Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
new file mode 100644
index 0000000..35fad81
--- /dev/null
+++ b/drivers/net/irda/vlsi_ir.c
@@ -0,0 +1,1912 @@
+/*********************************************************************
+ *
+ * vlsi_ir.c: VLSI82C147 PCI IrDA controller driver for Linux
+ *
+ * Copyright (c) 2001-2003 Martin Diehl
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#define DRIVER_NAME "vlsi_ir"
+#define DRIVER_VERSION "v0.5"
+#define DRIVER_DESCRIPTION "IrDA SIR/MIR/FIR driver for VLSI 82C147"
+#define DRIVER_AUTHOR "Martin Diehl <info@mdiehl.de>"
+
+MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+/********************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
+#include <asm/uaccess.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+
+#include "vlsi_ir.h"
+
+/********************************************************/
+
+static /* const */ char drivername[] = DRIVER_NAME;
+
+static struct pci_device_id vlsi_irda_table [] = {
+ {
+ .class = PCI_CLASS_WIRELESS_IRDA << 8,
+ .class_mask = PCI_CLASS_SUBCLASS_MASK << 8,
+ .vendor = PCI_VENDOR_ID_VLSI,
+ .device = PCI_DEVICE_ID_VLSI_82C147,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ { /* all zeroes */ }
+};
+
+MODULE_DEVICE_TABLE(pci, vlsi_irda_table);
+
+/********************************************************/
+
+/* clksrc: which clock source to be used
+ * 0: auto - try PLL, fallback to 40MHz XCLK
+ * 1: on-chip 48MHz PLL
+ * 2: external 48MHz XCLK
+ * 3: external 40MHz XCLK (HP OB-800)
+ */
+
+static int clksrc = 0; /* default is 0(auto) */
+module_param(clksrc, int, 0);
+MODULE_PARM_DESC(clksrc, "clock input source selection");
+
+/* ringsize: size of the tx and rx descriptor rings
+ * independent for tx and rx
+ * specify as ringsize=tx[,rx]
+ * allowed values: 4, 8, 16, 32, 64
+ * Due to the IrDA 1.x max. allowed window size=7,
+ * there should be no gain when using rings larger than 8
+ */
+
+static int ringsize[] = {8,8}; /* default is tx=8 / rx=8 */
+module_param_array(ringsize, int, NULL, 0);
+MODULE_PARM_DESC(ringsize, "TX, RX ring descriptor size");
+
+/* sirpulse: tuning of the SIR pulse width within IrPHY 1.3 limits
+ * 0: very short, 1.5us (exception: 6us at 2.4 kbaud)
+ * 1: nominal 3/16 bittime width
+ * note: IrDA compliant peer devices should be happy regardless
+ * which one is used. Primary goal is to save some power
+ * on the sender's side - at 9.6kbaud for example the short
+ * pulse width saves more than 90% of the transmitted IR power.
+ */
+
+static int sirpulse = 1; /* default is 3/16 bittime */
+module_param(sirpulse, int, 0);
+MODULE_PARM_DESC(sirpulse, "SIR pulse width tuning");
+
+/* qos_mtt_bits: encoded min-turn-time value we require the peer device
+ * to use before transmitting to us. "Type 1" (per-station)
+ * bitfield according to IrLAP definition (section 6.6.8)
+ * Don't know which transceiver is used by my OB800 - the
+ * pretty common HP HDLS-1100 requires 1 msec - so lets use this.
+ */
+
+static int qos_mtt_bits = 0x07; /* default is 1 ms or more */
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "IrLAP bitfield representing min-turn-time");
+
+/********************************************************/
+
+static void vlsi_reg_debug(unsigned iobase, const char *s)
+{
+ int i;
+
+ printk(KERN_DEBUG "%s: ", s);
+ for (i = 0; i < 0x20; i++)
+ printk("%02x", (unsigned)inb((iobase+i)));
+ printk("\n");
+}
+
+static void vlsi_ring_debug(struct vlsi_ring *r)
+{
+ struct ring_descr *rd;
+ unsigned i;
+
+ printk(KERN_DEBUG "%s - ring %p / size %u / mask 0x%04x / len %u / dir %d / hw %p\n",
+ __FUNCTION__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw);
+ printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __FUNCTION__,
+ atomic_read(&r->head) & r->mask, atomic_read(&r->tail) & r->mask);
+ for (i = 0; i < r->size; i++) {
+ rd = &r->rd[i];
+ printk(KERN_DEBUG "%s - ring descr %u: ", __FUNCTION__, i);
+ printk("skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw);
+ printk(KERN_DEBUG "%s - hw: status=%02x count=%u addr=0x%08x\n",
+ __FUNCTION__, (unsigned) rd_get_status(rd),
+ (unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd));
+ }
+}
+
+/********************************************************/
+
+/* needed regardless of CONFIG_PROC_FS */
+static struct proc_dir_entry *vlsi_proc_root = NULL;
+
+#ifdef CONFIG_PROC_FS
+
+static void vlsi_proc_pdev(struct seq_file *seq, struct pci_dev *pdev)
+{
+ unsigned iobase = pci_resource_start(pdev, 0);
+ unsigned i;
+
+ seq_printf(seq, "\n%s (vid/did: %04x/%04x)\n",
+ PCIDEV_NAME(pdev), (int)pdev->vendor, (int)pdev->device);
+ seq_printf(seq, "pci-power-state: %u\n", (unsigned) pdev->current_state);
+ seq_printf(seq, "resources: irq=%u / io=0x%04x / dma_mask=0x%016Lx\n",
+ pdev->irq, (unsigned)pci_resource_start(pdev, 0), (unsigned long long)pdev->dma_mask);
+ seq_printf(seq, "hw registers: ");
+ for (i = 0; i < 0x20; i++)
+ seq_printf(seq, "%02x", (unsigned)inb((iobase+i)));
+ seq_printf(seq, "\n");
+}
+
+static void vlsi_proc_ndev(struct seq_file *seq, struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ u8 byte;
+ u16 word;
+ unsigned delta1, delta2;
+ struct timeval now;
+ unsigned iobase = ndev->base_addr;
+
+ seq_printf(seq, "\n%s link state: %s / %s / %s / %s\n", ndev->name,
+ netif_device_present(ndev) ? "attached" : "detached",
+ netif_running(ndev) ? "running" : "not running",
+ netif_carrier_ok(ndev) ? "carrier ok" : "no carrier",
+ netif_queue_stopped(ndev) ? "queue stopped" : "queue running");
+
+ if (!netif_running(ndev))
+ return;
+
+ seq_printf(seq, "\nhw-state:\n");
+ pci_read_config_byte(idev->pdev, VLSI_PCI_IRMISC, &byte);
+ seq_printf(seq, "IRMISC:%s%s%s uart%s",
+ (byte&IRMISC_IRRAIL) ? " irrail" : "",
+ (byte&IRMISC_IRPD) ? " irpd" : "",
+ (byte&IRMISC_UARTTST) ? " uarttest" : "",
+ (byte&IRMISC_UARTEN) ? "@" : " disabled\n");
+ if (byte&IRMISC_UARTEN) {
+ seq_printf(seq, "0x%s\n",
+ (byte&2) ? ((byte&1) ? "3e8" : "2e8")
+ : ((byte&1) ? "3f8" : "2f8"));
+ }
+ pci_read_config_byte(idev->pdev, VLSI_PCI_CLKCTL, &byte);
+ seq_printf(seq, "CLKCTL: PLL %s%s%s / clock %s / wakeup %s\n",
+ (byte&CLKCTL_PD_INV) ? "powered" : "down",
+ (byte&CLKCTL_LOCK) ? " locked" : "",
+ (byte&CLKCTL_EXTCLK) ? ((byte&CLKCTL_XCKSEL)?" / 40 MHz XCLK":" / 48 MHz XCLK") : "",
+ (byte&CLKCTL_CLKSTP) ? "stopped" : "running",
+ (byte&CLKCTL_WAKE) ? "enabled" : "disabled");
+ pci_read_config_byte(idev->pdev, VLSI_PCI_MSTRPAGE, &byte);
+ seq_printf(seq, "MSTRPAGE: 0x%02x\n", (unsigned)byte);
+
+ byte = inb(iobase+VLSI_PIO_IRINTR);
+ seq_printf(seq, "IRINTR:%s%s%s%s%s%s%s%s\n",
+ (byte&IRINTR_ACTEN) ? " ACTEN" : "",
+ (byte&IRINTR_RPKTEN) ? " RPKTEN" : "",
+ (byte&IRINTR_TPKTEN) ? " TPKTEN" : "",
+ (byte&IRINTR_OE_EN) ? " OE_EN" : "",
+ (byte&IRINTR_ACTIVITY) ? " ACTIVITY" : "",
+ (byte&IRINTR_RPKTINT) ? " RPKTINT" : "",
+ (byte&IRINTR_TPKTINT) ? " TPKTINT" : "",
+ (byte&IRINTR_OE_INT) ? " OE_INT" : "");
+ word = inw(iobase+VLSI_PIO_RINGPTR);
+ seq_printf(seq, "RINGPTR: rx=%u / tx=%u\n", RINGPTR_GET_RX(word), RINGPTR_GET_TX(word));
+ word = inw(iobase+VLSI_PIO_RINGBASE);
+ seq_printf(seq, "RINGBASE: busmap=0x%08x\n",
+ ((unsigned)word << 10)|(MSTRPAGE_VALUE<<24));
+ word = inw(iobase+VLSI_PIO_RINGSIZE);
+ seq_printf(seq, "RINGSIZE: rx=%u / tx=%u\n", RINGSIZE_TO_RXSIZE(word),
+ RINGSIZE_TO_TXSIZE(word));
+
+ word = inw(iobase+VLSI_PIO_IRCFG);
+ seq_printf(seq, "IRCFG:%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+ (word&IRCFG_LOOP) ? " LOOP" : "",
+ (word&IRCFG_ENTX) ? " ENTX" : "",
+ (word&IRCFG_ENRX) ? " ENRX" : "",
+ (word&IRCFG_MSTR) ? " MSTR" : "",
+ (word&IRCFG_RXANY) ? " RXANY" : "",
+ (word&IRCFG_CRC16) ? " CRC16" : "",
+ (word&IRCFG_FIR) ? " FIR" : "",
+ (word&IRCFG_MIR) ? " MIR" : "",
+ (word&IRCFG_SIR) ? " SIR" : "",
+ (word&IRCFG_SIRFILT) ? " SIRFILT" : "",
+ (word&IRCFG_SIRTEST) ? " SIRTEST" : "",
+ (word&IRCFG_TXPOL) ? " TXPOL" : "",
+ (word&IRCFG_RXPOL) ? " RXPOL" : "");
+ word = inw(iobase+VLSI_PIO_IRENABLE);
+ seq_printf(seq, "IRENABLE:%s%s%s%s%s%s%s%s\n",
+ (word&IRENABLE_PHYANDCLOCK) ? " PHYANDCLOCK" : "",
+ (word&IRENABLE_CFGER) ? " CFGERR" : "",
+ (word&IRENABLE_FIR_ON) ? " FIR_ON" : "",
+ (word&IRENABLE_MIR_ON) ? " MIR_ON" : "",
+ (word&IRENABLE_SIR_ON) ? " SIR_ON" : "",
+ (word&IRENABLE_ENTXST) ? " ENTXST" : "",
+ (word&IRENABLE_ENRXST) ? " ENRXST" : "",
+ (word&IRENABLE_CRC16_ON) ? " CRC16_ON" : "");
+ word = inw(iobase+VLSI_PIO_PHYCTL);
+ seq_printf(seq, "PHYCTL: baud-divisor=%u / pulsewidth=%u / preamble=%u\n",
+ (unsigned)PHYCTL_TO_BAUD(word),
+ (unsigned)PHYCTL_TO_PLSWID(word),
+ (unsigned)PHYCTL_TO_PREAMB(word));
+ word = inw(iobase+VLSI_PIO_NPHYCTL);
+ seq_printf(seq, "NPHYCTL: baud-divisor=%u / pulsewidth=%u / preamble=%u\n",
+ (unsigned)PHYCTL_TO_BAUD(word),
+ (unsigned)PHYCTL_TO_PLSWID(word),
+ (unsigned)PHYCTL_TO_PREAMB(word));
+ word = inw(iobase+VLSI_PIO_MAXPKT);
+ seq_printf(seq, "MAXPKT: max. rx packet size = %u\n", word);
+ word = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ seq_printf(seq, "RCVBCNT: rx-fifo filling level = %u\n", word);
+
+ seq_printf(seq, "\nsw-state:\n");
+ seq_printf(seq, "IrPHY setup: %d baud - %s encoding\n", idev->baud,
+ (idev->mode==IFF_SIR)?"SIR":((idev->mode==IFF_MIR)?"MIR":"FIR"));
+ do_gettimeofday(&now);
+ if (now.tv_usec >= idev->last_rx.tv_usec) {
+ delta2 = now.tv_usec - idev->last_rx.tv_usec;
+ delta1 = 0;
+ }
+ else {
+ delta2 = 1000000 + now.tv_usec - idev->last_rx.tv_usec;
+ delta1 = 1;
+ }
+ seq_printf(seq, "last rx: %lu.%06u sec\n",
+ now.tv_sec - idev->last_rx.tv_sec - delta1, delta2);
+
+ seq_printf(seq, "RX: packets=%lu / bytes=%lu / errors=%lu / dropped=%lu",
+ idev->stats.rx_packets, idev->stats.rx_bytes, idev->stats.rx_errors,
+ idev->stats.rx_dropped);
+ seq_printf(seq, " / overrun=%lu / length=%lu / frame=%lu / crc=%lu\n",
+ idev->stats.rx_over_errors, idev->stats.rx_length_errors,
+ idev->stats.rx_frame_errors, idev->stats.rx_crc_errors);
+ seq_printf(seq, "TX: packets=%lu / bytes=%lu / errors=%lu / dropped=%lu / fifo=%lu\n",
+ idev->stats.tx_packets, idev->stats.tx_bytes, idev->stats.tx_errors,
+ idev->stats.tx_dropped, idev->stats.tx_fifo_errors);
+
+}
+
+static void vlsi_proc_ring(struct seq_file *seq, struct vlsi_ring *r)
+{
+ struct ring_descr *rd;
+ unsigned i, j;
+ int h, t;
+
+ seq_printf(seq, "size %u / mask 0x%04x / len %u / dir %d / hw %p\n",
+ r->size, r->mask, r->len, r->dir, r->rd[0].hw);
+ h = atomic_read(&r->head) & r->mask;
+ t = atomic_read(&r->tail) & r->mask;
+ seq_printf(seq, "head = %d / tail = %d ", h, t);
+ if (h == t)
+ seq_printf(seq, "(empty)\n");
+ else {
+ if (((t+1)&r->mask) == h)
+ seq_printf(seq, "(full)\n");
+ else
+ seq_printf(seq, "(level = %d)\n", ((unsigned)(t-h) & r->mask));
+ rd = &r->rd[h];
+ j = (unsigned) rd_get_count(rd);
+ seq_printf(seq, "current: rd = %d / status = %02x / len = %u\n",
+ h, (unsigned)rd_get_status(rd), j);
+ if (j > 0) {
+ seq_printf(seq, " data:");
+ if (j > 20)
+ j = 20;
+ for (i = 0; i < j; i++)
+ seq_printf(seq, " %02x", (unsigned)((unsigned char *)rd->buf)[i]);
+ seq_printf(seq, "\n");
+ }
+ }
+ for (i = 0; i < r->size; i++) {
+ rd = &r->rd[i];
+ seq_printf(seq, "> ring descr %u: ", i);
+ seq_printf(seq, "skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw);
+ seq_printf(seq, " hw: status=%02x count=%u busaddr=0x%08x\n",
+ (unsigned) rd_get_status(rd),
+ (unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd));
+ }
+}
+
+static int vlsi_seq_show(struct seq_file *seq, void *v)
+{
+ struct net_device *ndev = seq->private;
+ vlsi_irda_dev_t *idev = ndev->priv;
+ unsigned long flags;
+
+ seq_printf(seq, "\n%s %s\n\n", DRIVER_NAME, DRIVER_VERSION);
+ seq_printf(seq, "clksrc: %s\n",
+ (clksrc>=2) ? ((clksrc==3)?"40MHz XCLK":"48MHz XCLK")
+ : ((clksrc==1)?"48MHz PLL":"autodetect"));
+ seq_printf(seq, "ringsize: tx=%d / rx=%d\n",
+ ringsize[0], ringsize[1]);
+ seq_printf(seq, "sirpulse: %s\n", (sirpulse)?"3/16 bittime":"short");
+ seq_printf(seq, "qos_mtt_bits: 0x%02x\n", (unsigned)qos_mtt_bits);
+
+ spin_lock_irqsave(&idev->lock, flags);
+ if (idev->pdev != NULL) {
+ vlsi_proc_pdev(seq, idev->pdev);
+
+ if (idev->pdev->current_state == 0)
+ vlsi_proc_ndev(seq, ndev);
+ else
+ seq_printf(seq, "\nPCI controller down - resume_ok = %d\n",
+ idev->resume_ok);
+ if (netif_running(ndev) && idev->rx_ring && idev->tx_ring) {
+ seq_printf(seq, "\n--------- RX ring -----------\n\n");
+ vlsi_proc_ring(seq, idev->rx_ring);
+ seq_printf(seq, "\n--------- TX ring -----------\n\n");
+ vlsi_proc_ring(seq, idev->tx_ring);
+ }
+ }
+ seq_printf(seq, "\n");
+ spin_unlock_irqrestore(&idev->lock, flags);
+
+ return 0;
+}
+
+static int vlsi_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, vlsi_seq_show, PDE(inode)->data);
+}
+
+static struct file_operations vlsi_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = vlsi_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+#define VLSI_PROC_FOPS (&vlsi_proc_fops)
+
+#else /* CONFIG_PROC_FS */
+#define VLSI_PROC_FOPS NULL
+#endif
+
+/********************************************************/
+
+static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr_hw *hwmap,
+ unsigned size, unsigned len, int dir)
+{
+ struct vlsi_ring *r;
+ struct ring_descr *rd;
+ unsigned i, j;
+ dma_addr_t busaddr;
+
+ if (!size || ((size-1)&size)!=0) /* must be >0 and power of 2 */
+ return NULL;
+
+ r = kmalloc(sizeof(*r) + size * sizeof(struct ring_descr), GFP_KERNEL);
+ if (!r)
+ return NULL;
+ memset(r, 0, sizeof(*r));
+
+ r->pdev = pdev;
+ r->dir = dir;
+ r->len = len;
+ r->rd = (struct ring_descr *)(r+1);
+ r->mask = size - 1;
+ r->size = size;
+ atomic_set(&r->head, 0);
+ atomic_set(&r->tail, 0);
+
+ for (i = 0; i < size; i++) {
+ rd = r->rd + i;
+ memset(rd, 0, sizeof(*rd));
+ rd->hw = hwmap + i;
+ rd->buf = kmalloc(len, GFP_KERNEL|GFP_DMA);
+ if (rd->buf == NULL
+ || !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
+ if (rd->buf) {
+ IRDA_ERROR("%s: failed to create PCI-MAP for %p",
+ __FUNCTION__, rd->buf);
+ kfree(rd->buf);
+ rd->buf = NULL;
+ }
+ for (j = 0; j < i; j++) {
+ rd = r->rd + j;
+ busaddr = rd_get_addr(rd);
+ rd_set_addr_status(rd, 0, 0);
+ if (busaddr)
+ pci_unmap_single(pdev, busaddr, len, dir);
+ kfree(rd->buf);
+ rd->buf = NULL;
+ }
+ kfree(r);
+ return NULL;
+ }
+ rd_set_addr_status(rd, busaddr, 0);
+ /* initially, the dma buffer is owned by the CPU */
+ rd->skb = NULL;
+ }
+ return r;
+}
+
+static int vlsi_free_ring(struct vlsi_ring *r)
+{
+ struct ring_descr *rd;
+ unsigned i;
+ dma_addr_t busaddr;
+
+ for (i = 0; i < r->size; i++) {
+ rd = r->rd + i;
+ if (rd->skb)
+ dev_kfree_skb_any(rd->skb);
+ busaddr = rd_get_addr(rd);
+ rd_set_addr_status(rd, 0, 0);
+ if (busaddr)
+ pci_unmap_single(r->pdev, busaddr, r->len, r->dir);
+ if (rd->buf)
+ kfree(rd->buf);
+ }
+ kfree(r);
+ return 0;
+}
+
+static int vlsi_create_hwif(vlsi_irda_dev_t *idev)
+{
+ char *ringarea;
+ struct ring_descr_hw *hwmap;
+
+ idev->virtaddr = NULL;
+ idev->busaddr = 0;
+
+ ringarea = pci_alloc_consistent(idev->pdev, HW_RING_AREA_SIZE, &idev->busaddr);
+ if (!ringarea) {
+ IRDA_ERROR("%s: insufficient memory for descriptor rings\n",
+ __FUNCTION__);
+ goto out;
+ }
+ memset(ringarea, 0, HW_RING_AREA_SIZE);
+
+ hwmap = (struct ring_descr_hw *)ringarea;
+ idev->rx_ring = vlsi_alloc_ring(idev->pdev, hwmap, ringsize[1],
+ XFER_BUF_SIZE, PCI_DMA_FROMDEVICE);
+ if (idev->rx_ring == NULL)
+ goto out_unmap;
+
+ hwmap += MAX_RING_DESCR;
+ idev->tx_ring = vlsi_alloc_ring(idev->pdev, hwmap, ringsize[0],
+ XFER_BUF_SIZE, PCI_DMA_TODEVICE);
+ if (idev->tx_ring == NULL)
+ goto out_free_rx;
+
+ idev->virtaddr = ringarea;
+ return 0;
+
+out_free_rx:
+ vlsi_free_ring(idev->rx_ring);
+out_unmap:
+ idev->rx_ring = idev->tx_ring = NULL;
+ pci_free_consistent(idev->pdev, HW_RING_AREA_SIZE, ringarea, idev->busaddr);
+ idev->busaddr = 0;
+out:
+ return -ENOMEM;
+}
+
+static int vlsi_destroy_hwif(vlsi_irda_dev_t *idev)
+{
+ vlsi_free_ring(idev->rx_ring);
+ vlsi_free_ring(idev->tx_ring);
+ idev->rx_ring = idev->tx_ring = NULL;
+
+ if (idev->busaddr)
+ pci_free_consistent(idev->pdev,HW_RING_AREA_SIZE,idev->virtaddr,idev->busaddr);
+
+ idev->virtaddr = NULL;
+ idev->busaddr = 0;
+
+ return 0;
+}
+
+/********************************************************/
+
+static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd)
+{
+ u16 status;
+ int crclen, len = 0;
+ struct sk_buff *skb;
+ int ret = 0;
+ struct net_device *ndev = (struct net_device *)pci_get_drvdata(r->pdev);
+ vlsi_irda_dev_t *idev = ndev->priv;
+
+ pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ /* dma buffer now owned by the CPU */
+ status = rd_get_status(rd);
+ if (status & RD_RX_ERROR) {
+ if (status & RD_RX_OVER)
+ ret |= VLSI_RX_OVER;
+ if (status & RD_RX_LENGTH)
+ ret |= VLSI_RX_LENGTH;
+ if (status & RD_RX_PHYERR)
+ ret |= VLSI_RX_FRAME;
+ if (status & RD_RX_CRCERR)
+ ret |= VLSI_RX_CRC;
+ goto done;
+ }
+
+ len = rd_get_count(rd);
+ crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16);
+ len -= crclen; /* remove trailing CRC */
+ if (len <= 0) {
+ IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __FUNCTION__, len);
+ ret |= VLSI_RX_DROP;
+ goto done;
+ }
+
+ if (idev->mode == IFF_SIR) { /* hw checks CRC in MIR, FIR mode */
+
+ /* rd->buf is a streaming PCI_DMA_FROMDEVICE map. Doing the
+ * endian-adjustment there just in place will dirty a cache line
+ * which belongs to the map and thus we must be sure it will
+ * get flushed before giving the buffer back to hardware.
+ * vlsi_fill_rx() will do this anyway - but here we rely on.
+ */
+ le16_to_cpus(rd->buf+len);
+ if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) {
+ IRDA_DEBUG(0, "%s: crc error\n", __FUNCTION__);
+ ret |= VLSI_RX_CRC;
+ goto done;
+ }
+ }
+
+ if (!rd->skb) {
+ IRDA_WARNING("%s: rx packet lost\n", __FUNCTION__);
+ ret |= VLSI_RX_DROP;
+ goto done;
+ }
+
+ skb = rd->skb;
+ rd->skb = NULL;
+ skb->dev = ndev;
+ memcpy(skb_put(skb,len), rd->buf, len);
+ skb->mac.raw = skb->data;
+ if (in_interrupt())
+ netif_rx(skb);
+ else
+ netif_rx_ni(skb);
+ ndev->last_rx = jiffies;
+
+done:
+ rd_set_status(rd, 0);
+ rd_set_count(rd, 0);
+ /* buffer still owned by CPU */
+
+ return (ret) ? -ret : len;
+}
+
+static void vlsi_fill_rx(struct vlsi_ring *r)
+{
+ struct ring_descr *rd;
+
+ for (rd = ring_last(r); rd != NULL; rd = ring_put(r)) {
+ if (rd_is_active(rd)) {
+ IRDA_WARNING("%s: driver bug: rx descr race with hw\n",
+ __FUNCTION__);
+ vlsi_ring_debug(r);
+ break;
+ }
+ if (!rd->skb) {
+ rd->skb = dev_alloc_skb(IRLAP_SKB_ALLOCSIZE);
+ if (rd->skb) {
+ skb_reserve(rd->skb,1);
+ rd->skb->protocol = htons(ETH_P_IRDA);
+ }
+ else
+ break; /* probably not worth logging? */
+ }
+ /* give dma buffer back to busmaster */
+ pci_dma_sync_single_for_device(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ rd_activate(rd);
+ }
+}
+
+static void vlsi_rx_interrupt(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct vlsi_ring *r = idev->rx_ring;
+ struct ring_descr *rd;
+ int ret;
+
+ for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) {
+
+ if (rd_is_active(rd))
+ break;
+
+ ret = vlsi_process_rx(r, rd);
+
+ if (ret < 0) {
+ ret = -ret;
+ idev->stats.rx_errors++;
+ if (ret & VLSI_RX_DROP)
+ idev->stats.rx_dropped++;
+ if (ret & VLSI_RX_OVER)
+ idev->stats.rx_over_errors++;
+ if (ret & VLSI_RX_LENGTH)
+ idev->stats.rx_length_errors++;
+ if (ret & VLSI_RX_FRAME)
+ idev->stats.rx_frame_errors++;
+ if (ret & VLSI_RX_CRC)
+ idev->stats.rx_crc_errors++;
+ }
+ else if (ret > 0) {
+ idev->stats.rx_packets++;
+ idev->stats.rx_bytes += ret;
+ }
+ }
+
+ do_gettimeofday(&idev->last_rx); /* remember "now" for later mtt delay */
+
+ vlsi_fill_rx(r);
+
+ if (ring_first(r) == NULL) {
+ /* we are in big trouble, if this should ever happen */
+ IRDA_ERROR("%s: rx ring exhausted!\n", __FUNCTION__);
+ vlsi_ring_debug(r);
+ }
+ else
+ outw(0, ndev->base_addr+VLSI_PIO_PROMPT);
+}
+
+/* caller must have stopped the controller from busmastering */
+
+static void vlsi_unarm_rx(vlsi_irda_dev_t *idev)
+{
+ struct vlsi_ring *r = idev->rx_ring;
+ struct ring_descr *rd;
+ int ret;
+
+ for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) {
+
+ ret = 0;
+ if (rd_is_active(rd)) {
+ rd_set_status(rd, 0);
+ if (rd_get_count(rd)) {
+ IRDA_DEBUG(0, "%s - dropping rx packet\n", __FUNCTION__);
+ ret = -VLSI_RX_DROP;
+ }
+ rd_set_count(rd, 0);
+ pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ if (rd->skb) {
+ dev_kfree_skb_any(rd->skb);
+ rd->skb = NULL;
+ }
+ }
+ else
+ ret = vlsi_process_rx(r, rd);
+
+ if (ret < 0) {
+ ret = -ret;
+ idev->stats.rx_errors++;
+ if (ret & VLSI_RX_DROP)
+ idev->stats.rx_dropped++;
+ if (ret & VLSI_RX_OVER)
+ idev->stats.rx_over_errors++;
+ if (ret & VLSI_RX_LENGTH)
+ idev->stats.rx_length_errors++;
+ if (ret & VLSI_RX_FRAME)
+ idev->stats.rx_frame_errors++;
+ if (ret & VLSI_RX_CRC)
+ idev->stats.rx_crc_errors++;
+ }
+ else if (ret > 0) {
+ idev->stats.rx_packets++;
+ idev->stats.rx_bytes += ret;
+ }
+ }
+}
+
+/********************************************************/
+
+static int vlsi_process_tx(struct vlsi_ring *r, struct ring_descr *rd)
+{
+ u16 status;
+ int len;
+ int ret;
+
+ pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ /* dma buffer now owned by the CPU */
+ status = rd_get_status(rd);
+ if (status & RD_TX_UNDRN)
+ ret = VLSI_TX_FIFO;
+ else
+ ret = 0;
+ rd_set_status(rd, 0);
+
+ if (rd->skb) {
+ len = rd->skb->len;
+ dev_kfree_skb_any(rd->skb);
+ rd->skb = NULL;
+ }
+ else /* tx-skb already freed? - should never happen */
+ len = rd_get_count(rd); /* incorrect for SIR! (due to wrapping) */
+
+ rd_set_count(rd, 0);
+ /* dma buffer still owned by the CPU */
+
+ return (ret) ? -ret : len;
+}
+
+static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
+{
+ u16 nphyctl;
+ u16 config;
+ unsigned mode;
+ int ret;
+ int baudrate;
+ int fifocnt;
+
+ baudrate = idev->new_baud;
+ IRDA_DEBUG(2, "%s: %d -> %d\n", __FUNCTION__, idev->baud, idev->new_baud);
+ if (baudrate == 4000000) {
+ mode = IFF_FIR;
+ config = IRCFG_FIR;
+ nphyctl = PHYCTL_FIR;
+ }
+ else if (baudrate == 1152000) {
+ mode = IFF_MIR;
+ config = IRCFG_MIR | IRCFG_CRC16;
+ nphyctl = PHYCTL_MIR(clksrc==3);
+ }
+ else {
+ mode = IFF_SIR;
+ config = IRCFG_SIR | IRCFG_SIRFILT | IRCFG_RXANY;
+ switch(baudrate) {
+ default:
+ IRDA_WARNING("%s: undefined baudrate %d - fallback to 9600!\n",
+ __FUNCTION__, baudrate);
+ baudrate = 9600;
+ /* fallthru */
+ case 2400:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 57600:
+ case 115200:
+ nphyctl = PHYCTL_SIR(baudrate,sirpulse,clksrc==3);
+ break;
+ }
+ }
+ config |= IRCFG_MSTR | IRCFG_ENRX;
+
+ fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ if (fifocnt != 0) {
+ IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+ }
+
+ outw(0, iobase+VLSI_PIO_IRENABLE);
+ outw(config, iobase+VLSI_PIO_IRCFG);
+ outw(nphyctl, iobase+VLSI_PIO_NPHYCTL);
+ wmb();
+ outw(IRENABLE_PHYANDCLOCK, iobase+VLSI_PIO_IRENABLE);
+ mb();
+
+ udelay(1); /* chip applies IRCFG on next rising edge of its 8MHz clock */
+
+ /* read back settings for validation */
+
+ config = inw(iobase+VLSI_PIO_IRENABLE) & IRENABLE_MASK;
+
+ if (mode == IFF_FIR)
+ config ^= IRENABLE_FIR_ON;
+ else if (mode == IFF_MIR)
+ config ^= (IRENABLE_MIR_ON|IRENABLE_CRC16_ON);
+ else
+ config ^= IRENABLE_SIR_ON;
+
+ if (config != (IRENABLE_PHYANDCLOCK|IRENABLE_ENRXST)) {
+ IRDA_WARNING("%s: failed to set %s mode!\n", __FUNCTION__,
+ (mode==IFF_SIR)?"SIR":((mode==IFF_MIR)?"MIR":"FIR"));
+ ret = -1;
+ }
+ else {
+ if (inw(iobase+VLSI_PIO_PHYCTL) != nphyctl) {
+ IRDA_WARNING("%s: failed to apply baudrate %d\n",
+ __FUNCTION__, baudrate);
+ ret = -1;
+ }
+ else {
+ idev->mode = mode;
+ idev->baud = baudrate;
+ idev->new_baud = 0;
+ ret = 0;
+ }
+ }
+
+ if (ret)
+ vlsi_reg_debug(iobase,__FUNCTION__);
+
+ return ret;
+}
+
+static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct vlsi_ring *r = idev->tx_ring;
+ struct ring_descr *rd;
+ unsigned long flags;
+ unsigned iobase = ndev->base_addr;
+ u8 status;
+ u16 config;
+ int mtt;
+ int len, speed;
+ struct timeval now, ready;
+ char *msg = NULL;
+
+ speed = irda_get_next_speed(skb);
+ spin_lock_irqsave(&idev->lock, flags);
+ if (speed != -1 && speed != idev->baud) {
+ netif_stop_queue(ndev);
+ idev->new_baud = speed;
+ status = RD_TX_CLRENTX; /* stop tx-ring after this frame */
+ }
+ else
+ status = 0;
+
+ if (skb->len == 0) {
+ /* handle zero packets - should be speed change */
+ if (status == 0) {
+ msg = "bogus zero-length packet";
+ goto drop_unlock;
+ }
+
+ /* due to the completely asynch tx operation we might have
+ * IrLAP racing with the hardware here, f.e. if the controller
+ * is just sending the last packet with current speed while
+ * the LAP is already switching the speed using synchronous
+ * len=0 packet. Immediate execution would lead to hw lockup
+ * requiring a powercycle to reset. Good candidate to trigger
+ * this is the final UA:RSP packet after receiving a DISC:CMD
+ * when getting the LAP down.
+ * Note that we are not protected by the queue_stop approach
+ * because the final UA:RSP arrives _without_ request to apply
+ * new-speed-after-this-packet - hence the driver doesn't know
+ * this was the last packet and doesn't stop the queue. So the
+ * forced switch to default speed from LAP gets through as fast
+ * as only some 10 usec later while the UA:RSP is still processed
+ * by the hardware and we would get screwed.
+ */
+
+ if (ring_first(idev->tx_ring) == NULL) {
+ /* no race - tx-ring already empty */
+ vlsi_set_baud(idev, iobase);
+ netif_wake_queue(ndev);
+ }
+ else
+ ;
+ /* keep the speed change pending like it would
+ * for any len>0 packet. tx completion interrupt
+ * will apply it when the tx ring becomes empty.
+ */
+ spin_unlock_irqrestore(&idev->lock, flags);
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+
+ /* sanity checks - simply drop the packet */
+
+ rd = ring_last(r);
+ if (!rd) {
+ msg = "ring full, but queue wasn't stopped";
+ goto drop_unlock;
+ }
+
+ if (rd_is_active(rd)) {
+ msg = "entry still owned by hw";
+ goto drop_unlock;
+ }
+
+ if (!rd->buf) {
+ msg = "tx ring entry without pci buffer";
+ goto drop_unlock;
+ }
+
+ if (rd->skb) {
+ msg = "ring entry with old skb still attached";
+ goto drop_unlock;
+ }
+
+ /* no need for serialization or interrupt disable during mtt */
+ spin_unlock_irqrestore(&idev->lock, flags);
+
+ if ((mtt = irda_get_mtt(skb)) > 0) {
+
+ ready.tv_usec = idev->last_rx.tv_usec + mtt;
+ ready.tv_sec = idev->last_rx.tv_sec;
+ if (ready.tv_usec >= 1000000) {
+ ready.tv_usec -= 1000000;
+ ready.tv_sec++; /* IrLAP 1.1: mtt always < 1 sec */
+ }
+ for(;;) {
+ do_gettimeofday(&now);
+ if (now.tv_sec > ready.tv_sec
+ || (now.tv_sec==ready.tv_sec && now.tv_usec>=ready.tv_usec))
+ break;
+ udelay(100);
+ /* must not sleep here - we are called under xmit_lock! */
+ }
+ }
+
+ /* tx buffer already owned by CPU due to pci_dma_sync_single_for_cpu()
+ * after subsequent tx-completion
+ */
+
+ if (idev->mode == IFF_SIR) {
+ status |= RD_TX_DISCRC; /* no hw-crc creation */
+ len = async_wrap_skb(skb, rd->buf, r->len);
+
+ /* Some rare worst case situation in SIR mode might lead to
+ * potential buffer overflow. The wrapper detects this, returns
+ * with a shortened frame (without FCS/EOF) but doesn't provide
+ * any error indication about the invalid packet which we are
+ * going to transmit.
+ * Therefore we log if the buffer got filled to the point, where the
+ * wrapper would abort, i.e. when there are less than 5 bytes left to
+ * allow appending the FCS/EOF.
+ */
+
+ if (len >= r->len-5)
+ IRDA_WARNING("%s: possible buffer overflow with SIR wrapping!\n",
+ __FUNCTION__);
+ }
+ else {
+ /* hw deals with MIR/FIR mode wrapping */
+ status |= RD_TX_PULSE; /* send 2 us highspeed indication pulse */
+ len = skb->len;
+ if (len > r->len) {
+ msg = "frame exceeds tx buffer length";
+ goto drop;
+ }
+ else
+ memcpy(rd->buf, skb->data, len);
+ }
+
+ rd->skb = skb; /* remember skb for tx-complete stats */
+
+ rd_set_count(rd, len);
+ rd_set_status(rd, status); /* not yet active! */
+
+ /* give dma buffer back to busmaster-hw (flush caches to make
+ * CPU-driven changes visible from the pci bus).
+ */
+
+ pci_dma_sync_single_for_device(r->pdev, rd_get_addr(rd), r->len, r->dir);
+
+/* Switching to TX mode here races with the controller
+ * which may stop TX at any time when fetching an inactive descriptor
+ * or one with CLR_ENTX set. So we switch on TX only, if TX was not running
+ * _after_ the new descriptor was activated on the ring. This ensures
+ * we will either find TX already stopped or we can be sure, there
+ * will be a TX-complete interrupt even if the chip stopped doing
+ * TX just after we found it still running. The ISR will then find
+ * the non-empty ring and restart TX processing. The enclosing
+ * spinlock provides the correct serialization to prevent race with isr.
+ */
+
+ spin_lock_irqsave(&idev->lock,flags);
+
+ rd_activate(rd);
+
+ if (!(inw(iobase+VLSI_PIO_IRENABLE) & IRENABLE_ENTXST)) {
+ int fifocnt;
+
+ fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ if (fifocnt != 0) {
+ IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+ }
+
+ config = inw(iobase+VLSI_PIO_IRCFG);
+ mb();
+ outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG);
+ wmb();
+ outw(0, iobase+VLSI_PIO_PROMPT);
+ }
+ ndev->trans_start = jiffies;
+
+ if (ring_put(r) == NULL) {
+ netif_stop_queue(ndev);
+ IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __FUNCTION__);
+ }
+ spin_unlock_irqrestore(&idev->lock, flags);
+
+ return 0;
+
+drop_unlock:
+ spin_unlock_irqrestore(&idev->lock, flags);
+drop:
+ IRDA_WARNING("%s: dropping packet - %s\n", __FUNCTION__, msg);
+ dev_kfree_skb_any(skb);
+ idev->stats.tx_errors++;
+ idev->stats.tx_dropped++;
+ /* Don't even think about returning NET_XMIT_DROP (=1) here!
+ * In fact any retval!=0 causes the packet scheduler to requeue the
+ * packet for later retry of transmission - which isn't exactly
+ * what we want after we've just called dev_kfree_skb_any ;-)
+ */
+ return 0;
+}
+
+static void vlsi_tx_interrupt(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct vlsi_ring *r = idev->tx_ring;
+ struct ring_descr *rd;
+ unsigned iobase;
+ int ret;
+ u16 config;
+
+ for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) {
+
+ if (rd_is_active(rd))
+ break;
+
+ ret = vlsi_process_tx(r, rd);
+
+ if (ret < 0) {
+ ret = -ret;
+ idev->stats.tx_errors++;
+ if (ret & VLSI_TX_DROP)
+ idev->stats.tx_dropped++;
+ if (ret & VLSI_TX_FIFO)
+ idev->stats.tx_fifo_errors++;
+ }
+ else if (ret > 0){
+ idev->stats.tx_packets++;
+ idev->stats.tx_bytes += ret;
+ }
+ }
+
+ iobase = ndev->base_addr;
+
+ if (idev->new_baud && rd == NULL) /* tx ring empty and speed change pending */
+ vlsi_set_baud(idev, iobase);
+
+ config = inw(iobase+VLSI_PIO_IRCFG);
+ if (rd == NULL) /* tx ring empty: re-enable rx */
+ outw((config & ~IRCFG_ENTX) | IRCFG_ENRX, iobase+VLSI_PIO_IRCFG);
+
+ else if (!(inw(iobase+VLSI_PIO_IRENABLE) & IRENABLE_ENTXST)) {
+ int fifocnt;
+
+ fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ if (fifocnt != 0) {
+ IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n",
+ __FUNCTION__, fifocnt);
+ }
+ outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG);
+ }
+
+ outw(0, iobase+VLSI_PIO_PROMPT);
+
+ if (netif_queue_stopped(ndev) && !idev->new_baud) {
+ netif_wake_queue(ndev);
+ IRDA_DEBUG(3, "%s: queue awoken\n", __FUNCTION__);
+ }
+}
+
+/* caller must have stopped the controller from busmastering */
+
+static void vlsi_unarm_tx(vlsi_irda_dev_t *idev)
+{
+ struct vlsi_ring *r = idev->tx_ring;
+ struct ring_descr *rd;
+ int ret;
+
+ for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) {
+
+ ret = 0;
+ if (rd_is_active(rd)) {
+ rd_set_status(rd, 0);
+ rd_set_count(rd, 0);
+ pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir);
+ if (rd->skb) {
+ dev_kfree_skb_any(rd->skb);
+ rd->skb = NULL;
+ }
+ IRDA_DEBUG(0, "%s - dropping tx packet\n", __FUNCTION__);
+ ret = -VLSI_TX_DROP;
+ }
+ else
+ ret = vlsi_process_tx(r, rd);
+
+ if (ret < 0) {
+ ret = -ret;
+ idev->stats.tx_errors++;
+ if (ret & VLSI_TX_DROP)
+ idev->stats.tx_dropped++;
+ if (ret & VLSI_TX_FIFO)
+ idev->stats.tx_fifo_errors++;
+ }
+ else if (ret > 0){
+ idev->stats.tx_packets++;
+ idev->stats.tx_bytes += ret;
+ }
+ }
+
+}
+
+/********************************************************/
+
+static int vlsi_start_clock(struct pci_dev *pdev)
+{
+ u8 clkctl, lock;
+ int i, count;
+
+ if (clksrc < 2) { /* auto or PLL: try PLL */
+ clkctl = CLKCTL_PD_INV | CLKCTL_CLKSTP;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+
+ /* procedure to detect PLL lock synchronisation:
+ * after 0.5 msec initial delay we expect to find 3 PLL lock
+ * indications within 10 msec for successful PLL detection.
+ */
+ udelay(500);
+ count = 0;
+ for (i = 500; i <= 10000; i += 50) { /* max 10 msec */
+ pci_read_config_byte(pdev, VLSI_PCI_CLKCTL, &lock);
+ if (lock&CLKCTL_LOCK) {
+ if (++count >= 3)
+ break;
+ }
+ udelay(50);
+ }
+ if (count < 3) {
+ if (clksrc == 1) { /* explicitly asked for PLL hence bail out */
+ IRDA_ERROR("%s: no PLL or failed to lock!\n",
+ __FUNCTION__);
+ clkctl = CLKCTL_CLKSTP;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+ return -1;
+ }
+ else /* was: clksrc=0(auto) */
+ clksrc = 3; /* fallback to 40MHz XCLK (OB800) */
+
+ IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n",
+ __FUNCTION__, clksrc);
+ }
+ else
+ clksrc = 1; /* got successful PLL lock */
+ }
+
+ if (clksrc != 1) {
+ /* we get here if either no PLL detected in auto-mode or
+ an external clock source was explicitly specified */
+
+ clkctl = CLKCTL_EXTCLK | CLKCTL_CLKSTP;
+ if (clksrc == 3)
+ clkctl |= CLKCTL_XCKSEL;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+
+ /* no way to test for working XCLK */
+ }
+ else
+ pci_read_config_byte(pdev, VLSI_PCI_CLKCTL, &clkctl);
+
+ /* ok, now going to connect the chip with the clock source */
+
+ clkctl &= ~CLKCTL_CLKSTP;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+
+ return 0;
+}
+
+static void vlsi_stop_clock(struct pci_dev *pdev)
+{
+ u8 clkctl;
+
+ /* disconnect chip from clock source */
+ pci_read_config_byte(pdev, VLSI_PCI_CLKCTL, &clkctl);
+ clkctl |= CLKCTL_CLKSTP;
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+
+ /* disable all clock sources */
+ clkctl &= ~(CLKCTL_EXTCLK | CLKCTL_PD_INV);
+ pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
+}
+
+/********************************************************/
+
+/* writing all-zero to the VLSI PCI IO register area seems to prevent
+ * some occasional situations where the hardware fails (symptoms are
+ * what appears as stalled tx/rx state machines, i.e. everything ok for
+ * receive or transmit but hw makes no progress or is unable to access
+ * the bus memory locations).
+ * Best place to call this is immediately after/before the internal clock
+ * gets started/stopped.
+ */
+
+static inline void vlsi_clear_regs(unsigned iobase)
+{
+ unsigned i;
+ const unsigned chip_io_extent = 32;
+
+ for (i = 0; i < chip_io_extent; i += sizeof(u16))
+ outw(0, iobase + i);
+}
+
+static int vlsi_init_chip(struct pci_dev *pdev)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ vlsi_irda_dev_t *idev = ndev->priv;
+ unsigned iobase;
+ u16 ptr;
+
+ /* start the clock and clean the registers */
+
+ if (vlsi_start_clock(pdev)) {
+ IRDA_ERROR("%s: no valid clock source\n", __FUNCTION__);
+ return -1;
+ }
+ iobase = ndev->base_addr;
+ vlsi_clear_regs(iobase);
+
+ outb(IRINTR_INT_MASK, iobase+VLSI_PIO_IRINTR); /* w/c pending IRQ, disable all INT */
+
+ outw(0, iobase+VLSI_PIO_IRENABLE); /* disable IrPHY-interface */
+
+ /* disable everything, particularly IRCFG_MSTR - (also resetting the RING_PTR) */
+
+ outw(0, iobase+VLSI_PIO_IRCFG);
+ wmb();
+
+ outw(MAX_PACKET_LENGTH, iobase+VLSI_PIO_MAXPKT); /* max possible value=0x0fff */
+
+ outw(BUS_TO_RINGBASE(idev->busaddr), iobase+VLSI_PIO_RINGBASE);
+
+ outw(TX_RX_TO_RINGSIZE(idev->tx_ring->size, idev->rx_ring->size),
+ iobase+VLSI_PIO_RINGSIZE);
+
+ ptr = inw(iobase+VLSI_PIO_RINGPTR);
+ atomic_set(&idev->rx_ring->head, RINGPTR_GET_RX(ptr));
+ atomic_set(&idev->rx_ring->tail, RINGPTR_GET_RX(ptr));
+ atomic_set(&idev->tx_ring->head, RINGPTR_GET_TX(ptr));
+ atomic_set(&idev->tx_ring->tail, RINGPTR_GET_TX(ptr));
+
+ vlsi_set_baud(idev, iobase); /* idev->new_baud used as provided by caller */
+
+ outb(IRINTR_INT_MASK, iobase+VLSI_PIO_IRINTR); /* just in case - w/c pending IRQ's */
+ wmb();
+
+ /* DO NOT BLINDLY ENABLE IRINTR_ACTEN!
+ * basically every received pulse fires an ACTIVITY-INT
+ * leading to >>1000 INT's per second instead of few 10
+ */
+
+ outb(IRINTR_RPKTEN|IRINTR_TPKTEN, iobase+VLSI_PIO_IRINTR);
+
+ return 0;
+}
+
+static int vlsi_start_hw(vlsi_irda_dev_t *idev)
+{
+ struct pci_dev *pdev = idev->pdev;
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ unsigned iobase = ndev->base_addr;
+ u8 byte;
+
+ /* we don't use the legacy UART, disable its address decoding */
+
+ pci_read_config_byte(pdev, VLSI_PCI_IRMISC, &byte);
+ byte &= ~(IRMISC_UARTEN | IRMISC_UARTTST);
+ pci_write_config_byte(pdev, VLSI_PCI_IRMISC, byte);
+
+ /* enable PCI busmaster access to our 16MB page */
+
+ pci_write_config_byte(pdev, VLSI_PCI_MSTRPAGE, MSTRPAGE_VALUE);
+ pci_set_master(pdev);
+
+ if (vlsi_init_chip(pdev) < 0) {
+ pci_disable_device(pdev);
+ return -1;
+ }
+
+ vlsi_fill_rx(idev->rx_ring);
+
+ do_gettimeofday(&idev->last_rx); /* first mtt may start from now on */
+
+ outw(0, iobase+VLSI_PIO_PROMPT); /* kick hw state machine */
+
+ return 0;
+}
+
+static int vlsi_stop_hw(vlsi_irda_dev_t *idev)
+{
+ struct pci_dev *pdev = idev->pdev;
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ unsigned iobase = ndev->base_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&idev->lock,flags);
+ outw(0, iobase+VLSI_PIO_IRENABLE);
+ outw(0, iobase+VLSI_PIO_IRCFG); /* disable everything */
+
+ /* disable and w/c irqs */
+ outb(0, iobase+VLSI_PIO_IRINTR);
+ wmb();
+ outb(IRINTR_INT_MASK, iobase+VLSI_PIO_IRINTR);
+ spin_unlock_irqrestore(&idev->lock,flags);
+
+ vlsi_unarm_tx(idev);
+ vlsi_unarm_rx(idev);
+
+ vlsi_clear_regs(iobase);
+ vlsi_stop_clock(pdev);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+/**************************************************************/
+
+static struct net_device_stats * vlsi_get_stats(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+
+ return &idev->stats;
+}
+
+static void vlsi_tx_timeout(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+
+
+ vlsi_reg_debug(ndev->base_addr, __FUNCTION__);
+ vlsi_ring_debug(idev->tx_ring);
+
+ if (netif_running(ndev))
+ netif_stop_queue(ndev);
+
+ vlsi_stop_hw(idev);
+
+ /* now simply restart the whole thing */
+
+ if (!idev->new_baud)
+ idev->new_baud = idev->baud; /* keep current baudrate */
+
+ if (vlsi_start_hw(idev))
+ IRDA_ERROR("%s: failed to restart hw - %s(%s) unusable!\n",
+ __FUNCTION__, PCIDEV_NAME(idev->pdev), ndev->name);
+ else
+ netif_start_queue(ndev);
+}
+
+static int vlsi_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ unsigned long flags;
+ u16 fifocnt;
+ int ret = 0;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+ spin_lock_irqsave(&idev->lock, flags);
+ idev->new_baud = irq->ifr_baudrate;
+ /* when called from userland there might be a minor race window here
+ * if the stack tries to change speed concurrently - which would be
+ * pretty strange anyway with the userland having full control...
+ */
+ vlsi_set_baud(idev, ndev->base_addr);
+ spin_unlock_irqrestore(&idev->lock, flags);
+ break;
+ case SIOCSMEDIABUSY:
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+ irda_device_set_media_busy(ndev, TRUE);
+ break;
+ case SIOCGRECEIVING:
+ /* the best we can do: check whether there are any bytes in rx fifo.
+ * The trustable window (in case some data arrives just afterwards)
+ * may be as short as 1usec or so at 4Mbps.
+ */
+ fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
+ irq->ifr_receiving = (fifocnt!=0) ? 1 : 0;
+ break;
+ default:
+ IRDA_WARNING("%s: notsupp - cmd=%04x\n",
+ __FUNCTION__, cmd);
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/********************************************************/
+
+static irqreturn_t vlsi_interrupt(int irq, void *dev_instance,
+ struct pt_regs *regs)
+{
+ struct net_device *ndev = dev_instance;
+ vlsi_irda_dev_t *idev = ndev->priv;
+ unsigned iobase;
+ u8 irintr;
+ int boguscount = 5;
+ unsigned long flags;
+ int handled = 0;
+
+ iobase = ndev->base_addr;
+ spin_lock_irqsave(&idev->lock,flags);
+ do {
+ irintr = inb(iobase+VLSI_PIO_IRINTR);
+ mb();
+ outb(irintr, iobase+VLSI_PIO_IRINTR); /* acknowledge asap */
+
+ if (!(irintr&=IRINTR_INT_MASK)) /* not our INT - probably shared */
+ break;
+
+ handled = 1;
+
+ if (unlikely(!(irintr & ~IRINTR_ACTIVITY)))
+ break; /* nothing todo if only activity */
+
+ if (irintr&IRINTR_RPKTINT)
+ vlsi_rx_interrupt(ndev);
+
+ if (irintr&IRINTR_TPKTINT)
+ vlsi_tx_interrupt(ndev);
+
+ } while (--boguscount > 0);
+ spin_unlock_irqrestore(&idev->lock,flags);
+
+ if (boguscount <= 0)
+ IRDA_MESSAGE("%s: too much work in interrupt!\n",
+ __FUNCTION__);
+ return IRQ_RETVAL(handled);
+}
+
+/********************************************************/
+
+static int vlsi_open(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ int err = -EAGAIN;
+ char hwname[32];
+
+ if (pci_request_regions(idev->pdev, drivername)) {
+ IRDA_WARNING("%s: io resource busy\n", __FUNCTION__);
+ goto errout;
+ }
+ ndev->base_addr = pci_resource_start(idev->pdev,0);
+ ndev->irq = idev->pdev->irq;
+
+ /* under some rare occasions the chip apparently comes up with
+ * IRQ's pending. We better w/c pending IRQ and disable them all
+ */
+
+ outb(IRINTR_INT_MASK, ndev->base_addr+VLSI_PIO_IRINTR);
+
+ if (request_irq(ndev->irq, vlsi_interrupt, SA_SHIRQ,
+ drivername, ndev)) {
+ IRDA_WARNING("%s: couldn't get IRQ: %d\n",
+ __FUNCTION__, ndev->irq);
+ goto errout_io;
+ }
+
+ if ((err = vlsi_create_hwif(idev)) != 0)
+ goto errout_irq;
+
+ sprintf(hwname, "VLSI-FIR @ 0x%04x", (unsigned)ndev->base_addr);
+ idev->irlap = irlap_open(ndev,&idev->qos,hwname);
+ if (!idev->irlap)
+ goto errout_free_ring;
+
+ do_gettimeofday(&idev->last_rx); /* first mtt may start from now on */
+
+ idev->new_baud = 9600; /* start with IrPHY using 9600(SIR) mode */
+
+ if ((err = vlsi_start_hw(idev)) != 0)
+ goto errout_close_irlap;
+
+ netif_start_queue(ndev);
+
+ IRDA_MESSAGE("%s: device %s operational\n", __FUNCTION__, ndev->name);
+
+ return 0;
+
+errout_close_irlap:
+ irlap_close(idev->irlap);
+errout_free_ring:
+ vlsi_destroy_hwif(idev);
+errout_irq:
+ free_irq(ndev->irq,ndev);
+errout_io:
+ pci_release_regions(idev->pdev);
+errout:
+ return err;
+}
+
+static int vlsi_close(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+
+ netif_stop_queue(ndev);
+
+ if (idev->irlap)
+ irlap_close(idev->irlap);
+ idev->irlap = NULL;
+
+ vlsi_stop_hw(idev);
+
+ vlsi_destroy_hwif(idev);
+
+ free_irq(ndev->irq,ndev);
+
+ pci_release_regions(idev->pdev);
+
+ IRDA_MESSAGE("%s: device %s stopped\n", __FUNCTION__, ndev->name);
+
+ return 0;
+}
+
+static int vlsi_irda_init(struct net_device *ndev)
+{
+ vlsi_irda_dev_t *idev = ndev->priv;
+ struct pci_dev *pdev = idev->pdev;
+
+ SET_MODULE_OWNER(ndev);
+
+ ndev->irq = pdev->irq;
+ ndev->base_addr = pci_resource_start(pdev,0);
+
+ /* PCI busmastering
+ * see include file for details why we need these 2 masks, in this order!
+ */
+
+ if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW)
+ || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) {
+ IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __FUNCTION__);
+ return -1;
+ }
+
+ irda_init_max_qos_capabilies(&idev->qos);
+
+ /* the VLSI82C147 does not support 576000! */
+
+ idev->qos.baud_rate.bits = IR_2400 | IR_9600
+ | IR_19200 | IR_38400 | IR_57600 | IR_115200
+ | IR_1152000 | (IR_4000000 << 8);
+
+ idev->qos.min_turn_time.bits = qos_mtt_bits;
+
+ irda_qos_bits_to_value(&idev->qos);
+
+ /* currently no public media definitions for IrDA */
+
+ ndev->flags |= IFF_PORTSEL | IFF_AUTOMEDIA;
+ ndev->if_port = IF_PORT_UNKNOWN;
+
+ ndev->open = vlsi_open;
+ ndev->stop = vlsi_close;
+ ndev->get_stats = vlsi_get_stats;
+ ndev->hard_start_xmit = vlsi_hard_start_xmit;
+ ndev->do_ioctl = vlsi_ioctl;
+ ndev->tx_timeout = vlsi_tx_timeout;
+ ndev->watchdog_timeo = 500*HZ/1000; /* max. allowed turn time for IrLAP */
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ return 0;
+}
+
+/**************************************************************/
+
+static int __devinit
+vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct net_device *ndev;
+ vlsi_irda_dev_t *idev;
+
+ if (pci_enable_device(pdev))
+ goto out;
+ else
+ pdev->current_state = 0; /* hw must be running now */
+
+ IRDA_MESSAGE("%s: IrDA PCI controller %s detected\n",
+ drivername, PCIDEV_NAME(pdev));
+
+ if ( !pci_resource_start(pdev,0)
+ || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
+ IRDA_ERROR("%s: bar 0 invalid", __FUNCTION__);
+ goto out_disable;
+ }
+
+ ndev = alloc_irdadev(sizeof(*idev));
+ if (ndev==NULL) {
+ IRDA_ERROR("%s: Unable to allocate device memory.\n",
+ __FUNCTION__);
+ goto out_disable;
+ }
+
+ idev = ndev->priv;
+
+ spin_lock_init(&idev->lock);
+ init_MUTEX(&idev->sem);
+ down(&idev->sem);
+ idev->pdev = pdev;
+
+ if (vlsi_irda_init(ndev) < 0)
+ goto out_freedev;
+
+ if (register_netdev(ndev) < 0) {
+ IRDA_ERROR("%s: register_netdev failed\n", __FUNCTION__);
+ goto out_freedev;
+ }
+
+ if (vlsi_proc_root != NULL) {
+ struct proc_dir_entry *ent;
+
+ ent = create_proc_entry(ndev->name, S_IFREG|S_IRUGO, vlsi_proc_root);
+ if (!ent) {
+ IRDA_WARNING("%s: failed to create proc entry\n",
+ __FUNCTION__);
+ } else {
+ ent->data = ndev;
+ ent->proc_fops = VLSI_PROC_FOPS;
+ ent->size = 0;
+ }
+ idev->proc_entry = ent;
+ }
+ IRDA_MESSAGE("%s: registered device %s\n", drivername, ndev->name);
+
+ pci_set_drvdata(pdev, ndev);
+ up(&idev->sem);
+
+ return 0;
+
+out_freedev:
+ up(&idev->sem);
+ free_netdev(ndev);
+out_disable:
+ pci_disable_device(pdev);
+out:
+ pci_set_drvdata(pdev, NULL);
+ return -ENODEV;
+}
+
+static void __devexit vlsi_irda_remove(struct pci_dev *pdev)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ vlsi_irda_dev_t *idev;
+
+ if (!ndev) {
+ IRDA_ERROR("%s: lost netdevice?\n", drivername);
+ return;
+ }
+
+ unregister_netdev(ndev);
+
+ idev = ndev->priv;
+ down(&idev->sem);
+ if (idev->proc_entry) {
+ remove_proc_entry(ndev->name, vlsi_proc_root);
+ idev->proc_entry = NULL;
+ }
+ up(&idev->sem);
+
+ free_netdev(ndev);
+
+ pci_set_drvdata(pdev, NULL);
+
+ IRDA_MESSAGE("%s: %s removed\n", drivername, PCIDEV_NAME(pdev));
+}
+
+#ifdef CONFIG_PM
+
+/* The Controller doesn't provide PCI PM capabilities as defined by PCI specs.
+ * Some of the Linux PCI-PM code however depends on this, for example in
+ * pci_set_power_state(). So we have to take care to perform the required
+ * operations on our own (particularly reflecting the pdev->current_state)
+ * otherwise we might get cheated by pci-pm.
+ */
+
+
+static int vlsi_irda_suspend(struct pci_dev *pdev, u32 state)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ vlsi_irda_dev_t *idev;
+
+ if (state < 1 || state > 3 ) {
+ IRDA_ERROR("%s - %s: invalid pm state request: %u\n",
+ __FUNCTION__, PCIDEV_NAME(pdev), state);
+ return 0;
+ }
+ if (!ndev) {
+ IRDA_ERROR("%s - %s: no netdevice \n",
+ __FUNCTION__, PCIDEV_NAME(pdev));
+ return 0;
+ }
+ idev = ndev->priv;
+ down(&idev->sem);
+ if (pdev->current_state != 0) { /* already suspended */
+ if (state > pdev->current_state) { /* simply go deeper */
+ pci_set_power_state(pdev,state);
+ pdev->current_state = state;
+ }
+ else
+ IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state);
+ up(&idev->sem);
+ return 0;
+ }
+
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ vlsi_stop_hw(idev);
+ pci_save_state(pdev);
+ if (!idev->new_baud)
+ /* remember speed settings to restore on resume */
+ idev->new_baud = idev->baud;
+ }
+
+ pci_set_power_state(pdev,state);
+ pdev->current_state = state;
+ idev->resume_ok = 1;
+ up(&idev->sem);
+ return 0;
+}
+
+static int vlsi_irda_resume(struct pci_dev *pdev)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ vlsi_irda_dev_t *idev;
+
+ if (!ndev) {
+ IRDA_ERROR("%s - %s: no netdevice \n",
+ __FUNCTION__, PCIDEV_NAME(pdev));
+ return 0;
+ }
+ idev = ndev->priv;
+ down(&idev->sem);
+ if (pdev->current_state == 0) {
+ up(&idev->sem);
+ IRDA_WARNING("%s - %s: already resumed\n",
+ __FUNCTION__, PCIDEV_NAME(pdev));
+ return 0;
+ }
+
+ pci_set_power_state(pdev, 0);
+ pdev->current_state = 0;
+
+ if (!idev->resume_ok) {
+ /* should be obsolete now - but used to happen due to:
+ * - pci layer initially setting pdev->current_state = 4 (unknown)
+ * - pci layer did not walk the save_state-tree (might be APM problem)
+ * so we could not refuse to suspend from undefined state
+ * - vlsi_irda_suspend detected invalid state and refused to save
+ * configuration for resume - but was too late to stop suspending
+ * - vlsi_irda_resume got screwed when trying to resume from garbage
+ *
+ * now we explicitly set pdev->current_state = 0 after enabling the
+ * device and independently resume_ok should catch any garbage config.
+ */
+ IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
+ up(&idev->sem);
+ return 0;
+ }
+
+ if (netif_running(ndev)) {
+ pci_restore_state(pdev);
+ vlsi_start_hw(idev);
+ netif_device_attach(ndev);
+ }
+ idev->resume_ok = 0;
+ up(&idev->sem);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+/*********************************************************/
+
+static struct pci_driver vlsi_irda_driver = {
+ .name = drivername,
+ .id_table = vlsi_irda_table,
+ .probe = vlsi_irda_probe,
+ .remove = __devexit_p(vlsi_irda_remove),
+#ifdef CONFIG_PM
+ .suspend = vlsi_irda_suspend,
+ .resume = vlsi_irda_resume,
+#endif
+};
+
+#define PROC_DIR ("driver/" DRIVER_NAME)
+
+static int __init vlsi_mod_init(void)
+{
+ int i, ret;
+
+ if (clksrc < 0 || clksrc > 3) {
+ IRDA_ERROR("%s: invalid clksrc=%d\n", drivername, clksrc);
+ return -1;
+ }
+
+ for (i = 0; i < 2; i++) {
+ switch(ringsize[i]) {
+ case 4:
+ case 8:
+ case 16:
+ case 32:
+ case 64:
+ break;
+ default:
+ IRDA_WARNING("%s: invalid %s ringsize %d, using default=8", drivername, (i)?"rx":"tx", ringsize[i]);
+ ringsize[i] = 8;
+ break;
+ }
+ }
+
+ sirpulse = !!sirpulse;
+
+ /* create_proc_entry returns NULL if !CONFIG_PROC_FS.
+ * Failure to create the procfs entry is handled like running
+ * without procfs - it's not required for the driver to work.
+ */
+ vlsi_proc_root = create_proc_entry(PROC_DIR, S_IFDIR, NULL);
+ if (vlsi_proc_root) {
+ /* protect registered procdir against module removal.
+ * Because we are in the module init path there's no race
+ * window after create_proc_entry (and no barrier needed).
+ */
+ vlsi_proc_root->owner = THIS_MODULE;
+ }
+
+ ret = pci_module_init(&vlsi_irda_driver);
+
+ if (ret && vlsi_proc_root)
+ remove_proc_entry(PROC_DIR, NULL);
+ return ret;
+
+}
+
+static void __exit vlsi_mod_exit(void)
+{
+ pci_unregister_driver(&vlsi_irda_driver);
+ if (vlsi_proc_root)
+ remove_proc_entry(PROC_DIR, NULL);
+}
+
+module_init(vlsi_mod_init);
+module_exit(vlsi_mod_exit);
