/*
 *  mach-nomadik/include/mach/irqs.h
 *
 *  Copyright (C) ST Microelectronics
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H

#include <mach/hardware.h>

#define IRQ_VIC_START		32	/* first VIC interrupt is 1 */

/*
 * Interrupt numbers generic for all Nomadik Chip cuts
 */
#define IRQ_WATCHDOG			(IRQ_VIC_START+0)
#define IRQ_SOFTINT			(IRQ_VIC_START+1)
#define IRQ_CRYPTO			(IRQ_VIC_START+2)
#define IRQ_OWM				(IRQ_VIC_START+3)
#define IRQ_MTU0			(IRQ_VIC_START+4)
#define IRQ_MTU1			(IRQ_VIC_START+5)
#define IRQ_GPIO0			(IRQ_VIC_START+6)
#define IRQ_GPIO1			(IRQ_VIC_START+7)
#define IRQ_GPIO2			(IRQ_VIC_START+8)
#define IRQ_GPIO3			(IRQ_VIC_START+9)
#define IRQ_RTC_RTT			(IRQ_VIC_START+10)
#define IRQ_SSP				(IRQ_VIC_START+11)
#define IRQ_UART0			(IRQ_VIC_START+12)
#define IRQ_DMA1			(IRQ_VIC_START+13)
#define IRQ_CLCD_MDIF			(IRQ_VIC_START+14)
#define IRQ_DMA0			(IRQ_VIC_START+15)
#define IRQ_PWRFAIL			(IRQ_VIC_START+16)
#define IRQ_UART1			(IRQ_VIC_START+17)
#define IRQ_FIRDA			(IRQ_VIC_START+18)
#define IRQ_MSP0			(IRQ_VIC_START+19)
#define IRQ_I2C0			(IRQ_VIC_START+20)
#define IRQ_I2C1			(IRQ_VIC_START+21)
#define IRQ_SDMMC			(IRQ_VIC_START+22)
#define IRQ_USBOTG			(IRQ_VIC_START+23)
#define IRQ_SVA_IT0			(IRQ_VIC_START+24)
#define IRQ_SVA_IT1			(IRQ_VIC_START+25)
#define IRQ_SAA_IT0			(IRQ_VIC_START+26)
#define IRQ_SAA_IT1			(IRQ_VIC_START+27)
#define IRQ_UART2			(IRQ_VIC_START+28)
#define IRQ_MSP2			(IRQ_VIC_START+29)
#define IRQ_L2CC			(IRQ_VIC_START+30)
#define IRQ_HPI				(IRQ_VIC_START+31)
#define IRQ_SKE				(IRQ_VIC_START+32)
#define IRQ_KP				(IRQ_VIC_START+33)
#define IRQ_MEMST			(IRQ_VIC_START+34)
#define IRQ_SGA_IT			(IRQ_VIC_START+35)
#define IRQ_USBM			(IRQ_VIC_START+36)
#define IRQ_MSP1			(IRQ_VIC_START+37)

#define NOMADIK_GPIO_OFFSET		(IRQ_VIC_START+64)

/* After chip-specific IRQ numbers we have the GPIO ones */
#define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_GPIO_OFFSET)
#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_GPIO_OFFSET)
#define NOMADIK_NR_IRQS			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)

/* Following two are used by entry_macro.S, to access our dual-vic */
#define VIC_REG_IRQSR0		0
#define VIC_REG_IRQSR1		0x20

#endif /* __ASM_ARCH_IRQS_H */