diff --git a/Documentation/Makefile b/Documentation/Makefile
index 8fe829c..59e6ce3 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -30,6 +30,7 @@
 MAN7_TXT += gitcvs-migration.txt
 MAN7_TXT += gitdiffcore.txt
 MAN7_TXT += giteveryday.txt
+MAN7_TXT += gitfaq.txt
 MAN7_TXT += gitglossary.txt
 MAN7_TXT += gitnamespaces.txt
 MAN7_TXT += gitremote-helpers.txt
diff --git a/Documentation/gitfaq.txt b/Documentation/gitfaq.txt
new file mode 100644
index 0000000..1cf83df
--- /dev/null
+++ b/Documentation/gitfaq.txt
@@ -0,0 +1,337 @@
+gitfaq(7)
+=========
+
+NAME
+----
+gitfaq - Frequently asked questions about using Git
+
+SYNOPSIS
+--------
+gitfaq
+
+DESCRIPTION
+-----------
+
+The examples in this FAQ assume a standard POSIX shell, like `bash` or `dash`,
+and a user, A U Thor, who has the account `author` on the hosting provider
+`git.example.org`.
+
+Configuration
+-------------
+
+[[user-name]]
+What should I put in `user.name`?::
+	You should put your personal name, generally a form using a given name
+	and family name.  For example, the current maintainer of Git uses "Junio
+	C Hamano".  This will be the name portion that is stored in every commit
+	you make.
++
+This configuration doesn't have any effect on authenticating to remote services;
+for that, see `credential.username` in linkgit:git-config[1].
+
+[[http-postbuffer]]
+What does `http.postBuffer` really do?::
+	This option changes the size of the buffer that Git uses when pushing
+	data to a remote over HTTP or HTTPS.  If the data is larger than this
+	size, libcurl, which handles the HTTP support for Git, will use chunked
+	transfer encoding since it isn't known ahead of time what the size of
+	the pushed data will be.
++
+Leaving this value at the default size is fine unless you know that either the
+remote server or a proxy in the middle doesn't support HTTP/1.1 (which
+introduced the chunked transfer encoding) or is known to be broken with chunked
+data.  This is often (erroneously) suggested as a solution for generic push
+problems, but since almost every server and proxy supports at least HTTP/1.1,
+raising this value usually doesn't solve most push problems.  A server or proxy
+that didn't correctly support HTTP/1.1 and chunked transfer encoding wouldn't be
+that useful on the Internet today, since it would break lots of traffic.
++
+Note that increasing this value will increase the memory used on every relevant
+push that Git does over HTTP or HTTPS, since the entire buffer is allocated
+regardless of whether or not it is all used.  Thus, it's best to leave it at the
+default unless you are sure you need a different value.
+
+[[configure-editor]]
+How do I configure a different editor?::
+	If you haven't specified an editor specifically for Git, it will by default
+	use the editor you've configured using the `VISUAL` or `EDITOR` environment
+	variables, or if neither is specified, the system default (which is usually
+	`vi`).  Since some people find `vi` difficult to use or prefer a different
+	editor, it may be desirable to change the editor used.
++
+If you want to configure a general editor for most programs which need one, you
+can edit your shell configuration (e.g., `~/.bashrc` or `~/.zshenv`) to contain
+a line setting the `EDITOR` or `VISUAL` environment variable to an appropriate
+value.  For example, if you prefer the editor `nano`, then you could write the
+following:
++
+----
+export VISUAL=nano
+----
++
+If you want to configure an editor specifically for Git, you can either set the
+`core.editor` configuration value or the `GIT_EDITOR` environment variable.  You
+can see linkgit:git-var[1] for details on the order in which these options are
+consulted.
++
+Note that in all cases, the editor value will be passed to the shell, so any
+arguments containing spaces should be appropriately quoted.  Additionally, if
+your editor normally detaches from the terminal when invoked, you should specify
+it with an argument that makes it not do that, or else Git will not see any
+changes.  An example of a configuration addressing both of these issues on
+Windows would be the configuration `"C:\Program Files\Vim\gvim.exe" --nofork`,
+which quotes the filename with spaces and specifies the `--nofork` option to
+avoid backgrounding the process.
+
+Credentials
+-----------
+
+[[http-credentials]]
+How do I specify my credentials when pushing over HTTP?::
+	The easiest way to do this is to use a credential helper via the
+	`credential.helper` configuration.  Most systems provide a standard
+	choice to integrate with the system credential manager.  For example,
+	Git for Windows provides the `wincred` credential manager, macOS has the
+	`osxkeychain` credential manager, and Unix systems with a standard
+	desktop environment can use the `libsecret` credential manager.  All of
+	these store credentials in an encrypted store to keep your passwords or
+	tokens secure.
++
+In addition, you can use the `store` credential manager which stores in a file
+in your home directory, or the `cache` credential manager, which does not
+permanently store your credentials, but does prevent you from being prompted for
+them for a certain period of time.
++
+You can also just enter your password when prompted.  While it is possible to
+place the password (which must be percent-encoded) in the URL, this is not
+particularly secure and can lead to accidental exposure of credentials, so it is
+not recommended.
+
+[[http-credentials-environment]]
+How do I read a password or token from an environment variable?::
+	The `credential.helper` configuration option can also take an arbitrary
+	shell command that produces the credential protocol on standard output.
+	This is useful when passing credentials into a container, for example.
++
+Such a shell command can be specified by starting the option value with an
+exclamation point.  If your password or token were stored in the `GIT_TOKEN`,
+you could run the following command to set your credential helper:
++
+----
+$ git config credential.helper \
+	'!f() { echo username=author; echo "password=$GIT_TOKEN"; };f'
+----
+
+[[http-reset-credentials]]
+How do I change the password or token I've saved in my credential manager?::
+	Usually, if the password or token is invalid, Git will erase it and
+	prompt for a new one.  However, there are times when this doesn't always
+	happen.  To change the password or token, you can erase the existing
+	credentials and then Git will prompt for new ones.  To erase
+	credentials, use a syntax like the following (substituting your username
+	and the hostname):
++
+----
+$ echo url=https://author@git.example.org | git credential reject
+----
+
+[[multiple-accounts-http]]
+How do I use multiple accounts with the same hosting provider using HTTP?::
+	Usually the easiest way to distinguish between these accounts is to use
+	the username in the URL.  For example, if you have the accounts `author`
+	and `committer` on `git.example.org`, you can use the URLs
+	https://author@git.example.org/org1/project1.git and
+	https://committer@git.example.org/org2/project2.git.  This way, when you
+	use a credential helper, it will automatically try to look up the
+	correct credentials for your account.  If you already have a remote set
+	up, you can change the URL with something like `git remote set-url
+	origin https://author@git.example.org/org1/project1.git` (see
+	linkgit:git-remote[1] for details).
+
+[[multiple-accounts-ssh]]
+How do I use multiple accounts with the same hosting provider using SSH?::
+	With most hosting providers that support SSH, a single key pair uniquely
+	identifies a user.  Therefore, to use multiple accounts, it's necessary
+	to create a key pair for each account.  If you're using a reasonably
+	modern OpenSSH version, you can create a new key pair with something
+	like `ssh-keygen -t ed25519 -f ~/.ssh/id_committer`.  You can then
+	register the public key (in this case, `~/.ssh/id_committer.pub`; note
+	the `.pub`) with the hosting provider.
++
+Most hosting providers use a single SSH account for pushing; that is, all users
+push to the `git` account (e.g., `git@git.example.org`).  If that's the case for
+your provider, you can set up multiple aliases in SSH to make it clear which key
+pair to use.  For example, you could write something like the following in
+`~/.ssh/config`, substituting the proper private key file:
++
+----
+# This is the account for author on git.example.org.
+Host example_author
+	HostName git.example.org
+	User git
+	# This is the key pair registered for author with git.example.org.
+	IdentityFile ~/.ssh/id_author
+	IdentitiesOnly yes
+# This is the account for committer on git.example.org.
+Host example_committer
+	HostName git.example.org
+	User git
+	# This is the key pair registered for committer with git.example.org.
+	IdentityFile ~/.ssh/id_committer
+	IdentitiesOnly yes
+----
++
+Then, you can adjust your push URL to use `git@example_author` or
+`git@example_committer` instead of `git@example.org` (e.g., `git remote set-url
+git@example_author:org1/project1.git`).
+
+Common Issues
+-------------
+
+[[last-commit-amend]]
+I've made a mistake in the last commit.  How do I change it?::
+	You can make the appropriate change to your working tree, run `git add
+	<file>` or `git rm <file>`, as appropriate, to stage it, and then `git
+	commit --amend`.  Your change will be included in the commit, and you'll
+	be prompted to edit the commit message again; if you wish to use the
+	original message verbatim, you can use the `--no-edit` option to `git
+	commit` in addition, or just save and quit when your editor opens.
+
+[[undo-previous-change]]
+I've made a change with a bug and it's been included in the main branch.  How should I undo it?::
+	The usual way to deal with this is to use `git revert`.  This preserves
+	the history that the original change was made and was a valuable
+	contribution, but also introduces a new commit that undoes those changes
+	because the original had a problem.  The commit message of the revert
+	indicates the commit which was reverted and is usually edited to include
+	an explanation as to why the revert was made.
+
+[[ignore-tracked-files]]
+How do I ignore changes to a tracked file?::
+	Git doesn't provide a way to do this.  The reason is that if Git needs
+	to overwrite this file, such as during a checkout, it doesn't know
+	whether the changes to the file are precious and should be kept, or
+	whether they are irrelevant and can safely be destroyed.  Therefore, it
+	has to take the safe route and always preserve them.
++
+It's tempting to try to use certain features of `git update-index`, namely the
+assume-unchanged and skip-worktree bits, but these don't work properly for this
+purpose and shouldn't be used this way.
++
+If your goal is to modify a configuration file, it can often be helpful to have
+a file checked into the repository which is a template or set of defaults which
+can then be copied alongside and modified as appropriate.  This second, modified
+file is usually ignored to prevent accidentally committing it.
+
+Hooks
+-----
+
+[[restrict-with-hooks]]
+How do I use hooks to prevent users from making certain changes?::
+	The only safe place to make these changes is on the remote repository
+	(i.e., the Git server), usually in the `pre-receive` hook or in a
+	continuous integration (CI) system.  These are the locations in which
+	policy can be enforced effectively.
++
+It's common to try to use `pre-commit` hooks (or, for commit messages,
+`commit-msg` hooks) to check these things, which is great if you're working as a
+solo developer and want the tooling to help you.  However, using hooks on a
+developer machine is not effective as a policy control because a user can bypass
+these hooks with `--no-verify` without being noticed (among various other ways).
+Git assumes that the user is in control of their local repositories and doesn't
+try to prevent this or tattle on the user.
++
+In addition, some advanced users find `pre-commit` hooks to be an impediment to
+workflows that use temporary commits to stage work in progress or that create
+fixup commits, so it's better to push these kinds of checks to the server
+anyway.
+
+Cross-Platform Issues
+---------------------
+
+[[windows-text-binary]]
+I'm on Windows and my text files are detected as binary.::
+	Git works best when you store text files as UTF-8.  Many programs on
+	Windows support UTF-8, but some do not and only use the little-endian
+	UTF-16 format, which Git detects as binary.  If you can't use UTF-8 with
+	your programs, you can specify a working tree encoding that indicates
+	which encoding your files should be checked out with, while still
+	storing these files as UTF-8 in the repository.  This allows tools like
+	linkgit:git-diff[1] to work as expected, while still allowing your tools
+	to work.
++
+To do so, you can specify a linkgit:gitattributes[5] pattern with the
+`working-tree-encoding` attribute.  For example, the following pattern sets all
+C files to use UTF-16LE-BOM, which is a common encoding on Windows:
++
+----
+*.c	working-tree-encoding=UTF-16LE-BOM
+----
++
+You will need to run `git add --renormalize` to have this take effect.  Note
+that if you are making these changes on a project that is used across platforms,
+you'll probably want to make it in a per-user configuration file or in the one
+in `$GIT_DIR/info/attributes`, since making it in a `.gitattributes` file in the
+repository will apply to all users of the repository.
++
+See the following entry for information about normalizing line endings as well,
+and see linkgit:gitattributes[5] for more information about attribute files.
+
+[[windows-diff-control-m]]
+I'm on Windows and git diff shows my files as having a `^M` at the end.::
+	By default, Git expects files to be stored with Unix line endings.  As such,
+	the carriage return (`^M`) that is part of a Windows line ending is shown
+	because it is considered to be trailing whitespace.  Git defaults to showing
+	trailing whitespace only on new lines, not existing ones.
++
+You can store the files in the repository with Unix line endings and convert
+them automatically to your platform's line endings.  To do that, set the
+configuration option `core.eol` to `native` and see the following entry for
+information about how to configure files as text or binary.
++
+You can also control this behavior with the `core.whitespace` setting if you
+don't wish to remove the carriage returns from your line endings.
+
+[[recommended-storage-settings]]
+What's the recommended way to store files in Git?::
+	While Git can store and handle any file of any type, there are some
+	settings that work better than others.  In general, we recommend that
+	text files be stored in UTF-8 without a byte-order mark (BOM) with LF
+	(Unix-style) endings.  We also recommend the use of UTF-8 (again,
+	without BOM) in commit messages.  These are the settings that work best
+	across platforms and with tools such as `git diff` and `git merge`.
++
+Additionally, if you have a choice between storage formats that are text based
+or non-text based, we recommend storing files in the text format and, if
+necessary, transforming them into the other format.  For example, a text-based
+SQL dump with one record per line will work much better for diffing and merging
+than an actual database file.  Similarly, text-based formats such as Markdown
+and AsciiDoc will work better than binary formats such as Microsoft Word and
+PDF.
++
+Similarly, storing binary dependencies (e.g., shared libraries or JAR files) or
+build products in the repository is generally not recommended.  Dependencies and
+build products are best stored on an artifact or package server with only
+references, URLs, and hashes stored in the repository.
++
+We also recommend setting a linkgit:gitattributes[5] file to explicitly mark
+which files are text and which are binary.  If you want Git to guess, you can
+set the attribute `text=auto`.  For example, the following might be appropriate
+in some projects:
++
+----
+# By default, guess.
+*	text=auto
+# Mark all C files as text.
+*.c	text
+# Mark all JPEG files as binary.
+*.jpg	binary
+----
++
+These settings help tools pick the right format for output such as patches and
+result in files being checked out in the appropriate line ending for the
+platform.
+
+GIT
+---
+Part of the linkgit:git[1] suite