Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
new file mode 100644
index 0000000..1aaa656
--- /dev/null
+++ b/drivers/scsi/BusLogic.h
@@ -0,0 +1,1359 @@
+/*
+
+ Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
+
+ Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
+
+ This program is free software; you may redistribute and/or modify it under
+ the terms of the GNU General Public License Version 2 as published by the
+ Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for complete details.
+
+ The author respectfully requests that any modifications to this software be
+ sent directly to him for evaluation and testing.
+
+ Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
+ advice has been invaluable, to David Gentzel, for writing the original Linux
+ BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
+
+ Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
+ Manager available as freely redistributable source code.
+
+*/
+
+#ifndef _BUSLOGIC_H
+#define _BUSLOGIC_H
+
+#include <linux/config.h>
+
+#ifndef PACKED
+#define PACKED __attribute__((packed))
+#endif
+
+/*
+ FlashPoint support is only available for the Intel x86 Architecture with
+ CONFIG_PCI set.
+*/
+
+#ifndef __i386__
+#undef CONFIG_SCSI_OMIT_FLASHPOINT
+#define CONFIG_SCSI_OMIT_FLASHPOINT
+#endif
+
+#ifndef CONFIG_PCI
+#undef CONFIG_SCSI_OMIT_FLASHPOINT
+#define CONFIG_SCSI_OMIT_FLASHPOINT
+#define BusLogic_InitializeProbeInfoListISA BusLogic_InitializeProbeInfoList
+#endif
+
+
+/*
+ Define the maximum number of BusLogic Host Adapters supported by this driver.
+*/
+
+#define BusLogic_MaxHostAdapters 16
+
+
+/*
+ Define the maximum number of Target Devices supported by this driver.
+*/
+
+#define BusLogic_MaxTargetDevices 16
+
+
+/*
+ Define the maximum number of Scatter/Gather Segments used by this driver.
+ For optimal performance, it is important that this limit be at least as
+ large as the largest single request generated by the I/O Subsystem.
+*/
+
+#define BusLogic_ScatterGatherLimit 128
+
+
+/*
+ Define the maximum, maximum automatic, minimum automatic, and default Queue
+ Depth to allow for Target Devices depending on whether or not they support
+ Tagged Queuing and whether or not ISA Bounce Buffers are required.
+*/
+
+#define BusLogic_MaxTaggedQueueDepth 64
+#define BusLogic_MaxAutomaticTaggedQueueDepth 28
+#define BusLogic_MinAutomaticTaggedQueueDepth 7
+#define BusLogic_TaggedQueueDepthBB 3
+#define BusLogic_UntaggedQueueDepth 3
+#define BusLogic_UntaggedQueueDepthBB 2
+
+
+/*
+ Define the default amount of time in seconds to wait between a Host Adapter
+ Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI commands.
+ Some SCSI devices get confused if they receive SCSI commands too soon after
+ a SCSI Bus Reset.
+*/
+
+#define BusLogic_DefaultBusSettleTime 2
+
+
+/*
+ Define the maximum number of Mailboxes that should be used for MultiMaster
+ Host Adapters. This number is chosen to be larger than the maximum Host
+ Adapter Queue Depth and small enough so that the Host Adapter structure
+ does not cross an allocation block size boundary.
+*/
+
+#define BusLogic_MaxMailboxes 211
+
+
+/*
+ Define the number of CCBs that should be allocated as a group to optimize
+ Kernel memory allocation.
+*/
+
+#define BusLogic_CCB_AllocationGroupSize 7
+
+
+/*
+ Define the Host Adapter Line and Message Buffer Sizes.
+*/
+
+#define BusLogic_LineBufferSize 100
+#define BusLogic_MessageBufferSize 9700
+
+
+/*
+ Define the Driver Message Levels.
+*/
+
+enum BusLogic_MessageLevel {
+ BusLogic_AnnounceLevel = 0,
+ BusLogic_InfoLevel = 1,
+ BusLogic_NoticeLevel = 2,
+ BusLogic_WarningLevel = 3,
+ BusLogic_ErrorLevel = 4
+};
+
+static char *BusLogic_MessageLevelMap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR };
+
+
+/*
+ Define Driver Message macros.
+*/
+
+#define BusLogic_Announce(Format, Arguments...) \
+ BusLogic_Message(BusLogic_AnnounceLevel, Format, ##Arguments)
+
+#define BusLogic_Info(Format, Arguments...) \
+ BusLogic_Message(BusLogic_InfoLevel, Format, ##Arguments)
+
+#define BusLogic_Notice(Format, Arguments...) \
+ BusLogic_Message(BusLogic_NoticeLevel, Format, ##Arguments)
+
+#define BusLogic_Warning(Format, Arguments...) \
+ BusLogic_Message(BusLogic_WarningLevel, Format, ##Arguments)
+
+#define BusLogic_Error(Format, Arguments...) \
+ BusLogic_Message(BusLogic_ErrorLevel, Format, ##Arguments)
+
+
+/*
+ Define the types of BusLogic Host Adapters that are supported and the number
+ of I/O Addresses required by each type.
+*/
+
+enum BusLogic_HostAdapterType {
+ BusLogic_MultiMaster = 1,
+ BusLogic_FlashPoint = 2
+} PACKED;
+
+#define BusLogic_MultiMasterAddressCount 4
+#define BusLogic_FlashPointAddressCount 256
+
+static int BusLogic_HostAdapterAddressCount[3] = { 0, BusLogic_MultiMasterAddressCount, BusLogic_FlashPointAddressCount };
+
+
+/*
+ Define macros for testing the Host Adapter Type.
+*/
+
+#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
+
+#define BusLogic_MultiMasterHostAdapterP(HostAdapter) \
+ (HostAdapter->HostAdapterType == BusLogic_MultiMaster)
+
+#define BusLogic_FlashPointHostAdapterP(HostAdapter) \
+ (HostAdapter->HostAdapterType == BusLogic_FlashPoint)
+
+#else
+
+#define BusLogic_MultiMasterHostAdapterP(HostAdapter) \
+ (true)
+
+#define BusLogic_FlashPointHostAdapterP(HostAdapter) \
+ (false)
+
+#endif
+
+
+/*
+ Define the possible Host Adapter Bus Types.
+*/
+
+enum BusLogic_HostAdapterBusType {
+ BusLogic_Unknown_Bus = 0,
+ BusLogic_ISA_Bus = 1,
+ BusLogic_EISA_Bus = 2,
+ BusLogic_PCI_Bus = 3,
+ BusLogic_VESA_Bus = 4,
+ BusLogic_MCA_Bus = 5
+} PACKED;
+
+static char *BusLogic_HostAdapterBusNames[] = { "Unknown", "ISA", "EISA", "PCI", "VESA", "MCA" };
+
+static enum BusLogic_HostAdapterBusType BusLogic_HostAdapterBusTypes[] = {
+ BusLogic_VESA_Bus, /* BT-4xx */
+ BusLogic_ISA_Bus, /* BT-5xx */
+ BusLogic_MCA_Bus, /* BT-6xx */
+ BusLogic_EISA_Bus, /* BT-7xx */
+ BusLogic_Unknown_Bus, /* BT-8xx */
+ BusLogic_PCI_Bus /* BT-9xx */
+};
+
+/*
+ Define the possible Host Adapter BIOS Disk Geometry Translations.
+*/
+
+enum BusLogic_BIOS_DiskGeometryTranslation {
+ BusLogic_BIOS_Disk_Not_Installed = 0,
+ BusLogic_BIOS_Disk_Installed_64x32 = 1,
+ BusLogic_BIOS_Disk_Installed_128x32 = 2,
+ BusLogic_BIOS_Disk_Installed_255x63 = 3
+} PACKED;
+
+
+/*
+ Define a Boolean data type.
+*/
+
+typedef enum {
+ false,
+ true
+} PACKED boolean;
+
+/*
+ Define a 10^18 Statistics Byte Counter data type.
+*/
+
+struct BusLogic_ByteCounter {
+ unsigned int Units;
+ unsigned int Billions;
+};
+
+
+/*
+ Define the structure for I/O Address and Bus Probing Information.
+*/
+
+struct BusLogic_ProbeInfo {
+ enum BusLogic_HostAdapterType HostAdapterType;
+ enum BusLogic_HostAdapterBusType HostAdapterBusType;
+ unsigned long IO_Address;
+ unsigned long PCI_Address;
+ struct pci_dev *PCI_Device;
+ unsigned char Bus;
+ unsigned char Device;
+ unsigned char IRQ_Channel;
+};
+
+/*
+ Define the Probe Options.
+*/
+
+struct BusLogic_ProbeOptions {
+ boolean NoProbe:1; /* Bit 0 */
+ boolean NoProbeISA:1; /* Bit 1 */
+ boolean NoProbePCI:1; /* Bit 2 */
+ boolean NoSortPCI:1; /* Bit 3 */
+ boolean MultiMasterFirst:1; /* Bit 4 */
+ boolean FlashPointFirst:1; /* Bit 5 */
+ boolean LimitedProbeISA:1; /* Bit 6 */
+ boolean Probe330:1; /* Bit 7 */
+ boolean Probe334:1; /* Bit 8 */
+ boolean Probe230:1; /* Bit 9 */
+ boolean Probe234:1; /* Bit 10 */
+ boolean Probe130:1; /* Bit 11 */
+ boolean Probe134:1; /* Bit 12 */
+};
+
+/*
+ Define the Global Options.
+*/
+
+struct BusLogic_GlobalOptions {
+ boolean TraceProbe:1; /* Bit 0 */
+ boolean TraceHardwareReset:1; /* Bit 1 */
+ boolean TraceConfiguration:1; /* Bit 2 */
+ boolean TraceErrors:1; /* Bit 3 */
+};
+
+/*
+ Define the Local Options.
+*/
+
+struct BusLogic_LocalOptions {
+ boolean InhibitTargetInquiry:1; /* Bit 0 */
+};
+
+/*
+ Define the BusLogic SCSI Host Adapter I/O Register Offsets.
+*/
+
+#define BusLogic_ControlRegisterOffset 0 /* WO register */
+#define BusLogic_StatusRegisterOffset 0 /* RO register */
+#define BusLogic_CommandParameterRegisterOffset 1 /* WO register */
+#define BusLogic_DataInRegisterOffset 1 /* RO register */
+#define BusLogic_InterruptRegisterOffset 2 /* RO register */
+#define BusLogic_GeometryRegisterOffset 3 /* RO register */
+
+/*
+ Define the structure of the write-only Control Register.
+*/
+
+union BusLogic_ControlRegister {
+ unsigned char All;
+ struct {
+ unsigned char:4; /* Bits 0-3 */
+ boolean SCSIBusReset:1; /* Bit 4 */
+ boolean InterruptReset:1; /* Bit 5 */
+ boolean SoftReset:1; /* Bit 6 */
+ boolean HardReset:1; /* Bit 7 */
+ } cr;
+};
+
+/*
+ Define the structure of the read-only Status Register.
+*/
+
+union BusLogic_StatusRegister {
+ unsigned char All;
+ struct {
+ boolean CommandInvalid:1; /* Bit 0 */
+ boolean Reserved:1; /* Bit 1 */
+ boolean DataInRegisterReady:1; /* Bit 2 */
+ boolean CommandParameterRegisterBusy:1; /* Bit 3 */
+ boolean HostAdapterReady:1; /* Bit 4 */
+ boolean InitializationRequired:1; /* Bit 5 */
+ boolean DiagnosticFailure:1; /* Bit 6 */
+ boolean DiagnosticActive:1; /* Bit 7 */
+ } sr;
+};
+
+/*
+ Define the structure of the read-only Interrupt Register.
+*/
+
+union BusLogic_InterruptRegister {
+ unsigned char All;
+ struct {
+ boolean IncomingMailboxLoaded:1; /* Bit 0 */
+ boolean OutgoingMailboxAvailable:1; /* Bit 1 */
+ boolean CommandComplete:1; /* Bit 2 */
+ boolean ExternalBusReset:1; /* Bit 3 */
+ unsigned char Reserved:3; /* Bits 4-6 */
+ boolean InterruptValid:1; /* Bit 7 */
+ } ir;
+};
+
+/*
+ Define the structure of the read-only Geometry Register.
+*/
+
+union BusLogic_GeometryRegister {
+ unsigned char All;
+ struct {
+ enum BusLogic_BIOS_DiskGeometryTranslation Drive0Geometry:2; /* Bits 0-1 */
+ enum BusLogic_BIOS_DiskGeometryTranslation Drive1Geometry:2; /* Bits 2-3 */
+ unsigned char:3; /* Bits 4-6 */
+ boolean ExtendedTranslationEnabled:1; /* Bit 7 */
+ } gr;
+};
+
+/*
+ Define the BusLogic SCSI Host Adapter Command Register Operation Codes.
+*/
+
+enum BusLogic_OperationCode {
+ BusLogic_TestCommandCompleteInterrupt = 0x00,
+ BusLogic_InitializeMailbox = 0x01,
+ BusLogic_ExecuteMailboxCommand = 0x02,
+ BusLogic_ExecuteBIOSCommand = 0x03,
+ BusLogic_InquireBoardID = 0x04,
+ BusLogic_EnableOutgoingMailboxAvailableInt = 0x05,
+ BusLogic_SetSCSISelectionTimeout = 0x06,
+ BusLogic_SetPreemptTimeOnBus = 0x07,
+ BusLogic_SetTimeOffBus = 0x08,
+ BusLogic_SetBusTransferRate = 0x09,
+ BusLogic_InquireInstalledDevicesID0to7 = 0x0A,
+ BusLogic_InquireConfiguration = 0x0B,
+ BusLogic_EnableTargetMode = 0x0C,
+ BusLogic_InquireSetupInformation = 0x0D,
+ BusLogic_WriteAdapterLocalRAM = 0x1A,
+ BusLogic_ReadAdapterLocalRAM = 0x1B,
+ BusLogic_WriteBusMasterChipFIFO = 0x1C,
+ BusLogic_ReadBusMasterChipFIFO = 0x1D,
+ BusLogic_EchoCommandData = 0x1F,
+ BusLogic_HostAdapterDiagnostic = 0x20,
+ BusLogic_SetAdapterOptions = 0x21,
+ BusLogic_InquireInstalledDevicesID8to15 = 0x23,
+ BusLogic_InquireTargetDevices = 0x24,
+ BusLogic_DisableHostAdapterInterrupt = 0x25,
+ BusLogic_InitializeExtendedMailbox = 0x81,
+ BusLogic_ExecuteSCSICommand = 0x83,
+ BusLogic_InquireFirmwareVersion3rdDigit = 0x84,
+ BusLogic_InquireFirmwareVersionLetter = 0x85,
+ BusLogic_InquirePCIHostAdapterInformation = 0x86,
+ BusLogic_InquireHostAdapterModelNumber = 0x8B,
+ BusLogic_InquireSynchronousPeriod = 0x8C,
+ BusLogic_InquireExtendedSetupInformation = 0x8D,
+ BusLogic_EnableStrictRoundRobinMode = 0x8F,
+ BusLogic_StoreHostAdapterLocalRAM = 0x90,
+ BusLogic_FetchHostAdapterLocalRAM = 0x91,
+ BusLogic_StoreLocalDataInEEPROM = 0x92,
+ BusLogic_UploadAutoSCSICode = 0x94,
+ BusLogic_ModifyIOAddress = 0x95,
+ BusLogic_SetCCBFormat = 0x96,
+ BusLogic_WriteInquiryBuffer = 0x9A,
+ BusLogic_ReadInquiryBuffer = 0x9B,
+ BusLogic_FlashROMUploadDownload = 0xA7,
+ BusLogic_ReadSCAMData = 0xA8,
+ BusLogic_WriteSCAMData = 0xA9
+};
+
+/*
+ Define the Inquire Board ID reply structure.
+*/
+
+struct BusLogic_BoardID {
+ unsigned char BoardType; /* Byte 0 */
+ unsigned char CustomFeatures; /* Byte 1 */
+ unsigned char FirmwareVersion1stDigit; /* Byte 2 */
+ unsigned char FirmwareVersion2ndDigit; /* Byte 3 */
+};
+
+/*
+ Define the Inquire Configuration reply structure.
+*/
+
+struct BusLogic_Configuration {
+ unsigned char:5; /* Byte 0 Bits 0-4 */
+ boolean DMA_Channel5:1; /* Byte 0 Bit 5 */
+ boolean DMA_Channel6:1; /* Byte 0 Bit 6 */
+ boolean DMA_Channel7:1; /* Byte 0 Bit 7 */
+ boolean IRQ_Channel9:1; /* Byte 1 Bit 0 */
+ boolean IRQ_Channel10:1; /* Byte 1 Bit 1 */
+ boolean IRQ_Channel11:1; /* Byte 1 Bit 2 */
+ boolean IRQ_Channel12:1; /* Byte 1 Bit 3 */
+ unsigned char:1; /* Byte 1 Bit 4 */
+ boolean IRQ_Channel14:1; /* Byte 1 Bit 5 */
+ boolean IRQ_Channel15:1; /* Byte 1 Bit 6 */
+ unsigned char:1; /* Byte 1 Bit 7 */
+ unsigned char HostAdapterID:4; /* Byte 2 Bits 0-3 */
+ unsigned char:4; /* Byte 2 Bits 4-7 */
+};
+
+/*
+ Define the Inquire Setup Information reply structure.
+*/
+
+struct BusLogic_SynchronousValue {
+ unsigned char Offset:4; /* Bits 0-3 */
+ unsigned char TransferPeriod:3; /* Bits 4-6 */
+ boolean Synchronous:1; /* Bit 7 */
+};
+
+struct BusLogic_SetupInformation {
+ boolean SynchronousInitiationEnabled:1; /* Byte 0 Bit 0 */
+ boolean ParityCheckingEnabled:1; /* Byte 0 Bit 1 */
+ unsigned char:6; /* Byte 0 Bits 2-7 */
+ unsigned char BusTransferRate; /* Byte 1 */
+ unsigned char PreemptTimeOnBus; /* Byte 2 */
+ unsigned char TimeOffBus; /* Byte 3 */
+ unsigned char MailboxCount; /* Byte 4 */
+ unsigned char MailboxAddress[3]; /* Bytes 5-7 */
+ struct BusLogic_SynchronousValue SynchronousValuesID0to7[8]; /* Bytes 8-15 */
+ unsigned char DisconnectPermittedID0to7; /* Byte 16 */
+ unsigned char Signature; /* Byte 17 */
+ unsigned char CharacterD; /* Byte 18 */
+ unsigned char HostBusType; /* Byte 19 */
+ unsigned char WideTransfersPermittedID0to7; /* Byte 20 */
+ unsigned char WideTransfersActiveID0to7; /* Byte 21 */
+ struct BusLogic_SynchronousValue SynchronousValuesID8to15[8]; /* Bytes 22-29 */
+ unsigned char DisconnectPermittedID8to15; /* Byte 30 */
+ unsigned char:8; /* Byte 31 */
+ unsigned char WideTransfersPermittedID8to15; /* Byte 32 */
+ unsigned char WideTransfersActiveID8to15; /* Byte 33 */
+};
+
+/*
+ Define the Initialize Extended Mailbox request structure.
+*/
+
+struct BusLogic_ExtendedMailboxRequest {
+ unsigned char MailboxCount; /* Byte 0 */
+ u32 BaseMailboxAddress; /* Bytes 1-4 */
+} PACKED;
+
+
+/*
+ Define the Inquire PCI Host Adapter Information reply type. The ISA
+ Compatible I/O Port values are defined here and are also used with
+ the Modify I/O Address command.
+*/
+
+enum BusLogic_ISACompatibleIOPort {
+ BusLogic_IO_330 = 0,
+ BusLogic_IO_334 = 1,
+ BusLogic_IO_230 = 2,
+ BusLogic_IO_234 = 3,
+ BusLogic_IO_130 = 4,
+ BusLogic_IO_134 = 5,
+ BusLogic_IO_Disable = 6,
+ BusLogic_IO_Disable2 = 7
+} PACKED;
+
+struct BusLogic_PCIHostAdapterInformation {
+ enum BusLogic_ISACompatibleIOPort ISACompatibleIOPort; /* Byte 0 */
+ unsigned char PCIAssignedIRQChannel; /* Byte 1 */
+ boolean LowByteTerminated:1; /* Byte 2 Bit 0 */
+ boolean HighByteTerminated:1; /* Byte 2 Bit 1 */
+ unsigned char:2; /* Byte 2 Bits 2-3 */
+ boolean JP1:1; /* Byte 2 Bit 4 */
+ boolean JP2:1; /* Byte 2 Bit 5 */
+ boolean JP3:1; /* Byte 2 Bit 6 */
+ boolean GenericInfoValid:1; /* Byte 2 Bit 7 */
+ unsigned char:8; /* Byte 3 */
+};
+
+/*
+ Define the Inquire Extended Setup Information reply structure.
+*/
+
+struct BusLogic_ExtendedSetupInformation {
+ unsigned char BusType; /* Byte 0 */
+ unsigned char BIOS_Address; /* Byte 1 */
+ unsigned short ScatterGatherLimit; /* Bytes 2-3 */
+ unsigned char MailboxCount; /* Byte 4 */
+ u32 BaseMailboxAddress; /* Bytes 5-8 */
+ struct {
+ unsigned char:2; /* Byte 9 Bits 0-1 */
+ boolean FastOnEISA:1; /* Byte 9 Bit 2 */
+ unsigned char:3; /* Byte 9 Bits 3-5 */
+ boolean LevelSensitiveInterrupt:1; /* Byte 9 Bit 6 */
+ unsigned char:1; /* Byte 9 Bit 7 */
+ } Misc;
+ unsigned char FirmwareRevision[3]; /* Bytes 10-12 */
+ boolean HostWideSCSI:1; /* Byte 13 Bit 0 */
+ boolean HostDifferentialSCSI:1; /* Byte 13 Bit 1 */
+ boolean HostSupportsSCAM:1; /* Byte 13 Bit 2 */
+ boolean HostUltraSCSI:1; /* Byte 13 Bit 3 */
+ boolean HostSmartTermination:1; /* Byte 13 Bit 4 */
+ unsigned char:3; /* Byte 13 Bits 5-7 */
+} PACKED;
+
+/*
+ Define the Enable Strict Round Robin Mode request type.
+*/
+
+enum BusLogic_RoundRobinModeRequest {
+ BusLogic_AggressiveRoundRobinMode = 0,
+ BusLogic_StrictRoundRobinMode = 1
+} PACKED;
+
+
+/*
+ Define the Fetch Host Adapter Local RAM request type.
+*/
+
+#define BusLogic_BIOS_BaseOffset 0
+#define BusLogic_AutoSCSI_BaseOffset 64
+
+struct BusLogic_FetchHostAdapterLocalRAMRequest {
+ unsigned char ByteOffset; /* Byte 0 */
+ unsigned char ByteCount; /* Byte 1 */
+};
+
+/*
+ Define the Host Adapter Local RAM AutoSCSI structure.
+*/
+
+struct BusLogic_AutoSCSIData {
+ unsigned char InternalFactorySignature[2]; /* Bytes 0-1 */
+ unsigned char InformationByteCount; /* Byte 2 */
+ unsigned char HostAdapterType[6]; /* Bytes 3-8 */
+ unsigned char:8; /* Byte 9 */
+ boolean FloppyEnabled:1; /* Byte 10 Bit 0 */
+ boolean FloppySecondary:1; /* Byte 10 Bit 1 */
+ boolean LevelSensitiveInterrupt:1; /* Byte 10 Bit 2 */
+ unsigned char:2; /* Byte 10 Bits 3-4 */
+ unsigned char SystemRAMAreaForBIOS:3; /* Byte 10 Bits 5-7 */
+ unsigned char DMA_Channel:7; /* Byte 11 Bits 0-6 */
+ boolean DMA_AutoConfiguration:1; /* Byte 11 Bit 7 */
+ unsigned char IRQ_Channel:7; /* Byte 12 Bits 0-6 */
+ boolean IRQ_AutoConfiguration:1; /* Byte 12 Bit 7 */
+ unsigned char DMA_TransferRate; /* Byte 13 */
+ unsigned char SCSI_ID; /* Byte 14 */
+ boolean LowByteTerminated:1; /* Byte 15 Bit 0 */
+ boolean ParityCheckingEnabled:1; /* Byte 15 Bit 1 */
+ boolean HighByteTerminated:1; /* Byte 15 Bit 2 */
+ boolean NoisyCablingEnvironment:1; /* Byte 15 Bit 3 */
+ boolean FastSynchronousNegotiation:1; /* Byte 15 Bit 4 */
+ boolean BusResetEnabled:1; /* Byte 15 Bit 5 */
+ boolean:1; /* Byte 15 Bit 6 */
+ boolean ActiveNegationEnabled:1; /* Byte 15 Bit 7 */
+ unsigned char BusOnDelay; /* Byte 16 */
+ unsigned char BusOffDelay; /* Byte 17 */
+ boolean HostAdapterBIOSEnabled:1; /* Byte 18 Bit 0 */
+ boolean BIOSRedirectionOfINT19Enabled:1; /* Byte 18 Bit 1 */
+ boolean ExtendedTranslationEnabled:1; /* Byte 18 Bit 2 */
+ boolean MapRemovableAsFixedEnabled:1; /* Byte 18 Bit 3 */
+ boolean:1; /* Byte 18 Bit 4 */
+ boolean BIOSSupportsMoreThan2DrivesEnabled:1; /* Byte 18 Bit 5 */
+ boolean BIOSInterruptModeEnabled:1; /* Byte 18 Bit 6 */
+ boolean FlopticalSupportEnabled:1; /* Byte 19 Bit 7 */
+ unsigned short DeviceEnabled; /* Bytes 19-20 */
+ unsigned short WidePermitted; /* Bytes 21-22 */
+ unsigned short FastPermitted; /* Bytes 23-24 */
+ unsigned short SynchronousPermitted; /* Bytes 25-26 */
+ unsigned short DisconnectPermitted; /* Bytes 27-28 */
+ unsigned short SendStartUnitCommand; /* Bytes 29-30 */
+ unsigned short IgnoreInBIOSScan; /* Bytes 31-32 */
+ unsigned char PCIInterruptPin:2; /* Byte 33 Bits 0-1 */
+ unsigned char HostAdapterIOPortAddress:2; /* Byte 33 Bits 2-3 */
+ boolean StrictRoundRobinModeEnabled:1; /* Byte 33 Bit 4 */
+ boolean VESABusSpeedGreaterThan33MHz:1; /* Byte 33 Bit 5 */
+ boolean VESABurstWriteEnabled:1; /* Byte 33 Bit 6 */
+ boolean VESABurstReadEnabled:1; /* Byte 33 Bit 7 */
+ unsigned short UltraPermitted; /* Bytes 34-35 */
+ unsigned int:32; /* Bytes 36-39 */
+ unsigned char:8; /* Byte 40 */
+ unsigned char AutoSCSIMaximumLUN; /* Byte 41 */
+ boolean:1; /* Byte 42 Bit 0 */
+ boolean SCAM_Dominant:1; /* Byte 42 Bit 1 */
+ boolean SCAM_Enabled:1; /* Byte 42 Bit 2 */
+ boolean SCAM_Level2:1; /* Byte 42 Bit 3 */
+ unsigned char:4; /* Byte 42 Bits 4-7 */
+ boolean INT13ExtensionEnabled:1; /* Byte 43 Bit 0 */
+ boolean:1; /* Byte 43 Bit 1 */
+ boolean CDROMBootEnabled:1; /* Byte 43 Bit 2 */
+ unsigned char:5; /* Byte 43 Bits 3-7 */
+ unsigned char BootTargetID:4; /* Byte 44 Bits 0-3 */
+ unsigned char BootChannel:4; /* Byte 44 Bits 4-7 */
+ unsigned char ForceBusDeviceScanningOrder:1; /* Byte 45 Bit 0 */
+ unsigned char:7; /* Byte 45 Bits 1-7 */
+ unsigned short NonTaggedToAlternateLUNPermitted; /* Bytes 46-47 */
+ unsigned short RenegotiateSyncAfterCheckCondition; /* Bytes 48-49 */
+ unsigned char Reserved[10]; /* Bytes 50-59 */
+ unsigned char ManufacturingDiagnostic[2]; /* Bytes 60-61 */
+ unsigned short Checksum; /* Bytes 62-63 */
+} PACKED;
+
+/*
+ Define the Host Adapter Local RAM Auto SCSI Byte 45 structure.
+*/
+
+struct BusLogic_AutoSCSIByte45 {
+ unsigned char ForceBusDeviceScanningOrder:1; /* Bit 0 */
+ unsigned char:7; /* Bits 1-7 */
+};
+
+/*
+ Define the Host Adapter Local RAM BIOS Drive Map Byte structure.
+*/
+
+#define BusLogic_BIOS_DriveMapOffset 17
+
+struct BusLogic_BIOSDriveMapByte {
+ unsigned char TargetIDBit3:1; /* Bit 0 */
+ unsigned char:2; /* Bits 1-2 */
+ enum BusLogic_BIOS_DiskGeometryTranslation DiskGeometry:2; /* Bits 3-4 */
+ unsigned char TargetID:3; /* Bits 5-7 */
+};
+
+/*
+ Define the Set CCB Format request type. Extended LUN Format CCBs are
+ necessary to support more than 8 Logical Units per Target Device.
+*/
+
+enum BusLogic_SetCCBFormatRequest {
+ BusLogic_LegacyLUNFormatCCB = 0,
+ BusLogic_ExtendedLUNFormatCCB = 1
+} PACKED;
+
+/*
+ Define the Outgoing Mailbox Action Codes.
+*/
+
+enum BusLogic_ActionCode {
+ BusLogic_OutgoingMailboxFree = 0x00,
+ BusLogic_MailboxStartCommand = 0x01,
+ BusLogic_MailboxAbortCommand = 0x02
+} PACKED;
+
+
+/*
+ Define the Incoming Mailbox Completion Codes. The MultiMaster Firmware
+ only uses codes 0 - 4. The FlashPoint SCCB Manager has no mailboxes, so
+ completion codes are stored in the CCB; it only uses codes 1, 2, 4, and 5.
+*/
+
+enum BusLogic_CompletionCode {
+ BusLogic_IncomingMailboxFree = 0x00,
+ BusLogic_CommandCompletedWithoutError = 0x01,
+ BusLogic_CommandAbortedAtHostRequest = 0x02,
+ BusLogic_AbortedCommandNotFound = 0x03,
+ BusLogic_CommandCompletedWithError = 0x04,
+ BusLogic_InvalidCCB = 0x05
+} PACKED;
+
+/*
+ Define the Command Control Block (CCB) Opcodes.
+*/
+
+enum BusLogic_CCB_Opcode {
+ BusLogic_InitiatorCCB = 0x00,
+ BusLogic_TargetCCB = 0x01,
+ BusLogic_InitiatorCCB_ScatterGather = 0x02,
+ BusLogic_InitiatorCCB_ResidualDataLength = 0x03,
+ BusLogic_InitiatorCCB_ScatterGatherResidual = 0x04,
+ BusLogic_BusDeviceReset = 0x81
+} PACKED;
+
+
+/*
+ Define the CCB Data Direction Codes.
+*/
+
+enum BusLogic_DataDirection {
+ BusLogic_UncheckedDataTransfer = 0,
+ BusLogic_DataInLengthChecked = 1,
+ BusLogic_DataOutLengthChecked = 2,
+ BusLogic_NoDataTransfer = 3
+};
+
+
+/*
+ Define the Host Adapter Status Codes. The MultiMaster Firmware does not
+ return status code 0x0C; it uses 0x12 for both overruns and underruns.
+*/
+
+enum BusLogic_HostAdapterStatus {
+ BusLogic_CommandCompletedNormally = 0x00,
+ BusLogic_LinkedCommandCompleted = 0x0A,
+ BusLogic_LinkedCommandCompletedWithFlag = 0x0B,
+ BusLogic_DataUnderRun = 0x0C,
+ BusLogic_SCSISelectionTimeout = 0x11,
+ BusLogic_DataOverRun = 0x12,
+ BusLogic_UnexpectedBusFree = 0x13,
+ BusLogic_InvalidBusPhaseRequested = 0x14,
+ BusLogic_InvalidOutgoingMailboxActionCode = 0x15,
+ BusLogic_InvalidCommandOperationCode = 0x16,
+ BusLogic_LinkedCCBhasInvalidLUN = 0x17,
+ BusLogic_InvalidCommandParameter = 0x1A,
+ BusLogic_AutoRequestSenseFailed = 0x1B,
+ BusLogic_TaggedQueuingMessageRejected = 0x1C,
+ BusLogic_UnsupportedMessageReceived = 0x1D,
+ BusLogic_HostAdapterHardwareFailed = 0x20,
+ BusLogic_TargetFailedResponseToATN = 0x21,
+ BusLogic_HostAdapterAssertedRST = 0x22,
+ BusLogic_OtherDeviceAssertedRST = 0x23,
+ BusLogic_TargetDeviceReconnectedImproperly = 0x24,
+ BusLogic_HostAdapterAssertedBusDeviceReset = 0x25,
+ BusLogic_AbortQueueGenerated = 0x26,
+ BusLogic_HostAdapterSoftwareError = 0x27,
+ BusLogic_HostAdapterHardwareTimeoutError = 0x30,
+ BusLogic_SCSIParityErrorDetected = 0x34
+} PACKED;
+
+
+/*
+ Define the SCSI Target Device Status Codes.
+*/
+
+enum BusLogic_TargetDeviceStatus {
+ BusLogic_OperationGood = 0x00,
+ BusLogic_CheckCondition = 0x02,
+ BusLogic_DeviceBusy = 0x08
+} PACKED;
+
+/*
+ Define the Queue Tag Codes.
+*/
+
+enum BusLogic_QueueTag {
+ BusLogic_SimpleQueueTag = 0,
+ BusLogic_HeadOfQueueTag = 1,
+ BusLogic_OrderedQueueTag = 2,
+ BusLogic_ReservedQT = 3
+};
+
+/*
+ Define the SCSI Command Descriptor Block (CDB).
+*/
+
+#define BusLogic_CDB_MaxLength 12
+
+typedef unsigned char SCSI_CDB_T[BusLogic_CDB_MaxLength];
+
+
+/*
+ Define the Scatter/Gather Segment structure required by the MultiMaster
+ Firmware Interface and the FlashPoint SCCB Manager.
+*/
+
+struct BusLogic_ScatterGatherSegment {
+ u32 SegmentByteCount; /* Bytes 0-3 */
+ u32 SegmentDataPointer; /* Bytes 4-7 */
+};
+
+/*
+ Define the Driver CCB Status Codes.
+*/
+
+enum BusLogic_CCB_Status {
+ BusLogic_CCB_Free = 0,
+ BusLogic_CCB_Active = 1,
+ BusLogic_CCB_Completed = 2,
+ BusLogic_CCB_Reset = 3
+} PACKED;
+
+
+/*
+ Define the 32 Bit Mode Command Control Block (CCB) structure. The first 40
+ bytes are defined by and common to both the MultiMaster Firmware and the
+ FlashPoint SCCB Manager. The next 60 bytes are defined by the FlashPoint
+ SCCB Manager. The remaining components are defined by the Linux BusLogic
+ Driver. Extended LUN Format CCBs differ from Legacy LUN Format 32 Bit Mode
+ CCBs only in having the TagEnable and QueueTag fields moved from byte 17 to
+ byte 1, and the Logical Unit field in byte 17 expanded to 6 bits. In theory,
+ Extended LUN Format CCBs can support up to 64 Logical Units, but in practice
+ many devices will respond improperly to Logical Units between 32 and 63, and
+ the SCSI-2 specification defines Bit 5 as LUNTAR. Extended LUN Format CCBs
+ are used by recent versions of the MultiMaster Firmware, as well as by the
+ FlashPoint SCCB Manager; the FlashPoint SCCB Manager only supports 32 Logical
+ Units. Since 64 Logical Units are unlikely to be needed in practice, and
+ since they are problematic for the above reasons, and since limiting them to
+ 5 bits simplifies the CCB structure definition, this driver only supports
+ 32 Logical Units per Target Device.
+*/
+
+struct BusLogic_CCB {
+ /*
+ MultiMaster Firmware and FlashPoint SCCB Manager Common Portion.
+ */
+ enum BusLogic_CCB_Opcode Opcode; /* Byte 0 */
+ unsigned char:3; /* Byte 1 Bits 0-2 */
+ enum BusLogic_DataDirection DataDirection:2; /* Byte 1 Bits 3-4 */
+ boolean TagEnable:1; /* Byte 1 Bit 5 */
+ enum BusLogic_QueueTag QueueTag:2; /* Byte 1 Bits 6-7 */
+ unsigned char CDB_Length; /* Byte 2 */
+ unsigned char SenseDataLength; /* Byte 3 */
+ u32 DataLength; /* Bytes 4-7 */
+ u32 DataPointer; /* Bytes 8-11 */
+ unsigned char:8; /* Byte 12 */
+ unsigned char:8; /* Byte 13 */
+ enum BusLogic_HostAdapterStatus HostAdapterStatus; /* Byte 14 */
+ enum BusLogic_TargetDeviceStatus TargetDeviceStatus; /* Byte 15 */
+ unsigned char TargetID; /* Byte 16 */
+ unsigned char LogicalUnit:5; /* Byte 17 Bits 0-4 */
+ boolean LegacyTagEnable:1; /* Byte 17 Bit 5 */
+ enum BusLogic_QueueTag LegacyQueueTag:2; /* Byte 17 Bits 6-7 */
+ SCSI_CDB_T CDB; /* Bytes 18-29 */
+ unsigned char:8; /* Byte 30 */
+ unsigned char:8; /* Byte 31 */
+ unsigned int:32; /* Bytes 32-35 */
+ u32 SenseDataPointer; /* Bytes 36-39 */
+ /*
+ FlashPoint SCCB Manager Defined Portion.
+ */
+ void (*CallbackFunction) (struct BusLogic_CCB *); /* Bytes 40-43 */
+ u32 BaseAddress; /* Bytes 44-47 */
+ enum BusLogic_CompletionCode CompletionCode; /* Byte 48 */
+#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
+ unsigned char:8; /* Byte 49 */
+ unsigned short OS_Flags; /* Bytes 50-51 */
+ unsigned char Private[48]; /* Bytes 52-99 */
+#endif
+ /*
+ BusLogic Linux Driver Defined Portion.
+ */
+ dma_addr_t AllocationGroupHead;
+ unsigned int AllocationGroupSize;
+ u32 DMA_Handle;
+ enum BusLogic_CCB_Status Status;
+ unsigned long SerialNumber;
+ struct scsi_cmnd *Command;
+ struct BusLogic_HostAdapter *HostAdapter;
+ struct BusLogic_CCB *Next;
+ struct BusLogic_CCB *NextAll;
+ struct BusLogic_ScatterGatherSegment
+ ScatterGatherList[BusLogic_ScatterGatherLimit];
+};
+
+/*
+ Define the 32 Bit Mode Outgoing Mailbox structure.
+*/
+
+struct BusLogic_OutgoingMailbox {
+ u32 CCB; /* Bytes 0-3 */
+ unsigned int:24; /* Bytes 4-6 */
+ enum BusLogic_ActionCode ActionCode; /* Byte 7 */
+};
+
+/*
+ Define the 32 Bit Mode Incoming Mailbox structure.
+*/
+
+struct BusLogic_IncomingMailbox {
+ u32 CCB; /* Bytes 0-3 */
+ enum BusLogic_HostAdapterStatus HostAdapterStatus; /* Byte 4 */
+ enum BusLogic_TargetDeviceStatus TargetDeviceStatus; /* Byte 5 */
+ unsigned char:8; /* Byte 6 */
+ enum BusLogic_CompletionCode CompletionCode; /* Byte 7 */
+};
+
+
+/*
+ Define the BusLogic Driver Options structure.
+*/
+
+struct BusLogic_DriverOptions {
+ unsigned short TaggedQueuingPermitted;
+ unsigned short TaggedQueuingPermittedMask;
+ unsigned short BusSettleTime;
+ struct BusLogic_LocalOptions LocalOptions;
+ unsigned char CommonQueueDepth;
+ unsigned char QueueDepth[BusLogic_MaxTargetDevices];
+};
+
+/*
+ Define the Host Adapter Target Flags structure.
+*/
+
+struct BusLogic_TargetFlags {
+ boolean TargetExists:1;
+ boolean TaggedQueuingSupported:1;
+ boolean WideTransfersSupported:1;
+ boolean TaggedQueuingActive:1;
+ boolean WideTransfersActive:1;
+ boolean CommandSuccessfulFlag:1;
+ boolean TargetInfoReported:1;
+};
+
+/*
+ Define the Host Adapter Target Statistics structure.
+*/
+
+#define BusLogic_SizeBuckets 10
+
+typedef unsigned int BusLogic_CommandSizeBuckets_T[BusLogic_SizeBuckets];
+
+struct BusLogic_TargetStatistics {
+ unsigned int CommandsAttempted;
+ unsigned int CommandsCompleted;
+ unsigned int ReadCommands;
+ unsigned int WriteCommands;
+ struct BusLogic_ByteCounter TotalBytesRead;
+ struct BusLogic_ByteCounter TotalBytesWritten;
+ BusLogic_CommandSizeBuckets_T ReadCommandSizeBuckets;
+ BusLogic_CommandSizeBuckets_T WriteCommandSizeBuckets;
+ unsigned short CommandAbortsRequested;
+ unsigned short CommandAbortsAttempted;
+ unsigned short CommandAbortsCompleted;
+ unsigned short BusDeviceResetsRequested;
+ unsigned short BusDeviceResetsAttempted;
+ unsigned short BusDeviceResetsCompleted;
+ unsigned short HostAdapterResetsRequested;
+ unsigned short HostAdapterResetsAttempted;
+ unsigned short HostAdapterResetsCompleted;
+};
+
+/*
+ Define the FlashPoint Card Handle data type.
+*/
+
+#define FlashPoint_BadCardHandle 0xFFFFFFFF
+
+typedef unsigned int FlashPoint_CardHandle_T;
+
+
+/*
+ Define the FlashPoint Information structure. This structure is defined
+ by the FlashPoint SCCB Manager.
+*/
+
+struct FlashPoint_Info {
+ u32 BaseAddress; /* Bytes 0-3 */
+ boolean Present; /* Byte 4 */
+ unsigned char IRQ_Channel; /* Byte 5 */
+ unsigned char SCSI_ID; /* Byte 6 */
+ unsigned char SCSI_LUN; /* Byte 7 */
+ unsigned short FirmwareRevision; /* Bytes 8-9 */
+ unsigned short SynchronousPermitted; /* Bytes 10-11 */
+ unsigned short FastPermitted; /* Bytes 12-13 */
+ unsigned short UltraPermitted; /* Bytes 14-15 */
+ unsigned short DisconnectPermitted; /* Bytes 16-17 */
+ unsigned short WidePermitted; /* Bytes 18-19 */
+ boolean ParityCheckingEnabled:1; /* Byte 20 Bit 0 */
+ boolean HostWideSCSI:1; /* Byte 20 Bit 1 */
+ boolean HostSoftReset:1; /* Byte 20 Bit 2 */
+ boolean ExtendedTranslationEnabled:1; /* Byte 20 Bit 3 */
+ boolean LowByteTerminated:1; /* Byte 20 Bit 4 */
+ boolean HighByteTerminated:1; /* Byte 20 Bit 5 */
+ boolean ReportDataUnderrun:1; /* Byte 20 Bit 6 */
+ boolean SCAM_Enabled:1; /* Byte 20 Bit 7 */
+ boolean SCAM_Level2:1; /* Byte 21 Bit 0 */
+ unsigned char:7; /* Byte 21 Bits 1-7 */
+ unsigned char Family; /* Byte 22 */
+ unsigned char BusType; /* Byte 23 */
+ unsigned char ModelNumber[3]; /* Bytes 24-26 */
+ unsigned char RelativeCardNumber; /* Byte 27 */
+ unsigned char Reserved[4]; /* Bytes 28-31 */
+ unsigned int OS_Reserved; /* Bytes 32-35 */
+ unsigned char TranslationInfo[4]; /* Bytes 36-39 */
+ unsigned int Reserved2[5]; /* Bytes 40-59 */
+ unsigned int SecondaryRange; /* Bytes 60-63 */
+};
+
+/*
+ Define the BusLogic Driver Host Adapter structure.
+*/
+
+struct BusLogic_HostAdapter {
+ struct Scsi_Host *SCSI_Host;
+ struct pci_dev *PCI_Device;
+ enum BusLogic_HostAdapterType HostAdapterType;
+ enum BusLogic_HostAdapterBusType HostAdapterBusType;
+ unsigned long IO_Address;
+ unsigned long PCI_Address;
+ unsigned short AddressCount;
+ unsigned char HostNumber;
+ unsigned char ModelName[9];
+ unsigned char FirmwareVersion[6];
+ unsigned char FullModelName[18];
+ unsigned char Bus;
+ unsigned char Device;
+ unsigned char IRQ_Channel;
+ unsigned char DMA_Channel;
+ unsigned char SCSI_ID;
+ boolean IRQ_ChannelAcquired:1;
+ boolean DMA_ChannelAcquired:1;
+ boolean ExtendedTranslationEnabled:1;
+ boolean ParityCheckingEnabled:1;
+ boolean BusResetEnabled:1;
+ boolean LevelSensitiveInterrupt:1;
+ boolean HostWideSCSI:1;
+ boolean HostDifferentialSCSI:1;
+ boolean HostSupportsSCAM:1;
+ boolean HostUltraSCSI:1;
+ boolean ExtendedLUNSupport:1;
+ boolean TerminationInfoValid:1;
+ boolean LowByteTerminated:1;
+ boolean HighByteTerminated:1;
+ boolean BounceBuffersRequired:1;
+ boolean StrictRoundRobinModeSupport:1;
+ boolean SCAM_Enabled:1;
+ boolean SCAM_Level2:1;
+ boolean HostAdapterInitialized:1;
+ boolean HostAdapterExternalReset:1;
+ boolean HostAdapterInternalError:1;
+ boolean ProcessCompletedCCBsActive;
+ volatile boolean HostAdapterCommandCompleted;
+ unsigned short HostAdapterScatterGatherLimit;
+ unsigned short DriverScatterGatherLimit;
+ unsigned short MaxTargetDevices;
+ unsigned short MaxLogicalUnits;
+ unsigned short MailboxCount;
+ unsigned short InitialCCBs;
+ unsigned short IncrementalCCBs;
+ unsigned short AllocatedCCBs;
+ unsigned short DriverQueueDepth;
+ unsigned short HostAdapterQueueDepth;
+ unsigned short UntaggedQueueDepth;
+ unsigned short CommonQueueDepth;
+ unsigned short BusSettleTime;
+ unsigned short SynchronousPermitted;
+ unsigned short FastPermitted;
+ unsigned short UltraPermitted;
+ unsigned short WidePermitted;
+ unsigned short DisconnectPermitted;
+ unsigned short TaggedQueuingPermitted;
+ unsigned short ExternalHostAdapterResets;
+ unsigned short HostAdapterInternalErrors;
+ unsigned short TargetDeviceCount;
+ unsigned short MessageBufferLength;
+ u32 BIOS_Address;
+ struct BusLogic_DriverOptions *DriverOptions;
+ struct FlashPoint_Info FlashPointInfo;
+ FlashPoint_CardHandle_T CardHandle;
+ struct list_head host_list;
+ struct BusLogic_CCB *All_CCBs;
+ struct BusLogic_CCB *Free_CCBs;
+ struct BusLogic_CCB *FirstCompletedCCB;
+ struct BusLogic_CCB *LastCompletedCCB;
+ struct BusLogic_CCB *BusDeviceResetPendingCCB[BusLogic_MaxTargetDevices];
+ struct BusLogic_TargetFlags TargetFlags[BusLogic_MaxTargetDevices];
+ unsigned char QueueDepth[BusLogic_MaxTargetDevices];
+ unsigned char SynchronousPeriod[BusLogic_MaxTargetDevices];
+ unsigned char SynchronousOffset[BusLogic_MaxTargetDevices];
+ unsigned char ActiveCommands[BusLogic_MaxTargetDevices];
+ unsigned int CommandsSinceReset[BusLogic_MaxTargetDevices];
+ unsigned long LastSequencePoint[BusLogic_MaxTargetDevices];
+ unsigned long LastResetAttempted[BusLogic_MaxTargetDevices];
+ unsigned long LastResetCompleted[BusLogic_MaxTargetDevices];
+ struct BusLogic_OutgoingMailbox *FirstOutgoingMailbox;
+ struct BusLogic_OutgoingMailbox *LastOutgoingMailbox;
+ struct BusLogic_OutgoingMailbox *NextOutgoingMailbox;
+ struct BusLogic_IncomingMailbox *FirstIncomingMailbox;
+ struct BusLogic_IncomingMailbox *LastIncomingMailbox;
+ struct BusLogic_IncomingMailbox *NextIncomingMailbox;
+ struct BusLogic_TargetStatistics TargetStatistics[BusLogic_MaxTargetDevices];
+ unsigned char *MailboxSpace;
+ dma_addr_t MailboxSpaceHandle;
+ unsigned int MailboxSize;
+ unsigned long CCB_Offset;
+ char MessageBuffer[BusLogic_MessageBufferSize];
+};
+
+/*
+ Define a structure for the BIOS Disk Parameters.
+*/
+
+struct BIOS_DiskParameters {
+ int Heads;
+ int Sectors;
+ int Cylinders;
+};
+
+/*
+ Define a structure for the SCSI Inquiry command results.
+*/
+
+struct SCSI_Inquiry {
+ unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
+ unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
+ unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */
+ boolean RMB:1; /* Byte 1 Bit 7 */
+ unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */
+ unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */
+ unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */
+ unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */
+ unsigned char:2; /* Byte 3 Bits 4-5 */
+ boolean TrmIOP:1; /* Byte 3 Bit 6 */
+ boolean AENC:1; /* Byte 3 Bit 7 */
+ unsigned char AdditionalLength; /* Byte 4 */
+ unsigned char:8; /* Byte 5 */
+ unsigned char:8; /* Byte 6 */
+ boolean SftRe:1; /* Byte 7 Bit 0 */
+ boolean CmdQue:1; /* Byte 7 Bit 1 */
+ boolean:1; /* Byte 7 Bit 2 */
+ boolean Linked:1; /* Byte 7 Bit 3 */
+ boolean Sync:1; /* Byte 7 Bit 4 */
+ boolean WBus16:1; /* Byte 7 Bit 5 */
+ boolean WBus32:1; /* Byte 7 Bit 6 */
+ boolean RelAdr:1; /* Byte 7 Bit 7 */
+ unsigned char VendorIdentification[8]; /* Bytes 8-15 */
+ unsigned char ProductIdentification[16]; /* Bytes 16-31 */
+ unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */
+};
+
+
+/*
+ Define functions to provide an abstraction for reading and writing the
+ Host Adapter I/O Registers.
+*/
+
+static inline void BusLogic_SCSIBusReset(struct BusLogic_HostAdapter *HostAdapter)
+{
+ union BusLogic_ControlRegister ControlRegister;
+ ControlRegister.All = 0;
+ ControlRegister.cr.SCSIBusReset = true;
+ outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
+}
+
+static inline void BusLogic_InterruptReset(struct BusLogic_HostAdapter *HostAdapter)
+{
+ union BusLogic_ControlRegister ControlRegister;
+ ControlRegister.All = 0;
+ ControlRegister.cr.InterruptReset = true;
+ outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
+}
+
+static inline void BusLogic_SoftReset(struct BusLogic_HostAdapter *HostAdapter)
+{
+ union BusLogic_ControlRegister ControlRegister;
+ ControlRegister.All = 0;
+ ControlRegister.cr.SoftReset = true;
+ outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
+}
+
+static inline void BusLogic_HardReset(struct BusLogic_HostAdapter *HostAdapter)
+{
+ union BusLogic_ControlRegister ControlRegister;
+ ControlRegister.All = 0;
+ ControlRegister.cr.HardReset = true;
+ outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
+}
+
+static inline unsigned char BusLogic_ReadStatusRegister(struct BusLogic_HostAdapter *HostAdapter)
+{
+ return inb(HostAdapter->IO_Address + BusLogic_StatusRegisterOffset);
+}
+
+static inline void BusLogic_WriteCommandParameterRegister(struct BusLogic_HostAdapter
+ *HostAdapter, unsigned char Value)
+{
+ outb(Value, HostAdapter->IO_Address + BusLogic_CommandParameterRegisterOffset);
+}
+
+static inline unsigned char BusLogic_ReadDataInRegister(struct BusLogic_HostAdapter *HostAdapter)
+{
+ return inb(HostAdapter->IO_Address + BusLogic_DataInRegisterOffset);
+}
+
+static inline unsigned char BusLogic_ReadInterruptRegister(struct BusLogic_HostAdapter *HostAdapter)
+{
+ return inb(HostAdapter->IO_Address + BusLogic_InterruptRegisterOffset);
+}
+
+static inline unsigned char BusLogic_ReadGeometryRegister(struct BusLogic_HostAdapter *HostAdapter)
+{
+ return inb(HostAdapter->IO_Address + BusLogic_GeometryRegisterOffset);
+}
+
+/*
+ BusLogic_StartMailboxCommand issues an Execute Mailbox Command, which
+ notifies the Host Adapter that an entry has been made in an Outgoing
+ Mailbox.
+*/
+
+static inline void BusLogic_StartMailboxCommand(struct BusLogic_HostAdapter *HostAdapter)
+{
+ BusLogic_WriteCommandParameterRegister(HostAdapter, BusLogic_ExecuteMailboxCommand);
+}
+
+/*
+ BusLogic_Delay waits for Seconds to elapse.
+*/
+
+static inline void BusLogic_Delay(int Seconds)
+{
+ mdelay(1000 * Seconds);
+}
+
+/*
+ Virtual_to_Bus and Bus_to_Virtual map between Kernel Virtual Addresses
+ and PCI/VLB/EISA/ISA Bus Addresses.
+*/
+
+static inline u32 Virtual_to_Bus(void *VirtualAddress)
+{
+ return (u32) virt_to_bus(VirtualAddress);
+}
+
+static inline void *Bus_to_Virtual(u32 BusAddress)
+{
+ return (void *) bus_to_virt(BusAddress);
+}
+
+/*
+ Virtual_to_32Bit_Virtual maps between Kernel Virtual Addresses and
+ 32 bit Kernel Virtual Addresses. This avoids compilation warnings
+ on 64 bit architectures.
+*/
+
+static inline u32 Virtual_to_32Bit_Virtual(void *VirtualAddress)
+{
+ return (u32) (unsigned long) VirtualAddress;
+}
+
+/*
+ BusLogic_IncrementErrorCounter increments Error Counter by 1, stopping at
+ 65535 rather than wrapping around to 0.
+*/
+
+static inline void BusLogic_IncrementErrorCounter(unsigned short *ErrorCounter)
+{
+ if (*ErrorCounter < 65535)
+ (*ErrorCounter)++;
+}
+
+/*
+ BusLogic_IncrementByteCounter increments Byte Counter by Amount.
+*/
+
+static inline void BusLogic_IncrementByteCounter(struct BusLogic_ByteCounter
+ *ByteCounter, unsigned int Amount)
+{
+ ByteCounter->Units += Amount;
+ if (ByteCounter->Units > 999999999) {
+ ByteCounter->Units -= 1000000000;
+ ByteCounter->Billions++;
+ }
+}
+
+/*
+ BusLogic_IncrementSizeBucket increments the Bucket for Amount.
+*/
+
+static inline void BusLogic_IncrementSizeBucket(BusLogic_CommandSizeBuckets_T CommandSizeBuckets, unsigned int Amount)
+{
+ int Index = 0;
+ if (Amount < 8 * 1024) {
+ if (Amount < 2 * 1024)
+ Index = (Amount < 1 * 1024 ? 0 : 1);
+ else
+ Index = (Amount < 4 * 1024 ? 2 : 3);
+ } else if (Amount < 128 * 1024) {
+ if (Amount < 32 * 1024)
+ Index = (Amount < 16 * 1024 ? 4 : 5);
+ else
+ Index = (Amount < 64 * 1024 ? 6 : 7);
+ } else
+ Index = (Amount < 256 * 1024 ? 8 : 9);
+ CommandSizeBuckets[Index]++;
+}
+
+/*
+ Define the version number of the FlashPoint Firmware (SCCB Manager).
+*/
+
+#define FlashPoint_FirmwareVersion "5.02"
+
+/*
+ Define the possible return values from FlashPoint_HandleInterrupt.
+*/
+
+#define FlashPoint_NormalInterrupt 0x00
+#define FlashPoint_InternalError 0xFE
+#define FlashPoint_ExternalBusReset 0xFF
+
+/*
+ Define prototypes for the forward referenced BusLogic Driver
+ Internal Functions.
+*/
+
+static const char *BusLogic_DriverInfo(struct Scsi_Host *);
+static int BusLogic_QueueCommand(struct scsi_cmnd *, void (*CompletionRoutine) (struct scsi_cmnd *));
+static int BusLogic_BIOSDiskParameters(struct scsi_device *, struct block_device *, sector_t, int *);
+static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *, char *, char **, off_t, int, int);
+static int BusLogic_SlaveConfigure(struct scsi_device *);
+static void BusLogic_QueueCompletedCCB(struct BusLogic_CCB *);
+static irqreturn_t BusLogic_InterruptHandler(int, void *, struct pt_regs *);
+static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *, boolean HardReset);
+static void BusLogic_Message(enum BusLogic_MessageLevel, char *, struct BusLogic_HostAdapter *, ...);
+static int __init BusLogic_Setup(char *);
+
+#endif /* _BUSLOGIC_H */
