/*
 * ADIS16260/ADIS16265 Programmable Digital Gyroscope Sensor Driver
 *
 * Copyright 2010 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/list.h>
#include <linux/module.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>

#include "adis16260.h"

#define DRIVER_NAME		"adis16260"

static int adis16260_check_status(struct iio_dev *indio_dev);

/**
 * adis16260_spi_write_reg_8() - write single byte to a register
 * @indio_dev: iio_dev for the device
 * @reg_address: the address of the register to be written
 * @val: the value to write
 **/
static int adis16260_spi_write_reg_8(struct iio_dev *indio_dev,
		u8 reg_address,
		u8 val)
{
	int ret;
	struct adis16260_state *st = iio_priv(indio_dev);

	mutex_lock(&st->buf_lock);
	st->tx[0] = ADIS16260_WRITE_REG(reg_address);
	st->tx[1] = val;

	ret = spi_write(st->us, st->tx, 2);
	mutex_unlock(&st->buf_lock);

	return ret;
}

/**
 * adis16260_spi_write_reg_16() - write 2 bytes to a pair of registers
 * @indio_dev: iio_dev for the device
 * @reg_address: the address of the lower of the two registers. Second register
 *               is assumed to have address one greater.
 * @val: value to be written
 **/
static int adis16260_spi_write_reg_16(struct iio_dev *indio_dev,
		u8 lower_reg_address,
		u16 value)
{
	int ret;
	struct spi_message msg;
	struct adis16260_state *st = iio_priv(indio_dev);
	struct spi_transfer xfers[] = {
		{
			.tx_buf = st->tx,
			.bits_per_word = 8,
			.len = 2,
			.cs_change = 1,
			.delay_usecs = 20,
		}, {
			.tx_buf = st->tx + 2,
			.bits_per_word = 8,
			.len = 2,
			.delay_usecs = 20,
		},
	};

	mutex_lock(&st->buf_lock);
	st->tx[0] = ADIS16260_WRITE_REG(lower_reg_address);
	st->tx[1] = value & 0xFF;
	st->tx[2] = ADIS16260_WRITE_REG(lower_reg_address + 1);
	st->tx[3] = (value >> 8) & 0xFF;

	spi_message_init(&msg);
	spi_message_add_tail(&xfers[0], &msg);
	spi_message_add_tail(&xfers[1], &msg);
	ret = spi_sync(st->us, &msg);
	mutex_unlock(&st->buf_lock);

	return ret;
}

/**
 * adis16260_spi_read_reg_16() - read 2 bytes from a 16-bit register
 * @indio_dev: iio_dev for the device
 * @reg_address: the address of the lower of the two registers. Second register
 *               is assumed to have address one greater.
 * @val: somewhere to pass back the value read
 **/
static int adis16260_spi_read_reg_16(struct iio_dev *indio_dev,
		u8 lower_reg_address,
		u16 *val)
{
	struct spi_message msg;
	struct adis16260_state *st = iio_priv(indio_dev);
	int ret;
	struct spi_transfer xfers[] = {
		{
			.tx_buf = st->tx,
			.bits_per_word = 8,
			.len = 2,
			.cs_change = 1,
			.delay_usecs = 30,
		}, {
			.rx_buf = st->rx,
			.bits_per_word = 8,
			.len = 2,
			.delay_usecs = 30,
		},
	};

	mutex_lock(&st->buf_lock);
	st->tx[0] = ADIS16260_READ_REG(lower_reg_address);
	st->tx[1] = 0;

	spi_message_init(&msg);
	spi_message_add_tail(&xfers[0], &msg);
	spi_message_add_tail(&xfers[1], &msg);
	ret = spi_sync(st->us, &msg);
	if (ret) {
		dev_err(&st->us->dev,
			"problem when reading 16 bit register 0x%02X",
			lower_reg_address);
		goto error_ret;
	}
	*val = (st->rx[0] << 8) | st->rx[1];

error_ret:
	mutex_unlock(&st->buf_lock);
	return ret;
}

static ssize_t adis16260_read_frequency_available(struct device *dev,
						  struct device_attribute *attr,
						  char *buf)
{
	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
	struct adis16260_state *st = iio_priv(indio_dev);
	if (spi_get_device_id(st->us)->driver_data)
		return sprintf(buf, "%s\n", "0.129 ~ 256");
	else
		return sprintf(buf, "%s\n", "256 2048");
}

static ssize_t adis16260_read_frequency(struct device *dev,
		struct device_attribute *attr,
		char *buf)
{
	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
	struct adis16260_state *st = iio_priv(indio_dev);
	int ret, len = 0;
	u16 t;
	int sps;
	ret = adis16260_spi_read_reg_16(indio_dev,
			ADIS16260_SMPL_PRD,
			&t);
	if (ret)
		return ret;

	if (spi_get_device_id(st->us)->driver_data) /* If an adis16251 */
		sps =  (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 8 : 256;
	else
		sps =  (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 66 : 2048;
	sps /= (t & ADIS16260_SMPL_PRD_DIV_MASK) + 1;
	len = sprintf(buf, "%d SPS\n", sps);
	return len;
}

static ssize_t adis16260_write_frequency(struct device *dev,
		struct device_attribute *attr,
		const char *buf,
		size_t len)
{
	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
	struct adis16260_state *st = iio_priv(indio_dev);
	long val;
	int ret;
	u8 t;

	ret = strict_strtol(buf, 10, &val);
	if (ret)
		return ret;

	mutex_lock(&indio_dev->mlock);
	if (spi_get_device_id(st->us)) {
		t = (256 / val);
		if (t > 0)
			t--;
		t &= ADIS16260_SMPL_PRD_DIV_MASK;
	} else {
		t = (2048 / val);
		if (t > 0)
			t--;
		t &= ADIS16260_SMPL_PRD_DIV_MASK;
	}
	if ((t & ADIS16260_SMPL_PRD_DIV_MASK) >= 0x0A)
		st->us->max_speed_hz = ADIS16260_SPI_SLOW;
	else
		st->us->max_speed_hz = ADIS16260_SPI_FAST;
	ret = adis16260_spi_write_reg_8(indio_dev,
			ADIS16260_SMPL_PRD,
			t);

	mutex_unlock(&indio_dev->mlock);

	return ret ? ret : len;
}

static int adis16260_reset(struct iio_dev *indio_dev)
{
	int ret;
	ret = adis16260_spi_write_reg_8(indio_dev,
			ADIS16260_GLOB_CMD,
			ADIS16260_GLOB_CMD_SW_RESET);
	if (ret)
		dev_err(&indio_dev->dev, "problem resetting device");

	return ret;
}

static ssize_t adis16260_write_reset(struct device *dev,
		struct device_attribute *attr,
		const char *buf, size_t len)
{
	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
	if (len < 1)
		return -EINVAL;
	switch (buf[0]) {
	case '1':
	case 'y':
	case 'Y':
		return adis16260_reset(indio_dev);
	}
	return -EINVAL;
}

int adis16260_set_irq(struct iio_dev *indio_dev, bool enable)
{
	int ret;
	u16 msc;
	ret = adis16260_spi_read_reg_16(indio_dev, ADIS16260_MSC_CTRL, &msc);
	if (ret)
		goto error_ret;

	msc |= ADIS16260_MSC_CTRL_DATA_RDY_POL_HIGH;
	if (enable)
		msc |= ADIS16260_MSC_CTRL_DATA_RDY_EN;
	else
		msc &= ~ADIS16260_MSC_CTRL_DATA_RDY_EN;

	ret = adis16260_spi_write_reg_16(indio_dev, ADIS16260_MSC_CTRL, msc);
	if (ret)
		goto error_ret;

error_ret:
	return ret;
}

/* Power down the device */
static int adis16260_stop_device(struct iio_dev *indio_dev)
{
	int ret;
	u16 val = ADIS16260_SLP_CNT_POWER_OFF;

	ret = adis16260_spi_write_reg_16(indio_dev, ADIS16260_SLP_CNT, val);
	if (ret)
		dev_err(&indio_dev->dev, "problem with turning device off: SLP_CNT");

	return ret;
}

static int adis16260_self_test(struct iio_dev *indio_dev)
{
	int ret;
	ret = adis16260_spi_write_reg_16(indio_dev,
			ADIS16260_MSC_CTRL,
			ADIS16260_MSC_CTRL_MEM_TEST);
	if (ret) {
		dev_err(&indio_dev->dev, "problem starting self test");
		goto err_ret;
	}

	adis16260_check_status(indio_dev);

err_ret:
	return ret;
}

static int adis16260_check_status(struct iio_dev *indio_dev)
{
	u16 status;
	int ret;
	struct device *dev = &indio_dev->dev;

	ret = adis16260_spi_read_reg_16(indio_dev,
					ADIS16260_DIAG_STAT,
					&status);

	if (ret < 0) {
		dev_err(dev, "Reading status failed\n");
		goto error_ret;
	}
	ret = status & 0x7F;
	if (status & ADIS16260_DIAG_STAT_FLASH_CHK)
		dev_err(dev, "Flash checksum error\n");
	if (status & ADIS16260_DIAG_STAT_SELF_TEST)
		dev_err(dev, "Self test error\n");
	if (status & ADIS16260_DIAG_STAT_OVERFLOW)
		dev_err(dev, "Sensor overrange\n");
	if (status & ADIS16260_DIAG_STAT_SPI_FAIL)
		dev_err(dev, "SPI failure\n");
	if (status & ADIS16260_DIAG_STAT_FLASH_UPT)
		dev_err(dev, "Flash update failed\n");
	if (status & ADIS16260_DIAG_STAT_POWER_HIGH)
		dev_err(dev, "Power supply above 5.25V\n");
	if (status & ADIS16260_DIAG_STAT_POWER_LOW)
		dev_err(dev, "Power supply below 4.75V\n");

error_ret:
	return ret;
}

static int adis16260_initial_setup(struct iio_dev *indio_dev)
{
	int ret;
	struct device *dev = &indio_dev->dev;

	/* Disable IRQ */
	ret = adis16260_set_irq(indio_dev, false);
	if (ret) {
		dev_err(dev, "disable irq failed");
		goto err_ret;
	}

	/* Do self test */
	ret = adis16260_self_test(indio_dev);
	if (ret) {
		dev_err(dev, "self test failure");
		goto err_ret;
	}

	/* Read status register to check the result */
	ret = adis16260_check_status(indio_dev);
	if (ret) {
		adis16260_reset(indio_dev);
		dev_err(dev, "device not playing ball -> reset");
		msleep(ADIS16260_STARTUP_DELAY);
		ret = adis16260_check_status(indio_dev);
		if (ret) {
			dev_err(dev, "giving up");
			goto err_ret;
		}
	}

err_ret:
	return ret;
}

static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
		adis16260_read_frequency,
		adis16260_write_frequency);

static IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, adis16260_write_reset, 0);

static IIO_DEVICE_ATTR(sampling_frequency_available,
		       S_IRUGO, adis16260_read_frequency_available, NULL, 0);

enum adis16260_channel {
	gyro,
	temp,
	in_supply,
	in_aux,
	angle,
};
#define ADIS16260_GYRO_CHANNEL_SET(axis, mod)				\
	struct iio_chan_spec adis16260_channels_##axis[] = {		\
		{							\
			.type = IIO_ANGL_VEL,				\
			.modified = 1,					\
			.channel2 = mod,				\
			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
			IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |		\
			IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |		\
			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
			.address = gyro,				\
			.scan_index = ADIS16260_SCAN_GYRO,		\
			.scan_type = {					\
				.sign = 's',				\
				.realbits = 14,				\
				.storagebits = 16,			\
			},						\
		}, {							\
			.type = IIO_ANGL,				\
			.modified = 1,					\
			.channel2 = mod,				\
			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
			.address = angle,				\
			.scan_index = ADIS16260_SCAN_ANGL,		\
			.scan_type = {					\
				.sign = 'u',				\
				.realbits = 14,				\
				.storagebits = 16,			\
			},						\
		}, {							\
			.type = IIO_TEMP,				\
			.indexed = 1,					\
			.channel = 0,					\
			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
			IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |		\
			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
			.address = temp,				\
			.scan_index = ADIS16260_SCAN_TEMP,		\
			.scan_type = {					\
				.sign = 'u',				\
				.realbits = 12,				\
				.storagebits = 16,			\
			},						\
		}, {							\
			.type = IIO_VOLTAGE,				\
			.indexed = 1,					\
			.channel = 0,					\
			.extend_name = "supply",			\
			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
			.address = in_supply,				\
			.scan_index = ADIS16260_SCAN_SUPPLY,		\
			.scan_type = {					\
				.sign = 'u',				\
				.realbits = 12,				\
				.storagebits = 16,			\
			},						\
		}, {							\
			.type = IIO_VOLTAGE,				\
			.indexed = 1,					\
			.channel = 1,					\
			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
			.address = in_aux,				\
			.scan_index = ADIS16260_SCAN_AUX_ADC,		\
			.scan_type = {					\
				.sign = 'u',				\
				.realbits = 12,				\
				.storagebits = 16,			\
			},						\
		},							\
		IIO_CHAN_SOFT_TIMESTAMP(5),				\
	}

static const ADIS16260_GYRO_CHANNEL_SET(x, IIO_MOD_X);
static const ADIS16260_GYRO_CHANNEL_SET(y, IIO_MOD_Y);
static const ADIS16260_GYRO_CHANNEL_SET(z, IIO_MOD_Z);

static const u8 adis16260_addresses[5][3] = {
	[gyro] = { ADIS16260_GYRO_OUT,
		   ADIS16260_GYRO_OFF,
		   ADIS16260_GYRO_SCALE },
	[angle] = { ADIS16260_ANGL_OUT },
	[in_supply] = { ADIS16260_SUPPLY_OUT },
	[in_aux] = { ADIS16260_AUX_ADC },
	[temp] = { ADIS16260_TEMP_OUT },
};
static int adis16260_read_raw(struct iio_dev *indio_dev,
			      struct iio_chan_spec const *chan,
			      int *val, int *val2,
			      long mask)
{
	struct adis16260_state *st = iio_priv(indio_dev);
	int ret;
	int bits;
	u8 addr;
	s16 val16;

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
		mutex_lock(&indio_dev->mlock);
		addr = adis16260_addresses[chan->address][0];
		ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16);
		if (ret) {
			mutex_unlock(&indio_dev->mlock);
			return ret;
		}

		if (val16 & ADIS16260_ERROR_ACTIVE) {
			ret = adis16260_check_status(indio_dev);
			if (ret) {
				mutex_unlock(&indio_dev->mlock);
				return ret;
			}
		}
		val16 = val16 & ((1 << chan->scan_type.realbits) - 1);
		if (chan->scan_type.sign == 's')
			val16 = (s16)(val16 <<
				      (16 - chan->scan_type.realbits)) >>
				(16 - chan->scan_type.realbits);
		*val = val16;
		mutex_unlock(&indio_dev->mlock);
		return IIO_VAL_INT;
	case IIO_CHAN_INFO_SCALE:
		switch (chan->type) {
		case IIO_ANGL_VEL:
			*val = 0;
			if (spi_get_device_id(st->us)->driver_data)
				*val2 = 320;
			else
				*val2 = 1278;
			return IIO_VAL_INT_PLUS_MICRO;
		case IIO_VOLTAGE:
			*val = 0;
			if (chan->channel == 0)
				*val2 = 18315;
			else
				*val2 = 610500;
			return IIO_VAL_INT_PLUS_MICRO;
		case IIO_TEMP:
			*val = 0;
			*val2 = 145300;
			return IIO_VAL_INT_PLUS_MICRO;
		default:
			return -EINVAL;
		}
		break;
	case IIO_CHAN_INFO_OFFSET:
		*val = 25;
		return IIO_VAL_INT;
	case IIO_CHAN_INFO_CALIBBIAS:
		switch (chan->type) {
		case IIO_ANGL_VEL:
			bits = 12;
			break;
		default:
			return -EINVAL;
		};
		mutex_lock(&indio_dev->mlock);
		addr = adis16260_addresses[chan->address][1];
		ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16);
		if (ret) {
			mutex_unlock(&indio_dev->mlock);
			return ret;
		}
		val16 &= (1 << bits) - 1;
		val16 = (s16)(val16 << (16 - bits)) >> (16 - bits);
		*val = val16;
		mutex_unlock(&indio_dev->mlock);
		return IIO_VAL_INT;
	case IIO_CHAN_INFO_CALIBSCALE:
		switch (chan->type) {
		case IIO_ANGL_VEL:
			bits = 12;
			break;
		default:
			return -EINVAL;
		};
		mutex_lock(&indio_dev->mlock);
		addr = adis16260_addresses[chan->address][2];
		ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16);
		if (ret) {
			mutex_unlock(&indio_dev->mlock);
			return ret;
		}
		*val = (1 << bits) - 1;
		mutex_unlock(&indio_dev->mlock);
		return IIO_VAL_INT;
	}
	return -EINVAL;
}

static int adis16260_write_raw(struct iio_dev *indio_dev,
			       struct iio_chan_spec const *chan,
			       int val,
			       int val2,
			       long mask)
{
	int bits = 12;
	s16 val16;
	u8 addr;
	switch (mask) {
	case IIO_CHAN_INFO_CALIBBIAS:
		val16 = val & ((1 << bits) - 1);
		addr = adis16260_addresses[chan->address][1];
		return adis16260_spi_write_reg_16(indio_dev, addr, val16);
	case IIO_CHAN_INFO_CALIBSCALE:
		val16 = val & ((1 << bits) - 1);
		addr = adis16260_addresses[chan->address][2];
		return adis16260_spi_write_reg_16(indio_dev, addr, val16);
	}
	return -EINVAL;
}

static struct attribute *adis16260_attributes[] = {
	&iio_dev_attr_sampling_frequency.dev_attr.attr,
	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
	&iio_dev_attr_reset.dev_attr.attr,
	NULL
};

static const struct attribute_group adis16260_attribute_group = {
	.attrs = adis16260_attributes,
};

static const struct iio_info adis16260_info = {
	.attrs = &adis16260_attribute_group,
	.read_raw = &adis16260_read_raw,
	.write_raw = &adis16260_write_raw,
	.driver_module = THIS_MODULE,
};

static int __devinit adis16260_probe(struct spi_device *spi)
{
	int ret;
	struct adis16260_platform_data *pd = spi->dev.platform_data;
	struct adis16260_state *st;
	struct iio_dev *indio_dev;

	/* setup the industrialio driver allocated elements */
	indio_dev = iio_device_alloc(sizeof(*st));
	if (indio_dev == NULL) {
		ret = -ENOMEM;
		goto error_ret;
	}
	st = iio_priv(indio_dev);
	if (pd)
		st->negate = pd->negate;
	/* this is only used for removal purposes */
	spi_set_drvdata(spi, st);

	st->us = spi;
	mutex_init(&st->buf_lock);

	indio_dev->name = spi_get_device_id(st->us)->name;
	indio_dev->dev.parent = &spi->dev;
	indio_dev->info = &adis16260_info;
	indio_dev->num_channels
		= ARRAY_SIZE(adis16260_channels_x);
	if (pd && pd->direction)
		switch (pd->direction) {
		case 'x':
			indio_dev->channels = adis16260_channels_x;
			break;
		case 'y':
			indio_dev->channels = adis16260_channels_y;
			break;
		case 'z':
			indio_dev->channels = adis16260_channels_z;
			break;
		default:
			return -EINVAL;
		}
	else
		indio_dev->channels = adis16260_channels_x;
	indio_dev->num_channels = ARRAY_SIZE(adis16260_channels_x);
	indio_dev->modes = INDIO_DIRECT_MODE;

	ret = adis16260_configure_ring(indio_dev);
	if (ret)
		goto error_free_dev;

	ret = iio_buffer_register(indio_dev,
				  indio_dev->channels,
				  ARRAY_SIZE(adis16260_channels_x));
	if (ret) {
		printk(KERN_ERR "failed to initialize the ring\n");
		goto error_unreg_ring_funcs;
	}
	if (indio_dev->buffer) {
		/* Set default scan mode */
		iio_scan_mask_set(indio_dev, indio_dev->buffer,
				  ADIS16260_SCAN_SUPPLY);
		iio_scan_mask_set(indio_dev, indio_dev->buffer,
				  ADIS16260_SCAN_GYRO);
		iio_scan_mask_set(indio_dev, indio_dev->buffer,
				  ADIS16260_SCAN_AUX_ADC);
		iio_scan_mask_set(indio_dev, indio_dev->buffer,
				  ADIS16260_SCAN_TEMP);
		iio_scan_mask_set(indio_dev, indio_dev->buffer,
				  ADIS16260_SCAN_ANGL);
	}
	if (spi->irq) {
		ret = adis16260_probe_trigger(indio_dev);
		if (ret)
			goto error_uninitialize_ring;
	}

	/* Get the device into a sane initial state */
	ret = adis16260_initial_setup(indio_dev);
	if (ret)
		goto error_remove_trigger;
	ret = iio_device_register(indio_dev);
	if (ret)
		goto error_remove_trigger;

	return 0;

error_remove_trigger:
	adis16260_remove_trigger(indio_dev);
error_uninitialize_ring:
	iio_buffer_unregister(indio_dev);
error_unreg_ring_funcs:
	adis16260_unconfigure_ring(indio_dev);
error_free_dev:
	iio_device_free(indio_dev);
error_ret:
	return ret;
}

static int adis16260_remove(struct spi_device *spi)
{
	int ret;
	struct iio_dev *indio_dev = spi_get_drvdata(spi);

	iio_device_unregister(indio_dev);

	ret = adis16260_stop_device(indio_dev);
	if (ret)
		goto err_ret;

	flush_scheduled_work();

	adis16260_remove_trigger(indio_dev);
	iio_buffer_unregister(indio_dev);
	adis16260_unconfigure_ring(indio_dev);
	iio_device_free(indio_dev);

err_ret:
	return ret;
}

/*
 * These parts do not need to be differentiated until someone adds
 * support for the on chip filtering.
 */
static const struct spi_device_id adis16260_id[] = {
	{"adis16260", 0},
	{"adis16265", 0},
	{"adis16250", 0},
	{"adis16255", 0},
	{"adis16251", 1},
	{}
};
MODULE_DEVICE_TABLE(spi, adis16260_id);

static struct spi_driver adis16260_driver = {
	.driver = {
		.name = "adis16260",
		.owner = THIS_MODULE,
	},
	.probe = adis16260_probe,
	.remove = __devexit_p(adis16260_remove),
	.id_table = adis16260_id,
};
module_spi_driver(adis16260_driver);

MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16260/5 Digital Gyroscope Sensor");
MODULE_LICENSE("GPL v2");