| #!/bin/sh |
| # |
| # Copyright (c) 2005 Junio C Hamano |
| # |
| |
| test_description='Test the very basics part #1. |
| |
| The rest of the test suite does not check the basic operation of git |
| plumbing commands to work very carefully. Their job is to concentrate |
| on tricky features that caused bugs in the past to detect regression. |
| |
| This test runs very basic features, like registering things in cache, |
| writing tree, etc. |
| |
| Note that this test *deliberately* hard-codes many expected object |
| IDs. When object ID computation changes, like in the previous case of |
| swapping compression and hashing order, the person who is making the |
| modification *should* take notice and update the test vectors here. |
| ' |
| |
| . ./test-lib.sh |
| |
| try_local_x () { |
| local x="local" && |
| echo "$x" |
| } |
| |
| # This test is an experiment to check whether any Git users are using |
| # Shells that don't support the "local" keyword. "local" is not |
| # POSIX-standard, but it is very widely supported by POSIX-compliant |
| # shells, and if it doesn't cause problems for people, we would like |
| # to be able to use it in Git code. |
| # |
| # For now, this is the only test that requires "local". If your shell |
| # fails this test, you can ignore the failure, but please report the |
| # problem to the Git mailing list <git@vger.kernel.org>, as it might |
| # convince us to continue avoiding the use of "local". |
| test_expect_success 'verify that the running shell supports "local"' ' |
| x="notlocal" && |
| echo "local" >expected1 && |
| try_local_x >actual1 && |
| test_cmp expected1 actual1 && |
| echo "notlocal" >expected2 && |
| echo "$x" >actual2 && |
| test_cmp expected2 actual2 |
| ' |
| |
| ################################################################ |
| # git init has been done in an empty repository. |
| # make sure it is empty. |
| |
| test_expect_success '.git/objects should be empty after git init in an empty repo' ' |
| find .git/objects -type f -print >should-be-empty && |
| test_line_count = 0 should-be-empty |
| ' |
| |
| # also it should have 2 subdirectories; no fan-out anymore, pack, and info. |
| # 3 is counting "objects" itself |
| test_expect_success '.git/objects should have 3 subdirectories' ' |
| find .git/objects -type d -print >full-of-directories && |
| test_line_count = 3 full-of-directories |
| ' |
| |
| ################################################################ |
| # Test harness |
| test_expect_success 'success is reported like this' ' |
| : |
| ' |
| |
| _run_sub_test_lib_test_common () { |
| neg="$1" name="$2" descr="$3" # stdin is the body of the test code |
| shift 3 |
| mkdir "$name" && |
| ( |
| # Pretend we're not running under a test harness, whether we |
| # are or not. The test-lib output depends on the setting of |
| # this variable, so we need a stable setting under which to run |
| # the sub-test. |
| sane_unset HARNESS_ACTIVE && |
| cd "$name" && |
| cat >"$name.sh" <<-EOF && |
| #!$SHELL_PATH |
| |
| test_description='$descr (run in sub test-lib) |
| |
| This is run in a sub test-lib so that we do not get incorrect |
| passing metrics |
| ' |
| |
| # Point to the t/test-lib.sh, which isn't in ../ as usual |
| . "\$TEST_DIRECTORY"/test-lib.sh |
| EOF |
| cat >>"$name.sh" && |
| chmod +x "$name.sh" && |
| export TEST_DIRECTORY && |
| TEST_OUTPUT_DIRECTORY=$(pwd) && |
| export TEST_OUTPUT_DIRECTORY && |
| if test -z "$neg" |
| then |
| ./"$name.sh" "$@" >out 2>err |
| else |
| ! ./"$name.sh" "$@" >out 2>err |
| fi |
| ) |
| } |
| |
| run_sub_test_lib_test () { |
| _run_sub_test_lib_test_common '' "$@" |
| } |
| |
| run_sub_test_lib_test_err () { |
| _run_sub_test_lib_test_common '!' "$@" |
| } |
| |
| check_sub_test_lib_test () { |
| name="$1" # stdin is the expected output from the test |
| ( |
| cd "$name" && |
| test_must_be_empty err && |
| sed -e 's/^> //' -e 's/Z$//' >expect && |
| test_cmp expect out |
| ) |
| } |
| |
| check_sub_test_lib_test_err () { |
| name="$1" # stdin is the expected output from the test |
| # expected error output is in descriptior 3 |
| ( |
| cd "$name" && |
| sed -e 's/^> //' -e 's/Z$//' >expect.out && |
| test_cmp expect.out out && |
| sed -e 's/^> //' -e 's/Z$//' <&3 >expect.err && |
| test_cmp expect.err err |
| ) |
| } |
| |
| test_expect_success 'pretend we have a fully passing test suite' " |
| run_sub_test_lib_test full-pass '3 passing tests' <<-\\EOF && |
| for i in 1 2 3 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test full-pass <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 - passing test #2 |
| > ok 3 - passing test #3 |
| > # passed all 3 test(s) |
| > 1..3 |
| EOF |
| " |
| |
| test_expect_success 'pretend we have a partially passing test suite' " |
| test_must_fail run_sub_test_lib_test \ |
| partial-pass '2/3 tests passing' <<-\\EOF && |
| test_expect_success 'passing test #1' 'true' |
| test_expect_success 'failing test #2' 'false' |
| test_expect_success 'passing test #3' 'true' |
| test_done |
| EOF |
| check_sub_test_lib_test partial-pass <<-\\EOF |
| > ok 1 - passing test #1 |
| > not ok 2 - failing test #2 |
| # false |
| > ok 3 - passing test #3 |
| > # failed 1 among 3 test(s) |
| > 1..3 |
| EOF |
| " |
| |
| test_expect_success 'pretend we have a known breakage' " |
| run_sub_test_lib_test failing-todo 'A failing TODO test' <<-\\EOF && |
| test_expect_success 'passing test' 'true' |
| test_expect_failure 'pretend we have a known breakage' 'false' |
| test_done |
| EOF |
| check_sub_test_lib_test failing-todo <<-\\EOF |
| > ok 1 - passing test |
| > not ok 2 - pretend we have a known breakage # TODO known breakage |
| > # still have 1 known breakage(s) |
| > # passed all remaining 1 test(s) |
| > 1..2 |
| EOF |
| " |
| |
| test_expect_success 'pretend we have fixed a known breakage' " |
| run_sub_test_lib_test passing-todo 'A passing TODO test' <<-\\EOF && |
| test_expect_failure 'pretend we have fixed a known breakage' 'true' |
| test_done |
| EOF |
| check_sub_test_lib_test passing-todo <<-\\EOF |
| > ok 1 - pretend we have fixed a known breakage # TODO known breakage vanished |
| > # 1 known breakage(s) vanished; please update test(s) |
| > 1..1 |
| EOF |
| " |
| |
| test_expect_success 'pretend we have fixed one of two known breakages (run in sub test-lib)' " |
| run_sub_test_lib_test partially-passing-todos \ |
| '2 TODO tests, one passing' <<-\\EOF && |
| test_expect_failure 'pretend we have a known breakage' 'false' |
| test_expect_success 'pretend we have a passing test' 'true' |
| test_expect_failure 'pretend we have fixed another known breakage' 'true' |
| test_done |
| EOF |
| check_sub_test_lib_test partially-passing-todos <<-\\EOF |
| > not ok 1 - pretend we have a known breakage # TODO known breakage |
| > ok 2 - pretend we have a passing test |
| > ok 3 - pretend we have fixed another known breakage # TODO known breakage vanished |
| > # 1 known breakage(s) vanished; please update test(s) |
| > # still have 1 known breakage(s) |
| > # passed all remaining 1 test(s) |
| > 1..3 |
| EOF |
| " |
| |
| test_expect_success 'pretend we have a pass, fail, and known breakage' " |
| test_must_fail run_sub_test_lib_test \ |
| mixed-results1 'mixed results #1' <<-\\EOF && |
| test_expect_success 'passing test' 'true' |
| test_expect_success 'failing test' 'false' |
| test_expect_failure 'pretend we have a known breakage' 'false' |
| test_done |
| EOF |
| check_sub_test_lib_test mixed-results1 <<-\\EOF |
| > ok 1 - passing test |
| > not ok 2 - failing test |
| > # false |
| > not ok 3 - pretend we have a known breakage # TODO known breakage |
| > # still have 1 known breakage(s) |
| > # failed 1 among remaining 2 test(s) |
| > 1..3 |
| EOF |
| " |
| |
| test_expect_success 'pretend we have a mix of all possible results' " |
| test_must_fail run_sub_test_lib_test \ |
| mixed-results2 'mixed results #2' <<-\\EOF && |
| test_expect_success 'passing test' 'true' |
| test_expect_success 'passing test' 'true' |
| test_expect_success 'passing test' 'true' |
| test_expect_success 'passing test' 'true' |
| test_expect_success 'failing test' 'false' |
| test_expect_success 'failing test' 'false' |
| test_expect_success 'failing test' 'false' |
| test_expect_failure 'pretend we have a known breakage' 'false' |
| test_expect_failure 'pretend we have a known breakage' 'false' |
| test_expect_failure 'pretend we have fixed a known breakage' 'true' |
| test_done |
| EOF |
| check_sub_test_lib_test mixed-results2 <<-\\EOF |
| > ok 1 - passing test |
| > ok 2 - passing test |
| > ok 3 - passing test |
| > ok 4 - passing test |
| > not ok 5 - failing test |
| > # false |
| > not ok 6 - failing test |
| > # false |
| > not ok 7 - failing test |
| > # false |
| > not ok 8 - pretend we have a known breakage # TODO known breakage |
| > not ok 9 - pretend we have a known breakage # TODO known breakage |
| > ok 10 - pretend we have fixed a known breakage # TODO known breakage vanished |
| > # 1 known breakage(s) vanished; please update test(s) |
| > # still have 2 known breakage(s) |
| > # failed 3 among remaining 7 test(s) |
| > 1..10 |
| EOF |
| " |
| |
| test_expect_success 'test --verbose' ' |
| test_must_fail run_sub_test_lib_test \ |
| test-verbose "test verbose" --verbose <<-\EOF && |
| test_expect_success "passing test" true |
| test_expect_success "test with output" "echo foo" |
| test_expect_success "failing test" false |
| test_done |
| EOF |
| mv test-verbose/out test-verbose/out+ && |
| grep -v "^Initialized empty" test-verbose/out+ >test-verbose/out && |
| check_sub_test_lib_test test-verbose <<-\EOF |
| > expecting success: true |
| > ok 1 - passing test |
| > Z |
| > expecting success: echo foo |
| > foo |
| > ok 2 - test with output |
| > Z |
| > expecting success: false |
| > not ok 3 - failing test |
| > # false |
| > Z |
| > # failed 1 among 3 test(s) |
| > 1..3 |
| EOF |
| ' |
| |
| test_expect_success 'test --verbose-only' ' |
| test_must_fail run_sub_test_lib_test \ |
| test-verbose-only-2 "test verbose-only=2" \ |
| --verbose-only=2 <<-\EOF && |
| test_expect_success "passing test" true |
| test_expect_success "test with output" "echo foo" |
| test_expect_success "failing test" false |
| test_done |
| EOF |
| check_sub_test_lib_test test-verbose-only-2 <<-\EOF |
| > ok 1 - passing test |
| > Z |
| > expecting success: echo foo |
| > foo |
| > ok 2 - test with output |
| > Z |
| > not ok 3 - failing test |
| > # false |
| > # failed 1 among 3 test(s) |
| > 1..3 |
| EOF |
| ' |
| |
| test_expect_success 'GIT_SKIP_TESTS' " |
| ( |
| GIT_SKIP_TESTS='git.2' && export GIT_SKIP_TESTS && |
| run_sub_test_lib_test git-skip-tests-basic \ |
| 'GIT_SKIP_TESTS' <<-\\EOF && |
| for i in 1 2 3 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test git-skip-tests-basic <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) |
| > ok 3 - passing test #3 |
| > # passed all 3 test(s) |
| > 1..3 |
| EOF |
| ) |
| " |
| |
| test_expect_success 'GIT_SKIP_TESTS several tests' " |
| ( |
| GIT_SKIP_TESTS='git.2 git.5' && export GIT_SKIP_TESTS && |
| run_sub_test_lib_test git-skip-tests-several \ |
| 'GIT_SKIP_TESTS several tests' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test git-skip-tests-several <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) |
| > ok 3 - passing test #3 |
| > ok 4 - passing test #4 |
| > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) |
| > ok 6 - passing test #6 |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| ) |
| " |
| |
| test_expect_success 'GIT_SKIP_TESTS sh pattern' " |
| ( |
| GIT_SKIP_TESTS='git.[2-5]' && export GIT_SKIP_TESTS && |
| run_sub_test_lib_test git-skip-tests-sh-pattern \ |
| 'GIT_SKIP_TESTS sh pattern' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test git-skip-tests-sh-pattern <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) |
| > ok 3 # skip passing test #3 (GIT_SKIP_TESTS) |
| > ok 4 # skip passing test #4 (GIT_SKIP_TESTS) |
| > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) |
| > ok 6 - passing test #6 |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| ) |
| " |
| |
| test_expect_success '--run basic' " |
| run_sub_test_lib_test run-basic \ |
| '--run basic' --run='1 3 5' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-basic <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 # skip passing test #2 (--run) |
| > ok 3 - passing test #3 |
| > ok 4 # skip passing test #4 (--run) |
| > ok 5 - passing test #5 |
| > ok 6 # skip passing test #6 (--run) |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run with a range' " |
| run_sub_test_lib_test run-range \ |
| '--run with a range' --run='1-3' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-range <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 - passing test #2 |
| > ok 3 - passing test #3 |
| > ok 4 # skip passing test #4 (--run) |
| > ok 5 # skip passing test #5 (--run) |
| > ok 6 # skip passing test #6 (--run) |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run with two ranges' " |
| run_sub_test_lib_test run-two-ranges \ |
| '--run with two ranges' --run='1-2 5-6' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-two-ranges <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 - passing test #2 |
| > ok 3 # skip passing test #3 (--run) |
| > ok 4 # skip passing test #4 (--run) |
| > ok 5 - passing test #5 |
| > ok 6 - passing test #6 |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run with a left open range' " |
| run_sub_test_lib_test run-left-open-range \ |
| '--run with a left open range' --run='-3' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-left-open-range <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 - passing test #2 |
| > ok 3 - passing test #3 |
| > ok 4 # skip passing test #4 (--run) |
| > ok 5 # skip passing test #5 (--run) |
| > ok 6 # skip passing test #6 (--run) |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run with a right open range' " |
| run_sub_test_lib_test run-right-open-range \ |
| '--run with a right open range' --run='4-' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-right-open-range <<-\\EOF |
| > ok 1 # skip passing test #1 (--run) |
| > ok 2 # skip passing test #2 (--run) |
| > ok 3 # skip passing test #3 (--run) |
| > ok 4 - passing test #4 |
| > ok 5 - passing test #5 |
| > ok 6 - passing test #6 |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run with basic negation' " |
| run_sub_test_lib_test run-basic-neg \ |
| '--run with basic negation' --run='"'!3'"' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-basic-neg <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 - passing test #2 |
| > ok 3 # skip passing test #3 (--run) |
| > ok 4 - passing test #4 |
| > ok 5 - passing test #5 |
| > ok 6 - passing test #6 |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run with two negations' " |
| run_sub_test_lib_test run-two-neg \ |
| '--run with two negations' --run='"'!3 !6'"' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-two-neg <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 - passing test #2 |
| > ok 3 # skip passing test #3 (--run) |
| > ok 4 - passing test #4 |
| > ok 5 - passing test #5 |
| > ok 6 # skip passing test #6 (--run) |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run a range and negation' " |
| run_sub_test_lib_test run-range-and-neg \ |
| '--run a range and negation' --run='"'-4 !2'"' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-range-and-neg <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 # skip passing test #2 (--run) |
| > ok 3 - passing test #3 |
| > ok 4 - passing test #4 |
| > ok 5 # skip passing test #5 (--run) |
| > ok 6 # skip passing test #6 (--run) |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run range negation' " |
| run_sub_test_lib_test run-range-neg \ |
| '--run range negation' --run='"'!1-3'"' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-range-neg <<-\\EOF |
| > ok 1 # skip passing test #1 (--run) |
| > ok 2 # skip passing test #2 (--run) |
| > ok 3 # skip passing test #3 (--run) |
| > ok 4 - passing test #4 |
| > ok 5 - passing test #5 |
| > ok 6 - passing test #6 |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run include, exclude and include' " |
| run_sub_test_lib_test run-inc-neg-inc \ |
| '--run include, exclude and include' \ |
| --run='"'1-5 !1-3 2'"' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-inc-neg-inc <<-\\EOF |
| > ok 1 # skip passing test #1 (--run) |
| > ok 2 - passing test #2 |
| > ok 3 # skip passing test #3 (--run) |
| > ok 4 - passing test #4 |
| > ok 5 - passing test #5 |
| > ok 6 # skip passing test #6 (--run) |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run include, exclude and include, comma separated' " |
| run_sub_test_lib_test run-inc-neg-inc-comma \ |
| '--run include, exclude and include, comma separated' \ |
| --run=1-5,\!1-3,2 <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-inc-neg-inc-comma <<-\\EOF |
| > ok 1 # skip passing test #1 (--run) |
| > ok 2 - passing test #2 |
| > ok 3 # skip passing test #3 (--run) |
| > ok 4 - passing test #4 |
| > ok 5 - passing test #5 |
| > ok 6 # skip passing test #6 (--run) |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run exclude and include' " |
| run_sub_test_lib_test run-neg-inc \ |
| '--run exclude and include' \ |
| --run='"'!3- 5'"' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-neg-inc <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 - passing test #2 |
| > ok 3 # skip passing test #3 (--run) |
| > ok 4 # skip passing test #4 (--run) |
| > ok 5 - passing test #5 |
| > ok 6 # skip passing test #6 (--run) |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run empty selectors' " |
| run_sub_test_lib_test run-empty-sel \ |
| '--run empty selectors' \ |
| --run='1,,3,,,5' <<-\\EOF && |
| for i in 1 2 3 4 5 6 |
| do |
| test_expect_success \"passing test #\$i\" 'true' |
| done |
| test_done |
| EOF |
| check_sub_test_lib_test run-empty-sel <<-\\EOF |
| > ok 1 - passing test #1 |
| > ok 2 # skip passing test #2 (--run) |
| > ok 3 - passing test #3 |
| > ok 4 # skip passing test #4 (--run) |
| > ok 5 - passing test #5 |
| > ok 6 # skip passing test #6 (--run) |
| > # passed all 6 test(s) |
| > 1..6 |
| EOF |
| " |
| |
| test_expect_success '--run invalid range start' " |
| run_sub_test_lib_test_err run-inv-range-start \ |
| '--run invalid range start' \ |
| --run='a-5' <<-\\EOF && |
| test_expect_success \"passing test #1\" 'true' |
| test_done |
| EOF |
| check_sub_test_lib_test_err run-inv-range-start \ |
| <<-\\EOF_OUT 3<<-\\EOF_ERR |
| > FATAL: Unexpected exit with code 1 |
| EOF_OUT |
| > error: --run: invalid non-numeric in range start: 'a-5' |
| EOF_ERR |
| " |
| |
| test_expect_success '--run invalid range end' " |
| run_sub_test_lib_test_err run-inv-range-end \ |
| '--run invalid range end' \ |
| --run='1-z' <<-\\EOF && |
| test_expect_success \"passing test #1\" 'true' |
| test_done |
| EOF |
| check_sub_test_lib_test_err run-inv-range-end \ |
| <<-\\EOF_OUT 3<<-\\EOF_ERR |
| > FATAL: Unexpected exit with code 1 |
| EOF_OUT |
| > error: --run: invalid non-numeric in range end: '1-z' |
| EOF_ERR |
| " |
| |
| test_expect_success '--run invalid selector' " |
| run_sub_test_lib_test_err run-inv-selector \ |
| '--run invalid selector' \ |
| --run='1?' <<-\\EOF && |
| test_expect_success \"passing test #1\" 'true' |
| test_done |
| EOF |
| check_sub_test_lib_test_err run-inv-selector \ |
| <<-\\EOF_OUT 3<<-\\EOF_ERR |
| > FATAL: Unexpected exit with code 1 |
| EOF_OUT |
| > error: --run: invalid non-numeric in test selector: '1?' |
| EOF_ERR |
| " |
| |
| |
| test_set_prereq HAVEIT |
| haveit=no |
| test_expect_success HAVEIT 'test runs if prerequisite is satisfied' ' |
| test_have_prereq HAVEIT && |
| haveit=yes |
| ' |
| donthaveit=yes |
| test_expect_success DONTHAVEIT 'unmet prerequisite causes test to be skipped' ' |
| donthaveit=no |
| ' |
| if test $haveit$donthaveit != yesyes |
| then |
| say "bug in test framework: prerequisite tags do not work reliably" |
| exit 1 |
| fi |
| |
| test_set_prereq HAVETHIS |
| haveit=no |
| test_expect_success HAVETHIS,HAVEIT 'test runs if prerequisites are satisfied' ' |
| test_have_prereq HAVEIT && |
| test_have_prereq HAVETHIS && |
| haveit=yes |
| ' |
| donthaveit=yes |
| test_expect_success HAVEIT,DONTHAVEIT 'unmet prerequisites causes test to be skipped' ' |
| donthaveit=no |
| ' |
| donthaveiteither=yes |
| test_expect_success DONTHAVEIT,HAVEIT 'unmet prerequisites causes test to be skipped' ' |
| donthaveiteither=no |
| ' |
| if test $haveit$donthaveit$donthaveiteither != yesyesyes |
| then |
| say "bug in test framework: multiple prerequisite tags do not work reliably" |
| exit 1 |
| fi |
| |
| test_lazy_prereq LAZY_TRUE true |
| havetrue=no |
| test_expect_success LAZY_TRUE 'test runs if lazy prereq is satisfied' ' |
| havetrue=yes |
| ' |
| donthavetrue=yes |
| test_expect_success !LAZY_TRUE 'missing lazy prereqs skip tests' ' |
| donthavetrue=no |
| ' |
| |
| if test "$havetrue$donthavetrue" != yesyes |
| then |
| say 'bug in test framework: lazy prerequisites do not work' |
| exit 1 |
| fi |
| |
| test_lazy_prereq LAZY_FALSE false |
| nothavefalse=no |
| test_expect_success !LAZY_FALSE 'negative lazy prereqs checked' ' |
| nothavefalse=yes |
| ' |
| havefalse=yes |
| test_expect_success LAZY_FALSE 'missing negative lazy prereqs will skip' ' |
| havefalse=no |
| ' |
| |
| if test "$nothavefalse$havefalse" != yesyes |
| then |
| say 'bug in test framework: negative lazy prerequisites do not work' |
| exit 1 |
| fi |
| |
| clean=no |
| test_expect_success 'tests clean up after themselves' ' |
| test_when_finished clean=yes |
| ' |
| |
| if test $clean != yes |
| then |
| say "bug in test framework: basic cleanup command does not work reliably" |
| exit 1 |
| fi |
| |
| test_expect_success 'tests clean up even on failures' " |
| test_must_fail run_sub_test_lib_test \ |
| failing-cleanup 'Failing tests with cleanup commands' <<-\\EOF && |
| test_expect_success 'tests clean up even after a failure' ' |
| touch clean-after-failure && |
| test_when_finished rm clean-after-failure && |
| (exit 1) |
| ' |
| test_expect_success 'failure to clean up causes the test to fail' ' |
| test_when_finished \"(exit 2)\" |
| ' |
| test_done |
| EOF |
| check_sub_test_lib_test failing-cleanup <<-\\EOF |
| > not ok 1 - tests clean up even after a failure |
| > # Z |
| > # touch clean-after-failure && |
| > # test_when_finished rm clean-after-failure && |
| > # (exit 1) |
| > # Z |
| > not ok 2 - failure to clean up causes the test to fail |
| > # Z |
| > # test_when_finished \"(exit 2)\" |
| > # Z |
| > # failed 2 among 2 test(s) |
| > 1..2 |
| EOF |
| " |
| |
| ################################################################ |
| # Basics of the basics |
| |
| # updating a new file without --add should fail. |
| test_expect_success 'git update-index without --add should fail adding' ' |
| test_must_fail git update-index should-be-empty |
| ' |
| |
| # and with --add it should succeed, even if it is empty (it used to fail). |
| test_expect_success 'git update-index with --add should succeed' ' |
| git update-index --add should-be-empty |
| ' |
| |
| test_expect_success 'writing tree out with git write-tree' ' |
| tree=$(git write-tree) |
| ' |
| |
| # we know the shape and contents of the tree and know the object ID for it. |
| test_expect_success SHA1 'validate object ID of a known tree' ' |
| test "$tree" = 7bb943559a305bdd6bdee2cef6e5df2413c3d30a |
| ' |
| |
| # Removing paths. |
| test_expect_success 'git update-index without --remove should fail removing' ' |
| rm -f should-be-empty full-of-directories && |
| test_must_fail git update-index should-be-empty |
| ' |
| |
| test_expect_success 'git update-index with --remove should be able to remove' ' |
| git update-index --remove should-be-empty |
| ' |
| |
| # Empty tree can be written with recent write-tree. |
| test_expect_success 'git write-tree should be able to write an empty tree' ' |
| tree=$(git write-tree) |
| ' |
| |
| test_expect_success 'validate object ID of a known tree' ' |
| test "$tree" = $EMPTY_TREE |
| ' |
| |
| # Various types of objects |
| |
| test_expect_success 'adding various types of objects with git update-index --add' ' |
| mkdir path2 path3 path3/subp3 && |
| paths="path0 path2/file2 path3/file3 path3/subp3/file3" && |
| ( |
| for p in $paths |
| do |
| echo "hello $p" >$p || exit 1 |
| test_ln_s_add "hello $p" ${p}sym || exit 1 |
| done |
| ) && |
| find path* ! -type d -print | xargs git update-index --add |
| ' |
| |
| # Show them and see that matches what we expect. |
| test_expect_success 'showing stage with git ls-files --stage' ' |
| git ls-files --stage >current |
| ' |
| |
| test_expect_success SHA1 'validate git ls-files output for a known tree' ' |
| cat >expected <<-\EOF && |
| 100644 f87290f8eb2cbbea7857214459a0739927eab154 0 path0 |
| 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0 path0sym |
| 100644 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 0 path2/file2 |
| 120000 d8ce161addc5173867a3c3c730924388daedbc38 0 path2/file2sym |
| 100644 0aa34cae68d0878578ad119c86ca2b5ed5b28376 0 path3/file3 |
| 120000 8599103969b43aff7e430efea79ca4636466794f 0 path3/file3sym |
| 100644 00fb5908cb97c2564a9783c0c64087333b3b464f 0 path3/subp3/file3 |
| 120000 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c 0 path3/subp3/file3sym |
| EOF |
| test_cmp expected current |
| ' |
| |
| test_expect_success 'writing tree out with git write-tree' ' |
| tree=$(git write-tree) |
| ' |
| |
| test_expect_success SHA1 'validate object ID for a known tree' ' |
| test "$tree" = 087704a96baf1c2d1c869a8b084481e121c88b5b |
| ' |
| |
| test_expect_success 'showing tree with git ls-tree' ' |
| git ls-tree $tree >current |
| ' |
| |
| test_expect_success SHA1 'git ls-tree output for a known tree' ' |
| cat >expected <<-\EOF && |
| 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 |
| 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym |
| 040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe path2 |
| 040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3 path3 |
| EOF |
| test_cmp expected current |
| ' |
| |
| # This changed in ls-tree pathspec change -- recursive does |
| # not show tree nodes anymore. |
| test_expect_success 'showing tree with git ls-tree -r' ' |
| git ls-tree -r $tree >current |
| ' |
| |
| test_expect_success SHA1 'git ls-tree -r output for a known tree' ' |
| cat >expected <<-\EOF && |
| 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 |
| 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym |
| 100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 path2/file2 |
| 120000 blob d8ce161addc5173867a3c3c730924388daedbc38 path2/file2sym |
| 100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376 path3/file3 |
| 120000 blob 8599103969b43aff7e430efea79ca4636466794f path3/file3sym |
| 100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f path3/subp3/file3 |
| 120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c path3/subp3/file3sym |
| EOF |
| test_cmp expected current |
| ' |
| |
| # But with -r -t we can have both. |
| test_expect_success 'showing tree with git ls-tree -r -t' ' |
| git ls-tree -r -t $tree >current |
| ' |
| |
| test_expect_success SHA1 'git ls-tree -r output for a known tree' ' |
| cat >expected <<-\EOF && |
| 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 |
| 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym |
| 040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe path2 |
| 100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 path2/file2 |
| 120000 blob d8ce161addc5173867a3c3c730924388daedbc38 path2/file2sym |
| 040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3 path3 |
| 100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376 path3/file3 |
| 120000 blob 8599103969b43aff7e430efea79ca4636466794f path3/file3sym |
| 040000 tree 3c5e5399f3a333eddecce7a9b9465b63f65f51e2 path3/subp3 |
| 100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f path3/subp3/file3 |
| 120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c path3/subp3/file3sym |
| EOF |
| test_cmp expected current |
| ' |
| |
| test_expect_success 'writing partial tree out with git write-tree --prefix' ' |
| ptree=$(git write-tree --prefix=path3) |
| ' |
| |
| test_expect_success SHA1 'validate object ID for a known tree' ' |
| test "$ptree" = 21ae8269cacbe57ae09138dcc3a2887f904d02b3 |
| ' |
| |
| test_expect_success 'writing partial tree out with git write-tree --prefix' ' |
| ptree=$(git write-tree --prefix=path3/subp3) |
| ' |
| |
| test_expect_success SHA1 'validate object ID for a known tree' ' |
| test "$ptree" = 3c5e5399f3a333eddecce7a9b9465b63f65f51e2 |
| ' |
| |
| test_expect_success 'put invalid objects into the index' ' |
| rm -f .git/index && |
| cat >badobjects <<-\EOF && |
| 100644 blob 1000000000000000000000000000000000000000 dir/file1 |
| 100644 blob 2000000000000000000000000000000000000000 dir/file2 |
| 100644 blob 3000000000000000000000000000000000000000 dir/file3 |
| 100644 blob 4000000000000000000000000000000000000000 dir/file4 |
| 100644 blob 5000000000000000000000000000000000000000 dir/file5 |
| EOF |
| git update-index --index-info <badobjects |
| ' |
| |
| test_expect_success 'writing this tree without --missing-ok' ' |
| test_must_fail git write-tree |
| ' |
| |
| test_expect_success 'writing this tree with --missing-ok' ' |
| git write-tree --missing-ok |
| ' |
| |
| |
| ################################################################ |
| test_expect_success 'git read-tree followed by write-tree should be idempotent' ' |
| rm -f .git/index && |
| git read-tree $tree && |
| test -f .git/index && |
| newtree=$(git write-tree) && |
| test "$newtree" = "$tree" |
| ' |
| |
| test_expect_success SHA1 'validate git diff-files output for a know cache/work tree state' ' |
| cat >expected <<\EOF && |
| :100644 100644 f87290f8eb2cbbea7857214459a0739927eab154 0000000000000000000000000000000000000000 M path0 |
| :120000 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0000000000000000000000000000000000000000 M path0sym |
| :100644 100644 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 0000000000000000000000000000000000000000 M path2/file2 |
| :120000 120000 d8ce161addc5173867a3c3c730924388daedbc38 0000000000000000000000000000000000000000 M path2/file2sym |
| :100644 100644 0aa34cae68d0878578ad119c86ca2b5ed5b28376 0000000000000000000000000000000000000000 M path3/file3 |
| :120000 120000 8599103969b43aff7e430efea79ca4636466794f 0000000000000000000000000000000000000000 M path3/file3sym |
| :100644 100644 00fb5908cb97c2564a9783c0c64087333b3b464f 0000000000000000000000000000000000000000 M path3/subp3/file3 |
| :120000 120000 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c 0000000000000000000000000000000000000000 M path3/subp3/file3sym |
| EOF |
| git diff-files >current && |
| test_cmp current expected |
| ' |
| |
| test_expect_success 'git update-index --refresh should succeed' ' |
| git update-index --refresh |
| ' |
| |
| test_expect_success 'no diff after checkout and git update-index --refresh' ' |
| git diff-files >current && |
| cmp -s current /dev/null |
| ' |
| |
| ################################################################ |
| P=087704a96baf1c2d1c869a8b084481e121c88b5b |
| |
| test_expect_success SHA1 'git commit-tree records the correct tree in a commit' ' |
| commit0=$(echo NO | git commit-tree $P) && |
| tree=$(git show --pretty=raw $commit0 | |
| sed -n -e "s/^tree //p" -e "/^author /q") && |
| test "z$tree" = "z$P" |
| ' |
| |
| test_expect_success SHA1 'git commit-tree records the correct parent in a commit' ' |
| commit1=$(echo NO | git commit-tree $P -p $commit0) && |
| parent=$(git show --pretty=raw $commit1 | |
| sed -n -e "s/^parent //p" -e "/^author /q") && |
| test "z$commit0" = "z$parent" |
| ' |
| |
| test_expect_success SHA1 'git commit-tree omits duplicated parent in a commit' ' |
| commit2=$(echo NO | git commit-tree $P -p $commit0 -p $commit0) && |
| parent=$(git show --pretty=raw $commit2 | |
| sed -n -e "s/^parent //p" -e "/^author /q" | |
| sort -u) && |
| test "z$commit0" = "z$parent" && |
| numparent=$(git show --pretty=raw $commit2 | |
| sed -n -e "s/^parent //p" -e "/^author /q" | |
| wc -l) && |
| test $numparent = 1 |
| ' |
| |
| test_expect_success 'update-index D/F conflict' ' |
| mv path0 tmp && |
| mv path2 path0 && |
| mv tmp path2 && |
| git update-index --add --replace path2 path0/file2 && |
| numpath0=$(git ls-files path0 | wc -l) && |
| test $numpath0 = 1 |
| ' |
| |
| test_expect_success 'very long name in the index handled sanely' ' |
| |
| a=a && # 1 |
| a=$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a && # 16 |
| a=$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a && # 256 |
| a=$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a$a && # 4096 |
| a=${a}q && |
| |
| >path4 && |
| git update-index --add path4 && |
| ( |
| git ls-files -s path4 | |
| sed -e "s/ .*/ /" | |
| tr -d "\012" && |
| echo "$a" |
| ) | git update-index --index-info && |
| len=$(git ls-files "a*" | wc -c) && |
| test $len = 4098 |
| ' |
| |
| test_done |