War on whitespace
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff --git a/Documentation/RelNotes-1.5.0.4.txt b/Documentation/RelNotes-1.5.0.4.txt
index b727a8d..feefa5d 100644
--- a/Documentation/RelNotes-1.5.0.4.txt
+++ b/Documentation/RelNotes-1.5.0.4.txt
@@ -20,5 +20,3 @@
* Documentation updates
* User manual updates
-
-
diff --git a/Documentation/RelNotes-1.5.0.5.txt b/Documentation/RelNotes-1.5.0.5.txt
index aa86149..eeec3d7 100644
--- a/Documentation/RelNotes-1.5.0.5.txt
+++ b/Documentation/RelNotes-1.5.0.5.txt
@@ -24,5 +24,3 @@
* Documentation updates
* User manual updates
-
-
diff --git a/Documentation/RelNotes-1.5.0.6.txt b/Documentation/RelNotes-1.5.0.6.txt
index e15447f..c02015a 100644
--- a/Documentation/RelNotes-1.5.0.6.txt
+++ b/Documentation/RelNotes-1.5.0.6.txt
@@ -19,4 +19,3 @@
- user-manual has better cross references.
- gitweb installation/deployment procedure is now documented.
-
diff --git a/Documentation/RelNotes-1.5.1.3.txt b/Documentation/RelNotes-1.5.1.3.txt
index 2ddeabd..876408b 100644
--- a/Documentation/RelNotes-1.5.1.3.txt
+++ b/Documentation/RelNotes-1.5.1.3.txt
@@ -43,4 +43,3 @@
description was given by the caller.
Also contains various documentation updates.
-
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index b9baa1d..01354c2 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -296,15 +296,15 @@
--- a/pico/pico.c
+++ b/pico/pico.c
@@ -219,7 +219,9 @@ PICO *pm;
- switch(pico_all_done){ /* prepare for/handle final events */
- case COMP_EXIT : /* already confirmed */
- packheader();
+ switch(pico_all_done){ /* prepare for/handle final events */
+ case COMP_EXIT : /* already confirmed */
+ packheader();
+#if 0
- stripwhitespace();
+ stripwhitespace();
+#endif
- c |= COMP_EXIT;
- break;
-
+ c |= COMP_EXIT;
+ break;
+
(Daniel Barkalow)
diff --git a/Documentation/asciidoc.conf b/Documentation/asciidoc.conf
index 60e15ba..99302c5 100644
--- a/Documentation/asciidoc.conf
+++ b/Documentation/asciidoc.conf
@@ -54,5 +54,3 @@
[gitlink-inlinemacro]
<a href="{target}.html">{target}{0?({0})}</a>
endif::backend-xhtml11[]
-
-
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 5868d58..de408b6 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -682,5 +682,3 @@
transfer.unpackLimit::
When `fetch.unpackLimit` or `receive.unpackLimit` are
not set, the value of this variable is used instead.
-
-
diff --git a/Documentation/core-tutorial.txt b/Documentation/core-tutorial.txt
index 6b9b9ad..4fb6f41 100644
--- a/Documentation/core-tutorial.txt
+++ b/Documentation/core-tutorial.txt
@@ -9,11 +9,11 @@
often the best way of explaining what is going on.
In normal life, most people wouldn't use the "core" git programs
-directly, but rather script around them to make them more palatable.
+directly, but rather script around them to make them more palatable.
Understanding the core git stuff may help some people get those scripts
done, though, and it may also be instructive in helping people
understand what it is that the higher-level helper scripts are actually
-doing.
+doing.
The core git is often called "plumbing", with the prettier user
interfaces on top of it called "porcelain". You may not want to use the
@@ -41,7 +41,7 @@
out empty, and the only thing you need to do is find yourself a
subdirectory that you want to use as a working tree - either an empty
one for a totally new project, or an existing working tree that you want
-to import into git.
+to import into git.
For our first example, we're going to start a totally new repository from
scratch, with no pre-existing files, and we'll call it `git-tutorial`.
@@ -169,7 +169,7 @@
and see two files:
----------------
-.git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238
+.git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238
.git/objects/f2/4c74a2e500f5ee1332c86b94199f52b1d1d962
----------------
@@ -220,7 +220,7 @@
you've only *told* git about them.
However, since git knows about them, you can now start using some of the
-most basic git commands to manipulate the files or look at their status.
+most basic git commands to manipulate the files or look at their status.
In particular, let's not even check in the two files into git yet, we'll
start off by adding another line to `hello` first:
@@ -350,7 +350,7 @@
Remember how we did the `git-update-index` on file `hello` and then we
changed `hello` afterward, and could compare the new state of `hello` with the
-state we saved in the index file?
+state we saved in the index file?
Further, remember how I said that `git-write-tree` writes the contents
of the *index* file to the tree, and thus what we just committed was in
@@ -370,7 +370,7 @@
between a committed *tree* and either the index file or the working
tree. In other words, `git-diff-index` wants a tree to be diffed
against, and before we did the commit, we couldn't do that, because we
-didn't have anything to diff against.
+didn't have anything to diff against.
But now we can do
@@ -379,7 +379,7 @@
----------------
(where `-p` has the same meaning as it did in `git-diff-files`), and it
-will show us the same difference, but for a totally different reason.
+will show us the same difference, but for a totally different reason.
Now we're comparing the working tree not against the index file,
but against the tree we just wrote. It just so happens that those two
are obviously the same, so we get the same result.
@@ -398,7 +398,7 @@
instead compare against just the index cache contents, and ignore the
current working tree state entirely. Since we just wrote the index
file to HEAD, doing `git-diff-index \--cached -p HEAD` should thus return
-an empty set of differences, and that's exactly what it does.
+an empty set of differences, and that's exactly what it does.
[NOTE]
================
@@ -549,7 +549,7 @@
----------------
and you will see exactly what has changed in the repository over its
-short history.
+short history.
[NOTE]
The `\--root` flag is a flag to `git-diff-tree` to tell it to
@@ -637,7 +637,7 @@
the working tree that it describes" may not be technically 100%
accurate, but it's a good model for all normal use.
-This has two implications:
+This has two implications:
- if you grow bored with the tutorial repository you created (or you've
made a mistake and want to start all over), you can just do simple
@@ -705,7 +705,7 @@
the checked out files or even an index file, and will *only* contain the
actual core git files. Such a repository usually doesn't even have the
`.git` subdirectory, but has all the git files directly in the
-repository.
+repository.
To create your own local live copy of such a "raw" git repository, you'd
first create your own subdirectory for the project, and then copy the
@@ -718,7 +718,7 @@
$ rsync -rL rsync://rsync.kernel.org/pub/scm/git/git.git/ .git
----------------
-followed by
+followed by
----------------
$ git-read-tree HEAD
@@ -738,7 +738,7 @@
`-a` flag means "check out all files" (if you have a stale copy or an
older version of a checked out tree you may also need to add the `-f`
flag first, to tell git-checkout-index to *force* overwriting of any old
-files).
+files).
Again, this can all be simplified with
@@ -751,7 +751,7 @@
which will end up doing all of the above for you.
You have now successfully copied somebody else's (mine) remote
-repository, and checked it out.
+repository, and checked it out.
Creating a new branch
@@ -760,14 +760,14 @@
Branches in git are really nothing more than pointers into the git
object database from within the `.git/refs/` subdirectory, and as we
already discussed, the `HEAD` branch is nothing but a symlink to one of
-these object pointers.
+these object pointers.
You can at any time create a new branch by just picking an arbitrary
point in the project history, and just writing the SHA1 name of that
object into a file under `.git/refs/heads/`. You can use any filename you
want (and indeed, subdirectories), but the convention is that the
"normal" branch is called `master`. That's just a convention, though,
-and nothing enforces it.
+and nothing enforces it.
To show that as an example, let's go back to the git-tutorial repository we
used earlier, and create a branch in it. You do that by simply just
@@ -778,7 +778,7 @@
------------
will create a new branch based at the current `HEAD` position, and switch
-to it.
+to it.
[NOTE]
================================================
@@ -825,7 +825,7 @@
$ git branch <branchname> [startingpoint]
------------
-which will simply _create_ the branch, but will not do anything further.
+which will simply _create_ the branch, but will not do anything further.
You can then later -- once you decide that you want to actually develop
on that branch -- switch to that branch with a regular `git checkout`
with the branchname as the argument.
@@ -884,7 +884,7 @@
will show you graphically both of your branches (that's what the `\--all`
means: normally it will just show you your current `HEAD`) and their
histories. You can also see exactly how they came to be from a common
-source.
+source.
Anyway, let's exit `gitk` (`^Q` or the File menu), and decide that we want
to merge the work we did on the `mybranch` branch into the `master`
@@ -905,8 +905,8 @@
file, which had no differences in the `mybranch` branch), and say:
----------------
- Auto-merging hello
- CONFLICT (content): Merge conflict in hello
+ Auto-merging hello
+ CONFLICT (content): Merge conflict in hello
Automatic merge failed; fix up by hand
----------------
@@ -1387,7 +1387,7 @@
propagation to other publicly visible machines:
------------
-$ git push master.kernel.org:/pub/scm/git/git.git/
+$ git push master.kernel.org:/pub/scm/git/git.git/
------------
diff --git a/Documentation/diff-format.txt b/Documentation/diff-format.txt
index e38a1f1..18d49d2 100644
--- a/Documentation/diff-format.txt
+++ b/Documentation/diff-format.txt
@@ -1,7 +1,7 @@
The output format from "git-diff-index", "git-diff-tree" and
"git-diff-files" are very similar.
-These commands all compare two sets of things; what is
+These commands all compare two sets of things; what is
compared differs:
git-diff-index <tree-ish>::
@@ -139,28 +139,28 @@
--- a/describe.c
+++ b/describe.c
@@@ -98,20 -98,12 +98,20 @@@
- return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1;
+ return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1;
}
-
+
- static void describe(char *arg)
-static void describe(struct commit *cmit, int last_one)
++static void describe(char *arg, int last_one)
{
+ unsigned char sha1[20];
+ struct commit *cmit;
- struct commit_list *list;
- static int initialized = 0;
- struct commit_name *n;
-
+ struct commit_list *list;
+ static int initialized = 0;
+ struct commit_name *n;
+
+ if (get_sha1(arg, sha1) < 0)
+ usage(describe_usage);
+ cmit = lookup_commit_reference(sha1);
+ if (!cmit)
+ usage(describe_usage);
+
- if (!initialized) {
- initialized = 1;
- for_each_ref(get_name);
+ if (!initialized) {
+ initialized = 1;
+ for_each_ref(get_name);
------------
1. It is preceded with a "git diff" header, that looks like
@@ -233,4 +233,3 @@
two unresolved merge parents with the working tree file
(i.e. file1 is stage 2 aka "our version", file2 is stage 3 aka
"their version").
-
diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt
index 1689c74..b2a0593 100644
--- a/Documentation/diff-options.txt
+++ b/Documentation/diff-options.txt
@@ -100,8 +100,8 @@
that matches other criteria, nothing is selected.
--find-copies-harder::
- For performance reasons, by default, -C option finds copies only
- if the original file of the copy was modified in the same
+ For performance reasons, by default, -C option finds copies only
+ if the original file of the copy was modified in the same
changeset. This flag makes the command
inspect unmodified files as candidates for the source of
copy. This is a very expensive operation for large
diff --git a/Documentation/diffcore.txt b/Documentation/diffcore.txt
index 34cd306..c6a983a 100644
--- a/Documentation/diffcore.txt
+++ b/Documentation/diffcore.txt
@@ -71,7 +71,7 @@
is controlled by giving the pathname parameters to the
git-diff-* commands on the command line. The pathspec is used
to limit the world diff operates in. It removes the filepairs
-outside the specified set of pathnames. E.g. If the input set
+outside the specified set of pathnames. E.g. If the input set
of filepairs included:
------------------------------------------------
@@ -269,4 +269,3 @@
*.c
t
------------------------------------------------
-
diff --git a/Documentation/docbook-xsl.css b/Documentation/docbook-xsl.css
index 8821e30..b878b38 100644
--- a/Documentation/docbook-xsl.css
+++ b/Documentation/docbook-xsl.css
@@ -1,286 +1,286 @@
-/*
- CSS stylesheet for XHTML produced by DocBook XSL stylesheets.
- Tested with XSL stylesheets 1.61.2, 1.67.2
-*/
-
-span.strong {
- font-weight: bold;
-}
-
-body blockquote {
- margin-top: .75em;
- line-height: 1.5;
- margin-bottom: .75em;
-}
-
-html body {
- margin: 1em 5% 1em 5%;
- line-height: 1.2;
-}
-
-body div {
- margin: 0;
-}
-
-h1, h2, h3, h4, h5, h6,
-div.toc p b,
-div.list-of-figures p b,
-div.list-of-tables p b,
-div.abstract p.title
-{
- color: #527bbd;
- font-family: tahoma, verdana, sans-serif;
-}
-
-div.toc p:first-child,
-div.list-of-figures p:first-child,
-div.list-of-tables p:first-child,
-div.example p.title
-{
- margin-bottom: 0.2em;
-}
-
-body h1 {
- margin: .0em 0 0 -4%;
- line-height: 1.3;
- border-bottom: 2px solid silver;
-}
-
-body h2 {
- margin: 0.5em 0 0 -4%;
- line-height: 1.3;
- border-bottom: 2px solid silver;
-}
-
-body h3 {
- margin: .8em 0 0 -3%;
- line-height: 1.3;
-}
-
-body h4 {
- margin: .8em 0 0 -3%;
- line-height: 1.3;
-}
-
-body h5 {
- margin: .8em 0 0 -2%;
- line-height: 1.3;
-}
-
-body h6 {
- margin: .8em 0 0 -1%;
- line-height: 1.3;
-}
-
-body hr {
- border: none; /* Broken on IE6 */
-}
-div.footnotes hr {
- border: 1px solid silver;
-}
-
-div.navheader th, div.navheader td, div.navfooter td {
- font-family: sans-serif;
- font-size: 0.9em;
- font-weight: bold;
- color: #527bbd;
-}
-div.navheader img, div.navfooter img {
- border-style: none;
-}
-div.navheader a, div.navfooter a {
- font-weight: normal;
-}
-div.navfooter hr {
- border: 1px solid silver;
-}
-
-body td {
- line-height: 1.2
-}
-
-body th {
- line-height: 1.2;
-}
-
-ol {
- line-height: 1.2;
-}
-
-ul, body dir, body menu {
- line-height: 1.2;
-}
-
-html {
- margin: 0;
- padding: 0;
-}
-
-body h1, body h2, body h3, body h4, body h5, body h6 {
- margin-left: 0
-}
-
-body pre {
- margin: 0.5em 10% 0.5em 1em;
- line-height: 1.0;
- color: navy;
-}
-
-tt.literal, code.literal {
- color: navy;
-}
-
-div.literallayout p {
- padding: 0em;
- margin: 0em;
-}
-
-div.literallayout {
- font-family: monospace;
-# margin: 0.5em 10% 0.5em 1em;
- margin: 0em;
- color: navy;
- border: 1px solid silver;
- background: #f4f4f4;
- padding: 0.5em;
-}
-
-.programlisting, .screen {
- border: 1px solid silver;
- background: #f4f4f4;
- margin: 0.5em 10% 0.5em 0;
- padding: 0.5em 1em;
-}
-
-div.sidebar {
- background: #ffffee;
- margin: 1.0em 10% 0.5em 0;
- padding: 0.5em 1em;
- border: 1px solid silver;
-}
-div.sidebar * { padding: 0; }
-div.sidebar div { margin: 0; }
-div.sidebar p.title {
- font-family: sans-serif;
- margin-top: 0.5em;
- margin-bottom: 0.2em;
-}
-
-div.bibliomixed {
- margin: 0.5em 5% 0.5em 1em;
-}
-
-div.glossary dt {
- font-weight: bold;
-}
-div.glossary dd p {
- margin-top: 0.2em;
-}
-
-dl {
- margin: .8em 0;
- line-height: 1.2;
-}
-
-dt {
- margin-top: 0.5em;
-}
-
-dt span.term {
- font-style: italic;
-}
-
-div.variablelist dd p {
- margin-top: 0;
-}
-
-div.itemizedlist li, div.orderedlist li {
- margin-left: -0.8em;
- margin-top: 0.5em;
-}
-
-ul, ol {
- list-style-position: outside;
-}
-
-div.sidebar ul, div.sidebar ol {
- margin-left: 2.8em;
-}
-
-div.itemizedlist p.title,
-div.orderedlist p.title,
-div.variablelist p.title
-{
- margin-bottom: -0.8em;
-}
-
-div.revhistory table {
- border-collapse: collapse;
- border: none;
-}
-div.revhistory th {
- border: none;
- color: #527bbd;
- font-family: tahoma, verdana, sans-serif;
-}
-div.revhistory td {
- border: 1px solid silver;
-}
-
-/* Keep TOC and index lines close together. */
-div.toc dl, div.toc dt,
-div.list-of-figures dl, div.list-of-figures dt,
-div.list-of-tables dl, div.list-of-tables dt,
-div.indexdiv dl, div.indexdiv dt
-{
- line-height: normal;
- margin-top: 0;
- margin-bottom: 0;
-}
-
-/*
- Table styling does not work because of overriding attributes in
- generated HTML.
-*/
-div.table table,
-div.informaltable table
-{
- margin-left: 0;
- margin-right: 5%;
- margin-bottom: 0.8em;
-}
-div.informaltable table
-{
- margin-top: 0.4em
-}
-div.table thead,
-div.table tfoot,
-div.table tbody,
-div.informaltable thead,
-div.informaltable tfoot,
-div.informaltable tbody
-{
- /* No effect in IE6. */
- border-top: 2px solid #527bbd;
- border-bottom: 2px solid #527bbd;
-}
-div.table thead, div.table tfoot,
-div.informaltable thead, div.informaltable tfoot
-{
- font-weight: bold;
-}
-
-div.mediaobject img {
- border: 1px solid silver;
- margin-bottom: 0.8em;
-}
-div.figure p.title,
-div.table p.title
-{
- margin-top: 1em;
- margin-bottom: 0.4em;
-}
-
-@media print {
- div.navheader, div.navfooter { display: none; }
-}
+/*
+ CSS stylesheet for XHTML produced by DocBook XSL stylesheets.
+ Tested with XSL stylesheets 1.61.2, 1.67.2
+*/
+
+span.strong {
+ font-weight: bold;
+}
+
+body blockquote {
+ margin-top: .75em;
+ line-height: 1.5;
+ margin-bottom: .75em;
+}
+
+html body {
+ margin: 1em 5% 1em 5%;
+ line-height: 1.2;
+}
+
+body div {
+ margin: 0;
+}
+
+h1, h2, h3, h4, h5, h6,
+div.toc p b,
+div.list-of-figures p b,
+div.list-of-tables p b,
+div.abstract p.title
+{
+ color: #527bbd;
+ font-family: tahoma, verdana, sans-serif;
+}
+
+div.toc p:first-child,
+div.list-of-figures p:first-child,
+div.list-of-tables p:first-child,
+div.example p.title
+{
+ margin-bottom: 0.2em;
+}
+
+body h1 {
+ margin: .0em 0 0 -4%;
+ line-height: 1.3;
+ border-bottom: 2px solid silver;
+}
+
+body h2 {
+ margin: 0.5em 0 0 -4%;
+ line-height: 1.3;
+ border-bottom: 2px solid silver;
+}
+
+body h3 {
+ margin: .8em 0 0 -3%;
+ line-height: 1.3;
+}
+
+body h4 {
+ margin: .8em 0 0 -3%;
+ line-height: 1.3;
+}
+
+body h5 {
+ margin: .8em 0 0 -2%;
+ line-height: 1.3;
+}
+
+body h6 {
+ margin: .8em 0 0 -1%;
+ line-height: 1.3;
+}
+
+body hr {
+ border: none; /* Broken on IE6 */
+}
+div.footnotes hr {
+ border: 1px solid silver;
+}
+
+div.navheader th, div.navheader td, div.navfooter td {
+ font-family: sans-serif;
+ font-size: 0.9em;
+ font-weight: bold;
+ color: #527bbd;
+}
+div.navheader img, div.navfooter img {
+ border-style: none;
+}
+div.navheader a, div.navfooter a {
+ font-weight: normal;
+}
+div.navfooter hr {
+ border: 1px solid silver;
+}
+
+body td {
+ line-height: 1.2
+}
+
+body th {
+ line-height: 1.2;
+}
+
+ol {
+ line-height: 1.2;
+}
+
+ul, body dir, body menu {
+ line-height: 1.2;
+}
+
+html {
+ margin: 0;
+ padding: 0;
+}
+
+body h1, body h2, body h3, body h4, body h5, body h6 {
+ margin-left: 0
+}
+
+body pre {
+ margin: 0.5em 10% 0.5em 1em;
+ line-height: 1.0;
+ color: navy;
+}
+
+tt.literal, code.literal {
+ color: navy;
+}
+
+div.literallayout p {
+ padding: 0em;
+ margin: 0em;
+}
+
+div.literallayout {
+ font-family: monospace;
+# margin: 0.5em 10% 0.5em 1em;
+ margin: 0em;
+ color: navy;
+ border: 1px solid silver;
+ background: #f4f4f4;
+ padding: 0.5em;
+}
+
+.programlisting, .screen {
+ border: 1px solid silver;
+ background: #f4f4f4;
+ margin: 0.5em 10% 0.5em 0;
+ padding: 0.5em 1em;
+}
+
+div.sidebar {
+ background: #ffffee;
+ margin: 1.0em 10% 0.5em 0;
+ padding: 0.5em 1em;
+ border: 1px solid silver;
+}
+div.sidebar * { padding: 0; }
+div.sidebar div { margin: 0; }
+div.sidebar p.title {
+ font-family: sans-serif;
+ margin-top: 0.5em;
+ margin-bottom: 0.2em;
+}
+
+div.bibliomixed {
+ margin: 0.5em 5% 0.5em 1em;
+}
+
+div.glossary dt {
+ font-weight: bold;
+}
+div.glossary dd p {
+ margin-top: 0.2em;
+}
+
+dl {
+ margin: .8em 0;
+ line-height: 1.2;
+}
+
+dt {
+ margin-top: 0.5em;
+}
+
+dt span.term {
+ font-style: italic;
+}
+
+div.variablelist dd p {
+ margin-top: 0;
+}
+
+div.itemizedlist li, div.orderedlist li {
+ margin-left: -0.8em;
+ margin-top: 0.5em;
+}
+
+ul, ol {
+ list-style-position: outside;
+}
+
+div.sidebar ul, div.sidebar ol {
+ margin-left: 2.8em;
+}
+
+div.itemizedlist p.title,
+div.orderedlist p.title,
+div.variablelist p.title
+{
+ margin-bottom: -0.8em;
+}
+
+div.revhistory table {
+ border-collapse: collapse;
+ border: none;
+}
+div.revhistory th {
+ border: none;
+ color: #527bbd;
+ font-family: tahoma, verdana, sans-serif;
+}
+div.revhistory td {
+ border: 1px solid silver;
+}
+
+/* Keep TOC and index lines close together. */
+div.toc dl, div.toc dt,
+div.list-of-figures dl, div.list-of-figures dt,
+div.list-of-tables dl, div.list-of-tables dt,
+div.indexdiv dl, div.indexdiv dt
+{
+ line-height: normal;
+ margin-top: 0;
+ margin-bottom: 0;
+}
+
+/*
+ Table styling does not work because of overriding attributes in
+ generated HTML.
+*/
+div.table table,
+div.informaltable table
+{
+ margin-left: 0;
+ margin-right: 5%;
+ margin-bottom: 0.8em;
+}
+div.informaltable table
+{
+ margin-top: 0.4em
+}
+div.table thead,
+div.table tfoot,
+div.table tbody,
+div.informaltable thead,
+div.informaltable tfoot,
+div.informaltable tbody
+{
+ /* No effect in IE6. */
+ border-top: 2px solid #527bbd;
+ border-bottom: 2px solid #527bbd;
+}
+div.table thead, div.table tfoot,
+div.informaltable thead, div.informaltable tfoot
+{
+ font-weight: bold;
+}
+
+div.mediaobject img {
+ border: 1px solid silver;
+ margin-bottom: 0.8em;
+}
+div.figure p.title,
+div.table p.title
+{
+ margin-top: 1em;
+ margin-bottom: 0.4em;
+}
+
+@media print {
+ div.navheader, div.navfooter { display: none; }
+}
diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt
index bdc7332..da03422 100644
--- a/Documentation/fetch-options.txt
+++ b/Documentation/fetch-options.txt
@@ -52,4 +52,3 @@
Deepen the history of a 'shallow' repository created by
`git clone` with `--depth=<depth>` option (see gitlink:git-clone[1])
by the specified number of commits.
-
diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt
index a0c9f68..76d2b05 100644
--- a/Documentation/git-add.txt
+++ b/Documentation/git-add.txt
@@ -228,4 +228,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt
index f3387f5..e4a6b3a 100644
--- a/Documentation/git-am.txt
+++ b/Documentation/git-am.txt
@@ -158,4 +158,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt
index 3bd2c99..f03f661 100644
--- a/Documentation/git-apply.txt
+++ b/Documentation/git-apply.txt
@@ -183,4 +183,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-archimport.txt b/Documentation/git-archimport.txt
index 82cb41d..7091b8d 100644
--- a/Documentation/git-archimport.txt
+++ b/Documentation/git-archimport.txt
@@ -17,26 +17,26 @@
Imports a project from one or more Arch repositories. It will follow branches
and repositories within the namespaces defined by the <archive/branch>
parameters supplied. If it cannot find the remote branch a merge comes from
-it will just import it as a regular commit. If it can find it, it will mark it
-as a merge whenever possible (see discussion below).
+it will just import it as a regular commit. If it can find it, it will mark it
+as a merge whenever possible (see discussion below).
-The script expects you to provide the key roots where it can start the import
-from an 'initial import' or 'tag' type of Arch commit. It will follow and
-import new branches within the provided roots.
+The script expects you to provide the key roots where it can start the import
+from an 'initial import' or 'tag' type of Arch commit. It will follow and
+import new branches within the provided roots.
-It expects to be dealing with one project only. If it sees
-branches that have different roots, it will refuse to run. In that case,
-edit your <archive/branch> parameters to define clearly the scope of the
-import.
+It expects to be dealing with one project only. If it sees
+branches that have different roots, it will refuse to run. In that case,
+edit your <archive/branch> parameters to define clearly the scope of the
+import.
-`git-archimport` uses `tla` extensively in the background to access the
+`git-archimport` uses `tla` extensively in the background to access the
Arch repository.
Make sure you have a recent version of `tla` available in the path. `tla` must
-know about the repositories you pass to `git-archimport`.
+know about the repositories you pass to `git-archimport`.
-For the initial import `git-archimport` expects to find itself in an empty
-directory. To follow the development of a project that uses Arch, rerun
-`git-archimport` with the same parameters as the initial import to perform
+For the initial import `git-archimport` expects to find itself in an empty
+directory. To follow the development of a project that uses Arch, rerun
+`git-archimport` with the same parameters as the initial import to perform
incremental imports.
While git-archimport will try to create sensible branch names for the
@@ -54,15 +54,15 @@
MERGES
------
-Patch merge data from Arch is used to mark merges in git as well. git
+Patch merge data from Arch is used to mark merges in git as well. git
does not care much about tracking patches, and only considers a merge when a
branch incorporates all the commits since the point they forked. The end result
-is that git will have a good idea of how far branches have diverged. So the
+is that git will have a good idea of how far branches have diverged. So the
import process does lose some patch-trading metadata.
-Fortunately, when you try and merge branches imported from Arch,
-git will find a good merge base, and it has a good chance of identifying
-patches that have been traded out-of-sequence between the branches.
+Fortunately, when you try and merge branches imported from Arch,
+git will find a good merge base, and it has a good chance of identifying
+patches that have been traded out-of-sequence between the branches.
OPTIONS
-------
@@ -71,10 +71,10 @@
Display usage.
-v::
- Verbose output.
+ Verbose output.
-T::
- Many tags. Will create a tag for every commit, reflecting the commit
+ Many tags. Will create a tag for every commit, reflecting the commit
name in the Arch repository.
-f::
@@ -104,7 +104,7 @@
<archive/branch>::
- Archive/branch identifier in a format that `tla log` understands.
+ Archive/branch identifier in a format that `tla log` understands.
Author
@@ -118,4 +118,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt
index 5f68ee1..1072fb8 100644
--- a/Documentation/git-bisect.txt
+++ b/Documentation/git-bisect.txt
@@ -8,7 +8,7 @@
SYNOPSIS
--------
-'git bisect' <subcommand> <options>
+'git bisect' <subcommand> <options>
DESCRIPTION
-----------
@@ -200,4 +200,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt
index 8dc5171..8d72bb9 100644
--- a/Documentation/git-branch.txt
+++ b/Documentation/git-branch.txt
@@ -158,4 +158,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt
index 075c0d0..afa095c 100644
--- a/Documentation/git-cat-file.txt
+++ b/Documentation/git-cat-file.txt
@@ -71,4 +71,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt
index ceb5195..856d2af 100644
--- a/Documentation/git-check-attr.txt
+++ b/Documentation/git-check-attr.txt
@@ -34,4 +34,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-checkout-index.txt b/Documentation/git-checkout-index.txt
index 6dd6db0..b1a8ce1 100644
--- a/Documentation/git-checkout-index.txt
+++ b/Documentation/git-checkout-index.txt
@@ -182,4 +182,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt
index 918d8ee..ea26da8 100644
--- a/Documentation/git-checkout.txt
+++ b/Documentation/git-checkout.txt
@@ -215,4 +215,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt
index 68bba98..47b1e8c 100644
--- a/Documentation/git-cherry-pick.txt
+++ b/Documentation/git-cherry-pick.txt
@@ -68,4 +68,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt
index 27b67b8..b62c970 100644
--- a/Documentation/git-cherry.txt
+++ b/Documentation/git-cherry.txt
@@ -64,4 +64,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt
index 644bf12..2461c0e 100644
--- a/Documentation/git-clone.txt
+++ b/Documentation/git-clone.txt
@@ -175,4 +175,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt
index 504a3aa..9586b97 100644
--- a/Documentation/git-commit-tree.txt
+++ b/Documentation/git-commit-tree.txt
@@ -40,7 +40,7 @@
-p <parent commit>::
Each '-p' indicates the id of a parent commit object.
-
+
Commit Information
------------------
@@ -107,4 +107,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt
index 056b147..f2c6717 100644
--- a/Documentation/git-config.txt
+++ b/Documentation/git-config.txt
@@ -291,4 +291,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-convert-objects.txt b/Documentation/git-convert-objects.txt
index b1220c0..9718abf 100644
--- a/Documentation/git-convert-objects.txt
+++ b/Documentation/git-convert-objects.txt
@@ -26,4 +26,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-count-objects.txt b/Documentation/git-count-objects.txt
index 91c8c92..8161411 100644
--- a/Documentation/git-count-objects.txt
+++ b/Documentation/git-count-objects.txt
@@ -35,4 +35,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-cvsexportcommit.txt b/Documentation/git-cvsexportcommit.txt
index da5c242..827711c 100644
--- a/Documentation/git-cvsexportcommit.txt
+++ b/Documentation/git-cvsexportcommit.txt
@@ -14,19 +14,19 @@
DESCRIPTION
-----------
Exports a commit from GIT to a CVS checkout, making it easier
-to merge patches from a git repository into a CVS repository.
+to merge patches from a git repository into a CVS repository.
-Execute it from the root of the CVS working copy. GIT_DIR must be defined.
+Execute it from the root of the CVS working copy. GIT_DIR must be defined.
See examples below.
-It does its best to do the safe thing, it will check that the files are
-unchanged and up to date in the CVS checkout, and it will not autocommit
+It does its best to do the safe thing, it will check that the files are
+unchanged and up to date in the CVS checkout, and it will not autocommit
by default.
Supports file additions, removals, and commits that affect binary files.
If the commit is a merge commit, you must tell git-cvsexportcommit what parent
-should the changeset be done against.
+should the changeset be done against.
OPTIONS
-------
@@ -55,7 +55,7 @@
Force the parent commit, even if it is not a direct parent.
-m::
- Prepend the commit message with the provided prefix.
+ Prepend the commit message with the provided prefix.
Useful for patch series and the like.
-u::
@@ -73,7 +73,7 @@
$ export GIT_DIR=~/project/.git
$ cd ~/project_cvs_checkout
$ git-cvsexportcommit -v <commit-sha1>
-$ cvs commit -F .mgs <files>
+$ cvs commit -F .mgs <files>
------------
Merge pending patches into CVS automatically -- only if you really know what you are doing ::
@@ -95,4 +95,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt
index e0be856..3985e01 100644
--- a/Documentation/git-cvsimport.txt
+++ b/Documentation/git-cvsimport.txt
@@ -37,7 +37,7 @@
-d <CVSROOT>::
The root of the CVS archive. May be local (a simple path) or remote;
- currently, only the :local:, :ext: and :pserver: access methods
+ currently, only the :local:, :ext: and :pserver: access methods
are supported. If not given, git-cvsimport will try to read it
from `CVS/Root`. If no such file exists, it checks for the
`CVSROOT` environment variable.
@@ -67,7 +67,7 @@
-k::
Kill keywords: will extract files with '-kk' from the CVS archive
to avoid noisy changesets. Highly recommended, but off by default
- to preserve compatibility with early imported trees.
+ to preserve compatibility with early imported trees.
-u::
Convert underscores in tag and branch names to dots.
@@ -89,15 +89,15 @@
Instead of calling cvsps, read the provided cvsps output file. Useful
for debugging or when cvsps is being handled outside cvsimport.
--m::
+-m::
Attempt to detect merges based on the commit message. This option
- will enable default regexes that try to capture the name source
- branch name from the commit message.
+ will enable default regexes that try to capture the name source
+ branch name from the commit message.
-M <regex>::
Attempt to detect merges based on the commit message with a custom
regex. It can be used with '-m' to also see the default regexes.
- You must escape forward slashes.
+ You must escape forward slashes.
-S <regex>::
Skip paths matching the regex.
@@ -156,4 +156,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt
index 9ddab71..4b30b18 100644
--- a/Documentation/git-daemon.txt
+++ b/Documentation/git-daemon.txt
@@ -235,4 +235,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt
index dc47b65..ac23e28 100644
--- a/Documentation/git-describe.txt
+++ b/Documentation/git-describe.txt
@@ -124,4 +124,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-diff-files.txt b/Documentation/git-diff-files.txt
index 2e1e29e..d8a0a86 100644
--- a/Documentation/git-diff-files.txt
+++ b/Documentation/git-diff-files.txt
@@ -26,7 +26,7 @@
branch" respectively. With these options, diffs for
merged entries are not shown.
+
-The default is to diff against our branch (-2) and the
+The default is to diff against our branch (-2) and the
cleanly resolved paths. The option -0 can be given to
omit diff output for unmerged entries and just show "Unmerged".
@@ -58,4 +58,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-diff-index.txt b/Documentation/git-diff-index.txt
index 2df581c..7bd262c 100644
--- a/Documentation/git-diff-index.txt
+++ b/Documentation/git-diff-index.txt
@@ -75,7 +75,7 @@
nicer for the case where you just want to check where you are.
So doing a "git-diff-index --cached" is basically very useful when you are
-asking yourself "what have I already marked for being committed, and
+asking yourself "what have I already marked for being committed, and
what's the difference to a previous tree".
Non-cached Mode
@@ -130,4 +130,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-diff-tree.txt b/Documentation/git-diff-tree.txt
index 6e660e2..6b3f74e 100644
--- a/Documentation/git-diff-tree.txt
+++ b/Documentation/git-diff-tree.txt
@@ -166,4 +166,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt
index 044cee9..639b969 100644
--- a/Documentation/git-diff.txt
+++ b/Documentation/git-diff.txt
@@ -138,4 +138,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt
index 8d06775..5eacab0 100644
--- a/Documentation/git-fast-import.txt
+++ b/Documentation/git-fast-import.txt
@@ -908,4 +908,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-fmt-merge-msg.txt b/Documentation/git-fmt-merge-msg.txt
index 4913c25..6affc5b 100644
--- a/Documentation/git-fmt-merge-msg.txt
+++ b/Documentation/git-fmt-merge-msg.txt
@@ -60,4 +60,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt
index 363edb0..647de90 100644
--- a/Documentation/git-format-patch.txt
+++ b/Documentation/git-format-patch.txt
@@ -178,4 +178,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt
index ed6413a..234c22f 100644
--- a/Documentation/git-fsck.txt
+++ b/Documentation/git-fsck.txt
@@ -145,4 +145,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-get-tar-commit-id.txt b/Documentation/git-get-tar-commit-id.txt
index 48805b6..9b5f86f 100644
--- a/Documentation/git-get-tar-commit-id.txt
+++ b/Documentation/git-get-tar-commit-id.txt
@@ -34,4 +34,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt
index c5a5dad..97faaa1 100644
--- a/Documentation/git-grep.txt
+++ b/Documentation/git-grep.txt
@@ -144,4 +144,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt
index 5edc36f..616f196 100644
--- a/Documentation/git-hash-object.txt
+++ b/Documentation/git-hash-object.txt
@@ -18,7 +18,7 @@
object database. Reports its object ID to its standard output.
This is used by "git-cvsimport" to update the index
without modifying files in the work tree. When <type> is not
-specified, it defaults to "blob".
+specified, it defaults to "blob".
OPTIONS
-------
@@ -43,4 +43,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-http-fetch.txt b/Documentation/git-http-fetch.txt
index 4deabc3..45e4845 100644
--- a/Documentation/git-http-fetch.txt
+++ b/Documentation/git-http-fetch.txt
@@ -54,4 +54,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-http-push.txt b/Documentation/git-http-push.txt
index a15cf5b..9afb860 100644
--- a/Documentation/git-http-push.txt
+++ b/Documentation/git-http-push.txt
@@ -52,7 +52,7 @@
A '<ref>' specification can be either a single pattern, or a pair
of such patterns separated by a colon ":" (this means that a ref name
-cannot have a colon in it). A single pattern '<name>' is just a
+cannot have a colon in it). A single pattern '<name>' is just a
shorthand for '<name>:<name>'.
Each pattern pair consists of the source side (before the colon)
diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt
index 2269269..a8a7f6f 100644
--- a/Documentation/git-index-pack.txt
+++ b/Documentation/git-index-pack.txt
@@ -98,4 +98,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt
index 5412135..ab0201a 100644
--- a/Documentation/git-init-db.txt
+++ b/Documentation/git-init-db.txt
@@ -16,4 +16,3 @@
This is a synonym for gitlink:git-init[1]. Please refer to the
documentation of that command.
-
diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt
index 1b64d3a..413ed65 100644
--- a/Documentation/git-init.txt
+++ b/Documentation/git-init.txt
@@ -108,4 +108,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt
index 9df0ab2..cec60ee 100644
--- a/Documentation/git-instaweb.txt
+++ b/Documentation/git-instaweb.txt
@@ -82,4 +82,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-local-fetch.txt b/Documentation/git-local-fetch.txt
index 51389ef..19b5f88 100644
--- a/Documentation/git-local-fetch.txt
+++ b/Documentation/git-local-fetch.txt
@@ -62,4 +62,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt
index 0f353f6..6157edb 100644
--- a/Documentation/git-log.txt
+++ b/Documentation/git-log.txt
@@ -101,4 +101,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt
index a78a9ff..9975945 100644
--- a/Documentation/git-ls-files.txt
+++ b/Documentation/git-ls-files.txt
@@ -180,4 +180,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt
index c254005..93e9a60 100644
--- a/Documentation/git-ls-remote.txt
+++ b/Documentation/git-ls-remote.txt
@@ -70,4 +70,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt
index ad7f1b9..7b78599 100644
--- a/Documentation/git-ls-tree.txt
+++ b/Documentation/git-ls-tree.txt
@@ -92,4 +92,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt
index 1695695..64aa6a1 100644
--- a/Documentation/git-mailinfo.txt
+++ b/Documentation/git-mailinfo.txt
@@ -67,4 +67,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt
index abb0903..c4f4cab 100644
--- a/Documentation/git-mailsplit.txt
+++ b/Documentation/git-mailsplit.txt
@@ -56,4 +56,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt
index 3190aed..6b71880 100644
--- a/Documentation/git-merge-base.txt
+++ b/Documentation/git-merge-base.txt
@@ -40,4 +40,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-merge-index.txt b/Documentation/git-merge-index.txt
index b8ee1ff..17e9f10 100644
--- a/Documentation/git-merge-index.txt
+++ b/Documentation/git-merge-index.txt
@@ -59,7 +59,7 @@
This is modified MM in the branch B. # merge2
This is modified MM in the branch B. # current contents
-or
+or
torvalds@ppc970:~/merge-test> git-merge-index cat AA MM
cat: : No such file or directory
@@ -85,4 +85,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-merge-one-file.txt b/Documentation/git-merge-one-file.txt
index f80ab3b..f35d0e1 100644
--- a/Documentation/git-merge-one-file.txt
+++ b/Documentation/git-merge-one-file.txt
@@ -27,4 +27,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-merge-tree.txt b/Documentation/git-merge-tree.txt
index 35fb4fb..6892fda 100644
--- a/Documentation/git-merge-tree.txt
+++ b/Documentation/git-merge-tree.txt
@@ -34,4 +34,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt
index 912ef29..d285cba 100644
--- a/Documentation/git-merge.txt
+++ b/Documentation/git-merge.txt
@@ -95,7 +95,7 @@
1. the results are updated both in the index file and in your
working tree,
2. index file is written out as a tree,
-3. the tree gets committed, and
+3. the tree gets committed, and
4. the `HEAD` pointer gets advanced.
Because of 2., we require that the original state of the index
diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt
index add01e8..b89c51c 100644
--- a/Documentation/git-mergetool.txt
+++ b/Documentation/git-mergetool.txt
@@ -43,4 +43,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-mktag.txt b/Documentation/git-mktag.txt
index 2860a3d..0ac3be1 100644
--- a/Documentation/git-mktag.txt
+++ b/Documentation/git-mktag.txt
@@ -44,4 +44,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-mktree.txt b/Documentation/git-mktree.txt
index 5f9ee60..638abc7 100644
--- a/Documentation/git-mktree.txt
+++ b/Documentation/git-mktree.txt
@@ -32,4 +32,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt
index 6756b76..2c9cf74 100644
--- a/Documentation/git-mv.txt
+++ b/Documentation/git-mv.txt
@@ -51,4 +51,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-name-rev.txt b/Documentation/git-name-rev.txt
index 9a1645d..91eede1 100644
--- a/Documentation/git-name-rev.txt
+++ b/Documentation/git-name-rev.txt
@@ -76,4 +76,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-p4import.txt b/Documentation/git-p4import.txt
index 714abbe..9967587 100644
--- a/Documentation/git-p4import.txt
+++ b/Documentation/git-p4import.txt
@@ -165,4 +165,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt
index cfe127a..e3549b5 100644
--- a/Documentation/git-pack-objects.txt
+++ b/Documentation/git-pack-objects.txt
@@ -185,4 +185,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-pack-redundant.txt b/Documentation/git-pack-redundant.txt
index 94bbea0..f2ceeba 100644
--- a/Documentation/git-pack-redundant.txt
+++ b/Documentation/git-pack-redundant.txt
@@ -17,7 +17,7 @@
'xargs rm' if you are in the root of the repository.
git-pack-redundant accepts a list of objects on standard input. Any objects
-given will be ignored when checking which packs are required. This makes the
+given will be ignored when checking which packs are required. This makes the
following command useful when wanting to remove packs which contain unreachable
objects.
@@ -55,4 +55,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-patch-id.txt b/Documentation/git-patch-id.txt
index a7e9fd0..ad528a9 100644
--- a/Documentation/git-patch-id.txt
+++ b/Documentation/git-patch-id.txt
@@ -40,4 +40,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-peek-remote.txt b/Documentation/git-peek-remote.txt
index 74f37bd..abc1712 100644
--- a/Documentation/git-peek-remote.txt
+++ b/Documentation/git-peek-remote.txt
@@ -52,4 +52,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-prune-packed.txt b/Documentation/git-prune-packed.txt
index 310033e..3800edb 100644
--- a/Documentation/git-prune-packed.txt
+++ b/Documentation/git-prune-packed.txt
@@ -50,4 +50,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt
index 0b44f30..50ee5bd 100644
--- a/Documentation/git-prune.txt
+++ b/Documentation/git-prune.txt
@@ -58,4 +58,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt
index 94478ed..84693f8 100644
--- a/Documentation/git-pull.txt
+++ b/Documentation/git-pull.txt
@@ -165,4 +165,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt
index e9ad106..366c5db 100644
--- a/Documentation/git-push.txt
+++ b/Documentation/git-push.txt
@@ -110,4 +110,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt
index 296937a..1c3ef4c 100644
--- a/Documentation/git-quiltimport.txt
+++ b/Documentation/git-quiltimport.txt
@@ -58,4 +58,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt
index acb5744..84184d6 100644
--- a/Documentation/git-read-tree.txt
+++ b/Documentation/git-read-tree.txt
@@ -356,4 +356,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt
index 753b275..0c00090 100644
--- a/Documentation/git-rebase.txt
+++ b/Documentation/git-rebase.txt
@@ -237,4 +237,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt
index 1e343bc..f717e1e 100644
--- a/Documentation/git-reflog.txt
+++ b/Documentation/git-reflog.txt
@@ -65,4 +65,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-relink.txt b/Documentation/git-relink.txt
index aca6012..fe631bb 100644
--- a/Documentation/git-relink.txt
+++ b/Documentation/git-relink.txt
@@ -34,4 +34,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt
index 3dde713..ab232c2 100644
--- a/Documentation/git-remote.txt
+++ b/Documentation/git-remote.txt
@@ -128,4 +128,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt
index 2847c9b..c33a512 100644
--- a/Documentation/git-repack.txt
+++ b/Documentation/git-repack.txt
@@ -101,4 +101,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-request-pull.txt b/Documentation/git-request-pull.txt
index 478a5fd..087eeb7 100644
--- a/Documentation/git-request-pull.txt
+++ b/Documentation/git-request-pull.txt
@@ -37,4 +37,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt
index 7757abe..e1cb4ef 100644
--- a/Documentation/git-rev-parse.txt
+++ b/Documentation/git-rev-parse.txt
@@ -286,4 +286,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt
index 8081bba..69db498 100644
--- a/Documentation/git-revert.txt
+++ b/Documentation/git-revert.txt
@@ -56,4 +56,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt
index a65f24a..78f45dc 100644
--- a/Documentation/git-rm.txt
+++ b/Documentation/git-rm.txt
@@ -95,4 +95,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-runstatus.txt b/Documentation/git-runstatus.txt
index 8bb52f4..dee5d0d 100644
--- a/Documentation/git-runstatus.txt
+++ b/Documentation/git-runstatus.txt
@@ -66,4 +66,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
index 7ae39fd..946bd76 100644
--- a/Documentation/git-send-email.txt
+++ b/Documentation/git-send-email.txt
@@ -78,7 +78,7 @@
`localhost` otherwise.
--subject::
- Specify the initial subject of the email thread.
+ Specify the initial subject of the email thread.
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
@@ -137,4 +137,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt
index 2b2abeb..1ea1faa 100644
--- a/Documentation/git-sh-setup.txt
+++ b/Documentation/git-sh-setup.txt
@@ -69,4 +69,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-shell.txt b/Documentation/git-shell.txt
index 228b9f1..48f2d57 100644
--- a/Documentation/git-shell.txt
+++ b/Documentation/git-shell.txt
@@ -32,4 +32,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt
index 15cc6f7..2220ef6 100644
--- a/Documentation/git-shortlog.txt
+++ b/Documentation/git-shortlog.txt
@@ -56,4 +56,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-show-index.txt b/Documentation/git-show-index.txt
index be09b62..764d993 100644
--- a/Documentation/git-show-index.txt
+++ b/Documentation/git-show-index.txt
@@ -32,4 +32,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt
index 34c5caf..a42e121 100644
--- a/Documentation/git-show.txt
+++ b/Documentation/git-show.txt
@@ -84,4 +84,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-ssh-fetch.txt b/Documentation/git-ssh-fetch.txt
index 192b1f1..aaf3db0 100644
--- a/Documentation/git-ssh-fetch.txt
+++ b/Documentation/git-ssh-fetch.txt
@@ -48,4 +48,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-ssh-upload.txt b/Documentation/git-ssh-upload.txt
index a9b7e9f..4796224 100644
--- a/Documentation/git-ssh-upload.txt
+++ b/Documentation/git-ssh-upload.txt
@@ -44,4 +44,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt
index 1fd1af1..6f16eb0 100644
--- a/Documentation/git-status.txt
+++ b/Documentation/git-status.txt
@@ -58,4 +58,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-stripspace.txt b/Documentation/git-stripspace.txt
index 3a03dd0..1306d7b 100644
--- a/Documentation/git-stripspace.txt
+++ b/Documentation/git-stripspace.txt
@@ -30,4 +30,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-svnimport.txt b/Documentation/git-svnimport.txt
index bdae7d8..e97d15e 100644
--- a/Documentation/git-svnimport.txt
+++ b/Documentation/git-svnimport.txt
@@ -174,4 +174,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt
index 7bde73b..2d01d96 100644
--- a/Documentation/git-tar-tree.txt
+++ b/Documentation/git-tar-tree.txt
@@ -90,4 +90,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-unpack-file.txt b/Documentation/git-unpack-file.txt
index 213dc81..20bb6a7 100644
--- a/Documentation/git-unpack-file.txt
+++ b/Documentation/git-unpack-file.txt
@@ -33,4 +33,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-unpack-objects.txt b/Documentation/git-unpack-objects.txt
index b1b3ec9..d529a43 100644
--- a/Documentation/git-unpack-objects.txt
+++ b/Documentation/git-unpack-objects.txt
@@ -52,4 +52,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt
index 6cfbd9a..0a19538 100644
--- a/Documentation/git-update-index.txt
+++ b/Documentation/git-update-index.txt
@@ -56,7 +56,7 @@
--unmerged::
If --refresh finds unmerged changes in the index, the default
- behavior is to error out. This option makes git-update-index
+ behavior is to error out. This option makes git-update-index
continue anyway.
--ignore-missing::
@@ -64,12 +64,12 @@
--cacheinfo <mode> <object> <path>::
Directly insert the specified info into the index.
-
+
--index-info::
Read index information from stdin.
--chmod=(+|-)x::
- Set the execute permissions on the updated files.
+ Set the execute permissions on the updated files.
--assume-unchanged, --no-assume-unchanged::
When these flags are specified, the object name recorded
@@ -126,7 +126,7 @@
<file>::
Files to act on.
Note that files beginning with '.' are discarded. This includes
- `./file` and `dir/./file`. If you don't want this, then use
+ `./file` and `dir/./file`. If you don't want this, then use
cleaner names.
The same applies to directories ending '/' and paths with '//'
@@ -324,4 +324,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-update-server-info.txt b/Documentation/git-update-server-info.txt
index 88a03c7..e7e82a3 100644
--- a/Documentation/git-update-server-info.txt
+++ b/Documentation/git-update-server-info.txt
@@ -55,4 +55,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt
index 9b0de1c..8139423 100644
--- a/Documentation/git-var.txt
+++ b/Documentation/git-var.txt
@@ -62,4 +62,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-verify-pack.txt b/Documentation/git-verify-pack.txt
index 7a6132b..f4c540f 100644
--- a/Documentation/git-verify-pack.txt
+++ b/Documentation/git-verify-pack.txt
@@ -51,4 +51,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-verify-tag.txt b/Documentation/git-verify-tag.txt
index 0f9bdb5..48d17fd 100644
--- a/Documentation/git-verify-tag.txt
+++ b/Documentation/git-verify-tag.txt
@@ -29,4 +29,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-whatchanged.txt b/Documentation/git-whatchanged.txt
index 399bff3..607df48 100644
--- a/Documentation/git-whatchanged.txt
+++ b/Documentation/git-whatchanged.txt
@@ -78,4 +78,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git-write-tree.txt b/Documentation/git-write-tree.txt
index 96d5e07..cb8d6aa 100644
--- a/Documentation/git-write-tree.txt
+++ b/Documentation/git-write-tree.txt
@@ -47,4 +47,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/git.txt b/Documentation/git.txt
index 98860af..ba077c3 100644
--- a/Documentation/git.txt
+++ b/Documentation/git.txt
@@ -428,4 +428,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt
index 48c5894..e9f82b9 100644
--- a/Documentation/gitk.txt
+++ b/Documentation/gitk.txt
@@ -99,4 +99,3 @@
GIT
---
Part of the gitlink:git[7] suite
-
diff --git a/Documentation/howto/rebase-and-edit.txt b/Documentation/howto/rebase-and-edit.txt
index 646c55c..554909f 100644
--- a/Documentation/howto/rebase-and-edit.txt
+++ b/Documentation/howto/rebase-and-edit.txt
@@ -9,16 +9,16 @@
On Sat, 13 Aug 2005, Linus Torvalds wrote:
-> That's correct. Same things apply: you can move a patch over, and create a
-> new one with a modified comment, but basically the _old_ commit will be
+> That's correct. Same things apply: you can move a patch over, and create a
+> new one with a modified comment, but basically the _old_ commit will be
> immutable.
Let me clarify.
You can entirely _drop_ old branches, so commits may be immutable, but
-nothing forces you to keep them. Of course, when you drop a commit, you'll
-always end up dropping all the commits that depended on it, and if you
-actually got somebody else to pull that commit you can't drop it from
+nothing forces you to keep them. Of course, when you drop a commit, you'll
+always end up dropping all the commits that depended on it, and if you
+actually got somebody else to pull that commit you can't drop it from
_their_ repository, but undoing things is not impossible.
For example, let's say that you've made a mess of things: you've committed
@@ -29,7 +29,7 @@
# for reference
git branch broken
- # Reset the main branch to three parents back: this
+ # Reset the main branch to three parents back: this
# effectively undoes the three top commits
git reset HEAD^^^
git checkout -f
@@ -59,7 +59,7 @@
to see that everything looks sensible.
-And then, you can just remove the broken branch if you decide you really
+And then, you can just remove the broken branch if you decide you really
don't want it:
# remove 'broken' branch
@@ -68,8 +68,8 @@
# Prune old objects if you're really really sure
git prune
-And yeah, I'm sure there are other ways of doing this. And as usual, the
-above is totally untested, and I just wrote it down in this email, so if
+And yeah, I'm sure there are other ways of doing this. And as usual, the
+above is totally untested, and I just wrote it down in this email, so if
I've done something wrong, you'll have to figure it out on your own ;)
Linus
@@ -77,5 +77,3 @@
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
-
diff --git a/Documentation/howto/rebase-from-internal-branch.txt b/Documentation/howto/rebase-from-internal-branch.txt
index 3b3a5c2..7a76045 100644
--- a/Documentation/howto/rebase-from-internal-branch.txt
+++ b/Documentation/howto/rebase-from-internal-branch.txt
@@ -14,10 +14,10 @@
> Dear diary, on Sun, Aug 14, 2005 at 09:57:13AM CEST, I got a letter
> where Junio C Hamano <junkio@cox.net> told me that...
>> Linus Torvalds <torvalds@osdl.org> writes:
->>
->> > Junio, maybe you want to talk about how you move patches from your "pu"
+>>
+>> > Junio, maybe you want to talk about how you move patches from your "pu"
>> > branch to the real branches.
->>
+>>
> Actually, wouldn't this be also precisely for what StGIT is intended to?
Exactly my feeling. I was sort of waiting for Catalin to speak
@@ -118,7 +118,7 @@
where *your "master" head
upstream --> #1 --> #2 --> #3
- used \
+ used \
to be \--> #A --> #2' --> #3' --> #B --> #C
*upstream head
@@ -133,7 +133,7 @@
$ git fetch upstream
This leaves the updated upstream head in .git/FETCH_HEAD but
-does not touch your .git/HEAD nor .git/refs/heads/master.
+does not touch your .git/HEAD nor .git/refs/heads/master.
You run "git rebase" now.
$ git rebase FETCH_HEAD master
@@ -161,5 +161,3 @@
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
-
diff --git a/Documentation/howto/rebuild-from-update-hook.txt b/Documentation/howto/rebuild-from-update-hook.txt
index 02621b5..8d55dfb 100644
--- a/Documentation/howto/rebuild-from-update-hook.txt
+++ b/Documentation/howto/rebuild-from-update-hook.txt
@@ -84,4 +84,3 @@
- This is still crude and does not protect against simultaneous
make invocations stomping on each other. I would need to add
some locking mechanism for this.
-
diff --git a/Documentation/howto/revert-branch-rebase.txt b/Documentation/howto/revert-branch-rebase.txt
index d88ec23..865a666 100644
--- a/Documentation/howto/revert-branch-rebase.txt
+++ b/Documentation/howto/revert-branch-rebase.txt
@@ -146,7 +146,7 @@
nor tag anymore, so remove them:
------------------------------------------------
-$ rm -f .git/refs/tags/pu-anchor
+$ rm -f .git/refs/tags/pu-anchor
$ git branch -d revert-c99
------------------------------------------------
diff --git a/Documentation/howto/separating-topic-branches.txt b/Documentation/howto/separating-topic-branches.txt
index 090e2c9..0d73b31 100644
--- a/Documentation/howto/separating-topic-branches.txt
+++ b/Documentation/howto/separating-topic-branches.txt
@@ -12,7 +12,7 @@
"master"
o---o
- \ "topic"
+ \ "topic"
o---o---o---o---o---o
At this point, "topic" contains something I know I want, but it
@@ -29,11 +29,11 @@
$ git checkout -b topicA master
... pick and apply pieces from P.diff to build
... commits on topicA branch.
-
+
o---o---o
/ "topicA"
o---o"master"
- \ "topic"
+ \ "topic"
o---o---o---o---o---o
Before doing each commit on "topicA" HEAD, I run "diff HEAD"
@@ -59,7 +59,7 @@
/o---o---o
|/ "topicA"
o---o"master"
- \ "topic"
+ \ "topic"
o---o---o---o---o---o
After I am done, I'd try a pretend-merge between "topicA" and
@@ -73,7 +73,7 @@
/o---o---o----------'
|/ "topicA"
o---o"master"
- \ "topic"
+ \ "topic"
o---o---o---o---o---o
The last diff better not to show anything other than cleanups
@@ -84,8 +84,7 @@
"topicB"
o---o---o---o---o
- /
+ /
/o---o---o
|/ "topicA"
o---o"master"
-
diff --git a/Documentation/howto/use-git-daemon.txt b/Documentation/howto/use-git-daemon.txt
index 1a1eb24..4e2f75c 100644
--- a/Documentation/howto/use-git-daemon.txt
+++ b/Documentation/howto/use-git-daemon.txt
@@ -49,4 +49,3 @@
$ git ls-remote git://127.0.0.1/rule-the-world.git
If this does not work, find out why, and submit a patch to this document.
-
diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt
index 56f1d8d..d64c259 100644
--- a/Documentation/merge-options.txt
+++ b/Documentation/merge-options.txt
@@ -25,4 +25,3 @@
If there is no `-s` option, a built-in list of strategies
is used instead (`git-merge-recursive` when merging a single
head, `git-merge-octopus` otherwise).
-
diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt
index d922e8e..c551ea6 100644
--- a/Documentation/pretty-formats.txt
+++ b/Documentation/pretty-formats.txt
@@ -121,4 +121,3 @@
- '%Creset': reset color
- '%m': left, right or boundary mark
- '%n': newline
-
diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt
index 7d515be..6338def 100644
--- a/Documentation/pretty-options.txt
+++ b/Documentation/pretty-options.txt
@@ -11,4 +11,3 @@
command to re-code the commit log message in the encoding
preferred by the user. For non plumbing commands this
defaults to UTF-8.
-
diff --git a/Documentation/pull-fetch-param.txt b/Documentation/pull-fetch-param.txt
index 8d4e950..b6eb7fc 100644
--- a/Documentation/pull-fetch-param.txt
+++ b/Documentation/pull-fetch-param.txt
@@ -58,7 +58,7 @@
+
Some short-cut notations are also supported.
+
-* `tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`;
+* `tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`;
it requests fetching everything up to the given tag.
* A parameter <ref> without a colon is equivalent to
<ref>: when pulling/fetching, so it merges <ref> into the current
diff --git a/Documentation/repository-layout.txt b/Documentation/repository-layout.txt
index 15221b5..4c92e37 100644
--- a/Documentation/repository-layout.txt
+++ b/Documentation/repository-layout.txt
@@ -177,4 +177,3 @@
This is similar to `info/grafts` but is internally used
and maintained by shallow clone mechanism. See `--depth`
option to gitlink:git-clone[1] and gitlink:git-fetch[1].
-
diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt
index 9ce3c47..e5b31c8 100644
--- a/Documentation/technical/pack-format.txt
+++ b/Documentation/technical/pack-format.txt
@@ -80,7 +80,7 @@
+--------------------------------+ |
main | offset | |
index | object name 00XXXXXXXXXXXXXXXX | |
-table +--------------------------------+ |
+table +--------------------------------+ |
| offset | |
| object name 00XXXXXXXXXXXXXXXX | |
+--------------------------------+ |
@@ -97,14 +97,14 @@
| +--------------------------------+
| | idxfile checksum |
| +--------------------------------+
- .-------.
+ .-------.
|
Pack file entry: <+
packed object header:
1-byte size extension bit (MSB)
type (next 3 bit)
- size0 (lower 4-bit)
+ size0 (lower 4-bit)
n-byte sizeN (as long as MSB is set, each 7-bit)
size0..sizeN form 4+7+7+..+7 bit integer, size0
is the least significant part, and sizeN is the
@@ -114,5 +114,5 @@
is the size before compression).
If it is DELTA, then
20-byte base object name SHA1 (the size above is the
- size of the delta data that follows).
+ size of the delta data that follows).
delta data, deflated.
diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt
index 7eaafa8..957cd00 100644
--- a/Documentation/user-manual.txt
+++ b/Documentation/user-manual.txt
@@ -154,11 +154,11 @@
Date: Sat Dec 2 22:22:25 2006 -0800
[XFRM]: Fix aevent structuring to be more complete.
-
+
aevents can not uniquely identify an SA. We break the ABI with this
patch, but consensus is that since it is not yet utilized by any
(known) application then it is fine (better do it now than later).
-
+
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
@@ -167,7 +167,7 @@
--- a/Documentation/networking/xfrm_sync.txt
+++ b/Documentation/networking/xfrm_sync.txt
@@ -47,10 +47,13 @@ aevent_id structure looks like:
-
+
struct xfrm_aevent_id {
struct xfrm_usersa_id sa_id;
+ xfrm_address_t saddr;
@@ -1056,7 +1056,7 @@
-------------------------------------------------
As a special shortcut,
-
+
-------------------------------------------------
$ git commit -a
-------------------------------------------------
@@ -1554,7 +1554,7 @@
Fortunately, git also keeps a log, called a "reflog", of all the
previous values of each branch. So in this case you can still find the
-old history using, for example,
+old history using, for example,
-------------------------------------------------
$ git log master@{1}
@@ -1630,7 +1630,7 @@
reference pointing to it, for example, a new branch:
------------------------------------------------
-$ git branch recovered-branch 7281251ddd
+$ git branch recovered-branch 7281251ddd
------------------------------------------------
Other types of dangling objects (blobs and trees) are also possible, and
@@ -1793,7 +1793,7 @@
you push
your personal repo ------------------> your public repo
- ^ |
+ ^ |
| |
| you pull | they pull
| |
@@ -2359,7 +2359,7 @@
\ \
a--b--c--m <-- mywork
................................................
-
+
However, if you prefer to keep the history in mywork a simple series of
commits without any merges, you may instead choose to use
gitlink:git-rebase[1]:
@@ -2735,7 +2735,7 @@
root objects together into one project by creating a commit object which
has two or more separate roots as its ultimate parents, that's probably
just going to confuse people. So aim for the notion of "one root object
-per project", even if git itself does not enforce that.
+per project", even if git itself does not enforce that.
A <<def_tag_object,"tag" object>> symbolically identifies and can be
used to sign other objects. It contains the identifier and type of
@@ -2757,7 +2757,7 @@
be validated by verifying that (a) their hashes match the content of the
file and (b) the object successfully inflates to a stream of bytes that
forms a sequence of <ascii type without space> + <space> + <ascii decimal
-size> + <byte\0> + <binary object data>.
+size> + <byte\0> + <binary object data>.
The structured objects can further have their structure and
connectivity to other objects verified. This is generally done with
@@ -2954,7 +2954,7 @@
known tree object, or update/compare it with a live tree that is being
developed. If you blow the directory cache away entirely, you generally
haven't lost any information as long as you have the name of the tree
-that it described.
+that it described.
At the same time, the index is at the same time also the
staging area for creating new trees, and creating a new tree always
@@ -2974,7 +2974,7 @@
work *purely* on the index file (showing the current state of the
index), but most operations move data to and from the index file. Either
from the database or from the working directory. Thus there are four
-main combinations:
+main combinations:
[[working-directory-to-index]]
working directory -> index
@@ -3437,7 +3437,7 @@
leaving _some_ of the new objects in the object database, but just
dangling and useless.
-Anyway, once you are sure that you're not interested in any dangling
+Anyway, once you are sure that you're not interested in any dangling
state, you can just prune all unreachable objects:
------------------------------------------------
@@ -3448,12 +3448,12 @@
repository - it's kind of like doing a filesystem fsck recovery: you
don't want to do that while the filesystem is mounted.
-(The same is true of "git-fsck" itself, btw - but since
-git-fsck never actually *changes* the repository, it just reports
-on what it found, git-fsck itself is never "dangerous" to run.
-Running it while somebody is actually changing the repository can cause
-confusing and scary messages, but it won't actually do anything bad. In
-contrast, running "git prune" while somebody is actively changing the
+(The same is true of "git-fsck" itself, btw - but since
+git-fsck never actually *changes* the repository, it just reports
+on what it found, git-fsck itself is never "dangerous" to run.
+Running it while somebody is actually changing the repository can cause
+confusing and scary messages, but it won't actually do anything bad. In
+contrast, running "git prune" while somebody is actively changing the
repository is a *BAD* idea).
[[birdview-on-the-source-code]]
diff --git a/GIT-VERSION-GEN b/GIT-VERSION-GEN
index 06c360b..289c806 100755
--- a/GIT-VERSION-GEN
+++ b/GIT-VERSION-GEN
@@ -43,5 +43,3 @@
echo >&2 "GIT_VERSION = $VN"
echo "GIT_VERSION = $VN" >$GVF
}
-
-
diff --git a/INSTALL b/INSTALL
index 361c65b..95269cc 100644
--- a/INSTALL
+++ b/INSTALL
@@ -31,7 +31,7 @@
interactive tools. None of the core git stuff needs the wrapper,
it's just a convenient shorthand and while it is documented in some
places, you can always replace "git commit" with "git-commit"
- instead.
+ instead.
But let's face it, most of us don't have GNU interactive tools, and
even if we had it, we wouldn't know what it does. I don't think it
@@ -111,4 +111,3 @@
would instead give you a copy of what you see at:
http://www.kernel.org/pub/software/scm/git/docs/
-
diff --git a/arm/sha1.c b/arm/sha1.c
index 11b1a04..9e3ae03 100644
--- a/arm/sha1.c
+++ b/arm/sha1.c
@@ -49,7 +49,7 @@
void SHA1_Final(unsigned char *hash, SHA_CTX *c)
{
uint64_t bitlen;
- uint32_t bitlen_hi, bitlen_lo;
+ uint32_t bitlen_hi, bitlen_lo;
unsigned int i, offset, padlen;
unsigned char bits[8];
static const unsigned char padding[64] = { 0x80, };
@@ -69,7 +69,7 @@
bits[5] = bitlen_lo >> 16;
bits[6] = bitlen_lo >> 8;
bits[7] = bitlen_lo;
- SHA1_Update(c, bits, 8);
+ SHA1_Update(c, bits, 8);
for (i = 0; i < 5; i++) {
uint32_t v = c->hash[i];
diff --git a/arm/sha1_arm.S b/arm/sha1_arm.S
index a328b73..8c1cb99 100644
--- a/arm/sha1_arm.S
+++ b/arm/sha1_arm.S
@@ -181,4 +181,3 @@
.L_sha_K:
.word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
-
diff --git a/builtin-annotate.c b/builtin-annotate.c
index 9db7cfe..fc43eed 100644
--- a/builtin-annotate.c
+++ b/builtin-annotate.c
@@ -22,4 +22,3 @@
return cmd_blame(argc + 1, nargv, prefix);
}
-
diff --git a/builtin-diff-index.c b/builtin-diff-index.c
index d90eba9..81e7167 100644
--- a/builtin-diff-index.c
+++ b/builtin-diff-index.c
@@ -23,7 +23,7 @@
argc = setup_revisions(argc, argv, &rev, NULL);
for (i = 1; i < argc; i++) {
const char *arg = argv[i];
-
+
if (!strcmp(arg, "--cached"))
cached = 1;
else
diff --git a/builtin-fmt-merge-msg.c b/builtin-fmt-merge-msg.c
index 5c145d2..ae60fcc 100644
--- a/builtin-fmt-merge-msg.c
+++ b/builtin-fmt-merge-msg.c
@@ -357,4 +357,3 @@
return 0;
}
-
diff --git a/builtin-fsck.c b/builtin-fsck.c
index bacae5d..944a496 100644
--- a/builtin-fsck.c
+++ b/builtin-fsck.c
@@ -351,7 +351,7 @@
if (!commit->parents && show_root)
printf("root %s\n", sha1_to_hex(commit->object.sha1));
if (!commit->date)
- printf("bad commit date in %s\n",
+ printf("bad commit date in %s\n",
sha1_to_hex(commit->object.sha1));
return 0;
}
@@ -719,7 +719,7 @@
heads = 0;
for (i = 1; i < argc; i++) {
- const char *arg = argv[i];
+ const char *arg = argv[i];
if (*arg == '-')
continue;
diff --git a/builtin-ls-files.c b/builtin-ls-files.c
index f7c066b..5398a41 100644
--- a/builtin-ls-files.c
+++ b/builtin-ls-files.c
@@ -117,7 +117,7 @@
if (0 <= pos)
continue; /* exact match */
pos = -pos - 1;
- if (pos < active_nr) {
+ if (pos < active_nr) {
ce = active_cache[pos];
if (ce_namelen(ce) == len &&
!memcmp(ce->name, ent->name, len))
diff --git a/builtin-name-rev.c b/builtin-name-rev.c
index d3c42ed..61eba34 100644
--- a/builtin-name-rev.c
+++ b/builtin-name-rev.c
@@ -290,4 +290,3 @@
return 0;
}
-
diff --git a/builtin-pack-objects.c b/builtin-pack-objects.c
index 8b9740c..3d396ca 100644
--- a/builtin-pack-objects.c
+++ b/builtin-pack-objects.c
@@ -252,7 +252,7 @@
delta_buf = diff_delta(otherbuf, othersize,
buf, size, &delta_size, 0);
if (!delta_buf || delta_size != entry->delta_size)
- die("delta size changed");
+ die("delta size changed");
free(buf);
free(otherbuf);
return delta_buf;
diff --git a/builtin-rerere.c b/builtin-rerere.c
index 8c2c8bd..f6409b9 100644
--- a/builtin-rerere.c
+++ b/builtin-rerere.c
@@ -434,4 +434,3 @@
path_list_clear(&merge_rr, 1);
return 0;
}
-
diff --git a/builtin-shortlog.c b/builtin-shortlog.c
index 8d3f742..16af619 100644
--- a/builtin-shortlog.c
+++ b/builtin-shortlog.c
@@ -331,4 +331,3 @@
return 0;
}
-
diff --git a/cache.h b/cache.h
index 8a9d1f3..5e7381e 100644
--- a/cache.h
+++ b/cache.h
@@ -479,7 +479,7 @@
extern void reprepare_packed_git(void);
extern void install_packed_git(struct packed_git *pack);
-extern struct packed_git *find_sha1_pack(const unsigned char *sha1,
+extern struct packed_git *find_sha1_pack(const unsigned char *sha1,
struct packed_git *packs);
extern void pack_report(void);
diff --git a/commit.c b/commit.c
index 5632e32..57b69ca 100644
--- a/commit.c
+++ b/commit.c
@@ -148,7 +148,7 @@
int register_commit_graft(struct commit_graft *graft, int ignore_dups)
{
int pos = commit_graft_pos(graft->sha1);
-
+
if (0 <= pos) {
if (ignore_dups)
free(graft);
@@ -406,7 +406,7 @@
return commit_list_insert(item, pp);
}
-
+
void sort_by_date(struct commit_list **list)
{
struct commit_list *ret = NULL;
@@ -1160,7 +1160,7 @@
next = next->next;
count++;
}
-
+
if (!count)
return;
/* allocate an array to help sort the list */
@@ -1188,11 +1188,11 @@
}
next=next->next;
}
- /*
+ /*
* find the tips
*
- * tips are nodes not reachable from any other node in the list
- *
+ * tips are nodes not reachable from any other node in the list
+ *
* the tips serve as a starting set for the work queue.
*/
next=*list;
@@ -1220,7 +1220,7 @@
if (pn) {
/*
- * parents are only enqueued for emission
+ * parents are only enqueued for emission
* when all their children have been emitted thereby
* guaranteeing topological order.
*/
diff --git a/commit.h b/commit.h
index 86e8dca..75b43a5 100644
--- a/commit.h
+++ b/commit.h
@@ -66,7 +66,7 @@
/** Removes the first commit from a list sorted by date, and adds all
* of its parents.
**/
-struct commit *pop_most_recent_commit(struct commit_list **list,
+struct commit *pop_most_recent_commit(struct commit_list **list,
unsigned int mark);
struct commit *pop_commit(struct commit_list **stack);
diff --git a/compat/mmap.c b/compat/mmap.c
index 4cfaee3..c9d46d1 100644
--- a/compat/mmap.c
+++ b/compat/mmap.c
@@ -40,4 +40,3 @@
free(start);
return 0;
}
-
diff --git a/config.c b/config.c
index 0614c2b..58d3ed5 100644
--- a/config.c
+++ b/config.c
@@ -621,7 +621,7 @@
size_t equal_offset = size, bracket_offset = size;
ssize_t offset;
- for (offset = offset_-2; offset > 0
+ for (offset = offset_-2; offset > 0
&& contents[offset] != '\n'; offset--)
switch (contents[offset]) {
case '=': equal_offset = offset; break;
@@ -989,4 +989,3 @@
free(config_filename);
return ret;
}
-
diff --git a/config.mak.in b/config.mak.in
index eb9d7a5..a3032e3 100644
--- a/config.mak.in
+++ b/config.mak.in
@@ -38,4 +38,3 @@
NO_STRLCPY=@NO_STRLCPY@
NO_SETENV=@NO_SETENV@
NO_ICONV=@NO_ICONV@
-
diff --git a/connect.c b/connect.c
index 8cbda88..7fab9c0 100644
--- a/connect.c
+++ b/connect.c
@@ -390,7 +390,7 @@
}
if (0 <= matchlen) {
/* core.gitproxy = none for kernel.org */
- if (matchlen == 4 &&
+ if (matchlen == 4 &&
!memcmp(value, "none", 4))
matchlen = 0;
git_proxy_command = xmalloc(matchlen + 1);
diff --git a/contrib/README b/contrib/README
index e1c0a01..05f291c 100644
--- a/contrib/README
+++ b/contrib/README
@@ -41,4 +41,3 @@
stuff there.
-jc
-
diff --git a/contrib/blameview/README b/contrib/blameview/README
index 50a6f67..fada5ce 100644
--- a/contrib/blameview/README
+++ b/contrib/blameview/README
@@ -7,4 +7,3 @@
Cc: git@vger.kernel.org
Date: Sat, 27 Jan 2007 18:52:38 -0500
Message-ID: <20070127235238.GA28706@coredump.intra.peff.net>
-
diff --git a/contrib/gitview/gitview b/contrib/gitview/gitview
index 2d80e2b..3dc1ef5 100755
--- a/contrib/gitview/gitview
+++ b/contrib/gitview/gitview
@@ -1277,5 +1277,3 @@
view = GitView( without_diff != 1)
view.run(sys.argv[without_diff:])
-
-
diff --git a/contrib/hooks/post-receive-email b/contrib/hooks/post-receive-email
index d1bef91..c589a39 100644
--- a/contrib/hooks/post-receive-email
+++ b/contrib/hooks/post-receive-email
@@ -199,7 +199,7 @@
hooks/post-receive
- --
+ --
$projectdesc
EOF
}
diff --git a/contrib/remotes2config.sh b/contrib/remotes2config.sh
index dc09eae..0c8b954 100644
--- a/contrib/remotes2config.sh
+++ b/contrib/remotes2config.sh
@@ -31,5 +31,3 @@
esac
done
fi
-
-
diff --git a/convert-objects.c b/convert-objects.c
index cefbceb..90e7900 100644
--- a/convert-objects.c
+++ b/convert-objects.c
@@ -194,7 +194,7 @@
fmt++;
} while (*buf && *fmt);
printf("left: %s\n", buf);
- return mktime(&tm);
+ return mktime(&tm);
}
static int convert_date_line(char *dst, void **buf, unsigned long *sp)
diff --git a/copy.c b/copy.c
index d340bb2..c225d1b 100644
--- a/copy.c
+++ b/copy.c
@@ -34,4 +34,3 @@
close(ifd);
return 0;
}
-
diff --git a/ctype.c b/ctype.c
index 56bdffa..ee06eb7 100644
--- a/ctype.c
+++ b/ctype.c
@@ -20,4 +20,3 @@
AA, AA, AA, AA, AA, AA, AA, AA, AA, AA, AA, 0, 0, 0, 0, 0, /* 112-15 */
/* Nothing in the 128.. range */
};
-
diff --git a/daemon.c b/daemon.c
index 674e30d..7779250 100644
--- a/daemon.c
+++ b/daemon.c
@@ -133,7 +133,7 @@
{
int sl, ndot;
- /*
+ /*
* This resurrects the belts and suspenders paranoia check by HPA
* done in <435560F7.4080006@zytor.com> thread, now enter_repo()
* does not do getcwd() based path canonicalizations.
@@ -247,7 +247,7 @@
int pathlen = strlen(path);
/* The validation is done on the paths after enter_repo
- * appends optional {.git,.git/.git} and friends, but
+ * appends optional {.git,.git/.git} and friends, but
* it does not use getcwd(). So if your /pub is
* a symlink to /mnt/pub, you can whitelist /pub and
* do not have to say /mnt/pub.
diff --git a/date.c b/date.c
index 4690371..316841e 100644
--- a/date.c
+++ b/date.c
@@ -403,7 +403,7 @@
}
/*
- * We've seen a digit. Time? Year? Date?
+ * We've seen a digit. Time? Year? Date?
*/
static int match_digit(const char *date, struct tm *tm, int *offset, int *tm_gmt)
{
@@ -495,7 +495,7 @@
} else if (num > 0 && num < 13) {
tm->tm_mon = num-1;
}
-
+
return n;
}
@@ -569,13 +569,13 @@
if (!match) {
/* BAD CRAP */
match = 1;
- }
+ }
date += match;
}
/* mktime uses local timezone */
- then = my_mktime(&tm);
+ then = my_mktime(&tm);
if (offset == -1)
offset = (then - mktime(&tm)) / 60;
@@ -691,7 +691,7 @@
{ "days", 24*60*60 },
{ "weeks", 7*24*60*60 },
{ NULL }
-};
+};
static const char *approxidate_alpha(const char *date, struct tm *tm, int *num)
{
diff --git a/diff-lib.c b/diff-lib.c
index 07f4e81..7fb19c7 100644
--- a/diff-lib.c
+++ b/diff-lib.c
@@ -664,7 +664,7 @@
const char *tree_name;
int match_missing = 0;
- /*
+ /*
* Backward compatibility wart - "diff-index -m" does
* not mean "do not ignore merges", but totally different.
*/
diff --git a/diff.c b/diff.c
index c57ac33..cafa7de 100644
--- a/diff.c
+++ b/diff.c
@@ -3031,7 +3031,7 @@
* entries to the diff-core. They will be prefixed
* with something like '=' or '*' (I haven't decided
* which but should not make any difference).
- * Feeding the same new and old to diff_change()
+ * Feeding the same new and old to diff_change()
* also has the same effect.
* Before the final output happens, they are pruned after
* merged into rename/copy pairs as appropriate.
@@ -3058,7 +3058,7 @@
unsigned old_mode, unsigned new_mode,
const unsigned char *old_sha1,
const unsigned char *new_sha1,
- const char *base, const char *path)
+ const char *base, const char *path)
{
char concatpath[PATH_MAX];
struct diff_filespec *one, *two;
diff --git a/diffcore-pickaxe.c b/diffcore-pickaxe.c
index c4a77d7..af9fffe 100644
--- a/diffcore-pickaxe.c
+++ b/diffcore-pickaxe.c
@@ -102,7 +102,7 @@
for (i = 0; i < q->nr; i++)
diff_free_filepair(q->queue[i]);
}
- else
+ else
/* Showing only the filepairs that has the needle */
for (i = 0; i < q->nr; i++) {
struct diff_filepair *p = q->queue[i];
diff --git a/entry.c b/entry.c
index ae64764..c540ae1 100644
--- a/entry.c
+++ b/entry.c
@@ -31,7 +31,7 @@
struct dirent *de;
char pathbuf[PATH_MAX];
char *name;
-
+
if (!dir)
die("cannot opendir %s (%s)", path, strerror(errno));
strcpy(pathbuf, path);
diff --git a/environment.c b/environment.c
index 9d3e5eb..8b9b89d 100644
--- a/environment.c
+++ b/environment.c
@@ -105,5 +105,3 @@
setup_git_env();
return git_graft_file;
}
-
-
diff --git a/fetch-pack.c b/fetch-pack.c
index aa59043..9c81305 100644
--- a/fetch-pack.c
+++ b/fetch-pack.c
@@ -114,7 +114,7 @@
commit->object.flags |= POPPED;
if (!(commit->object.flags & COMMON))
non_common_revs--;
-
+
parents = commit->parents;
if (commit->object.flags & COMMON) {
diff --git a/fetch.c b/fetch.c
index 8e29d31..dda33e5 100644
--- a/fetch.c
+++ b/fetch.c
@@ -15,7 +15,7 @@
int get_recover = 0;
static unsigned char current_commit_sha1[20];
-void pull_say(const char *fmt, const char *hex)
+void pull_say(const char *fmt, const char *hex)
{
if (get_verbosely)
fprintf(stderr, fmt, hex);
@@ -153,7 +153,7 @@
return 0;
prefetch(obj->sha1);
}
-
+
object_list_insert(obj, process_queue_end);
process_queue_end = &(*process_queue_end)->next;
return 0;
diff --git a/git-archimport.perl b/git-archimport.perl
index c1e7c1d..b210772 100755
--- a/git-archimport.perl
+++ b/git-archimport.perl
@@ -3,19 +3,19 @@
# This tool is copyright (c) 2005, Martin Langhoff.
# It is released under the Gnu Public License, version 2.
#
-# The basic idea is to walk the output of tla abrowse,
-# fetch the changesets and apply them.
+# The basic idea is to walk the output of tla abrowse,
+# fetch the changesets and apply them.
#
=head1 Invocation
- git-archimport [ -h ] [ -v ] [ -o ] [ -a ] [ -f ] [ -T ]
- [ -D depth] [ -t tempdir ] <archive>/<branch> [ <archive>/<branch> ]
+ git-archimport [ -h ] [ -v ] [ -o ] [ -a ] [ -f ] [ -T ]
+ [ -D depth] [ -t tempdir ] <archive>/<branch> [ <archive>/<branch> ]
Imports a project from one or more Arch repositories. It will follow branches
and repositories within the namespaces defined by the <archive/branch>
parameters supplied. If it cannot find the remote branch a merge comes from
-it will just import it as a regular commit. If it can find it, it will mark it
+it will just import it as a regular commit. If it can find it, it will mark it
as a merge whenever possible.
See man (1) git-archimport for more details.
@@ -25,14 +25,14 @@
- create tag objects instead of ref tags
- audit shell-escaping of filenames
- hide our private tags somewhere smarter
- - find a way to make "cat *patches | patch" safe even when patchfiles are missing newlines
+ - find a way to make "cat *patches | patch" safe even when patchfiles are missing newlines
- sort and apply patches by graphing ancestry relations instead of just
relying in dates supplied in the changeset itself.
tla ancestry-graph -m could be helpful here...
=head1 Devel tricks
-Add print in front of the shell commands invoked via backticks.
+Add print in front of the shell commands invoked via backticks.
=head1 Devel Notes
@@ -126,16 +126,16 @@
my $stage = shift;
while (my ($limit, $level) = each %arch_branches) {
next unless $level == $stage;
-
- open ABROWSE, "$TLA abrowse -fkD --merges $limit |"
+
+ open ABROWSE, "$TLA abrowse -fkD --merges $limit |"
or die "Problems with tla abrowse: $!";
-
+
my %ps = (); # the current one
my $lastseen = '';
-
+
while (<ABROWSE>) {
chomp;
-
+
# first record padded w 8 spaces
if (s/^\s{8}\b//) {
my ($id, $type) = split(m/\s+/, $_, 2);
@@ -147,13 +147,13 @@
push (@psets, \%last_ps);
$psets{ $last_ps{id} } = \%last_ps;
}
-
+
my $branch = extract_versionname($id);
%ps = ( id => $id, branch => $branch );
if (%last_ps && ($last_ps{branch} eq $branch)) {
$ps{parent_id} = $last_ps{id};
}
-
+
$arch_branches{$branch} = 1;
$lastseen = 'id';
@@ -166,16 +166,16 @@
$ps{type} = 't';
# read which revision we've tagged when we parse the log
$ps{tag} = $1;
- } else {
+ } else {
warn "Unknown type $type";
}
$arch_branches{$branch} = 1;
$lastseen = 'id';
- } elsif (s/^\s{10}//) {
- # 10 leading spaces or more
+ } elsif (s/^\s{10}//) {
+ # 10 leading spaces or more
# indicate commit metadata
-
+
# date
if ($lastseen eq 'id' && m/^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d)/){
$ps{date} = $1;
@@ -186,12 +186,12 @@
} elsif ($lastseen eq 'merges' && s/^\s{2}//) {
my $id = $_;
push (@{$ps{merges}}, $id);
-
+
# aggressive branch finding:
if ($opt_D) {
my $branch = extract_versionname($id);
my $repo = extract_reponame($branch);
-
+
if (archive_reachable($repo) &&
!defined $arch_branches{$branch}) {
$arch_branches{$branch} = $stage + 1;
@@ -208,10 +208,10 @@
if (@psets && $psets[$#psets]{branch} eq $ps{branch}) {
$temp{parent_id} = $psets[$#psets]{id};
}
- push (@psets, \%temp);
+ push (@psets, \%temp);
$psets{ $temp{id} } = \%temp;
- }
-
+ }
+
close ABROWSE or die "$TLA abrowse failed on $limit\n";
}
} # end foreach $root
@@ -253,7 +253,7 @@
while (my $file = readdir(DIR)) {
# skip non-interesting-files
next unless -f "$ptag_dir/$file";
-
+
# convert first '--' to '/' from old git-archimport to use
# as an archivename/c--b--v private tag
if ($file !~ m!,!) {
@@ -275,7 +275,7 @@
my $fq_cvbr = shift; # archivename/[[[[category]branch]version]revision]
return (split(/\//, $fq_cvbr))[0];
}
-
+
sub extract_versionname {
my $name = shift;
$name =~ s/--(?:patch|version(?:fix)?|base)-\d+$//;
@@ -283,7 +283,7 @@
}
# convert a fully-qualified revision or version to a unique dirname:
-# normalperson@yhbt.net-05/mpd--uclinux--1--patch-2
+# normalperson@yhbt.net-05/mpd--uclinux--1--patch-2
# becomes: normalperson@yhbt.net-05,mpd--uclinux--1
#
# the git notion of a branch is closer to
@@ -339,7 +339,7 @@
sub process_patchset_accurate {
my $ps = shift;
-
+
# switch to that branch if we're not already in that branch:
if (-e "$git_dir/refs/heads/$ps->{branch}") {
system('git-checkout','-f',$ps->{branch}) == 0 or die "$! $?\n";
@@ -348,7 +348,7 @@
my $rm = safe_pipe_capture('git-ls-files','--others','-z');
rmtree(split(/\0/,$rm)) if $rm;
}
-
+
# Apply the import/changeset/merge into the working tree
my $dir = sync_to_ps($ps);
# read the new log entry:
@@ -361,9 +361,9 @@
parselog($ps, \@commitlog);
if ($ps->{id} =~ /--base-0$/ && $ps->{id} ne $psets[0]{id}) {
- # this should work when importing continuations
+ # this should work when importing continuations
if ($ps->{tag} && (my $branchpoint = eval { ptag($ps->{tag}) })) {
-
+
# find where we are supposed to branch from
if (! -e "$git_dir/refs/heads/$ps->{branch}") {
system('git-branch',$ps->{branch},$branchpoint) == 0 or die "$! $?\n";
@@ -388,8 +388,8 @@
}
# allow multiple bases/imports here since Arch supports cherry-picks
# from unrelated trees
- }
-
+ }
+
# update the index with all the changes we got
system('git-diff-files --name-only -z | '.
'git-update-index --remove -z --stdin') == 0 or die "$! $?\n";
@@ -402,7 +402,7 @@
# does not handle permissions or any renames involving directories
sub process_patchset_fast {
my $ps = shift;
- #
+ #
# create the branch if needed
#
if ($ps->{type} eq 'i' && !$import) {
@@ -417,9 +417,9 @@
# new branch! we need to verify a few things
die "Branch on a non-tag!" unless $ps->{type} eq 't';
my $branchpoint = ptag($ps->{tag});
- die "Tagging from unknown id unsupported: $ps->{tag}"
+ die "Tagging from unknown id unsupported: $ps->{tag}"
unless $branchpoint;
-
+
# find where we are supposed to branch from
if (! -e "$git_dir/refs/heads/$ps->{branch}") {
system('git-branch',$ps->{branch},$branchpoint) == 0 or die "$! $?\n";
@@ -435,13 +435,13 @@
}
system('git-checkout',$ps->{branch}) == 0 or die "$! $?\n";
return 0;
- }
+ }
die $! if $?;
- }
+ }
#
# Apply the import/changeset/merge into the working tree
- #
+ #
if ($ps->{type} eq 'i' || $ps->{type} eq 't') {
apply_import($ps) or die $!;
$stats{import_or_tag}++;
@@ -455,10 +455,10 @@
# prepare update git's index, based on what arch knows
# about the pset, resolve parents, etc
#
-
- my @commitlog = safe_pipe_capture($TLA,'cat-archive-log',$ps->{id});
+
+ my @commitlog = safe_pipe_capture($TLA,'cat-archive-log',$ps->{id});
die "Error in cat-archive-log: $!" if $?;
-
+
parselog($ps,\@commitlog);
# imports don't give us good info
@@ -485,10 +485,10 @@
if (@$ren % 2) {
die "Odd number of entries in rename!?";
}
-
+
while (@$ren) {
my $from = shift @$ren;
- my $to = shift @$ren;
+ my $to = shift @$ren;
unless (-d dirname($to)) {
mkpath(dirname($to)); # will die on err
@@ -529,20 +529,20 @@
"Things may be a bit slow\n";
*process_patchset = *process_patchset_accurate;
}
-
+
foreach my $ps (@psets) {
# process patchsets
$ps->{branch} = git_branchname($ps->{id});
#
- # ensure we have a clean state
- #
+ # ensure we have a clean state
+ #
if (my $dirty = `git-diff-files`) {
die "Unclean tree when about to process $ps->{id} " .
" - did we fail to commit cleanly before?\n$dirty";
}
die $! if $?;
-
+
#
# skip commits already in repo
#
@@ -559,7 +559,7 @@
my $tree = `git-write-tree`;
die "cannot write tree $!" if $?;
chomp $tree;
-
+
#
# Who's your daddy?
#
@@ -570,18 +570,18 @@
close HEAD;
chomp $p;
push @par, '-p', $p;
- } else {
+ } else {
if ($ps->{type} eq 's') {
warn "Could not find the right head for the branch $ps->{branch}";
}
}
}
-
+
if ($ps->{merges}) {
push @par, find_parents($ps);
}
- #
+ #
# Commit, tag and clean state
#
$ENV{TZ} = 'GMT';
@@ -592,14 +592,14 @@
$ENV{GIT_COMMITTER_EMAIL} = $ps->{email};
$ENV{GIT_COMMITTER_DATE} = $ps->{date};
- my $pid = open2(*READER, *WRITER,'git-commit-tree',$tree,@par)
+ my $pid = open2(*READER, *WRITER,'git-commit-tree',$tree,@par)
or die $!;
print WRITER $ps->{summary},"\n\n";
print WRITER $ps->{message},"\n";
-
+
# make it easy to backtrack and figure out which Arch revision this was:
print WRITER 'git-archimport-id: ',$ps->{id},"\n";
-
+
close WRITER;
my $commitid = <READER>; # read
chomp $commitid;
@@ -611,7 +611,7 @@
}
#
# Update the branch
- #
+ #
open HEAD, ">","$git_dir/refs/heads/$ps->{branch}";
print HEAD $commitid;
close HEAD;
@@ -640,7 +640,7 @@
sub sync_to_ps {
my $ps = shift;
my $tree_dir = $tmp.'/'.tree_dirname($ps->{id});
-
+
$opt_v && print "sync_to_ps($ps->{id}) method: ";
if (-d $tree_dir) {
@@ -674,7 +674,7 @@
safe_pipe_capture($TLA,'get','--no-pristine',$ps->{id},$tree_dir);
$stats{get_new}++;
}
-
+
# added -I flag to rsync since we're going to fast! AIEEEEE!!!!
system('rsync','-aI','--delete','--exclude',$git_dir,
# '--exclude','.arch-inventory',
@@ -691,15 +691,15 @@
mkpath($tmp);
safe_pipe_capture($TLA,'get','-s','--no-pristine',$ps->{id},"$tmp/import");
- die "Cannot get import: $!" if $?;
+ die "Cannot get import: $!" if $?;
system('rsync','-aI','--delete', '--exclude',$git_dir,
'--exclude','.arch-ids','--exclude','{arch}',
"$tmp/import/", './');
die "Cannot rsync import:$!" if $?;
-
+
rmtree("$tmp/import");
die "Cannot remove tempdir: $!" if $?;
-
+
return 1;
}
@@ -712,13 +712,13 @@
# get the changeset
safe_pipe_capture($TLA,'get-changeset',$ps->{id},"$tmp/changeset");
die "Cannot get changeset: $!" if $?;
-
+
# apply patches
if (`find $tmp/changeset/patches -type f -name '*.patch'`) {
# this can be sped up considerably by doing
# (find | xargs cat) | patch
# but that can get mucked up by patches
- # with missing trailing newlines or the standard
+ # with missing trailing newlines or the standard
# 'missing newline' flag in the patch - possibly
# produced with an old/buggy diff.
# slow and safe, we invoke patch once per patchfile
@@ -741,7 +741,7 @@
# bring in new files
system('rsync','-aI','--exclude',$git_dir,
- '--exclude','.arch-ids',
+ '--exclude','.arch-ids',
'--exclude', '{arch}',
"$tmp/changeset/new-files-archive/",'./');
@@ -789,7 +789,7 @@
removed_files => 1,
removed_directories => 1,
);
-
+
chomp (@$log);
while ($_ = shift @$log) {
if (/^Continuation-of:\s*(.*)/) {
@@ -828,7 +828,7 @@
}
}
}
-
+
# drop leading empty lines from the log message
while (@$log && $log->[0] eq '') {
shift @$log;
@@ -842,7 +842,7 @@
$ps->{summary} = $log->[0] . '...';
}
$ps->{message} = join("\n",@$log);
-
+
# skip Arch control files, unescape pika-escaped files
foreach my $k (keys %want_headers) {
next unless (defined $ps->{$k});
@@ -867,7 +867,7 @@
# write/read a tag
sub tag {
my ($tag, $commit) = @_;
-
+
if ($opt_o) {
$tag =~ s|/|--|g;
} else {
@@ -875,7 +875,7 @@
$patchname =~ s/.*--//;
$tag = git_branchname ($tag) . '--' . $patchname;
}
-
+
if ($commit) {
open(C,">","$git_dir/refs/tags/$tag")
or die "Cannot create tag $tag: $!\n";
@@ -902,8 +902,8 @@
my ($tag, $commit) = @_;
# don't use subdirs for tags yet, it could screw up other porcelains
- $tag =~ s|/|,|g;
-
+ $tag =~ s|/|,|g;
+
my $tag_file = "$ptag_dir/$tag";
my $tag_branch_dir = dirname($tag_file);
mkpath($tag_branch_dir) unless (-d $tag_branch_dir);
@@ -915,7 +915,7 @@
or die "Cannot write tag $tag: $!\n";
close(C)
or die "Cannot write tag $tag: $!\n";
- $rptags{$commit} = $tag
+ $rptags{$commit} = $tag
unless $tag =~ m/--base-0$/;
} else { # read
# if the tag isn't there, return 0
@@ -941,7 +941,7 @@
# Identify what branches are merging into me
# and whether we are fully merged
# git-merge-base <headsha> <headsha> should tell
- # me what the base of the merge should be
+ # me what the base of the merge should be
#
my $ps = shift;
@@ -963,14 +963,14 @@
}
#
- # foreach branch find a merge base and walk it to the
+ # foreach branch find a merge base and walk it to the
# head where we are, collecting the merged patchsets that
# Arch has recorded. Keep that in @have
# Compare that with the commits on the other branch
# between merge-base and the tip of the branch (@need)
# and see if we have a series of consecutive patches
# starting from the merge base. The tip of the series
- # of consecutive patches merged is our new parent for
+ # of consecutive patches merged is our new parent for
# that branch.
#
foreach my $branch (keys %branches) {
@@ -979,13 +979,13 @@
next unless -e "$git_dir/refs/heads/$branch";
my $mergebase = `git-merge-base $branch $ps->{branch}`;
- if ($?) {
- # Don't die here, Arch supports one-way cherry-picking
- # between branches with no common base (or any relationship
- # at all beforehand)
- warn "Cannot find merge base for $branch and $ps->{branch}";
- next;
- }
+ if ($?) {
+ # Don't die here, Arch supports one-way cherry-picking
+ # between branches with no common base (or any relationship
+ # at all beforehand)
+ warn "Cannot find merge base for $branch and $ps->{branch}";
+ next;
+ }
chomp $mergebase;
# now walk up to the mergepoint collecting what patches we have
@@ -1010,7 +1010,7 @@
# merge what we have with what ancestors have
%have = (%have, %ancestorshave);
- # see what the remote branch has - these are the merges we
+ # see what the remote branch has - these are the merges we
# will want to have in a consecutive series from the mergebase
my $otherbranchtip = git_rev_parse($branch);
my @needraw = `git-rev-list --topo-order $otherbranchtip ^$mergebase`;
@@ -1018,7 +1018,7 @@
foreach my $needps (@needraw) { # get the psets
$needps = commitid2pset($needps);
# git-rev-list will also
- # list commits merged in via earlier
+ # list commits merged in via earlier
# merges. we are only interested in commits
# from the branch we're looking at
if ($branch eq $needps->{branch}) {
@@ -1054,7 +1054,7 @@
next unless ref $psets{$p}{merges};
my @merges = @{$psets{$p}{merges}};
foreach my $merge (@merges) {
- if ($parents{$merge}) {
+ if ($parents{$merge}) {
delete $parents{$merge};
}
}
@@ -1079,10 +1079,10 @@
sub commitid2pset {
my $commitid = shift;
chomp $commitid;
- my $name = $rptags{$commitid}
+ my $name = $rptags{$commitid}
|| die "Cannot find reverse tag mapping for $commitid";
$name =~ s|,|/|;
- my $ps = $psets{$name}
+ my $ps = $psets{$name}
|| (print Dumper(sort keys %psets)) && die "Cannot find patchset for $name";
return $ps;
}
@@ -1112,7 +1112,7 @@
my $archive = shift;
return 1 if $reachable{$archive};
return 0 if $unreachable{$archive};
-
+
if (system "$TLA whereis-archive $archive >/dev/null") {
if ($opt_a && (system($TLA,'register-archive',
"http://mirrors.sourcecontrol.net/$archive") == 0)) {
@@ -1127,4 +1127,3 @@
return 1;
}
}
-
diff --git a/git-checkout.sh b/git-checkout.sh
index 6b6facf..d561c88 100755
--- a/git-checkout.sh
+++ b/git-checkout.sh
@@ -210,7 +210,7 @@
esac
# Match the index to the working tree, and do a three-way.
- git diff-files --name-only | git update-index --remove --stdin &&
+ git diff-files --name-only | git update-index --remove --stdin &&
work=`git write-tree` &&
git read-tree $v --reset -u $new || exit
@@ -245,7 +245,7 @@
(exit $saved_err)
fi
-#
+#
# Switch the HEAD pointer to the new branch if we
# checked out a branch head, and remove any potential
# old MERGE_HEAD's (subsequent commits will clearly not
diff --git a/git-clone.sh b/git-clone.sh
index fdd354f..5bfd8d1 100755
--- a/git-clone.sh
+++ b/git-clone.sh
@@ -2,7 +2,7 @@
#
# Copyright (c) 2005, Linus Torvalds
# Copyright (c) 2005, Junio C Hamano
-#
+#
# Clone a repository into a different directory that does not yet exist.
# See git-sh-setup why.
@@ -98,7 +98,7 @@
*,--na|*,--nak|*,--nake|*,--naked|\
*,-b|*,--b|*,--ba|*,--bar|*,--bare) bare=yes ;;
*,-l|*,--l|*,--lo|*,--loc|*,--loca|*,--local) use_local=yes ;;
- *,-s|*,--s|*,--sh|*,--sha|*,--shar|*,--share|*,--shared)
+ *,-s|*,--s|*,--sh|*,--sha|*,--shar|*,--share|*,--shared)
local_shared=yes; use_local=yes ;;
1,--template) usage ;;
*,--template)
@@ -410,4 +410,3 @@
rm -f "$GIT_DIR/CLONE_HEAD" "$GIT_DIR/REMOTE_HEAD"
trap - 0
-
diff --git a/git-commit.sh b/git-commit.sh
index e8b60f7..5547a02 100755
--- a/git-commit.sh
+++ b/git-commit.sh
@@ -557,7 +557,7 @@
} >>"$GIT_DIR"/COMMIT_EDITMSG
else
# we need to check if there is anything to commit
- run_status >/dev/null
+ run_status >/dev/null
fi
if [ "$?" != "0" -a ! -f "$GIT_DIR/MERGE_HEAD" -a -z "$amend" ]
then
diff --git a/git-cvsexportcommit.perl b/git-cvsexportcommit.perl
index 42060ef..e9832d2 100755
--- a/git-cvsexportcommit.perl
+++ b/git-cvsexportcommit.perl
@@ -197,7 +197,7 @@
# ... validate new files,
foreach my $f (@afiles) {
if (defined ($cvsstat{$f}) and $cvsstat{$f} ne "Unknown") {
- $dirty = 1;
+ $dirty = 1;
warn "File $f is already known in your CVS checkout -- perhaps it has been added by another user. Or this may indicate that it exists on a different branch. If this is the case, use -f to force the merge.\n";
warn "Status was: $cvsstat{$f}\n";
}
diff --git a/git-cvsimport.perl b/git-cvsimport.perl
index 4e6c9c6..3225a2a 100755
--- a/git-cvsimport.perl
+++ b/git-cvsimport.perl
@@ -145,7 +145,7 @@
if ($#ARGV == 0) {
$cvs_tree = $ARGV[0];
} elsif (-f 'CVS/Repository') {
- open my $f, '<', 'CVS/Repository' or
+ open my $f, '<', 'CVS/Repository' or
die 'Failed to open CVS/Repository';
$cvs_tree = <$f>;
chomp $cvs_tree;
@@ -434,7 +434,7 @@
my ($self,$fn,$rev) = @_;
my $res;
- my ($fh, $name) = tempfile('gitcvs.XXXXXX',
+ my ($fh, $name) = tempfile('gitcvs.XXXXXX',
DIR => File::Spec->tmpdir(), UNLINK => 1);
$self->_file($fn,$rev) and $res = $self->_line($fh);
@@ -520,8 +520,8 @@
sub get_headref ($$) {
my $name = shift;
- my $git_dir = shift;
-
+ my $git_dir = shift;
+
my $f = "$git_dir/refs/heads/$name";
if (open(my $fh, $f)) {
chomp(my $r = <$fh>);
@@ -771,7 +771,7 @@
$xtag =~ s/\s+\*\*.*$//; # Remove stuff like ** INVALID ** and ** FUNKY **
$xtag =~ tr/_/\./ if ( $opt_u );
$xtag =~ s/[\/]/$opt_s/g;
-
+
my $pid = open2($in, $out, 'git-mktag');
print $out "object $cid\n".
"type commit\n".
@@ -788,7 +788,7 @@
$? != 0 or $tagobj !~ /^[0123456789abcdef]{40}$/ ) {
die "Cannot create tag object $xtag: $!\n";
}
-
+
open(C,">$git_dir/refs/tags/$xtag")
or die "Cannot create tag $xtag: $!\n";
diff --git a/git-gui/GIT-VERSION-GEN b/git-gui/GIT-VERSION-GEN
index 25647c8..eee495a 100755
--- a/git-gui/GIT-VERSION-GEN
+++ b/git-gui/GIT-VERSION-GEN
@@ -78,5 +78,3 @@
echo >&2 "GITGUI_VERSION = $VN"
echo "GITGUI_VERSION = $VN" >$GVF
}
-
-
diff --git a/git-gui/lib/class.tcl b/git-gui/lib/class.tcl
index 88b0565..72494c1 100644
--- a/git-gui/lib/class.tcl
+++ b/git-gui/lib/class.tcl
@@ -151,4 +151,3 @@
[format { [list source [file join $dir %s]]} \
[file split $scriptFile]] "\n"
}
-
diff --git a/git-merge-one-file.sh b/git-merge-one-file.sh
index 7d62d79..254d210 100755
--- a/git-merge-one-file.sh
+++ b/git-merge-one-file.sh
@@ -88,7 +88,7 @@
# remove lines that are unique to ours.
orig=`git-unpack-file $2`
sz0=`wc -c <"$orig"`
- diff -u -La/$orig -Lb/$orig $orig $src2 | git-apply --no-add
+ diff -u -La/$orig -Lb/$orig $orig $src2 | git-apply --no-add
sz1=`wc -c <"$orig"`
# If we do not have enough common material, it is not
diff --git a/git-p4import.py b/git-p4import.py
index 60a758b..0f3d97b 100644
--- a/git-p4import.py
+++ b/git-p4import.py
@@ -358,4 +358,3 @@
if stitch == 1:
git.clean_directories()
stitch = 0
-
diff --git a/git-svnimport.perl b/git-svnimport.perl
index 3af8c7e..f459762 100755
--- a/git-svnimport.perl
+++ b/git-svnimport.perl
@@ -542,7 +542,7 @@
if ($node_kind eq $SVN::Node::dir) {
$srcpath =~ s#/*$#/#;
}
-
+
my $pid = open my $f,'-|';
die $! unless defined $pid;
if (!$pid) {
@@ -560,7 +560,7 @@
} else {
$p = $path;
}
- push(@$new,[$mode,$sha1,$p]);
+ push(@$new,[$mode,$sha1,$p]);
}
close($f) or
print STDERR "$newrev:$newbranch: could not list files in $oldpath \@ $rev\n";
diff --git a/git-tag.sh b/git-tag.sh
index 37cee97..c840439 100755
--- a/git-tag.sh
+++ b/git-tag.sh
@@ -64,7 +64,7 @@
done
;;
-m)
- annotate=1
+ annotate=1
shift
message="$1"
if test "$#" = "0"; then
@@ -90,7 +90,7 @@
username="$1"
;;
-d)
- shift
+ shift
had_error=0
for tag
do
@@ -180,4 +180,3 @@
fi
git update-ref "refs/tags/$name" "$object" "$prev"
-
diff --git a/git-verify-tag.sh b/git-verify-tag.sh
index 8db7dd0..f2d5597 100755
--- a/git-verify-tag.sh
+++ b/git-verify-tag.sh
@@ -42,4 +42,3 @@
sed '/-----BEGIN PGP/Q' |
gpg --verify "$GIT_DIR/.tmp-vtag" - || exit 1
rm -f "$GIT_DIR/.tmp-vtag"
-
diff --git a/git.spec.in b/git.spec.in
index 3a45eb8..b9dc1d5 100644
--- a/git.spec.in
+++ b/git.spec.in
@@ -63,7 +63,7 @@
%package email
Summary: Git tools for sending email
Group: Development/Tools
-Requires: git-core = %{version}-%{release}
+Requires: git-core = %{version}-%{release}
%description email
Git tools for sending email.
diff --git a/gitk b/gitk
index a57e84c..87c3690 100755
--- a/gitk
+++ b/gitk
@@ -337,7 +337,7 @@
set tagids($name) $commit
lappend idtags($commit) $name
}
- }
+ }
catch {
set tagcontents($name) [exec git cat-file tag $id]
}
diff --git a/gitweb/README b/gitweb/README
index e02e90f..7186ced 100644
--- a/gitweb/README
+++ b/gitweb/README
@@ -79,4 +79,3 @@
Any comment/question/concern to:
Git mailing list <git@vger.kernel.org>
-
diff --git a/help.c b/help.c
index 6a9af4d..1cd33ec 100644
--- a/help.c
+++ b/help.c
@@ -219,5 +219,3 @@
return 0;
}
-
-
diff --git a/http-fetch.c b/http-fetch.c
index 09baedc..202fae0 100644
--- a/http-fetch.c
+++ b/http-fetch.c
@@ -828,7 +828,7 @@
}
unlink(obj_req->tmpfile);
if (obj_req->slot) {
- release_active_slot(obj_req->slot);
+ release_active_slot(obj_req->slot);
obj_req->slot = NULL;
}
release_object_request(obj_req);
diff --git a/http-push.c b/http-push.c
index 79d2c38..7c3720f 100644
--- a/http-push.c
+++ b/http-push.c
@@ -518,7 +518,7 @@
request->buffer.size = stream.total_out;
request->buffer.posn = 0;
- request->url = xmalloc(strlen(remote->url) +
+ request->url = xmalloc(strlen(remote->url) +
strlen(request->lock->token) + 51);
strcpy(request->url, remote->url);
posn = request->url + strlen(remote->url);
diff --git a/http.c b/http.c
index ae27e0c..c6fb8ac 100644
--- a/http.c
+++ b/http.c
@@ -137,7 +137,7 @@
return 0;
}
-#ifdef USE_CURL_MULTI
+#ifdef USE_CURL_MULTI
if (!strcmp("http.maxrequests", var)) {
if (max_requests == -1)
max_requests = git_config_int(var, value);
diff --git a/imap-send.c b/imap-send.c
index 4283a4a..a5a0696 100644
--- a/imap-send.c
+++ b/imap-send.c
@@ -1239,7 +1239,7 @@
msg->data[ msg->len ] = 0;
*ofs += msg->len;
- return 1;
+ return 1;
}
static imap_server_conf_t server =
diff --git a/local-fetch.c b/local-fetch.c
index 4b650ef..bf7ec6c 100644
--- a/local-fetch.c
+++ b/local-fetch.c
@@ -114,7 +114,7 @@
return -1;
target = find_sha1_pack(sha1, packs);
if (!target)
- return error("Couldn't find %s: not separate or in any pack",
+ return error("Couldn't find %s: not separate or in any pack",
sha1_to_hex(sha1));
if (get_verbosely) {
fprintf(stderr, "Getting pack %s\n",
@@ -122,11 +122,11 @@
fprintf(stderr, " which contains %s\n",
sha1_to_hex(sha1));
}
- sprintf(filename, "%s/objects/pack/pack-%s.pack",
+ sprintf(filename, "%s/objects/pack/pack-%s.pack",
path, sha1_to_hex(target->sha1));
copy_file(filename, sha1_pack_name(target->sha1),
sha1_to_hex(target->sha1), 1);
- sprintf(filename, "%s/objects/pack/pack-%s.idx",
+ sprintf(filename, "%s/objects/pack/pack-%s.idx",
path, sha1_to_hex(target->sha1));
copy_file(filename, sha1_pack_index_name(target->sha1),
sha1_to_hex(target->sha1), 1);
@@ -141,7 +141,7 @@
char *hex = sha1_to_hex(sha1);
char *dest_filename = sha1_file_name(sha1);
- if (object_name_start < 0) {
+ if (object_name_start < 0) {
strcpy(filename, path); /* e.g. git.git */
strcat(filename, "/objects/");
object_name_start = strlen(filename);
diff --git a/lockfile.c b/lockfile.c
index 23db35a..5ad2858 100644
--- a/lockfile.c
+++ b/lockfile.c
@@ -97,4 +97,3 @@
unlink(lk->filename);
lk->filename[0] = 0;
}
-
diff --git a/mailmap.c b/mailmap.c
index cb567a2..8714167 100644
--- a/mailmap.c
+++ b/mailmap.c
@@ -89,4 +89,3 @@
}
return 0;
}
-
diff --git a/match-trees.c b/match-trees.c
index 23cafe4..d7e29c4 100644
--- a/match-trees.c
+++ b/match-trees.c
@@ -301,4 +301,3 @@
splice_tree(hash1, add_prefix, hash2, shifted);
}
-
diff --git a/merge-index.c b/merge-index.c
index 5599fd3..fa719cb 100644
--- a/merge-index.c
+++ b/merge-index.c
@@ -25,7 +25,7 @@
static int merge_entry(int pos, const char *path)
{
int found;
-
+
if (pos >= active_nr)
die("git-merge-index: %s not in the cache", path);
arguments[0] = pgm;
diff --git a/mktag.c b/mktag.c
index 9310111..070bc96 100644
--- a/mktag.c
+++ b/mktag.c
@@ -11,7 +11,7 @@
* The first three lines are guaranteed to be at least 63 bytes:
* "object <sha1>\n" is 48 bytes, "type tag\n" at 9 bytes is the
* shortest possible type-line, and "tag .\n" at 6 bytes is the
- * shortest single-character-tag line.
+ * shortest single-character-tag line.
*
* We also artificially limit the size of the full object to 8kB.
* Just because I'm a lazy bastard, and if you can't fit a signature
diff --git a/mozilla-sha1/sha1.c b/mozilla-sha1/sha1.c
index 847531d..3f06b83 100644
--- a/mozilla-sha1/sha1.c
+++ b/mozilla-sha1/sha1.c
@@ -1,29 +1,29 @@
-/*
+/*
* The contents of this file are subject to the Mozilla Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/MPL/
- *
+ *
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
- *
+ *
* The Original Code is SHA 180-1 Reference Implementation (Compact version)
- *
+ *
* The Initial Developer of the Original Code is Paul Kocher of
- * Cryptography Research. Portions created by Paul Kocher are
+ * Cryptography Research. Portions created by Paul Kocher are
* Copyright (C) 1995-9 by Cryptography Research, Inc. All
* Rights Reserved.
- *
+ *
* Contributor(s):
*
* Paul Kocher
- *
+ *
* Alternatively, the contents of this file may be used under the
* terms of the GNU General Public License Version 2 or later (the
- * "GPL"), in which case the provisions of the GPL are applicable
- * instead of those above. If you wish to allow use of your
+ * "GPL"), in which case the provisions of the GPL are applicable
+ * instead of those above. If you wish to allow use of your
* version of this file only under the terms of the GPL and not to
* allow others to use your version of this file under the MPL,
* indicate your decision by deleting the provisions above and
@@ -149,4 +149,3 @@
ctx->H[3] += D;
ctx->H[4] += E;
}
-
diff --git a/mozilla-sha1/sha1.h b/mozilla-sha1/sha1.h
index 5d82afa..16f2d3d 100644
--- a/mozilla-sha1/sha1.h
+++ b/mozilla-sha1/sha1.h
@@ -1,29 +1,29 @@
-/*
+/*
* The contents of this file are subject to the Mozilla Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/MPL/
- *
+ *
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
- *
+ *
* The Original Code is SHA 180-1 Header File
- *
+ *
* The Initial Developer of the Original Code is Paul Kocher of
- * Cryptography Research. Portions created by Paul Kocher are
+ * Cryptography Research. Portions created by Paul Kocher are
* Copyright (C) 1995-9 by Cryptography Research, Inc. All
* Rights Reserved.
- *
+ *
* Contributor(s):
*
* Paul Kocher
- *
+ *
* Alternatively, the contents of this file may be used under the
* terms of the GNU General Public License Version 2 or later (the
- * "GPL"), in which case the provisions of the GPL are applicable
- * instead of those above. If you wish to allow use of your
+ * "GPL"), in which case the provisions of the GPL are applicable
+ * instead of those above. If you wish to allow use of your
* version of this file only under the terms of the GPL and not to
* allow others to use your version of this file under the MPL,
* indicate your decision by deleting the provisions above and
diff --git a/object-refs.c b/object-refs.c
index 022e8d8..5345671 100644
--- a/object-refs.c
+++ b/object-refs.c
@@ -85,5 +85,3 @@
mark_reachable(refs->ref[i], mask);
}
}
-
-
diff --git a/object.h b/object.h
index 94f19ee..397bbfa 100644
--- a/object.h
+++ b/object.h
@@ -66,7 +66,7 @@
void mark_reachable(struct object *obj, unsigned int mask);
-struct object_list *object_list_insert(struct object *item,
+struct object_list *object_list_insert(struct object *item,
struct object_list **list_p);
void object_list_append(struct object *item,
diff --git a/pack-redundant.c b/pack-redundant.c
index 6bc3bdf..f5cd0ac 100644
--- a/pack-redundant.c
+++ b/pack-redundant.c
@@ -81,7 +81,7 @@
{
struct llist *ret;
struct llist_item *new, *old, *prev;
-
+
llist_init(&ret);
if ((ret->size = list->size) == 0)
@@ -100,7 +100,7 @@
}
new->next = NULL;
ret->back = new;
-
+
return ret;
}
diff --git a/patch-id.c b/patch-id.c
index 086d2d9..9349bc5 100644
--- a/patch-id.c
+++ b/patch-id.c
@@ -81,4 +81,4 @@
generate_id_list();
return 0;
-}
+}
diff --git a/path-list.c b/path-list.c
index caaa5cc..dcb4b3a 100644
--- a/path-list.c
+++ b/path-list.c
@@ -100,4 +100,3 @@
for (i = 0; i < p->nr; i++)
printf("%s:%p\n", p->items[i].path, p->items[i].util);
}
-
diff --git a/perl/Makefile b/perl/Makefile
index 0d695fd..5e079ad 100644
--- a/perl/Makefile
+++ b/perl/Makefile
@@ -40,4 +40,3 @@
# (even though GIT-CFLAGS aren't used yet. If ever)
../GIT-CFLAGS:
$(MAKE) -C .. GIT-CFLAGS
-
diff --git a/pkt-line.c b/pkt-line.c
index b605268..355546a 100644
--- a/pkt-line.c
+++ b/pkt-line.c
@@ -5,7 +5,7 @@
* Write a packetized stream, where each line is preceded by
* its length (including the header) as a 4-byte hex number.
* A length of 'zero' means end of stream (and a length of 1-3
- * would be an error).
+ * would be an error).
*
* This is all pretty stupid, but we use this packetized line
* format to make a streaming format possible without ever
diff --git a/ppc/sha1.c b/ppc/sha1.c
index 0820398..738e36c 100644
--- a/ppc/sha1.c
+++ b/ppc/sha1.c
@@ -50,7 +50,7 @@
p += nb;
}
return 0;
-}
+}
int SHA1_Final(unsigned char *hash, SHA_CTX *c)
{
diff --git a/read-cache.c b/read-cache.c
index ad4e187..4362b11 100644
--- a/read-cache.c
+++ b/read-cache.c
@@ -166,7 +166,7 @@
changed |= MTIME_CHANGED;
if (ce->ce_ctime.nsec != htonl(st->st_ctim.tv_nsec))
changed |= CTIME_CHANGED;
-#endif
+#endif
if (ce->ce_uid != htonl(st->st_uid) ||
ce->ce_gid != htonl(st->st_gid))
@@ -597,7 +597,7 @@
* is being added, or we already have path and path/file is being
* added. Either one would result in a nonsense tree that has path
* twice when git-write-tree tries to write it out. Prevent it.
- *
+ *
* If ok-to-replace is specified, we remove the conflicting entries
* from the cache so the caller should recompute the insert position.
* When this happens, we return non-zero.
@@ -970,8 +970,8 @@
write_buffer_len = buffered;
len -= partial;
data = (char *) data + partial;
- }
- return 0;
+ }
+ return 0;
}
static int write_index_ext_header(SHA_CTX *context, int fd,
@@ -1037,7 +1037,7 @@
* size to zero here, then the object name recorded
* in index is the 6-byte file but the cached stat information
* becomes zero --- which would then match what we would
- * obtain from the filesystem next time we stat("frotz").
+ * obtain from the filesystem next time we stat("frotz").
*
* However, the second update-index, before calling
* this function, notices that the cached size is 6
diff --git a/rsh.h b/rsh.h
index 3b41942..ee2f499 100644
--- a/rsh.h
+++ b/rsh.h
@@ -1,7 +1,7 @@
#ifndef RSH_H
#define RSH_H
-int setup_connection(int *fd_in, int *fd_out, const char *remote_prog,
+int setup_connection(int *fd_in, int *fd_out, const char *remote_prog,
char *url, int rmt_argc, char **rmt_argv);
#endif
diff --git a/setup.c b/setup.c
index a45ea83..14f62c4 100644
--- a/setup.c
+++ b/setup.c
@@ -39,7 +39,7 @@
if (len) {
int speclen = strlen(path);
char *n = xmalloc(speclen + len + 1);
-
+
memcpy(n, prefix, len);
memcpy(n + len, path, speclen+1);
path = n;
@@ -47,7 +47,7 @@
return path;
}
-/*
+/*
* Unlike prefix_path, this should be used if the named file does
* not have to interact with index entry; i.e. name of a random file
* on the filesystem.
diff --git a/sha1_file.c b/sha1_file.c
index 30bcd46..2b86086 100644
--- a/sha1_file.c
+++ b/sha1_file.c
@@ -193,7 +193,7 @@
*buf++ = hex[val >> 4];
*buf++ = hex[val & 0xf];
}
-
+
return base;
}
@@ -218,7 +218,7 @@
*buf++ = hex[val >> 4];
*buf++ = hex[val & 0xf];
}
-
+
return base;
}
@@ -1139,7 +1139,7 @@
unsigned long size;
/*
- * The type can be at most ten bytes (including the
+ * The type can be at most ten bytes (including the
* terminating '\0' that we add), and is followed by
* a space.
*/
@@ -1738,7 +1738,7 @@
return 0;
}
-struct packed_git *find_sha1_pack(const unsigned char *sha1,
+struct packed_git *find_sha1_pack(const unsigned char *sha1,
struct packed_git *packs)
{
struct packed_git *p;
diff --git a/shallow.c b/shallow.c
index d178689..dbd9f5a 100644
--- a/shallow.c
+++ b/shallow.c
@@ -101,4 +101,3 @@
return result;
}
-
diff --git a/ssh-upload.c b/ssh-upload.c
index 498d41e..20c35f0 100644
--- a/ssh-upload.c
+++ b/ssh-upload.c
@@ -29,24 +29,24 @@
}
if (!size)
return -1;
-
+
if (verbose)
fprintf(stderr, "Serving %s\n", sha1_to_hex(sha1));
remote = 0;
-
+
if (!has_sha1_file(sha1)) {
fprintf(stderr, "git-ssh-upload: could not find %s\n",
sha1_to_hex(sha1));
remote = -1;
}
-
+
if (write_in_full(fd_out, &remote, 1) != 1)
return 0;
-
+
if (remote < 0)
return 0;
-
+
return write_sha1_to_fd(fd_out, sha1);
}
diff --git a/strbuf.c b/strbuf.c
index 7f14b0f..e33d06b 100644
--- a/strbuf.c
+++ b/strbuf.c
@@ -39,4 +39,3 @@
sb->eof = 1;
strbuf_end(sb);
}
-
diff --git a/t/Makefile b/t/Makefile
index 19e3850..b25caca 100644
--- a/t/Makefile
+++ b/t/Makefile
@@ -28,4 +28,3 @@
.PHONY: $(T) clean
.NOTPARALLEL:
-
diff --git a/t/lib-read-tree-m-3way.sh b/t/lib-read-tree-m-3way.sh
index d195603..586df21 100644
--- a/t/lib-read-tree-m-3way.sh
+++ b/t/lib-read-tree-m-3way.sh
@@ -87,7 +87,7 @@
test_expect_success \
'recording branch A tree' \
'tree_A=$(git-write-tree)'
-
+
################################################################
# Branch B
# Start from O
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index 186de70..8bfe832 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -37,7 +37,7 @@
find .git/objects -type f -print >should-be-empty
test_expect_success \
'.git/objects should be empty after git-init in an empty repo.' \
- 'cmp -s /dev/null should-be-empty'
+ 'cmp -s /dev/null should-be-empty'
# also it should have 2 subdirectories; no fan-out anymore, pack, and info.
# 3 is counting "objects" itself
diff --git a/t/t1200-tutorial.sh b/t/t1200-tutorial.sh
index ca2c30f..d3f8358 100755
--- a/t/t1200-tutorial.sh
+++ b/t/t1200-tutorial.sh
@@ -159,4 +159,3 @@
test_expect_failure '-> only packed objects' 'find -type f .git/objects/[0-9a-f][0-9a-f]'
test_done
-
diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh
index 3f3fd2d..7731fa7 100755
--- a/t/t1300-repo-config.sh
+++ b/t/t1300-repo-config.sh
@@ -514,4 +514,3 @@
test_expect_success 'value continued on next line' 'cmp result expect'
test_done
-
diff --git a/t/t2000-checkout-cache-clash.sh b/t/t2000-checkout-cache-clash.sh
index 03ea4de..d556b41 100755
--- a/t/t2000-checkout-cache-clash.sh
+++ b/t/t2000-checkout-cache-clash.sh
@@ -49,5 +49,3 @@
'test -f path0 && test -d path1 && test -f path1/file1'
test_done
-
-
diff --git a/t/t2001-checkout-cache-clash.sh b/t/t2001-checkout-cache-clash.sh
index 0dcab8f..b895a0f 100755
--- a/t/t2001-checkout-cache-clash.sh
+++ b/t/t2001-checkout-cache-clash.sh
@@ -84,4 +84,3 @@
test ! -h path1/file1 && test -f path1/file1'
test_done
-
diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh
index 86ee2b0..607f57f 100755
--- a/t/t3030-merge-recursive.sh
+++ b/t/t3030-merge-recursive.sh
@@ -525,4 +525,3 @@
'
test_done
-
diff --git a/t/t3403-rebase-skip.sh b/t/t3403-rebase-skip.sh
index 977c498..9e11ed2 100755
--- a/t/t3403-rebase-skip.sh
+++ b/t/t3403-rebase-skip.sh
@@ -54,4 +54,3 @@
test_debug 'gitk --all & sleep 1'
test_done
-
diff --git a/t/t4006-diff-mode.sh b/t/t4006-diff-mode.sh
index e72c6fd..b8acca1 100755
--- a/t/t4006-diff-mode.sh
+++ b/t/t4006-diff-mode.sh
@@ -41,4 +41,3 @@
'git diff expected check'
test_done
-
diff --git a/t/t4100-apply-stat.sh b/t/t4100-apply-stat.sh
index 7b81c32..c23341f 100755
--- a/t/t4100-apply-stat.sh
+++ b/t/t4100-apply-stat.sh
@@ -44,4 +44,3 @@
git diff ../t4100/t-apply-7.expect current'
test_done
-
diff --git a/t/t4110-apply-scan.sh b/t/t4110-apply-scan.sh
index 005f744..9faef0d 100755
--- a/t/t4110-apply-scan.sh
+++ b/t/t4110-apply-scan.sh
@@ -98,4 +98,3 @@
'cmp apply.txt patch.txt'
test_done
-
diff --git a/t/t4112-apply-renames.sh b/t/t4112-apply-renames.sh
index 69e9603..9baf810 100755
--- a/t/t4112-apply-renames.sh
+++ b/t/t4112-apply-renames.sh
@@ -49,10 +49,10 @@
- * arch/x86_64/include/klibc/archsetjmp.h
+ * arch/cris/include/klibc/archsetjmp.h
*/
-
+
#ifndef _KLIBC_ARCHSETJMP_H
#define _KLIBC_ARCHSETJMP_H
-
+
struct __jmp_buf {
- unsigned long __rbx;
- unsigned long __rsp;
@@ -74,9 +74,9 @@
+ unsigned long __sp;
+ unsigned long __srp;
};
-
+
typedef struct __jmp_buf jmp_buf[1];
-
+
-#endif /* _SETJMP_H */
+#endif /* _KLIBC_ARCHSETJMP_H */
diff --git a/klibc/arch/x86_64/include/klibc/archsetjmp.h b/include/arch/m32r/klibc/archsetjmp.h
@@ -90,10 +90,10 @@
- * arch/x86_64/include/klibc/archsetjmp.h
+ * arch/m32r/include/klibc/archsetjmp.h
*/
-
+
#ifndef _KLIBC_ARCHSETJMP_H
#define _KLIBC_ARCHSETJMP_H
-
+
struct __jmp_buf {
- unsigned long __rbx;
- unsigned long __rsp;
@@ -108,9 +108,9 @@
unsigned long __r15;
- unsigned long __rip;
};
-
+
typedef struct __jmp_buf jmp_buf[1];
-
+
-#endif /* _SETJMP_H */
+#endif /* _KLIBC_ARCHSETJMP_H */
EOF
diff --git a/t/t4118-apply-empty-context.sh b/t/t4118-apply-empty-context.sh
index 27cc6f2..dd88e81 100755
--- a/t/t4118-apply-empty-context.sh
+++ b/t/t4118-apply-empty-context.sh
@@ -53,4 +53,3 @@
'
test_done
-
diff --git a/t/t4119-apply-config.sh b/t/t4119-apply-config.sh
index 620a920..edae705 100755
--- a/t/t4119-apply-config.sh
+++ b/t/t4119-apply-config.sh
@@ -24,7 +24,7 @@
+++ file1+ 2007-02-21 01:07:44.000000000 -0800
@@ -1 +1 @@
-A
-+B
++B
EOF
sed -e 's|file1|sub/&|' gpatch.file >gpatch-sub.file &&
diff --git a/t/t4121-apply-diffs.sh b/t/t4121-apply-diffs.sh
index 2b2f1ed..b95b89c 100755
--- a/t/t4121-apply-diffs.sh
+++ b/t/t4121-apply-diffs.sh
@@ -30,4 +30,3 @@
'( git diff test~2 test~1; git diff test~1 test~0 )| git apply'
test_done
-
diff --git a/t/t4122-apply-symlink-inside.sh b/t/t4122-apply-symlink-inside.sh
index 3ddfe64..841773f 100755
--- a/t/t4122-apply-symlink-inside.sh
+++ b/t/t4122-apply-symlink-inside.sh
@@ -53,4 +53,3 @@
'
test_done
-
diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh
index c64ebbb..a46d7f7 100755
--- a/t/t4200-rerere.sh
+++ b/t/t4200-rerere.sh
@@ -148,5 +148,3 @@
"test ! -f $rr/preimage && test ! -f $rr2/preimage"
test_done
-
-
diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh
index 477b267..4eaea8f 100755
--- a/t/t5400-send-pack.sh
+++ b/t/t5400-send-pack.sh
@@ -66,7 +66,7 @@
'
test_expect_success \
- 'pushing rewound head should not barf but require --force' '
+ 'pushing rewound head should not barf but require --force' '
# should not fail but refuse to update.
if git-send-pack ./victim/.git/ master
then
diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh
index 243212d..93eaf2c 100755
--- a/t/t5520-pull.sh
+++ b/t/t5520-pull.sh
@@ -54,4 +54,3 @@
'
test_done
-
diff --git a/t/t5710-info-alternate.sh b/t/t5710-info-alternate.sh
index 2f8e97c..699df6e 100755
--- a/t/t5710-info-alternate.sh
+++ b/t/t5710-info-alternate.sh
@@ -104,4 +104,3 @@
cd "$base_dir"
test_done
-
diff --git a/t/t6000lib.sh b/t/t6000lib.sh
index d402621..d548bf8 100755
--- a/t/t6000lib.sh
+++ b/t/t6000lib.sh
@@ -17,17 +17,17 @@
_text=$1
_tree=$2
shift 2
- echo $_text | git-commit-tree $(tag $_tree) "$@"
+ echo $_text | git-commit-tree $(tag $_tree) "$@"
}
# Save the output of a command into the tag specified. Prepend
# a substitution script for the tag onto the front of sed.script
save_tag()
{
- _tag=$1
+ _tag=$1
[ -n "$_tag" ] || error "usage: save_tag tag commit-args ..."
shift 1
- "$@" >.git/refs/tags/$_tag
+ "$@" >.git/refs/tags/$_tag
echo "s/$(tag $_tag)/$_tag/g" > sed.script.tmp
cat sed.script >> sed.script.tmp
@@ -35,7 +35,7 @@
mv sed.script.tmp sed.script
}
-# Replace unhelpful sha1 hashses with their symbolic equivalents
+# Replace unhelpful sha1 hashses with their symbolic equivalents
entag()
{
sed -f sed.script
@@ -62,7 +62,7 @@
commit_date()
{
_commit=$1
- git-cat-file commit $_commit | sed -n "s/^committer .*> \([0-9]*\) .*/\1/p"
+ git-cat-file commit $_commit | sed -n "s/^committer .*> \([0-9]*\) .*/\1/p"
}
on_committer_date()
@@ -103,14 +103,14 @@
# Execute the test described by the first argument, by eval'ing
# command line specified in the 2nd argument. Check the status code
-# is zero and that the output matches the stream read from
+# is zero and that the output matches the stream read from
# stdin.
test_output_expect_success()
-{
+{
_description=$1
_test=$2
[ $# -eq 2 ] || error "usage: test_output_expect_success description test <<EOF ... EOF"
_name=$(echo $_description | name_from_description)
cat > $_name.expected
- test_expect_success "$_description" "check_output $_name \"$_test\""
+ test_expect_success "$_description" "check_output $_name \"$_test\""
}
diff --git a/t/t6002-rev-list-bisect.sh b/t/t6002-rev-list-bisect.sh
index fcb3302..71cbb72 100755
--- a/t/t6002-rev-list-bisect.sh
+++ b/t/t6002-rev-list-bisect.sh
@@ -26,7 +26,7 @@
# Test if bisection size is close to half of list size within
# tolerance.
- #
+ #
_bisect_err=`expr $_list_size - $_bisection_size \* 2`
test "$_bisect_err" -lt 0 && _bisect_err=`expr 0 - $_bisect_err`
_bisect_err=`expr $_bisect_err / 2` ; # floor
@@ -116,8 +116,8 @@
test_sequence()
{
- _bisect_option=$1
-
+ _bisect_option=$1
+
test_bisection_diff 0 $_bisect_option l0 ^root
test_bisection_diff 0 $_bisect_option l1 ^root
test_bisection_diff 0 $_bisect_option l2 ^root
@@ -152,7 +152,7 @@
test_bisection_diff 0 $_bisect_option u3 ^U
test_bisection_diff 0 $_bisect_option u4 ^U
test_bisection_diff 0 $_bisect_option u5 ^U
-
+
#
# the following illustrates Linus' binary bug blatt idea.
#
diff --git a/t/t6021-merge-criss-cross.sh b/t/t6021-merge-criss-cross.sh
index 499cafb..0ab14a6 100755
--- a/t/t6021-merge-criss-cross.sh
+++ b/t/t6021-merge-criss-cross.sh
@@ -20,7 +20,7 @@
7
8
9" > file &&
-git add file &&
+git add file &&
git commit -m "Initial commit" file &&
git branch A &&
git branch B &&
diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh
index c76fccf..43aa5d0 100755
--- a/t/t6023-merge-file.sh
+++ b/t/t6023-merge-file.sh
@@ -135,4 +135,3 @@
test_expect_success "expected conflict markers" "git diff expect out"
test_done
-
diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh
index 30f6ade..03cdba5 100755
--- a/t/t6030-bisect-porcelain.sh
+++ b/t/t6030-bisect-porcelain.sh
@@ -102,4 +102,3 @@
#
#
test_done
-
diff --git a/t/t6101-rev-parse-parents.sh b/t/t6101-rev-parse-parents.sh
index b0252b9..dd6cc3a 100755
--- a/t/t6101-rev-parse-parents.sh
+++ b/t/t6101-rev-parse-parents.sh
@@ -40,4 +40,3 @@
test $start = $abbrv'
test_done
-
diff --git a/t/t9107-git-svn-migrate.sh b/t/t9107-git-svn-migrate.sh
index dc2afda..d549665 100755
--- a/t/t9107-git-svn-migrate.sh
+++ b/t/t9107-git-svn-migrate.sh
@@ -109,4 +109,3 @@
"
test_done
-
diff --git a/t/t9111/svnsync.dump b/t/t9111/svnsync.dump
index a9a46ee..499fa95 100644
--- a/t/t9111/svnsync.dump
+++ b/t/t9111/svnsync.dump
@@ -558,5 +558,3 @@
Content-length: 4
cba
-
-
diff --git a/t/test-lib.sh b/t/test-lib.sh
index dee3ad7..8bf4cf4 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -232,7 +232,7 @@
mv .git/hooks .git/hooks-disabled
cd "$owd"
}
-
+
test_done () {
trap - exit
case "$test_failure" in
diff --git a/templates/hooks--commit-msg b/templates/hooks--commit-msg
index 9b04f2d..c5cdb9d 100644
--- a/templates/hooks--commit-msg
+++ b/templates/hooks--commit-msg
@@ -19,4 +19,3 @@
echo >&2 Duplicate Signed-off-by lines.
exit 1
}
-
diff --git a/templates/hooks--post-receive b/templates/hooks--post-receive
index 190de26..b70c8fd 100644
--- a/templates/hooks--post-receive
+++ b/templates/hooks--post-receive
@@ -14,4 +14,3 @@
#. /usr/share/doc/git-core/contrib/hooks/post-receive-email
-
diff --git a/templates/hooks--pre-applypatch b/templates/hooks--pre-applypatch
index 5f56ce8..eeccc93 100644
--- a/templates/hooks--pre-applypatch
+++ b/templates/hooks--pre-applypatch
@@ -12,4 +12,3 @@
test -x "$GIT_DIR/hooks/pre-commit" &&
exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"}
:
-
diff --git a/templates/hooks--pre-commit b/templates/hooks--pre-commit
index 723a9ef..18b8730 100644
--- a/templates/hooks--pre-commit
+++ b/templates/hooks--pre-commit
@@ -68,4 +68,3 @@
}
exit($found_bad);
'
-
diff --git a/tree-walk.c b/tree-walk.c
index cbb24eb..8d4b673 100644
--- a/tree-walk.c
+++ b/tree-walk.c
@@ -206,4 +206,3 @@
free(tree);
return retval;
}
-
diff --git a/upload-pack.c b/upload-pack.c
index d3a09e7..0e881c8 100644
--- a/upload-pack.c
+++ b/upload-pack.c
@@ -678,7 +678,7 @@
break;
}
}
-
+
if (i != argc-1)
usage(upload_pack_usage);
dir = argv[i];
diff --git a/var.c b/var.c
index e585e59..4127031 100644
--- a/var.c
+++ b/var.c
@@ -67,8 +67,8 @@
val = read_var(argv[1]);
if (!val)
usage(var_usage);
-
+
printf("%s\n", val);
-
+
return 0;
}
diff --git a/xdiff-interface.c b/xdiff-interface.c
index 963bb89..e407cf1 100644
--- a/xdiff-interface.c
+++ b/xdiff-interface.c
@@ -129,5 +129,3 @@
size = FIRST_FEW_BYTES;
return !!memchr(ptr, 0, size);
}
-
-
diff --git a/xdiff/xdiff.h b/xdiff/xdiff.h
index e874a7c..9402bb0 100644
--- a/xdiff/xdiff.h
+++ b/xdiff/xdiff.h
@@ -103,4 +103,3 @@
#endif /* #ifdef __cplusplus */
#endif /* #if !defined(XDIFF_H) */
-
diff --git a/xdiff/xdiffi.c b/xdiff/xdiffi.c
index 9aeebc4..5cb7171 100644
--- a/xdiff/xdiffi.c
+++ b/xdiff/xdiffi.c
@@ -565,4 +565,3 @@
return 0;
}
-
diff --git a/xdiff/xdiffi.h b/xdiff/xdiffi.h
index 472aeae..3e099dc 100644
--- a/xdiff/xdiffi.h
+++ b/xdiff/xdiffi.h
@@ -57,4 +57,3 @@
xdemitconf_t const *xecfg);
#endif /* #if !defined(XDIFFI_H) */
-
diff --git a/xdiff/xemit.c b/xdiff/xemit.c
index e291dc7..78b1d4b 100644
--- a/xdiff/xemit.c
+++ b/xdiff/xemit.c
@@ -194,4 +194,3 @@
return 0;
}
-
diff --git a/xdiff/xemit.h b/xdiff/xemit.h
index e629417..440a739 100644
--- a/xdiff/xemit.h
+++ b/xdiff/xemit.h
@@ -31,4 +31,3 @@
#endif /* #if !defined(XEMIT_H) */
-
diff --git a/xdiff/xinclude.h b/xdiff/xinclude.h
index 04a9da8..526ccb3 100644
--- a/xdiff/xinclude.h
+++ b/xdiff/xinclude.h
@@ -40,4 +40,3 @@
#endif /* #if !defined(XINCLUDE_H) */
-
diff --git a/xdiff/xmacros.h b/xdiff/xmacros.h
index e2cd202..8ef232c 100644
--- a/xdiff/xmacros.h
+++ b/xdiff/xmacros.h
@@ -51,4 +51,3 @@
#endif /* #if !defined(XMACROS_H) */
-
diff --git a/xdiff/xprepare.c b/xdiff/xprepare.c
index 1be7b31..e87ab57 100644
--- a/xdiff/xprepare.c
+++ b/xdiff/xprepare.c
@@ -466,4 +466,3 @@
return 0;
}
-
diff --git a/xdiff/xprepare.h b/xdiff/xprepare.h
index 344c569..8fb06a5 100644
--- a/xdiff/xprepare.h
+++ b/xdiff/xprepare.h
@@ -32,4 +32,3 @@
#endif /* #if !defined(XPREPARE_H) */
-
diff --git a/xdiff/xtypes.h b/xdiff/xtypes.h
index 3593a66..2511aef 100644
--- a/xdiff/xtypes.h
+++ b/xdiff/xtypes.h
@@ -65,4 +65,3 @@
#endif /* #if !defined(XTYPES_H) */
-
diff --git a/xdiff/xutils.c b/xdiff/xutils.c
index bf91c0f..2ade97b 100644
--- a/xdiff/xutils.c
+++ b/xdiff/xutils.c
@@ -380,4 +380,3 @@
return 0;
}
-
diff --git a/xdiff/xutils.h b/xdiff/xutils.h
index 70d8b98..d5de829 100644
--- a/xdiff/xutils.h
+++ b/xdiff/xutils.h
@@ -45,4 +45,3 @@
#endif /* #if !defined(XUTILS_H) */
-
