Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
new file mode 100644
index 0000000..c2ecf11
--- /dev/null
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -0,0 +1,135 @@
+/*
+ * drivers/pcmcia/sa1100_simpad.c
+ *
+ * PCMCIA implementation routines for simpad
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/arch/simpad.h>
+#include "sa1100_generic.h"
+
+extern long get_cs3_shadow(void);
+extern void set_cs3_bit(int value);
+extern void clear_cs3_bit(int value);
+
+static struct pcmcia_irqs irqs[] = {
+ { 1, IRQ_GPIO_CF_CD, "CF_CD" },
+};
+
+static int simpad_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+
+ clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
+
+ skt->irq = IRQ_GPIO_CF_IRQ;
+
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void simpad_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+ /* Disable CF bus: */
+ //set_cs3_bit(PCMCIA_BUFF_DIS);
+ clear_cs3_bit(PCMCIA_RESET);
+}
+
+static void
+simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ unsigned long levels = GPLR;
+ long cs3reg = get_cs3_shadow();
+
+ state->detect=((levels & GPIO_CF_CD)==0)?1:0;
+ state->ready=(levels & GPIO_CF_IRQ)?1:0;
+ state->bvd1=1; /* Not available on Simpad. */
+ state->bvd2=1; /* Not available on Simpad. */
+ state->wrprot=0; /* Not available on Simpad. */
+
+ if((cs3reg & 0x0c) == 0x0c) {
+ state->vs_3v=0;
+ state->vs_Xv=0;
+ } else {
+ state->vs_3v=1;
+ state->vs_Xv=0;
+ }
+}
+
+static int
+simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* Murphy: see table of MIC2562a-1 */
+ switch (state->Vcc) {
+ case 0:
+ clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
+ break;
+
+ case 33:
+ clear_cs3_bit(VCC_3V_EN|EN1);
+ set_cs3_bit(VCC_5V_EN|EN0);
+ break;
+
+ case 50:
+ clear_cs3_bit(VCC_5V_EN|EN1);
+ set_cs3_bit(VCC_3V_EN|EN0);
+ break;
+
+ default:
+ printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
+ __FUNCTION__, state->Vcc);
+ clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
+ local_irq_restore(flags);
+ return -1;
+ }
+
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void simpad_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void simpad_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ set_cs3_bit(PCMCIA_RESET);
+}
+
+static struct pcmcia_low_level simpad_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .hw_init = simpad_pcmcia_hw_init,
+ .hw_shutdown = simpad_pcmcia_hw_shutdown,
+ .socket_state = simpad_pcmcia_socket_state,
+ .configure_socket = simpad_pcmcia_configure_socket,
+ .socket_init = simpad_pcmcia_socket_init,
+ .socket_suspend = simpad_pcmcia_socket_suspend,
+};
+
+int __init pcmcia_simpad_init(struct device *dev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_simpad())
+ ret = sa11xx_drv_pcmcia_probe(dev, &simpad_pcmcia_ops, 1, 1);
+
+ return ret;
+}
