| git-maintenance(1) |
| ================== |
| |
| NAME |
| ---- |
| git-maintenance - Run tasks to optimize Git repository data |
| |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'git maintenance' run [<options>] |
| 'git maintenance' start [--scheduler=<scheduler>] |
| 'git maintenance' (stop|register|unregister) [<options>] |
| |
| |
| DESCRIPTION |
| ----------- |
| Run tasks to optimize Git repository data, speeding up other Git commands |
| and reducing storage requirements for the repository. |
| |
| Git commands that add repository data, such as `git add` or `git fetch`, |
| are optimized for a responsive user experience. These commands do not take |
| time to optimize the Git data, since such optimizations scale with the full |
| size of the repository while these user commands each perform a relatively |
| small action. |
| |
| The `git maintenance` command provides flexibility for how to optimize the |
| Git repository. |
| |
| SUBCOMMANDS |
| ----------- |
| |
| run:: |
| Run one or more maintenance tasks. If one or more `--task` options |
| are specified, then those tasks are run in that order. Otherwise, |
| the tasks are determined by which `maintenance.<task>.enabled` |
| config options are true. By default, only `maintenance.gc.enabled` |
| is true. |
| |
| start:: |
| Start running maintenance on the current repository. This performs |
| the same config updates as the `register` subcommand, then updates |
| the background scheduler to run `git maintenance run --scheduled` |
| on an hourly basis. |
| |
| stop:: |
| Halt the background maintenance schedule. The current repository |
| is not removed from the list of maintained repositories, in case |
| the background maintenance is restarted later. |
| |
| register:: |
| Initialize Git config values so any scheduled maintenance will start |
| running on this repository. This adds the repository to the |
| `maintenance.repo` config variable in the current user's global config, |
| or the config specified by --config-file option, and enables some |
| recommended configuration values for `maintenance.<task>.schedule`. The |
| tasks that are enabled are safe for running in the background without |
| disrupting foreground processes. |
| + |
| The `register` subcommand will also set the `maintenance.strategy` config |
| value to `incremental`, if this value is not previously set. The |
| `incremental` strategy uses the following schedule for each maintenance |
| task: |
| + |
| -- |
| * `gc`: disabled. |
| * `commit-graph`: hourly. |
| * `prefetch`: hourly. |
| * `loose-objects`: daily. |
| * `incremental-repack`: daily. |
| -- |
| + |
| `git maintenance register` will also disable foreground maintenance by |
| setting `maintenance.auto = false` in the current repository. This config |
| setting will remain after a `git maintenance unregister` command. |
| |
| unregister:: |
| Remove the current repository from background maintenance. This |
| only removes the repository from the configured list. It does not |
| stop the background maintenance processes from running. |
| + |
| The `unregister` subcommand will report an error if the current repository |
| is not already registered. Use the `--force` option to return success even |
| when the current repository is not registered. |
| |
| TASKS |
| ----- |
| |
| commit-graph:: |
| The `commit-graph` job updates the `commit-graph` files incrementally, |
| then verifies that the written data is correct. The incremental |
| write is safe to run alongside concurrent Git processes since it |
| will not expire `.graph` files that were in the previous |
| `commit-graph-chain` file. They will be deleted by a later run based |
| on the expiration delay. |
| |
| prefetch:: |
| The `prefetch` task updates the object directory with the latest |
| objects from all registered remotes. For each remote, a `git fetch` |
| command is run. The configured refspec is modified to place all |
| requested refs within `refs/prefetch/`. Also, tags are not updated. |
| + |
| This is done to avoid disrupting the remote-tracking branches. The end users |
| expect these refs to stay unmoved unless they initiate a fetch. With prefetch |
| task, however, the objects necessary to complete a later real fetch would |
| already be obtained, so the real fetch would go faster. In the ideal case, |
| it will just become an update to a bunch of remote-tracking branches without |
| any object transfer. |
| |
| gc:: |
| Clean up unnecessary files and optimize the local repository. "GC" |
| stands for "garbage collection," but this task performs many |
| smaller tasks. This task can be expensive for large repositories, |
| as it repacks all Git objects into a single pack-file. It can also |
| be disruptive in some situations, as it deletes stale data. See |
| linkgit:git-gc[1] for more details on garbage collection in Git. |
| |
| loose-objects:: |
| The `loose-objects` job cleans up loose objects and places them into |
| pack-files. In order to prevent race conditions with concurrent Git |
| commands, it follows a two-step process. First, it deletes any loose |
| objects that already exist in a pack-file; concurrent Git processes |
| will examine the pack-file for the object data instead of the loose |
| object. Second, it creates a new pack-file (starting with "loose-") |
| containing a batch of loose objects. The batch size is limited to 50 |
| thousand objects to prevent the job from taking too long on a |
| repository with many loose objects. The `gc` task writes unreachable |
| objects as loose objects to be cleaned up by a later step only if |
| they are not re-added to a pack-file; for this reason it is not |
| advisable to enable both the `loose-objects` and `gc` tasks at the |
| same time. |
| |
| incremental-repack:: |
| The `incremental-repack` job repacks the object directory |
| using the `multi-pack-index` feature. In order to prevent race |
| conditions with concurrent Git commands, it follows a two-step |
| process. First, it calls `git multi-pack-index expire` to delete |
| pack-files unreferenced by the `multi-pack-index` file. Second, it |
| calls `git multi-pack-index repack` to select several small |
| pack-files and repack them into a bigger one, and then update the |
| `multi-pack-index` entries that refer to the small pack-files to |
| refer to the new pack-file. This prepares those small pack-files |
| for deletion upon the next run of `git multi-pack-index expire`. |
| The selection of the small pack-files is such that the expected |
| size of the big pack-file is at least the batch size; see the |
| `--batch-size` option for the `repack` subcommand in |
| linkgit:git-multi-pack-index[1]. The default batch-size is zero, |
| which is a special case that attempts to repack all pack-files |
| into a single pack-file. |
| |
| pack-refs:: |
| The `pack-refs` task collects the loose reference files and |
| collects them into a single file. This speeds up operations that |
| need to iterate across many references. See linkgit:git-pack-refs[1] |
| for more information. |
| |
| OPTIONS |
| ------- |
| --auto:: |
| When combined with the `run` subcommand, run maintenance tasks |
| only if certain thresholds are met. For example, the `gc` task |
| runs when the number of loose objects exceeds the number stored |
| in the `gc.auto` config setting, or when the number of pack-files |
| exceeds the `gc.autoPackLimit` config setting. Not compatible with |
| the `--schedule` option. |
| |
| --schedule:: |
| When combined with the `run` subcommand, run maintenance tasks |
| only if certain time conditions are met, as specified by the |
| `maintenance.<task>.schedule` config value for each `<task>`. |
| This config value specifies a number of seconds since the last |
| time that task ran, according to the `maintenance.<task>.lastRun` |
| config value. The tasks that are tested are those provided by |
| the `--task=<task>` option(s) or those with |
| `maintenance.<task>.enabled` set to true. |
| |
| --quiet:: |
| Do not report progress or other information over `stderr`. |
| |
| --task=<task>:: |
| If this option is specified one or more times, then only run the |
| specified tasks in the specified order. If no `--task=<task>` |
| arguments are specified, then only the tasks with |
| `maintenance.<task>.enabled` configured as `true` are considered. |
| See the 'TASKS' section for the list of accepted `<task>` values. |
| |
| --scheduler=auto|crontab|systemd-timer|launchctl|schtasks:: |
| When combined with the `start` subcommand, specify the scheduler |
| for running the hourly, daily and weekly executions of |
| `git maintenance run`. |
| Possible values for `<scheduler>` are `auto`, `crontab` |
| (POSIX), `systemd-timer` (Linux), `launchctl` (macOS), and |
| `schtasks` (Windows). When `auto` is specified, the |
| appropriate platform-specific scheduler is used; on Linux, |
| `systemd-timer` is used if available, otherwise |
| `crontab`. Default is `auto`. |
| |
| |
| TROUBLESHOOTING |
| --------------- |
| The `git maintenance` command is designed to simplify the repository |
| maintenance patterns while minimizing user wait time during Git commands. |
| A variety of configuration options are available to allow customizing this |
| process. The default maintenance options focus on operations that complete |
| quickly, even on large repositories. |
| |
| Users may find some cases where scheduled maintenance tasks do not run as |
| frequently as intended. Each `git maintenance run` command takes a lock on |
| the repository's object database, and this prevents other concurrent |
| `git maintenance run` commands from running on the same repository. Without |
| this safeguard, competing processes could leave the repository in an |
| unpredictable state. |
| |
| The background maintenance schedule runs `git maintenance run` processes |
| on an hourly basis. Each run executes the "hourly" tasks. At midnight, |
| that process also executes the "daily" tasks. At midnight on the first day |
| of the week, that process also executes the "weekly" tasks. A single |
| process iterates over each registered repository, performing the scheduled |
| tasks for that frequency. Depending on the number of registered |
| repositories and their sizes, this process may take longer than an hour. |
| In this case, multiple `git maintenance run` commands may run on the same |
| repository at the same time, colliding on the object database lock. This |
| results in one of the two tasks not running. |
| |
| If you find that some maintenance windows are taking longer than one hour |
| to complete, then consider reducing the complexity of your maintenance |
| tasks. For example, the `gc` task is much slower than the |
| `incremental-repack` task. However, this comes at a cost of a slightly |
| larger object database. Consider moving more expensive tasks to be run |
| less frequently. |
| |
| Expert users may consider scheduling their own maintenance tasks using a |
| different schedule than is available through `git maintenance start` and |
| Git configuration options. These users should be aware of the object |
| database lock and how concurrent `git maintenance run` commands behave. |
| Further, the `git gc` command should not be combined with |
| `git maintenance run` commands. `git gc` modifies the object database |
| but does not take the lock in the same way as `git maintenance run`. If |
| possible, use `git maintenance run --task=gc` instead of `git gc`. |
| |
| The following sections describe the mechanisms put in place to run |
| background maintenance by `git maintenance start` and how to customize |
| them. |
| |
| BACKGROUND MAINTENANCE ON POSIX SYSTEMS |
| --------------------------------------- |
| |
| The standard mechanism for scheduling background tasks on POSIX systems |
| is cron(8). This tool executes commands based on a given schedule. The |
| current list of user-scheduled tasks can be found by running `crontab -l`. |
| The schedule written by `git maintenance start` is similar to this: |
| |
| ----------------------------------------------------------------------- |
| # BEGIN GIT MAINTENANCE SCHEDULE |
| # The following schedule was created by Git |
| # Any edits made in this region might be |
| # replaced in the future by a Git command. |
| |
| 0 1-23 * * * "/<path>/git" --exec-path="/<path>" for-each-repo --config=maintenance.repo maintenance run --schedule=hourly |
| 0 0 * * 1-6 "/<path>/git" --exec-path="/<path>" for-each-repo --config=maintenance.repo maintenance run --schedule=daily |
| 0 0 * * 0 "/<path>/git" --exec-path="/<path>" for-each-repo --config=maintenance.repo maintenance run --schedule=weekly |
| |
| # END GIT MAINTENANCE SCHEDULE |
| ----------------------------------------------------------------------- |
| |
| The comments are used as a region to mark the schedule as written by Git. |
| Any modifications within this region will be completely deleted by |
| `git maintenance stop` or overwritten by `git maintenance start`. |
| |
| The `crontab` entry specifies the full path of the `git` executable to |
| ensure that the executed `git` command is the same one with which |
| `git maintenance start` was issued independent of `PATH`. If the same user |
| runs `git maintenance start` with multiple Git executables, then only the |
| latest executable is used. |
| |
| These commands use `git for-each-repo --config=maintenance.repo` to run |
| `git maintenance run --schedule=<frequency>` on each repository listed in |
| the multi-valued `maintenance.repo` config option. These are typically |
| loaded from the user-specific global config. The `git maintenance` process |
| then determines which maintenance tasks are configured to run on each |
| repository with each `<frequency>` using the `maintenance.<task>.schedule` |
| config options. These values are loaded from the global or repository |
| config values. |
| |
| If the config values are insufficient to achieve your desired background |
| maintenance schedule, then you can create your own schedule. If you run |
| `crontab -e`, then an editor will load with your user-specific `cron` |
| schedule. In that editor, you can add your own schedule lines. You could |
| start by adapting the default schedule listed earlier, or you could read |
| the crontab(5) documentation for advanced scheduling techniques. Please |
| do use the full path and `--exec-path` techniques from the default |
| schedule to ensure you are executing the correct binaries in your |
| schedule. |
| |
| |
| BACKGROUND MAINTENANCE ON LINUX SYSTEMD SYSTEMS |
| ----------------------------------------------- |
| |
| While Linux supports `cron`, depending on the distribution, `cron` may |
| be an optional package not necessarily installed. On modern Linux |
| distributions, systemd timers are superseding it. |
| |
| If user systemd timers are available, they will be used as a replacement |
| of `cron`. |
| |
| In this case, `git maintenance start` will create user systemd timer units |
| and start the timers. The current list of user-scheduled tasks can be found |
| by running `systemctl --user list-timers`. The timers written by `git |
| maintenance start` are similar to this: |
| |
| ----------------------------------------------------------------------- |
| $ systemctl --user list-timers |
| NEXT LEFT LAST PASSED UNIT ACTIVATES |
| Thu 2021-04-29 19:00:00 CEST 42min left Thu 2021-04-29 18:00:11 CEST 17min ago git-maintenance@hourly.timer git-maintenance@hourly.service |
| Fri 2021-04-30 00:00:00 CEST 5h 42min left Thu 2021-04-29 00:00:11 CEST 18h ago git-maintenance@daily.timer git-maintenance@daily.service |
| Mon 2021-05-03 00:00:00 CEST 3 days left Mon 2021-04-26 00:00:11 CEST 3 days ago git-maintenance@weekly.timer git-maintenance@weekly.service |
| ----------------------------------------------------------------------- |
| |
| One timer is registered for each `--schedule=<frequency>` option. |
| |
| The definition of the systemd units can be inspected in the following files: |
| |
| ----------------------------------------------------------------------- |
| ~/.config/systemd/user/git-maintenance@.timer |
| ~/.config/systemd/user/git-maintenance@.service |
| ~/.config/systemd/user/timers.target.wants/git-maintenance@hourly.timer |
| ~/.config/systemd/user/timers.target.wants/git-maintenance@daily.timer |
| ~/.config/systemd/user/timers.target.wants/git-maintenance@weekly.timer |
| ----------------------------------------------------------------------- |
| |
| `git maintenance start` will overwrite these files and start the timer |
| again with `systemctl --user`, so any customization should be done by |
| creating a drop-in file, i.e. a `.conf` suffixed file in the |
| `~/.config/systemd/user/git-maintenance@.service.d` directory. |
| |
| `git maintenance stop` will stop the user systemd timers and delete |
| the above mentioned files. |
| |
| For more details, see `systemd.timer(5)`. |
| |
| |
| BACKGROUND MAINTENANCE ON MACOS SYSTEMS |
| --------------------------------------- |
| |
| While macOS technically supports `cron`, using `crontab -e` requires |
| elevated privileges and the executed process does not have a full user |
| context. Without a full user context, Git and its credential helpers |
| cannot access stored credentials, so some maintenance tasks are not |
| functional. |
| |
| Instead, `git maintenance start` interacts with the `launchctl` tool, |
| which is the recommended way to schedule timed jobs in macOS. Scheduling |
| maintenance through `git maintenance (start|stop)` requires some |
| `launchctl` features available only in macOS 10.11 or later. |
| |
| Your user-specific scheduled tasks are stored as XML-formatted `.plist` |
| files in `~/Library/LaunchAgents/`. You can see the currently-registered |
| tasks using the following command: |
| |
| ----------------------------------------------------------------------- |
| $ ls ~/Library/LaunchAgents/org.git-scm.git* |
| org.git-scm.git.daily.plist |
| org.git-scm.git.hourly.plist |
| org.git-scm.git.weekly.plist |
| ----------------------------------------------------------------------- |
| |
| One task is registered for each `--schedule=<frequency>` option. To |
| inspect how the XML format describes each schedule, open one of these |
| `.plist` files in an editor and inspect the `<array>` element following |
| the `<key>StartCalendarInterval</key>` element. |
| |
| `git maintenance start` will overwrite these files and register the |
| tasks again with `launchctl`, so any customizations should be done by |
| creating your own `.plist` files with distinct names. Similarly, the |
| `git maintenance stop` command will unregister the tasks with `launchctl` |
| and delete the `.plist` files. |
| |
| To create more advanced customizations to your background tasks, see |
| launchctl.plist(5) for more information. |
| |
| |
| BACKGROUND MAINTENANCE ON WINDOWS SYSTEMS |
| ----------------------------------------- |
| |
| Windows does not support `cron` and instead has its own system for |
| scheduling background tasks. The `git maintenance start` command uses |
| the `schtasks` command to submit tasks to this system. You can inspect |
| all background tasks using the Task Scheduler application. The tasks |
| added by Git have names of the form `Git Maintenance (<frequency>)`. |
| The Task Scheduler GUI has ways to inspect these tasks, but you can also |
| export the tasks to XML files and view the details there. |
| |
| Note that since Git is a console application, these background tasks |
| create a console window visible to the current user. This can be changed |
| manually by selecting the "Run whether user is logged in or not" option |
| in Task Scheduler. This change requires a password input, which is why |
| `git maintenance start` does not select it by default. |
| |
| If you want to customize the background tasks, please rename the tasks |
| so future calls to `git maintenance (start|stop)` do not overwrite your |
| custom tasks. |
| |
| CONFIGURATION |
| ------------- |
| |
| include::includes/cmd-config-section-all.txt[] |
| |
| include::config/maintenance.txt[] |
| |
| |
| GIT |
| --- |
| Part of the linkgit:git[1] suite |