diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index d96751c..4d775ae 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -236,16 +236,8 @@
 	/* see if any padding is done by the hw and remove it */
 	hdr = (struct ieee80211_hdr *) skb->data;
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-	padpos = 24;
 	fc = hdr->frame_control;
-	if ((fc & cpu_to_le16(IEEE80211_FCTL_FROMDS|IEEE80211_FCTL_TODS)) ==
-	    cpu_to_le16(IEEE80211_FCTL_FROMDS|IEEE80211_FCTL_TODS)) {
-	  padpos += 6; /* ETH_ALEN */
-	}
-	if ((fc & cpu_to_le16(IEEE80211_STYPE_QOS_DATA|IEEE80211_FCTL_FTYPE)) ==
-	    cpu_to_le16(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) {
-	  padpos += 2;
-	}
+	padpos = ath9k_cmn_padpos(hdr->frame_control);
 
 	/* The MAC header is padded to have 32-bit boundary if the
 	 * packet payload is non-zero. The general calculation for
@@ -280,6 +272,20 @@
 }
 EXPORT_SYMBOL(ath9k_cmn_rx_skb_postprocess);
 
+int ath9k_cmn_padpos(__le16 frame_control)
+{
+	int padpos = 24;
+	if (ieee80211_has_a4(frame_control)) {
+		padpos += ETH_ALEN;
+	}
+	if (ieee80211_is_data_qos(frame_control)) {
+		padpos += IEEE80211_QOS_CTL_LEN;
+	}
+
+	return padpos;
+}
+EXPORT_SYMBOL(ath9k_cmn_padpos);
+
 static int __init ath9k_cmn_init(void)
 {
 	return 0;
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index b230bb1..042999c 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -123,3 +123,5 @@
 				  struct ath_rx_status *rx_stats,
 				  struct ieee80211_rx_status *rxs,
 				  bool decrypt_error);
+
+int ath9k_cmn_padpos(__le16 frame_control);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 55c6696..cfe710b 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2364,7 +2364,8 @@
 	struct ath_softc *sc = aphy->sc;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_tx_control txctl;
-	int hdrlen, padsize;
+	int padpos, padsize;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 
 	if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
 		ath_print(common, ATH_DBG_XMIT,
@@ -2374,7 +2375,6 @@
 	}
 
 	if (sc->ps_enabled) {
-		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 		/*
 		 * mac80211 does not set PM field for normal data frames, so we
 		 * need to update that based on the current PS mode.
@@ -2394,7 +2394,6 @@
 		 * power save mode. Need to wake up hardware for the TX to be
 		 * completed and if needed, also for RX of buffered frames.
 		 */
-		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 		ath9k_ps_wakeup(sc);
 		ath9k_hw_setrxabort(sc->sc_ah, 0);
 		if (ieee80211_is_pspoll(hdr->frame_control)) {
@@ -2422,7 +2421,6 @@
 	 * BSSes.
 	 */
 	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
 			sc->tx.seq_no += 0x10;
 		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
@@ -2430,13 +2428,13 @@
 	}
 
 	/* Add the padding after the header if this is not already done */
-	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-	if (hdrlen & 3) {
-		padsize = hdrlen % 4;
+	padpos = ath9k_cmn_padpos(hdr->frame_control);
+	padsize = padpos & 3;
+	if (padsize && skb->len>padpos) {
 		if (skb_headroom(skb) < padsize)
 			return -1;
 		skb_push(skb, padsize);
-		memmove(skb->data, skb->data + padsize, hdrlen);
+		memmove(skb->data, skb->data + padsize, padpos);
 	}
 
 	/* Check if a tx queue is available */
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 6f91a8a..564c6cb 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1596,6 +1596,7 @@
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	int hdrlen;
 	__le16 fc;
+	int padpos, padsize;
 
 	tx_info->pad[0] = 0;
 	switch (txctl->frame_type) {
@@ -1614,7 +1615,13 @@
 	ATH_TXBUF_RESET(bf);
 
 	bf->aphy = aphy;
-	bf->bf_frmlen = skb->len + FCS_LEN - (hdrlen & 3);
+	bf->bf_frmlen = skb->len + FCS_LEN;
+	/* Remove the padding size from bf_frmlen, if any */
+	padpos = ath9k_cmn_padpos(hdr->frame_control);
+	padsize = padpos & 3;
+	if (padsize && skb->len>padpos+padsize) {
+		bf->bf_frmlen -= padsize;
+	}
 
 	if (conf_is_ht(&hw->conf) && !is_pae(skb))
 		bf->bf_state.bf_type |= BUF_HT;