Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (72 commits)
asus-laptop: remove EXPERIMENTAL dependency
asus-laptop: use pr_fmt and pr_<level>
eeepc-laptop: cpufv updates
eeepc-laptop: sync eeepc-laptop with asus_acpi
asus_acpi: Deprecate in favor of asus-laptop
acpi4asus: update MAINTAINER and KConfig links
asus-laptop: platform dev as parent for led and backlight
eeepc-laptop: enable camera by default
ACPI: Rename ACPI processor device bus ID
acerhdf: Acer Aspire One fan control
ACPI: video: DMI workaround broken Acer 7720 BIOS enabling display brightness
ACPI: run ACPI device hot removal in kacpi_hotplug_wq
ACPI: Add the reference count to avoid unloading ACPI video bus twice
ACPI: DMI to disable Vista compatibility on some Sony laptops
ACPI: fix a deadlock in hotplug case
Show the physical device node of backlight class device.
ACPI: pdc init related memory leak with physical CPU hotplug
ACPI: pci_root: remove unused dev/fn information
ACPI: pci_root: simplify list traversals
ACPI: pci_root: use driver data rather than list lookup
...
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 92e1ab8..040fee6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -229,14 +229,6 @@
to assume that this machine's pmtimer latches its value
and always returns good values.
- acpi.power_nocheck= [HW,ACPI]
- Format: 1/0 enable/disable the check of power state.
- On some bogus BIOS the _PSC object/_STA object of
- power resource can't return the correct device power
- state. In such case it is unneccessary to check its
- power state again in power transition.
- 1 : disable the power state check
-
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 78e354b..f2296ec 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -920,7 +920,7 @@
echo '<LED number> off' >/proc/acpi/ibm/led
echo '<LED number> blink' >/proc/acpi/ibm/led
-The <LED number> range is 0 to 7. The set of LEDs that can be
+The <LED number> range is 0 to 15. The set of LEDs that can be
controlled varies from model to model. Here is the common ThinkPad
mapping:
@@ -932,6 +932,11 @@
5 - UltraBase battery slot
6 - (unknown)
7 - standby
+ 8 - dock status 1
+ 9 - dock status 2
+ 10, 11 - (unknown)
+ 12 - thinkvantage
+ 13, 14, 15 - (unknown)
All of the above can be turned on and off and can be made to blink.
@@ -940,10 +945,12 @@
The ThinkPad LED sysfs interface is described in detail by the LED class
documentation, in Documentation/leds-class.txt.
-The leds are named (in LED ID order, from 0 to 7):
+The LEDs are named (in LED ID order, from 0 to 12):
"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
"tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
-"tpacpi::unknown_led", "tpacpi::standby".
+"tpacpi::unknown_led", "tpacpi::standby", "tpacpi::dock_status1",
+"tpacpi::dock_status2", "tpacpi::unknown_led2", "tpacpi::unknown_led3",
+"tpacpi::thinkvantage".
Due to limitations in the sysfs LED class, if the status of the LED
indicators cannot be read due to an error, thinkpad-acpi will report it as
@@ -958,6 +965,12 @@
"timer" trigger, and leave the delay_on and delay_off parameters set to
zero (to request hardware acceleration autodetection).
+LEDs that are known not to exist in a given ThinkPad model are not
+made available through the sysfs interface. If you have a dock and you
+notice there are LEDs listed for your ThinkPad that do not exist (and
+are not in the dock), or if you notice that there are missing LEDs,
+a report to ibm-acpi-devel@lists.sourceforge.net is appreciated.
+
ACPI sounds -- /proc/acpi/ibm/beep
----------------------------------
@@ -1156,17 +1169,19 @@
display backlight brightness control methods have 16 levels, ranging
from 0 to 15.
-There are two interfaces to the firmware for direct brightness control,
-EC and UCMS (or CMOS). To select which one should be used, use the
-brightness_mode module parameter: brightness_mode=1 selects EC mode,
-brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
-mode with NVRAM backing (so that brightness changes are remembered
-across shutdown/reboot).
+For IBM ThinkPads, there are two interfaces to the firmware for direct
+brightness control, EC and UCMS (or CMOS). To select which one should be
+used, use the brightness_mode module parameter: brightness_mode=1 selects
+EC mode, brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
+mode with NVRAM backing (so that brightness changes are remembered across
+shutdown/reboot).
The driver tries to select which interface to use from a table of
defaults for each ThinkPad model. If it makes a wrong choice, please
report this as a bug, so that we can fix it.
+Lenovo ThinkPads only support brightness_mode=2 (UCMS).
+
When display backlight brightness controls are available through the
standard ACPI interface, it is best to use it instead of this direct
ThinkPad-specific interface. The driver will disable its native
@@ -1254,7 +1269,7 @@
procfs: /proc/acpi/ibm/fan
sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
- pwm1_enable
+ pwm1_enable, fan2_input
sysfs hwmon driver attributes: fan_watchdog
NOTE NOTE NOTE: fan control operations are disabled by default for
@@ -1267,6 +1282,9 @@
to work on later R, T, X and Z series ThinkPads but may show a bogus
value on other models.
+Some Lenovo ThinkPads support a secondary fan. This fan cannot be
+controlled separately, it shares the main fan control.
+
Fan levels:
Most ThinkPad fans work in "levels" at the firmware interface. Level 0
@@ -1397,6 +1415,11 @@
which can take up to two minutes. May return rubbish on older
ThinkPads.
+hwmon device attribute fan2_input:
+ Fan tachometer reading, in RPM, for the secondary fan.
+ Available only on some ThinkPads. If the secondary fan is
+ not installed, will always read 0.
+
hwmon driver attribute fan_watchdog:
Fan safety watchdog timer interval, in seconds. Minimum is
1 second, maximum is 120 seconds. 0 disables the watchdog.
@@ -1555,3 +1578,7 @@
0x020300: hotkey enable/disable support removed, attributes
hotkey_bios_enabled and hotkey_enable deprecated and
marked for removal.
+
+0x020400: Marker for 16 LEDs support. Also, LEDs that are known
+ to not exist in a given model are not registered with
+ the LED sysfs class anymore.
diff --git a/MAINTAINERS b/MAINTAINERS
index 303129a..05a4f306 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -230,6 +230,13 @@
S: Maintained
F: drivers/net/acenic*
+ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
+P: Peter Feuerer
+M: peter@piie.net
+W: http://piie.net/?section=acerhdf
+S: Maintained
+F: drivers/platform/x86/acerhdf.c
+
ACER WMI LAPTOP EXTRAS
P: Carlos Corbacho
M: carlos@strangeworlds.co.uk
@@ -913,8 +920,7 @@
P: Karol Kozimor
M: sziwan@users.sourceforge.net
L: acpi4asus-user@lists.sourceforge.net
-W: http://sourceforge.net/projects/acpi4asus
-W: http://xf.iksaif.net/acpi4asus
+W: http://acpi4asus.sf.net
S: Maintained
F: arch/x86/kernel/acpi/boot.c
F: drivers/platform/x86/asus_acpi.c
@@ -930,8 +936,7 @@
P: Corentin Chary
M: corentincj@iksaif.net
L: acpi4asus-user@lists.sourceforge.net
-W: http://sourceforge.net/projects/acpi4asus
-W: http://xf.iksaif.net/acpi4asus
+W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus-laptop.c
@@ -2110,7 +2115,7 @@
P: Corentin Chary
M: corentincj@iksaif.net
L: acpi4asus-user@lists.sourceforge.net
-W: http://sourceforge.net/projects/acpi4asus
+W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/eeepc-laptop.c
diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c
index cbe6cee..dbda7bd 100644
--- a/arch/ia64/kernel/acpi-processor.c
+++ b/arch/ia64/kernel/acpi-processor.c
@@ -71,3 +71,15 @@
}
EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
+
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr)
+{
+ if (pr->pdc) {
+ kfree(pr->pdc->pointer->buffer.pointer);
+ kfree(pr->pdc->pointer);
+ kfree(pr->pdc);
+ pr->pdc = NULL;
+ }
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc);
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 4518dc5..20d1465 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -144,6 +144,7 @@
#else /* !CONFIG_ACPI */
+#define acpi_disabled 1
#define acpi_lapic 0
#define acpi_ioapic 0
static inline void acpi_noirq_set(void) { }
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index cb739cc..d419f5c 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -121,6 +121,9 @@
extern int __init pci_mmcfg_arch_init(void);
extern void __init pci_mmcfg_arch_free(void);
+extern struct acpi_mcfg_allocation *pci_mmcfg_config;
+extern int pci_mmcfg_config_num;
+
/*
* AMD Fam10h CPUs are buggy, and cannot access MMIO config space
* on their northbrige except through the * %eax register. As such, you MUST
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6310861..6b8ca3a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -44,11 +44,7 @@
static int __initdata acpi_force = 0;
u32 acpi_rsdt_forced;
-#ifdef CONFIG_ACPI
-int acpi_disabled = 0;
-#else
-int acpi_disabled = 1;
-#endif
+int acpi_disabled;
EXPORT_SYMBOL(acpi_disabled);
#ifdef CONFIG_X86_64
@@ -122,72 +118,6 @@
early_iounmap(map, size);
}
-#ifdef CONFIG_PCI_MMCONFIG
-
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
-/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
-struct acpi_mcfg_allocation *pci_mmcfg_config;
-int pci_mmcfg_config_num;
-
-static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
-{
- if (!strcmp(mcfg->header.oem_id, "SGI"))
- acpi_mcfg_64bit_base_addr = TRUE;
-
- return 0;
-}
-
-int __init acpi_parse_mcfg(struct acpi_table_header *header)
-{
- struct acpi_table_mcfg *mcfg;
- unsigned long i;
- int config_size;
-
- if (!header)
- return -EINVAL;
-
- mcfg = (struct acpi_table_mcfg *)header;
-
- /* how many config structures do we have */
- pci_mmcfg_config_num = 0;
- i = header->length - sizeof(struct acpi_table_mcfg);
- while (i >= sizeof(struct acpi_mcfg_allocation)) {
- ++pci_mmcfg_config_num;
- i -= sizeof(struct acpi_mcfg_allocation);
- };
- if (pci_mmcfg_config_num == 0) {
- printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
- return -ENODEV;
- }
-
- config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
- pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
- if (!pci_mmcfg_config) {
- printk(KERN_WARNING PREFIX
- "No memory for MCFG config tables\n");
- return -ENOMEM;
- }
-
- memcpy(pci_mmcfg_config, &mcfg[1], config_size);
-
- acpi_mcfg_oem_check(mcfg);
-
- for (i = 0; i < pci_mmcfg_config_num; ++i) {
- if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
- !acpi_mcfg_64bit_base_addr) {
- printk(KERN_ERR PREFIX
- "MMCONFIG not in low 4GB of memory\n");
- kfree(pci_mmcfg_config);
- pci_mmcfg_config_num = 0;
- return -ENODEV;
- }
- }
-
- return 0;
-}
-#endif /* CONFIG_PCI_MMCONFIG */
-
#ifdef CONFIG_X86_LOCAL_APIC
static int __init acpi_parse_madt(struct acpi_table_header *table)
{
@@ -1519,14 +1449,6 @@
},
{
.callback = force_acpi_ht,
- .ident = "ASUS P4B266",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
- },
- },
- {
- .callback = force_acpi_ht,
.ident = "ASUS P2B-DS",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index bbbe4bb..8c44c23 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -34,12 +34,22 @@
flags->bm_check = 1;
else if (c->x86_vendor == X86_VENDOR_INTEL) {
/*
- * Today all CPUs that support C3 share cache.
- * TBD: This needs to look at cache shared map, once
- * multi-core detection patch makes to the base.
+ * Today all MP CPUs that support C3 share cache.
+ * And caches should not be flushed by software while
+ * entering C3 type state.
*/
flags->bm_check = 1;
}
+
+ /*
+ * On all recent Intel platforms, ARB_DISABLE is a nop.
+ * So, set bm_control to zero to indicate that ARB_DISABLE
+ * is not required while entering C3 type state on
+ * P4, Core and beyond CPUs
+ */
+ if (c->x86_vendor == X86_VENDOR_INTEL &&
+ (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14)))
+ flags->bm_control = 0;
}
EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index 7c074ee..d296f4a 100644
--- a/arch/x86/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
@@ -72,6 +72,7 @@
return;
}
+
/* Initialize _PDC data based on the CPU vendor */
void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
{
@@ -85,3 +86,15 @@
}
EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
+
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr)
+{
+ if (pr->pdc) {
+ kfree(pr->pdc->pointer->buffer.pointer);
+ kfree(pr->pdc->pointer);
+ kfree(pr->pdc);
+ pr->pdc = NULL;
+ }
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc);
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 8766b0e..712443e 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -523,6 +523,69 @@
static int __initdata known_bridge;
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
+/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
+struct acpi_mcfg_allocation *pci_mmcfg_config;
+int pci_mmcfg_config_num;
+
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+ if (!strcmp(mcfg->header.oem_id, "SGI"))
+ acpi_mcfg_64bit_base_addr = TRUE;
+
+ return 0;
+}
+
+static int __init pci_parse_mcfg(struct acpi_table_header *header)
+{
+ struct acpi_table_mcfg *mcfg;
+ unsigned long i;
+ int config_size;
+
+ if (!header)
+ return -EINVAL;
+
+ mcfg = (struct acpi_table_mcfg *)header;
+
+ /* how many config structures do we have */
+ pci_mmcfg_config_num = 0;
+ i = header->length - sizeof(struct acpi_table_mcfg);
+ while (i >= sizeof(struct acpi_mcfg_allocation)) {
+ ++pci_mmcfg_config_num;
+ i -= sizeof(struct acpi_mcfg_allocation);
+ };
+ if (pci_mmcfg_config_num == 0) {
+ printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
+ return -ENODEV;
+ }
+
+ config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
+ pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
+ if (!pci_mmcfg_config) {
+ printk(KERN_WARNING PREFIX
+ "No memory for MCFG config tables\n");
+ return -ENOMEM;
+ }
+
+ memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+ acpi_mcfg_oem_check(mcfg);
+
+ for (i = 0; i < pci_mmcfg_config_num; ++i) {
+ if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+ !acpi_mcfg_64bit_base_addr) {
+ printk(KERN_ERR PREFIX
+ "MMCONFIG not in low 4GB of memory\n");
+ kfree(pci_mmcfg_config);
+ pci_mmcfg_config_num = 0;
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
static void __init __pci_mmcfg_init(int early)
{
/* MMCONFIG disabled */
@@ -543,7 +606,7 @@
}
if (!known_bridge)
- acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+ acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
pci_mmcfg_reject_broken(early);
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 88e42ab..0df8fcb 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -61,6 +61,7 @@
static int acpi_ac_add(struct acpi_device *device);
static int acpi_ac_remove(struct acpi_device *device, int type);
static int acpi_ac_resume(struct acpi_device *device);
+static void acpi_ac_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id ac_device_ids[] = {
{"ACPI0003", 0},
@@ -72,10 +73,12 @@
.name = "ac",
.class = ACPI_AC_CLASS,
.ids = ac_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = acpi_ac_add,
.remove = acpi_ac_remove,
.resume = acpi_ac_resume,
+ .notify = acpi_ac_notify,
},
};
@@ -220,16 +223,14 @@
Driver Model
-------------------------------------------------------------------------- */
-static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_ac_notify(struct acpi_device *device, u32 event)
{
- struct acpi_ac *ac = data;
- struct acpi_device *device = NULL;
+ struct acpi_ac *ac = acpi_driver_data(device);
if (!ac)
return;
- device = ac->device;
switch (event) {
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -253,7 +254,6 @@
static int acpi_ac_add(struct acpi_device *device)
{
int result = 0;
- acpi_status status = AE_OK;
struct acpi_ac *ac = NULL;
@@ -286,13 +286,6 @@
ac->charger.get_property = get_ac_property;
power_supply_register(&ac->device->dev, &ac->charger);
#endif
- status = acpi_install_notify_handler(device->handle,
- ACPI_ALL_NOTIFY, acpi_ac_notify,
- ac);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
@@ -328,7 +321,6 @@
static int acpi_ac_remove(struct acpi_device *device, int type)
{
- acpi_status status = AE_OK;
struct acpi_ac *ac = NULL;
@@ -337,8 +329,6 @@
ac = acpi_driver_data(device);
- status = acpi_remove_notify_handler(device->handle,
- ACPI_ALL_NOTIFY, acpi_ac_notify);
#ifdef CONFIG_ACPI_SYSFS_POWER
if (ac->charger.dev)
power_supply_unregister(&ac->charger);
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index b0de631..58b4517 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -796,13 +796,12 @@
Driver Interface
-------------------------------------------------------------------------- */
-static void acpi_battery_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_battery_notify(struct acpi_device *device, u32 event)
{
- struct acpi_battery *battery = data;
- struct acpi_device *device;
+ struct acpi_battery *battery = acpi_driver_data(device);
+
if (!battery)
return;
- device = battery->device;
acpi_battery_update(battery);
acpi_bus_generate_proc_event(device, event,
acpi_battery_present(battery));
@@ -819,7 +818,6 @@
static int acpi_battery_add(struct acpi_device *device)
{
int result = 0;
- acpi_status status = 0;
struct acpi_battery *battery = NULL;
if (!device)
return -EINVAL;
@@ -834,22 +832,12 @@
acpi_battery_update(battery);
#ifdef CONFIG_ACPI_PROCFS_POWER
result = acpi_battery_add_fs(device);
- if (result)
- goto end;
#endif
- status = acpi_install_notify_handler(device->handle,
- ACPI_ALL_NOTIFY,
- acpi_battery_notify, battery);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Installing notify handler"));
- result = -ENODEV;
- goto end;
- }
- printk(KERN_INFO PREFIX "%s Slot [%s] (battery %s)\n",
- ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
- device->status.battery_present ? "present" : "absent");
- end:
- if (result) {
+ if (!result) {
+ printk(KERN_INFO PREFIX "%s Slot [%s] (battery %s)\n",
+ ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
+ device->status.battery_present ? "present" : "absent");
+ } else {
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_remove_fs(device);
#endif
@@ -860,15 +848,11 @@
static int acpi_battery_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
struct acpi_battery *battery = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
battery = acpi_driver_data(device);
- status = acpi_remove_notify_handler(device->handle,
- ACPI_ALL_NOTIFY,
- acpi_battery_notify);
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_remove_fs(device);
#endif
@@ -896,10 +880,12 @@
.name = "battery",
.class = ACPI_BATTERY_CLASS,
.ids = battery_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = acpi_battery_add,
.resume = acpi_battery_resume,
.remove = acpi_battery_remove,
+ .notify = acpi_battery_notify,
},
};
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 09c6980..f6baa77 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -192,6 +192,22 @@
DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+ {
+ .callback = dmi_disable_osi_vista,
+ .ident = "Sony VGN-NS10J_S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS10J_S"),
+ },
+ },
+ {
+ .callback = dmi_disable_osi_vista,
+ .ident = "Sony VGN-SR290J",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"),
+ },
+ },
/*
* BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index ae862f1..2876fc7 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -450,18 +450,16 @@
Notification Handling
-------------------------------------------------------------------------- */
-static int
-acpi_bus_check_device(struct acpi_device *device, int *status_changed)
+static void acpi_bus_check_device(acpi_handle handle)
{
- acpi_status status = 0;
+ struct acpi_device *device;
+ acpi_status status;
struct acpi_device_status old_status;
-
+ if (acpi_bus_get_device(handle, &device))
+ return;
if (!device)
- return -EINVAL;
-
- if (status_changed)
- *status_changed = 0;
+ return;
old_status = device->status;
@@ -471,22 +469,15 @@
*/
if (device->parent && !device->parent->status.present) {
device->status = device->parent->status;
- if (STRUCT_TO_INT(old_status) != STRUCT_TO_INT(device->status)) {
- if (status_changed)
- *status_changed = 1;
- }
- return 0;
+ return;
}
status = acpi_bus_get_status(device);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ return;
if (STRUCT_TO_INT(old_status) == STRUCT_TO_INT(device->status))
- return 0;
-
- if (status_changed)
- *status_changed = 1;
+ return;
/*
* Device Insertion/Removal
@@ -498,33 +489,17 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device removal detected\n"));
/* TBD: Handle device removal */
}
-
- return 0;
}
-static int acpi_bus_check_scope(struct acpi_device *device)
+static void acpi_bus_check_scope(acpi_handle handle)
{
- int result = 0;
- int status_changed = 0;
-
-
- if (!device)
- return -EINVAL;
-
/* Status Change? */
- result = acpi_bus_check_device(device, &status_changed);
- if (result)
- return result;
-
- if (!status_changed)
- return 0;
+ acpi_bus_check_device(handle);
/*
* TBD: Enumerate child devices within this device's scope and
* run acpi_bus_check_device()'s on them.
*/
-
- return 0;
}
static BLOCKING_NOTIFIER_HEAD(acpi_bus_notify_list);
@@ -547,22 +522,19 @@
*/
static void acpi_bus_notify(acpi_handle handle, u32 type, void *data)
{
- int result = 0;
struct acpi_device *device = NULL;
+ struct acpi_driver *driver;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Notification %#02x to handle %p\n",
+ type, handle));
blocking_notifier_call_chain(&acpi_bus_notify_list,
type, (void *)handle);
- if (acpi_bus_get_device(handle, &device))
- return;
-
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received BUS CHECK notification for device [%s]\n",
- device->pnp.bus_id));
- result = acpi_bus_check_scope(device);
+ acpi_bus_check_scope(handle);
/*
* TBD: We'll need to outsource certain events to non-ACPI
* drivers via the device manager (device.c).
@@ -570,10 +542,7 @@
break;
case ACPI_NOTIFY_DEVICE_CHECK:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received DEVICE CHECK notification for device [%s]\n",
- device->pnp.bus_id));
- result = acpi_bus_check_device(device, NULL);
+ acpi_bus_check_device(handle);
/*
* TBD: We'll need to outsource certain events to non-ACPI
* drivers via the device manager (device.c).
@@ -581,44 +550,26 @@
break;
case ACPI_NOTIFY_DEVICE_WAKE:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received DEVICE WAKE notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_EJECT_REQUEST:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received EJECT REQUEST notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received DEVICE CHECK LIGHT notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD: Exactly what does 'light' mean? */
break;
case ACPI_NOTIFY_FREQUENCY_MISMATCH:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received FREQUENCY MISMATCH notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_BUS_MODE_MISMATCH:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received BUS MODE MISMATCH notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_POWER_FAULT:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received POWER FAULT notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
@@ -629,7 +580,13 @@
break;
}
- return;
+ acpi_bus_get_device(handle, &device);
+ if (device) {
+ driver = device->driver;
+ if (driver && driver->ops.notify &&
+ (driver->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS))
+ driver->ops.notify(device, type);
+ }
}
/* --------------------------------------------------------------------------
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 8bd2c2a..a8a5c29 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -140,46 +140,6 @@
EXPORT_SYMBOL(acpi_get_physical_device);
-/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge
- * This should work in general, but did not on a Lenovo T61 for the
- * graphics card. But this must be fixed when the PCI device is
- * bound and the kernel device struct is attached to the acpi device
- * Note: A success call will increase reference count by one
- * Do call put_device(dev) on the returned device then
- */
-struct device *acpi_get_physical_pci_device(acpi_handle handle)
-{
- struct device *dev;
- long long device_id;
- acpi_status status;
-
- status =
- acpi_evaluate_integer(handle, "_ADR", NULL, &device_id);
-
- if (ACPI_FAILURE(status))
- return NULL;
-
- /* We need to attempt to determine whether the _ADR refers to a
- PCI device or not. There's no terribly good way to do this,
- so the best we can hope for is to assume that there'll never
- be a device in the host bridge */
- if (device_id >= 0x10000) {
- /* It looks like a PCI device. Does it exist? */
- dev = acpi_get_physical_device(handle);
- } else {
- /* It doesn't look like a PCI device. Does its parent
- exist? */
- acpi_handle phandle;
- if (acpi_get_parent(handle, &phandle))
- return NULL;
- dev = acpi_get_physical_device(phandle);
- }
- if (!dev)
- return NULL;
- return dev;
-}
-EXPORT_SYMBOL(acpi_get_physical_pci_device);
-
static int acpi_bind_one(struct device *dev, acpi_handle handle)
{
struct acpi_device *acpi_dev;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index d916bea..7167071 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -79,6 +79,7 @@
static void *acpi_irq_context;
static struct workqueue_struct *kacpid_wq;
static struct workqueue_struct *kacpi_notify_wq;
+static struct workqueue_struct *kacpi_hotplug_wq;
struct acpi_res_list {
resource_size_t start;
@@ -192,8 +193,10 @@
{
kacpid_wq = create_singlethread_workqueue("kacpid");
kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
+ kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
BUG_ON(!kacpid_wq);
BUG_ON(!kacpi_notify_wq);
+ BUG_ON(!kacpi_hotplug_wq);
return AE_OK;
}
@@ -206,6 +209,7 @@
destroy_workqueue(kacpid_wq);
destroy_workqueue(kacpi_notify_wq);
+ destroy_workqueue(kacpi_hotplug_wq);
return AE_OK;
}
@@ -716,6 +720,7 @@
acpi_status status = AE_OK;
struct acpi_os_dpc *dpc;
struct workqueue_struct *queue;
+ work_func_t func;
int ret;
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Scheduling function [%p(%p)] for deferred execution.\n",
@@ -740,15 +745,17 @@
dpc->function = function;
dpc->context = context;
- if (!hp) {
- INIT_WORK(&dpc->work, acpi_os_execute_deferred);
- queue = (type == OSL_NOTIFY_HANDLER) ?
- kacpi_notify_wq : kacpid_wq;
- ret = queue_work(queue, &dpc->work);
- } else {
- INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred);
- ret = schedule_work(&dpc->work);
- }
+ /*
+ * We can't run hotplug code in keventd_wq/kacpid_wq/kacpid_notify_wq
+ * because the hotplug code may call driver .remove() functions,
+ * which invoke flush_scheduled_work/acpi_os_wait_events_complete
+ * to flush these workqueues.
+ */
+ queue = hp ? kacpi_hotplug_wq :
+ (type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
+ func = hp ? acpi_os_execute_hp_deferred : acpi_os_execute_deferred;
+ INIT_WORK(&dpc->work, func);
+ ret = queue_work(queue, &dpc->work);
if (!ret) {
printk(KERN_ERR PREFIX
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
index bc46de3..a5a77b7 100644
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -24,12 +24,7 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
@@ -38,310 +33,76 @@
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_bind");
-struct acpi_pci_data {
- struct acpi_pci_id id;
+static int acpi_pci_unbind(struct acpi_device *device)
+{
+ struct pci_dev *dev;
+
+ dev = acpi_get_pci_dev(device->handle);
+ if (!dev || !dev->subordinate)
+ goto out;
+
+ acpi_pci_irq_del_prt(dev->subordinate);
+
+ device->ops.bind = NULL;
+ device->ops.unbind = NULL;
+
+out:
+ pci_dev_put(dev);
+ return 0;
+}
+
+static int acpi_pci_bind(struct acpi_device *device)
+{
+ acpi_status status;
+ acpi_handle handle;
struct pci_bus *bus;
struct pci_dev *dev;
-};
-static int acpi_pci_unbind(struct acpi_device *device);
-
-static void acpi_pci_data_handler(acpi_handle handle, u32 function,
- void *context)
-{
-
- /* TBD: Anything we need to do here? */
-
- return;
-}
-
-/**
- * acpi_get_pci_id
- * ------------------
- * This function is used by the ACPI Interpreter (a.k.a. Core Subsystem)
- * to resolve PCI information for ACPI-PCI devices defined in the namespace.
- * This typically occurs when resolving PCI operation region information.
- */
-acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id)
-{
- int result = 0;
- acpi_status status = AE_OK;
- struct acpi_device *device = NULL;
- struct acpi_pci_data *data = NULL;
-
-
- if (!id)
- return AE_BAD_PARAMETER;
-
- result = acpi_bus_get_device(handle, &device);
- if (result) {
- printk(KERN_ERR PREFIX
- "Invalid ACPI Bus context for device %s\n",
- acpi_device_bid(device));
- return AE_NOT_EXIST;
- }
-
- status = acpi_get_data(handle, acpi_pci_data_handler, (void **)&data);
- if (ACPI_FAILURE(status) || !data) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Invalid ACPI-PCI context for device %s",
- acpi_device_bid(device)));
- return status;
- }
-
- *id = data->id;
+ dev = acpi_get_pci_dev(device->handle);
+ if (!dev)
+ return 0;
/*
- id->segment = data->id.segment;
- id->bus = data->id.bus;
- id->device = data->id.device;
- id->function = data->id.function;
+ * Install the 'bind' function to facilitate callbacks for
+ * children of the P2P bridge.
*/
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device %s has PCI address %04x:%02x:%02x.%d\n",
- acpi_device_bid(device), id->segment, id->bus,
- id->device, id->function));
-
- return AE_OK;
-}
-
-EXPORT_SYMBOL(acpi_get_pci_id);
-
-int acpi_pci_bind(struct acpi_device *device)
-{
- int result = 0;
- acpi_status status;
- struct acpi_pci_data *data;
- struct acpi_pci_data *pdata;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_handle handle;
-
- if (!device || !device->parent)
- return -EINVAL;
-
- data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
- if (ACPI_FAILURE(status)) {
- kfree(data);
- return -ENODEV;
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI device [%s]...\n",
- (char *)buffer.pointer));
-
- /*
- * Segment & Bus
- * -------------
- * These are obtained via the parent device's ACPI-PCI context.
- */
- status = acpi_get_data(device->parent->handle, acpi_pci_data_handler,
- (void **)&pdata);
- if (ACPI_FAILURE(status) || !pdata || !pdata->bus) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Invalid ACPI-PCI context for parent device %s",
- acpi_device_bid(device->parent)));
- result = -ENODEV;
- goto end;
- }
- data->id.segment = pdata->id.segment;
- data->id.bus = pdata->bus->number;
-
- /*
- * Device & Function
- * -----------------
- * These are simply obtained from the device's _ADR method. Note
- * that a value of zero is valid.
- */
- data->id.device = device->pnp.bus_address >> 16;
- data->id.function = device->pnp.bus_address & 0xFFFF;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "...to %04x:%02x:%02x.%d\n",
- data->id.segment, data->id.bus, data->id.device,
- data->id.function));
-
- /*
- * TBD: Support slot devices (e.g. function=0xFFFF).
- */
-
- /*
- * Locate PCI Device
- * -----------------
- * Locate matching device in PCI namespace. If it doesn't exist
- * this typically means that the device isn't currently inserted
- * (e.g. docking station, port replicator, etc.).
- */
- data->dev = pci_get_slot(pdata->bus,
- PCI_DEVFN(data->id.device, data->id.function));
- if (!data->dev) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device %04x:%02x:%02x.%d not present in PCI namespace\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function));
- result = -ENODEV;
- goto end;
- }
- if (!data->dev->bus) {
- printk(KERN_ERR PREFIX
- "Device %04x:%02x:%02x.%d has invalid 'bus' field\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function);
- result = -ENODEV;
- goto end;
- }
-
- /*
- * PCI Bridge?
- * -----------
- * If so, set the 'bus' field and install the 'bind' function to
- * facilitate callbacks for all of its children.
- */
- if (data->dev->subordinate) {
+ if (dev->subordinate) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d is a PCI bridge\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function));
- data->bus = data->dev->subordinate;
+ pci_domain_nr(dev->bus), dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)));
device->ops.bind = acpi_pci_bind;
device->ops.unbind = acpi_pci_unbind;
}
/*
- * Attach ACPI-PCI Context
- * -----------------------
- * Thus binding the ACPI and PCI devices.
- */
- status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to attach ACPI-PCI context to device %s",
- acpi_device_bid(device)));
- result = -ENODEV;
- goto end;
- }
-
- /*
- * PCI Routing Table
- * -----------------
- * Evaluate and parse _PRT, if exists. This code is independent of
- * PCI bridges (above) to allow parsing of _PRT objects within the
- * scope of non-bridge devices. Note that _PRTs within the scope of
- * a PCI bridge assume the bridge's subordinate bus number.
+ * Evaluate and parse _PRT, if exists. This code allows parsing of
+ * _PRT objects within the scope of non-bridge devices. Note that
+ * _PRTs within the scope of a PCI bridge assume the bridge's
+ * subordinate bus number.
*
* TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
*/
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
- if (ACPI_SUCCESS(status)) {
- if (data->bus) /* PCI-PCI bridge */
- acpi_pci_irq_add_prt(device->handle, data->id.segment,
- data->bus->number);
- else /* non-bridge PCI device */
- acpi_pci_irq_add_prt(device->handle, data->id.segment,
- data->id.bus);
- }
-
- end:
- kfree(buffer.pointer);
- if (result) {
- pci_dev_put(data->dev);
- kfree(data);
- }
- return result;
-}
-
-static int acpi_pci_unbind(struct acpi_device *device)
-{
- int result = 0;
- acpi_status status;
- struct acpi_pci_data *data;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
-
- if (!device || !device->parent)
- return -EINVAL;
-
- status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ goto out;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unbinding PCI device [%s]...\n",
- (char *) buffer.pointer));
- kfree(buffer.pointer);
+ if (dev->subordinate)
+ bus = dev->subordinate;
+ else
+ bus = dev->bus;
- status =
- acpi_get_data(device->handle, acpi_pci_data_handler,
- (void **)&data);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
+ acpi_pci_irq_add_prt(device->handle, bus);
- status = acpi_detach_data(device->handle, acpi_pci_data_handler);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to detach data from device %s",
- acpi_device_bid(device)));
- result = -ENODEV;
- goto end;
- }
- if (data->dev->subordinate) {
- acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
- }
- pci_dev_put(data->dev);
- kfree(data);
-
- end:
- return result;
+out:
+ pci_dev_put(dev);
+ return 0;
}
-int
-acpi_pci_bind_root(struct acpi_device *device,
- struct acpi_pci_id *id, struct pci_bus *bus)
+int acpi_pci_bind_root(struct acpi_device *device)
{
- int result = 0;
- acpi_status status;
- struct acpi_pci_data *data = NULL;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
- if (!device || !id || !bus) {
- return -EINVAL;
- }
-
- data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->id = *id;
- data->bus = bus;
device->ops.bind = acpi_pci_bind;
device->ops.unbind = acpi_pci_unbind;
- status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
- if (ACPI_FAILURE(status)) {
- kfree (data);
- return -ENODEV;
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI root bridge [%s] to "
- "%04x:%02x\n", (char *)buffer.pointer,
- id->segment, id->bus));
-
- status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to attach ACPI-PCI context to device %s",
- (char *)buffer.pointer));
- result = -ENODEV;
- goto end;
- }
-
- end:
- kfree(buffer.pointer);
- if (result != 0)
- kfree(data);
-
- return result;
+ return 0;
}
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 2faa9e2..b794eb8 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -182,7 +182,7 @@
}
}
-static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus,
+static int acpi_pci_irq_add_entry(acpi_handle handle, struct pci_bus *bus,
struct acpi_pci_routing_table *prt)
{
struct acpi_prt_entry *entry;
@@ -196,8 +196,8 @@
* 1=INTA, 2=INTB. We use the PCI encoding throughout, so convert
* it here.
*/
- entry->id.segment = segment;
- entry->id.bus = bus;
+ entry->id.segment = pci_domain_nr(bus);
+ entry->id.bus = bus->number;
entry->id.device = (prt->address >> 16) & 0xFFFF;
entry->pin = prt->pin + 1;
@@ -242,7 +242,7 @@
return 0;
}
-int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
+int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus)
{
acpi_status status;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -271,7 +271,7 @@
entry = buffer.pointer;
while (entry && (entry->length > 0)) {
- acpi_pci_irq_add_entry(handle, segment, bus, entry);
+ acpi_pci_irq_add_entry(handle, bus, entry);
entry = (struct acpi_pci_routing_table *)
((unsigned long)entry + entry->length);
}
@@ -280,16 +280,17 @@
return 0;
}
-void acpi_pci_irq_del_prt(int segment, int bus)
+void acpi_pci_irq_del_prt(struct pci_bus *bus)
{
struct acpi_prt_entry *entry, *tmp;
printk(KERN_DEBUG
"ACPI: Delete PCI Interrupt Routing Table for %04x:%02x\n",
- segment, bus);
+ pci_domain_nr(bus), bus->number);
spin_lock(&acpi_prt_lock);
list_for_each_entry_safe(entry, tmp, &acpi_prt_list, list) {
- if (segment == entry->id.segment && bus == entry->id.bus) {
+ if (pci_domain_nr(bus) == entry->id.segment
+ && bus->number == entry->id.bus) {
list_del(&entry->list);
kfree(entry);
}
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 196f97d..8a5bf3b 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -63,9 +63,10 @@
struct acpi_pci_root {
struct list_head node;
- struct acpi_device * device;
- struct acpi_pci_id id;
+ struct acpi_device *device;
struct pci_bus *bus;
+ u16 segment;
+ u8 bus_nr;
u32 osc_support_set; /* _OSC state of support bits */
u32 osc_control_set; /* _OSC state of control bits */
@@ -82,7 +83,7 @@
int acpi_pci_register_driver(struct acpi_pci_driver *driver)
{
int n = 0;
- struct list_head *entry;
+ struct acpi_pci_root *root;
struct acpi_pci_driver **pptr = &sub_driver;
while (*pptr)
@@ -92,9 +93,7 @@
if (!driver->add)
return 0;
- list_for_each(entry, &acpi_pci_roots) {
- struct acpi_pci_root *root;
- root = list_entry(entry, struct acpi_pci_root, node);
+ list_for_each_entry(root, &acpi_pci_roots, node) {
driver->add(root->device->handle);
n++;
}
@@ -106,7 +105,7 @@
void acpi_pci_unregister_driver(struct acpi_pci_driver *driver)
{
- struct list_head *entry;
+ struct acpi_pci_root *root;
struct acpi_pci_driver **pptr = &sub_driver;
while (*pptr) {
@@ -120,28 +119,48 @@
if (!driver->remove)
return;
- list_for_each(entry, &acpi_pci_roots) {
- struct acpi_pci_root *root;
- root = list_entry(entry, struct acpi_pci_root, node);
+ list_for_each_entry(root, &acpi_pci_roots, node)
driver->remove(root->device->handle);
- }
}
EXPORT_SYMBOL(acpi_pci_unregister_driver);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int seg, unsigned int bus)
{
- struct acpi_pci_root *tmp;
+ struct acpi_pci_root *root;
- list_for_each_entry(tmp, &acpi_pci_roots, node) {
- if ((tmp->id.segment == (u16) seg) && (tmp->id.bus == (u16) bus))
- return tmp->device->handle;
- }
+ list_for_each_entry(root, &acpi_pci_roots, node)
+ if ((root->segment == (u16) seg) && (root->bus_nr == (u16) bus))
+ return root->device->handle;
return NULL;
}
EXPORT_SYMBOL_GPL(acpi_get_pci_rootbridge_handle);
+/**
+ * acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
+ * @handle - the ACPI CA node in question.
+ *
+ * Note: we could make this API take a struct acpi_device * instead, but
+ * for now, it's more convenient to operate on an acpi_handle.
+ */
+int acpi_is_root_bridge(acpi_handle handle)
+{
+ int ret;
+ struct acpi_device *device;
+
+ ret = acpi_bus_get_device(handle, &device);
+ if (ret)
+ return 0;
+
+ ret = acpi_match_device_ids(device, root_device_ids);
+ if (ret)
+ return 0;
+ else
+ return 1;
+}
+EXPORT_SYMBOL_GPL(acpi_is_root_bridge);
+
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
@@ -161,19 +180,22 @@
return AE_OK;
}
-static acpi_status try_get_root_bridge_busnr(acpi_handle handle, int *busnum)
+static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
+ unsigned long long *bus)
{
acpi_status status;
+ int busnum;
- *busnum = -1;
+ busnum = -1;
status =
acpi_walk_resources(handle, METHOD_NAME__CRS,
- get_root_bridge_busnr_callback, busnum);
+ get_root_bridge_busnr_callback, &busnum);
if (ACPI_FAILURE(status))
return status;
/* Check if we really get a bus number from _CRS */
- if (*busnum == -1)
+ if (busnum == -1)
return AE_ERROR;
+ *bus = busnum;
return AE_OK;
}
@@ -298,6 +320,7 @@
static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
{
struct acpi_pci_root *root;
+
list_for_each_entry(root, &acpi_pci_roots, node) {
if (root->device->handle == handle)
return root;
@@ -305,6 +328,87 @@
return NULL;
}
+struct acpi_handle_node {
+ struct list_head node;
+ acpi_handle handle;
+};
+
+/**
+ * acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev
+ * @handle: the handle in question
+ *
+ * Given an ACPI CA handle, the desired PCI device is located in the
+ * list of PCI devices.
+ *
+ * If the device is found, its reference count is increased and this
+ * function returns a pointer to its data structure. The caller must
+ * decrement the reference count by calling pci_dev_put().
+ * If no device is found, %NULL is returned.
+ */
+struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
+{
+ int dev, fn;
+ unsigned long long adr;
+ acpi_status status;
+ acpi_handle phandle;
+ struct pci_bus *pbus;
+ struct pci_dev *pdev = NULL;
+ struct acpi_handle_node *node, *tmp;
+ struct acpi_pci_root *root;
+ LIST_HEAD(device_list);
+
+ /*
+ * Walk up the ACPI CA namespace until we reach a PCI root bridge.
+ */
+ phandle = handle;
+ while (!acpi_is_root_bridge(phandle)) {
+ node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL);
+ if (!node)
+ goto out;
+
+ INIT_LIST_HEAD(&node->node);
+ node->handle = phandle;
+ list_add(&node->node, &device_list);
+
+ status = acpi_get_parent(phandle, &phandle);
+ if (ACPI_FAILURE(status))
+ goto out;
+ }
+
+ root = acpi_pci_find_root(phandle);
+ if (!root)
+ goto out;
+
+ pbus = root->bus;
+
+ /*
+ * Now, walk back down the PCI device tree until we return to our
+ * original handle. Assumes that everything between the PCI root
+ * bridge and the device we're looking for must be a P2P bridge.
+ */
+ list_for_each_entry(node, &device_list, node) {
+ acpi_handle hnd = node->handle;
+ status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status))
+ goto out;
+ dev = (adr >> 16) & 0xffff;
+ fn = adr & 0xffff;
+
+ pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
+ if (hnd == handle)
+ break;
+
+ pbus = pdev->subordinate;
+ pci_dev_put(pdev);
+ }
+out:
+ list_for_each_entry_safe(node, tmp, &device_list, node)
+ kfree(node);
+
+ return pdev;
+}
+EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
+
/**
* acpi_pci_osc_control_set - commit requested control to Firmware
* @handle: acpi_handle for the target ACPI object
@@ -363,31 +467,46 @@
static int __devinit acpi_pci_root_add(struct acpi_device *device)
{
- int result = 0;
- struct acpi_pci_root *root = NULL;
- struct acpi_pci_root *tmp;
- acpi_status status = AE_OK;
- unsigned long long value = 0;
- acpi_handle handle = NULL;
+ unsigned long long segment, bus;
+ acpi_status status;
+ int result;
+ struct acpi_pci_root *root;
+ acpi_handle handle;
struct acpi_device *child;
u32 flags, base_flags;
+ segment = 0;
+ status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
+ &segment);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
+ return -ENODEV;
+ }
- if (!device)
- return -EINVAL;
+ /* Check _CRS first, then _BBN. If no _BBN, default to zero. */
+ bus = 0;
+ status = try_get_root_bridge_busnr(device->handle, &bus);
+ if (ACPI_FAILURE(status)) {
+ status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL, &bus);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ printk(KERN_ERR PREFIX
+ "no bus number in _CRS and can't evaluate _BBN\n");
+ return -ENODEV;
+ }
+ }
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
return -ENOMEM;
- INIT_LIST_HEAD(&root->node);
+ INIT_LIST_HEAD(&root->node);
root->device = device;
+ root->segment = segment & 0xFFFF;
+ root->bus_nr = bus & 0xFF;
strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
- device->ops.bind = acpi_pci_bind;
-
/*
* All supported architectures that use ACPI have support for
* PCI domains, so we indicate this in _OSC support capabilities.
@@ -395,79 +514,6 @@
flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
acpi_pci_osc_support(root, flags);
- /*
- * Segment
- * -------
- * Obtained via _SEG, if exists, otherwise assumed to be zero (0).
- */
- status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
- &value);
- switch (status) {
- case AE_OK:
- root->id.segment = (u16) value;
- break;
- case AE_NOT_FOUND:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Assuming segment 0 (no _SEG)\n"));
- root->id.segment = 0;
- break;
- default:
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SEG"));
- result = -ENODEV;
- goto end;
- }
-
- /*
- * Bus
- * ---
- * Obtained via _BBN, if exists, otherwise assumed to be zero (0).
- */
- status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL,
- &value);
- switch (status) {
- case AE_OK:
- root->id.bus = (u16) value;
- break;
- case AE_NOT_FOUND:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Assuming bus 0 (no _BBN)\n"));
- root->id.bus = 0;
- break;
- default:
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BBN"));
- result = -ENODEV;
- goto end;
- }
-
- /* Some systems have wrong _BBN */
- list_for_each_entry(tmp, &acpi_pci_roots, node) {
- if ((tmp->id.segment == root->id.segment)
- && (tmp->id.bus == root->id.bus)) {
- int bus = 0;
- acpi_status status;
-
- printk(KERN_ERR PREFIX
- "Wrong _BBN value, reboot"
- " and use option 'pci=noacpi'\n");
-
- status = try_get_root_bridge_busnr(device->handle, &bus);
- if (ACPI_FAILURE(status))
- break;
- if (bus != root->id.bus) {
- printk(KERN_INFO PREFIX
- "PCI _CRS %d overrides _BBN 0\n", bus);
- root->id.bus = bus;
- }
- break;
- }
- }
- /*
- * Device & Function
- * -----------------
- * Obtained from _ADR (which has already been evaluated for us).
- */
- root->id.device = device->pnp.bus_address >> 16;
- root->id.function = device->pnp.bus_address & 0xFFFF;
-
/*
* TBD: Need PCI interface for enumeration/configuration of roots.
*/
@@ -477,7 +523,7 @@
printk(KERN_INFO PREFIX "%s [%s] (%04x:%02x)\n",
acpi_device_name(device), acpi_device_bid(device),
- root->id.segment, root->id.bus);
+ root->segment, root->bus_nr);
/*
* Scan the Root Bridge
@@ -486,11 +532,11 @@
* PCI namespace does not get created until this call is made (and
* thus the root bridge's pci_dev does not exist).
*/
- root->bus = pci_acpi_scan_root(device, root->id.segment, root->id.bus);
+ root->bus = pci_acpi_scan_root(device, segment, bus);
if (!root->bus) {
printk(KERN_ERR PREFIX
"Bus %04x:%02x not present in PCI namespace\n",
- root->id.segment, root->id.bus);
+ root->segment, root->bus_nr);
result = -ENODEV;
goto end;
}
@@ -500,7 +546,7 @@
* -----------------------
* Thus binding the ACPI and PCI devices.
*/
- result = acpi_pci_bind_root(device, &root->id, root->bus);
+ result = acpi_pci_bind_root(device);
if (result)
goto end;
@@ -511,8 +557,7 @@
*/
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
if (ACPI_SUCCESS(status))
- result = acpi_pci_irq_add_prt(device->handle, root->id.segment,
- root->id.bus);
+ result = acpi_pci_irq_add_prt(device->handle, root->bus);
/*
* Scan and bind all _ADR-Based Devices
@@ -531,42 +576,28 @@
if (flags != base_flags)
acpi_pci_osc_support(root, flags);
- end:
- if (result) {
- if (!list_empty(&root->node))
- list_del(&root->node);
- kfree(root);
- }
+ return 0;
+end:
+ if (!list_empty(&root->node))
+ list_del(&root->node);
+ kfree(root);
return result;
}
static int acpi_pci_root_start(struct acpi_device *device)
{
- struct acpi_pci_root *root;
+ struct acpi_pci_root *root = acpi_driver_data(device);
-
- list_for_each_entry(root, &acpi_pci_roots, node) {
- if (root->device == device) {
- pci_bus_add_devices(root->bus);
- return 0;
- }
- }
- return -ENODEV;
+ pci_bus_add_devices(root->bus);
+ return 0;
}
static int acpi_pci_root_remove(struct acpi_device *device, int type)
{
- struct acpi_pci_root *root = NULL;
-
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- root = acpi_driver_data(device);
+ struct acpi_pci_root *root = acpi_driver_data(device);
kfree(root);
-
return 0;
}
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 56665a6..d74365d 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -194,7 +194,7 @@
static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0, state;
+ int result = 0;
int found = 0;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
@@ -236,18 +236,6 @@
if (ACPI_FAILURE(status))
return -ENODEV;
- if (!acpi_power_nocheck) {
- /*
- * If acpi_power_nocheck is set, it is unnecessary to check
- * the power state after power transition.
- */
- result = acpi_power_get_state(resource->device->handle,
- &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_ON)
- return -ENOEXEC;
- }
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D0;
@@ -258,7 +246,7 @@
static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0, state;
+ int result = 0;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
struct list_head *node, *next;
@@ -293,18 +281,6 @@
if (ACPI_FAILURE(status))
return -ENODEV;
- if (!acpi_power_nocheck) {
- /*
- * If acpi_power_nocheck is set, it is unnecessary to check
- * the power state after power transition.
- */
- result = acpi_power_get_state(handle, &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_OFF)
- return -ENOEXEC;
- }
-
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D3;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 23f0fb8..84e0f3c 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -89,7 +89,7 @@
static const struct acpi_device_id processor_device_ids[] = {
{ACPI_PROCESSOR_OBJECT_HID, 0},
- {ACPI_PROCESSOR_HID, 0},
+ {"ACPI0007", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, processor_device_ids);
@@ -596,7 +596,21 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No bus mastering arbitration control\n"));
- if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) {
+ if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
+ /* Declared with "Processor" statement; match ProcessorID */
+ status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX "Evaluating processor object\n");
+ return -ENODEV;
+ }
+
+ /*
+ * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+ * >>> 'acpi_get_processor_id(acpi_id, &id)' in
+ * arch/xxx/acpi.c
+ */
+ pr->acpi_id = object.processor.proc_id;
+ } else {
/*
* Declared with "Device" statement; match _UID.
* Note that we don't handle string _UIDs yet.
@@ -611,20 +625,6 @@
}
device_declaration = 1;
pr->acpi_id = value;
- } else {
- /* Declared with "Processor" statement; match ProcessorID */
- status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Evaluating processor object\n");
- return -ENODEV;
- }
-
- /*
- * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
- * >>> 'acpi_get_processor_id(acpi_id, &id)' in
- * arch/xxx/acpi.c
- */
- pr->acpi_id = object.processor.proc_id;
}
cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
@@ -649,7 +649,16 @@
return -ENODEV;
}
}
-
+ /*
+ * On some boxes several processors use the same processor bus id.
+ * But they are located in different scope. For example:
+ * \_SB.SCK0.CPU0
+ * \_SB.SCK1.CPU0
+ * Rename the processor device bus id. And the new bus id will be
+ * generated as the following format:
+ * CPU+CPU ID.
+ */
+ sprintf(acpi_device_bid(device), "CPU%X", pr->id);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
pr->acpi_id));
@@ -731,6 +740,8 @@
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
acpi_processor_set_pdc(pr);
+ arch_acpi_processor_cleanup_pdc(pr);
+
#ifdef CONFIG_CPU_FREQ
acpi_processor_ppc_has_changed(pr);
#endif
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 10a2d91..0efa59e 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -139,7 +139,7 @@
* are affected too. We pick the most conservative approach: we assume
* that the local APIC stops in both C2 and C3.
*/
-static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+static void lapic_timer_check_state(int state, struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
struct acpi_processor_power *pwr = &pr->power;
@@ -162,7 +162,7 @@
pr->power.timer_broadcast_on_state = state;
}
-static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
+static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
{
unsigned long reason;
@@ -173,7 +173,7 @@
}
/* Power(C) State timer broadcast control */
-static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+static void lapic_timer_state_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int broadcast)
{
@@ -190,10 +190,10 @@
#else
-static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+static void lapic_timer_check_state(int state, struct acpi_processor *pr,
struct acpi_processor_cx *cstate) { }
-static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) { }
-static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
+static void lapic_timer_state_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int broadcast)
{
@@ -515,7 +515,8 @@
static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
- static int bm_check_flag;
+ static int bm_check_flag = -1;
+ static int bm_control_flag = -1;
if (!cx->address)
@@ -545,12 +546,14 @@
}
/* All the logic here assumes flags.bm_check is same across all CPUs */
- if (!bm_check_flag) {
+ if (bm_check_flag == -1) {
/* Determine whether bm_check is needed based on CPU */
acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
bm_check_flag = pr->flags.bm_check;
+ bm_control_flag = pr->flags.bm_control;
} else {
pr->flags.bm_check = bm_check_flag;
+ pr->flags.bm_control = bm_control_flag;
}
if (pr->flags.bm_check) {
@@ -614,29 +617,25 @@
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
- acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C2:
acpi_processor_power_verify_c2(cx);
- if (cx->valid)
- acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C3:
acpi_processor_power_verify_c3(pr, cx);
- if (cx->valid)
- acpi_timer_check_state(i, pr, cx);
break;
}
- if (cx->valid)
- tsc_check_state(cx->type);
+ if (!cx->valid)
+ continue;
- if (cx->valid)
- working++;
+ lapic_timer_check_state(i, pr, cx);
+ tsc_check_state(cx->type);
+ working++;
}
- acpi_propagate_timer_broadcast(pr);
+ lapic_timer_propagate_broadcast(pr);
return (working);
}
@@ -839,7 +838,7 @@
return 0;
}
- acpi_state_timer_broadcast(pr, cx, 1);
+ lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
@@ -847,7 +846,7 @@
local_irq_enable();
cx->usage++;
- acpi_state_timer_broadcast(pr, cx, 0);
+ lapic_timer_state_broadcast(pr, cx, 0);
return idle_time;
}
@@ -892,7 +891,7 @@
* Must be done before busmaster disable as we might need to
* access HPET !
*/
- acpi_state_timer_broadcast(pr, cx, 1);
+ lapic_timer_state_broadcast(pr, cx, 1);
if (cx->type == ACPI_STATE_C3)
ACPI_FLUSH_CPU_CACHE();
@@ -914,7 +913,7 @@
cx->usage++;
- acpi_state_timer_broadcast(pr, cx, 0);
+ lapic_timer_state_broadcast(pr, cx, 0);
cx->time += sleep_ticks;
return idle_time;
}
@@ -981,7 +980,7 @@
* Must be done before busmaster disable as we might need to
* access HPET !
*/
- acpi_state_timer_broadcast(pr, cx, 1);
+ lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
/*
@@ -1026,7 +1025,7 @@
cx->usage++;
- acpi_state_timer_broadcast(pr, cx, 0);
+ lapic_timer_state_broadcast(pr, cx, 0);
cx->time += sleep_ticks;
return idle_time;
}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 8ff510b..781435d 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -95,7 +95,7 @@
}
static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL);
-static int acpi_bus_hot_remove_device(void *context)
+static void acpi_bus_hot_remove_device(void *context)
{
struct acpi_device *device;
acpi_handle handle = context;
@@ -104,10 +104,10 @@
acpi_status status = AE_OK;
if (acpi_bus_get_device(handle, &device))
- return 0;
+ return;
if (!device)
- return 0;
+ return;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Hot-removing device %s...\n", dev_name(&device->dev)));
@@ -115,7 +115,7 @@
if (acpi_bus_trim(device, 1)) {
printk(KERN_ERR PREFIX
"Removing device failed\n");
- return -1;
+ return;
}
/* power off device */
@@ -142,9 +142,10 @@
*/
status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ printk(KERN_WARNING PREFIX
+ "Eject device failed\n");
- return 0;
+ return;
}
static ssize_t
@@ -155,7 +156,6 @@
acpi_status status;
acpi_object_type type = 0;
struct acpi_device *acpi_device = to_acpi_device(d);
- struct task_struct *task;
if ((!count) || (buf[0] != '1')) {
return -EINVAL;
@@ -172,11 +172,7 @@
goto err;
}
- /* remove the device in another thread to fix the deadlock issue */
- task = kthread_run(acpi_bus_hot_remove_device,
- acpi_device->handle, "acpi_hot_remove_device");
- if (IS_ERR(task))
- ret = PTR_ERR(task);
+ acpi_os_hotplug_execute(acpi_bus_hot_remove_device, acpi_device->handle);
err:
return ret;
}
@@ -198,12 +194,12 @@
int result;
result = acpi_get_name(acpi_dev->handle, ACPI_FULL_PATHNAME, &path);
- if(result)
+ if (result)
goto end;
result = sprintf(buf, "%s\n", (char*)path.pointer);
kfree(path.pointer);
- end:
+end:
return result;
}
static DEVICE_ATTR(path, 0444, acpi_device_path_show, NULL);
@@ -217,21 +213,21 @@
/*
* Devices gotten from FADT don't have a "path" attribute
*/
- if(dev->handle) {
+ if (dev->handle) {
result = device_create_file(&dev->dev, &dev_attr_path);
- if(result)
+ if (result)
goto end;
}
- if(dev->flags.hardware_id) {
+ if (dev->flags.hardware_id) {
result = device_create_file(&dev->dev, &dev_attr_hid);
- if(result)
+ if (result)
goto end;
}
- if (dev->flags.hardware_id || dev->flags.compatible_ids){
+ if (dev->flags.hardware_id || dev->flags.compatible_ids) {
result = device_create_file(&dev->dev, &dev_attr_modalias);
- if(result)
+ if (result)
goto end;
}
@@ -242,7 +238,7 @@
status = acpi_get_handle(dev->handle, "_EJ0", &temp);
if (ACPI_SUCCESS(status))
result = device_create_file(&dev->dev, &dev_attr_eject);
- end:
+end:
return result;
}
@@ -262,9 +258,9 @@
if (dev->flags.hardware_id || dev->flags.compatible_ids)
device_remove_file(&dev->dev, &dev_attr_modalias);
- if(dev->flags.hardware_id)
+ if (dev->flags.hardware_id)
device_remove_file(&dev->dev, &dev_attr_hid);
- if(dev->handle)
+ if (dev->handle)
device_remove_file(&dev->dev, &dev_attr_path);
}
/* --------------------------------------------------------------------------
@@ -512,7 +508,7 @@
break;
}
}
- if(!found) {
+ if (!found) {
acpi_device_bus_id = new_bus_id;
strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device");
acpi_device_bus_id->instance_no = 0;
@@ -530,22 +526,21 @@
if (device->parent)
device->dev.parent = &parent->dev;
device->dev.bus = &acpi_bus_type;
- device_initialize(&device->dev);
device->dev.release = &acpi_device_release;
- result = device_add(&device->dev);
- if(result) {
- dev_err(&device->dev, "Error adding device\n");
+ result = device_register(&device->dev);
+ if (result) {
+ dev_err(&device->dev, "Error registering device\n");
goto end;
}
result = acpi_device_setup_files(device);
- if(result)
+ if (result)
printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n",
dev_name(&device->dev));
device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
return 0;
- end:
+end:
mutex_lock(&acpi_device_lock);
if (device->parent)
list_del(&device->node);
@@ -577,7 +572,7 @@
* @device: the device to add and initialize
* @driver: driver for the device
*
- * Used to initialize a device via its device driver. Called whenever a
+ * Used to initialize a device via its device driver. Called whenever a
* driver is bound to a device. Invokes the driver's add() ops.
*/
static int
@@ -585,7 +580,6 @@
{
int result = 0;
-
if (!device || !driver)
return -EINVAL;
@@ -802,7 +796,7 @@
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- end:
+end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
return 0;
@@ -1070,7 +1064,7 @@
break;
}
- /*
+ /*
* \_SB
* ----
* Fix for the system root bus device -- the only root-level device.
@@ -1320,7 +1314,7 @@
device->parent->ops.bind(device);
}
- end:
+end:
if (!result)
*child = device;
else {
@@ -1464,7 +1458,6 @@
return result;
}
-
EXPORT_SYMBOL(acpi_bus_add);
int acpi_bus_start(struct acpi_device *device)
@@ -1484,7 +1477,6 @@
}
return result;
}
-
EXPORT_SYMBOL(acpi_bus_start);
int acpi_bus_trim(struct acpi_device *start, int rmdevice)
@@ -1542,7 +1534,6 @@
}
EXPORT_SYMBOL_GPL(acpi_bus_trim);
-
static int acpi_bus_scan_fixed(struct acpi_device *root)
{
int result = 0;
@@ -1610,6 +1601,6 @@
if (result)
acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
- Done:
+Done:
return result;
}
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 1bdfb37..8851315 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -76,6 +76,7 @@
static int brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
+static int register_count = 0;
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
static int acpi_video_resume(struct acpi_device *device);
@@ -586,6 +587,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
},
},
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 7720",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
+ },
+ },
{}
};
@@ -976,6 +985,11 @@
device->backlight->props.max_brightness = device->brightness->count-3;
kfree(name);
+ result = sysfs_create_link(&device->backlight->dev.kobj,
+ &device->dev->dev.kobj, "device");
+ if (result)
+ printk(KERN_ERR PREFIX "Create sysfs link\n");
+
device->cdev = thermal_cooling_device_register("LCD",
device->dev, &video_cooling_ops);
if (IS_ERR(device->cdev))
@@ -1054,15 +1068,15 @@
static int acpi_video_bus_check(struct acpi_video_bus *video)
{
acpi_status status = -ENOENT;
- struct device *dev;
+ struct pci_dev *dev;
if (!video)
return -EINVAL;
- dev = acpi_get_physical_pci_device(video->device->handle);
+ dev = acpi_get_pci_dev(video->device->handle);
if (!dev)
return -ENODEV;
- put_device(dev);
+ pci_dev_put(dev);
/* Since there is no HID, CID and so on for VGA driver, we have
* to check well known required nodes.
@@ -1990,6 +2004,7 @@
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
+ sysfs_remove_link(&device->backlight->dev.kobj, "device");
backlight_device_unregister(device->backlight);
if (device->cdev) {
sysfs_remove_link(&device->dev->dev.kobj,
@@ -2318,6 +2333,13 @@
int acpi_video_register(void)
{
int result = 0;
+ if (register_count) {
+ /*
+ * if the function of acpi_video_register is already called,
+ * don't register the acpi_vide_bus again and return no error.
+ */
+ return 0;
+ }
acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
if (!acpi_video_dir)
@@ -2329,10 +2351,35 @@
return -ENODEV;
}
+ /*
+ * When the acpi_video_bus is loaded successfully, increase
+ * the counter reference.
+ */
+ register_count = 1;
+
return 0;
}
EXPORT_SYMBOL(acpi_video_register);
+void acpi_video_unregister(void)
+{
+ if (!register_count) {
+ /*
+ * If the acpi video bus is already unloaded, don't
+ * unload it again and return directly.
+ */
+ return;
+ }
+ acpi_bus_unregister_driver(&acpi_video_bus);
+
+ remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+
+ register_count = 0;
+
+ return;
+}
+EXPORT_SYMBOL(acpi_video_unregister);
+
/*
* This is kind of nasty. Hardware using Intel chipsets may require
* the video opregion code to be run first in order to initialise
@@ -2350,16 +2397,12 @@
return acpi_video_register();
}
-void acpi_video_exit(void)
+static void __exit acpi_video_exit(void)
{
-
- acpi_bus_unregister_driver(&acpi_video_bus);
-
- remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+ acpi_video_unregister();
return;
}
-EXPORT_SYMBOL(acpi_video_exit);
module_init(acpi_video_init);
module_exit(acpi_video_exit);
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 0973727..7cd2b63 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -10,7 +10,7 @@
* assinged
*
* After PCI devices are glued with ACPI devices
- * acpi_get_physical_pci_device() can be called to identify ACPI graphics
+ * acpi_get_pci_dev() can be called to identify ACPI graphics
* devices for which a real graphics card is plugged in
*
* Now acpi_video_get_capabilities() can be called to check which
@@ -36,6 +36,7 @@
#include <linux/acpi.h>
#include <linux/dmi.h>
+#include <linux/pci.h>
ACPI_MODULE_NAME("video");
#define _COMPONENT ACPI_VIDEO_COMPONENT
@@ -109,7 +110,7 @@
find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
{
long *cap = context;
- struct device *dev;
+ struct pci_dev *dev;
struct acpi_device *acpi_dev;
const struct acpi_device_id video_ids[] = {
@@ -120,10 +121,10 @@
return AE_OK;
if (!acpi_match_device_ids(acpi_dev, video_ids)) {
- dev = acpi_get_physical_pci_device(handle);
+ dev = acpi_get_pci_dev(handle);
if (!dev)
return AE_OK;
- put_device(dev);
+ pci_dev_put(dev);
*cap |= acpi_is_video_device(acpi_dev);
}
return AE_OK;
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index dc425e7..e4b4e88 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -419,7 +419,7 @@
return;
if (!suspend)
- acpi_video_exit();
+ acpi_video_unregister();
opregion->acpi->drdy = 0;
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index fbc63d5..eb15958 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -354,7 +354,7 @@
status = acpi_run_hpp(handle, hpp);
if (ACPI_SUCCESS(status))
break;
- if (acpi_root_bridge(handle))
+ if (acpi_is_root_bridge(handle))
break;
status = acpi_get_parent(handle, &phandle);
if (ACPI_FAILURE(status))
@@ -428,7 +428,7 @@
status = acpi_run_oshp(handle);
if (ACPI_SUCCESS(status))
goto got_one;
- if (acpi_root_bridge(handle))
+ if (acpi_is_root_bridge(handle))
break;
chandle = handle;
status = acpi_get_parent(chandle, &handle);
@@ -449,42 +449,6 @@
}
EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
-/* acpi_root_bridge - check to see if this acpi object is a root bridge
- *
- * @handle - the acpi object in question.
- */
-int acpi_root_bridge(acpi_handle handle)
-{
- acpi_status status;
- struct acpi_device_info *info;
- struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
- int i;
-
- status = acpi_get_object_info(handle, &buffer);
- if (ACPI_SUCCESS(status)) {
- info = buffer.pointer;
- if ((info->valid & ACPI_VALID_HID) &&
- !strcmp(PCI_ROOT_HID_STRING,
- info->hardware_id.value)) {
- kfree(buffer.pointer);
- return 1;
- }
- if (info->valid & ACPI_VALID_CID) {
- for (i=0; i < info->compatibility_id.count; i++) {
- if (!strcmp(PCI_ROOT_HID_STRING,
- info->compatibility_id.id[i].value)) {
- kfree(buffer.pointer);
- return 1;
- }
- }
- }
- kfree(buffer.pointer);
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(acpi_root_bridge);
-
-
static int is_ejectable(acpi_handle handle)
{
acpi_status status;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 3a6064bc..0cb0f83 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -678,18 +678,9 @@
static struct pci_dev * get_apic_pci_info(acpi_handle handle)
{
- struct acpi_pci_id id;
- struct pci_bus *bus;
struct pci_dev *dev;
- if (ACPI_FAILURE(acpi_get_pci_id(handle, &id)))
- return NULL;
-
- bus = pci_find_bus(id.segment, id.bus);
- if (!bus)
- return NULL;
-
- dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function));
+ dev = acpi_get_pci_dev(handle);
if (!dev)
return NULL;
@@ -1396,19 +1387,16 @@
/* Program resources in newly inserted bridge */
static int acpiphp_configure_bridge (acpi_handle handle)
{
- struct acpi_pci_id pci_id;
+ struct pci_dev *dev;
struct pci_bus *bus;
- if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) {
+ dev = acpi_get_pci_dev(handle);
+ if (!dev) {
err("cannot get PCI domain and bus number for bridge\n");
return -EINVAL;
}
- bus = pci_find_bus(pci_id.segment, pci_id.bus);
- if (!bus) {
- err("cannot find bus %d:%d\n",
- pci_id.segment, pci_id.bus);
- return -EINVAL;
- }
+
+ bus = dev->bus;
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
@@ -1416,6 +1404,7 @@
acpiphp_set_hpp_values(handle, bus);
pci_enable_bridges(bus);
acpiphp_configure_ioapics(handle);
+ pci_dev_put(dev);
return 0;
}
@@ -1631,7 +1620,7 @@
{
int *count = (int *)context;
- if (acpi_root_bridge(handle)) {
+ if (acpi_is_root_bridge(handle)) {
acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
handle_hotplug_event_bridge, NULL);
(*count)++;
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c682ac5..7232fe7 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -34,10 +34,27 @@
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
+config ACERHDF
+ tristate "Acer Aspire One temperature and fan driver"
+ depends on THERMAL && THERMAL_HWMON && ACPI
+ ---help---
+ This is a driver for Acer Aspire One netbooks. It allows to access
+ the temperature sensor and to control the fan.
+
+ After loading this driver the BIOS is still in control of the fan.
+ To let the kernel handle the fan, do:
+ echo -n enabled > /sys/class/thermal/thermal_zone0/mode
+
+ For more information about this driver see
+ <http://piie.net/files/acerhdf_README.txt>
+
+ If you have an Acer Aspire One netbook, say Y or M
+ here.
+
config ASUS_LAPTOP
- tristate "Asus Laptop Extras (EXPERIMENTAL)"
+ tristate "Asus Laptop Extras"
depends on ACPI
- depends on EXPERIMENTAL && !ACPI_ASUS
+ depends on !ACPI_ASUS
select LEDS_CLASS
select NEW_LEDS
select BACKLIGHT_CLASS_DEVICE
@@ -45,12 +62,12 @@
---help---
This is the new Linux driver for Asus laptops. It may also support some
MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
- standard ACPI events that go through /proc/acpi/events. It also adds
+ standard ACPI events and input events. It also adds
support for video output switching, LCD backlight control, Bluetooth and
Wlan control, and most importantly, allows you to blink those fancy LEDs.
For more information and a userspace daemon for handling the extra
- buttons see <http://acpi4asus.sf.net/>.
+ buttons see <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here.
@@ -342,7 +359,10 @@
select HWMON
---help---
This driver supports the Fn-Fx keys on Eee PC laptops.
- It also adds the ability to switch camera/wlan on/off.
+
+ It also gives access to some extra laptop functionalities like
+ Bluetooth, backlight and allows powering on/off some other
+ devices.
If you have an Eee PC laptop, say Y or M here.
@@ -369,7 +389,7 @@
any ACPI-WMI devices.
config ACPI_ASUS
- tristate "ASUS/Medion Laptop Extras"
+ tristate "ASUS/Medion Laptop Extras (DEPRECATED)"
depends on ACPI
select BACKLIGHT_CLASS_DEVICE
---help---
@@ -390,7 +410,7 @@
parameters.
More information and a userspace daemon for handling the extra buttons
- at <http://sourceforge.net/projects/acpi4asus/>.
+ at <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here. This
driver is still under development, so if your laptop is unsupported or
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e40c7bd..641b8bf 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
+obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
new file mode 100644
index 0000000..bdfee17
--- /dev/null
+++ b/drivers/platform/x86/acerhdf.c
@@ -0,0 +1,602 @@
+/*
+ * acerhdf - A driver which monitors the temperature
+ * of the aspire one netbook, turns on/off the fan
+ * as soon as the upper/lower threshold is reached.
+ *
+ * (C) 2009 - Peter Feuerer peter (a) piie.net
+ * http://piie.net
+ * 2009 Borislav Petkov <petkovbb@gmail.com>
+ *
+ * Inspired by and many thanks to:
+ * o acerfand - Rachel Greenham
+ * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com
+ * - Petr Tomasek tomasek (#) etf,cuni,cz
+ * - Carlos Corbacho cathectic (at) gmail.com
+ * o lkml - Matthew Garrett
+ * - Borislav Petkov
+ * - Andreas Mohr
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) "acerhdf: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/dmi.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/sched.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+
+/*
+ * The driver is started with "kernel mode off" by default. That means, the BIOS
+ * is still in control of the fan. In this mode the driver allows to read the
+ * temperature of the cpu and a userspace tool may take over control of the fan.
+ * If the driver is switched to "kernel mode" (e.g. via module parameter) the
+ * driver is in full control of the fan. If you want the module to be started in
+ * kernel mode by default, define the following:
+ */
+#undef START_IN_KERNEL_MODE
+
+#define DRV_VER "0.5.13"
+
+/*
+ * According to the Atom N270 datasheet,
+ * (http://download.intel.com/design/processor/datashts/320032.pdf) the
+ * CPU's optimal operating limits denoted in junction temperature as
+ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
+ * assume 89°C is critical temperature.
+ */
+#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_FAN_OFF 0
+#define ACERHDF_FAN_AUTO 1
+
+/*
+ * No matter what value the user puts into the fanon variable, turn on the fan
+ * at 80 degree Celsius to prevent hardware damage
+ */
+#define ACERHDF_MAX_FANON 80
+
+/*
+ * Maximum interval between two temperature checks is 15 seconds, as the die
+ * can get hot really fast under heavy load (plus we shouldn't forget about
+ * possible impact of _external_ aggressive sources such as heaters, sun etc.)
+ */
+#define ACERHDF_MAX_INTERVAL 15
+
+#ifdef START_IN_KERNEL_MODE
+static int kernelmode = 1;
+#else
+static int kernelmode;
+#endif
+
+static unsigned int interval = 10;
+static unsigned int fanon = 63;
+static unsigned int fanoff = 58;
+static unsigned int verbose;
+static unsigned int fanstate = ACERHDF_FAN_AUTO;
+static char force_bios[16];
+static unsigned int prev_interval;
+struct thermal_zone_device *thz_dev;
+struct thermal_cooling_device *cl_dev;
+struct platform_device *acerhdf_dev;
+
+module_param(kernelmode, uint, 0);
+MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
+module_param(interval, uint, 0600);
+MODULE_PARM_DESC(interval, "Polling interval of temperature check");
+module_param(fanon, uint, 0600);
+MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
+module_param(fanoff, uint, 0600);
+MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
+module_param(verbose, uint, 0600);
+MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
+module_param_string(force_bios, force_bios, 16, 0);
+MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+
+/* BIOS settings */
+struct bios_settings_t {
+ const char *vendor;
+ const char *version;
+ unsigned char fanreg;
+ unsigned char tempreg;
+ unsigned char fancmd[2]; /* fan off and auto commands */
+};
+
+/* Register addresses and values for different BIOS versions */
+static const struct bios_settings_t bios_tbl[] = {
+ {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+ {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+ {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+ {"", "", 0, 0, {0, 0} }
+};
+
+static const struct bios_settings_t *bios_cfg __read_mostly;
+
+
+static int acerhdf_get_temp(int *temp)
+{
+ u8 read_temp;
+
+ if (ec_read(bios_cfg->tempreg, &read_temp))
+ return -EINVAL;
+
+ *temp = read_temp;
+
+ return 0;
+}
+
+static int acerhdf_get_fanstate(int *state)
+{
+ u8 fan;
+ bool tmp;
+
+ if (ec_read(bios_cfg->fanreg, &fan))
+ return -EINVAL;
+
+ tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
+ *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+
+ return 0;
+}
+
+static void acerhdf_change_fanstate(int state)
+{
+ unsigned char cmd;
+
+ if (verbose)
+ pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
+ "OFF" : "ON");
+
+ if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
+ pr_err("invalid fan state %d requested, setting to auto!\n",
+ state);
+ state = ACERHDF_FAN_AUTO;
+ }
+
+ cmd = bios_cfg->fancmd[state];
+ fanstate = state;
+
+ ec_write(bios_cfg->fanreg, cmd);
+}
+
+static void acerhdf_check_param(struct thermal_zone_device *thermal)
+{
+ if (fanon > ACERHDF_MAX_FANON) {
+ pr_err("fanon temperature too high, set to %d\n",
+ ACERHDF_MAX_FANON);
+ fanon = ACERHDF_MAX_FANON;
+ }
+
+ if (kernelmode && prev_interval != interval) {
+ if (interval > ACERHDF_MAX_INTERVAL) {
+ pr_err("interval too high, set to %d\n",
+ ACERHDF_MAX_INTERVAL);
+ interval = ACERHDF_MAX_INTERVAL;
+ }
+ if (verbose)
+ pr_notice("interval changed to: %d\n",
+ interval);
+ thermal->polling_delay = interval*1000;
+ prev_interval = interval;
+ }
+}
+
+/*
+ * This is the thermal zone callback which does the delayed polling of the fan
+ * state. We do check /sysfs-originating settings here in acerhdf_check_param()
+ * as late as the polling interval is since we can't do that in the respective
+ * accessors of the module parameters.
+ */
+static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
+ unsigned long *t)
+{
+ int temp, err = 0;
+
+ acerhdf_check_param(thermal);
+
+ err = acerhdf_get_temp(&temp);
+ if (err)
+ return err;
+
+ if (verbose)
+ pr_notice("temp %d\n", temp);
+
+ *t = temp;
+ return 0;
+}
+
+static int acerhdf_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ /* if the cooling device is the one from acerhdf bind it */
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error binding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int acerhdf_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error unbinding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline void acerhdf_revert_to_bios_mode(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ kernelmode = 0;
+ if (thz_dev)
+ thz_dev->polling_delay = 0;
+ pr_notice("kernel mode fan control OFF\n");
+}
+static inline void acerhdf_enable_kernelmode(void)
+{
+ kernelmode = 1;
+
+ thz_dev->polling_delay = interval*1000;
+ thermal_zone_device_update(thz_dev);
+ pr_notice("kernel mode fan control ON\n");
+}
+
+static int acerhdf_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ if (verbose)
+ pr_notice("kernel mode fan control %d\n", kernelmode);
+
+ *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
+ : THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+/*
+ * set operation mode;
+ * enabled: the thermal layer of the kernel takes care about
+ * the temperature and the fan.
+ * disabled: the BIOS takes control of the fan.
+ */
+static int acerhdf_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
+ acerhdf_revert_to_bios_mode();
+ else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
+ acerhdf_enable_kernelmode();
+
+ return 0;
+}
+
+static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type *type)
+{
+ if (trip == 0)
+ *type = THERMAL_TRIP_ACTIVE;
+
+ return 0;
+}
+
+static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+ unsigned long *temp)
+{
+ if (trip == 0)
+ *temp = fanon;
+
+ return 0;
+}
+
+static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature)
+{
+ *temperature = ACERHDF_TEMP_CRIT;
+ return 0;
+}
+
+/* bind callback functions to thermalzone */
+struct thermal_zone_device_ops acerhdf_dev_ops = {
+ .bind = acerhdf_bind,
+ .unbind = acerhdf_unbind,
+ .get_temp = acerhdf_get_ec_temp,
+ .get_mode = acerhdf_get_mode,
+ .set_mode = acerhdf_set_mode,
+ .get_trip_type = acerhdf_get_trip_type,
+ .get_trip_temp = acerhdf_get_trip_temp,
+ .get_crit_temp = acerhdf_get_crit_temp,
+};
+
+
+/*
+ * cooling device callback functions
+ * get maximal fan cooling state
+ */
+static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = 1;
+
+ return 0;
+}
+
+static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ int err = 0, tmp;
+
+ err = acerhdf_get_fanstate(&tmp);
+ if (err)
+ return err;
+
+ *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
+ return 0;
+}
+
+/* change current fan state - is overwritten when running in kernel mode */
+static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ int cur_temp, cur_state, err = 0;
+
+ if (!kernelmode)
+ return 0;
+
+ err = acerhdf_get_temp(&cur_temp);
+ if (err) {
+ pr_err("error reading temperature, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ err = acerhdf_get_fanstate(&cur_state);
+ if (err) {
+ pr_err("error reading fan state, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ if (state == 0) {
+ /* turn fan off only if below fanoff temperature */
+ if ((cur_state == ACERHDF_FAN_AUTO) &&
+ (cur_temp < fanoff))
+ acerhdf_change_fanstate(ACERHDF_FAN_OFF);
+ } else {
+ if (cur_state == ACERHDF_FAN_OFF)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ }
+ return 0;
+
+err_out:
+ acerhdf_revert_to_bios_mode();
+ return -EINVAL;
+}
+
+/* bind fan callbacks to fan device */
+struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+ .get_max_state = acerhdf_get_max_state,
+ .get_cur_state = acerhdf_get_cur_state,
+ .set_cur_state = acerhdf_set_cur_state,
+};
+
+/* suspend / resume functionality */
+static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
+{
+ if (kernelmode)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+
+ if (verbose)
+ pr_notice("going suspend\n");
+
+ return 0;
+}
+
+static int acerhdf_resume(struct platform_device *device)
+{
+ if (verbose)
+ pr_notice("resuming\n");
+
+ return 0;
+}
+
+static int __devinit acerhdf_probe(struct platform_device *device)
+{
+ return 0;
+}
+
+static int acerhdf_remove(struct platform_device *device)
+{
+ return 0;
+}
+
+struct platform_driver acerhdf_drv = {
+ .driver = {
+ .name = "acerhdf",
+ .owner = THIS_MODULE,
+ },
+ .probe = acerhdf_probe,
+ .remove = acerhdf_remove,
+ .suspend = acerhdf_suspend,
+ .resume = acerhdf_resume,
+};
+
+
+/* check hardware */
+static int acerhdf_check_hardware(void)
+{
+ char const *vendor, *version, *product;
+ int i;
+
+ /* get BIOS data */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ version = dmi_get_system_info(DMI_BIOS_VERSION);
+ product = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
+
+ if (!force_bios[0]) {
+ if (strncmp(product, "AO", 2)) {
+ pr_err("no Aspire One hardware found\n");
+ return -EINVAL;
+ }
+ } else {
+ pr_info("forcing BIOS version: %s\n", version);
+ version = force_bios;
+ kernelmode = 0;
+ }
+
+ if (verbose)
+ pr_info("BIOS info: %s %s, product: %s\n",
+ vendor, version, product);
+
+ /* search BIOS version and vendor in BIOS settings table */
+ for (i = 0; bios_tbl[i].version[0]; i++) {
+ if (!strcmp(bios_tbl[i].vendor, vendor) &&
+ !strcmp(bios_tbl[i].version, version)) {
+ bios_cfg = &bios_tbl[i];
+ break;
+ }
+ }
+
+ if (!bios_cfg) {
+ pr_err("unknown (unsupported) BIOS version %s/%s, "
+ "please report, aborting!\n", vendor, version);
+ return -EINVAL;
+ }
+
+ /*
+ * if started with kernel mode off, prevent the kernel from switching
+ * off the fan
+ */
+ if (!kernelmode) {
+ pr_notice("Fan control off, to enable do:\n");
+ pr_notice("echo -n \"enabled\" > "
+ "/sys/class/thermal/thermal_zone0/mode\n");
+ }
+
+ return 0;
+}
+
+static int acerhdf_register_platform(void)
+{
+ int err = 0;
+
+ err = platform_driver_register(&acerhdf_drv);
+ if (err)
+ return err;
+
+ acerhdf_dev = platform_device_alloc("acerhdf", -1);
+ platform_device_add(acerhdf_dev);
+
+ return 0;
+}
+
+static void acerhdf_unregister_platform(void)
+{
+ if (!acerhdf_dev)
+ return;
+
+ platform_device_del(acerhdf_dev);
+ platform_driver_unregister(&acerhdf_drv);
+}
+
+static int acerhdf_register_thermal(void)
+{
+ cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
+ &acerhdf_cooling_ops);
+
+ if (IS_ERR(cl_dev))
+ return -EINVAL;
+
+ thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ &acerhdf_dev_ops, 0, 0, 0,
+ (kernelmode) ? interval*1000 : 0);
+ if (IS_ERR(thz_dev))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void acerhdf_unregister_thermal(void)
+{
+ if (cl_dev) {
+ thermal_cooling_device_unregister(cl_dev);
+ cl_dev = NULL;
+ }
+
+ if (thz_dev) {
+ thermal_zone_device_unregister(thz_dev);
+ thz_dev = NULL;
+ }
+}
+
+static int __init acerhdf_init(void)
+{
+ int err = 0;
+
+ err = acerhdf_check_hardware();
+ if (err)
+ goto out_err;
+
+ err = acerhdf_register_platform();
+ if (err)
+ goto err_unreg;
+
+ err = acerhdf_register_thermal();
+ if (err)
+ goto err_unreg;
+
+ return 0;
+
+err_unreg:
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+
+out_err:
+ return -ENODEV;
+}
+
+static void __exit acerhdf_exit(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Feuerer");
+MODULE_DESCRIPTION("Aspire One temperature and fan driver");
+MODULE_ALIAS("dmi:*:*Acer*:*:");
+MODULE_ALIAS("dmi:*:*Gateway*:*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:*:");
+
+module_init(acerhdf_init);
+module_exit(acerhdf_exit);
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index bfc1a88..db657bb 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -33,6 +33,8 @@
* Sam Lin - GPS support
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -53,9 +55,10 @@
#define ASUS_HOTK_NAME "Asus Laptop Support"
#define ASUS_HOTK_CLASS "hotkey"
#define ASUS_HOTK_DEVICE_NAME "Hotkey"
-#define ASUS_HOTK_FILE "asus-laptop"
+#define ASUS_HOTK_FILE KBUILD_MODNAME
#define ASUS_HOTK_PREFIX "\\_SB.ATKD."
+
/*
* Some events we use, same for all Asus
*/
@@ -207,13 +210,17 @@
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
+static void asus_hotk_notify(struct acpi_device *device, u32 event);
+
static struct acpi_driver asus_hotk_driver = {
.name = ASUS_HOTK_NAME,
.class = ASUS_HOTK_CLASS,
.ids = asus_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
+ .notify = asus_hotk_notify,
},
};
@@ -323,7 +330,7 @@
rv = acpi_evaluate_integer(wireless_status_handle, NULL, NULL, &status);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading Wireless status\n");
+ pr_warning("Error reading Wireless status\n");
else
return (status & mask) ? 1 : 0;
@@ -337,7 +344,7 @@
rv = acpi_evaluate_integer(gps_status_handle, NULL, NULL, &status);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading GPS status\n");
+ pr_warning("Error reading GPS status\n");
else
return status ? 1 : 0;
@@ -377,7 +384,7 @@
}
if (write_acpi_int(handle, NULL, out, NULL))
- printk(ASUS_WARNING " write failed %x\n", mask);
+ pr_warning(" write failed %x\n", mask);
}
/* /sys/class/led handlers */
@@ -420,7 +427,7 @@
NULL, NULL, NULL);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Error switching LCD\n");
+ pr_warning("Error switching LCD\n");
}
write_status(NULL, lcd, LCD_ON);
@@ -444,7 +451,7 @@
rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading brightness\n");
+ pr_warning("Error reading brightness\n");
return value;
}
@@ -457,7 +464,7 @@
/* 0 <= value <= 15 */
if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
- printk(ASUS_WARNING "Error changing brightness\n");
+ pr_warning("Error changing brightness\n");
ret = -EIO;
}
@@ -587,7 +594,7 @@
rv = parse_arg(buf, count, &value);
if (rv > 0) {
if (write_acpi_int(ledd_set_handle, NULL, value, NULL))
- printk(ASUS_WARNING "LED display write failed\n");
+ pr_warning("LED display write failed\n");
else
hotk->ledd_status = (u32) value;
}
@@ -632,7 +639,7 @@
{
/* no sanity check needed for now */
if (write_acpi_int(display_set_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting display\n");
+ pr_warning("Error setting display\n");
return;
}
@@ -647,7 +654,7 @@
rv = acpi_evaluate_integer(display_get_handle, NULL,
NULL, &value);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading display status\n");
+ pr_warning("Error reading display status\n");
}
value &= 0x0F; /* needed for some models, shouldn't hurt others */
@@ -689,7 +696,7 @@
static void set_light_sens_switch(int value)
{
if (write_acpi_int(ls_switch_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting light sensor switch\n");
+ pr_warning("Error setting light sensor switch\n");
hotk->light_switch = value;
}
@@ -714,7 +721,7 @@
static void set_light_sens_level(int value)
{
if (write_acpi_int(ls_level_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting light sensor level\n");
+ pr_warning("Error setting light sensor level\n");
hotk->light_level = value;
}
@@ -812,7 +819,7 @@
return -EINVAL;
}
-static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+static void asus_hotk_notify(struct acpi_device *device, u32 event)
{
static struct key_entry *key;
u16 count;
@@ -975,11 +982,11 @@
*/
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Couldn't get the DSDT table header\n");
+ pr_warning("Couldn't get the DSDT table header\n");
/* We have to write 0 on init this far for all ASUS models */
if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
- printk(ASUS_ERR "Hotkey initialization failed\n");
+ pr_err("Hotkey initialization failed\n");
return -ENODEV;
}
@@ -987,9 +994,9 @@
status =
acpi_evaluate_integer(hotk->handle, "BSTS", NULL, &bsts_result);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Error calling BSTS\n");
+ pr_warning("Error calling BSTS\n");
else if (bsts_result)
- printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n",
+ pr_notice("BSTS called, 0x%02x returned\n",
(uint) bsts_result);
/* This too ... */
@@ -1020,7 +1027,7 @@
return -ENOMEM;
if (*string)
- printk(ASUS_NOTICE " %s model detected\n", string);
+ pr_notice(" %s model detected\n", string);
ASUS_HANDLE_INIT(mled_set);
ASUS_HANDLE_INIT(tled_set);
@@ -1077,7 +1084,7 @@
hotk->inputdev = input_allocate_device();
if (!hotk->inputdev) {
- printk(ASUS_INFO "Unable to allocate input device\n");
+ pr_info("Unable to allocate input device\n");
return 0;
}
hotk->inputdev->name = "Asus Laptop extra buttons";
@@ -1096,7 +1103,7 @@
}
result = input_register_device(hotk->inputdev);
if (result) {
- printk(ASUS_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
input_free_device(hotk->inputdev);
}
return result;
@@ -1113,7 +1120,7 @@
if (hotk->device->status.present) {
result = asus_hotk_get_info();
} else {
- printk(ASUS_ERR "Hotkey device not present, aborting\n");
+ pr_err("Hotkey device not present, aborting\n");
return -EINVAL;
}
@@ -1124,13 +1131,12 @@
static int asus_hotk_add(struct acpi_device *device)
{
- acpi_status status = AE_OK;
int result;
if (!device)
return -EINVAL;
- printk(ASUS_NOTICE "Asus Laptop Support version %s\n",
+ pr_notice("Asus Laptop Support version %s\n",
ASUS_LAPTOP_VERSION);
hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
@@ -1149,15 +1155,6 @@
asus_hotk_add_fs();
- /*
- * We install the handler, it will receive the hotk in parameter, so, we
- * could add other data to the hotk struct
- */
- status = acpi_install_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
- asus_hotk_notify, hotk);
- if (ACPI_FAILURE(status))
- printk(ASUS_ERR "Error installing notify handler\n");
-
asus_hotk_found = 1;
/* WLED and BLED are on by default */
@@ -1198,16 +1195,9 @@
static int asus_hotk_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
- asus_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(ASUS_ERR "Error removing notify handler\n");
-
kfree(hotk->name);
kfree(hotk);
@@ -1260,8 +1250,7 @@
bd = backlight_device_register(ASUS_HOTK_FILE, dev,
NULL, &asusbl_ops);
if (IS_ERR(bd)) {
- printk(ASUS_ERR
- "Could not register asus backlight device\n");
+ pr_err("Could not register asus backlight device\n");
asus_backlight_device = NULL;
return PTR_ERR(bd);
}
@@ -1334,7 +1323,6 @@
static int __init asus_laptop_init(void)
{
- struct device *dev;
int result;
if (acpi_disabled)
@@ -1356,24 +1344,10 @@
return -ENODEV;
}
- dev = acpi_get_physical_device(hotk->device->handle);
-
- if (!acpi_video_backlight_support()) {
- result = asus_backlight_init(dev);
- if (result)
- goto fail_backlight;
- } else
- printk(ASUS_INFO "Brightness ignored, must be controlled by "
- "ACPI video driver\n");
-
result = asus_input_init();
if (result)
goto fail_input;
- result = asus_led_init(dev);
- if (result)
- goto fail_led;
-
/* Register platform stuff */
result = platform_driver_register(&asuspf_driver);
if (result)
@@ -1394,8 +1368,27 @@
if (result)
goto fail_sysfs;
+ result = asus_led_init(&asuspf_device->dev);
+ if (result)
+ goto fail_led;
+
+ if (!acpi_video_backlight_support()) {
+ result = asus_backlight_init(&asuspf_device->dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ pr_info("Brightness ignored, must be controlled by "
+ "ACPI video driver\n");
+
return 0;
+fail_backlight:
+ asus_led_exit();
+
+fail_led:
+ sysfs_remove_group(&asuspf_device->dev.kobj,
+ &asuspf_attribute_group);
+
fail_sysfs:
platform_device_del(asuspf_device);
@@ -1406,15 +1399,9 @@
platform_driver_unregister(&asuspf_driver);
fail_platform_driver:
- asus_led_exit();
-
-fail_led:
asus_input_exit();
fail_input:
- asus_backlight_exit();
-
-fail_backlight:
return result;
}
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index ba1f749..ddf5240 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -455,6 +455,8 @@
*/
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
+static void asus_hotk_notify(struct acpi_device *device, u32 event);
+
static const struct acpi_device_id asus_device_ids[] = {
{"ATK0100", 0},
{"", 0},
@@ -465,9 +467,11 @@
.name = "asus_acpi",
.class = ACPI_HOTK_CLASS,
.ids = asus_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
+ .notify = asus_hotk_notify,
},
};
@@ -1101,12 +1105,20 @@
return 0;
}
-static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+static void asus_hotk_notify(struct acpi_device *device, u32 event)
{
/* TODO Find a better way to handle events count. */
if (!hotk)
return;
+ /*
+ * The BIOS *should* be sending us device events, but apparently
+ * Asus uses system events instead, so just ignore any device
+ * events we get.
+ */
+ if (event > ACPI_MAX_SYS_NOTIFY)
+ return;
+
if ((event & ~((u32) BR_UP)) < 16)
hotk->brightness = (event & ~((u32) BR_UP));
else if ((event & ~((u32) BR_DOWN)) < 16)
@@ -1346,15 +1358,6 @@
if (result)
goto end;
- /*
- * We install the handler, it will receive the hotk in parameter, so, we
- * could add other data to the hotk struct
- */
- status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
- asus_hotk_notify, hotk);
- if (ACPI_FAILURE(status))
- printk(KERN_ERR " Error installing notify handler\n");
-
/* For laptops without GPLV: init the hotk->brightness value */
if ((!hotk->methods->brightness_get)
&& (!hotk->methods->brightness_status)
@@ -1389,16 +1392,9 @@
static int asus_hotk_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
- asus_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(KERN_ERR "Asus ACPI: Error removing notify handler\n");
-
asus_hotk_remove_fs(device);
kfree(hotk);
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 2fab941..0f900cc 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -46,10 +46,53 @@
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_SW, KE_IGNORE, KE_END };
+
+/*
+ * Certain keys are flagged as KE_IGNORE. All of these are either
+ * notifications (rather than requests for change) or are also sent
+ * via the keyboard controller so should not be sent again.
+ */
static struct key_entry dell_wmi_keymap[] = {
{KE_KEY, 0xe045, KEY_PROG1},
+ {KE_KEY, 0xe009, KEY_EJECTCD},
+
+ /* These also contain the brightness level at offset 6 */
+ {KE_KEY, 0xe006, KEY_BRIGHTNESSUP},
+ {KE_KEY, 0xe005, KEY_BRIGHTNESSDOWN},
+
+ /* Battery health status button */
+ {KE_KEY, 0xe007, KEY_BATTERY},
+
+ /* This is actually for all radios. Although physically a
+ * switch, the notification does not provide an indication of
+ * state and so it should be reported as a key */
+ {KE_KEY, 0xe008, KEY_WLAN},
+
+ /* The next device is at offset 6, the active devices are at
+ offset 8 and the attached devices at offset 10 */
+ {KE_KEY, 0xe00b, KEY_DISPLAYTOGGLE},
+
+ {KE_IGNORE, 0xe00c, KEY_KBDILLUMTOGGLE},
+
+ /* BIOS error detected */
+ {KE_IGNORE, 0xe00d, KEY_RESERVED},
+
+ /* Wifi Catcher */
+ {KE_KEY, 0xe011, KEY_PROG2},
+
+ /* Ambient light sensor toggle */
+ {KE_IGNORE, 0xe013, KEY_RESERVED},
+
+ {KE_IGNORE, 0xe020, KEY_MUTE},
+ {KE_IGNORE, 0xe02e, KEY_VOLUMEDOWN},
+ {KE_IGNORE, 0xe030, KEY_VOLUMEUP},
+ {KE_IGNORE, 0xe033, KEY_KBDILLUMUP},
+ {KE_IGNORE, 0xe034, KEY_KBDILLUMDOWN},
+ {KE_IGNORE, 0xe03a, KEY_CAPSLOCK},
+ {KE_IGNORE, 0xe045, KEY_NUMLOCK},
+ {KE_IGNORE, 0xe046, KEY_SCROLLLOCK},
{KE_END, 0}
};
@@ -122,15 +165,20 @@
if (obj && obj->type == ACPI_TYPE_BUFFER) {
int *buffer = (int *)obj->buffer.pointer;
- key = dell_wmi_get_entry_by_scancode(buffer[1]);
+ /*
+ * The upper bytes of the event may contain
+ * additional information, so mask them off for the
+ * scancode lookup
+ */
+ key = dell_wmi_get_entry_by_scancode(buffer[1] & 0xFFFF);
if (key) {
input_report_key(dell_wmi_input_dev, key->keycode, 1);
input_sync(dell_wmi_input_dev);
input_report_key(dell_wmi_input_dev, key->keycode, 0);
input_sync(dell_wmi_input_dev);
- } else
+ } else if (buffer[1] & 0xFFFF)
printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n",
- buffer[1]);
+ buffer[1] & 0xFFFF);
}
}
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 8153b3e..4207b26 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -62,7 +62,10 @@
DISABLE_ASL_GPS = 0x0020,
DISABLE_ASL_DISPLAYSWITCH = 0x0040,
DISABLE_ASL_MODEM = 0x0080,
- DISABLE_ASL_CARDREADER = 0x0100
+ DISABLE_ASL_CARDREADER = 0x0100,
+ DISABLE_ASL_3G = 0x0200,
+ DISABLE_ASL_WIMAX = 0x0400,
+ DISABLE_ASL_HWCF = 0x0800
};
enum {
@@ -87,7 +90,13 @@
CM_ASL_USBPORT3,
CM_ASL_MODEM,
CM_ASL_CARDREADER,
- CM_ASL_LID
+ CM_ASL_3G,
+ CM_ASL_WIMAX,
+ CM_ASL_HWCF,
+ CM_ASL_LID,
+ CM_ASL_TYPE,
+ CM_ASL_PANELPOWER, /*P901*/
+ CM_ASL_TPD
};
static const char *cm_getv[] = {
@@ -96,7 +105,8 @@
NULL, "PBLG", NULL, NULL,
"CFVG", NULL, NULL, NULL,
"USBG", NULL, NULL, "MODG",
- "CRDG", "LIDG"
+ "CRDG", "M3GG", "WIMG", "HWCF",
+ "LIDG", "TYPE", "PBPG", "TPDG"
};
static const char *cm_setv[] = {
@@ -105,7 +115,8 @@
"SDSP", "PBLS", "HDPS", NULL,
"CFVS", NULL, NULL, NULL,
"USBG", NULL, NULL, "MODS",
- "CRDS", NULL
+ "CRDS", "M3GS", "WIMS", NULL,
+ NULL, NULL, "PBPS", "TPDS"
};
#define EEEPC_EC "\\_SB.PCI0.SBRG.EC0."
@@ -181,6 +192,7 @@
static int eeepc_hotk_add(struct acpi_device *device);
static int eeepc_hotk_remove(struct acpi_device *device, int type);
static int eeepc_hotk_resume(struct acpi_device *device);
+static void eeepc_hotk_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id eeepc_device_ids[] = {
{EEEPC_HOTK_HID, 0},
@@ -192,10 +204,12 @@
.name = EEEPC_HOTK_NAME,
.class = EEEPC_HOTK_CLASS,
.ids = eeepc_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = eeepc_hotk_add,
.remove = eeepc_hotk_remove,
.resume = eeepc_hotk_resume,
+ .notify = eeepc_hotk_notify,
},
};
@@ -318,6 +332,15 @@
.set_block = eeepc_rfkill_set,
};
+static void __init eeepc_enable_camera(void)
+{
+ /*
+ * If the following call to set_acpi() fails, it's because there's no
+ * camera so we can ignore the error.
+ */
+ set_acpi(CM_ASL_CAMERA, 1);
+}
+
/*
* Sys helpers
*/
@@ -369,13 +392,88 @@
EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
-EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV);
+
+struct eeepc_cpufv {
+ int num;
+ int cur;
+};
+
+static int get_cpufv(struct eeepc_cpufv *c)
+{
+ c->cur = get_acpi(CM_ASL_CPUFV);
+ c->num = (c->cur >> 8) & 0xff;
+ c->cur &= 0xff;
+ if (c->cur < 0 || c->num <= 0 || c->num > 12)
+ return -ENODEV;
+ return 0;
+}
+
+static ssize_t show_available_cpufv(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct eeepc_cpufv c;
+ int i;
+ ssize_t len = 0;
+
+ if (get_cpufv(&c))
+ return -ENODEV;
+ for (i = 0; i < c.num; i++)
+ len += sprintf(buf + len, "%d ", i);
+ len += sprintf(buf + len, "\n");
+ return len;
+}
+
+static ssize_t show_cpufv(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct eeepc_cpufv c;
+
+ if (get_cpufv(&c))
+ return -ENODEV;
+ return sprintf(buf, "%#x\n", (c.num << 8) | c.cur);
+}
+
+static ssize_t store_cpufv(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct eeepc_cpufv c;
+ int rv, value;
+
+ if (get_cpufv(&c))
+ return -ENODEV;
+ rv = parse_arg(buf, count, &value);
+ if (rv < 0)
+ return rv;
+ if (!rv || value < 0 || value >= c.num)
+ return -EINVAL;
+ set_acpi(CM_ASL_CPUFV, value);
+ return rv;
+}
+
+static struct device_attribute dev_attr_cpufv = {
+ .attr = {
+ .name = "cpufv",
+ .mode = 0644 },
+ .show = show_cpufv,
+ .store = store_cpufv
+};
+
+static struct device_attribute dev_attr_available_cpufv = {
+ .attr = {
+ .name = "available_cpufv",
+ .mode = 0444 },
+ .show = show_available_cpufv
+};
static struct attribute *platform_attributes[] = {
&dev_attr_camera.attr,
&dev_attr_cardr.attr,
&dev_attr_disp.attr,
&dev_attr_cpufv.attr,
+ &dev_attr_available_cpufv.attr,
NULL
};
@@ -558,7 +656,7 @@
eeepc_rfkill_hotplug();
}
-static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
+static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
{
static struct key_entry *key;
u16 count;
@@ -566,6 +664,8 @@
if (!ehotk)
return;
+ if (event > ACPI_MAX_SYS_NOTIFY)
+ return;
if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
brn = notify_brn();
count = ehotk->event_count[event % 128]++;
@@ -646,7 +746,6 @@
static int eeepc_hotk_add(struct acpi_device *device)
{
- acpi_status status = AE_OK;
int result;
if (!device)
@@ -664,10 +763,6 @@
result = eeepc_hotk_check();
if (result)
goto ehotk_fail;
- status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
- eeepc_hotk_notify, ehotk);
- if (ACPI_FAILURE(status))
- printk(EEEPC_ERR "Error installing notify handler\n");
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
@@ -725,14 +820,8 @@
static int eeepc_hotk_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
- eeepc_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(EEEPC_ERR "Error removing notify handler\n");
eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
@@ -989,6 +1078,9 @@
result = eeepc_hwmon_init(dev);
if (result)
goto fail_hwmon;
+
+ eeepc_enable_camera();
+
/* Register platform stuff */
result = platform_driver_register(&platform_driver);
if (result)
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 16fffe44..4ac2311 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -47,7 +47,7 @@
#define HPWMI_DISPLAY_QUERY 0x1
#define HPWMI_HDDTEMP_QUERY 0x2
#define HPWMI_ALS_QUERY 0x3
-#define HPWMI_DOCK_QUERY 0x4
+#define HPWMI_HARDWARE_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
#define HPWMI_HOTKEY_QUERY 0xc
@@ -75,10 +75,9 @@
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_END };
static struct key_entry hp_wmi_keymap[] = {
- {KE_SW, 0x01, SW_DOCK},
{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
{KE_KEY, 0x20e6, KEY_PROG1},
@@ -151,7 +150,22 @@
static int hp_wmi_dock_state(void)
{
- return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return ret & 0x1;
+}
+
+static int hp_wmi_tablet_state(void)
+{
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return (ret & 0x4) ? 1 : 0;
}
static int hp_wmi_set_block(void *data, bool blocked)
@@ -232,6 +246,15 @@
return sprintf(buf, "%d\n", value);
}
+static ssize_t show_tablet(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int value = hp_wmi_tablet_state();
+ if (value < 0)
+ return -EINVAL;
+ return sprintf(buf, "%d\n", value);
+}
+
static ssize_t set_als(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -244,6 +267,7 @@
static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL);
static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
+static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
{
@@ -326,13 +350,13 @@
key->keycode, 0);
input_sync(hp_wmi_input_dev);
break;
- case KE_SW:
- input_report_switch(hp_wmi_input_dev,
- key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
+ } else if (eventcode == 0x1) {
+ input_report_switch(hp_wmi_input_dev, SW_DOCK,
+ hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
} else if (eventcode == 0x5) {
if (wifi_rfkill)
rfkill_set_sw_state(wifi_rfkill,
@@ -369,18 +393,19 @@
set_bit(EV_KEY, hp_wmi_input_dev->evbit);
set_bit(key->keycode, hp_wmi_input_dev->keybit);
break;
- case KE_SW:
- set_bit(EV_SW, hp_wmi_input_dev->evbit);
- set_bit(key->keycode, hp_wmi_input_dev->swbit);
-
- /* Set initial dock state */
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
}
+ set_bit(EV_SW, hp_wmi_input_dev->evbit);
+ set_bit(SW_DOCK, hp_wmi_input_dev->swbit);
+ set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
+
+ /* Set initial hardware state */
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
+
err = input_register_device(hp_wmi_input_dev);
if (err) {
@@ -397,6 +422,7 @@
device_remove_file(&device->dev, &dev_attr_hddtemp);
device_remove_file(&device->dev, &dev_attr_als);
device_remove_file(&device->dev, &dev_attr_dock);
+ device_remove_file(&device->dev, &dev_attr_tablet);
}
static int __init hp_wmi_bios_setup(struct platform_device *device)
@@ -416,6 +442,9 @@
err = device_create_file(&device->dev, &dev_attr_dock);
if (err)
goto add_sysfs_error;
+ err = device_create_file(&device->dev, &dev_attr_tablet);
+ if (err)
+ goto add_sysfs_error;
if (wireless & 0x1) {
wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
@@ -485,23 +514,17 @@
static int hp_wmi_resume_handler(struct platform_device *device)
{
- struct key_entry *key;
-
/*
- * Docking state may have changed while suspended, so trigger
- * an input event for the current state. As this is a switch,
+ * Hardware state may have changed while suspended, so trigger
+ * input events for the current state. As this is a switch,
* the input layer will only actually pass it on if the state
* changed.
*/
- for (key = hp_wmi_keymap; key->type != KE_END; key++) {
- switch (key->type) {
- case KE_SW:
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
- }
- }
+
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
return 0;
}
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 40d64c0..a463fd7 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -22,7 +22,7 @@
*/
#define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020300
+#define TPACPI_SYSFS_VERSION 0x020400
/*
* Changelog:
@@ -257,6 +257,8 @@
u32 wan:1;
u32 uwb:1;
u32 fan_ctrl_status_undef:1;
+ u32 second_fan:1;
+ u32 beep_needs_two_args:1;
u32 input_device_registered:1;
u32 platform_drv_registered:1;
u32 platform_drv_attrs_registered:1;
@@ -277,8 +279,10 @@
char *bios_version_str; /* Something like 1ZET51WW (1.03z) */
char *ec_version_str; /* Something like 1ZHT51WW-1.04a */
- u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */
+ u16 bios_model; /* 1Y = 0x5931, 0 = unknown */
u16 ec_model;
+ u16 bios_release; /* 1ZETK1WW = 0x314b, 0 = unknown */
+ u16 ec_release;
char *model_str; /* ThinkPad T43 */
char *nummodel_str; /* 9384A9C for a 9384-A9C model */
@@ -355,6 +359,73 @@
} \
} while (0)
+/*
+ * Quirk handling helpers
+ *
+ * ThinkPad IDs and versions seen in the field so far
+ * are two-characters from the set [0-9A-Z], i.e. base 36.
+ *
+ * We use values well outside that range as specials.
+ */
+
+#define TPACPI_MATCH_ANY 0xffffU
+#define TPACPI_MATCH_UNKNOWN 0U
+
+/* TPID('1', 'Y') == 0x5931 */
+#define TPID(__c1, __c2) (((__c2) << 8) | (__c1))
+
+#define TPACPI_Q_IBM(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+#define TPACPI_Q_LNV(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+struct tpacpi_quirk {
+ unsigned int vendor;
+ u16 bios;
+ u16 ec;
+ unsigned long quirks;
+};
+
+/**
+ * tpacpi_check_quirks() - search BIOS/EC version on a list
+ * @qlist: array of &struct tpacpi_quirk
+ * @qlist_size: number of elements in @qlist
+ *
+ * Iterates over a quirks list until one is found that matches the
+ * ThinkPad's vendor, BIOS and EC model.
+ *
+ * Returns 0 if nothing matches, otherwise returns the quirks field of
+ * the matching &struct tpacpi_quirk entry.
+ *
+ * The match criteria is: vendor, ec and bios much match.
+ */
+static unsigned long __init tpacpi_check_quirks(
+ const struct tpacpi_quirk *qlist,
+ unsigned int qlist_size)
+{
+ while (qlist_size) {
+ if ((qlist->vendor == thinkpad_id.vendor ||
+ qlist->vendor == TPACPI_MATCH_ANY) &&
+ (qlist->bios == thinkpad_id.bios_model ||
+ qlist->bios == TPACPI_MATCH_ANY) &&
+ (qlist->ec == thinkpad_id.ec_model ||
+ qlist->ec == TPACPI_MATCH_ANY))
+ return qlist->quirks;
+
+ qlist_size--;
+ qlist++;
+ }
+ return 0;
+}
+
+
/****************************************************************************
****************************************************************************
*
@@ -2880,7 +2951,7 @@
/* update bright_acpimode... */
tpacpi_check_std_acpi_brightness_support();
- if (tp_features.bright_acpimode) {
+ if (tp_features.bright_acpimode && acpi_video_backlight_support()) {
printk(TPACPI_INFO
"This ThinkPad has standard ACPI backlight "
"brightness control, supported by the ACPI "
@@ -4773,7 +4844,7 @@
"LED", /* all others */
); /* R30, R31 */
-#define TPACPI_LED_NUMLEDS 8
+#define TPACPI_LED_NUMLEDS 16
static struct tpacpi_led_classdev *tpacpi_leds;
static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
@@ -4786,15 +4857,20 @@
"tpacpi::dock_batt",
"tpacpi::unknown_led",
"tpacpi::standby",
+ "tpacpi::dock_status1",
+ "tpacpi::dock_status2",
+ "tpacpi::unknown_led2",
+ "tpacpi::unknown_led3",
+ "tpacpi::thinkvantage",
};
-#define TPACPI_SAFE_LEDS 0x0081U
+#define TPACPI_SAFE_LEDS 0x1081U
static inline bool tpacpi_is_led_restricted(const unsigned int led)
{
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
return false;
#else
- return (TPACPI_SAFE_LEDS & (1 << led)) == 0;
+ return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
#endif
}
@@ -4956,6 +5032,10 @@
tpacpi_leds[led].led = led;
+ /* LEDs with no name don't get registered */
+ if (!tpacpi_led_names[led])
+ return 0;
+
tpacpi_leds[led].led_classdev.brightness_set = &led_sysfs_set;
tpacpi_leds[led].led_classdev.blink_set = &led_sysfs_blink_set;
if (led_supported == TPACPI_LED_570)
@@ -4974,10 +5054,59 @@
return rc;
}
+static const struct tpacpi_quirk led_useful_qtable[] __initconst = {
+ TPACPI_Q_IBM('1', 'E', 0x009f), /* A30 */
+ TPACPI_Q_IBM('1', 'N', 0x009f), /* A31 */
+ TPACPI_Q_IBM('1', 'G', 0x009f), /* A31 */
+
+ TPACPI_Q_IBM('1', 'I', 0x0097), /* T30 */
+ TPACPI_Q_IBM('1', 'R', 0x0097), /* T40, T41, T42, R50, R51 */
+ TPACPI_Q_IBM('7', '0', 0x0097), /* T43, R52 */
+ TPACPI_Q_IBM('1', 'Y', 0x0097), /* T43 */
+ TPACPI_Q_IBM('1', 'W', 0x0097), /* R50e */
+ TPACPI_Q_IBM('1', 'V', 0x0097), /* R51 */
+ TPACPI_Q_IBM('7', '8', 0x0097), /* R51e */
+ TPACPI_Q_IBM('7', '6', 0x0097), /* R52 */
+
+ TPACPI_Q_IBM('1', 'K', 0x00bf), /* X30 */
+ TPACPI_Q_IBM('1', 'Q', 0x00bf), /* X31, X32 */
+ TPACPI_Q_IBM('1', 'U', 0x00bf), /* X40 */
+ TPACPI_Q_IBM('7', '4', 0x00bf), /* X41 */
+ TPACPI_Q_IBM('7', '5', 0x00bf), /* X41t */
+
+ TPACPI_Q_IBM('7', '9', 0x1f97), /* T60 (1) */
+ TPACPI_Q_IBM('7', '7', 0x1f97), /* Z60* (1) */
+ TPACPI_Q_IBM('7', 'F', 0x1f97), /* Z61* (1) */
+ TPACPI_Q_IBM('7', 'B', 0x1fb7), /* X60 (1) */
+
+ /* (1) - may have excess leds enabled on MSB */
+
+ /* Defaults (order matters, keep last, don't reorder!) */
+ { /* Lenovo */
+ .vendor = PCI_VENDOR_ID_LENOVO,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x1fffU,
+ },
+ { /* IBM ThinkPads with no EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_UNKNOWN,
+ .quirks = 0x00ffU,
+ },
+ { /* IBM ThinkPads with EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x00bfU,
+ },
+};
+
+#undef TPACPI_LEDQ_IBM
+#undef TPACPI_LEDQ_LNV
+
static int __init led_init(struct ibm_init_struct *iibm)
{
unsigned int i;
int rc;
+ unsigned long useful_leds;
vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
@@ -4999,6 +5128,9 @@
vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
str_supported(led_supported), led_supported);
+ if (led_supported == TPACPI_LED_NONE)
+ return 1;
+
tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
GFP_KERNEL);
if (!tpacpi_leds) {
@@ -5006,8 +5138,12 @@
return -ENOMEM;
}
+ useful_leds = tpacpi_check_quirks(led_useful_qtable,
+ ARRAY_SIZE(led_useful_qtable));
+
for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
- if (!tpacpi_is_led_restricted(i)) {
+ if (!tpacpi_is_led_restricted(i) &&
+ test_bit(i, &useful_leds)) {
rc = tpacpi_init_led(i);
if (rc < 0) {
led_exit();
@@ -5017,12 +5153,11 @@
}
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
- if (led_supported != TPACPI_LED_NONE)
- printk(TPACPI_NOTICE
- "warning: userspace override of important "
- "firmware LEDs is enabled\n");
+ printk(TPACPI_NOTICE
+ "warning: userspace override of important "
+ "firmware LEDs is enabled\n");
#endif
- return (led_supported != TPACPI_LED_NONE)? 0 : 1;
+ return 0;
}
#define str_led_status(s) \
@@ -5052,7 +5187,7 @@
}
len += sprintf(p + len, "commands:\t"
- "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
+ "<led> on, <led> off, <led> blink (<led> is 0-15)\n");
return len;
}
@@ -5067,7 +5202,7 @@
return -ENODEV;
while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
+ if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 15)
return -EINVAL;
if (strstr(cmd, "off")) {
@@ -5101,8 +5236,17 @@
TPACPI_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
+#define TPACPI_BEEP_Q1 0x0001
+
+static const struct tpacpi_quirk beep_quirk_table[] __initconst = {
+ TPACPI_Q_IBM('I', 'M', TPACPI_BEEP_Q1), /* 570 */
+ TPACPI_Q_IBM('I', 'U', TPACPI_BEEP_Q1), /* 570E - unverified */
+};
+
static int __init beep_init(struct ibm_init_struct *iibm)
{
+ unsigned long quirks;
+
vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n");
TPACPI_ACPIHANDLE_INIT(beep);
@@ -5110,6 +5254,11 @@
vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n",
str_supported(beep_handle != NULL));
+ quirks = tpacpi_check_quirks(beep_quirk_table,
+ ARRAY_SIZE(beep_quirk_table));
+
+ tp_features.beep_needs_two_args = !!(quirks & TPACPI_BEEP_Q1);
+
return (beep_handle)? 0 : 1;
}
@@ -5141,8 +5290,15 @@
/* beep_cmd set */
} else
return -EINVAL;
- if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
- return -EIO;
+ if (tp_features.beep_needs_two_args) {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vdd",
+ beep_cmd, 0))
+ return -EIO;
+ } else {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vd",
+ beep_cmd))
+ return -EIO;
+ }
}
return 0;
@@ -5569,6 +5725,10 @@
* Bit 3-0: backlight brightness level
*
* brightness_get_raw returns status data in the HBRV layout
+ *
+ * WARNING: The X61 has been verified to use HBRV for something else, so
+ * this should be used _only_ on IBM ThinkPads, and maybe with some careful
+ * testing on the very early *60 Lenovo models...
*/
enum {
@@ -5869,6 +6029,12 @@
brightness_mode);
}
+ /* Safety */
+ if (thinkpad_id.vendor != PCI_VENDOR_ID_IBM &&
+ (brightness_mode == TPACPI_BRGHT_MODE_ECNVRAM ||
+ brightness_mode == TPACPI_BRGHT_MODE_EC))
+ return -EINVAL;
+
if (tpacpi_brightness_get_raw(&b) < 0)
return 1;
@@ -6161,6 +6327,21 @@
* For firmware bugs, refer to:
* http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
*
+ * ----
+ *
+ * ThinkPad EC register 0x31 bit 0 (only on select models)
+ *
+ * When bit 0 of EC register 0x31 is zero, the tachometer registers
+ * show the speed of the main fan. When bit 0 of EC register 0x31
+ * is one, the tachometer registers show the speed of the auxiliary
+ * fan.
+ *
+ * Fan control seems to affect both fans, regardless of the state
+ * of this bit.
+ *
+ * So far, only the firmware for the X60/X61 non-tablet versions
+ * seem to support this (firmware TP-7M).
+ *
* TPACPI_FAN_WR_ACPI_FANS:
* ThinkPad X31, X40, X41. Not available in the X60.
*
@@ -6187,6 +6368,8 @@
fan_status_offset = 0x2f, /* EC register 0x2f */
fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
* 0x84 must be read before 0x85 */
+ fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M)
+ bit 0 selects which fan is active */
TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */
TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */
@@ -6249,30 +6432,18 @@
* We assume 0x07 really means auto mode while this quirk is active,
* as this is far more likely than the ThinkPad being in level 7,
* which is only used by the firmware during thermal emergencies.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e), TP-76 (R52),
+ * TP-70 (T43, R52), which are known to be buggy.
*/
-static void fan_quirk1_detect(void)
+static void fan_quirk1_setup(void)
{
- /* In some ThinkPads, neither the EC nor the ACPI
- * DSDT initialize the HFSP register, and it ends up
- * being initially set to 0x07 when it *could* be
- * either 0x07 or 0x80.
- *
- * Enable for TP-1Y (T43), TP-78 (R51e),
- * TP-76 (R52), TP-70 (T43, R52), which are known
- * to be buggy. */
if (fan_control_initial_status == 0x07) {
- switch (thinkpad_id.ec_model) {
- case 0x5931: /* TP-1Y */
- case 0x3837: /* TP-78 */
- case 0x3637: /* TP-76 */
- case 0x3037: /* TP-70 */
- printk(TPACPI_NOTICE
- "fan_init: initial fan status is unknown, "
- "assuming it is in auto mode\n");
- tp_features.fan_ctrl_status_undef = 1;
- ;;
- }
+ printk(TPACPI_NOTICE
+ "fan_init: initial fan status is unknown, "
+ "assuming it is in auto mode\n");
+ tp_features.fan_ctrl_status_undef = 1;
}
}
@@ -6292,6 +6463,38 @@
}
}
+/* Select main fan on X60/X61, NOOP on others */
+static bool fan_select_fan1(void)
+{
+ if (tp_features.second_fan) {
+ u8 val;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val &= 0xFEU;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+ }
+ return true;
+}
+
+/* Select secondary fan on X60/X61 */
+static bool fan_select_fan2(void)
+{
+ u8 val;
+
+ if (!tp_features.second_fan)
+ return false;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val |= 0x01U;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+
+ return true;
+}
+
/*
* Call with fan_mutex held
*/
@@ -6369,6 +6572,8 @@
switch (fan_status_access_mode) {
case TPACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan1()))
+ return -EIO;
if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
!acpi_ec_read(fan_rpm_offset + 1, &hi)))
return -EIO;
@@ -6385,6 +6590,34 @@
return 0;
}
+static int fan2_get_speed(unsigned int *speed)
+{
+ u8 hi, lo;
+ bool rc;
+
+ switch (fan_status_access_mode) {
+ case TPACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan2()))
+ return -EIO;
+ rc = !acpi_ec_read(fan_rpm_offset, &lo) ||
+ !acpi_ec_read(fan_rpm_offset + 1, &hi);
+ fan_select_fan1(); /* play it safe */
+ if (rc)
+ return -EIO;
+
+ if (likely(speed))
+ *speed = (hi << 8) | lo;
+
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
static int fan_set_level(int level)
{
if (!fan_control_allowed)
@@ -6790,6 +7023,25 @@
__ATTR(fan1_input, S_IRUGO,
fan_fan1_input_show, NULL);
+/* sysfs fan fan2_input ------------------------------------------------ */
+static ssize_t fan_fan2_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res;
+ unsigned int speed;
+
+ res = fan2_get_speed(&speed);
+ if (res < 0)
+ return res;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan2_input =
+ __ATTR(fan2_input, S_IRUGO,
+ fan_fan2_input_show, NULL);
+
/* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
char *buf)
@@ -6823,6 +7075,7 @@
static struct attribute *fan_attributes[] = {
&dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
&dev_attr_fan_fan1_input.attr,
+ NULL, /* for fan2_input */
NULL
};
@@ -6830,9 +7083,36 @@
.attrs = fan_attributes,
};
+#define TPACPI_FAN_Q1 0x0001 /* Unitialized HFSP */
+#define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */
+
+#define TPACPI_FAN_QI(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+#define TPACPI_FAN_QL(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
+ TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1),
+ TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN),
+};
+
+#undef TPACPI_FAN_QL
+#undef TPACPI_FAN_QI
+
static int __init fan_init(struct ibm_init_struct *iibm)
{
int rc;
+ unsigned long quirks;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
"initializing fan subdriver\n");
@@ -6843,12 +7123,16 @@
fan_control_commands = 0;
fan_watchdog_maxinterval = 0;
tp_features.fan_ctrl_status_undef = 0;
+ tp_features.second_fan = 0;
fan_control_desired_level = 7;
TPACPI_ACPIHANDLE_INIT(fans);
TPACPI_ACPIHANDLE_INIT(gfan);
TPACPI_ACPIHANDLE_INIT(sfan);
+ quirks = tpacpi_check_quirks(fan_quirk_table,
+ ARRAY_SIZE(fan_quirk_table));
+
if (gfan_handle) {
/* 570, 600e/x, 770e, 770x */
fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
@@ -6858,7 +7142,13 @@
if (likely(acpi_ec_read(fan_status_offset,
&fan_control_initial_status))) {
fan_status_access_mode = TPACPI_FAN_RD_TPEC;
- fan_quirk1_detect();
+ if (quirks & TPACPI_FAN_Q1)
+ fan_quirk1_setup();
+ if (quirks & TPACPI_FAN_2FAN) {
+ tp_features.second_fan = 1;
+ dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
+ "secondary fan support enabled\n");
+ }
} else {
printk(TPACPI_ERR
"ThinkPad ACPI EC access misbehaving, "
@@ -6914,6 +7204,11 @@
if (fan_status_access_mode != TPACPI_FAN_NONE ||
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+ if (tp_features.second_fan) {
+ /* attach second fan tachometer */
+ fan_attributes[ARRAY_SIZE(fan_attributes)-2] =
+ &dev_attr_fan_fan2_input.attr;
+ }
rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
if (rc < 0)
@@ -7385,6 +7680,24 @@
/* Probing */
+static bool __pure __init tpacpi_is_fw_digit(const char c)
+{
+ return (c >= '0' && c <= '9') || (c >= 'A' && c <= 'Z');
+}
+
+/* Most models: xxyTkkWW (#.##c); Ancient 570/600 and -SL lacks (#.##c) */
+static bool __pure __init tpacpi_is_valid_fw_id(const char* const s,
+ const char t)
+{
+ return s && strlen(s) >= 8 &&
+ tpacpi_is_fw_digit(s[0]) &&
+ tpacpi_is_fw_digit(s[1]) &&
+ s[2] == t && s[3] == 'T' &&
+ tpacpi_is_fw_digit(s[4]) &&
+ tpacpi_is_fw_digit(s[5]) &&
+ s[6] == 'W' && s[7] == 'W';
+}
+
/* returns 0 - probe ok, or < 0 - probe error.
* Probe ok doesn't mean thinkpad found.
* On error, kfree() cleanup on tp->* is not performed, caller must do it */
@@ -7411,10 +7724,15 @@
tp->bios_version_str = kstrdup(s, GFP_KERNEL);
if (s && !tp->bios_version_str)
return -ENOMEM;
- if (!tp->bios_version_str)
+
+ /* Really ancient ThinkPad 240X will fail this, which is fine */
+ if (!tpacpi_is_valid_fw_id(tp->bios_version_str, 'E'))
return 0;
+
tp->bios_model = tp->bios_version_str[0]
| (tp->bios_version_str[1] << 8);
+ tp->bios_release = (tp->bios_version_str[4] << 8)
+ | tp->bios_version_str[5];
/*
* ThinkPad T23 or newer, A31 or newer, R50e or newer,
@@ -7433,8 +7751,21 @@
tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
if (!tp->ec_version_str)
return -ENOMEM;
- tp->ec_model = ec_fw_string[0]
- | (ec_fw_string[1] << 8);
+
+ if (tpacpi_is_valid_fw_id(ec_fw_string, 'H')) {
+ tp->ec_model = ec_fw_string[0]
+ | (ec_fw_string[1] << 8);
+ tp->ec_release = (ec_fw_string[4] << 8)
+ | ec_fw_string[5];
+ } else {
+ printk(TPACPI_NOTICE
+ "ThinkPad firmware release %s "
+ "doesn't match the known patterns\n",
+ ec_fw_string);
+ printk(TPACPI_NOTICE
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ }
break;
}
}
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 7f207f3..ef3a2cd3a 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -287,6 +287,25 @@
ACPI_DECODE_16);
}
+static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
+ struct acpi_resource *res)
+{
+ struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
+
+ if (p->producer_consumer == ACPI_PRODUCER)
+ return;
+
+ if (p->resource_type == ACPI_MEMORY_RANGE)
+ pnpacpi_parse_allocated_memresource(dev,
+ p->minimum, p->address_length,
+ p->info.mem.write_protect);
+ else if (p->resource_type == ACPI_IO_RANGE)
+ pnpacpi_parse_allocated_ioresource(dev,
+ p->minimum, p->address_length,
+ p->granularity == 0xfff ? ACPI_DECODE_10 :
+ ACPI_DECODE_16);
+}
+
static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
void *data)
{
@@ -400,8 +419,7 @@
break;
case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
- if (res->data.ext_address64.producer_consumer == ACPI_PRODUCER)
- return AE_OK;
+ pnpacpi_parse_allocated_ext_address_space(dev, res);
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
@@ -630,6 +648,28 @@
IORESOURCE_IO_FIXED);
}
+static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
+ unsigned int option_flags,
+ struct acpi_resource *r)
+{
+ struct acpi_resource_extended_address64 *p = &r->data.ext_address64;
+ unsigned char flags = 0;
+
+ if (p->address_length == 0)
+ return;
+
+ if (p->resource_type == ACPI_MEMORY_RANGE) {
+ if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
+ flags = IORESOURCE_MEM_WRITEABLE;
+ pnp_register_mem_resource(dev, option_flags, p->minimum,
+ p->minimum, 0, p->address_length,
+ flags);
+ } else if (p->resource_type == ACPI_IO_RANGE)
+ pnp_register_port_resource(dev, option_flags, p->minimum,
+ p->minimum, 0, p->address_length,
+ IORESOURCE_IO_FIXED);
+}
+
struct acpipnp_parse_option_s {
struct pnp_dev *dev;
unsigned int option_flags;
@@ -711,6 +751,7 @@
break;
case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
+ pnpacpi_parse_ext_address_option(dev, option_flags, res);
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
@@ -765,6 +806,7 @@
case ACPI_RESOURCE_TYPE_ADDRESS16:
case ACPI_RESOURCE_TYPE_ADDRESS32:
case ACPI_RESOURCE_TYPE_ADDRESS64:
+ case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
return 1;
}
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index c34b110..c65e4ce 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -114,10 +114,13 @@
acpi_op_notify notify;
};
+#define ACPI_DRIVER_ALL_NOTIFY_EVENTS 0x1 /* system AND device events */
+
struct acpi_driver {
char name[80];
char class[80];
const struct acpi_device_id *ids; /* Supported Hardware IDs */
+ unsigned int flags;
struct acpi_device_ops ops;
struct device_driver drv;
struct module *owner;
@@ -168,7 +171,7 @@
/* Plug and Play */
-typedef char acpi_bus_id[5];
+typedef char acpi_bus_id[8];
typedef unsigned long acpi_bus_address;
typedef char acpi_hardware_id[15];
typedef char acpi_unique_id[9];
@@ -365,10 +368,10 @@
int register_acpi_bus_type(struct acpi_bus_type *);
int unregister_acpi_bus_type(struct acpi_bus_type *);
struct device *acpi_get_physical_device(acpi_handle);
-struct device *acpi_get_physical_pci_device(acpi_handle);
/* helper */
acpi_handle acpi_get_child(acpi_handle, acpi_integer);
+int acpi_is_root_bridge(acpi_handle);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index 0352c8f..f4906f6 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -57,8 +57,7 @@
*/
#define ACPI_POWER_HID "LNXPOWER"
-#define ACPI_PROCESSOR_OBJECT_HID "ACPI_CPU"
-#define ACPI_PROCESSOR_HID "ACPI0007"
+#define ACPI_PROCESSOR_OBJECT_HID "LNXCPU"
#define ACPI_SYSTEM_HID "LNXSYSTM"
#define ACPI_THERMAL_HID "LNXTHERM"
#define ACPI_BUTTON_HID_POWERF "LNXPWRBN"
@@ -91,17 +90,15 @@
/* ACPI PCI Interrupt Routing (pci_irq.c) */
-int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus);
-void acpi_pci_irq_del_prt(int segment, int bus);
+int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus);
+void acpi_pci_irq_del_prt(struct pci_bus *bus);
/* ACPI PCI Device Binding (pci_bind.c) */
struct pci_bus;
-acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id);
-int acpi_pci_bind(struct acpi_device *device);
-int acpi_pci_bind_root(struct acpi_device *device, struct acpi_pci_id *id,
- struct pci_bus *bus);
+struct pci_dev *acpi_get_pci_dev(acpi_handle);
+int acpi_pci_bind_root(struct acpi_device *device);
/* Arch-defined function to add a bus to the system */
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 4927c06..baf1e0a 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -258,6 +258,7 @@
extern struct acpi_processor_errata errata;
void arch_acpi_processor_init_pdc(struct acpi_processor *pr);
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr);
#ifdef ARCH_HAS_POWER_INIT
void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
diff --git a/include/acpi/video.h b/include/acpi/video.h
index af6fe95..cf7be3d 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -3,10 +3,10 @@
#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
extern int acpi_video_register(void);
-extern int acpi_video_exit(void);
+extern void acpi_video_unregister(void);
#else
static inline int acpi_video_register(void) { return 0; }
-static inline void acpi_video_exit(void) { return; }
+static inline void acpi_video_unregister(void) { return; }
#endif
#endif
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 51b4b0a..34321cf 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -113,9 +113,6 @@
extern u32 acpi_irq_handled;
extern u32 acpi_irq_not_handled;
-extern struct acpi_mcfg_allocation *pci_mmcfg_config;
-extern int pci_mmcfg_config_num;
-
extern int sbf_port;
extern unsigned long acpi_realmode_flags;
@@ -293,7 +290,10 @@
OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)
extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 flags);
+extern void acpi_early_init(void);
+
#else /* CONFIG_ACPI */
+static inline void acpi_early_init(void) { }
static inline int early_acpi_boot_init(void)
{
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index b3646cd..4391741 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -229,7 +229,6 @@
extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
struct hotplug_params *hpp);
int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
-int acpi_root_bridge(acpi_handle handle);
int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
int acpi_pci_detect_ejectable(struct pci_bus *pbus);
#endif
diff --git a/init/main.c b/init/main.c
index 4870dfe..2c5ade7 100644
--- a/init/main.c
+++ b/init/main.c
@@ -24,6 +24,7 @@
#include <linux/smp_lock.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
+#include <linux/acpi.h>
#include <linux/tty.h>
#include <linux/gfp.h>
#include <linux/percpu.h>
@@ -88,11 +89,6 @@
extern void prio_tree_init(void);
extern void radix_tree_init(void);
extern void free_initmem(void);
-#ifdef CONFIG_ACPI
-extern void acpi_early_init(void);
-#else
-static inline void acpi_early_init(void) { }
-#endif
#ifndef CONFIG_DEBUG_RODATA
static inline void mark_rodata_ro(void) { }
#endif
