blob: 804fad196e652d7a4805d09f8247892c5b40242e [file] [log] [blame]
#! /bin/sh -x
#
# sample script on using the ingress capabilities
# This script fwmark tags(IPchains) based on metering on the ingress
# interface the result is used for fast classification and re-marking
# on the egress interface
# This is an example of a color blind mode marker with no PIR configured
# based on draft-wahjak-mcm-00.txt (section 3.1)
#
#path to various utilities;
#change to reflect yours.
#
IPROUTE=/root/DS-6-beta/iproute2-990530-dsing
TC=$IPROUTE/tc/tc
IP=$IPROUTE/ip/ip
IPCHAINS=/root/DS-6-beta/ipchains-1.3.9/ipchains
INDEV=eth2
EGDEV="dev eth1"
CIR1=1500kbit
CIR2=500kbit
#The CBS is about 60 MTU sized packets
CBS1=90k
CBS2=90k
meter1="police rate $CIR1 burst $CBS1 "
meter1a="police rate $CIR2 burst $CBS1 "
meter2="police rate $CIR1 burst $CBS2 "
meter2a="police rate $CIR2 burst $CBS2 "
meter3="police rate $CIR2 burst $CBS1 "
meter3a="police rate $CIR2 burst $CBS1 "
meter4="police rate $CIR2 burst $CBS2 "
meter5="police rate $CIR1 burst $CBS2 "
#
# tag the rest of incoming packets from subnet 10.2.0.0/24 to fw value 1
# tag all incoming packets from any other subnet to fw tag 2
############################################################
$IPCHAINS -A input -i $INDEV -s 0/0 -m 2
$IPCHAINS -A input -i $INDEV -s 10.2.0.0/24 -m 1
#
############################################################
# install the ingress qdisc on the ingress interface
$TC qdisc add dev $INDEV handle ffff: ingress
#
############################################################
# All packets are marked with a tcindex value which is used on the egress
# tcindex 1 maps to AF41, 2->AF42, 3->AF43, 4->BE
#
############################################################
#
# anything with fw tag of 1 is passed on with a tcindex value 1
#if it doesnt exceed its allocated rate (CIR/CBS)
#
$TC filter add dev $INDEV parent ffff: protocol ip prio 1 handle 1 fw \
$meter1 \
continue flowid 4:1
$TC filter add dev $INDEV parent ffff: protocol ip prio 2 handle 1 fw \
$meter1a \
continue flowid 4:1
#
# if it exceeds the above but not the extra rate/burst below, it gets a
#tcindex value of 2
#
$TC filter add dev $INDEV parent ffff: protocol ip prio 3 handle 1 fw \
$meter2 \
continue flowid 4:2
$TC filter add dev $INDEV parent ffff: protocol ip prio 4 handle 1 fw \
$meter2a \
continue flowid 4:2
#
# if it exceeds the above but not the rule below, it gets a tcindex value
# of 3
#
$TC filter add dev $INDEV parent ffff: protocol ip prio 5 handle 1 fw \
$meter3 \
continue flowid 4:3
$TC filter add dev $INDEV parent ffff: protocol ip prio 6 handle 1 fw \
$meter3a \
drop flowid 4:3
#
# Anything else (not from the subnet 10.2.0.24/24) gets discarded if it
# exceeds 1Mbps and by default goes to BE if it doesnt
#
$TC filter add dev $INDEV parent ffff: protocol ip prio 7 handle 2 fw \
$meter5 \
drop flowid 4:4
######################## Egress side ########################
# attach a dsmarker
#
$TC qdisc add $EGDEV handle 1:0 root dsmark indices 64
#
# values of the DSCP to change depending on the class
#note that the ECN bits are masked out
#
#AF41 (0x88 is 0x22 shifted to the right by two bits)
#
$TC class change $EGDEV classid 1:1 dsmark mask 0x3 \
value 0x88
#AF42
$TC class change $EGDEV classid 1:2 dsmark mask 0x3 \
value 0x90
#AF43
$TC class change $EGDEV classid 1:3 dsmark mask 0x3 \
value 0x98
#BE
$TC class change $EGDEV classid 1:4 dsmark mask 0x3 \
value 0x0
#
#
# The class mapping (using tcindex; could easily have
# replaced it with the fw classifier instead)
#
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
handle 1 tcindex classid 1:1
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
handle 2 tcindex classid 1:2
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
handle 3 tcindex classid 1:3
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
handle 4 tcindex classid 1:4
#
#
echo "---- qdisc parameters Ingress ----------"
$TC qdisc ls dev $INDEV
echo "---- Class parameters Ingress ----------"
$TC class ls dev $INDEV
echo "---- filter parameters Ingress ----------"
$TC filter ls dev $INDEV parent ffff:
echo "---- qdisc parameters Egress ----------"
$TC qdisc ls $EGDEV
echo "---- Class parameters Egress ----------"
$TC class ls $EGDEV
echo "---- filter parameters Egress ----------"
$TC filter ls $EGDEV parent 1:0
#
#deleting the ingress qdisc
#$TC qdisc del $INDEV ingress