USB: serial: reuse generic write urb and bulk-out buffer
Reuse first write urb and bulk-out buffer of the generic write
implementation for drivers that rely on port->write_urb rather than
allocating them separately.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cc274fd..bfbe6e5 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -563,7 +563,6 @@
int i;
usb_kill_urb(port->read_urb);
- usb_kill_urb(port->write_urb);
for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
usb_kill_urb(port->write_urbs[i]);
/*
@@ -596,7 +595,6 @@
cancel_work_sync(&port->work);
usb_free_urb(port->read_urb);
- usb_free_urb(port->write_urb);
usb_free_urb(port->interrupt_in_urb);
usb_free_urb(port->interrupt_out_urb);
for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
@@ -605,7 +603,6 @@
}
kfifo_free(&port->write_fifo);
kfree(port->bulk_in_buffer);
- kfree(port->bulk_out_buffer);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
kfree(port);
@@ -933,11 +930,6 @@
endpoint = bulk_out_endpoint[i];
port = serial->port[i];
- port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!port->write_urb) {
- dev_err(&interface->dev, "No free urbs available\n");
- goto probe_error;
- }
if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
goto probe_error;
buffer_size = serial->type->bulk_out_size;
@@ -945,17 +937,7 @@
buffer_size = usb_endpoint_maxp(endpoint);
port->bulk_out_size = buffer_size;
port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
- port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!port->bulk_out_buffer) {
- dev_err(&interface->dev,
- "Couldn't allocate bulk_out_buffer\n");
- goto probe_error;
- }
- usb_fill_bulk_urb(port->write_urb, dev,
- usb_sndbulkpipe(dev,
- endpoint->bEndpointAddress),
- port->bulk_out_buffer, buffer_size,
- serial->type->write_bulk_callback, port);
+
for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
set_bit(j, &port->write_urbs_free);
port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
@@ -978,6 +960,9 @@
serial->type->write_bulk_callback,
port);
}
+
+ port->write_urb = port->write_urbs[0];
+ port->bulk_out_buffer = port->bulk_out_buffers[0];
}
if (serial->type->read_int_callback) {
