V4L/DVB: ngene: add initial support for digital side of Avermedia m780
Add ATSC/QAM support for the Avermedia m780. Note that this patch does
not include any analog support for the board, as the ngene bridge driver does
not yet have analog implemented
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index 34eaedf..ae1f612 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -46,6 +46,8 @@
#include "stv6110x.h"
#include "stv090x.h"
#include "lnbh24.h"
+#include "lgdt330x.h"
+#include "mt2131.h"
static int one_adapter = 1;
module_param(one_adapter, int, 0444);
@@ -513,11 +515,12 @@
/****************************************************************************/
-static u8 TSFeatureDecoderSetup[8 * 4] = {
+static u8 TSFeatureDecoderSetup[8 * 5] = {
0x42, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,
0x40, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* DRXH */
0x71, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* DRXHser */
0x72, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* S2ser */
+ 0x40, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* LGDT3303 */
};
/* Set NGENE I2S Config to 16 bit packed */
@@ -1696,6 +1699,34 @@
return 0;
}
+static struct lgdt330x_config aver_m780 = {
+ .demod_address = 0xb2 >> 1,
+ .demod_chip = LGDT3303,
+ .serial_mpeg = 0x00, /* PARALLEL */
+ .clock_polarity_flip = 1,
+};
+
+static struct mt2131_config m780_tunerconfig = {
+ 0xc0 >> 1
+};
+
+/* A single func to attach the demo and tuner, rather than
+ * use two sep funcs like the current design mandates.
+ */
+static int demod_attach_lg330x(struct ngene_channel *chan)
+{
+ chan->fe = dvb_attach(lgdt330x_attach, &aver_m780, &chan->i2c_adapter);
+ if (chan->fe == NULL) {
+ printk(KERN_ERR DEVICE_NAME ": No LGDT330x found!\n");
+ return -ENODEV;
+ }
+
+ dvb_attach(mt2131_attach, chan->fe, &chan->i2c_adapter,
+ &m780_tunerconfig, 0);
+
+ return (chan->fe) ? 0 : -ENODEV;
+}
+
/****************************************************************************/
/****************************************************************************/
/****************************************************************************/
@@ -1961,6 +1992,24 @@
.fw_version = 15,
};
+static struct ngene_info ngene_info_m780 = {
+ .type = NGENE_APP,
+ .name = "Aver M780 ATSC/QAM-B",
+
+ /* Channel 0 is analog, which is currently unsupported */
+ .io_type = { NGENE_IO_NONE, NGENE_IO_TSIN },
+ .demod_attach = { NULL, demod_attach_lg330x },
+
+ /* Ensure these are NULL else the frame will call them (as funcs) */
+ .tuner_attach = { 0, 0, 0, 0 },
+ .fe_config = { NULL, &aver_m780 },
+ .avf = { 0 },
+
+ /* A custom electrical interface config for the demod to bridge */
+ .tsf = { 4, 4 },
+ .fw_version = 15,
+};
+
/****************************************************************************/
@@ -1982,6 +2031,7 @@
NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2),
NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2),
NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5),
+ NGENE_ID(0x1461, 0x062e, ngene_info_m780),
{0}
};
MODULE_DEVICE_TABLE(pci, ngene_id_tbl);
