| #!/usr/bin/make -f |
| |
| build clean install binary-arch binary-indep binary: |
| +dh $@ --parallel $(opt_no_act) |
| |
| # Runs tests, too, if and only if nocheck is unset (see below). |
| build-arch:: build-plain build-static build-small |
| |
| build-indep: debian/normal-build/Makefile |
| cd debian/normal-build && doxygen Doxyfile |
| |
| autoreconf_sources := $(wildcard Makefile.am */Makefile.am */*/Makefile.am) |
| autoreconf_sources += configure.ac |
| |
| autoreconf_products := $(wildcard Makefile.in */Makefile.in */*/Makefile.in) |
| autoreconf_products += configure # and more, but these will do |
| |
| configure_input := $(autoreconf_products) |
| configure_input += Doxyfile.in |
| configure_input += src/liblzma/liblzma.pc.in |
| configure_input += $(wildcard src/scripts/*.in) |
| |
| override_dh_auto_clean: |
| rm -f debian/*-stamp |
| dh_auto_clean --builddirectory debian/xzdec-build |
| dh_auto_clean --builddirectory debian/normal-build |
| dh_auto_clean --builddirectory debian/static-build |
| sh debian/clean.sh |
| |
| override_dh_auto_install: |
| dh_auto_install --builddirectory debian/xzdec-build |
| dh_auto_install --builddirectory debian/normal-build |
| dh_auto_install --builddirectory debian/static-build |
| set -e; arch=$$(dpkg-architecture -qDEB_HOST_MULTIARCH); \ |
| install -d debian/tmp/lib/$$arch; \ |
| mv debian/tmp/usr/lib/$$arch/liblzma.so.* debian/tmp/lib/$$arch/; \ |
| dso=$$(basename $$(readlink debian/tmp/usr/lib/$$arch/liblzma.so)); \ |
| ln -s -f /lib/$$arch/$$dso debian/tmp/usr/lib/$$arch/liblzma.so |
| |
| override_dh_installchangelogs: |
| dh_installchangelogs ChangeLog |
| |
| build-plain: debian/normal-build/Makefile |
| dh_auto_build --builddirectory debian/normal-build |
| |
| build-static: debian/static-build/Makefile |
| dh_auto_build --builddirectory debian/static-build |
| |
| build-small: debian/xzdec-build/Makefile |
| dh_auto_build --builddirectory debian/xzdec-build |
| |
| debian/test-plain-stamp: | build-plain |
| dh_auto_test --builddirectory debian/normal-build |
| >$@ |
| |
| debian/test-static-stamp: | build-static |
| dh_auto_test --builddirectory debian/static-build |
| >$@ |
| |
| debian/test-xzdec-stamp: | build-small |
| $(MAKE) -C debian/xzdec-build/tests create_compress_files |
| $(MAKE) -C debian/xzdec-build/tests \ |
| TESTS="test_check test_files.sh test_compress.sh" \ |
| check-TESTS |
| >$@ |
| |
| debian/normal-build/Makefile debian/normal-build/Doxyfile: $(configure_input) |
| dh_auto_configure --builddirectory debian/normal-build -- \ |
| $(opt_reproduce) \ |
| --enable-threads --disable-static \ |
| $(opt_optimize) $(opt_quiet) \ |
| --disable-xzdec --disable-lzmadec |
| |
| debian/static-build/Makefile: $(configure_input) |
| dh_auto_configure --builddirectory debian/static-build -- \ |
| $(opt_reproduce) \ |
| --disable-threads --disable-shared \ |
| --enable-liblzma2-compat \ |
| $(opt_optimize) $(opt_quiet) \ |
| --disable-lzmainfo --disable-scripts \ |
| --disable-xzdec --disable-lzmadec \ |
| --disable-xz --disable-lzma-links |
| |
| debian/xzdec-build/Makefile: $(configure_input) |
| dh_auto_configure --builddirectory debian/xzdec-build -- \ |
| $(opt_reproduce) \ |
| --disable-shared --disable-nls --disable-encoders \ |
| --enable-small --disable-threads \ |
| --disable-liblzma2-compat \ |
| $(opt_optimize_small) $(opt_quiet) \ |
| --disable-lzmainfo --disable-scripts \ |
| --disable-xz --disable-lzma-links |
| |
| $(autoreconf_products): $(autoreconf_sources) |
| autoreconf -is |
| |
| small_flags_env = |
| small_flags_env += DEB_CFLAGS_MAINT_STRIP='-O2 -O3' |
| small_flags_env += DEB_CFLAGS_MAINT_PREPEND=-Os |
| flags_cmd = dpkg-buildflags --export=configure |
| opt_optimize = $(shell $(flags_cmd)) |
| opt_optimize_small = $(shell $(small_flags_env) $(flags_cmd)) |
| opt_reproduce = gl_cv_posix_shell=/bin/sh |
| |
| opt_no_act = |
| opt_quiet = |
| |
| # Unless noopt is set, use optimized CRC32 routine on the Hurd. |
| ifeq (hurd,$(shell dpkg-architecture -qDEB_HOST_ARCH_OS)) |
| cputype := $(shell dpkg-architecture -qDEB_HOST_ARCH_CPU) |
| ifeq (i386,$(cputype)) |
| opt_optimize += --enable-assembler=x86 |
| opt_optimize_small += --enable-assembler=x86 |
| endif |
| ifeq (amd64,$(cputype)) |
| opt_optimize += --enable-assembler=x86_64 |
| opt_optimize_small += --enable-assembler=x86_64 |
| endif |
| endif |
| |
| ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS))) |
| opt_optimize += --disable-assembler |
| opt_optimize_small += --disable-assembler |
| endif |
| |
| ifneq (,$(findstring n,$(MAKEFLAGS))) |
| opt_no_act = --no-act |
| endif |
| |
| ifneq (,$(filter quiet,$(DEB_BUILD_OPTIONS))) |
| opt_quiet = --quiet |
| MAKEFLAGS += --quiet |
| endif |
| |
| ifeq (,$(filter nocheck,$(DEB_BUILD_OPTIONS))) |
| build-arch:: debian/test-plain-stamp |
| build-arch:: debian/test-static-stamp |
| build-arch:: debian/test-xzdec-stamp |
| endif |
| |
| # Build a tarball with the latest upstream version. |
| # This is made complicated by the need to choose a nice version number. |
| REPO = http://git.tukaani.org/xz.git |
| BRANCH = master |
| get-orig-source: |
| mkdir debian-orig-source |
| -set -e; cd debian-orig-source; \ |
| : Fetch latest upstream version.; \ |
| git init -q; \ |
| git fetch -q --tags $(REPO); \ |
| git fetch -q $(REPO) $(BRANCH); \ |
| : Determine version number.; \ |
| commit_name=$$(git describe FETCH_HEAD); \ |
| release=$${commit_name%%-*}; \ |
| date=$$(date --utc --date="$$( \ |
| git log -1 --pretty=format:%cD "$$commit_name" \ |
| )" "+%Y%m%d"); \ |
| if test "$$commit_name" = "$$release"; \ |
| then upstream_version=$${commit_name#v}; \ |
| else upstream_version="$${release#v}+$${date}"; \ |
| fi; \ |
| : Generate tarball.; \ |
| echo "packaging $$commit_name"; \ |
| git archive --format=tar "$$commit_name" \ |
| --prefix="xz-utils-$$upstream_version/" | \ |
| gzip -n --rsyncable -9 \ |
| > "../xz-utils_$$upstream_version.orig.tar.gz" |
| rm -fr debian-orig-source |