# SPDX-License-Identifier: 0BSD

#############################################################################
#
# CMake support for building XZ Utils
#
# The complete CMake-based build hasn't been tested much yet and
# thus it's still slightly experimental. Testing this especially
# outside GNU/Linux and Windows would be great now.
#
# A few things are still missing compared to the Autotools-based build:
#
#   - A few tests aren't CMake compatible yet and thus aren't run!
#
#   - 32-bit x86 assembly code for CRC32 and CRC64 isn't used.
#
#   - External SHA-256 code isn't supported but it's disabled by
#     default in the Autotools build too (--enable-external-sha256).
#
#   - Extra compiler warning flags aren't added by default.
#
# About CMAKE_BUILD_TYPE:
#
#   - CMake's standard choices are fine to use for production builds,
#     including "Release" and "RelWithDebInfo".
#
#     NOTE: While "Release" uses -O3 by default with some compilers,
#     this file overrides -O3 to -O2 for "Release" builds if
#     CMAKE_C_FLAGS_RELEASE is not defined by the user. At least
#     with GCC and Clang/LLVM, -O3 doesn't seem useful for this
#     package as it can result in bigger binaries without any
#     improvement in speed compared to -O2.
#
#   - Empty value (the default) is handled slightly specially: It
#     adds -DNDEBUG to disable debugging code (assert() and a few
#     other things). No optimization flags are added so an empty
#     CMAKE_BUILD_TYPE is an easy way to build with whatever
#     optimization flags one wants, and so this method is also
#     suitable for production builds.
#
#     If debugging is wanted when using empty CMAKE_BUILD_TYPE,
#     include -UNDEBUG in the CFLAGS environment variable or
#     in the CMAKE_C_FLAGS CMake variable to override -DNDEBUG.
#     With empty CMAKE_BUILD_TYPE, the -UNDEBUG option will go
#     after the -DNDEBUG option on the compiler command line and
#     thus NDEBUG will be undefined.
#
#   - Non-standard build types like "None" aren't treated specially
#     and thus won't have -DNEBUG. Such non-standard build types
#     SHOULD BE AVOIDED FOR PRODUCTION BUILDS. Or at least one
#     should remember to add -DNDEBUG.
#
# If building from xz.git instead of a release tarball, consider
# the following *before* running cmake:
#
#   - To get translated messages, install GNU gettext tools (the
#     command msgfmt is needed). Alternatively disable translations
#     by setting ENABLE_NLS=OFF.
#
#   - To get translated man pages, run po4a/update-po which requires
#     the po4a tool. The build works without this step too.
#
#   - To get Doxygen-generated liblzma API docs in HTML format,
#     run doxygen/update-doxygen which requires the doxygen tool.
#     The build works without this step too.
#
# This file provides the following installation components (if you only
# need liblzma, install only its components!):
#   - liblzma_Runtime (shared library only)
#   - liblzma_Development
#   - liblzma_Documentation (examples and Doxygen-generated API docs as HTML)
#   - xz_Runtime (xz, the symlinks, and possibly translation files)
#   - xz_Documentation (xz man pages and the symlinks)
#   - xzdec_Runtime
#   - xzdec_Documentation (xzdec *and* lzmadec man pages)
#   - lzmadec_Runtime
#   - lzmainfo_Runtime
#   - lzmainfo_Documentation (lzmainfo man pages)
#   - scripts_Runtime (xzdiff, xzgrep, xzless, xzmore)
#   - scripts_Documentation (their man pages)
#   - Documentation (generic docs like README and licenses)
#
# To find the target liblzma::liblzma from other packages, use the CONFIG
# option with find_package() to avoid a conflict with the FindLibLZMA module
# with case-insensitive file systems. For example, to require liblzma 5.2.5
# or a newer compatible version:
#
#     find_package(liblzma 5.2.5 REQUIRED CONFIG)
#     target_link_libraries(my_application liblzma::liblzma)
#
#############################################################################
#
# Author: Lasse Collin
#
#############################################################################

# NOTE: Translation support is disabled with CMake older than 3.20.
cmake_minimum_required(VERSION 3.14...3.28 FATAL_ERROR)

include(CMakePushCheckState)
include(CheckIncludeFile)
include(CheckSymbolExists)
include(CheckStructHasMember)
include(CheckCSourceCompiles)
include(cmake/tuklib_large_file_support.cmake)
include(cmake/tuklib_integer.cmake)
include(cmake/tuklib_cpucores.cmake)
include(cmake/tuklib_physmem.cmake)
include(cmake/tuklib_progname.cmake)
include(cmake/tuklib_mbstr.cmake)

set(PACKAGE_NAME "XZ Utils")
set(PACKAGE_BUGREPORT "xz@tukaani.org")
set(PACKAGE_URL "https://xz.tukaani.org/xz-utils/")

# Get the package version from version.h into PACKAGE_VERSION variable.
file(READ src/liblzma/api/lzma/version.h PACKAGE_VERSION)
string(REGEX REPLACE
"^.*\n\
#define LZMA_VERSION_MAJOR ([0-9]+)\n\
.*\
#define LZMA_VERSION_MINOR ([0-9]+)\n\
.*\
#define LZMA_VERSION_PATCH ([0-9]+)\n\
.*$"
       "\\1.\\2.\\3" PACKAGE_VERSION "${PACKAGE_VERSION}")

# With several compilers, CMAKE_BUILD_TYPE=Release uses -O3 optimization
# which results in bigger code without a clear difference in speed. If
# no user-defined CMAKE_C_FLAGS_RELEASE is present, override -O3 to -O2
# to make it possible to recommend CMAKE_BUILD_TYPE=Release.
if(NOT DEFINED CMAKE_C_FLAGS_RELEASE)
    set(OVERRIDE_O3_IN_C_FLAGS_RELEASE ON)
endif()

# Among other things, this gives us variables xz_VERSION and xz_VERSION_MAJOR.
project(xz VERSION "${PACKAGE_VERSION}" LANGUAGES C)

if(OVERRIDE_O3_IN_C_FLAGS_RELEASE)
    # Looking at CMake's source, there aren't any _FLAGS_RELEASE_INIT
    # entries where "-O3" would appear as part of some other option,
    # thus a simple search and replace should be fine.
    string(REPLACE -O3 -O2 CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE}")

    # Update the cache value while keeping its docstring unchanged.
    set_property(CACHE CMAKE_C_FLAGS_RELEASE
                 PROPERTY VALUE "${CMAKE_C_FLAGS_RELEASE}")
endif()

# We need a compiler that supports enough C99 or newer (variable-length arrays
# aren't needed, those are optional in C17). Setting CMAKE_C_STANDARD here
# makes it the default for all targets. It doesn't affect the INTERFACE so
# liblzma::liblzma won't end up with INTERFACE_COMPILE_FEATURES "c_std_99"
# (the API headers are C89 and C++ compatible).
set(CMAKE_C_STANDARD 99)
set(CMAKE_C_STANDARD_REQUIRED ON)

# On Apple OSes, don't build executables as bundles:
set(CMAKE_MACOSX_BUNDLE OFF)

# Set CMAKE_INSTALL_LIBDIR and friends. This needs to be done before
# the LOCALEDIR_DEFINITION workaround below.
include(GNUInstallDirs)

# windres from GNU binutils can be tricky with command line arguments
# that contain spaces or other funny characters. Unfortunately we need
# a space in PACKAGE_NAME. Using \x20 to encode the US-ASCII space seems
# to work in both cmd.exe and /bin/sh.
#
# However, even \x20 isn't enough in all situations, resulting in
# "syntax error" from windres. Using --use-temp-file prevents windres
# from using popen() and this seems to fix the problem.
#
# llvm-windres from Clang/LLVM 16.0.6 and older: The \x20 results
# in "XZx20Utils" in the compiled binary. The option --use-temp-file
# makes no difference.
#
# llvm-windres 17.0.0 and later: It emulates GNU windres more accurately, so
# the workarounds used with GNU windres must be used with llvm-windres too.
#
# CMake 3.27 doesn't have CMAKE_RC_COMPILER_ID so we rely on
# CMAKE_C_COMPILER_ID.
if((MINGW OR CYGWIN OR MSYS) AND (
        NOT CMAKE_C_COMPILER_ID STREQUAL "Clang" OR
        CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "17"))
    # Use workarounds with GNU windres and llvm-windres >= 17.0.0. The \x20
    # in PACKAGE_NAME_DEFINITION works with gcc and clang too so we don't need
    # to worry how to pass different flags to windres and the C compiler.
    # Keep the original PACKAGE_NAME intact for generation of liblzma.pc.
    string(APPEND CMAKE_RC_FLAGS " --use-temp-file")
    string(REPLACE " " "\\x20" PACKAGE_NAME_DEFINITION "${PACKAGE_NAME}")

    # Use octal because "Program Files" would become \x20F.
    string(REPLACE " " "\\040" LOCALEDIR_DEFINITION
           "${CMAKE_INSTALL_FULL_LOCALEDIR}")
else()
    # Elsewhere a space is safe. This also keeps things compatible with
    # EBCDIC in case CMake-based build is ever done on such a system.
    set(PACKAGE_NAME_DEFINITION "${PACKAGE_NAME}")
    set(LOCALEDIR_DEFINITION "${CMAKE_INSTALL_FULL_LOCALEDIR}")
endif()

# Definitions common to all targets:
add_compile_definitions(
    # Package info:
    PACKAGE_NAME="${PACKAGE_NAME_DEFINITION}"
    PACKAGE_BUGREPORT="${PACKAGE_BUGREPORT}"
    PACKAGE_URL="${PACKAGE_URL}"

    # Standard headers and types are available:
    HAVE_STDBOOL_H
    HAVE__BOOL
    HAVE_STDINT_H
    HAVE_INTTYPES_H

    # Always enable CRC32 since liblzma should never build without it.
    HAVE_CHECK_CRC32

    # Disable assert() checks when no build type has been specified. Non-empty
    # build types like "Release" and "Debug" handle this by default.
    $<$<CONFIG:>:NDEBUG>
)


######################
# System definitions #
######################

# _GNU_SOURCE and such definitions. This specific macro is special since
# it also adds the definitions to CMAKE_REQUIRED_DEFINITIONS.
tuklib_use_system_extensions(ALL)

# Check for large file support. It's required on some 32-bit platforms and
# even on 64-bit MinGW-w64 to get 64-bit off_t. This can be forced off on
# the CMake command line if needed: -DLARGE_FILE_SUPPORT=OFF
tuklib_large_file_support(ALL)

# This is needed by liblzma and xz.
tuklib_integer(ALL)

# This is used for liblzma.pc generation to add -lrt if needed.
set(LIBS)

# Check for clock_gettime(). Do this before checking for threading so
# that we know there if CLOCK_MONOTONIC is available.
check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME)

if(NOT HAVE_CLOCK_GETTIME)
    # With glibc <= 2.17 or Solaris 10 this needs librt.
    # Add librt for the next check for HAVE_CLOCK_GETTIME. If it is
    # found after including the library, we know that librt is required.
    list(INSERT CMAKE_REQUIRED_LIBRARIES 0 rt)
    check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME_LIBRT)

    # If it was found now, add librt to all targets and keep it in
    # CMAKE_REQUIRED_LIBRARIES for further tests too.
    if(HAVE_CLOCK_GETTIME_LIBRT)
        link_libraries(rt)
        set(LIBS "-lrt") # For liblzma.pc
    else()
        list(REMOVE_AT CMAKE_REQUIRED_LIBRARIES 0)
    endif()
endif()

if(HAVE_CLOCK_GETTIME OR HAVE_CLOCK_GETTIME_LIBRT)
    add_compile_definitions(HAVE_CLOCK_GETTIME)

    # Check if CLOCK_MONOTONIC is available for clock_gettime().
    check_symbol_exists(CLOCK_MONOTONIC time.h HAVE_CLOCK_MONOTONIC)
    tuklib_add_definition_if(ALL HAVE_CLOCK_MONOTONIC)
endif()

# Translation support requires CMake 3.20 because it added the Intl::Intl
# target so we don't need to play with the individual variables.
#
# The defintion ENABLE_NLS is added only to those targets that use it, thus
# it's not done here. (xz has translations, xzdec doesn't.)
if(CMAKE_VERSION VERSION_GREATER_EQUAL "3.20")
    find_package(Intl)
    find_package(Gettext)
    if(Intl_FOUND)
        option(ENABLE_NLS "Native Language Support (translated messages)" ON)

        # The *installed* name of the translation files is "xz.mo".
        set(TRANSLATION_DOMAIN "xz")
    endif()
endif()

# Options for new enough GCC or Clang on any arch or operating system:
if(CMAKE_C_COMPILER_ID MATCHES GNU|Clang)
    # configure.ac has a long list but it won't be copied here:
    add_compile_options(-Wall -Wextra)
endif()


#############################################################################
# liblzma
#############################################################################

option(BUILD_SHARED_LIBS "Build liblzma as a shared library instead of static")

add_library(liblzma
    src/common/mythread.h
    src/common/sysdefs.h
    src/common/tuklib_common.h
    src/common/tuklib_config.h
    src/common/tuklib_integer.h
    src/common/tuklib_physmem.c
    src/common/tuklib_physmem.h
    src/liblzma/api/lzma.h
    src/liblzma/api/lzma/base.h
    src/liblzma/api/lzma/bcj.h
    src/liblzma/api/lzma/block.h
    src/liblzma/api/lzma/check.h
    src/liblzma/api/lzma/container.h
    src/liblzma/api/lzma/delta.h
    src/liblzma/api/lzma/filter.h
    src/liblzma/api/lzma/hardware.h
    src/liblzma/api/lzma/index.h
    src/liblzma/api/lzma/index_hash.h
    src/liblzma/api/lzma/lzma12.h
    src/liblzma/api/lzma/stream_flags.h
    src/liblzma/api/lzma/version.h
    src/liblzma/api/lzma/vli.h
    src/liblzma/check/check.c
    src/liblzma/check/check.h
    src/liblzma/check/crc_common.h
    src/liblzma/check/crc_x86_clmul.h
    src/liblzma/check/crc32_arm64.h
    src/liblzma/common/block_util.c
    src/liblzma/common/common.c
    src/liblzma/common/common.h
    src/liblzma/common/easy_preset.c
    src/liblzma/common/easy_preset.h
    src/liblzma/common/filter_common.c
    src/liblzma/common/filter_common.h
    src/liblzma/common/hardware_physmem.c
    src/liblzma/common/index.c
    src/liblzma/common/index.h
    src/liblzma/common/memcmplen.h
    src/liblzma/common/stream_flags_common.c
    src/liblzma/common/stream_flags_common.h
    src/liblzma/common/string_conversion.c
    src/liblzma/common/vli_size.c
)

target_include_directories(liblzma PRIVATE
    src/liblzma/api
    src/liblzma/common
    src/liblzma/check
    src/liblzma/lz
    src/liblzma/rangecoder
    src/liblzma/lzma
    src/liblzma/delta
    src/liblzma/simple
    src/common
)


######################
# Size optimizations #
######################

option(ENABLE_SMALL "Reduce code size at expense of speed. \
This may be useful together with CMAKE_BUILD_TYPE=MinSizeRel.")

if(ENABLE_SMALL)
    add_compile_definitions(HAVE_SMALL)
endif()


##########
# Checks #
##########

set(ADDITIONAL_SUPPORTED_CHECKS crc64 sha256)

set(ADDITIONAL_CHECK_TYPES "${ADDITIONAL_SUPPORTED_CHECKS}" CACHE STRING
    "Additional check types to support (crc32 is always built)")

foreach(CHECK IN LISTS ADDITIONAL_CHECK_TYPES)
    if(NOT CHECK IN_LIST ADDITIONAL_SUPPORTED_CHECKS)
        message(FATAL_ERROR "'${CHECK}' is not a supported check type")
    endif()
endforeach()

if(ENABLE_SMALL)
    target_sources(liblzma PRIVATE src/liblzma/check/crc32_small.c)
else()
    target_sources(liblzma PRIVATE
        src/liblzma/check/crc32_fast.c
        src/liblzma/check/crc32_table.c
        src/liblzma/check/crc32_table_be.h
        src/liblzma/check/crc32_table_le.h
    )
endif()

if("crc64" IN_LIST ADDITIONAL_CHECK_TYPES)
    add_compile_definitions("HAVE_CHECK_CRC64")

    if(ENABLE_SMALL)
        target_sources(liblzma PRIVATE src/liblzma/check/crc64_small.c)
    else()
        target_sources(liblzma PRIVATE
            src/liblzma/check/crc64_fast.c
            src/liblzma/check/crc64_table.c
            src/liblzma/check/crc64_table_be.h
            src/liblzma/check/crc64_table_le.h
        )
    endif()
endif()

if("sha256" IN_LIST ADDITIONAL_CHECK_TYPES)
    add_compile_definitions("HAVE_CHECK_SHA256")
    target_sources(liblzma PRIVATE src/liblzma/check/sha256.c)
endif()


#################
# Match finders #
#################

set(SUPPORTED_MATCH_FINDERS hc3 hc4 bt2 bt3 bt4)

set(MATCH_FINDERS "${SUPPORTED_MATCH_FINDERS}" CACHE STRING
    "Match finders to support (at least one is required for LZMA1 or LZMA2)")

foreach(MF IN LISTS MATCH_FINDERS)
    if(MF IN_LIST SUPPORTED_MATCH_FINDERS)
        string(TOUPPER "${MF}" MF_UPPER)
        add_compile_definitions("HAVE_MF_${MF_UPPER}")
    else()
        message(FATAL_ERROR "'${MF}' is not a supported match finder")
    endif()
endforeach()


#############
# Threading #
#############

# Supported threading methods:
# ON    - autodetect the best threading method. The autodetection will
#         prefer Windows threading (win95 or vista) over posix if both are
#         available. vista threads will be used over win95 unless it is a
#         32-bit build.
# OFF   - Disable threading.
# posix - Use posix threading (pthreads), or throw an error if not available.
# win95 - Use Windows win95 threading, or throw an error if not available.
# vista - Use Windows vista threading, or throw an error if not available.
set(SUPPORTED_THREADING_METHODS ON OFF posix win95 vista)

set(ENABLE_THREADS ON CACHE STRING
    "Threading method: Set to 'ON' to autodetect, 'OFF' to disable threading.")

# Create dropdown in CMake GUI since only 1 threading method is possible
# to select in a build.
set_property(CACHE ENABLE_THREADS
             PROPERTY STRINGS "${SUPPORTED_THREADING_METHODS}")

# This is a flag variable set when win95 threads are used. We must ensure
# the combination of enable_small and win95 threads is not used without a
# compiler supporting attribute __constructor__.
set(USE_WIN95_THREADS OFF)

# This is a flag variable set when posix threads (pthreads) are used.
# It's needed when creating liblzma-config.cmake where dependency on
# Threads::Threads is only needed with pthreads.
set(USE_POSIX_THREADS OFF)

if(NOT ENABLE_THREADS IN_LIST SUPPORTED_THREADING_METHODS)
    message(FATAL_ERROR "'${ENABLE_THREADS}' is not a supported "
                        "threading method")
endif()

if(ENABLE_THREADS)
    # Also set THREADS_PREFER_PTHREAD_FLAG since the flag has no effect
    # for Windows threading.
    set(THREADS_PREFER_PTHREAD_FLAG TRUE)
    find_package(Threads REQUIRED)

    # If both Windows and posix threading are available, prefer Windows.
    # Note that on Cygwin CMAKE_USE_WIN32_THREADS_INIT is false.
    if(CMAKE_USE_WIN32_THREADS_INIT AND NOT ENABLE_THREADS STREQUAL "posix")
        if(ENABLE_THREADS STREQUAL "win95"
                OR (ENABLE_THREADS STREQUAL "ON"
                    AND CMAKE_SIZEOF_VOID_P EQUAL 4))
            # Use Windows 95 (and thus XP) compatible threads.
            # This avoids use of features that were added in
            # Windows Vista. This is used for 32-bit x86 builds for
            # compatibility reasons since it makes no measurable difference
            # in performance compared to Vista threads.
            set(USE_WIN95_THREADS ON)
            add_compile_definitions(MYTHREAD_WIN95)
        else()
            add_compile_definitions(MYTHREAD_VISTA)
        endif()
    elseif(CMAKE_USE_PTHREADS_INIT)
        if(ENABLE_THREADS STREQUAL "posix" OR ENABLE_THREADS STREQUAL "ON")
            # The threading library only needs to be explicitly linked
            # for posix threads, so this is needed for creating
            # liblzma-config.cmake later.
            set(USE_POSIX_THREADS ON)

            target_link_libraries(liblzma Threads::Threads)
            add_compile_definitions(MYTHREAD_POSIX)

            # Check if pthread_condattr_setclock() exists to
            # use CLOCK_MONOTONIC.
            if(HAVE_CLOCK_MONOTONIC)
                list(INSERT CMAKE_REQUIRED_LIBRARIES 0
                     "${CMAKE_THREAD_LIBS_INIT}")
                check_symbol_exists(pthread_condattr_setclock pthread.h
                                    HAVE_PTHREAD_CONDATTR_SETCLOCK)
                tuklib_add_definition_if(ALL HAVE_PTHREAD_CONDATTR_SETCLOCK)
            endif()
        else()
            message(SEND_ERROR
                    "Windows threading method was requested but a compatible "
                    "library could not be found")
        endif()
    else()
        message(SEND_ERROR "No supported threading library found")
    endif()

    target_sources(liblzma PRIVATE
        src/common/tuklib_cpucores.c
        src/common/tuklib_cpucores.h
        src/liblzma/common/hardware_cputhreads.c
        src/liblzma/common/outqueue.c
        src/liblzma/common/outqueue.h
    )
endif()


############
# Encoders #
############

set(SIMPLE_FILTERS
    x86
    arm
    armthumb
    arm64
    powerpc
    ia64
    sparc
    riscv
)

# The SUPPORTED_FILTERS are shared between Encoders and Decoders
# since only lzip does not appear in both lists. lzip is a special
# case anyway, so it is handled separately in the Decoders section.
set(SUPPORTED_FILTERS
    lzma1
    lzma2
    delta
    "${SIMPLE_FILTERS}"
)

set(ENCODERS "${SUPPORTED_FILTERS}" CACHE STRING "Encoders to support")

# If LZMA2 is enabled, then LZMA1 must also be enabled.
if(NOT "lzma1" IN_LIST ENCODERS AND "lzma2" IN_LIST ENCODERS)
    message(FATAL_ERROR "LZMA2 encoder requires that LZMA1 is also enabled")
endif()

# If LZMA1 is enabled, then at least one match finder must be enabled.
if(MATCH_FINDERS STREQUAL "" AND "lzma1" IN_LIST ENCODERS)
    message(FATAL_ERROR "At least 1 match finder is required for an "
                        "LZ-based encoder")
endif()

set(HAVE_DELTA_CODER OFF)
set(SIMPLE_ENCODERS OFF)
set(HAVE_ENCODERS OFF)

foreach(ENCODER IN LISTS ENCODERS)
    if(ENCODER IN_LIST SUPPORTED_FILTERS)
        set(HAVE_ENCODERS ON)

        if(NOT SIMPLE_ENCODERS AND ENCODER IN_LIST SIMPLE_FILTERS)
            set(SIMPLE_ENCODERS ON)
        endif()

        string(TOUPPER "${ENCODER}" ENCODER_UPPER)
        add_compile_definitions("HAVE_ENCODER_${ENCODER_UPPER}")
    else()
        message(FATAL_ERROR "'${ENCODER}' is not a supported encoder")
    endif()
endforeach()

if(HAVE_ENCODERS)
    add_compile_definitions(HAVE_ENCODERS)

    target_sources(liblzma PRIVATE
        src/liblzma/common/alone_encoder.c
        src/liblzma/common/block_buffer_encoder.c
        src/liblzma/common/block_buffer_encoder.h
        src/liblzma/common/block_encoder.c
        src/liblzma/common/block_encoder.h
        src/liblzma/common/block_header_encoder.c
        src/liblzma/common/easy_buffer_encoder.c
        src/liblzma/common/easy_encoder.c
        src/liblzma/common/easy_encoder_memusage.c
        src/liblzma/common/filter_buffer_encoder.c
        src/liblzma/common/filter_encoder.c
        src/liblzma/common/filter_encoder.h
        src/liblzma/common/filter_flags_encoder.c
        src/liblzma/common/index_encoder.c
        src/liblzma/common/index_encoder.h
        src/liblzma/common/stream_buffer_encoder.c
        src/liblzma/common/stream_encoder.c
        src/liblzma/common/stream_flags_encoder.c
        src/liblzma/common/vli_encoder.c
    )

    if(ENABLE_THREADS)
        target_sources(liblzma PRIVATE
            src/liblzma/common/stream_encoder_mt.c
        )
    endif()

    if(SIMPLE_ENCODERS)
        target_sources(liblzma PRIVATE
            src/liblzma/simple/simple_encoder.c
            src/liblzma/simple/simple_encoder.h
        )
    endif()

    if("lzma1" IN_LIST ENCODERS)
        target_sources(liblzma PRIVATE
            src/liblzma/lzma/lzma_encoder.c
            src/liblzma/lzma/lzma_encoder.h
            src/liblzma/lzma/lzma_encoder_optimum_fast.c
            src/liblzma/lzma/lzma_encoder_optimum_normal.c
            src/liblzma/lzma/lzma_encoder_private.h
            src/liblzma/lzma/fastpos.h
            src/liblzma/lz/lz_encoder.c
            src/liblzma/lz/lz_encoder.h
            src/liblzma/lz/lz_encoder_hash.h
            src/liblzma/lz/lz_encoder_hash_table.h
            src/liblzma/lz/lz_encoder_mf.c
            src/liblzma/rangecoder/price.h
            src/liblzma/rangecoder/price_table.c
            src/liblzma/rangecoder/range_encoder.h
        )

        if(NOT ENABLE_SMALL)
            target_sources(liblzma PRIVATE src/liblzma/lzma/fastpos_table.c)
        endif()
    endif()

    if("lzma2" IN_LIST ENCODERS)
        target_sources(liblzma PRIVATE
            src/liblzma/lzma/lzma2_encoder.c
            src/liblzma/lzma/lzma2_encoder.h
        )
    endif()

    if("delta" IN_LIST ENCODERS)
        set(HAVE_DELTA_CODER ON)
        target_sources(liblzma PRIVATE
            src/liblzma/delta/delta_encoder.c
            src/liblzma/delta/delta_encoder.h
        )
    endif()
endif()


############
# Decoders #
############

set(DECODERS "${SUPPORTED_FILTERS}" CACHE STRING "Decoders to support")

set(SIMPLE_DECODERS OFF)
set(HAVE_DECODERS OFF)

foreach(DECODER IN LISTS DECODERS)
    if(DECODER IN_LIST SUPPORTED_FILTERS)
        set(HAVE_DECODERS ON)

        if(NOT SIMPLE_DECODERS AND DECODER IN_LIST SIMPLE_FILTERS)
            set(SIMPLE_DECODERS ON)
        endif()

        string(TOUPPER "${DECODER}" DECODER_UPPER)
        add_compile_definitions("HAVE_DECODER_${DECODER_UPPER}")
    else()
        message(FATAL_ERROR "'${DECODER}' is not a supported decoder")
    endif()
endforeach()

if(HAVE_DECODERS)
    add_compile_definitions(HAVE_DECODERS)

    target_sources(liblzma PRIVATE
        src/liblzma/common/alone_decoder.c
        src/liblzma/common/alone_decoder.h
        src/liblzma/common/auto_decoder.c
        src/liblzma/common/block_buffer_decoder.c
        src/liblzma/common/block_decoder.c
        src/liblzma/common/block_decoder.h
        src/liblzma/common/block_header_decoder.c
        src/liblzma/common/easy_decoder_memusage.c
        src/liblzma/common/file_info.c
        src/liblzma/common/filter_buffer_decoder.c
        src/liblzma/common/filter_decoder.c
        src/liblzma/common/filter_decoder.h
        src/liblzma/common/filter_flags_decoder.c
        src/liblzma/common/index_decoder.c
        src/liblzma/common/index_decoder.h
        src/liblzma/common/index_hash.c
        src/liblzma/common/stream_buffer_decoder.c
        src/liblzma/common/stream_decoder.c
        src/liblzma/common/stream_flags_decoder.c
        src/liblzma/common/stream_decoder.h
        src/liblzma/common/vli_decoder.c
    )

    if(ENABLE_THREADS)
        target_sources(liblzma PRIVATE
            src/liblzma/common/stream_decoder_mt.c
        )
    endif()

    if(SIMPLE_DECODERS)
        target_sources(liblzma PRIVATE
            src/liblzma/simple/simple_decoder.c
            src/liblzma/simple/simple_decoder.h
        )
    endif()

    if("lzma1" IN_LIST DECODERS)
        target_sources(liblzma PRIVATE
            src/liblzma/lzma/lzma_decoder.c
            src/liblzma/lzma/lzma_decoder.h
            src/liblzma/rangecoder/range_decoder.h
            src/liblzma/lz/lz_decoder.c
            src/liblzma/lz/lz_decoder.h
        )
    endif()

    if("lzma2" IN_LIST DECODERS)
        target_sources(liblzma PRIVATE
            src/liblzma/lzma/lzma2_decoder.c
            src/liblzma/lzma/lzma2_decoder.h
        )
    endif()

    if("delta" IN_LIST DECODERS)
        set(HAVE_DELTA_CODER ON)
        target_sources(liblzma PRIVATE
            src/liblzma/delta/delta_decoder.c
            src/liblzma/delta/delta_decoder.h
        )
    endif()
endif()

# Some sources must appear if the filter is configured as either
# an encoder or decoder.
if("lzma1" IN_LIST ENCODERS OR "lzma1" IN_LIST DECODERS)
    target_sources(liblzma PRIVATE
        src/liblzma/rangecoder/range_common.h
        src/liblzma/lzma/lzma_encoder_presets.c
        src/liblzma/lzma/lzma_common.h
    )
endif()

if(HAVE_DELTA_CODER)
    target_sources(liblzma PRIVATE
        src/liblzma/delta/delta_common.c
        src/liblzma/delta/delta_common.h
        src/liblzma/delta/delta_private.h
    )
endif()

if(SIMPLE_ENCODERS OR SIMPLE_DECODERS)
    target_sources(liblzma PRIVATE
        src/liblzma/simple/simple_coder.c
        src/liblzma/simple/simple_coder.h
        src/liblzma/simple/simple_private.h
    )
endif()

foreach(SIMPLE_CODER IN LISTS SIMPLE_FILTERS)
    if(SIMPLE_CODER IN_LIST ENCODERS OR SIMPLE_CODER IN_LIST DECODERS)
        target_sources(liblzma PRIVATE "src/liblzma/simple/${SIMPLE_CODER}.c")
    endif()
endforeach()


#############
# MicroLZMA #
#############

option(MICROLZMA_ENCODER
       "MicroLZMA encoder (needed by specific applications only)" ON)

option(MICROLZMA_DECODER
       "MicroLZMA decoder (needed by specific applications only)" ON)

if(MICROLZMA_ENCODER)
    if(NOT "lzma1" IN_LIST ENCODERS)
        message(FATAL_ERROR "The LZMA1 encoder is required to support the "
                            "MicroLZMA encoder")
    endif()

    target_sources(liblzma PRIVATE src/liblzma/common/microlzma_encoder.c)
endif()

if(MICROLZMA_DECODER)
    if(NOT "lzma1" IN_LIST DECODERS)
        message(FATAL_ERROR "The LZMA1 decoder is required to support the "
                            "MicroLZMA decoder")
    endif()

    target_sources(liblzma PRIVATE src/liblzma/common/microlzma_decoder.c)
endif()

if (MICROLZMA_ENCODER OR MICROLZMA_DECODER)
    add_compile_definitions(HAVE_MICROLZMA)
endif()


#############################
# lzip (.lz) format support #
#############################

option(LZIP_DECODER "Support lzip decoder" ON)

if(LZIP_DECODER)
    # If lzip decoder support is requested, make sure LZMA1 decoder is enabled.
    if(NOT "lzma1" IN_LIST DECODERS)
        message(FATAL_ERROR "The LZMA1 decoder is required to support the "
                            "lzip decoder")
    endif()

    add_compile_definitions(HAVE_LZIP_DECODER)

    target_sources(liblzma PRIVATE
        src/liblzma/common/lzip_decoder.c
        src/liblzma/common/lzip_decoder.h
    )
endif()


##############
# Sandboxing #
##############

# ON        Use sandboxing if a supported method is available in the OS.
# OFF       Disable sandboxing.
# capsicum  Require Capsicum (FreeBSD >= 10.2) and fail if not found.
# pledge    Require pledge(2) (OpenBSD >= 5.9) and fail if not found.
# landlock  Require Landlock (Linux >= 5.13) and fail if not found.
set(SUPPORTED_SANDBOX_METHODS ON OFF capsicum pledge landlock)

set(ENABLE_SANDBOX ON CACHE STRING
    "Sandboxing method to use in 'xz', 'xzdec', and 'lzmadec'")

set_property(CACHE ENABLE_SANDBOX
                PROPERTY STRINGS "${SUPPORTED_SANDBOX_METHODS}")

if(NOT ENABLE_SANDBOX IN_LIST SUPPORTED_SANDBOX_METHODS)
    message(FATAL_ERROR "'${ENABLE_SANDBOX}' is not a supported "
                        "sandboxing method")
endif()

# When autodetecting, the search order is fixed and we must not find
# more than one method.
if(ENABLE_SANDBOX STREQUAL "OFF")
    set(SANDBOX_FOUND ON)
else()
    set(SANDBOX_FOUND OFF)
endif()

# Since xz and xzdec can both use sandboxing, the compile definition needed
# to use the sandbox must be added to both targets.
set(SANDBOX_COMPILE_DEFINITION OFF)

# Sandboxing: Capsicum
if(NOT SANDBOX_FOUND AND ENABLE_SANDBOX MATCHES "^ON$|^capsicum$")
    check_symbol_exists(cap_rights_limit sys/capsicum.h
                        HAVE_CAP_RIGHTS_LIMIT)
    if(HAVE_CAP_RIGHTS_LIMIT)
        set(SANDBOX_COMPILE_DEFINITION "HAVE_CAP_RIGHTS_LIMIT")
        set(SANDBOX_FOUND ON)
    endif()
endif()

# Sandboxing: pledge(2)
if(NOT SANDBOX_FOUND AND ENABLE_SANDBOX MATCHES "^ON$|^pledge$")
    check_symbol_exists(pledge unistd.h HAVE_PLEDGE)
    if(HAVE_PLEDGE)
        set(SANDBOX_COMPILE_DEFINITION "HAVE_PLEDGE")
        set(SANDBOX_FOUND ON)
    endif()
endif()

# Sandboxing: Landlock
if(NOT SANDBOX_FOUND AND ENABLE_SANDBOX MATCHES "^ON$|^landlock$")
    check_include_file(linux/landlock.h HAVE_LINUX_LANDLOCK_H)

    if(HAVE_LINUX_LANDLOCK_H)
        set(SANDBOX_COMPILE_DEFINITION "HAVE_LINUX_LANDLOCK_H")
        set(SANDBOX_FOUND ON)

        # Of our three sandbox methods, only Landlock is incompatible
        # with -fsanitize. FreeBSD 13.2 with Capsicum was tested with
        # -fsanitize=address,undefined and had no issues. OpenBSD (as
        # of version 7.4) has minimal support for process instrumentation.
        # OpenBSD does not distribute the additional libraries needed
        # (libasan, libubsan, etc.) with GCC or Clang needed for runtime
        # sanitization support and instead only support
        # -fsanitize-minimal-runtime for minimal undefined behavior
        # sanitization. This minimal support is compatible with our use
        # of the Pledge sandbox. So only Landlock will result in a
        # build that cannot compress or decompress a single file to
        # standard out.
        if(CMAKE_C_FLAGS MATCHES "-fsanitize=")
            message(SEND_ERROR
                    "CMAKE_C_FLAGS or the environment variable CFLAGS "
                    "contains '-fsanitize=' which is incompatible "
                    "with Landlock sandboxing. Use -DENABLE_SANDBOX=OFF "
                    "as an argument to 'cmake' when using '-fsanitize'.")
        endif()
    endif()
endif()

if(NOT SANDBOX_FOUND AND NOT ENABLE_SANDBOX MATCHES "^ON$|^OFF$")
    message(SEND_ERROR "ENABLE_SANDBOX=${ENABLE_SANDBOX} was used but "
                        "support for the sandboxing method wasn't found.")
endif()

###

# Put the tuklib functions under the lzma_ namespace.
target_compile_definitions(liblzma PRIVATE TUKLIB_SYMBOL_PREFIX=lzma_)
tuklib_cpucores(liblzma)
tuklib_physmem(liblzma)

# While liblzma can be built without tuklib_cpucores or tuklib_physmem
# modules, the liblzma API functions lzma_cputhreads() and lzma_physmem()
# will then be useless (which isn't too bad but still unfortunate). Since
# I expect the CMake-based builds to be only used on systems that are
# supported by these tuklib modules, problems with these tuklib modules
# are considered a hard error for now. This hopefully helps to catch bugs
# in the CMake versions of the tuklib checks.
if(NOT TUKLIB_CPUCORES_FOUND OR NOT TUKLIB_PHYSMEM_FOUND)
    # Use SEND_ERROR instead of FATAL_ERROR. If someone reports a bug,
    # seeing the results of the remaining checks can be useful too.
    message(SEND_ERROR
            "tuklib_cpucores() or tuklib_physmem() failed. "
            "Unless you really are building for a system where these "
            "modules are not supported (unlikely), this is a bug in the "
            "included cmake/tuklib_*.cmake files that should be fixed. "
            "To build anyway, edit this CMakeLists.txt to ignore this error.")
endif()

# Check for __attribute__((__constructor__)) support.
# This needs -Werror because some compilers just warn
# about this being unsupported.
cmake_push_check_state()
set(CMAKE_REQUIRED_FLAGS "-Werror")
check_c_source_compiles("
        __attribute__((__constructor__))
        static void my_constructor_func(void) { return; }
        int main(void) { return 0; }
    "
    HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
cmake_pop_check_state()
tuklib_add_definition_if(liblzma HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)

# The Win95 threading lacks a thread-safe one-time initialization function.
# The one-time initialization is needed for crc32_small.c and crc64_small.c
# create the CRC tables. So if small mode is enabled, the threading mode is
# win95, and the compiler does not support attribute constructor, then we
# would end up with a multithreaded build that is thread-unsafe. As a
# result this configuration is not allowed.
if(USE_WIN95_THREADS AND ENABLE_SMALL AND NOT HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR)
    message(SEND_ERROR "Threading method win95 and ENABLE_SMALL "
                        "cannot be used at the same time with a compiler "
                        "that doesn't support "
                        "__attribute__((__constructor__))")
endif()


# Check for __attribute__((__ifunc__())) support.
# Supported values for USE_ATTR_IFUNC:
#
# auto (default) - Detect ifunc support with a compile test.
# ON             - Always enable ifunc.
# OFF            - Disable ifunc usage.
set(USE_ATTR_IFUNC "auto" CACHE STRING "Use __attribute__((__ifunc__())).")

set(SUPPORTED_USE_ATTR_IFUNC auto ON OFF)

if(NOT USE_ATTR_IFUNC IN_LIST SUPPORTED_USE_ATTR_IFUNC)
    message(FATAL_ERROR "'${USE_ATTR_IFUNC}' is not a supported value for"
                        "USE_ATTR_IFUNC")
endif()

# When USE_ATTR_IFUNC is 'auto', allow the use of __attribute__((__ifunc__()))
# if compiler support is detected and we are building for GNU/Linux (glibc)
# or FreeBSD. uClibc and musl don't support ifunc in their dynamic linkers
# but some compilers still accept the attribute when compiling for these
# C libraries, which results in broken binaries. That's why we need to
# check which libc is being used.
if(USE_ATTR_IFUNC STREQUAL "auto")
    cmake_push_check_state()
    set(CMAKE_REQUIRED_FLAGS "-Werror")

    check_c_source_compiles("
            /*
             * Force a compilation error when not using glibc on Linux
             * or if we are not using FreeBSD. uClibc will define
             * __GLIBC__ but does not support ifunc, so we must have
             * an extra check to disable with uClibc.
             */
            #if defined(__linux__)
            #   include <features.h>
            #   if !defined(__GLIBC__) || defined(__UCLIBC__)
            compile error
            #   endif
            #elif !defined(__FreeBSD__)
            compile error
            #endif

            static void func(void) { return; }
            static void (*resolve_func(void)) (void) { return func; }
            void func_ifunc(void)
                    __attribute__((__ifunc__(\"resolve_func\")));
            int main(void) { return 0; }
            /*
             * 'clang -Wall' incorrectly warns that resolve_func is
             * unused (-Wunused-function). Correct assembly output is
             * still produced. This problem exists at least in Clang
             * versions 4 to 17. The following silences the bogus warning:
             */
            void make_clang_quiet(void);
            void make_clang_quiet(void) { resolve_func()(); }
        "
        SYSTEM_SUPPORTS_IFUNC)

        cmake_pop_check_state()
endif()

if(USE_ATTR_IFUNC STREQUAL "ON" OR SYSTEM_SUPPORTS_IFUNC)
    tuklib_add_definitions(liblzma HAVE_FUNC_ATTRIBUTE_IFUNC)

    if(CMAKE_C_FLAGS MATCHES "-fsanitize=")
        message(SEND_ERROR
                "CMAKE_C_FLAGS or the environment variable CFLAGS "
                "contains '-fsanitize=' which is incompatible "
                "with ifunc. Use -DUSE_ATTR_IFUNC=OFF "
                "as an argument to 'cmake' when using '-fsanitize'.")
    endif()
endif()

# cpuid.h
check_include_file(cpuid.h HAVE_CPUID_H)
tuklib_add_definition_if(liblzma HAVE_CPUID_H)

# immintrin.h:
check_include_file(immintrin.h HAVE_IMMINTRIN_H)
if(HAVE_IMMINTRIN_H)
    target_compile_definitions(liblzma PRIVATE HAVE_IMMINTRIN_H)

    # SSE2 intrinsics:
    check_c_source_compiles("
            #include <immintrin.h>
            int main(void)
            {
                __m128i x = { 0 };
                _mm_movemask_epi8(x);
                return 0;
            }
        "
        HAVE__MM_MOVEMASK_EPI8)
    tuklib_add_definition_if(liblzma HAVE__MM_MOVEMASK_EPI8)

    # CLMUL intrinsic:
    option(ALLOW_CLMUL_CRC "Allow carryless multiplication for CRC \
calculation if supported by the system" ON)

    if(ALLOW_CLMUL_CRC)
        check_c_source_compiles("
                #include <immintrin.h>
                #if defined(__e2k__) && __iset__ < 6
                #   error
                #endif
                #if (defined(__GNUC__) || defined(__clang__)) \
                        && !defined(__EDG__)
                __attribute__((__target__(\"ssse3,sse4.1,pclmul\")))
                #endif
                __m128i my_clmul(__m128i a)
                {
                    const __m128i b = _mm_set_epi64x(1, 2);
                    return _mm_clmulepi64_si128(a, b, 0);
                }
                int main(void) { return 0; }
            "
            HAVE_USABLE_CLMUL)
        tuklib_add_definition_if(liblzma HAVE_USABLE_CLMUL)
    endif()
endif()

# ARM64 C Language Extensions define CRC32 functions in arm_acle.h.
# These are supported by at least GCC and Clang which both need
# __attribute__((__target__("+crc"))), unless the needed compiler flags
# are used to support the CRC instruction.
option(ALLOW_ARM64_CRC32 "Allow ARM64 CRC32 instruction if supported by \
the system" ON)

if(ALLOW_ARM64_CRC32)
    check_c_source_compiles("
            #include <stdint.h>

            #ifndef _MSC_VER
            #include <arm_acle.h>
            #endif

            #if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__)
            __attribute__((__target__(\"+crc\")))
            #endif
            uint32_t my_crc(uint32_t a, uint64_t b)
            {
                return __crc32d(a, b);
            }
            int main(void) { return 0; }
        "
        HAVE_ARM64_CRC32)

    if(HAVE_ARM64_CRC32)
        target_compile_definitions(liblzma PRIVATE HAVE_ARM64_CRC32)

        # Check for ARM64 CRC32 instruction runtime detection.
        # getauxval() is supported on Linux.
        check_symbol_exists(getauxval sys/auxv.h HAVE_GETAUXVAL)
        tuklib_add_definition_if(liblzma HAVE_GETAUXVAL)

        # elf_aux_info() is supported on FreeBSD.
        check_symbol_exists(elf_aux_info sys/auxv.h HAVE_ELF_AUX_INFO)
        tuklib_add_definition_if(liblzma HAVE_ELF_AUX_INFO)

        # sysctlbyname("hw.optional.armv8_crc32", ...) is supported on Darwin
        # (macOS, iOS, etc.). Note that sysctlbyname() is supported on FreeBSD,
        # NetBSD, and possibly others too but the string is specific to
        # Apple OSes. The C code is responsible for checking
        # defined(__APPLE__) before using
        # sysctlbyname("hw.optional.armv8_crc32", ...).
        check_symbol_exists(sysctlbyname sys/sysctl.h HAVE_SYSCTLBYNAME)
        tuklib_add_definition_if(liblzma HAVE_SYSCTLBYNAME)
    endif()
endif()


# Symbol visibility support:
#
# The C_VISIBILITY_PRESET property takes care of adding the compiler
# option -fvisibility=hidden (or equivalent) if and only if it is supported.
#
# HAVE_VISIBILITY should always be defined to 0 or 1. It tells liblzma
# if __attribute__((__visibility__("default")))
# and __attribute__((__visibility__("hidden"))) are supported.
# Those are useful only when the compiler supports -fvisibility=hidden
# or such option so HAVE_VISIBILITY should be 1 only when both option and
# the attribute support are present. HAVE_VISIBILITY is ignored on Windows
# and Cygwin by the liblzma C code; __declspec(dllexport) is used instead.
#
# CMake's GenerateExportHeader module is too fancy since liblzma already
# has the necessary macros. Instead, check CMake's internal variable
# CMAKE_C_COMPILE_OPTIONS_VISIBILITY (it's the C-specific variant of
# CMAKE_<LANG>_COMPILE_OPTIONS_VISIBILITY) which contains the compiler
# command line option for visibility support. It's empty or unset when
# visibility isn't supported. (It was added to CMake 2.8.12 in the commit
# 0e9f4bc00c6b26f254e74063e4026ac33b786513 in 2013.) This way we don't
# set HAVE_VISIBILITY to 1 when visibility isn't actually supported.
if(BUILD_SHARED_LIBS AND CMAKE_C_COMPILE_OPTIONS_VISIBILITY)
    set_target_properties(liblzma PROPERTIES C_VISIBILITY_PRESET hidden)
    target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=1)
else()
    target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=0)
endif()

if(WIN32)
    if(BUILD_SHARED_LIBS)
        # Add the Windows resource file for liblzma.dll.
        target_sources(liblzma PRIVATE src/liblzma/liblzma_w32res.rc)

        set_target_properties(liblzma PROPERTIES
            LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
        )

        # Export the public API symbols with __declspec(dllexport).
        target_compile_definitions(liblzma PRIVATE DLL_EXPORT)

        if(NOT MSVC)
            # Create a DEF file. The linker puts the ordinal numbers there
            # too so the output from the linker isn't our final file.
            target_link_options(liblzma PRIVATE
                                "-Wl,--output-def,liblzma.def.in")

            # Remove the ordinal numbers from the DEF file so that
            # no one will create an import library that links by ordinal
            # instead of by name. We don't maintain a DEF file so the
            # ordinal numbers aren't stable.
            add_custom_command(TARGET liblzma POST_BUILD
                COMMAND "${CMAKE_COMMAND}"
                    -DINPUT_FILE=liblzma.def.in
                    -DOUTPUT_FILE=liblzma.def
                    -P
                    "${CMAKE_CURRENT_SOURCE_DIR}/cmake/remove-ordinals.cmake"
                BYPRODUCTS "liblzma.def"
                VERBATIM)
        endif()
    else()
        # Disable __declspec(dllimport) when linking against static liblzma.
        target_compile_definitions(liblzma INTERFACE LZMA_API_STATIC)
    endif()
elseif(BUILD_SHARED_LIBS AND CMAKE_SYSTEM_NAME STREQUAL "Linux" AND
       NOT CMAKE_SYSTEM_PROCESSOR MATCHES "[Mm]icro[Bb]laze")
    # GNU/Linux-specific symbol versioning for shared liblzma.
    # This includes a few extra compatibility symbols for RHEL/CentOS 7
    # which are pointless on non-glibc non-Linux systems.
    #
    # As a special case, GNU/Linux on MicroBlaze gets the generic
    # symbol versioning because GCC 12 doesn't support the __symver__
    # attribute on MicroBlaze. On Linux, CMAKE_SYSTEM_PROCESSOR comes
    # from "uname -m" for native builds (should be "microblaze") or from
    # the CMake toolchain file (not perfectly standardized but it very
    # likely has "microblaze" in lower case or mixed case somewhere in
    # the string).
    #
    # FIXME? Avoid symvers on Linux with non-glibc like musl?
    #
    # Note that adding link options doesn't affect static builds
    # but HAVE_SYMBOL_VERSIONS_LINUX must not be used with static builds
    # because it would put symbol versions into the static library which
    # can cause problems. It's clearer if all symver related things are
    # omitted when not building a shared library.
    #
    # NOTE: Set it explicitly to 1 to make it clear that versioning is
    # done unconditionally in the C files.
    target_compile_definitions(liblzma PRIVATE HAVE_SYMBOL_VERSIONS_LINUX=1)
    target_link_options(liblzma PRIVATE
        "-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map"
    )
    set_target_properties(liblzma PROPERTIES
        LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map"
    )
elseif(BUILD_SHARED_LIBS AND (CMAKE_SYSTEM_NAME STREQUAL "FreeBSD" OR
                              CMAKE_SYSTEM_NAME STREQUAL "Linux"))
    # Generic symbol versioning for shared liblzma is used on FreeBSD and
    # also on GNU/Linux on MicroBlaze.
    target_link_options(liblzma PRIVATE
        "-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map"
    )
    set_target_properties(liblzma PROPERTIES
        LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map"
    )
endif()

set_target_properties(liblzma PROPERTIES
    # At least for now the package versioning matches the rules used for
    # shared library versioning (excluding development releases) so it is
    # fine to use the package version here.
    SOVERSION "${xz_VERSION_MAJOR}"
    VERSION "${xz_VERSION}"

    # It's liblzma.so or liblzma.dll, not libliblzma.so or lzma.dll.
    # Avoid the name lzma.dll because it would conflict with LZMA SDK.
    PREFIX ""
    IMPORT_PREFIX ""
)

# Create liblzma-config-version.cmake.
#
# FIXME: SameMajorVersion is correct for stable releases but it is wrong
# for development releases where each release may have incompatible changes.
include(CMakePackageConfigHelpers)
write_basic_package_version_file(
    "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake"
    VERSION "${liblzma_VERSION}"
    COMPATIBILITY SameMajorVersion)

# Create liblzma-config.cmake. We use this spelling instead of
# liblzmaConfig.cmake to make find_package work in case insensitive
# manner even with case sensitive file systems. This gives more consistent
# behavior between operating systems. This optionally includes a dependency
# on a threading library, so the contents are created in two separate parts.
# The "second half" is always needed, so create it first.
set(LZMA_CONFIG_CONTENTS
"include(\"\${CMAKE_CURRENT_LIST_DIR}/liblzma-targets.cmake\")

if(NOT TARGET LibLZMA::LibLZMA)
    # Be compatible with the spelling used by the FindLibLZMA module. This
    # doesn't use ALIAS because it would make CMake resolve LibLZMA::LibLZMA
    # to liblzma::liblzma instead of keeping the original spelling. Keeping
    # the original spelling is important for good FindLibLZMA compatibility.
    add_library(LibLZMA::LibLZMA INTERFACE IMPORTED)
    set_target_properties(LibLZMA::LibLZMA PROPERTIES
                          INTERFACE_LINK_LIBRARIES liblzma::liblzma)
endif()
")

if(USE_POSIX_THREADS)
    set(LZMA_CONFIG_CONTENTS
"include(CMakeFindDependencyMacro)
set(THREADS_PREFER_PTHREAD_FLAG TRUE)
find_dependency(Threads)

${LZMA_CONFIG_CONTENTS}
")
endif()

file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake"
        "${LZMA_CONFIG_CONTENTS}")

# Create liblzma.pc.
set(prefix "${CMAKE_INSTALL_PREFIX}")
set(exec_prefix "${CMAKE_INSTALL_PREFIX}")
set(libdir "${CMAKE_INSTALL_FULL_LIBDIR}")
set(includedir "${CMAKE_INSTALL_FULL_INCLUDEDIR}")
set(PTHREAD_CFLAGS "${CMAKE_THREAD_LIBS_INIT}")
configure_file(src/liblzma/liblzma.pc.in liblzma.pc
               @ONLY
               NEWLINE_STYLE LF)

# Install the library binary. The INCLUDES specifies the include path that
# is exported for other projects to use but it doesn't install any files.
install(TARGETS liblzma EXPORT liblzmaTargets
        RUNTIME  DESTINATION "${CMAKE_INSTALL_BINDIR}"
                 COMPONENT liblzma_Runtime
        LIBRARY  DESTINATION "${CMAKE_INSTALL_LIBDIR}"
                 COMPONENT liblzma_Runtime
                 NAMELINK_COMPONENT liblzma_Development
        ARCHIVE  DESTINATION "${CMAKE_INSTALL_LIBDIR}"
                 COMPONENT liblzma_Development
        INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}")

# Install the liblzma API headers. These use a subdirectory so
# this has to be done as a separate step.
install(DIRECTORY src/liblzma/api/
        COMPONENT liblzma_Development
        DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
        FILES_MATCHING PATTERN "*.h")

# Install the CMake files that other packages can use to find liblzma.
set(liblzma_INSTALL_CMAKEDIR
    "${CMAKE_INSTALL_LIBDIR}/cmake/liblzma"
    CACHE STRING "Path to liblzma's .cmake files")

install(EXPORT liblzmaTargets
        NAMESPACE liblzma::
        FILE liblzma-targets.cmake
        DESTINATION "${liblzma_INSTALL_CMAKEDIR}"
        COMPONENT liblzma_Development)

install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake"
              "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake"
        DESTINATION "${liblzma_INSTALL_CMAKEDIR}"
        COMPONENT liblzma_Development)

if(NOT MSVC)
    install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzma.pc"
            DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig"
            COMPONENT liblzma_Development)
endif()


#############################################################################
# Helper functions for installing files
#############################################################################

# For each non-empty element in the list LINK_NAMES, creates symbolic links
# ${LINK_NAME}${LINK_SUFFIX} -> ${TARGET_NAME} in the directory ${DIR}.
# The target file should exist because on Cygwin and MSYS2 symlink creation
# can fail under certain conditions if the target doesn't exist.
function(my_install_symlinks COMPONENT DIR TARGET_NAME LINK_SUFFIX LINK_NAMES)
    install(CODE "set(D \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${DIR}\")
                 foreach(L ${LINK_NAMES})
                     file(CREATE_LINK \"${TARGET_NAME}\"
                                      \"\${D}/\${L}${LINK_SUFFIX}\"
                                      SYMBOLIC)
                 endforeach()"
            COMPONENT "${COMPONENT}")
endfunction()

# Installs a man page file of a given language ("" for the untranslated file)
# and optionally its alternative names as symlinks. This is a helper function
# for my_install_man() below.
function(my_install_man_lang COMPONENT SRC_FILE MAN_LANG LINK_NAMES)
    # Get the man page section from the filename suffix.
    string(REGEX REPLACE "^.*\.([^/.]+)$" "\\1" MAN_SECTION "${SRC_FILE}")

    # A few man pages might be missing from translations.
    # Don't attempt to install them or create the related symlinks.
    if(NOT MAN_LANG STREQUAL "" AND NOT EXISTS "${SRC_FILE}")
        return()
    endif()

    # Installing the file must be done before creating the symlinks
    # due to Cygwin and MSYS2.
    install(FILES "${SRC_FILE}"
            DESTINATION "${CMAKE_INSTALL_MANDIR}/${MAN_LANG}/man${MAN_SECTION}"
            COMPONENT "${COMPONENT}")

    # Get the basename of the file to be used as the symlink target.
    get_filename_component(BASENAME "${SRC_FILE}" NAME)

    # LINK_NAMES don't contain the man page filename suffix (like ".1")
    # so it needs to be told to my_install_symlinks.
    my_install_symlinks("${COMPONENT}"
                        "${CMAKE_INSTALL_MANDIR}/${MAN_LANG}/man${MAN_SECTION}"
                        "${BASENAME}" ".${MAN_SECTION}" "${LINK_NAMES}")
endfunction()

# Installs a man page file and optionally its alternative names as symlinks.
# Does the same for translations if ENABLE_NLS.
function(my_install_man COMPONENT SRC_FILE LINK_NAMES)
    my_install_man_lang("${COMPONENT}" "${SRC_FILE}" "" "${LINK_NAMES}")

    if(ENABLE_NLS)
        # Find the translated versions of this man page.
        get_filename_component(BASENAME "${SRC_FILE}" NAME)
        file(GLOB MAN_FILES "po4a/man/*/${BASENAME}")

        foreach(F ${MAN_FILES})
            get_filename_component(MAN_LANG "${F}" DIRECTORY)
            get_filename_component(MAN_LANG "${MAN_LANG}" NAME)
            my_install_man_lang("${COMPONENT}" "${F}" "${MAN_LANG}"
                                "${LINK_NAMES}")
        endforeach()
    endif()
endfunction()


#############################################################################
# libgnu (getopt_long)
#############################################################################

# This mirrors how the Autotools build system handles the getopt_long
# replacement, calling the object library libgnu since the replacement
# version comes from Gnulib.
add_library(libgnu OBJECT)

# CMake requires that even an object library must have at least once source
# file. So we give it a header file that results in no output files.
#
# NOTE: Using a file outside the lib directory makes it possible to
# delete lib/*.h and lib/*.c and still keep the build working if
# getopt_long replacement isn't needed. It's convenient if one wishes
# to be certain that no GNU LGPL code gets included in the binaries.
target_sources(libgnu PRIVATE src/common/sysdefs.h)

# The Ninja Generator requires setting the linker language since it cannot
# guess the programming language of just a header file. Setting this
# property avoids needing an empty .c file or an non-empty unnecessary .c
# file.
set_target_properties(libgnu PROPERTIES LINKER_LANGUAGE C)

# Create /lib directory in the build directory and add it to the include path.
file(MAKE_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/lib")
target_include_directories(libgnu PUBLIC "${CMAKE_CURRENT_BINARY_DIR}/lib")

# Include /lib from the source directory. It does no harm even if none of
# the Gnulib replacements are used.
target_include_directories(libgnu PUBLIC lib)

# The command line tools need getopt_long in order to parse arguments. If
# the system does not have a getopt_long implementation we can use the one
# from Gnulib instead.
check_symbol_exists(getopt_long getopt.h HAVE_GETOPT_LONG)

if(NOT HAVE_GETOPT_LONG)
    # Set the __GETOPT_PREFIX definition to "rpl_" (replacement) to avoid
    # name conflicts with libc symbols. The same prefix is set if using
    # the Autotools build (m4/getopt.m4).
    target_compile_definitions(libgnu PUBLIC "__GETOPT_PREFIX=rpl_")

    # Create a custom copy command to copy the getopt header to the build
    # directory and re-copy it if it is updated. (Gnulib does it this way
    # because it allows choosing which .in.h files to actually use in the
    # build. We need just getopt.h so this is a bit overcomplicated for
    # a single header file only.)
    add_custom_command(OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/lib/getopt.h"
        COMMAND "${CMAKE_COMMAND}" -E copy
            "${CMAKE_CURRENT_SOURCE_DIR}/lib/getopt.in.h"
            "${CMAKE_CURRENT_BINARY_DIR}/lib/getopt.h"
        MAIN_DEPENDENCY "${CMAKE_CURRENT_SOURCE_DIR}/lib/getopt.in.h"
        VERBATIM)

    target_sources(libgnu PRIVATE
        lib/getopt1.c
        lib/getopt.c
        lib/getopt_int.h
        lib/getopt-cdefs.h
        lib/getopt-core.h
        lib/getopt-ext.h
        lib/getopt-pfx-core.h
        lib/getopt-pfx-ext.h
        "${CMAKE_CURRENT_BINARY_DIR}/lib/getopt.h"
    )
endif()


#############################################################################
# xzdec and lzmadec
#############################################################################

if(HAVE_DECODERS AND (NOT MSVC OR MSVC_VERSION GREATER_EQUAL 1900))
    foreach(XZDEC xzdec lzmadec)
        add_executable("${XZDEC}"
            src/common/sysdefs.h
            src/common/tuklib_common.h
            src/common/tuklib_config.h
            src/common/tuklib_exit.c
            src/common/tuklib_exit.h
            src/common/tuklib_gettext.h
            src/common/tuklib_progname.c
            src/common/tuklib_progname.h
            src/xzdec/xzdec.c
        )

        target_include_directories("${XZDEC}" PRIVATE
            src/common
            src/liblzma/api
        )

        target_link_libraries("${XZDEC}" PRIVATE liblzma libgnu)

        if(WIN32)
            # Add the Windows resource file for xzdec.exe or lzmadec.exe.
            target_sources("${XZDEC}" PRIVATE src/xzdec/xzdec_w32res.rc)
            set_target_properties("${XZDEC}" PROPERTIES
                LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
            )
        endif()

        if(SANDBOX_COMPILE_DEFINITION)
            target_compile_definitions("${XZDEC}" PRIVATE
                                    "${SANDBOX_COMPILE_DEFINITION}")
        endif()

        tuklib_progname("${XZDEC}")

        install(TARGETS "${XZDEC}"
                RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
                        COMPONENT "${XZDEC}_Runtime")
    endforeach()

    # This is the only build-time difference with lzmadec.
    target_compile_definitions(lzmadec PRIVATE "LZMADEC")

    if(UNIX)
        # NOTE: This puts the lzmadec.1 symlinks into xzdec_Documentation.
        # This isn't great but doing them separately with translated
        # man pages would require extra code. So this has to suffice for now.
        my_install_man(xzdec_Documentation src/xzdec/xzdec.1 lzmadec)
    endif()
endif()


#############################################################################
# lzmainfo
#############################################################################

if(HAVE_DECODERS AND (NOT MSVC OR MSVC_VERSION GREATER_EQUAL 1900))
    add_executable(lzmainfo
        src/common/sysdefs.h
        src/common/tuklib_common.h
        src/common/tuklib_config.h
        src/common/tuklib_exit.c
        src/common/tuklib_exit.h
        src/common/tuklib_gettext.h
        src/common/tuklib_progname.c
        src/common/tuklib_progname.h
        src/lzmainfo/lzmainfo.c
    )

    target_include_directories(lzmainfo PRIVATE
        src/common
        src/liblzma/api
    )

    target_link_libraries(lzmainfo PRIVATE liblzma libgnu)

    if(WIN32)
        # Add the Windows resource file for lzmainfo.exe.
        target_sources(lzmainfo PRIVATE src/lzmainfo/lzmainfo_w32res.rc)
        set_target_properties(lzmainfo PROPERTIES
            LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
        )
    endif()

    tuklib_progname(lzmainfo)

    # NOTE: The translations are in the "xz" domain and the .mo files are
    # installed as part of the "xz" target.
    if(ENABLE_NLS)
        target_link_libraries(lzmainfo PRIVATE Intl::Intl)

        target_compile_definitions(lzmainfo PRIVATE
                ENABLE_NLS
                PACKAGE="${TRANSLATION_DOMAIN}"
                LOCALEDIR="${LOCALEDIR_DEFINITION}"
        )
    endif()

    install(TARGETS lzmainfo
            RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
                    COMPONENT lzmainfo_Runtime)

    if(UNIX)
        my_install_man(lzmainfo_Documentation src/lzmainfo/lzmainfo.1 "")
    endif()
endif()


#############################################################################
# xz
#############################################################################

if(NOT MSVC OR MSVC_VERSION GREATER_EQUAL 1900)
    add_executable(xz
        src/common/mythread.h
        src/common/sysdefs.h
        src/common/tuklib_common.h
        src/common/tuklib_config.h
        src/common/tuklib_exit.c
        src/common/tuklib_exit.h
        src/common/tuklib_gettext.h
        src/common/tuklib_integer.h
        src/common/tuklib_mbstr.h
        src/common/tuklib_mbstr_fw.c
        src/common/tuklib_mbstr_width.c
        src/common/tuklib_open_stdxxx.c
        src/common/tuklib_open_stdxxx.h
        src/common/tuklib_progname.c
        src/common/tuklib_progname.h
        src/xz/args.c
        src/xz/args.h
        src/xz/coder.c
        src/xz/coder.h
        src/xz/file_io.c
        src/xz/file_io.h
        src/xz/hardware.c
        src/xz/hardware.h
        src/xz/main.c
        src/xz/main.h
        src/xz/message.c
        src/xz/message.h
        src/xz/mytime.c
        src/xz/mytime.h
        src/xz/options.c
        src/xz/options.h
        src/xz/private.h
        src/xz/sandbox.c
        src/xz/sandbox.h
        src/xz/signals.c
        src/xz/signals.h
        src/xz/suffix.c
        src/xz/suffix.h
        src/xz/util.c
        src/xz/util.h
    )

    target_include_directories(xz PRIVATE
        src/common
        src/liblzma/api
    )

    if(HAVE_DECODERS)
        target_sources(xz PRIVATE
            src/xz/list.c
            src/xz/list.h
        )
    endif()

    target_link_libraries(xz PRIVATE liblzma libgnu)

    target_compile_definitions(xz PRIVATE ASSUME_RAM=128)

    if(WIN32)
        # Add the Windows resource file for xz.exe.
        target_sources(xz PRIVATE src/xz/xz_w32res.rc)
        set_target_properties(xz PROPERTIES
            LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc"
        )
    endif()

    if(SANDBOX_COMPILE_DEFINITION)
        target_compile_definitions(xz PRIVATE "${SANDBOX_COMPILE_DEFINITION}")
    endif()

    tuklib_progname(xz)
    tuklib_mbstr(xz)

    check_symbol_exists(optreset getopt.h HAVE_OPTRESET)
    tuklib_add_definition_if(xz HAVE_OPTRESET)

    check_symbol_exists(posix_fadvise fcntl.h HAVE_POSIX_FADVISE)
    tuklib_add_definition_if(xz HAVE_POSIX_FADVISE)

    # How to get file time:
    check_struct_has_member("struct stat" st_atim.tv_nsec
                            "sys/types.h;sys/stat.h"
                            HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
    if(HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
        tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC)
    else()
        check_struct_has_member("struct stat" st_atimespec.tv_nsec
                                "sys/types.h;sys/stat.h"
                                HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
        if(HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
            tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC)
        else()
            check_struct_has_member("struct stat" st_atimensec
                                    "sys/types.h;sys/stat.h"
                                    HAVE_STRUCT_STAT_ST_ATIMENSEC)
            tuklib_add_definition_if(xz HAVE_STRUCT_STAT_ST_ATIMENSEC)
        endif()
    endif()

    # How to set file time:
    check_symbol_exists(futimens "sys/types.h;sys/stat.h" HAVE_FUTIMENS)
    if(HAVE_FUTIMENS)
        tuklib_add_definitions(xz HAVE_FUTIMENS)
    else()
        check_symbol_exists(futimes "sys/time.h" HAVE_FUTIMES)
        if(HAVE_FUTIMES)
            tuklib_add_definitions(xz HAVE_FUTIMES)
        else()
            check_symbol_exists(futimesat "sys/time.h" HAVE_FUTIMESAT)
            if(HAVE_FUTIMESAT)
                tuklib_add_definitions(xz HAVE_FUTIMESAT)
            else()
                check_symbol_exists(utimes "sys/time.h" HAVE_UTIMES)
                if(HAVE_UTIMES)
                    tuklib_add_definitions(xz HAVE_UTIMES)
                else()
                    check_symbol_exists(_futime "sys/utime.h" HAVE__FUTIME)
                    if(HAVE__FUTIME)
                        tuklib_add_definitions(xz HAVE__FUTIME)
                    else()
                        check_symbol_exists(utime "utime.h" HAVE_UTIME)
                        tuklib_add_definition_if(xz HAVE_UTIME)
                    endif()
                endif()
            endif()
        endif()
    endif()

    if(ENABLE_NLS)
        target_link_libraries(xz PRIVATE Intl::Intl)

        target_compile_definitions(xz PRIVATE
                ENABLE_NLS
                PACKAGE="${TRANSLATION_DOMAIN}"
                LOCALEDIR="${LOCALEDIR_DEFINITION}"
        )

        file(STRINGS po/LINGUAS LINGUAS)

        # Where to find .gmo files. If msgfmt is available, the .po files
        # will be converted as part of the build. Otherwise we will use
        # the pre-generated .gmo files which are included in XZ Utils
        # tarballs by Autotools.
        set(GMO_DIR "${CMAKE_CURRENT_SOURCE_DIR}/po")

        if(GETTEXT_FOUND)
            # NOTE: gettext_process_po_files' INSTALL_DESTINATION is
            # incompatible with how Autotools requires the .po files to
            # be named. CMake would require each .po file to be named with
            # the translation domain and thus each .po file would need its
            # own language-specific directory (like "po/fi/xz.po"). On top
            # of this, INSTALL_DESTINATION doesn't allow specifying COMPONENT
            # and thus the .mo files go into "Unspecified" component. So we
            # can use gettext_process_po_files to convert the .po files but
            # installation needs to be done with our own code.
            #
            # Also, the .gmo files will go to root of the build directory
            # instead of neatly into a subdirectory. This is hardcoded in
            # CMake's FindGettext.cmake.
            foreach(LANG IN LISTS LINGUAS)
                gettext_process_po_files("${LANG}" ALL
                        PO_FILES "${CMAKE_CURRENT_SOURCE_DIR}/po/${LANG}.po")
            endforeach()

            set(GMO_DIR "${CMAKE_CURRENT_BINARY_DIR}")
        endif()

        foreach(LANG IN LISTS LINGUAS)
            install(
                FILES "${GMO_DIR}/${LANG}.gmo"
                DESTINATION "${CMAKE_INSTALL_LOCALEDIR}/${LANG}/LC_MESSAGES"
                RENAME "${TRANSLATION_DOMAIN}.mo"
                COMPONENT xz_Runtime)
        endforeach()
    endif()

    # This command must be before the symlink creation to keep things working
    # on Cygwin and MSYS2 in all cases.
    #
    #   - Cygwin can encode symlinks in multiple ways. This can be
    #     controlled via the environment variable "CYGWIN". If it contains
    #     "winsymlinks:nativestrict" then symlink creation will fail if
    #     the link target doesn't exist. This mode isn't the default though.
    #     See: https://cygwin.com/faq.html#faq.api.symlinks
    #
    #   - MSYS2 supports the same winsymlinks option in the environment
    #     variable "MSYS" (not "MSYS2). The default in MSYS2 is to make
    #     a copy of the file instead of any kind of symlink. Thus the link
    #     target must exist or the creation of the "symlink" (copy) will fail.
    #
    # Our installation order must be such that when a symbolic link is created
    # its target must already exists. There is no race condition for parallel
    # builds because the generated cmake_install.cmake executes serially.
    install(TARGETS xz
            RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}"
                    COMPONENT xz_Runtime)

    if(UNIX)
        option(CREATE_XZ_SYMLINKS "Create unxz and xzcat symlinks" ON)
        option(CREATE_LZMA_SYMLINKS "Create lzma, unlzma, and lzcat symlinks"
               ON)
        set(XZ_LINKS)

        if(CREATE_XZ_SYMLINKS)
            list(APPEND XZ_LINKS "unxz" "xzcat")
        endif()

        if(CREATE_LZMA_SYMLINKS)
            list(APPEND XZ_LINKS "lzma" "unlzma" "lzcat")
        endif()

        # On Cygwin, don't add the .exe suffix to the symlinks.
        #
        # FIXME? Does this make sense on MSYS & MSYS2 where "ln -s"
        # by default makes copies? Inside MSYS & MSYS2 it is possible
        # to execute files without the .exe suffix but not outside
        # (like in Command Prompt). Omitting the suffix matches
        # what configure.ac has done for many years though.
        my_install_symlinks(xz_Runtime "${CMAKE_INSTALL_BINDIR}"
                            "xz${CMAKE_EXECUTABLE_SUFFIX}" "" "${XZ_LINKS}")

        # Install the man pages and (optionally) their symlinks
        # and translations.
        my_install_man(xz_Documentation src/xz/xz.1 "${XZ_LINKS}")
    endif()
endif()


#############################################################################
# Scripts
#############################################################################

if(UNIX)
    # NOTE: This isn't as sophisticated as in the Autotools build which
    # uses posix-shell.m4 but hopefully this doesn't need to be either.
    # CMake likely won't be used on as many (old) obscure systems as the
    # Autotools-based builds are.
    if(CMAKE_SYSTEM_NAME STREQUAL "SunOS" AND EXISTS "/usr/xpg4/bin/sh")
        set(POSIX_SHELL_DEFAULT "/usr/xpg4/bin/sh")
    else()
        set(POSIX_SHELL_DEFAULT "/bin/sh")
    endif()

    set(POSIX_SHELL "${POSIX_SHELL_DEFAULT}" CACHE STRING
        "Shell to use for scripts (xzgrep and others)")

    # Guess the extra path to add from POSIX_SHELL. Autotools-based build
    # has a separate option --enable-path-for-scripts=PREFIX but this is
    # enough for Solaris.
    set(enable_path_for_scripts)
    get_filename_component(POSIX_SHELL_DIR "${POSIX_SHELL}" DIRECTORY)

    if(NOT POSIX_SHELL_DIR STREQUAL "/bin" AND
            NOT POSIX_SHELL_DIR STREQUAL "/usr/bin")
        set(enable_path_for_scripts "PATH=${POSIX_SHELL_DIR}:\$PATH")
    endif()

    set(XZDIFF_LINKS xzcmp)
    set(XZGREP_LINKS xzegrep xzfgrep)
    set(XZMORE_LINKS)
    set(XZLESS_LINKS)

    if(CREATE_LZMA_SYMLINKS)
        list(APPEND XZDIFF_LINKS lzdiff lzcmp)
        list(APPEND XZGREP_LINKS lzgrep lzegrep lzfgrep)
        list(APPEND XZMORE_LINKS lzmore)
        list(APPEND XZLESS_LINKS lzless)
    endif()

    set(xz "xz")

    foreach(S xzdiff xzgrep xzmore xzless)
        configure_file("src/scripts/${S}.in" "${S}"
               @ONLY
               NEWLINE_STYLE LF)

        install(PROGRAMS "${CMAKE_CURRENT_BINARY_DIR}/${S}"
                DESTINATION "${CMAKE_INSTALL_BINDIR}"
                COMPONENT scripts_Runtime)
    endforeach()

    # file(CHMOD ...) would need CMake 3.19 so use execute_process instead.
    # Using +x is fine even if umask was 077. If execute bit is set at all
    # then "make install" will set it for group and other access bits too.
    execute_process(COMMAND chmod +x xzdiff xzgrep xzmore xzless
                    WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}")

    unset(xz)
    unset(POSIX_SHELL)
    unset(enable_path_for_scripts)

    my_install_symlinks(scripts_Runtime "${CMAKE_INSTALL_BINDIR}" xzdiff ""
                        "${XZDIFF_LINKS}")

    my_install_symlinks(scripts_Runtime "${CMAKE_INSTALL_BINDIR}" xzgrep ""
                        "${XZGREP_LINKS}")

    my_install_symlinks(scripts_Runtime "${CMAKE_INSTALL_BINDIR}" xzmore ""
                        "${XZMORE_LINKS}")

    my_install_symlinks(scripts_Runtime "${CMAKE_INSTALL_BINDIR}" xzless ""
                        "${XZLESS_LINKS}")

    my_install_man(scripts_Documentation src/scripts/xzdiff.1 "${XZDIFF_LINKS}")
    my_install_man(scripts_Documentation src/scripts/xzgrep.1 "${XZGREP_LINKS}")
    my_install_man(scripts_Documentation src/scripts/xzmore.1 "${XZMORE_LINKS}")
    my_install_man(scripts_Documentation src/scripts/xzless.1 "${XZLESS_LINKS}")
endif()


#############################################################################
# Documentation
#############################################################################

# Use OPTIONAL because doc/api might not exist. The liblzma API docs
# can be generated by running "doxygen/update-doxygen".
install(DIRECTORY doc/api doc/examples
        DESTINATION "${CMAKE_INSTALL_DOCDIR}"
        COMPONENT liblzma_Documentation
        OPTIONAL)

# GPLv2 applies to the scripts. If GNU getopt_long is used then
# LGPLv2.1 applies to the command line tools but, using the
# section 3 of LGPLv2.1, GNU getopt_long can be handled as GPLv2 too.
# Thus GPLv2 should be enough here.
install(FILES AUTHORS
              COPYING
              COPYING.0BSD
              COPYING.GPLv2
              NEWS
              README
              THANKS
              doc/faq.txt
              doc/history.txt
              doc/lzma-file-format.txt
              doc/xz-file-format.txt
        DESTINATION "${CMAKE_INSTALL_DOCDIR}"
        COMPONENT Documentation)


#############################################################################
# Tests
#############################################################################

include(CTest)

if(BUILD_TESTING)
    set(LIBLZMA_TESTS
        test_bcj_exact_size
        test_block_header
        test_check
        test_filter_flags
        test_filter_str
        test_hardware
        test_index
        test_index_hash
        test_lzip_decoder
        test_memlimit
        test_stream_flags
        test_vli
    )

    foreach(TEST IN LISTS LIBLZMA_TESTS)
        add_executable("${TEST}" "tests/${TEST}.c")

        target_include_directories("${TEST}" PRIVATE
            src/common
            src/liblzma/api
            src/liblzma
        )

        target_link_libraries("${TEST}" PRIVATE liblzma)

        # Put the test programs into their own subdirectory so they don't
        # pollute the top-level dir which might contain xz and xzdec.
        set_target_properties("${TEST}" PROPERTIES
            RUNTIME_OUTPUT_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/tests_bin"
        )

        add_test(NAME "${TEST}"
                 COMMAND "${CMAKE_CURRENT_BINARY_DIR}/tests_bin/${TEST}"
        )

        # Set srcdir environment variable so that the tests find their
        # input files from the source tree.
        #
        # Set the return code for skipped tests to match Automake convention.
        set_tests_properties("${TEST}" PROPERTIES
            ENVIRONMENT "srcdir=${CMAKE_CURRENT_SOURCE_DIR}/tests"
            SKIP_RETURN_CODE 77
        )
    endforeach()

    if(UNIX AND HAVE_DECODERS)
        file(MAKE_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/test_scripts")

        add_test(NAME test_scripts.sh
            COMMAND "${CMAKE_CURRENT_SOURCE_DIR}/tests/test_scripts.sh" ".."
            WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/test_scripts"
        )

        set_tests_properties(test_scripts.sh PROPERTIES
            ENVIRONMENT "srcdir=${CMAKE_CURRENT_SOURCE_DIR}/tests"
            SKIP_RETURN_CODE 77
        )
    endif()
endif()