genirq: Remove __do_IRQ
All architectures are finally converted. Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 8c594c4..b959659 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -357,14 +357,6 @@
-----------------------------
-What: __do_IRQ all in one fits nothing interrupt handler
-When: 2.6.32
-Why: __do_IRQ was kept for easy migration to the type flow handlers.
- More than two years of migration time is enough.
-Who: Thomas Gleixner <tglx@linutronix.de>
-
------------------------------
-
What: fakephp and associated sysfs files in /sys/bus/pci/slots/
When: 2011
Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index fc95ee1..943fe69 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -68,9 +68,6 @@
bool
default n
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
config GENERIC_HARDIRQS
bool
default y
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 0a221d4..a37b2be 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -50,9 +50,6 @@
config GENERIC_IRQ_PROBE
def_bool y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
config GENERIC_GPIO
def_bool y
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index f6bcb03..e504ede 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -33,10 +33,6 @@
bool
default y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- bool
- default y
-
config TIME_LOW_RES
bool
default y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index e0f5b6d..be1faf9 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -684,9 +684,6 @@
config GENERIC_HARDIRQS
def_bool y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
config GENERIC_IRQ_PROBE
bool
default y
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 704e7b9..7379cb0 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -52,10 +52,6 @@
bool
default y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- bool
- default y
-
config GENERIC_CALIBRATE_DELAY
bool
default y
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 5f5018a..5a63784 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -52,9 +52,6 @@
config GENERIC_CLOCKEVENTS
def_bool y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
config GENERIC_GPIO
def_bool y
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 548e6cc..f5ecc05 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -793,9 +793,6 @@
bool
default y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
#
# Select some configuration options automatically based on user selections.
#
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 8ed41cf..4638269 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -34,9 +34,6 @@
config RWSEM_XCHGADD_ALGORITHM
bool
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
config GENERIC_CALIBRATE_DELAY
def_bool y
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 0888675..4b94ac4 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -12,7 +12,6 @@
select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select GENERIC_ATOMIC64 if !64BIT
- select GENERIC_HARDIRQS_NO__DO_IRQ
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
@@ -79,9 +78,6 @@
bool
default y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
# unless you want to implement ACPI on PA-RISC ... ;-)
config PM
bool
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 959f38c..e0b185d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -40,10 +40,6 @@
bool
default y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- bool
- default y
-
config HAVE_SETUP_PER_CPU_AREA
def_bool PPC64
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index 4293fdcb..4f159ac 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -53,9 +53,6 @@
config SCHED_NO_NO_OMIT_FRAME_POINTER
def_bool y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
config GENERIC_SYSCALL_TABLE
def_bool y
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 45d9c87..989bb64 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -107,10 +107,6 @@
config NEED_PER_CPU_PAGE_FIRST_CHUNK
def_bool y if SPARC64
-config GENERIC_HARDIRQS_NO__DO_IRQ
- bool
- def_bool y if SPARC64
-
config MMU
bool
default y
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 4e8b82b..c16b98c 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -10,9 +10,6 @@
config GENERIC_HARDIRQS
def_bool y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
config GENERIC_IRQ_PROBE
def_bool y
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
index f8d1d0d..90a438a 100644
--- a/arch/um/Kconfig.um
+++ b/arch/um/Kconfig.um
@@ -120,9 +120,6 @@
If you don't know what to do, say N.
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index 6a64c6f..c1a95b7 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -101,13 +101,6 @@
#define get_irq_desc_msi(desc) ((desc)->irq_data.msi_desc)
/*
- * Monolithic do_IRQ implementation.
- */
-#ifndef CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ
-extern unsigned int __do_IRQ(unsigned int irq);
-#endif
-
-/*
* Architectures call this to let the generic IRQ layer
* handle an interrupt. If the descriptor is attached to an
* irqchip-style controller then we call the ->handle_irq() handler,
@@ -115,14 +108,7 @@
*/
static inline void generic_handle_irq_desc(unsigned int irq, struct irq_desc *desc)
{
-#ifdef CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ
desc->handle_irq(irq, desc);
-#else
- if (likely(desc->handle_irq))
- desc->handle_irq(irq, desc);
- else
- __do_IRQ(irq);
-#endif
}
static inline void generic_handle_irq(unsigned int irq)
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 31d766b..8e42fec 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -9,9 +9,6 @@
config GENERIC_HARDIRQS
def_bool y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
# Select this to disable the deprecated stuff
config GENERIC_HARDIRQS_NO_DEPRECATED
def_bool n
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index e2347eb..3540a71 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -118,114 +118,3 @@
return retval;
}
-
-#ifndef CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ
-
-#ifdef CONFIG_ENABLE_WARN_DEPRECATED
-# warning __do_IRQ is deprecated. Please convert to proper flow handlers
-#endif
-
-/**
- * __do_IRQ - original all in one highlevel IRQ handler
- * @irq: the interrupt number
- *
- * __do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- *
- * This is the original x86 implementation which is used for every
- * interrupt type.
- */
-unsigned int __do_IRQ(unsigned int irq)
-{
- struct irq_desc *desc = irq_to_desc(irq);
- struct irqaction *action;
- unsigned int status;
-
- kstat_incr_irqs_this_cpu(irq, desc);
-
- if (CHECK_IRQ_PER_CPU(desc->status)) {
- irqreturn_t action_ret;
-
- /*
- * No locking required for CPU-local interrupts:
- */
- if (desc->irq_data.chip->ack)
- desc->irq_data.chip->ack(irq);
- if (likely(!(desc->status & IRQ_DISABLED))) {
- action_ret = handle_IRQ_event(irq, desc->action);
- if (!noirqdebug)
- note_interrupt(irq, desc, action_ret);
- }
- desc->irq_data.chip->end(irq);
- return 1;
- }
-
- raw_spin_lock(&desc->lock);
- if (desc->irq_data.chip->ack)
- desc->irq_data.chip->ack(irq);
- /*
- * REPLAY is when Linux resends an IRQ that was dropped earlier
- * WAITING is used by probe to mark irqs that are being tested
- */
- status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
- status |= IRQ_PENDING; /* we _want_ to handle it */
-
- /*
- * If the IRQ is disabled for whatever reason, we cannot
- * use the action we have.
- */
- action = NULL;
- if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
- action = desc->action;
- status &= ~IRQ_PENDING; /* we commit to handling */
- status |= IRQ_INPROGRESS; /* we are handling it */
- }
- desc->status = status;
-
- /*
- * If there is no IRQ handler or it was disabled, exit early.
- * Since we set PENDING, if another processor is handling
- * a different instance of this same irq, the other processor
- * will take care of it.
- */
- if (unlikely(!action))
- goto out;
-
- /*
- * Edge triggered interrupts need to remember
- * pending events.
- * This applies to any hw interrupts that allow a second
- * instance of the same irq to arrive while we are in do_IRQ
- * or in the handler. But the code here only handles the _second_
- * instance of the irq, not the third or fourth. So it is mostly
- * useful for irq hardware that does not mask cleanly in an
- * SMP environment.
- */
- for (;;) {
- irqreturn_t action_ret;
-
- raw_spin_unlock(&desc->lock);
-
- action_ret = handle_IRQ_event(irq, action);
- if (!noirqdebug)
- note_interrupt(irq, desc, action_ret);
-
- raw_spin_lock(&desc->lock);
- if (likely(!(desc->status & IRQ_PENDING)))
- break;
- desc->status &= ~IRQ_PENDING;
- }
- desc->status &= ~IRQ_INPROGRESS;
-
-out:
- /*
- * The ->end() handler has to deal with interrupts which got
- * disabled while the handler was running.
- */
- desc->irq_data.chip->end(irq);
- raw_spin_unlock(&desc->lock);
-
- return 1;
-}
-#endif
