diff --git a/configure.ac b/configure.ac
index f8affed..52d6b54 100644
--- a/configure.ac
+++ b/configure.ac
@@ -155,8 +155,7 @@
 
 AC_CONFIG_FILES([Makefile extensions/GNUmakefile include/Makefile
 	iptables/Makefile iptables/xtables.pc
-	iptables/iptables.8 iptables/ip6tables.8
-	iptables/iptables-extensions.8.tmpl
+	iptables/iptables.8 iptables/iptables-extensions.8.tmpl
 	libipq/Makefile libipq/libipq.pc
 	libiptc/Makefile libiptc/libiptc.pc
 	libiptc/libip4tc.pc libiptc/libip6tc.pc
diff --git a/extensions/libxt_NFQUEUE.man b/extensions/libxt_NFQUEUE.man
index 7a99129..1bfb7b8 100644
--- a/extensions/libxt_NFQUEUE.man
+++ b/extensions/libxt_NFQUEUE.man
@@ -1,11 +1,12 @@
-This target is an extension of the QUEUE target. As opposed to QUEUE, it allows
-you to put a packet into any specific queue, identified by its 16-bit queue
-number.
-It can only be used with Kernel versions 2.6.14 or later, since it requires
-the
+This target passes the packet to userspace using the
+\fBnfnetlink_queue\fP handler.  The packet is put into the queue
+identified by its 16-bit queue number.  Userspace can inspect
+and modify the packet if desired. Userspace must then drop or
+reinject the packet into the kernel.  Please see libnetfilter_queue
+for details.
 .B
 nfnetlink_queue
-kernel support. The \fBqueue-balance\fP option was added in Linux 2.6.31,
+was added in Linux 2.6.14. The \fBqueue-balance\fP option was added in Linux 2.6.31,
 \fBqueue-bypass\fP in 2.6.39.
 .TP
 \fB\-\-queue\-num\fP \fIvalue\fP
diff --git a/extensions/libxt_socket.c b/extensions/libxt_socket.c
index 3901649..f19c280 100644
--- a/extensions/libxt_socket.c
+++ b/extensions/libxt_socket.c
@@ -9,6 +9,7 @@
 
 enum {
 	O_TRANSPARENT = 0,
+	O_NOWILDCARD = 1,
 };
 
 static const struct xt_option_entry socket_mt_opts[] = {
@@ -16,6 +17,12 @@
 	XTOPT_TABLEEND,
 };
 
+static const struct xt_option_entry socket_mt_opts_v2[] = {
+	{.name = "transparent", .id = O_TRANSPARENT, .type = XTTYPE_NONE},
+	{.name = "nowildcard", .id = O_NOWILDCARD, .type = XTTYPE_NONE},
+	XTOPT_TABLEEND,
+};
+
 static void socket_mt_help(void)
 {
 	printf(
@@ -23,6 +30,14 @@
 		"  --transparent    Ignore non-transparent sockets\n\n");
 }
 
+static void socket_mt_help_v2(void)
+{
+	printf(
+		"socket match options:\n"
+		"  --nowildcard     Do not ignore LISTEN sockets bound on INADDR_ANY\n"
+		"  --transparent    Ignore non-transparent sockets\n\n");
+}
+
 static void socket_mt_parse(struct xt_option_call *cb)
 {
 	struct xt_socket_mtinfo1 *info = cb->data;
@@ -35,6 +50,21 @@
 	}
 }
 
+static void socket_mt_parse_v2(struct xt_option_call *cb)
+{
+	struct xt_socket_mtinfo2 *info = cb->data;
+
+	xtables_option_parse(cb);
+	switch (cb->entry->id) {
+	case O_TRANSPARENT:
+		info->flags |= XT_SOCKET_TRANSPARENT;
+		break;
+	case O_NOWILDCARD:
+		info->flags |= XT_SOCKET_NOWILDCARD;
+		break;
+	}
+}
+
 static void
 socket_mt_save(const void *ip, const struct xt_entry_match *match)
 {
@@ -52,6 +82,25 @@
 	socket_mt_save(ip, match);
 }
 
+static void
+socket_mt_save_v2(const void *ip, const struct xt_entry_match *match)
+{
+	const struct xt_socket_mtinfo2 *info = (const void *)match->data;
+
+	if (info->flags & XT_SOCKET_TRANSPARENT)
+		printf(" --transparent");
+	if (info->flags & XT_SOCKET_NOWILDCARD)
+		printf(" --nowildcard");
+}
+
+static void
+socket_mt_print_v2(const void *ip, const struct xt_entry_match *match,
+		   int numeric)
+{
+	printf(" socket");
+	socket_mt_save_v2(ip, match);
+}
+
 static struct xtables_match socket_mt_reg[] = {
 	{
 		.name          = "socket",
@@ -74,6 +123,19 @@
 		.x6_parse      = socket_mt_parse,
 		.x6_options    = socket_mt_opts,
 	},
+	{
+		.name          = "socket",
+		.revision      = 2,
+		.family        = NFPROTO_UNSPEC,
+		.version       = XTABLES_VERSION,
+		.size          = XT_ALIGN(sizeof(struct xt_socket_mtinfo2)),
+		.userspacesize = XT_ALIGN(sizeof(struct xt_socket_mtinfo2)),
+		.help          = socket_mt_help_v2,
+		.print         = socket_mt_print_v2,
+		.save          = socket_mt_save_v2,
+		.x6_parse      = socket_mt_parse_v2,
+		.x6_options    = socket_mt_opts_v2,
+	},
 };
 
 void _init(void)
diff --git a/extensions/libxt_socket.man b/extensions/libxt_socket.man
index 41e8d67..2ef32ce 100644
--- a/extensions/libxt_socket.man
+++ b/extensions/libxt_socket.man
@@ -1,5 +1,22 @@
-This matches if an open socket can be found by doing a socket lookup on the
-packet.
+This matches if an open TCP/UDP socket can be found by doing a socket lookup on the
+packet. It matches if there is an established or non\-zero bound listening
+socket (possibly with a non\-local address). The lookup is performed using
+the \fBpacket\fP tuple of TCP/UDP packets, or the original TCP/UDP header
+\fBembedded\fP in an ICMP/ICPMv6 error packet.
 .TP
 \fB\-\-transparent\fP
 Ignore non-transparent sockets.
+.TP
+\fB\-\-nowildcard\fP
+Do not ignore sockets bound to 'any' address.
+The socket match won't accept zero\-bound listeners by default, since
+then local services could intercept traffic that would otherwise be forwarded.
+This option therefore has security implications when used to match traffic being
+forwarded to redirect such packets to local machine with policy routing.
+When using the socket match to implement fully transparent
+proxies bound to non\-local addresses it is recommended to use the \-\-transparent
+option instead.
+.PP
+Example (assuming packets with mark 1 are delivered locally):
+.IP
+\-t mangle \-A PREROUTING \-m socket \-\-transparent \-j MARK \-\-set\-mark 1
diff --git a/include/linux/netfilter/xt_socket.h b/include/linux/netfilter/xt_socket.h
index 26d7217..6315e2a 100644
--- a/include/linux/netfilter/xt_socket.h
+++ b/include/linux/netfilter/xt_socket.h
@@ -5,10 +5,17 @@
 
 enum {
 	XT_SOCKET_TRANSPARENT = 1 << 0,
+	XT_SOCKET_NOWILDCARD = 1 << 1,
 };
 
 struct xt_socket_mtinfo1 {
 	__u8 flags;
 };
+#define XT_SOCKET_FLAGS_V1 XT_SOCKET_TRANSPARENT
+
+struct xt_socket_mtinfo2 {
+	__u8 flags;
+};
+#define XT_SOCKET_FLAGS_V2 (XT_SOCKET_TRANSPARENT | XT_SOCKET_NOWILDCARD)
 
 #endif /* _XT_SOCKET_H */
diff --git a/include/xtables.h b/include/xtables.h
index c35a6e6..0217267 100644
--- a/include/xtables.h
+++ b/include/xtables.h
@@ -230,7 +230,7 @@
 	/* Size of match data. */
 	size_t size;
 
-	/* Size of match data relevent for userspace comparison purposes */
+	/* Size of match data relevant for userspace comparison purposes */
 	size_t userspacesize;
 
 	/* Function which prints out usage message. */
@@ -308,7 +308,7 @@
 	/* Size of target data. */
 	size_t size;
 
-	/* Size of target data relevent for userspace comparison purposes */
+	/* Size of target data relevant for userspace comparison purposes */
 	size_t userspacesize;
 
 	/* Function which prints out usage message. */
diff --git a/iptables/.gitignore b/iptables/.gitignore
index c9c3178..31baf7d 100644
--- a/iptables/.gitignore
+++ b/iptables/.gitignore
@@ -1,5 +1,4 @@
 /ip6tables
-/ip6tables.8
 /ip6tables-save
 /ip6tables-restore
 /ip6tables-static
diff --git a/iptables/Makefile.am b/iptables/Makefile.am
index 501e825..a4246eb 100644
--- a/iptables/Makefile.am
+++ b/iptables/Makefile.am
@@ -28,7 +28,7 @@
 man_MANS         = iptables.8 iptables-restore.8 iptables-save.8 \
                    iptables-xml.1 ip6tables.8 ip6tables-restore.8 \
                    ip6tables-save.8 iptables-extensions.8
-CLEANFILES       = iptables.8 ip6tables.8
+CLEANFILES       = iptables.8
 
 vx_bin_links   = iptables-xml
 if ENABLE_IPV4
diff --git a/iptables/ip6tables-restore.8 b/iptables/ip6tables-restore.8
index dbe19da..cf4ea3e 100644
--- a/iptables/ip6tables-restore.8
+++ b/iptables/ip6tables-restore.8
@@ -1,68 +1 @@
-.TH IP6TABLES-RESTORE 8 "Jan 30, 2002" "" ""
-.\"
-.\" Man page written by Harald Welte <laforge@gnumonks.org>
-.\" It is based on the iptables man page.
-.\"
-.\"	This program is free software; you can redistribute it and/or modify
-.\"	it under the terms of the GNU General Public License as published by
-.\"	the Free Software Foundation; either version 2 of the License, or
-.\"	(at your option) any later version.
-.\"
-.\"	This program is distributed in the hope that it will be useful,
-.\"	but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\"	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-.\"	GNU General Public License for more details.
-.\"
-.\"	You should have received a copy of the GNU General Public License
-.\"	along with this program; if not, write to the Free Software
-.\"	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-.\"
-.\"
-.SH NAME
-ip6tables-restore \(em Restore IPv6 Tables
-.SH SYNOPSIS
-\fBip6tables\-restore\fP [\fB\-chntv\fP] [\fB\-M\fP \fImodprobe\fP]
-[\fB\-T\fP \fIname\fP]
-.SH DESCRIPTION
-.PP
-.B ip6tables-restore
-is used to restore IPv6 Tables from data specified on STDIN. Use 
-I/O redirection provided by your shell to read from a file
-.TP
-\fB\-c\fR, \fB\-\-counters\fR
-restore the values of all packet and byte counters
-.TP
-\fB\-h\fP, \fB\-\-help\fP
-Print a short option summary.
-.TP
-\fB\-n\fR, \fB\-\-noflush\fR 
-don't flush the previous contents of the table. If not specified,
-\fBip6tables-restore\fP flushes (deletes) all previous contents of the
-respective table.
-.TP
-\fB\-t\fP, \fB\-\-test\fP
-Only parse and construct the ruleset, but do not commit it.
-.TP
-\fB\-v\fP, \fB\-\-verbose\fP
-Print additional debug info during ruleset processing.
-.TP
-\fB\-M\fP, \fB\-\-modprobe\fP \fImodprobe_program\fP
-Specify the path to the modprobe program. By default, ip6tables-restore will
-inspect /proc/sys/kernel/modprobe to determine the executable's path.
-.TP
-\fB\-T\fP, \fB\-\-table\fP \fIname\fP
-Restore only the named table even if the input stream contains other ones.
-.B ip6tables-restore
-flushes (deletes) all previous contents of the respective IPv6 Table.
-.SH BUGS
-None known as of iptables-1.2.1 release
-.SH AUTHORS
-Harald Welte <laforge@gnumonks.org>
-.br
-Andras Kis-Szabo <kisza@sch.bme.hu>
-.SH SEE ALSO
-\fBip6tables\-save\fP(8), \fBip6tables\fP(8)
-.PP
-The iptables-HOWTO, which details more iptables usage, the NAT-HOWTO,
-which details NAT, and the netfilter-hacking-HOWTO which details the
-internals.
+.so man8/iptables-restore.8
diff --git a/iptables/ip6tables-save.8 b/iptables/ip6tables-save.8
index 457be82..182f55c 100644
--- a/iptables/ip6tables-save.8
+++ b/iptables/ip6tables-save.8
@@ -1,53 +1 @@
-.TH IP6TABLES-SAVE 8 "Jan 30, 2002" "" ""
-.\"
-.\" Man page written by Harald Welte <laforge@gnumonks.org>
-.\" It is based on the iptables man page.
-.\"
-.\"	This program is free software; you can redistribute it and/or modify
-.\"	it under the terms of the GNU General Public License as published by
-.\"	the Free Software Foundation; either version 2 of the License, or
-.\"	(at your option) any later version.
-.\"
-.\"	This program is distributed in the hope that it will be useful,
-.\"	but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\"	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-.\"	GNU General Public License for more details.
-.\"
-.\"	You should have received a copy of the GNU General Public License
-.\"	along with this program; if not, write to the Free Software
-.\"	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-.\"
-.\"
-.SH NAME
-ip6tables-save \(em dump iptables rules to stdout
-.SH SYNOPSIS
-\fBip6tables\-save\fP [\fB\-M\fP \fImodprobe\fP] [\fB\-c\fP]
-[\fB\-t\fP \fItable\fP
-.SH DESCRIPTION
-.PP
-.B ip6tables-save
-is used to dump the contents of an IPv6 Table in easily parseable format
-to STDOUT. Use I/O-redirection provided by your shell to write to a file.
-.TP
-\fB\-M\fP \fImodprobe_program\fP
-Specify the path to the modprobe program. By default, iptables-save will
-inspect /proc/sys/kernel/modprobe to determine the executable's path.
-.TP
-\fB\-c\fR, \fB\-\-counters\fR
-include the current values of all packet and byte counters in the output
-.TP
-\fB\-t\fR, \fB\-\-table\fR \fItablename\fP
-restrict output to only one table. If not specified, output includes all
-available tables.
-.SH BUGS
-None known as of iptables-1.2.1 release
-.SH AUTHORS
-Harald Welte <laforge@gnumonks.org>
-.br
-Andras Kis-Szabo <kisza@sch.bme.hu>
-.SH SEE ALSO
-\fBip6tables\-restore\fP(8), \fBip6tables\fP(8)
-.PP
-The iptables-HOWTO, which details more iptables usage, the NAT-HOWTO,
-which details NAT, and the netfilter-hacking-HOWTO which details the
-internals.
+.so man8/iptables-save.8
diff --git a/iptables/ip6tables.8 b/iptables/ip6tables.8
new file mode 100644
index 0000000..0dee41a
--- /dev/null
+++ b/iptables/ip6tables.8
@@ -0,0 +1 @@
+.so man8/iptables.8
diff --git a/iptables/ip6tables.8.in b/iptables/ip6tables.8.in
deleted file mode 100644
index 5b2a7d7..0000000
--- a/iptables/ip6tables.8.in
+++ /dev/null
@@ -1,463 +0,0 @@
-.TH IP6TABLES 8 "" "@PACKAGE_STRING@" "@PACKAGE_STRING@"
-.\"
-.\" Man page written by Andras Kis-Szabo <kisza@sch.bme.hu>
-.\" It is based on iptables man page.
-.\"
-.\" iptables page by Herve Eychenne <rv@wallfire.org>
-.\" It is based on ipchains man page.
-.\"
-.\" ipchains page by Paul ``Rusty'' Russell March 1997
-.\" Based on the original ipfwadm man page by Jos Vos <jos@xos.nl>
-.\"
-.\"	This program is free software; you can redistribute it and/or modify
-.\"	it under the terms of the GNU General Public License as published by
-.\"	the Free Software Foundation; either version 2 of the License, or
-.\"	(at your option) any later version.
-.\"
-.\"	This program is distributed in the hope that it will be useful,
-.\"	but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\"	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-.\"	GNU General Public License for more details.
-.\"
-.\"	You should have received a copy of the GNU General Public License
-.\"	along with this program; if not, write to the Free Software
-.\"	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-.\"
-.\"
-.SH NAME
-ip6tables \(em IPv6 packet filter administration
-.SH SYNOPSIS
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] {\fB\-A\fP|\fB\-C\fP|\fB\-D\fP}
-\fIchain rule-specification\fP [\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-I\fP \fIchain\fP [\fIrulenum\fP]
-\fIrule-specification\fP [\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-R\fP \fIchain rulenum
-rule-specification\fP [\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-D\fP \fIchain rulenum\fP
-[\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-S\fP [\fIchain\fP [\fIrulenum\fP]]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] {\fB\-F\fP|\fB\-L\fP|\fB\-Z\fP}
-[\fIchain\fP [\fIrulenum\fP]] [\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-N\fP \fIchain\fP
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-X\fP [\fIchain\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-P\fP \fIchain target\fP
-[\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-E\fP \fIold-chain-name new-chain-name\fP
-.SH DESCRIPTION
-\fBIp6tables\fP is used to set up, maintain, and inspect the
-tables of IPv6 packet
-filter rules in the Linux kernel.  Several different tables
-may be defined.  Each table contains a number of built-in
-chains and may also contain user-defined chains.
-.PP
-Each chain is a list of rules which can match a set of packets.  Each
-rule specifies what to do with a packet that matches.  This is called
-a `target', which may be a jump to a user-defined chain in the same
-table.
-.SH TARGETS
-A firewall rule specifies criteria for a packet and a target.  If the
-packet does not match, the next rule in the chain is the examined; if
-it does match, then the next rule is specified by the value of the
-target, which can be the name of a user-defined chain or one of the
-special values \fBACCEPT\fP, \fBDROP\fP, \fBQUEUE\fP or \fBRETURN\fP.
-.PP
-\fBACCEPT\fP means to let the packet through.
-\fBDROP\fP means to drop the packet on the floor.
-\fBQUEUE\fP means to pass the packet to userspace.
-(How the packet can be received
-by a userspace process differs by the particular queue handler.  2.4.x
-and 2.6.x kernels up to 2.6.13 include the \fBip_queue\fP
-queue handler.  Kernels 2.6.14 and later additionally include the
-\fBnfnetlink_queue\fP queue handler.  Packets with a target of QUEUE will be
-sent to queue number '0' in this case. Please also see the \fBNFQUEUE\fP
-target as described later in this man page.)
-\fBRETURN\fP means stop traversing this chain and resume at the next
-rule in the
-previous (calling) chain.  If the end of a built-in chain is reached
-or a rule in a built-in chain with target \fBRETURN\fP
-is matched, the target specified by the chain policy determines the
-fate of the packet.
-.SH TABLES
-There are currently five independent tables (which tables are present
-at any time depends on the kernel configuration options and which
-modules are present).
-.TP
-\fB\-t\fP, \fB\-\-table\fP \fItable\fP
-This option specifies the packet matching table which the command
-should operate on.  If the kernel is configured with automatic module
-loading, an attempt will be made to load the appropriate module for
-that table if it is not already there.
-
-The tables are as follows:
-.RS
-.TP .4i
-\fBfilter\fP:
-This is the default table (if no \-t option is passed). It contains
-the built-in chains \fBINPUT\fP (for packets destined to local sockets),
-\fBFORWARD\fP (for packets being routed through the box), and
-\fBOUTPUT\fP (for locally-generated packets).
-.TP
-\fBnat\fP:
-This table is consulted when a packet that creates a new
-connection is encountered.  It consists of three built-ins: \fBPREROUTING\fP
-(for altering packets as soon as they come in), \fBOUTPUT\fP
-(for altering locally-generated packets before routing), and \fBPOSTROUTING\fP
-(for altering packets as they are about to go out). Available since kernel 3.7.
-.TP
-\fBmangle\fP:
-This table is used for specialized packet alteration.  Until kernel
-2.4.17 it had two built-in chains: \fBPREROUTING\fP
-(for altering incoming packets before routing) and \fBOUTPUT\fP
-(for altering locally-generated packets before routing).
-Since kernel 2.4.18, three other built-in chains are also supported:
-\fBINPUT\fP (for packets coming into the box itself), \fBFORWARD\fP
-(for altering packets being routed through the box), and \fBPOSTROUTING\fP
-(for altering packets as they are about to go out).
-.TP
-\fBraw\fP:
-This table is used mainly for configuring exemptions from connection
-tracking in combination with the NOTRACK target.  It registers at the netfilter
-hooks with higher priority and is thus called before ip_conntrack, or any other
-IP tables.  It provides the following built-in chains: \fBPREROUTING\fP
-(for packets arriving via any network interface) \fBOUTPUT\fP
-(for packets generated by local processes)
-.TP
-\fBsecurity\fP:
-This table is used for Mandatory Access Control (MAC) networking rules, such
-as those enabled by the \fBSECMARK\fP and \fBCONNSECMARK\fP targets.
-Mandatory Access Control is implemented by Linux Security Modules such as
-SELinux.  The security table is called after the filter table, allowing any
-Discretionary Access Control (DAC) rules in the filter table to take effect
-before MAC rules.  This table provides the following built-in chains:
-\fBINPUT\fP (for packets coming into the box itself),
-\fBOUTPUT\fP (for altering locally-generated packets before routing), and
-\fBFORWARD\fP (for altering packets being routed through the box).
-.RE
-.SH OPTIONS
-The options that are recognized by
-\fBip6tables\fP can be divided into several different groups.
-.SS COMMANDS
-These options specify the specific action to perform.  Only one of them
-can be specified on the command line unless otherwise specified
-below.  For all the long versions of the command and option names, you
-need to use only enough letters to ensure that
-\fBip6tables\fP can differentiate it from all other options.
-.TP
-\fB\-A\fP, \fB\-\-append\fP \fIchain rule-specification\fP
-Append one or more rules to the end of the selected chain.
-When the source and/or destination names resolve to more than one
-address, a rule will be added for each possible address combination.
-.TP
-\fB\-C\fP, \fB\-\-check\fP \fIchain rule-specification\fP
-Check whether a rule matching the specification does exist in the
-selected chain. This command uses the same logic as \fB\-D\fP to
-find a matching entry, but does not alter the existing iptables
-configuration and uses its exit code to indicate success or failure.
-.TP
-\fB\-D\fP, \fB\-\-delete\fP \fIchain rule-specification\fP
-.ns
-.TP
-\fB\-D\fP, \fB\-\-delete\fP \fIchain rulenum\fP
-Delete one or more rules from the selected chain.  There are two
-versions of this command: the rule can be specified as a number in the
-chain (starting at 1 for the first rule) or a rule to match.
-.TP
-\fB\-I\fP, \fB\-\-insert\fP \fIchain\fP [\fIrulenum\fP] \fIrule-specification\fP
-Insert one or more rules in the selected chain as the given rule
-number.  So, if the rule number is 1, the rule or rules are inserted
-at the head of the chain.  This is also the default if no rule number
-is specified.
-.TP
-\fB\-R\fP, \fB\-\-replace\fP \fIchain rulenum rule-specification\fP
-Replace a rule in the selected chain.  If the source and/or
-destination names resolve to multiple addresses, the command will
-fail.  Rules are numbered starting at 1.
-.TP
-\fB\-L\fP, \fB\-\-list\fP [\fIchain\fP]
-List all rules in the selected chain.  If no chain is selected, all
-chains are listed. Like every other ip6tables command, it applies to the
-specified table (filter is the default).
-.IP ""
-Please note that it is often used with the \fB\-n\fP
-option, in order to avoid long reverse DNS lookups.
-It is legal to specify the \fB\-Z\fP
-(zero) option as well, in which case the chain(s) will be atomically
-listed and zeroed.  The exact output is affected by the other
-arguments given. The exact rules are suppressed until you use
-.nf
- ip6tables \-L \-v
-.fi
-.TP
-\fB\-S\fP, \fB\-\-list\-rules\fP [\fIchain\fP]
-Print all rules in the selected chain.  If no chain is selected, all
-chains are printed like ip6tables-save. Like every other ip6tables command,
-it applies to the specified table (filter is the default).
-.TP
-\fB\-F\fP, \fB\-\-flush\fP [\fIchain\fP]
-Flush the selected chain (all the chains in the table if none is given).
-This is equivalent to deleting all the rules one by one.
-.TP
-\fB\-Z\fP, \fB\-\-zero\fP [\fIchain\fP [\fIrulenum\fP]]
-Zero the packet and byte counters in all chains, or only the given chain,
-or only the given rule in a chain. It is legal to
-specify the
-\fB\-L\fP, \fB\-\-list\fP
-(list) option as well, to see the counters immediately before they are
-cleared. (See above.)
-.TP
-\fB\-N\fP, \fB\-\-new\-chain\fP \fIchain\fP
-Create a new user-defined chain by the given name.  There must be no
-target of that name already.
-.TP
-\fB\-X\fP, \fB\-\-delete\-chain\fP [\fIchain\fP]
-Delete the optional user-defined chain specified.  There must be no references
-to the chain.  If there are, you must delete or replace the referring rules
-before the chain can be deleted.  The chain must be empty, i.e. not contain
-any rules.  If no argument is given, it will attempt to delete every
-non-builtin chain in the table.
-.TP
-\fB\-P\fP, \fB\-\-policy\fP \fIchain target\fP
-Set the policy for the chain to the given target.  See the section \fBTARGETS\fP
-for the legal targets.  Only built-in (non-user-defined) chains can have
-policies, and neither built-in nor user-defined chains can be policy
-targets.
-.TP
-\fB\-E\fP, \fB\-\-rename\-chain\fP \fIold\-chain new\-chain\fP
-Rename the user specified chain to the user supplied name.  This is
-cosmetic, and has no effect on the structure of the table.
-.TP
-\fB\-A\fP, \fB\-\-append\fP \fIchain rule-specification\fP
-Append one or more rules to the end of the selected chain.
-When the source and/or destination names resolve to more than one
-address, a rule will be added for each possible address combination.
-.TP
-\fB\-h\fP
-Help.
-Give a (currently very brief) description of the command syntax.
-.SS PARAMETERS
-The following parameters make up a rule specification (as used in the
-add, delete, insert, replace and append commands).
-.TP
-\fB\-4\fP, \fB\-\-ipv4\fP
-If a rule using the \fB\-4\fP option is inserted with (and only with)
-ip6tables-restore, it will be silently ignored. Any other uses will throw an
-error. This option allows to put both IPv4 and IPv6 rules in a single rule file
-for use with both iptables-restore and ip6tables-restore.
-.TP
-\fB\-6\fP, \fB\-\-ipv6\fP
-This option has no effect in ip6tables and ip6tables-restore.
-.TP
-[\fB!\fP] \fB\-p\fP, \fB\-\-protocol\fP \fIprotocol\fP
-The protocol of the rule or of the packet to check.
-The specified protocol can be one of \fBtcp\fP, \fBudp\fP, \fBudplite\fP,
-\fBicmpv6\fP, \fBesp\fP, \fBmh\fP or the special keyword "\fBall\fP",
-or it can be a numeric value, representing one of these protocols or a
-different one. A protocol name from /etc/protocols is also allowed.
-But IPv6 extension headers except \fBesp\fP are not allowed.
-\fBesp\fP and \fBipv6\-nonext\fP
-can be used with Kernel version 2.6.11 or later.
-A "!" argument before the protocol inverts the
-test.  The number zero is equivalent to \fBall\fP, which means that you cannot
-test the protocol field for the value 0 directly. To match on a HBH header,
-even if it were the last, you cannot use \fB\-p 0\fP, but always need
-\fB\-m hbh\fP.
-"\fBall\fP"
-will match with all protocols and is taken as default when this
-option is omitted.
-.TP
-[\fB!\fP] \fB\-s\fP, \fB\-\-source\fP \fIaddress\fP[\fB/\fP\fImask\fP]
-Source specification.
-\fIAddress\fP can be either be a hostname,
-a network IP address (with \fB/\fP\fImask\fP), or a plain IP address.
-Names will be resolved once only, before the rule is submitted to the kernel.
-Please note that specifying any name to be resolved with a remote query such as
-DNS is a really bad idea.
-(Resolving network names is not supported at this time.)
-The \fImask\fP is a plain number,
-specifying the number of 1's at the left side of the network mask.
-A "!" argument before the address specification inverts the sense of
-the address. The flag \fB\-\-src\fP
-is an alias for this option.
-Multiple addresses can be specified, but this will \fBexpand to multiple
-rules\fP (when adding with \-A), or will cause multiple rules to be
-deleted (with \-D).
-.TP
-[\fB!\fP] \fB\-d\fP, \fB\-\-destination\fP \fIaddress\fP[\fB/\fP\fImask\fP]
-Destination specification. 
-See the description of the \fB\-s\fP
-(source) flag for a detailed description of the syntax.  The flag
-\fB\-\-dst\fP is an alias for this option.
-.TP
-\fB\-m\fP, \fB\-\-match\fP \fImatch\fP
-Specifies a match to use, that is, an extension module that tests for a
-specific property. The set of matches make up the condition under which a
-target is invoked. Matches are evaluated first to last as specified on the
-command line and work in short-circuit fashion, i.e. if one extension yields
-false, evaluation will stop.
-.TP
-\fB\-j\fP, \fB\-\-jump\fP \fItarget\fP
-This specifies the target of the rule; i.e., what to do if the packet
-matches it.  The target can be a user-defined chain (other than the
-one this rule is in), one of the special builtin targets which decide
-the fate of the packet immediately, or an extension (see \fBEXTENSIONS\fP
-below).  If this
-option is omitted in a rule (and \fB\-g\fP
-is not used), then matching the rule will have no
-effect on the packet's fate, but the counters on the rule will be
-incremented.
-.TP
-\fB\-g\fP, \fB\-\-goto\fP \fIchain\fP
-This specifies that the processing should continue in a user
-specified chain. Unlike the \-\-jump option return will not continue
-processing in this chain but instead in the chain that called us via
-\-\-jump.
-.TP
-[\fB!\fP] \fB\-i\fP, \fB\-\-in\-interface\fP \fIname\fP
-Name of an interface via which a packet was received (only for
-packets entering the \fBINPUT\fP, \fBFORWARD\fP and \fBPREROUTING\fP
-chains).  When the "!" argument is used before the interface name, the
-sense is inverted.  If the interface name ends in a "+", then any
-interface which begins with this name will match.  If this option is
-omitted, any interface name will match.
-.TP
-[\fB!\fP] \fB\-o\fP, \fB\-\-out\-interface\fP \fIname\fP
-Name of an interface via which a packet is going to be sent (for packets
-entering the \fBFORWARD\fP, \fBOUTPUT\fP and \fBPOSTROUTING\fP
-chains).  When the "!" argument is used before the interface name, the
-sense is inverted.  If the interface name ends in a "+", then any
-interface which begins with this name will match.  If this option is
-omitted, any interface name will match.
-.\" Currently not supported (header-based)
-.\" .TP
-.\" [\fB!\fP] \fB\-f\fP, \fB\-\-fragment\fP
-.\" This means that the rule only refers to second and further fragments
-.\" of fragmented packets.  Since there is no way to tell the source or
-.\" destination ports of such a packet (or ICMP type), such a packet will
-.\" not match any rules which specify them.  When the "!" argument
-.\" precedes the "\-f" flag, the rule will only match head fragments, or
-.\" unfragmented packets.
-.TP
-\fB\-c\fP, \fB\-\-set\-counters\fP \fIpackets bytes\fP
-This enables the administrator to initialize the packet and byte
-counters of a rule (during \fBINSERT\fP, \fBAPPEND\fP, \fBREPLACE\fP
-operations).
-.SS "OTHER OPTIONS"
-The following additional options can be specified:
-.TP
-\fB\-v\fP, \fB\-\-verbose\fP
-Verbose output.  This option makes the list command show the interface
-name, the rule options (if any), and the TOS masks.  The packet and
-byte counters are also listed, with the suffix 'K', 'M' or 'G' for
-1000, 1,000,000 and 1,000,000,000 multipliers respectively (but see
-the \fB\-x\fP flag to change this).
-For appending, insertion, deletion and replacement, this causes
-detailed information on the rule or rules to be printed. \fB\-v\fP may be
-specified multiple times to possibly emit more detailed debug statements.
-.TP
-\fB\-w\fP, \fB\-\-wait\fP
-Wait for the xtables lock.
-To prevent multiple instances of the program from running concurrently,
-an attempt will be made to obtain an exclusive lock at launch.  By default,
-the program will exit if the lock cannot be obtained.  This option will
-make the program wait until the exclusive lock can be obtained.
-.TP
-\fB\-n\fP, \fB\-\-numeric\fP
-Numeric output.
-IP addresses and port numbers will be printed in numeric format.
-By default, the program will try to display them as host names,
-network names, or services (whenever applicable).
-.TP
-\fB\-x\fP, \fB\-\-exact\fP
-Expand numbers.
-Display the exact value of the packet and byte counters,
-instead of only the rounded number in K's (multiples of 1000)
-M's (multiples of 1000K) or G's (multiples of 1000M).  This option is
-only relevant for the \fB\-L\fP command.
-.TP
-\fB\-\-line\-numbers\fP
-When listing rules, add line numbers to the beginning of each rule,
-corresponding to that rule's position in the chain.
-.TP
-\fB\-\-modprobe=\fP\fIcommand\fP
-When adding or inserting rules into a chain, use \fIcommand\fP
-to load any necessary modules (targets, match extensions, etc).
-.SH MATCH EXTENSIONS
-.PP
-iptables can use extended packet matching and target modules.
-A list of these is available in the \fBiptables\-extensions\fP(8) manpage.
-.SH DIAGNOSTICS
-Various error messages are printed to standard error.  The exit code
-is 0 for correct functioning.  Errors which appear to be caused by
-invalid or abused command line parameters cause an exit code of 2, and
-other errors cause an exit code of 1.
-.SH BUGS
-Bugs?  What's this? ;-)
-Well... the counters are not reliable on sparc64.
-.SH COMPATIBILITY WITH IPCHAINS
-This \fBip6tables\fP
-is very similar to ipchains by Rusty Russell.  The main difference is
-that the chains \fBINPUT\fP and \fBOUTPUT\fP
-are only traversed for packets coming into the local host and
-originating from the local host respectively.  Hence every packet only
-passes through one of the three chains (except loopback traffic, which
-involves both INPUT and OUTPUT chains); previously a forwarded packet
-would pass through all three.
-.PP
-The other main difference is that \fB\-i\fP refers to the input interface;
-\fB\-o\fP refers to the output interface, and both are available for packets
-entering the \fBFORWARD\fP chain.
-There are several other changes in ip6tables.
-.SH SEE ALSO
-\fBip6tables\-save\fP(8),
-\fBip6tables\-restore\fP(8),
-\fBiptables\fP(8),
-\fBiptables\-apply\fP(8),
-\fBiptables\-extensions\fP(8),
-\fBiptables\-save\fP(8),
-\fBiptables\-restore\fP(8),
-\fBlibipq\fP(3).
-.PP
-The packet-filtering-HOWTO details iptables usage for
-packet filtering,
-the netfilter-extensions-HOWTO details the extensions that are
-not in the standard distribution,
-and the netfilter-hacking-HOWTO details the netfilter internals.
-.br
-See
-.BR "http://www.netfilter.org/" .
-.SH AUTHORS
-Rusty Russell wrote iptables, in early consultation with Michael
-Neuling.
-.PP
-Marc Boucher made Rusty abandon ipnatctl by lobbying for a generic packet
-selection framework in iptables, then wrote the mangle table, the owner match,
-the mark stuff, and ran around doing cool stuff everywhere.
-.PP
-James Morris wrote the TOS target, and tos match.
-.PP
-Jozsef Kadlecsik wrote the REJECT target.
-.PP
-Harald Welte wrote the ULOG and NFQUEUE target, the new libiptc, as well as TTL match+target and libipulog.
-.PP
-The Netfilter Core Team is: Marc Boucher, Martin Josefsson, Yasuyuki Kozakai,
-Jozsef Kadlecsik, Patrick McHardy, James Morris, Pablo Neira Ayuso,
-Harald Welte and Rusty Russell.
-.PP
-ip6tables man page created by Andras Kis-Szabo, based on
-iptables man page written by Herve Eychenne <rv@wallfire.org>.
-.\" .. and did I mention that we are incredibly cool people?
-.\" .. sexy, too ..
-.\" .. witty, charming, powerful ..
-.\" .. and most of all, modest ..
-.SH VERSION
-.PP
-This manual page applies to ip6tables @PACKAGE_VERSION@.
diff --git a/iptables/iptables-restore.8 b/iptables/iptables-restore.8
index 2b1d102..8567147 100644
--- a/iptables/iptables-restore.8
+++ b/iptables/iptables-restore.8
@@ -20,13 +20,19 @@
 .\"
 .SH NAME
 iptables-restore \(em Restore IP Tables
+.P
+ip6tables-restore \(em Restore IPv6 Tables
 .SH SYNOPSIS
 \fBiptables\-restore\fP [\fB\-chntv\fP] [\fB\-M\fP \fImodprobe\fP]
+.P
+\fBip6tables\-restore\fP [\fB\-chntv\fP] [\fB\-M\fP \fImodprobe\fP]
 [\fB\-T\fP \fIname\fP]
 .SH DESCRIPTION
 .PP
 .B iptables-restore
-is used to restore IP Tables from data specified on STDIN. Use 
+and
+.B ip6tables-restore
+are used to restore IP and IPv6 Tables from data specified on STDIN. Use
 I/O redirection provided by your shell to read from a file
 .TP
 \fB\-c\fR, \fB\-\-counters\fR
@@ -35,10 +41,9 @@
 \fB\-h\fP, \fB\-\-help\fP
 Print a short option summary.
 .TP
-\fB\-n\fR, \fB\-\-noflush\fR 
-don't flush the previous contents of the table. If not specified, 
-.B iptables-restore
-flushes (deletes) all previous contents of the respective table.
+\fB\-n\fR, \fB\-\-noflush\fR
+don't flush the previous contents of the table. If not specified,
+both commands flush (delete) all previous contents of the respective table.
 .TP
 \fB\-t\fP, \fB\-\-test\fP
 Only parse and construct the ruleset, but do not commit it.
@@ -54,8 +59,11 @@
 Restore only the named table even if the input stream contains other ones.
 .SH BUGS
 None known as of iptables-1.2.1 release
-.SH AUTHOR
-Harald Welte <laforge@gnumonks.org>
+.SH AUTHORS
+Harald Welte <laforge@gnumonks.org> wrote iptables-restore based on code
+from Rusty Russell.
+.br
+Andras Kis-Szabo <kisza@sch.bme.hu> contributed ip6tables-restore.
 .SH SEE ALSO
 \fBiptables\-save\fP(8), \fBiptables\fP(8)
 .PP
diff --git a/iptables/iptables-save.8 b/iptables/iptables-save.8
index c2e0a94..d796a96 100644
--- a/iptables/iptables-save.8
+++ b/iptables/iptables-save.8
@@ -20,13 +20,20 @@
 .\"
 .SH NAME
 iptables-save \(em dump iptables rules to stdout
+.P
+ip6tables-save \(em dump iptables rules to stdout
 .SH SYNOPSIS
 \fBiptables\-save\fP [\fB\-M\fP \fImodprobe\fP] [\fB\-c\fP]
 [\fB\-t\fP \fItable\fP]
+.P
+\fBip6tables\-save\fP [\fB\-M\fP \fImodprobe\fP] [\fB\-c\fP]
+[\fB\-t\fP \fItable\fP
 .SH DESCRIPTION
 .PP
 .B iptables-save
-is used to dump the contents of an IP Table in easily parseable format
+and
+.B ip6tables-save
+are used to dump the contents of IP or IPv6 Table in easily parseable format
 to STDOUT. Use I/O-redirection provided by your shell to write to a file.
 .TP
 \fB\-M\fP \fImodprobe_program\fP
@@ -41,8 +48,12 @@
 available tables.
 .SH BUGS
 None known as of iptables-1.2.1 release
-.SH AUTHOR
+.SH AUTHORS
 Harald Welte <laforge@gnumonks.org>
+.br
+Rusty Russell <rusty@rustcorp.com.au>
+.br
+Andras Kis-Szabo <kisza@sch.bme.hu> contributed ip6tables-save.
 .SH SEE ALSO
 \fBiptables\-restore\fP(8), \fBiptables\fP(8)
 .PP
diff --git a/iptables/iptables.8.in b/iptables/iptables.8.in
index 6f31003..155c97e 100644
--- a/iptables/iptables.8.in
+++ b/iptables/iptables.8.in
@@ -23,10 +23,13 @@
 .\"
 .\"
 .SH NAME
-iptables \(em administration tool for IPv4 packet filtering and NAT
+iptables/ip6tables \(em administration tool for IPv4/IPv6 packet filtering and NAT
 .SH SYNOPSIS
 \fBiptables\fP [\fB\-t\fP \fItable\fP] {\fB\-A\fP|\fB\-C\fP|\fB\-D\fP}
 \fIchain\fP \fIrule-specification\fP
+.P
+\fBip6tables\fP [\fB\-t\fP \fItable\fP] {\fB\-A\fP|\fB\-C\fP|\fB\-D\fP}
+\fIchain rule-specification\fP
 .PP
 \fBiptables\fP [\fB\-t\fP \fItable\fP] \fB\-I\fP \fIchain\fP [\fIrulenum\fP] \fIrule-specification\fP
 .PP
@@ -52,8 +55,8 @@
 .PP
 target = \fB\-j\fP \fItargetname\fP [\fIper\-target\-options\fP]
 .SH DESCRIPTION
-\fBIptables\fP is used to set up, maintain, and inspect the
-tables of IPv4 packet
+\fBIptables\fP and \fBip6tables\fP are used to set up, maintain, and inspect the
+tables of IPv4 and IPv6 packet
 filter rules in the Linux kernel.  Several different tables
 may be defined.  Each table contains a number of built-in
 chains and may also contain user-defined chains.
@@ -64,21 +67,14 @@
 table.
 .SH TARGETS
 A firewall rule specifies criteria for a packet and a target.  If the
-packet does not match, the next rule in the chain is the examined; if
+packet does not match, the next rule in the chain is examined; if
 it does match, then the next rule is specified by the value of the
-target, which can be the name of a user-defined chain or one of the
-special values \fBACCEPT\fP, \fBDROP\fP, \fBQUEUE\fP or \fBRETURN\fP.
+target, which can be the name of a user-defined chain, one of the targets
+described in \fBiptables\-extensions\fP(8), or one of the
+special values \fBACCEPT\fP, \fBDROP\fP or \fBRETURN\fP.
 .PP
 \fBACCEPT\fP means to let the packet through.
 \fBDROP\fP means to drop the packet on the floor.
-\fBQUEUE\fP means to pass the packet to userspace.
-(How the packet can be received
-by a userspace process differs by the particular queue handler.  2.4.x
-and 2.6.x kernels up to 2.6.13 include the \fBip_queue\fP
-queue handler.  Kernels 2.6.14 and later additionally include the
-\fBnfnetlink_queue\fP queue handler.  Packets with a target of QUEUE will be
-sent to queue number '0' in this case. Please also see the \fBNFQUEUE\fP
-target as described later in this man page.)
 \fBRETURN\fP means stop traversing this chain and resume at the next
 rule in the
 previous (calling) chain.  If the end of a built-in chain is reached
@@ -111,6 +107,7 @@
 (for altering packets as soon as they come in), \fBOUTPUT\fP
 (for altering locally-generated packets before routing), and \fBPOSTROUTING\fP
 (for altering packets as they are about to go out).
+IPv6 NAT support is available since kernel 3.7.
 .TP
 \fBmangle\fP:
 This table is used for specialized packet alteration.  Until kernel
@@ -143,7 +140,7 @@
 .RE
 .SH OPTIONS
 The options that are recognized by
-\fBiptables\fP can be divided into several different groups.
+\fBiptables\fP and \fBip6tables\fP can be divided into several different groups.
 .SS COMMANDS
 These options specify the desired action to perform. Only one of them
 can be specified on the command line unless otherwise stated
@@ -245,23 +242,35 @@
 .TP
 \fB\-4\fP, \fB\-\-ipv4\fP
 This option has no effect in iptables and iptables-restore.
+If a rule using the \fB\-4\fP option is inserted with (and only with)
+ip6tables-restore, it will be silently ignored. Any other uses will throw an
+error. This option allows to put both IPv4 and IPv6 rules in a single rule file
+for use with both iptables-restore and ip6tables-restore.
 .TP
 \fB\-6\fP, \fB\-\-ipv6\fP
 If a rule using the \fB\-6\fP option is inserted with (and only with)
 iptables-restore, it will be silently ignored. Any other uses will throw an
 error. This option allows to put both IPv4 and IPv6 rules in a single rule file
 for use with both iptables-restore and ip6tables-restore.
+This option has no effect in ip6tables and ip6tables-restore.
 .TP
 [\fB!\fP] \fB\-p\fP, \fB\-\-protocol\fP \fIprotocol\fP
 The protocol of the rule or of the packet to check.
 The specified protocol can be one of \fBtcp\fP, \fBudp\fP, \fBudplite\fP,
-\fBicmp\fP, \fBesp\fP, \fBah\fP, \fBsctp\fP or the special keyword "\fBall\fP",
+\fBicmp\fP, \fBicmpv6\fP,\fBesp\fP, \fBah\fP, \fBsctp\fP, \fBmh\fP or the special keyword "\fBall\fP",
 or it can be a numeric value, representing one of these protocols or a
 different one.  A protocol name from /etc/protocols is also allowed.
 A "!" argument before the protocol inverts the
 test.  The number zero is equivalent to \fBall\fP. "\fBall\fP"
 will match with all protocols and is taken as default when this
 option is omitted.
+Note that, in ip6tables, IPv6 extension headers except \fBesp\fP are not allowed.
+\fBesp\fP and \fBipv6\-nonext\fP
+can be used with Kernel version 2.6.11 or later.
+The number zero is equivalent to \fBall\fP, which means that you cannot
+test the protocol field for the value 0 directly. To match on a HBH header,
+even if it were the last, you cannot use \fB\-p 0\fP, but always need
+\fB\-m hbh\fP.
 .TP
 [\fB!\fP] \fB\-s\fP, \fB\-\-source\fP \fIaddress\fP[\fB/\fP\fImask\fP][\fB,\fP\fI...\fP]
 Source specification. \fIAddress\fP
@@ -271,9 +280,9 @@
 Please note that specifying any name to be resolved with a remote query such as
 DNS is a really bad idea.
 The \fImask\fP
-can be either a network mask or a plain number,
+can be either an ipv4 network mask (for iptables) or a plain number,
 specifying the number of 1's at the left side of the network mask.
-Thus, a mask of \fI24\fP is equivalent to \fI255.255.255.0\fP.
+Thus, an iptables mask of \fI24\fP is equivalent to \fI255.255.255.0\fP.
 A "!" argument before the address specification inverts the sense of
 the address. The flag \fB\-\-src\fP is an alias for this option.
 Multiple addresses can be specified, but this will \fBexpand to multiple
@@ -327,12 +336,13 @@
 omitted, any interface name will match.
 .TP
 [\fB!\fP] \fB\-f\fP, \fB\-\-fragment\fP
-This means that the rule only refers to second and further fragments
+This means that the rule only refers to second and further IPv4 fragments
 of fragmented packets.  Since there is no way to tell the source or
 destination ports of such a packet (or ICMP type), such a packet will
 not match any rules which specify them.  When the "!" argument
 precedes the "\-f" flag, the rule will only match head fragments, or
-unfragmented packets.
+unfragmented packets. This option is IPv4 specific, it is not available
+in ip6tables.
 .TP
 \fB\-c\fP, \fB\-\-set\-counters\fP \fIpackets bytes\fP
 This enables the administrator to initialize the packet and byte
@@ -420,10 +430,6 @@
 \fBiptables\-save\fP(8),
 \fBiptables\-restore\fP(8),
 \fBiptables\-extensions\fP(8),
-\fBip6tables\fP(8),
-\fBip6tables\-save\fP(8),
-\fBip6tables\-restore\fP(8),
-\fBlibipq\fP(3).
 .PP
 The packet-filtering-HOWTO details iptables usage for
 packet filtering, the NAT-HOWTO details NAT,
@@ -458,4 +464,4 @@
 .\" .. and most of all, modest ..
 .SH VERSION
 .PP
-This manual page applies to iptables @PACKAGE_VERSION@.
+This manual page applies to iptables/ip6tables @PACKAGE_AND_VERSION@.