/*
 *  linux/drivers/mmc/core/host.c
 *
 *  Copyright (C) 2003 Russell King, All Rights Reserved.
 *  Copyright (C) 2007-2008 Pierre Ossman
 *  Copyright (C) 2010 Linus Walleij
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 *  MMC host class device management
 */

#include <linux/device.h>
#include <linux/err.h>
#include <linux/idr.h>
#include <linux/pagemap.h>
#include <linux/export.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/suspend.h>

#include <linux/mmc/host.h>
#include <linux/mmc/card.h>

#include "core.h"
#include "host.h"

#define cls_dev_to_mmc_host(d)	container_of(d, struct mmc_host, class_dev)

static void mmc_host_classdev_release(struct device *dev)
{
	struct mmc_host *host = cls_dev_to_mmc_host(dev);
	kfree(host);
}

static struct class mmc_host_class = {
	.name		= "mmc_host",
	.dev_release	= mmc_host_classdev_release,
};

int mmc_register_host_class(void)
{
	return class_register(&mmc_host_class);
}

void mmc_unregister_host_class(void)
{
	class_unregister(&mmc_host_class);
}

static DEFINE_IDR(mmc_host_idr);
static DEFINE_SPINLOCK(mmc_host_lock);

#ifdef CONFIG_MMC_CLKGATE

/*
 * Enabling clock gating will make the core call out to the host
 * once up and once down when it performs a request or card operation
 * intermingled in any fashion. The driver will see this through
 * set_ios() operations with ios.clock field set to 0 to gate (disable)
 * the block clock, and to the old frequency to enable it again.
 */
static void mmc_host_clk_gate_delayed(struct mmc_host *host)
{
	unsigned long tick_ns;
	unsigned long freq = host->ios.clock;
	unsigned long flags;

	if (!freq) {
		pr_debug("%s: frequency set to 0 in disable function, "
			 "this means the clock is already disabled.\n",
			 mmc_hostname(host));
		return;
	}
	/*
	 * New requests may have appeared while we were scheduling,
	 * then there is no reason to delay the check before
	 * clk_disable().
	 */
	spin_lock_irqsave(&host->clk_lock, flags);

	/*
	 * Delay n bus cycles (at least 8 from MMC spec) before attempting
	 * to disable the MCI block clock. The reference count may have
	 * gone up again after this delay due to rescheduling!
	 */
	if (!host->clk_requests) {
		spin_unlock_irqrestore(&host->clk_lock, flags);
		tick_ns = DIV_ROUND_UP(1000000000, freq);
		ndelay(host->clk_delay * tick_ns);
	} else {
		/* New users appeared while waiting for this work */
		spin_unlock_irqrestore(&host->clk_lock, flags);
		return;
	}
	mutex_lock(&host->clk_gate_mutex);
	spin_lock_irqsave(&host->clk_lock, flags);
	if (!host->clk_requests) {
		spin_unlock_irqrestore(&host->clk_lock, flags);
		/* This will set host->ios.clock to 0 */
		mmc_gate_clock(host);
		spin_lock_irqsave(&host->clk_lock, flags);
		pr_debug("%s: gated MCI clock\n", mmc_hostname(host));
	}
	spin_unlock_irqrestore(&host->clk_lock, flags);
	mutex_unlock(&host->clk_gate_mutex);
}

/*
 * Internal work. Work to disable the clock at some later point.
 */
static void mmc_host_clk_gate_work(struct work_struct *work)
{
	struct mmc_host *host = container_of(work, struct mmc_host,
					      clk_gate_work);

	mmc_host_clk_gate_delayed(host);
}

/**
 *	mmc_host_clk_hold - ungate hardware MCI clocks
 *	@host: host to ungate.
 *
 *	Makes sure the host ios.clock is restored to a non-zero value
 *	past this call.	Increase clock reference count and ungate clock
 *	if we're the first user.
 */
void mmc_host_clk_hold(struct mmc_host *host)
{
	unsigned long flags;

	mutex_lock(&host->clk_gate_mutex);
	spin_lock_irqsave(&host->clk_lock, flags);
	if (host->clk_gated) {
		spin_unlock_irqrestore(&host->clk_lock, flags);
		mmc_ungate_clock(host);
		spin_lock_irqsave(&host->clk_lock, flags);
		pr_debug("%s: ungated MCI clock\n", mmc_hostname(host));
	}
	host->clk_requests++;
	spin_unlock_irqrestore(&host->clk_lock, flags);
	mutex_unlock(&host->clk_gate_mutex);
}

/**
 *	mmc_host_may_gate_card - check if this card may be gated
 *	@card: card to check.
 */
static bool mmc_host_may_gate_card(struct mmc_card *card)
{
	/* If there is no card we may gate it */
	if (!card)
		return true;
	/*
	 * Don't gate SDIO cards! These need to be clocked at all times
	 * since they may be independent systems generating interrupts
	 * and other events. The clock requests counter from the core will
	 * go down to zero since the core does not need it, but we will not
	 * gate the clock, because there is somebody out there that may still
	 * be using it.
	 */
	return !(card->quirks & MMC_QUIRK_BROKEN_CLK_GATING);
}

/**
 *	mmc_host_clk_release - gate off hardware MCI clocks
 *	@host: host to gate.
 *
 *	Calls the host driver with ios.clock set to zero as often as possible
 *	in order to gate off hardware MCI clocks. Decrease clock reference
 *	count and schedule disabling of clock.
 */
void mmc_host_clk_release(struct mmc_host *host)
{
	unsigned long flags;

	spin_lock_irqsave(&host->clk_lock, flags);
	host->clk_requests--;
	if (mmc_host_may_gate_card(host->card) &&
	    !host->clk_requests)
		queue_work(system_nrt_wq, &host->clk_gate_work);
	spin_unlock_irqrestore(&host->clk_lock, flags);
}

/**
 *	mmc_host_clk_rate - get current clock frequency setting
 *	@host: host to get the clock frequency for.
 *
 *	Returns current clock frequency regardless of gating.
 */
unsigned int mmc_host_clk_rate(struct mmc_host *host)
{
	unsigned long freq;
	unsigned long flags;

	spin_lock_irqsave(&host->clk_lock, flags);
	if (host->clk_gated)
		freq = host->clk_old;
	else
		freq = host->ios.clock;
	spin_unlock_irqrestore(&host->clk_lock, flags);
	return freq;
}

/**
 *	mmc_host_clk_init - set up clock gating code
 *	@host: host with potential clock to control
 */
static inline void mmc_host_clk_init(struct mmc_host *host)
{
	host->clk_requests = 0;
	/* Hold MCI clock for 8 cycles by default */
	host->clk_delay = 8;
	host->clk_gated = false;
	INIT_WORK(&host->clk_gate_work, mmc_host_clk_gate_work);
	spin_lock_init(&host->clk_lock);
	mutex_init(&host->clk_gate_mutex);
}

/**
 *	mmc_host_clk_exit - shut down clock gating code
 *	@host: host with potential clock to control
 */
static inline void mmc_host_clk_exit(struct mmc_host *host)
{
	/*
	 * Wait for any outstanding gate and then make sure we're
	 * ungated before exiting.
	 */
	if (cancel_work_sync(&host->clk_gate_work))
		mmc_host_clk_gate_delayed(host);
	if (host->clk_gated)
		mmc_host_clk_hold(host);
	/* There should be only one user now */
	WARN_ON(host->clk_requests > 1);
}

#else

static inline void mmc_host_clk_init(struct mmc_host *host)
{
}

static inline void mmc_host_clk_exit(struct mmc_host *host)
{
}

#endif

/**
 *	mmc_alloc_host - initialise the per-host structure.
 *	@extra: sizeof private data structure
 *	@dev: pointer to host device model structure
 *
 *	Initialise the per-host structure.
 */
struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
{
	int err;
	struct mmc_host *host;

	if (!idr_pre_get(&mmc_host_idr, GFP_KERNEL))
		return NULL;

	host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL);
	if (!host)
		return NULL;

	spin_lock(&mmc_host_lock);
	err = idr_get_new(&mmc_host_idr, host, &host->index);
	spin_unlock(&mmc_host_lock);
	if (err)
		goto free;

	dev_set_name(&host->class_dev, "mmc%d", host->index);

	host->parent = dev;
	host->class_dev.parent = dev;
	host->class_dev.class = &mmc_host_class;
	device_initialize(&host->class_dev);

	mmc_host_clk_init(host);

	spin_lock_init(&host->lock);
	init_waitqueue_head(&host->wq);
	INIT_DELAYED_WORK(&host->detect, mmc_rescan);
	INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable);
#ifdef CONFIG_PM
	host->pm_notify.notifier_call = mmc_pm_notify;
#endif

	/*
	 * By default, hosts do not support SGIO or large requests.
	 * They have to set these according to their abilities.
	 */
	host->max_segs = 1;
	host->max_seg_size = PAGE_CACHE_SIZE;

	host->max_req_size = PAGE_CACHE_SIZE;
	host->max_blk_size = 512;
	host->max_blk_count = PAGE_CACHE_SIZE / 512;

	/*
	 * Enable runtime power management by default. This flag was added due
	 * to runtime power management causing disruption for some users, but
	 * the power on/off code has been improved since then.
	 *
	 * We'll enable this flag by default as an experiment, and if no
	 * problems are reported, we will follow up later and remove the flag
	 * altogether.
	 */
	host->caps = MMC_CAP_POWER_OFF_CARD;

	return host;

free:
	kfree(host);
	return NULL;
}

EXPORT_SYMBOL(mmc_alloc_host);

/**
 *	mmc_add_host - initialise host hardware
 *	@host: mmc host
 *
 *	Register the host with the driver model. The host must be
 *	prepared to start servicing requests before this function
 *	completes.
 */
int mmc_add_host(struct mmc_host *host)
{
	int err;

	WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
		!host->ops->enable_sdio_irq);

	err = device_add(&host->class_dev);
	if (err)
		return err;

	led_trigger_register_simple(dev_name(&host->class_dev), &host->led);

#ifdef CONFIG_DEBUG_FS
	mmc_add_host_debugfs(host);
#endif

	mmc_start_host(host);
	register_pm_notifier(&host->pm_notify);

	return 0;
}

EXPORT_SYMBOL(mmc_add_host);

/**
 *	mmc_remove_host - remove host hardware
 *	@host: mmc host
 *
 *	Unregister and remove all cards associated with this host,
 *	and power down the MMC bus. No new requests will be issued
 *	after this function has returned.
 */
void mmc_remove_host(struct mmc_host *host)
{
	unregister_pm_notifier(&host->pm_notify);
	mmc_stop_host(host);

#ifdef CONFIG_DEBUG_FS
	mmc_remove_host_debugfs(host);
#endif

	device_del(&host->class_dev);

	led_trigger_unregister_simple(host->led);

	mmc_host_clk_exit(host);
}

EXPORT_SYMBOL(mmc_remove_host);

/**
 *	mmc_free_host - free the host structure
 *	@host: mmc host
 *
 *	Free the host once all references to it have been dropped.
 */
void mmc_free_host(struct mmc_host *host)
{
	spin_lock(&mmc_host_lock);
	idr_remove(&mmc_host_idr, host->index);
	spin_unlock(&mmc_host_lock);

	put_device(&host->class_dev);
}

EXPORT_SYMBOL(mmc_free_host);