| git-stash(1) |
| ============ |
| |
| NAME |
| ---- |
| git-stash - Stash the changes in a dirty working directory away |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'git stash' list [<options>] |
| 'git stash' show [<stash>] |
| 'git stash' drop [-q|--quiet] [<stash>] |
| 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] |
| 'git stash' branch <branchname> [<stash>] |
| 'git stash' [save [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet] |
| [-u|--include-untracked] [-a|--all] [<message>]] |
| 'git stash' clear |
| 'git stash' create [<message>] |
| 'git stash' store [-m|--message <message>] [-q|--quiet] <commit> |
| |
| DESCRIPTION |
| ----------- |
| |
| Use `git stash` when you want to record the current state of the |
| working directory and the index, but want to go back to a clean |
| working directory. The command saves your local modifications away |
| and reverts the working directory to match the `HEAD` commit. |
| |
| The modifications stashed away by this command can be listed with |
| `git stash list`, inspected with `git stash show`, and restored |
| (potentially on top of a different commit) with `git stash apply`. |
| Calling `git stash` without any arguments is equivalent to `git stash save`. |
| A stash is by default listed as "WIP on 'branchname' ...", but |
| you can give a more descriptive message on the command line when |
| you create one. |
| |
| The latest stash you created is stored in `refs/stash`; older |
| stashes are found in the reflog of this reference and can be named using |
| the usual reflog syntax (e.g. `stash@{0}` is the most recently |
| created stash, `stash@{1}` is the one before it, `stash@{2.hours.ago}` |
| is also possible). |
| |
| OPTIONS |
| ------- |
| |
| save [-p|--patch] [-k|--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q|--quiet] [<message>]:: |
| |
| Save your local modifications to a new 'stash', and run `git reset |
| --hard` to revert them. The <message> part is optional and gives |
| the description along with the stashed state. For quickly making |
| a snapshot, you can omit _both_ "save" and <message>, but giving |
| only <message> does not trigger this action to prevent a misspelled |
| subcommand from making an unwanted stash. |
| + |
| If the `--keep-index` option is used, all changes already added to the |
| index are left intact. |
| + |
| If the `--include-untracked` option is used, all untracked files are also |
| stashed and then cleaned up with `git clean`, leaving the working directory |
| in a very clean state. If the `--all` option is used instead then the |
| ignored files are stashed and cleaned in addition to the untracked files. |
| + |
| With `--patch`, you can interactively select hunks from the diff |
| between HEAD and the working tree to be stashed. The stash entry is |
| constructed such that its index state is the same as the index state |
| of your repository, and its worktree contains only the changes you |
| selected interactively. The selected changes are then rolled back |
| from your worktree. See the ``Interactive Mode'' section of |
| linkgit:git-add[1] to learn how to operate the `--patch` mode. |
| + |
| The `--patch` option implies `--keep-index`. You can use |
| `--no-keep-index` to override this. |
| |
| list [<options>]:: |
| |
| List the stashes that you currently have. Each 'stash' is listed |
| with its name (e.g. `stash@{0}` is the latest stash, `stash@{1}` is |
| the one before, etc.), the name of the branch that was current when the |
| stash was made, and a short description of the commit the stash was |
| based on. |
| + |
| ---------------------------------------------------------------- |
| stash@{0}: WIP on submit: 6ebd0e2... Update git-stash documentation |
| stash@{1}: On master: 9cc0589... Add git-stash |
| ---------------------------------------------------------------- |
| + |
| The command takes options applicable to the 'git log' |
| command to control what is shown and how. See linkgit:git-log[1]. |
| |
| show [<stash>]:: |
| |
| Show the changes recorded in the stash as a diff between the |
| stashed state and its original parent. When no `<stash>` is given, |
| shows the latest one. By default, the command shows the diffstat, but |
| it will accept any format known to 'git diff' (e.g., `git stash show |
| -p stash@{1}` to view the second most recent stash in patch form). |
| |
| pop [--index] [-q|--quiet] [<stash>]:: |
| |
| Remove a single stashed state from the stash list and apply it |
| on top of the current working tree state, i.e., do the inverse |
| operation of `git stash save`. The working directory must |
| match the index. |
| + |
| Applying the state can fail with conflicts; in this case, it is not |
| removed from the stash list. You need to resolve the conflicts by hand |
| and call `git stash drop` manually afterwards. |
| + |
| If the `--index` option is used, then tries to reinstate not only the working |
| tree's changes, but also the index's ones. However, this can fail, when you |
| have conflicts (which are stored in the index, where you therefore can no |
| longer apply the changes as they were originally). |
| + |
| When no `<stash>` is given, `stash@{0}` is assumed, otherwise `<stash>` must |
| be a reference of the form `stash@{<revision>}`. |
| |
| apply [--index] [-q|--quiet] [<stash>]:: |
| |
| Like `pop`, but do not remove the state from the stash list. Unlike `pop`, |
| `<stash>` may be any commit that looks like a commit created by |
| `stash save` or `stash create`. |
| |
| branch <branchname> [<stash>]:: |
| |
| Creates and checks out a new branch named `<branchname>` starting from |
| the commit at which the `<stash>` was originally created, applies the |
| changes recorded in `<stash>` to the new working tree and index. |
| If that succeeds, and `<stash>` is a reference of the form |
| `stash@{<revision>}`, it then drops the `<stash>`. When no `<stash>` |
| is given, applies the latest one. |
| + |
| This is useful if the branch on which you ran `git stash save` has |
| changed enough that `git stash apply` fails due to conflicts. Since |
| the stash is applied on top of the commit that was HEAD at the time |
| `git stash` was run, it restores the originally stashed state with |
| no conflicts. |
| |
| clear:: |
| Remove all the stashed states. Note that those states will then |
| be subject to pruning, and may be impossible to recover (see |
| 'Examples' below for a possible strategy). |
| |
| drop [-q|--quiet] [<stash>]:: |
| |
| Remove a single stashed state from the stash list. When no `<stash>` |
| is given, it removes the latest one. i.e. `stash@{0}`, otherwise |
| `<stash>` must be a valid stash log reference of the form |
| `stash@{<revision>}`. |
| |
| create:: |
| |
| Create a stash (which is a regular commit object) and return its |
| object name, without storing it anywhere in the ref namespace. |
| This is intended to be useful for scripts. It is probably not |
| the command you want to use; see "save" above. |
| |
| store:: |
| |
| Store a given stash created via 'git stash create' (which is a |
| dangling merge commit) in the stash ref, updating the stash |
| reflog. This is intended to be useful for scripts. It is |
| probably not the command you want to use; see "save" above. |
| |
| DISCUSSION |
| ---------- |
| |
| A stash is represented as a commit whose tree records the state of the |
| working directory, and its first parent is the commit at `HEAD` when |
| the stash was created. The tree of the second parent records the |
| state of the index when the stash is made, and it is made a child of |
| the `HEAD` commit. The ancestry graph looks like this: |
| |
| .----W |
| / / |
| -----H----I |
| |
| where `H` is the `HEAD` commit, `I` is a commit that records the state |
| of the index, and `W` is a commit that records the state of the working |
| tree. |
| |
| |
| EXAMPLES |
| -------- |
| |
| Pulling into a dirty tree:: |
| |
| When you are in the middle of something, you learn that there are |
| upstream changes that are possibly relevant to what you are |
| doing. When your local changes do not conflict with the changes in |
| the upstream, a simple `git pull` will let you move forward. |
| + |
| However, there are cases in which your local changes do conflict with |
| the upstream changes, and `git pull` refuses to overwrite your |
| changes. In such a case, you can stash your changes away, |
| perform a pull, and then unstash, like this: |
| + |
| ---------------------------------------------------------------- |
| $ git pull |
| ... |
| file foobar not up to date, cannot merge. |
| $ git stash |
| $ git pull |
| $ git stash pop |
| ---------------------------------------------------------------- |
| |
| Interrupted workflow:: |
| |
| When you are in the middle of something, your boss comes in and |
| demands that you fix something immediately. Traditionally, you would |
| make a commit to a temporary branch to store your changes away, and |
| return to your original branch to make the emergency fix, like this: |
| + |
| ---------------------------------------------------------------- |
| # ... hack hack hack ... |
| $ git checkout -b my_wip |
| $ git commit -a -m "WIP" |
| $ git checkout master |
| $ edit emergency fix |
| $ git commit -a -m "Fix in a hurry" |
| $ git checkout my_wip |
| $ git reset --soft HEAD^ |
| # ... continue hacking ... |
| ---------------------------------------------------------------- |
| + |
| You can use 'git stash' to simplify the above, like this: |
| + |
| ---------------------------------------------------------------- |
| # ... hack hack hack ... |
| $ git stash |
| $ edit emergency fix |
| $ git commit -a -m "Fix in a hurry" |
| $ git stash pop |
| # ... continue hacking ... |
| ---------------------------------------------------------------- |
| |
| Testing partial commits:: |
| |
| You can use `git stash save --keep-index` when you want to make two or |
| more commits out of the changes in the work tree, and you want to test |
| each change before committing: |
| + |
| ---------------------------------------------------------------- |
| # ... hack hack hack ... |
| $ git add --patch foo # add just first part to the index |
| $ git stash save --keep-index # save all other changes to the stash |
| $ edit/build/test first part |
| $ git commit -m 'First part' # commit fully tested change |
| $ git stash pop # prepare to work on all other changes |
| # ... repeat above five steps until one commit remains ... |
| $ edit/build/test remaining parts |
| $ git commit foo -m 'Remaining parts' |
| ---------------------------------------------------------------- |
| |
| Recovering stashes that were cleared/dropped erroneously:: |
| |
| If you mistakenly drop or clear stashes, they cannot be recovered |
| through the normal safety mechanisms. However, you can try the |
| following incantation to get a list of stashes that are still in your |
| repository, but not reachable any more: |
| + |
| ---------------------------------------------------------------- |
| git fsck --unreachable | |
| grep commit | cut -d\ -f3 | |
| xargs git log --merges --no-walk --grep=WIP |
| ---------------------------------------------------------------- |
| |
| |
| SEE ALSO |
| -------- |
| linkgit:git-checkout[1], |
| linkgit:git-commit[1], |
| linkgit:git-reflog[1], |
| linkgit:git-reset[1] |
| |
| GIT |
| --- |
| Part of the linkgit:git[1] suite |