Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
new file mode 100644
index 0000000..2d14a57
--- /dev/null
+++ b/drivers/input/touchscreen/mk712.c
@@ -0,0 +1,222 @@
+/*
+ * ICS MK712 touchscreen controller driver
+ *
+ * Copyright (c) 1999-2002 Transmeta Corporation
+ * Copyright (c) 2005 Rick Koch <n1gp@hotmail.com>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * This driver supports the ICS MicroClock MK712 TouchScreen controller,
+ * found in Gateway AOL Connected Touchpad computers.
+ *
+ * Documentation for ICS MK712 can be found at:
+ * http://www.icst.com/pdf/mk712.pdf
+ */
+
+/*
+ * 1999-12-18: original version, Daniel Quinlan
+ * 1999-12-19: added anti-jitter code, report pen-up events, fixed mk712_poll
+ * to use queue_empty, Nathan Laredo
+ * 1999-12-20: improved random point rejection, Nathan Laredo
+ * 2000-01-05: checked in new anti-jitter code, changed mouse protocol, fixed
+ * queue code, added module options, other fixes, Daniel Quinlan
+ * 2002-03-15: Clean up for kernel merge <alan@redhat.com>
+ * Fixed multi open race, fixed memory checks, fixed resource
+ * allocation, fixed close/powerdown bug, switched to new init
+ * 2005-01-18: Ported to 2.6 from 2.4.28, Rick Koch
+ * 2005-02-05: Rewritten for the input layer, Vojtech Pavlik
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <asm/io.h>
+
+MODULE_AUTHOR("Daniel Quinlan <quinlan@pathname.com>, Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_DESCRIPTION("ICS MicroClock MK712 TouchScreen driver");
+MODULE_LICENSE("GPL");
+
+static unsigned int mk712_io = 0x260; /* Also 0x200, 0x208, 0x300 */
+module_param_named(io, mk712_io, uint, 0);
+MODULE_PARM_DESC(io, "I/O base address of MK712 touchscreen controller");
+
+static unsigned int mk712_irq = 10; /* Also 12, 14, 15 */
+module_param_named(irq, mk712_irq, uint, 0);
+MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller");
+
+/* eight 8-bit registers */
+#define MK712_STATUS 0
+#define MK712_X 2
+#define MK712_Y 4
+#define MK712_CONTROL 6
+#define MK712_RATE 7
+
+/* status */
+#define MK712_STATUS_TOUCH 0x10
+#define MK712_CONVERSION_COMPLETE 0x80
+
+/* control */
+#define MK712_ENABLE_INT 0x01
+#define MK712_INT_ON_CONVERSION_COMPLETE 0x02
+#define MK712_INT_ON_CHANGE_IN_TOUCH_STATUS 0x04
+#define MK712_ENABLE_PERIODIC_CONVERSIONS 0x10
+#define MK712_READ_ONE_POINT 0x20
+#define MK712_POWERUP 0x40
+
+static int mk712_used = 0;
+static struct input_dev mk712_dev;
+static DEFINE_SPINLOCK(mk712_lock);
+
+static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned char status;
+ static int debounce = 1;
+ static unsigned short last_x;
+ static unsigned short last_y;
+
+ spin_lock(&mk712_lock);
+ input_regs(&mk712_dev, regs);
+
+ status = inb(mk712_io + MK712_STATUS);
+
+ if (~status & MK712_CONVERSION_COMPLETE) {
+ debounce = 1;
+ goto end;
+ }
+
+ if (~status & MK712_STATUS_TOUCH)
+ {
+ debounce = 1;
+ input_report_key(&mk712_dev, BTN_TOUCH, 0);
+ goto end;
+ }
+
+ if (debounce)
+ {
+ debounce = 0;
+ goto end;
+ }
+
+ input_report_key(&mk712_dev, BTN_TOUCH, 1);
+ input_report_abs(&mk712_dev, ABS_X, last_x);
+ input_report_abs(&mk712_dev, ABS_Y, last_y);
+
+end:
+
+ last_x = inw(mk712_io + MK712_X) & 0x0fff;
+ last_y = inw(mk712_io + MK712_Y) & 0x0fff;
+ input_sync(&mk712_dev);
+ spin_unlock(&mk712_lock);
+ return IRQ_HANDLED;
+}
+
+static int mk712_open(struct input_dev *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mk712_lock, flags);
+
+ if (!mk712_used++) {
+
+ outb(0, mk712_io + MK712_CONTROL); /* Reset */
+
+ outb(MK712_ENABLE_INT | MK712_INT_ON_CONVERSION_COMPLETE |
+ MK712_INT_ON_CHANGE_IN_TOUCH_STATUS |
+ MK712_ENABLE_PERIODIC_CONVERSIONS |
+ MK712_POWERUP, mk712_io + MK712_CONTROL);
+
+ outb(10, mk712_io + MK712_RATE); /* 187 points per second */
+ }
+
+ spin_unlock_irqrestore(&mk712_lock, flags);
+
+ return 0;
+}
+
+static void mk712_close(struct input_dev *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mk712_lock, flags);
+
+ if (!--mk712_used)
+ outb(0, mk712_io + MK712_CONTROL);
+
+ spin_unlock_irqrestore(&mk712_lock, flags);
+}
+
+static struct input_dev mk712_dev = {
+ .evbit = { BIT(EV_KEY) | BIT(EV_ABS) },
+ .keybit = { [LONG(BTN_TOUCH)] = BIT(BTN_TOUCH) },
+ .absbit = { BIT(ABS_X) | BIT(ABS_Y) },
+ .open = mk712_open,
+ .close = mk712_close,
+ .name = "ICS MicroClock MK712 TouchScreen",
+ .phys = "isa0260/input0",
+ .absmin = { [ABS_X] = 0, [ABS_Y] = 0 },
+ .absmax = { [ABS_X] = 0xfff, [ABS_Y] = 0xfff },
+ .absfuzz = { [ABS_X] = 88, [ABS_Y] = 88 },
+ .id = {
+ .bustype = BUS_ISA,
+ .vendor = 0x0005,
+ .product = 0x0001,
+ .version = 0x0100,
+ },
+};
+
+int __init mk712_init(void)
+{
+
+ if(!request_region(mk712_io, 8, "mk712"))
+ {
+ printk(KERN_WARNING "mk712: unable to get IO region\n");
+ return -ENODEV;
+ }
+
+ outb(0, mk712_io + MK712_CONTROL);
+
+ if ((inw(mk712_io + MK712_X) & 0xf000) || /* Sanity check */
+ (inw(mk712_io + MK712_Y) & 0xf000) ||
+ (inw(mk712_io + MK712_STATUS) & 0xf333)) {
+ printk(KERN_WARNING "mk712: device not present\n");
+ release_region(mk712_io, 8);
+ return -ENODEV;
+ }
+
+ if(request_irq(mk712_irq, mk712_interrupt, 0, "mk712", &mk712_dev))
+ {
+ printk(KERN_WARNING "mk712: unable to get IRQ\n");
+ release_region(mk712_io, 8);
+ return -EBUSY;
+ }
+
+ input_register_device(&mk712_dev);
+
+ printk(KERN_INFO "input: ICS MicroClock MK712 TouchScreen at %#x irq %d\n", mk712_io, mk712_irq);
+
+ return 0;
+}
+
+static void __exit mk712_exit(void)
+{
+ input_unregister_device(&mk712_dev);
+ free_irq(mk712_irq, &mk712_dev);
+ release_region(mk712_io, 8);
+}
+
+module_init(mk712_init);
+module_exit(mk712_exit);
