blob: ec91d632e0c95ec5283b43318d7db86db6ab07e6 [file] [log] [blame]
Note all these are mere examples which can be customized to your needs
AFCBQ
-----
AF PHB built using CBQ, DSMARK,GRED (default in GRIO mode) ,RED for BE
and the tcindex classifier with some algorithmic mapping
EFCBQ
-----
EF PHB built using CBQ (for rate control and prioritization),
DSMARK( to remark DSCPs), tcindex classifier and RED for the BE
traffic.
EFPRIO
------
EF PHB using the PRIO scheduler, Token Bucket to rate control EF,
tcindex classifier, DSMARK to remark, and RED for the BE traffic
EDGE scripts
==============
CB-3(1|2)-(u32/chains)
======================
The major differences are that the classifier is u32 on -u32 extension
and IPchains on the chains extension. CB stands for color Blind
and 31 is for the mode where only a CIR and CBS are defined whereas
32 stands for a mode where a CIR/CBS + PIR/EBS are defined.
Color Blind (CB)
==========-----=
We look at one special subnet that we are interested in for simplicty
reasons to demonstrate the capability. We send the packets from that
subnet to AF4*, BE or end up dropping depending on the metering results.
The algorithm overview is as follows:
*classify:
**case: subnet X
----------------
if !exceed meter1 tag as AF41
else
if !exceed meter2 tag as AF42
else
if !exceed meter 3 tag as AF43
else
drop
default case: Any other subnet
-------------------------------
if !exceed meter 5 tag as AF43
else
drop
One Egress side change the DSCPs of the packets to reflect AF4* and BE
based on the tags from the ingress.
-------------------------------------------------------------
Color Aware
===========
Define some meters with + policing and give them IDs eg
meter1=police index 1 rate $CIR1 burst $CBS1
meter2=police index 2 rate $CIR2 burst $CBS2 etc
General overview:
classify based on the DSCPs and use the policer ids to decide tagging
*classify on ingress:
switch (dscp) {
case AF41: /* tos&0xfc == 0x88 */
if (!exceed meter1) break;
case AF42: /* tos&0xfc == 0x90 */
if (!exceed meter2) {
tag as AF42;
break;
}
case AF43: /* tos&0xfc == 0x98 */
if (!exceed meter3) {
tag as AF43;
break;
} else
drop;
default:
if (!exceed meter4) tag as BE;
else drop;
}
On the Egress side mark the proper AF tags