Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
new file mode 100644
index 0000000..7a3b18f
--- /dev/null
+++ b/arch/sh/kernel/cf-enabler.c
@@ -0,0 +1,158 @@
+/* $Id: cf-enabler.c,v 1.4 2004/02/22 22:44:36 kkojima Exp $
+ *
+ * linux/drivers/block/cf-enabler.c
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2000 Toshiharu Nozawa
+ * Copyright (C) 2001 A&D Co., Ltd.
+ *
+ * Enable the CF configuration.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/*
+ * You can connect Compact Flash directly to the bus of SuperH.
+ * This is the enabler for that.
+ *
+ * SIM: How generic is this really? It looks pretty board, or at
+ * least SH sub-type, specific to me.
+ * I know it doesn't work on the Overdrive!
+ */
+
+/*
+ * 0xB8000000 : Attribute
+ * 0xB8001000 : Common Memory
+ * 0xBA000000 : I/O
+ */
+#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
+/* SH4 can't access PCMCIA interface through P2 area.
+ * we must remap it with appropreate attribute bit of the page set.
+ * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+
+#if defined(CONFIG_CF_AREA6)
+#define slot_no 0
+#else
+#define slot_no 1
+#endif
+
+/* defined in mm/ioremap.c */
+extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags);
+
+/* use this pointer to access to directly connected compact flash io area*/
+void *cf_io_base;
+
+static int __init allocate_cf_area(void)
+{
+ pgprot_t prot;
+ unsigned long paddrbase, psize;
+
+ /* open I/O area window */
+ paddrbase = virt_to_phys((void*)CONFIG_CF_BASE_ADDR);
+ psize = PAGE_SIZE;
+ prot = PAGE_KERNEL_PCC(slot_no, _PAGE_PCC_IO16);
+ cf_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+ if (!cf_io_base) {
+ printk("allocate_cf_area : can't open CF I/O window!\n");
+ return -ENOMEM;
+ }
+/* printk("p3_ioremap(paddr=0x%08lx, psize=0x%08lx, prot=0x%08lx)=0x%08lx\n",
+ paddrbase, psize, prot.pgprot, cf_io_base);*/
+
+ /* XXX : do we need attribute and common-memory area also? */
+
+ return 0;
+}
+#endif
+
+static int __init cf_init_default(void)
+{
+/* You must have enabled the card, and set the level interrupt
+ * before reaching this point. Possibly in boot ROM or boot loader.
+ */
+#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
+ allocate_cf_area();
+#endif
+#if defined(CONFIG_SH_UNKNOWN)
+ /* This should be done in each board's init_xxx_irq. */
+ make_imask_irq(14);
+ disable_irq(14);
+#endif
+ return 0;
+}
+
+#if defined(CONFIG_SH_SOLUTION_ENGINE)
+#include <asm/se/se.h>
+
+/*
+ * SolutionEngine
+ *
+ * 0xB8400000 : Common Memory
+ * 0xB8500000 : Attribute
+ * 0xB8600000 : I/O
+ */
+
+static int __init cf_init_se(void)
+{
+ if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
+ return 0; /* Not detected */
+
+ if ((ctrl_inw(MRSHPC_CSR) & 0x0080) == 0) {
+ ctrl_outw(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */
+ } else {
+ ctrl_outw(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */
+ }
+
+ /*
+ * PC-Card window open
+ * flag == COMMON/ATTRIBUTE/IO
+ */
+ /* common window open */
+ ctrl_outw(0x8a84, MRSHPC_MW0CR1);/* window 0xb8400000 */
+ if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
+ /* common mode & bus width 16bit SWAP = 1*/
+ ctrl_outw(0x0b00, MRSHPC_MW0CR2);
+ else
+ /* common mode & bus width 16bit SWAP = 0*/
+ ctrl_outw(0x0300, MRSHPC_MW0CR2);
+
+ /* attribute window open */
+ ctrl_outw(0x8a85, MRSHPC_MW1CR1);/* window 0xb8500000 */
+ if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
+ /* attribute mode & bus width 16bit SWAP = 1*/
+ ctrl_outw(0x0a00, MRSHPC_MW1CR2);
+ else
+ /* attribute mode & bus width 16bit SWAP = 0*/
+ ctrl_outw(0x0200, MRSHPC_MW1CR2);
+
+ /* I/O window open */
+ ctrl_outw(0x8a86, MRSHPC_IOWCR1);/* I/O window 0xb8600000 */
+ ctrl_outw(0x0008, MRSHPC_CDCR); /* I/O card mode */
+ if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
+ ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
+ else
+ ctrl_outw(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/
+
+ ctrl_outw(0x2000, MRSHPC_ICR);
+ ctrl_outb(0x00, PA_MRSHPC_MW2 + 0x206);
+ ctrl_outb(0x42, PA_MRSHPC_MW2 + 0x200);
+ return 0;
+}
+#endif
+
+int __init cf_init(void)
+{
+#if defined(CONFIG_SH_SOLUTION_ENGINE)
+ if (MACH_SE)
+ return cf_init_se();
+#endif
+ return cf_init_default();
+}
+
+__initcall (cf_init);
