDev->next_lun = kmalloc(sizeof(struct adpt_device),GFP_KERNEL);
+ if(pDev == NULL) {
+ return -ENOMEM;
+ }
+ }
+ memset(pDev,0,sizeof(struct adpt_device));
+ pDev->tid = d->lct_data.tid;
+ pDev->scsi_channel = bus_no;
+ pDev->scsi_id = scsi_id;
+ pDev->scsi_lun = scsi_lun;
+ pDev->pI2o_dev = d;
+ d->owner = pDev;
+ pDev->type = (buf[0])&0xff;
+ pDev->flags = (buf[0]>>8)&0xff;
+ // Too late, SCSI system has made up it's mind, but what the hey ...
+ if(scsi_id > pHba->top_scsi_id){
+ pHba->top_scsi_id = scsi_id;
+ }
+ if(scsi_lun > pHba->top_scsi_lun){
+ pHba->top_scsi_lun = scsi_lun;
+ }
+ continue;
+ } // end of new i2o device
+
+ // We found an old device - check it
+ while(pDev) {
+ if(pDev->scsi_lun == scsi_lun) {
+ if(!scsi_device_online(pDev->pScsi_dev)) {
+ printk(KERN_WARNING"%s: Setting device (%d,%d,%d) back online\n",
+ pHba->name,bus_no,scsi_id,scsi_lun);
+ if (pDev->pScsi_dev) {
+ scsi_device_set_state(pDev->pScsi_dev, SDEV_RUNNING);
+ }
+ }
+ d = pDev->pI2o_dev;
+ if(d->lct_data.tid != tid) { // something changed
+ pDev->tid = tid;
+ memcpy(&d->lct_data, &lct->lct_entry[i], sizeof(i2o_lct_entry));
+ if (pDev->pScsi_dev) {
+ pDev->pScsi_dev->changed = TRUE;
+ pDev->pScsi_dev->removable = TRUE;
+ }
+ }
+ // Found it - mark it scanned
+ pDev->state = DPTI_DEV_ONLINE;
+ break;
+ }
+ pDev = pDev->next_lun;
+ }
+ }
+ }
+ for (pI2o_dev = pHba->devices; pI2o_dev; pI2o_dev = pI2o_dev->next) {
+ pDev =(struct adpt_device*) pI2o_dev->owner;
+ if(!pDev){
+ continue;
+ }
+ // Drive offline drives that previously existed but could not be found
+ // in the LCT table
+ if (pDev->state & DPTI_DEV_UNSCANNED){
+ pDev->state = DPTI_DEV_OFFLINE;
+ printk(KERN_WARNING"%s: Device (%d,%d,%d) offline\n",pHba->name,pDev->scsi_channel,pDev->scsi_id,pDev->scsi_lun);
+ if (pDev->pScsi_dev) {
+ scsi_device_set_state(pDev->pScsi_dev, SDEV_OFFLINE);
+ }
+ }
+ }
+ return 0;
+}
+
+static void adpt_fail_posted_scbs(adpt_hba* pHba)
+{
+ struct scsi_cmnd* cmd = NULL;
+ struct scsi_device* d = NULL;
+
+ shost_for_each_device(d, pHba->host) {
+ unsigned long flags;
+ spin_lock_irqsave(&d->list_lock, flags);
+ list_for_each_entry(cmd, &d->cmd_list, list) {
+ if(cmd->serial_number == 0){
+ continue;
+ }
+ cmd->result = (DID_OK << 16) | (QUEUE_FULL <<1);
+ cmd->scsi_done(cmd);
+ }
+ spin_unlock_irqrestore(&d->list_lock, flags);
+ }
+}
+
+
+/*============================================================================
+ * Routines from i2o subsystem
+ *============================================================================
+ */
+
+
+
+/*
+ * Bring an I2O controller into HOLD state. See the spec.
+ */
+static int adpt_i2o_activate_hba(adpt_hba* pHba)
+{
+ int rcode;
+
+ if(pHba->initialized ) {
+ if (adpt_i2o_status_get(pHba) < 0) {
+ if((rcode = adpt_i2o_reset_hba(pHba)) != 0){
+ printk(KERN_WARNING"%s: Could NOT reset.\n", pHba->name);
+ return rcode;
+ }
+ if (adpt_i2o_status_get(pHba) < 0) {
+ printk(KERN_INFO "HBA not responding.\n");
+ return -1;
+ }
+ }
+
+ if(pHba->status_block->iop_state == ADAPTER_STATE_FAULTED) {
+ printk(KERN_CRIT "%s: hardware fault\n", pHba->name);
+ return -1;
+ }
+
+ if (pHba->status_block->iop_state == ADAPTER_STATE_READY ||
+ pHba->status_block->iop_state == ADAPTER_STATE_OPERATIONAL ||
+ pHba->status_block->iop_state == ADAPTER_STATE_HOLD ||
+ pHba->status_block->iop_state == ADAPTER_STATE_FAILED) {
+ adpt_i2o_reset_hba(pHba);
+ if (adpt_i2o_status_get(pHba) < 0 || pHba->status_block->iop_state != ADAPTER_STATE_RESET) {
+ printk(KERN_ERR "%s: Failed to initialize.\n", pHba->name);
+ return -1;
+ }
+ }
+ } else {
+ if((rcode = adpt_i2o_reset_hba(pHba)) != 0){
+ printk(KERN_WARNING"%s: Could NOT reset.\n", pHba->name);
+ return rcode;
+ }
+
+ }
+
+ if (adpt_i2o_init_outbound_q(pHba) < 0) {
+ return -1;
+ }
+
+ /* In HOLD state */
+
+ if (adpt_i2o_hrt_get(pHba) < 0) {
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Bring a controller online into OPERATIONAL state.
+ */
+
+static int adpt_i2o_online_hba(adpt_hba* pHba)
+{
+ if (adpt_i2o_systab_send(pHba) < 0) {
+ adpt_i2o_delete_hba(pHba);
+ return -1;
+ }
+ /* In READY state */
+
+ if (adpt_i2o_enable_hba(pHba) < 0) {
+ adpt_i2o_delete_hba(pHba);
+ return -1;
+ }
+
+ /* In OPERATIONAL state */
+ return 0;
+}
+
+static s32 adpt_send_nop(adpt_hba*pHba,u32 m)
+{
+ u32 __iomem *msg;
+ ulong timeout = jiffies + 5*HZ;
+
+ while(m == EMPTY_QUEUE){
+ rmb();
+ m = readl(pHba->post_port);
+ if(m != EMPTY_QUEUE){
+ break;
+ }
+ if(time_after(jiffies,timeout)){
+ printk(KERN_ERR "%s: Timeout waiting for message frame!\n",pHba->name);
+ return 2;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+ msg = (u32 __iomem *)(pHba->msg_addr_virt + m);
+ writel( THREE_WORD_MSG_SIZE | SGL_OFFSET_0,&msg[0]);
+ writel( I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | 0,&msg[1]);
+ writel( 0,&msg[2]);
+ wmb();
+
+ writel(m, pHba->post_port);
+ wmb();
+ return 0;
+}
+
+static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
+{
+ u8 *status;
+ u32 __iomem *msg = NULL;
+ int i;
+ ulong timeout = jiffies + TMOUT_INITOUTBOUND*HZ;
+ u32* ptr;
+ u32 outbound_frame; // This had to be a 32 bit address
+ u32 m;
+
+ do {
+ rmb();
+ m = readl(pHba->post_port);
+ if (m != EMPTY_QUEUE) {
+ break;
+ }
+
+ if(time_after(jiffies,timeout)){
+ printk(KERN_WARNING"%s: Timeout waiting for message frame\n",pHba->name);
+ return -ETIMEDOUT;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ } while(m == EMPTY_QUEUE);
+
+ msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
+
+ status = kmalloc(4,GFP_KERNEL|ADDR32);
+ if (status==NULL) {
+ adpt_send_nop(pHba, m);
+ printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
+ pHba->name);
+ return -ENOMEM;
+ }
+ memset(status, 0, 4);
+
+ writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
+ writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
+ writel(0, &msg[2]);
+ writel(0x0106, &msg[3]); /* Transaction context */
+ writel(4096, &msg[4]); /* Host page frame size */
+ writel((REPLY_FRAME_SIZE)<<16|0x80, &msg[5]); /* Outbound msg frame size and Initcode */
+ writel(0xD0000004, &msg[6]); /* Simple SG LE, EOB */
+ writel(virt_to_bus(status), &msg[7]);
+
+ writel(m, pHba->post_port);
+ wmb();
+
+ // Wait for the reply status to come back
+ do {
+ if (*status) {
+ if (*status != 0x01 /*I2O_EXEC_OUTBOUND_INIT_IN_PROGRESS*/) {
+ break;
+ }
+ }
+ rmb();
+ if(time_after(jiffies,timeout)){
+ printk(KERN_WARNING"%s: Timeout Initializing\n",pHba->name);
+ return -ETIMEDOUT;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ } while (1);
+
+ // If the command was successful, fill the fifo with our reply
+ // message packets
+ if(*status != 0x04 /*I2O_EXEC_OUTBOUND_INIT_COMPLETE*/) {
+ kfree((void*)status);
+ return -2;
+ }
+ kfree((void*)status);
+
+ if(pHba->reply_pool != NULL){
+ kfree(pHba->reply_pool);
+ }
+
+ pHba->reply_pool = (u32*)kmalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
+ if(!pHba->reply_pool){
+ printk(KERN_ERR"%s: Could not allocate reply pool\n",pHba->name);
+ return -1;
+ }
+ memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
+
+ ptr = pHba->reply_pool;
+ for(i = 0; i < pHba->reply_fifo_size; i++) {
+ outbound_frame = (u32)virt_to_bus(ptr);
+ writel(outbound_frame, pHba->reply_port);
+ wmb();
+ ptr += REPLY_FRAME_SIZE;
+ }
+ adpt_i2o_status_get(pHba);
+ return 0;
+}
+
+
+/*
+ * I2O System Table. Contains information about
+ * all the IOPs in the system. Used to inform IOPs
+ * about each other's existence.
+ *
+ * sys_tbl_ver is the CurrentChangeIndicator that is
+ * used by IOPs to track changes.
+ */
+
+
+
+static s32 adpt_i2o_status_get(adpt_hba* pHba)
+{
+ ulong timeout;
+ u32 m;
+ u32 __iomem *msg;
+ u8 *status_block=NULL;
+ ulong status_block_bus;
+
+ if(pHba->status_block == NULL) {
+ pHba->status_block = (i2o_status_block*)
+ kmalloc(sizeof(i2o_status_block),GFP_KERNEL|ADDR32);
+ if(pHba->status_block == NULL) {
+ printk(KERN_ERR
+ "dpti%d: Get Status Block failed; Out of memory. \n",
+ pHba->unit);
+ return -ENOMEM;
+ }
+ }
+ memset(pHba->status_block, 0, sizeof(i2o_status_block));
+ status_block = (u8*)(pHba->status_block);
+ status_block_bus = virt_to_bus(pHba->status_block);
+ timeout = jiffies+TMOUT_GETSTATUS*HZ;
+ do {
+ rmb();
+ m = readl(pHba->post_port);
+ if (m != EMPTY_QUEUE) {
+ break;
+ }
+ if(time_after(jiffies,timeout)){
+ printk(KERN_ERR "%s: Timeout waiting for message !\n",
+ pHba->name);
+ return -ETIMEDOUT;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ } while(m==EMPTY_QUEUE);
+
+
+ msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
+
+ writel(NINE_WORD_MSG_SIZE|SGL_OFFSET_0, &msg[0]);
+ writel(I2O_CMD_STATUS_GET<<24|HOST_TID<<12|ADAPTER_TID, &msg[1]);
+ writel(1, &msg[2]);
+ writel(0, &msg[3]);
+ writel(0, &msg[4]);
+ writel(0, &msg[5]);
+ writel(((u32)status_block_bus)&0xffffffff, &msg[6]);
+ writel(0, &msg[7]);
+ writel(sizeof(i2o_status_block), &msg[8]); // 88 bytes
+
+ //post message
+ writel(m, pHba->post_port);
+ wmb();
+
+ while(status_block[87]!=0xff){
+ if(time_after(jiffies,timeout)){
+ printk(KERN_ERR"dpti%d: Get status timeout.\n",
+ pHba->unit);
+ return -ETIMEDOUT;
+ }
+ rmb();
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+
+ // Set up our number of outbound and inbound messages
+ pHba->post_fifo_size = pHba->status_block->max_inbound_frames;
+ if (pHba->post_fifo_size > MAX_TO_IOP_MESSAGES) {
+ pHba->post_fifo_size = MAX_TO_IOP_MESSAGES;
+ }
+
+ pHba->reply_fifo_size = pHba->status_block->max_outbound_frames;
+ if (pHba->reply_fifo_size > MAX_FROM_IOP_MESSAGES) {
+ pHba->reply_fifo_size = MAX_FROM_IOP_MESSAGES;
+ }
+
+ // Calculate the Scatter Gather list size
+ pHba->sg_tablesize = (pHba->status_block->inbound_frame_size * 4 -40)/ sizeof(struct sg_simple_element);
+ if (pHba->sg_tablesize > SG_LIST_ELEMENTS) {
+ pHba->sg_tablesize = SG_LIST_ELEMENTS;
+ }
+
+
+#ifdef DEBUG
+ printk("dpti%d: State = ",pHba->unit);
+ switch(pHba->status_block->iop_state) {
+ case 0x01:
+ printk("INIT\n");
+ break;
+ case 0x02:
+ printk("RESET\n");
+ break;
+ case 0x04:
+ printk("HOLD\n");
+ break;
+ case 0x05:
+ printk("READY\n");
+ break;
+ case 0x08:
+ printk("OPERATIONAL\n");
+ break;
+ case 0x10:
+ printk("FAILED\n");
+ break;
+ case 0x11:
+ printk("FAULTED\n");
+ break;
+ default:
+ printk("%x (unknown!!)\n",pHba->status_block->iop_state);
+ }
+#endif
+ return 0;
+}
+
+/*
+ * Get the IOP's Logical Configuration Table
+ */
+static int adpt_i2o_lct_get(adpt_hba* pHba)
+{
+ u32 msg[8];
+ int ret;
+ u32 buf[16];
+
+ if ((pHba->lct_size == 0) || (pHba->lct == NULL)){
+ pHba->lct_size = pHba->status_block->expected_lct_size;
+ }
+ do {
+ if (pHba->lct == NULL) {
+ pHba->lct = kmalloc(pHba->lct_size, GFP_KERNEL|ADDR32);
+ if(pHba->lct == NULL) {
+ printk(KERN_CRIT "%s: Lct Get failed. Out of memory.\n",
+ pHba->name);
+ return -ENOMEM;
+ }
+ }
+ memset(pHba->lct, 0, pHba->lct_size);
+
+ msg[0] = EIGHT_WORD_MSG_SIZE|SGL_OFFSET_6;
+ msg[1] = I2O_CMD_LCT_NOTIFY<<24 | HOST_TID<<12 | ADAPTER_TID;
+ msg[2] = 0;
+ msg[3] = 0;
+ msg[4] = 0xFFFFFFFF; /* All devices */
+ msg[5] = 0x00000000; /* Report now */
+ msg[6] = 0xD0000000|pHba->lct_size;
+ msg[7] = virt_to_bus(pHba->lct);
+
+ if ((ret=adpt_i2o_post_wait(pHba, msg, sizeof(msg), 360))) {
+ printk(KERN_ERR "%s: LCT Get failed (status=%#10x.\n",
+ pHba->name, ret);
+ printk(KERN_ERR"Adaptec: Error Reading Hardware.\n");
+ return ret;
+ }
+
+ if ((pHba->lct->table_size << 2) > pHba->lct_size) {
+ pHba->lct_size = pHba->lct->table_size << 2;
+ kfree(pHba->lct);
+ pHba->lct = NULL;
+ }
+ } while (pHba->lct == NULL);
+
+ PDEBUG("%s: Hardware resource table read.\n", pHba->name);
+
+
+ // I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO;
+ if(adpt_i2o_query_scalar(pHba, 0 , 0x8000, -1, buf, sizeof(buf))>=0) {
+ pHba->FwDebugBufferSize = buf[1];
+ pHba->FwDebugBuffer_P = pHba->base_addr_virt + buf[0];
+ pHba->FwDebugFlags_P = pHba->FwDebugBuffer_P + FW_DEBUG_FLAGS_OFFSET;
+ pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P + FW_DEBUG_BLED_OFFSET;
+ pHba->FwDebugBLEDflag_P = pHba->FwDebugBLEDvalue_P + 1;
+ pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P + FW_DEBUG_STR_LENGTH_OFFSET;
+ pHba->FwDebugBuffer_P += buf[2];
+ pHba->FwDebugFlags = 0;
+ }
+
+ return 0;
+}
+
+static int adpt_i2o_build_sys_table(void)
+{
+ adpt_hba* pHba = NULL;
+ int count = 0;
+
+ sys_tbl_len = sizeof(struct i2o_sys_tbl) + // Header + IOPs
+ (hba_count) * sizeof(struct i2o_sys_tbl_entry);
+
+ if(sys_tbl)
+ kfree(sys_tbl);
+
+ sys_tbl = kmalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
+ if(!sys_tbl) {
+ printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");
+ return -ENOMEM;
+ }
+ memset(sys_tbl, 0, sys_tbl_len);
+
+ sys_tbl->num_entries = hba_count;
+ sys_tbl->version = I2OVERSION;
+ sys_tbl->change_ind = sys_tbl_ind++;
+
+ for(pHba = hba_chain; pHba; pHba = pHba->next) {
+ // Get updated Status Block so we have the latest information
+ if (adpt_i2o_status_get(pHba)) {
+ sys_tbl->num_entries--;
+ continue; // try next one
+ }
+
+ sys_tbl->iops[count].org_id = pHba->status_block->org_id;
+ sys_tbl->iops[count].iop_id = pHba->unit + 2;
+ sys_tbl->iops[count].seg_num = 0;
+ sys_tbl->iops[count].i2o_version = pHba->status_block->i2o_version;
+ sys_tbl->iops[count].iop_state = pHba->status_block->iop_state;
+ sys_tbl->iops[count].msg_type = pHba->status_block->msg_type;
+ sys_tbl->iops[count].frame_size = pHba->status_block->inbound_frame_size;
+ sys_tbl->iops[count].last_changed = sys_tbl_ind - 1; // ??
+ sys_tbl->iops[count].iop_capabilities = pHba->status_block->iop_capabilities;
+ sys_tbl->iops[count].inbound_low = (u32)virt_to_bus((void*)pHba->post_port);
+ sys_tbl->iops[count].inbound_high = (u32)((u64)virt_to_bus((void*)pHba->post_port)>>32);
+
+ count++;
+ }
+
+#ifdef DEBUG
+{
+ u32 *table = (u32*)sys_tbl;
+ printk(KERN_DEBUG"sys_tbl_len=%d in 32bit words\n",(sys_tbl_len >>2));
+ for(count = 0; count < (sys_tbl_len >>2); count++) {
+ printk(KERN_INFO "sys_tbl[%d] = %0#10x\n",
+ count, table[count]);
+ }
+}
+#endif
+
+ return 0;
+}
+
+
+/*
+ * Dump the information block associated with a given unit (TID)
+ */
+
+static void adpt_i2o_report_hba_unit(adpt_hba* pHba, struct i2o_device *d)
+{
+ char buf[64];
+ int unit = d->lct_data.tid;
+
+ printk(KERN_INFO "TID %3.3d ", unit);
+
+ if(adpt_i2o_query_scalar(pHba, unit, 0xF100, 3, buf, 16)>=0)
+ {
+ buf[16]=0;
+ printk(" Vendor: %-12.12s", buf);
+ }
+ if(adpt_i2o_query_scalar(pHba, unit, 0xF100, 4, buf, 16)>=0)
+ {
+ buf[16]=0;
+ printk(" Device: %-12.12s", buf);
+ }
+ if(adpt_i2o_query_scalar(pHba, unit, 0xF100, 6, buf, 8)>=0)
+ {
+ buf[8]=0;
+ printk(" Rev: %-12.12s\n", buf);
+ }
+#ifdef DEBUG
+ printk(KERN_INFO "\tClass: %.21s\n", adpt_i2o_get_class_name(d->lct_data.class_id));
+ printk(KERN_INFO "\tSubclass: 0x%04X\n", d->lct_data.sub_class);
+ printk(KERN_INFO "\tFlags: ");
+
+ if(d->lct_data.device_flags&(1<<0))
+ printk("C"); // ConfigDialog requested
+ if(d->lct_data.device_flags&(1<<1))
+ printk("U"); // Multi-user capable
+ if(!(d->lct_data.device_flags&(1<<4)))
+ printk("P"); // Peer service enabled!
+ if(!(d->lct_data.device_flags&(1<<5)))
+ printk("M"); // Mgmt service enabled!
+ printk("\n");
+#endif
+}
+
+#ifdef DEBUG
+/*
+ * Do i2o class name lookup
+ */
+static const char *adpt_i2o_get_class_name(int class)
+{
+ int idx = 16;
+ static char *i2o_class_name[] = {
+ "Executive",
+ "Device Driver Module",
+ "Block Device",
+ "Tape Device",
+ "LAN Interface",
+ "WAN Interface",
+ "Fibre Channel Port",
+ "Fibre Channel Device",
+ "SCSI Device",
+ "ATE Port",
+ "ATE Device",
+ "Floppy Controller",
+ "Floppy Device",
+ "Secondary Bus Port",
+ "Peer Transport Agent",
+ "Peer Transport",
+ "Unknown"
+ };
+
+ switch(class&0xFFF) {
+ case I2O_CLASS_EXECUTIVE:
+ idx = 0; break;
+ case I2O_CLASS_DDM:
+ idx = 1; break;
+ case I2O_CLASS_RANDOM_BLOCK_STORAGE:
+ idx = 2; break;
+ case I2O_CLASS_SEQUENTIAL_STORAGE:
+ idx = 3; break;
+ case I2O_CLASS_LAN:
+ idx = 4; break;
+ case I2O_CLASS_WAN:
+ idx = 5; break;
+ case I2O_CLASS_FIBRE_CHANNEL_PORT:
+ idx = 6; break;
+ case I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL:
+ idx = 7; break;
+ case I2O_CLASS_SCSI_PERIPHERAL:
+ idx = 8; break;
+ case I2O_CLASS_ATE_PORT:
+ idx = 9; break;
+ case I2O_CLASS_ATE_PERIPHERAL:
+ idx = 10; break;
+ case I2O_CLASS_FLOPPY_CONTROLLER:
+ idx = 11; break;
+ case I2O_CLASS_FLOPPY_DEVICE:
+ idx = 12; break;
+ case I2O_CLASS_BUS_ADAPTER_PORT:
+ idx = 13; break;
+ case I2O_CLASS_PEER_TRANSPORT_AGENT:
+ idx = 14; break;
+ case I2O_CLASS_PEER_TRANSPORT:
+ idx = 15; break;
+ }
+ return i2o_class_name[idx];
+}
+#endif
+
+
+static s32 adpt_i2o_hrt_get(adpt_hba* pHba)
+{
+ u32 msg[6];
+ int ret, size = sizeof(i2o_hrt);
+
+ do {
+ if (pHba->hrt == NULL) {
+ pHba->hrt=kmalloc(size, GFP_KERNEL|ADDR32);
+ if (pHba->hrt == NULL) {
+ printk(KERN_CRIT "%s: Hrt Get failed; Out of memory.\n", pHba->name);
+ return -ENOMEM;
+ }
+ }
+
+ msg[0]= SIX_WORD_MSG_SIZE| SGL_OFFSET_4;
+ msg[1]= I2O_CMD_HRT_GET<<24 | HOST_TID<<12 | ADAPTER_TID;
+ msg[2]= 0;
+ msg[3]= 0;
+ msg[4]= (0xD0000000 | size); /* Simple transaction */
+ msg[5]= virt_to_bus(pHba->hrt); /* Dump it here */
+
+ if ((ret = adpt_i2o_post_wait(pHba, msg, sizeof(msg),20))) {
+ printk(KERN_ERR "%s: Unable to get HRT (status=%#10x)\n", pHba->name, ret);
+ return ret;
+ }
+
+ if (pHba->hrt->num_entries * pHba->hrt->entry_len << 2 > size) {
+ size = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
+ kfree(pHba->hrt);
+ pHba->hrt = NULL;
+ }
+ } while(pHba->hrt == NULL);
+ return 0;
+}
+
+/*
+ * Query one scalar group value or a whole scalar group.
+ */
+static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid,
+ int group, int field, void *buf, int buflen)
+{
+ u16 opblk[] = { 1, 0, I2O_PARAMS_FIELD_GET, group, 1, field };
+ u8 *resblk;
+
+ int size;
+
+ /* 8 bytes for header */
+ resblk = kmalloc(sizeof(u8) * (8+buflen), GFP_KERNEL|ADDR32);
+ if (resblk == NULL) {
+ printk(KERN_CRIT "%s: query scalar failed; Out of memory.\n", pHba->name);
+ return -ENOMEM;
+ }
+
+ if (field == -1) /* whole group */
+ opblk[4] = -1;
+
+ size = adpt_i2o_issue_params(I2O_CMD_UTIL_PARAMS_GET, pHba, tid,
+ opblk, sizeof(opblk), resblk, sizeof(u8)*(8+buflen));
+ if (size == -ETIME) {
+ printk(KERN_WARNING "%s: issue params failed; Timed out.\n", pHba->name);
+ return -ETIME;
+ } else if (size == -EINTR) {
+ printk(KERN_WARNING "%s: issue params failed; Interrupted.\n", pHba->name);
+ return -EINTR;
+ }
+
+ memcpy(buf, resblk+8, buflen); /* cut off header */
+
+ kfree(resblk);
+ if (size < 0)
+ return size;
+
+ return buflen;
+}
+
+
+/* Issue UTIL_PARAMS_GET or UTIL_PARAMS_SET
+ *
+ * This function can be used for all UtilParamsGet/Set operations.
+ * The OperationBlock is given in opblk-buffer,
+ * and results are returned in resblk-buffer.
+ * Note that the minimum sized resblk is 8 bytes and contains
+ * ResultCount, ErrorInfoSize, BlockStatus and BlockSize.
+ */
+static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid,
+ void *opblk, int oplen, void *resblk, int reslen)
+{
+ u32 msg[9];
+ u32 *res = (u32 *)resblk;
+ int wait_status;
+
+ msg[0] = NINE_WORD_MSG_SIZE | SGL_OFFSET_5;
+ msg[1] = cmd << 24 | HOST_TID << 12 | tid;
+ msg[2] = 0;
+ msg[3] = 0;
+ msg[4] = 0;
+ msg[5] = 0x54000000 | oplen; /* OperationBlock */
+ msg[6] = virt_to_bus(opblk);
+ msg[7] = 0xD0000000 | reslen; /* ResultBlock */
+ msg[8] = virt_to_bus(resblk);
+
+ if ((wait_status = adpt_i2o_post_wait(pHba, msg, sizeof(msg), 20))) {
+ printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk);
+ return wait_status; /* -DetailedStatus */
+ }
+
+ if (res[1]&0x00FF0000) { /* BlockStatus != SUCCESS */
+ printk(KERN_WARNING "%s: %s - Error:\n ErrorInfoSize = 0x%02x, "
+ "BlockStatus = 0x%02x, BlockSize = 0x%04x\n",
+ pHba->name,
+ (cmd == I2O_CMD_UTIL_PARAMS_SET) ? "PARAMS_SET"
+ : "PARAMS_GET",
+ res[1]>>24, (res[1]>>16)&0xFF, res[1]&0xFFFF);
+ return -((res[1] >> 16) & 0xFF); /* -BlockStatus */
+ }
+
+ return 4 + ((res[1] & 0x0000FFFF) << 2); /* bytes used in resblk */
+}
+
+
+static s32 adpt_i2o_quiesce_hba(adpt_hba* pHba)
+{
+ u32 msg[4];
+ int ret;
+
+ adpt_i2o_status_get(pHba);
+
+ /* SysQuiesce discarded if IOP not in READY or OPERATIONAL state */
+
+ if((pHba->status_block->iop_state != ADAPTER_STATE_READY) &&
+ (pHba->status_block->iop_state != ADAPTER_STATE_OPERATIONAL)){
+ return 0;
+ }
+
+ msg[0] = FOUR_WORD_MSG_SIZE|SGL_OFFSET_0;
+ msg[1] = I2O_CMD_SYS_QUIESCE<<24|HOST_TID<<12|ADAPTER_TID;
+ msg[2] = 0;
+ msg[3] = 0;
+
+ if((ret = adpt_i2o_post_wait(pHba, msg, sizeof(msg), 240))) {
+ printk(KERN_INFO"dpti%d: Unable to quiesce (status=%#x).\n",
+ pHba->unit, -ret);
+ } else {
+ printk(KERN_INFO"dpti%d: Quiesced.\n",pHba->unit);
+ }
+
+ adpt_i2o_status_get(pHba);
+ return ret;
+}
+
+
+/*
+ * Enable IOP. Allows the IOP to resume external operations.
+ */
+static int adpt_i2o_enable_hba(adpt_hba* pHba)
+{
+ u32 msg[4];
+ int ret;
+
+ adpt_i2o_status_get(pHba);
+ if(!pHba->status_block){
+ return -ENOMEM;
+ }
+ /* Enable only allowed on READY state */
+ if(pHba->status_block->iop_state == ADAPTER_STATE_OPERATIONAL)
+ return 0;
+
+ if(pHba->status_block->iop_state != ADAPTER_STATE_READY)
+ return -EINVAL;
+
+ msg[0]=FOUR_WORD_MSG_SIZE|SGL_OFFSET_0;
+ msg[1]=I2O_CMD_SYS_ENABLE<<24|HOST_TID<<12|ADAPTER_TID;
+ msg[2]= 0;
+ msg[3]= 0;
+
+ if ((ret = adpt_i2o_post_wait(pHba, msg, sizeof(msg), 240))) {
+ printk(KERN_WARNING"%s: Could not enable (status=%#10x).\n",
+ pHba->name, ret);
+ } else {
+ PDEBUG("%s: Enabled.\n", pHba->name);
+ }
+
+ adpt_i2o_status_get(pHba);
+ return ret;
+}
+
+
+static int adpt_i2o_systab_send(adpt_hba* pHba)
+{
+ u32 msg[12];
+ int ret;
+
+ msg[0] = I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6;
+ msg[1] = I2O_CMD_SYS_TAB_SET<<24 | HOST_TID<<12 | ADAPTER_TID;
+ msg[2] = 0;
+ msg[3] = 0;
+ msg[4] = (0<<16) | ((pHba->unit+2) << 12); /* Host 0 IOP ID (unit + 2) */
+ msg[5] = 0; /* Segment 0 */
+
+ /*
+ * Provide three SGL-elements:
+ * System table (SysTab), Private memory space declaration and
+ * Private i/o space declaration
+ */
+ msg[6] = 0x54000000 | sys_tbl_len;
+ msg[7] = virt_to_phys(sys_tbl);
+ msg[8] = 0x54000000 | 0;
+ msg[9] = 0;
+ msg[10] = 0xD4000000 | 0;
+ msg[11] = 0;
+
+ if ((ret=adpt_i2o_post_wait(pHba, msg, sizeof(msg), 120))) {
+ printk(KERN_INFO "%s: Unable to set SysTab (status=%#10x).\n",
+ pHba->name, ret);
+ }
+#ifdef DEBUG
+ else {
+ PINFO("%s: SysTab set.\n", pHba->name);
+ }
+#endif
+
+ return ret;
+ }
+
+
+/*============================================================================
+ *
+ *============================================================================
+ */
+
+
+#ifdef UARTDELAY
+
+static static void adpt_delay(int millisec)
+{
+ int i;
+ for (i = 0; i < millisec; i++) {
+ udelay(1000); /* delay for one millisecond */
+ }
+}
+
+#endif
+
+static struct scsi_host_template driver_template = {
+ .name = "dpt_i2o",
+ .proc_name = "dpt_i2o",
+ .proc_info = adpt_proc_info,
+ .detect = adpt_detect,
+ .release = adpt_release,
+ .info = adpt_info,
+ .queuecommand = adpt_queue,
+ .eh_abort_handler = adpt_abort,
+ .eh_device_reset_handler = adpt_device_reset,
+ .eh_bus_reset_handler = adpt_bus_reset,
+ .eh_host_reset_handler = adpt_reset,
+ .bios_param = adpt_bios_param,
+ .slave_configure = adpt_slave_configure,
+ .can_queue = MAX_TO_IOP_MESSAGES,
+ .this_id = 7,
+ .cmd_per_lun = 1,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+#include "scsi_module.c"
+MODULE_LICENSE("GPL");
