ide: always auto-tune PIO in legacy VLB host drivers
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index d2756c9..90c65cf 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -202,7 +202,7 @@
.name = DRV_NAME,
.chipset = ide_ali14xx,
.port_ops = &ali14xx_port_ops,
- .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE,
+ .host_flags = IDE_HFLAG_NO_DMA,
.pio_mask = ATA_PIO4,
};
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index 581909a..af791a0 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -101,8 +101,7 @@
IDE_HFLAG_IO_32BIT |
/* disallow ->io_32bit changes */
IDE_HFLAG_NO_IO_32BIT |
- IDE_HFLAG_NO_DMA |
- IDE_HFLAG_NO_AUTOTUNE,
+ IDE_HFLAG_NO_DMA,
.pio_mask = ATA_PIO4,
};
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index d626c76..9c667a1 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -340,7 +340,6 @@
.port_ops = &ht6560b_port_ops,
.host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */
IDE_HFLAG_NO_DMA |
- IDE_HFLAG_NO_AUTOTUNE |
IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO4,
};
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 87cef68..6424af1 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -12,8 +12,6 @@
* QDI QD6500/QD6580 EIDE controller fast support
*
* To activate controller support, use "ide0=qd65xx"
- * To enable tuning, use "hda=autotune hdb=autotune"
- * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune"
*/
/*
@@ -324,8 +322,7 @@
.name = DRV_NAME,
.chipset = ide_qd65xx,
.host_flags = IDE_HFLAG_IO_32BIT |
- IDE_HFLAG_NO_DMA |
- IDE_HFLAG_NO_AUTOTUNE,
+ IDE_HFLAG_NO_DMA,
.pio_mask = ATA_PIO4,
};
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index 6f25f0f..b54a14a 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -130,7 +130,7 @@
.name = DRV_NAME,
.chipset = ide_umc8672,
.port_ops = &umc8672_port_ops,
- .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE,
+ .host_flags = IDE_HFLAG_NO_DMA,
.pio_mask = ATA_PIO4,
};
