Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
new file mode 100644
index 0000000..f3cac43
--- /dev/null
+++ b/arch/arm/mach-pxa/irq.c
@@ -0,0 +1,313 @@
+/*
+ * linux/arch/arm/mach-pxa/irq.c
+ *
+ * Generic PXA IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/pxa-regs.h>
+
+#include "generic.h"
+
+
+/*
+ * This is for peripheral IRQs internal to the PXA chip.
+ */
+
+static void pxa_mask_low_irq(unsigned int irq)
+{
+ ICMR &= ~(1 << (irq + PXA_IRQ_SKIP));
+}
+
+static void pxa_unmask_low_irq(unsigned int irq)
+{
+ ICMR |= (1 << (irq + PXA_IRQ_SKIP));
+}
+
+static struct irqchip pxa_internal_chip_low = {
+ .ack = pxa_mask_low_irq,
+ .mask = pxa_mask_low_irq,
+ .unmask = pxa_unmask_low_irq,
+};
+
+#if PXA_INTERNAL_IRQS > 32
+
+/*
+ * This is for the second set of internal IRQs as found on the PXA27x.
+ */
+
+static void pxa_mask_high_irq(unsigned int irq)
+{
+ ICMR2 &= ~(1 << (irq - 32 + PXA_IRQ_SKIP));
+}
+
+static void pxa_unmask_high_irq(unsigned int irq)
+{
+ ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP));
+}
+
+static struct irqchip pxa_internal_chip_high = {
+ .ack = pxa_mask_high_irq,
+ .mask = pxa_mask_high_irq,
+ .unmask = pxa_unmask_high_irq,
+};
+
+#endif
+
+/*
+ * PXA GPIO edge detection for IRQs:
+ * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+ * Use this instead of directly setting GRER/GFER.
+ */
+
+static long GPIO_IRQ_rising_edge[4];
+static long GPIO_IRQ_falling_edge[4];
+static long GPIO_IRQ_mask[4];
+
+static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+ int gpio, idx;
+
+ gpio = IRQ_TO_GPIO(irq);
+ idx = gpio >> 5;
+
+ if (type == IRQT_PROBE) {
+ /* Don't mess with enabled GPIOs using preconfigured edges or
+ GPIOs set to alternate function during probe */
+ if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
+ GPIO_bit(gpio))
+ return 0;
+ if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
+ return 0;
+ type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+ }
+
+ /* printk(KERN_DEBUG "IRQ%d (GPIO%d): ", irq, gpio); */
+
+ pxa_gpio_mode(gpio | GPIO_IN);
+
+ if (type & __IRQT_RISEDGE) {
+ /* printk("rising "); */
+ __set_bit (gpio, GPIO_IRQ_rising_edge);
+ } else
+ __clear_bit (gpio, GPIO_IRQ_rising_edge);
+
+ if (type & __IRQT_FALEDGE) {
+ /* printk("falling "); */
+ __set_bit (gpio, GPIO_IRQ_falling_edge);
+ } else
+ __clear_bit (gpio, GPIO_IRQ_falling_edge);
+
+ /* printk("edges\n"); */
+
+ GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
+ GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
+ return 0;
+}
+
+/*
+ * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1.
+ */
+
+static void pxa_ack_low_gpio(unsigned int irq)
+{
+ GEDR0 = (1 << (irq - IRQ_GPIO0));
+}
+
+static struct irqchip pxa_low_gpio_chip = {
+ .ack = pxa_ack_low_gpio,
+ .mask = pxa_mask_low_irq,
+ .unmask = pxa_unmask_low_irq,
+ .type = pxa_gpio_irq_type,
+};
+
+/*
+ * Demux handler for GPIO>=2 edge detect interrupts
+ */
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irqdesc *desc,
+ struct pt_regs *regs)
+{
+ unsigned int mask;
+ int loop;
+
+ do {
+ loop = 0;
+
+ mask = GEDR0 & ~3;
+ if (mask) {
+ GEDR0 = mask;
+ irq = IRQ_GPIO(2);
+ desc = irq_desc + irq;
+ mask >>= 2;
+ do {
+ if (mask & 1)
+ desc->handle(irq, desc, regs);
+ irq++;
+ desc++;
+ mask >>= 1;
+ } while (mask);
+ loop = 1;
+ }
+
+ mask = GEDR1;
+ if (mask) {
+ GEDR1 = mask;
+ irq = IRQ_GPIO(32);
+ desc = irq_desc + irq;
+ do {
+ if (mask & 1)
+ desc->handle(irq, desc, regs);
+ irq++;
+ desc++;
+ mask >>= 1;
+ } while (mask);
+ loop = 1;
+ }
+
+ mask = GEDR2;
+ if (mask) {
+ GEDR2 = mask;
+ irq = IRQ_GPIO(64);
+ desc = irq_desc + irq;
+ do {
+ if (mask & 1)
+ desc->handle(irq, desc, regs);
+ irq++;
+ desc++;
+ mask >>= 1;
+ } while (mask);
+ loop = 1;
+ }
+
+#if PXA_LAST_GPIO >= 96
+ mask = GEDR3;
+ if (mask) {
+ GEDR3 = mask;
+ irq = IRQ_GPIO(96);
+ desc = irq_desc + irq;
+ do {
+ if (mask & 1)
+ desc->handle(irq, desc, regs);
+ irq++;
+ desc++;
+ mask >>= 1;
+ } while (mask);
+ loop = 1;
+ }
+#endif
+ } while (loop);
+}
+
+static void pxa_ack_muxed_gpio(unsigned int irq)
+{
+ int gpio = irq - IRQ_GPIO(2) + 2;
+ GEDR(gpio) = GPIO_bit(gpio);
+}
+
+static void pxa_mask_muxed_gpio(unsigned int irq)
+{
+ int gpio = irq - IRQ_GPIO(2) + 2;
+ __clear_bit(gpio, GPIO_IRQ_mask);
+ GRER(gpio) &= ~GPIO_bit(gpio);
+ GFER(gpio) &= ~GPIO_bit(gpio);
+}
+
+static void pxa_unmask_muxed_gpio(unsigned int irq)
+{
+ int gpio = irq - IRQ_GPIO(2) + 2;
+ int idx = gpio >> 5;
+ __set_bit(gpio, GPIO_IRQ_mask);
+ GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
+ GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
+}
+
+static struct irqchip pxa_muxed_gpio_chip = {
+ .ack = pxa_ack_muxed_gpio,
+ .mask = pxa_mask_muxed_gpio,
+ .unmask = pxa_unmask_muxed_gpio,
+ .type = pxa_gpio_irq_type,
+};
+
+
+void __init pxa_init_irq(void)
+{
+ int irq;
+
+ /* disable all IRQs */
+ ICMR = 0;
+
+ /* all IRQs are IRQ, not FIQ */
+ ICLR = 0;
+
+ /* clear all GPIO edge detects */
+ GFER0 = 0;
+ GFER1 = 0;
+ GFER2 = 0;
+ GRER0 = 0;
+ GRER1 = 0;
+ GRER2 = 0;
+ GEDR0 = GEDR0;
+ GEDR1 = GEDR1;
+ GEDR2 = GEDR2;
+
+#ifdef CONFIG_PXA27x
+ /* And similarly for the extra regs on the PXA27x */
+ ICMR2 = 0;
+ ICLR2 = 0;
+ GFER3 = 0;
+ GRER3 = 0;
+ GEDR3 = GEDR3;
+#endif
+
+ /* only unmasked interrupts kick us out of idle */
+ ICCR = 1;
+
+ /* GPIO 0 and 1 must have their mask bit always set */
+ GPIO_IRQ_mask[0] = 3;
+
+ for (irq = PXA_IRQ(PXA_IRQ_SKIP); irq <= PXA_IRQ(31); irq++) {
+ set_irq_chip(irq, &pxa_internal_chip_low);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+#if PXA_INTERNAL_IRQS > 32
+ for (irq = PXA_IRQ(32); irq < PXA_IRQ(PXA_INTERNAL_IRQS); irq++) {
+ set_irq_chip(irq, &pxa_internal_chip_high);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+#endif
+
+ for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
+ set_irq_chip(irq, &pxa_low_gpio_chip);
+ set_irq_handler(irq, do_edge_IRQ);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(PXA_LAST_GPIO); irq++) {
+ set_irq_chip(irq, &pxa_muxed_gpio_chip);
+ set_irq_handler(irq, do_edge_IRQ);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ /* Install handler for GPIO>=2 edge detect interrupts */
+ set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
+ set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
+}
