Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c
new file mode 100644
index 0000000..68c4bb1
--- /dev/null
+++ b/drivers/acpi/executer/exmutex.c
@@ -0,0 +1,363 @@
+
+/******************************************************************************
+ *
+ * Module Name: exmutex - ASL Mutex Acquire/Release functions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exmutex")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_unlink_mutex
+ *
+ * PARAMETERS:  obj_desc            - The mutex to be unlinked
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Remove a mutex from the "acquired_mutex" list
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_unlink_mutex (
+	union acpi_operand_object       *obj_desc)
+{
+	struct acpi_thread_state        *thread = obj_desc->mutex.owner_thread;
+
+
+	if (!thread) {
+		return;
+	}
+
+	/* Doubly linked list */
+
+	if (obj_desc->mutex.next) {
+		(obj_desc->mutex.next)->mutex.prev = obj_desc->mutex.prev;
+	}
+
+	if (obj_desc->mutex.prev) {
+		(obj_desc->mutex.prev)->mutex.next = obj_desc->mutex.next;
+	}
+	else {
+		thread->acquired_mutex_list = obj_desc->mutex.next;
+	}
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_link_mutex
+ *
+ * PARAMETERS:  obj_desc            - The mutex to be linked
+ *              list_head           - head of the "acquired_mutex" list
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Add a mutex to the "acquired_mutex" list for this walk
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_link_mutex (
+	union acpi_operand_object       *obj_desc,
+	struct acpi_thread_state        *thread)
+{
+	union acpi_operand_object       *list_head;
+
+
+	list_head = thread->acquired_mutex_list;
+
+	/* This object will be the first object in the list */
+
+	obj_desc->mutex.prev = NULL;
+	obj_desc->mutex.next = list_head;
+
+	/* Update old first object to point back to this object */
+
+	if (list_head) {
+		list_head->mutex.prev = obj_desc;
+	}
+
+	/* Update list head */
+
+	thread->acquired_mutex_list = obj_desc;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_acquire_mutex
+ *
+ * PARAMETERS:  time_desc           - The 'time to delay' object descriptor
+ *              obj_desc            - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Acquire an AML mutex
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_acquire_mutex (
+	union acpi_operand_object       *time_desc,
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_acquire_mutex", obj_desc);
+
+
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/* Sanity check -- we must have a valid thread ID */
+
+	if (!walk_state->thread) {
+		ACPI_REPORT_ERROR (("Cannot acquire Mutex [%4.4s], null thread info\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_INTERNAL);
+	}
+
+	/*
+	 * Current Sync must be less than or equal to the sync level of the
+	 * mutex.  This mechanism provides some deadlock prevention
+	 */
+	if (walk_state->thread->current_sync_level > obj_desc->mutex.sync_level) {
+		ACPI_REPORT_ERROR (("Cannot acquire Mutex [%4.4s], incorrect sync_level\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_MUTEX_ORDER);
+	}
+
+	/* Support for multiple acquires by the owning thread */
+
+	if (obj_desc->mutex.owner_thread) {
+		/* Special case for Global Lock, allow all threads */
+
+		if ((obj_desc->mutex.owner_thread->thread_id == walk_state->thread->thread_id) ||
+			(obj_desc->mutex.semaphore == acpi_gbl_global_lock_semaphore)) {
+			/*
+			 * The mutex is already owned by this thread,
+			 * just increment the acquisition depth
+			 */
+			obj_desc->mutex.acquisition_depth++;
+			return_ACPI_STATUS (AE_OK);
+		}
+	}
+
+	/* Acquire the mutex, wait if necessary */
+
+	status = acpi_ex_system_acquire_mutex (time_desc, obj_desc);
+	if (ACPI_FAILURE (status)) {
+		/* Includes failure from a timeout on time_desc */
+
+		return_ACPI_STATUS (status);
+	}
+
+	/* Have the mutex: update mutex and walk info and save the sync_level */
+
+	obj_desc->mutex.owner_thread     = walk_state->thread;
+	obj_desc->mutex.acquisition_depth = 1;
+	obj_desc->mutex.original_sync_level = walk_state->thread->current_sync_level;
+
+	walk_state->thread->current_sync_level = obj_desc->mutex.sync_level;
+
+	/* Link the mutex to the current thread for force-unlock at method exit */
+
+	acpi_ex_link_mutex (obj_desc, walk_state->thread);
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_release_mutex
+ *
+ * PARAMETERS:  obj_desc            - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Release a previously acquired Mutex.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_release_mutex (
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ex_release_mutex");
+
+
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/* The mutex must have been previously acquired in order to release it */
+
+	if (!obj_desc->mutex.owner_thread) {
+		ACPI_REPORT_ERROR (("Cannot release Mutex [%4.4s], not acquired\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_MUTEX_NOT_ACQUIRED);
+	}
+
+	/* Sanity check -- we must have a valid thread ID */
+
+	if (!walk_state->thread) {
+		ACPI_REPORT_ERROR (("Cannot release Mutex [%4.4s], null thread info\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_INTERNAL);
+	}
+
+	/*
+	 * The Mutex is owned, but this thread must be the owner.
+	 * Special case for Global Lock, any thread can release
+	 */
+	if ((obj_desc->mutex.owner_thread->thread_id != walk_state->thread->thread_id) &&
+		(obj_desc->mutex.semaphore != acpi_gbl_global_lock_semaphore)) {
+		ACPI_REPORT_ERROR ((
+			"Thread %X cannot release Mutex [%4.4s] acquired by thread %X\n",
+			walk_state->thread->thread_id,
+			acpi_ut_get_node_name (obj_desc->mutex.node),
+			obj_desc->mutex.owner_thread->thread_id));
+		return_ACPI_STATUS (AE_AML_NOT_OWNER);
+	}
+
+	/*
+	 * The sync level of the mutex must be less than or
+	 * equal to the current sync level
+	 */
+	if (obj_desc->mutex.sync_level > walk_state->thread->current_sync_level) {
+		ACPI_REPORT_ERROR (("Cannot release Mutex [%4.4s], incorrect sync_level\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_MUTEX_ORDER);
+	}
+
+	/* Match multiple Acquires with multiple Releases */
+
+	obj_desc->mutex.acquisition_depth--;
+	if (obj_desc->mutex.acquisition_depth != 0) {
+		/* Just decrement the depth and return */
+
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Unlink the mutex from the owner's list */
+
+	acpi_ex_unlink_mutex (obj_desc);
+
+	/* Release the mutex */
+
+	status = acpi_ex_system_release_mutex (obj_desc);
+
+	/* Update the mutex and walk state, restore sync_level before acquire */
+
+	obj_desc->mutex.owner_thread = NULL;
+	walk_state->thread->current_sync_level = obj_desc->mutex.original_sync_level;
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_release_all_mutexes
+ *
+ * PARAMETERS:  mutex_list            - Head of the mutex list
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Release all mutexes in the list
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_release_all_mutexes (
+	struct acpi_thread_state        *thread)
+{
+	union acpi_operand_object       *next = thread->acquired_mutex_list;
+	union acpi_operand_object       *this;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	/* Traverse the list of owned mutexes, releasing each one */
+
+	while (next) {
+		this = next;
+		next = this->mutex.next;
+
+		this->mutex.acquisition_depth = 1;
+		this->mutex.prev             = NULL;
+		this->mutex.next             = NULL;
+
+		 /* Release the mutex */
+
+		status = acpi_ex_system_release_mutex (this);
+		if (ACPI_FAILURE (status)) {
+			continue;
+		}
+
+		/* Mark mutex unowned */
+
+		this->mutex.owner_thread = NULL;
+
+		/* Update Thread sync_level (Last mutex is the important one) */
+
+		thread->current_sync_level = this->mutex.original_sync_level;
+	}
+}
+
+