| hashmap API |
| =========== |
| |
| The hashmap API is a generic implementation of hash-based key-value mappings. |
| |
| Data Structures |
| --------------- |
| |
| `struct hashmap`:: |
| |
| The hash table structure. Members can be used as follows, but should |
| not be modified directly: |
| + |
| The `size` member keeps track of the total number of entries (0 means the |
| hashmap is empty). |
| + |
| `tablesize` is the allocated size of the hash table. A non-0 value indicates |
| that the hashmap is initialized. It may also be useful for statistical purposes |
| (i.e. `size / tablesize` is the current load factor). |
| + |
| `cmpfn` stores the comparison function specified in `hashmap_init()`. In |
| advanced scenarios, it may be useful to change this, e.g. to switch between |
| case-sensitive and case-insensitive lookup. |
| |
| `struct hashmap_entry`:: |
| |
| An opaque structure representing an entry in the hash table, which must |
| be used as first member of user data structures. Ideally it should be |
| followed by an int-sized member to prevent unused memory on 64-bit |
| systems due to alignment. |
| + |
| The `hash` member is the entry's hash code and the `next` member points to the |
| next entry in case of collisions (i.e. if multiple entries map to the same |
| bucket). |
| |
| `struct hashmap_iter`:: |
| |
| An iterator structure, to be used with hashmap_iter_* functions. |
| |
| Types |
| ----- |
| |
| `int (*hashmap_cmp_fn)(const void *entry, const void *entry_or_key, const void *keydata)`:: |
| |
| User-supplied function to test two hashmap entries for equality. Shall |
| return 0 if the entries are equal. |
| + |
| This function is always called with non-NULL `entry` / `entry_or_key` |
| parameters that have the same hash code. When looking up an entry, the `key` |
| and `keydata` parameters to hashmap_get and hashmap_remove are always passed |
| as second and third argument, respectively. Otherwise, `keydata` is NULL. |
| |
| Functions |
| --------- |
| |
| `unsigned int strhash(const char *buf)`:: |
| `unsigned int strihash(const char *buf)`:: |
| `unsigned int memhash(const void *buf, size_t len)`:: |
| `unsigned int memihash(const void *buf, size_t len)`:: |
| |
| Ready-to-use hash functions for strings, using the FNV-1 algorithm (see |
| http://www.isthe.com/chongo/tech/comp/fnv). |
| + |
| `strhash` and `strihash` take 0-terminated strings, while `memhash` and |
| `memihash` operate on arbitrary-length memory. |
| + |
| `strihash` and `memihash` are case insensitive versions. |
| |
| `unsigned int sha1hash(const unsigned char *sha1)`:: |
| |
| Converts a cryptographic hash (e.g. SHA-1) into an int-sized hash code |
| for use in hash tables. Cryptographic hashes are supposed to have |
| uniform distribution, so in contrast to `memhash()`, this just copies |
| the first `sizeof(int)` bytes without shuffling any bits. Note that |
| the results will be different on big-endian and little-endian |
| platforms, so they should not be stored or transferred over the net. |
| |
| `void hashmap_init(struct hashmap *map, hashmap_cmp_fn equals_function, size_t initial_size)`:: |
| |
| Initializes a hashmap structure. |
| + |
| `map` is the hashmap to initialize. |
| + |
| The `equals_function` can be specified to compare two entries for equality. |
| If NULL, entries are considered equal if their hash codes are equal. |
| + |
| If the total number of entries is known in advance, the `initial_size` |
| parameter may be used to preallocate a sufficiently large table and thus |
| prevent expensive resizing. If 0, the table is dynamically resized. |
| |
| `void hashmap_free(struct hashmap *map, int free_entries)`:: |
| |
| Frees a hashmap structure and allocated memory. |
| + |
| `map` is the hashmap to free. |
| + |
| If `free_entries` is true, each hashmap_entry in the map is freed as well |
| (using stdlib's free()). |
| |
| `void hashmap_entry_init(void *entry, unsigned int hash)`:: |
| |
| Initializes a hashmap_entry structure. |
| + |
| `entry` points to the entry to initialize. |
| + |
| `hash` is the hash code of the entry. |
| + |
| The hashmap_entry structure does not hold references to external resources, |
| and it is safe to just discard it once you are done with it (i.e. if |
| your structure was allocated with xmalloc(), you can just free(3) it, |
| and if it is on stack, you can just let it go out of scope). |
| |
| `void *hashmap_get(const struct hashmap *map, const void *key, const void *keydata)`:: |
| |
| Returns the hashmap entry for the specified key, or NULL if not found. |
| + |
| `map` is the hashmap structure. |
| + |
| `key` is a hashmap_entry structure (or user data structure that starts with |
| hashmap_entry) that has at least been initialized with the proper hash code |
| (via `hashmap_entry_init`). |
| + |
| If an entry with matching hash code is found, `key` and `keydata` are passed |
| to `hashmap_cmp_fn` to decide whether the entry matches the key. |
| |
| `void *hashmap_get_from_hash(const struct hashmap *map, unsigned int hash, const void *keydata)`:: |
| |
| Returns the hashmap entry for the specified hash code and key data, |
| or NULL if not found. |
| + |
| `map` is the hashmap structure. |
| + |
| `hash` is the hash code of the entry to look up. |
| + |
| If an entry with matching hash code is found, `keydata` is passed to |
| `hashmap_cmp_fn` to decide whether the entry matches the key. The |
| `entry_or_key` parameter points to a bogus hashmap_entry structure that |
| should not be used in the comparison. |
| |
| `void *hashmap_get_next(const struct hashmap *map, const void *entry)`:: |
| |
| Returns the next equal hashmap entry, or NULL if not found. This can be |
| used to iterate over duplicate entries (see `hashmap_add`). |
| + |
| `map` is the hashmap structure. |
| + |
| `entry` is the hashmap_entry to start the search from, obtained via a previous |
| call to `hashmap_get` or `hashmap_get_next`. |
| |
| `void hashmap_add(struct hashmap *map, void *entry)`:: |
| |
| Adds a hashmap entry. This allows to add duplicate entries (i.e. |
| separate values with the same key according to hashmap_cmp_fn). |
| + |
| `map` is the hashmap structure. |
| + |
| `entry` is the entry to add. |
| |
| `void *hashmap_put(struct hashmap *map, void *entry)`:: |
| |
| Adds or replaces a hashmap entry. If the hashmap contains duplicate |
| entries equal to the specified entry, only one of them will be replaced. |
| + |
| `map` is the hashmap structure. |
| + |
| `entry` is the entry to add or replace. |
| + |
| Returns the replaced entry, or NULL if not found (i.e. the entry was added). |
| |
| `void *hashmap_remove(struct hashmap *map, const void *key, const void *keydata)`:: |
| |
| Removes a hashmap entry matching the specified key. If the hashmap |
| contains duplicate entries equal to the specified key, only one of |
| them will be removed. |
| + |
| `map` is the hashmap structure. |
| + |
| `key` is a hashmap_entry structure (or user data structure that starts with |
| hashmap_entry) that has at least been initialized with the proper hash code |
| (via `hashmap_entry_init`). |
| + |
| If an entry with matching hash code is found, `key` and `keydata` are |
| passed to `hashmap_cmp_fn` to decide whether the entry matches the key. |
| + |
| Returns the removed entry, or NULL if not found. |
| |
| `void hashmap_iter_init(struct hashmap *map, struct hashmap_iter *iter)`:: |
| `void *hashmap_iter_next(struct hashmap_iter *iter)`:: |
| `void *hashmap_iter_first(struct hashmap *map, struct hashmap_iter *iter)`:: |
| |
| Used to iterate over all entries of a hashmap. |
| + |
| `hashmap_iter_init` initializes a `hashmap_iter` structure. |
| + |
| `hashmap_iter_next` returns the next hashmap_entry, or NULL if there are no |
| more entries. |
| + |
| `hashmap_iter_first` is a combination of both (i.e. initializes the iterator |
| and returns the first entry, if any). |
| |
| `const char *strintern(const char *string)`:: |
| `const void *memintern(const void *data, size_t len)`:: |
| |
| Returns the unique, interned version of the specified string or data, |
| similar to the `String.intern` API in Java and .NET, respectively. |
| Interned strings remain valid for the entire lifetime of the process. |
| + |
| Can be used as `[x]strdup()` or `xmemdupz` replacement, except that interned |
| strings / data must not be modified or freed. |
| + |
| Interned strings are best used for short strings with high probability of |
| duplicates. |
| + |
| Uses a hashmap to store the pool of interned strings. |
| |
| Usage example |
| ------------- |
| |
| Here's a simple usage example that maps long keys to double values. |
| ------------ |
| struct hashmap map; |
| |
| struct long2double { |
| struct hashmap_entry ent; /* must be the first member! */ |
| long key; |
| double value; |
| }; |
| |
| static int long2double_cmp(const struct long2double *e1, const struct long2double *e2, const void *unused) |
| { |
| return !(e1->key == e2->key); |
| } |
| |
| void long2double_init(void) |
| { |
| hashmap_init(&map, (hashmap_cmp_fn) long2double_cmp, 0); |
| } |
| |
| void long2double_free(void) |
| { |
| hashmap_free(&map, 1); |
| } |
| |
| static struct long2double *find_entry(long key) |
| { |
| struct long2double k; |
| hashmap_entry_init(&k, memhash(&key, sizeof(long))); |
| k.key = key; |
| return hashmap_get(&map, &k, NULL); |
| } |
| |
| double get_value(long key) |
| { |
| struct long2double *e = find_entry(key); |
| return e ? e->value : 0; |
| } |
| |
| void set_value(long key, double value) |
| { |
| struct long2double *e = find_entry(key); |
| if (!e) { |
| e = malloc(sizeof(struct long2double)); |
| hashmap_entry_init(e, memhash(&key, sizeof(long))); |
| e->key = key; |
| hashmap_add(&map, e); |
| } |
| e->value = value; |
| } |
| ------------ |
| |
| Using variable-sized keys |
| ------------------------- |
| |
| The `hashmap_entry_get` and `hashmap_entry_remove` functions expect an ordinary |
| `hashmap_entry` structure as key to find the correct entry. If the key data is |
| variable-sized (e.g. a FLEX_ARRAY string) or quite large, it is undesirable |
| to create a full-fledged entry structure on the heap and copy all the key data |
| into the structure. |
| |
| In this case, the `keydata` parameter can be used to pass |
| variable-sized key data directly to the comparison function, and the `key` |
| parameter can be a stripped-down, fixed size entry structure allocated on the |
| stack. |
| |
| See test-hashmap.c for an example using arbitrary-length strings as keys. |