ARM: SMP: consolidate the common parts of smp_prepare_cpus()
There is a certain amount of smp_prepare_cpus() which doesn't belong
in the platform support code - that is, code which is invariant to the
SMP implementation. Move this code into arch/arm/kernel/smp.c, and
add a platform_ prefix to the original function.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index f93d0a6..96ed521 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -45,10 +45,6 @@
*/
extern void smp_init_cpus(void);
-/*
- * Move global data into per-processor storage.
- */
-extern void smp_store_cpu_info(unsigned int cpuid);
/*
* Raise an IPI cross call on CPUs in callmap.
@@ -73,6 +69,11 @@
extern void platform_secondary_init(unsigned int cpu);
/*
+ * Initialize cpu_possible map, and enable coherency
+ */
+extern void platform_smp_prepare_cpus(unsigned int);
+
+/*
* Initial data for bringing up a secondary CPU.
*/
struct secondary_data {
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 64f2d19..c66f2d3 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -282,6 +282,17 @@
#endif /* CONFIG_HOTPLUG_CPU */
/*
+ * Called by both boot and secondaries to move global data into
+ * per-processor storage.
+ */
+static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
+{
+ struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
+
+ cpu_info->loops_per_jiffy = loops_per_jiffy;
+}
+
+/*
* This is the secondary CPU boot entry. We're using this CPUs
* idle thread stack, but a set of temporary page tables.
*/
@@ -339,17 +350,6 @@
cpu_idle();
}
-/*
- * Called by both boot and secondaries to move global data into
- * per-processor storage.
- */
-void __cpuinit smp_store_cpu_info(unsigned int cpuid)
-{
- struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
-
- cpu_info->loops_per_jiffy = loops_per_jiffy;
-}
-
void __init smp_cpus_done(unsigned int max_cpus)
{
int cpu;
@@ -372,6 +372,33 @@
per_cpu(cpu_data, cpu).idle = current;
}
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int ncores = num_possible_cpus();
+
+ smp_store_cpu_info(smp_processor_id());
+
+ /*
+ * are we trying to boot more cores than exist?
+ */
+ if (max_cpus > ncores)
+ max_cpus = ncores;
+
+ if (max_cpus > 1) {
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+
+ /*
+ * Initialise the SCU if there are more than one CPU
+ * and let them know where to start.
+ */
+ platform_smp_prepare_cpus(max_cpus);
+ }
+}
+
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
smp_cross_call(mask, IPI_CALL_FUNC);
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 405a8fc..3c3d679 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -21,7 +21,6 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/omap4-common.h>
@@ -123,20 +122,10 @@
set_cpu_possible(i, true);
}
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- unsigned int ncores = num_possible_cpus();
- unsigned int cpu = smp_processor_id();
int i;
- smp_store_cpu_info(cpu);
-
- /*
- * are we trying to boot more cores than exist?
- */
- if (max_cpus > ncores)
- max_cpus = ncores;
-
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
@@ -144,18 +133,10 @@
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
- if (max_cpus > 1) {
- /*
- * Enable the local timer or broadcast device for the
- * boot CPU, but only if we have more than one CPU.
- */
- percpu_timer_setup();
-
- /*
- * Initialise the SCU and wake up the secondary core using
- * wakeup_secondary().
- */
- scu_enable(scu_base);
- wakeup_secondary();
- }
+ /*
+ * Initialise the SCU and wake up the secondary core using
+ * wakeup_secondary().
+ */
+ scu_enable(scu_base);
+ wakeup_secondary();
}
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ef3cc86..380562c 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,7 +19,6 @@
#include <asm/cacheflush.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/localtimer.h>
#include <asm/unified.h>
#include <mach/board-eb.h>
@@ -147,20 +146,10 @@
set_cpu_possible(i, true);
}
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- unsigned int ncores = num_possible_cpus();
- unsigned int cpu = smp_processor_id();
int i;
- smp_store_cpu_info(cpu);
-
- /*
- * are we trying to boot more cores than exist?
- */
- if (max_cpus > ncores)
- max_cpus = ncores;
-
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
@@ -168,22 +157,14 @@
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
- if (max_cpus > 1) {
- /*
- * Enable the local timer or broadcast device for the
- * boot CPU, but only if we have more than one CPU.
- */
- percpu_timer_setup();
+ scu_enable(scu_base_addr());
- scu_enable(scu_base_addr());
-
- /*
- * Write the address of secondary startup into the
- * system-wide flags register. The BootMonitor waits
- * until it receives a soft interrupt, and then the
- * secondary CPU branches to this address.
- */
- __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
- __io_address(REALVIEW_SYS_FLAGSSET));
- }
+ /*
+ * Write the address of secondary startup into the
+ * system-wide flags register. The BootMonitor waits
+ * until it receives a soft interrupt, and then the
+ * secondary CPU branches to this address.
+ */
+ __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
+ __io_address(REALVIEW_SYS_FLAGSSET));
}
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
index 560ada8..51c44d4 100644
--- a/arch/arm/mach-s5pv310/platsmp.c
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -22,7 +22,6 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
@@ -142,18 +141,10 @@
set_cpu_possible(i, true);
}
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- unsigned int ncores = num_possible_cpus();
- unsigned int cpu = smp_processor_id();
int i;
- smp_store_cpu_info(cpu);
-
- /* are we trying to boot more cores than exist? */
- if (max_cpus > ncores)
- max_cpus = ncores;
-
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
@@ -161,25 +152,13 @@
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
+ scu_enable(scu_base_addr());
+
/*
- * Initialise the SCU if there are more than one CPU and let
- * them know where to start.
+ * Write the address of secondary startup into the
+ * system-wide flags register. The boot monitor waits
+ * until it receives a soft interrupt, and then the
+ * secondary CPU branches to this address.
*/
- if (max_cpus > 1) {
- /*
- * Enable the local timer or broadcast device for the
- * boot CPU, but only if we have more than one CPU.
- */
- percpu_timer_setup();
-
- scu_enable(scu_base_addr());
-
- /*
- * Write the address of secondary startup into the
- * system-wide flags register. The boot monitor waits
- * until it receives a soft interrupt, and then the
- * secondary CPU branches to this address.
- */
__raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM);
- }
}
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 66d0634..b66a0c2 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -22,7 +22,6 @@
#include <asm/cacheflush.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <mach/iomap.h>
@@ -127,20 +126,10 @@
cpu_set(i, cpu_possible_map);
}
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- unsigned int ncores = scu_get_core_count(scu_base);
- unsigned int cpu = smp_processor_id();
int i;
- smp_store_cpu_info(cpu);
-
- /*
- * are we trying to boot more cores than exist?
- */
- if (max_cpus > ncores)
- max_cpus = ncores;
-
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
@@ -148,8 +137,5 @@
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
- if (max_cpus > 1) {
- percpu_timer_setup();
- scu_enable(scu_base);
- }
+ scu_enable(scu_base);
}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index fd40fa1..458a288 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -18,7 +18,6 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
@@ -138,20 +137,10 @@
set_cpu_possible(i, true);
}
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- unsigned int ncores = num_possible_cpus();
- unsigned int cpu = smp_processor_id();
int i;
- smp_store_cpu_info(cpu);
-
- /*
- * are we trying to boot more cores than exist?
- */
- if (max_cpus > ncores)
- max_cpus = ncores;
-
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
@@ -159,13 +148,6 @@
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
- if (max_cpus > 1) {
- /*
- * Enable the local timer or broadcast device for the
- * boot CPU, but only if we have more than one CPU.
- */
- percpu_timer_setup();
- scu_enable(__io_address(UX500_SCU_BASE));
- wakeup_secondary();
- }
+ scu_enable(__io_address(UX500_SCU_BASE));
+ wakeup_secondary();
}
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index b5a7586..a0341d1 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -17,7 +17,6 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
@@ -136,20 +135,10 @@
set_cpu_possible(i, true);
}
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- unsigned int ncores = num_possible_cpus();
- unsigned int cpu = smp_processor_id();
int i;
- smp_store_cpu_info(cpu);
-
- /*
- * are we trying to boot more cores than exist?
- */
- if (max_cpus > ncores)
- max_cpus = ncores;
-
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
@@ -157,27 +146,15 @@
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
+ scu_enable(scu_base_addr());
+
/*
- * Initialise the SCU if there are more than one CPU and let
- * them know where to start.
+ * Write the address of secondary startup into the
+ * system-wide flags register. The boot monitor waits
+ * until it receives a soft interrupt, and then the
+ * secondary CPU branches to this address.
*/
- if (max_cpus > 1) {
- /*
- * Enable the local timer or broadcast device for the
- * boot CPU, but only if we have more than one CPU.
- */
- percpu_timer_setup();
-
- scu_enable(scu_base_addr());
-
- /*
- * Write the address of secondary startup into the
- * system-wide flags register. The boot monitor waits
- * until it receives a soft interrupt, and then the
- * secondary CPU branches to this address.
- */
- writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
- writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
- MMIO_P2V(V2M_SYS_FLAGSSET));
- }
+ writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
+ writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
+ MMIO_P2V(V2M_SYS_FLAGSSET));
}
