bnx2x: Add Nic partitioning mode (57712 devices)
NIC partitioning is another flavor of multi function - having few
PCI functions share the same physical port. Unlike the currently
supported mode of multi-function which depends on the switch
configuration and uses outer-VLAN, the NPAR mode is switch independent
and uses the MAC addresses to distribute incoming packets to the different
functions. This patch adds the specific HW setting of the NPAR mode
and some distinctions between switch dependent (SD) and
switch independent (SI) multi-function (MF) modes where the configuration
is not the same.
Advance driver version to 1.60.00-6
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index 4cfd4e9..6555c47 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -434,7 +434,12 @@
#define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_DISABLED 0x00000000
#define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED 0x00000002
-#define SHARED_FEATURE_MF_MODE_DISABLED 0x00000100
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_MASK 0x00000700
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_SHIFT 8
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED 0x00000000
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF 0x00000100
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4 0x00000200
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT 0x00000300
};
@@ -815,6 +820,9 @@
#define DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL 0xa1000000
#define REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL 0x00050234
+#define DRV_MSG_CODE_SET_MF_BW 0xe0000000
+#define REQ_BC_VER_4_SET_MF_BW 0x00060202
+#define DRV_MSG_CODE_SET_MF_BW_ACK 0xe1000000
#define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000
#define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000
#define BIOS_MSG_CODE_VIRT_MAC_PRIM 0xff030000
@@ -888,6 +896,7 @@
u32 drv_status;
#define DRV_STATUS_PMF 0x00000001
+#define DRV_STATUS_SET_MF_BW 0x00000004
#define DRV_STATUS_DCC_EVENT_MASK 0x0000ff00
#define DRV_STATUS_DCC_DISABLE_ENABLE_PF 0x00000100
@@ -988,12 +997,43 @@
};
+/* This structure is not applicable and should not be accessed on 57711 */
+struct func_ext_cfg {
+ u32 func_cfg;
+#define MACP_FUNC_CFG_FLAGS_MASK 0x000000FF
+#define MACP_FUNC_CFG_FLAGS_SHIFT 0
+#define MACP_FUNC_CFG_FLAGS_ENABLED 0x00000001
+#define MACP_FUNC_CFG_FLAGS_ETHERNET 0x00000002
+#define MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD 0x00000004
+#define MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD 0x00000008
+
+ u32 iscsi_mac_addr_upper;
+ u32 iscsi_mac_addr_lower;
+
+ u32 fcoe_mac_addr_upper;
+ u32 fcoe_mac_addr_lower;
+
+ u32 fcoe_wwn_port_name_upper;
+ u32 fcoe_wwn_port_name_lower;
+
+ u32 fcoe_wwn_node_name_upper;
+ u32 fcoe_wwn_node_name_lower;
+
+ u32 preserve_data;
+#define MF_FUNC_CFG_PRESERVE_L2_MAC (1<<0)
+#define MF_FUNC_CFG_PRESERVE_ISCSI_MAC (1<<1)
+#define MF_FUNC_CFG_PRESERVE_FCOE_MAC (1<<2)
+#define MF_FUNC_CFG_PRESERVE_FCOE_WWN_P (1<<3)
+#define MF_FUNC_CFG_PRESERVE_FCOE_WWN_N (1<<4)
+};
+
struct mf_cfg {
struct shared_mf_cfg shared_mf_config;
struct port_mf_cfg port_mf_config[PORT_MAX];
struct func_mf_cfg func_mf_config[E1H_FUNC_MAX];
+ struct func_ext_cfg func_ext_config[E1H_FUNC_MAX];
};
