vxlan: Allow setting destination to unicast address.
This patch allows setting VXLAN destination to unicast address.
It allows that VXLAN can be used as peer-to-peer tunnel without
multicast.
v6: change back to the v3 except for using new attribute because
replacing command-line parameters breaks existing scripts,
based by Cong Wang's comments.
v5: rebase on the latest.
v4: replace "group" with "remote" based by David Stevens's comments.
v3: move a new attribute REMOTE into the last of an enum list
based by Stephen Hemminger's comments.
fix the usage to show explicitly that both "remote" and "group"
cannot be specified, based by Ben Hutchings's comments.
v2: use a new argument "remote" instead of "group" based by
Stephen Hemminger's comments.
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
diff --git a/ip/iplink_vxlan.c b/ip/iplink_vxlan.c
index 1025326..4304b0d 100644
--- a/ip/iplink_vxlan.c
+++ b/ip/iplink_vxlan.c
@@ -23,7 +23,7 @@
static void explain(void)
{
- fprintf(stderr, "Usage: ... vxlan id VNI [ group ADDR ] [ local ADDR ]\n");
+ fprintf(stderr, "Usage: ... vxlan id VNI [ { group | remote } ADDR ] [ local ADDR ]\n");
fprintf(stderr, " [ ttl TTL ] [ tos TOS ] [ dev PHYS_DEV ]\n");
fprintf(stderr, " [ port MIN MAX ] [ [no]learning ]\n");
fprintf(stderr, " [ [no]proxy ] [ [no]rsc ]\n");
@@ -42,6 +42,7 @@
int vni_set = 0;
__u32 saddr = 0;
__u32 gaddr = 0;
+ __u32 daddr = 0;
unsigned link = 0;
__u8 tos = 0;
__u8 ttl = 0;
@@ -68,7 +69,13 @@
gaddr = get_addr32(*argv);
if (!IN_MULTICAST(ntohl(gaddr)))
- invarg("invald group address", *argv);
+ invarg("invalid group address", *argv);
+ } else if (!matches(*argv, "remote")) {
+ NEXT_ARG();
+ daddr = get_addr32(*argv);
+
+ if (IN_MULTICAST(ntohl(daddr)))
+ invarg("invalid remote address", *argv);
} else if (!matches(*argv, "local")) {
NEXT_ARG();
if (strcmp(*argv, "any"))
@@ -160,9 +167,15 @@
fprintf(stderr, "vxlan: missing virtual network identifier\n");
return -1;
}
+ if (gaddr && daddr) {
+ fprintf(stderr, "vxlan: both group and remote cannot be specified\n");
+ return -1;
+ }
addattr32(n, 1024, IFLA_VXLAN_ID, vni);
if (gaddr)
addattr_l(n, 1024, IFLA_VXLAN_GROUP, &gaddr, 4);
+ else if (daddr)
+ addattr_l(n, 1024, IFLA_VXLAN_GROUP, &daddr, 4);
if (saddr)
addattr_l(n, 1024, IFLA_VXLAN_LOCAL, &saddr, 4);
if (link)
@@ -208,9 +221,14 @@
if (tb[IFLA_VXLAN_GROUP]) {
__be32 addr = rta_getattr_u32(tb[IFLA_VXLAN_GROUP]);
- if (addr)
- fprintf(f, "group %s ",
- format_host(AF_INET, 4, &addr, s1, sizeof(s1)));
+ if (addr) {
+ if (IN_MULTICAST(ntohl(addr)))
+ fprintf(f, "group %s ",
+ format_host(AF_INET, 4, &addr, s1, sizeof(s1)));
+ else
+ fprintf(f, "remote %s ",
+ format_host(AF_INET, 4, &addr, s1, sizeof(s1)));
+ }
}
if (tb[IFLA_VXLAN_LOCAL]) {
diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
index 86e0bc9..76f92dd 100644
--- a/man/man8/ip-link.8.in
+++ b/man/man8/ip-link.8.in
@@ -206,8 +206,8 @@
.BI type " vxlan " id " ID
.R " [ "
.BI dev " PHYS_DEV "
-.R " ] [ "
-.BI group " IPADDR "
+.RB " ] [ { " group " | " remote " } "
+.I IPADDR
.R " ] [ "
.BI local " IPADDR "
.R " ] [ "
@@ -240,6 +240,17 @@
.sp
.BI group " IPADDR"
- specifies the multicast IP address to join.
+This parameter cannot be specified with the
+.B remote
+parameter.
+
+.sp
+.BI remote " IPADDR"
+- specifies the unicast destination IP address to use in outgoing packets
+when the destination link layer address is not known in the VXLAN device
+forwarding database. This parameter cannot be specified with the
+.B group
+parameter.
.sp
.BI local " IPADDR"
