 /*
    tda9840 - i2c-driver for the tda9840 by SGS Thomson

    Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
    Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>

    The tda9840 is a stereo/dual sound processor with digital
    identification. It can be found at address 0x84 on the i2c-bus.

    For detailed informations download the specifications directly
    from SGS Thomson at http://www.st.com

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */


#include <linux/module.h>
#include <linux/ioctl.h>
#include <linux/i2c.h>
#include <media/v4l2-device.h>
#include <media/v4l2-i2c-drv-legacy.h>
#include "tda9840.h"

MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
MODULE_DESCRIPTION("tda9840 driver");
MODULE_LICENSE("GPL");

static int debug;
module_param(debug, int, 0644);

MODULE_PARM_DESC(debug, "Debug level (0-1)");

#define	SWITCH		0x00
#define	LEVEL_ADJUST	0x02
#define	STEREO_ADJUST	0x03
#define	TEST		0x04

#define TDA9840_SET_MUTE                0x00
#define TDA9840_SET_MONO                0x10
#define TDA9840_SET_STEREO              0x2a
#define TDA9840_SET_LANG1               0x12
#define TDA9840_SET_LANG2               0x1e
#define TDA9840_SET_BOTH                0x1a
#define TDA9840_SET_BOTH_R              0x16
#define TDA9840_SET_EXTERNAL            0x7a

/* addresses to scan, found only at 0x42 (7-Bit) */
static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END };

/* magic definition of all other variables and things */
I2C_CLIENT_INSMOD;

static void tda9840_write(struct v4l2_subdev *sd, u8 reg, u8 val)
{
	struct i2c_client *client = v4l2_get_subdevdata(sd);

	if (i2c_smbus_write_byte_data(client, reg, val))
		v4l2_dbg(1, debug, sd, "error writing %02x to %02x\n",
				val, reg);
}

static int tda9840_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *t)
{
	int byte;

	if (t->index)
		return -EINVAL;

	switch (t->audmode) {
	case V4L2_TUNER_MODE_STEREO:
		byte = TDA9840_SET_STEREO;
		break;
	case V4L2_TUNER_MODE_LANG1_LANG2:
		byte = TDA9840_SET_BOTH;
		break;
	case V4L2_TUNER_MODE_LANG1:
		byte = TDA9840_SET_LANG1;
		break;
	case V4L2_TUNER_MODE_LANG2:
		byte = TDA9840_SET_LANG2;
		break;
	default:
		byte = TDA9840_SET_MONO;
		break;
	}
	v4l2_dbg(1, debug, sd, "TDA9840_SWITCH: 0x%02x\n", byte);
	tda9840_write(sd, SWITCH, byte);
	return 0;
}

static int tda9840_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *t)
{
	struct i2c_client *client = v4l2_get_subdevdata(sd);
	u8 byte;

	t->rxsubchans = V4L2_TUNER_SUB_MONO;
	if (1 != i2c_master_recv(client, &byte, 1)) {
		v4l2_dbg(1, debug, sd,
			"i2c_master_recv() failed\n");
		return -EIO;
	}

	if (byte & 0x80) {
		v4l2_dbg(1, debug, sd,
			"TDA9840_DETECT: register contents invalid\n");
		return -EINVAL;
	}

	v4l2_dbg(1, debug, sd, "TDA9840_DETECT: byte: 0x%02x\n", byte);

	switch (byte & 0x60) {
	case 0x00:
		t->rxsubchans = V4L2_TUNER_SUB_MONO;
		break;
	case 0x20:
		t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
		break;
	case 0x40:
		t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
		break;
	default: /* Incorrect detect */
		t->rxsubchans = V4L2_TUNER_MODE_MONO;
		break;
	}
	return 0;
}

static int tda9840_ioctl(struct v4l2_subdev *sd, unsigned cmd, void *arg)
{
	int byte;

	switch (cmd) {
	case TDA9840_LEVEL_ADJUST:
		byte = *(int *)arg;
		v4l2_dbg(1, debug, sd, "TDA9840_LEVEL_ADJUST: %d\n", byte);

		/* check for correct range */
		if (byte > 25 || byte < -20)
			return -EINVAL;

		/* calculate actual value to set, see specs, page 18 */
		byte /= 5;
		if (0 < byte)
			byte += 0x8;
		else
			byte = -byte;
		tda9840_write(sd, LEVEL_ADJUST, byte);
		break;

	case TDA9840_STEREO_ADJUST:
		byte = *(int *)arg;
		v4l2_dbg(1, debug, sd, "TDA9840_STEREO_ADJUST: %d\n", byte);

		/* check for correct range */
		if (byte > 25 || byte < -24)
			return -EINVAL;

		/* calculate actual value to set */
		byte /= 5;
		if (0 < byte)
			byte += 0x20;
		else
			byte = -byte;

		tda9840_write(sd, STEREO_ADJUST, byte);
		break;
	default:
		return -ENOIOCTLCMD;
	}
	return 0;
}

static int tda9840_command(struct i2c_client *client, unsigned cmd, void *arg)
{
	return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
}

/* ----------------------------------------------------------------------- */

static const struct v4l2_subdev_core_ops tda9840_core_ops = {
	.ioctl = tda9840_ioctl,
};

static const struct v4l2_subdev_tuner_ops tda9840_tuner_ops = {
	.s_tuner = tda9840_s_tuner,
	.g_tuner = tda9840_g_tuner,
};

static const struct v4l2_subdev_ops tda9840_ops = {
	.core = &tda9840_core_ops,
	.tuner = &tda9840_tuner_ops,
};

/* ----------------------------------------------------------------------- */

static int tda9840_probe(struct i2c_client *client,
			  const struct i2c_device_id *id)
{
	struct v4l2_subdev *sd;
	int result;
	int byte;

	/* let's see whether this adapter can support what we need */
	if (!i2c_check_functionality(client->adapter,
			I2C_FUNC_SMBUS_READ_BYTE_DATA |
			I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
		return -EIO;

	v4l_info(client, "chip found @ 0x%x (%s)\n",
			client->addr << 1, client->adapter->name);

	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
	if (sd == NULL)
		return -ENOMEM;
	v4l2_i2c_subdev_init(sd, client, &tda9840_ops);

	/* set initial values for level & stereo - adjustment, mode */
	byte = 0;
	result = tda9840_ioctl(sd, TDA9840_LEVEL_ADJUST, &byte);
	result |= tda9840_ioctl(sd, TDA9840_STEREO_ADJUST, &byte);
	tda9840_write(sd, SWITCH, TDA9840_SET_STEREO);
	if (result) {
		v4l2_dbg(1, debug, sd, "could not initialize tda9840\n");
		kfree(sd);
		return -ENODEV;
	}
	return 0;
}

static int tda9840_remove(struct i2c_client *client)
{
	struct v4l2_subdev *sd = i2c_get_clientdata(client);

	v4l2_device_unregister_subdev(sd);
	kfree(sd);
	return 0;
}

static int tda9840_legacy_probe(struct i2c_adapter *adapter)
{
	/* Let's see whether this is a known adapter we can attach to.
	   Prevents conflicts with tvaudio.c. */
	return adapter->id == I2C_HW_SAA7146;
}
static const struct i2c_device_id tda9840_id[] = {
	{ "tda9840", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, tda9840_id);

static struct v4l2_i2c_driver_data v4l2_i2c_data = {
	.name = "tda9840",
	.driverid = I2C_DRIVERID_TDA9840,
	.command = tda9840_command,
	.probe = tda9840_probe,
	.remove = tda9840_remove,
	.legacy_probe = tda9840_legacy_probe,
	.id_table = tda9840_id,
};