| git-repack(1) |
| ============= |
| |
| NAME |
| ---- |
| git-repack - Pack unpacked objects in a repository |
| |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'git repack' [-a] [-A] [-d] [-f] [-F] [-l] [-n] [-q] [-b] [-m] [--window=<n>] [--depth=<n>] [--threads=<n>] [--keep-pack=<pack-name>] [--write-midx] |
| |
| DESCRIPTION |
| ----------- |
| |
| This command is used to combine all objects that do not currently |
| reside in a "pack", into a pack. It can also be used to re-organize |
| existing packs into a single, more efficient pack. |
| |
| A pack is a collection of objects, individually compressed, with |
| delta compression applied, stored in a single file, with an |
| associated index file. |
| |
| Packs are used to reduce the load on mirror systems, backup |
| engines, disk storage, etc. |
| |
| OPTIONS |
| ------- |
| |
| -a:: |
| Instead of incrementally packing the unpacked objects, |
| pack everything referenced into a single pack. |
| Especially useful when packing a repository that is used |
| for private development. Use |
| with `-d`. This will clean up the objects that `git prune` |
| leaves behind, but `git fsck --full --dangling` shows as |
| dangling. |
| + |
| Note that users fetching over dumb protocols will have to fetch the |
| whole new pack in order to get any contained object, no matter how many |
| other objects in that pack they already have locally. |
| + |
| Promisor packfiles are repacked separately: if there are packfiles that |
| have an associated ".promisor" file, these packfiles will be repacked |
| into another separate pack, and an empty ".promisor" file corresponding |
| to the new separate pack will be written. |
| |
| -A:: |
| Same as `-a`, unless `-d` is used. Then any unreachable |
| objects in a previous pack become loose, unpacked objects, |
| instead of being left in the old pack. Unreachable objects |
| are never intentionally added to a pack, even when repacking. |
| This option prevents unreachable objects from being immediately |
| deleted by way of being left in the old pack and then |
| removed. Instead, the loose unreachable objects |
| will be pruned according to normal expiry rules |
| with the next 'git gc' invocation. See linkgit:git-gc[1]. |
| |
| -d:: |
| After packing, if the newly created packs make some |
| existing packs redundant, remove the redundant packs. |
| Also run 'git prune-packed' to remove redundant |
| loose object files. |
| |
| --cruft:: |
| Same as `-a`, unless `-d` is used. Then any unreachable objects |
| are packed into a separate cruft pack. Unreachable objects can |
| be pruned using the normal expiry rules with the next `git gc` |
| invocation (see linkgit:git-gc[1]). Incompatible with `-k`. |
| |
| --cruft-expiration=<approxidate>:: |
| Expire unreachable objects older than `<approxidate>` |
| immediately instead of waiting for the next `git gc` invocation. |
| Only useful with `--cruft -d`. |
| |
| -l:: |
| Pass the `--local` option to 'git pack-objects'. See |
| linkgit:git-pack-objects[1]. |
| |
| -f:: |
| Pass the `--no-reuse-delta` option to `git-pack-objects`, see |
| linkgit:git-pack-objects[1]. |
| |
| -F:: |
| Pass the `--no-reuse-object` option to `git-pack-objects`, see |
| linkgit:git-pack-objects[1]. |
| |
| -q:: |
| --quiet:: |
| Show no progress over the standard error stream and pass the `-q` |
| option to 'git pack-objects'. See linkgit:git-pack-objects[1]. |
| |
| -n:: |
| Do not update the server information with |
| 'git update-server-info'. This option skips |
| updating local catalog files needed to publish |
| this repository (or a direct copy of it) |
| over HTTP or FTP. See linkgit:git-update-server-info[1]. |
| |
| --window=<n>:: |
| --depth=<n>:: |
| These two options affect how the objects contained in the pack are |
| stored using delta compression. The objects are first internally |
| sorted by type, size and optionally names and compared against the |
| other objects within `--window` to see if using delta compression saves |
| space. `--depth` limits the maximum delta depth; making it too deep |
| affects the performance on the unpacker side, because delta data needs |
| to be applied that many times to get to the necessary object. |
| + |
| The default value for --window is 10 and --depth is 50. The maximum |
| depth is 4095. |
| |
| --threads=<n>:: |
| This option is passed through to `git pack-objects`. |
| |
| --window-memory=<n>:: |
| This option provides an additional limit on top of `--window`; |
| the window size will dynamically scale down so as to not take |
| up more than '<n>' bytes in memory. This is useful in |
| repositories with a mix of large and small objects to not run |
| out of memory with a large window, but still be able to take |
| advantage of the large window for the smaller objects. The |
| size can be suffixed with "k", "m", or "g". |
| `--window-memory=0` makes memory usage unlimited. The default |
| is taken from the `pack.windowMemory` configuration variable. |
| Note that the actual memory usage will be the limit multiplied |
| by the number of threads used by linkgit:git-pack-objects[1]. |
| |
| --max-pack-size=<n>:: |
| Maximum size of each output pack file. The size can be suffixed with |
| "k", "m", or "g". The minimum size allowed is limited to 1 MiB. |
| If specified, multiple packfiles may be created, which also |
| prevents the creation of a bitmap index. |
| The default is unlimited, unless the config variable |
| `pack.packSizeLimit` is set. Note that this option may result in |
| a larger and slower repository; see the discussion in |
| `pack.packSizeLimit`. |
| |
| -b:: |
| --write-bitmap-index:: |
| Write a reachability bitmap index as part of the repack. This |
| only makes sense when used with `-a`, `-A` or `-m`, as the bitmaps |
| must be able to refer to all reachable objects. This option |
| overrides the setting of `repack.writeBitmaps`. This option |
| has no effect if multiple packfiles are created, unless writing a |
| MIDX (in which case a multi-pack bitmap is created). |
| |
| --pack-kept-objects:: |
| Include objects in `.keep` files when repacking. Note that we |
| still do not delete `.keep` packs after `pack-objects` finishes. |
| This means that we may duplicate objects, but this makes the |
| option safe to use when there are concurrent pushes or fetches. |
| This option is generally only useful if you are writing bitmaps |
| with `-b` or `repack.writeBitmaps`, as it ensures that the |
| bitmapped packfile has the necessary objects. |
| |
| --keep-pack=<pack-name>:: |
| Exclude the given pack from repacking. This is the equivalent |
| of having `.keep` file on the pack. `<pack-name>` is the |
| pack file name without leading directory (e.g. `pack-123.pack`). |
| The option could be specified multiple times to keep multiple |
| packs. |
| |
| --unpack-unreachable=<when>:: |
| When loosening unreachable objects, do not bother loosening any |
| objects older than `<when>`. This can be used to optimize out |
| the write of any objects that would be immediately pruned by |
| a follow-up `git prune`. |
| |
| -k:: |
| --keep-unreachable:: |
| When used with `-ad`, any unreachable objects from existing |
| packs will be appended to the end of the packfile instead of |
| being removed. In addition, any unreachable loose objects will |
| be packed (and their loose counterparts removed). |
| |
| -i:: |
| --delta-islands:: |
| Pass the `--delta-islands` option to `git-pack-objects`, see |
| linkgit:git-pack-objects[1]. |
| |
| -g=<factor>:: |
| --geometric=<factor>:: |
| Arrange resulting pack structure so that each successive pack |
| contains at least `<factor>` times the number of objects as the |
| next-largest pack. |
| + |
| `git repack` ensures this by determining a "cut" of packfiles that need |
| to be repacked into one in order to ensure a geometric progression. It |
| picks the smallest set of packfiles such that as many of the larger |
| packfiles (by count of objects contained in that pack) may be left |
| intact. |
| + |
| Unlike other repack modes, the set of objects to pack is determined |
| uniquely by the set of packs being "rolled-up"; in other words, the |
| packs determined to need to be combined in order to restore a geometric |
| progression. |
| + |
| When `--unpacked` is specified, loose objects are implicitly included in |
| this "roll-up", without respect to their reachability. This is subject |
| to change in the future. This option (implying a drastically different |
| repack mode) is not guaranteed to work with all other combinations of |
| option to `git repack`. |
| + |
| When writing a multi-pack bitmap, `git repack` selects the largest resulting |
| pack as the preferred pack for object selection by the MIDX (see |
| linkgit:git-multi-pack-index[1]). |
| |
| -m:: |
| --write-midx:: |
| Write a multi-pack index (see linkgit:git-multi-pack-index[1]) |
| containing the non-redundant packs. |
| |
| CONFIGURATION |
| ------------- |
| |
| Various configuration variables affect packing, see |
| linkgit:git-config[1] (search for "pack" and "delta"). |
| |
| By default, the command passes `--delta-base-offset` option to |
| 'git pack-objects'; this typically results in slightly smaller packs, |
| but the generated packs are incompatible with versions of Git older than |
| version 1.4.4. If you need to share your repository with such ancient Git |
| versions, either directly or via the dumb http protocol, then you |
| need to set the configuration variable `repack.UseDeltaBaseOffset` to |
| "false" and repack. Access from old Git versions over the native protocol |
| is unaffected by this option as the conversion is performed on the fly |
| as needed in that case. |
| |
| Delta compression is not used on objects larger than the |
| `core.bigFileThreshold` configuration variable and on files with the |
| attribute `delta` set to false. |
| |
| SEE ALSO |
| -------- |
| linkgit:git-pack-objects[1] |
| linkgit:git-prune-packed[1] |
| |
| GIT |
| --- |
| Part of the linkgit:git[1] suite |