blob: 27f62616cce8f287e15feddd783a370dd174129f [file] [log] [blame]
# XZ Utils French Translation
# This file is put in the public domain.
# Adrien Nader <adrien@notk.org>, 2011-2014.
# Stéphane Aulery <lkppo@free.fr>, 2019.
#
msgid ""
msgstr ""
"Project-Id-Version: xz-5.2.4\n"
"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
"POT-Creation-Date: 2018-04-29 18:19+0300\n"
"PO-Revision-Date: 2019-05-12 05:46+0200\n"
"Last-Translator: Stéphane Aulery <lkppo@free.fr>\n"
"Language-Team: French <traduc@traduc.org>\n"
"Language: fr\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
#: src/xz/args.c:63
#, c-format
msgid "%s: Invalid argument to --block-list"
msgstr "%s : argument de l'option --block-list invalide"
#: src/xz/args.c:73
#, c-format
msgid "%s: Too many arguments to --block-list"
msgstr "%s : trop d'arguments pour l'option --block-list"
#: src/xz/args.c:102
msgid "0 can only be used as the last element in --block-list"
msgstr "0 peut seulement être utilisé en dernier élément de --block-list"
#: src/xz/args.c:406
#, c-format
msgid "%s: Unknown file format type"
msgstr "%s : Format de fichier inconnu"
#: src/xz/args.c:429 src/xz/args.c:437
#, c-format
msgid "%s: Unsupported integrity check type"
msgstr "%s : Type de vérification d'intégrité inconnu"
#: src/xz/args.c:473
msgid "Only one file can be specified with `--files' or `--files0'."
msgstr "Un seul fichier peut être spécifié avec `--files' ou `--files0'."
#: src/xz/args.c:541
#, c-format
msgid "The environment variable %s contains too many arguments"
msgstr "La variable d'environnement %s contient trop d'arguments"
#: src/xz/args.c:643
msgid "Compression support was disabled at build time"
msgstr "Le support de la compression à était désactivé lors de la compilaton"
#: src/xz/args.c:650
msgid "Decompression support was disabled at build time"
msgstr "Le support de la décompression a été désactivé lors de la compilation"
#: src/xz/coder.c:110
msgid "Maximum number of filters is four"
msgstr "Le nombre maximal de filtres est quatre"
#: src/xz/coder.c:129
msgid "Memory usage limit is too low for the given filter setup."
msgstr "La limite d'utilisation mémoire est trop basse pour la configuration de filtres donnée."
#: src/xz/coder.c:159
msgid "Using a preset in raw mode is discouraged."
msgstr "Utiliser un préréglage en mode `raw' est déconseillé."
#: src/xz/coder.c:161
msgid "The exact options of the presets may vary between software versions."
msgstr "Le détail des préréglages peut varier entre différentes versions du logiciel."
#: src/xz/coder.c:184
msgid "The .lzma format supports only the LZMA1 filter"
msgstr "Le format .lzma ne prend en charge que le filtre LZMA1"
#: src/xz/coder.c:192
msgid "LZMA1 cannot be used with the .xz format"
msgstr "Le filtre LZMA1 ne peut être utilisé avec le format .xz"
#: src/xz/coder.c:209
msgid "The filter chain is incompatible with --flush-timeout"
msgstr "La Chaine de filtre est incompatible avec --flush-timeout"
#: src/xz/coder.c:215
msgid "Switching to single-threaded mode due to --flush-timeout"
msgstr "Bascule en mode mono-processus à cause de --flush-timeout"
#: src/xz/coder.c:235
#, c-format
msgid "Using up to %<PRIu32> threads."
msgstr "Jusqu'à %<PRIu32> threads seront utilisés."
#: src/xz/coder.c:251
msgid "Unsupported filter chain or filter options"
msgstr "Enchaînement ou options de filtres non pris en charge"
#: src/xz/coder.c:263
#, c-format
msgid "Decompression will need %s MiB of memory."
msgstr "La décompression nécessitera %s MiB de mémoire."
#: src/xz/coder.c:300
#, c-format
msgid "Adjusted the number of threads from %s to %s to not exceed the memory usage limit of %s MiB"
msgstr "Nombre de threads réduit de %s à %s pour ne pas dépasser la limite d'utilisation mémoire de %s MiB"
#: src/xz/coder.c:354
#, c-format
msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
msgstr "Taille du dictionnaire LZMA%c réduite de %s MiB à %s MiB pour ne pas dépasser la limite d'utilisation mémoire de %s MiB"
#: src/xz/file_io.c:110 src/xz/file_io.c:118
#, c-format
msgid "Error creating a pipe: %s"
msgstr "Impossible de créer un tube anonyme (pipe) : %s"
#: src/xz/file_io.c:173
msgid "Sandbox is disabled due to incompatible command line arguments"
msgstr "La sandbox est désactivée car elle est incompatible avec les arguments passés"
#: src/xz/file_io.c:216
msgid "Sandbox was successfully enabled"
msgstr "La sandboxe a été activée avec succès"
#: src/xz/file_io.c:220
msgid "Failed to enable the sandbox"
msgstr "Echec de l'activation de la sandboxe"
#: src/xz/file_io.c:262
#, c-format
msgid "%s: poll() failed: %s"
msgstr "%s : L'appel à la fonction poll() a échoué : %s"
#. TRANSLATORS: When compression or decompression finishes,
#. and xz is going to remove the source file, xz first checks
#. if the source file still exists, and if it does, does its
#. device and inode numbers match what xz saw when it opened
#. the source file. If these checks fail, this message is
#. shown, %s being the filename, and the file is not deleted.
#. The check for device and inode numbers is there, because
#. it is possible that the user has put a new file in place
#. of the original file, and in that case it obviously
#. shouldn't be removed.
#: src/xz/file_io.c:332
#, c-format
msgid "%s: File seems to have been moved, not removing"
msgstr "%s : Le fichier a apparemment été déplacé, suppression annulée"
#: src/xz/file_io.c:339 src/xz/file_io.c:878
#, c-format
msgid "%s: Cannot remove: %s"
msgstr "%s : Impossible de supprimer : %s"
#: src/xz/file_io.c:364
#, c-format
msgid "%s: Cannot set the file owner: %s"
msgstr "%s : Impossible de modifier le propriétaire du fichier : %s"
#: src/xz/file_io.c:370
#, c-format
msgid "%s: Cannot set the file group: %s"
msgstr "%s : Impossible de modifier le groupe propriétaire du fichier : %s"
#: src/xz/file_io.c:389
#, c-format
msgid "%s: Cannot set the file permissions: %s"
msgstr "%s : Impossible de modifier les permissions du fichier : %s"
# Note from translator on "file status flags".
# The following entry is kept un-translated on purpose. It is difficult to
# translate and should only happen in exceptional circumstances which means
# that translating would:
# - lose some of the meaning
# - make it more difficult to look up in search engines; it might happen one in
# a million times, if we dilute the error message in 20 languages, it will be
# almost impossible to find an explanation and support for the error.
#: src/xz/file_io.c:515
#, c-format
msgid "Error getting the file status flags from standard input: %s"
msgstr "Echec de la lecture du drapeau d'état du fichier depuis la sortie standard : %s"
#: src/xz/file_io.c:572 src/xz/file_io.c:634
#, c-format
msgid "%s: Is a symbolic link, skipping"
msgstr "%s est un lien symbolique : ignoré"
#: src/xz/file_io.c:663
#, c-format
msgid "%s: Is a directory, skipping"
msgstr "%s est un répertoire : ignoré"
#: src/xz/file_io.c:669
#, c-format
msgid "%s: Not a regular file, skipping"
msgstr "%s n'est pas un fichier régulier : ignoré"
#: src/xz/file_io.c:686
#, c-format
msgid "%s: File has setuid or setgid bit set, skipping"
msgstr "%s : Le fichier possède les bits `setuid' ou `setgid' : ignoré"
#: src/xz/file_io.c:693
#, c-format
msgid "%s: File has sticky bit set, skipping"
msgstr "%s : Le fichier possède le bit `sticky' : ignoré"
#: src/xz/file_io.c:700
#, c-format
msgid "%s: Input file has more than one hard link, skipping"
msgstr "%s : Le fichier d'entrée a plus d'un lien matériel : ignoré"
# See note from translator above titled "file status flags".
#: src/xz/file_io.c:788
#, c-format
msgid "Error restoring the status flags to standard input: %s"
msgstr "Erreur de restauration du drapeau d'état de l'entrée standard : %s"
# See note from translator above titled "file status flags".
#: src/xz/file_io.c:836
#, c-format
msgid "Error getting the file status flags from standard output: %s"
msgstr "Erreur de lecture du drapeau d'état du fichier depuis la sortie standard : %s"
#: src/xz/file_io.c:1014
#, c-format
msgid "Error restoring the O_APPEND flag to standard output: %s"
msgstr "Impossible de rétablir le drapeau O_APPEND sur la sortie standard : %s"
#: src/xz/file_io.c:1026
#, c-format
msgid "%s: Closing the file failed: %s"
msgstr "%s : Impossible de fermer le fichier : %s"
#: src/xz/file_io.c:1062 src/xz/file_io.c:1288
#, c-format
msgid "%s: Seeking failed when trying to create a sparse file: %s"
msgstr "%s : Impossible de se déplacer dans le fichier pour créer un 'sparse file' : %s"
#: src/xz/file_io.c:1157
#, c-format
msgid "%s: Read error: %s"
msgstr "%s : Erreur d'écriture : %s"
#: src/xz/file_io.c:1177
#, c-format
msgid "%s: Error seeking the file: %s"
msgstr "%s : Impossible de se déplacer dans le fichier : %s"
#: src/xz/file_io.c:1187
#, c-format
msgid "%s: Unexpected end of file"
msgstr "%s : Fin de fichier inattendue"
#: src/xz/file_io.c:1246
#, c-format
msgid "%s: Write error: %s"
msgstr "%s : Erreur d'écriture : %s"
#: src/xz/hardware.c:107
msgid "Disabled"
msgstr "Désactivé"
#. TRANSLATORS: Test with "xz --info-memory" to see if
#. the alignment looks nice.
#: src/xz/hardware.c:126
msgid "Total amount of physical memory (RAM): "
msgstr "Quantité totale de mémoire physique (RAM) : "
#: src/xz/hardware.c:128
msgid "Memory usage limit for compression: "
msgstr "Limite d'utilisation pour la compression : "
#: src/xz/hardware.c:130
msgid "Memory usage limit for decompression: "
msgstr "Limite d'utilisation pour la décompression : "
#. TRANSLATORS: Indicates that there is no integrity check.
#. This string is used in tables, so the width must not
#. exceed ten columns with a fixed-width font.
#: src/xz/list.c:65
msgid "None"
msgstr "Aucune"
#. TRANSLATORS: Indicates that integrity check name is not known,
#. but the Check ID is known (here 2). This and other "Unknown-N"
#. strings are used in tables, so the width must not exceed ten
#. columns with a fixed-width font. It's OK to omit the dash if
#. you need space for one extra letter, but don't use spaces.
#: src/xz/list.c:72
msgid "Unknown-2"
msgstr "Inconnue-2"
#: src/xz/list.c:73
msgid "Unknown-3"
msgstr "Inconnue-3"
#: src/xz/list.c:75
msgid "Unknown-5"
msgstr "Inconnue-5"
#: src/xz/list.c:76
msgid "Unknown-6"
msgstr "Inconnue-6"
#: src/xz/list.c:77
msgid "Unknown-7"
msgstr "Inconnue-7"
#: src/xz/list.c:78
msgid "Unknown-8"
msgstr "Inconnue-8"
#: src/xz/list.c:79
msgid "Unknown-9"
msgstr "Inconnue-9"
#: src/xz/list.c:81
msgid "Unknown-11"
msgstr "Inconnue-11"
#: src/xz/list.c:82
msgid "Unknown-12"
msgstr "Inconnue-12"
#: src/xz/list.c:83
msgid "Unknown-13"
msgstr "Inconnue-13"
#: src/xz/list.c:84
msgid "Unknown-14"
msgstr "Inconnue-14"
#: src/xz/list.c:85
msgid "Unknown-15"
msgstr "Inconnue-15"
#: src/xz/list.c:153
#, c-format
msgid "%s: File is empty"
msgstr "%s : Le fichier est vide"
#: src/xz/list.c:158
#, c-format
msgid "%s: Too small to be a valid .xz file"
msgstr "%s : Trop petit pour être un fichier xz valide."
#. TRANSLATORS: These are column headings. From Strms (Streams)
#. to Ratio, the columns are right aligned. Check and Filename
#. are left aligned. If you need longer words, it's OK to
#. use two lines here. Test with "xz -l foo.xz".
#: src/xz/list.c:677
msgid "Strms Blocks Compressed Uncompressed Ratio Check Filename"
msgstr "Flux Blocs Compressé Décompressé Ratio Vérif. Nom de fichier"
#: src/xz/list.c:717
#, c-format
msgid " Streams: %s\n"
msgstr " Flux : %s\n"
#: src/xz/list.c:719
#, c-format
msgid " Blocks: %s\n"
msgstr " Blocs : %s\n"
#: src/xz/list.c:721
#, c-format
msgid " Compressed size: %s\n"
msgstr " Taille données avec compression : %s\n"
#: src/xz/list.c:724
#, c-format
msgid " Uncompressed size: %s\n"
msgstr " Taille données sans compression : %s\n"
#: src/xz/list.c:727
#, c-format
msgid " Ratio: %s\n"
msgstr " Ratio : %s\n"
#: src/xz/list.c:729
#, c-format
msgid " Check: %s\n"
msgstr " Vérification : %s\n"
#: src/xz/list.c:730
#, c-format
msgid " Stream padding: %s\n"
msgstr " Octets de rembourrage du flux : %s\n"
#. TRANSLATORS: The second line is column headings. All except
#. Check are right aligned; Check is left aligned. Test with
#. "xz -lv foo.xz".
#: src/xz/list.c:758
msgid ""
" Streams:\n"
" Stream Blocks CompOffset UncompOffset CompSize UncompSize Ratio Check Padding"
msgstr ""
" Flux :\n"
" Flux Blocs PositionComp PositionDécomp TailleComp TailleDécomp Ratio Vérif. Bourrage"
#. TRANSLATORS: The second line is column headings. All
#. except Check are right aligned; Check is left aligned.
#: src/xz/list.c:813
#, c-format
msgid ""
" Blocks:\n"
" Stream Block CompOffset UncompOffset TotalSize UncompSize Ratio Check"
msgstr ""
" Blocs :\n"
" Flux Bloc PositionComp PositionDécomp TailleTot TailleDécomp Ratio Vérif."
#. TRANSLATORS: These are additional column headings
#. for the most verbose listing mode. CheckVal
#. (Check value), Flags, and Filters are left aligned.
#. Header (Block Header Size), CompSize, and MemUsage
#. are right aligned. %*s is replaced with 0-120
#. spaces to make the CheckVal column wide enough.
#. Test with "xz -lvv foo.xz".
#: src/xz/list.c:825
#, c-format
msgid " CheckVal %*s Header Flags CompSize MemUsage Filters"
msgstr " ValVérif %*sEn-tête Drapeaux TailleComp UtilMém Filtres"
#: src/xz/list.c:903 src/xz/list.c:1078
#, c-format
msgid " Memory needed: %s MiB\n"
msgstr " Mémoire nécessaire : %s MiB\n"
#: src/xz/list.c:905 src/xz/list.c:1080
#, c-format
msgid " Sizes in headers: %s\n"
msgstr " Tailles stockées dans l'en-tête : %s\n"
#: src/xz/list.c:906 src/xz/list.c:1081
msgid "Yes"
msgstr "Oui"
#: src/xz/list.c:906 src/xz/list.c:1081
msgid "No"
msgstr "Non"
#: src/xz/list.c:907 src/xz/list.c:1082
#, c-format
msgid " Minimum XZ Utils version: %s\n"
msgstr " Version minimale de XZ Utils : %s\n"
#. TRANSLATORS: %s is an integer. Only the plural form of this
#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
#: src/xz/list.c:1057
#, c-format
msgid "%s file\n"
msgid_plural "%s files\n"
msgstr[0] "%s fichier\n"
msgstr[1] "%s fichiers\n"
#: src/xz/list.c:1070
msgid "Totals:"
msgstr "Totaux :"
#: src/xz/list.c:1071
#, c-format
msgid " Number of files: %s\n"
msgstr " Nombre de fichiers : %s\n"
#: src/xz/list.c:1146
msgid "--list works only on .xz files (--format=xz or --format=auto)"
msgstr "--list ne marche que sur les fichiers .xz (--format=xz ou --format=auto)"
#: src/xz/list.c:1152
msgid "--list does not support reading from standard input"
msgstr "--list est incompatible avec la lecture sur l'entrée standard"
#: src/xz/main.c:89
#, c-format
msgid "%s: Error reading filenames: %s"
msgstr "%s : Erreur lors de la lecture des noms de fichiers : %s"
#: src/xz/main.c:96
#, c-format
msgid "%s: Unexpected end of input when reading filenames"
msgstr "%s : Fin des données inattendue lors de la lecture des noms de fichiers"
#: src/xz/main.c:120
#, c-format
msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?"
msgstr "%s : Caractère NULL détecté lors de la lecture des noms de fichiers ; peut-être pensiez-vous à `--files0' plutot qu'a `--files' ?"
#: src/xz/main.c:174
msgid "Compression and decompression with --robot are not supported yet."
msgstr "La compression et la décompression ne marchent pas encore avec --robot."
#: src/xz/main.c:252
msgid "Cannot read data from standard input when reading filenames from standard input"
msgstr "Impossible de lire à la fois les données et les noms de fichiers depuis l'entrée standard"
#. TRANSLATORS: This is the program name in the beginning
#. of the line in messages. Usually it becomes "xz: ".
#. This is a translatable string because French needs
#. a space before a colon.
#: src/xz/message.c:714
#, c-format
msgid "%s: "
msgstr "%s : "
#: src/xz/message.c:777 src/xz/message.c:827
msgid "Internal error (bug)"
msgstr "Erreur interne (bug)"
#: src/xz/message.c:784
msgid "Cannot establish signal handlers"
msgstr "Impossible d'installer le gestionnaire de signaux"
#: src/xz/message.c:793
msgid "No integrity check; not verifying file integrity"
msgstr "Pas de données de vérification d'intégrité ; vérification non effectuée"
#: src/xz/message.c:796
msgid "Unsupported type of integrity check; not verifying file integrity"
msgstr "Méthode de vérification d'intégrité non prise en charge ; vérification non effectuée"
#: src/xz/message.c:803
msgid "Memory usage limit reached"
msgstr "Limite d'utilisation mémoire atteinte"
#: src/xz/message.c:806
msgid "File format not recognized"
msgstr "Format de fichier inconnu"
#: src/xz/message.c:809
msgid "Unsupported options"
msgstr "Options non prises en charge"
#: src/xz/message.c:812
msgid "Compressed data is corrupt"
msgstr "Les données compressées sont corrompues"
#: src/xz/message.c:815
msgid "Unexpected end of input"
msgstr "Fin des données inattendue "
#: src/xz/message.c:848
#, c-format
msgid "%s MiB of memory is required. The limiter is disabled."
msgstr "%s MiB de mémoire sont nécessaires. La limite est désactivée."
#: src/xz/message.c:876
#, c-format
msgid "%s MiB of memory is required. The limit is %s."
msgstr "%s MiB de mémoire sont nécessaires, la limite étant %s."
#: src/xz/message.c:1043
#, c-format
msgid "%s: Filter chain: %s\n"
msgstr "%s : Enchaînement de filtres : %s\n"
#: src/xz/message.c:1053
#, c-format
msgid "Try `%s --help' for more information."
msgstr "Éxécutez `%s --help' pour obtenir davantage d'informations."
#: src/xz/message.c:1079
#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
"Compress or decompress FILEs in the .xz format.\n"
"\n"
msgstr ""
"Utilisation : %s [OPTION]... [FICHIER]...\n"
"Compresse ou decompresse FICHIER(s) au format .xz.\n"
"\n"
#: src/xz/message.c:1086
msgid "Mandatory arguments to long options are mandatory for short options too.\n"
msgstr ""
"Les arguments obligatoires pour les options longues le sont aussi pour les\n"
"options courtes.\n"
#: src/xz/message.c:1090
msgid " Operation mode:\n"
msgstr " Mode d'opération :\n"
#: src/xz/message.c:1093
msgid ""
" -z, --compress force compression\n"
" -d, --decompress force decompression\n"
" -t, --test test compressed file integrity\n"
" -l, --list list information about .xz files"
msgstr ""
" -z, --compress forcer le mode compression\n"
" -d, --decompress forcer le mode décompression\n"
" -t, --test tester l'intégrité du fichier compressé\n"
" -l, --list lister les informations sur les fichiers .xz"
#: src/xz/message.c:1099
msgid ""
"\n"
" Operation modifiers:\n"
msgstr ""
"\n"
" Modificateurs :\n"
#: src/xz/message.c:1102
msgid ""
" -k, --keep keep (don't delete) input files\n"
" -f, --force force overwrite of output file and (de)compress links\n"
" -c, --stdout write to standard output and don't delete input files"
msgstr ""
" -k, --keep ne pas supprimer les fichiers d'entrée\n"
" -f, --force forcer l'écrasement éventuel du fichier de sortie et\n"
" (dé)compresser les liens symboliques\n"
" -c, --stdout écrire sur la sortie standard et ne pas supprimer les\n"
" fichiers d'entrée"
#: src/xz/message.c:1108
msgid ""
" --single-stream decompress only the first stream, and silently\n"
" ignore possible remaining input data"
msgstr ""
" --single-stream décompresser uniquement le premier flux et ignorer\n"
" silencieusement les données éventuellement restantes"
#: src/xz/message.c:1111
msgid ""
" --no-sparse do not create sparse files when decompressing\n"
" -S, --suffix=.SUF use the suffix `.SUF' on compressed files\n"
" --files[=FILE] read filenames to process from FILE; if FILE is\n"
" omitted, filenames are read from the standard input;\n"
" filenames must be terminated with the newline character\n"
" --files0[=FILE] like --files but use the null character as terminator"
msgstr ""
" --no-sparse ne pas créer de 'sparse file' lors de la décompression\n"
" -S, --suffix=.SUF utiliser le suffixe `.SUF' pour les fichiers compressés\n"
" --files[=FILE] lire les fichiers sur lesquels opérer depuis FILE ; si\n"
" FILE est omis, ceux-ci sont lus depuis l'entrée standard\n"
" et doivent être suivis d'un caractère retour à la ligne\n"
" --files0[=FILE] comme --files mais avec un caractère null comme séparateur"
#: src/xz/message.c:1120
msgid ""
"\n"
" Basic file format and compression options:\n"
msgstr ""
"\n"
" Options basiques de format de fichier et de compression :\n"
#: src/xz/message.c:1122
msgid ""
" -F, --format=FMT file format to encode or decode; possible values are\n"
" `auto' (default), `xz', `lzma', and `raw'\n"
" -C, --check=CHECK integrity check type: `none' (use with caution),\n"
" `crc32', `crc64' (default), or `sha256'"
msgstr ""
" -F, --format=FMT format du fichier à encoder ou décoder ; sont acceptés :\n"
" `auto' (par défaut), `xz', `lzma' et `raw'\n"
" -C, --check=CHECK type de vérification d'intégrité : `none' (à utiliser avec\n"
" précaution), `crc32', `crc64' (par défaut) ou `sha256'"
#: src/xz/message.c:1127
msgid " --ignore-check don't verify the integrity check when decompressing"
msgstr ""
" --ignore-check ne pas vérifier l'intégrité des données lors de\n"
" la décompression"
#: src/xz/message.c:1131
msgid ""
" -0 ... -9 compression preset; default is 6; take compressor *and*\n"
" decompressor memory usage into account before using 7-9!"
msgstr ""
" -0 ... -9 préréglage de compression : 6 par défaut ; pensez à\n"
" l'utilisation mémoire du compresseur *et* du décompresseur\n"
" avant d'utiliser 7, 8 ou 9 !"
#: src/xz/message.c:1135
msgid ""
" -e, --extreme try to improve compression ratio by using more CPU time;\n"
" does not affect decompressor memory requirements"
msgstr ""
" -e, --extreme essayer d'améliorer la compression en utilisant davantage\n"
" de temps processeur ;\n"
" n'affecte pas les besoins mémoire du décompresseur"
#: src/xz/message.c:1139
msgid ""
" -T, --threads=NUM use at most NUM threads; the default is 1; set to 0\n"
" to use as many threads as there are processor cores"
msgstr ""
" -T, --threads=NB créer au plus NB fils de compression (1 par défault) ; la\n"
" valeur 0 est spéciale et équivaut au nombre de processeurs\n"
" de la machine"
#: src/xz/message.c:1144
msgid ""
" --block-size=SIZE\n"
" start a new .xz block after every SIZE bytes of input;\n"
" use this to set the block size for threaded compression"
msgstr ""
" --block-size=TAILLE\n"
" débuter un bloc XZ après chaque TAILLE octets de données\n"
" d'entrée ; ce réglage sert pour la compression paralléle"
#: src/xz/message.c:1148
msgid ""
" --block-list=SIZES\n"
" start a new .xz block after the given comma-separated\n"
" intervals of uncompressed data"
msgstr ""
" --block-list=TAILLES\n"
" débuter des blocs XZ après les TAILLES octets de données\n"
" spécifiées avec des virgules pour séparateur"
#: src/xz/message.c:1152
msgid ""
" --flush-timeout=TIMEOUT\n"
" when compressing, if more than TIMEOUT milliseconds has\n"
" passed since the previous flush and reading more input\n"
" would block, all pending data is flushed out"
msgstr ""
" --flush-timeout=TIMEOUT\n"
" pendant la compression, si plus de TIMEOUT ms ont passées\n"
" depuis le dernier flush et que la lecture est bloquée,\n"
" toutes les données en attente snt écrites"
#: src/xz/message.c:1158
#, no-c-format
msgid ""
" --memlimit-compress=LIMIT\n"
" --memlimit-decompress=LIMIT\n"
" -M, --memlimit=LIMIT\n"
" set memory usage limit for compression, decompression,\n"
" or both; LIMIT is in bytes, % of RAM, or 0 for defaults"
msgstr ""
" --memlimit-compress=LIMIT\n"
" --memlimit-decompress=LIMIT\n"
" -M, --memlimit=LIMIT\n"
" règle la limite d'utilisation mémoire pour la compression,\n"
" décompression ou les deux ; LIMIT est en octets,\n"
" pourcentage de RAM, ou 0 pour la valeur par défaut"
#: src/xz/message.c:1165
msgid ""
" --no-adjust if compression settings exceed the memory usage limit,\n"
" give an error instead of adjusting the settings downwards"
msgstr ""
" --no-adjust si les réglages de compression dépassent la limite\n"
" d'utilisation mémoire, renvoyer une erreur plutôt que de\n"
" diminuer les réglages"
#: src/xz/message.c:1171
msgid ""
"\n"
" Custom filter chain for compression (alternative for using presets):"
msgstr ""
"\n"
" Chaîne de filtres de compression personnalisée (en lieu des préréglages) :"
#: src/xz/message.c:1180
msgid ""
"\n"
" --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
" --lzma2[=OPTS] more of the following options (valid values; default):\n"
" preset=PRE reset options to a preset (0-9[e])\n"
" dict=NUM dictionary size (4KiB - 1536MiB; 8MiB)\n"
" lc=NUM number of literal context bits (0-4; 3)\n"
" lp=NUM number of literal position bits (0-4; 0)\n"
" pb=NUM number of position bits (0-4; 2)\n"
" mode=MODE compression mode (fast, normal; normal)\n"
" nice=NUM nice length of a match (2-273; 64)\n"
" mf=NAME match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n"
" depth=NUM maximum search depth; 0=automatic (default)"
msgstr ""
"\n"
" --lzma1[=OPTS] LZMA1/2 ; OPTS est une liste d'options parmi les suivantes\n"
" --lzma2[=OPTS] (entre parenthèses : valeurs valides et par défaut) :\n"
" preset=PRE remettre les options à un préréglage (0-9[e])\n"
" dict=NUM taille dictionnaire (4KiB - 1536MiB ; 8MiB)\n"
" lc=NUM nombre de 'literal context bits' (0-4 ; 3)\n"
" lp=NUM nombre de 'literal position bits' (0-4 ; 0)\n"
" pb=NUM nombre de 'position bits' (0-4 ; 2)\n"
" mode=MODE mode de compression (fast, normal ; normal)\n"
" nice=NUM nice length of a match (2-273; 64)\n"
" mf=NAME 'match finder' (hc3, hc4, bt2, bt3, bt4; bt4)\n"
" depth=NUM profondeur de recherche maximale ;\n"
" 0=automatique (par défaut)"
#: src/xz/message.c:1195
msgid ""
"\n"
" --x86[=OPTS] x86 BCJ filter (32-bit and 64-bit)\n"
" --powerpc[=OPTS] PowerPC BCJ filter (big endian only)\n"
" --ia64[=OPTS] IA-64 (Itanium) BCJ filter\n"
" --arm[=OPTS] ARM BCJ filter (little endian only)\n"
" --armthumb[=OPTS] ARM-Thumb BCJ filter (little endian only)\n"
" --sparc[=OPTS] SPARC BCJ filter\n"
" Valid OPTS for all BCJ filters:\n"
" start=NUM start offset for conversions (default=0)"
msgstr ""
"\n"
" --x86[=OPTS] filtre BCJ x86 (32-bit et 64-bit)\n"
" --powerpc[=OPTS] filtre BCJ PowerPC ('big endian' uniquement)\n"
" --ia64[=OPTS] filtre BCJ IA-64 (Itanium)\n"
" --arm[=OPTS] filtre BCJ ARM ('little endian' uniquement)\n"
" --armthumb[=OPTS] filtre BCJ ARM-Thumb ('little endian' uniquement)\n"
" --sparc[=OPTS] filtre BCJ SPARC\n"
" OPTS valides pour tous les filtres BCJ :\n"
" start=NUM position de début de la conversion (défaut=0)"
#: src/xz/message.c:1207
msgid ""
"\n"
" --delta[=OPTS] Delta filter; valid OPTS (valid values; default):\n"
" dist=NUM distance between bytes being subtracted\n"
" from each other (1-256; 1)"
msgstr ""
"\n"
" --delta[=OPTS] Filtre delta ; OPTS valides (vals. valides ; par défaut) :\n"
" dist=NUM distance entre les octets soustraits les\n"
" uns aux autres (1-256 ; 1)"
#: src/xz/message.c:1215
msgid ""
"\n"
" Other options:\n"
msgstr ""
"\n"
" Autres options :\n"
#: src/xz/message.c:1218
msgid ""
" -q, --quiet suppress warnings; specify twice to suppress errors too\n"
" -v, --verbose be verbose; specify twice for even more verbose"
msgstr ""
" -q, --quiet masquer les avertissements ; spécifier deux fois pour\n"
" aussi masquer les erreurs\n"
" -v, --verbose être bavard ; spécifier deux fois pour l'être davantage"
#: src/xz/message.c:1223
msgid " -Q, --no-warn make warnings not affect the exit status"
msgstr " -Q, --no-warn les avertissements ne modifient pas le code de sortie"
#: src/xz/message.c:1225
msgid " --robot use machine-parsable messages (useful for scripts)"
msgstr ""
" --robot utiliser des messages lisibles par un programme\n"
" (utile pour les scripts)"
#: src/xz/message.c:1228
msgid ""
" --info-memory display the total amount of RAM and the currently active\n"
" memory usage limits, and exit"
msgstr ""
" --info-memory afficher la quantité totale de RAM ainsi que la limite\n"
" actuelle d'utilisation mémoire puis quitter"
#: src/xz/message.c:1231
msgid ""
" -h, --help display the short help (lists only the basic options)\n"
" -H, --long-help display this long help and exit"
msgstr ""
" -h, --help afficher l'aide courte (ne liste que les options de base)\n"
" -H, --long-help afficher l'aide longue (ceci) puis quitter"
#: src/xz/message.c:1235
msgid ""
" -h, --help display this short help and exit\n"
" -H, --long-help display the long help (lists also the advanced options)"
msgstr ""
" -h, --help afficher l'aide courte (ceci) puis quitter\n"
" -H, --long-help afficher l'aide longue (liste aussi les options avancées)"
#: src/xz/message.c:1240
msgid " -V, --version display the version number and exit"
msgstr " -V, --version afficher le numéro de version puis quitter"
#: src/xz/message.c:1242
msgid ""
"\n"
"With no FILE, or when FILE is -, read standard input.\n"
msgstr ""
"\n"
"Sans FILE ou quand FILE est -, lire l'entrée standard.\n"
#. TRANSLATORS: This message indicates the bug reporting address
#. for this package. Please add _another line_ saying
#. "Report translation bugs to <...>\n" with the email or WWW
#. address for translation bugs. Thanks.
#: src/xz/message.c:1248
#, c-format
msgid "Report bugs to <%s> (in English or Finnish).\n"
msgstr ""
"Signaler les bogues à <%s> (en anglais ou en finnois).\n"
"Signaler les bogues de traduction à <lkppo@free.fr>.\n"
#: src/xz/message.c:1250
#, c-format
msgid "%s home page: <%s>\n"
msgstr "Page du projet %s : <%s>\n"
#: src/xz/message.c:1254
msgid "THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE."
msgstr "CECI EST UNE VERSION DE DEVELOPPEMENT QUI NE DOIT PAS ÊTRE UTILISEE EN PRODUCTION."
#: src/xz/options.c:86
#, c-format
msgid "%s: Options must be `name=value' pairs separated with commas"
msgstr "%s: Les options doivent être des paires `nom=valeur' séparées par des virgules"
#: src/xz/options.c:93
#, c-format
msgid "%s: Invalid option name"
msgstr "%s : Nom d'option invalide"
#: src/xz/options.c:113
#, c-format
msgid "%s: Invalid option value"
msgstr "%s : Valeur d'option invalide"
#: src/xz/options.c:247
#, c-format
msgid "Unsupported LZMA1/LZMA2 preset: %s"
msgstr "Préréglage LZMA1/LZMA2 non reconnu : %s"
#: src/xz/options.c:355
msgid "The sum of lc and lp must not exceed 4"
msgstr "La somme de lc et lp ne doit pas dépasser 4"
#: src/xz/options.c:359
#, c-format
msgid "The selected match finder requires at least nice=%<PRIu32>"
msgstr "Le `match finder' choisi nécessite au moins nice=%<PRIu32>"
#: src/xz/suffix.c:133 src/xz/suffix.c:258
#, c-format
msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
msgstr "%s : Avec --format=raw, --suffix=.SUF est nécessaire sauf lors de l'écriture vers stdout"
#: src/xz/suffix.c:164
#, c-format
msgid "%s: Filename has an unknown suffix, skipping"
msgstr "%s : Le fichier a un suffixe inconnu, ignoré"
#: src/xz/suffix.c:185
#, c-format
msgid "%s: File already has `%s' suffix, skipping"
msgstr "%s : Le fichier a déjà le suffixe '%s', ignoré"
#: src/xz/suffix.c:393
#, c-format
msgid "%s: Invalid filename suffix"
msgstr "%s: Suffixe de nom de fichier invalide"
#: src/xz/util.c:71
#, c-format
msgid "%s: Value is not a non-negative decimal integer"
msgstr "%s : La valeur n'est pas un entier décimal non négatif"
#: src/xz/util.c:113
#, c-format
msgid "%s: Invalid multiplier suffix"
msgstr "%s : Suffixe multiplicateur invalide"
#: src/xz/util.c:115
msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
msgstr "Les suffixes valides sont 'KiB' (2^10), 'MiB' (2^20) et 'GiB' (2^30)."
#: src/xz/util.c:132
#, c-format
msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
msgstr "La valeur de l'option '%s' doit être inclue entre %<PRIu64> et %<PRIu64>"
#: src/xz/util.c:257
msgid "Empty filename, skipping"
msgstr "Nom de fichier vide, ignoré"
#: src/xz/util.c:271
msgid "Compressed data cannot be read from a terminal"
msgstr "Les données compressées ne peuvent pas être lues depuis un terminal"
#: src/xz/util.c:284
msgid "Compressed data cannot be written to a terminal"
msgstr "Les données compressées ne peuvent pas être écrites dans un terminal"
#: src/common/tuklib_exit.c:39
msgid "Writing to standard output failed"
msgstr "Impossible d'écrire vers la sortie standard"
#: src/common/tuklib_exit.c:42
msgid "Unknown error"
msgstr "Erreur inconnue"
#~ msgid "Error setting O_NONBLOCK on standard input: %s"
#~ msgstr "Impossible d'établir le drapeau O_NONBLOCK sur la sortie standard : %s"
#~ msgid "Error setting O_NONBLOCK on standard output: %s"
#~ msgstr "Impossible d'activer le drapeau O_NONBLOCK sur la sortie standard : %s"