| #!/bin/sh |
| |
| test_description='git cat-file' |
| |
| . ./test-lib.sh |
| |
| echo_without_newline () { |
| printf '%s' "$*" |
| } |
| |
| strlen () { |
| echo_without_newline "$1" | wc -c | sed -e 's/^ *//' |
| } |
| |
| maybe_remove_timestamp () { |
| if test -z "$2"; then |
| echo_without_newline "$1" |
| else |
| echo_without_newline "$(printf '%s\n' "$1" | sed -e 's/ [0-9][0-9]* [-+][0-9][0-9][0-9][0-9]$//')" |
| fi |
| } |
| |
| run_tests () { |
| type=$1 |
| sha1=$2 |
| size=$3 |
| content=$4 |
| pretty_content=$5 |
| no_ts=$6 |
| |
| batch_output="$sha1 $type $size |
| $content" |
| |
| test_expect_success "$type exists" ' |
| git cat-file -e $sha1 |
| ' |
| |
| test_expect_success "Type of $type is correct" ' |
| echo $type >expect && |
| git cat-file -t $sha1 >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success "Size of $type is correct" ' |
| echo $size >expect && |
| git cat-file -s $sha1 >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success "Type of $type is correct using --allow-unknown-type" ' |
| echo $type >expect && |
| git cat-file -t --allow-unknown-type $sha1 >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success "Size of $type is correct using --allow-unknown-type" ' |
| echo $size >expect && |
| git cat-file -s --allow-unknown-type $sha1 >actual && |
| test_cmp expect actual |
| ' |
| |
| test -z "$content" || |
| test_expect_success "Content of $type is correct" ' |
| maybe_remove_timestamp "$content" $no_ts >expect && |
| maybe_remove_timestamp "$(git cat-file $type $sha1)" $no_ts >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success "Pretty content of $type is correct" ' |
| maybe_remove_timestamp "$pretty_content" $no_ts >expect && |
| maybe_remove_timestamp "$(git cat-file -p $sha1)" $no_ts >actual && |
| test_cmp expect actual |
| ' |
| |
| test -z "$content" || |
| test_expect_success "--batch output of $type is correct" ' |
| maybe_remove_timestamp "$batch_output" $no_ts >expect && |
| maybe_remove_timestamp "$(echo $sha1 | git cat-file --batch)" $no_ts >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success "--batch-check output of $type is correct" ' |
| echo "$sha1 $type $size" >expect && |
| echo_without_newline $sha1 | git cat-file --batch-check >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success "custom --batch-check format" ' |
| echo "$type $sha1" >expect && |
| echo $sha1 | git cat-file --batch-check="%(objecttype) %(objectname)" >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success '--batch-check with %(rest)' ' |
| echo "$type this is some extra content" >expect && |
| echo "$sha1 this is some extra content" | |
| git cat-file --batch-check="%(objecttype) %(rest)" >actual && |
| test_cmp expect actual |
| ' |
| |
| test -z "$content" || |
| test_expect_success "--batch without type ($type)" ' |
| { |
| echo "$size" && |
| maybe_remove_timestamp "$content" $no_ts |
| } >expect && |
| echo $sha1 | git cat-file --batch="%(objectsize)" >actual.full && |
| maybe_remove_timestamp "$(cat actual.full)" $no_ts >actual && |
| test_cmp expect actual |
| ' |
| |
| test -z "$content" || |
| test_expect_success "--batch without size ($type)" ' |
| { |
| echo "$type" && |
| maybe_remove_timestamp "$content" $no_ts |
| } >expect && |
| echo $sha1 | git cat-file --batch="%(objecttype)" >actual.full && |
| maybe_remove_timestamp "$(cat actual.full)" $no_ts >actual && |
| test_cmp expect actual |
| ' |
| } |
| |
| hello_content="Hello World" |
| hello_size=$(strlen "$hello_content") |
| hello_sha1=$(echo_without_newline "$hello_content" | git hash-object --stdin) |
| |
| test_expect_success "setup" ' |
| echo_without_newline "$hello_content" > hello && |
| git update-index --add hello |
| ' |
| |
| run_tests 'blob' $hello_sha1 $hello_size "$hello_content" "$hello_content" |
| |
| test_expect_success '--batch-check without %(rest) considers whole line' ' |
| echo "$hello_sha1 blob $hello_size" >expect && |
| git update-index --add --cacheinfo 100644 $hello_sha1 "white space" && |
| test_when_finished "git update-index --remove \"white space\"" && |
| echo ":white space" | git cat-file --batch-check >actual && |
| test_cmp expect actual |
| ' |
| |
| tree_sha1=$(git write-tree) |
| tree_size=33 |
| tree_pretty_content="100644 blob $hello_sha1 hello" |
| |
| run_tests 'tree' $tree_sha1 $tree_size "" "$tree_pretty_content" |
| |
| commit_message="Initial commit" |
| commit_sha1=$(echo_without_newline "$commit_message" | git commit-tree $tree_sha1) |
| commit_size=177 |
| commit_content="tree $tree_sha1 |
| author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> 0000000000 +0000 |
| committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 0000000000 +0000 |
| |
| $commit_message" |
| |
| run_tests 'commit' $commit_sha1 $commit_size "$commit_content" "$commit_content" 1 |
| |
| tag_header_without_timestamp="object $hello_sha1 |
| type blob |
| tag hellotag |
| tagger $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" |
| tag_description="This is a tag" |
| tag_content="$tag_header_without_timestamp 0000000000 +0000 |
| |
| $tag_description" |
| |
| tag_sha1=$(echo_without_newline "$tag_content" | git mktag) |
| tag_size=$(strlen "$tag_content") |
| |
| run_tests 'tag' $tag_sha1 $tag_size "$tag_content" "$tag_content" 1 |
| |
| test_expect_success \ |
| "Reach a blob from a tag pointing to it" \ |
| "test '$hello_content' = \"\$(git cat-file blob $tag_sha1)\"" |
| |
| for batch in batch batch-check |
| do |
| for opt in t s e p |
| do |
| test_expect_success "Passing -$opt with --$batch fails" ' |
| test_must_fail git cat-file --$batch -$opt $hello_sha1 |
| ' |
| |
| test_expect_success "Passing --$batch with -$opt fails" ' |
| test_must_fail git cat-file -$opt --$batch $hello_sha1 |
| ' |
| done |
| |
| test_expect_success "Passing <type> with --$batch fails" ' |
| test_must_fail git cat-file --$batch blob $hello_sha1 |
| ' |
| |
| test_expect_success "Passing --$batch with <type> fails" ' |
| test_must_fail git cat-file blob --$batch $hello_sha1 |
| ' |
| |
| test_expect_success "Passing sha1 with --$batch fails" ' |
| test_must_fail git cat-file --$batch $hello_sha1 |
| ' |
| done |
| |
| for opt in t s e p |
| do |
| test_expect_success "Passing -$opt with --follow-symlinks fails" ' |
| test_must_fail git cat-file --follow-symlinks -$opt $hello_sha1 |
| ' |
| done |
| |
| test_expect_success "--batch-check for a non-existent named object" ' |
| test "foobar42 missing |
| foobar84 missing" = \ |
| "$( ( echo foobar42; echo_without_newline foobar84; ) | git cat-file --batch-check)" |
| ' |
| |
| test_expect_success "--batch-check for a non-existent hash" ' |
| test "0000000000000000000000000000000000000042 missing |
| 0000000000000000000000000000000000000084 missing" = \ |
| "$( ( echo 0000000000000000000000000000000000000042; |
| echo_without_newline 0000000000000000000000000000000000000084; ) \ |
| | git cat-file --batch-check)" |
| ' |
| |
| test_expect_success "--batch for an existent and a non-existent hash" ' |
| test "$tag_sha1 tag $tag_size |
| $tag_content |
| 0000000000000000000000000000000000000000 missing" = \ |
| "$( ( echo $tag_sha1; |
| echo_without_newline 0000000000000000000000000000000000000000; ) \ |
| | git cat-file --batch)" |
| ' |
| |
| test_expect_success "--batch-check for an empty line" ' |
| test " missing" = "$(echo | git cat-file --batch-check)" |
| ' |
| |
| test_expect_success 'empty --batch-check notices missing object' ' |
| echo "$ZERO_OID missing" >expect && |
| echo "$ZERO_OID" | git cat-file --batch-check="" >actual && |
| test_cmp expect actual |
| ' |
| |
| batch_input="$hello_sha1 |
| $commit_sha1 |
| $tag_sha1 |
| deadbeef |
| |
| " |
| |
| batch_output="$hello_sha1 blob $hello_size |
| $hello_content |
| $commit_sha1 commit $commit_size |
| $commit_content |
| $tag_sha1 tag $tag_size |
| $tag_content |
| deadbeef missing |
| missing" |
| |
| test_expect_success '--batch with multiple sha1s gives correct format' ' |
| test "$(maybe_remove_timestamp "$batch_output" 1)" = "$(maybe_remove_timestamp "$(echo_without_newline "$batch_input" | git cat-file --batch)" 1)" |
| ' |
| |
| batch_check_input="$hello_sha1 |
| $tree_sha1 |
| $commit_sha1 |
| $tag_sha1 |
| deadbeef |
| |
| " |
| |
| batch_check_output="$hello_sha1 blob $hello_size |
| $tree_sha1 tree $tree_size |
| $commit_sha1 commit $commit_size |
| $tag_sha1 tag $tag_size |
| deadbeef missing |
| missing" |
| |
| test_expect_success "--batch-check with multiple sha1s gives correct format" ' |
| test "$batch_check_output" = \ |
| "$(echo_without_newline "$batch_check_input" | git cat-file --batch-check)" |
| ' |
| |
| test_expect_success 'setup blobs which are likely to delta' ' |
| test-tool genrandom foo 10240 >foo && |
| { cat foo; echo plus; } >foo-plus && |
| git add foo foo-plus && |
| git commit -m foo && |
| cat >blobs <<-\EOF |
| HEAD:foo |
| HEAD:foo-plus |
| EOF |
| ' |
| |
| test_expect_success 'confirm that neither loose blob is a delta' ' |
| cat >expect <<-EOF && |
| $ZERO_OID |
| $ZERO_OID |
| EOF |
| git cat-file --batch-check="%(deltabase)" <blobs >actual && |
| test_cmp expect actual |
| ' |
| |
| # To avoid relying too much on the current delta heuristics, |
| # we will check only that one of the two objects is a delta |
| # against the other, but not the order. We can do so by just |
| # asking for the base of both, and checking whether either |
| # sha1 appears in the output. |
| test_expect_success '%(deltabase) reports packed delta bases' ' |
| git repack -ad && |
| git cat-file --batch-check="%(deltabase)" <blobs >actual && |
| { |
| grep "$(git rev-parse HEAD:foo)" actual || |
| grep "$(git rev-parse HEAD:foo-plus)" actual |
| } |
| ' |
| |
| bogus_type="bogus" |
| bogus_content="bogus" |
| bogus_size=$(strlen "$bogus_content") |
| bogus_sha1=$(echo_without_newline "$bogus_content" | git hash-object -t $bogus_type --literally -w --stdin) |
| |
| test_expect_success "Type of broken object is correct" ' |
| echo $bogus_type >expect && |
| git cat-file -t --allow-unknown-type $bogus_sha1 >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success "Size of broken object is correct" ' |
| echo $bogus_size >expect && |
| git cat-file -s --allow-unknown-type $bogus_sha1 >actual && |
| test_cmp expect actual |
| ' |
| bogus_type="abcdefghijklmnopqrstuvwxyz1234679" |
| bogus_content="bogus" |
| bogus_size=$(strlen "$bogus_content") |
| bogus_sha1=$(echo_without_newline "$bogus_content" | git hash-object -t $bogus_type --literally -w --stdin) |
| |
| test_expect_success "Type of broken object is correct when type is large" ' |
| echo $bogus_type >expect && |
| git cat-file -t --allow-unknown-type $bogus_sha1 >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success "Size of large broken object is correct when type is large" ' |
| echo $bogus_size >expect && |
| git cat-file -s --allow-unknown-type $bogus_sha1 >actual && |
| test_cmp expect actual |
| ' |
| |
| # Tests for git cat-file --follow-symlinks |
| test_expect_success 'prep for symlink tests' ' |
| echo_without_newline "$hello_content" >morx && |
| test_ln_s_add morx same-dir-link && |
| test_ln_s_add dir link-to-dir && |
| test_ln_s_add ../fleem out-of-repo-link && |
| test_ln_s_add .. out-of-repo-link-dir && |
| test_ln_s_add same-dir-link link-to-link && |
| test_ln_s_add nope broken-same-dir-link && |
| mkdir dir && |
| test_ln_s_add ../morx dir/parent-dir-link && |
| test_ln_s_add .. dir/link-dir && |
| test_ln_s_add ../../escape dir/out-of-repo-link && |
| test_ln_s_add ../.. dir/out-of-repo-link-dir && |
| test_ln_s_add nope dir/broken-link-in-dir && |
| mkdir dir/subdir && |
| test_ln_s_add ../../morx dir/subdir/grandparent-dir-link && |
| test_ln_s_add ../../../great-escape dir/subdir/out-of-repo-link && |
| test_ln_s_add ../../.. dir/subdir/out-of-repo-link-dir && |
| test_ln_s_add ../../../ dir/subdir/out-of-repo-link-dir-trailing && |
| test_ln_s_add ../parent-dir-link dir/subdir/parent-dir-link-to-link && |
| echo_without_newline "$hello_content" >dir/subdir/ind2 && |
| echo_without_newline "$hello_content" >dir/ind1 && |
| test_ln_s_add dir dirlink && |
| test_ln_s_add dir/subdir subdirlink && |
| test_ln_s_add subdir/ind2 dir/link-to-child && |
| test_ln_s_add dir/link-to-child link-to-down-link && |
| test_ln_s_add dir/.. up-down && |
| test_ln_s_add dir/../ up-down-trailing && |
| test_ln_s_add dir/../morx up-down-file && |
| test_ln_s_add dir/../../morx up-up-down-file && |
| test_ln_s_add subdirlink/../../morx up-two-down-file && |
| test_ln_s_add loop1 loop2 && |
| test_ln_s_add loop2 loop1 && |
| git add morx dir/subdir/ind2 dir/ind1 && |
| git commit -am "test" && |
| echo $hello_sha1 blob $hello_size >found |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for non-links' ' |
| echo HEAD:morx | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual && |
| echo HEAD:nope missing >expect && |
| echo HEAD:nope | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for in-repo, same-dir links' ' |
| echo HEAD:same-dir-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for in-repo, links to dirs' ' |
| echo HEAD:link-to-dir/ind1 | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual |
| ' |
| |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for broken in-repo, same-dir links' ' |
| echo dangling 25 >expect && |
| echo HEAD:broken-same-dir-link >>expect && |
| echo HEAD:broken-same-dir-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for same-dir links-to-links' ' |
| echo HEAD:link-to-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for parent-dir links' ' |
| echo HEAD:dir/parent-dir-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual && |
| echo notdir 29 >expect && |
| echo HEAD:dir/parent-dir-link/nope >>expect && |
| echo HEAD:dir/parent-dir-link/nope | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for .. links' ' |
| echo dangling 22 >expect && |
| echo HEAD:dir/link-dir/nope >>expect && |
| echo HEAD:dir/link-dir/nope | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo HEAD:dir/link-dir/morx | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual && |
| echo dangling 27 >expect && |
| echo HEAD:dir/broken-link-in-dir >>expect && |
| echo HEAD:dir/broken-link-in-dir | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for ../.. links' ' |
| echo notdir 41 >expect && |
| echo HEAD:dir/subdir/grandparent-dir-link/nope >>expect && |
| echo HEAD:dir/subdir/grandparent-dir-link/nope | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo HEAD:dir/subdir/grandparent-dir-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual && |
| echo HEAD:dir/subdir/parent-dir-link-to-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for dir/ links' ' |
| echo dangling 17 >expect && |
| echo HEAD:dirlink/morx >>expect && |
| echo HEAD:dirlink/morx | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo $hello_sha1 blob $hello_size >expect && |
| echo HEAD:dirlink/ind1 | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for dir/subdir links' ' |
| echo dangling 20 >expect && |
| echo HEAD:subdirlink/morx >>expect && |
| echo HEAD:subdirlink/morx | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo HEAD:subdirlink/ind2 | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for dir ->subdir links' ' |
| echo notdir 27 >expect && |
| echo HEAD:dir/link-to-child/morx >>expect && |
| echo HEAD:dir/link-to-child/morx | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo HEAD:dir/link-to-child | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual && |
| echo HEAD:link-to-down-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for out-of-repo symlinks' ' |
| echo symlink 8 >expect && |
| echo ../fleem >>expect && |
| echo HEAD:out-of-repo-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo symlink 2 >expect && |
| echo .. >>expect && |
| echo HEAD:out-of-repo-link-dir | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for out-of-repo symlinks in dirs' ' |
| echo symlink 9 >expect && |
| echo ../escape >>expect && |
| echo HEAD:dir/out-of-repo-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo symlink 2 >expect && |
| echo .. >>expect && |
| echo HEAD:dir/out-of-repo-link-dir | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for out-of-repo symlinks in subdirs' ' |
| echo symlink 15 >expect && |
| echo ../great-escape >>expect && |
| echo HEAD:dir/subdir/out-of-repo-link | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo symlink 2 >expect && |
| echo .. >>expect && |
| echo HEAD:dir/subdir/out-of-repo-link-dir | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo symlink 3 >expect && |
| echo ../ >>expect && |
| echo HEAD:dir/subdir/out-of-repo-link-dir-trailing | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlinks works for symlinks with internal ..' ' |
| echo HEAD: | git cat-file --batch-check >expect && |
| echo HEAD:up-down | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo HEAD:up-down-trailing | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo HEAD:up-down-file | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual && |
| echo symlink 7 >expect && |
| echo ../morx >>expect && |
| echo HEAD:up-up-down-file | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual && |
| echo HEAD:up-two-down-file | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp found actual |
| ' |
| |
| test_expect_success 'git cat-file --batch-check --follow-symlink breaks loops' ' |
| echo loop 10 >expect && |
| echo HEAD:loop1 >>expect && |
| echo HEAD:loop1 | git cat-file --batch-check --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'git cat-file --batch --follow-symlink returns correct sha and mode' ' |
| echo HEAD:morx | git cat-file --batch >expect && |
| echo HEAD:morx | git cat-file --batch --follow-symlinks >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'cat-file --batch-all-objects shows all objects' ' |
| # make new repos so we know the full set of objects; we will |
| # also make sure that there are some packed and some loose |
| # objects, some referenced and some not, some duplicates, and that |
| # there are some available only via alternates. |
| git init all-one && |
| ( |
| cd all-one && |
| echo content >file && |
| git add file && |
| git commit -qm base && |
| git rev-parse HEAD HEAD^{tree} HEAD:file && |
| git repack -ad && |
| echo not-cloned | git hash-object -w --stdin |
| ) >expect.unsorted && |
| git clone -s all-one all-two && |
| ( |
| cd all-two && |
| echo local-unref | git hash-object -w --stdin |
| ) >>expect.unsorted && |
| git -C all-two rev-parse HEAD:file | |
| git -C all-two pack-objects .git/objects/pack/pack && |
| sort <expect.unsorted >expect && |
| git -C all-two cat-file --batch-all-objects \ |
| --batch-check="%(objectname)" >actual && |
| test_cmp expect actual |
| ' |
| |
| # The only user-visible difference is that the objects are no longer sorted, |
| # and the resulting sort order is undefined. So we can only check that it |
| # produces the same objects as the ordered case, but that at least exercises |
| # the code. |
| test_expect_success 'cat-file --unordered works' ' |
| git -C all-two cat-file --batch-all-objects --unordered \ |
| --batch-check="%(objectname)" >actual.unsorted && |
| sort <actual.unsorted >actual && |
| test_cmp expect actual |
| ' |
| |
| test_done |