x86/PCI: use dev_printk when possible
Convert printks to use dev_printk().
I converted DBG() to dev_dbg(). This DBG() is from arch/x86/pci/pci.h and
requires source-code modification to enable, so dev_dbg() seems roughly
equivalent.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index ff3a6a3..4bdaa59 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -23,7 +23,8 @@
pci_read_config_byte(d, reg++, &busno);
pci_read_config_byte(d, reg++, &suba);
pci_read_config_byte(d, reg++, &subb);
- DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+ dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+ suba, subb);
if (busno)
pci_scan_bus_with_sysdata(busno); /* Bus A */
if (suba < subb)
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index a095058..5807d1b 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -128,10 +128,8 @@
pr = pci_find_parent_resource(dev, r);
if (!r->start || !pr ||
request_resource(pr, r) < 0) {
- printk(KERN_ERR "PCI: Cannot allocate "
- "resource region %d "
- "of bridge %s\n",
- idx, pci_name(dev));
+ dev_err(&dev->dev, "BAR %d: can't "
+ "allocate resource\n", idx);
/*
* Something is wrong with the region.
* Invalidate the resource to prevent
@@ -166,15 +164,15 @@
else
disabled = !(command & PCI_COMMAND_MEMORY);
if (pass == disabled) {
- DBG("PCI: Resource %08lx-%08lx "
- "(f=%lx, d=%d, p=%d)\n",
- r->start, r->end, r->flags, disabled, pass);
+ dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
+ "(f=%lx, d=%d, p=%d)\n",
+ (unsigned long long) r->start,
+ (unsigned long long) r->end,
+ r->flags, disabled, pass);
pr = pci_find_parent_resource(dev, r);
if (!pr || request_resource(pr, r) < 0) {
- printk(KERN_ERR "PCI: Cannot allocate "
- "resource region %d "
- "of device %s\n",
- idx, pci_name(dev));
+ dev_err(&dev->dev, "BAR %d: can't "
+ "allocate resource\n", idx);
/* We'll assign a new address later */
r->end -= r->start;
r->start = 0;
@@ -187,8 +185,7 @@
/* Turn the ROM off, leave the resource region,
* but keep it unregistered. */
u32 reg;
- DBG("PCI: Switching off ROM of %s\n",
- pci_name(dev));
+ dev_dbg(&dev->dev, "disabling ROM\n");
r->flags &= ~IORESOURCE_ROM_ENABLE;
pci_read_config_dword(dev,
dev->rom_base_reg, ®);
@@ -257,8 +254,7 @@
lat = pcibios_max_latency;
else
return;
- printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
- pci_name(dev), lat);
+ dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 6a06a2e..fec0123 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -436,7 +436,7 @@
{
WARN_ON_ONCE(pirq >= 9);
if (pirq > 8) {
- printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+ dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
return 0;
}
return read_config_nybble(router, 0x74, pirq-1);
@@ -446,7 +446,7 @@
{
WARN_ON_ONCE(pirq >= 9);
if (pirq > 8) {
- printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+ dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
return 0;
}
write_config_nybble(router, 0x74, pirq-1, irq);
@@ -492,15 +492,17 @@
irq = 0;
if (pirq <= 4)
irq = read_config_nybble(router, 0x56, pirq - 1);
- printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
- dev->vendor, dev->device, pirq, irq);
+ dev_info(&dev->dev,
+ "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
+ dev->vendor, dev->device, pirq, irq);
return irq;
}
static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
- printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
- dev->vendor, dev->device, pirq, irq);
+ dev_info(&dev->dev,
+ "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
+ dev->vendor, dev->device, pirq, irq);
if (pirq <= 4)
write_config_nybble(router, 0x56, pirq - 1, irq);
return 1;
@@ -730,7 +732,6 @@
switch (device) {
case PCI_DEVICE_ID_AL_M1533:
case PCI_DEVICE_ID_AL_M1563:
- printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
r->name = "ALI";
r->get = pirq_ali_get;
r->set = pirq_ali_set;
@@ -840,11 +841,9 @@
h->probe(r, pirq_router_dev, pirq_router_dev->device))
break;
}
- printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
- pirq_router.name,
- pirq_router_dev->vendor,
- pirq_router_dev->device,
- pci_name(pirq_router_dev));
+ dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+ pirq_router.name,
+ pirq_router_dev->vendor, pirq_router_dev->device);
/* The device remains referenced for the kernel lifetime */
}
@@ -877,7 +876,7 @@
/* Find IRQ pin */
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin) {
- DBG(KERN_DEBUG " -> no interrupt pin\n");
+ dev_dbg(&dev->dev, "no interrupt pin\n");
return 0;
}
pin = pin - 1;
@@ -887,20 +886,20 @@
if (!pirq_table)
return 0;
- DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
info = pirq_get_info(dev);
if (!info) {
- DBG(" -> not found in routing table\n" KERN_DEBUG);
+ dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
+ 'A' + pin);
return 0;
}
pirq = info->irq[pin].link;
mask = info->irq[pin].bitmap;
if (!pirq) {
- DBG(" -> not routed\n" KERN_DEBUG);
+ dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin);
return 0;
}
- DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
- pirq_table->exclusive_irqs);
+ dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
+ 'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
mask &= pcibios_irq_mask;
/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -930,10 +929,8 @@
if (pci_probe & PCI_USE_PIRQ_MASK)
newirq = 0;
else
- printk("\n" KERN_WARNING
- "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
- KERN_DEBUG, newirq,
- pci_name(dev));
+ dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+ "%#x; try pci=usepirqmask\n", newirq, mask);
}
if (!newirq && assign) {
for (i = 0; i < 16; i++) {
@@ -944,39 +941,35 @@
newirq = i;
}
}
- DBG(" -> newirq=%d", newirq);
+ dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq);
/* Check if it is hardcoded */
if ((pirq & 0xf0) == 0xf0) {
irq = pirq & 0xf;
- DBG(" -> hardcoded IRQ %d\n", irq);
- msg = "Hardcoded";
+ msg = "hardcoded";
} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
- DBG(" -> got IRQ %d\n", irq);
- msg = "Found";
+ msg = "found";
eisa_set_level_irq(irq);
} else if (newirq && r->set &&
(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
- DBG(" -> assigning IRQ %d", newirq);
if (r->set(pirq_router_dev, dev, pirq, newirq)) {
eisa_set_level_irq(newirq);
- DBG(" ... OK\n");
- msg = "Assigned";
+ msg = "assigned";
irq = newirq;
}
}
if (!irq) {
- DBG(" ... failed\n");
if (newirq && mask == (1 << newirq)) {
- msg = "Guessed";
+ msg = "guessed";
irq = newirq;
- } else
+ } else {
+ dev_dbg(&dev->dev, "can't route interrupt\n");
return 0;
+ }
}
- printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
- pci_name(dev));
+ dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq);
/* Update IRQ for all devices with the same pirq value */
while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -996,17 +989,17 @@
(!(pci_probe & PCI_USE_PIRQ_MASK) || \
((1 << dev2->irq) & mask))) {
#ifndef CONFIG_PCI_MSI
- printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
- pci_name(dev2), dev2->irq, irq);
+ dev_info(&dev2->dev, "IRQ routing conflict: "
+ "have IRQ %d, want IRQ %d\n",
+ dev2->irq, irq);
#endif
continue;
}
dev2->irq = irq;
pirq_penalty[irq]++;
if (dev != dev2)
- printk(KERN_INFO
- "PCI: Sharing IRQ %d with %s\n",
- irq, pci_name(dev2));
+ dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+ irq, pci_name(dev2));
}
}
return 1;
@@ -1025,8 +1018,7 @@
* already in use.
*/
if (dev->irq >= 16) {
- DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
- pci_name(dev), dev->irq);
+ dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
dev->irq = 0;
}
/*
@@ -1070,12 +1062,12 @@
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
- printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
- pci_name(bridge), 'A' + pin, irq);
+ dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
+ pci_name(bridge),
+ 'A' + pin, irq);
}
if (irq >= 0) {
- printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
- pci_name(dev), 'A' + pin, irq);
+ dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
dev->irq = irq;
}
}
@@ -1231,25 +1223,24 @@
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
- printk(KERN_WARNING
- "PCI: using PPB %s[%c] to get irq %d\n",
- pci_name(bridge),
- 'A' + pin, irq);
+ dev_warn(&dev->dev, "using bridge %s "
+ "INT %c to get IRQ %d\n",
+ pci_name(bridge), 'A' + pin,
+ irq);
dev = bridge;
}
dev = temp_dev;
if (irq >= 0) {
- printk(KERN_INFO
- "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
- pci_name(dev), 'A' + pin, irq);
+ dev_info(&dev->dev, "PCI->APIC IRQ transform: "
+ "INT %c -> IRQ %d\n", 'A' + pin, irq);
dev->irq = irq;
return 0;
} else
- msg = " Probably buggy MP table.";
+ msg = "; probably buggy MP table";
} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
msg = "";
else
- msg = " Please try using pci=biosirq.";
+ msg = "; please try using pci=biosirq";
/*
* With IDE legacy devices the IRQ lookup failure is not
@@ -1259,9 +1250,8 @@
!(dev->class & 0x5))
return 0;
- printk(KERN_WARNING
- "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
- 'A' + pin, pci_name(dev), msg);
+ dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
+ 'A' + pin, msg);
}
return 0;
}
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index f4b16dc..1177845 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -131,13 +131,14 @@
u8 busno, suba, subb;
int quad = BUS2QUAD(d->bus->number);
- printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+ dev_info(&d->dev, "searching for i450NX host bridges\n");
reg = 0xd0;
for(pxb=0; pxb<2; pxb++) {
pci_read_config_byte(d, reg++, &busno);
pci_read_config_byte(d, reg++, &suba);
pci_read_config_byte(d, reg++, &subb);
- DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+ dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
+ pxb, busno, suba, subb);
if (busno) {
/* Bus A */
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
