| git-interpret-trailers(1) |
| ========================= |
| |
| NAME |
| ---- |
| git-interpret-trailers - Add or parse structured information in commit messages |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'git interpret-trailers' [--in-place] [--trim-empty] |
| [(--trailer <token>[(=|:)<value>])...] |
| [--parse] [<file>...] |
| |
| DESCRIPTION |
| ----------- |
| Help parsing or adding 'trailers' lines, that look similar to RFC 822 e-mail |
| headers, at the end of the otherwise free-form part of a commit |
| message. |
| |
| This command reads some patches or commit messages from either the |
| <file> arguments or the standard input if no <file> is specified. If |
| `--parse` is specified, the output consists of the parsed trailers. |
| |
| Otherwise, this command applies the arguments passed using the |
| `--trailer` option, if any, to the commit message part of each input |
| file. The result is emitted on the standard output. |
| |
| Some configuration variables control the way the `--trailer` arguments |
| are applied to each commit message and the way any existing trailer in |
| the commit message is changed. They also make it possible to |
| automatically add some trailers. |
| |
| By default, a '<token>=<value>' or '<token>:<value>' argument given |
| using `--trailer` will be appended after the existing trailers only if |
| the last trailer has a different (<token>, <value>) pair (or if there |
| is no existing trailer). The <token> and <value> parts will be trimmed |
| to remove starting and trailing whitespace, and the resulting trimmed |
| <token> and <value> will appear in the message like this: |
| |
| ------------------------------------------------ |
| token: value |
| ------------------------------------------------ |
| |
| This means that the trimmed <token> and <value> will be separated by |
| `': '` (one colon followed by one space). |
| |
| By default the new trailer will appear at the end of all the existing |
| trailers. If there is no existing trailer, the new trailer will appear |
| after the commit message part of the output, and, if there is no line |
| with only spaces at the end of the commit message part, one blank line |
| will be added before the new trailer. |
| |
| Existing trailers are extracted from the input message by looking for |
| a group of one or more lines that (i) is all trailers, or (ii) contains at |
| least one Git-generated or user-configured trailer and consists of at |
| least 25% trailers. |
| The group must be preceded by one or more empty (or whitespace-only) lines. |
| The group must either be at the end of the message or be the last |
| non-whitespace lines before a line that starts with '---' (followed by a |
| space or the end of the line). Such three minus signs start the patch |
| part of the message. See also `--no-divider` below. |
| |
| When reading trailers, there can be no whitespace before or inside the |
| token, but any number of regular space and tab characters are allowed |
| between the token and the separator. There can be whitespaces before, |
| inside or after the value. The value may be split over multiple lines |
| with each subsequent line starting with at least one whitespace, like |
| the "folding" in RFC 822. |
| |
| Note that 'trailers' do not follow and are not intended to follow many |
| rules for RFC 822 headers. For example they do not follow |
| the encoding rules and probably many other rules. |
| |
| OPTIONS |
| ------- |
| --in-place:: |
| Edit the files in place. |
| |
| --trim-empty:: |
| If the <value> part of any trailer contains only whitespace, |
| the whole trailer will be removed from the resulting message. |
| This applies to existing trailers as well as new trailers. |
| |
| --trailer <token>[(=|:)<value>]:: |
| Specify a (<token>, <value>) pair that should be applied as a |
| trailer to the input messages. See the description of this |
| command. |
| |
| --where <placement>:: |
| --no-where:: |
| Specify where all new trailers will be added. A setting |
| provided with '--where' overrides all configuration variables |
| and applies to all '--trailer' options until the next occurrence of |
| '--where' or '--no-where'. Possible values are `after`, `before`, |
| `end` or `start`. |
| |
| --if-exists <action>:: |
| --no-if-exists:: |
| Specify what action will be performed when there is already at |
| least one trailer with the same <token> in the message. A setting |
| provided with '--if-exists' overrides all configuration variables |
| and applies to all '--trailer' options until the next occurrence of |
| '--if-exists' or '--no-if-exists'. Possible actions are `addIfDifferent`, |
| `addIfDifferentNeighbor`, `add`, `replace` and `doNothing`. |
| |
| --if-missing <action>:: |
| --no-if-missing:: |
| Specify what action will be performed when there is no other |
| trailer with the same <token> in the message. A setting |
| provided with '--if-missing' overrides all configuration variables |
| and applies to all '--trailer' options until the next occurrence of |
| '--if-missing' or '--no-if-missing'. Possible actions are `doNothing` |
| or `add`. |
| |
| --only-trailers:: |
| Output only the trailers, not any other parts of the input. |
| |
| --only-input:: |
| Output only trailers that exist in the input; do not add any |
| from the command-line or by following configured `trailer.*` |
| rules. |
| |
| --unfold:: |
| Remove any whitespace-continuation in trailers, so that each |
| trailer appears on a line by itself with its full content. |
| |
| --parse:: |
| A convenience alias for `--only-trailers --only-input |
| --unfold`. |
| |
| --no-divider:: |
| Do not treat `---` as the end of the commit message. Use this |
| when you know your input contains just the commit message itself |
| (and not an email or the output of `git format-patch`). |
| |
| CONFIGURATION VARIABLES |
| ----------------------- |
| |
| trailer.separators:: |
| This option tells which characters are recognized as trailer |
| separators. By default only ':' is recognized as a trailer |
| separator, except that '=' is always accepted on the command |
| line for compatibility with other git commands. |
| + |
| The first character given by this option will be the default character |
| used when another separator is not specified in the config for this |
| trailer. |
| + |
| For example, if the value for this option is "%=$", then only lines |
| using the format '<token><sep><value>' with <sep> containing '%', '=' |
| or '$' and then spaces will be considered trailers. And '%' will be |
| the default separator used, so by default trailers will appear like: |
| '<token>% <value>' (one percent sign and one space will appear between |
| the token and the value). |
| |
| trailer.where:: |
| This option tells where a new trailer will be added. |
| + |
| This can be `end`, which is the default, `start`, `after` or `before`. |
| + |
| If it is `end`, then each new trailer will appear at the end of the |
| existing trailers. |
| + |
| If it is `start`, then each new trailer will appear at the start, |
| instead of the end, of the existing trailers. |
| + |
| If it is `after`, then each new trailer will appear just after the |
| last trailer with the same <token>. |
| + |
| If it is `before`, then each new trailer will appear just before the |
| first trailer with the same <token>. |
| |
| trailer.ifexists:: |
| This option makes it possible to choose what action will be |
| performed when there is already at least one trailer with the |
| same <token> in the message. |
| + |
| The valid values for this option are: `addIfDifferentNeighbor` (this |
| is the default), `addIfDifferent`, `add`, `replace` or `doNothing`. |
| + |
| With `addIfDifferentNeighbor`, a new trailer will be added only if no |
| trailer with the same (<token>, <value>) pair is above or below the line |
| where the new trailer will be added. |
| + |
| With `addIfDifferent`, a new trailer will be added only if no trailer |
| with the same (<token>, <value>) pair is already in the message. |
| + |
| With `add`, a new trailer will be added, even if some trailers with |
| the same (<token>, <value>) pair are already in the message. |
| + |
| With `replace`, an existing trailer with the same <token> will be |
| deleted and the new trailer will be added. The deleted trailer will be |
| the closest one (with the same <token>) to the place where the new one |
| will be added. |
| + |
| With `doNothing`, nothing will be done; that is no new trailer will be |
| added if there is already one with the same <token> in the message. |
| |
| trailer.ifmissing:: |
| This option makes it possible to choose what action will be |
| performed when there is not yet any trailer with the same |
| <token> in the message. |
| + |
| The valid values for this option are: `add` (this is the default) and |
| `doNothing`. |
| + |
| With `add`, a new trailer will be added. |
| + |
| With `doNothing`, nothing will be done. |
| |
| trailer.<token>.key:: |
| This `key` will be used instead of <token> in the trailer. At |
| the end of this key, a separator can appear and then some |
| space characters. By default the only valid separator is ':', |
| but this can be changed using the `trailer.separators` config |
| variable. |
| + |
| If there is a separator, then the key will be used instead of both the |
| <token> and the default separator when adding the trailer. |
| |
| trailer.<token>.where:: |
| This option takes the same values as the 'trailer.where' |
| configuration variable and it overrides what is specified by |
| that option for trailers with the specified <token>. |
| |
| trailer.<token>.ifexists:: |
| This option takes the same values as the 'trailer.ifexists' |
| configuration variable and it overrides what is specified by |
| that option for trailers with the specified <token>. |
| |
| trailer.<token>.ifmissing:: |
| This option takes the same values as the 'trailer.ifmissing' |
| configuration variable and it overrides what is specified by |
| that option for trailers with the specified <token>. |
| |
| trailer.<token>.command:: |
| This option behaves in the same way as 'trailer.<token>.cmd', except |
| that it doesn't pass anything as argument to the specified command. |
| Instead the first occurrence of substring $ARG is replaced by the |
| value that would be passed as argument. |
| + |
| The 'trailer.<token>.command' option has been deprecated in favor of |
| 'trailer.<token>.cmd' due to the fact that $ARG in the user's command is |
| only replaced once and that the original way of replacing $ARG is not safe. |
| + |
| When both 'trailer.<token>.cmd' and 'trailer.<token>.command' are given |
| for the same <token>, 'trailer.<token>.cmd' is used and |
| 'trailer.<token>.command' is ignored. |
| |
| trailer.<token>.cmd:: |
| This option can be used to specify a shell command that will be called: |
| once to automatically add a trailer with the specified <token>, and then |
| each time a '--trailer <token>=<value>' argument to modify the <value> of |
| the trailer that this option would produce. |
| + |
| When the specified command is first called to add a trailer |
| with the specified <token>, the behavior is as if a special |
| '--trailer <token>=<value>' argument was added at the beginning |
| of the "git interpret-trailers" command, where <value> |
| is taken to be the standard output of the command with any |
| leading and trailing whitespace trimmed off. |
| + |
| If some '--trailer <token>=<value>' arguments are also passed |
| on the command line, the command is called again once for each |
| of these arguments with the same <token>. And the <value> part |
| of these arguments, if any, will be passed to the command as its |
| first argument. This way the command can produce a <value> computed |
| from the <value> passed in the '--trailer <token>=<value>' argument. |
| |
| EXAMPLES |
| -------- |
| |
| * Configure a 'sign' trailer with a 'Signed-off-by' key, and then |
| add two of these trailers to a message: |
| + |
| ------------ |
| $ git config trailer.sign.key "Signed-off-by" |
| $ cat msg.txt |
| subject |
| |
| message |
| $ cat msg.txt | git interpret-trailers --trailer 'sign: Alice <alice@example.com>' --trailer 'sign: Bob <bob@example.com>' |
| subject |
| |
| message |
| |
| Signed-off-by: Alice <alice@example.com> |
| Signed-off-by: Bob <bob@example.com> |
| ------------ |
| |
| * Use the `--in-place` option to edit a message file in place: |
| + |
| ------------ |
| $ cat msg.txt |
| subject |
| |
| message |
| |
| Signed-off-by: Bob <bob@example.com> |
| $ git interpret-trailers --trailer 'Acked-by: Alice <alice@example.com>' --in-place msg.txt |
| $ cat msg.txt |
| subject |
| |
| message |
| |
| Signed-off-by: Bob <bob@example.com> |
| Acked-by: Alice <alice@example.com> |
| ------------ |
| |
| * Extract the last commit as a patch, and add a 'Cc' and a |
| 'Reviewed-by' trailer to it: |
| + |
| ------------ |
| $ git format-patch -1 |
| 0001-foo.patch |
| $ git interpret-trailers --trailer 'Cc: Alice <alice@example.com>' --trailer 'Reviewed-by: Bob <bob@example.com>' 0001-foo.patch >0001-bar.patch |
| ------------ |
| |
| * Configure a 'sign' trailer with a command to automatically add a |
| 'Signed-off-by: ' with the author information only if there is no |
| 'Signed-off-by: ' already, and show how it works: |
| + |
| ------------ |
| $ git config trailer.sign.key "Signed-off-by: " |
| $ git config trailer.sign.ifmissing add |
| $ git config trailer.sign.ifexists doNothing |
| $ git config trailer.sign.command 'echo "$(git config user.name) <$(git config user.email)>"' |
| $ git interpret-trailers <<EOF |
| > EOF |
| |
| Signed-off-by: Bob <bob@example.com> |
| $ git interpret-trailers <<EOF |
| > Signed-off-by: Alice <alice@example.com> |
| > EOF |
| |
| Signed-off-by: Alice <alice@example.com> |
| ------------ |
| |
| * Configure a 'fix' trailer with a key that contains a '#' and no |
| space after this character, and show how it works: |
| + |
| ------------ |
| $ git config trailer.separators ":#" |
| $ git config trailer.fix.key "Fix #" |
| $ echo "subject" | git interpret-trailers --trailer fix=42 |
| subject |
| |
| Fix #42 |
| ------------ |
| |
| * Configure a 'help' trailer with a cmd use a script `glog-find-author` |
| which search specified author identity from git log in git repository |
| and show how it works: |
| + |
| ------------ |
| $ cat ~/bin/glog-find-author |
| #!/bin/sh |
| test -n "$1" && git log --author="$1" --pretty="%an <%ae>" -1 || true |
| $ git config trailer.help.key "Helped-by: " |
| $ git config trailer.help.ifExists "addIfDifferentNeighbor" |
| $ git config trailer.help.cmd "~/bin/glog-find-author" |
| $ git interpret-trailers --trailer="help:Junio" --trailer="help:Couder" <<EOF |
| > subject |
| > |
| > message |
| > |
| > EOF |
| subject |
| |
| message |
| |
| Helped-by: Junio C Hamano <gitster@pobox.com> |
| Helped-by: Christian Couder <christian.couder@gmail.com> |
| ------------ |
| |
| * Configure a 'ref' trailer with a cmd use a script `glog-grep` |
| to grep last relevant commit from git log in the git repository |
| and show how it works: |
| + |
| ------------ |
| $ cat ~/bin/glog-grep |
| #!/bin/sh |
| test -n "$1" && git log --grep "$1" --pretty=reference -1 || true |
| $ git config trailer.ref.key "Reference-to: " |
| $ git config trailer.ref.ifExists "replace" |
| $ git config trailer.ref.cmd "~/bin/glog-grep" |
| $ git interpret-trailers --trailer="ref:Add copyright notices." <<EOF |
| > subject |
| > |
| > message |
| > |
| > EOF |
| subject |
| |
| message |
| |
| Reference-to: 8bc9a0c769 (Add copyright notices., 2005-04-07) |
| ------------ |
| |
| * Configure a 'see' trailer with a command to show the subject of a |
| commit that is related, and show how it works: |
| + |
| ------------ |
| $ git config trailer.see.key "See-also: " |
| $ git config trailer.see.ifExists "replace" |
| $ git config trailer.see.ifMissing "doNothing" |
| $ git config trailer.see.command "git log -1 --oneline --format=\"%h (%s)\" --abbrev-commit --abbrev=14 \$ARG" |
| $ git interpret-trailers <<EOF |
| > subject |
| > |
| > message |
| > |
| > see: HEAD~2 |
| > EOF |
| subject |
| |
| message |
| |
| See-also: fe3187489d69c4 (subject of related commit) |
| ------------ |
| |
| * Configure a commit template with some trailers with empty values |
| (using sed to show and keep the trailing spaces at the end of the |
| trailers), then configure a commit-msg hook that uses |
| 'git interpret-trailers' to remove trailers with empty values and |
| to add a 'git-version' trailer: |
| + |
| ------------ |
| $ sed -e 's/ Z$/ /' >commit_template.txt <<EOF |
| > ***subject*** |
| > |
| > ***message*** |
| > |
| > Fixes: Z |
| > Cc: Z |
| > Reviewed-by: Z |
| > Signed-off-by: Z |
| > EOF |
| $ git config commit.template commit_template.txt |
| $ cat >.git/hooks/commit-msg <<EOF |
| > #!/bin/sh |
| > git interpret-trailers --trim-empty --trailer "git-version: \$(git describe)" "\$1" > "\$1.new" |
| > mv "\$1.new" "\$1" |
| > EOF |
| $ chmod +x .git/hooks/commit-msg |
| ------------ |
| |
| SEE ALSO |
| -------- |
| linkgit:git-commit[1], linkgit:git-format-patch[1], linkgit:git-config[1] |
| |
| GIT |
| --- |
| Part of the linkgit:git[1] suite |