diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index d86196c..24c28e3 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -106,7 +106,7 @@
 	  Say yes here to build support for Atmel AT91 ADC.
 
 config EXYNOS_ADC
-	bool "Exynos ADC driver support"
+	tristate "Exynos ADC driver support"
 	depends on OF
 	help
 	  Core support for the ADC block found in the Samsung EXYNOS series
@@ -114,7 +114,7 @@
 	  this resource.
 
 config LP8788_ADC
-	bool "LP8788 ADC driver"
+	tristate "LP8788 ADC driver"
 	depends on MFD_LP8788
 	help
 	  Say yes here to build support for TI LP8788 ADC.
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index d25b262..affa93f 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -344,7 +344,7 @@
 
 	exynos_adc_hw_init(info);
 
-	ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev);
+	ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed adding child nodes\n");
 		goto err_of_populate;
@@ -353,7 +353,7 @@
 	return 0;
 
 err_of_populate:
-	device_for_each_child(&pdev->dev, NULL,
+	device_for_each_child(&indio_dev->dev, NULL,
 				exynos_adc_remove_devices);
 	regulator_disable(info->vdd);
 	clk_disable_unprepare(info->clk);
@@ -369,7 +369,7 @@
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct exynos_adc *info = iio_priv(indio_dev);
 
-	device_for_each_child(&pdev->dev, NULL,
+	device_for_each_child(&indio_dev->dev, NULL,
 				exynos_adc_remove_devices);
 	regulator_disable(info->vdd);
 	clk_disable_unprepare(info->clk);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index cb9f96b..d8ad606 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -660,6 +660,7 @@
 {
 	struct inv_mpu6050_state *st;
 	struct iio_dev *indio_dev;
+	struct inv_mpu6050_platform_data *pdata;
 	int result;
 
 	if (!i2c_check_functionality(client->adapter,
@@ -672,8 +673,10 @@
 
 	st = iio_priv(indio_dev);
 	st->client = client;
-	st->plat_data = *(struct inv_mpu6050_platform_data
-				*)dev_get_platdata(&client->dev);
+	pdata = (struct inv_mpu6050_platform_data
+			*)dev_get_platdata(&client->dev);
+	if (pdata)
+		st->plat_data = *pdata;
 	/* power is turned on inside check chip type*/
 	result = inv_check_and_setup_chip(st, id);
 	if (result)
diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
index e2b4820..017d2f8 100644
--- a/drivers/staging/iio/resolver/ad2s1200.c
+++ b/drivers/staging/iio/resolver/ad2s1200.c
@@ -107,7 +107,7 @@
 	int pn, ret = 0;
 	unsigned short *pins = spi->dev.platform_data;
 
-	for (pn = 0; pn < AD2S1200_PN; pn++)
+	for (pn = 0; pn < AD2S1200_PN; pn++) {
 		ret = devm_gpio_request_one(&spi->dev, pins[pn], GPIOF_DIR_OUT,
 					    DRV_NAME);
 		if (ret) {
@@ -115,6 +115,7 @@
 							pins[pn]);
 			return ret;
 		}
+	}
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
 		return -ENOMEM;