| #!/bin/sh |
| # |
| # Copyright (c) 2008 Clemens Buchacher <drizzd@aon.at> |
| # |
| |
| test_description='test smart pushing over http via http-backend' |
| . ./test-lib.sh |
| |
| if test -n "$NO_CURL"; then |
| skip_all='skipping test, git built without http support' |
| test_done |
| fi |
| |
| ROOT_PATH="$PWD" |
| LIB_HTTPD_PORT=${LIB_HTTPD_PORT-'5541'} |
| . "$TEST_DIRECTORY"/lib-httpd.sh |
| . "$TEST_DIRECTORY"/lib-terminal.sh |
| start_httpd |
| |
| test_expect_success 'setup remote repository' ' |
| cd "$ROOT_PATH" && |
| mkdir test_repo && |
| cd test_repo && |
| git init && |
| : >path1 && |
| git add path1 && |
| test_tick && |
| git commit -m initial && |
| cd - && |
| git clone --bare test_repo test_repo.git && |
| cd test_repo.git && |
| git config http.receivepack true && |
| git config core.logallrefupdates true && |
| ORIG_HEAD=$(git rev-parse --verify HEAD) && |
| cd - && |
| mv test_repo.git "$HTTPD_DOCUMENT_ROOT_PATH" |
| ' |
| |
| cat >exp <<EOF |
| GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 |
| POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200 |
| EOF |
| test_expect_success 'no empty path components' ' |
| # In the URL, add a trailing slash, and see if git appends yet another |
| # slash. |
| cd "$ROOT_PATH" && |
| git clone $HTTPD_URL/smart/test_repo.git/ test_repo_clone && |
| |
| sed -e " |
| s/^.* \"// |
| s/\"// |
| s/ [1-9][0-9]*\$// |
| s/^GET /GET / |
| " >act <"$HTTPD_ROOT_PATH"/access.log && |
| |
| # Clear the log, so that it does not affect the "used receive-pack |
| # service" test which reads the log too. |
| # |
| # We do this before the actual comparison to ensure the log is cleared. |
| echo > "$HTTPD_ROOT_PATH"/access.log && |
| |
| test_cmp exp act |
| ' |
| |
| test_expect_success 'clone remote repository' ' |
| rm -rf test_repo_clone && |
| git clone $HTTPD_URL/smart/test_repo.git test_repo_clone |
| ' |
| |
| test_expect_success 'push to remote repository (standard)' ' |
| cd "$ROOT_PATH"/test_repo_clone && |
| : >path2 && |
| git add path2 && |
| test_tick && |
| git commit -m path2 && |
| HEAD=$(git rev-parse --verify HEAD) && |
| GIT_CURL_VERBOSE=1 git push -v -v 2>err && |
| ! grep "Expect: 100-continue" err && |
| grep "POST git-receive-pack ([0-9]* bytes)" err && |
| (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && |
| test $HEAD = $(git rev-parse --verify HEAD)) |
| ' |
| |
| test_expect_success 'push already up-to-date' ' |
| git push |
| ' |
| |
| test_expect_success 'create and delete remote branch' ' |
| cd "$ROOT_PATH"/test_repo_clone && |
| git checkout -b dev && |
| : >path3 && |
| git add path3 && |
| test_tick && |
| git commit -m dev && |
| git push origin dev && |
| git push origin :dev && |
| test_must_fail git show-ref --verify refs/remotes/origin/dev |
| ' |
| |
| cat >"$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update" <<EOF |
| #!/bin/sh |
| exit 1 |
| EOF |
| chmod a+x "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update" |
| |
| cat >exp <<EOF |
| remote: error: hook declined to update refs/heads/dev2 |
| To http://127.0.0.1:$LIB_HTTPD_PORT/smart/test_repo.git |
| ! [remote rejected] dev2 -> dev2 (hook declined) |
| error: failed to push some refs to 'http://127.0.0.1:$LIB_HTTPD_PORT/smart/test_repo.git' |
| EOF |
| |
| test_expect_success 'rejected update prints status' ' |
| cd "$ROOT_PATH"/test_repo_clone && |
| git checkout -b dev2 && |
| : >path4 && |
| git add path4 && |
| test_tick && |
| git commit -m dev2 && |
| test_must_fail git push origin dev2 2>act && |
| sed -e "/^remote: /s/ *$//" <act >cmp && |
| test_cmp exp cmp |
| ' |
| rm -f "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update" |
| |
| cat >exp <<EOF |
| |
| GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 |
| POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200 |
| GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200 |
| POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200 |
| GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200 |
| GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200 |
| POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200 |
| GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200 |
| POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200 |
| GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200 |
| POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200 |
| EOF |
| test_expect_success 'used receive-pack service' ' |
| sed -e " |
| s/^.* \"// |
| s/\"// |
| s/ [1-9][0-9]*\$// |
| s/^GET /GET / |
| " >act <"$HTTPD_ROOT_PATH"/access.log && |
| test_cmp exp act |
| ' |
| |
| test_http_push_nonff "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git \ |
| "$ROOT_PATH"/test_repo_clone master |
| |
| test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper' ' |
| # create a dissimilarly-named remote ref so that git is unable to match the |
| # two refs (viz. local, remote) unless an explicit refspec is provided. |
| git push origin master:retsam |
| |
| echo "change changed" > path2 && |
| git commit -a -m path2 --amend && |
| |
| # push master too; this ensures there is at least one '"'push'"' command to |
| # the remote helper and triggers interaction with the helper. |
| test_must_fail git push -v origin +master master:retsam >output 2>&1' |
| |
| test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: remote output' ' |
| grep "^ + [a-f0-9]*\.\.\.[a-f0-9]* *master -> master (forced update)$" output && |
| grep "^ ! \[rejected\] *master -> retsam (non-fast-forward)$" output |
| ' |
| |
| test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: our output' ' |
| test_i18ngrep "Updates were rejected because" \ |
| output |
| ' |
| |
| test_expect_success 'push (chunked)' ' |
| git checkout master && |
| test_commit commit path3 && |
| HEAD=$(git rev-parse --verify HEAD) && |
| git config http.postbuffer 4 && |
| test_when_finished "git config --unset http.postbuffer" && |
| git push -v -v origin $BRANCH 2>err && |
| grep "POST git-receive-pack (chunked)" err && |
| (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && |
| test $HEAD = $(git rev-parse --verify HEAD)) |
| ' |
| |
| test_expect_success 'push --all can push to empty repo' ' |
| d=$HTTPD_DOCUMENT_ROOT_PATH/empty-all.git && |
| git init --bare "$d" && |
| git --git-dir="$d" config http.receivepack true && |
| git push --all "$HTTPD_URL"/smart/empty-all.git |
| ' |
| |
| test_expect_success 'push --mirror can push to empty repo' ' |
| d=$HTTPD_DOCUMENT_ROOT_PATH/empty-mirror.git && |
| git init --bare "$d" && |
| git --git-dir="$d" config http.receivepack true && |
| git push --mirror "$HTTPD_URL"/smart/empty-mirror.git |
| ' |
| |
| test_expect_success 'push --all to repo with alternates' ' |
| s=$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git && |
| d=$HTTPD_DOCUMENT_ROOT_PATH/alternates-all.git && |
| git clone --bare --shared "$s" "$d" && |
| git --git-dir="$d" config http.receivepack true && |
| git --git-dir="$d" repack -adl && |
| git push --all "$HTTPD_URL"/smart/alternates-all.git |
| ' |
| |
| test_expect_success 'push --mirror to repo with alternates' ' |
| s=$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git && |
| d=$HTTPD_DOCUMENT_ROOT_PATH/alternates-mirror.git && |
| git clone --bare --shared "$s" "$d" && |
| git --git-dir="$d" config http.receivepack true && |
| git --git-dir="$d" repack -adl && |
| git push --mirror "$HTTPD_URL"/smart/alternates-mirror.git |
| ' |
| |
| test_expect_success TTY 'push shows progress when stderr is a tty' ' |
| cd "$ROOT_PATH"/test_repo_clone && |
| test_commit noisy && |
| test_terminal git push >output 2>&1 && |
| grep "^Writing objects" output |
| ' |
| |
| test_expect_success TTY 'push --quiet silences status and progress' ' |
| cd "$ROOT_PATH"/test_repo_clone && |
| test_commit quiet && |
| test_terminal git push --quiet >output 2>&1 && |
| test_cmp /dev/null output |
| ' |
| |
| test_expect_success TTY 'push --no-progress silences progress but not status' ' |
| cd "$ROOT_PATH"/test_repo_clone && |
| test_commit no-progress && |
| test_terminal git push --no-progress >output 2>&1 && |
| grep "^To http" output && |
| ! grep "^Writing objects" |
| ' |
| |
| test_expect_success 'push --progress shows progress to non-tty' ' |
| cd "$ROOT_PATH"/test_repo_clone && |
| test_commit progress && |
| git push --progress >output 2>&1 && |
| grep "^To http" output && |
| grep "^Writing objects" output |
| ' |
| |
| test_expect_success 'http push gives sane defaults to reflog' ' |
| cd "$ROOT_PATH"/test_repo_clone && |
| test_commit reflog-test && |
| git push "$HTTPD_URL"/smart/test_repo.git && |
| git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \ |
| log -g -1 --format="%gn <%ge>" >actual && |
| echo "anonymous <anonymous@http.127.0.0.1>" >expect && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'http push respects GIT_COMMITTER_* in reflog' ' |
| cd "$ROOT_PATH"/test_repo_clone && |
| test_commit custom-reflog-test && |
| git push "$HTTPD_URL"/smart_custom_env/test_repo.git && |
| git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \ |
| log -g -1 --format="%gn <%ge>" >actual && |
| echo "Custom User <custom@example.com>" >expect && |
| test_cmp expect actual |
| ' |
| |
| stop_httpd |
| test_done |